summaryrefslogtreecommitdiff
path: root/man/po4a/po/debhelper.pot
diff options
context:
space:
mode:
Diffstat (limited to 'man/po4a/po/debhelper.pot')
-rw-r--r--man/po4a/po/debhelper.pot589
1 files changed, 290 insertions, 299 deletions
diff --git a/man/po4a/po/debhelper.pot b/man/po4a/po/debhelper.pot
index 8c06101..8c11284 100644
--- a/man/po4a/po/debhelper.pot
+++ b/man/po4a/po/debhelper.pot
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2011-06-24 14:29-0400\n"
+"POT-Creation-Date: 2011-07-17 16:31-0400\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@@ -401,7 +401,7 @@ msgstr ""
#. type: textblock
#: debhelper.pod:194
msgid ""
-"All of the B<dh_auto_>I<*> debhelper programs sets environment variables "
+"All of the B<dh_auto_>I<*> debhelper programs set environment variables "
"listed by B<dpkg-buildflags>, unless they are already set. They support "
"DEB_BUILD_OPTIONS=noopt too."
msgstr ""
@@ -521,154 +521,12 @@ msgid ""
msgstr ""
#. type: =head1
-#: debhelper.pod:257 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116 dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 dh_usrlocal:49
-msgid "NOTES"
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:259
-msgid "Multiple binary package support"
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:261
-msgid ""
-"If your source package generates more than one binary package, debhelper "
-"programs will default to acting on all binary packages when run. If your "
-"source package happens to generate one architecture dependent package, and "
-"another architecture independent package, this is not the correct behavior, "
-"because you need to generate the architecture dependent packages in the "
-"binary-arch F<debian/rules> target, and the architecture independent "
-"packages in the binary-indep F<debian/rules> target."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:269
-msgid ""
-"To facilitate this, as well as give you more control over which packages are "
-"acted on by debhelper programs, all debhelper programs accept the B<-a>, "
-"B<-i>, B<-p>, and B<-s> parameters. These parameters are cumulative. If "
-"none are given, debhelper programs default to acting on all packages listed "
-"in the control file."
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:275
-msgid "Automatic generation of Debian install scripts"
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:277
-msgid ""
-"Some debhelper commands will automatically generate parts of Debian "
-"maintainer scripts. If you want these automatically generated things "
-"included in your existing Debian maintainer scripts, then you need to add "
-"B<#DEBHELPER#> to your scripts, in the place the code should be added. "
-"B<#DEBHELPER#> will be replaced by any auto-generated code when you run "
-"B<dh_installdeb>."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:284
-msgid ""
-"If a script does not exist at all and debhelper needs to add something to "
-"it, then debhelper will create the complete script."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:287
-msgid ""
-"All debhelper commands that automatically generate code in this way let it "
-"be disabled by the -n parameter (see above)."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:290
-msgid ""
-"Note that the inserted code will be shell code, so you cannot directly use "
-"it in a Perl script. If you would like to embed it into a Perl script, here "
-"is one way to do that (note that I made sure that $1, $2, etc are set with "
-"the set command):"
-msgstr ""
-
-#. type: verbatim
-#: debhelper.pod:295
-#, no-wrap
-msgid ""
-" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
-" #DEBHELPER#\n"
-" EOF\n"
-" system ($temp) / 256 == 0\n"
-" \tor die \"Problem with debhelper scripts: $!\";\n"
-"\n"
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:301
-msgid "Automatic generation of miscellaneous dependencies."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:303
-msgid ""
-"Some debhelper commands may make the generated package need to depend on "
-"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
-"package will generally need to depend on debconf. Or if you use "
-"L<dh_installxfonts(1)>, your package will generally need to depend on a "
-"particular version of xutils. Keeping track of these miscellaneous "
-"dependencies can be annoying since they are dependant on how debhelper does "
-"things, so debhelper offers a way to automate it."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:311
-msgid ""
-"All commands of this type, besides documenting what dependencies may be "
-"needed on their man pages, will automatically generate a substvar called "
-"B<${misc:Depends}>. If you put that token into your F<debian/control> file, "
-"it will be expanded to the dependencies debhelper figures you need."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:316
-msgid ""
-"This is entirely independent of the standard B<${shlibs:Depends}> generated "
-"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by "
-"L<dh_perl(1)>. You can choose not to use any of these, if debhelper's "
-"guesses don't match reality."
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:321
-msgid "Package build directories"
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:323
-msgid ""
-"By default, all debhelper programs assume that the temporary directory used "
-"for assembling the tree of files in a package is debian/I<package>."
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:326
-msgid ""
-"Sometimes, you might want to use some other temporary directory. This is "
-"supported by the B<-P> flag. For example, \"B<dh_installdocs "
-"-Pdebian/tmp>\", will use B<debian/tmp> as the temporary directory. Note "
-"that if you use B<-P>, the debhelper programs can only be acting on a single "
-"package at a time. So if you have a package that builds many binary "
-"packages, you will need to also use the B<-p> flag to specify which binary "
-"package the debhelper program will act on."
-msgstr ""
-
-#. type: =head2
-#: debhelper.pod:334
-msgid "Debhelper compatibility levels"
+#: debhelper.pod:257
+msgid "COMPATABILITY LEVELS"
msgstr ""
#. type: textblock
-#: debhelper.pod:336
+#: debhelper.pod:259
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
@@ -679,14 +537,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:343
+#: debhelper.pod:266
msgid ""
"Tell debhelper what compatibility level to use by writing a number to "
"F<debian/compat>. For example, to turn on v8 mode:"
msgstr ""
#. type: verbatim
-#: debhelper.pod:346
+#: debhelper.pod:269
#, no-wrap
msgid ""
" % echo 8 > debian/compat\n"
@@ -694,7 +552,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:348
+#: debhelper.pod:271
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
@@ -705,17 +563,17 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:355
+#: debhelper.pod:278
msgid "These are the available compatibility levels:"
msgstr ""
#. type: =item
-#: debhelper.pod:359
+#: debhelper.pod:282
msgid "v1"
msgstr ""
#. type: textblock
-#: debhelper.pod:361
+#: debhelper.pod:284
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use F<debian/tmp> as the package tree "
@@ -725,39 +583,39 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:366 debhelper.pod:373 debhelper.pod:396 debhelper.pod:425
+#: debhelper.pod:289 debhelper.pod:296 debhelper.pod:319 debhelper.pod:348
msgid "This mode is deprecated."
msgstr ""
#. type: =item
-#: debhelper.pod:368
+#: debhelper.pod:291
msgid "v2"
msgstr ""
#. type: textblock
-#: debhelper.pod:370
+#: debhelper.pod:293
msgid ""
"In this mode, debhelper will consistently use debian/I<package> as the "
"package tree directory for every package that is built."
msgstr ""
#. type: =item
-#: debhelper.pod:375
+#: debhelper.pod:298
msgid "v3"
msgstr ""
#. type: textblock
-#: debhelper.pod:377
+#: debhelper.pod:300
msgid "This mode works like v2, with the following additions:"
msgstr ""
#. type: =item
-#: debhelper.pod:381 debhelper.pod:386 debhelper.pod:390 debhelper.pod:404 debhelper.pod:409 debhelper.pod:414 debhelper.pod:419 debhelper.pod:433 debhelper.pod:437 debhelper.pod:442 debhelper.pod:446 debhelper.pod:458 debhelper.pod:463 debhelper.pod:469 debhelper.pod:475 debhelper.pod:488 debhelper.pod:495 debhelper.pod:499 debhelper.pod:503 debhelper.pod:518 debhelper.pod:522 debhelper.pod:530 debhelper.pod:535 debhelper.pod:549 debhelper.pod:554 debhelper.pod:559
+#: debhelper.pod:304 debhelper.pod:309 debhelper.pod:313 debhelper.pod:327 debhelper.pod:332 debhelper.pod:337 debhelper.pod:342 debhelper.pod:356 debhelper.pod:360 debhelper.pod:365 debhelper.pod:369 debhelper.pod:381 debhelper.pod:386 debhelper.pod:392 debhelper.pod:398 debhelper.pod:411 debhelper.pod:418 debhelper.pod:422 debhelper.pod:426 debhelper.pod:441 debhelper.pod:445 debhelper.pod:453 debhelper.pod:458 debhelper.pod:472 debhelper.pod:477 debhelper.pod:482 debhelper.pod:487
msgid "-"
msgstr ""
#. type: textblock
-#: debhelper.pod:383
+#: debhelper.pod:306
msgid ""
"Debhelper config files support globbing via B<*> and B<?>, when "
"appropriate. To turn this off and use those characters raw, just prefix with "
@@ -765,106 +623,106 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:388
+#: debhelper.pod:311
msgid ""
"B<dh_makeshlibs> makes the F<postinst> and F<postrm> scripts call "
"B<ldconfig>."
msgstr ""
#. type: textblock
-#: debhelper.pod:392
+#: debhelper.pod:315
msgid ""
"Every file in F<etc/> is automatically flagged as a conffile by "
"B<dh_installdeb>."
msgstr ""
#. type: =item
-#: debhelper.pod:398
+#: debhelper.pod:321
msgid "v4"
msgstr ""
#. type: textblock
-#: debhelper.pod:400
+#: debhelper.pod:323
msgid "Changes from v3 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:406
+#: debhelper.pod:329
msgid ""
"B<dh_makeshlibs -V> will not include the Debian part of the version number "
"in the generated dependency line in the shlibs file."
msgstr ""
#. type: textblock
-#: debhelper.pod:411
+#: debhelper.pod:334
msgid ""
"You are encouraged to put the new B<${misc:Depends}> into F<debian/control> "
"to supplement the B<${shlibs:Depends}> field."
msgstr ""
#. type: textblock
-#: debhelper.pod:416
+#: debhelper.pod:339
msgid ""
"B<dh_fixperms> will make all files in F<bin/> directories and in "
"F<etc/init.d> executable."
msgstr ""
#. type: textblock
-#: debhelper.pod:421
+#: debhelper.pod:344
msgid "B<dh_link> will correct existing links to conform with policy."
msgstr ""
#. type: =item
-#: debhelper.pod:427
+#: debhelper.pod:350
msgid "v5"
msgstr ""
#. type: textblock
-#: debhelper.pod:429
+#: debhelper.pod:352
msgid "Changes from v4 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:435
+#: debhelper.pod:358
msgid "Comments are ignored in debhelper config files."
msgstr ""
#. type: textblock
-#: debhelper.pod:439
+#: debhelper.pod:362
msgid ""
"B<dh_strip --dbg-package> now specifies the name of a package to put "
"debugging symbols in, not the packages to take the symbols from."
msgstr ""
#. type: textblock
-#: debhelper.pod:444
+#: debhelper.pod:367
msgid "B<dh_installdocs> skips installing empty files."
msgstr ""
#. type: textblock
-#: debhelper.pod:448
+#: debhelper.pod:371
msgid "B<dh_install> errors out if wildcards expand to nothing."
msgstr ""
#. type: =item
-#: debhelper.pod:452
+#: debhelper.pod:375
msgid "v6"
msgstr ""
#. type: textblock
-#: debhelper.pod:454
+#: debhelper.pod:377
msgid "Changes from v5 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:460
+#: debhelper.pod:383
msgid ""
"Commands that generate maintainer script fragments will order the fragments "
"in reverse order for the F<prerm> and F<postrm> scripts."
msgstr ""
#. type: textblock
-#: debhelper.pod:465
+#: debhelper.pod:388
msgid ""
"B<dh_installwm> will install a slave manpage link for "
"F<x-window-manager.1.gz>, if it sees the man page in F<usr/share/man/man1> "
@@ -872,7 +730,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:471
+#: debhelper.pod:394
msgid ""
"B<dh_builddeb> did not previously delete everything matching "
"B<DH_ALWAYS_EXCLUDE>, if it was set to a list of things to exclude, such as "
@@ -880,24 +738,24 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:477
+#: debhelper.pod:400
msgid ""
"B<dh_installman> allows overwriting existing man pages in the package build "
"directory. In previous compatibility levels it silently refuses to do this."
msgstr ""
#. type: =item
-#: debhelper.pod:482
+#: debhelper.pod:405
msgid "v7"
msgstr ""
#. type: textblock
-#: debhelper.pod:484
+#: debhelper.pod:407
msgid "Changes from v6 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:490
+#: debhelper.pod:413
msgid ""
"B<dh_install>, will fall back to looking for files in F<debian/tmp> if it "
"doesn't find them in the current directory (or wherever you tell it look "
@@ -907,44 +765,44 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:497
+#: debhelper.pod:420
msgid "B<dh_clean> will read F<debian/clean> and delete files listed there."
msgstr ""
#. type: textblock
-#: debhelper.pod:501
+#: debhelper.pod:424
msgid "B<dh_clean> will delete toplevel F<*-stamp> files."
msgstr ""
#. type: textblock
-#: debhelper.pod:505
+#: debhelper.pod:428
msgid ""
"B<dh_installchangelogs> will guess at what file is the upstream changelog if "
"none is specified."
msgstr ""
#. type: =item
-#: debhelper.pod:510
+#: debhelper.pod:433
msgid "v8"
msgstr ""
#. type: textblock
-#: debhelper.pod:512
+#: debhelper.pod:435
msgid "This is the recommended mode of operation."
msgstr ""
#. type: textblock
-#: debhelper.pod:514
+#: debhelper.pod:437
msgid "Changes from v7 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:520
+#: debhelper.pod:443
msgid "Commands will fail rather than warning when they are passed unknown options."
msgstr ""
#. type: textblock
-#: debhelper.pod:524
+#: debhelper.pod:447
msgid ""
"B<dh_makeshlibs> will run B<dpkg-gensymbols> on all shared libraries that it "
"generates shlibs files for. So B<-X> can be used to exclude libraries. "
@@ -954,7 +812,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:532
+#: debhelper.pod:455
msgid ""
"B<dh> requires the sequence to run be specified as the first parameter, and "
"any switches come after it. Ie, use \"B<dh $@ --foo>\", not \"B<dh --foo "
@@ -962,55 +820,202 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:537
+#: debhelper.pod:460
msgid ""
"B<dh_auto_>I<*> prefer to use Perl's B<Module::Build> in preference to "
"F<Makefile.PL>."
msgstr ""
#. type: =item
-#: debhelper.pod:541
+#: debhelper.pod:464
msgid "v9"
msgstr ""
#. type: textblock
-#: debhelper.pod:543
-msgid "This compatability level is still open for development; use with caution."
+#: debhelper.pod:466
+msgid "This compatibility level is still open for development; use with caution."
msgstr ""
#. type: textblock
-#: debhelper.pod:545
+#: debhelper.pod:468
msgid "Changes from v8 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:551
+#: debhelper.pod:474
msgid ""
"Multiarch support. In particular, B<dh_auto_configure> passes multiarch "
"directories to autoconf in --libdir and --libexecdir."
msgstr ""
#. type: textblock
-#: debhelper.pod:556
+#: debhelper.pod:479
msgid ""
"dh supports use of standard targets in debian/rules without needing to "
"manually define the dependencies between targets there."
msgstr ""
#. type: textblock
+#: debhelper.pod:484
+msgid ""
+"B<dh_auto_configure> does not include the source package name in "
+"--libexecdir when using autoconf."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:489
+msgid "B<dh> does not default to enabling --with=python-support"
+msgstr ""
+
+#. type: =head1
+#: debhelper.pod:495 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116 dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 dh_usrlocal:49
+msgid "NOTES"
+msgstr ""
+
+#. type: =head2
+#: debhelper.pod:497
+msgid "Multiple binary package support"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:499
+msgid ""
+"If your source package generates more than one binary package, debhelper "
+"programs will default to acting on all binary packages when run. If your "
+"source package happens to generate one architecture dependent package, and "
+"another architecture independent package, this is not the correct behavior, "
+"because you need to generate the architecture dependent packages in the "
+"binary-arch F<debian/rules> target, and the architecture independent "
+"packages in the binary-indep F<debian/rules> target."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:507
+msgid ""
+"To facilitate this, as well as give you more control over which packages are "
+"acted on by debhelper programs, all debhelper programs accept the B<-a>, "
+"B<-i>, B<-p>, and B<-s> parameters. These parameters are cumulative. If "
+"none are given, debhelper programs default to acting on all packages listed "
+"in the control file."
+msgstr ""
+
+#. type: =head2
+#: debhelper.pod:513
+msgid "Automatic generation of Debian install scripts"
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:515
+msgid ""
+"Some debhelper commands will automatically generate parts of Debian "
+"maintainer scripts. If you want these automatically generated things "
+"included in your existing Debian maintainer scripts, then you need to add "
+"B<#DEBHELPER#> to your scripts, in the place the code should be added. "
+"B<#DEBHELPER#> will be replaced by any auto-generated code when you run "
+"B<dh_installdeb>."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:522
+msgid ""
+"If a script does not exist at all and debhelper needs to add something to "
+"it, then debhelper will create the complete script."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:525
+msgid ""
+"All debhelper commands that automatically generate code in this way let it "
+"be disabled by the -n parameter (see above)."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:528
+msgid ""
+"Note that the inserted code will be shell code, so you cannot directly use "
+"it in a Perl script. If you would like to embed it into a Perl script, here "
+"is one way to do that (note that I made sure that $1, $2, etc are set with "
+"the set command):"
+msgstr ""
+
+#. type: verbatim
+#: debhelper.pod:533
+#, no-wrap
+msgid ""
+" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
+" #DEBHELPER#\n"
+" EOF\n"
+" system ($temp) / 256 == 0\n"
+" \tor die \"Problem with debhelper scripts: $!\";\n"
+"\n"
+msgstr ""
+
+#. type: =head2
+#: debhelper.pod:539
+msgid "Automatic generation of miscellaneous dependencies."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:541
+msgid ""
+"Some debhelper commands may make the generated package need to depend on "
+"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
+"package will generally need to depend on debconf. Or if you use "
+"L<dh_installxfonts(1)>, your package will generally need to depend on a "
+"particular version of xutils. Keeping track of these miscellaneous "
+"dependencies can be annoying since they are dependent on how debhelper does "
+"things, so debhelper offers a way to automate it."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:549
+msgid ""
+"All commands of this type, besides documenting what dependencies may be "
+"needed on their man pages, will automatically generate a substvar called "
+"B<${misc:Depends}>. If you put that token into your F<debian/control> file, "
+"it will be expanded to the dependencies debhelper figures you need."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:554
+msgid ""
+"This is entirely independent of the standard B<${shlibs:Depends}> generated "
+"by L<dh_makeshlibs(1)>, and the B<${perl:Depends}> generated by "
+"L<dh_perl(1)>. You can choose not to use any of these, if debhelper's "
+"guesses don't match reality."
+msgstr ""
+
+#. type: =head2
+#: debhelper.pod:559
+msgid "Package build directories"
+msgstr ""
+
+#. type: textblock
#: debhelper.pod:561
msgid ""
-"<dh_auto_configure> does not include the source package name in --libexecdir "
-"when using autoconf."
+"By default, all debhelper programs assume that the temporary directory used "
+"for assembling the tree of files in a package is debian/I<package>."
+msgstr ""
+
+#. type: textblock
+#: debhelper.pod:564
+msgid ""
+"Sometimes, you might want to use some other temporary directory. This is "
+"supported by the B<-P> flag. For example, \"B<dh_installdocs "
+"-Pdebian/tmp>\", will use B<debian/tmp> as the temporary directory. Note "
+"that if you use B<-P>, the debhelper programs can only be acting on a single "
+"package at a time. So if you have a package that builds many binary "
+"packages, you will need to also use the B<-p> flag to specify which binary "
+"package the debhelper program will act on."
msgstr ""
#. type: =head2
-#: debhelper.pod:568
+#: debhelper.pod:572
msgid "udebs"
msgstr ""
#. type: textblock
-#: debhelper.pod:570
+#: debhelper.pod:574
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"B<Package-Type: udeb>\" to the package's stanza in F<debian/control>, and "
@@ -1021,23 +1026,12 @@ msgid ""
msgstr ""
#. type: =head2
-#: debhelper.pod:577
-msgid "Other notes"
-msgstr ""
-
-#. type: textblock
-#: debhelper.pod:579
-msgid ""
-"In general, if any debhelper program needs a directory to exist under "
-"B<debian/>, it will create it. I haven't bothered to document this in all "
-"the man pages, but for example, B<dh_installdeb> knows to make "
-"debian/I<package>/DEBIAN/ before trying to put files there, "
-"B<dh_installmenu> knows you need a debian/I<package>/usr/share/menu/ before "
-"installing the menu files, etc."
+#: debhelper.pod:581
+msgid "Build depends"
msgstr ""
#. type: textblock
-#: debhelper.pod:585
+#: debhelper.pod:583
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in F<debian/control>. You should build-depend on a "
@@ -1046,7 +1040,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: debhelper.pod:591
+#: debhelper.pod:589
#, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
@@ -1054,51 +1048,51 @@ msgid ""
msgstr ""
#. type: =head1
-#: debhelper.pod:593
+#: debhelper.pod:591
msgid "ENVIRONMENT"
msgstr ""
#. type: =item
-#: debhelper.pod:597
+#: debhelper.pod:595
msgid "B<DH_VERBOSE>"
msgstr ""
#. type: textblock
-#: debhelper.pod:599
+#: debhelper.pod:597
msgid ""
"Set to B<1> to enable verbose mode. Debhelper will output every command it "
"runs that modifies files on the build system."
msgstr ""
#. type: =item
-#: debhelper.pod:602
+#: debhelper.pod:600
msgid "B<DH_COMPAT>"
msgstr ""
#. type: textblock
-#: debhelper.pod:604
+#: debhelper.pod:602
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in F<debian/compat>."
msgstr ""
#. type: =item
-#: debhelper.pod:607
+#: debhelper.pod:605
msgid "B<DH_NO_ACT>"
msgstr ""
#. type: textblock
-#: debhelper.pod:609
+#: debhelper.pod:607
msgid "Set to B<1> to enable no-act mode."
msgstr ""
#. type: =item
-#: debhelper.pod:611
+#: debhelper.pod:609
msgid "B<DH_OPTIONS>"
msgstr ""
#. type: textblock
-#: debhelper.pod:613
+#: debhelper.pod:611
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands. Command-specific options will be ignored by commands "
@@ -1106,7 +1100,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:617
+#: debhelper.pod:615
msgid ""
"This is useful in some situations, for example, if you need to pass B<-p> to "
"all debhelper commands that will be run. One good way to set B<DH_OPTIONS> "
@@ -1115,12 +1109,12 @@ msgid ""
msgstr ""
#. type: =item
-#: debhelper.pod:622
+#: debhelper.pod:620
msgid "B<DH_ALWAYS_EXCLUDE>"
msgstr ""
#. type: textblock
-#: debhelper.pod:624
+#: debhelper.pod:622
msgid ""
"If set, this adds the value the variable is set to to the B<-X> options of "
"all commands that support the B<-X> option. Moreover, B<dh_builddeb> will "
@@ -1128,7 +1122,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:628
+#: debhelper.pod:626
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting B<DH_ALWAYS_EXCLUDE=CVS> will prevent any CVS directories from "
@@ -1139,44 +1133,44 @@ msgid ""
msgstr ""
#. type: textblock
-#: debhelper.pod:635
+#: debhelper.pod:633
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"B<DH_ALWAYS_EXCLUDE=CVS:.svn>"
msgstr ""
#. type: =head1
-#: debhelper.pod:640 dh:872 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122 dh_builddeb:91 dh_clean:139 dh_compress:204 dh_desktop:31 dh_fixperms:129 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:280 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:66 dh_installlogrotate:50 dh_installman:258 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114
+#: debhelper.pod:638 dh:875 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122 dh_builddeb:123 dh_clean:142 dh_compress:204 dh_desktop:31 dh_fixperms:129 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:66 dh_installlogrotate:50 dh_installman:258 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114
msgid "SEE ALSO"
msgstr ""
#. type: =item
-#: debhelper.pod:644
+#: debhelper.pod:642
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr ""
#. type: textblock
-#: debhelper.pod:646
+#: debhelper.pod:644
msgid "A set of example F<debian/rules> files that use debhelper."
msgstr ""
#. type: =item
-#: debhelper.pod:648
+#: debhelper.pod:646
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr ""
#. type: textblock
-#: debhelper.pod:650
+#: debhelper.pod:648
msgid "Debhelper web site."
msgstr ""
#. type: =head1
-#: debhelper.pod:654 dh:878 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130 dh_builddeb:97 dh_clean:145 dh_compress:210 dh_desktop:37 dh_fixperms:135 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:286 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:72 dh_installlogrotate:56 dh_installman:264 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
+#: debhelper.pod:652 dh:881 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130 dh_builddeb:129 dh_clean:148 dh_compress:210 dh_desktop:37 dh_fixperms:135 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:72 dh_installlogrotate:56 dh_installman:264 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
msgid "AUTHOR"
msgstr ""
#. type: textblock
-#: debhelper.pod:656 dh:880 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:99 dh_clean:147 dh_compress:212 dh_fixperms:137 dh_gencontrol:90 dh_install:288 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:266 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36
+#: debhelper.pod:654 dh:883 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:131 dh_clean:150 dh_compress:212 dh_fixperms:137 dh_gencontrol:90 dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:266 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36
msgid "Joey Hess <joeyh@debian.org>"
msgstr ""
@@ -1431,22 +1425,23 @@ msgstr ""
#. type: textblock
#: dh:165
msgid ""
-"If your package is a Python package, B<dh> will use B<dh_pysupport> by "
-"default. This is how to use B<dh_pycentral> instead."
+"Python tools are not run by dh by default, due to the continual change in "
+"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
+"Here is how to use B<dh_python2>."
msgstr ""
#. type: verbatim
-#: dh:168
+#: dh:169
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\t%:\n"
-"\t\tdh $@ --with python-central\n"
+"\t\tdh $@ --with python2\n"
"\n"
msgstr ""
#. type: textblock
-#: dh:172
+#: dh:173
msgid ""
"If your package uses autotools and you want to freshen F<config.sub> and "
"F<config.guess> with newer versions from the B<autotools-dev> package at "
@@ -1455,7 +1450,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:177
+#: dh:178
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1465,14 +1460,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:181
+#: dh:182
msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
msgstr ""
#. type: verbatim
-#: dh:185
+#: dh:186
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1482,7 +1477,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:189
+#: dh:190
#, no-wrap
msgid ""
"To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
@@ -1491,7 +1486,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:192
+#: dh:193
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1501,7 +1496,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:196
+#: dh:197
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
@@ -1509,7 +1504,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:200
+#: dh:201
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1519,14 +1514,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:204
+#: dh:205
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
msgstr ""
#. type: verbatim
-#: dh:207
+#: dh:208
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1536,14 +1531,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:211
+#: dh:212
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
msgstr ""
#. type: verbatim
-#: dh:214
+#: dh:215
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1553,14 +1548,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:218
+#: dh:219
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
msgstr ""
#. type: verbatim
-#: dh:221 dh:232 dh:249
+#: dh:222 dh:233 dh:250
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
@@ -1570,7 +1565,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:225
+#: dh:226
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
@@ -1579,7 +1574,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:228
+#: dh:229
msgid ""
"Sometimes, you may need to make an override target only run commands when a "
"particular package is being built. This can be accomplished using "
@@ -1587,7 +1582,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:236
+#: dh:237
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
@@ -1599,7 +1594,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:242
+#: dh:243
msgid ""
"Finally, remember that you are not limited to using override targets in the "
"rules file when using B<dh>. You can also explicitly define any of the "
@@ -1610,7 +1605,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh:253
+#: dh:254
#, no-wrap
msgid ""
"\tbuild-indep:\n"
@@ -1621,29 +1616,29 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:258
+#: dh:259
msgid ""
"Note that in the example above, dh will arrange for \"debian/rules build\" "
"to call your build-indep and build-arch targets. You do not need to "
"explicitly define the dependencies in the rules file when using dh with "
-"compatability level v9. This example would be more complicated with earlier "
-"compatability levels."
+"compatibility level v9. This example would be more complicated with earlier "
+"compatibility levels."
msgstr ""
#. type: =head1
-#: dh:264
+#: dh:265
msgid "INTERNALS"
msgstr ""
#. type: textblock
-#: dh:266
+#: dh:267
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
msgstr ""
#. type: textblock
-#: dh:268
+#: dh:269
msgid ""
"Each debhelper command will record when it's successfully run in "
"F<debian/package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can "
@@ -1652,7 +1647,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:273
+#: dh:274
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
@@ -1661,21 +1656,21 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:278
+#: dh:279
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
msgstr ""
#. type: textblock
-#: dh:281
+#: dh:282
msgid ""
"B<dh> sets environment variables listed by B<dpkg-buildflags>, unless they "
"are already set. It supports DEB_BUILD_OPTIONS=noopt too."
msgstr ""
#. type: textblock
-#: dh:284
+#: dh:285
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
@@ -1684,12 +1679,12 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh:874 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 dh_auto_install:87 dh_auto_test:60 dh_builddeb:93 dh_clean:141 dh_compress:206 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 dh_install:282 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:68 dh_installlogrotate:52 dh_installman:260 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116
+#: dh:877 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 dh_auto_install:87 dh_auto_test:60 dh_builddeb:125 dh_clean:144 dh_compress:206 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:68 dh_installlogrotate:52 dh_installman:260 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116
msgid "L<debhelper(7)>"
msgstr ""
#. type: textblock
-#: dh:876 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:95 dh_clean:143 dh_compress:208 dh_desktop:35 dh_fixperms:133 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:284 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
+#: dh:879 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:127 dh_clean:146 dh_compress:208 dh_desktop:35 dh_fixperms:133 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
msgid "This program is a part of debhelper."
msgstr ""
@@ -2624,21 +2619,17 @@ msgstr ""
msgid ""
"Note that this is not the same as the B<--sourcedirectory> option used by "
"the B<dh_auto_>I<*> commands. You rarely need to use this option, since "
-"B<dh_install> automatically looks for files in F<debian/tmp> in debhelper"
-msgstr ""
-
-#. type: textblock
-#: dh_install:89
-msgid "compatibility level 7 and above."
+"B<dh_install> automatically looks for files in F<debian/tmp> in debhelper "
+"compatibility level 7 and above."
msgstr ""
#. type: =item
-#: dh_install:91
+#: dh_install:90
msgid "B<--autodest>"
msgstr ""
#. type: textblock
-#: dh_install:93
+#: dh_install:92
msgid ""
"Guess as the destination directory to install things to. If this is "
"specified, you should not list destination directories in "
@@ -2647,7 +2638,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh_install:98
+#: dh_install:97
msgid ""
"Strip off F<debian/tmp> (or the sourcedir if one is given) from the front of "
"the filename, if it is present, and install into the dirname of the "
@@ -2657,7 +2648,7 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh_install:104
+#: dh_install:103
msgid ""
"Note that if you list exactly one filename or wildcard-pattern on a line by "
"itself in a F<debian/package.install> file, with no explicit destination, "
@@ -2666,24 +2657,24 @@ msgid ""
msgstr ""
#. type: =item
-#: dh_install:109
+#: dh_install:108
msgid "I<file> ... I<dest>"
msgstr ""
#. type: textblock
-#: dh_install:111
+#: dh_install:110
msgid ""
"Lists files (or directories) to install and where to install them to. The "
"files will be installed into the first package F<dh_install> acts on."
msgstr ""
#. type: =head1
-#: dh_install:253
+#: dh_install:252
msgid "EXAMPLE"
msgstr ""
#. type: textblock
-#: dh_install:255
+#: dh_install:254
msgid ""
"Suppose your package's upstream F<Makefile> installs a binary, a man page, "
"and a library into appropriate subdirectories of F<debian/tmp>. You want to "
@@ -2693,7 +2684,7 @@ msgid ""
msgstr ""
#. type: verbatim
-#: dh_install:261
+#: dh_install:260
#, no-wrap
msgid ""
" usr/bin\n"
@@ -2702,12 +2693,12 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh_install:264
+#: dh_install:263
msgid "While F<debian/libfoo.install> contains:"
msgstr ""
#. type: verbatim
-#: dh_install:266
+#: dh_install:265
#, no-wrap
msgid ""
" usr/lib/libfoo*.so.*\n"
@@ -2715,14 +2706,14 @@ msgid ""
msgstr ""
#. type: textblock
-#: dh_install:268
+#: dh_install:267
msgid ""
"If you want a libfoo-dev package too, F<debian/libfoo-dev.install> might "
"contain:"
msgstr ""
#. type: verbatim
-#: dh_install:270
+#: dh_install:269
#, no-wrap
msgid ""
" usr/include\n"
@@ -2732,12 +2723,12 @@ msgid ""
msgstr ""
#. type: =head1
-#: dh_install:274
+#: dh_install:273
msgid "LIMITATIONS"
msgstr ""
#. type: verbatim
-#: dh_install:276
+#: dh_install:275
#, no-wrap
msgid ""
"B<dh_install> cannot rename files or directories, it can only install them\n"
@@ -4870,7 +4861,7 @@ msgstr ""
msgid ""
"By default, the shlibs file generated by this program does not make packages "
"depend on any particular version of the package containing the shared "
-"library. It may be necessary for you to add some version dependancy "
+"library. It may be necessary for you to add some version dependency "
"information to the shlibs file. If B<-V> is specified with no dependency "
"information, the current upstream version of the package is plugged into a "
"dependency that looks like \"I<packagename> B<(E<gt>>= "
@@ -5245,9 +5236,9 @@ msgstr ""
#. type: textblock
#: dh_python:19
msgid ""
-"Note: This program is deprecated. You should use B<dh_pysupport> or "
-"B<dh_pycentral> instead. This program will do nothing if F<debian/pycompat> "
-"or a B<Python-Version> F<control> file field exists."
+"Note: This program is deprecated. You should use B<dh_python2> instead. "
+"This program will do nothing if F<debian/pycompat> or a B<Python-Version> "
+"F<control> file field exists."
msgstr ""
#. type: textblock