Imported Upstream version 1.4.4

1 files changed, 1261 insertions, 0 deletions

diff --git a/CHANGES-1.2.txt b/CHANGES-1.2.txt
new file mode 100644
index 000000000..7b0b1f2de
--- /dev/null
+++ b/CHANGES-1.2.txt
@@ -0,0 +1,1261 @@
+CHANGES-1.2.txt
+---------------
+
+CHANGES IN CUPS V1.2.12
+
+	- The PHP cups_print_file() function crashed if the options
+	  array contained non-string option values (STR #2430)
+	- The image/tiff file matching rule incorrectly identified
+	  some text files as TIFF files (STR #2431)
+	- The filter(7) man page incorrectly documented the
+	  "PAGE: total #-pages" message (STR #2427)
+	- PCL text files were mis-identified as HP-GL/2 and
+	  caused the HP-GL/2 filter to hang (STR #2423)
+	- When printing to a queue with user ACLs, the scheduler
+	  incorrectly returned a quota error instead of a "not
+	  allowed to print" error (STR #2409)
+	- cupsaddsmb could get in a loop if no printer drivers
+	  were installed (STR #2407)
+	- cupsRasterReadHeader() did not byte-swap the header
+	  properly when compiled with certain versions of GCC.
+	- The IPP backend did not send the document-format
+	  attribute for filtered jobs (STR #2411)
+	- Some PPD files could cause a crash in ppdOpen2 (STR
+	  #2408)
+	- The web admin interface incorrectly handled the "share
+	  printers" and "show remote printers" settings (STR
+	  #2393)
+	- The scheduler's log messages about AuthClass and
+	  AuthGroupName advised using a replacement directive but
+	  had the wrong syntax (STR #2400)
+	- Updated the PostScript/PJL and HP-GL/2 MIME rules to
+	  look in the first 4k of the file, not just the first 1k
+	  (STR #2386)
+	- Updated the Italian localization (STR #2382)
+
+
+CHANGES IN CUPS V1.2.11
+
+	- Fixed the "relaying from" log message (STR #2376)
+	- Updated the launchd support on Mac OS X to better
+	  support reconfiguration.
+	- "make distclean" didn't remove all generated files
+	  (STR #2366)
+	- Fixed a bug in the advertisement of classes (STR
+	  #2373)
+	- The IPP backend now stays running until the job is
+	  actually printed by the remote server; previously
+	  it would stop monitoring the job if it was held or
+	  temporarily stopped (STR #2352)
+        - PDF files were not always printed using the correct
+          orientation (STR #2348)
+        - The scheduler could crash if you specified a bad file:
+          URI for a printer (STR #2351)
+        - The Renew-Subscription operation now returns the
+          notify-lease-duration value that was used (STR #2346)
+        - The IPP backend sent job options to IPP printers,
+          however some printers tried to override the options
+          embedded in the PS/PCL stream with those job options
+          (STR #2349)
+	- ppdLocalize() now also tries a country-specific
+	  localization for when localizing to a generic locale
+	  name.
+	- The cupstestppd program now allows for partial
+	  localizations to reduce the size of universal PPD
+	  files.
+	- Chinese PPD files were incorrectly tagged with the
+	  "cn" locale (should have been "zh")
+	- The backends now manage the printer-state-reasons
+	  attribute more accurately (STR #2345)
+	- Java, PHP, Perl, and Python scripts did not work
+	  properly (STR #2342)
+	- The scheduler would take forever to start if the
+	  maximum number of file descriptors was set to
+	  "unlimited" (STR #2329)
+	- The page-ranges option was incorrectly applied to the
+	  banner pages (STR #2336)
+	- Fixed some GCC compile warnings (STR #2340)
+	- The DBUS notification code was broken for older
+	  versions of DBUS (STR #2327)
+	- The IPv6 code did not compile on HP-UX 11.23 (STR
+	  #2331)
+	- PPD constraints did not work properly with custom
+	  options.
+	- Regular PPD options with the name "CustomFoo" did
+	  not work.
+	- The USB backend did not work on NetBSD (STR #2324)
+	- The printer-state-reasons attribute was incorrectly
+	  cleared after a job completed (STR #2323)
+	- The scheduler did not set the printer operation policy
+	  on startup, only on soft reload (STR #2319)
+	- The AP_FIRSTPAGE_InputSlot option did not clear any
+	  ManualFeed setting that was made, which caused problems
+	  with some PPD files (STR #2318)
+	- cupsDoFileRequest() and cupsDoRequest() did not abort
+	  when getting an error in the response (STR #2315)
+	- The scheduler did not schedule jobs properly to remote
+	  or nested classes (STR #2317)
+	- Updated the mime.types and mime.convs headers to warn
+	  that the files are overwritten when CUPS is installed.
+	  Local changes should go in local.types or local.convs,
+	  respectively (STR #2310)
+	- The scheduler could get in an infinite loop if a
+	  printer in an implicit class disappeared (STR #2311)
+	- The pstops filter did not handle %%EndFeature comments
+	  properly (STR #2306)
+	- Fixed a problem with the Polish web page printer icons
+	  (STR #2305)
+	- ppdLocalize() now also localizes the cupsICCProfile
+	  attributes.
+	- The scheduler still had a reference to the incorrect
+	  "notify-recipient" attribute (STR #2307)
+	- The "make check" and "make test" subscription tests did
+	  not set the locale (STR #2307)
+	- The "make check" and "make test" subscription tests
+	  incorrectly used the notify-recipient attribute instead
+	  of notify-recipient-uri (STR #2307)
+	- cupsRasterInterpretPPD() incorrectly limited the
+	  cupsBorderlessScalingFactor when specified in the
+	  job options.
+
+
+CHANGES IN CUPS V1.2.10
+
+	- ppdLocalize() now supports localizing for Japanese
+	  using the "jp" locale name used by the ppdmerge
+	  program from the CUPS DDK 1.1.0 (STR #2301)
+	- _cupsAdminSetServerSettings() did not support changing
+	  of top-level directives as designed.
+	- The init script path check was broken.
+	- CUPS incorrectly used the attribute "notify-recipient"
+	  instead of "notify-recicpient-uri" in several places
+	  (STR #2297)
+	- Fixed a configure script bug on MirBSD (STR #2294)
+	- The pdftops filter did not limit the amount of recursion
+	  of page sets (STR #2293)
+	- Custom page sizes with fractional point sizes did not
+	  work (STR #2296)
+	- The lpoptions command would crash when adding or removing
+	  options on a system with no printers (STR #2295)
+
+
+CHANGES IN CUPS V1.2.9
+
+	- The scheduler did not use the default job-sheets
+	  (banners) for implicit classes (STR #2284)
+	- The scheduler could crash when listing complete jobs
+	  that had been unloaded from memory (STR #2288)
+	- The French localization was doubled up (STR #2287)
+	- Build system fixes for several platforms (STR #2260,
+	  STR #2275)
+	- The scheduler's openssl certificate generation code was
+	  broken on some platforms (STR #2282)
+	- The scheduler's log rotation check for devices was
+	  broken (STR #2278)
+	- The LPD mini-daemon did not handle the document-format
+	  option correctly (STR #2266)
+	- The pdftops filter ignored the "match" size option in the
+	  pdftops.conf file (STR #2285)
+	- cupstestppd now validates UTF-8 text strings in
+	  globalized PPD files (STR #2283)
+	- The outputorder=reverse option did not work with all
+	  printers (STR #2279)
+	- Classes containing other classes did not always work
+	  (STR #2255)
+	- Printer location and description information was lost
+	  if the corresponding string contained the "#" character
+	  (STR #2254)
+	- cupsRemoveOption() did not work properly (STR #2264)
+	- The USB backend did not work with some USB to parallel
+	  cables on Mac OS X.
+	- The test page did not print the rulers properly on
+	  large media sizes (STR #2252)
+	- The text filter could crash when pretty printing certain
+	  types of files (STR #2158)
+
+
+CHANGES IN CUPS V1.2.8
+
+	- Documentation fixes (STR #2141, STR #2157)
+	- The HTTP upgrade redirection used by the scheduler did
+	  not work with Internet Explorer (STR #2235)
+	- Members of a class with Unicode names did not appear
+	  correctly in the web interface (STR #2154)
+	- Changing the "Save debugging information" setting in
+	  the web interface no longer affects the other server
+	  settings (STR #1993)
+	- The scheduler did not choose SSL certificates correctly
+	  on Mac OS X (STR #2225)
+	- The scheduler could get in an infinite loop when
+	  printing to a remote class (STR #2228)
+	- The jobs web page did not have separating space after
+	  the number of pages column (STR #2230)
+	- Added French localization (STR #2221)
+	- Updated Spanish localization (STR #2223)
+	- Updated Japanese localization (STR #2216)
+	- cupsBorderlessScalingFacter was limited to a range of
+	  0.9 to 1.1, but some printers need larger values (STR
+	  #2222)
+	- Landscape printing of PDF files did not always work
+	  (STR #2149)
+	- Fixed slow USB printing on Minolta printers (STR #2104,
+	  STR #2219)
+	- The ZPL label printer driver could produce stretched
+	  output (PR #6448)
+	- The IPP backend now clears the printer-state-message
+	  when there are no outstanding errors or warnings (STR
+	  #2126)
+	- The CUPS Java scripting support did not work with
+	  recent versions of Java due to the use of Sun's private
+	  Base64 class (STR #2152)
+	- The scheduler did not pass HTTP GET form variables to
+	  custom CGI programs (STR #2173)
+	- The lpoptions command now displays the reason why a PPD
+	  file cannot be found (STR #2184)
+	- The scheduler did not accept "none" as a browse
+	  protocol name (STR #2200)
+	- The scheduler still loaded the remote printer cache,
+	  even when browsing was disabled (STR #2198)
+	- The SNMP backend now shows OfficeJet printers with the
+	  "HP" manufacturer prefix (STR #2151)
+	- Web interface HTML cleanup (STR #2153)
+	- The parallel backend consumed 100% CPU on FreeBSD due
+	  to an apparently common parallel port driver bug (STR
+	  #2161)
+	- ippReadIO() incorrectly returned IPP_IDLE when the
+	  initial IPP message header could not be read (STR
+	  #2179)
+	- cupsRasterInterpretPPD() did not support custom options
+	  (STR #1960)
+	- Collated output produced by the PostScript filter could
+	  lose some options (STR #2137)
+	- job-hold-until with time values for the next day would
+	  be held for 60 days (STR #2144)
+	- Some types of Sun raster files did not print correctly
+	  (STR #2107)
+	- Raw PBM files did not print correctly (STR #2106)
+	- The SNMP backend no longer uses IPP with HP printers,
+	  as some recent firmware versions appear to not work
+	  (STR #2055)
+	- cupsMarkOptions() did not handle the
+	  multiple-document-handling option (STR #2135)
+	- lpstat did not show the local job ID of active printers
+	  (STR #2125)
+	- The backends incorrectly used STATUS:
+	  media-tray-empty-error messages for out-of-paper
+	  conditions (STR #2123, STR #2124)
+	- cupsGetPPD2() returned the wrong error when the PPD
+	  file did not exist (STR #2122)
+	- cupsDoAuthentication() did not translate the password
+	  prompt (STR #2121)
+	- httpGetLength2() did not handle error messages without
+	  content correctly (STR #2133)
+	- Added support for 32/64-bit libraries on HP-UX Itanium
+	  systems (STR #2115)
+	- Fixed a configure script problem with the 32/64-bit
+	  library support (STR #2114)
+	- The PostScript filter did not properly output document
+	  setup commands for reversed output (STR #2111)
+	- The scheduler did not parse IPv6 netmasks properly (STR
+	  #2117)
+
+
+CHANGES IN CUPS V1.2.7
+
+	- Documentation updates (STR #2089)
+	- Added an Italian translation (STR #2105)
+	- The PostScript filter now rotates the bounding box
+	  values as needed (STR #2079)
+	- The scheduler no longer loads the remote printer cache
+	  when browsing is disabled (STR #2084)
+	- The scheduler no longer writes a new launchd
+	  configuration file if it doesn't have to (STR #2083)
+	- Updated the USB and PAP backends for Mac OS X (STR
+	  #2086)
+	- The scheduler now picks up on changes to IPv6 and DNS
+	  configuration on Mac OS X (STR #2085)
+	- The lpstat program could still hang (STR #2098)
+	- Fixed an inefficiency in the SNMP IPP detection code
+	  (STR #2100)
+	- The SSL negotiation code did not implement short
+	  timeouts (STR #2091)
+
+
+CHANGES IN CUPS V1.2.6
+
+	- The web interface was not localized on Mac OS X (STR
+	  #2075)
+	- "lpc status" did not show the number of queued jobs for
+	  disabled queues (STR #2069)
+	- The lpstat program could hang (STR #2073)
+	- The serial backend did not support the new USB serial
+	  filenames on Linux (STR #2061)
+	- The parallel backend did not support bidirectional I/O
+	  properly (STR #2056)
+	- The network backends now log the numeric address that
+	  is being used (STR #2046)
+	- Fixed a compile error when using libpaper.
+	- Fixed a compile error when compiling on Solaris with
+	  threading enabled (STR #2049, STR #2050)
+	- Missing printer-state-changed event for
+	  printer-state-message updates (STR #2047)
+
+
+CHANGES IN CUPS V1.2.5
+
+	- Documentation updates (STR #2038)
+	- The SNMP backend no longer uses IPP for Epson printers
+	  (STR #2028)
+	- Updated the configure script for Tru64 UNIX 5.1 (STR
+	  #2033)
+	- Tru64 5.1B's getaddrinfo() and getnameinfo() functions
+	  leak file descriptors (STR #2034)
+	- cupsAddDest() didn't add the parent destination's
+	  options and attributes.
+	- ppdConflicts() did not handle custom option
+	  constraints.
+	- Raw printing of gzip'd files did not work (STR #2009)
+	- The scheduler no longer preserves default option
+	  choices when the new PPD no longer provides the old
+	  default choice (STR #1929)
+	- The Linux SCSI backend is now only built if the SCSI
+	  development headers are installed.
+	- USB printing to Minolta printers did not work (STR
+	  #2019)
+	- Windows clients could not monitor the queue status (STR
+	  #2006)
+	- The scheduler didn't log the operation name in the
+	  access_log file for Create-Job and Print-Job requests.
+	- The PostScript filter now separates collated copies
+	  with any required JCL commands so that JCL-based
+	  finishing options act on the individual copies and not
+	  all of the copies as a single document.
+	- The PostScript filter now disables duplex printing when
+	  printing a 1-page document.
+	- cups-lpd didn't pass the correct
+	  job-originating-host-name value (STR #2023)
+	- Fixed some speling errors in the German message catalog
+	  (STR #2012)
+	- cupstestppd did not catch PPD files with bad
+	  UIConstraints values (STR #2016)
+	- The USB backend did not work with the current udev-
+	  created printers if the first printer was disconnected
+	  (STR #2017)
+	- Mirrored and rotated printing did not work with some
+	  documents (STR #2004)
+	- 2-sided printing with banners did not work properly on
+	  some printers (STR #2018)
+	- Updated the raw type rule to handle PJL within the
+	  first 4k of a print job (STR #1969)
+	- Added an Estonian translation (STR #1957)
+	- Clarified the documentation for the cupsd.conf @LOCAL
+	  and @IF(name) allow/deny functionality (STR #1992)
+	- The PostScript filters did not escape the Title and For
+	  comments in the print job header (STR #1988)
+	- The scheduler would use 100% CPU if browsing was
+	  disabled and the cupsd.conf file contained BrowsePoll
+	  lines (STR #1994)
+	- The cupsDirRead() function did not work properly on
+	  non-POSIX-compliant systems (STR #2001)
+	- The cupsFile functions didn't handle read/write errors
+	  properly (STR #1996)
+	- The DBUS support now works with older versions of the
+	  DBUS library.
+
+
+CHANGES IN CUPS V1.2.4
+
+	- The --with-printcap configure option did not work (STR
+	  #1984)
+	- The character set reported by cupsLangGet() did not
+	  always reflect the default character set of a given
+	  locale (STR #1983)
+	- Older Lexmark and Tektronix printers did not work with
+	  IPP (STR #1980)
+	- Failsafe printing did not work (PR #6328)
+	- Some web interface redirects did not work (STR #1978)
+	- The web interface change settings button could
+	  introduce a "Port 0" line in cupsd.conf if there was no
+	  loopback connection available (STR #1979)
+	- The web interface change settings and edit
+	  configuration file buttons would truncate the
+	  cupsd.conf file (STR #1976)
+	- The German web interface used the wrong printer icon
+	  images (STR #1973)
+	- The "All Documents" link in the on-line help was
+	  missing a trailing slash (STR #1971)
+	- The Polish web interface translation used the wrong
+	  URLs for the job history (STR #1963)
+	- The "reprint job" button did not work (STR #1956)
+	- The scheduler did not always report printer or job
+	  events properly (STR #1955)
+	- The scheduler always stopped the queue on error,
+	  regardless of the exit code, if the error policy was
+	  set to "stop-printer" (STR #1959)
+	- ppdEmitJCL() included UTF-8 characters in the JCL job
+	  name, which caused problems on some printers (STR
+	  #1959)
+	- Fixed a buffering problem that cause high CPU usage
+	  (STR #1968)
+	- The command-line applications did not convert
+	  command-line strings to UTF-8 as needed (STR #1958)
+	- cupsDirRead() incorrectly aborted when reading a
+	  symbolic link that pointed to a file/directory that did
+	  not exist (STR #1953)
+	- The cupsInterpretRasterPPD() function did not handle
+	  custom page sizes properly.
+
+
+CHANGES IN CUPS V1.2.3
+
+	- The scheduler did not send job-state or
+	  job-config-changed events when a job was held,
+	  released, or changed (STR #1947)
+	- The scheduler now aborts if the configuration file and
+	  directory checks fail (STR #1941)
+	- Fixed a problem with ippPort() not using the port
+	  number that was set via the client.conf file or
+	  CUPS_SERVER environment variable (STR #1945)
+	- HTTP headers were not buffered (STR #1899)
+	- Some IPP printers (HP) did not like UTF-8 job names
+	  (STR #1837)
+	- The CUPS desktop icon is now localized for Polish (STR
+	  #1920)
+	- Printer options were not always honored when printing
+	  from Windows clients (STR #1839)
+	- The openssl command would lock up the scheduler when
+	  generating an encryption certificate on some platforms
+	  due to a lack of entropy for the random number
+	  generator (STR #1876)
+	- The web admin page did not recognize that "Listen 631"
+	  enabled remote access (STR #1908)
+	- The web admin page did not check whether changes were
+	  made to the Basic Server Settings check boxes (STR
+	  #1908)
+	- The IPP backend could generate N*N copies in certain
+	  edge cases.
+	- The scheduler did not restore remote printers properly
+	  when BrowseShortNames was enabled (STR #1893)
+	- Polling did not handle changes to the network
+	  environment on Mac OS X (STR #1896)
+	- The "make test" subscription tests used invalid
+	  notify-recipient-uri values (STR #1910)
+	- Printers could be left in an undefined state on system
+	  sleep (STR #1905)
+	- The Berkeley and System V commands did not always use
+	  the expected character set (STR #1915)
+	- Remote printing fixes (STR #1881)
+	- The cupstestppd utility did not validate translation
+	  strings for custom options properly.
+	- Multi-language PPD files were not properly localized in
+	  the web interface (STR #1913)
+	- The admin page's simple settings options did not check
+	  for local domain socket or IPv6 addresses and did not
+	  use "localhost" as the listen address.
+	- An empty BrowseProtocols, BrowseLocalProtocols, or
+	  BrowseRemoteProtocols line would crash the scheduler
+	  instead of disabling the corresponding browsing options.
+	- The scheduler now logs IPP operation status as debug
+	  messages instead of info or error.
+	- cupsFileRewind() didn't clear the end-of-file state.
+	- cupstestppd didn't report the actual misspelling of the
+	  1284DeviceID attribute (STR #1849) 
+	- BrowseRelay didn't work on Debian (STR #1887)
+	- configure --without-languages didn't work (STR #1879)
+	- Manually added remote printers did not work (STR #1881)
+	- The <cups/backend.h> header was not installed.
+	- Updated the build files for Autoconf 2.60 (STR #1853)
+	- The scheduler incorrectly terminated the polling
+	  processes after receiving a partial log line.
+	- The cups-lpd mini-daemon reported "No printer-state
+	  attribute found" errors when reporting the queue status
+	  (PR #6250, STR #1821)
+	- SNMP backend improvements (STR #1737, STR #1742, STR
+	  #1790, STR #1835, STR #1880)
+	- The scheduler erroneously reported an error with the
+	  CGI pipe (STR #1860)
+	- Fixed HP-UX compile problems (STR #1858, STR #1859)
+	- cupstestppd crashed with some PPD files (STR #1864)
+	- The <cups/dir.h> and <cups/file.h> header files did not
+	  work with C++.
+
+
+CHANGES IN CUPS V1.2.2
+
+	- Documentation updates (STR #1765, STR #1780)
+	- CUPS didn't know about alternate character set names
+	  for Asian text (STR #1819)
+	- The lpoptions -o and -r options did not work unless you
+	  specified a printer.
+	- The lpoptions command incorrectly allowed users to set
+	  printer attributes like printer-type (STR #1791)
+	- httpWait() did not flush the write buffer, causing "bad
+	  request" errors when communicating with CUPS 1.1.x
+	  servers (STR #1717)
+	- Polling did not sanitize the printer description,
+	  location, or make and model strings like broadcasts
+	  did.
+	- Polled printers did not show the server's default
+	  job-sheets option value.
+	- The Samba password prompt was not properly localized
+	  (STR #1814)
+	- Added a German translation (STR #1842)
+	- The scheduler now creates self-signed SSL certficates
+	  automatically when using OpenSSL and CDSA for
+	  encryption, just as for GNU TLS.
+	- The SNMP backend sporatically reported some printers as
+	  "unknown" (STR #1774)
+	- The scheduler now forces BrowseTimeout to be at least
+	  twice the BrowseInterval value and non-zero to avoid
+	  common configuration errors.
+	- The scheduler incorrectly returned printer URIs of the
+	  form "ipp://server/printers/classname" for classes (STR
+	  #1813)
+	- Updated Japanese localization (STR #1805)
+	- The scheduler's SSL certificate/key directory was not
+	  created on installation (STR #1788)
+	- Added a mailto.conf man page and help page (STR #1754)
+	- The parallel and USB backends no longer wait for the
+	  printer to go on-line - this caused problems with
+	  certain printers that don't follow with the IEEE-1284
+	  standard (STR #1738)
+	- The scheduler could crash on a reload when implicit
+	  classes were present (STR #1828)
+	- The IPP backend incorrectly used the CUPS_ENCRYPTION
+	  environment variable to determine the default
+	  encryption mode when printing (STR #1820)
+	- USB printing did not work on Solaris (STR #1756)
+	- The scheduler sorted job priorities in the wrong order
+	  (STR #1811)
+	- The scheduler did not automatically restart notifiers
+	  that exited or crashed (STR #1793)
+	- IPv6 support did not work on NetBSD (STR #1834)
+	- The EPM packaging file did not work (STR #1804)
+	- The scheduler used up the CPU if BrowseRemoteProtocols
+	  was empty (STR #1792)
+	- Custom page sizes did not work (STR #1787)
+	- The SNMP backend could crash on some systems when SNMP
+	  logging was enabled (STR #1789)
+	- Browsing could produce some funny printer names when
+	  ServerName was set to an IP address (STR #1799)
+	- Fixed the log message for BrowseRelay (STR #1798)
+	- Fixes to allow CUPS to compile on MirBSD (STR #1796)
+	- The scheduler incorrectly set the FINAL_CONTENT_TYPE
+	  environment variable (STR #1795)
+	- The pdftops filter incorrectly embedded a "produced by"
+	  comment, causing PDF printing not to work on some
+	  operating systems (STR #1801)
+	- Sending raw jobs from a client system could cause the
+	  client's scheduler to eventually crash (STR #1786)
+	- The scheduler now checks that the notifier exists prior
+	  to accepting a new subscription request.
+	- The scheduler now reports the supported
+	  notify-recipient schemes based on the contents of the
+	  ServerBin/notifier directory.
+	- Event notifications did not include the
+	  notify-sequence-number or other required attributes
+	  (STR #1747)
+	- Allow/Deny addresses of the form "11.22.33.*" did not
+	  work on Linux (STR #1769)
+	- cupsGetPPD() did not work if the scheduler was only
+	  listening on a domain socket (STR #1766)
+	- The scheduler could crash advertising a class (STR
+	  #1768)
+	- The scheduler could crash if the default printer was
+	  deleted (STR #1776)
+	- Added a new default CUPS raster format (v3) which does
+	  not compress the raster stream in order to provide the
+	  same cupsRasterReadPixels() and cupsRasterWritePixels()
+	  performance as CUPS 1.1.x.
+	- The cupsaddsmb man page listed the wrong files for the
+	  CUPS driver.
+	- Some configure --with options did not work (STR #1746)
+	- "Allow @IF(name)" didn't work if "name" wasn't the
+	  first network interface (STR #1758)
+	- The lpstat command did not use the correct character
+	  set when reporting the date and time (STR #1751)
+	- The cupsaddsmb command and web interface did not update
+	  the Windows PPD files properly, resulting in corrupt
+	  PPD files for the Windows client to use (STR #1750)
+	- The cupsd.conf man page didn't describe the Listen
+	  domain socket syntax (STR #1753)
+	- The scheduler no longer tries to support more than
+	  FD_SETSIZE file descriptors.
+	- CDSA (encryption) support fixes for MacOS X.
+	- The lppasswd program needs to be setuid to root to
+	  create and update the /etc/cups/passwd.md5 file (STR
+	  #1735)
+	- 32/64-bit library installation was broken (STR #1741)
+	- The USB backend now reports a "no such device" error
+	  when using the old filename-based USB URIs instead of
+	  the "success" error.
+	- Increased the HTTP and IPP read timeouts to 10 seconds,
+	  as 1 second was too short on congested networks (STR
+	  #1719)
+	- The SNMP backend now uses the device description over
+	  the printer-make-and-model attribute when the attribute
+	  contains a generic name (STR #1728)
+	- Fixed another file descriptor leak when printing raw
+	  files (STR #1736)
+	- Raw queues were not shared via LDAP (STR #1739)
+	- The pstops filter didn't always embed PageSetup
+	  commands from the PPD file (STR #1740)
+	- "make install" didn't work if you disabled all of the
+	  localizations.
+	- The scheduler didn't always choose the least costly
+	  filter.
+	- Fixed parsing of IPv6 addresses in Allow, Deny,
+	  BrowseAllow, BrowseDeny, and BrowseRelay directives
+	  (STR #1713)
+	- Printers that were shared via LDAP did not get added to
+	  the LDAP server properly (STR #1733)
+	- LDAP browsing would crash the scheduler if a required
+	  value was missing (STR #1731)
+	- Special cases for the "localhost" hostname did not
+	  work, causing printing to not work when the /etc/hosts
+	  file did not contain a localhost entry (STR #1723)
+	- Updated the Spanish translation (STR #1720, STR #1770)
+	- Reverse-order page output was broken when N-up or
+	  landscape orientations were used (STR #1725)
+	- The parallel, serial, socket, and USB backends needed
+	  print data before they would report back-channel data,
+	  causing problems with several new drivers (STR #1724)
+
+
+CHANGES IN CUPS V1.2.1
+
+	- "lprm -h hostname" did not work (STR #1800)
+	- The web interface did not handle reloads properly for
+	  MSIE (STR #1716)
+	- The configure script no longer adds linker rpath
+	  options when they are unnecessary.
+	- The scheduler could crash printing a debug message on
+	  Solaris (STR #1714)
+	- The --enable-32bit and --enable-64bit configure options
+	  did not always work.
+	- The password prompt showed the domain socket address
+	  instead of "localhost" for local authentication (STR
+	  #1706)
+	- The web interface filtered the list of printers even if
+	  the user wasn't logged in (STR #1700)
+	- The IPP backend did not work reliably with some Xerox
+	  printers (STR #1704)
+	- Trailing banners were not added when printing a single
+	  file (STR #1698)
+	- The web interface support programs crashed on Solaris
+	  (STR #1699)
+	- cupstestppd incorrectly reported problems with
+	  *1284DeviceID attributes (STR #1710)
+	- Browsing could get disabled after a restart (STR #1670)
+	- Custom page sizes were not parsed properly (STR #1709)
+	- The -U option wasn't supported by lpadmin (STR #1702)
+	- The -u option didn't work with lpadmin (STR #1703)
+	- The scheduler did not create non-blocking back-channel
+	  pipes, which caused problems when the printer driver
+	  did not read the back-channel data (STR #1705)
+	- The scheduler no longer uses chunking in responses to
+	  clients - this caused problems with older versions of
+	  CUPS like 1.1.17 (PR #6143)
+	- Automatic raw printing was broken (STR #1667)
+	- 6-up printing was broken (STR #1697)
+	- The pstops filter did not disable CTRL-D processing on
+	  the printer/RIP.
+	- ppdOpen*() did not load custom options properly (STR
+	  #1680)
+	- "Set Printer Options" in the web interface did not
+	  update the DefaultImageableArea or
+	  DefaultPaperDimension attributes in the PPD file (STR
+	  #1689)
+	- Fixed compile errors (STR #1682, STR #1684, STR #1685,
+	  STR #1690)
+	- The lpstat command displayed the wrong error message
+	  for a missing destination (STR #1683)
+	- Revised and completed the Polish translation (STR
+	  #1669)
+	- Stopped jobs did not show up in the list of active jobs
+	  (STR #1676)
+	- The configure script did not use the GNU TLS
+	  "libgnutls-config" script to find the proper compiler
+	  and linker options.
+	- The imagetoraster filter did not correctly generate
+	  several 1, 2, and 4-bit color modes.
+	- cupsRasterWritePixels() could lose track of the current
+	  output row.
+	- cupsRasterReadPixels() did not automatically swap
+	  12/16-bit chunked pixel data.
+	- Moved the private _cups_raster_s structure out of the
+	  public header.
+	- Updated the CUPS raster format specification to include
+	  encoding rules and colorspace definitions.
+	- The Zebra PPD files had the wrong PostScript code for
+	  the "default" option choices.
+	- The imagetoraster filter did not generate correct CIE
+	  XYZ or Lab color data.
+	- The cups-config script did not work when invoked from a
+	  source directory (STR #1673)
+	- The SNMP backend did not compile on systems that used
+	  the getifaddrs emulation functions (STR #1668)
+
+
+CHANGES IN CUPS V1.2.0
+
+	- Documentation updates (STR #1618, STR #1620, STR #1622,
+	  STR #1637)
+	- Static file copy buffers reduced from 64k to 32k to
+	  work around bogus MallocDebug library assumptions (STR
+	  #1660)
+	- The scheduler did not decode the backend exit code
+	  properly (STR #1648)
+	- The MacOS X USB backend did not report the 1284 device ID,
+	  nor did it fix device IDs returned by HP printers.
+	- The scheduler started more slowly than 1.1.x with large
+	  numbers of printers (STR #1653)
+	- cupsRasterInterpretPPD() didn't support the
+	  cupsPreferredBitsPerColor attribute, and imagetoraster
+	  didn't use the new API.
+	- The "make test" script did not create all of the necessary
+	  subdirectories for testing (STR #1638)
+	- The scheduler did not prevent rotation of logs
+	  redirected to /dev/null (STR #1651)
+	- "make test" did not include the SNMP backend in the
+	  test environment (STR #1625)
+	- The EPM packaging files did not work (STR #1621)
+	- "Use Default Configuration" inserted a broken
+	  configuration file (STR #1624)
+	- Redirects in the web interface did not always preserve
+	  the encrypted status of a connection (STR #1603)
+	- Added the Apple "pap" backend.
+	- Added CUPS library to CUPS Image shared library
+	  linkage to support Linux --as-needed linker option
+	  (STR #1606)
+	- Fixed support for --enable-pie (STR #1609)
+	- The pdftops filter did not validate the length of the
+	  encryption key (STR #1608)
+	- Updated the Polish localization.
+	- "Encryption Required" in the cupsd.conf file now only
+	  requires encryption when the connection is not over the
+	  loopback interface or domain socket.
+	- Printer names containing "+" were not quoted properly in
+	  the web interface (STR #1600)
+	- The SNMP backend now reports the make and model in the
+	  information string so that the auto-generated printer
+	  name is more useful than just an IP address.
+
+
+CHANGES IN CUPS V1.2rc3
+
+	- The cups-lpd program always did reverse lookups on the
+	  client address, which could be a performance problem.
+	  Added a "-n" option to disable lookups.
+	- When configured with SSL support, require encryption by
+	  default when displaying the /admin location (STR #1592)
+	- The next job ID was not computed correctly if the job
+	  cache file got out of sync with the spool directory
+	  (STR #1582)
+	- The PNG image handling code used deprecated functions
+	  from libpng (STR #1587)
+	- Added a Polish translation (STR #1584, STR #1586)
+	- More changes to the scheduler to improve battery life
+	  on portable devices (STR #1583)
+	- Changed the default log level for status messages back
+	  to "DEBUG" to be consistent with CUPS 1.1.x (STR #1579)
+	- The error string was not set properly when
+	  cupsDoFileRequest() was given the name of a directory
+	  (STR #1578)
+	- Fixed handling of job-hold-until (STR #1581)
+	- Added explicit notes to the cupsaddsmb man page
+	  explaining that the driver filenames are case-sensitive
+	  under UNIX and that they must be all lowercase (Windows
+	  2000) or all UPPERCASE (Windows 95/98/Me) to work (STR
+	  #1568)
+	- The USB backend incorrectly split the manufacturer name
+	  if it contained spaces (STR #1566)
+	- The scheduler would hang when listing PPD files for a
+	  manufacturer whose name contained spaces (STR #1567)
+	- Added the SNMP backend for network printer discovery
+	  (STR #1555)
+	- cupstestppd now fails PPD files with 1284DeviceId
+	  instead of 1284DeviceID, and cups-driverd uses a
+	  case-insensitive comparison when looking for it (STR
+	  #1573)
+	- cupsDoFileRequest() and cupsDoRequest() now work
+	  properly with non-blocking HTTP connections.
+	- Added Swedish translation (STR #1569)
+	- "make install" now installs the MIME files with world
+	  read permissions (STR #1565)
+	- More CDSA encryption support fixes (STR #1563)
+	- Updated the default mime.types file to support printing
+	  of files that do not have a locally-recognized MIME
+	  media type to raw or System V queues.
+	- Updated the serial port detection code on Linux (STR
+	  #1562)
+	- Added some more error checking to httpGetHostname()
+	  (STR #1561)
+	- The title of some administration pages was not
+	  localized (STR #1548)
+	- The edit-config.tmpl file was not generated or
+	  installed for the Spanish or Japanese localizations
+	  (STR #1547)
+	- The mimeDelete() function freed the types before the
+	  filters, but the filters needed the type data (STR #1558)
+	- The scheduler didn't keep track of the status pipes
+	  properly, leading to a bad select() for multi-file jobs
+	  (STR #1559)
+	- The cupstestdsc program didn't validate the ordinal
+	  page number value for %%Page: comments.
+
+
+CHANGES IN CUPS V1.2rc2
+
+	- The scheduler was not always using the string pool,
+	  causing random crashes.
+	- The lpmove and the web interface's Move Job button did
+	  not work with stopped jobs (STR #1534)
+	- The PostScript filter did not handle the page-set
+	  option properly with number-up printing (STR #1543)
+	- The scheduler now only warns about unsupported ACLs
+	  once (STR #1532)
+	- The "fitplot" option did not work with output from
+	  Mozilla (STR #1542)
+	- The imagetops filter did not work with Level 2 or 3
+	  printers (STR #1533)
+	- The scheduler now recognizes PostScript files with PJL
+	  commands that do not include an ENTER LANGUAGE command.
+	- Added --with-printcap configure option.
+	- 64-bit SSL fixes for MacOS X.
+	- The scheduler didn't send some printer state change
+	  events.
+	- The scheduler didn't send jobs to busy remote printers.
+	- Fixed some problems with the launchd support.
+	- Added new USB printer backend for MacOS X.
+	- The PostScript filter now handles files that start with
+	  an incomplete PJL header (PR #6076)
+	- The web interface language selection code did not try
+	  the generic language localization (STR #1531)
+	- The language cache, string pool, and transcoding caches
+	  are now process global instead of per-thread to avoid
+	  problems with GNOME and to allow for data sharing
+	  between threads (STR #1530)
+	- Fixed a CUPS 1.1.x compatibility bug (STR #1528)
+	- The web interface redirection after certain printer
+	  administration tasks was broken (STR #1516)
+	- Web interface authorization could get stuck (STR #1512)
+	- Localization updates (STR #1513, STR #1518, STR #1520)
+	- The pstops filter didn't work with some files (STR
+	  #1523)
+	- "./configure --enable-static" didn't work (STR #1522)
+	- The scheduler was not using the configured default
+	  Group (STR #1521)
+	- The web interface still did not show the localized time
+	  and date for some locales and systems (STR #1509)
+	- httpAddrGetList() would crash on systems without
+	  getaddrinfo().
+	- Socket URIs without a trailing slash would cause the
+	  port number to not be accepted (STR #1519)
+	- Local raw and System V printers were not advertised as
+	  such for printer browsing (STR #1502)
+	- The RPM spec file incorrectly put duplicate copies of
+	  the Japanese and Spanish web interface templates in the
+	  main cups package (STR #1517)
+	- cupsSetDests() did not explicitly set the permissions
+	  of the /etc/cups/lpoptions file (STR #1508)
+	- The lpq command crashed with the -h option (STR #1515)
+
+
+CHANGES IN CUPS V1.2rc1
+
+	- Documentation updates (STR #1497, STR #1498)
+	- The scheduler now redirects browsers to https: URLs
+	  when encryption is required.
+	- The scheduler would crash when printing with a banner
+	  (STR #1500)
+	- cups-driverd did not use the LanguageEncoding attribute
+	  in PPD files to convert the NickName to UTF-8 (STR
+	  #1503)
+	- The lpadmin command could not set the
+	  printer-error-policy attribute (STR #1504)
+	- The web interface did not show the time and date in the
+	  correct format for the locale (STR #1505)
+	- CUPS no longer accepts print jobs if a printer does not
+	  support the file format (STR #1501)
+	- Cleaned up the PostScript filter (pstops) so that it
+	  properly supports %%IncludeFeature and page scaling
+	  (STR #1453)
+	- Fixed the cupsFileRewind() and cupsFileSeek() functions
+	  to work properly with uncompressed files.
+	- Added cupsFileGetLine(), cupsFileStderr(),
+	  cupsFileStdin(), and cupsFileStdout() functions to the
+	  CUPS library.
+	- Added a new cupstestdsc program to test the DSC
+	  conformance of PostScript files.
+	- Added KDE/GNOME icons and a Manage Printers menu item.
+	- Added --enable-image and --enable-pdftops configure
+	  options to control whether the image and PDF filters
+	  are built and installed (default = yes for all
+	  platforms but MacOS X)
+	- Fixed a minor memory leak in the PPD API.
+	- Fixed transcoding issues (STR #1493)
+	- The scheduler now enforces a minimum job cost of 100
+	  when doing FilterLimit checks.
+	- The scheduler would leak file descriptors when printing
+	  to raw queues (STR #1491)
+	- The IPv6 support did not compile on Tru64 UNIX (STR
+	  #1488)
+	- ppdOpen2() now converts the NickName and all UI text to
+	  UTF-8 (STR #1475)
+	- The Set Allowed Users web page did not work (STR #1486)
+	- When the default policy was not set or set to a non-
+	  existing policy, the scheduler did not set the default
+	  policy name to "default" (STR #1484)
+	- The Zebra CPCL driver did not use the correct righthand
+	  margin for the 4" wide label sizes.
+	- Fixed a problem with the parsing of fractional real
+	  numbers in PPD files.
+	- Added Spanish localization files (STR #1480)
+	- Fixed localization of a few scheduler messages (STR
+	  #1478)
+	- Fixed support for HEAD requests in the scheduler (STR
+	  #1481)
+
+
+CHANGES IN CUPS V1.2b2
+
+	- Updated the CUPS design description.
+	- Added --enable-32bit and --enable-64bit configure
+	  options to allow building of separate 32/64-bit
+	  libraries on systems that support both environments
+	  (STR #1472)
+	- Various compiler warning fixes.
+	- Fixes for Solaris 10 builds against old GNU TLS and
+	  LDAP libraries.
+	- Added a cupsArrayUserData() function to retrieve the
+	  user data pointer for an array (useful for typing
+	  arrays)
+	- The ppdEmitString() function did not compute the
+	  required buffer size properly, leading to dropped
+	  characters on the end of the printer commands in pstops
+	  and imagetops (STR #1470)
+
+
+CHANGES IN CUPS V1.2b1
+
+	- The serial backend now supports Equinox 8-port serial
+	  hubs (STR #526)
+	- The IPP backend now supports a compression option to
+	  compress print files as they are sent to the remote
+	  server (STR #956)
+	- The CUPS browse protocol now supports passing of
+	  default options and browse timeout values from the
+	  server to the clients (STR #800)
+	- Implicit classes that timed out could cause the
+	  scheduler to crash (STR #1439)
+	- Added DragonFly support in local device backends (STR
+	  #1362)
+	- Added LDAP printer browsing support (STR #338)
+	- Added official support for printer maintenance commands
+	  via the CUPS Command file format and hooks in the
+	  printer-type and web interfaces (STR #932)
+	- The HP-GL/2 filter could get in an infinite loop trying
+	  to convert HP-PCL files (STR #1415)
+	- CUPS now implements the HTTP/1.1 Expect header (STR
+	  #1407)
+	- Options in PPD files are no longer automatically put in
+	  an "Extra" group; rather, all options that are not
+	  inside an Open/CloseGroup will be placed in the
+	  "General" group (STR #1385)
+	- The scheduler now creates a job-uuid attribute that
+	  uniquely identifies a job on a network (STR #1410)
+	- The init script now unsets the TMPDIR environment
+	  variable to prevent user temporary directories from
+	  being used by cupsd accidentally (STR #1424)
+	- Added support for launchd on MacOS X.
+	- Added support for notify_post on MacOS X.
+	- Added support for DBUS on Linux.
+	- All of the Berkeley (except for lpc) and System V
+	  commands now support specification of user, host, and
+	  port (STR #1028, STR #1029, STR #1087)
+	- The lpmove command now allows you to move all jobs for
+	  a given queue (STR #56)
+	- The web interface now supports moving of a job or jobs
+	  to another queue (STR #56)
+	- The web interface now provides searching, paging, and
+	  changing of the sort/display order of classes, jobs,
+	  and printers.
+	- cupsaddsmb now accepts a password on the command-line
+	  and supports passwords with special characters (STR
+	  #822, STR #1236)
+	- ppdLoad*() no longer tries to "fix" bad characters in
+	  UI text (STR #1101)
+	- Printer names can now (reliably) contain Unicode
+	  characters (STR #896)
+	- The lpstat command now shows the time and date of the
+	  last printer state change instead of the hardcoded "Jan
+	  01 00:00" (STR #659)
+	- The scheduler now adds a job-actual-printer-uri
+	  attribute to job objects when printing to a class (STR
+	  #116)
+	- The scheduler now logs log file open errors to the
+	  system log (STR #1289)
+	- The scheduler now sets the job-originating-user-name to
+	  the authenticated username, if available (STR #1318)
+	- The scheduler now only updates the permissions of SSL
+	  keys and certificates when they are under the
+	  ServerRoot directory (STR #1324)
+	- The rastertodymo driver has been renamed to
+	  rastertolabel (a symlink is installed so that existing
+	  queues continue to work) and now also supports Zebra's
+	  CPCL language.
+	- The lpstat command could show the wrong active job for
+	  a printer (STR #1301)
+	- Fixed a potential crash problem in the scheduler when
+	  aborting a CGI program (STR #1290)
+	- Added a "cancel all jobs" button to the class and
+	  printer web interfaces (STR #1140)
+	- The add-printer web page now shows the
+	  set-printer-options page after the printer has been
+	  added (STR #690)
+	- The classes web page now provides links to each of the
+	  member printers (STR #307)
+	- CUPS now handles HTTP request/response lines up to 32k
+	  in length; this is mainly for better cookie support
+	  (STR #1274)
+	- Added support for the Apache PassEnv and SetEnv
+	  directives to cupsd.conf (STR #853)
+	- Added large file (64-bit) support (STR #541)
+	- Fixed a performance issue with the ippReadIO()
+	  implementation (STR #1284)
+	- Fixed a performance issue with the scheduler's implicit
+	  class implementation (STR #1283)
+	- The pdftops filter now adds the Title and Creator
+	  fields from the PDF file to the PostScript document
+	  comments section (STR #539, STR #830)
+	- Added a new cups_array_t and cupsArray*() functions to
+	  the CUPS API to support sorted lists of data.
+	- Made the CUPS API library thread-safe (STR #1276)
+	- Added "media" option support for EFI EFMediaType option
+	  (STR #902)
+	- Added write buffering to the HTTP code to improve
+	  performance (STR #547)
+	- The scheduler now uses the attributes-natural-language
+	  attribute to localize banner pages (STR #386)
+	- The scheduler now returns the address that was used to
+	  connect to it (STR #1076)
+	- Fixed a problem with N-up printing and OpenOffice (STR
+	  #576)
+	- Added support for the GCC position independent
+	  executable options (STR #1209)
+	- Added new BrowseLocalProtocols and
+	  BrowseRemoteProtocols directives to cupsd.conf,
+	  allowing for different browse protocols for local and
+	  remote printers (STR #877)
+	- PPD files can now contain strings up to 256k in length
+	  (STR #1215)
+	- The pstops filter now supports the IncludeFeature DSC
+	  comment (STR #1212)
+	- The pstops filter now disables the setpagedevice
+	  procedure when doing N-up printing (STR #1161)
+	- The serial backend now supports "stop=1", "stop=2",
+	  "parity=space", and "parity=mark" options (STR #1155)
+	- "make install" no longer overwrites an existing PAM
+	  configuration file (STR #1064)
+	- The scheduler now closes all files on startup when run
+	  in daemon mode (STR #1009)
+	- Added a new RGBW colorspace to the CUPS raster format
+	  (STR #1071)
+	- The pdftops filter now sets the page size based on the
+	  media box when not scaling the output (STR #912)
+	- The pdftops filter now supports masked images (STR
+	  #281)
+	- The pdftops filter produced large output when rendering
+	  PDF files containing lot of repeated images (STR #327)
+	- The pdftops filter now minimizes print processing of
+	  PDF files when using the page-ranges option (STR #273)
+	- Updated pdftops filter to Xpdf 3.01.
+	- Added new cupsBackchannelRead() and
+	  cupsBackchannelWrite() functions, as well as
+	  backchannel support to the parallel, serial, socket,
+	  and USB backends (STR #1252)
+	- The parallel and USB backends now treat a "no space
+	  available" error as an out-of-paper condition (STR
+	  #1225)
+	- The "lpc" command now supports the "status all" command
+	  (STR #1004)
+	- ippReadIO() did not read collections properly (STR
+	  #1249)
+	- The "make test" script now creates the test files in
+	  "/tmp/cups-$USER" instead of "/tmp/$USER" (STR #981)
+	- All backends now abort on error when printing a job to
+	  a class - this allows the next printer in the class to
+	  print the job (STR #1084)
+	- The scheduler now verifies that a printer supports
+	  Letter or A4 media sizes before setting them as the
+	  initial default (STR #1250)
+	- The cupstestppd program now flags bad Resolution
+	  options (STR #1269)
+	- The USB backend now retries printing when the printer
+	  is disconnected or turned off (STR #1267)
+	- Added new httpGetHostname() function to CUPS API, and
+	  use it instead of gethostname() so that the web
+	  interface will work correctly on systems whose hostname
+	  is not the FQDN (STR #1266)
+	- The scheduler now stops printers if the backend for the
+	  queue is missing on startup (STR #1265)
+	- The configure script now supports "--disable-library"
+	  to disable particular image file format support
+	  libraries, even if they are available on the build
+	  system (STR #1248)
+	- The IPP backend did not always report on the total
+	  number of pages that were printed (STR #1251)
+	- The lpstat program could display garbage date and time
+	  values for locales whose date format exceeded 31
+	  characters (STR #1263)
+	- The cupstestppd program would segfault when testing
+	  certain broken PPD files (STR #1268)
+	- Dramatically reduced the overhead of implicit classes.
+	- Added new cupsDir*() functions to CUPS API.
+	- Printers can now be published individually for sharing.
+	- Fixed a bug in the scheduler's startup signalling code
+	  which caused cupsd to send the SIGUSR1 signal to the
+	  init process instead of the original parent process
+	  (STR #1258)
+	- Added new on-line help CGI to web interface to provide
+	  searchable help.
+	- Devices are now tracked dynamically, with each query
+	  doing a new device scan.  This eliminates a previous
+	  startup delay caused by slow backends and allows new
+	  printers to be seen without restarting the server,
+	  however it limits the amount of device URI checking
+	  that can be done (basically now the scheduler only
+	  requires a URI with a method that is a listed backend)
+	- Added new printer auto-detection, server configuration,
+	  and log file viewing to the administration web page.
+	- Added new "set allowed users" web interface to set the
+	  list of allowed users for a printer or class.
+	- The scheduler, command-line, and web interfaces now
+	  limit the list of printers and classes to those
+	  accessible by a user.
+	- cupsMarkOptions() now handles more non-standard
+	  duplexing options and choices (STR #915)
+	- cups-lpd now honors remote banner requests with the
+	  "standard" banner whenever a printer does not have one
+	  defined (STR #1220)
+	- The scheduler's denial-of-service checks did not work
+	  properly with IPv6 addresses (STR #1134)
+	- The lp and lpr commands did not error out properly when
+	  they were unable to write to a temporary file (STR
+	  #1129)
+	- The pstops filter did not handle Adobe-specific
+	  comments in Windows NT driver output (STR #1085)
+	- "lpstat -l -p" incorrectly reported the printer
+	  interface (STR #936)
+	- The web interface now operates exclusively with the
+	  UTF-8 encoding, and sends the appropriate character set
+	  and header information to the web browser (STR #919,
+	  STR #1007)
+	- Added a "set allowed users" interface to the web
+	  interface so that you can set the list of allowed or
+	  denied users/groups for a printer or class.
+	- Disallow the "#" character in printer names, since it
+	  has special meaning in the shell, config files, and in
+	  URIs (STR #917, STR #1202)
+	- Added a new application/x-csource MIME type, and
+	  support for it to the texttops filter so that you can
+	  pretty print plain text files without the C/C++
+	  keywords being highlighted.
+	- The pdftops filter did not compile with GCC 4.0 (STR
+	  #1226)
+	- The texttops filter did not highlight preprocessor
+	  directives followed by a tab properly.
+	- HP PJL output now uses both JOB DISPLAY and RDYMSG
+	  commands to show the current job on the printer's
+	  display (STR #1218)
+	- Local authentication certificates are now stored in
+	  /var/run/cups/certs by default instead of
+	  /etc/cups/certs (STR #1211)
+	- Backends now use "&" to separate options in device
+	  URIs; "+" is still recognized but is deprecated (STR
+	  #842)
+	- The USB backend no longer supports the usb:/dev/foo
+	  format on systems that support device ID queries.
+	- Forced classification markings did not work when the
+	  job-sheets parameters were "none,none".
+	- "lpstat -l -p" incorrectly showed all users as allowed,
+	  even if the queue was restricted to certain users (STR
+	  #801)
+	- The scheduler now automatically detects SSL/TLS clients
+	  without using the SSLPort/SSLListen directives.
+	- The CUPS API and scheduler no longer support SSLv2-
+	  encrypted connections.
+	- Updated the cupsaddsmb utility to correctly export the
+	  CUPS driver for Windows.
+	- Fixed a signal-handling bug in httpRead() which
+	  ultimately caused the server to print multiple copies
+	  when it was busy (STR #1184)
+	- The cupsFile API now uses the O_APPEND option when
+	  opening files in append mode (STR #990)
+	- The md5.h header and md5_* functions are now officially
+	  private and have been renamed to avoid conflicts with
+	  other implementations with the same name.
+	- The pdftops filter incorrectly embedded some Type1
+	  fonts (STR #1093)
+	- The scheduler didn't detect a closed connection in the
+	  middle of an IPP request (STR #1153)
+	- The scheduler could block trying to read the job status
+	  if there was input pending and the job was cancelled in
+	  the same input cycle (STR #1157)
+	- The scheduler could crash when deleting a class due to
+	  infinite recursion.
+	- Updated the Zebra ZPL label printer driver to use the
+	  run-length encoding and support more options.
+	- Updated serial backend to scan for /dev/ttyC* as well
+	  as /dev/ttyc* for Cyclades serial ports (STR #1049)
+	- The scheduler could hang reading the job status under
+	  certain circumstances (STR #1068)
+	- The USB backend termination signal code was inverted
+	  (STR #1046)
+	- Moved enable and disable commands to sbindir to be
+	  consistent.
+	- Added new cupsRasterInterpretPPD() function for RIP
+	  filters to setup the raster page header from
+	  PostScript commands in a PPD file.
+	- The CUPS browsing protocol now offers a "delete" bit
+	  to remove printers as soon as they are deleted on the
+	  server or as soon as the server shuts down gracefully
+	  (STR #793)
+	- The CUPS_SERVER and ServerName directives (client.conf
+	  and ~/.cupsrc) may now contain names of the form
+	  "server:port" and "/path/to/domain/socket".
+	- The "cancel -u user" command now works for ordinary
+	  users (STR #751)
+	- Added test run support to "make test" target (STR #64)
+	- Added domain socket support (STR #656)
+	- Added BrowseLocalOptions directive to allow the
+	  administrator to add printer URI options to the browse
+	  URI, e.g. "encryption=required" (STR #732)
+	- Added BrowseRemoteOptions directive to allow the
+	  administrator to add standard URI options to the
+	  remote printer URI, e.g. "encryption=required" (STR
+	  #732)
+	- Now put "-I.." compiler option in front of all others
+	  to ensure that local CUPS headers are used before
+	  installed headers (STR #437)
+	- New cupsLangPrintf() and cupsLangPuts() for localized
+	  interfaces.
+	- Now support custom attributes and extended options in
+	  PPD files.
+	- Now provide functions to save PPD files.
+	- New policy mechanism allows per-operation and
+	  per-printer control over what users and groups are
+	  allowed to do various IPP operations.
+	- New error policy mechanism to control how aborted
+	  backend errors are handled by the scheduler
+	  (abort-job, retry-job, requeue-job, stop-printer)
+	- Updated the printer test page with a better color
+	  wheel and a separate grayscale ramp.
+	- A single backend process is now run to send all print
+	  data for a job.
+	- Backends and filters can now send and receive
+	  backchannel data over file descriptor 3.
+	- Updated the raster stream format to support more
+	  user-defined attributes and to do compression of the
+	  page data.