From 18c41ad7f852905ddf59eede58d0697390d0b36a Mon Sep 17 00:00:00 2001
From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Mon, 1 Oct 2018 14:36:45 +0100
Subject: i18n: dgit: mark some messages (10)

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
---
 dgit | 167 +++++++++++++++++++++++++++++++++++++------------------------------
 1 file changed, 93 insertions(+), 74 deletions(-)

diff --git a/dgit b/dgit
index 77c85e5..32b024e 100755
--- a/dgit
+++ b/dgit
@@ -6149,7 +6149,7 @@ sub quilt_fixup_editor () {
 
 sub maybe_apply_patches_dirtily () {
     return unless $quilt_mode =~ m/gbp|unapplied/;
-    print STDERR <<END or confess $!;
+    print STDERR __ <<END or confess $!;
 
 dgit: Building, or cleaning with rules target, in patches-unapplied tree.
 dgit: Have to apply the patches - making the tree dirty.
@@ -6162,7 +6162,7 @@ END
 }
 
 sub maybe_unapply_patches_again () {
-    progress "dgit: Unapplying patches again to tidy up the tree."
+    progress __ "dgit: Unapplying patches again to tidy up the tree."
 	if $patches_applied_dirtily;
     runcmd qw(dpkg-source --after-build .)
 	if $patches_applied_dirtily & 01;
@@ -6195,7 +6195,8 @@ sub clean_tree () {
 	my $leftovers = cmdoutput @git, qw(clean -xdn);
 	if (length $leftovers) {
 	    print STDERR $leftovers, "\n" or confess $!;
-	    fail "tree contains uncommitted files and --clean=check specified";
+	    fail __
+ "tree contains uncommitted files and --clean=check specified";
 	}
     } elsif ($cleanmode eq 'none') {
     } else {
@@ -6204,7 +6205,7 @@ sub clean_tree () {
 }
 
 sub cmd_clean () {
-    badusage "clean takes no additional arguments" if @ARGV;
+    badusage __ "clean takes no additional arguments" if @ARGV;
     notpushing();
     clean_tree();
     maybe_unapply_patches_again();
@@ -6217,7 +6218,8 @@ sub WANTSRC_BUILDER () { 02; } # caller should run dpkg-buildpackage
 sub build_or_push_prep_early () {
     our $build_or_push_prep_early_done //= 0;
     return if $build_or_push_prep_early_done++;
-    badusage "-p is not allowed with dgit $subcommand" if defined $package;
+    badusage f_ "-p is not allowed with dgit %s", $subcommand
+	if defined $package;
     my $clogp = parsechangelog();
     $isuite = getfield $clogp, 'Distribution';
     $package = getfield $clogp, 'Source';
@@ -6242,9 +6244,10 @@ sub build_prep ($) {
 	my $pat = changespat $version;
 	foreach my $f (glob "$buildproductsdir/$pat") {
 	    if (act_local()) {
-		unlink $f or fail "remove old changes file $f: $!";
+		unlink $f or
+		    fail f_ "remove old changes file %s: %s", $f, $!;
 	    } else {
-		progress "would remove $f";
+		progress f_ "would remove %s", $f;
 	    }
 	}
     }
@@ -6269,17 +6272,17 @@ sub changesopts_version () {
 	    1;
 	}) {
 	    print STDERR $@;
-	    fail
+	    fail __
  "archive query failed (queried because --since-version not specified)";
 	}
 	if (@vsns) {
 	    @vsns = map { $_->[0] } @vsns;
 	    @vsns = sort { -version_compare($a, $b) } @vsns;
 	    $changes_since_version = $vsns[0];
-	    progress "changelog will contain changes since $vsns[0]";
+	    progress f_ "changelog will contain changes since %s", $vsns[0];
 	} else {
 	    $changes_since_version = '_';
-	    progress "package seems new, not specifying -v<version>";
+	    progress __ "package seems new, not specifying -v<version>";
 	}
     }
     if ($changes_since_version ne '_') {
@@ -6322,14 +6325,14 @@ sub massage_dbp_args ($;$) {
 	$r |= WANTSRC_SOURCE  if grep { s/^full$/binary/ } @d;
 	$r |= WANTSRC_SOURCE  if grep { s/^source$// } @d;
 	$r |= WANTSRC_BUILDER if grep { m/./ } @d;
-	fail "Wanted to build nothing!" unless $r;
+	fail __ "Wanted to build nothing!" unless $r;
 	$dmode = '--build='. join ',', grep m/./, @d;
     } else {
 	$r =
 	  $dmode =~ m/[S]/     ?  WANTSRC_SOURCE :
 	  $dmode =~ y/gGF/ABb/ ?  WANTSRC_SOURCE | WANTSRC_BUILDER :
 	  $dmode =~ m/[ABb]/   ?                   WANTSRC_BUILDER :
-	  die "$dmode ?";
+	  confess "$dmode ?";
     }
     printdebug "massage done $r $dmode.\n";
     push @$cmd, $dmode;
@@ -6359,32 +6362,35 @@ sub postbuild_mergechanges ($) {
     } @changesfiles;
     my $result;
     if (@changesfiles==1) {
-	fail <<END.$msg_if_onlyone if defined $msg_if_onlyone;
-only one changes file from build (@changesfiles)
+	fail +(f_ <<END, "@changesfiles").$msg_if_onlyone
+only one changes file from build (%s)
 END
+	    if defined $msg_if_onlyone;
 	$result = $changesfiles[0];
     } elsif (@changesfiles==2) {
 	my $binchanges = parsecontrol($changesfiles[1], "binary changes file");
 	foreach my $l (split /\n/, getfield $binchanges, 'Files') {
-	    fail "$l found in binaries changes file $binchanges"
+	    fail f_ "%s found in binaries changes file %s", $l, $binchanges
 		if $l =~ m/\.dsc$/;
 	}
 	runcmd_ordryrun_local @mergechanges, @changesfiles;
 	my $multichanges = changespat $version,'multi';
 	if (act_local()) {
-	    stat_exists $multichanges
-		or fail "$multichanges unexpectedly not created by build";
+	    stat_exists $multichanges or fail f_
+		"%s unexpectedly not created by build", $multichanges;
 	    foreach my $cf (glob $pat) {
 		next if $cf eq $multichanges;
-		rename "$cf", "$cf.inmulti" or
-		    fail "install new changes $cf\{,.inmulti}: $!";
+		rename "$cf", "$cf.inmulti" or fail f_
+		    "install new changes %s\{,.inmulti}: %s", $cf, $!;
 	    }
 	}
 	$result = $multichanges;
     } else {
-	fail "wrong number of different changes files (@changesfiles)";
+	fail f_ "wrong number of different changes files (%s)",
+	        "@changesfiles";
     }
-    printdone "build successful, results in $result\n" or confess $!;
+    printdone f_ "build successful, results in %s\n", $result
+	or confess $!;
 }
 
 sub midbuild_checkchanges () {
@@ -6395,9 +6401,9 @@ sub midbuild_checkchanges () {
 	$_ ne changespat $version,'source' and
 	$_ ne changespat $version,'multi'
     } @unwanted;
-    fail <<END
-changes files other than source matching $pat already present; building would result in ambiguity about the intended results.
-Suggest you delete @unwanted.
+    fail +(f_ <<END, $pat, "@unwanted")
+changes files other than source matching %s already present; building would result in ambiguity about the intended results.
+Suggest you delete %s.
 END
 	if @unwanted;
 }
@@ -6414,15 +6420,15 @@ sub postbuild_mergechanges_vanilla ($) {
 	    postbuild_mergechanges(undef);
 	};
     } else {
-	printdone "build successful\n";
+	printdone __ "build successful\n";
     }
 }
 
 sub cmd_build {
     build_prep_early();
-    $buildproductsdir eq '..' or print STDERR <<END;
-$us: warning: build-products-dir set, but not supported by dpkg-buildpackage
-$us: warning: build-products-dir will be ignored; files will go to ..
+    $buildproductsdir eq '..' or print STDERR +(f_ <<END, $us, $us);
+%s: warning: build-products-dir set, but not supported by dpkg-buildpackage
+%s: warning: build-products-dir will be ignored; files will go to ..
 END
     $buildproductsdir = '..';
     my @dbp = (@dpkgbuildpackage, qw(-us -uc), changesopts_initial(), @ARGV);
@@ -6533,7 +6539,7 @@ sub build_source {
     $sourcechanges = changespat $version,'source';
     if (act_local()) {
 	unlink "$buildproductsdir/$sourcechanges" or $!==ENOENT
-	    or fail "remove $sourcechanges: $!";
+	    or fail f_ "remove %s: %s", $sourcechanges, $!;
     }
     my @cmd = (@dpkgsource, qw(-b --));
     my $leafdir;
@@ -6570,7 +6576,7 @@ sub build_source {
 	my ($why, $l) = @_;
         printdebug " renaming ($why) $l\n";
         rename "$l", bpd_abs()."/$l"
-	    or fail "put in place new built file ($l): $!";
+	    or fail f_ "put in place new built file (%s): %s", $l, $!;
     };
     foreach my $l (split /\n/, getfield $dsc, 'Files') {
         $l =~ m/\S+$/ or next;
@@ -6583,28 +6589,31 @@ sub build_source {
 }
 
 sub cmd_build_source {
-    badusage "build-source takes no additional arguments" if @ARGV;
+    badusage __ "build-source takes no additional arguments" if @ARGV;
     build_prep(WANTSRC_SOURCE);
     build_source();
     maybe_unapply_patches_again();
-    printdone "source built, results in $dscfn and $sourcechanges";
+    printdone f_ "source built, results in %s and %s",
+	         $dscfn, $sourcechanges;
 }
 
 sub cmd_push_source {
     prep_push();
-    fail "dgit push-source: --include-dirty/--ignore-dirty does not make".
-      "sense with push-source!" if $includedirty;
+    fail __
+	"dgit push-source: --include-dirty/--ignore-dirty does not make".
+	"sense with push-source!"
+	if $includedirty;
     build_maybe_quilt_fixup();
     if ($changesfile) {
         my $changes = parsecontrol("$buildproductsdir/$changesfile",
-                                   "source changes file");
+                                   __ "source changes file");
         unless (test_source_only_changes($changes)) {
-            fail "user-specified changes file is not source-only";
+            fail __ "user-specified changes file is not source-only";
         }
     } else {
         # Building a source package is very fast, so just do it
 	build_source();
-	die "er, patches are applied dirtily but shouldn't be.."
+	confess "er, patches are applied dirtily but shouldn't be.."
 	    if $patches_applied_dirtily;
 	$changesfile = $sourcechanges;
     }
@@ -6618,9 +6627,10 @@ sub binary_builder {
     midbuild_checkchanges();
     in_bpd {
 	if (act_local()) {
-	    stat_exists $dscfn or fail "$dscfn (in build products dir): $!";
-	    stat_exists $sourcechanges
-		or fail "$sourcechanges (in build products dir): $!";
+	    stat_exists $dscfn or fail f_
+		"%s (in build products dir): %s", $dscfn, $!;
+	    stat_exists $sourcechanges or fail f_
+		"%s (in build products dir): %s", $sourcechanges, $!;
 	}
 	runcmd_ordryrun_local @$bbuilder, @args;
     };
@@ -6632,7 +6642,7 @@ sub binary_builder {
 
 sub cmd_sbuild {
     build_prep_early();
-    binary_builder(\@sbuild, <<END, qw(-d), $isuite, @ARGV, $dscfn);
+    binary_builder(\@sbuild, (__ <<END), qw(-d), $isuite, @ARGV, $dscfn);
 perhaps you need to pass -A ?  (sbuild's default is to build only
 arch-specific binaries; dgit 1.4 used to override that.)
 END
@@ -6644,11 +6654,13 @@ sub pbuilder ($) {
     # @ARGV is allowed to contain only things that should be passed to
     # pbuilder under debbuildopts; just massage those
     my $wantsrc = massage_dbp_args \@ARGV;
-    fail "you asked for a builder but your debbuildopts didn't ask for".
-      " any binaries -- is this really what you meant?"
-      unless $wantsrc & WANTSRC_BUILDER;
-    fail "we must build a .dsc to pass to the builder but your debbuiltopts".
-      " forbids the building of a source package; cannot continue"
+    fail __
+	"you asked for a builder but your debbuildopts didn't ask for".
+	" any binaries -- is this really what you meant?"
+	unless $wantsrc & WANTSRC_BUILDER;
+    fail __
+	"we must build a .dsc to pass to the builder but your debbuiltopts".
+	" forbids the building of a source package; cannot continue"
       unless $wantsrc & WANTSRC_SOURCE;
     # We do not want to include the verb "build" in @pbuilder because
     # the user can customise @pbuilder and they shouldn't be required
@@ -6677,7 +6689,8 @@ sub cmd_quilt_fixup {
 }
 
 sub cmd_print_unapplied_treeish {
-    badusage "incorrect arguments to dgit print-unapplied-treeish" if @ARGV;
+    badusage __ "incorrect arguments to dgit print-unapplied-treeish"
+	if @ARGV;
     my $headref = git_rev_parse('HEAD');
     my $clogp = commit_getclogp $headref;
     $package = getfield $clogp, 'Source';
@@ -6698,9 +6711,9 @@ sub import_dsc_result {
     my ($dstref, $newhash, $what_log, $what_msg) = @_;
     my @cmd = (git_update_ref_cmd $what_log, $dstref, $newhash);
     runcmd @cmd;
-    check_gitattrs($newhash, "source tree");
+    check_gitattrs($newhash, __ "source tree");
 
-    progress "dgit: import-dsc: $what_msg";
+    progress f_ "dgit: import-dsc: %s", $what_msg;
 }
 
 sub cmd_import_dsc {
@@ -6713,14 +6726,16 @@ sub cmd_import_dsc {
 	if (m/^--require-valid-signature$/) {
 	    $needsig = 1;
 	} else {
-	    badusage "unknown dgit import-dsc sub-option \`$_'";
+	    badusage f_ "unknown dgit import-dsc sub-option \`%s'", $_;
 	}
     }
 
-    badusage "usage: dgit import-dsc .../PATH/TO/.DSC BRANCH" unless @ARGV==2;
+    badusage __ "usage: dgit import-dsc .../PATH/TO/.DSC BRANCH"
+	unless @ARGV==2;
     my ($dscfn, $dstbranch) = @ARGV;
 
-    badusage "dry run makes no sense with import-dsc" unless act_local();
+    badusage __ "dry run makes no sense with import-dsc"
+	unless act_local();
 
     my $force = $dstbranch =~ s/^\+//   ? +1 :
 	        $dstbranch =~ s/^\.\.// ? -1 :
@@ -6736,14 +6751,14 @@ sub cmd_import_dsc {
     my $chead = cmdoutput_errok @symcmd;
     defined $chead or $?==256 or failedcmd @symcmd;
 
-    fail "$dstbranch is checked out - will not update it"
+    fail f_ "%s is checked out - will not update it", $dstbranch
 	if defined $chead and $chead eq $dstbranch;
 
     my $oldhash = git_get_ref $dstbranch;
 
-    open D, "<", $dscfn or fail "open import .dsc ($dscfn): $!";
+    open D, "<", $dscfn or fail f_ "open import .dsc (%s): %s", $dscfn, $!;
     $dscdata = do { local $/ = undef; <D>; };
-    D->error and fail "read $dscfn: $!";
+    D->error and fail f_ "read %s: %s", $dscfn, $!;
     close C;
 
     # we don't normally need this so import it here
@@ -6754,13 +6769,13 @@ sub cmd_import_dsc {
 	local $SIG{__WARN__} = sub {
 	    print STDERR $_[0];
 	    return unless $needsig;
-	    fail "import-dsc signature check failed";
+	    fail __ "import-dsc signature check failed";
 	};
 	if (!$dp->is_signed()) {
-	    warn "$us: warning: importing unsigned .dsc\n";
+	    warn f_ "%s: warning: importing unsigned .dsc\n", $us;
 	} else {
 	    my $r = $dp->check_signature();
-	    die "->check_signature => $r" if $needsig && $r;
+	    confess "->check_signature => $r" if $needsig && $r;
 	}
     }
 
@@ -6768,7 +6783,7 @@ sub cmd_import_dsc {
 
     $package = getfield $dsc, 'Source';
 
-    parse_dsc_field($dsc, "Dgit metadata in .dsc")
+    parse_dsc_field($dsc, __ "Dgit metadata in .dsc")
 	unless forceing [qw(import-dsc-with-dgit-field)];
     parse_dsc_field_def_dsc_distro();
 
@@ -6778,7 +6793,8 @@ sub cmd_import_dsc {
     notpushing();
 
     if (defined $dsc_hash) {
-	progress "dgit: import-dsc of .dsc with Dgit field, using git hash";
+	progress __
+	    "dgit: import-dsc of .dsc with Dgit field, using git hash";
 	resolve_dsc_field_commit undef, undef;
     }
     if (defined $dsc_hash) {
@@ -6786,29 +6802,29 @@ sub cmd_import_dsc {
 		   "echo $dsc_hash | git cat-file --batch-check");
 	my $objgot = cmdoutput @cmd;
 	if ($objgot =~ m#^\w+ missing\b#) {
-	    fail <<END
-.dsc contains Dgit field referring to object $dsc_hash
+	    fail f_ <<END, $dsc_hash
+.dsc contains Dgit field referring to object %s
 Your git tree does not have that object.  Try `git fetch' from a
 plausible server (browse.dgit.d.o? alioth?), and try the import-dsc again.
 END
 	}
 	if ($oldhash && !is_fast_fwd $oldhash, $dsc_hash) {
 	    if ($force > 0) {
-		progress "Not fast forward, forced update.";
+		progress __ "Not fast forward, forced update.";
 	    } else {
-		fail "Not fast forward to $dsc_hash";
+		fail f_ "Not fast forward to %s", $dsc_hash;
 	    }
 	}
 	import_dsc_result $dstbranch, $dsc_hash,
 	    "dgit import-dsc (Dgit): $info",
-	    "updated git ref $dstbranch";
+	    f_ "updated git ref %s", $dstbranch;
 	return 0;
     }
 
-    fail <<END
-Branch $dstbranch already exists
-Specify ..$specbranch for a pseudo-merge, binding in existing history
-Specify  +$specbranch to overwrite, discarding existing history
+    fail f_ <<END, $dstbranch, $specbranch, $specbranch
+Branch %s already exists
+Specify ..%s for a pseudo-merge, binding in existing history
+Specify  +%s to overwrite, discarding existing history
 END
 	if $oldhash && !$force;
 
@@ -6818,19 +6834,22 @@ END
 	my $here = "$buildproductsdir/$f";
 	if (lstat $here) {
 	    next if stat $here;
-	    fail "lstat $here works but stat gives $! !";
+	    fail f_ "lstat %s works but stat gives %s !", $here, $!;
 	}
-	fail "stat $here: $!" unless $! == ENOENT;
+	fail f_ "stat %s: %s", $here, $! unless $! == ENOENT;
 	my $there = $dscfn;
 	if ($dscfn =~ m#^(?:\./+)?\.\./+#) {
 	    $there = $';
 	} elsif ($dscfn =~ m#^/#) {
 	    $there = $dscfn;
 	} else {
-	    fail "cannot import $dscfn which seems to be inside working tree!";
+	    fail f_
+		"cannot import %s which seems to be inside working tree!",
+		$dscfn;
 	}
-	$there =~ s#/+[^/]+$## or
-	    fail "import $dscfn requires ../$f, but it does not exist";
+	$there =~ s#/+[^/]+$## or fail f_
+	    "import %s requires ../%s, but it does not exist",
+	    $dscfn, $f;
 	$there .= "/$f";
 	my $test = $there =~ m{^/} ? $there : "../$there";
 	stat $test or fail "import $dscfn requires $test, but: $!";
-- 
cgit v1.2.3