summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rwxr-xr-xdh144
-rw-r--r--man/po4a/po/debhelper.pot353
-rw-r--r--man/po4a/po/es.po452
-rw-r--r--man/po4a/po/fr.po478
4 files changed, 720 insertions, 707 deletions
diff --git a/dh b/dh
index 16aa395..3afec52 100755
--- a/dh
+++ b/dh
@@ -626,6 +626,8 @@ elsif ($dh{BEFORE}) {
# Now run the commands in the sequence.
foreach my $i (0..$stoppoint) {
+ my $command=$sequence[$i];
+
# Figure out which packages need to run this command.
my @exclude;
foreach my $package (@packages) {
@@ -640,92 +642,84 @@ foreach my $i (0..$stoppoint) {
next;
}
- run($sequence[$i], \@packages, \@exclude, @options);
+ my $rules_target = rules_target($command);
+ if (defined $rules_target) {
+ # Don't pass DH_ environment variables, since this is
+ # a fresh invocation of debian/rules and any sub-dh commands.
+ delete $ENV{DH_INTERNAL_OPTIONS};
+ delete $ENV{DH_INTERNAL_OVERRIDE};
+ run("debian/rules", $rules_target);
+ next;
+ }
+
+ my @opts=@options;
+ # If some packages are excluded, add flags
+ # to prevent them from being acted on.
+ push @opts, map { "-N$_" } @exclude;
+
+ # Check for override targets in debian/rules, and run instead of
+ # the usual command.
+ next if run_override("override_".$command, $command,
+ \@packages, \@exclude, @opts);
+
+ run($command, @opts);
}
sub run {
my $command=shift;
- my @packages=@{shift()};
- my @exclude=@{shift()};
my @options=@_;
-
- # If some packages are excluded, add flags
- # to prevent them from being acted on.
- push @options, map { "-N$_" } @exclude;
- # Check for override targets in debian/rules and
- # run them instead of running the command directly.
- my $override_command;
- my $has_explicit_target = rules_explicit_target("override_".$command);
+ # Include additional command options if any
+ unshift @options, @{$command_opts{$command}}
+ if exists $command_opts{$command};
- my $rules_target = rules_target($command);
- if (defined $rules_target) {
- # Don't pass DH_ environment variables, since this is
- # a fresh invocation of debian/rules and any sub-dh
- # commands.
- $override_command=$command;
- delete $ENV{DH_INTERNAL_OPTIONS};
- delete $ENV{DH_INTERNAL_OVERRIDE};
- $command="debian/rules";
- @options=$rules_target;
- }
- elsif (defined $has_explicit_target) {
- $override_command=$command;
- # Check if target isn't noop
- if ($has_explicit_target) {
- # This passes the options through to commands called
- # inside the target.
- $ENV{DH_INTERNAL_OPTIONS}=join("\x1e", @options);
- $ENV{DH_INTERNAL_OVERRIDE}=$command;
- $command="debian/rules";
- @options="override_".$override_command;
- }
- else {
- $command = undef;
- }
- }
- else {
- # Pass additional command options if any
- unshift @options, @{$command_opts{$command}} if exists $command_opts{$command};
- }
+ # 3 space indent lines the command being run up under the
+ # sequence name after "dh ".
+ print " ".escape_shell($command, @options)."\n";
- if (defined $command) {
- # 3 space indent lines the command being run up under the
- # sequence name after "dh ".
- print " ".escape_shell($command, @options)."\n";
+ return if $dh{NO_ACT};
+
+ my $ret=system($command, @options);
+ if ($ret >> 8 != 0) {
+ exit $ret >> 8;
}
- else {
- print " ", "# Skipping ", $override_command, " - empty override", "\n";
+ elsif ($ret) {
+ exit 1;
}
-
- if (! $dh{NO_ACT}) {
- if (defined $command) {
- my $ret=system($command, @options);
-
- if ($ret >> 8 != 0) {
- exit $ret >> 8;
- }
- elsif ($ret) {
- exit 1;
- }
- }
-
- if (defined $override_command) {
- # Update log for overridden command now that it has
- # finished successfully.
- # (But avoid logging for dh_clean since it removes
- # the log earlier.)
- if ($override_command ne 'dh_clean') {
- my %packages=map { $_ => 1 } @packages;
- map { delete $packages{$_} } @exclude;
- write_log($override_command, keys %packages);
- commit_override_log(keys %packages);
- }
+}
- delete $ENV{DH_INTERNAL_OPTIONS};
- delete $ENV{DH_INTERNAL_OVERRIDE};
- }
- }
+# Returns true if an override target exists for a command.
+sub run_override {
+ my $override=shift;
+ my $command=shift;
+ my @packages=@{shift()};
+ my @exclude=@{shift()};
+ my @options=@_;
+
+ my $has_explicit_target = rules_explicit_target($override);
+ return 0 unless defined $has_explicit_target; # no such override
+ return 1 if ! $has_explicit_target; # has empty override
+
+ # This passes the options through to commands called
+ # inside the target.
+ $ENV{DH_INTERNAL_OPTIONS}=join("\x1e", @options);
+ $ENV{DH_INTERNAL_OVERRIDE}=$command;
+ run("debian/rules", "override_".$command);
+ delete $ENV{DH_INTERNAL_OPTIONS};
+ delete $ENV{DH_INTERNAL_OVERRIDE};
+
+ # Update log for overridden command now that it has
+ # finished successfully.
+ # (But avoid logging for dh_clean since it removes
+ # the log earlier.)
+ if (! $dh{NO_ACT} && $command ne 'dh_clean') {
+ my %packages=map { $_ => 1 } @packages;
+ map { delete $packages{$_} } @exclude;
+ write_log($command, keys %packages);
+ commit_override_log(keys %packages);
+ }
+
+ return 1;
}
sub optimize_sequence {
diff --git a/man/po4a/po/debhelper.pot b/man/po4a/po/debhelper.pot
index f7dbdce..cc1b981 100644
--- a/man/po4a/po/debhelper.pot
+++ b/man/po4a/po/debhelper.pot
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2011-08-23 15:26-0400\n"
+"POT-Creation-Date: 2011-09-10 18:35-0400\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@@ -27,7 +27,7 @@ msgid "debhelper - the debhelper tool suite"
msgstr ""
#. type: =head1
-#: debhelper.pod:5 dh:12 dh_auto_build:12 dh_auto_clean:13 dh_auto_configure:12 dh_auto_install:15 dh_auto_test:12 dh_bugfiles:12 dh_builddeb:12 dh_clean:12 dh_compress:13 dh_desktop:12 dh_fixperms:12 dh_gconf:12 dh_gencontrol:12 dh_icons:13 dh_install:13 dh_installcatalogs:14 dh_installchangelogs:12 dh_installcron:12 dh_installdeb:12 dh_installdebconf:12 dh_installdirs:12 dh_installdocs:12 dh_installemacsen:12 dh_installexamples:12 dh_installifupdown:12 dh_installinfo:12 dh_installinit:12 dh_installlogcheck:12 dh_installlogrotate:12 dh_installman:13 dh_installmanpages:13 dh_installmenu:12 dh_installmime:12 dh_installmodules:14 dh_installpam:12 dh_installppp:12 dh_installudev:13 dh_installwm:12 dh_installxfonts:12 dh_link:13 dh_lintian:12 dh_listpackages:12 dh_makeshlibs:12 dh_md5sums:13 dh_movefiles:12 dh_perl:14 dh_prep:12 dh_python:13 dh_scrollkeeper:12 dh_shlibdeps:13 dh_strip:13 dh_suidregister:7 dh_testdir:12 dh_testroot:7 dh_undocumented:12 dh_usrlocal:15
+#: debhelper.pod:5 dh:12 dh_auto_build:12 dh_auto_clean:13 dh_auto_configure:12 dh_auto_install:15 dh_auto_test:13 dh_bugfiles:12 dh_builddeb:12 dh_clean:12 dh_compress:13 dh_desktop:12 dh_fixperms:12 dh_gconf:12 dh_gencontrol:12 dh_icons:13 dh_install:13 dh_installcatalogs:14 dh_installchangelogs:12 dh_installcron:12 dh_installdeb:12 dh_installdebconf:12 dh_installdirs:12 dh_installdocs:12 dh_installemacsen:12 dh_installexamples:12 dh_installifupdown:12 dh_installinfo:12 dh_installinit:12 dh_installlogcheck:12 dh_installlogrotate:12 dh_installman:13 dh_installmanpages:13 dh_installmenu:12 dh_installmime:12 dh_installmodules:14 dh_installpam:12 dh_installppp:12 dh_installudev:13 dh_installwm:12 dh_installxfonts:12 dh_link:13 dh_lintian:12 dh_listpackages:12 dh_makeshlibs:12 dh_md5sums:13 dh_movefiles:12 dh_perl:14 dh_prep:12 dh_python:13 dh_scrollkeeper:12 dh_shlibdeps:13 dh_strip:13 dh_suidregister:7 dh_testdir:12 dh_testroot:7 dh_undocumented:12 dh_usrlocal:15
msgid "SYNOPSIS"
msgstr ""
@@ -39,7 +39,7 @@ msgid ""
msgstr ""
#. type: =head1
-#: debhelper.pod:9 dh:16 dh_auto_build:16 dh_auto_clean:17 dh_auto_configure:16 dh_auto_install:19 dh_auto_test:16 dh_bugfiles:16 dh_builddeb:16 dh_clean:16 dh_compress:17 dh_desktop:16 dh_fixperms:16 dh_gconf:16 dh_gencontrol:16 dh_icons:17 dh_install:17 dh_installcatalogs:18 dh_installchangelogs:16 dh_installcron:16 dh_installdeb:16 dh_installdebconf:16 dh_installdirs:16 dh_installdocs:16 dh_installemacsen:16 dh_installexamples:16 dh_installifupdown:16 dh_installinfo:16 dh_installinit:16 dh_installlogcheck:16 dh_installlogrotate:16 dh_installman:17 dh_installmanpages:17 dh_installmenu:16 dh_installmime:16 dh_installmodules:18 dh_installpam:16 dh_installppp:16 dh_installudev:17 dh_installwm:16 dh_installxfonts:16 dh_link:17 dh_lintian:16 dh_listpackages:16 dh_makeshlibs:16 dh_md5sums:17 dh_movefiles:16 dh_perl:18 dh_prep:16 dh_python:17 dh_scrollkeeper:16 dh_shlibdeps:17 dh_strip:17 dh_suidregister:11 dh_testdir:16 dh_testroot:11 dh_undocumented:16 dh_usrlocal:19
+#: debhelper.pod:9 dh:16 dh_auto_build:16 dh_auto_clean:17 dh_auto_configure:16 dh_auto_install:19 dh_auto_test:17 dh_bugfiles:16 dh_builddeb:16 dh_clean:16 dh_compress:17 dh_desktop:16 dh_fixperms:16 dh_gconf:16 dh_gencontrol:16 dh_icons:17 dh_install:17 dh_installcatalogs:18 dh_installchangelogs:16 dh_installcron:16 dh_installdeb:16 dh_installdebconf:16 dh_installdirs:16 dh_installdocs:16 dh_installemacsen:16 dh_installexamples:16 dh_installifupdown:16 dh_installinfo:16 dh_installinit:16 dh_installlogcheck:16 dh_installlogrotate:16 dh_installman:17 dh_installmanpages:17 dh_installmenu:16 dh_installmime:16 dh_installmodules:18 dh_installpam:16 dh_installppp:16 dh_installudev:17 dh_installwm:16 dh_installxfonts:16 dh_link:17 dh_lintian:16 dh_listpackages:16 dh_makeshlibs:16 dh_md5sums:17 dh_movefiles:16 dh_perl:18 dh_prep:16 dh_python:17 dh_scrollkeeper:16 dh_shlibdeps:17 dh_strip:17 dh_suidregister:11 dh_testdir:16 dh_testroot:11 dh_undocumented:16 dh_usrlocal:19
msgid "DESCRIPTION"
msgstr ""
@@ -203,7 +203,7 @@ msgid "Verbose mode: show all commands that modify the package build directory."
msgstr ""
#. type: =item
-#: debhelper.pod:101 dh:76
+#: debhelper.pod:101 dh:56
msgid "B<--no-act>"
msgstr ""
@@ -602,7 +602,7 @@ msgid "This mode works like v2, with the following additions:"
msgstr ""
#. type: =item
-#: debhelper.pod:300 debhelper.pod:305 debhelper.pod:309 debhelper.pod:323 debhelper.pod:328 debhelper.pod:333 debhelper.pod:338 debhelper.pod:352 debhelper.pod:356 debhelper.pod:361 debhelper.pod:365 debhelper.pod:377 debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:407 debhelper.pod:414 debhelper.pod:418 debhelper.pod:422 debhelper.pod:437 debhelper.pod:441 debhelper.pod:449 debhelper.pod:454 debhelper.pod:468 debhelper.pod:473 debhelper.pod:479 debhelper.pod:484 debhelper.pod:488
+#: debhelper.pod:300 debhelper.pod:305 debhelper.pod:309 debhelper.pod:323 debhelper.pod:328 debhelper.pod:333 debhelper.pod:338 debhelper.pod:352 debhelper.pod:356 debhelper.pod:361 debhelper.pod:365 debhelper.pod:377 debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:407 debhelper.pod:414 debhelper.pod:418 debhelper.pod:422 debhelper.pod:437 debhelper.pod:441 debhelper.pod:449 debhelper.pod:454 debhelper.pod:468 debhelper.pod:473 debhelper.pod:480 debhelper.pod:485 debhelper.pod:489
msgid "-"
msgstr ""
@@ -843,25 +843,26 @@ msgstr ""
#. type: textblock
#: debhelper.pod:475
msgid ""
-"dh allows defining custom build, build-arch, and build-indep targets in "
-"debian/rules, without needing to manually define the other targets that "
-"depend on them."
+"dh is aware of the usual dependencies between targets in debian/rules. So, "
+"\"dh binary\" will run any build, build-arch, build-indep, install, etc "
+"targets that exist in the rules file. There's no need to define an explicit "
+"binary target with explicit dependencies on the other targets."
msgstr ""
#. type: textblock
-#: debhelper.pod:481
+#: debhelper.pod:482
msgid ""
"B<dh_auto_configure> does not include the source package name in "
"--libexecdir when using autoconf."
msgstr ""
#. type: textblock
-#: debhelper.pod:486
+#: debhelper.pod:487
msgid "B<dh> does not default to enabling --with=python-support"
msgstr ""
#. type: textblock
-#: debhelper.pod:490
+#: debhelper.pod:491
msgid ""
"All of the B<dh_auto_>I<*> debhelper programs and B<dh> set environment "
"variables listed by B<dpkg-buildflags>, unless they are already set. They "
@@ -869,17 +870,17 @@ msgid ""
msgstr ""
#. type: =head1
-#: debhelper.pod:498 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116 dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 dh_usrlocal:49
+#: debhelper.pod:499 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116 dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 dh_usrlocal:49
msgid "NOTES"
msgstr ""
#. type: =head2
-#: debhelper.pod:500
+#: debhelper.pod:501
msgid "Multiple binary package support"
msgstr ""
#. type: textblock
-#: debhelper.pod:502
+#: debhelper.pod:503
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
@@ -891,7 +892,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:510
+#: debhelper.pod:511
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, "
@@ -901,12 +902,12 @@ msgid ""
msgstr ""
#. type: =head2
-#: debhelper.pod:516
+#: debhelper.pod:517
msgid "Automatic generation of Debian install scripts"
msgstr ""
#. type: textblock
-#: debhelper.pod:518
+#: debhelper.pod:519
msgid ""
"Some debhelper commands will automatically generate parts of Debian "
"maintainer scripts. If you want these automatically generated things "
@@ -917,21 +918,21 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:525
+#: debhelper.pod:526
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
msgstr ""
#. type: textblock
-#: debhelper.pod:528
+#: debhelper.pod:529
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
msgstr ""
#. type: textblock
-#: debhelper.pod:531
+#: debhelper.pod:532
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a Perl script. If you would like to embed it into a Perl script, here "
@@ -940,7 +941,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: debhelper.pod:536
+#: debhelper.pod:537
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
@@ -952,12 +953,12 @@ msgid ""
msgstr ""
#. type: =head2
-#: debhelper.pod:542
+#: debhelper.pod:543
msgid "Automatic generation of miscellaneous dependencies."
msgstr ""
#. type: textblock
-#: debhelper.pod:544
+#: debhelper.pod:545
msgid ""
"Some debhelper commands may make the generated package need to depend on "
"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
@@ -969,7 +970,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:552
+#: debhelper.pod:553
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called "
@@ -978,7 +979,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:557
+#: debhelper.pod:558
msgid ""
"This is entirely independent of the standard B<${shlibs:Depends}> generated "
"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by "
@@ -987,19 +988,19 @@ msgid ""
msgstr ""
#. type: =head2
-#: debhelper.pod:562
+#: debhelper.pod:563
msgid "Package build directories"
msgstr ""
#. type: textblock
-#: debhelper.pod:564
+#: debhelper.pod:565
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/I<package>."
msgstr ""
#. type: textblock
-#: debhelper.pod:567
+#: debhelper.pod:568
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the B<-P> flag. For example, \"B<dh_installdocs "
@@ -1011,12 +1012,12 @@ msgid ""
msgstr ""
#. type: =head2
-#: debhelper.pod:575
+#: debhelper.pod:576
msgid "udebs"
msgstr ""
#. type: textblock
-#: debhelper.pod:577
+#: debhelper.pod:578
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>, and "
@@ -1027,12 +1028,12 @@ msgid ""
msgstr ""
#. type: =head2
-#: debhelper.pod:584
+#: debhelper.pod:585
msgid "Build depends"
msgstr ""
#. type: textblock
-#: debhelper.pod:586
+#: debhelper.pod:587
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in F<debian/control>. You should build-depend on a "
@@ -1041,7 +1042,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: debhelper.pod:592
+#: debhelper.pod:593
#, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
@@ -1049,51 +1050,51 @@ msgid ""
msgstr ""
#. type: =head1
-#: debhelper.pod:594
+#: debhelper.pod:595
msgid "ENVIRONMENT"
msgstr ""
#. type: =item
-#: debhelper.pod:598
+#: debhelper.pod:599
msgid "B<DH_VERBOSE>"
msgstr ""
#. type: textblock
-#: debhelper.pod:600
+#: debhelper.pod:601
msgid ""
"Set to B<1> to enable verbose mode. Debhelper will output every command it "
"runs that modifies files on the build system."
msgstr ""
#. type: =item
-#: debhelper.pod:603
+#: debhelper.pod:604
msgid "B<DH_COMPAT>"
msgstr ""
#. type: textblock
-#: debhelper.pod:605
+#: debhelper.pod:606
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in F<debian/compat>."
msgstr ""
#. type: =item
-#: debhelper.pod:608
+#: debhelper.pod:609
msgid "B<DH_NO_ACT>"
msgstr ""
#. type: textblock
-#: debhelper.pod:610
+#: debhelper.pod:611
msgid "Set to B<1> to enable no-act mode."
msgstr ""
#. type: =item
-#: debhelper.pod:612
+#: debhelper.pod:613
msgid "B<DH_OPTIONS>"
msgstr ""
#. type: textblock
-#: debhelper.pod:614
+#: debhelper.pod:615
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands. Command-specific options will be ignored by commands "
@@ -1101,7 +1102,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:618
+#: debhelper.pod:619
msgid ""
"This is useful in some situations, for example, if you need to pass B<-p> to "
"all debhelper commands that will be run. One good way to set B<DH_OPTIONS> "
@@ -1110,12 +1111,12 @@ msgid ""
msgstr ""
#. type: =item
-#: debhelper.pod:623
+#: debhelper.pod:624
msgid "B<DH_ALWAYS_EXCLUDE>"
msgstr ""
#. type: textblock
-#: debhelper.pod:625
+#: debhelper.pod:626
msgid ""
"If set, this adds the value the variable is set to to the B<-X> options of "
"all commands that support the B<-X> option. Moreover, B<dh_builddeb> will "
@@ -1123,7 +1124,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:629
+#: debhelper.pod:630
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories from "
@@ -1134,44 +1135,44 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:636
+#: debhelper.pod:637
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"B<DH_ALWAYS_EXCLUDE=CVS:.svn>"
msgstr ""
#. type: =head1
-#: debhelper.pod:641 dh:866 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122 dh_builddeb:123 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:258 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114
+#: debhelper.pod:642 dh:858 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122 dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:259 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114
msgid "SEE ALSO"
msgstr ""
#. type: =item
-#: debhelper.pod:645
+#: debhelper.pod:646
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr ""
#. type: textblock
-#: debhelper.pod:647
+#: debhelper.pod:648
msgid "A set of example F<debian/rules> files that use debhelper."
msgstr ""
#. type: =item
-#: debhelper.pod:649
+#: debhelper.pod:650
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr ""
#. type: textblock
-#: debhelper.pod:651
+#: debhelper.pod:652
msgid "Debhelper web site."
msgstr ""
#. type: =head1
-#: debhelper.pod:655 dh:872 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130 dh_builddeb:129 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82 dh_installlogrotate:56 dh_installman:264 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
+#: debhelper.pod:656 dh:864 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130 dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82 dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
msgid "AUTHOR"
msgstr ""
#. type: textblock
-#: debhelper.pod:657 dh:874 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:131 dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90 dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:266 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36
+#: debhelper.pod:658 dh:866 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128 dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90 dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:267 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36
msgid "Joey Hess <joeyh@debian.org>"
msgstr ""
@@ -1184,8 +1185,7 @@ msgstr ""
#: dh:14
msgid ""
"B<dh> I<sequence> [B<--with> I<addon>[B<,>I<addon> ...]] [B<--list>] "
-"[B<--until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] "
-"[B<--remaining>] [S<I<debhelper options>>]"
+"[S<I<debhelper options>>]"
msgstr ""
#. type: textblock
@@ -1219,7 +1219,7 @@ msgid ""
msgstr ""
#. type: =head1
-#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31 dh_auto_install:43 dh_auto_test:30 dh_bugfiles:50 dh_builddeb:21 dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26 dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56 dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66 dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39 dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42 dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40 dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31 dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51 dh_makeshlibs:43 dh_md5sums:28 dh_movefiles:38 dh_perl:31 dh_prep:26 dh_python:39 dh_shlibdeps:26 dh_strip:35 dh_testdir:23 dh_usrlocal:39
+#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31 dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21 dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26 dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56 dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66 dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39 dh_installinfo:31 dh_installinit:48 dh_installlogcheck:40 dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40 dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31 dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51 dh_makeshlibs:43 dh_md5sums:28 dh_movefiles:38 dh_perl:31 dh_prep:26 dh_python:39 dh_shlibdeps:26 dh_strip:35 dh_testdir:23 dh_usrlocal:39
msgid "OPTIONS"
msgstr ""
@@ -1254,84 +1254,33 @@ msgstr ""
msgid "List all available addons."
msgstr ""
-#. type: =item
-#: dh:56
-msgid "B<--until> I<cmd>"
-msgstr ""
-
#. type: textblock
#: dh:58
-msgid ""
-"Run commands in the sequence until and including I<cmd>, then stop. "
-"(Deprecated)"
-msgstr ""
-
-#. type: =item
-#: dh:61
-msgid "B<--before> I<cmd>"
-msgstr ""
-
-#. type: textblock
-#: dh:63
-msgid "Run commands in the sequence before I<cmd>, then stop. (Deprecated)"
-msgstr ""
-
-#. type: =item
-#: dh:66
-msgid "B<--after> I<cmd>"
-msgstr ""
-
-#. type: textblock
-#: dh:68
-msgid "Run commands in the sequence that come after I<cmd>. (Deprecated)"
-msgstr ""
-
-#. type: =item
-#: dh:71
-msgid "B<--remaining>"
-msgstr ""
-
-#. type: textblock
-#: dh:73
-msgid "Run all commands in the sequence that have yet to be run. (Deprecated)"
-msgstr ""
-
-#. type: textblock
-#: dh:78
msgid "Prints commands that would run for a given sequence, but does not run them."
msgstr ""
#. type: textblock
-#: dh:82
-msgid ""
-"All other options passed to B<dh> are passed on to each command it "
-"runs. This can be used to set an option like B<-v> or B<-X> or B<-N>, as "
-"well as for more specialised options."
-msgstr ""
-
-#. type: textblock
-#: dh:86
+#: dh:62
msgid ""
-"In the above options, I<cmd> can be a full name of a debhelper command, or a "
-"substring. It'll first search for a command in the sequence exactly matching "
-"the name, to avoid any ambiguity. If there are multiple substring matches, "
-"the last one in the sequence will be used."
+"Other options passed to B<dh> are passed on to each command it runs. This "
+"can be used to set an option like B<-v> or B<-X> or B<-N>, as well as for "
+"more specialised options."
msgstr ""
#. type: =head1
-#: dh:117 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+#: dh:66 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
msgid "EXAMPLES"
msgstr ""
#. type: textblock
-#: dh:119
+#: dh:68
msgid ""
"To see what commands are included in a sequence, without actually doing "
"anything:"
msgstr ""
#. type: verbatim
-#: dh:122
+#: dh:71
#, no-wrap
msgid ""
"\tdh binary-arch --no-act\n"
@@ -1339,14 +1288,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:124
+#: dh:73
msgid ""
"This is a very simple rules file, for packages where the default sequences "
"of commands work with no additional options."
msgstr ""
#. type: verbatim
-#: dh:127 dh:134 dh:148 dh:161
+#: dh:76 dh:83 dh:97 dh:110
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1356,7 +1305,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:131
+#: dh:80
#, no-wrap
msgid ""
"Often you'll want to pass an option to a specific debhelper command. The\n"
@@ -1365,7 +1314,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:138
+#: dh:87
#, no-wrap
msgid ""
"\toverride_dh_strip:\n"
@@ -1374,7 +1323,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:141
+#: dh:90
#, no-wrap
msgid ""
"\toverride_dh_installdocs:\n"
@@ -1383,7 +1332,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:144
+#: dh:93
msgid ""
"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
"can't guess what to do for a strange package. Here's how to avoid running "
@@ -1391,7 +1340,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:152
+#: dh:101
#, no-wrap
msgid ""
"\toverride_dh_auto_configure:\n"
@@ -1400,7 +1349,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:155
+#: dh:104
#, no-wrap
msgid ""
"\toverride_dh_auto_build:\n"
@@ -1409,14 +1358,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:158
+#: dh:107
msgid ""
"Another common case is wanting to do something manually before or after a "
"particular debhelper command is run."
msgstr ""
#. type: verbatim
-#: dh:165
+#: dh:114
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
@@ -1426,7 +1375,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:169
+#: dh:118
msgid ""
"Python tools are not run by dh by default, due to the continual change in "
"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
@@ -1434,7 +1383,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:173
+#: dh:122
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1444,7 +1393,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:177
+#: dh:126
msgid ""
"If your package uses autotools and you want to freshen F<config.sub> and "
"F<config.guess> with newer versions from the B<autotools-dev> package at "
@@ -1453,7 +1402,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:182
+#: dh:131
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1463,14 +1412,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:186
+#: dh:135
msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
msgstr ""
#. type: verbatim
-#: dh:190
+#: dh:139
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1479,27 +1428,8 @@ msgid ""
"\n"
msgstr ""
-#. type: verbatim
-#: dh:194
-#, no-wrap
-msgid ""
-"To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
-"sequence addons like this:\n"
-"\t\n"
-msgstr ""
-
-#. type: verbatim
-#: dh:197
-#, no-wrap
-msgid ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@ --with quilt\n"
-"\n"
-msgstr ""
-
#. type: textblock
-#: dh:201
+#: dh:143
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
@@ -1507,7 +1437,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:205
+#: dh:147
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1517,14 +1447,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:209
+#: dh:151
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
msgstr ""
#. type: verbatim
-#: dh:212
+#: dh:154
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1534,14 +1464,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:216
+#: dh:158
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
msgstr ""
#. type: verbatim
-#: dh:219
+#: dh:161
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1551,14 +1481,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:223
+#: dh:165
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
msgstr ""
#. type: verbatim
-#: dh:226 dh:237 dh:254
+#: dh:168 dh:179 dh:196
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1568,7 +1498,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:230
+#: dh:172
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
@@ -1577,7 +1507,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:233
+#: dh:175
msgid ""
"Sometimes, you may need to make an override target only run commands when a "
"particular package is being built. This can be accomplished using "
@@ -1585,7 +1515,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:241
+#: dh:183
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
@@ -1597,7 +1527,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:247
+#: dh:189
msgid ""
"Finally, remember that you are not limited to using override targets in the "
"rules file when using B<dh>. You can also explicitly define any of the "
@@ -1608,7 +1538,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:258
+#: dh:200
#, no-wrap
msgid ""
"\tbuild-indep:\n"
@@ -1619,7 +1549,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:263
+#: dh:205
msgid ""
"Note that in the example above, dh will arrange for \"debian/rules build\" "
"to call your build-indep and build-arch targets. You do not need to "
@@ -1629,19 +1559,19 @@ msgid ""
msgstr ""
#. type: =head1
-#: dh:269
+#: dh:211
msgid "INTERNALS"
msgstr ""
#. type: textblock
-#: dh:271
+#: dh:213
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
msgstr ""
#. type: textblock
-#: dh:273
+#: dh:215
msgid ""
"Each debhelper command will record when it's successfully run in "
"F<debian/package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can "
@@ -1650,7 +1580,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:278
+#: dh:220
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
@@ -1659,14 +1589,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:283
+#: dh:225
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
msgstr ""
#. type: textblock
-#: dh:286
+#: dh:228
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
@@ -1674,13 +1604,74 @@ msgid ""
"as the name might suggest, is subject to change at any time."
msgstr ""
+#. type: =head1
+#: dh:233
+msgid "DEPRECATED OPTIONS"
+msgstr ""
+
+#. type: textblock
+#: dh:235
+msgid ""
+"The following options are deprecated. It's much better to use override "
+"targets instead."
+msgstr ""
+
+#. type: =item
+#: dh:240
+msgid "B<--until> I<cmd>"
+msgstr ""
+
+#. type: textblock
+#: dh:242
+msgid "Run commands in the sequence until and including I<cmd>, then stop."
+msgstr ""
+
+#. type: =item
+#: dh:244
+msgid "B<--before> I<cmd>"
+msgstr ""
+
+#. type: textblock
+#: dh:246
+msgid "Run commands in the sequence before I<cmd>, then stop."
+msgstr ""
+
+#. type: =item
+#: dh:248
+msgid "B<--after> I<cmd>"
+msgstr ""
+
+#. type: textblock
+#: dh:250
+msgid "Run commands in the sequence that come after I<cmd>."
+msgstr ""
+
+#. type: =item
+#: dh:252
+msgid "B<--remaining>"
+msgstr ""
+
+#. type: textblock
+#: dh:254
+msgid "Run all commands in the sequence that have yet to be run."
+msgstr ""
+
+#. type: textblock
+#: dh:258
+msgid ""
+"In the above options, I<cmd> can be a full name of a debhelper command, or a "
+"substring. It'll first search for a command in the sequence exactly matching "
+"the name, to avoid any ambiguity. If there are multiple substring matches, "
+"the last one in the sequence will be used."
+msgstr ""
+
#. type: textblock
-#: dh:868 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 dh_auto_install:87 dh_auto_test:60 dh_builddeb:125 dh_clean:144 dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:260 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116
+#: dh:860 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144 dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:261 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116
msgid "L<debhelper(7)>"
msgstr ""
#. type: textblock
-#: dh:870 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:127 dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
+#: dh:862 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124 dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:263 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
msgid "This program is a part of debhelper."
msgstr ""
@@ -1715,14 +1706,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh_auto_build:30 dh_auto_clean:32 dh_auto_configure:33 dh_auto_install:45 dh_auto_test:32
+#: dh_auto_build:30 dh_auto_clean:32 dh_auto_configure:33 dh_auto_install:45 dh_auto_test:33
msgid ""
"See L<debhelper(7)/B<BUILD SYSTEM OPTIONS>> for a list of common build "
"system selection and control options."
msgstr ""
#. type: =item
-#: dh_auto_build:35 dh_auto_clean:37 dh_auto_configure:38 dh_auto_install:56 dh_auto_test:37 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69 dh_installinit:99 dh_makeshlibs:91 dh_shlibdeps:37
+#: dh_auto_build:35 dh_auto_clean:37 dh_auto_configure:38 dh_auto_install:56 dh_auto_test:38 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69 dh_installinit:99 dh_makeshlibs:91 dh_shlibdeps:37
msgid "B<--> I<params>"
msgstr ""
@@ -1898,14 +1889,14 @@ msgid "dh_auto_test - automatically runs a package's test suites"
msgstr ""
#. type: textblock
-#: dh_auto_test:14
+#: dh_auto_test:15
msgid ""
"B<dh_auto_test> [S<I<build system options>>] [S<I<debhelper options>>] "
"[S<B<--> I<params>>]"
msgstr ""
#. type: textblock
-#: dh_auto_test:18
+#: dh_auto_test:19
msgid ""
"B<dh_auto_test> is a debhelper program that tries to automatically run a "
"package's test suite. It does so by running the appropriate command for the "
@@ -1917,7 +1908,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh_auto_test:26
+#: dh_auto_test:27
msgid ""
"This is intended to work for about 90% of packages with a test suite. If it "
"doesn't work, you're encouraged to skip using B<dh_auto_test> at all, and "
@@ -1925,14 +1916,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh_auto_test:39
+#: dh_auto_test:40
msgid ""
"Pass I<params> to the program that is run. These can be used to supplement "
"or override the any standard parameters that B<dh_auto_test> passes."
msgstr ""
#. type: textblock
-#: dh_auto_test:46
+#: dh_auto_test:47
msgid ""
"If the B<DEB_BUILD_OPTIONS> environment variable contains B<nocheck>, no "
"tests will be performed."
@@ -2969,7 +2960,7 @@ msgid ""
msgstr ""
#. type: =item
-#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104 dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52 dh_installpam:35 dh_installppp:39 dh_installudev:39
+#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104 dh_installlogcheck:44 dh_installlogrotate:26 dh_installmodules:52 dh_installpam:35 dh_installppp:39 dh_installudev:39
msgid "B<--name=>I<name>"
msgstr ""
@@ -3932,7 +3923,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh_installlogcheck:48
+#: dh_installlogcheck:46
msgid ""
"Look for files named F<debian/package.name.logcheck.*> and install them into "
"the corresponding subdirectories of F<etc/logcheck/>, but use the specified "
diff --git a/man/po4a/po/es.po b/man/po4a/po/es.po
index 3054902..39b147e 100644
--- a/man/po4a/po/es.po
+++ b/man/po4a/po/es.po
@@ -31,7 +31,7 @@
msgid ""
msgstr ""
"Project-Id-Version: debhelper 8.0.0\n"
-"POT-Creation-Date: 2011-08-23 15:26-0400\n"
+"POT-Creation-Date: 2011-09-10 18:35-0400\n"
"PO-Revision-Date: 2010-11-11 22:28+0100\n"
"Last-Translator: Omar Campagne <ocampagne@gmail.com>\n"
"Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
@@ -70,7 +70,7 @@ msgstr "debhelper - El conjunto de herramientas debhelper"
# type: =head1
#. type: =head1
#: debhelper.pod:5 dh:12 dh_auto_build:12 dh_auto_clean:13
-#: dh_auto_configure:12 dh_auto_install:15 dh_auto_test:12 dh_bugfiles:12
+#: dh_auto_configure:12 dh_auto_install:15 dh_auto_test:13 dh_bugfiles:12
#: dh_builddeb:12 dh_clean:12 dh_compress:13 dh_desktop:12 dh_fixperms:12
#: dh_gconf:12 dh_gencontrol:12 dh_icons:13 dh_install:13
#: dh_installcatalogs:14 dh_installchangelogs:12 dh_installcron:12
@@ -100,7 +100,7 @@ msgstr ""
# type: =head1
#. type: =head1
#: debhelper.pod:9 dh:16 dh_auto_build:16 dh_auto_clean:17
-#: dh_auto_configure:16 dh_auto_install:19 dh_auto_test:16 dh_bugfiles:16
+#: dh_auto_configure:16 dh_auto_install:19 dh_auto_test:17 dh_bugfiles:16
#: dh_builddeb:16 dh_clean:16 dh_compress:17 dh_desktop:16 dh_fixperms:16
#: dh_gconf:16 dh_gencontrol:16 dh_icons:17 dh_install:17
#: dh_installcatalogs:18 dh_installchangelogs:16 dh_installcron:16
@@ -358,7 +358,7 @@ msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:101 dh:76
+#: debhelper.pod:101 dh:56
msgid "B<--no-act>"
msgstr "B<--no-act>"
@@ -911,7 +911,7 @@ msgstr "Este modo funciona como v2, con los siguientes añadidos:"
#: debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:407
#: debhelper.pod:414 debhelper.pod:418 debhelper.pod:422 debhelper.pod:437
#: debhelper.pod:441 debhelper.pod:449 debhelper.pod:454 debhelper.pod:468
-#: debhelper.pod:473 debhelper.pod:479 debhelper.pod:484 debhelper.pod:488
+#: debhelper.pod:473 debhelper.pod:480 debhelper.pod:485 debhelper.pod:489
msgid "-"
msgstr "-"
@@ -1227,25 +1227,26 @@ msgstr ""
#. type: textblock
#: debhelper.pod:475
msgid ""
-"dh allows defining custom build, build-arch, and build-indep targets in "
-"debian/rules, without needing to manually define the other targets that "
-"depend on them."
+"dh is aware of the usual dependencies between targets in debian/rules. So, "
+"\"dh binary\" will run any build, build-arch, build-indep, install, etc "
+"targets that exist in the rules file. There's no need to define an explicit "
+"binary target with explicit dependencies on the other targets."
msgstr ""
#. type: textblock
-#: debhelper.pod:481
+#: debhelper.pod:482
msgid ""
"B<dh_auto_configure> does not include the source package name in --"
"libexecdir when using autoconf."
msgstr ""
#. type: textblock
-#: debhelper.pod:486
+#: debhelper.pod:487
msgid "B<dh> does not default to enabling --with=python-support"
msgstr ""
#. type: textblock
-#: debhelper.pod:490
+#: debhelper.pod:491
msgid ""
"All of the B<dh_auto_>I<*> debhelper programs and B<dh> set environment "
"variables listed by B<dpkg-buildflags>, unless they are already set. They "
@@ -1254,7 +1255,7 @@ msgstr ""
# type: =head1
#. type: =head1
-#: debhelper.pod:498 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116
+#: debhelper.pod:499 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116
#: dh_installemacsen:67 dh_installexamples:53 dh_installinit:133
#: dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55
#: dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68
@@ -1264,13 +1265,13 @@ msgstr "NOTAS"
# type: =head2
#. type: =head2
-#: debhelper.pod:500
+#: debhelper.pod:501
msgid "Multiple binary package support"
msgstr "Compatibilidad con varios paquetes binarios"
# type: textblock
#. type: textblock
-#: debhelper.pod:502
+#: debhelper.pod:503
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
@@ -1291,7 +1292,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:510
+#: debhelper.pod:511
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
@@ -1307,13 +1308,13 @@ msgstr ""
# type: =head2
#. type: =head2
-#: debhelper.pod:516
+#: debhelper.pod:517
msgid "Automatic generation of Debian install scripts"
msgstr "Generación automática de los scripts de instalación de Debian"
# type: textblock
#. type: textblock
-#: debhelper.pod:518
+#: debhelper.pod:519
msgid ""
"Some debhelper commands will automatically generate parts of Debian "
"maintainer scripts. If you want these automatically generated things "
@@ -1331,7 +1332,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:525
+#: debhelper.pod:526
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
@@ -1341,7 +1342,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:528
+#: debhelper.pod:529
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
@@ -1351,7 +1352,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:531
+#: debhelper.pod:532
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a Perl script. If you would like to embed it into a Perl script, here "
@@ -1365,7 +1366,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: debhelper.pod:536
+#: debhelper.pod:537
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
@@ -1384,13 +1385,13 @@ msgstr ""
# type: =head2
#. type: =head2
-#: debhelper.pod:542
+#: debhelper.pod:543
msgid "Automatic generation of miscellaneous dependencies."
msgstr "Generación automática de diversas dependencias."
# type: textblock
#. type: textblock
-#: debhelper.pod:544
+#: debhelper.pod:545
#, fuzzy
#| msgid ""
#| "Some debhelper commands may make the generated package need to depend on "
@@ -1418,7 +1419,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:552
+#: debhelper.pod:553
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called B<"
@@ -1433,7 +1434,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:557
+#: debhelper.pod:558
msgid ""
"This is entirely independent of the standard B<${shlibs:Depends}> generated "
"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by L<dh_perl(1)"
@@ -1447,13 +1448,13 @@ msgstr ""
# type: =head2
#. type: =head2
-#: debhelper.pod:562
+#: debhelper.pod:563
msgid "Package build directories"
msgstr "Directorios de construcción del paquete"
# type: textblock
#. type: textblock
-#: debhelper.pod:564
+#: debhelper.pod:565
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/I<package>."
@@ -1464,7 +1465,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:567
+#: debhelper.pod:568
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the B<-P> flag. For example, \"B<dh_installdocs -Pdebian/tmp>"
@@ -1484,13 +1485,13 @@ msgstr ""
# type: =head2
#. type: =head2
-#: debhelper.pod:575
+#: debhelper.pod:576
msgid "udebs"
msgstr "udebs"
# type: textblock
#. type: textblock
-#: debhelper.pod:577
+#: debhelper.pod:578
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>, and "
@@ -1508,13 +1509,13 @@ msgstr ""
"F<preinst>, F<postrm>, F<prerm>, scripts F<config>, etc."
#. type: =head2
-#: debhelper.pod:584
+#: debhelper.pod:585
msgid "Build depends"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:586
+#: debhelper.pod:587
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in F<debian/control>. You should build-depend on a "
@@ -1529,7 +1530,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: debhelper.pod:592
+#: debhelper.pod:593
#, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
@@ -1540,19 +1541,19 @@ msgstr ""
# type: =head1
#. type: =head1
-#: debhelper.pod:594
+#: debhelper.pod:595
msgid "ENVIRONMENT"
msgstr "ENTORNO"
# type: =item
#. type: =item
-#: debhelper.pod:598
+#: debhelper.pod:599
msgid "B<DH_VERBOSE>"
msgstr "B<DH_VERBOSE>"
# type: textblock
#. type: textblock
-#: debhelper.pod:600
+#: debhelper.pod:601
msgid ""
"Set to B<1> to enable verbose mode. Debhelper will output every command it "
"runs that modifies files on the build system."
@@ -1563,13 +1564,13 @@ msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:603
+#: debhelper.pod:604
msgid "B<DH_COMPAT>"
msgstr "B<DH_COMPAT>"
# type: textblock
#. type: textblock
-#: debhelper.pod:605
+#: debhelper.pod:606
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in F<debian/compat>."
@@ -1579,25 +1580,25 @@ msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:608
+#: debhelper.pod:609
msgid "B<DH_NO_ACT>"
msgstr "B<DH_NO_ACT>"
# type: textblock
#. type: textblock
-#: debhelper.pod:610
+#: debhelper.pod:611
msgid "Set to B<1> to enable no-act mode."
msgstr "Defina como B<1> para habilitar el modo no-act."
# type: =item
#. type: =item
-#: debhelper.pod:612
+#: debhelper.pod:613
msgid "B<DH_OPTIONS>"
msgstr "B<DH_OPTIONS>"
# type: textblock
#. type: textblock
-#: debhelper.pod:614
+#: debhelper.pod:615
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands. Command-specific options will be ignored by commands "
@@ -1609,7 +1610,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:618
+#: debhelper.pod:619
msgid ""
"This is useful in some situations, for example, if you need to pass B<-p> to "
"all debhelper commands that will be run. One good way to set B<DH_OPTIONS> "
@@ -1624,13 +1625,13 @@ msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:623
+#: debhelper.pod:624
msgid "B<DH_ALWAYS_EXCLUDE>"
msgstr "B<DH_ALWAYS_EXCLUDE>"
# type: textblock
#. type: textblock
-#: debhelper.pod:625
+#: debhelper.pod:626
msgid ""
"If set, this adds the value the variable is set to to the B<-X> options of "
"all commands that support the B<-X> option. Moreover, B<dh_builddeb> will "
@@ -1642,7 +1643,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:629
+#: debhelper.pod:630
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories from "
@@ -1660,7 +1661,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:636
+#: debhelper.pod:637
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"B<DH_ALWAYS_EXCLUDE=CVS:.svn>"
@@ -1670,15 +1671,15 @@ msgstr ""
# type: =head1
#. type: =head1
-#: debhelper.pod:641 dh:866 dh_auto_build:47 dh_auto_clean:50
-#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122
-#: dh_builddeb:123 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129
+#: debhelper.pod:642 dh:858 dh_auto_build:47 dh_auto_clean:50
+#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122
+#: dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129
#: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279
#: dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77
#: dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86
#: dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106
#: dh_installifupdown:69 dh_installinfo:77 dh_installinit:275
-#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:258
+#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:259
#: dh_installmanpages:197 dh_installmenu:87 dh_installmime:95
#: dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115
#: dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57
@@ -1691,39 +1692,39 @@ msgstr "VÉASE TAMBIÉN"
# type: =item
#. type: =item
-#: debhelper.pod:645
+#: debhelper.pod:646
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr "F</usr/share/doc/debhelper/examples/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:647
+#: debhelper.pod:648
msgid "A set of example F<debian/rules> files that use debhelper."
msgstr "Varios ficheros de ejemplo F<debian/rules> que usan debhelper."
# type: =item
#. type: =item
-#: debhelper.pod:649
+#: debhelper.pod:650
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr "L<http://kitenet.net/~joey/code/debhelper/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:651
+#: debhelper.pod:652
msgid "Debhelper web site."
msgstr "Sitio web de Debhelper."
# type: =head1
#. type: =head1
-#: debhelper.pod:655 dh:872 dh_auto_build:53 dh_auto_clean:56
-#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130
-#: dh_builddeb:129 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135
+#: debhelper.pod:656 dh:864 dh_auto_build:53 dh_auto_clean:56
+#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130
+#: dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135
#: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285
#: dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83
#: dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92
#: dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112
#: dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82
-#: dh_installlogrotate:56 dh_installman:264 dh_installmanpages:203
+#: dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203
#: dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65
#: dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93
#: dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264
@@ -1735,14 +1736,14 @@ msgstr "AUTOR"
# type: textblock
#. type: textblock
-#: debhelper.pod:657 dh:874 dh_auto_build:55 dh_auto_clean:58
-#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:131
+#: debhelper.pod:658 dh:866 dh_auto_build:55 dh_auto_clean:58
+#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128
#: dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90
#: dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152
#: dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315
#: dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77
#: dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58
-#: dh_installman:266 dh_installmanpages:205 dh_installmenu:97
+#: dh_installman:267 dh_installmanpages:205 dh_installmenu:97
#: dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73
#: dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234
#: dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178
@@ -1758,9 +1759,13 @@ msgstr "dh - Secuenciador de órdenes de debhelper"
#. type: textblock
#: dh:14
+#, fuzzy
+#| msgid ""
+#| "B<dh> I<sequence> [B<--with> I<addon>[B<,>I<addon> ...]] [B<--list>] [B<--"
+#| "until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] [B<--remaining>] "
+#| "[S<I<debhelper options>>]"
msgid ""
-"B<dh> I<sequence> [B<--with> I<addon>[B<,>I<addon> ...]] [B<--list>] [B<--"
-"until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] [B<--remaining>] "
+"B<dh> I<sequence> [B<--with> I<addon>[B<,>I<addon> ...]] [B<--list>] "
"[S<I<debhelper options>>]"
msgstr ""
"B<dh> I<secuencia> [B<--with> I<extensión>[,I<extensión>,...]] [B<--list>] "
@@ -1825,12 +1830,12 @@ msgstr ""
# type: =head1
#. type: =head1
#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31
-#: dh_auto_install:43 dh_auto_test:30 dh_bugfiles:50 dh_builddeb:21
+#: dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21
#: dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26
#: dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56
#: dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66
#: dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39
-#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42
+#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:40
#: dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40
#: dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31
#: dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51
@@ -1877,63 +1882,8 @@ msgstr "Lo contrario de B<--with>, desactiva la extensión dada."
msgid "List all available addons."
msgstr "Lista todas las extensiones disponibles."
-# type: =item
-#. type: =item
-#: dh:56
-msgid "B<--until> I<cmd>"
-msgstr "B<--until> I<orden>"
-
#. type: textblock
#: dh:58
-#, fuzzy
-#| msgid "Run commands in the sequence until and including I<cmd>, then stop."
-msgid ""
-"Run commands in the sequence until and including I<cmd>, then stop. "
-"(Deprecated)"
-msgstr ""
-"Ejecuta las órdenes en la secuencia hasta la I<orden>, inclusive, y cierra."
-
-# type: =item
-#. type: =item
-#: dh:61
-msgid "B<--before> I<cmd>"
-msgstr "B<--before> I<orden>"
-
-#. type: textblock
-#: dh:63
-#, fuzzy
-#| msgid "Run commands in the sequence before I<cmd>, then stop."
-msgid "Run commands in the sequence before I<cmd>, then stop. (Deprecated)"
-msgstr "Ejecuta las órdenes en la secuencia anteriores a I<orden>, y cierra."
-
-# type: =item
-#. type: =item
-#: dh:66
-msgid "B<--after> I<cmd>"
-msgstr "B<--after> I<orden>"
-
-#. type: textblock
-#: dh:68
-#, fuzzy
-#| msgid "Run commands in the sequence that come after I<cmd>."
-msgid "Run commands in the sequence that come after I<cmd>. (Deprecated)"
-msgstr "Ejecuta las órdenes en la secuencia posteriores a I<orden>."
-
-# type: =item
-#. type: =item
-#: dh:71
-msgid "B<--remaining>"
-msgstr "B<--remaining>"
-
-#. type: textblock
-#: dh:73
-#, fuzzy
-#| msgid "Run all commands in the sequence that have yet to be run."
-msgid "Run all commands in the sequence that have yet to be run. (Deprecated)"
-msgstr "Ejecuta todas las órdenes en la secuencia que aún no se han ejecutado."
-
-#. type: textblock
-#: dh:78
msgid ""
"Prints commands that would run for a given sequence, but does not run them."
msgstr ""
@@ -1941,38 +1891,29 @@ msgstr ""
"ejecuta."
#. type: textblock
-#: dh:82
+#: dh:62
+#, fuzzy
+#| msgid ""
+#| "All other options passed to B<dh> are passed on to each command it runs. "
+#| "This can be used to set an option like B<-v> or B<-X> or B<-N>, as well "
+#| "as for more specialised options."
msgid ""
-"All other options passed to B<dh> are passed on to each command it runs. "
-"This can be used to set an option like B<-v> or B<-X> or B<-N>, as well as "
-"for more specialised options."
+"Other options passed to B<dh> are passed on to each command it runs. This "
+"can be used to set an option like B<-v> or B<-X> or B<-N>, as well as for "
+"more specialised options."
msgstr ""
"Todas las demás opciones introducidas a B<dh> se introducen a cada orden que "
"ejecuta. Puede usar esto para definir una opción como B<-v>, B<-X> o B<-N>, "
"así como opciones más especializadas."
-#. type: textblock
-#: dh:86
-msgid ""
-"In the above options, I<cmd> can be a full name of a debhelper command, or a "
-"substring. It'll first search for a command in the sequence exactly matching "
-"the name, to avoid any ambiguity. If there are multiple substring matches, "
-"the last one in the sequence will be used."
-msgstr ""
-"En las opciones anteriores, I<orden> puede ser el nombre completo de una "
-"orden de debhelper, o una subcadena. Buscará en primer lugar una orden en la "
-"secuencia que coincide totalmente con el nombre, para evitar cualquier "
-"ambigüedad. Si hay muchas coincidencias con la subcadena se usará la última "
-"en la secuencia."
-
# type: =head1
#. type: =head1
-#: dh:117 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+#: dh:66 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
msgid "EXAMPLES"
msgstr "EJEMPLOS"
#. type: textblock
-#: dh:119
+#: dh:68
msgid ""
"To see what commands are included in a sequence, without actually doing "
"anything:"
@@ -1981,7 +1922,7 @@ msgstr ""
"realidad:"
#. type: verbatim
-#: dh:122
+#: dh:71
#, no-wrap
msgid ""
"\tdh binary-arch --no-act\n"
@@ -1991,7 +1932,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:124
+#: dh:73
msgid ""
"This is a very simple rules file, for packages where the default sequences "
"of commands work with no additional options."
@@ -2000,7 +1941,7 @@ msgstr ""
"predeterminadas de órdenes funcionan sin opciones adicionales."
#. type: verbatim
-#: dh:127 dh:134 dh:148 dh:161
+#: dh:76 dh:83 dh:97 dh:110
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2014,7 +1955,7 @@ msgstr ""
"\n"
#. type: verbatim
-#: dh:131
+#: dh:80
#, no-wrap
msgid ""
"Often you'll want to pass an option to a specific debhelper command. The\n"
@@ -2027,7 +1968,7 @@ msgstr ""
"\t\n"
#. type: verbatim
-#: dh:138
+#: dh:87
#, no-wrap
msgid ""
"\toverride_dh_strip:\n"
@@ -2039,7 +1980,7 @@ msgstr ""
"\t\t\n"
#. type: verbatim
-#: dh:141
+#: dh:90
#, no-wrap
msgid ""
"\toverride_dh_installdocs:\n"
@@ -2051,7 +1992,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:144
+#: dh:93
msgid ""
"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
"can't guess what to do for a strange package. Here's how to avoid running "
@@ -2063,7 +2004,7 @@ msgstr ""
"ejecutar sus propias órdenes."
#. type: verbatim
-#: dh:152
+#: dh:101
#, no-wrap
msgid ""
"\toverride_dh_auto_configure:\n"
@@ -2075,7 +2016,7 @@ msgstr ""
"\n"
#. type: verbatim
-#: dh:155
+#: dh:104
#, no-wrap
msgid ""
"\toverride_dh_auto_build:\n"
@@ -2087,7 +2028,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:158
+#: dh:107
msgid ""
"Another common case is wanting to do something manually before or after a "
"particular debhelper command is run."
@@ -2096,7 +2037,7 @@ msgstr ""
"se ejecute una orden en particular de debhelper."
#. type: verbatim
-#: dh:165
+#: dh:114
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
@@ -2110,7 +2051,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:169
+#: dh:118
msgid ""
"Python tools are not run by dh by default, due to the continual change in "
"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
@@ -2118,7 +2059,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:173
+#: dh:122
#, fuzzy, no-wrap
#| msgid ""
#| "\t#!/usr/bin/make -f\n"
@@ -2137,7 +2078,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:177
+#: dh:126
msgid ""
"If your package uses autotools and you want to freshen F<config.sub> and "
"F<config.guess> with newer versions from the B<autotools-dev> package at "
@@ -2150,7 +2091,7 @@ msgstr ""
"que automatizan esto, como puede ver a continuación."
#. type: verbatim
-#: dh:182
+#: dh:131
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2164,7 +2105,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:186
+#: dh:135
msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
@@ -2174,7 +2115,7 @@ msgstr ""
"detecta erróneamente que el paquete usa MakeMaker."
#. type: verbatim
-#: dh:190
+#: dh:139
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2187,34 +2128,8 @@ msgstr ""
"\t\tdh $@ --buildsystem=perl_build\n"
"\n"
-#. type: verbatim
-#: dh:194
-#, no-wrap
-msgid ""
-"To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
-"sequence addons like this:\n"
-"\t\n"
-msgstr ""
-"Para parchear su paquete mediante quilt, puede indicar a B<dh> que\n"
-"use las extensiones de secuencia de quilt para B<dh>, como puede ver:\n"
-"\t\n"
-
-#. type: verbatim
-#: dh:197
-#, no-wrap
-msgid ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@ --with quilt\n"
-"\n"
-msgstr ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@ --with quilt\n"
-"\n"
-
#. type: textblock
-#: dh:201
+#: dh:143
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
@@ -2225,7 +2140,7 @@ msgstr ""
"en el que las fuentes se ubican en un subdirectorio."
#. type: verbatim
-#: dh:205
+#: dh:147
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2239,7 +2154,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:209
+#: dh:151
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
@@ -2249,7 +2164,7 @@ msgstr ""
"B<clean>."
#. type: verbatim
-#: dh:212
+#: dh:154
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2263,7 +2178,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:216
+#: dh:158
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
@@ -2273,7 +2188,7 @@ msgstr ""
"j> funcionará."
#. type: verbatim
-#: dh:219
+#: dh:161
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2287,7 +2202,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:223
+#: dh:165
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
@@ -2297,7 +2212,7 @@ msgstr ""
"cada orden."
#. type: verbatim
-#: dh:226 dh:237 dh:254
+#: dh:168 dh:179 dh:196
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2311,7 +2226,7 @@ msgstr ""
"\t\n"
#. type: verbatim
-#: dh:230
+#: dh:172
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
@@ -2323,7 +2238,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:233
+#: dh:175
msgid ""
"Sometimes, you may need to make an override target only run commands when a "
"particular package is being built. This can be accomplished using "
@@ -2335,7 +2250,7 @@ msgstr ""
"ejemplo:"
#. type: verbatim
-#: dh:241
+#: dh:183
#, fuzzy, no-wrap
#| msgid ""
#| "\toverride_dh_fixperms:\n"
@@ -2360,7 +2275,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:247
+#: dh:189
#, fuzzy
#| msgid ""
#| "Finally, remember that you are not limited to using override targets in "
@@ -2387,7 +2302,7 @@ msgstr ""
"demonios de construcción generen la documentación de forma innecesaria."
#. type: verbatim
-#: dh:258
+#: dh:200
#, fuzzy, no-wrap
#| msgid ""
#| "\tbuild: build-arch build-indep ;\n"
@@ -2411,7 +2326,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:263
+#: dh:205
msgid ""
"Note that in the example above, dh will arrange for \"debian/rules build\" "
"to call your build-indep and build-arch targets. You do not need to "
@@ -2421,12 +2336,12 @@ msgid ""
msgstr ""
#. type: =head1
-#: dh:269
+#: dh:211
msgid "INTERNALS"
msgstr "FUNCIONAMIENTO INTERNO"
#. type: textblock
-#: dh:271
+#: dh:213
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
@@ -2435,7 +2350,7 @@ msgstr ""
"puede ver como funciona por dentro."
#. type: textblock
-#: dh:273
+#: dh:215
msgid ""
"Each debhelper command will record when it's successfully run in F<debian/"
"package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can tell which "
@@ -2448,7 +2363,7 @@ msgstr ""
"esas órdenes otra vez."
#. type: textblock
-#: dh:278
+#: dh:220
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
@@ -2461,14 +2376,14 @@ msgstr ""
"before>, B<--after> y B<--remaining> pueden anular este comportamiento."
#. type: textblock
-#: dh:283
+#: dh:225
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
msgstr ""
#. type: textblock
-#: dh:286
+#: dh:228
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
@@ -2480,16 +2395,95 @@ msgstr ""
"«override». El contenido (e incluso, la existencia) de esta variable de "
"entorno, como el nombre sugiere, está sujeto a cambios en cualquier momento."
+#. type: =head1
+#: dh:233
+msgid "DEPRECATED OPTIONS"
+msgstr ""
+
+#. type: textblock
+#: dh:235
+msgid ""
+"The following options are deprecated. It's much better to use override "
+"targets instead."
+msgstr ""
+
+# type: =item
+#. type: =item
+#: dh:240
+msgid "B<--until> I<cmd>"
+msgstr "B<--until> I<orden>"
+
+#. type: textblock
+#: dh:242
+#, fuzzy
+#| msgid "Run commands in the sequence until and including I<cmd>, then stop."
+msgid "Run commands in the sequence until and including I<cmd>, then stop."
+msgstr ""
+"Ejecuta las órdenes en la secuencia hasta la I<orden>, inclusive, y cierra."
+
+# type: =item
+#. type: =item
+#: dh:244
+msgid "B<--before> I<cmd>"
+msgstr "B<--before> I<orden>"
+
+#. type: textblock
+#: dh:246
+#, fuzzy
+#| msgid "Run commands in the sequence before I<cmd>, then stop."
+msgid "Run commands in the sequence before I<cmd>, then stop."
+msgstr "Ejecuta las órdenes en la secuencia anteriores a I<orden>, y cierra."
+
+# type: =item
+#. type: =item
+#: dh:248
+msgid "B<--after> I<cmd>"
+msgstr "B<--after> I<orden>"
+
+#. type: textblock
+#: dh:250
+#, fuzzy
+#| msgid "Run commands in the sequence that come after I<cmd>."
+msgid "Run commands in the sequence that come after I<cmd>."
+msgstr "Ejecuta las órdenes en la secuencia posteriores a I<orden>."
+
+# type: =item
+#. type: =item
+#: dh:252
+msgid "B<--remaining>"
+msgstr "B<--remaining>"
+
+#. type: textblock
+#: dh:254
+#, fuzzy
+#| msgid "Run all commands in the sequence that have yet to be run."
+msgid "Run all commands in the sequence that have yet to be run."
+msgstr "Ejecuta todas las órdenes en la secuencia que aún no se han ejecutado."
+
+#. type: textblock
+#: dh:258
+msgid ""
+"In the above options, I<cmd> can be a full name of a debhelper command, or a "
+"substring. It'll first search for a command in the sequence exactly matching "
+"the name, to avoid any ambiguity. If there are multiple substring matches, "
+"the last one in the sequence will be used."
+msgstr ""
+"En las opciones anteriores, I<orden> puede ser el nombre completo de una "
+"orden de debhelper, o una subcadena. Buscará en primer lugar una orden en la "
+"secuencia que coincide totalmente con el nombre, para evitar cualquier "
+"ambigüedad. Si hay muchas coincidencias con la subcadena se usará la última "
+"en la secuencia."
+
# type: textblock
#. type: textblock
-#: dh:868 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
-#: dh_auto_install:87 dh_auto_test:60 dh_builddeb:125 dh_clean:144
+#: dh:860 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
+#: dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144
#: dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84
#: dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173
#: dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88
#: dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108
#: dh_installifupdown:71 dh_installinfo:79 dh_installinit:277
-#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:260
+#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:261
#: dh_installmanpages:199 dh_installmime:97 dh_installmodules:126
#: dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110
#: dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260
@@ -2501,14 +2495,14 @@ msgstr "L<debhelper(7)>"
# type: textblock
#. type: textblock
-#: dh:870 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
-#: dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:127
+#: dh:862 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
+#: dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124
#: dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103
#: dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175
#: dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90
#: dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110
#: dh_installifupdown:73 dh_installinfo:81 dh_installinit:279
-#: dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201
+#: dh_installlogrotate:54 dh_installman:263 dh_installmanpages:201
#: dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63
#: dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91
#: dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262
@@ -2563,7 +2557,7 @@ msgstr ""
#. type: textblock
#: dh_auto_build:30 dh_auto_clean:32 dh_auto_configure:33 dh_auto_install:45
-#: dh_auto_test:32
+#: dh_auto_test:33
msgid ""
"See L<debhelper(7)/B<BUILD SYSTEM OPTIONS>> for a list of common build "
"system selection and control options."
@@ -2574,7 +2568,7 @@ msgstr ""
# type: =item
#. type: =item
#: dh_auto_build:35 dh_auto_clean:37 dh_auto_configure:38 dh_auto_install:56
-#: dh_auto_test:37 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69
+#: dh_auto_test:38 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69
#: dh_installinit:99 dh_makeshlibs:91 dh_shlibdeps:37
msgid "B<--> I<params>"
msgstr "B<--> I<parámetros>"
@@ -2821,7 +2815,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh_auto_test:14
+#: dh_auto_test:15
msgid ""
"B<dh_auto_test> [S<I<build system options>>] [S<I<debhelper options>>] "
"[S<B<--> I<params>>]"
@@ -2830,7 +2824,7 @@ msgstr ""
"debhelper>>] [S<B<--> I<parámetros>>]"
#. type: textblock
-#: dh_auto_test:18
+#: dh_auto_test:19
msgid ""
"B<dh_auto_test> is a debhelper program that tries to automatically run a "
"package's test suite. It does so by running the appropriate command for the "
@@ -2850,7 +2844,7 @@ msgstr ""
"cero sin hacer nada."
#. type: textblock
-#: dh_auto_test:26
+#: dh_auto_test:27
msgid ""
"This is intended to work for about 90% of packages with a test suite. If it "
"doesn't work, you're encouraged to skip using B<dh_auto_test> at all, and "
@@ -2861,7 +2855,7 @@ msgstr ""
"simplemente ejecute el conjunto de pruebas manualmente."
#. type: textblock
-#: dh_auto_test:39
+#: dh_auto_test:40
msgid ""
"Pass I<params> to the program that is run. These can be used to supplement "
"or override the any standard parameters that B<dh_auto_test> passes."
@@ -2871,7 +2865,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh_auto_test:46
+#: dh_auto_test:47
msgid ""
"If the B<DEB_BUILD_OPTIONS> environment variable contains B<nocheck>, no "
"tests will be performed."
@@ -4333,7 +4327,7 @@ msgstr ""
# type: =item
#. type: =item
#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104
-#: dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52
+#: dh_installlogcheck:44 dh_installlogrotate:26 dh_installmodules:52
#: dh_installpam:35 dh_installppp:39 dh_installudev:39
msgid "B<--name=>I<name>"
msgstr "B<--name=>I<nombre>"
@@ -5636,7 +5630,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh_installlogcheck:48
+#: dh_installlogcheck:46
#, fuzzy
#| msgid ""
#| "Look for files named F<debian/package.name.logrotate> and install them as "
@@ -8310,6 +8304,26 @@ msgstr "Normas de Debian, versión 2.2"
msgid "Andrew Stribblehill <ads@debian.org>"
msgstr "Andrew Stribblehill <ads@debian.org>"
+#~ msgid ""
+#~ "To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
+#~ "sequence addons like this:\n"
+#~ "\t\n"
+#~ msgstr ""
+#~ "Para parchear su paquete mediante quilt, puede indicar a B<dh> que\n"
+#~ "use las extensiones de secuencia de quilt para B<dh>, como puede ver:\n"
+#~ "\t\n"
+
+#~ msgid ""
+#~ "\t#!/usr/bin/make -f\n"
+#~ "\t%:\n"
+#~ "\t\tdh $@ --with quilt\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\t#!/usr/bin/make -f\n"
+#~ "\t%:\n"
+#~ "\t\tdh $@ --with quilt\n"
+#~ "\n"
+
# type: =head2
#~ msgid "Debhelper compatibility levels"
#~ msgstr "Niveles de compatibilidad de debhelper"
diff --git a/man/po4a/po/fr.po b/man/po4a/po/fr.po
index 7073bf9..6281854 100644
--- a/man/po4a/po/fr.po
+++ b/man/po4a/po/fr.po
@@ -3,7 +3,7 @@
msgid ""
msgstr ""
"Project-Id-Version: debhelper manpages\n"
-"POT-Creation-Date: 2011-08-23 15:26-0400\n"
+"POT-Creation-Date: 2011-09-10 18:35-0400\n"
"PO-Revision-Date: 2011-04-03 17:37+0200\n"
"Last-Translator: Valery Perrin <valery.perrin.debian@free.fr>\n"
"Language-Team: Français <debian-l10n-french@lists.debian.org>\n"
@@ -42,7 +42,7 @@ msgstr "debhelper - ensemble d'outils regroupés sous le nom de debhelper"
# type: =head1
#. type: =head1
#: debhelper.pod:5 dh:12 dh_auto_build:12 dh_auto_clean:13
-#: dh_auto_configure:12 dh_auto_install:15 dh_auto_test:12 dh_bugfiles:12
+#: dh_auto_configure:12 dh_auto_install:15 dh_auto_test:13 dh_bugfiles:12
#: dh_builddeb:12 dh_clean:12 dh_compress:13 dh_desktop:12 dh_fixperms:12
#: dh_gconf:12 dh_gencontrol:12 dh_icons:13 dh_install:13
#: dh_installcatalogs:14 dh_installchangelogs:12 dh_installcron:12
@@ -72,7 +72,7 @@ msgstr ""
# type: =head1
#. type: =head1
#: debhelper.pod:9 dh:16 dh_auto_build:16 dh_auto_clean:17
-#: dh_auto_configure:16 dh_auto_install:19 dh_auto_test:16 dh_bugfiles:16
+#: dh_auto_configure:16 dh_auto_install:19 dh_auto_test:17 dh_bugfiles:16
#: dh_builddeb:16 dh_clean:16 dh_compress:17 dh_desktop:16 dh_fixperms:16
#: dh_gconf:16 dh_gencontrol:16 dh_icons:17 dh_install:17
#: dh_installcatalogs:18 dh_installchangelogs:16 dh_installcron:16
@@ -334,7 +334,7 @@ msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:101 dh:76
+#: debhelper.pod:101 dh:56
msgid "B<--no-act>"
msgstr "B<--no-act>"
@@ -895,7 +895,7 @@ msgstr "Ce mode fonctionne comme v2 mais avec les ajouts suivants :"
#: debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:407
#: debhelper.pod:414 debhelper.pod:418 debhelper.pod:422 debhelper.pod:437
#: debhelper.pod:441 debhelper.pod:449 debhelper.pod:454 debhelper.pod:468
-#: debhelper.pod:473 debhelper.pod:479 debhelper.pod:484 debhelper.pod:488
+#: debhelper.pod:473 debhelper.pod:480 debhelper.pod:485 debhelper.pod:489
msgid "-"
msgstr "-"
@@ -1222,25 +1222,26 @@ msgstr ""
#. type: textblock
#: debhelper.pod:475
msgid ""
-"dh allows defining custom build, build-arch, and build-indep targets in "
-"debian/rules, without needing to manually define the other targets that "
-"depend on them."
+"dh is aware of the usual dependencies between targets in debian/rules. So, "
+"\"dh binary\" will run any build, build-arch, build-indep, install, etc "
+"targets that exist in the rules file. There's no need to define an explicit "
+"binary target with explicit dependencies on the other targets."
msgstr ""
#. type: textblock
-#: debhelper.pod:481
+#: debhelper.pod:482
msgid ""
"B<dh_auto_configure> does not include the source package name in --"
"libexecdir when using autoconf."
msgstr ""
#. type: textblock
-#: debhelper.pod:486
+#: debhelper.pod:487
msgid "B<dh> does not default to enabling --with=python-support"
msgstr ""
#. type: textblock
-#: debhelper.pod:490
+#: debhelper.pod:491
msgid ""
"All of the B<dh_auto_>I<*> debhelper programs and B<dh> set environment "
"variables listed by B<dpkg-buildflags>, unless they are already set. They "
@@ -1249,7 +1250,7 @@ msgstr ""
# type: =head1
#. type: =head1
-#: debhelper.pod:498 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116
+#: debhelper.pod:499 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116
#: dh_installemacsen:67 dh_installexamples:53 dh_installinit:133
#: dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55
#: dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68
@@ -1259,13 +1260,13 @@ msgstr "REMARQUES"
# type: =head2
#. type: =head2
-#: debhelper.pod:500
+#: debhelper.pod:501
msgid "Multiple binary package support"
msgstr "Prise en charge de plusieurs paquets binaires"
# type: textblock
#. type: textblock
-#: debhelper.pod:502
+#: debhelper.pod:503
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
@@ -1285,7 +1286,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:510
+#: debhelper.pod:511
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
@@ -1301,13 +1302,13 @@ msgstr ""
# type: =head2
#. type: =head2
-#: debhelper.pod:516
+#: debhelper.pod:517
msgid "Automatic generation of Debian install scripts"
msgstr "Génération automatique des scripts Debian de maintenance du paquet"
# type: textblock
#. type: textblock
-#: debhelper.pod:518
+#: debhelper.pod:519
msgid ""
"Some debhelper commands will automatically generate parts of Debian "
"maintainer scripts. If you want these automatically generated things "
@@ -1325,7 +1326,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:525
+#: debhelper.pod:526
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
@@ -1335,7 +1336,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:528
+#: debhelper.pod:529
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
@@ -1346,7 +1347,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:531
+#: debhelper.pod:532
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a Perl script. If you would like to embed it into a Perl script, here "
@@ -1361,7 +1362,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: debhelper.pod:536
+#: debhelper.pod:537
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
@@ -1380,13 +1381,13 @@ msgstr ""
# type: =head2
#. type: =head2
-#: debhelper.pod:542
+#: debhelper.pod:543
msgid "Automatic generation of miscellaneous dependencies."
msgstr "Génération automatique des diverses dépendances."
# type: textblock
#. type: textblock
-#: debhelper.pod:544
+#: debhelper.pod:545
#, fuzzy
#| msgid ""
#| "Some debhelper commands may make the generated package need to depend on "
@@ -1415,7 +1416,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:552
+#: debhelper.pod:553
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called B<"
@@ -1430,7 +1431,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:557
+#: debhelper.pod:558
msgid ""
"This is entirely independent of the standard B<${shlibs:Depends}> generated "
"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by L<dh_perl(1)"
@@ -1444,13 +1445,13 @@ msgstr ""
# type: =head2
#. type: =head2
-#: debhelper.pod:562
+#: debhelper.pod:563
msgid "Package build directories"
msgstr "Répertoires de construction du paquet"
# type: textblock
#. type: textblock
-#: debhelper.pod:564
+#: debhelper.pod:565
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/I<package>."
@@ -1461,7 +1462,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:567
+#: debhelper.pod:568
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the B<-P> flag. For example, \"B<dh_installdocs -Pdebian/tmp>"
@@ -1481,13 +1482,13 @@ msgstr ""
# type: =head2
#. type: =head2
-#: debhelper.pod:575
+#: debhelper.pod:576
msgid "udebs"
msgstr "udebs"
# type: textblock
#. type: textblock
-#: debhelper.pod:577
+#: debhelper.pod:578
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>, and "
@@ -1506,13 +1507,13 @@ msgstr ""
"F<config>, etc."
#. type: =head2
-#: debhelper.pod:584
+#: debhelper.pod:585
msgid "Build depends"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:586
+#: debhelper.pod:587
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in F<debian/control>. You should build-depend on a "
@@ -1528,7 +1529,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: debhelper.pod:592
+#: debhelper.pod:593
#, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
@@ -1539,19 +1540,19 @@ msgstr ""
# type: =head1
#. type: =head1
-#: debhelper.pod:594
+#: debhelper.pod:595
msgid "ENVIRONMENT"
msgstr "VARIABLES D'ENVIRONNEMENT"
# type: =item
#. type: =item
-#: debhelper.pod:598
+#: debhelper.pod:599
msgid "B<DH_VERBOSE>"
msgstr "B<DH_VERBOSE>"
# type: textblock
#. type: textblock
-#: debhelper.pod:600
+#: debhelper.pod:601
msgid ""
"Set to B<1> to enable verbose mode. Debhelper will output every command it "
"runs that modifies files on the build system."
@@ -1561,13 +1562,13 @@ msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:603
+#: debhelper.pod:604
msgid "B<DH_COMPAT>"
msgstr "B<DH_COMPAT>"
# type: textblock
#. type: textblock
-#: debhelper.pod:605
+#: debhelper.pod:606
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in F<debian/compat>."
@@ -1577,25 +1578,25 @@ msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:608
+#: debhelper.pod:609
msgid "B<DH_NO_ACT>"
msgstr "B<DH_NO_ACT>"
# type: textblock
#. type: textblock
-#: debhelper.pod:610
+#: debhelper.pod:611
msgid "Set to B<1> to enable no-act mode."
msgstr "Mettre cette variable à B<1> pour activer le mode simulation (no-act)."
# type: =item
#. type: =item
-#: debhelper.pod:612
+#: debhelper.pod:613
msgid "B<DH_OPTIONS>"
msgstr "B<DH_OPTIONS>"
# type: textblock
#. type: textblock
-#: debhelper.pod:614
+#: debhelper.pod:615
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands. Command-specific options will be ignored by commands "
@@ -1607,7 +1608,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:618
+#: debhelper.pod:619
msgid ""
"This is useful in some situations, for example, if you need to pass B<-p> to "
"all debhelper commands that will be run. One good way to set B<DH_OPTIONS> "
@@ -1622,13 +1623,13 @@ msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:623
+#: debhelper.pod:624
msgid "B<DH_ALWAYS_EXCLUDE>"
msgstr "B<DH_ALWAYS_EXCLUDE>"
# type: textblock
#. type: textblock
-#: debhelper.pod:625
+#: debhelper.pod:626
msgid ""
"If set, this adds the value the variable is set to to the B<-X> options of "
"all commands that support the B<-X> option. Moreover, B<dh_builddeb> will "
@@ -1641,7 +1642,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:629
+#: debhelper.pod:630
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories from "
@@ -1660,7 +1661,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:636
+#: debhelper.pod:637
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"B<DH_ALWAYS_EXCLUDE=CVS:.svn>"
@@ -1670,15 +1671,15 @@ msgstr ""
# type: =head1
#. type: =head1
-#: debhelper.pod:641 dh:866 dh_auto_build:47 dh_auto_clean:50
-#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122
-#: dh_builddeb:123 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129
+#: debhelper.pod:642 dh:858 dh_auto_build:47 dh_auto_clean:50
+#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122
+#: dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129
#: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279
#: dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77
#: dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86
#: dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106
#: dh_installifupdown:69 dh_installinfo:77 dh_installinit:275
-#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:258
+#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:259
#: dh_installmanpages:197 dh_installmenu:87 dh_installmime:95
#: dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115
#: dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57
@@ -1691,40 +1692,40 @@ msgstr "VOIR AUSSI"
# type: =item
#. type: =item
-#: debhelper.pod:645
+#: debhelper.pod:646
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr "F</usr/share/doc/debhelper/examples/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:647
+#: debhelper.pod:648
msgid "A set of example F<debian/rules> files that use debhelper."
msgstr ""
"Un ensemble d'exemples de fichiers F<debian/rules> qui utilisent debhelper."
# type: =item
#. type: =item
-#: debhelper.pod:649
+#: debhelper.pod:650
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr "L<http://kitenet.net/~joey/code/debhelper/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:651
+#: debhelper.pod:652
msgid "Debhelper web site."
msgstr "Le site internet de debhelper."
# type: =head1
#. type: =head1
-#: debhelper.pod:655 dh:872 dh_auto_build:53 dh_auto_clean:56
-#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130
-#: dh_builddeb:129 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135
+#: debhelper.pod:656 dh:864 dh_auto_build:53 dh_auto_clean:56
+#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130
+#: dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135
#: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285
#: dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83
#: dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92
#: dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112
#: dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82
-#: dh_installlogrotate:56 dh_installman:264 dh_installmanpages:203
+#: dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203
#: dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65
#: dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93
#: dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264
@@ -1736,14 +1737,14 @@ msgstr "AUTEUR"
# type: textblock
#. type: textblock
-#: debhelper.pod:657 dh:874 dh_auto_build:55 dh_auto_clean:58
-#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:131
+#: debhelper.pod:658 dh:866 dh_auto_build:55 dh_auto_clean:58
+#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128
#: dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90
#: dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152
#: dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315
#: dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77
#: dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58
-#: dh_installman:266 dh_installmanpages:205 dh_installmenu:97
+#: dh_installman:267 dh_installmanpages:205 dh_installmenu:97
#: dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73
#: dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234
#: dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178
@@ -1761,9 +1762,13 @@ msgstr "dh - automate de commandes debhelper"
# type: textblock
#. type: textblock
#: dh:14
+#, fuzzy
+#| msgid ""
+#| "B<dh> I<sequence> [B<--with> I<addon>[B<,>I<addon> ...]] [B<--list>] [B<--"
+#| "until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] [B<--remaining>] "
+#| "[S<I<debhelper options>>]"
msgid ""
-"B<dh> I<sequence> [B<--with> I<addon>[B<,>I<addon> ...]] [B<--list>] [B<--"
-"until> I<cmd>] [B<--before> I<cmd>] [B<--after> I<cmd>] [B<--remaining>] "
+"B<dh> I<sequence> [B<--with> I<addon>[B<,>I<addon> ...]] [B<--list>] "
"[S<I<debhelper options>>]"
msgstr ""
"B<dh> I<sequence> [B<--with> I<rajout>[B<,>I<rajout> ...]] [B<--list>] [B<--"
@@ -1822,12 +1827,12 @@ msgstr ""
# type: =head1
#. type: =head1
#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31
-#: dh_auto_install:43 dh_auto_test:30 dh_bugfiles:50 dh_builddeb:21
+#: dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21
#: dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26
#: dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56
#: dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66
#: dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39
-#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42
+#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:40
#: dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40
#: dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31
#: dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51
@@ -1879,73 +1884,8 @@ msgstr ""
msgid "List all available addons."
msgstr "Liste tous les rajouts disponibles."
-# type: =item
-#. type: =item
-#: dh:56
-msgid "B<--until> I<cmd>"
-msgstr "B<--until> I<commande>"
-
-# type: textblock
#. type: textblock
#: dh:58
-#, fuzzy
-#| msgid "Run commands in the sequence until and including I<cmd>, then stop."
-msgid ""
-"Run commands in the sequence until and including I<cmd>, then stop. "
-"(Deprecated)"
-msgstr ""
-"Exécute les commandes de la séquence jusqu'à la I<commande> spécifiée, "
-"l'exécute puis s'arrête."
-
-# type: =item
-#. type: =item
-#: dh:61
-msgid "B<--before> I<cmd>"
-msgstr "B<--before> I<commande>"
-
-# type: textblock
-#. type: textblock
-#: dh:63
-#, fuzzy
-#| msgid "Run commands in the sequence before I<cmd>, then stop."
-msgid "Run commands in the sequence before I<cmd>, then stop. (Deprecated)"
-msgstr ""
-"Exécute les commandes de la séquence situées avant la I<commande> spécifiée "
-"puis s'arrête."
-
-# type: =item
-#. type: =item
-#: dh:66
-msgid "B<--after> I<cmd>"
-msgstr "B<--after> I<commande>"
-
-# type: textblock
-#. type: textblock
-#: dh:68
-#, fuzzy
-#| msgid "Run commands in the sequence that come after I<cmd>."
-msgid "Run commands in the sequence that come after I<cmd>. (Deprecated)"
-msgstr ""
-"Exécute les commandes de la séquence situées après la I<commande> spécifiée."
-
-# type: =item
-#. type: =item
-#: dh:71
-msgid "B<--remaining>"
-msgstr "B<--remaining>"
-
-# type: textblock
-#. type: textblock
-#: dh:73
-#, fuzzy
-#| msgid "Run all commands in the sequence that have yet to be run."
-msgid "Run all commands in the sequence that have yet to be run. (Deprecated)"
-msgstr ""
-"Exécute toutes les commandes de la séquence qui n'ont pas encore été "
-"exécutées."
-
-#. type: textblock
-#: dh:78
msgid ""
"Prints commands that would run for a given sequence, but does not run them."
msgstr ""
@@ -1954,40 +1894,30 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh:82
+#: dh:62
+#, fuzzy
+#| msgid ""
+#| "All other options passed to B<dh> are passed on to each command it runs. "
+#| "This can be used to set an option like B<-v> or B<-X> or B<-N>, as well "
+#| "as for more specialised options."
msgid ""
-"All other options passed to B<dh> are passed on to each command it runs. "
-"This can be used to set an option like B<-v> or B<-X> or B<-N>, as well as "
-"for more specialised options."
+"Other options passed to B<dh> are passed on to each command it runs. This "
+"can be used to set an option like B<-v> or B<-X> or B<-N>, as well as for "
+"more specialised options."
msgstr ""
"Toute autre option fournie à B<dh> est passée en paramètre à chaque commande "
"exécutée. Cela est utile tant pour les options comme B<-v>, B<-X> ou B<-N> "
"que pour des options plus spécialisées. "
-# type: textblock
-#. type: textblock
-#: dh:86
-msgid ""
-"In the above options, I<cmd> can be a full name of a debhelper command, or a "
-"substring. It'll first search for a command in the sequence exactly matching "
-"the name, to avoid any ambiguity. If there are multiple substring matches, "
-"the last one in the sequence will be used."
-msgstr ""
-"Dans les options ci-dessus, I<commande> peut être soit le nom complet de la "
-"commande debhelper, soit une sous-chaîne de ce nom. dh cherchera d'abord, "
-"dans la séquence, une commande portant le nom exact pour éviter toute "
-"ambiguïté. Si plusieurs commandes correspondent à la sous-chaîne la dernière "
-"de la séquence sera prise en compte."
-
# type: =head1
#. type: =head1
-#: dh:117 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+#: dh:66 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
msgid "EXAMPLES"
msgstr "EXEMPLES"
# type: textblock
#. type: textblock
-#: dh:119
+#: dh:68
msgid ""
"To see what commands are included in a sequence, without actually doing "
"anything:"
@@ -1997,7 +1927,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:122
+#: dh:71
#, no-wrap
msgid ""
"\tdh binary-arch --no-act\n"
@@ -2008,7 +1938,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh:124
+#: dh:73
msgid ""
"This is a very simple rules file, for packages where the default sequences "
"of commands work with no additional options."
@@ -2018,7 +1948,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:127 dh:134 dh:148 dh:161
+#: dh:76 dh:83 dh:97 dh:110
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2033,7 +1963,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:131
+#: dh:80
#, no-wrap
msgid ""
"Often you'll want to pass an option to a specific debhelper command. The\n"
@@ -2046,7 +1976,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:138
+#: dh:87
#, no-wrap
msgid ""
"\toverride_dh_strip:\n"
@@ -2059,7 +1989,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:141
+#: dh:90
#, no-wrap
msgid ""
"\toverride_dh_installdocs:\n"
@@ -2072,7 +2002,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh:144
+#: dh:93
msgid ""
"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
"can't guess what to do for a strange package. Here's how to avoid running "
@@ -2085,7 +2015,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:152
+#: dh:101
#, no-wrap
msgid ""
"\toverride_dh_auto_configure:\n"
@@ -2098,7 +2028,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:155
+#: dh:104
#, no-wrap
msgid ""
"\toverride_dh_auto_build:\n"
@@ -2111,7 +2041,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh:158
+#: dh:107
msgid ""
"Another common case is wanting to do something manually before or after a "
"particular debhelper command is run."
@@ -2121,7 +2051,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:165
+#: dh:114
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
@@ -2135,7 +2065,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:169
+#: dh:118
msgid ""
"Python tools are not run by dh by default, due to the continual change in "
"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
@@ -2144,7 +2074,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:173
+#: dh:122
#, fuzzy, no-wrap
#| msgid ""
#| "\t#!/usr/bin/make -f\n"
@@ -2163,7 +2093,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:177
+#: dh:126
msgid ""
"If your package uses autotools and you want to freshen F<config.sub> and "
"F<config.guess> with newer versions from the B<autotools-dev> package at "
@@ -2178,7 +2108,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:182
+#: dh:131
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2193,7 +2123,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh:186
+#: dh:135
msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
@@ -2204,7 +2134,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:190
+#: dh:139
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2217,37 +2147,9 @@ msgstr ""
"\t\tdh --buildsystem=perl_build $@\n"
"\n"
-# type: verbatim
-#. type: verbatim
-#: dh:194
-#, no-wrap
-msgid ""
-"To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
-"sequence addons like this:\n"
-"\t\n"
-msgstr ""
-"Pour patcher un paquet en utilisant « quilt », il faut demander à B<dh>\n"
-"d'utiliser la séquence B<dh> propre à « quilt ». Voici comment faire :\n"
-"\t\n"
-
-# type: verbatim
-#. type: verbatim
-#: dh:197
-#, no-wrap
-msgid ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@ --with quilt\n"
-"\n"
-msgstr ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@ --with quilt\n"
-"\n"
-
# type: textblock
#. type: textblock
-#: dh:201
+#: dh:143
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
@@ -2258,7 +2160,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:205
+#: dh:147
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2272,7 +2174,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:209
+#: dh:151
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
@@ -2283,7 +2185,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:212
+#: dh:154
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2297,7 +2199,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:216
+#: dh:158
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
@@ -2307,7 +2209,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:219
+#: dh:161
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2321,7 +2223,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:223
+#: dh:165
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
@@ -2332,7 +2234,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:226 dh:237 dh:254
+#: dh:168 dh:179 dh:196
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -2346,7 +2248,7 @@ msgstr ""
"\t\n"
#. type: verbatim
-#: dh:230
+#: dh:172
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
@@ -2358,7 +2260,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:233
+#: dh:175
msgid ""
"Sometimes, you may need to make an override target only run commands when a "
"particular package is being built. This can be accomplished using "
@@ -2371,7 +2273,7 @@ msgstr ""
# type: verbatim
#. type: verbatim
-#: dh:241
+#: dh:183
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
@@ -2389,7 +2291,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:247
+#: dh:189
#, fuzzy
#| msgid ""
#| "Finally, remember that you are not limited to using override targets in "
@@ -2417,7 +2319,7 @@ msgstr ""
"cette génération soit refaite pour chacune des architectures."
#. type: verbatim
-#: dh:258
+#: dh:200
#, fuzzy, no-wrap
#| msgid ""
#| "\tbuild: build-arch build-indep ;\n"
@@ -2441,7 +2343,7 @@ msgstr ""
"\n"
#. type: textblock
-#: dh:263
+#: dh:205
msgid ""
"Note that in the example above, dh will arrange for \"debian/rules build\" "
"to call your build-indep and build-arch targets. You do not need to "
@@ -2451,12 +2353,12 @@ msgid ""
msgstr ""
#. type: =head1
-#: dh:269
+#: dh:211
msgid "INTERNALS"
msgstr "FONCTIONNEMENT INTERNE"
#. type: textblock
-#: dh:271
+#: dh:213
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
@@ -2466,7 +2368,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh:273
+#: dh:215
msgid ""
"Each debhelper command will record when it's successfully run in F<debian/"
"package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can tell which "
@@ -2481,7 +2383,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh:278
+#: dh:220
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
@@ -2494,14 +2396,14 @@ msgstr ""
"B<--after> et B<--remaining> permettent de modifier ce comportement."
#. type: textblock
-#: dh:283
+#: dh:225
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
msgstr ""
#. type: textblock
-#: dh:286
+#: dh:228
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
@@ -2514,16 +2416,106 @@ msgstr ""
"d'environnement, comme son nom l'indique, est sujet à des modifications "
"permanentes."
+#. type: =head1
+#: dh:233
+msgid "DEPRECATED OPTIONS"
+msgstr ""
+
+#. type: textblock
+#: dh:235
+msgid ""
+"The following options are deprecated. It's much better to use override "
+"targets instead."
+msgstr ""
+
+# type: =item
+#. type: =item
+#: dh:240
+msgid "B<--until> I<cmd>"
+msgstr "B<--until> I<commande>"
+
+# type: textblock
+#. type: textblock
+#: dh:242
+#, fuzzy
+#| msgid "Run commands in the sequence until and including I<cmd>, then stop."
+msgid "Run commands in the sequence until and including I<cmd>, then stop."
+msgstr ""
+"Exécute les commandes de la séquence jusqu'à la I<commande> spécifiée, "
+"l'exécute puis s'arrête."
+
+# type: =item
+#. type: =item
+#: dh:244
+msgid "B<--before> I<cmd>"
+msgstr "B<--before> I<commande>"
+
# type: textblock
#. type: textblock
-#: dh:868 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
-#: dh_auto_install:87 dh_auto_test:60 dh_builddeb:125 dh_clean:144
+#: dh:246
+#, fuzzy
+#| msgid "Run commands in the sequence before I<cmd>, then stop."
+msgid "Run commands in the sequence before I<cmd>, then stop."
+msgstr ""
+"Exécute les commandes de la séquence situées avant la I<commande> spécifiée "
+"puis s'arrête."
+
+# type: =item
+#. type: =item
+#: dh:248
+msgid "B<--after> I<cmd>"
+msgstr "B<--after> I<commande>"
+
+# type: textblock
+#. type: textblock
+#: dh:250
+#, fuzzy
+#| msgid "Run commands in the sequence that come after I<cmd>."
+msgid "Run commands in the sequence that come after I<cmd>."
+msgstr ""
+"Exécute les commandes de la séquence situées après la I<commande> spécifiée."
+
+# type: =item
+#. type: =item
+#: dh:252
+msgid "B<--remaining>"
+msgstr "B<--remaining>"
+
+# type: textblock
+#. type: textblock
+#: dh:254
+#, fuzzy
+#| msgid "Run all commands in the sequence that have yet to be run."
+msgid "Run all commands in the sequence that have yet to be run."
+msgstr ""
+"Exécute toutes les commandes de la séquence qui n'ont pas encore été "
+"exécutées."
+
+# type: textblock
+#. type: textblock
+#: dh:258
+msgid ""
+"In the above options, I<cmd> can be a full name of a debhelper command, or a "
+"substring. It'll first search for a command in the sequence exactly matching "
+"the name, to avoid any ambiguity. If there are multiple substring matches, "
+"the last one in the sequence will be used."
+msgstr ""
+"Dans les options ci-dessus, I<commande> peut être soit le nom complet de la "
+"commande debhelper, soit une sous-chaîne de ce nom. dh cherchera d'abord, "
+"dans la séquence, une commande portant le nom exact pour éviter toute "
+"ambiguïté. Si plusieurs commandes correspondent à la sous-chaîne la dernière "
+"de la séquence sera prise en compte."
+
+# type: textblock
+#. type: textblock
+#: dh:860 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
+#: dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144
#: dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84
#: dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173
#: dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88
#: dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108
#: dh_installifupdown:71 dh_installinfo:79 dh_installinit:277
-#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:260
+#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:261
#: dh_installmanpages:199 dh_installmime:97 dh_installmodules:126
#: dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110
#: dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260
@@ -2535,14 +2527,14 @@ msgstr "L<debhelper(7)>"
# type: textblock
#. type: textblock
-#: dh:870 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
-#: dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:127
+#: dh:862 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
+#: dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124
#: dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103
#: dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175
#: dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90
#: dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110
#: dh_installifupdown:73 dh_installinfo:81 dh_installinit:279
-#: dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201
+#: dh_installlogrotate:54 dh_installman:263 dh_installmanpages:201
#: dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63
#: dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91
#: dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262
@@ -2601,7 +2593,7 @@ msgstr ""
# type: textblock
#. type: textblock
#: dh_auto_build:30 dh_auto_clean:32 dh_auto_configure:33 dh_auto_install:45
-#: dh_auto_test:32
+#: dh_auto_test:33
msgid ""
"See L<debhelper(7)/B<BUILD SYSTEM OPTIONS>> for a list of common build "
"system selection and control options."
@@ -2613,7 +2605,7 @@ msgstr ""
# type: =item
#. type: =item
#: dh_auto_build:35 dh_auto_clean:37 dh_auto_configure:38 dh_auto_install:56
-#: dh_auto_test:37 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69
+#: dh_auto_test:38 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69
#: dh_installinit:99 dh_makeshlibs:91 dh_shlibdeps:37
msgid "B<--> I<params>"
msgstr "B<--> I<paramètres>"
@@ -2886,7 +2878,7 @@ msgstr "dh_auto_test - Exécute automatiquement le jeu d'essai d'un paquet"
# type: textblock
#. type: textblock
-#: dh_auto_test:14
+#: dh_auto_test:15
msgid ""
"B<dh_auto_test> [S<I<build system options>>] [S<I<debhelper options>>] "
"[S<B<--> I<params>>]"
@@ -2896,7 +2888,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh_auto_test:18
+#: dh_auto_test:19
msgid ""
"B<dh_auto_test> is a debhelper program that tries to automatically run a "
"package's test suite. It does so by running the appropriate command for the "
@@ -2917,7 +2909,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh_auto_test:26
+#: dh_auto_test:27
msgid ""
"This is intended to work for about 90% of packages with a test suite. If it "
"doesn't work, you're encouraged to skip using B<dh_auto_test> at all, and "
@@ -2929,7 +2921,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh_auto_test:39
+#: dh_auto_test:40
msgid ""
"Pass I<params> to the program that is run. These can be used to supplement "
"or override the any standard parameters that B<dh_auto_test> passes."
@@ -2940,7 +2932,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh_auto_test:46
+#: dh_auto_test:47
msgid ""
"If the B<DEB_BUILD_OPTIONS> environment variable contains B<nocheck>, no "
"tests will be performed."
@@ -4444,7 +4436,7 @@ msgstr ""
# type: =item
#. type: =item
#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104
-#: dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52
+#: dh_installlogcheck:44 dh_installlogrotate:26 dh_installmodules:52
#: dh_installpam:35 dh_installppp:39 dh_installudev:39
msgid "B<--name=>I<name>"
msgstr "B<--name=>I<nom>"
@@ -5790,7 +5782,7 @@ msgstr ""
# type: textblock
#. type: textblock
-#: dh_installlogcheck:48
+#: dh_installlogcheck:46
#, fuzzy
#| msgid ""
#| "Look for files named F<debian/package.name.logrotate> and install them as "
@@ -8525,6 +8517,28 @@ msgstr "Charte Debian, version 2.2"
msgid "Andrew Stribblehill <ads@debian.org>"
msgstr "Andrew Stribblehill <ads@debian.org>"
+# type: verbatim
+#~ msgid ""
+#~ "To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
+#~ "sequence addons like this:\n"
+#~ "\t\n"
+#~ msgstr ""
+#~ "Pour patcher un paquet en utilisant « quilt », il faut demander à B<dh>\n"
+#~ "d'utiliser la séquence B<dh> propre à « quilt ». Voici comment faire :\n"
+#~ "\t\n"
+
+# type: verbatim
+#~ msgid ""
+#~ "\t#!/usr/bin/make -f\n"
+#~ "\t%:\n"
+#~ "\t\tdh $@ --with quilt\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\t#!/usr/bin/make -f\n"
+#~ "\t%:\n"
+#~ "\t\tdh $@ --with quilt\n"
+#~ "\n"
+
# type: =head2
#~ msgid "Debhelper compatibility levels"
#~ msgstr "Niveaux de compatibilité de debhelper"