/*
 * Generic jmake template
 *
 * $Id: Jmake.tmpl 156 2012-12-19 16:44:39Z rmanfredi $
 *
 *  Copyright (c) 1991-1997, 2004-2006, Raphael Manfredi
 *  
 *  You may redistribute only under the terms of the Artistic Licence,
 *  as specified in the README file that comes with the distribution.
 *  You may reuse parts of this distribution only within the terms of
 *  that same Artistic Licence; a copy of which may be found at the root
 *  of the source tree for dist 4.0.
 *
 * $Log: Jmake.tmpl,v $
 * Revision 3.0.1.3  1997/02/28  14:56:16  ram
 * patch61: lex path can now be configured
 *
 * Revision 3.0.1.2  1995/01/11  14:50:21  ram
 * patch45: now pre-computes INSTALL and INSTALLDIR variables
 *
 * Revision 3.0.1.1  1993/08/20  07:36:36  ram
 * patch3: config.sh searching was not aborting properly
 *
 * Revision 3.0  1993/08/18  12:04:16  ram
 * Baseline for dist 3.0 netwide release.
 *
 */

: Makefile.SH generated from Jmake.tmpl and Jmakefile <TAG>
: $Id: Jmake.tmpl 156 2012-12-19 16:44:39Z rmanfredi $

/*************************************************************************
 *                                                                       *
 *                     DO NOT MODIFY BELOW THIS LINE                     *
 *                                                                       *
 *************************************************************************/

case $CONFIG in
'')
	if test -f config.sh; then TOP=.;
	elif test -f ../config.sh; then TOP=..;
	elif test -f ../../config.sh; then TOP=../..;
	elif test -f ../../../config.sh; then TOP=../../..;
	elif test -f ../../../../config.sh; then TOP=../../../..;
	else
		echo "Can't find config.sh."; exit 1
	fi
	. $TOP/config.sh
	;;
esac
case "$0" in
*/#*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
|expand cur!CURDIR!
CURRENT=!cur:^\./=
-expand
DIR=`echo $CURRENT/ | sed -e 's/\.\///g'`
echo "Extracting ${DIR}Makefile (with variable substitutions)"
/*
 * Variable pre-computation.
 */
?INSTALL:INSTALL=`echo $install | sed -e 's,\./i,\$(TOP)/i,'`
?INSTALLDIR:INSTALLDIR=`echo $installdir | sed -e 's,\./i,\$(TOP)/i,'`
DATE=`date`
/*
 * Makefile generation.
 */
$spitshell >Makefile <<!GROK!THIS!
;########################################################################
;# Makefile generated from Makefile.SH on $DATE

SHELL = /bin/sh
JMAKE = jmake
TOP = TOPDIR
CURRENT = $CURRENT
DIR = $DIR
?INSTALL:INSTALL = $INSTALL
?INSTALLDIR:INSTALLDIR = $INSTALLDIR

;########################################################################
;# Parameters set by Configure -- edit config.sh if changes are needed

?AR:AR = ar rc				/* FIXME */
?ARCHLIB:ARCHLIB = $installarchlib
?BINDIR:BINDIR = $installbin
?CC:CC = $cc
?CHMOD:CHMOD = $chmod
?CP:CP = $cp
?CPP:CPP = $cpp $cppminus $cppflags
?CTAGS:CTAGS = ctags		/* FIXME */
?_EXE:_EXE = $_exe
?INSTALLPREFIX:INSTALLPREFIX = $prefix
?JCFLAGS:JCFLAGS = \$(CFLAGS) $optimize $pthread $ccflags $large
?JCPPFLAGS:JCPPFLAGS = $cppflags
?JLDFLAGS:JLDFLAGS = \$(LDFLAGS) $optimize $pthread $ldflags
?JLFLAGS:JLFLAGS = \$(LFLAGS)
?JYFLAGS:JYFLAGS = \$(YFLAGS) $yaccflags
?L:L = $manext
?LD:LD = ld
?LEX:LEX = $lex
?LIBS:LIBS = $libs
?LINT:LINT = lint
?LN:LN = $ln
?MANSRC:MANSRC = $installmansrc
?MAKE:$make_set_make
?MKDEP:MKDEP = $mkdep \$(DPFLAGS) \$(JCPPFLAGS) --
?MV:MV = $mv
?NM:NM = $nm
?PRIVLIB:PRIVLIB = $installprivlib
?RANLIB:RANLIB = $ranlib
?RM:RM = $rm -f
?SCRIPTDIR:SCRIPTDIR = $installscript
?SED:SED = $sed
?YACC:YACC = $yacc

/*
 * The following will only be added if at least one initialization
 * rule was found in the Jmakefile.
 */
%INIT:|skip			/* Skip if no initializations are necessary */
;########################################################################
;# Automatically generated parameters -- do not edit

INIT_SECTION

-skip				/* Initializations */
%SUFFIX:|skip		/* Skip if no suffixes/rules are defined */
;########################################################################
;# New suffixes and associated building rules -- edit with care

SUFFIX_SECTION
-skip				/* Suffixes/Rules */
!GROK!THIS!
$spitshell >>Makefile <<'!NO!SUBS!'
#include <Jmake.rules>

%MKDEP:|skip		/* Skip if no depend target */
;########################################################################
;# Force 'make depend' to be performed first -- do not edit
/*
 * The "all" target must appear first.  Some "make" programs will otherwise
 * default to the .FORCE_DEPEND target if it was listed first, despite it
 * starting with a leading dot.
 */
all:: .FORCE_DEPEND

.FORCE_DEPEND::

-skip				/* Depend target */
;########################################################################
;# Start of Jmakefile
#include <Jmakefile>

;########################################################################
;# Common rules for all Makefiles -- do not edit
/*
 * These need to be here so that rules in Jmakefile occur first;  the blank
 * all is to make sure that an empty Jmakefile doesn't default to make clean.
 */
all::

CleanTarget()
InstallTarget()

/*
 * The installation of manual pages is optional.  When they say "none" in
 * Configure, then they don't want any manual page and $installmansrc will
 * be empty.
 *
 * To avoid protecting all the jmake rules for an empty destination, we use
 * this clever hack: there is an "install.man-no" and an "install.man-yes"
 * target defined, where the first does nothing and the second triggers
 * the local install.  The same goes for deinstall.
 *
 * If the `MANSRC' symbol is not wanted, then there is no manual page
 * and we can force the -no version of the targets.
 */
%MANSRC:|skip		/* Skip if no manual targets */
!NO!SUBS!
case "$installmansrc" in
'') man=no;;
*) man=yes;;
esac
$spitshell >>Makefile <<!GROK!THIS!
maybe_install.man: install.man-$man
maybe_deinstall.man: deinstall.man-$man
!GROK!THIS!
$spitshell >>Makefile <<'!NO!SUBS!'
-skip
?MANSRC:|skip		/* Skip if it has manual targets */
maybe_install.man: install.man-no
maybe_deinstall.man: deinstall.man-no
-skip

MakefileTarget()
TagsTarget()

/*
 * Empty rules in case there is no depend target.
 */
depend::

%SUBDIRS:|skip		/* Skip if no sub-directories */
;########################################################################
;# Rules for building in sub-directories -- do not edit

CommonSubdirsRule($(SUBDIRS))
InstallSubdirs()
InstallManSubdirs()
CleanSubdirs()
TagSubdirs($(SUBDIRS))
MakefileSubdirs()
MakeSubdirs()

/*
 * Empty rules in case they don't define anything to be installed
 * in this directory.
 */
local_install::
local_deinstall::
local_install.man::
local_deinstall.man::

-skip				/* Sub-directories */
?SUBDIRS:|skip		/* Skip if sub-directories */
;########################################################################
;# Empty rules for directories with no sub-directories -- do not edit

local_install::
	@echo "install in $(CURRENT) done."

local_deinstall::
	@echo "deinstall in $(CURRENT) done."

local_install.man::
	@echo "install.man in $(CURRENT) done."

local_deinstall.man::
	@echo "deinstall.man in $(CURRENT) done."

/*
 * Action for 'Makefiles' would be required, if a .SUFFIXES: .SH rule
 * were added, because in that case, a "/bin/sh Makefiles.SH" would
 * be issued and raise an error.
 */
Makefiles::

Makefiles.SH::

-skip					/* No sub-directories */
%local_depend%:|skip	/* Skip if no local depend target */
;########################################################################
;# Dependencies generated by make depend
;# DO NOT DELETE THIS LINE -- make depend relies on it

;# Put nothing here or make depend will gobble it up
.FORCE_DEPEND::
?TOP: @echo "You haven't run a 'make depend' yet!"; exit 1
%TOP: @echo "You must run 'make depend' in $(TOP) first."; exit 1
-skip				/* Depend target */
!NO!SUBS!
chmod 644 Makefile
$eunicefix Makefile