.TH dgit 1 "" "Debian Project" "dgit"
.SH NAME
dgit \- git integration with the Debian archive
.
.SH SYNOPSIS
.B dgit
[\fIdgit\-opts\fP] \fBclone\fP [\fIdgit\-opts\fP]
\fIpackage\fP [\fIsuite\fP] [\fB./\fP\fIdir|\fB/\fP\fIdir\fR]
.br
.B dgit
[\fIdgit\-opts\fP] \fBfetch\fP|\fBpull\fP [\fIdgit\-opts\fP]
[\fIsuite\fP]
.br
.B dgit
[\fIdgit\-opts\fP] \fBbuild\fP|\fBsbuild\fP|\fBbuild-source\fP
[\fIbuild\-opts\fp]
.br
.B dgit
[\fIdgit\-opts\fP] \fBpush\fP [\fIdgit\-opts\fP]
[\fIsuite\fP]
.br
.B dgit
[\fIdgit\-opts\fP] \fBrpush\fR \fIbuild-host\fR\fB:\fR\fIbuild-dir\fR
[\fIpush args...\fR]
.br
.B dgit
[\fIdgit\-opts\fP] \fIaction\fR ...
.SH DESCRIPTION
.B dgit
treats the Debian archive as a version control system, and
bidirectionally gateways between the archive and git.  The git view of
the package can contain the usual upstream git history, and will be
augmented by commits representing uploads done by other developers not
using dgit.  This git history is stored in a canonical location known
as
.B dgit-repos
which lives outside the Debian archive (currently, on Alioth).

The usual workflow is: 1. clone or fetch; 2. make and commit changes
in git as desired; 3. run dgit build, dgit sbuild or dgit
build-source, or generate the source and binary packages for upload
some other way; 4. do pre-upload tests of the proposed upload; 5. run
dgit push.
.TP
\fBdgit clone\fR \fIpackage\fP [\fIsuite\fP] [\fB./\fP\fIdir|\fB/\fP\fIdir\fR]
Consults the archive and dgit-repos to construct the git view of
history for
.I package
in
.I suite
.RB ( sid
by default)
in a new directory (named
.BI ./ package
by default);
also, downloads any necessary orig tarballs.

The suite's git tip is
left on the local branch
.BI dgit/ suite
ready for work, and on the corresponding dgit remote tracking branch.
The
.B origin
remote will be set up to point to the package's dgit-repos tree
for the distro to which
.I suite
belongs.

For your convenience, the
.B vcs-git
remote will be set up from the package's Vcs-Git field, if there is
one - but note that in the general case the history found there may be
different to or even disjoint from dgit's view.
.TP
\fBdgit fetch\fR [\fIsuite\fP]
Consults the archive and git-repos to update the git view of
history for a specific suite (and downloads any necessary orig
tarballs), and updates the remote tracking branch
.BR remotes/dgit/dgit/ \fIsuite\fR.
If the current branch is
.BI dgit/ suite
then dgit fetch defaults to
.IR suite ;
otherwise it parses debian/changelog and uses the suite specified
there.
.TP
\fBdgit pull\fR [\fIsuite\fP]
Does dgit fetch, and then merges the new head of the remote tracking
branch
.BI remotes/dgit/dgit/ suite
into the current branch.
.TP
\fBdgit build\fR ...
Runs
.B dpkg-buildpackage
with some suitable options.  Options and argumments after build
will be passed on to dpkg-buildpackage.  It is not necessary to use
dgit build when using dgit; it is OK to use any approach which ensures
that the generated source package corresponds to the relevant git
commit.

Tagging, signing and actually uploading should be left to dgit push.
.TP
\fBdgit build-source\fR ...
Builds the source package, and a changes file for a prospective
source-only upload, using
.BR dpkg-source .
The output is left in
.IR package \fB_\fR version \fB.dsc\fR
and
.IR package \fB_\fR version \fB_source.changes\fR.

Tagging, signing and actually uploading should be left to dgit push.
.TP
.B dgit clean
Cleans the current working tree (according to the --clean= option in
force).
.TP
.B dgit help
Print a usage summary.
.TP
\fBdgit sbuild\fR ...
Constructs the source package, uses
.B  sbuild
to do a binary build, and uses mergechanges to merge the source and
binary changes files.  Options and argumments after sbuild will be
passed on to sbuild.  Changes files matching
.IB package _ version _*.changes
in the parent directory will be removed; the output is left in
.IR package \fB_\fR version \fB_multi.changes\fR.

Tagging, signing and actually uploading should be left to dgit push.
.TP
\fBdgit git-build\fR ...
Runs
.B git-buildpackage
with some suitable options.  Options and argumments after git-build
will be passed on to git-buildpackage.

Tagging, signing and actually uploading should be left to dgit push.
.TP
\fBdgit push\fR [\fIsuite\fP]
Does an `upload', pushing the current HEAD to the archive (as a source
package) and to dgit-repos (as git commits).  The package must already
have been built ready for upload, with the .dsc and .changes
left in the parent directory.

In more detail: dgit push checks that the current HEAD corresponds to
the .dsc.  It then pushes the HEAD to the suite's dgit-repos branch,
makes a signed git tag, edits the .dsc to contain the dgit metadata
field, runs debsign to sign the upload (.dsc and .changes), pushes the
signed tag, and finally uses dput to upload the .changes to the
archive.

dgit push always uses the package, suite and version specified in the
debian/changelog and the .dsc, which must agree.  If the command line
specifies a suite then that must match too.

If dgit push fails while uploading, it is fine to simply retry the
dput on the .changes file at your leisure.
.TP
\fBdgit rpush\fR \fIbuild-host\fR\fB:\fR\fIbuild-dir\fR [\fIpush args...\fR]
Pushes the contents of the specified directory on a remote machine.
This is like running dgit push on build-host with build-dir as the
current directory; however, signing operations are done on the
invoking host.  This allows you to do a push when the system which has
the source code and the build outputs has no access to the key.

However, the build-host must be able to ssh to the dgit repos.  If
this is not already the case, you must organise it separately, for
example by the use of ssh agent forwarding.

The remaining arguments are treated just as dgit push would handle
them.

build-host and build\-dir can be passed as separate
arguments; this is assumed to be the case if the first argument
contains no : (except perhaps one in [ ], to support IPv6 address
literals).

You will need similar enough versions of dgit on the build-host and
the invocation host.  The build-host needs gnupg installed, with your
public key in its keyring (but not your private key, obviously).
.TP
.B dgit quilt-fixup
Looks to see if the tree is one which dpkg-source cannot properly
represent.  If it isn't, dgit will fix it up for you (in quilt terms,
by making a new debian/ patch containing your unquilty changes) and
make a commit of the changes it has made.

This is normally done automatically by dgit build and dgit push.
.TP
.B dgit version
Prints version information and exits.
.SH OPTIONS
.TP
.BR --dry-run | -n
Go through the motions, fetching all information needed, but do not
actually update the output(s).  For push, dgit does
the required checks and leaves the new .dsc in a temporary file,
but does not sign, tag, push or upload.
.TP
.BR --damp-run | -L
Go through many more of the motions: do everything that doesn't
involve either signing things, or making changes on the public
servers.
.TP
.BI -k keyid
Use
.I keyid
for signing the tag and the upload.
.TP
.BR --no-sign
does not sign tags or uploads (meaningful only with push).
.TP
.TP
.BI -p package
Specifies that we should process source package
.I package
rather than looking in debian/control or debian/changelog.
Valid with dgit fetch and dgit pull, only.
.TP
.BR --clean=git | -wg
The source tree should be cleaned, before building a source package
with one of the build options, using
.BR "git clean -xdf" .
This will delete all files which are not tracked by git.
.TP
.BR --clean=none | -wn
Do not clean the tree before building a source package.  If there are
files which are not in git, a subsequent dgit push will fail.
.TP
.BR --clean=dpkg-source | -wd
Use dpkg-buildpackage to do the clean, so that the source package
is cleaned by dpkg-source running the package's clean target.
This is the default.  It requires the package's build dependencies.
.TP
.BR -N | --new
The package may be new in this suite.  Without this, dgit will
refuse to push.
.TP
.BR --ignore-dirty
Do not complain if the working tree does not match your git HEAD.
This can be useful with build, if you plan to commit later.  (dgit
push will still ensure that the .dsc you upload and the git tree
you push are identical, so this option won't make broken pushes.)

This option may not work properly on `3.0 (quilt)' packages, as in
that case dgit needs to use and perhaps commit parts of your working
tree.
.TP
.BR --no-quilt-fixup
Do not fix up source format `3.0 (quilt)' metadata.  If you use this
option and the package did in fact need fixing up, dgit push will
fail.
.TP
.BI -D
Prints debugging information to stderr.  Repeating the option produces
more output (currently, up to -DD is meaningfully different).
.TP
.BI -c name = value
Specifies a git configuration option.  dgit itself is also controlled
by git configuration options.
.TP
.RI \fB-v\fR version "|\fB_\fR | " \fB--since-version=\fR version |\fB_\fR
Specifies the
.BI -v version
option to pass to dpkg-genchanges, during builds.  Changes (from
debian/changelog) since this version will be included in the built
changes file, and hence in the upload.  If this option is not
specified, dgit will query the archive and use the latest version
uploaded to the intended suite.

Specifying
.B _
inhibits this, so that no -v option will be passed to dpkg-genchanges
(and as a result, only the last stanza from debian/changelog will
be used for the build and upload).
.TP
.RI \fB-m\fR maintaineraddress
Passed to dpkg-genchanges (eventually).
.TP
.RI \fB--ch:\fR option
Specifies a single additional option to pass, eventually, to
dpkg-genchanges.
.TP
.RI \fB--curl=\fR program |\fB--dput=\fR program |...
Specifies alternative programs to use instead of
.BR curl ,
.BR dput ,
.BR debsign ,
.BR dpkg-source ,
.BR dpkg-buildpackage ,
.BR dpkg-genchanges ,
.BR sbuild ,
.BR gpg ,
.BR ssh ,
.BR dgit ,
or
.BR mergechanges .

For dpkg-buildpackage, dpkg-genchanges, mergechanges and sbuild,
this applies only when the program is invoked directly by dgit.

For dgit, specifies the command to run on the remote host when dgit
rpush needs to invoke a remote copy of itself.  (dgit also reinvokes
itself as the EDITOR for dpkg-source --commit; this is done using
argv[0], and is not affected by --dgit=).

For ssh, the default value is taken from the
.B DGIT_SSH
or
.B GIT_SSH
environment variables, if set (see below).  And, for ssh, when accessing the
archive and dgit-repos, this command line setting is overridden by the
git config variables
.BI dgit-distro. distro .ssh
and
.B .dgit.default.ssh
(which can in turn be overridden with -c).  Also, when dgit is using
git to access dgit-repos, only git's idea of what ssh to use (eg,
.BR GIT_SSH )
is relevant.
.TP
.RI \fB--curl:\fR option |\fB--dput:\fR option |...
Specifies a single additional option to pass to
.BR curl ,
.BR dput ,
.BR debsign ,
.BR dpkg-source ,
.BR dpkg-buildpackage ,
.BR dpkg-genchanges ,
.BR sbuild ,
.BR ssh ,
.BR dgit ,
or
.BR mergechanges .
Can be repeated as necessary.

For dpkg-buildpackage, dpkg-genchanges, mergechanges and sbuild,
this applies only when the program is invoked directly by dgit.
Usually, for passing options to dpkg-genchanges, you should use
.BR --ch: \fIoption\fR.

See notes above regarding ssh and dgit.

NB that --gpg:option is not supported (because debsign does not
have that facility).  But see -k.
.TP
.BR -d "\fIdistro\fR | " --distro= \fIdistro\fR
Specifies that the suite to be operated on is part of distro
.IR distro .
This overrides the default value found from the git config option
.BR dgit-suite. \fIsuite\fR .distro .
The only effect is that other configuration variables (used
for accessing the archive and dgit-repos) used are
.BR dgit-distro. \fIdistro\fR .* .

If your suite is part of a distro that dgit already knows about, you
can use this option to make dgit work even if your dgit doesn't know
about the suite.  For example, specifying
.B -ddebian
will work when the suite is an unknown suite in the Debian archive.

To define a new distro it is necessary to define methods and URLs
for fetching (and, for dgit push, altering) a variety of information both
in the archive and in dgit-repos.  How to do this is not yet
documented, and currently the arrangements are unpleasant.  See
BUGS.
.TP
.BI -C changesfile
Specifies the .changes file which is to be uploaded.  By default
dgit push looks for single .changes file in the parent directory whose
filename suggests it is for the right package and version - or,
if there is a _multi.changes file, dgit uses that.

If the specified
.I changesfile
pathname contains slashes, the directory part is also used as
the value for
.BR --build-products-dir ;
otherwise, the changes file is expected in that directory (by
default, in
.BR .. ).
.TP
.BI --build-products-dir= directory
Specifies where to find the built files to be uploaded.
By default, dgit looks in the parent directory
.BR .. ).
.TP
.BI --existing-package= package
dgit push needs to canonicalise the suite name.  Sometimes, dgit
lacks a way to ask the archive to do this without knowing the
name of an existing package.  Without --new we can just use the
package we are trying to push.  But with --new that will not work, so
we guess
.B dpkg
or use the value of this option.  This option is not needed with the
default mechanisms for accessing the archive.
.TP
.BR -h | --help
Print a usage summary.
.TP
.BI --initiator-tempdir= directory
dgit rpush uses a temporary directory on the invoking (signing) host.
This option causes dgit to use
.I directory
instead.  Furthermore, the specified directory will be emptied,
removed and recreated before dgit starts, rather than removed
after dgit finishes.  The directory specified must be an absolute
pathname.
.TP
.BI --no-rm-on-error
Do not delete the destination directory if clone fails.
.SH WORKFLOW - SIMPLE
It is always possible with dgit to clone or fetch a package, make
changes in git (using git-commit) on the suite branch
.RB ( "git checkout dgit/" \fIsuite\fR)
and then dgit push.  You can use whatever gitish techniques you like
to construct the commit to push; the only requirement is that it is a
descendant of the state of the archive, as provided by dgit in the
remote tracking branch
.BR remotes/dgit/dgit/ \fIsuite\fR.

If you are lucky the other uploaders have also used dgit and
integrated the other relevant git history; if not you can fetch it
into your tree and cherry-pick etc. as you wish.
.SH WORKFLOW - INTEGRATING BETWEEN DGIT AND OTHER GIT HISTORY
If you are the maintainer of a package dealing with uploads made
without dgit, you will probably want to merge the synthetic commits
(made by dgit to represent the uploads) into your git history.
Normally you can just merge the dgit branch into your own master, or
indeed if you do your work on the dgit local suite branch
.BI dgit/ suite
you can just use dgit pull.

However the first time dgit is used it will generate a new origin
commit from the archive which won't be linked into the rest of your
git history.  You will need to merge this.

If last upload was in fact made with git, you should usually proceed
as follows: identify the commit which was actually used to build the
package.  (Hopefully you have a tag for this.)  Check out the dgit
branch
.RB ( "git checkout dgit/" \fIsuite\fR)
and merge that other commit
.RB ( "git merge debian/" \fIversion\fR).
Hopefully this merge will be trivial because the two trees should
be the same.  The resulting branch head can be merged into your
working branches
.RB ( "git checkout master && git merge dgit/" \fIsuite\fR).

If last upload was not made with git, a different approach is required
to start using dgit.  First, do
.B dgit fetch
(or clone) to obtain a git history representation of what's in the
archive and record it in the
.BI remotes/dgit/dgit/ suite
tracking branch.  Then somehow, using your other git history
plus appropriate diffs and cherry picks from the dgit remote tracking
branch, construct a git commit whose tree corresponds to the tree to use for the
next upload.  If that commit-to-be-uploaded is not a descendant of the
dig remote tracking branch, check it out and say
.BR "git merge -s ours remotes/dgit/dgit/" \fIsuite\fR;
that tells git that we are deliberately throwing away any differences
between what's in the archive and what you intend to upload.
Then run
.BR "dgit push"
to actually upload the result.
.SH MODEL
You may use any suitable git workflow with dgit, provided you
satisfy dgit's requirements:

dgit maintains a pseudo-remote called
.BR dgit ,
with one branch per suite.  This remote cannot be used with
plain git.

The
.B dgit-repos
repository for each package contains one ref per suite named
\fBrefs/dgit/\fR\fIsuite\fR.  These should be pushed to only by
dgit.  They are fast forwarding.  Each push on this branch
corresponds to an upload (or attempted upload).

However, it is perfectly fine to have other branches in dgit-repos;
normally the dgit-repos repo for the package will be accessible via
the remote name `origin'.

dgit push will also (by default) make signed tags called
.BI debian/ version
and push them to dgit-repos, but nothing depends on these tags
existing.

dgit push can operate on any commit which is a descendant of the
current dgit/suite tip in dgit-repos.

Uploads made by dgit contain an additional field
.B Dgit
in the source package .dsc.  (This is added by dgit push.)
This specifies a commit (an ancestor of the dgit/suite
branch) whose tree is identical to the unpacked source upload.

Uploads not made by dgit are represented in git by commits which are
synthesised by dgit.  The tree of each such commit corresponds to the
unpacked source; there is an origin commit with the contents, and a
psuedo-merge from last known upload - that is, from the contents of
the dgit/suite branch.

dgit expects repos that it works with to have a
.B dgit
remote.  This refers to the well-known dgit-repos location
(currently, the dgit-repos project on Alioth).  dgit fetch updates
the remote tracking branch for dgit/suite.

dgit does not (currently) represent the orig tarball(s) in git.  The
orig tarballs are downloaded (by dgit clone) into the parent
directory, as with a traditional (non-gitish) dpkg-source workflow.
You need to retain these tarballs in the parent directory for dgit
build and dgit push.

To a user looking at the archive, changes pushed using dgit look like
changes made in an NMU: in a `3.0 (quilt)' package the delta from the
previous upload is recorded in a new patch constructed by dpkg-source.
.SH READ-ONLY DISTROS
Distros which do not maintain a set of dgit history git repositories
can still be used in a read-only mode with dgit.  Currently Ubuntu
is configured this way.
.SH PACKAGE SOURCE FORMATS
If you are not the maintainer, you do not need to worry about the
source format of the package.  You can just make changes as you like
in git.  If the package is a `3.0 (quilt)' package, the patch stack
will usually not be represented in the git history.

If you are the maintainer of a non-native package, you currently have
two sensible options:

Firstly, you can regard your git history as primary, and the archive
as an export format.  For example, you could maintain topic branches
in git and a fast-forwarding release branch; or you could do your work
directly in a merging way on the
.BI dgit/ suite
branches.  If you do this you should probably use a `1.0' format
source package if you can.  In the archive, the delta between upstream
will be represented in the single Debian patch.

Secondly, you can use `3.0 (quilt)', and regard your quiltish patch
stack in the archive as primary.  You will have to use other tools
besides dgit to import and export this patch stack.  But see below:
.SH FORMAT 3.0 (QUILT)
For a format `3.0 (quilt)' source package, dgit may have to make a
commit on your current branch to contain metadata used by quilt and
dpkg-source.

This is because (i) the `3.0 (quilt)' source format cannot represent
certain trees, and (ii) packing up a tree in `3.0 (quilt)' and then
unpacking it does not always yield the same tree.  Instead,
dpkg-source insists on the trees having extra quilty metadata and
patch files in the debian/ and .pc/ directories, which dpkg-source
sometimes modifies.

dgit will automatically work around this braindamage for you when
building and pushing.  The only thing you need to know is that dgit
build, sbuild, etc., may make a new commit on your HEAD.  If you're
not a quilt user this commit won't contain any changes to files you
care about.

You can explicitly request that dgit do just this fixup, by running
dgit quilt-fixup.

We recommend against the use of `3.0 (quilt)'.
.SH FILES IN THE SOURCE PACKAGE BUT NOT IN GIT
This section is mainly of interest to maintainers who want to use dgit
with their existing git history for the Debian package.

Some developers like to have an extra-clean git tree which lacks files
which are normally found in source tarballs and therefore in Debian
source packages.  For example, it is conventional to ship ./configure
in the source tarball, but some people prefer not to have it present
in the git view of their project.

dgit requires that the source package unpacks to exactly the same
files as are in the git commit on which dgit push operates.  So if you
just try to dgit push directly from one of these extra-clean git
branches, it will fail.

As the maintainer you therefore have the following options:
.TP
\(bu
Persuade upstream that the source code in their git history and the
source they ship as tarballs should be identical.  Of course simply
removing the files from the tarball may make the tarball hard for
people to use.
.IP
One answer is to commit the (maybe autogenerated)
files, perhaps with some simple automation to deal with conflicts and
spurious changes.  This has the advantage that someone who clones
the git repository finds the program just as easy to build as someone
who uses the tarball.
.TP
\(bu
Have separate git branches which do contain the extra files, and after
regenerating the extra files (whenever you would have to anyway),
commit the result onto those branches.
.TP
\(bu
Provide source packages which lack the files you don't want
in git, and arrange for your package build to create them as needed.
This may mean not using upstream source tarballs and makes the Debian
source package less useful for people without Debian build
infrastructure.
.LP
Of course it may also be that the differences are due to build system
bugs, which cause unintended files to end up in the source package.
dgit will notice this and complain.  You may have to fix these bugs
before you can unify your existing git history with dgit's.
.SH CONFIGURATION
dgit looks at the following git config keys to control its behaviour.
You may set them with git-config (either in system-global or per-tree
configuration), or provide
.BI -c key = value
on the dgit command line.
.TP
.BI dgit-suite. suite .distro
.TP
.BI dgit.default.distro
.TP
.BI dgit-distro. distro .username
.TP
.BI dgit-distro. distro .git-url
.TP
.BI dgit-distro. distro .git-user
.TP
.BI dgit-distro. distro .git-host
.TP
.BI dgit-distro. distro .git-proto
.TP
.BI dgit-distro. distro .git-path
.TP
.BI dgit-distro. distro .git-check
.TP
.BI dgit-distro. distro .git-create
.TP
.BI dgit-distro. distro .upload-host
.TP
.BI dgit-distro. distro .mirror
.TP
.BI dgit-distro. distro .archive-query
.TP
.BI dgit-distro. distro .archive-query-default-component
.TP
.BI dgit-distro. distro .sshpsql-user
.TP
.BI dgit-distro. distro .sshpsql-host
.TP
.BI dgit-distro. distro .sshpsql-dbname
.TP
.BI dgit-distro. distro .ssh
.TP
.BI dgit-distro. distro .keyid
.TP
.BR dgit.default. *
for each
.BR dgit-distro. \fIdistro\fR . *
.SH ENVIRONMENT VARIABLES
.TP
.BR DGIT_SSH ", " GIT_SSH
specify an alternative default program (and perhaps arguments) to use
instead of ssh.  DGIT_SSH is consulted first and may contain arguments;
if it contains any whitespace will be passed to the shell.  GIT_SSH
specifies just the program; no arguments can be specified, so dgit
interprets it the same way as git does.
See
also the --ssh= and --ssh: options.
.TP
.BR gpg ", " dpkg- "..., " debsign ", " git ", " curl ", " dput ", " LWP::UserAgent
and other subprograms and modules used by dgit are affected by various
environment variables.  Consult the documentaton for those programs
for details.
.SH BUGS
We should be using some kind of vhost/vpath setup for the git repos on
alioth, so that they can be moved later if and when this turns out to
be a good idea.

dgit push should perhaps do `git push origin', or something similar,
by default.

Debian does not have a working rmadison server, so to find out what
version of a package is in the archive, or to canonicalise suite
names, we ssh directly into the ftpmaster server and run psql there to
access the database.

The mechanism for checking for and creating per-package repos on
alioth is a hideous bodge.  One consequence is that dgit currently
only works for people with push access.

Debian Maintainers are currently not able to push, as there is not
currently any mechanism for determining and honouring the archive's
ideas about access control.  Currently only DDs can push.

dgit's representation of format `3.0 (quilt)' source packages does not
represent the patch stack.  Currently the patch series representation
cannot round trip through the archive.  Ideally dgit would represent a
quilty package with an origin commit of some kind followed by the
patch stack as a series of commits followed by a pseudo-merge (to make
the branch fast-forwarding).  This would also mean a new `dgit
rebase-prep' command or some such to turn such a fast-forwarding
branch back into a rebasing patch stack, and a `force' option to dgit
push (perhaps enabled automatically by a note left by rebase-prep)
which will make the required pseudo-merge.

If the dgit push fails halfway through, it should be restartable and
idempotent.  However this is not true for the git tag operation.
Also, it would be good to check that the proposed signing key is
available before starting work.

dgit's handling of .orig.tar.gz is not very sophisticated.  Ideally
the .orig.tar.gz could be transported via the git repo as git tags.
Doing this is made more complicated by the possibility of a `3.0
(quilt)' package with multiple .orig tarballs.

dgit's build functions, and dgit push, should not make any changes to
your current HEAD.  Sadly this is necessary for packages in the `3.0
(quilt)' source format.  This is ultimately due to design problems in
quilt and dpkg-source.

There should be an option which arranges for the `3.0 (quilt)'
autocommit to not appear on your HEAD, but instead only in the
remote tracking suite branch.

The option parser requires values to be cuddled to the option name.

dgit assumes knowledge of the archive database.  (The information dgit
needs is not currently available via any public online service with a
well-defined interface, let alone a secure one.)

--dry-run does not always work properly, as not doing some of the git
fetches may result in subsequent actions being different.  Doing a
non-dry-run dgit fetch first will help.
.SH SEE ALSO
\fBcurl\fP(1),
\fBdput\fP(1),
\fBdebsign\fP(1),
\fBgit-config\fP(1),
\fBgit-buildpackage\fP(1),
\fBdpkg-buildpackage\fP(1),
.br
https://wiki.debian.org/Alioth