diff options
| -rw-r--r-- | INSTALL | 322 | ||||
| -rw-r--r-- | Makefile.in | 87 | ||||
| -rw-r--r-- | aclocal.m4 | 191 | ||||
| -rw-r--r-- | bjnp-commands.c | 2 | ||||
| -rwxr-xr-x | compile | 8 | ||||
| -rwxr-xr-x | configure | 211 | ||||
| -rw-r--r-- | configure.ac | 2 | ||||
| -rwxr-xr-x | depcomp | 8 | ||||
| -rwxr-xr-x | install-sh | 45 | ||||
| -rwxr-xr-x | missing | 14 |
10 files changed, 459 insertions, 431 deletions
@@ -1,8 +1,8 @@ Installation Instructions ************************* -Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation, -Inc. + Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software +Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright @@ -12,97 +12,96 @@ without warranty of any kind. Basic Installation ================== - Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for + Briefly, the shell command './configure && make && make install' +should configure, build, and install this package. The following +more-detailed instructions are generic; see the 'README' file for instructions specific to this package. Some packages provide this -`INSTALL' file but do not implement all of the features documented +'INSTALL' file but do not implement all of the features documented below. The lack of an optional feature in a given package is not necessarily a bug. More recommendations for GNU packages can be found in *note Makefile Conventions: (standards)Makefile Conventions. - The `configure' shell script attempts to guess correct values for + The 'configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that +those values to create a 'Makefile' in each directory of the package. +It may also create one or more '.h' files containing system-dependent +definitions. Finally, it creates a shell script 'config.status' that you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). +file 'config.log' containing compiler output (useful mainly for +debugging 'configure'). - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. + It can also use an optional file (typically called 'config.cache' and +enabled with '--cache-file=config.cache' or simply '-C') that saves the +results of its tests to speed up reconfiguring. Caching is disabled by +default to prevent problems with accidental use of stale cache files. If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can +to figure out how 'configure' could check whether to do them, and mail +diffs or instructions to the address given in the 'README' so they can be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you +some point 'config.cache' contains results you don't want to keep, you may remove or edit it. - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. + The file 'configure.ac' (or 'configure.in') is used to create +'configure' by a program called 'autoconf'. You need 'configure.ac' if +you want to change it or regenerate 'configure' using a newer version of +'autoconf'. The simplest way to compile this package is: - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. + 1. 'cd' to the directory containing the package's source code and type + './configure' to configure the package for your system. - Running `configure' might take a while. While running, it prints + Running 'configure' might take a while. While running, it prints some messages telling which features it is checking for. - 2. Type `make' to compile the package. + 2. Type 'make' to compile the package. - 3. Optionally, type `make check' to run any self-tests that come with + 3. Optionally, type 'make check' to run any self-tests that come with the package, generally using the just-built uninstalled binaries. - 4. Type `make install' to install the programs and any data files and + 4. Type 'make install' to install the programs and any data files and documentation. When installing into a prefix owned by root, it is recommended that the package be configured and built as a regular - user, and only the `make install' phase executed with root + user, and only the 'make install' phase executed with root privileges. - 5. Optionally, type `make installcheck' to repeat any self-tests, but + 5. Optionally, type 'make installcheck' to repeat any self-tests, but this time using the binaries in their final installed location. This target does not install anything. Running this target as a - regular user, particularly if the prior `make install' required + regular user, particularly if the prior 'make install' required root privileges, verifies that the installation completed correctly. 6. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly + source code directory by typing 'make clean'. To also remove the + files that 'configure' created (so you can compile the package for + a different kind of computer), type 'make distclean'. There is + also a 'make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. - 7. Often, you can also type `make uninstall' to remove the installed + 7. Often, you can also type 'make uninstall' to remove the installed files again. In practice, not all packages have tested that uninstallation works correctly, even though it is required by the GNU Coding Standards. - 8. Some packages, particularly those that use Automake, provide `make + 8. Some packages, particularly those that use Automake, provide 'make distcheck', which can by used by developers to test that all other - targets like `make install' and `make uninstall' work correctly. + targets like 'make install' and 'make uninstall' work correctly. This target is generally not run by end users. Compilers and Options ===================== Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' +the 'configure' script does not know about. Run './configure --help' for details on some of the pertinent environment variables. - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: + You can give 'configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here is +an example: ./configure CC=c99 CFLAGS=-g LIBS=-lposix @@ -113,21 +112,21 @@ Compiling For Multiple Architectures You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the +own directory. To do this, you can use GNU 'make'. 'cd' to the directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. This -is known as a "VPATH" build. +the 'configure' script. 'configure' automatically checks for the source +code in the directory that 'configure' is in and in '..'. This is known +as a "VPATH" build. - With a non-GNU `make', it is safer to compile the package for one + With a non-GNU 'make', it is safer to compile the package for one architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before +installed the package for one architecture, use 'make distclean' before reconfiguring for another architecture. On MacOS X 10.5 and later systems, you can create libraries and executables that work on multiple system types--known as "fat" or -"universal" binaries--by specifying multiple `-arch' options to the -compiler but only a single `-arch' option to the preprocessor. Like +"universal" binaries--by specifying multiple '-arch' options to the +compiler but only a single '-arch' option to the preprocessor. Like this: ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ @@ -136,105 +135,104 @@ this: This is not guaranteed to produce working output in all cases, you may have to build one architecture at a time and combine the results -using the `lipo' tool if you have problems. +using the 'lipo' tool if you have problems. Installation Names ================== - By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX', where PREFIX must be an + By default, 'make install' installs the package's commands under +'/usr/local/bin', include files under '/usr/local/include', etc. You +can specify an installation prefix other than '/usr/local' by giving +'configure' the option '--prefix=PREFIX', where PREFIX must be an absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses +pass the option '--exec-prefix=PREFIX' to 'configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. In general, the -default for these options is expressed in terms of `${prefix}', so that -specifying just `--prefix' will affect all of the other directory +options like '--bindir=DIR' to specify different values for particular +kinds of files. Run 'configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the default +for these options is expressed in terms of '${prefix}', so that +specifying just '--prefix' will affect all of the other directory specifications that were not explicitly provided. The most portable way to affect installation locations is to pass the -correct locations to `configure'; however, many packages provide one or +correct locations to 'configure'; however, many packages provide one or both of the following shortcuts of passing variable assignments to the -`make install' command line to change installation locations without +'make install' command line to change installation locations without having to reconfigure or recompile. The first method involves providing an override variable for each -affected directory. For example, `make install +affected directory. For example, 'make install prefix=/alternate/directory' will choose an alternate location for all directory configuration variables that were expressed in terms of -`${prefix}'. Any directories that were specified during `configure', -but not in terms of `${prefix}', must each be overridden at install -time for the entire installation to be relocated. The approach of -makefile variable overrides for each directory variable is required by -the GNU Coding Standards, and ideally causes no recompilation. -However, some platforms have known limitations with the semantics of -shared libraries that end up requiring recompilation when using this -method, particularly noticeable in packages that use GNU Libtool. - - The second method involves providing the `DESTDIR' variable. For -example, `make install DESTDIR=/alternate/directory' will prepend -`/alternate/directory' before all installation names. The approach of -`DESTDIR' overrides is not required by the GNU Coding Standards, and +'${prefix}'. Any directories that were specified during 'configure', +but not in terms of '${prefix}', must each be overridden at install time +for the entire installation to be relocated. The approach of makefile +variable overrides for each directory variable is required by the GNU +Coding Standards, and ideally causes no recompilation. However, some +platforms have known limitations with the semantics of shared libraries +that end up requiring recompilation when using this method, particularly +noticeable in packages that use GNU Libtool. + + The second method involves providing the 'DESTDIR' variable. For +example, 'make install DESTDIR=/alternate/directory' will prepend +'/alternate/directory' before all installation names. The approach of +'DESTDIR' overrides is not required by the GNU Coding Standards, and does not work on platforms that have drive letters. On the other hand, it does better at avoiding recompilation issues, and works well even -when some directory options were not specified in terms of `${prefix}' -at `configure' time. +when some directory options were not specified in terms of '${prefix}' +at 'configure' time. Optional Features ================= If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the +with an extra prefix or suffix on their names by giving 'configure' the +option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'. + + Some packages pay attention to '--enable-FEATURE' options to +'configure', where FEATURE indicates an optional part of the package. +They may also pay attention to '--with-PACKAGE' options, where PACKAGE +is something like 'gnu-as' or 'x' (for the X Window System). The +'README' should mention any '--enable-' and '--with-' options that the package recognizes. - For packages that use the X Window System, `configure' can usually + For packages that use the X Window System, 'configure' can usually find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. +you can use the 'configure' options '--x-includes=DIR' and +'--x-libraries=DIR' to specify their locations. Some packages offer the ability to configure how verbose the -execution of `make' will be. For these packages, running `./configure +execution of 'make' will be. For these packages, running './configure --enable-silent-rules' sets the default to minimal output, which can be -overridden with `make V=1'; while running `./configure +overridden with 'make V=1'; while running './configure --disable-silent-rules' sets the default to verbose, which can be -overridden with `make V=0'. +overridden with 'make V=0'. Particular systems ================== - On HP-UX, the default C compiler is not ANSI C compatible. If GNU -CC is not installed, it is recommended to use the following options in + On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC +is not installed, it is recommended to use the following options in order to use an ANSI C compiler: ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. - HP-UX `make' updates targets which have the same time stamps as -their prerequisites, which makes it generally unusable when shipped -generated files such as `configure' are involved. Use GNU `make' -instead. + HP-UX 'make' updates targets which have the same time stamps as their +prerequisites, which makes it generally unusable when shipped generated +files such as 'configure' are involved. Use GNU 'make' instead. On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot -parse its `<wchar.h>' header file. The option `-nodtk' can be used as -a workaround. If GNU CC is not installed, it is therefore recommended -to try +parse its '<wchar.h>' header file. The option '-nodtk' can be used as a +workaround. If GNU CC is not installed, it is therefore recommended to +try ./configure CC="cc" @@ -242,26 +240,26 @@ and if that doesn't work, try ./configure CC="cc -nodtk" - On Solaris, don't put `/usr/ucb' early in your `PATH'. This + On Solaris, don't put '/usr/ucb' early in your 'PATH'. This directory contains several dysfunctional programs; working variants of -these programs are available in `/usr/bin'. So, if you need `/usr/ucb' -in your `PATH', put it _after_ `/usr/bin'. +these programs are available in '/usr/bin'. So, if you need '/usr/ucb' +in your 'PATH', put it _after_ '/usr/bin'. - On Haiku, software installed for all users goes in `/boot/common', -not `/usr/local'. It is recommended to use the following options: + On Haiku, software installed for all users goes in '/boot/common', +not '/usr/local'. It is recommended to use the following options: ./configure --prefix=/boot/common Specifying the System Type ========================== - There may be some features `configure' cannot figure out + There may be some features 'configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints +_same_ architectures, 'configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: +'--build=TYPE' option. TYPE can either be a short name for the system +type, such as 'sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM @@ -270,101 +268,101 @@ where SYSTEM can have one of these forms: OS KERNEL-OS - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't + See the file 'config.sub' for the possible values of each field. If +'config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will +use the option '--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. +eventually be run) with '--host=TYPE'. Sharing Defaults ================ - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. + If you want to set default values for 'configure' scripts to share, +you can create a site shell script called 'config.site' that gives +default values for variables like 'CC', 'cache_file', and 'prefix'. +'configure' looks for 'PREFIX/share/config.site' if it exists, then +'PREFIX/etc/config.site' if it exists. Or, you can set the +'CONFIG_SITE' environment variable to the location of the site script. +A warning: not all 'configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run +environment passed to 'configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: +them in the 'configure' command line, using 'VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc -causes the specified `gcc' to be used as the C compiler (unless it is +causes the specified 'gcc' to be used as the C compiler (unless it is overridden in the site shell script). -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf limitation. Until the limitation is lifted, you can use -this workaround: +Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an +Autoconf limitation. Until the limitation is lifted, you can use this +workaround: CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash -`configure' Invocation +'configure' Invocation ====================== - `configure' recognizes the following options to control how it + 'configure' recognizes the following options to control how it operates. -`--help' -`-h' - Print a summary of all of the options to `configure', and exit. +'--help' +'-h' + Print a summary of all of the options to 'configure', and exit. -`--help=short' -`--help=recursive' +'--help=short' +'--help=recursive' Print a summary of the options unique to this package's - `configure', and exit. The `short' variant lists options used - only in the top level, while the `recursive' variant lists options - also present in any nested packages. + 'configure', and exit. The 'short' variant lists options used only + in the top level, while the 'recursive' variant lists options also + present in any nested packages. -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' +'--version' +'-V' + Print the version of Autoconf used to generate the 'configure' script, and exit. -`--cache-file=FILE' +'--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to + traditionally 'config.cache'. FILE defaults to '/dev/null' to disable caching. -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. +'--config-cache' +'-C' + Alias for '--cache-file=config.cache'. -`--quiet' -`--silent' -`-q' +'--quiet' +'--silent' +'-q' Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error + suppress all normal output, redirect it to '/dev/null' (any error messages will still be shown). -`--srcdir=DIR' +'--srcdir=DIR' Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. + 'configure' can determine that directory automatically. -`--prefix=DIR' - Use DIR as the installation prefix. *note Installation Names:: - for more details, including other options available for fine-tuning - the installation locations. +'--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: for + more details, including other options available for fine-tuning the + installation locations. -`--no-create' -`-n' +'--no-create' +'-n' Run the configure checks, but stop before creating any output files. -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. +'configure' also accepts some other, not widely useful, options. Run +'configure --help' for more details. diff --git a/Makefile.in b/Makefile.in index 9867a3f..25fe250 100644 --- a/Makefile.in +++ b/Makefile.in @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2017 Free Software Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -126,7 +126,13 @@ am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles +am__maybe_remake_depfiles = depfiles +am__depfiles_remade = ./$(DEPDIR)/bjnp-bjnp-commands.Po \ + ./$(DEPDIR)/bjnp-bjnp-debug.Po \ + ./$(DEPDIR)/bjnp-bjnp-discover.Po ./$(DEPDIR)/bjnp-bjnp-io.Po \ + ./$(DEPDIR)/bjnp-bjnp-levels.Po \ + ./$(DEPDIR)/bjnp-bjnp-runloop.Po \ + ./$(DEPDIR)/bjnp-bjnp-utils.Po ./$(DEPDIR)/bjnp-bjnp.Po am__mv = mv -f AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) @@ -337,8 +343,8 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -417,14 +423,20 @@ mostlyclean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-commands.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-debug.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-discover.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-levels.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-runloop.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-utils.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-commands.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-debug.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-discover.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-io.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-levels.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-runloop.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp-utils.Po@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bjnp-bjnp.Po@am__quote@ # am--include-marker + +$(am__depfiles_remade): + @$(MKDIR_P) $(@D) + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +am--depfiles: $(am__depfiles_remade) .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @@ -611,7 +623,10 @@ distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files -distdir: $(DISTFILES) +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ @@ -817,7 +832,14 @@ clean-am: clean-cupsbackendPROGRAMS clean-generic mostlyclean-am distclean: distclean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf ./$(DEPDIR) + -rm -f ./$(DEPDIR)/bjnp-bjnp-commands.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-debug.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-discover.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-io.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-levels.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-runloop.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-utils.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp.Po -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-tags @@ -865,7 +887,14 @@ installcheck-am: maintainer-clean: maintainer-clean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache - -rm -rf ./$(DEPDIR) + -rm -f ./$(DEPDIR)/bjnp-bjnp-commands.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-debug.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-discover.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-io.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-levels.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-runloop.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp-utils.Po + -rm -f ./$(DEPDIR)/bjnp-bjnp.Po -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic @@ -885,19 +914,19 @@ uninstall-am: uninstall-cupsbackendPROGRAMS .MAKE: all install-am install-strip -.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \ - clean-cscope clean-cupsbackendPROGRAMS clean-generic cscope \ - cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ - dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ - distcheck distclean distclean-compile distclean-generic \ - distclean-hdr distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ - install install-am install-cupsbackendPROGRAMS install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ +.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles am--refresh check \ + check-am clean clean-cscope clean-cupsbackendPROGRAMS \ + clean-generic cscope cscopelist-am ctags ctags-am dist \ + dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ + dist-xz dist-zip distcheck distclean distclean-compile \ + distclean-generic distclean-hdr distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am html html-am info \ + info-am install install-am install-cupsbackendPROGRAMS \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-cupsbackendPROGRAMS @@ -1,6 +1,6 @@ -# generated automatically by aclocal 1.15.1 -*- Autoconf -*- +# generated automatically by aclocal 1.16.1 -*- Autoconf -*- -# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -20,7 +20,7 @@ You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) -# Copyright (C) 2002-2017 Free Software Foundation, Inc. +# Copyright (C) 2002-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -32,10 +32,10 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.]) # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.15' +[am__api_version='1.16' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.15.1], [], +m4_if([$1], [1.16.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -51,14 +51,14 @@ m4_define([_AM_AUTOCONF_VERSION], []) # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.15.1])dnl +[AM_AUTOMAKE_VERSION([1.16.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -110,7 +110,7 @@ am_aux_dir=`cd "$ac_aux_dir" && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997-2017 Free Software Foundation, Inc. +# Copyright (C) 1997-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -141,7 +141,7 @@ AC_CONFIG_COMMANDS_PRE( Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999-2017 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -332,13 +332,12 @@ _AM_SUBST_NOTMAKE([am__nodep])dnl # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999-2017 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. - # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], @@ -346,49 +345,41 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + AS_CASE([$CONFIG_FILES], + [*\'*], [eval set x "$CONFIG_FILES"], + [*], [set x $CONFIG_FILES]) shift - for mf + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf do # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line + am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`AS_DIRNAME(["$am_mf"])` + am_filepart=`AS_BASENAME(["$am_mf"])` + AM_RUN_LOG([cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles]) || am_rc=$? done + if test $am_rc -ne 0; then + AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking).]) + fi + AS_UNSET([am_dirpart]) + AS_UNSET([am_filepart]) + AS_UNSET([am_mf]) + AS_UNSET([am_rc]) + rm -f conftest-deps.mk } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS @@ -397,18 +388,17 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each '.P' file that we will -# need in order to bootstrap the dependency handling code. +# This code is only required when automatic dependency tracking is enabled. +# This creates each '.Po' and '.Plo' makefile fragment that we'll need in +# order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) + [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -495,8 +485,8 @@ AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: -# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> -# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> +# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> +# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target (and possibly the TAP driver). The # system "awk" is bad on some platforms. @@ -563,7 +553,7 @@ END Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: <http://www.gnu.org/software/coreutils/>. +that behaves properly: <https://www.gnu.org/software/coreutils/>. If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM @@ -605,7 +595,7 @@ for _am_header in $config_headers :; do done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -626,7 +616,7 @@ if test x"${install_sh+set}" != xset; then fi AC_SUBST([install_sh])]) -# Copyright (C) 2003-2017 Free Software Foundation, Inc. +# Copyright (C) 2003-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -648,7 +638,7 @@ AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering -# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -683,7 +673,7 @@ AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -691,49 +681,42 @@ AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) # AM_MAKE_INCLUDE() # ----------------- -# Check to see how make treats includes. +# Check whether make has an 'include' directive that can support all +# the idioms we need for our automatic dependency tracking code. AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' +[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) +cat > confinc.mk << 'END' am__doit: - @echo this is the am__doit target + @echo this is the am__doit target >confinc.out .PHONY: am__doit END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) + AS_CASE([$?:`cat confinc.out 2>/dev/null`], + ['0:this is the am__doit target'], + [AS_CASE([$s], + [BSD], [am__include='.include' am__quote='"'], + [am__include='include' am__quote=''])]) + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +AC_MSG_RESULT([${_am_result}]) +AC_SUBST([am__include])]) +AC_SUBST([am__quote])]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997-2017 Free Software Foundation, Inc. +# Copyright (C) 1997-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -772,7 +755,7 @@ fi # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -801,7 +784,7 @@ AC_DEFUN([_AM_SET_OPTIONS], AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Copyright (C) 1999-2017 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -848,7 +831,7 @@ AC_LANG_POP([C])]) # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) -# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -867,7 +850,7 @@ AC_DEFUN([AM_RUN_LOG], # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -948,7 +931,7 @@ AC_CONFIG_COMMANDS_PRE( rm -f conftest.file ]) -# Copyright (C) 2009-2017 Free Software Foundation, Inc. +# Copyright (C) 2009-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1008,7 +991,7 @@ AC_SUBST([AM_BACKSLASH])dnl _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) -# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1036,7 +1019,7 @@ fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006-2017 Free Software Foundation, Inc. +# Copyright (C) 2006-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -1055,7 +1038,7 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004-2017 Free Software Foundation, Inc. +# Copyright (C) 2004-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, diff --git a/bjnp-commands.c b/bjnp-commands.c index 3137bfb..fbf0aa8 100644 --- a/bjnp-commands.c +++ b/bjnp-commands.c @@ -37,7 +37,7 @@ bjnp_set_command_header(uint8_t dev_type, uint16_t seq_no, uint16_t session_id, * Set command buffer with command code, session_id and lenght of payload * Returns: sequence number of command */ - strncpy(cmd->header.BJNP_id, BJNP_STRING, sizeof(cmd->header.BJNP_id)); + memcpy(cmd->header.BJNP_id, BJNP_STRING, sizeof(cmd->header.BJNP_id)); cmd->header.dev_type = dev_type; cmd->header.cmd_code = cmd_code; cmd->header.unknown1 = htons(0); @@ -1,9 +1,9 @@ #! /bin/sh # Wrapper for compilers which do not understand '-c -o'. -scriptversion=2016-01-11.22; # UTC +scriptversion=2018-03-07.03; # UTC -# Copyright (C) 1999-2017 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # Written by Tom Tromey <tromey@cygnus.com>. # # This program is free software; you can redistribute it and/or modify @@ -17,7 +17,7 @@ scriptversion=2016-01-11.22; # UTC # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. +# along with this program. If not, see <https://www.gnu.org/licenses/>. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -340,7 +340,7 @@ exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for cups-bjnp 2.0.1. +# Generated by GNU Autoconf 2.69 for cups-bjnp 2.0.2. # # Report bugs to <louis.lagendijk@gmail.com>. # @@ -580,8 +580,8 @@ MAKEFLAGS= # Identity of this package. PACKAGE_NAME='cups-bjnp' PACKAGE_TARNAME='cups-bjnp' -PACKAGE_VERSION='2.0.1' -PACKAGE_STRING='cups-bjnp 2.0.1' +PACKAGE_VERSION='2.0.2' +PACKAGE_STRING='cups-bjnp 2.0.2' PACKAGE_BUGREPORT='louis.lagendijk@gmail.com' PACKAGE_URL='' @@ -644,7 +644,6 @@ am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE -am__quote am__include DEPDIR OBJEXT @@ -718,7 +717,8 @@ PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR -SHELL' +SHELL +am__quote' ac_subst_files='' ac_user_opts=' enable_option_checking @@ -1278,7 +1278,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures cups-bjnp 2.0.1 to adapt to many kinds of systems. +\`configure' configures cups-bjnp 2.0.2 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1344,7 +1344,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of cups-bjnp 2.0.1:";; + short | recursive ) echo "Configuration of cups-bjnp 2.0.2:";; esac cat <<\_ACEOF @@ -1446,7 +1446,7 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -cups-bjnp configure 2.0.1 +cups-bjnp configure 2.0.2 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -1923,7 +1923,7 @@ cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by cups-bjnp $as_me 2.0.1, which was +It was created by cups-bjnp $as_me 2.0.2, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2273,7 +2273,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu -am__api_version='1.15' +am__api_version='1.16' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do @@ -2788,7 +2788,7 @@ fi # Define the identity of the package. PACKAGE='cups-bjnp' - VERSION='2.0.1' + VERSION='2.0.2' cat >>confdefs.h <<_ACEOF @@ -2818,8 +2818,8 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: -# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> -# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> +# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> +# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> mkdir_p='$(MKDIR_P)' # We need awk for the "check" target (and possibly the TAP driver). The @@ -2870,7 +2870,7 @@ END Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: <http://www.gnu.org/software/coreutils/>. +that behaves properly: <https://www.gnu.org/software/coreutils/>. If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM @@ -3735,45 +3735,45 @@ DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" - -am_make=${MAKE-make} -cat > confinc << 'END' +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 +$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; } +cat > confinc.mk << 'END' am__doit: - @echo this is the am__doit target + @echo this is the am__doit target >confinc.out .PHONY: am__doit END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 + (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + case $?:`cat confinc.out 2>/dev/null` in #( + '0:this is the am__doit target') : + case $s in #( + BSD) : + am__include='.include' am__quote='"' ;; #( + *) : + am__include='include' am__quote='' ;; +esac ;; #( + *) : ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf +esac + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 +$as_echo "${_am_result}" >&6; } # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : @@ -5653,7 +5653,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by cups-bjnp $as_me 2.0.1, which was +This file was extended by cups-bjnp $as_me 2.0.2, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -5719,7 +5719,7 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -cups-bjnp config.status 2.0.1 +cups-bjnp config.status 2.0.2 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" @@ -5838,7 +5838,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}" _ACEOF @@ -6450,29 +6450,35 @@ $as_echo "$as_me: executing $ac_file commands" >&6;} # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + case $CONFIG_FILES in #( + *\'*) : + eval set x "$CONFIG_FILES" ;; #( + *) : + set x $CONFIG_FILES ;; #( + *) : + ;; +esac shift - for mf + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf do # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line + am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`$as_dirname -- "$am_mf" || +$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$am_mf" : 'X\(//\)[^/]' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$am_mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -6490,53 +6496,48 @@ $as_echo X"$mf" | q } s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ + am_filepart=`$as_basename -- "$am_mf" || +$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$am_mf" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } - /^X\(\/\/\)$/{ + /^X\/\(\/\/\)$/{ s//\1/ q } - /^X\(\/\).*/{ + /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done + { echo "$as_me:$LINENO: cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles" >&5 + (cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } || am_rc=$? done + if test $am_rc -ne 0; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking). +See \`config.log' for more details" "$LINENO" 5; } + fi + { am_dirpart=; unset am_dirpart;} + { am_filepart=; unset am_filepart;} + { am_mf=; unset am_mf;} + { am_rc=; unset am_rc;} + rm -f conftest-deps.mk } ;; diff --git a/configure.ac b/configure.ac index 5cd0e6d..d1ab1e6 100644 --- a/configure.ac +++ b/configure.ac @@ -1,5 +1,5 @@ dnl Process this file with autoconf to produce a configure script. -AC_INIT([cups-bjnp], [2.0.1], [louis.lagendijk@gmail.com]) +AC_INIT([cups-bjnp], [2.0.2], [louis.lagendijk@gmail.com]) AC_CONFIG_SRCDIR([bjnp.c]) AM_INIT_AUTOMAKE([gnu]) @@ -1,9 +1,9 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2016-01-11.22; # UTC +scriptversion=2018-03-07.03; # UTC -# Copyright (C) 1999-2017 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -16,7 +16,7 @@ scriptversion=2016-01-11.22; # UTC # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. +# along with this program. If not, see <https://www.gnu.org/licenses/>. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -783,7 +783,7 @@ exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2016-01-11.22; # UTC +scriptversion=2018-03-11.20; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -271,15 +271,18 @@ do fi dst=$dst_arg - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. + # If destination is a directory, append the input filename. if test -d "$dst"; then if test "$is_target_a_directory" = never; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst - dst=$dstdir/`basename "$src"` + dstbase=`basename "$src"` + case $dst in + */) dst=$dst$dstbase;; + *) dst=$dst/$dstbase;; + esac dstdir_status=0 else dstdir=`dirname "$dst"` @@ -288,6 +291,11 @@ do fi fi + case $dstdir in + */) dstdirslash=$dstdir;; + *) dstdirslash=$dstdir/;; + esac + obsolete_mkdir_used=false if test $dstdir_status != 0; then @@ -324,34 +332,43 @@ do # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) + # Note that $RANDOM variable is not portable (e.g. dash); Use it + # here however when possible just to lower collision chance. tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 + + # Because "mkdir -p" follows existing symlinks and we likely work + # directly in world-writeable /tmp, make sure that the '$tmpdir' + # directory is successfully created first before we actually test + # 'mkdir -p' feature. if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + $mkdirprog $mkdir_mode "$tmpdir" && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` + test_tmpdir="$tmpdir/a" + ls_ld_tmpdir=`ls -ld "$test_tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi - rmdir "$tmpdir/d" "$tmpdir" + rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null fi trap '' 0;; esac;; @@ -427,8 +444,8 @@ do else # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ + dsttmp=${dstdirslash}_inst.$$_ + rmtmp=${dstdirslash}_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 @@ -493,7 +510,7 @@ do done # Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" @@ -1,9 +1,9 @@ #! /bin/sh # Common wrapper for a few potentially missing GNU programs. -scriptversion=2016-01-11.22; # UTC +scriptversion=2018-03-07.03; # UTC -# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -17,7 +17,7 @@ scriptversion=2016-01-11.22; # UTC # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. +# along with this program. If not, see <https://www.gnu.org/licenses/>. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -101,9 +101,9 @@ else exit $st fi -perl_URL=http://www.perl.org/ -flex_URL=http://flex.sourceforge.net/ -gnu_software_URL=http://www.gnu.org/software +perl_URL=https://www.perl.org/ +flex_URL=https://github.com/westes/flex +gnu_software_URL=https://www.gnu.org/software program_details () { @@ -207,7 +207,7 @@ give_advice "$1" | sed -e '1s/^/WARNING: /' \ exit $st # Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC0" |