MixerClear MixerClear MixerClear Resets all channels of a buss to 0. MixerClear Resets all channels of a buss to 0. Use of the mixer requires that instruments setting gains have smaller numbers than instruments sending signals, and that instruments sending signals have smaller numbers than instruments receiving those signals. However, an instrument may have any number of sends or receives. After the final signal is received, MixerClear must be invoked to reset the busses to 0 before the next kperiod. instr 220 ; Master output ; It applies a bass enhancement, compression and fadeout ; to the whole piece, outputs signals, and clears the mixer. a1 MixerReceive 220, 0 a2 MixerReceive 220, 1 ; Bass enhancement al1 butterlp a1, 100 al2 butterlp a2, 100 a1 = al1*1.5 +a1 a2 = al2*1.5 +a2 ; Global amplitude shape kenv linseg 0., p5 / 2.0, p4, p3 - p5, p4, p5 / 2.0, 0. a1=a1*kenv a2=a2*kenv ; Compression a1 dam a1, 5000, 0.5, 1, 0.2, 0.1 a2 dam a2, 5000, 0.5, 1, 0.2, 0.1 ; Remove DC bias a1blocked dcblock a1 a2blocked dcblock a2 ; Output signals outs a1blocked, a2blocked MixerClear endin Michael Gogins (gogins at pipeline dot com).