Marged chris/win32/merge/07-win32-fixes at r210 to trunk

1 files changed, 143 insertions, 0 deletions

diff --git a/bin/bbackupd/win32/bbackupd.conf b/bin/bbackupd/win32/bbackupd.conf
new file mode 100644
index 00000000..85915520
--- /dev/null
+++ b/bin/bbackupd/win32/bbackupd.conf
@@ -0,0 +1,143 @@
+
+StoreHostname = yourhost
+AccountNumber = 0x1
+KeysFile = C:\Program Files\Box Backup\1-FileEncKeys.raw
+
+CertificateFile = C:\Program Files\Box Backup\1-cert.pem
+PrivateKeyFile = C:\Program Files\Box Backup\1-key.pem
+TrustedCAsFile = C:\Program Files\Box Backup\serverCA.pem
+
+DataDirectory = C:\Program Files\Box Backup\bbackupd
+
+# If you do not install it in the default location - also do not forget to 
+# change the pid file location (below)
+
+
+# This script is run whenever bbackupd encounters a problem which requires
+# the system administrator to assist:
+# 1) The store is full, and no more data can be uploaded.
+# 2) Some files or directories were not readable.
+# The default script emails the system administrator.
+
+# NotifyScript = NotifySysadmin.sh
+
+
+# A scan of the local discs will be made once an hour (approximately).
+# To avoid cycles of load on the server, this time is randomly adjusted by a small
+# percentage as the daemon runs.
+
+UpdateStoreInterval = 3600
+
+
+# A file must have been modified at least 6 hours ago before it will be uploaded.
+
+MinimumFileAge = 21600
+
+
+# If a file is modified repeated, it won't be uploaded immediately in case it's modified again.
+# However, it should be uploaded eventually. This is how long we should wait after first noticing
+# a change. (1 day)
+
+MaxUploadWait = 86400
+
+
+# Files above this size (in bytes) are tracked, and if they are renamed they will simply be
+# renamed on the server, rather than being uploaded again. (64k - 1)
+
+FileTrackingSizeThreshold = 65535
+
+
+# The daemon does "changes only" uploads for files above this size (in bytes).
+# Files less than it are uploaded whole without this extra processing.
+
+DiffingUploadSizeThreshold = 8192
+
+
+# The limit on how much time is spent diffing files. Most files shouldn't take very long,
+# but if you have really big files you can use this to limit the time spent diffing them.
+# * Reduce if you are having problems with processor usage.
+# * Increase if you have large files, and think the upload of changes is too large and want
+#   to spend more time searching for unchanged blocks.
+
+MaximumDiffingTime = 20
+
+# KeepAliveTime requires Gary's SSL KeepAlive patches
+# KeepAliveTime = 250
+
+# Uncomment this line to see exactly what the daemon is going when it's connected to the server.
+
+# ExtendedLogging = yes
+
+
+# Use this to temporarily stop bbackupd from syncronising or connecting to the store.
+# This specifies a program or script script which is run just before each sync, and ideally
+# the full path to the interpreter. It will be run as the same user bbackupd is running as,
+# usually root.
+# The script prints either "now" or a number to STDOUT (and a terminating newline, no quotes).
+# If the result was "now", then the sync will happen. If it's a number, then the script will
+# be asked again in that number of seconds.
+# For example, you could use this on a laptop to only backup when on a specific network.
+
+# SyncAllowScript = /path/to/intepreter/or/exe script-name parameters etc
+
+
+# Where the command socket is created in the filesystem.
+
+CommandSocket = pipe
+
+
+Server
+{
+	PidFile = C:\Program Files\Box Backup\bbackupd\bbackupd.pid
+}
+
+# StoreObjectInfoFile requires Gary's client marker serialisation patch
+# StoreObjectInfoFile = C:\Program Files\Box Backup\bbackupd\bbackupd.dat
+
+# 
+# BackupLocations specifies which locations on disc should be backed up. Each
+# directory is in the format
+# 
+# 	name
+# 	{
+# 		Path = /path/of/directory
+# 		(optional exclude directives)
+# 	}
+# 
+# 'name' is derived from the Path by the config script, but should merely be
+# unique.
+# 
+# The exclude directives are of the form
+# 
+# 	[Exclude|AlwaysInclude][File|Dir][|sRegex] = regex or full pathname
+# 
+# (The regex suffix is shown as 'sRegex' to make File or Dir plural)
+#
+# For example:
+# 
+# 	ExcludeDir = /home/guest-user
+# 	ExcludeFilesRegex = *.(mp3|MP3)$
+# 	AlwaysIncludeFile = /home/username/veryimportant.mp3
+# 
+# This excludes the directory /home/guest-user from the backup along with all mp3
+# files, except one MP3 file in particular.
+# 
+# In general, Exclude excludes a file or directory, unless the directory is
+# explicitly mentioned in a AlwaysInclude directive.
+# 
+# If a directive ends in Regex, then it is a regular expression rather than a
+# explicit full pathname. See
+# 
+# 	man 7 re_format
+# 
+# for the regex syntax on your platform.
+# 
+
+BackupLocations
+{
+      MyDocuments
+	{
+                Path = C:\Documents and Settings\
+	}
+}
+