pvstanal pvstanal pvstanal Phase vocoder analysis processing with onset detection/processing. pvstanal implements phase vocoder analysis by reading function tables containing sampled-sound sources, with GEN01, and pvstanal will accept deferred allocation tables. This opcode allows for time and frequency-independent scaling. Time is advanced internally, but controlled by a tempo scaling parameter; when an onset is detected, timescaling is momentarily stopped to avoid smearing of attacks. The quality of the effect is generally improved with phase locking switched on. pvstanal will also scale pitch, independently of frequency, using a transposition factor (k-rate). fsig pvstanal ktimescal, kamp, kpitch, ktab, [kdetect, kwrap, ioffset,ifftsize, ihop, idbthresh] ifftsize -- FFT size (power-of-two), defaults to 2048. ihop -- hopsize, defaults to 512 ioffset -- startup read offset into table, in secs. idbthresh -- threshold for onset detection, based on dB power spectrum ratio between two successive windows. A detected ratio above it will cancel timescaling momentarily, to avoid smearing (defaults to 1). By default anything more than a 1 dB inter-frame power difference will be detected as an onset. ktimescal -- timescaling ratio, < 1 stretch, > 1 contract. kamp -- amplitude scaling kpitch -- grain pitch scaling (1=normal pitch, < 1 lower, > 1 higher; negative, backwards) kdetect -- 0 or 1, to switch onset detection/processing. The onset detector checks for power difference between analysis windows. If more than what has been specified in the dbthresh parameter, an onset is declared. It suspends timescaling momentarily so the onsets are not modified. ktab -- source signal function table. Deferred-allocation tables (see GEN01) are accepted, but the opcode expects a mono source. Tables can be switched at k-rate. kwrap -- 0 or 1, to switch on/off table wrap-around read (default to 1) Here is an example of the pvstanal opcode. It uses the file pvstanal.csd. See the sections Real-time Audio and Command Line Flags for more information on using command line flags. Author: &namevictor; February 2010 New plugin in version 5.13 February 2005.