| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PID 1 to journald
And let's make use of it to implement two new unit settings with it:
1. LogLevelMax= is a new per-unit setting that may be used to configure
log priority filtering: set it to LogLevelMax=notice and only
messages of level "notice" and lower (i.e. more important) will be
processed, all others are dropped.
2. LogExtraFields= is a new per-unit setting for configuring per-unit
journal fields, that are implicitly included in every log record
generated by the unit's processes. It takes field/value pairs in the
form of FOO=BAR.
Also, related to this, one exisiting unit setting is ported to this new
facility:
3. The invocation ID is now pulled from /run/elogind/units/ instead of
cgroupfs xattrs. This substantially relaxes requirements of elogind
on the kernel version and the privileges it runs with (specifically,
cgroupfs xattrs are not available in containers, since they are
stored in kernel memory, and hence are unsafe to permit to lesser
privileged code).
/run/elogind/units/ is a new directory, which contains a number of files
and symlinks encoding the above information. PID 1 creates and manages
these files, and journald reads them from there.
Note that this is supposed to be a direct path between PID 1 and the
journal only, due to the special runtime environment the journal runs
in. Normally, today we shouldn't introduce new interfaces that (mis-)use
a file system as IPC framework, and instead just an IPC system, but this
is very hard to do between the journal and PID 1, as long as the IPC
system is a subject PID 1 manages, and itself a client to the journal.
This patch cleans up a couple of types used in journal code:
specifically we switch to size_t for a couple of memory-sizing values,
as size_t is the right choice for everything that is memory.
Fixes: #4089
Fixes: #3041
Fixes: #4441
|
| | |
|
| |
|
|
|
|
| |
This we can then make use in execute.c to make error logging a bit less
special when preparing for process execution, as we can still log but
don't have any fds open continously.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This adds a new recognizable log message for each unit invocation that
contains structured information about consumed resources of the unit as
a whole after it terminated. This is particular useful for apps that
want to figure out what the resource consumption of a unit given a
specific invocation ID was.
The log message is only generated for units that have at least one
XyzAccounting= property turned on, and currently only covers IP traffic and CPU
time metrics.
|
| | |
|
| |
|
|
| |
(#6326)
|
| |
|
|
|
|
|
|
|
|
| |
This is useful when we want to avoid printf formatting on the message.
It's nicer than using log_struct with "%s" as the format, because printf
is slow and with a large message (like from a backtrace) this would require
extra unnecessary memory.
I'm not exposing all the fields in the wrapper: only level and errno.
Those are the most likely to be useful.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
log_struct takes multiple format strings, each one followed by arguments.
The _printf_ annotation is not sufficiently flexible to express this,
but we can still annotate the first format string, though not its
arguments (because their number is unknown).
With the annotation, the places which specified the message id or similar
as the first pattern cause a warning from -Wformat-nonliteral. This can
be trivially fixed by putting the MESSAGE= first.
This change will help find issues where a non-literal is erroneously used
as the pattern.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Fixup for 4b58153dd22172d817055d2a09a0cdf3f4bd9db3.
I saw this because of a clang warning. With gcc the -Wformat-nonliteral warning
doesn't seem to work as expected.
In two places, a string constructed with strjoina is used as the pattern. This
is safe, because we're taking a pattern which was already marked with _printf_
and prepending a known value to it. Those places are marked with #pragma to
silence the warning.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The single log level is split into an array of log levels. Which index in the
array is used can be determined for each compilation unit separately by setting
a macro before including log.h. All compilation units use the same index
(LOG_REALM_SYSTEMD), so there should be no functional change.
v2:
- the "realm" is squished into the level (upper bits that are not used by
priority or facility), and unsquished later in functions in log.c.
v3:
- rename REALM_PLUS_LEVEL to LOG_REALM_PLUS_LEVEL and REALM to LOG_REALM_REMOVE_LEVEL.
|
| | |
|
| |
|
|
| |
Fixes: #5401
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Embedding sd_id128_t's in constant strings was rather cumbersome. We had
SD_ID128_CONST_STR which returned a const char[], but it had two problems:
- it wasn't possible to statically concatanate this array with a normal string
- gcc wasn't really able to optimize this, and generated code to perform the
"conversion" at runtime.
Because of this, even our own code in coredumpctl wasn't using
SD_ID128_CONST_STR.
Add a new macro to generate a constant string: SD_ID128_MAKE_STR.
It is not as elegant as SD_ID128_CONST_STR, because it requires a repetition
of the numbers, but in practice it is more convenient to use, and allows gcc
to generate smarter code:
$ size .libs/elogind{,-logind,-journald}{.old,}
text data bss dec hex filename
1265204 149564 4808 1419576 15a938 .libs/elogind.old
1260268 149564 4808 1414640 1595f0 .libs/elogind
246805 13852 209 260866 3fb02 .libs/elogind-logind.old
240973 13852 209 255034 3e43a .libs/elogind-logind
146839 4984 34 151857 25131 .libs/elogind-journald.old
146391 4984 34 151409 24f71 .libs/elogind-journald
It is also much easier to check if a certain binary uses a certain MESSAGE_ID:
$ strings .libs/elogind.old|grep MESSAGE_ID
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
$ strings .libs/elogind|grep MESSAGE_ID
MESSAGE_ID=c7a787079b354eaaa9e77b371893cd27
MESSAGE_ID=b07a249cd024414a82dd00cd181378ff
MESSAGE_ID=641257651c1b4ec9a8624d7a40a9e1e7
MESSAGE_ID=de5b426a63be47a7b6ac3eaac82e2f6f
MESSAGE_ID=d34d037fff1847e6ae669a370e694725
MESSAGE_ID=7d4958e842da4a758f6c1cdc7b36dcc5
MESSAGE_ID=1dee0369c7fc4736b7099b38ecb46ee7
MESSAGE_ID=39f53479d3a045ac8e11786248231fbf
MESSAGE_ID=be02cf6855d2428ba40df7e9d022f03d
MESSAGE_ID=7b05ebc668384222baa8881179cfda54
MESSAGE_ID=9d1aaa27d60140bd96365438aad20286
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds a new invocation ID concept to the service manager. The invocation ID
identifies each runtime cycle of a unit uniquely. A new randomized 128bit ID is
generated each time a unit moves from and inactive to an activating or active
state.
The primary usecase for this concept is to connect the runtime data PID 1
maintains about a service with the offline data the journal stores about it.
Previously we'd use the unit name plus start/stop times, which however is
highly racy since the journal will generally process log data after the service
already ended.
The "invocation ID" kinda matches the "boot ID" concept of the Linux kernel,
except that it applies to an individual unit instead of the whole system.
The invocation ID is passed to the activated processes as environment variable.
It is additionally stored as extended attribute on the cgroup of the unit. The
latter is used by journald to automatically retrieve it for each log logged
message and attach it to the log entry. The environment variable is very easily
accessible, even for unprivileged services. OTOH the extended attribute is only
accessible to privileged processes (this is because cgroupfs only supports the
"trusted." xattr namespace, not "user."). The environment variable may be
altered by services, the extended attribute may not be, hence is the better
choice for the journal.
Note that reading the invocation ID off the extended attribute from journald is
racy, similar to the way reading the unit name for a logging process is.
This patch adds APIs to read the invocation ID to sd-id128:
sd_id128_get_invocation() may be used in a similar fashion to
sd_id128_get_boot().
PID1's own logging is updated to always include the invocation ID when it logs
information about a unit.
A new bus call GetUnitByInvocationID() is added that allows retrieving a bus
path to a unit by its invocation ID. The bus path is built using the invocation
ID, thus providing a path for referring to a unit that is valid only for the
current runtime cycleof it.
Outlook for the future: should the kernel eventually allow passing of cgroup
information along AF_UNIX/SOCK_DGRAM messages via a unique cgroup id, then we
can alter the invocation ID to be generated as hash from that rather than
entirely randomly. This way we can derive the invocation race-freely from the
messages.
|
| | |
|
| | |
|
| |
|
|
|
| |
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The code to format the iovec is shared with log.c. All call sites to
server_driver_message are changed to include the additional "MESSAGE="
part, but the new functionality is not used and change in functionality
is not expected.
iovec is preallocated, so the maximum number of messages is limited.
In server_driver_message N_IOVEC_PAYLOAD_FIELDS is currently set to 1.
New code is not oom safe, it will fail if memory cannot be allocated.
This will be fixed in subsequent commit.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Although it looks very ugly, substitute all declaration masks of the
form:
// UNNEEDED type foo(...);
with:
/// UNNEEDED by elogind
#if 0
type foo(...);
#endif // 0
to make future merging of upstream pathes easier, as the relevant
lines themselves are not changed any more.
|
| |
|
|
|
| |
Apply remaining fixes and the performed move of utility functions
into their own foo-util.[hc] files on libbasic.
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
a) Add some debugging messages to track what's going on with eloginds
cgroup handling.
b) Do not create a cgroup path "/elogind" if our cgroup root is
already "/elogind".
|
| | |
|
|
|
This commit replays the moving around of source files that have been
done between systemd-219 and systemd-221.
Further the Makefile.am is synchronized with the upstream version and
then "re-cleaned".
A lot of functions, that are not used anywhere in elogind have been
coated into #if 0/#endif directives to further shorten the list of
dependencies.
All unneeded files have been removed.
|
