From 0152f75c3dd6de14dfca258ce7ca2f90cea055fa Mon Sep 17 00:00:00 2001 From: Joey Hess Date: Sat, 10 Sep 2011 18:35:52 -0400 Subject: refactor Should be no behavior changes, although I did drop the comment when skipping an empty override target. --- dh | 144 +++++++------- man/po4a/po/debhelper.pot | 353 +++++++++++++++++----------------- man/po4a/po/es.po | 452 ++++++++++++++++++++++--------------------- man/po4a/po/fr.po | 478 ++++++++++++++++++++++++---------------------- 4 files changed, 720 insertions(+), 707 deletions(-) diff --git a/dh b/dh index 16aa395b..3afec527 100755 --- a/dh +++ b/dh @@ -626,6 +626,8 @@ elsif ($dh{BEFORE}) { # Now run the commands in the sequence. foreach my $i (0..$stoppoint) { + my $command=$sequence[$i]; + # Figure out which packages need to run this command. my @exclude; foreach my $package (@packages) { @@ -640,92 +642,84 @@ foreach my $i (0..$stoppoint) { next; } - run($sequence[$i], \@packages, \@exclude, @options); + my $rules_target = rules_target($command); + if (defined $rules_target) { + # Don't pass DH_ environment variables, since this is + # a fresh invocation of debian/rules and any sub-dh commands. + delete $ENV{DH_INTERNAL_OPTIONS}; + delete $ENV{DH_INTERNAL_OVERRIDE}; + run("debian/rules", $rules_target); + next; + } + + my @opts=@options; + # If some packages are excluded, add flags + # to prevent them from being acted on. + push @opts, map { "-N$_" } @exclude; + + # Check for override targets in debian/rules, and run instead of + # the usual command. + next if run_override("override_".$command, $command, + \@packages, \@exclude, @opts); + + run($command, @opts); } sub run { my $command=shift; - my @packages=@{shift()}; - my @exclude=@{shift()}; my @options=@_; - - # If some packages are excluded, add flags - # to prevent them from being acted on. - push @options, map { "-N$_" } @exclude; - # Check for override targets in debian/rules and - # run them instead of running the command directly. - my $override_command; - my $has_explicit_target = rules_explicit_target("override_".$command); + # Include additional command options if any + unshift @options, @{$command_opts{$command}} + if exists $command_opts{$command}; - my $rules_target = rules_target($command); - if (defined $rules_target) { - # Don't pass DH_ environment variables, since this is - # a fresh invocation of debian/rules and any sub-dh - # commands. - $override_command=$command; - delete $ENV{DH_INTERNAL_OPTIONS}; - delete $ENV{DH_INTERNAL_OVERRIDE}; - $command="debian/rules"; - @options=$rules_target; - } - elsif (defined $has_explicit_target) { - $override_command=$command; - # Check if target isn't noop - if ($has_explicit_target) { - # This passes the options through to commands called - # inside the target. - $ENV{DH_INTERNAL_OPTIONS}=join("\x1e", @options); - $ENV{DH_INTERNAL_OVERRIDE}=$command; - $command="debian/rules"; - @options="override_".$override_command; - } - else { - $command = undef; - } - } - else { - # Pass additional command options if any - unshift @options, @{$command_opts{$command}} if exists $command_opts{$command}; - } + # 3 space indent lines the command being run up under the + # sequence name after "dh ". + print " ".escape_shell($command, @options)."\n"; - if (defined $command) { - # 3 space indent lines the command being run up under the - # sequence name after "dh ". - print " ".escape_shell($command, @options)."\n"; + return if $dh{NO_ACT}; + + my $ret=system($command, @options); + if ($ret >> 8 != 0) { + exit $ret >> 8; } - else { - print " ", "# Skipping ", $override_command, " - empty override", "\n"; + elsif ($ret) { + exit 1; } - - if (! $dh{NO_ACT}) { - if (defined $command) { - my $ret=system($command, @options); - - if ($ret >> 8 != 0) { - exit $ret >> 8; - } - elsif ($ret) { - exit 1; - } - } - - if (defined $override_command) { - # Update log for overridden command now that it has - # finished successfully. - # (But avoid logging for dh_clean since it removes - # the log earlier.) - if ($override_command ne 'dh_clean') { - my %packages=map { $_ => 1 } @packages; - map { delete $packages{$_} } @exclude; - write_log($override_command, keys %packages); - commit_override_log(keys %packages); - } +} - delete $ENV{DH_INTERNAL_OPTIONS}; - delete $ENV{DH_INTERNAL_OVERRIDE}; - } - } +# Returns true if an override target exists for a command. +sub run_override { + my $override=shift; + my $command=shift; + my @packages=@{shift()}; + my @exclude=@{shift()}; + my @options=@_; + + my $has_explicit_target = rules_explicit_target($override); + return 0 unless defined $has_explicit_target; # no such override + return 1 if ! $has_explicit_target; # has empty override + + # This passes the options through to commands called + # inside the target. + $ENV{DH_INTERNAL_OPTIONS}=join("\x1e", @options); + $ENV{DH_INTERNAL_OVERRIDE}=$command; + run("debian/rules", "override_".$command); + delete $ENV{DH_INTERNAL_OPTIONS}; + delete $ENV{DH_INTERNAL_OVERRIDE}; + + # Update log for overridden command now that it has + # finished successfully. + # (But avoid logging for dh_clean since it removes + # the log earlier.) + if (! $dh{NO_ACT} && $command ne 'dh_clean') { + my %packages=map { $_ => 1 } @packages; + map { delete $packages{$_} } @exclude; + write_log($command, keys %packages); + commit_override_log(keys %packages); + } + + return 1; } sub optimize_sequence { diff --git a/man/po4a/po/debhelper.pot b/man/po4a/po/debhelper.pot index f7dbdce5..cc1b9816 100644 --- a/man/po4a/po/debhelper.pot +++ b/man/po4a/po/debhelper.pot @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2011-08-23 15:26-0400\n" +"POT-Creation-Date: 2011-09-10 18:35-0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -27,7 +27,7 @@ msgid "debhelper - the debhelper tool suite" msgstr "" #. type: =head1 -#: debhelper.pod:5 dh:12 dh_auto_build:12 dh_auto_clean:13 dh_auto_configure:12 dh_auto_install:15 dh_auto_test:12 dh_bugfiles:12 dh_builddeb:12 dh_clean:12 dh_compress:13 dh_desktop:12 dh_fixperms:12 dh_gconf:12 dh_gencontrol:12 dh_icons:13 dh_install:13 dh_installcatalogs:14 dh_installchangelogs:12 dh_installcron:12 dh_installdeb:12 dh_installdebconf:12 dh_installdirs:12 dh_installdocs:12 dh_installemacsen:12 dh_installexamples:12 dh_installifupdown:12 dh_installinfo:12 dh_installinit:12 dh_installlogcheck:12 dh_installlogrotate:12 dh_installman:13 dh_installmanpages:13 dh_installmenu:12 dh_installmime:12 dh_installmodules:14 dh_installpam:12 dh_installppp:12 dh_installudev:13 dh_installwm:12 dh_installxfonts:12 dh_link:13 dh_lintian:12 dh_listpackages:12 dh_makeshlibs:12 dh_md5sums:13 dh_movefiles:12 dh_perl:14 dh_prep:12 dh_python:13 dh_scrollkeeper:12 dh_shlibdeps:13 dh_strip:13 dh_suidregister:7 dh_testdir:12 dh_testroot:7 dh_undocumented:12 dh_usrlocal:15 +#: debhelper.pod:5 dh:12 dh_auto_build:12 dh_auto_clean:13 dh_auto_configure:12 dh_auto_install:15 dh_auto_test:13 dh_bugfiles:12 dh_builddeb:12 dh_clean:12 dh_compress:13 dh_desktop:12 dh_fixperms:12 dh_gconf:12 dh_gencontrol:12 dh_icons:13 dh_install:13 dh_installcatalogs:14 dh_installchangelogs:12 dh_installcron:12 dh_installdeb:12 dh_installdebconf:12 dh_installdirs:12 dh_installdocs:12 dh_installemacsen:12 dh_installexamples:12 dh_installifupdown:12 dh_installinfo:12 dh_installinit:12 dh_installlogcheck:12 dh_installlogrotate:12 dh_installman:13 dh_installmanpages:13 dh_installmenu:12 dh_installmime:12 dh_installmodules:14 dh_installpam:12 dh_installppp:12 dh_installudev:13 dh_installwm:12 dh_installxfonts:12 dh_link:13 dh_lintian:12 dh_listpackages:12 dh_makeshlibs:12 dh_md5sums:13 dh_movefiles:12 dh_perl:14 dh_prep:12 dh_python:13 dh_scrollkeeper:12 dh_shlibdeps:13 dh_strip:13 dh_suidregister:7 dh_testdir:12 dh_testroot:7 dh_undocumented:12 dh_usrlocal:15 msgid "SYNOPSIS" msgstr "" @@ -39,7 +39,7 @@ msgid "" msgstr "" #. type: =head1 -#: debhelper.pod:9 dh:16 dh_auto_build:16 dh_auto_clean:17 dh_auto_configure:16 dh_auto_install:19 dh_auto_test:16 dh_bugfiles:16 dh_builddeb:16 dh_clean:16 dh_compress:17 dh_desktop:16 dh_fixperms:16 dh_gconf:16 dh_gencontrol:16 dh_icons:17 dh_install:17 dh_installcatalogs:18 dh_installchangelogs:16 dh_installcron:16 dh_installdeb:16 dh_installdebconf:16 dh_installdirs:16 dh_installdocs:16 dh_installemacsen:16 dh_installexamples:16 dh_installifupdown:16 dh_installinfo:16 dh_installinit:16 dh_installlogcheck:16 dh_installlogrotate:16 dh_installman:17 dh_installmanpages:17 dh_installmenu:16 dh_installmime:16 dh_installmodules:18 dh_installpam:16 dh_installppp:16 dh_installudev:17 dh_installwm:16 dh_installxfonts:16 dh_link:17 dh_lintian:16 dh_listpackages:16 dh_makeshlibs:16 dh_md5sums:17 dh_movefiles:16 dh_perl:18 dh_prep:16 dh_python:17 dh_scrollkeeper:16 dh_shlibdeps:17 dh_strip:17 dh_suidregister:11 dh_testdir:16 dh_testroot:11 dh_undocumented:16 dh_usrlocal:19 +#: debhelper.pod:9 dh:16 dh_auto_build:16 dh_auto_clean:17 dh_auto_configure:16 dh_auto_install:19 dh_auto_test:17 dh_bugfiles:16 dh_builddeb:16 dh_clean:16 dh_compress:17 dh_desktop:16 dh_fixperms:16 dh_gconf:16 dh_gencontrol:16 dh_icons:17 dh_install:17 dh_installcatalogs:18 dh_installchangelogs:16 dh_installcron:16 dh_installdeb:16 dh_installdebconf:16 dh_installdirs:16 dh_installdocs:16 dh_installemacsen:16 dh_installexamples:16 dh_installifupdown:16 dh_installinfo:16 dh_installinit:16 dh_installlogcheck:16 dh_installlogrotate:16 dh_installman:17 dh_installmanpages:17 dh_installmenu:16 dh_installmime:16 dh_installmodules:18 dh_installpam:16 dh_installppp:16 dh_installudev:17 dh_installwm:16 dh_installxfonts:16 dh_link:17 dh_lintian:16 dh_listpackages:16 dh_makeshlibs:16 dh_md5sums:17 dh_movefiles:16 dh_perl:18 dh_prep:16 dh_python:17 dh_scrollkeeper:16 dh_shlibdeps:17 dh_strip:17 dh_suidregister:11 dh_testdir:16 dh_testroot:11 dh_undocumented:16 dh_usrlocal:19 msgid "DESCRIPTION" msgstr "" @@ -203,7 +203,7 @@ msgid "Verbose mode: show all commands that modify the package build directory." msgstr "" #. type: =item -#: debhelper.pod:101 dh:76 +#: debhelper.pod:101 dh:56 msgid "B<--no-act>" msgstr "" @@ -602,7 +602,7 @@ msgid "This mode works like v2, with the following additions:" msgstr "" #. type: =item -#: debhelper.pod:300 debhelper.pod:305 debhelper.pod:309 debhelper.pod:323 debhelper.pod:328 debhelper.pod:333 debhelper.pod:338 debhelper.pod:352 debhelper.pod:356 debhelper.pod:361 debhelper.pod:365 debhelper.pod:377 debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:407 debhelper.pod:414 debhelper.pod:418 debhelper.pod:422 debhelper.pod:437 debhelper.pod:441 debhelper.pod:449 debhelper.pod:454 debhelper.pod:468 debhelper.pod:473 debhelper.pod:479 debhelper.pod:484 debhelper.pod:488 +#: debhelper.pod:300 debhelper.pod:305 debhelper.pod:309 debhelper.pod:323 debhelper.pod:328 debhelper.pod:333 debhelper.pod:338 debhelper.pod:352 debhelper.pod:356 debhelper.pod:361 debhelper.pod:365 debhelper.pod:377 debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:407 debhelper.pod:414 debhelper.pod:418 debhelper.pod:422 debhelper.pod:437 debhelper.pod:441 debhelper.pod:449 debhelper.pod:454 debhelper.pod:468 debhelper.pod:473 debhelper.pod:480 debhelper.pod:485 debhelper.pod:489 msgid "-" msgstr "" @@ -843,25 +843,26 @@ msgstr "" #. type: textblock #: debhelper.pod:475 msgid "" -"dh allows defining custom build, build-arch, and build-indep targets in " -"debian/rules, without needing to manually define the other targets that " -"depend on them." +"dh is aware of the usual dependencies between targets in debian/rules. So, " +"\"dh binary\" will run any build, build-arch, build-indep, install, etc " +"targets that exist in the rules file. There's no need to define an explicit " +"binary target with explicit dependencies on the other targets." msgstr "" #. type: textblock -#: debhelper.pod:481 +#: debhelper.pod:482 msgid "" "B does not include the source package name in " "--libexecdir when using autoconf." msgstr "" #. type: textblock -#: debhelper.pod:486 +#: debhelper.pod:487 msgid "B does not default to enabling --with=python-support" msgstr "" #. type: textblock -#: debhelper.pod:490 +#: debhelper.pod:491 msgid "" "All of the BI<*> debhelper programs and B set environment " "variables listed by B, unless they are already set. They " @@ -869,17 +870,17 @@ msgid "" msgstr "" #. type: =head1 -#: debhelper.pod:498 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116 dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 dh_usrlocal:49 +#: debhelper.pod:499 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116 dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 dh_usrlocal:49 msgid "NOTES" msgstr "" #. type: =head2 -#: debhelper.pod:500 +#: debhelper.pod:501 msgid "Multiple binary package support" msgstr "" #. type: textblock -#: debhelper.pod:502 +#: debhelper.pod:503 msgid "" "If your source package generates more than one binary package, debhelper " "programs will default to acting on all binary packages when run. If your " @@ -891,7 +892,7 @@ msgid "" msgstr "" #. type: textblock -#: debhelper.pod:510 +#: debhelper.pod:511 msgid "" "To facilitate this, as well as give you more control over which packages are " "acted on by debhelper programs, all debhelper programs accept the B<-a>, " @@ -901,12 +902,12 @@ msgid "" msgstr "" #. type: =head2 -#: debhelper.pod:516 +#: debhelper.pod:517 msgid "Automatic generation of Debian install scripts" msgstr "" #. type: textblock -#: debhelper.pod:518 +#: debhelper.pod:519 msgid "" "Some debhelper commands will automatically generate parts of Debian " "maintainer scripts. If you want these automatically generated things " @@ -917,21 +918,21 @@ msgid "" msgstr "" #. type: textblock -#: debhelper.pod:525 +#: debhelper.pod:526 msgid "" "If a script does not exist at all and debhelper needs to add something to " "it, then debhelper will create the complete script." msgstr "" #. type: textblock -#: debhelper.pod:528 +#: debhelper.pod:529 msgid "" "All debhelper commands that automatically generate code in this way let it " "be disabled by the -n parameter (see above)." msgstr "" #. type: textblock -#: debhelper.pod:531 +#: debhelper.pod:532 msgid "" "Note that the inserted code will be shell code, so you cannot directly use " "it in a Perl script. If you would like to embed it into a Perl script, here " @@ -940,7 +941,7 @@ msgid "" msgstr "" #. type: verbatim -#: debhelper.pod:536 +#: debhelper.pod:537 #, no-wrap msgid "" " my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n" @@ -952,12 +953,12 @@ msgid "" msgstr "" #. type: =head2 -#: debhelper.pod:542 +#: debhelper.pod:543 msgid "Automatic generation of miscellaneous dependencies." msgstr "" #. type: textblock -#: debhelper.pod:544 +#: debhelper.pod:545 msgid "" "Some debhelper commands may make the generated package need to depend on " "some other packages. For example, if you use L, your " @@ -969,7 +970,7 @@ msgid "" msgstr "" #. type: textblock -#: debhelper.pod:552 +#: debhelper.pod:553 msgid "" "All commands of this type, besides documenting what dependencies may be " "needed on their man pages, will automatically generate a substvar called " @@ -978,7 +979,7 @@ msgid "" msgstr "" #. type: textblock -#: debhelper.pod:557 +#: debhelper.pod:558 msgid "" "This is entirely independent of the standard B<${shlibs:Depends}> generated " "by L, and the B<${perl:Depends}> generated by " @@ -987,19 +988,19 @@ msgid "" msgstr "" #. type: =head2 -#: debhelper.pod:562 +#: debhelper.pod:563 msgid "Package build directories" msgstr "" #. type: textblock -#: debhelper.pod:564 +#: debhelper.pod:565 msgid "" "By default, all debhelper programs assume that the temporary directory used " "for assembling the tree of files in a package is debian/I." msgstr "" #. type: textblock -#: debhelper.pod:567 +#: debhelper.pod:568 msgid "" "Sometimes, you might want to use some other temporary directory. This is " "supported by the B<-P> flag. For example, \"B\" to the package's stanza in F, and " @@ -1027,12 +1028,12 @@ msgid "" msgstr "" #. type: =head2 -#: debhelper.pod:584 +#: debhelper.pod:585 msgid "Build depends" msgstr "" #. type: textblock -#: debhelper.pod:586 +#: debhelper.pod:587 msgid "" "Once your package uses debhelper to build, be sure to add debhelper to your " "Build-Depends line in F. You should build-depend on a " @@ -1041,7 +1042,7 @@ msgid "" msgstr "" #. type: verbatim -#: debhelper.pod:592 +#: debhelper.pod:593 #, no-wrap msgid "" " Build-Depends: debhelper (>= 7)\n" @@ -1049,51 +1050,51 @@ msgid "" msgstr "" #. type: =head1 -#: debhelper.pod:594 +#: debhelper.pod:595 msgid "ENVIRONMENT" msgstr "" #. type: =item -#: debhelper.pod:598 +#: debhelper.pod:599 msgid "B" msgstr "" #. type: textblock -#: debhelper.pod:600 +#: debhelper.pod:601 msgid "" "Set to B<1> to enable verbose mode. Debhelper will output every command it " "runs that modifies files on the build system." msgstr "" #. type: =item -#: debhelper.pod:603 +#: debhelper.pod:604 msgid "B" msgstr "" #. type: textblock -#: debhelper.pod:605 +#: debhelper.pod:606 msgid "" "Temporarily specifies what compatibility level debhelper should run at, " "overriding any value in F." msgstr "" #. type: =item -#: debhelper.pod:608 +#: debhelper.pod:609 msgid "B" msgstr "" #. type: textblock -#: debhelper.pod:610 +#: debhelper.pod:611 msgid "Set to B<1> to enable no-act mode." msgstr "" #. type: =item -#: debhelper.pod:612 +#: debhelper.pod:613 msgid "B" msgstr "" #. type: textblock -#: debhelper.pod:614 +#: debhelper.pod:615 msgid "" "Anything in this variable will be prepended to the command line arguments of " "all debhelper commands. Command-specific options will be ignored by commands " @@ -1101,7 +1102,7 @@ msgid "" msgstr "" #. type: textblock -#: debhelper.pod:618 +#: debhelper.pod:619 msgid "" "This is useful in some situations, for example, if you need to pass B<-p> to " "all debhelper commands that will be run. One good way to set B " @@ -1110,12 +1111,12 @@ msgid "" msgstr "" #. type: =item -#: debhelper.pod:623 +#: debhelper.pod:624 msgid "B" msgstr "" #. type: textblock -#: debhelper.pod:625 +#: debhelper.pod:626 msgid "" "If set, this adds the value the variable is set to to the B<-X> options of " "all commands that support the B<-X> option. Moreover, B will " @@ -1123,7 +1124,7 @@ msgid "" msgstr "" #. type: textblock -#: debhelper.pod:629 +#: debhelper.pod:630 msgid "" "This can be useful if you are doing a build from a CVS source tree, in which " "case setting B will prevent any CVS directories from " @@ -1134,44 +1135,44 @@ msgid "" msgstr "" #. type: textblock -#: debhelper.pod:636 +#: debhelper.pod:637 msgid "" "Multiple things to exclude can be separated with colons, as in " "B" msgstr "" #. type: =head1 -#: debhelper.pod:641 dh:866 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122 dh_builddeb:123 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:258 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114 +#: debhelper.pod:642 dh:858 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122 dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:259 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114 msgid "SEE ALSO" msgstr "" #. type: =item -#: debhelper.pod:645 +#: debhelper.pod:646 msgid "F" msgstr "" #. type: textblock -#: debhelper.pod:647 +#: debhelper.pod:648 msgid "A set of example F files that use debhelper." msgstr "" #. type: =item -#: debhelper.pod:649 +#: debhelper.pod:650 msgid "L" msgstr "" #. type: textblock -#: debhelper.pod:651 +#: debhelper.pod:652 msgid "Debhelper web site." msgstr "" #. type: =head1 -#: debhelper.pod:655 dh:872 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130 dh_builddeb:129 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82 dh_installlogrotate:56 dh_installman:264 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120 +#: debhelper.pod:656 dh:864 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130 dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82 dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120 msgid "AUTHOR" msgstr "" #. type: textblock -#: debhelper.pod:657 dh:874 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:131 dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90 dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:266 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36 +#: debhelper.pod:658 dh:866 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128 dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90 dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:267 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36 msgid "Joey Hess " msgstr "" @@ -1184,8 +1185,7 @@ msgstr "" #: dh:14 msgid "" "B I [B<--with> I[B<,>I ...]] [B<--list>] " -"[B<--until> I] [B<--before> I] [B<--after> I] " -"[B<--remaining>] [S>]" +"[S>]" msgstr "" #. type: textblock @@ -1219,7 +1219,7 @@ msgid "" msgstr "" #. type: =head1 -#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31 dh_auto_install:43 dh_auto_test:30 dh_bugfiles:50 dh_builddeb:21 dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26 dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56 dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66 dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39 dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42 dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40 dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31 dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51 dh_makeshlibs:43 dh_md5sums:28 dh_movefiles:38 dh_perl:31 dh_prep:26 dh_python:39 dh_shlibdeps:26 dh_strip:35 dh_testdir:23 dh_usrlocal:39 +#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31 dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21 dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26 dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56 dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66 dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39 dh_installinfo:31 dh_installinit:48 dh_installlogcheck:40 dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40 dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31 dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51 dh_makeshlibs:43 dh_md5sums:28 dh_movefiles:38 dh_perl:31 dh_prep:26 dh_python:39 dh_shlibdeps:26 dh_strip:35 dh_testdir:23 dh_usrlocal:39 msgid "OPTIONS" msgstr "" @@ -1254,84 +1254,33 @@ msgstr "" msgid "List all available addons." msgstr "" -#. type: =item -#: dh:56 -msgid "B<--until> I" -msgstr "" - #. type: textblock #: dh:58 -msgid "" -"Run commands in the sequence until and including I, then stop. " -"(Deprecated)" -msgstr "" - -#. type: =item -#: dh:61 -msgid "B<--before> I" -msgstr "" - -#. type: textblock -#: dh:63 -msgid "Run commands in the sequence before I, then stop. (Deprecated)" -msgstr "" - -#. type: =item -#: dh:66 -msgid "B<--after> I" -msgstr "" - -#. type: textblock -#: dh:68 -msgid "Run commands in the sequence that come after I. (Deprecated)" -msgstr "" - -#. type: =item -#: dh:71 -msgid "B<--remaining>" -msgstr "" - -#. type: textblock -#: dh:73 -msgid "Run all commands in the sequence that have yet to be run. (Deprecated)" -msgstr "" - -#. type: textblock -#: dh:78 msgid "Prints commands that would run for a given sequence, but does not run them." msgstr "" #. type: textblock -#: dh:82 -msgid "" -"All other options passed to B are passed on to each command it " -"runs. This can be used to set an option like B<-v> or B<-X> or B<-N>, as " -"well as for more specialised options." -msgstr "" - -#. type: textblock -#: dh:86 +#: dh:62 msgid "" -"In the above options, I can be a full name of a debhelper command, or a " -"substring. It'll first search for a command in the sequence exactly matching " -"the name, to avoid any ambiguity. If there are multiple substring matches, " -"the last one in the sequence will be used." +"Other options passed to B are passed on to each command it runs. This " +"can be used to set an option like B<-v> or B<-X> or B<-N>, as well as for " +"more specialised options." msgstr "" #. type: =head1 -#: dh:117 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69 +#: dh:66 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69 msgid "EXAMPLES" msgstr "" #. type: textblock -#: dh:119 +#: dh:68 msgid "" "To see what commands are included in a sequence, without actually doing " "anything:" msgstr "" #. type: verbatim -#: dh:122 +#: dh:71 #, no-wrap msgid "" "\tdh binary-arch --no-act\n" @@ -1339,14 +1288,14 @@ msgid "" msgstr "" #. type: textblock -#: dh:124 +#: dh:73 msgid "" "This is a very simple rules file, for packages where the default sequences " "of commands work with no additional options." msgstr "" #. type: verbatim -#: dh:127 dh:134 dh:148 dh:161 +#: dh:76 dh:83 dh:97 dh:110 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -1356,7 +1305,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:131 +#: dh:80 #, no-wrap msgid "" "Often you'll want to pass an option to a specific debhelper command. The\n" @@ -1365,7 +1314,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:138 +#: dh:87 #, no-wrap msgid "" "\toverride_dh_strip:\n" @@ -1374,7 +1323,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:141 +#: dh:90 #, no-wrap msgid "" "\toverride_dh_installdocs:\n" @@ -1383,7 +1332,7 @@ msgid "" msgstr "" #. type: textblock -#: dh:144 +#: dh:93 msgid "" "Sometimes the automated L and L " "can't guess what to do for a strange package. Here's how to avoid running " @@ -1391,7 +1340,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:152 +#: dh:101 #, no-wrap msgid "" "\toverride_dh_auto_configure:\n" @@ -1400,7 +1349,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:155 +#: dh:104 #, no-wrap msgid "" "\toverride_dh_auto_build:\n" @@ -1409,14 +1358,14 @@ msgid "" msgstr "" #. type: textblock -#: dh:158 +#: dh:107 msgid "" "Another common case is wanting to do something manually before or after a " "particular debhelper command is run." msgstr "" #. type: verbatim -#: dh:165 +#: dh:114 #, no-wrap msgid "" "\toverride_dh_fixperms:\n" @@ -1426,7 +1375,7 @@ msgid "" msgstr "" #. type: textblock -#: dh:169 +#: dh:118 msgid "" "Python tools are not run by dh by default, due to the continual change in " "that area. (Before compatability level v9, dh does run B.) " @@ -1434,7 +1383,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:173 +#: dh:122 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -1444,7 +1393,7 @@ msgid "" msgstr "" #. type: textblock -#: dh:177 +#: dh:126 msgid "" "If your package uses autotools and you want to freshen F and " "F with newer versions from the B package at " @@ -1453,7 +1402,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:182 +#: dh:131 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -1463,14 +1412,14 @@ msgid "" msgstr "" #. type: textblock -#: dh:186 +#: dh:135 msgid "" "Here is how to force use of Perl's B build system, which can " "be necessary if debhelper wrongly detects that the package uses MakeMaker." msgstr "" #. type: verbatim -#: dh:190 +#: dh:139 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -1479,27 +1428,8 @@ msgid "" "\n" msgstr "" -#. type: verbatim -#: dh:194 -#, no-wrap -msgid "" -"To patch your package using quilt, you can tell B to use quilt's B\n" -"sequence addons like this:\n" -"\t\n" -msgstr "" - -#. type: verbatim -#: dh:197 -#, no-wrap -msgid "" -"\t#!/usr/bin/make -f\n" -"\t%:\n" -"\t\tdh $@ --with quilt\n" -"\n" -msgstr "" - #. type: textblock -#: dh:201 +#: dh:143 msgid "" "Here is an example of overriding where the BI<*> commands find the " "package's source, for a package where the source is located in a " @@ -1507,7 +1437,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:205 +#: dh:147 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -1517,14 +1447,14 @@ msgid "" msgstr "" #. type: textblock -#: dh:209 +#: dh:151 msgid "" "And here is an example of how to tell the BI<*> commands to build " "in a subdirectory, which will be removed on B." msgstr "" #. type: verbatim -#: dh:212 +#: dh:154 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -1534,14 +1464,14 @@ msgid "" msgstr "" #. type: textblock -#: dh:216 +#: dh:158 msgid "" "If your package can be built in parallel, you can support parallel building " "as follows. Then B will work." msgstr "" #. type: verbatim -#: dh:219 +#: dh:161 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -1551,14 +1481,14 @@ msgid "" msgstr "" #. type: textblock -#: dh:223 +#: dh:165 msgid "" "Here is a way to prevent B from running several commands that you don't " "want it to run, by defining empty override targets for each command." msgstr "" #. type: verbatim -#: dh:226 dh:237 dh:254 +#: dh:168 dh:179 dh:196 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -1568,7 +1498,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:230 +#: dh:172 #, no-wrap msgid "" "\t# Commands not to run:\n" @@ -1577,7 +1507,7 @@ msgid "" msgstr "" #. type: textblock -#: dh:233 +#: dh:175 msgid "" "Sometimes, you may need to make an override target only run commands when a " "particular package is being built. This can be accomplished using " @@ -1585,7 +1515,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:241 +#: dh:183 #, no-wrap msgid "" "\toverride_dh_fixperms:\n" @@ -1597,7 +1527,7 @@ msgid "" msgstr "" #. type: textblock -#: dh:247 +#: dh:189 msgid "" "Finally, remember that you are not limited to using override targets in the " "rules file when using B. You can also explicitly define any of the " @@ -1608,7 +1538,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:258 +#: dh:200 #, no-wrap msgid "" "\tbuild-indep:\n" @@ -1619,7 +1549,7 @@ msgid "" msgstr "" #. type: textblock -#: dh:263 +#: dh:205 msgid "" "Note that in the example above, dh will arrange for \"debian/rules build\" " "to call your build-indep and build-arch targets. You do not need to " @@ -1629,19 +1559,19 @@ msgid "" msgstr "" #. type: =head1 -#: dh:269 +#: dh:211 msgid "INTERNALS" msgstr "" #. type: textblock -#: dh:271 +#: dh:213 msgid "" "If you're curious about B's internals, here's how it works under the " "hood." msgstr "" #. type: textblock -#: dh:273 +#: dh:215 msgid "" "Each debhelper command will record when it's successfully run in " "F. (Which B deletes.) So B can " @@ -1650,7 +1580,7 @@ msgid "" msgstr "" #. type: textblock -#: dh:278 +#: dh:220 msgid "" "Each time B is run, it examines the log, and finds the last logged " "command that is in the specified sequence. It then continues with the next " @@ -1659,14 +1589,14 @@ msgid "" msgstr "" #. type: textblock -#: dh:283 +#: dh:225 msgid "" "A sequence can also run dependent targets in debian/rules. For example, the " "\"binary\" sequence runs the \"install\" target." msgstr "" #. type: textblock -#: dh:286 +#: dh:228 msgid "" "B uses the B environment variable to pass " "information through to debhelper commands that are run inside override " @@ -1674,13 +1604,74 @@ msgid "" "as the name might suggest, is subject to change at any time." msgstr "" +#. type: =head1 +#: dh:233 +msgid "DEPRECATED OPTIONS" +msgstr "" + +#. type: textblock +#: dh:235 +msgid "" +"The following options are deprecated. It's much better to use override " +"targets instead." +msgstr "" + +#. type: =item +#: dh:240 +msgid "B<--until> I" +msgstr "" + +#. type: textblock +#: dh:242 +msgid "Run commands in the sequence until and including I, then stop." +msgstr "" + +#. type: =item +#: dh:244 +msgid "B<--before> I" +msgstr "" + +#. type: textblock +#: dh:246 +msgid "Run commands in the sequence before I, then stop." +msgstr "" + +#. type: =item +#: dh:248 +msgid "B<--after> I" +msgstr "" + +#. type: textblock +#: dh:250 +msgid "Run commands in the sequence that come after I." +msgstr "" + +#. type: =item +#: dh:252 +msgid "B<--remaining>" +msgstr "" + +#. type: textblock +#: dh:254 +msgid "Run all commands in the sequence that have yet to be run." +msgstr "" + +#. type: textblock +#: dh:258 +msgid "" +"In the above options, I can be a full name of a debhelper command, or a " +"substring. It'll first search for a command in the sequence exactly matching " +"the name, to avoid any ambiguity. If there are multiple substring matches, " +"the last one in the sequence will be used." +msgstr "" + #. type: textblock -#: dh:868 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 dh_auto_install:87 dh_auto_test:60 dh_builddeb:125 dh_clean:144 dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:260 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116 +#: dh:860 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144 dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:261 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116 msgid "L" msgstr "" #. type: textblock -#: dh:870 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:127 dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118 +#: dh:862 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124 dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:263 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118 msgid "This program is a part of debhelper." msgstr "" @@ -1715,14 +1706,14 @@ msgid "" msgstr "" #. type: textblock -#: dh_auto_build:30 dh_auto_clean:32 dh_auto_configure:33 dh_auto_install:45 dh_auto_test:32 +#: dh_auto_build:30 dh_auto_clean:32 dh_auto_configure:33 dh_auto_install:45 dh_auto_test:33 msgid "" "See L> for a list of common build " "system selection and control options." msgstr "" #. type: =item -#: dh_auto_build:35 dh_auto_clean:37 dh_auto_configure:38 dh_auto_install:56 dh_auto_test:37 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69 dh_installinit:99 dh_makeshlibs:91 dh_shlibdeps:37 +#: dh_auto_build:35 dh_auto_clean:37 dh_auto_configure:38 dh_auto_install:56 dh_auto_test:38 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69 dh_installinit:99 dh_makeshlibs:91 dh_shlibdeps:37 msgid "B<--> I" msgstr "" @@ -1898,14 +1889,14 @@ msgid "dh_auto_test - automatically runs a package's test suites" msgstr "" #. type: textblock -#: dh_auto_test:14 +#: dh_auto_test:15 msgid "" "B [S>] [S>] " "[S I>]" msgstr "" #. type: textblock -#: dh_auto_test:18 +#: dh_auto_test:19 msgid "" "B is a debhelper program that tries to automatically run a " "package's test suite. It does so by running the appropriate command for the " @@ -1917,7 +1908,7 @@ msgid "" msgstr "" #. type: textblock -#: dh_auto_test:26 +#: dh_auto_test:27 msgid "" "This is intended to work for about 90% of packages with a test suite. If it " "doesn't work, you're encouraged to skip using B at all, and " @@ -1925,14 +1916,14 @@ msgid "" msgstr "" #. type: textblock -#: dh_auto_test:39 +#: dh_auto_test:40 msgid "" "Pass I to the program that is run. These can be used to supplement " "or override the any standard parameters that B passes." msgstr "" #. type: textblock -#: dh_auto_test:46 +#: dh_auto_test:47 msgid "" "If the B environment variable contains B, no " "tests will be performed." @@ -2969,7 +2960,7 @@ msgid "" msgstr "" #. type: =item -#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104 dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52 dh_installpam:35 dh_installppp:39 dh_installudev:39 +#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104 dh_installlogcheck:44 dh_installlogrotate:26 dh_installmodules:52 dh_installpam:35 dh_installppp:39 dh_installudev:39 msgid "B<--name=>I" msgstr "" @@ -3932,7 +3923,7 @@ msgid "" msgstr "" #. type: textblock -#: dh_installlogcheck:48 +#: dh_installlogcheck:46 msgid "" "Look for files named F and install them into " "the corresponding subdirectories of F, but use the specified " diff --git a/man/po4a/po/es.po b/man/po4a/po/es.po index 3054902e..39b147e2 100644 --- a/man/po4a/po/es.po +++ b/man/po4a/po/es.po @@ -31,7 +31,7 @@ msgid "" msgstr "" "Project-Id-Version: debhelper 8.0.0\n" -"POT-Creation-Date: 2011-08-23 15:26-0400\n" +"POT-Creation-Date: 2011-09-10 18:35-0400\n" "PO-Revision-Date: 2010-11-11 22:28+0100\n" "Last-Translator: Omar Campagne \n" "Language-Team: Debian l10n Spanish \n" @@ -70,7 +70,7 @@ msgstr "debhelper - El conjunto de herramientas debhelper" # type: =head1 #. type: =head1 #: debhelper.pod:5 dh:12 dh_auto_build:12 dh_auto_clean:13 -#: dh_auto_configure:12 dh_auto_install:15 dh_auto_test:12 dh_bugfiles:12 +#: dh_auto_configure:12 dh_auto_install:15 dh_auto_test:13 dh_bugfiles:12 #: dh_builddeb:12 dh_clean:12 dh_compress:13 dh_desktop:12 dh_fixperms:12 #: dh_gconf:12 dh_gencontrol:12 dh_icons:13 dh_install:13 #: dh_installcatalogs:14 dh_installchangelogs:12 dh_installcron:12 @@ -100,7 +100,7 @@ msgstr "" # type: =head1 #. type: =head1 #: debhelper.pod:9 dh:16 dh_auto_build:16 dh_auto_clean:17 -#: dh_auto_configure:16 dh_auto_install:19 dh_auto_test:16 dh_bugfiles:16 +#: dh_auto_configure:16 dh_auto_install:19 dh_auto_test:17 dh_bugfiles:16 #: dh_builddeb:16 dh_clean:16 dh_compress:17 dh_desktop:16 dh_fixperms:16 #: dh_gconf:16 dh_gencontrol:16 dh_icons:17 dh_install:17 #: dh_installcatalogs:18 dh_installchangelogs:16 dh_installcron:16 @@ -358,7 +358,7 @@ msgstr "" # type: =item #. type: =item -#: debhelper.pod:101 dh:76 +#: debhelper.pod:101 dh:56 msgid "B<--no-act>" msgstr "B<--no-act>" @@ -911,7 +911,7 @@ msgstr "Este modo funciona como v2, con los siguientes añadidos:" #: debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:407 #: debhelper.pod:414 debhelper.pod:418 debhelper.pod:422 debhelper.pod:437 #: debhelper.pod:441 debhelper.pod:449 debhelper.pod:454 debhelper.pod:468 -#: debhelper.pod:473 debhelper.pod:479 debhelper.pod:484 debhelper.pod:488 +#: debhelper.pod:473 debhelper.pod:480 debhelper.pod:485 debhelper.pod:489 msgid "-" msgstr "-" @@ -1227,25 +1227,26 @@ msgstr "" #. type: textblock #: debhelper.pod:475 msgid "" -"dh allows defining custom build, build-arch, and build-indep targets in " -"debian/rules, without needing to manually define the other targets that " -"depend on them." +"dh is aware of the usual dependencies between targets in debian/rules. So, " +"\"dh binary\" will run any build, build-arch, build-indep, install, etc " +"targets that exist in the rules file. There's no need to define an explicit " +"binary target with explicit dependencies on the other targets." msgstr "" #. type: textblock -#: debhelper.pod:481 +#: debhelper.pod:482 msgid "" "B does not include the source package name in --" "libexecdir when using autoconf." msgstr "" #. type: textblock -#: debhelper.pod:486 +#: debhelper.pod:487 msgid "B does not default to enabling --with=python-support" msgstr "" #. type: textblock -#: debhelper.pod:490 +#: debhelper.pod:491 msgid "" "All of the BI<*> debhelper programs and B set environment " "variables listed by B, unless they are already set. They " @@ -1254,7 +1255,7 @@ msgstr "" # type: =head1 #. type: =head1 -#: debhelper.pod:498 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116 +#: debhelper.pod:499 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116 #: dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 #: dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 #: dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 @@ -1264,13 +1265,13 @@ msgstr "NOTAS" # type: =head2 #. type: =head2 -#: debhelper.pod:500 +#: debhelper.pod:501 msgid "Multiple binary package support" msgstr "Compatibilidad con varios paquetes binarios" # type: textblock #. type: textblock -#: debhelper.pod:502 +#: debhelper.pod:503 msgid "" "If your source package generates more than one binary package, debhelper " "programs will default to acting on all binary packages when run. If your " @@ -1291,7 +1292,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:510 +#: debhelper.pod:511 msgid "" "To facilitate this, as well as give you more control over which packages are " "acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-" @@ -1307,13 +1308,13 @@ msgstr "" # type: =head2 #. type: =head2 -#: debhelper.pod:516 +#: debhelper.pod:517 msgid "Automatic generation of Debian install scripts" msgstr "Generación automática de los scripts de instalación de Debian" # type: textblock #. type: textblock -#: debhelper.pod:518 +#: debhelper.pod:519 msgid "" "Some debhelper commands will automatically generate parts of Debian " "maintainer scripts. If you want these automatically generated things " @@ -1331,7 +1332,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:525 +#: debhelper.pod:526 msgid "" "If a script does not exist at all and debhelper needs to add something to " "it, then debhelper will create the complete script." @@ -1341,7 +1342,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:528 +#: debhelper.pod:529 msgid "" "All debhelper commands that automatically generate code in this way let it " "be disabled by the -n parameter (see above)." @@ -1351,7 +1352,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:531 +#: debhelper.pod:532 msgid "" "Note that the inserted code will be shell code, so you cannot directly use " "it in a Perl script. If you would like to embed it into a Perl script, here " @@ -1365,7 +1366,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: debhelper.pod:536 +#: debhelper.pod:537 #, no-wrap msgid "" " my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n" @@ -1384,13 +1385,13 @@ msgstr "" # type: =head2 #. type: =head2 -#: debhelper.pod:542 +#: debhelper.pod:543 msgid "Automatic generation of miscellaneous dependencies." msgstr "Generación automática de diversas dependencias." # type: textblock #. type: textblock -#: debhelper.pod:544 +#: debhelper.pod:545 #, fuzzy #| msgid "" #| "Some debhelper commands may make the generated package need to depend on " @@ -1418,7 +1419,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:552 +#: debhelper.pod:553 msgid "" "All commands of this type, besides documenting what dependencies may be " "needed on their man pages, will automatically generate a substvar called B<" @@ -1433,7 +1434,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:557 +#: debhelper.pod:558 msgid "" "This is entirely independent of the standard B<${shlibs:Depends}> generated " "by L, and the B<${perl:Depends}> generated by L." @@ -1464,7 +1465,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:567 +#: debhelper.pod:568 msgid "" "Sometimes, you might want to use some other temporary directory. This is " "supported by the B<-P> flag. For example, \"B" @@ -1484,13 +1485,13 @@ msgstr "" # type: =head2 #. type: =head2 -#: debhelper.pod:575 +#: debhelper.pod:576 msgid "udebs" msgstr "udebs" # type: textblock #. type: textblock -#: debhelper.pod:577 +#: debhelper.pod:578 msgid "" "Debhelper includes support for udebs. To create a udeb with debhelper, add " "\"B\" to the package's stanza in F, and " @@ -1508,13 +1509,13 @@ msgstr "" "F, F, F, scripts F, etc." #. type: =head2 -#: debhelper.pod:584 +#: debhelper.pod:585 msgid "Build depends" msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:586 +#: debhelper.pod:587 msgid "" "Once your package uses debhelper to build, be sure to add debhelper to your " "Build-Depends line in F. You should build-depend on a " @@ -1529,7 +1530,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: debhelper.pod:592 +#: debhelper.pod:593 #, no-wrap msgid "" " Build-Depends: debhelper (>= 7)\n" @@ -1540,19 +1541,19 @@ msgstr "" # type: =head1 #. type: =head1 -#: debhelper.pod:594 +#: debhelper.pod:595 msgid "ENVIRONMENT" msgstr "ENTORNO" # type: =item #. type: =item -#: debhelper.pod:598 +#: debhelper.pod:599 msgid "B" msgstr "B" # type: textblock #. type: textblock -#: debhelper.pod:600 +#: debhelper.pod:601 msgid "" "Set to B<1> to enable verbose mode. Debhelper will output every command it " "runs that modifies files on the build system." @@ -1563,13 +1564,13 @@ msgstr "" # type: =item #. type: =item -#: debhelper.pod:603 +#: debhelper.pod:604 msgid "B" msgstr "B" # type: textblock #. type: textblock -#: debhelper.pod:605 +#: debhelper.pod:606 msgid "" "Temporarily specifies what compatibility level debhelper should run at, " "overriding any value in F." @@ -1579,25 +1580,25 @@ msgstr "" # type: =item #. type: =item -#: debhelper.pod:608 +#: debhelper.pod:609 msgid "B" msgstr "B" # type: textblock #. type: textblock -#: debhelper.pod:610 +#: debhelper.pod:611 msgid "Set to B<1> to enable no-act mode." msgstr "Defina como B<1> para habilitar el modo no-act." # type: =item #. type: =item -#: debhelper.pod:612 +#: debhelper.pod:613 msgid "B" msgstr "B" # type: textblock #. type: textblock -#: debhelper.pod:614 +#: debhelper.pod:615 msgid "" "Anything in this variable will be prepended to the command line arguments of " "all debhelper commands. Command-specific options will be ignored by commands " @@ -1609,7 +1610,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:618 +#: debhelper.pod:619 msgid "" "This is useful in some situations, for example, if you need to pass B<-p> to " "all debhelper commands that will be run. One good way to set B " @@ -1624,13 +1625,13 @@ msgstr "" # type: =item #. type: =item -#: debhelper.pod:623 +#: debhelper.pod:624 msgid "B" msgstr "B" # type: textblock #. type: textblock -#: debhelper.pod:625 +#: debhelper.pod:626 msgid "" "If set, this adds the value the variable is set to to the B<-X> options of " "all commands that support the B<-X> option. Moreover, B will " @@ -1642,7 +1643,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:629 +#: debhelper.pod:630 msgid "" "This can be useful if you are doing a build from a CVS source tree, in which " "case setting B will prevent any CVS directories from " @@ -1660,7 +1661,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:636 +#: debhelper.pod:637 msgid "" "Multiple things to exclude can be separated with colons, as in " "B" @@ -1670,15 +1671,15 @@ msgstr "" # type: =head1 #. type: =head1 -#: debhelper.pod:641 dh:866 dh_auto_build:47 dh_auto_clean:50 -#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122 -#: dh_builddeb:123 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 +#: debhelper.pod:642 dh:858 dh_auto_build:47 dh_auto_clean:50 +#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122 +#: dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 #: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 #: dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 #: dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 #: dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 #: dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 -#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:258 +#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:259 #: dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 #: dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 #: dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 @@ -1691,39 +1692,39 @@ msgstr "VÉASE TAMBIÉN" # type: =item #. type: =item -#: debhelper.pod:645 +#: debhelper.pod:646 msgid "F" msgstr "F" # type: textblock #. type: textblock -#: debhelper.pod:647 +#: debhelper.pod:648 msgid "A set of example F files that use debhelper." msgstr "Varios ficheros de ejemplo F que usan debhelper." # type: =item #. type: =item -#: debhelper.pod:649 +#: debhelper.pod:650 msgid "L" msgstr "L" # type: textblock #. type: textblock -#: debhelper.pod:651 +#: debhelper.pod:652 msgid "Debhelper web site." msgstr "Sitio web de Debhelper." # type: =head1 #. type: =head1 -#: debhelper.pod:655 dh:872 dh_auto_build:53 dh_auto_clean:56 -#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130 -#: dh_builddeb:129 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 +#: debhelper.pod:656 dh:864 dh_auto_build:53 dh_auto_clean:56 +#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130 +#: dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 #: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 #: dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 #: dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 #: dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 #: dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82 -#: dh_installlogrotate:56 dh_installman:264 dh_installmanpages:203 +#: dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203 #: dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 #: dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 #: dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 @@ -1735,14 +1736,14 @@ msgstr "AUTOR" # type: textblock #. type: textblock -#: debhelper.pod:657 dh:874 dh_auto_build:55 dh_auto_clean:58 -#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:131 +#: debhelper.pod:658 dh:866 dh_auto_build:55 dh_auto_clean:58 +#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128 #: dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90 #: dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 #: dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 #: dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 #: dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 -#: dh_installman:266 dh_installmanpages:205 dh_installmenu:97 +#: dh_installman:267 dh_installmanpages:205 dh_installmenu:97 #: dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 #: dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 #: dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 @@ -1758,9 +1759,13 @@ msgstr "dh - Secuenciador de órdenes de debhelper" #. type: textblock #: dh:14 +#, fuzzy +#| msgid "" +#| "B I [B<--with> I[B<,>I ...]] [B<--list>] [B<--" +#| "until> I] [B<--before> I] [B<--after> I] [B<--remaining>] " +#| "[S>]" msgid "" -"B I [B<--with> I[B<,>I ...]] [B<--list>] [B<--" -"until> I] [B<--before> I] [B<--after> I] [B<--remaining>] " +"B I [B<--with> I[B<,>I ...]] [B<--list>] " "[S>]" msgstr "" "B I [B<--with> I[,I,...]] [B<--list>] " @@ -1825,12 +1830,12 @@ msgstr "" # type: =head1 #. type: =head1 #: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31 -#: dh_auto_install:43 dh_auto_test:30 dh_bugfiles:50 dh_builddeb:21 +#: dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21 #: dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26 #: dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56 #: dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66 #: dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39 -#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42 +#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:40 #: dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40 #: dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31 #: dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51 @@ -1877,63 +1882,8 @@ msgstr "Lo contrario de B<--with>, desactiva la extensión dada." msgid "List all available addons." msgstr "Lista todas las extensiones disponibles." -# type: =item -#. type: =item -#: dh:56 -msgid "B<--until> I" -msgstr "B<--until> I" - #. type: textblock #: dh:58 -#, fuzzy -#| msgid "Run commands in the sequence until and including I, then stop." -msgid "" -"Run commands in the sequence until and including I, then stop. " -"(Deprecated)" -msgstr "" -"Ejecuta las órdenes en la secuencia hasta la I, inclusive, y cierra." - -# type: =item -#. type: =item -#: dh:61 -msgid "B<--before> I" -msgstr "B<--before> I" - -#. type: textblock -#: dh:63 -#, fuzzy -#| msgid "Run commands in the sequence before I, then stop." -msgid "Run commands in the sequence before I, then stop. (Deprecated)" -msgstr "Ejecuta las órdenes en la secuencia anteriores a I, y cierra." - -# type: =item -#. type: =item -#: dh:66 -msgid "B<--after> I" -msgstr "B<--after> I" - -#. type: textblock -#: dh:68 -#, fuzzy -#| msgid "Run commands in the sequence that come after I." -msgid "Run commands in the sequence that come after I. (Deprecated)" -msgstr "Ejecuta las órdenes en la secuencia posteriores a I." - -# type: =item -#. type: =item -#: dh:71 -msgid "B<--remaining>" -msgstr "B<--remaining>" - -#. type: textblock -#: dh:73 -#, fuzzy -#| msgid "Run all commands in the sequence that have yet to be run." -msgid "Run all commands in the sequence that have yet to be run. (Deprecated)" -msgstr "Ejecuta todas las órdenes en la secuencia que aún no se han ejecutado." - -#. type: textblock -#: dh:78 msgid "" "Prints commands that would run for a given sequence, but does not run them." msgstr "" @@ -1941,38 +1891,29 @@ msgstr "" "ejecuta." #. type: textblock -#: dh:82 +#: dh:62 +#, fuzzy +#| msgid "" +#| "All other options passed to B are passed on to each command it runs. " +#| "This can be used to set an option like B<-v> or B<-X> or B<-N>, as well " +#| "as for more specialised options." msgid "" -"All other options passed to B are passed on to each command it runs. " -"This can be used to set an option like B<-v> or B<-X> or B<-N>, as well as " -"for more specialised options." +"Other options passed to B are passed on to each command it runs. This " +"can be used to set an option like B<-v> or B<-X> or B<-N>, as well as for " +"more specialised options." msgstr "" "Todas las demás opciones introducidas a B se introducen a cada orden que " "ejecuta. Puede usar esto para definir una opción como B<-v>, B<-X> o B<-N>, " "así como opciones más especializadas." -#. type: textblock -#: dh:86 -msgid "" -"In the above options, I can be a full name of a debhelper command, or a " -"substring. It'll first search for a command in the sequence exactly matching " -"the name, to avoid any ambiguity. If there are multiple substring matches, " -"the last one in the sequence will be used." -msgstr "" -"En las opciones anteriores, I puede ser el nombre completo de una " -"orden de debhelper, o una subcadena. Buscará en primer lugar una orden en la " -"secuencia que coincide totalmente con el nombre, para evitar cualquier " -"ambigüedad. Si hay muchas coincidencias con la subcadena se usará la última " -"en la secuencia." - # type: =head1 #. type: =head1 -#: dh:117 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69 +#: dh:66 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69 msgid "EXAMPLES" msgstr "EJEMPLOS" #. type: textblock -#: dh:119 +#: dh:68 msgid "" "To see what commands are included in a sequence, without actually doing " "anything:" @@ -1981,7 +1922,7 @@ msgstr "" "realidad:" #. type: verbatim -#: dh:122 +#: dh:71 #, no-wrap msgid "" "\tdh binary-arch --no-act\n" @@ -1991,7 +1932,7 @@ msgstr "" "\n" #. type: textblock -#: dh:124 +#: dh:73 msgid "" "This is a very simple rules file, for packages where the default sequences " "of commands work with no additional options." @@ -2000,7 +1941,7 @@ msgstr "" "predeterminadas de órdenes funcionan sin opciones adicionales." #. type: verbatim -#: dh:127 dh:134 dh:148 dh:161 +#: dh:76 dh:83 dh:97 dh:110 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2014,7 +1955,7 @@ msgstr "" "\n" #. type: verbatim -#: dh:131 +#: dh:80 #, no-wrap msgid "" "Often you'll want to pass an option to a specific debhelper command. The\n" @@ -2027,7 +1968,7 @@ msgstr "" "\t\n" #. type: verbatim -#: dh:138 +#: dh:87 #, no-wrap msgid "" "\toverride_dh_strip:\n" @@ -2039,7 +1980,7 @@ msgstr "" "\t\t\n" #. type: verbatim -#: dh:141 +#: dh:90 #, no-wrap msgid "" "\toverride_dh_installdocs:\n" @@ -2051,7 +1992,7 @@ msgstr "" "\n" #. type: textblock -#: dh:144 +#: dh:93 msgid "" "Sometimes the automated L and L " "can't guess what to do for a strange package. Here's how to avoid running " @@ -2063,7 +2004,7 @@ msgstr "" "ejecutar sus propias órdenes." #. type: verbatim -#: dh:152 +#: dh:101 #, no-wrap msgid "" "\toverride_dh_auto_configure:\n" @@ -2075,7 +2016,7 @@ msgstr "" "\n" #. type: verbatim -#: dh:155 +#: dh:104 #, no-wrap msgid "" "\toverride_dh_auto_build:\n" @@ -2087,7 +2028,7 @@ msgstr "" "\n" #. type: textblock -#: dh:158 +#: dh:107 msgid "" "Another common case is wanting to do something manually before or after a " "particular debhelper command is run." @@ -2096,7 +2037,7 @@ msgstr "" "se ejecute una orden en particular de debhelper." #. type: verbatim -#: dh:165 +#: dh:114 #, no-wrap msgid "" "\toverride_dh_fixperms:\n" @@ -2110,7 +2051,7 @@ msgstr "" "\n" #. type: textblock -#: dh:169 +#: dh:118 msgid "" "Python tools are not run by dh by default, due to the continual change in " "that area. (Before compatability level v9, dh does run B.) " @@ -2118,7 +2059,7 @@ msgid "" msgstr "" #. type: verbatim -#: dh:173 +#: dh:122 #, fuzzy, no-wrap #| msgid "" #| "\t#!/usr/bin/make -f\n" @@ -2137,7 +2078,7 @@ msgstr "" "\n" #. type: textblock -#: dh:177 +#: dh:126 msgid "" "If your package uses autotools and you want to freshen F and " "F with newer versions from the B package at " @@ -2150,7 +2091,7 @@ msgstr "" "que automatizan esto, como puede ver a continuación." #. type: verbatim -#: dh:182 +#: dh:131 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2164,7 +2105,7 @@ msgstr "" "\n" #. type: textblock -#: dh:186 +#: dh:135 msgid "" "Here is how to force use of Perl's B build system, which can " "be necessary if debhelper wrongly detects that the package uses MakeMaker." @@ -2174,7 +2115,7 @@ msgstr "" "detecta erróneamente que el paquete usa MakeMaker." #. type: verbatim -#: dh:190 +#: dh:139 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2187,34 +2128,8 @@ msgstr "" "\t\tdh $@ --buildsystem=perl_build\n" "\n" -#. type: verbatim -#: dh:194 -#, no-wrap -msgid "" -"To patch your package using quilt, you can tell B to use quilt's B\n" -"sequence addons like this:\n" -"\t\n" -msgstr "" -"Para parchear su paquete mediante quilt, puede indicar a B que\n" -"use las extensiones de secuencia de quilt para B, como puede ver:\n" -"\t\n" - -#. type: verbatim -#: dh:197 -#, no-wrap -msgid "" -"\t#!/usr/bin/make -f\n" -"\t%:\n" -"\t\tdh $@ --with quilt\n" -"\n" -msgstr "" -"\t#!/usr/bin/make -f\n" -"\t%:\n" -"\t\tdh $@ --with quilt\n" -"\n" - #. type: textblock -#: dh:201 +#: dh:143 msgid "" "Here is an example of overriding where the BI<*> commands find the " "package's source, for a package where the source is located in a " @@ -2225,7 +2140,7 @@ msgstr "" "en el que las fuentes se ubican en un subdirectorio." #. type: verbatim -#: dh:205 +#: dh:147 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2239,7 +2154,7 @@ msgstr "" "\n" #. type: textblock -#: dh:209 +#: dh:151 msgid "" "And here is an example of how to tell the BI<*> commands to build " "in a subdirectory, which will be removed on B." @@ -2249,7 +2164,7 @@ msgstr "" "B." #. type: verbatim -#: dh:212 +#: dh:154 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2263,7 +2178,7 @@ msgstr "" "\n" #. type: textblock -#: dh:216 +#: dh:158 msgid "" "If your package can be built in parallel, you can support parallel building " "as follows. Then B will work." @@ -2273,7 +2188,7 @@ msgstr "" "j> funcionará." #. type: verbatim -#: dh:219 +#: dh:161 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2287,7 +2202,7 @@ msgstr "" "\n" #. type: textblock -#: dh:223 +#: dh:165 msgid "" "Here is a way to prevent B from running several commands that you don't " "want it to run, by defining empty override targets for each command." @@ -2297,7 +2212,7 @@ msgstr "" "cada orden." #. type: verbatim -#: dh:226 dh:237 dh:254 +#: dh:168 dh:179 dh:196 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2311,7 +2226,7 @@ msgstr "" "\t\n" #. type: verbatim -#: dh:230 +#: dh:172 #, no-wrap msgid "" "\t# Commands not to run:\n" @@ -2323,7 +2238,7 @@ msgstr "" "\n" #. type: textblock -#: dh:233 +#: dh:175 msgid "" "Sometimes, you may need to make an override target only run commands when a " "particular package is being built. This can be accomplished using " @@ -2335,7 +2250,7 @@ msgstr "" "ejemplo:" #. type: verbatim -#: dh:241 +#: dh:183 #, fuzzy, no-wrap #| msgid "" #| "\toverride_dh_fixperms:\n" @@ -2360,7 +2275,7 @@ msgstr "" "\n" #. type: textblock -#: dh:247 +#: dh:189 #, fuzzy #| msgid "" #| "Finally, remember that you are not limited to using override targets in " @@ -2387,7 +2302,7 @@ msgstr "" "demonios de construcción generen la documentación de forma innecesaria." #. type: verbatim -#: dh:258 +#: dh:200 #, fuzzy, no-wrap #| msgid "" #| "\tbuild: build-arch build-indep ;\n" @@ -2411,7 +2326,7 @@ msgstr "" "\n" #. type: textblock -#: dh:263 +#: dh:205 msgid "" "Note that in the example above, dh will arrange for \"debian/rules build\" " "to call your build-indep and build-arch targets. You do not need to " @@ -2421,12 +2336,12 @@ msgid "" msgstr "" #. type: =head1 -#: dh:269 +#: dh:211 msgid "INTERNALS" msgstr "FUNCIONAMIENTO INTERNO" #. type: textblock -#: dh:271 +#: dh:213 msgid "" "If you're curious about B's internals, here's how it works under the " "hood." @@ -2435,7 +2350,7 @@ msgstr "" "puede ver como funciona por dentro." #. type: textblock -#: dh:273 +#: dh:215 msgid "" "Each debhelper command will record when it's successfully run in F. (Which B deletes.) So B can tell which " @@ -2448,7 +2363,7 @@ msgstr "" "esas órdenes otra vez." #. type: textblock -#: dh:278 +#: dh:220 msgid "" "Each time B is run, it examines the log, and finds the last logged " "command that is in the specified sequence. It then continues with the next " @@ -2461,14 +2376,14 @@ msgstr "" "before>, B<--after> y B<--remaining> pueden anular este comportamiento." #. type: textblock -#: dh:283 +#: dh:225 msgid "" "A sequence can also run dependent targets in debian/rules. For example, the " "\"binary\" sequence runs the \"install\" target." msgstr "" #. type: textblock -#: dh:286 +#: dh:228 msgid "" "B uses the B environment variable to pass " "information through to debhelper commands that are run inside override " @@ -2480,16 +2395,95 @@ msgstr "" "«override». El contenido (e incluso, la existencia) de esta variable de " "entorno, como el nombre sugiere, está sujeto a cambios en cualquier momento." +#. type: =head1 +#: dh:233 +msgid "DEPRECATED OPTIONS" +msgstr "" + +#. type: textblock +#: dh:235 +msgid "" +"The following options are deprecated. It's much better to use override " +"targets instead." +msgstr "" + +# type: =item +#. type: =item +#: dh:240 +msgid "B<--until> I" +msgstr "B<--until> I" + +#. type: textblock +#: dh:242 +#, fuzzy +#| msgid "Run commands in the sequence until and including I, then stop." +msgid "Run commands in the sequence until and including I, then stop." +msgstr "" +"Ejecuta las órdenes en la secuencia hasta la I, inclusive, y cierra." + +# type: =item +#. type: =item +#: dh:244 +msgid "B<--before> I" +msgstr "B<--before> I" + +#. type: textblock +#: dh:246 +#, fuzzy +#| msgid "Run commands in the sequence before I, then stop." +msgid "Run commands in the sequence before I, then stop." +msgstr "Ejecuta las órdenes en la secuencia anteriores a I, y cierra." + +# type: =item +#. type: =item +#: dh:248 +msgid "B<--after> I" +msgstr "B<--after> I" + +#. type: textblock +#: dh:250 +#, fuzzy +#| msgid "Run commands in the sequence that come after I." +msgid "Run commands in the sequence that come after I." +msgstr "Ejecuta las órdenes en la secuencia posteriores a I." + +# type: =item +#. type: =item +#: dh:252 +msgid "B<--remaining>" +msgstr "B<--remaining>" + +#. type: textblock +#: dh:254 +#, fuzzy +#| msgid "Run all commands in the sequence that have yet to be run." +msgid "Run all commands in the sequence that have yet to be run." +msgstr "Ejecuta todas las órdenes en la secuencia que aún no se han ejecutado." + +#. type: textblock +#: dh:258 +msgid "" +"In the above options, I can be a full name of a debhelper command, or a " +"substring. It'll first search for a command in the sequence exactly matching " +"the name, to avoid any ambiguity. If there are multiple substring matches, " +"the last one in the sequence will be used." +msgstr "" +"En las opciones anteriores, I puede ser el nombre completo de una " +"orden de debhelper, o una subcadena. Buscará en primer lugar una orden en la " +"secuencia que coincide totalmente con el nombre, para evitar cualquier " +"ambigüedad. Si hay muchas coincidencias con la subcadena se usará la última " +"en la secuencia." + # type: textblock #. type: textblock -#: dh:868 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 -#: dh_auto_install:87 dh_auto_test:60 dh_builddeb:125 dh_clean:144 +#: dh:860 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 +#: dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144 #: dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 #: dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 #: dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 #: dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 #: dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 -#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:260 +#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:261 #: dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 #: dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 #: dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 @@ -2501,14 +2495,14 @@ msgstr "L" # type: textblock #. type: textblock -#: dh:870 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 -#: dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:127 +#: dh:862 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 +#: dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124 #: dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103 #: dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 #: dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 #: dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 #: dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 -#: dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201 +#: dh_installlogrotate:54 dh_installman:263 dh_installmanpages:201 #: dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 #: dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 #: dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 @@ -2563,7 +2557,7 @@ msgstr "" #. type: textblock #: dh_auto_build:30 dh_auto_clean:32 dh_auto_configure:33 dh_auto_install:45 -#: dh_auto_test:32 +#: dh_auto_test:33 msgid "" "See L> for a list of common build " "system selection and control options." @@ -2574,7 +2568,7 @@ msgstr "" # type: =item #. type: =item #: dh_auto_build:35 dh_auto_clean:37 dh_auto_configure:38 dh_auto_install:56 -#: dh_auto_test:37 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69 +#: dh_auto_test:38 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69 #: dh_installinit:99 dh_makeshlibs:91 dh_shlibdeps:37 msgid "B<--> I" msgstr "B<--> I" @@ -2821,7 +2815,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh_auto_test:14 +#: dh_auto_test:15 msgid "" "B [S>] [S>] " "[S I>]" @@ -2830,7 +2824,7 @@ msgstr "" "debhelper>>] [S I>]" #. type: textblock -#: dh_auto_test:18 +#: dh_auto_test:19 msgid "" "B is a debhelper program that tries to automatically run a " "package's test suite. It does so by running the appropriate command for the " @@ -2850,7 +2844,7 @@ msgstr "" "cero sin hacer nada." #. type: textblock -#: dh_auto_test:26 +#: dh_auto_test:27 msgid "" "This is intended to work for about 90% of packages with a test suite. If it " "doesn't work, you're encouraged to skip using B at all, and " @@ -2861,7 +2855,7 @@ msgstr "" "simplemente ejecute el conjunto de pruebas manualmente." #. type: textblock -#: dh_auto_test:39 +#: dh_auto_test:40 msgid "" "Pass I to the program that is run. These can be used to supplement " "or override the any standard parameters that B passes." @@ -2871,7 +2865,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh_auto_test:46 +#: dh_auto_test:47 msgid "" "If the B environment variable contains B, no " "tests will be performed." @@ -4333,7 +4327,7 @@ msgstr "" # type: =item #. type: =item #: dh_installcron:44 dh_installifupdown:43 dh_installinit:104 -#: dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52 +#: dh_installlogcheck:44 dh_installlogrotate:26 dh_installmodules:52 #: dh_installpam:35 dh_installppp:39 dh_installudev:39 msgid "B<--name=>I" msgstr "B<--name=>I" @@ -5636,7 +5630,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh_installlogcheck:48 +#: dh_installlogcheck:46 #, fuzzy #| msgid "" #| "Look for files named F and install them as " @@ -8310,6 +8304,26 @@ msgstr "Normas de Debian, versión 2.2" msgid "Andrew Stribblehill " msgstr "Andrew Stribblehill " +#~ msgid "" +#~ "To patch your package using quilt, you can tell B to use quilt's B\n" +#~ "sequence addons like this:\n" +#~ "\t\n" +#~ msgstr "" +#~ "Para parchear su paquete mediante quilt, puede indicar a B que\n" +#~ "use las extensiones de secuencia de quilt para B, como puede ver:\n" +#~ "\t\n" + +#~ msgid "" +#~ "\t#!/usr/bin/make -f\n" +#~ "\t%:\n" +#~ "\t\tdh $@ --with quilt\n" +#~ "\n" +#~ msgstr "" +#~ "\t#!/usr/bin/make -f\n" +#~ "\t%:\n" +#~ "\t\tdh $@ --with quilt\n" +#~ "\n" + # type: =head2 #~ msgid "Debhelper compatibility levels" #~ msgstr "Niveles de compatibilidad de debhelper" diff --git a/man/po4a/po/fr.po b/man/po4a/po/fr.po index 7073bf95..6281854a 100644 --- a/man/po4a/po/fr.po +++ b/man/po4a/po/fr.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: debhelper manpages\n" -"POT-Creation-Date: 2011-08-23 15:26-0400\n" +"POT-Creation-Date: 2011-09-10 18:35-0400\n" "PO-Revision-Date: 2011-04-03 17:37+0200\n" "Last-Translator: Valery Perrin \n" "Language-Team: Français \n" @@ -42,7 +42,7 @@ msgstr "debhelper - ensemble d'outils regroupés sous le nom de debhelper" # type: =head1 #. type: =head1 #: debhelper.pod:5 dh:12 dh_auto_build:12 dh_auto_clean:13 -#: dh_auto_configure:12 dh_auto_install:15 dh_auto_test:12 dh_bugfiles:12 +#: dh_auto_configure:12 dh_auto_install:15 dh_auto_test:13 dh_bugfiles:12 #: dh_builddeb:12 dh_clean:12 dh_compress:13 dh_desktop:12 dh_fixperms:12 #: dh_gconf:12 dh_gencontrol:12 dh_icons:13 dh_install:13 #: dh_installcatalogs:14 dh_installchangelogs:12 dh_installcron:12 @@ -72,7 +72,7 @@ msgstr "" # type: =head1 #. type: =head1 #: debhelper.pod:9 dh:16 dh_auto_build:16 dh_auto_clean:17 -#: dh_auto_configure:16 dh_auto_install:19 dh_auto_test:16 dh_bugfiles:16 +#: dh_auto_configure:16 dh_auto_install:19 dh_auto_test:17 dh_bugfiles:16 #: dh_builddeb:16 dh_clean:16 dh_compress:17 dh_desktop:16 dh_fixperms:16 #: dh_gconf:16 dh_gencontrol:16 dh_icons:17 dh_install:17 #: dh_installcatalogs:18 dh_installchangelogs:16 dh_installcron:16 @@ -334,7 +334,7 @@ msgstr "" # type: =item #. type: =item -#: debhelper.pod:101 dh:76 +#: debhelper.pod:101 dh:56 msgid "B<--no-act>" msgstr "B<--no-act>" @@ -895,7 +895,7 @@ msgstr "Ce mode fonctionne comme v2 mais avec les ajouts suivants :" #: debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:407 #: debhelper.pod:414 debhelper.pod:418 debhelper.pod:422 debhelper.pod:437 #: debhelper.pod:441 debhelper.pod:449 debhelper.pod:454 debhelper.pod:468 -#: debhelper.pod:473 debhelper.pod:479 debhelper.pod:484 debhelper.pod:488 +#: debhelper.pod:473 debhelper.pod:480 debhelper.pod:485 debhelper.pod:489 msgid "-" msgstr "-" @@ -1222,25 +1222,26 @@ msgstr "" #. type: textblock #: debhelper.pod:475 msgid "" -"dh allows defining custom build, build-arch, and build-indep targets in " -"debian/rules, without needing to manually define the other targets that " -"depend on them." +"dh is aware of the usual dependencies between targets in debian/rules. So, " +"\"dh binary\" will run any build, build-arch, build-indep, install, etc " +"targets that exist in the rules file. There's no need to define an explicit " +"binary target with explicit dependencies on the other targets." msgstr "" #. type: textblock -#: debhelper.pod:481 +#: debhelper.pod:482 msgid "" "B does not include the source package name in --" "libexecdir when using autoconf." msgstr "" #. type: textblock -#: debhelper.pod:486 +#: debhelper.pod:487 msgid "B does not default to enabling --with=python-support" msgstr "" #. type: textblock -#: debhelper.pod:490 +#: debhelper.pod:491 msgid "" "All of the BI<*> debhelper programs and B set environment " "variables listed by B, unless they are already set. They " @@ -1249,7 +1250,7 @@ msgstr "" # type: =head1 #. type: =head1 -#: debhelper.pod:498 dh_auto_test:44 dh_installcatalogs:59 dh_installdocs:116 +#: debhelper.pod:499 dh_auto_test:45 dh_installcatalogs:59 dh_installdocs:116 #: dh_installemacsen:67 dh_installexamples:53 dh_installinit:133 #: dh_installman:81 dh_installmime:51 dh_installmodules:60 dh_installudev:55 #: dh_installwm:54 dh_installxfonts:37 dh_movefiles:64 dh_strip:68 @@ -1259,13 +1260,13 @@ msgstr "REMARQUES" # type: =head2 #. type: =head2 -#: debhelper.pod:500 +#: debhelper.pod:501 msgid "Multiple binary package support" msgstr "Prise en charge de plusieurs paquets binaires" # type: textblock #. type: textblock -#: debhelper.pod:502 +#: debhelper.pod:503 msgid "" "If your source package generates more than one binary package, debhelper " "programs will default to acting on all binary packages when run. If your " @@ -1285,7 +1286,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:510 +#: debhelper.pod:511 msgid "" "To facilitate this, as well as give you more control over which packages are " "acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-" @@ -1301,13 +1302,13 @@ msgstr "" # type: =head2 #. type: =head2 -#: debhelper.pod:516 +#: debhelper.pod:517 msgid "Automatic generation of Debian install scripts" msgstr "Génération automatique des scripts Debian de maintenance du paquet" # type: textblock #. type: textblock -#: debhelper.pod:518 +#: debhelper.pod:519 msgid "" "Some debhelper commands will automatically generate parts of Debian " "maintainer scripts. If you want these automatically generated things " @@ -1325,7 +1326,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:525 +#: debhelper.pod:526 msgid "" "If a script does not exist at all and debhelper needs to add something to " "it, then debhelper will create the complete script." @@ -1335,7 +1336,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:528 +#: debhelper.pod:529 msgid "" "All debhelper commands that automatically generate code in this way let it " "be disabled by the -n parameter (see above)." @@ -1346,7 +1347,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:531 +#: debhelper.pod:532 msgid "" "Note that the inserted code will be shell code, so you cannot directly use " "it in a Perl script. If you would like to embed it into a Perl script, here " @@ -1361,7 +1362,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: debhelper.pod:536 +#: debhelper.pod:537 #, no-wrap msgid "" " my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n" @@ -1380,13 +1381,13 @@ msgstr "" # type: =head2 #. type: =head2 -#: debhelper.pod:542 +#: debhelper.pod:543 msgid "Automatic generation of miscellaneous dependencies." msgstr "Génération automatique des diverses dépendances." # type: textblock #. type: textblock -#: debhelper.pod:544 +#: debhelper.pod:545 #, fuzzy #| msgid "" #| "Some debhelper commands may make the generated package need to depend on " @@ -1415,7 +1416,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:552 +#: debhelper.pod:553 msgid "" "All commands of this type, besides documenting what dependencies may be " "needed on their man pages, will automatically generate a substvar called B<" @@ -1430,7 +1431,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:557 +#: debhelper.pod:558 msgid "" "This is entirely independent of the standard B<${shlibs:Depends}> generated " "by L, and the B<${perl:Depends}> generated by L." @@ -1461,7 +1462,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:567 +#: debhelper.pod:568 msgid "" "Sometimes, you might want to use some other temporary directory. This is " "supported by the B<-P> flag. For example, \"B" @@ -1481,13 +1482,13 @@ msgstr "" # type: =head2 #. type: =head2 -#: debhelper.pod:575 +#: debhelper.pod:576 msgid "udebs" msgstr "udebs" # type: textblock #. type: textblock -#: debhelper.pod:577 +#: debhelper.pod:578 msgid "" "Debhelper includes support for udebs. To create a udeb with debhelper, add " "\"B\" to the package's stanza in F, and " @@ -1506,13 +1507,13 @@ msgstr "" "F, etc." #. type: =head2 -#: debhelper.pod:584 +#: debhelper.pod:585 msgid "Build depends" msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:586 +#: debhelper.pod:587 msgid "" "Once your package uses debhelper to build, be sure to add debhelper to your " "Build-Depends line in F. You should build-depend on a " @@ -1528,7 +1529,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: debhelper.pod:592 +#: debhelper.pod:593 #, no-wrap msgid "" " Build-Depends: debhelper (>= 7)\n" @@ -1539,19 +1540,19 @@ msgstr "" # type: =head1 #. type: =head1 -#: debhelper.pod:594 +#: debhelper.pod:595 msgid "ENVIRONMENT" msgstr "VARIABLES D'ENVIRONNEMENT" # type: =item #. type: =item -#: debhelper.pod:598 +#: debhelper.pod:599 msgid "B" msgstr "B" # type: textblock #. type: textblock -#: debhelper.pod:600 +#: debhelper.pod:601 msgid "" "Set to B<1> to enable verbose mode. Debhelper will output every command it " "runs that modifies files on the build system." @@ -1561,13 +1562,13 @@ msgstr "" # type: =item #. type: =item -#: debhelper.pod:603 +#: debhelper.pod:604 msgid "B" msgstr "B" # type: textblock #. type: textblock -#: debhelper.pod:605 +#: debhelper.pod:606 msgid "" "Temporarily specifies what compatibility level debhelper should run at, " "overriding any value in F." @@ -1577,25 +1578,25 @@ msgstr "" # type: =item #. type: =item -#: debhelper.pod:608 +#: debhelper.pod:609 msgid "B" msgstr "B" # type: textblock #. type: textblock -#: debhelper.pod:610 +#: debhelper.pod:611 msgid "Set to B<1> to enable no-act mode." msgstr "Mettre cette variable à B<1> pour activer le mode simulation (no-act)." # type: =item #. type: =item -#: debhelper.pod:612 +#: debhelper.pod:613 msgid "B" msgstr "B" # type: textblock #. type: textblock -#: debhelper.pod:614 +#: debhelper.pod:615 msgid "" "Anything in this variable will be prepended to the command line arguments of " "all debhelper commands. Command-specific options will be ignored by commands " @@ -1607,7 +1608,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:618 +#: debhelper.pod:619 msgid "" "This is useful in some situations, for example, if you need to pass B<-p> to " "all debhelper commands that will be run. One good way to set B " @@ -1622,13 +1623,13 @@ msgstr "" # type: =item #. type: =item -#: debhelper.pod:623 +#: debhelper.pod:624 msgid "B" msgstr "B" # type: textblock #. type: textblock -#: debhelper.pod:625 +#: debhelper.pod:626 msgid "" "If set, this adds the value the variable is set to to the B<-X> options of " "all commands that support the B<-X> option. Moreover, B will " @@ -1641,7 +1642,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:629 +#: debhelper.pod:630 msgid "" "This can be useful if you are doing a build from a CVS source tree, in which " "case setting B will prevent any CVS directories from " @@ -1660,7 +1661,7 @@ msgstr "" # type: textblock #. type: textblock -#: debhelper.pod:636 +#: debhelper.pod:637 msgid "" "Multiple things to exclude can be separated with colons, as in " "B" @@ -1670,15 +1671,15 @@ msgstr "" # type: =head1 #. type: =head1 -#: debhelper.pod:641 dh:866 dh_auto_build:47 dh_auto_clean:50 -#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:58 dh_bugfiles:122 -#: dh_builddeb:123 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 +#: debhelper.pod:642 dh:858 dh_auto_build:47 dh_auto_clean:50 +#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122 +#: dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 #: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 #: dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 #: dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 #: dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 #: dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 -#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:258 +#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:259 #: dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 #: dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 #: dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 @@ -1691,40 +1692,40 @@ msgstr "VOIR AUSSI" # type: =item #. type: =item -#: debhelper.pod:645 +#: debhelper.pod:646 msgid "F" msgstr "F" # type: textblock #. type: textblock -#: debhelper.pod:647 +#: debhelper.pod:648 msgid "A set of example F files that use debhelper." msgstr "" "Un ensemble d'exemples de fichiers F qui utilisent debhelper." # type: =item #. type: =item -#: debhelper.pod:649 +#: debhelper.pod:650 msgid "L" msgstr "L" # type: textblock #. type: textblock -#: debhelper.pod:651 +#: debhelper.pod:652 msgid "Debhelper web site." msgstr "Le site internet de debhelper." # type: =head1 #. type: =head1 -#: debhelper.pod:655 dh:872 dh_auto_build:53 dh_auto_clean:56 -#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:64 dh_bugfiles:130 -#: dh_builddeb:129 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 +#: debhelper.pod:656 dh:864 dh_auto_build:53 dh_auto_clean:56 +#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130 +#: dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 #: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 #: dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 #: dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 #: dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 #: dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82 -#: dh_installlogrotate:56 dh_installman:264 dh_installmanpages:203 +#: dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203 #: dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 #: dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 #: dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 @@ -1736,14 +1737,14 @@ msgstr "AUTEUR" # type: textblock #. type: textblock -#: debhelper.pod:657 dh:874 dh_auto_build:55 dh_auto_clean:58 -#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:66 dh_builddeb:131 +#: debhelper.pod:658 dh:866 dh_auto_build:55 dh_auto_clean:58 +#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128 #: dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90 #: dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 #: dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 #: dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 #: dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 -#: dh_installman:266 dh_installmanpages:205 dh_installmenu:97 +#: dh_installman:267 dh_installmanpages:205 dh_installmenu:97 #: dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 #: dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 #: dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 @@ -1761,9 +1762,13 @@ msgstr "dh - automate de commandes debhelper" # type: textblock #. type: textblock #: dh:14 +#, fuzzy +#| msgid "" +#| "B I [B<--with> I[B<,>I ...]] [B<--list>] [B<--" +#| "until> I] [B<--before> I] [B<--after> I] [B<--remaining>] " +#| "[S>]" msgid "" -"B I [B<--with> I[B<,>I ...]] [B<--list>] [B<--" -"until> I] [B<--before> I] [B<--after> I] [B<--remaining>] " +"B I [B<--with> I[B<,>I ...]] [B<--list>] " "[S>]" msgstr "" "B I [B<--with> I[B<,>I ...]] [B<--list>] [B<--" @@ -1822,12 +1827,12 @@ msgstr "" # type: =head1 #. type: =head1 #: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31 -#: dh_auto_install:43 dh_auto_test:30 dh_bugfiles:50 dh_builddeb:21 +#: dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21 #: dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26 #: dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56 #: dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66 #: dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39 -#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42 +#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:40 #: dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40 #: dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31 #: dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51 @@ -1879,73 +1884,8 @@ msgstr "" msgid "List all available addons." msgstr "Liste tous les rajouts disponibles." -# type: =item -#. type: =item -#: dh:56 -msgid "B<--until> I" -msgstr "B<--until> I" - -# type: textblock #. type: textblock #: dh:58 -#, fuzzy -#| msgid "Run commands in the sequence until and including I, then stop." -msgid "" -"Run commands in the sequence until and including I, then stop. " -"(Deprecated)" -msgstr "" -"Exécute les commandes de la séquence jusqu'à la I spécifiée, " -"l'exécute puis s'arrête." - -# type: =item -#. type: =item -#: dh:61 -msgid "B<--before> I" -msgstr "B<--before> I" - -# type: textblock -#. type: textblock -#: dh:63 -#, fuzzy -#| msgid "Run commands in the sequence before I, then stop." -msgid "Run commands in the sequence before I, then stop. (Deprecated)" -msgstr "" -"Exécute les commandes de la séquence situées avant la I spécifiée " -"puis s'arrête." - -# type: =item -#. type: =item -#: dh:66 -msgid "B<--after> I" -msgstr "B<--after> I" - -# type: textblock -#. type: textblock -#: dh:68 -#, fuzzy -#| msgid "Run commands in the sequence that come after I." -msgid "Run commands in the sequence that come after I. (Deprecated)" -msgstr "" -"Exécute les commandes de la séquence situées après la I spécifiée." - -# type: =item -#. type: =item -#: dh:71 -msgid "B<--remaining>" -msgstr "B<--remaining>" - -# type: textblock -#. type: textblock -#: dh:73 -#, fuzzy -#| msgid "Run all commands in the sequence that have yet to be run." -msgid "Run all commands in the sequence that have yet to be run. (Deprecated)" -msgstr "" -"Exécute toutes les commandes de la séquence qui n'ont pas encore été " -"exécutées." - -#. type: textblock -#: dh:78 msgid "" "Prints commands that would run for a given sequence, but does not run them." msgstr "" @@ -1954,40 +1894,30 @@ msgstr "" # type: textblock #. type: textblock -#: dh:82 +#: dh:62 +#, fuzzy +#| msgid "" +#| "All other options passed to B are passed on to each command it runs. " +#| "This can be used to set an option like B<-v> or B<-X> or B<-N>, as well " +#| "as for more specialised options." msgid "" -"All other options passed to B are passed on to each command it runs. " -"This can be used to set an option like B<-v> or B<-X> or B<-N>, as well as " -"for more specialised options." +"Other options passed to B are passed on to each command it runs. This " +"can be used to set an option like B<-v> or B<-X> or B<-N>, as well as for " +"more specialised options." msgstr "" "Toute autre option fournie à B est passée en paramètre à chaque commande " "exécutée. Cela est utile tant pour les options comme B<-v>, B<-X> ou B<-N> " "que pour des options plus spécialisées. " -# type: textblock -#. type: textblock -#: dh:86 -msgid "" -"In the above options, I can be a full name of a debhelper command, or a " -"substring. It'll first search for a command in the sequence exactly matching " -"the name, to avoid any ambiguity. If there are multiple substring matches, " -"the last one in the sequence will be used." -msgstr "" -"Dans les options ci-dessus, I peut être soit le nom complet de la " -"commande debhelper, soit une sous-chaîne de ce nom. dh cherchera d'abord, " -"dans la séquence, une commande portant le nom exact pour éviter toute " -"ambiguïté. Si plusieurs commandes correspondent à la sous-chaîne la dernière " -"de la séquence sera prise en compte." - # type: =head1 #. type: =head1 -#: dh:117 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69 +#: dh:66 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69 msgid "EXAMPLES" msgstr "EXEMPLES" # type: textblock #. type: textblock -#: dh:119 +#: dh:68 msgid "" "To see what commands are included in a sequence, without actually doing " "anything:" @@ -1997,7 +1927,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:122 +#: dh:71 #, no-wrap msgid "" "\tdh binary-arch --no-act\n" @@ -2008,7 +1938,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh:124 +#: dh:73 msgid "" "This is a very simple rules file, for packages where the default sequences " "of commands work with no additional options." @@ -2018,7 +1948,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:127 dh:134 dh:148 dh:161 +#: dh:76 dh:83 dh:97 dh:110 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2033,7 +1963,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:131 +#: dh:80 #, no-wrap msgid "" "Often you'll want to pass an option to a specific debhelper command. The\n" @@ -2046,7 +1976,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:138 +#: dh:87 #, no-wrap msgid "" "\toverride_dh_strip:\n" @@ -2059,7 +1989,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:141 +#: dh:90 #, no-wrap msgid "" "\toverride_dh_installdocs:\n" @@ -2072,7 +2002,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh:144 +#: dh:93 msgid "" "Sometimes the automated L and L " "can't guess what to do for a strange package. Here's how to avoid running " @@ -2085,7 +2015,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:152 +#: dh:101 #, no-wrap msgid "" "\toverride_dh_auto_configure:\n" @@ -2098,7 +2028,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:155 +#: dh:104 #, no-wrap msgid "" "\toverride_dh_auto_build:\n" @@ -2111,7 +2041,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh:158 +#: dh:107 msgid "" "Another common case is wanting to do something manually before or after a " "particular debhelper command is run." @@ -2121,7 +2051,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:165 +#: dh:114 #, no-wrap msgid "" "\toverride_dh_fixperms:\n" @@ -2135,7 +2065,7 @@ msgstr "" "\n" #. type: textblock -#: dh:169 +#: dh:118 msgid "" "Python tools are not run by dh by default, due to the continual change in " "that area. (Before compatability level v9, dh does run B.) " @@ -2144,7 +2074,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:173 +#: dh:122 #, fuzzy, no-wrap #| msgid "" #| "\t#!/usr/bin/make -f\n" @@ -2163,7 +2093,7 @@ msgstr "" "\n" #. type: textblock -#: dh:177 +#: dh:126 msgid "" "If your package uses autotools and you want to freshen F and " "F with newer versions from the B package at " @@ -2178,7 +2108,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:182 +#: dh:131 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2193,7 +2123,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh:186 +#: dh:135 msgid "" "Here is how to force use of Perl's B build system, which can " "be necessary if debhelper wrongly detects that the package uses MakeMaker." @@ -2204,7 +2134,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:190 +#: dh:139 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2217,37 +2147,9 @@ msgstr "" "\t\tdh --buildsystem=perl_build $@\n" "\n" -# type: verbatim -#. type: verbatim -#: dh:194 -#, no-wrap -msgid "" -"To patch your package using quilt, you can tell B to use quilt's B\n" -"sequence addons like this:\n" -"\t\n" -msgstr "" -"Pour patcher un paquet en utilisant « quilt », il faut demander à B\n" -"d'utiliser la séquence B propre à « quilt ». Voici comment faire :\n" -"\t\n" - -# type: verbatim -#. type: verbatim -#: dh:197 -#, no-wrap -msgid "" -"\t#!/usr/bin/make -f\n" -"\t%:\n" -"\t\tdh $@ --with quilt\n" -"\n" -msgstr "" -"\t#!/usr/bin/make -f\n" -"\t%:\n" -"\t\tdh $@ --with quilt\n" -"\n" - # type: textblock #. type: textblock -#: dh:201 +#: dh:143 msgid "" "Here is an example of overriding where the BI<*> commands find the " "package's source, for a package where the source is located in a " @@ -2258,7 +2160,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:205 +#: dh:147 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2272,7 +2174,7 @@ msgstr "" "\n" #. type: textblock -#: dh:209 +#: dh:151 msgid "" "And here is an example of how to tell the BI<*> commands to build " "in a subdirectory, which will be removed on B." @@ -2283,7 +2185,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:212 +#: dh:154 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2297,7 +2199,7 @@ msgstr "" "\n" #. type: textblock -#: dh:216 +#: dh:158 msgid "" "If your package can be built in parallel, you can support parallel building " "as follows. Then B will work." @@ -2307,7 +2209,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:219 +#: dh:161 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2321,7 +2223,7 @@ msgstr "" "\n" #. type: textblock -#: dh:223 +#: dh:165 msgid "" "Here is a way to prevent B from running several commands that you don't " "want it to run, by defining empty override targets for each command." @@ -2332,7 +2234,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:226 dh:237 dh:254 +#: dh:168 dh:179 dh:196 #, no-wrap msgid "" "\t#!/usr/bin/make -f\n" @@ -2346,7 +2248,7 @@ msgstr "" "\t\n" #. type: verbatim -#: dh:230 +#: dh:172 #, no-wrap msgid "" "\t# Commands not to run:\n" @@ -2358,7 +2260,7 @@ msgstr "" "\n" #. type: textblock -#: dh:233 +#: dh:175 msgid "" "Sometimes, you may need to make an override target only run commands when a " "particular package is being built. This can be accomplished using " @@ -2371,7 +2273,7 @@ msgstr "" # type: verbatim #. type: verbatim -#: dh:241 +#: dh:183 #, no-wrap msgid "" "\toverride_dh_fixperms:\n" @@ -2389,7 +2291,7 @@ msgstr "" "\n" #. type: textblock -#: dh:247 +#: dh:189 #, fuzzy #| msgid "" #| "Finally, remember that you are not limited to using override targets in " @@ -2417,7 +2319,7 @@ msgstr "" "cette génération soit refaite pour chacune des architectures." #. type: verbatim -#: dh:258 +#: dh:200 #, fuzzy, no-wrap #| msgid "" #| "\tbuild: build-arch build-indep ;\n" @@ -2441,7 +2343,7 @@ msgstr "" "\n" #. type: textblock -#: dh:263 +#: dh:205 msgid "" "Note that in the example above, dh will arrange for \"debian/rules build\" " "to call your build-indep and build-arch targets. You do not need to " @@ -2451,12 +2353,12 @@ msgid "" msgstr "" #. type: =head1 -#: dh:269 +#: dh:211 msgid "INTERNALS" msgstr "FONCTIONNEMENT INTERNE" #. type: textblock -#: dh:271 +#: dh:213 msgid "" "If you're curious about B's internals, here's how it works under the " "hood." @@ -2466,7 +2368,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh:273 +#: dh:215 msgid "" "Each debhelper command will record when it's successfully run in F. (Which B deletes.) So B can tell which " @@ -2481,7 +2383,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh:278 +#: dh:220 msgid "" "Each time B is run, it examines the log, and finds the last logged " "command that is in the specified sequence. It then continues with the next " @@ -2494,14 +2396,14 @@ msgstr "" "B<--after> et B<--remaining> permettent de modifier ce comportement." #. type: textblock -#: dh:283 +#: dh:225 msgid "" "A sequence can also run dependent targets in debian/rules. For example, the " "\"binary\" sequence runs the \"install\" target." msgstr "" #. type: textblock -#: dh:286 +#: dh:228 msgid "" "B uses the B environment variable to pass " "information through to debhelper commands that are run inside override " @@ -2514,16 +2416,106 @@ msgstr "" "d'environnement, comme son nom l'indique, est sujet à des modifications " "permanentes." +#. type: =head1 +#: dh:233 +msgid "DEPRECATED OPTIONS" +msgstr "" + +#. type: textblock +#: dh:235 +msgid "" +"The following options are deprecated. It's much better to use override " +"targets instead." +msgstr "" + +# type: =item +#. type: =item +#: dh:240 +msgid "B<--until> I" +msgstr "B<--until> I" + +# type: textblock +#. type: textblock +#: dh:242 +#, fuzzy +#| msgid "Run commands in the sequence until and including I, then stop." +msgid "Run commands in the sequence until and including I, then stop." +msgstr "" +"Exécute les commandes de la séquence jusqu'à la I spécifiée, " +"l'exécute puis s'arrête." + +# type: =item +#. type: =item +#: dh:244 +msgid "B<--before> I" +msgstr "B<--before> I" + # type: textblock #. type: textblock -#: dh:868 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 -#: dh_auto_install:87 dh_auto_test:60 dh_builddeb:125 dh_clean:144 +#: dh:246 +#, fuzzy +#| msgid "Run commands in the sequence before I, then stop." +msgid "Run commands in the sequence before I, then stop." +msgstr "" +"Exécute les commandes de la séquence situées avant la I spécifiée " +"puis s'arrête." + +# type: =item +#. type: =item +#: dh:248 +msgid "B<--after> I" +msgstr "B<--after> I" + +# type: textblock +#. type: textblock +#: dh:250 +#, fuzzy +#| msgid "Run commands in the sequence that come after I." +msgid "Run commands in the sequence that come after I." +msgstr "" +"Exécute les commandes de la séquence situées après la I spécifiée." + +# type: =item +#. type: =item +#: dh:252 +msgid "B<--remaining>" +msgstr "B<--remaining>" + +# type: textblock +#. type: textblock +#: dh:254 +#, fuzzy +#| msgid "Run all commands in the sequence that have yet to be run." +msgid "Run all commands in the sequence that have yet to be run." +msgstr "" +"Exécute toutes les commandes de la séquence qui n'ont pas encore été " +"exécutées." + +# type: textblock +#. type: textblock +#: dh:258 +msgid "" +"In the above options, I can be a full name of a debhelper command, or a " +"substring. It'll first search for a command in the sequence exactly matching " +"the name, to avoid any ambiguity. If there are multiple substring matches, " +"the last one in the sequence will be used." +msgstr "" +"Dans les options ci-dessus, I peut être soit le nom complet de la " +"commande debhelper, soit une sous-chaîne de ce nom. dh cherchera d'abord, " +"dans la séquence, une commande portant le nom exact pour éviter toute " +"ambiguïté. Si plusieurs commandes correspondent à la sous-chaîne la dernière " +"de la séquence sera prise en compte." + +# type: textblock +#. type: textblock +#: dh:860 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 +#: dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144 #: dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 #: dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 #: dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 #: dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 #: dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 -#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:260 +#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:261 #: dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 #: dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 #: dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 @@ -2535,14 +2527,14 @@ msgstr "L" # type: textblock #. type: textblock -#: dh:870 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 -#: dh_auto_install:89 dh_auto_test:62 dh_bugfiles:128 dh_builddeb:127 +#: dh:862 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 +#: dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124 #: dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103 #: dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 #: dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 #: dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 #: dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 -#: dh_installlogrotate:54 dh_installman:262 dh_installmanpages:201 +#: dh_installlogrotate:54 dh_installman:263 dh_installmanpages:201 #: dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 #: dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 #: dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 @@ -2601,7 +2593,7 @@ msgstr "" # type: textblock #. type: textblock #: dh_auto_build:30 dh_auto_clean:32 dh_auto_configure:33 dh_auto_install:45 -#: dh_auto_test:32 +#: dh_auto_test:33 msgid "" "See L> for a list of common build " "system selection and control options." @@ -2613,7 +2605,7 @@ msgstr "" # type: =item #. type: =item #: dh_auto_build:35 dh_auto_clean:37 dh_auto_configure:38 dh_auto_install:56 -#: dh_auto_test:37 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69 +#: dh_auto_test:38 dh_builddeb:35 dh_gencontrol:30 dh_installdebconf:69 #: dh_installinit:99 dh_makeshlibs:91 dh_shlibdeps:37 msgid "B<--> I" msgstr "B<--> I" @@ -2886,7 +2878,7 @@ msgstr "dh_auto_test - Exécute automatiquement le jeu d'essai d'un paquet" # type: textblock #. type: textblock -#: dh_auto_test:14 +#: dh_auto_test:15 msgid "" "B [S>] [S>] " "[S I>]" @@ -2896,7 +2888,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh_auto_test:18 +#: dh_auto_test:19 msgid "" "B is a debhelper program that tries to automatically run a " "package's test suite. It does so by running the appropriate command for the " @@ -2917,7 +2909,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh_auto_test:26 +#: dh_auto_test:27 msgid "" "This is intended to work for about 90% of packages with a test suite. If it " "doesn't work, you're encouraged to skip using B at all, and " @@ -2929,7 +2921,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh_auto_test:39 +#: dh_auto_test:40 msgid "" "Pass I to the program that is run. These can be used to supplement " "or override the any standard parameters that B passes." @@ -2940,7 +2932,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh_auto_test:46 +#: dh_auto_test:47 msgid "" "If the B environment variable contains B, no " "tests will be performed." @@ -4444,7 +4436,7 @@ msgstr "" # type: =item #. type: =item #: dh_installcron:44 dh_installifupdown:43 dh_installinit:104 -#: dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52 +#: dh_installlogcheck:44 dh_installlogrotate:26 dh_installmodules:52 #: dh_installpam:35 dh_installppp:39 dh_installudev:39 msgid "B<--name=>I" msgstr "B<--name=>I" @@ -5790,7 +5782,7 @@ msgstr "" # type: textblock #. type: textblock -#: dh_installlogcheck:48 +#: dh_installlogcheck:46 #, fuzzy #| msgid "" #| "Look for files named F and install them as " @@ -8525,6 +8517,28 @@ msgstr "Charte Debian, version 2.2" msgid "Andrew Stribblehill " msgstr "Andrew Stribblehill " +# type: verbatim +#~ msgid "" +#~ "To patch your package using quilt, you can tell B to use quilt's B\n" +#~ "sequence addons like this:\n" +#~ "\t\n" +#~ msgstr "" +#~ "Pour patcher un paquet en utilisant « quilt », il faut demander à B\n" +#~ "d'utiliser la séquence B propre à « quilt ». Voici comment faire :\n" +#~ "\t\n" + +# type: verbatim +#~ msgid "" +#~ "\t#!/usr/bin/make -f\n" +#~ "\t%:\n" +#~ "\t\tdh $@ --with quilt\n" +#~ "\n" +#~ msgstr "" +#~ "\t#!/usr/bin/make -f\n" +#~ "\t%:\n" +#~ "\t\tdh $@ --with quilt\n" +#~ "\n" + # type: =head2 #~ msgid "Debhelper compatibility levels" #~ msgstr "Niveaux de compatibilité de debhelper" -- cgit v1.2.3