man/elogind.xml: Added check_tree.pl compatible elogind masking.

1 files changed, 1202 insertions, 1 deletions

diff --git a/man/elogind.xml b/man/elogind.xml
index 19dbd477e..7173b2745 100644
--- a/man/elogind.xml
+++ b/man/elogind.xml
@@ -40,21 +40,71 @@
 
   <refmeta>
     <refentrytitle>elogind</refentrytitle>
+    <!-- 0 /// elogind is in section 8
+    <manvolnum>1</manvolnum>
+    --><!-- else -->
     <manvolnum>8</manvolnum>
+    <!-- // 0 -->
   </refmeta>
 
   <refnamediv>
+    <!-- 0 /// Well, elogind isn't that much...
+    <refname>systemd</refname>
+    <refname>init</refname>
+    <refpurpose>systemd system and service manager</refpurpose>
+    --><!-- else -->
     <refname>elogind</refname>
     <refpurpose>Login manager</refpurpose>
+    <!-- // 0 -->
   </refnamediv>
 
   <refsynopsisdiv>
-    <para><filename>/usr/libexec/elogind/elogind</filename></para>
+    <!-- 0 /// elogind has a different synopsis of course...
+    <cmdsynopsis>
+      <command>systemd</command>
+      <arg choice="opt" rep="repeat">OPTIONS</arg>
+    </cmdsynopsis>
+    <cmdsynopsis>
+      <command>init</command>
+      <arg choice="opt" rep="repeat">OPTIONS</arg>
+      <arg choice="req">COMMAND</arg>
+    </cmdsynopsis>
+    --><!-- else -->
+    <cmdsynopsis>
+      <command>elogind</command>
+      <arg choice="opt" rep="repeat">OPTIONS</arg>
+      <arg choice="req">COMMAND</arg>
+    </cmdsynopsis>
+    <!-- // 0 -->
   </refsynopsisdiv>
 
   <refsect1>
     <title>Description</title>
 
+    <!-- 0 /// elogind does not need that much explanation.
+    <para>systemd is a system and service manager for Linux operating
+    systems. When run as first process on boot (as PID 1), it acts as
+    init system that brings up and maintains userspace
+    services.</para>
+
+    <para>For compatibility with SysV, if systemd is called as
+    <command>init</command> and a PID that is not 1, it will execute
+    <command>telinit</command> and pass all command line arguments
+    unmodified. That means <command>init</command> and
+    <command>telinit</command> are mostly equivalent when invoked from
+    normal login sessions. See
+    <citerefentry><refentrytitle>telinit</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+    for more information.</para>
+
+    <para>When run as a system instance, systemd interprets the
+    configuration file <filename>system.conf</filename> and the files
+    in <filename>system.conf.d</filename> directories; when run as a
+    user instance, systemd interprets the configuration file
+    <filename>user.conf</filename> and the files in
+    <filename>user.conf.d</filename> directories. See
+    <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+    for more information.</para>
+    --><!-- else -->
     <para><command>elogind</command> is a system service that
     manages user logins. It is responsible for:</para>
 
@@ -101,14 +151,1165 @@
     <para>For more information on the inhibition logic see the <ulink
     url="http://www.freedesktop.org/wiki/Software/systemd/inhibit">Inhibitor
     Lock Developer Documentation</ulink>.</para>
+  <!-- // 0 -->
+  </refsect1>
+
+  <refsect1>
+    <title>Options</title>
+
+    <para>The following options are understood:</para>
+
+    <variablelist>
+    <!-- 0 /// This list is much shorter with elogind of course.
+      <varlistentry>
+        <term><option>--test</option></term>
+
+        <listitem><para>Determine startup sequence, dump it and exit.
+        This is an option useful for debugging only.</para></listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--dump-configuration-items</option></term>
+
+        <listitem><para>Dump understood unit configuration items. This
+        outputs a terse but complete list of configuration items
+        understood in unit definition files.</para></listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--unit=</option></term>
+
+        <listitem><para>Set default unit to activate on startup. If
+        not specified, defaults to
+        <filename>default.target</filename>.</para></listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--system</option></term>
+        <term><option>--user</option></term>
+
+        <listitem><para>For <option>--system</option>, tell systemd to
+        run a system instance, even if the process ID is not 1, i.e.
+        systemd is not run as init process. <option>--user</option>
+        does the opposite, running a user instance even if the process
+        ID is 1. Normally, it should not be necessary to pass these
+        options, as systemd automatically detects the mode it is
+        started in. These options are hence of little use except for
+        debugging. Note that it is not supported booting and
+        maintaining a full system with systemd running in
+        <option>--system</option> mode, but PID not 1. In practice,
+        passing <option>--system</option> explicitly is only useful in
+        conjunction with <option>--test</option>.</para></listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--dump-core</option></term>
+
+        <listitem><para>Enable core dumping on crash. This switch has
+        no effect when running as user instance. This setting may also
+        be enabled during boot on the kernel command line via the
+        <varname>systemd.dump_core=</varname> option, see
+        below.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--crash-vt=</option><replaceable>VT</replaceable></term>
+
+        <listitem><para>Switch to a specific virtual console (VT) on
+        crash. Takes a positive integer in the range 1–63, or a
+        boolean argument. If an integer is passed, selects which VT to
+        switch to. If <constant>yes</constant>, the VT kernel messages
+        are written to is selected. If <constant>no</constant>, no VT
+        switch is attempted. This switch has no effect when running as
+        user instance. This setting may also be enabled during boot,
+        on the kernel command line via the
+        <varname>systemd.crash_vt=</varname> option, see
+        // 0 -->
+        <!-- FIXME: there is no crash_vt command line option? -->
+        <!-- 0 /// elogind check_tree.pl can not mangle closed comments.
+        below.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--crash-shell</option></term>
+
+        <listitem><para>Run a shell on crash. This switch has no
+        effect when running as user instance. This setting may also be
+        enabled during boot, on the kernel command line via the
+        <varname>systemd.crash_shell=</varname> option, see
+        below.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--crash-reboot</option></term>
+
+        <listitem><para>Automatically reboot the system on crash. This
+        switch has no effect when running as user instance. This
+        setting may also be enabled during boot, on the kernel command
+        line via the <varname>systemd.crash_reboot=</varname> option,
+        see below.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--confirm-spawn</option></term>
+
+        <listitem><para>Ask for confirmation when spawning processes.
+        This switch has no effect when run as user
+        instance.</para></listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--show-status=</option></term>
+
+        <listitem><para>Takes a boolean argument or the special value <constant>auto</constant>. If on, terse unit
+        status information is shown on the console during boot-up and shutdown. If off, no such status information is
+        shown. If set to <constant>auto</constant> behavior is similar to off, except that it is automatically switched
+        to on, as soon as the first unit failure or significant boot delay is encountered. This switch has no effect
+        when invoked as user instance. If specified, overrides both the kernel command line setting
+        <varname>systemd.show_status=</varname> (see below) and the configuration file option
+        <option>ShowStatus=</option>, see
+        <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--log-target=</option></term>
+
+        <listitem><para>Set log target. Argument must be one of
+        <option>console</option>,
+        <option>journal</option>,
+        <option>kmsg</option>,
+        <option>journal-or-kmsg</option>,
+        <option>null</option>.</para></listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--log-level=</option></term>
+
+        <listitem><para>Set log level. As
+        argument this accepts a numerical log
+        level or the well-known <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>
+        symbolic names (lowercase):
+        <option>emerg</option>,
+        <option>alert</option>,
+        <option>crit</option>,
+        <option>err</option>,
+        <option>warning</option>,
+        <option>notice</option>,
+        <option>info</option>,
+        <option>debug</option>.</para></listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--log-color=</option></term>
+
+        <listitem><para>Highlight important log messages. Argument is
+        a boolean value. If the argument is omitted, it defaults to
+        <option>true</option>.</para></listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--log-location=</option></term>
+
+        <listitem><para>Include code location in log messages. This is
+        mostly relevant for debugging purposes. Argument is a boolean
+        value. If the argument is omitted it defaults to
+        <option>true</option>.</para></listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--default-standard-output=</option></term>
+        <term><option>--default-standard-error=</option></term>
+
+        <listitem><para>Sets the default output or error output for
+        all services and sockets, respectively. That is, controls the
+        default for <option>StandardOutput=</option> and
+        <option>StandardError=</option> (see
+        <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+        for details). Takes one of
+        <option>inherit</option>,
+        <option>null</option>,
+        <option>tty</option>,
+        <option>journal</option>,
+        <option>journal+console</option>,
+        <option>syslog</option>,
+        <option>syslog+console</option>,
+        <option>kmsg</option>,
+        <option>kmsg+console</option>.  If the
+        argument is omitted
+        <option>--default-standard-output=</option> defaults to
+        <option>journal</option> and
+        <option>--default-standard-error=</option> to
+        <option>inherit</option>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--machine-id=</option></term>
+
+        <listitem><para>Override the machine-id set on the hard drive,
+        useful for network booting or for containers. May not be set
+        to all zeros.</para></listitem>
+      </varlistentry>
+
+      <xi:include href="standard-options.xml" xpointer="help" />
+      <xi:include href="standard-options.xml" xpointer="version" />
+      else -->
+      <varlistentry>
+        <term><option>-D</option></term>
+        <term><option>--daemon</option></term>
+
+        <listitem><para>Daemonize elogind by double-forking
+        into background.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>-h</option></term>
+        <term><option>--help</option></term>
+
+        <listitem><para>Show the helpt text and exit.</para></listitem>
+      </varlistentry>
+      <!-- // 0 -->
+    </variablelist>
+  </refsect1>
+
+  <!-- 0 /// The whole concpets section is unneeded in elogind
+  <refsect1>
+    <title>Concepts</title>
+
+    <para>systemd provides a dependency system between various
+    entities called "units" of 11 different types. Units encapsulate
+    various objects that are relevant for system boot-up and
+    maintenance. The majority of units are configured in unit
+    configuration files, whose syntax and basic set of options is
+    described in
+    <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+    however some are created automatically from other configuration,
+    dynamically from system state or programmatically at runtime.
+    Units may be "active" (meaning started, bound, plugged in, …,
+    depending on the unit type, see below), or "inactive" (meaning
+    stopped, unbound, unplugged, …), as well as in the process of
+    being activated or deactivated, i.e. between the two states (these
+    states are called "activating", "deactivating"). A special
+    "failed" state is available as well, which is very similar to
+    "inactive" and is entered when the service failed in some way
+    (process returned error code on exit, or crashed, or an operation
+    timed out). If this state is entered, the cause will be logged,
+    for later reference. Note that the various unit types may have a
+    number of additional substates, which are mapped to the five
+    generalized unit states described here.</para>
+
+    <para>The following unit types are available:</para>
+
+    <orderedlist>
+      <listitem><para>Service units, which start and control daemons
+      and the processes they consist of. For details, see
+      <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+      <listitem><para>Socket units, which encapsulate local IPC or
+      network sockets in the system, useful for socket-based
+      activation. For details about socket units, see
+      <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+      for details on socket-based activation and other forms of
+      activation, see
+      <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para></listitem>
+
+      <listitem><para>Target units are useful to group units, or
+      provide well-known synchronization points during boot-up, see
+      <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+      <listitem><para>Device units expose kernel devices in systemd
+      and may be used to implement device-based activation. For
+      details, see
+      <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+      <listitem><para>Mount units control mount points in the file
+      system, for details see
+      <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+      <listitem><para>Automount units provide automount capabilities,
+      for on-demand mounting of file systems as well as parallelized
+      boot-up. See
+      <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+      <listitem><para>Timer units are useful for triggering activation
+      of other units based on timers. You may find details in
+      <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+      <listitem><para>Swap units are very similar to mount units and
+      encapsulate memory swap partitions or files of the operating
+      system. They are described in
+      <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+      <listitem><para>Path units may be used to activate other
+      services when file system objects change or are modified. See
+      <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+      <listitem><para>Slice units may be used to group units which
+      manage system processes (such as service and scope units) in a
+      hierarchical tree for resource management purposes. See
+      <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+      <listitem><para>Scope units are similar to service units, but
+      manage foreign processes instead of starting them as well. See
+      <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>
+
+    </orderedlist>
+
+    <para>Units are named as their configuration files. Some units
+    have special semantics. A detailed list is available in
+    <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para>
+
+    <para>systemd knows various kinds of dependencies, including
+    positive and negative requirement dependencies (i.e.
+    <varname>Requires=</varname> and <varname>Conflicts=</varname>) as
+    well as ordering dependencies (<varname>After=</varname> and
+    <varname>Before=</varname>). NB: ordering and requirement
+    dependencies are orthogonal. If only a requirement dependency
+    exists between two units (e.g. <filename>foo.service</filename>
+    requires <filename>bar.service</filename>), but no ordering
+    dependency (e.g. <filename>foo.service</filename> after
+    <filename>bar.service</filename>) and both are requested to start,
+    they will be started in parallel. It is a common pattern that both
+    requirement and ordering dependencies are placed between two
+    units. Also note that the majority of dependencies are implicitly
+    created and maintained by systemd. In most cases, it should be
+    unnecessary to declare additional dependencies manually, however
+    it is possible to do this.</para>
+
+    <para>Application programs and units (via dependencies) may
+    request state changes of units. In systemd, these requests are
+    encapsulated as 'jobs' and maintained in a job queue. Jobs may
+    succeed or can fail, their execution is ordered based on the
+    ordering dependencies of the units they have been scheduled
+    for.</para>
+
+    <para>On boot systemd activates the target unit
+    <filename>default.target</filename> whose job is to activate
+    on-boot services and other on-boot units by pulling them in via
+    dependencies. Usually, the unit name is just an alias (symlink) for
+    either <filename>graphical.target</filename> (for fully-featured
+    boots into the UI) or <filename>multi-user.target</filename> (for
+    limited console-only boots for use in embedded or server
+    environments, or similar; a subset of graphical.target). However,
+    it is at the discretion of the administrator to configure it as an
+    alias to any other target unit. See
+    <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+    for details about these target units.</para>
+
+    <para>Processes systemd spawns are placed in individual Linux
+    control groups named after the unit which they belong to in the
+    private systemd hierarchy. (see <ulink
+    url="https://www.kernel.org/doc/Documentation/cgroups/cgroups.txt">cgroups.txt</ulink>
+    for more information about control groups, or short "cgroups").
+    systemd uses this to effectively keep track of processes. Control
+    group information is maintained in the kernel, and is accessible
+    via the file system hierarchy (beneath
+    <filename>/sys/fs/cgroup/systemd/</filename>), or in tools such as
+    <citerefentry project='man-pages'><refentrytitle>systemd-cgls</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+    or
+    <citerefentry project='man-pages'><refentrytitle>ps</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+    (<command>ps xawf -eo pid,user,cgroup,args</command> is
+    particularly useful to list all processes and the systemd units
+    they belong to.).</para>
+
+    <para>systemd is compatible with the SysV init system to a large
+    degree: SysV init scripts are supported and simply read as an
+    alternative (though limited) configuration file format. The SysV
+    <filename>/dev/initctl</filename> interface is provided, and
+    compatibility implementations of the various SysV client tools are
+    available. In addition to that, various established Unix
+    functionality such as <filename>/etc/fstab</filename> or the
+    <filename>utmp</filename> database are supported.</para>
+
+    <para>systemd has a minimal transaction system: if a unit is
+    requested to start up or shut down it will add it and all its
+    dependencies to a temporary transaction. Then, it will verify if
+    the transaction is consistent (i.e. whether the ordering of all
+    units is cycle-free). If it is not, systemd will try to fix it up,
+    and removes non-essential jobs from the transaction that might
+    remove the loop. Also, systemd tries to suppress non-essential
+    jobs in the transaction that would stop a running service. Finally
+    it is checked whether the jobs of the transaction contradict jobs
+    that have already been queued, and optionally the transaction is
+    aborted then. If all worked out and the transaction is consistent
+    and minimized in its impact it is merged with all already
+    outstanding jobs and added to the run queue. Effectively this
+    means that before executing a requested operation, systemd will
+    verify that it makes sense, fixing it if possible, and only
+    failing if it really cannot work.</para>
+
+    <para>Systemd contains native implementations of various tasks
+    that need to be executed as part of the boot process. For example,
+    it sets the hostname or configures the loopback network device. It
+    also sets up and mounts various API file systems, such as
+    <filename>/sys</filename> or <filename>/proc</filename>.</para>
+
+    <para>For more information about the concepts and
+    ideas behind systemd, please refer to the
+    <ulink url="http://0pointer.de/blog/projects/systemd.html">Original Design Document</ulink>.</para>
+
+    <para>Note that some but not all interfaces provided
+    by systemd are covered by the
+    <ulink url="https://www.freedesktop.org/wiki/Software/systemd/InterfaceStabilityPromise">Interface
+    Stability Promise</ulink>.</para>
+
+    <para>Units may be generated dynamically at boot and system
+    manager reload time, for example based on other configuration
+    files or parameters passed on the kernel command line. For details, see
+    <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para>
+
+    <para>Systems which invoke systemd in a container or initrd
+    environment should implement the
+    <ulink url="https://www.freedesktop.org/wiki/Software/systemd/ContainerInterface">Container Interface</ulink> or
+    <ulink url="https://www.freedesktop.org/wiki/Software/systemd/InitrdInterface">initrd Interface</ulink>
+    specifications, respectively.</para>
+  </refsect1>
+  // 0 -->
+
+  <!-- 0 /// The whole directories section is unneeded in elogind
+  <refsect1>
+    <title>Directories</title>
+
+    <variablelist>
+      <varlistentry>
+        <term>System unit directories</term>
+
+        <listitem><para>The systemd system manager reads unit
+        configuration from various directories. Packages that want to
+        install unit files shall place them in the directory returned
+        by <command>pkg-config systemd
+        --variable=systemdsystemunitdir</command>. Other directories
+        checked are <filename>/usr/local/lib/systemd/system</filename>
+        and <filename>/usr/lib/systemd/system</filename>. User
+        configuration always takes precedence. <command>pkg-config
+        systemd --variable=systemdsystemconfdir</command> returns the
+        path of the system configuration directory. Packages should
+        alter the content of these directories only with the
+        <command>enable</command> and <command>disable</command>
+        commands of the
+        <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+        tool. Full list of directories is provided in
+        <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+        </para></listitem>
+      </varlistentry>
+    </variablelist>
+
+    <variablelist>
+      <varlistentry>
+        <term>User unit directories</term>
+
+        <listitem><para>Similar rules apply for the user unit
+        directories. However, here the
+        <ulink url="http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html">XDG
+        Base Directory specification</ulink> is followed to find
+        units. Applications should place their unit files in the
+        directory returned by <command>pkg-config systemd
+        --variable=systemduserunitdir</command>. Global configuration
+        is done in the directory reported by <command>pkg-config
+        systemd --variable=systemduserconfdir</command>. The
+        <command>enable</command> and <command>disable</command>
+        commands of the
+        <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+        tool can handle both global (i.e. for all users) and private
+        (for one user) enabling/disabling of units. Full list of
+        directories is provided in
+        <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+        </para></listitem>
+      </varlistentry>
+    </variablelist>
+
+    <variablelist>
+      <varlistentry>
+        <term>SysV init scripts directory</term>
+
+        <listitem><para>The location of the SysV init script directory
+        varies between distributions. If systemd cannot find a native
+        unit file for a requested service, it will look for a SysV
+        init script of the same name (with the
+        <filename>.service</filename> suffix
+        removed).</para></listitem>
+      </varlistentry>
+    </variablelist>
+
+    <variablelist>
+      <varlistentry>
+        <term>SysV runlevel link farm directory</term>
+
+        <listitem><para>The location of the SysV runlevel link farm
+        directory varies between distributions. systemd will take the
+        link farm into account when figuring out whether a service
+        shall be enabled. Note that a service unit with a native unit
+        configuration file cannot be started by activating it in the
+        SysV runlevel link farm.</para></listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+  // 0 -->
+
+  <!-- 0 /// The whole Signals section is unneeded in elogind
+  <refsect1>
+    <title>Signals</title>
+
+    <variablelist>
+      <varlistentry>
+        <term><constant>SIGTERM</constant></term>
+
+        <listitem><para>Upon receiving this signal the systemd system
+        manager serializes its state, reexecutes itself and
+        deserializes the saved state again. This is mostly equivalent
+        to <command>systemctl daemon-reexec</command>.</para>
+
+        <para>systemd user managers will start the
+        <filename>exit.target</filename> unit when this signal is
+        received. This is mostly equivalent to <command>systemctl
+        --user start exit.target
+        --job-mode=replace-irreversible</command>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGINT</constant></term>
+
+        <listitem><para>Upon receiving this signal the systemd system
+        manager will start the
+        <filename>ctrl-alt-del.target</filename> unit. This is mostly
+        equivalent to <command>systemctl start ctl-alt-del.target
+        --job-mode=replace-irreversible</command>. If this signal is
+        received more than 7 times per 2s, an immediate reboot is
+        triggered.  Note that pressing Ctrl-Alt-Del on the console
+        will trigger this signal. Hence, if a reboot is hanging,
+        pressing Ctrl-Alt-Del more than 7 times in 2s is a relatively
+        safe way to trigger an immediate reboot.</para>
+
+        <para>systemd user managers treat this signal the same way as
+        <constant>SIGTERM</constant>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGWINCH</constant></term>
+
+        <listitem><para>When this signal is received the systemd
+        system manager will start the
+        <filename>kbrequest.target</filename> unit. This is mostly
+        equivalent to <command>systemctl start
+        kbrequest.target</command>.</para>
+
+        <para>This signal is ignored by systemd user
+        managers.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGPWR</constant></term>
+
+        <listitem><para>When this signal is received the systemd
+        manager will start the <filename>sigpwr.target</filename>
+        unit. This is mostly equivalent to <command>systemctl start
+        sigpwr.target</command>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGUSR1</constant></term>
+
+        <listitem><para>When this signal is received the systemd
+        manager will try to reconnect to the D-Bus
+        bus.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGUSR2</constant></term>
+
+        <listitem><para>When this signal is received the systemd
+        manager will log its complete state in human-readable form.
+        The data logged is the same as printed by
+        <command>systemd-analyze dump</command>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGHUP</constant></term>
+
+        <listitem><para>Reloads the complete daemon configuration.
+        This is mostly equivalent to <command>systemctl
+        daemon-reload</command>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+0</constant></term>
+
+        <listitem><para>Enters default mode, starts the
+        <filename>default.target</filename> unit. This is mostly
+        equivalent to <command>systemctl isolate
+        default.target</command>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+1</constant></term>
+
+        <listitem><para>Enters rescue mode, starts the
+        <filename>rescue.target</filename> unit. This is mostly
+        equivalent to <command>systemctl isolate
+        rescue.target</command>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+2</constant></term>
+
+        <listitem><para>Enters emergency mode, starts the
+        <filename>emergency.service</filename> unit. This is mostly
+        equivalent to <command>systemctl isolate
+        emergency.service</command>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+3</constant></term>
+
+        <listitem><para>Halts the machine, starts the
+        <filename>halt.target</filename> unit. This is mostly
+        equivalent to <command>systemctl start halt.target
+        --job-mode=replace-irreversible</command>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+4</constant></term>
+
+        <listitem><para>Powers off the machine, starts the
+        <filename>poweroff.target</filename> unit. This is mostly
+        equivalent to <command>systemctl start poweroff.target
+        --job-mode=replace-irreversible</command>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+5</constant></term>
+
+        <listitem><para>Reboots the machine, starts the
+        <filename>reboot.target</filename> unit. This is mostly
+        equivalent to <command>systemctl start reboot.target
+        --job-mode=replace-irreversible</command>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+6</constant></term>
+
+        <listitem><para>Reboots the machine via kexec, starts the
+        <filename>kexec.target</filename> unit. This is mostly
+        equivalent to <command>systemctl start kexec.target
+        --job-mode=replace-irreversible</command>.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+13</constant></term>
+
+        <listitem><para>Immediately halts the machine.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+14</constant></term>
+
+        <listitem><para>Immediately powers off the machine.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+15</constant></term>
+
+        <listitem><para>Immediately reboots the machine.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+16</constant></term>
+
+        <listitem><para>Immediately reboots the machine with kexec.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+20</constant></term>
+
+        <listitem><para>Enables display of status messages on the
+        console, as controlled via
+        <varname>systemd.show_status=1</varname> on the kernel command
+        line.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+21</constant></term>
+
+        <listitem><para>Disables display of
+        status messages on the console, as
+        controlled via
+        <varname>systemd.show_status=0</varname>
+        on the kernel command
+        line.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+22</constant></term>
+        <term><constant>SIGRTMIN+23</constant></term>
+
+        <listitem><para>Sets the log level to <literal>debug</literal>
+        (or <literal>info</literal> on
+        <constant>SIGRTMIN+23</constant>), as controlled via
+        <varname>systemd.log_level=debug</varname> (or
+        <varname>systemd.log_level=info</varname> on
+        <constant>SIGRTMIN+23</constant>) on the kernel command
+        line.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+24</constant></term>
+
+        <listitem><para>Immediately exits the manager (only available
+        for --user instances).</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><constant>SIGRTMIN+26</constant></term>
+        <term><constant>SIGRTMIN+27</constant></term>
+        <term><constant>SIGRTMIN+28</constant></term>
+
+        <listitem><para>Sets the log target to
+        <literal>journal-or-kmsg</literal> (or
+        <literal>console</literal> on
+        <constant>SIGRTMIN+27</constant>, <literal>kmsg</literal> on
+        <constant>SIGRTMIN+28</constant>), as controlled via
+        <varname>systemd.log_target=journal-or-kmsg</varname> (or
+        <varname>systemd.log_target=console</varname> on
+        <constant>SIGRTMIN+27</constant> or
+        <varname>systemd.log_target=kmsg</varname> on
+        <constant>SIGRTMIN+28</constant>) on the kernel command
+        line.</para></listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+  // 0 -->
+
+  <!-- 0 /// The whole environment section is unneeded in elogind 
+  <refsect1>
+    <title>Environment</title>
+
+    <variablelist class='environment-variables'>
+      <varlistentry>
+        <term><varname>$SYSTEMD_LOG_LEVEL</varname></term>
+        <listitem><para>systemd reads the log level from this
+        environment variable. This can be overridden with
+        <option>--log-level=</option>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>$SYSTEMD_LOG_TARGET</varname></term>
+        <listitem><para>systemd reads the log target from this
+        environment variable. This can be overridden with
+        <option>--log-target=</option>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>$SYSTEMD_LOG_COLOR</varname></term>
+        <listitem><para>Controls whether systemd highlights important
+        log messages. This can be overridden with
+        <option>--log-color=</option>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>$SYSTEMD_LOG_LOCATION</varname></term>
+        <listitem><para>Controls whether systemd prints the code
+        location along with log messages. This can be overridden with
+        <option>--log-location=</option>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>$XDG_CONFIG_HOME</varname></term>
+        <term><varname>$XDG_CONFIG_DIRS</varname></term>
+        <term><varname>$XDG_DATA_HOME</varname></term>
+        <term><varname>$XDG_DATA_DIRS</varname></term>
+
+        <listitem><para>The systemd user manager uses these variables
+        in accordance to the <ulink
+        url="http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html">XDG
+        Base Directory specification</ulink> to find its
+        configuration.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>$SYSTEMD_UNIT_PATH</varname></term>
+
+        <listitem><para>Controls where systemd looks for unit
+        files.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>$SYSTEMD_SYSVINIT_PATH</varname></term>
+
+        <listitem><para>Controls where systemd looks for SysV init
+        scripts.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>$SYSTEMD_SYSVRCND_PATH</varname></term>
+
+        <listitem><para>Controls where systemd looks for SysV init
+        script runlevel link farms.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>$SYSTEMD_COLORS</varname></term>
+
+        <listitem><para>The value must be a boolean. Controls whether colorized output should be
+        generated. This can be specified to override the decision that <command>systemd</command>
+        makes based on <varname>$TERM</varname> and what the console is connected to.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>$LISTEN_PID</varname></term>
+        <term><varname>$LISTEN_FDS</varname></term>
+        <term><varname>$LISTEN_FDNAMES</varname></term>
+
+        <listitem><para>Set by systemd for supervised processes during
+        socket-based activation. See
+        <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>
+        for more information.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>$NOTIFY_SOCKET</varname></term>
+
+        <listitem><para>Set by systemd for supervised processes for
+        status and start-up completion notification. See
+        <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>
+        for more information.</para></listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+  // 0 -->
+
+  <!-- 0 /// The whole kernel section is unneeded in elogind
+  <refsect1>
+    <title>Kernel Command Line</title>
+
+    <para>When run as system instance systemd parses a number of
+    kernel command line arguments<footnote><para>If run inside a Linux
+    container these arguments may be passed as command line arguments
+    to systemd itself, next to any of the command line options listed
+    in the Options section above. If run outside of Linux containers,
+    these arguments are parsed from <filename>/proc/cmdline</filename>
+    instead.</para></footnote>:</para>
+
+    <variablelist class='kernel-commandline-options'>
+      <varlistentry>
+        <term><varname>systemd.unit=</varname></term>
+        <term><varname>rd.systemd.unit=</varname></term>
+
+        <listitem><para>Overrides the unit to activate on boot.
+        Defaults to <filename>default.target</filename>. This may be
+        used to temporarily boot into a different boot unit, for
+        example <filename>rescue.target</filename> or
+        <filename>emergency.service</filename>. See
+        <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+        for details about these units. The option prefixed with
+        <literal>rd.</literal> is honored only in the initial RAM disk
+        (initrd), while the one that is not prefixed only in the main
+        system.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.dump_core</varname></term>
+
+        <listitem><para>Takes a boolean argument or enables the option if specified
+        without an argument. If enabled, the systemd manager (PID 1) dumps core when
+        it crashes. Otherwise, no core dump is created. Defaults to enabled.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.crash_chvt</varname></term>
+
+        <listitem><para>Takes a positive integer, or a boolean argument. Can be also
+        specified without an argument, with the same effect as a positive boolean. If
+        a positive integer (in the range 1–63) is specified, the system manager (PID
+        1) will activate the specified virtual terminal (VT) when it
+        crashes. Defaults to disabled, meaning that no such switch is attempted. If
+        set to enabled, the VT the kernel messages are written to is selected.
+        </para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.crash_shell</varname></term>
+
+        <listitem><para>Takes a boolean argument or enables the option if specified
+        without an argument. If enabled, the system manager (PID 1) spawns a shell
+        when it crashes, after a 10s delay. Otherwise, no shell is spawned. Defaults
+        to disabled, for security reasons, as the shell is not protected by password
+        authentication.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.crash_reboot</varname></term>
+
+        <listitem><para>Takes a boolean argument or enables the option if specified
+        without an argument. If enabled, the system manager (PID 1) will reboot the
+        machine automatically when it crashes, after a 10s delay.  Otherwise, the
+        system will hang indefinitely. Defaults to disabled, in order to avoid a
+        reboot loop. If combined with <varname>systemd.crash_shell</varname>, the
+        system is rebooted after the shell exits.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.confirm_spawn</varname></term>
+
+        <listitem><para>Takes a boolean argument or a path to the virtual console
+        where the confirmation messages should be emitted. Can be also specified
+        without an argument, with the same effect as a positive boolean. If enabled,
+        the system manager (PID 1) asks for confirmation when spawning processes
+        using <option>/dev/console</option>. If a path or a console name (such as
+        <literal>ttyS0</literal>) is provided, the virtual console pointed to by this
+        path or described by the give name will be used instead. Defaults to disabled.
+        </para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.show_status</varname></term>
+
+        <listitem><para>Takes a boolean argument or the constant
+        <constant>auto</constant>. Can be also specified without an argument, with
+        the same effect as a positive boolean.  If enabled, the systemd manager (PID
+        1) shows terse service status updates on the console during bootup.
+        <constant>auto</constant> behaves like <option>false</option> until a unit
+        fails or there is a significant delay in boot. Defaults to enabled, unless
+        <option>quiet</option> is passed as kernel command line option, in which case
+        it defaults to <constant>auto</constant>. If specified overrides the system
+        manager configuration file option <option>ShowStatus=</option>, see
+        <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+        However, the process command line option <option>--show-status=</option>
+        takes precedence over both this kernel command line option and the
+        configuration file option.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.log_target=</varname></term>
+        <term><varname>systemd.log_level=</varname></term>
+        <term><varname>systemd.log_location=</varname></term>
+        <term><varname>systemd.log_color</varname></term>
+
+        <listitem><para>Controls log output, with the same effect as the
+        <varname>$SYSTEMD_LOG_TARGET</varname>,
+        <varname>$SYSTEMD_LOG_LEVEL</varname>,
+        <varname>$SYSTEMD_LOG_LOCATION</varname>,
+        <varname>$SYSTEMD_LOG_COLOR</varname> environment variables described above.
+        <varname>systemd.log_color</varname> can be specified without an argument,
+        with the same effect as a positive boolean.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.default_standard_output=</varname></term>
+        <term><varname>systemd.default_standard_error=</varname></term>
+        <listitem><para>Controls default standard output and error
+        output for services, with the same effect as the
+        <option>--default-standard-output=</option> and
+        <option>--default-standard-error=</option> command line
+        arguments described above, respectively.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.setenv=</varname></term>
+
+        <listitem><para>Takes a string argument in the form
+        VARIABLE=VALUE. May be used to set default environment
+        variables to add to forked child processes. May be used more
+        than once to set multiple variables.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.machine_id=</varname></term>
+
+        <listitem><para>Takes a 32 character hex value to be
+        used for setting the machine-id. Intended mostly for
+        network booting where the same machine-id is desired
+        for every boot.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.unified_cgroup_hierarchy</varname></term>
+
+        <listitem><para>When specified without an argument or with a true argument,
+        enables the usage of
+        <ulink url="https://www.kernel.org/doc/Documentation/cgroup-v2.txt">unified cgroup hierarchy</ulink>
+        (a.k.a. cgroups-v2). When specified with a false argument, fall back to
+        hybrid or full legacy cgroup hierarchy.</para>
+
+        <para>If this option is not specified, the default behaviour is determined
+        during compilation (the <option>--with-default-hierarchy=</option>
+        option). If the kernel does not support unified cgroup hierarchy, the legacy
+        hierarchy will be used even if this option is specified.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>systemd.legacy_systemd_cgroup_controller</varname></term>
+
+        <listitem><para>Takes effect if the full unified cgroup hierarchy is not used
+        (see previous option). When specified without an argument or with a true
+        argument, disables the use of "hybrid" cgroup hierarchy (i.e. a cgroups-v2
+        tree used for systemd, and
+        <ulink url="https://www.kernel.org/doc/Documentation/cgroup-v1/">legacy
+        cgroup hierarchy</ulink>, a.k.a. cgroups-v1, for other controllers), and
+        forces a full "legacy" mode. When specified with a false argument, enables
+        the use of "hybrid" hierarchy.</para>
+
+        <para>If this option is not specified, the default behaviour is determined
+        during compilation (the <option>--with-default-hierarchy=</option>
+        option). If the kernel does not support unified cgroup hierarchy, the legacy
+        hierarchy will be used  even if this option is specified.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>quiet</varname></term>
+
+        <listitem><para>Turn off status output at boot, much like
+        <varname>systemd.show_status=false</varname> would. Note that
+        this option is also read by the kernel itself and disables
+        kernel log output. Passing this option hence turns off the
+        usual output from both the system manager and the kernel.
+        </para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>debug</varname></term>
+
+        <listitem><para>Turn on debugging output. This is equivalent
+        to <varname>systemd.log_level=debug</varname>. Note that this
+        option is also read by the kernel itself and enables kernel
+        debug output. Passing this option hence turns on the debug
+        output from both the system manager and the
+        kernel.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>emergency</varname></term>
+        <term><varname>rd.emergency</varname></term>
+        <term><varname>-b</varname></term>
+
+        <listitem><para>Boot into emergency mode. This is equivalent
+        to <varname>systemd.unit=emergency.target</varname> or
+        <varname>rd.systemd.unit=emergency.target</varname>, respectively, and
+        provided for compatibility reasons and to be easier to type.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>rescue</varname></term>
+        <term><varname>rd.rescue</varname></term>
+        <term><varname>single</varname></term>
+        <term><varname>s</varname></term>
+        <term><varname>S</varname></term>
+        <term><varname>1</varname></term>
+
+        <listitem><para>Boot into rescue mode. This is equivalent to
+        <varname>systemd.unit=rescue.target</varname> or
+        <varname>rd.systemd.unit=rescue.target</varname>, respectively, and
+        provided for compatibility reasons and to be easier to type.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>2</varname></term>
+        <term><varname>3</varname></term>
+        <term><varname>4</varname></term>
+        <term><varname>5</varname></term>
+
+        <listitem><para>Boot into the specified legacy SysV runlevel.
+        These are equivalent to
+        <varname>systemd.unit=runlevel2.target</varname>,
+        <varname>systemd.unit=runlevel3.target</varname>,
+        <varname>systemd.unit=runlevel4.target</varname>, and
+        <varname>systemd.unit=runlevel5.target</varname>,
+        respectively, and provided for compatibility reasons and to be
+        easier to type.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><varname>locale.LANG=</varname></term>
+        <term><varname>locale.LANGUAGE=</varname></term>
+        <term><varname>locale.LC_CTYPE=</varname></term>
+        <term><varname>locale.LC_NUMERIC=</varname></term>
+        <term><varname>locale.LC_TIME=</varname></term>
+        <term><varname>locale.LC_COLLATE=</varname></term>
+        <term><varname>locale.LC_MONETARY=</varname></term>
+        <term><varname>locale.LC_MESSAGES=</varname></term>
+        <term><varname>locale.LC_PAPER=</varname></term>
+        <term><varname>locale.LC_NAME=</varname></term>
+        <term><varname>locale.LC_ADDRESS=</varname></term>
+        <term><varname>locale.LC_TELEPHONE=</varname></term>
+        <term><varname>locale.LC_MEASUREMENT=</varname></term>
+        <term><varname>locale.LC_IDENTIFICATION=</varname></term>
+
+        <listitem><para>Set the system locale to use. This overrides
+        the settings in <filename>/etc/locale.conf</filename>. For
+        more information, see
+        <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+        and
+        <citerefentry project='man-pages'><refentrytitle>locale</refentrytitle><manvolnum>7</manvolnum></citerefentry>.
+        </para></listitem>
+      </varlistentry>
+    </variablelist>
+
+    <para>For other kernel command line parameters understood by
+    components of the core OS, please refer to
+    <citerefentry><refentrytitle>kernel-command-line</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para>
+  </refsect1>
+  // 0 -->
+
+  <!-- 0 /// The whole sockets section is unneeded in elogind
+  <refsect1>
+    <title>Sockets and FIFOs</title>
+
+    <variablelist>
+      <varlistentry>
+        <term><filename>/run/systemd/notify</filename></term>
+
+        <listitem><para>Daemon status notification socket. This is an
+        <constant>AF_UNIX</constant> datagram socket and is used to
+        implement the daemon notification logic as implemented by
+        <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem>
+
+      </varlistentry>
+
+      <varlistentry>
+        <term><filename>/run/systemd/private</filename></term>
+
+        <listitem><para>Used internally as communication channel
+        between
+        <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+        and the systemd process. This is an
+        <constant>AF_UNIX</constant> stream socket. This interface is
+        private to systemd and should not be used in external
+        projects.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><filename>/dev/initctl</filename></term>
+
+        <listitem><para>Limited compatibility support for the SysV
+        client interface, as implemented by the
+        <filename>systemd-initctl.service</filename> unit. This is a
+        named pipe in the file system. This interface is obsolete and
+        should not be used in new applications.</para></listitem>
+      </varlistentry>
+    </variablelist>
   </refsect1>
+  // 0 -->
 
   <refsect1>
     <title>See Also</title>
     <para>
+      <!-- 0 /// elogind does not have that much to see also...
+      The <ulink url="https://www.freedesktop.org/wiki/Software/systemd/">systemd Homepage</ulink>,
+      <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+      <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>systemd-notify</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+      <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>kernel-command-line</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+      <citerefentry project='man-pages'><refentrytitle>bootup</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+      else -->
+      The <ulink url="https://github.com/elogind/elogind/">elogind Homepage</ulink>,
       <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
       <citerefentry><refentrytitle>pam_elogind</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+      <!-- // 0 -->
     </para>
   </refsect1>