systemd.exec systemd Developer Lennart Poettering lennart@poettering.net systemd.exec 5 systemd.exec systemd execution environment configuration systemd.service, systemd.socket, systemd.mount Description Unit configuration files for services, sockets and mount points share a subset of configuration options which define the execution environment of spawned processes. This man page lists the configuration options shared by these three unit types. See systemd.unit5 for the common options of all unit configuration files, and systemd.service5, systemd.socket5 and systemd.mount5 for more information on the specific unit configuration files. The execution specific configuration options are configured in the [Service], [Socket] resp. [Mount] section, depending on the unit type. Options WorkingDirectory= Takes an absolute directory path. Sets the working directory for executed processes. RootDirectory= Takes an absolute directory path. Sets the root directory for executed processes, with the chroot2 system call. If this is used it must be ensured that the process and all its auxiliary files are available in the chroot() jail. User= Group= Sets the Unix user resp. group the processes are executed as. Takes a single user resp. group name or ID as argument. If no group is set the default group of the user is chosen. SupplementaryGroups= Sets the supplementary Unix groups the processes are executed as. This takes a space separated list of group names or IDs. This option may be specified more than once in which case all listed groups are set as supplementary groups. This option does not override but extend the list of supplementary groups configured in the system group database for the user. Nice= Sets the default nice level (scheduling priority) for executed processes. Takes an integer between -20 (highest priority) and 19 (lowest priority). See setpriority2 for details. OOMScoreAdjust= Sets the adjustment level for the Out-Of-Memory killer for executed processes. Takes an integer between -1000 (to disable OOM killing for this process) and 1000 (to make killing of this process under memory pressure very likely). See proc.txt for details. IOSchedulingClass= Sets the IO scheduling class for executed processes. Takes an integer between 0 and 3 or one of the strings , , or . See ioprio_set2 for details. IOSchedulingPriority= Sets the IO scheduling priority for executed processes. Takes an integer between 0 (highest priority) and 7 (lowest priority). The available priorities depend on the selected IO scheduling class (see above). See ioprio_set2 for details. CPUSchedulingPolicy= Sets the CPU scheduling policy for executed processes. Takes one of , , , or . See sched_setscheduler2 for details. CPUSchedulingPriority= Sets the CPU scheduling priority for executed processes. Takes an integer between 1 (lowest priority) and 99 (highest priority). The available priority range depends on the selected CPU scheduling policy (see above). See sched_setscheduler2 for details. CPUSchedulingResetOnFork= Takes a boolean argument. If true elevated CPU scheduling priorities and policies will be reset when the executed processes fork, and can hence not leak into child processes. See sched_setscheduler2 for details. Defaults to false. CPUAffinity= Controls the CPU affinity of the executed processes. Takes a space-separated list of CPU indexes. See sched_setaffinity2 for details. UMask= Controls the file mode creation mask. Takes an access mode in octal notation. See umask2 for details. Defaults to 0002. Environment= Sets environment variables for executed processes. Takes a space-separated list of variable assignments. This option may be specified more than once in which case all listed variables will be set. If the same variable is set twice the later setting will override the earlier setting. See environ7 for details. EnvironmentFile= Similar to Environment= but reads the environment variables from a text file. The text file should contain new-line separated variable assignments. Empty lines and lines starting with ; or # will be ignored, which may be used for commenting. StandardInput= Controls where file descriptor 0 (STDIN) of the executed processes is connected to. Takes one of , , , or . If is selected standard input will be connected to /dev/null, i.e. all read attempts by the process will result in immediate EOF. If is selected standard input is connected to a TTY (as configured by TTYPath=, see below) and the executed process becomes the controlling process of the terminal. If the terminal is already being controlled by another process it is waited until that process releases the terminal. is similar to , but the executed process is forcefully and immediately made the controlling process of the terminal, potentially removing previous controlling processes from the terminal. is similar to but if the terminal already has a controlling process start-up of the executed process fails. The option is only valid in socket-activated services, and only when the socket configuration file (see systemd.socket5 for details) specifies a single socket only. If this option is set standard input will be connected to the socket the service was activated from, which is primarily useful for compatibility with daemons designed for use with the traditional inetd8 daemon. This setting defaults to . StandardOutput= Controls where file descriptor 1 (STDOUT) of the executed processes is connected to. Takes one of , , , , or . If set to the file descriptor of standard input is duplicated for standard output. If set to standard output will be connected to /dev/null, i.e. everything written to it will be lost. If set to standard output will be connected to a tty (as configured via TTYPath=, see below). If the TTY is used for output only the executed process will not become the controlling process of the terminal, and will not fail or wait for other processes to release the terminal. connects standard output to the syslog3 system logger. connects it with the kernel log buffer which is accessible via dmesg1. connects standard output to a socket from socket activation, semantics are similar to the respective option of StandardInput=. This setting defaults to . StandardError= Controls where file descriptor 2 (STDERR) of the executed processes is connected to. The available options are identical to those of StandardOutput=, whith one exception: if set to the file descriptor used for standard output is duplicated for standard error. This setting defaults to . TTYPath= Sets the terminal device node to use if standard input, output or stderr are connected to a TTY (see above). Defaults to /dev/console. SyslogIdentifer= Sets the process name to prefix log lines sent to syslog or the kernel log buffer with. If not set defaults to the process name of the executed process. This option is only useful when StandardOutput= or StandardError= are set to or . SyslogFacility= Sets the syslog facility to use when logging to syslog. One of , , , , , , , , , , , , , , , , , , or . See syslog3 for details. This option is only useful when StandardOutput= or StandardError= are set to . Defaults to . SyslogLevel= Default syslog level to use when logging to syslog or the kernel log buffer. One of , , , , , , , . See syslog3 for details. This option is only useful when StandardOutput= or StandardError= are set to or . Note that individual lines output by the daemon might be prefixed with a different log level which can be used to override the default log level specified here. The interpretation of these prefixes may be disabled with SyslogLevelPrefix=, see below. For details see sd-daemon7. Defaults to . SyslogLevelPrefix= Takes a boolean argument. If true and StandardOutput= or StandardError= are set to or log lines written by the executed process that are prefixed with a log level will be passed on to syslog with this log level set but the prefix removed. If set to false, the interpretation of these prefixes is disabled and the logged lines are passed on as-is. For details about this prefixing see sd-daemon7. Defaults to true. TimerSlackNSec= Sets the timer slack in nanoseconds for the executed processes The timer slack controls the accuracy of wake-ups triggered by timers. See prctl2 for more information. Note that in contrast to most other time span definitions this value is takes a nano-seconds integer and does not understand any other units. LimitCPU= LimitFSIZE= LimitDATA= LimitSTACK= LimitCORE= LimitRSS= LimitNOFILE= LimitAS= LimitNPROC= LimitMEMLOCK= LimitLOCKS= LimitSIGPENDING= LimitMSGQUEUE= LimitNICE= LimitRTPRIO= LimitRTTIME= These settings control various resource limits for executed processes. See setrlimit2 for details. PAMName= Sets the PAM service name to set up a session as. If set the executed process will be registered as a PAM session under the specified service name. This is only useful in conjunction with the User= setting. If not set no PAM session will be opened for the executed processes. See pam8 for details. TCPWrapName= If this is a socket-activated service this sets the tcpwrap service name to check the permission for the current connection with. This is only useful in conjunction with socket-activated services, and stream sockets (TCP) in particular. It has no effect on other socket types (e.g. datagram/UDP) and on processes unrelated to socket-based activation. If the tcpwrap verification fails daemon start-up will fail and the connection is terminated. See tcpd8 for details. Capabilities= Controls the capabilities7 set for the executed process. Take a capability string as described in cap_from_text3. Note that this capability set is usually influenced by the capabilities attached to the executed file. SecureBits= Controls the secure bits set for the executed process. See capabilities7 for details. Takes a list of strings: , , , , and/or . CapabilityBoundingSetDrop= Controls the capability bounding set drop set for the executed process. See capabilities7 for details. Takes a list of capability names as read by cap_from_name3. ControlGroup= Controls the control groups the executed processes shall be made members of. Takes a space-separated list of cgroup identifiers. A cgroup identifier has a format like cpu:/foo/bar, where "cpu" identifies the kernel control group controller used, and /foo/bar is the control group path. The controller name and ":" may be omitted in which case the named systemd control group hierarchy is implied. Alternatively, the path and ":" may be omitted, in which case the default control group path for this unit is implied. This option may be used to place executed processes in arbitrary groups in arbitrary hierachies -- which can be configured externally with additional execution limits. By default systemd will place all executed processes in separate per-unit control groups (named after the unit) in the systemd named hierarchy. Since every process can be in one group per hierarchy only overriding the control group path in the named systemd hierarchy will disable automatic placement in the default group. For details about control groups see cgroups.txt. ReadWriteDirectories= ReadOnlyDirectories= InaccessibleDirectories= Sets up a new file-system name space for executed processes. These options may be used to limit access a process might have to the main file-system hierarchy. Each setting takes a space-separated list of absolute directory paths. Directories listed in ReadWriteDirectories= are accessible from within the namespace with the same access rights as from outside. Directories listed in ReadOnlyDirectories= are accessible for reading only, writing will be refused even if the usual file access controls would permit this. Directories listed in InaccessibleDirectories= will be made inaccesible for processes inside the namespace. Note that restricting access with these options does not extend to submounts of a directory. You must list submounts separately in these setttings to ensure the same limited access. These options may be specified more than once in which case all directories listed will have limited access from within the namespace. PrivateTmp= Takes a boolean argument. If true sets up a new namespace for the executed processes and mounts a private /tmp directory inside it, that is not shared by processes outside of the namespace. This is useful to secure access to temporary files of the process, but makes sharing between processes via /tmp impossible. Defaults to false. MountFlags= Takes a mount propagation flag: , or , which control whether namespaces set up with ReadWriteDirectories=, ReadOnlyDirectories= and InaccessibleDirectories= receive or propagate new mounts from/to the main namespace. See mount1 for details. Defaults to , i.e. the new namespace will both receive new mount points from the main namespace as well as propagate new mounts to it. See Also systemd1, systemctl8, systemd.unit5, systemd.service5, systemd.socket5, systemd.mount5