From aeca756d010523c0adf95247c4d7164bba6b35d0 Mon Sep 17 00:00:00 2001
From: rmanfredi <rmanfredi@190e5f8e-a817-0410-acf6-e9863daed9af>
Date: Fri, 25 Aug 2006 22:35:20 +0000
Subject: This starts the dist-3.5 baseline.

git-svn-id: https://dist.svn.sourceforge.net/svnroot/dist/trunk/dist@11 190e5f8e-a817-0410-acf6-e9863daed9af
---
 Configure    | 1712 +++++++++++++++++++++++++++++++++++++++++-----------------
 patchlevel.h |    5 +-
 2 files changed, 1232 insertions(+), 485 deletions(-)

diff --git a/Configure b/Configure
index e8906f2..fc94aef 100755
--- a/Configure
+++ b/Configure
@@ -13,12 +13,12 @@
 #
 # Note: this Configure script was generated automatically. Rather than
 # working with this copy of Configure, you may wish to get metaconfig.
-# The dist package (which contains metaconfig) is available at
-#     http://sourceforge.net/projects/dist/
+# The dist package (which contains metaconfig) is available via SVN:
+#     svn co https://svn.sourceforge.net/svnroot/dist/trunk/dist
 
-# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp ram $
+# $Id: Head.U 6 2006-08-25 22:21:46Z rmanfredi $
 #
-# Generated on Sun Feb  8 21:03:36 MET 2004 [metaconfig 3.0 PL70]
+# Generated on Sat Aug 26 00:34:34 MEST 2006 [metaconfig 3.5 PL0]
 
 cat >c1$$ <<EOF
 ARGGGHHHH!!!!!
@@ -170,11 +170,13 @@ targetarch=''
 to=''
 usecrosscompile=''
 d_bsd=''
+d_dos=''
 d_eunice=''
 d_linux=''
+d_os2=''
 d_xenix=''
+_exe=''
 eunicefix=''
-Mcc=''
 ar=''
 awk=''
 bash=''
@@ -259,12 +261,18 @@ Revision=''
 Source=''
 State=''
 _a=''
-_exe=''
 _o=''
 archobjs=''
 firstmakefile=''
 afs=''
+afsroot=''
 baserev=''
+ccflags=''
+cppflags=''
+ldflags=''
+lkflags=''
+locincpth=''
+optimize=''
 cf_email=''
 cf_by=''
 cf_time=''
@@ -276,9 +284,16 @@ cpprun=''
 cppstdin=''
 d_portable=''
 defeditor=''
+gccosandvers=''
+gccversion=''
 install=''
 installdir=''
 issymlink=''
+glibpth=''
+libpth=''
+loclibpth=''
+plibpth=''
+xlibpth=''
 lns=''
 mailer=''
 make_set_make=''
@@ -286,7 +301,6 @@ installmansrc=''
 manext=''
 mansrc=''
 mansrcexp=''
-mkdep=''
 mydomain=''
 myhostname=''
 phostname=''
@@ -305,6 +319,7 @@ spackage=''
 pager=''
 patchlevel=''
 perlpath=''
+pkgsrc=''
 prefix=''
 prefixexp=''
 installprivlib=''
@@ -322,6 +337,9 @@ startperl=''
 startsh=''
 sysman=''
 trnl=''
+incpath=''
+mips_type=''
+usrinc=''
 CONFIG=''
 
 : Initialize wide constants
@@ -352,18 +370,42 @@ elif test -n "$DJGPP"; then
 elif test -d c:/. ; then
 	: OS/2 or cygwin
 	_exe=".exe"
+else
+	: All other UNIX systems
+	_exe=""
 fi
 
 ccname=''
 ccversion=''
-: No trailing extension on UNIX executables
-_exe='' 
 : Extra object files, if any, needed on this platform.
 archobjs=''
 bin='/usr/local/bin'
 cc='cc'
-cppflags=''
-usrinc='/usr/include'
+: Possible local include directories to search.
+: Set locincpth to "" in a hint file to defeat local include searches.
+locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
+locincpth="$locincpth /opt/gnu/include /usr/GNU/include /opt/GNU/include"
+:
+: no include file wanted by default
+inclwanted=''
+
+: change the next line if compiling for Xenix/286 on Xenix/386
+xlibpth='/usr/lib/386 /lib/386'
+: Possible local library directories to search.
+loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
+loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
+
+: general looking path for locating libraries
+glibpth="/lib /usr/lib $xlibpth"
+glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
+test -f /usr/shlib/libc.so && glibpth="/usr/shlib $glibpth"
+test -f /shlib/libc.so     && glibpth="/shlib $glibpth"
+
+: Private path used by Configure to find libraries.  Its value
+: is prepended to libpth. This variable takes care of special
+: machines, like the mips.  Usually, it should be empty.
+plibpth=''
+
 : Find the basic shell for Bourne shell scripts
 case "$sh" in
 '')
@@ -383,10 +425,13 @@ case "$sh" in
 		done
 		for xxx in $try; do
 			if test -f "$xxx"; then
-				sh="$xxx";
+				sh="$xxx"
+				break
+			elif test -f "$xxx$_exe"; then
+				sh="$xxx"
 				break
 			elif test -f "$xxx.exe"; then
-				sh="$xxx";
+				sh="$xxx"
 				break
 			fi
 		done
@@ -395,7 +440,7 @@ case "$sh" in
 esac
 
 case "$sh" in
-'')	cat <<EOM >&2
+'')	cat >&2 <<EOM
 $me:  Fatal Error:  I can't find a Bourne Shell anywhere.  
 
 Usually it's in /bin/sh.  How did you even get this far?
@@ -424,17 +469,17 @@ if `$sh -c '#' >/dev/null 2>&1`; then
 			exit 1
 		fi
 	fi
-	echo "#!$xcat" >try
-	$eunicefix try
-	chmod +x try
-	./try > today 2>/dev/null
+	echo "#!$xcat" >sharp
+	$eunicefix sharp
+	chmod +x sharp
+	./sharp > today 2>/dev/null
 	if test -s today; then
 		sharpbang='#!'
 	else
-		echo "#! $xcat" > try
-		$eunicefix try
-		chmod +x try
-		./try > today 2>/dev/null
+		echo "#! $xcat" > sharp
+		$eunicefix sharp
+		chmod +x sharp
+		./sharp > today 2>/dev/null
 		if test -s today; then
 			sharpbang='#! '
 		else
@@ -454,33 +499,33 @@ else
 	echo "I presume that if # doesn't work, #! won't work either!"
 	sharpbang=': use '
 fi
-rm -f try today
+rm -f sharp today
 
 : figure out how to guarantee sh startup
 case "$startsh" in
 '') startsh=${sharpbang}${sh} ;;
 *)
 esac
-cat >try <<EOSS
+cat >sharp <<EOSS
 $startsh
 set abc
 test "$?abc" != 1
 EOSS
 
-chmod +x try
-$eunicefix try
-if ./try; then
+chmod +x sharp
+$eunicefix sharp
+if ./sharp; then
 	: echo "Yup, it does."
 else
 	echo "Hmm... '$startsh' does not guarantee sh startup..."
 	echo "You may have to fix up the shell scripts to make sure $sh runs them."
 fi
-rm -f try
+rm -f sharp
 
 : Save command line options in file UU/cmdline.opt for later use in
 : generating config.sh.
 cat > cmdline.opt <<EOSH
-# Configure command line arguments.
+: Configure command line arguments.
 config_arg0='$0'
 config_args='$*'
 config_argc=$#
@@ -492,7 +537,6 @@ for arg in "$@"; do
 	cat >>cmdline.opt <<EOSH
 config_arg$argn='$arg'
 EOSH
-	# Extreme backslashitis: replace each ' by '"'"'
 	cat <<EOC | sed -e "s/'/'"'"'"'"'"'"'/g" > cmdl.opt
 $arg
 EOC
@@ -501,8 +545,6 @@ EOC
 	argn=`expr $argn + 1`
 	args_sep=' '
 done
-# args_exp is good for restarting self: eval "set X $args_exp"; shift; $0 "$@"
-# used by ./hints/os2.sh
 rm -f cmdl.opt
 
 : produce awk script to parse command line options
@@ -672,7 +714,7 @@ while test $# -gt 0; do
 	    esac
 	    shift
 	    ;;
-	-V) echo "$me generated by metaconfig 3.0 PL70." >&2
+	-V) echo "$me generated by metaconfig 3.5 PL0." >&2
 	    exit 0;;
 	--) break;;
 	-*) echo "$me: unknown option $1" >&2; shift; error=true;;
@@ -745,7 +787,7 @@ touch optdef.sh
 touch posthint.sh
 
 : set package name
-package=dist
+package='dist'
 first=`echo $package | sed -e 's/^\(.\).*/\1/'`
 last=`echo $package | sed -e 's/^.\(.*\)/\1/'`
 case "`echo AbyZ | tr '[:lower:]' '[:upper:]' 2>/dev/null`" in
@@ -753,6 +795,29 @@ ABYZ) spackage=`echo $first | tr '[:lower:]' '[:upper:]'`$last;;
 *) spackage=`echo $first | tr '[a-z]' '[A-Z]'`$last;;
 esac
 
+: script used to emulate mkdir -p
+cat >mkdirp <<EOS
+$startsh
+EOS
+cat >>mkdirp <<'EOS'
+name=$1;
+create="";
+while test $name; do
+	if test ! -d "$name"; then
+		create="$name $create"
+		name=`echo $name | sed -e "s|^[^/]*$||"`
+		name=`echo $name | sed -e "s|\(.*\)/.*|\1|"`
+	else
+		name=""
+	fi
+done
+for file in $create; do
+	mkdir $file
+done
+EOS
+chmod +x mkdirp
+$eunicefix mkdirp
+
 : Some greps do not return status, grrr.
 echo "grimblepritz" >grimble
 if grep blurfldyick grimble >/dev/null 2>&1 ; then
@@ -777,19 +842,21 @@ esac
 : Find the path to the source tree
 case "$src" in
 '') case "$0" in
-    */*) src=`echo $0 | sed -e 's%/[^/][^/]*$%%'`;;
-    *)   src='.';;
+    */*)
+		src=`echo $0 | sed -e 's%/[^/][^/]*$%%'`
+		;;
+    *)	src='.';;
     esac;;
 esac
 case "$src" in
 '')	src=/
 	rsrc=/
 	;;
-/*) rsrc="$src";;
-*) rsrc="../$src";;
+/*)	rsrc="$src";;
+*)	rsrc="../$src";;
 esac
 if test -f $rsrc/Configure && \
-	$contains "^package=$package$" $rsrc/Configure >/dev/null 2>&1
+	$contains "^package='$package'\$" $rsrc/Configure >/dev/null 2>&1
 then
    : found it, so we are ok.
 else
@@ -840,22 +907,6 @@ esac
 if test ! -f "$SRC/$1"; then
 	shift
 fi
-mkdir_p='
-name=$1;
-create="";
-while test $name; do
-	if test ! -d "$name"; then
-		create="$name $create";
-		name=`echo $name | sed -e "s|^[^/]*$||"`;
-		name=`echo $name | sed -e "s|\(.*\)/.*|\1|"`;
-	else
-		name="";
-	fi;
-done;
-for file in $create; do
-	mkdir $file;
-done
-'
 for file in $*; do
 	case "$SRC" in
 	".")
@@ -875,7 +926,7 @@ for file in $*; do
 		*/*)
 			dir=`expr X$file : 'X\(.*\)/'`
 			file=`expr X$file : 'X.*/\(.*\)'`
-			(set x $dir; shift; eval $mkdir_p)
+			./mkdirp $dir
 			sh <"$SRC/$dir/$file"
 			;;
 		*)
@@ -887,8 +938,7 @@ for file in $*; do
 done
 if test -f "$SRC/config_h.SH"; then
 	if test ! -f config.h; then
-	: oops, they left it out of MANIFEST, probably, so do it anyway.
-	. "$SRC/config_h.SH"
+		sh <"$SRC/config_h.SH"
 	fi
 fi
 EOS
@@ -1185,7 +1235,7 @@ If you are in a hurry, you may run 'Configure -d'.  This will bypass nearly all
 the questions and use the computed defaults (or the previous answers if there
 was already a config.sh file). Type 'Configure -h' for a list of options.
 You may also start interactively and then answer '& -d' at any prompt to turn
-on the non-interactive behaviour for the remaining of the execution.
+on the non-interactive behaviour for the remainder of the execution.
 
 EOH
 	. ./myread
@@ -1224,7 +1274,6 @@ if test \$# -gt 0; then
 else
 	cat >msg
 fi
-echo " "
 echo "*** WARNING:" >&4
 sed -e 's/^/*** /' <msg >&4
 echo "*** " >&4
@@ -1302,6 +1351,7 @@ tr
 uniq
 "
 trylist="
+Mcc
 cpp
 date
 inews
@@ -1476,6 +1526,8 @@ case "$cc" in
 *)  $rm -f try try.*
     $cat >try.c <<EOM
 int main(int argc, char *argv[]) {
+  (void) argc;
+  (void) argv;
   return 0;
 }
 EOM
@@ -1509,13 +1561,11 @@ EOM
                 fi  
                 case "$ans" in
                 [yY]*) cc=gcc; ccname=gcc; ccflags=''; despair=no;
-                       if $test -f usethreads.cbu; then
-                           $cat >&4 <<EOM 
-
-*** However, any setting of the C compiler flags (e.g. for thread support)
-*** has been lost.  It may be necessary to pass -Dcc=gcc to Configure
-*** (together with any other cc-dependent option).
-
+                       $cat *.cbu >checktmp 2>/dev/null
+                       if $contains ccflags checktmp >/dev/null; then
+                           ./warn <<EOM 
+Any previous setting of the C compiler flags has been lost.
+It may be necessary to pass -Dcc=gcc to Configure right away.
 EOM
                        fi;;
                 esac
@@ -1537,6 +1587,8 @@ case "$cc" in
 *)  $rm -f try try.*              
     $cat >try.c <<EOM
 int main(int argc, char *argv[]) {
+  (void) argc;
+  (void) argv;
   return 0;
 }
 EOM
@@ -1562,7 +1614,8 @@ EOSC
 : determine whether symbolic links are supported
 echo " "
 $touch blurfl
-if $ln -s blurfl sym > /dev/null 2>&1 ; then
+$rm -f sym
+if $ln -s blurfl sym > /dev/null 2>&1 && $test -f sym; then
 	echo "Symbolic links are supported." >&4
 	lns="$ln -s"
 else
@@ -1628,9 +1681,16 @@ case "$lns" in
 	;;
 esac
 
+: define absolute package source directory
+case "$src" in
+/*) pkgsrc=$src;;
+*) pkgsrc=`cd $rsrc; pwd`;;
+esac
+
 : Duplicate the tree with symbolic links if -Dmksymlinks was supplied
 case "$mksymlinks" in
 $define|true|[yY]*)
+	echo " "
 	case "$src" in
 	''|'.')	echo "Cannot create symlinks in the original directory." >&4
 		exit 1
@@ -1643,16 +1703,17 @@ $define|true|[yY]*)
 			awk '{print $1}' $src/MANIFEST | grep / | sed 's:/[^/]*$::' | \
 				sort -u | while true
 			do
-				read directory
-				test -z "$directory" && break
-				if mkdir -p $directory 2>/dev/null && test -d $directory; then
+				read dir
+				test -z "$dir" && break
+				./UU/mkdirp $dir 2>/dev/null
+				if test -d $dir; then
 					: ok
 				else
-					echo "Failed to create '$directory'.  Aborting." >&4
+					echo "Failed to create '$dir'.  Aborting." >&4
 					exit 1
 				fi
 			done
-			echo "(Then creating the symlinks...)" >&4
+			echo "(Now creating the symlinks...)" >&4
 			awk '{print $1}' $src/MANIFEST | while true; do
 				read filename
 				test -z "$filename" && break
@@ -1664,7 +1725,7 @@ $define|true|[yY]*)
 				if test -f $filename; then
 					echo "$filename already exists, not symlinking."
 				else
-					ln -s $src/$filename $filename
+					ln -s $pkgsrc/$filename $filename
 				fi
 			done
 			echo "(Checking current directory...)" >&4
@@ -1678,7 +1739,6 @@ $define|true|[yY]*)
 					>/dev/null 2>>"$tmppwd/missing")
 			done
 			if test -s missing; then
-				cat missing >&4
 				echo "Failed duplication of source tree.  Aborting." >&4
 				exit 1
 			fi
@@ -1691,22 +1751,9 @@ $define|true|[yY]*)
 	;;
 esac
 
-: setup for possible cross-compilation
-run=''
-to=:
-from=:
-usecrosscompile='undef'
-targetarch=''
-case "$usecrosscompile" in
-$define|true|[yY]*)
-	echo "Cross-compilation is not supported for this package." >&4
-	exit 1
-	;;
-esac
-
 : see whether [:lower:] and [:upper:] are supported character classes
 echo " "
-case "`echo AbyZ | $tr '[:lower:]' '[:upper:]' 2>/dev/null`" in
+case "`echo AbyZ | LC_ALL=C $tr '[:lower:]' '[:upper:]' 2>/dev/null`" in
 ABYZ)
 	echo "Good, your tr supports [:lower:] and [:upper:] to convert case." >&4
 	up='[:upper:]'
@@ -1715,14 +1762,14 @@ ABYZ)
 *)	# There is a discontinuity in EBCDIC between 'I' and 'J'
         # (0xc9 and 0xd1), therefore that is a nice testing point.
         if test "X$up" = X -o "X$low" = X; then
-	    case "`echo IJ | $tr '[I-J]' '[i-j]' 2>/dev/null`" in
+	    case "`echo IJ | LC_ALL=C $tr '[I-J]' '[i-j]' 2>/dev/null`" in
 	    ij) up='[A-Z]'
 	        low='[a-z]'
 		;;
 	    esac
         fi
 	if test "X$up" = X -o "X$low" = X; then
-	    case "`echo IJ | $tr I-J i-j 2>/dev/null`" in
+	    case "`echo IJ | LC_ALL=C $tr I-J i-j 2>/dev/null`" in
 	    ij) up='A-Z'
 		low='a-z'
 		;;
@@ -1733,14 +1780,15 @@ ABYZ)
 	    *C9D1*|*c9d1*)
 		echo "Hey, this might be EBCDIC." >&4
 		if test "X$up" = X -o "X$low" = X; then
-		    case "`echo IJ | $tr '[A-IJ-RS-Z]' '[a-ij-rs-z]' 2>/dev/null`" in
+		    case "`echo IJ | \
+				LC_ALL=C $tr '[A-IJ-RS-Z]' '[a-ij-rs-z]' 2>/dev/null`" in
 		    ij) up='[A-IJ-RS-Z]'
 		        low='[a-ij-rs-z]'
 			;;
 		    esac
 		fi
 		if test "X$up" = X -o "X$low" = X; then
-		    case "`echo IJ | $tr A-IJ-RS-Z a-ij-rs-z 2>/dev/null`" in
+		    case "`echo IJ | LC_ALL=C $tr A-IJ-RS-Z a-ij-rs-z 2>/dev/null`" in
 		    ij) up='A-IJ-RS-Z'
 		        low='a-ij-rs-z'
 			;;
@@ -1750,7 +1798,7 @@ ABYZ)
 	    esac
 	fi
 esac
-case "`echo IJ | $tr \"$up\" \"$low\" 2>/dev/null`" in
+case "`echo IJ | LC_ALL=C $tr \"$up\" \"$low\" 2>/dev/null`" in
 ij)
     echo "Using $up and $low to convert case." >&4
     ;;
@@ -1764,28 +1812,309 @@ esac
 cat >tr <<EOSC
 $startsh
 case "\$1\$2" in
-'[A-Z][a-z]') exec $tr '$up' '$low';;
-'[a-z][A-Z]') exec $tr '$low' '$up';;
+'[A-Z][a-z]') LC_ALL=C exec $tr '$up' '$low';;
+'[a-z][A-Z]') LC_ALL=C exec $tr '$low' '$up';;
 esac
-exec $tr "\$@"
+LC_ALL=C exec $tr "\$@"
 EOSC
 chmod +x tr
 $eunicefix tr
 
-: Try to determine whether config.sh was made on this system
-case "$config_sh" in
-'')
+: setup for possible cross-compilation
+run=''
+to=:
+from=:
+usecrosscompile='undef'
+targetarch=''
+case "$usecrosscompile" in
+$define|true|[yY]*)
+	echo "Cross-compilation is not supported for this package." >&4
+	exit 1
+	;;
+esac
+
+: Determine the name of the machine
 myuname=`$uname -a 2>/dev/null`
 $test -z "$myuname" && myuname=`hostname 2>/dev/null`
 myuname=`echo $myuname | $sed -e 's/^[^=]*=//' -e 's/\///g' | \
 	./tr '[A-Z]' '[a-z]' | $tr $trnl ' '`
 newmyuname="$myuname"
+$test -f "$uname$_exe" && has_uname=y
+
+: Guessing of the OS name -- half the following guesses are probably wrong...
+: If you have better tests or hints, please send them to the metaconfig
+: authors and to Raphael_Manfredi@grenoble.hp.com
+$test -f /irix && osname=irix
+$test -f /xenix && osname=sco_xenix
+$test -f /dynix && osname=dynix
+$test -f /dnix && osname=dnix
+$test -f /lynx.os && osname=lynxos
+$test -f /unicos && osname=unicos && osvers=`$uname -r`
+$test -f /unicosmk && osname=unicosmk && osvers=`$uname -r`
+$test -f /unicosmk.ar && osname=unicosmk && osvers=`$uname -r`
+$test -f /bin/mips && /bin/mips && osname=mips
+$test -d /NextApps && set X `hostinfo | $grep 'NeXT Mach.*:' | \
+	$sed -e 's/://' -e 's/\./_/'` && osname=next && osvers=$4
+$test -d /usr/apollo/bin && osname=apollo
+$test -f /etc/saf/_sactab && osname=svr4
+$test -d /usr/include/minix && osname=minix
+$test -f /system/gnu_library/bin/ar.pm && osname=vos
+if $test -d /MachTen -o -d /MachTen_Folder; then
+	osname=machten
+	if $test -x /sbin/version; then
+		osvers=`/sbin/version | $awk '{print $2}' |
+		$sed -e 's/[A-Za-z]$//'`
+	elif $test -x /usr/etc/version; then
+		osvers=`/usr/etc/version | $awk '{print $2}' |
+		$sed -e 's/[A-Za-z]$//'`
+	else
+		osvers="$2.$3"
+	fi
+fi
+$test -f /sys/posix.dll &&
+	$test -f /usr/bin/what &&
+	set X `/usr/bin/what /sys/posix.dll` &&
+	$test "$3" = UWIN &&
+	osname=uwin &&
+	osvers="$5"
+if $test "X$has_uname" != X; then
+	set X $myuname
+	shift
+	case "$5" in
+	fps*) osname=fps ;;
+	mips*)
+		case "$4" in
+		umips) osname=umips ;;
+		*) osname=mips ;;
+		esac;;
+	[23]100) osname=mips ;;
+	next*) osname=next ;;
+	i386*)
+		tmp=`/bin/uname -X 2>/dev/null|awk '/3\.2v[45]/{ print $(NF) }'`
+		if $test "$tmp" != "" -a "$3" = "3.2" -a -f '/etc/systemid'; then
+			osname='sco'
+			osvers=$tmp
+		elif $test -f /etc/kconfig; then
+			osname=isc
+			if $test "$lns" = "$ln -s"; then
+				osvers=4
+			elif $contains _SYSV3 /usr/include/stdio.h > /dev/null 2>&1 ; then
+				osvers=3
+			elif $contains _POSIX_SOURCE /usr/include/stdio.h > /dev/null 2>&1 ; then
+				osvers=2
+			fi
+		fi
+		tmp=''
+		;;
+	pc*)
+		if $test -n "$DJGPP"; then
+			osname=dos
+			osvers=djgpp
+		fi
+		;;
+	esac
+	case "$1" in
+	aix) osname=aix
+		tmp=`( (oslevel) 2>/dev/null || echo "not found") 2>&1`
+		case "$tmp" in
+		'not found') osvers="$4"."$3" ;;
+		'<3240'|'<>3240') osvers=3.2.0 ;;
+		'=3240'|'>3240'|'<3250'|'<>3250') osvers=3.2.4 ;;
+		'=3250'|'>3250') osvers=3.2.5 ;;
+		*) osvers=$tmp;;
+		esac
+		;;
+	bsd386) osname=bsd386
+		osvers=`$uname -r`
+		;;
+	cygwin*) osname=cygwin
+		osvers="$3"
+		;;
+	*dc.osx) osname=dcosx
+		osvers="$3"
+		;;
+	dnix) osname=dnix
+		osvers="$3"
+		;;
+	domainos) osname=apollo
+		osvers="$3"
+		;;
+	dgux) osname=dgux 
+		osvers="$3"
+		;;
+	dynixptx*) osname=dynixptx
+		osvers=`echo "$4"|sed 's/^v//'`
+		;;
+	freebsd) osname=freebsd 
+		osvers="$3" ;;
+	genix) osname=genix ;;
+	hp*) osname=hpux 
+		osvers=`echo "$3" | $sed 's,.*\.\([0-9]*\.[0-9]*\),\1,'`
+		;;
+	irix*) osname=irix
+		case "$3" in
+		4*) osvers=4 ;;
+		5*) osvers=5 ;;
+		*)	osvers="$3" ;;
+		esac
+		;;
+	linux) osname=linux
+		case "$3" in
+		*)	osvers="$3" ;;
+		esac
+		;;
+	MiNT) osname=mint
+		;;
+	netbsd*) osname=netbsd
+		osvers="$3"
+		;;
+	news-os) osvers="$3"
+		case "$3" in
+		4*) osname=newsos4 ;;
+		*) osname=newsos ;;
+		esac
+		;;
+	next*) osname=next ;;
+	nonstop-ux) osname=nonstopux ;;
+	openbsd) osname=openbsd
+				osvers="$3"
+				;;
+	POSIX-BC | posix-bc ) osname=posix-bc
+		osvers="$3"
+		;;
+	powerux | power_ux | powermax_os | powermaxos | \
+	powerunix | power_unix) osname=powerux
+		osvers="$3"
+		;;
+	qnx) osname=qnx
+		osvers="$4"
+		;;
+	solaris) osname=solaris
+		case "$3" in
+		5*) osvers=`echo $3 | $sed 's/^5/2/g'` ;;
+		*)	osvers="$3" ;;
+		esac
+		;;
+	sunos) osname=sunos
+		case "$3" in
+		5*) osname=solaris
+			osvers=`echo $3 | $sed 's/^5/2/g'` ;;
+		*)	osvers="$3" ;;
+		esac
+		;;
+	titanos) osname=titanos
+		case "$3" in
+		1*) osvers=1 ;;
+		2*) osvers=2 ;;
+		3*) osvers=3 ;;
+		4*) osvers=4 ;;
+		*)	osvers="$3" ;;
+		esac
+		;;
+	ultrix) osname=ultrix
+		osvers="$3"
+		;;
+	osf1|mls+)	case "$5" in
+		alpha)
+			osname=dec_osf
+			osvers=`sizer -v | awk '{print $3}' | \
+				./tr '[A-Z]' '[a-z]' | sed 's/^[xvt]//'`
+			case "$osvers" in
+			[1-9].[0-9]*) ;;
+			*) osvers=`echo "$3" | sed 's/^[xvt]//'` ;;
+			esac
+			;;
+		hp*)	osname=hp_osf1	;;
+		mips)	osname=mips_osf1 ;;
+		esac
+		;;
+	unixware) osname=svr5
+		osvers="$4"
+		;;
+	uts)	osname=uts
+		osvers="$3"
+		;;
+	vos) osvers="$3"
+		;;
+	$2) case "$osname" in
+		*isc*) ;;
+		*freebsd*) ;;
+		svr*)
+			: svr4.x or possibly later
+			case "svr$3" in	
+			${osname}*)
+				osname=svr$3
+				osvers=$4
+				;;
+			esac
+			case "$osname" in
+			svr4.0)
+				: Check for ESIX
+				if $test -f /stand/boot ; then
+					eval `$grep '^INITPROG=[a-z/0-9]*$' /stand/boot`
+					if $test -n "$INITPROG" -a -f "$INITPROG"; then
+						isesix=`strings -a $INITPROG | \
+							$grep 'ESIX SYSTEM V/386 Release 4.0'`
+						if $test -n "$isesix"; then
+							osname=esix4
+						fi
+					fi
+				fi
+				;;
+			esac
+			;;
+		*)	if $test -f /etc/systemid; then
+				osname=sco
+				set `echo $3 | $sed 's/\./ /g'` $4
+				if $test -f $src/hints/sco_$1_$2_$3.sh; then
+					osvers=$1.$2.$3
+				elif $test -f $src/hints/sco_$1_$2.sh; then
+					osvers=$1.$2
+				elif $test -f $src/hints/sco_$1.sh; then
+					osvers=$1
+				fi
+			else
+				case "$osname" in
+				'') : Still unknown.  Probably a generic Sys V.
+					osname="sysv"
+					osvers="$3"
+					;;
+				esac
+			fi
+			;;
+		esac
+		;;
+	*)	case "$osname" in
+		'') : Still unknown.  Probably a generic BSD.
+			osname="$1"
+			osvers="$3"
+			;;
+		esac
+		;;
+	esac
+else
+	if $test -f /vmunix -a -f $src/hints/news_os.sh; then
+		(what /vmunix | UU/tr '[A-Z]' '[a-z]') > UU/kernel.what 2>&1
+		if $contains news-os UU/kernel.what >/dev/null 2>&1; then
+			osname=news_os
+		fi
+		$rm -f UU/kernel.what
+	elif $test -d c:/.; then
+		set X $myuname
+		osname=os2
+		osvers="$5"
+	fi
+fi
+
+: Try to determine whether config.sh was made on this system
+case "$config_sh" in
+'')
 dflt=n
 case "$knowitall" in
 '')
 	if test -f ../config.sh; then
 		if $contains myuname= ../config.sh >/dev/null 2>&1; then
-			eval "`grep myuname= ../config.sh`"
+			eval "`$grep myuname= ../config.sh`"
 		fi
 		if test "X$myuname" = "X$newmyuname"; then
 			dflt=y
@@ -1795,18 +2124,21 @@ case "$knowitall" in
 *) dflt=y;;
 esac
 
-: Get old answers, if there is a config file out there
+: Get old answers from config file if it was generated on the same system
 hint=default
-hintfile=''
-if test -f ../config.sh; then
+if $test -f ../config.sh; then
 	echo " "
 	rp="I see a config.sh file.  Shall I use it to set the defaults?"
 	. ./myread
 	case "$ans" in
-	n*|N*) echo "OK, I'll ignore it.";;
+	n*|N*) echo "OK, I'll ignore it."
+		mv ../config.sh ../config.sh.old
+		myuname="$newmyuname"
+		;;
 	*)  echo "Fetching default answers from your old config.sh file..." >&4
 		tmp_n="$n"
 		tmp_c="$c"
+		tmp_sh="$sh"
 		. ../config.sh
 		cp ../config.sh .
 		n="$tmp_n"
@@ -1821,6 +2153,7 @@ fi
 	echo "Fetching default answers from $config_sh..." >&4
 	tmp_n="$n"
 	tmp_c="$c"
+	tmp_sh="$sh"
 	cd ..
 	cp $config_sh config.sh 2>/dev/null
 	chmod +w config.sh
@@ -1832,19 +2165,76 @@ fi
 	hint=previous
 	;;
 esac
-test "$override" && . ./optdef.sh
+case "$sh" in
+'') sh="$tmp_sh" ;;
+esac
+$test "$override" && . ./optdef.sh
 
 : Restore computed paths
 for file in $loclist $trylist; do
 	eval $file="\$_$file"
 done
 
-: process their -A options
+. ./checkcc
+case "$targetarch" in
+'') ;;
+*)  hostarch=$osname
+	osname=`echo $targetarch|sed 's,^[^-]*-,,'`
+	osvers=''
+	;;
+esac
+
+: Process their -A options
 . ./posthint.sh
 
+: Ask them to confirm the OS name
+cat << EOM
+
+Configure uses the operating system name and version to set some defaults.
+The default value is probably right if the name rings a bell. Otherwise,
+since spelling matters for me, either accept the default or answer "none"
+to leave it blank.
+
+EOM
+case "$osname" in
+	''|' ')
+		case "$hintfile" in
+		''|' '|none) dflt=none ;;
+		*)  dflt=`echo $hintfile | $sed -e 's/\.sh$//' -e 's/_.*$//'` ;;
+		esac
+		;;
+	*) dflt="$osname" ;;
+esac
+rp="Operating system name?"
+. ./myread
+case "$ans" in
+none)  osname='' ;;
+*) osname=`echo "$ans" | $sed -e 's/[ 	][	]*/_/g' | ./tr '[A-Z]' '[a-z]'`;;
+esac
+echo " "
+case "$osvers" in
+	''|' ')
+		case "$hintfile" in
+		''|' '|none) dflt=none ;;
+		*)	dflt=`echo $hintfile | $sed -e 's/\.sh$//' -e 's/^[^_]*//'`
+			dflt=`echo $dflt | $sed -e 's/^_//' -e 's/_/./g'`
+			case "$dflt" in
+			''|' ') dflt=none ;;
+			esac
+			;;
+		esac
+		;;
+	*) dflt="$osvers" ;;
+esac
+rp="Operating system version?"
+. ./myread
+case "$ans" in
+none)  osvers='' ;;
+*) osvers="$ans" ;;
+esac
+
 : who configured the system
-LC_ALL=C; export LC_ALL
-cf_time=`$date 2>&1`
+cf_time=`LC_ALL=C; LANGUAGE=C; export LC_ALL; export LANGUAGE; $date 2>&1`
 cf_by=`(logname) 2>/dev/null`
 case "$cf_by" in
 "")
@@ -1854,12 +2244,18 @@ case "$cf_by" in
 	esac ;;
 esac
 
+: allow them to override the AFS root
+case "$afsroot" in
+'')	afsroot=/afs ;;
+*)	afsroot=$afsroot ;;
+esac
+
 : is AFS running?
 echo " "
 case "$afs" in
 $define|true)	afs=true ;;
 $undef|false)	afs=false ;;
-*)	if test -d /afs; then
+*)	if $test -d $afsroot; then
 		afs=true
 	else
 		afs=false
@@ -1876,7 +2272,8 @@ fi
 echo " "
 case "$sysman" in
 '') 
-	syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
+	syspath='/usr/share/man/man1 /usr/man/man1'
+	syspath="$syspath /usr/man/mann /usr/man/manl /usr/man/local/man1"
 	syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
 	syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
 	syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
@@ -1969,10 +2366,15 @@ exp_file=''
 nopath_ok=''
 orig_rp="$rp"
 orig_dflt="$dflt"
+case "$gfpth" in
+'') gfpth='.' ;;
+esac
 
 case "$fn" in
 *\(*)
-	expr $fn : '.*(\(.*\)).*' | tr ',' '\012' >getfile.ok
+	: getfile will accept an answer from the comma-separated list
+	: enclosed in parentheses even if it does not meet other criteria.
+	expr "$fn" : '.*(\(.*\)).*' | $tr ',' $trnl >getfile.ok
 	fn=`echo $fn | sed 's/(.*)//'`
 	;;
 esac
@@ -2071,6 +2473,7 @@ while test "$type"; do
 		true)
 			case "$ansexp" in
 			/*) value="$ansexp" ;;
+			[a-zA-Z]:/*) value="$ansexp" ;;
 			*)
 				redo=true
 				case "$already" in
@@ -2095,18 +2498,40 @@ while test "$type"; do
 		'')
 			case "$type" in
 			File)
-				if test -f "$ansexp"; then
-					type=''
-				elif test -r "$ansexp" || (test -h "$ansexp") >/dev/null 2>&1
-				then
-					echo "($value is not a plain file, but that's ok.)"
-					type=''
-				fi
+				for fp in $gfpth; do
+					if test "X$fp" = X.; then
+					    pf="$ansexp"
+					else    
+					    pf="$fp/$ansexp"
+					fi
+					if test -f "$pf"; then
+						type=''
+					elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
+					then
+						echo "($value is not a plain file, but that's ok.)"
+						type=''
+					fi
+					if test X"$type" = X; then
+					    value="$pf"
+					    break
+					fi
+				done
 				;;
 			Directory)
-				if test -d "$ansexp"; then
-					type=''
-				fi
+				for fp in $gfpth; do
+					if test "X$fp" = X.; then
+					    dir="$ans"
+					    direxp="$ansexp"
+					else    
+					    dir="$fp/$ansexp"
+					    direxp="$fp/$ansexp"
+					fi
+					if test -d "$direxp"; then
+						type=''
+						value="$dir"
+						break
+					fi
+				done
 				;;
 			Locate)
 				if test -d "$ansexp"; then
@@ -2160,6 +2585,7 @@ ans="$value"
 rp="$orig_rp"
 dflt="$orig_dflt"
 rm -f getfile.ok
+test "X$gfpthkeep" != Xy && gfpth=""
 EOSC
 
 : determine root of directory hierarchy where package will be installed.
@@ -2406,7 +2832,6 @@ fi
 : preserve RCS keywords in files with variable substitution, grrr
 Header='$Header'
 Id='$Id'
-Locker='$Locker'
 Log='$Log'
 
 : Define several unixisms.
@@ -2434,8 +2859,11 @@ echo exit 1 >venix
 echo exit 1 >os2
 echo exit 1 >gnu
 echo exit 1 >linux
+echo exit 1 >dos
 d_bsd="$undef"
 d_linux="$undef"
+d_dos="$undef"
+d_os2="$undef"
 $cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
 if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
 then
@@ -2495,9 +2923,21 @@ case "$p_" in
 *)
 	$cat <<'EOI'
 I have the feeling something is not exactly right, however...don't tell me...
+EOI
+	if test -n "$DJGPP"; then
+		case "X${MACHTYPE:-nonesuchmach}" in
+		cygwin) echo "hah!... you're running under Cygwin!";;
+		*) echo "got it... you're running DOS with DJGPP!";;
+		esac
+		echo exit 0 >dos
+		d_dos="$define"
+	else
+		$cat <<'EOI'
 lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
 EOI
-	echo exit 0 >os2
+		echo exit 0 >os2
+		d_os2="$define"
+	fi
 	;;
 esac
 if test -f /xenix; then
@@ -2522,12 +2962,58 @@ else
 		echo "Nor is it Venix..."
 	fi
 fi
-chmod +x bsd usg v7 osf1 eunice xenix venix os2 gnu linux
-$eunicefix bsd usg v7 osf1 eunice xenix venix os2 gnu linux
+chmod +x bsd usg v7 osf1 eunice xenix venix dos os2 gnu linux
+$eunicefix bsd usg v7 osf1 eunice xenix venix dos os2 gnu linux
 $rm -f foo
 
+: What should the include directory be ?
+echo " "
+$echo $n "Hmm...  $c"
+dflt='/usr/include'
+incpath=''
+mips_type=''
+if $test -f /bin/mips && /bin/mips; then
+	echo "Looks like a MIPS system..."
+	$cat >usr.c <<'EOCP'
+#ifdef SYSTYPE_BSD43
+/bsd43
+#endif
+EOCP
+	if cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
+		dflt='/bsd43/usr/include'
+		incpath='/bsd43'
+		mips_type='BSD 4.3'
+	else
+		mips_type='System V'
+	fi
+	$rm -f usr.c usr.out
+	echo "and you're compiling with the $mips_type compiler and libraries."
+	xxx_prompt=y
+	echo "exit 0" >mips
+else
+	echo "Doesn't look like a MIPS system."
+	xxx_prompt=n
+	echo "exit 1" >mips
+fi
+chmod +x mips
+$eunicefix mips
+case "$usrinc" in
+'') ;;
+*) dflt="$usrinc";;
+esac
+case "$xxx_prompt" in
+y)	fn=d/
+	echo " "
+	rp='Where are the include files you want to use?'
+	. ./getfile
+	usrinc="$ans"
+	;;
+*)	usrinc="$dflt"
+	;;
+esac
+
 : see if we have to deal with yellow pages, now NIS.
-if $test -d /usr/etc/yp || $test -d /etc/yp; then
+if $test -d /usr/etc/yp || $test -d /etc/yp || $test -d /usr/lib/yp; then
 	if $test -f /usr/etc/nibindd; then
 		echo " "
 		echo "I'm fairly confident you're on a NeXT."
@@ -2571,13 +3057,16 @@ if $test -d /usr/etc/yp || $test -d /etc/yp; then
 	esac
 fi
 case "$hostcat" in
-'') hostcat='cat /etc/hosts';;
+'') hostcat=':'
+	$test -f /etc/hosts && hostcat='cat /etc/hosts';;
 esac
 case "$groupcat" in
-'') groupcat='cat /etc/group';;
+'')	groupcat=':'
+	$test -f /etc/group && groupcat='cat /etc/group';;
 esac
 case "$passcat" in
-'') passcat='cat /etc/passwd';;
+'') passcat=':'
+	$test -f /etc/passwd && passcat='cat /etc/passwd';;
 esac
 
 : now get the host name
@@ -2634,6 +3123,9 @@ if $test "$cont"; then
 		fi
 	fi
 fi
+case "$myhostname" in
+'') myhostname=noname ;;
+esac
 : you do not want to know about this
 set $myhostname
 myhostname=$1
@@ -2685,14 +3177,20 @@ case "$myhostname" in
 		tmp_re="[	. ]"
 		$test x`$awk "/[0-9].*[	 ]$myhostname$tmp_re/ { sum++ }
 			     END { print sum }" hosts` = x1 || tmp_re="[	 ]"
-		dflt=.`$awk "/[0-9].*[	 ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
+		dflt=.`$awk \
+		"/[0-9].*[	 ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
 			hosts | $sort | $uniq | \
 			$sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
 		case `$echo X$dflt` in
 		X*\ *)	echo "(Several hosts in /etc/hosts matched hostname)"
 			dflt=.
 			;;
-		X.) echo "(You do not have fully-qualified names in /etc/hosts)"
+		X.)
+			if $test -f /etc/hosts; then
+				echo "(You do not have fully-qualified names in /etc/hosts)"
+			else
+				echo "(I cannot locate a hosts database anywhere)"
+			fi
 			;;
 		esac
 		case "$dflt" in
@@ -2721,9 +3219,16 @@ case "$myhostname" in
 			esac
 			;;
 		esac
+		case "$dflt$osname" in
+		.os390)
+			file="//'SYS1.TCPPARMS(TCPDATA)'"
+			echo "(Attempting domain name extraction from $file)"
+			dflt=.`awk '/^DOMAINORIGIN/ {print $2}' "$file" 2>/dev/null`
+			;;
+			esac
 		case "$dflt" in
 		.) echo "(Lost all hope -- silly guess then)"
-			dflt='.uucp'
+			dflt='.nonet'
 			;;
 		esac
 		$rm -f hosts
@@ -2776,7 +3281,7 @@ $cat <<EOM
 I need to get your e-mail address in Internet format if possible, i.e.
 something like user@host.domain. Please answer accurately since I have
 no easy means to double check it. The default value provided below
-is most probably close to the reality but may not be valid from outside
+is most probably close to reality but may not be valid from outside
 your organization...
 
 EOM
@@ -2827,178 +3332,94 @@ else
 fi
 $rm -f foo.c foo.cpp
 
-: determine default editor
+: Check whether they have gcc in any guise.  
 echo " "
-case "$defeditor" in
-'')
-	case "$vi" in
-	*/*) dflt="$vi";;
-	*) dflt=/usr/ucb/vi;;
+echo "Checking for GNU cc in disguise and/or its version number..." >&4
+$cat >try.c <<EOM
+#include <stdio.h>
+int main() {
+#ifdef __GNUC__
+#ifdef __VERSION__
+	printf("%s\n", __VERSION__);
+#else
+	printf("%s\n", "1");
+#endif
+#endif
+	exit(0);
+}
+EOM
+if $cc -o try $ccflags $ldflags try.c >/dev/null 2>&1; then
+	gccversion=`$run ./try`
+	case "$gccversion" in
+	'') echo "You are not using GNU cc." ;;
+	*)  echo "You are using GNU cc $gccversion."
+	    ccname=gcc	
+	    ;;
 	esac
-	;;
-*)  dflt="$defeditor"
-	;;
+else
+	echo " "
+	echo "*** WHOA THERE!!! ***" >&4
+	echo "    Your C compiler \"$cc\" doesn't seem to be working!" >&4
+	case "$knowitall" in
+	'')
+	echo "    You'd better start hunting for one and let me know about it." >&4
+		exit 1
+		;;
+	esac
+fi
+$rm -f try try.*
+case "$gccversion" in
+1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
 esac
-fn=f/
-rp="What is the default editor on your system?"
-. ./getfile
-defeditor="$ans"
+case "$gccversion" in
+'') gccosandvers='' ;;
+*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
+   gccosandvers=`$cc -v 2>&1 | \
+	$grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
+   gccshortvers=''
+   case "$gccosandvers" in
+   $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
+   $osname$osvers) ;; # looking good
+   $osname*) cat <<EOM >&4
+
+*** WHOA THERE!!! ***
+
+    Your gcc has not been compiled for the exact release of
+    your operating system ($gccosandvers versus $osname$osvers).
+
+    In general it is a good idea to keep gcc synchronized with
+    the operating system because otherwise serious problems
+    may ensue when trying to compile software, like Perl.
+
+    I'm trying to be optimistic here, though, and will continue.
+    If later during the configuration and build icky compilation
+    problems appear (headerfile conflicts being the most common
+    manifestation), I suggest reinstalling the gcc to match
+    your operating system release.
 
-: locate a BSD compatible install program
-echo " "
-echo "Looking for a BSD-compatible install program..." >&4
-creatdir=''
-case "$install" in
-'')
-	tryit=''
-	for dir in $pth; do
-		for file in ginstall installbsd scoinst install; do
-			if $test -f $dir/$file; then
-				tryit="$tryit $dir/$file"
-			fi
-		done
-	done
-	$cat >try.c <<EOC
-int main()
-{
-	printf("OK\n");
-	exit(0);
-}
-EOC
-	if $cc -o try try.c >/dev/null 2>&1; then
-		cp try try.ns
-		strip try >/dev/null 2>&1
-	else
-		echo "(I can't seem to compile a trivial C program -- bypassing.)"
-		echo "try" >try
-		cp try try.ns
-	fi
-	$cat >tryinst <<EOS
-$startsh
-$rm -rf foo d
-\$1 -d foo/bar
-$mkdir d
-\$1 -c -m 764 try.ns d
-\$1 -c -s -m 642 try.ns d/try
-EOS
-	chmod +x tryinst
-	$eunicefix tryinst
-	dflt=''
-	either=''
-	for prog in $tryit; do
-		$echo $n "Checking $prog... $c"
-		./tryinst $prog >/dev/null 2>&1
-		if $test -d foo/bar; then
-			creatdir="$prog -d"
-		fi
-		(ls -l d/try >try.ls; ls -l d/try.ns >tryno.ls) 2>/dev/null
-		if (cmp -s d/try try && cmp -s d/try.ns try.ns && \
-			$contains 'rwxrw-r--' tryno.ls && \
-			$contains 'rw-r---w-' try.ls) >/dev/null 2>&1
-		then
-			dflt="$prog"
-			echo "ok, that will do."
-			break
-		fi
-		echo "not good$either."
-		either=' either'
-		$rm -f try*.ls
-	done
-	$rm -rf foo d tryinst try try*.ls try.*
-	case "$dflt" in
-	'')
-		echo "Hopefully, $package comes with its own install script!"
-		dflt='./install'
-		;;
-	esac
-	;;
-*) dflt="$install";;
-esac
-$cat <<EOM
-
-I will be requiring a BSD-compatible install program (one that allows
-options like -s to strip executables or -m to specify a file mode) to
-install $package.
-
-If the question below contains a fully qualified default path, then it
-is probably ok. If it is an unqualified name such as 'install', then it
-means I was unable to find out a good install program I could use. If
-you know of one, please tell me about it. If the default is './install',
-then I shall be using the install script supplied with $package.
-
-EOM
-fn='/fe~(install,./install)'
-rp='Which install program shall I use?'
-. ./getfile
-install="$ans"
-
-: how can we create nested directories?
-echo " "
-echo "Ok, let's see how we can create nested directories..." >&4
-case "$installdir" in
-'')
-	case "$creatdir" in
-	'')
-		$mkdir -p foo/bar >/dev/null 2>&1
-		if $test -d foo/bar; then
-			echo "Great, we can build them using 'mkdir -p'."
-			creatdir='mkdir -p'
-		elif eval "$install -d foo/bar"; $test -d foo/bar; then
-			creatdir="install -d"
-			echo "It looks like '$creatdir' will do it for us."
-		fi
-		;;
-	*)
-		eval "$creatdir foo/bar" >/dev/null 2>&1
-		if $test -d foo/bar; then
-			echo "Ah! We can use '$creatdir' to do just that."
-		fi
-		;;
-	esac
-	$rm -rf foo
-	case "$creatdir" in
-	'')
-		echo "Heck! Another ancient system lacking the comfort of modern ones!"
-		echo "You can thank $package for bringing you its own install script!"
-		installdir='./install -d'
-		;;
-	*) installdir="$creatdir";;
-	esac
-	;;
-*) echo "As you already told me, '$installdir' should work.";;
-esac
-
-: determine the name of a reasonable mailer
-case "$mailer" in
-'')
-	if $test -f "$sendmail"; then
-		dflt="$sendmail"
-	elif $test -f "$smail"; then
-		dflt="$smail"
-	elif $test -f "$rmail"; then
-		dflt="$rmail"
-	elif $test -f /bin/mail; then
-		dflt=/bin/mail
-	else
-		dflt=$mail
-	fi
-	;;
-*)  dflt="$mailer";;
-esac
-$cat <<EOM
-
-I need the full pathname of the program used to deliver mail on your system.
-A typical answer would be /usr/lib/sendmail or /bin/rmail, but you may choose
-any other program, as long as it can be fed from standard input and will
-honour any user-supplied headers.
-
-EOM
-fn=f
-rp='Mail transport agent to be used?'
-. ./getfile
-mailer="$ans"
-
-: see how we invoke the C preprocessor
+EOM
+      ;;
+   *) gccosandvers='' ;; # failed to parse, better be silent
+   esac
+   ;;
+esac
+case "$ccname" in
+'') ccname="$cc" ;;
+esac
+
+: gcc 3.1 complains about adding -Idirectories that it already knows about,
+: so we will take those off from locincpth.
+case "$gccversion" in
+3*)
+    echo "main(){}">try.c
+    for incdir in `$cc -v -c try.c 2>&1 | \
+       sed '1,/^#include <\.\.\.>/d;/^End of search list/,$d;s/^ //'` ; do
+       locincpth=`echo $locincpth | sed s!$incdir!!`
+    done
+    $rm -f try try.*
+esac
+
+: see how we invoke the C preprocessor
 echo " "
 echo "Now, how can we feed standard input to your C preprocessor..." >&4
 cat <<'EOT' >testcpp.c
@@ -3007,8 +3428,20 @@ cat <<'EOT' >testcpp.c
 ABC.XYZ
 EOT
 cd ..
-echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+if $test ! -f cppstdin; then
+	echo "$startsh" >cppstdin
+if $test "X$osname" = "Xaix" -a "X$gccversion" = X; then
+	echo 'cat >.$$.c; rm -f .$$.u; '"$cc"' ${1+"$@"} -M -c .$$.c 2>/dev/null; \
+	test -s .$$.u && \
+	awk '"'"'$2 ~ /\.h$/ { print "# 0 \""$2"\"" }'"'"' .$$.u; \
+	rm -f .$$.o .$$.u; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >> cppstdin
+else
+	echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >>cppstdin
+fi; else
+	echo "Keeping your $hint cppstdin wrapper."
+fi
 chmod 755 cppstdin
+$eunicefix cppstdin
 wrapper=`pwd`/cppstdin
 ok='false'
 cd UU
@@ -3131,212 +3564,497 @@ false)
 esac
 
 case "$cppstdin" in
-"$wrapper") ;;
+"$wrapper"|'cppstdin') ;;
 *) $rm -f $wrapper;;
 esac
 $rm -f testcpp.c testcpp.out
 
-: find out how to generate dependencies
-echo " "
-echo "Checking how to generate makefile dependencies on your machine..." >&4
-toplev=`cd ..;pwd`
-$cat >dep.c <<'EOCP'
-#include "dep.h"
-EOCP
-$cat >dep.h <<'EOCP'
+: Set private lib path
+case "$plibpth" in
+'') if ./mips; then
+		plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
+	fi;;
+esac
+case "$libpth" in
+' ') dlist='';;
+'') dlist="$loclibpth $plibpth $glibpth";;
+*) dlist="$libpth";;
+esac
 
-EOCP
-takeflags='flags=""
-case "$@" in
-*--*)
-	for arg
-	do
-		shift
-		case "$arg" in
-		--) break;;
-		*) flags="$flags $arg";;
+: Now check and see which directories actually exist, avoiding duplicates
+libpth=''
+for xxx in $dlist
+do
+    if $test -d $xxx; then
+		case " $libpth " in
+		*" $xxx "*) ;;
+		*) libpth="$libpth $xxx";;
 		esac
-	done;;
-esac'
-case "$mkdep" in
-'')
-	;;
+    fi
+done
+$cat <<'EOM'
+
+Some systems have incompatible or broken versions of libraries.  Among
+the directories listed in the question below, please remove any you
+know not to be holding relevant libraries, and add any that are needed.
+Say "none" for none.
+
+EOM
+case "$libpth" in
+'') dflt='none';;
 *)
-	if test -f "$mkdep" &&
-		$mkdep dep.c >dep.out 2>/dev/null &&
-		$contains "dep$_o:.*dep\.h" dep.out >/dev/null 2>&1
-	then
-		echo "$mkdep works."
-	else
-		mkdep=
-	fi
+	set X $libpth
+	shift
+	dflt=${1+"$@"}
+	;;
+esac
+rp="Directories to use for library searches?"
+. ./myread
+case "$ans" in
+none) libpth=' ';;
+*) libpth="$ans";;
 esac
 
-case "$mkdep" in
-'')
-	$spitshell > ../mkdep <<EOM
-$startsh
-$takeflags
-for srcfile
-do
-	$cpp -M -I. $cppflags \$flags \$srcfile 2>/dev/null
+: determine optimize, if desired, or use for debug flag also
+case "$optimize" in
+' '|$undef) dflt='none';;
+'') dflt='-O';;
+*) dflt="$optimize";;
+esac
+$cat <<EOH
+
+Some C compilers have problems with their optimizers.  By default, $package
+compiles with the -O flag to use the optimizer.  Alternately, you might want
+to use the symbolic debugger, which uses the -g flag (on traditional Unix
+systems).  Either flag can be specified here.  To use neither flag, specify
+the word "none".
+
+EOH
+rp="What optimizer/debugger flag should be used?"
+. ./myread
+optimize="$ans"
+case "$optimize" in
+'none') optimize=" ";;
+esac
+
+dflt=''
+: We will not override a previous value, but we might want to
+: augment a hint file
+case "$hint" in
+default|recommended)
+	case "$gccversion" in
+	1*) dflt='-fpcc-struct-return' ;;
+	esac
+	case "$gccversion" in
+	2*) if test -d /etc/conf/kconfig.d &&
+			$contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
+		then
+			dflt="$dflt -posix"
+		fi
+		;;
+	esac
+	case "$gccversion" in
+	1*|2*) dflt="$dflt -Wall";;
+	*) dflt="$dflt -W -Wall -Wformat=2";;
+	esac
+	;;
+esac
+
+case "$mips_type" in
+*BSD*|'') inclwanted="$locincpth $usrinc";;
+*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
+esac
+for thisincl in $inclwanted; do
+	if $test -d $thisincl; then
+		if $test x$thisincl != x$usrinc; then
+			case "$dflt" in
+			*$thisincl*);;
+			*) dflt="$dflt -I$thisincl";;
+			esac
+		fi
+	fi
 done
-exit 0
+
+inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
+	xxx=true;
+elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
+	xxx=true;
+else
+	xxx=false;
+fi;
+if $xxx; then
+	case "$dflt" in
+	*$2*);;
+	*) dflt="$dflt -D$2";;
+	esac;
+fi'
+
+if ./osf1; then
+	set signal.h __LANGUAGE_C__; eval $inctest
+else
+	set signal.h LANGUAGE_C; eval $inctest
+fi
+
+case "$hint" in
+default|recommended) dflt="$ccflags $dflt" ;;
+*) dflt="$ccflags";;
+esac
+
+case "$dflt" in
+''|' ') dflt=none;;
+esac
+$cat <<EOH
+
+Your C compiler may want other flags.  For this question you should include
+-I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
+but you should NOT include libraries or ld flags like -lwhatever.
+
+To use no flags, specify the word "none".
+
+EOH
+set X $dflt
+shift
+dflt=${1+"$@"}
+rp="Any additional cc flags?"
+. ./myread
+case "$ans" in
+none) ccflags='';;
+*) ccflags="$ans";;
+esac
+
+: the following weeds options from ccflags that are of no interest to cpp
+cppflags="$ccflags"
+case "$gccversion" in
+1*) cppflags="$cppflags -D__GNUC__"
+esac
+case "$mips_type" in
+'');;
+*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
+esac
+case "$cppflags" in
+'');;
+*)
+	echo " "
+	echo "Let me guess what the preprocessor flags are..." >&4
+	set X $cppflags
+	shift
+	cppflags=''
+	$cat >cpp.c <<'EOM'
+#define BLURFL foo
+
+BLURFL xx LFRULB
 EOM
-	mkdep=$toplev/mkdep
-	chmod +x $mkdep
-	$eunicefix $mkdep
-	if $mkdep dep.c >dep.out 2>/dev/null &&
-		$contains "dep$_o:.*dep\.h" dep.out >/dev/null 2>&1
-	then
-		echo "Looks like we can use $cpp -M."
+	previous=''
+	for flag in $*
+	do
+		case "$flag" in
+		-*) ftry="$flag";;
+		*) ftry="$previous $flag";;
+		esac
+		if $cppstdin -DLFRULB=bar $ftry $cppminus <cpp.c \
+			>cpp1.out 2>/dev/null && \
+			$cpprun -DLFRULB=bar $ftry $cpplast <cpp.c \
+			>cpp2.out 2>/dev/null && \
+			$contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
+			$contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
+		then
+			cppflags="$cppflags $ftry"
+			previous=''
+		else
+			previous="$flag"
+		fi
+	done
+	set X $cppflags
+	shift
+	cppflags=${1+"$@"}
+	case "$cppflags" in
+	*-*)  echo "They appear to be: $cppflags";;
+	esac
+	$rm -f cpp.c cpp?.out
+	;;
+esac
+
+: flags used in final linking phase
+case "$ldflags" in
+'') if ./venix; then
+		dflt='-i -z'
 	else
-		mkdep=
+		dflt=''
 	fi
+	case "$ccflags" in
+	*-posix*) dflt="$dflt -posix" ;;
+	esac
 	;;
+*) dflt="$ldflags";;
 esac
 
-case "$mkdep" in
-'')
-	$spitshell > ../mkdep <<EOM
-$startsh
-$takeflags
-for srcfile
-do
-	$cc -MM -I. $cppflags \$flags \$srcfile 2>/dev/null
+: Try to guess additional flags to pick up local libraries.
+for thislibdir in $libpth; do
+	case " $loclibpth " in
+	*" $thislibdir "*)
+		case "$dflt " in 
+		*"-L$thislibdir "*) ;;
+		*)  dflt="$dflt -L$thislibdir" ;;
+		esac
+		;;
+	esac
 done
-exit 0
+
+case "$dflt" in
+'') dflt='none' ;;
+*) set X $dflt; shift; dflt="$@";;
+esac
+
+$cat <<EOH
+
+Your C linker may need flags.  For this question you should
+include -L/whatever and any other flags used by the C linker, but you
+should NOT include libraries like -lwhatever.
+
+Make sure you include the appropriate -L/path flags if your C linker
+does not normally search all of the directories you specified above,
+namely
+	$libpth
+To use no flags, specify the word "none".
+
+EOH
+
+rp="Any additional ld flags (NOT including libraries)?"
+. ./myread
+case "$ans" in
+none) ldflags='';;
+*) ldflags="$ans";;
+esac
+rmlist="$rmlist pdp11"
+
+: coherency check
+echo " "
+echo "Checking your choice of C compiler and flags for coherency..." >&4
+set X $cc $optimize $ccflags $ldflags -o try try.c
+shift
+$cat >try.msg <<EOM
+I've tried to compile and run a simple program with:
+
+	$*
+	./try
+
+and I got the following output:
+
 EOM
-	mkdep=$toplev/mkdep
-	chmod +x $mkdep
-	$eunicefix $mkdep
-	if $mkdep dep.c >dep.out 2>/dev/null &&
-		$contains "dep$_o: dep.h" dep.out >/dev/null 2>&1
-	then
-		echo "Looks like we can use $cc -MM."
+$cat > try.c <<'EOF'
+#include <stdio.h>
+int main() { exit(0); }
+EOF
+dflt=y
+if sh -c "$cc $optimize $ccflags $ldflags -o try try.c" >>try.msg 2>&1; then
+	if sh -c './try' >>try.msg 2>&1; then
+		dflt=n
 	else
-		mkdep=
+		echo "The program compiled OK, but exited with status $?." >>try.msg
+		rp="You have a problem.  Shall I abort Configure"
+		dflt=y
 	fi
+else
+	echo "I can't compile the test program." >>try.msg
+	rp="You have a BIG problem.  Shall I abort Configure"
+	dflt=y
+fi
+case "$dflt" in
+y)
+	$cat try.msg >&4
+	case "$knowitall" in
+	'')
+		echo "(The supplied flags might be incorrect with this C compiler.)"
+		;;
+	*) dflt=n;;
+	esac
+	echo " "
+	. ./myread
+	case "$ans" in
+	n*|N*) ;;
+	*)	echo "Ok.  Stopping Configure." >&4
+		exit 1
+		;;
+	esac
 	;;
+n) echo "OK, that should do.";;
 esac
+$rm -f try try.* core
 
-case "$mkdep" in
+: determine default editor
+echo " "
+case "$defeditor" in
 '')
-	$spitshell >../mkdep <<EOS
-$startsh
-$takeflags
-for srcfile
-do
-	case "\$srcfile" in
-	*.c) c='.c';;
-	*.y) c='.y';;
-	*.l) c='.l';;
-	esac
-	filebase=\`basename \$srcfile \$c\`
-	<\$srcfile $cpp $cppminus $cppflags -I. \$flags 2>/dev/null | \\
-	$sed -e '/^# *[0-9]/!d' \\
-		-e 's/^.*"\(.*\)".*\$/'\$filebase'$_o: \1/' \\
-		-e 's|: \./|: |' \\
-		-e 's|: *$|: '\$srcfile'|' | \\
-	$grep -v '^#' | $sort | $uniq
-done
-exit 0
-EOS
-	mkdep=$toplev/mkdep
-	chmod +x $mkdep
-	$eunicefix $mkdep
-	if $mkdep dep.c >dep.out 2>/dev/null &&
-		$contains "dep$_o:.*dep\.h" dep.out >/dev/null 2>&1
-	then
-		echo "A shell script using $cpp does the trick."
-	else
-		echo "$cpp doesn't seem to be any use at all."
-		$spitshell >../mkdep <<EOS
-$startsh
-$takeflags
-files="\$@"
-set X \$flags
-shift
-inc='.'
-while test \$# -gt 0
-do
-	case "\$1" in
-	-I) 
-		shift
-		inc="\$inc:\$1"
-		;;
-	-I*)
-		dir=\`echo \$1 | sed -e 's/^-I//'\`
-		inc="\$inc:\$dir"
-		;;
+	case "$vi" in
+	*/*) dflt="$vi";;
+	*) dflt=/usr/ucb/vi;;
 	esac
-	shift
-done
-set X \$files
-shift
-trap "$rm -f /tmp/mkdep\$\$; exit 1" 1 2 3 15
-for srcfile
-do
-	case "\$srcfile" in
-	*.c) c='.c';;
-	*.y) c='.y';;
-	*.l) c='.l';;
-	esac
-	filebase=\`basename \$srcfile \$c\`
-	echo \$filebase$_o: \$srcfile
-	$grep '^#[  ]*include' \$srcfile /dev/null | \
-	$sed -n -e 's/#[   ]*include[  ]*//' \\
-		-e '/<\(.*\)>/ d' \\
-		-e 's/:[^"]*"\([^"]*\)".*/: \1/' \\
-		-e "s/\\.c:/$_o:/p" > /tmp/mkdep\$\$
-	IFS=': '
-	while read file dep; do
-		for dir in \$inc; do
-			if $test -f "\$dir/\$dep"; then
-				dep="\$dir/\$dep"
-				break
+	;;
+*)  dflt="$defeditor"
+	;;
+esac
+fn=f/
+rp="What is the default editor on your system?"
+. ./getfile
+defeditor="$ans"
+
+: locate a BSD compatible install program
+echo " "
+echo "Looking for a BSD-compatible install program..." >&4
+creatdir=''
+case "$install" in
+'')
+	tryit=''
+	for dir in $pth; do
+		for file in ginstall installbsd scoinst install; do
+			if $test -f $dir/$file; then
+				tryit="$tryit $dir/$file"
 			fi
 		done
-		echo "\$file: \$dep" | $sed -e 's,: \./,: ,'
-	done </tmp/mkdep\$\$
-	IFS=' '
-	$rm -f /tmp/mkdep\$\$
-done
-exit 0
+	done
+	$cat >try.c <<EOC
+int main()
+{
+	printf("OK\n");
+	exit(0);
+}
+EOC
+	if $cc -o try try.c >/dev/null 2>&1; then
+		cp try try.ns
+		strip try >/dev/null 2>&1
+	else
+		echo "(I can't seem to compile a trivial C program -- bypassing.)"
+		echo "try" >try
+		cp try try.ns
+	fi
+	$cat >tryinst <<EOS
+$startsh
+$rm -rf foo d
+\$1 -d foo/bar
+$mkdir d
+\$1 -c -m 764 try.ns d
+\$1 -c -s -m 642 try.ns d/try
 EOS
-		mkdep=$toplev/mkdep
-		chmod +x $mkdep
-		$eunicefix $mkdep
-		if $mkdep dep.c >dep.out 2>/dev/null &&
-			$contains "dep$_o:.*dep\.h" dep.out >/dev/null 2>&1
+	chmod +x tryinst
+	$eunicefix tryinst
+	dflt=''
+	either=''
+	for prog in $tryit; do
+		$echo $n "Checking $prog... $c"
+		./tryinst $prog >/dev/null 2>&1
+		if $test -d foo/bar; then
+			creatdir="$prog -d"
+		fi
+		(ls -l d/try >try.ls; ls -l d/try.ns >tryno.ls) 2>/dev/null
+		if (cmp -s d/try try && cmp -s d/try.ns try.ns && \
+			$contains 'rwxrw-r--' tryno.ls && \
+			$contains 'rw-r---w-' try.ls) >/dev/null 2>&1
 		then
-			cat << EOM
-
-I can use a script with grep instead, but it will make some incorrect
-dependencies, since it doesn't understand about conditional compilation.
-Moreover, some dependencies may be missing, because scanning won't be
-a recursive process.
-If you have a program which generates makefile dependencies, you may want
-to use it.  If not, you can use the script and edit the Makefile by hand
-if you need to.
-EOM
-		else
-			mkdep=
-			cat << EOM
+			dflt="$prog"
+			echo "ok, that will do."
+			break
+		fi
+		echo "not good$either."
+		either=' either'
+		$rm -f try*.ls
+	done
+	$rm -rf foo d tryinst try try*.ls try.*
+	case "$dflt" in
+	'')
+		echo "Hopefully, $package comes with its own install script!"
+		dflt='./install'
+		;;
+	esac
+	;;
+*) dflt="$install";;
+esac
+$cat <<EOM
+
+I will be requiring a BSD-compatible install program (one that allows
+options like -s to strip executables or -m to specify a file mode) to
+install $package.
+
+If the question below contains a fully qualified default path, then it
+is probably ok. If it is an unqualified name such as 'install', then it
+means I was unable to find out a good install program I could use. If
+you know of one, please tell me about it. If the default is './install',
+then I shall be using the install script supplied with $package.
 
-I can't seem to generate makefile dependencies at all!  Perhaps you have a
-program that does?  If you don't, you might look at the mkdep script to
-see if you can create one which works.
 EOM
-		fi
+fn='/fe~(install,./install)'
+rp='Which install program shall I use?'
+. ./getfile
+install="$ans"
+
+: how can we create nested directories?
+echo " "
+echo "Ok, let's see how we can create nested directories..." >&4
+case "$installdir" in
+'')
+	$mkdir -p foo/bar >/dev/null 2>&1
+	if $test -d foo/bar; then
+		echo "Great, we can build them using 'mkdir -p'."
+		creatdir='mkdir -p'
+	else
+		case "$creatdir" in
+		'')
+			if eval "$install -d foo/bar"; $test -d foo/bar; then
+				creatdir="install -d"
+				echo "It looks like '$creatdir' will do it for us."
+			fi
+			;;
+		*)
+			eval "$creatdir foo/bar" >/dev/null 2>&1
+			if $test -d foo/bar; then
+				echo "Ah! We can use '$creatdir' to do just that."
+			else
+				creatdir=''
+			fi
+			;;
+		esac
 	fi
+	$rm -rf foo
+	case "$creatdir" in
+	'')
+		echo "Heck! Another ancient system lacking the comfort of modern ones!"
+		echo "You can thank $package for bringing you its own install script!"
+		installdir='./install -d'
+		;;
+	*) installdir="$creatdir";;
+	esac
+	;;
+*) echo "As you already told me, '$installdir' should work.";;
 esac
-dflt="$mkdep"
-fn=f~/
-rp="Name of program to make makefile dependencies?"
+
+: determine the name of a reasonable mailer
+case "$mailer" in
+'')
+	if $test -f "$sendmail"; then
+		dflt="$sendmail"
+	elif $test -f "$smail"; then
+		dflt="$smail"
+	elif $test -f "$rmail"; then
+		dflt="$rmail"
+	elif $test -f /bin/mail; then
+		dflt=/bin/mail
+	else
+		dflt=$mail
+	fi
+	;;
+*)  dflt="$mailer";;
+esac
+$cat <<EOM
+
+I need the full pathname of the program used to deliver mail on your system.
+A typical answer would be /usr/lib/sendmail or /bin/rmail, but you may choose
+any other program, as long as it can be fed from standard input and will
+honour any user-supplied headers.
+
+EOM
+fn=f
+rp='Mail transport agent to be used?'
 . ./getfile
-mkdep="$ans"
-$rm -f dep.c dep.h dep$_o dep.out
+mailer="$ans"
 
 : find out how to find out full name
 case "$d_berknames" in
@@ -3444,26 +4162,31 @@ while test "X$orgname" = "X"; do
 done
 
 : locate the preferred pager for this system
+fn=f/
 case "$pager" in
 '')
 	dflt=''
 	case "$pg" in
 	/*) dflt=$pg;;
+	[a-zA-Z]:/*) dflt=$pg;;
 	esac
 	case "$more" in
 	/*) dflt=$more;;
+	[a-zA-Z]:/*) dflt=$more;;
 	esac
 	case "$less" in
 	/*) dflt=$less;;
+	[a-zA-Z]:/*) dflt=$less;;
 	esac
 	case "$dflt" in
 	'') dflt=/usr/ucb/more;;
 	esac
 	;;
-*) dflt="$pager";;
+*)	dflt="$pager"
+	fn="f/($pager)"
+	;;
 esac
 echo " "
-fn=f/
 rp='What pager is used on your system?'
 . ./getfile
 pager="$ans"
@@ -3610,13 +4333,16 @@ $startsh
 # Configured by     : $cf_by
 # Target system     : $myuname
 
+EOT
+$test -f UU/cmdline.opt && $cat UU/cmdline.opt >> config.sh
+$spitshell <<EOT >>config.sh
+
 Author='$Author'
 Date='$Date'
 Header='$Header'
 Id='$Id'
 Locker='$Locker'
 Log='$Log'
-Mcc='$Mcc'
 RCSfile='$RCSfile'
 Revision='$Revision'
 Source='$Source'
@@ -3625,6 +4351,7 @@ _a='$_a'
 _exe='$_exe'
 _o='$_o'
 afs='$afs'
+afsroot='$afsroot'
 ar='$ar'
 archobjs='$archobjs'
 awk='$awk'
@@ -3634,6 +4361,7 @@ bison='$bison'
 byacc='$byacc'
 c='$c'
 cat='$cat'
+ccflags='$ccflags'
 ccname='$ccname'
 ccversion='$ccversion'
 cf_by='$cf_by'
@@ -3649,6 +4377,7 @@ cp='$cp'
 cpio='$cpio'
 cpp='$cpp'
 cpp_trad='$cpp_trad'
+cppflags='$cppflags'
 cpplast='$cpplast'
 cppminus='$cppminus'
 cpprun='$cpprun'
@@ -3656,8 +4385,10 @@ cppstdin='$cppstdin'
 csh='$csh'
 d_berknames='$d_berknames'
 d_bsd='$d_bsd'
+d_dos='$d_dos'
 d_eunice='$d_eunice'
 d_linux='$d_linux'
+d_os2='$d_os2'
 d_passnames='$d_passnames'
 d_portable='$d_portable'
 d_usgnames='$d_usgnames'
@@ -3673,12 +4404,16 @@ find='$find'
 firstmakefile='$firstmakefile'
 flex='$flex'
 from='$from'
+gccosandvers='$gccosandvers'
+gccversion='$gccversion'
+glibpth='$glibpth'
 gmake='$gmake'
 grep='$grep'
 groupcat='$groupcat'
 gzip='$gzip'
 hint='$hint'
 hostcat='$hostcat'
+incpath='$incpath'
 inews='$inews'
 install='$install'
 installdir='$installdir'
@@ -3687,11 +4422,16 @@ installprivlib='$installprivlib'
 installscript='$installscript'
 issymlink='$issymlink'
 ksh='$ksh'
+ldflags='$ldflags'
 less='$less'
+libpth='$libpth'
 line='$line'
 lint='$lint'
+lkflags='$lkflags'
 ln='$ln'
 lns='$lns'
+locincpth='$locincpth'
+loclibpth='$loclibpth'
 lp='$lp'
 lpr='$lpr'
 ls='$ls'
@@ -3703,7 +4443,7 @@ make_set_make='$make_set_make'
 manext='$manext'
 mansrc='$mansrc'
 mansrcexp='$mansrcexp'
-mkdep='$mkdep'
+mips_type='$mips_type'
 mkdir='$mkdir'
 more='$more'
 mv='$mv'
@@ -3714,6 +4454,7 @@ n='$n'
 nametype='$nametype'
 nm='$nm'
 nroff='$nroff'
+optimize='$optimize'
 orgname='$orgname'
 osname='$osname'
 osvers='$osvers'
@@ -3725,6 +4466,8 @@ perl='$perl'
 perlpath='$perlpath'
 pg='$pg'
 phostname='$phostname'
+pkgsrc='$pkgsrc'
+plibpth='$plibpth'
 pmake='$pmake'
 pr='$pr'
 prefix='$prefix'
@@ -3766,8 +4509,10 @@ troff='$troff'
 uname='$uname'
 uniq='$uniq'
 usecrosscompile='$usecrosscompile'
+usrinc='$usrinc'
 uuname='$uuname'
 vi='$vi'
+xlibpth='$xlibpth'
 zcat='$zcat'
 zip='$zip'
 EOT
@@ -3779,9 +4524,10 @@ echo "CONFIG=true" >>config.sh
 
 : propagate old symbols
 if $test -f UU/config.sh; then
-	<UU/config.sh sort | uniq >UU/oldconfig.sh
-	sed -n 's/^\([a-zA-Z_0-9]*\)=.*/\1/p' config.sh config.sh UU/oldconfig.sh |\
-	sort | uniq -u >UU/oldsyms
+	<UU/config.sh $sort | $uniq >UU/oldconfig.sh
+	$sed -n 's/^\([a-zA-Z_0-9]*\)=.*/\1/p' \
+		config.sh config.sh UU/oldconfig.sh |\
+		$sort | $uniq -u >UU/oldsyms
 	set X `cat UU/oldsyms`
 	shift
 	case $# in
@@ -3790,7 +4536,7 @@ if $test -f UU/config.sh; then
 		cat <<EOM
 Hmm...You had some extra variables I don't know about...I'll try to keep 'em...
 EOM
-		echo "# Variables propagated from previous config.sh file." >>config.sh
+		echo ": Variables propagated from previous config.sh file." >>config.sh
 		for sym in `cat UU/oldsyms`; do
 			echo "    Propagating $hint variable "'$'"$sym..."
 			eval 'tmp="$'"${sym}"'"'
diff --git a/patchlevel.h b/patchlevel.h
index 98a391c..b3ccc99 100644
--- a/patchlevel.h
+++ b/patchlevel.h
@@ -1,4 +1,5 @@
 /* dist-3.0 - 18 Aug 1993 */
+/* dist-3.5 - 25 Aug 2006 */
 
-#define VERSION 3.0
-#define PATCHLEVEL 70
+#define VERSION 3.5
+#define PATCHLEVEL 0
-- 
cgit v1.2.3