Imported Upstream version 2.5.31

1 files changed, 980 insertions, 216 deletions

diff --git a/Makefile.in b/Makefile.in
index c414220..081f9b0 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,7 +1,42 @@
-# @(#) $Header: /home/daffy/u0/vern/flex/RCS/Makefile.in,v 1.45 96/09/10 16:59:04 vern Exp $ (LBL)
+# Makefile.in generated by automake 1.7 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
 
 @SET_MAKE@
 
+# This file is part of flex.
+
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+
+# Neither the name of the University nor the names of its contributors
+# may be used to endorse or promote products derived from this software
+# without specific prior written permission.
+
+# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE.
+
+# Notes on building:
+
 # Possible values for DEFS:
 #
 # By default, flex generates 8-bit scanners when using table compression,
@@ -14,249 +49,978 @@
 # For MS-DOS, add "-DMS_DOS" to DEFS.  See the directory MISC/MSDOS for
 # additional info.
 
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BISON = @BISON@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
+CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
-LDFLAGS = 
-LIBS = @LIBS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GMSGFMT = @GMSGFMT@
+HELP2MAN = @HELP2MAN@
+INDENT = @INDENT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBS = @LIBINTL@ @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+M4 = @M4@
+MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
 
-# Installation targeting.  Files will be installed under the tree
-# rooted at prefix.  flex will be installed in bindir, libfl.a in
-# libdir, FlexLexer.h will be installed in includedir, and the manual
-# pages will be installed in mandir with extension manext.
-# 
-# Raw, unformatted troff source will be installed if INSTALLMAN=man,
-# nroff preformatted versions will be installed if INSTALLMAN=cat.
+AM_YFLAGS = -d
+ACLOCAL_AMFLAGS = -I m4
+m4 = @M4@
+indent = @INDENT@
 
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-includedir = $(prefix)/include
-manext = 1
-mandir = $(prefix)/man/man$(manext)
+AUTOMAKE_OPTIONS = \
+	gnits \
+	check-news \
+	dist-bzip2 \
+	1.7
 
-# You can define these to be "lex" and "libl.a" if you want to replace
-# lex at your site.
-FLEX = flex
-FLEXLIB = libfl.a
 
-INSTALLMAN = man
+bin_PROGRAMS = flex
+lib_LIBRARIES = libfl.a
 
-SHELL = /bin/sh
-srcdir = @srcdir@
-VPATH = @srcdir@
+flex_SOURCES = \
+	ccl.c \
+	dfa.c \
+	ecs.c \
+	gen.c \
+	main.c \
+	misc.c \
+	nfa.c \
+	parse.y \
+	scan.l \
+	skel.c \
+	sym.c \
+	tblcmp.c \
+	yylex.c \
+	options.c \
+	scanopt.c \
+	buf.c \
+	tables.c \
+	tables_shared.c \
+	filter.c \
+	regex.c
+
+
+libfl_a_SOURCES = \
+	libmain.c \
+	libyywrap.c
+
+
+noinst_HEADERS = \
+	flexdef.h \
+	flexint.h \
+	version.h \
+	options.h \
+	scanopt.h \
+	tables.h \
+	tables_shared.h
+
+
+include_HEADERS = \
+	FlexLexer.h
+
+
+MAINTAINERCLEANFILES = \
+	ABOUT-NLS \
+	config.rpath \
+	config.sub \
+	config.guess \
+	configure \
+	config.sub \
+	config.guess \
+	depcomp \
+	mkinstalldirs \
+	install-sh \
+	ABOUT-NLS \
+	ChangeLog \
+	INSTALL \
+	conf.in \
+	aclocal.m4 \
+	Makefile.in \
+	mdate-sh \
+	missing
+
+
+EXTRA_DIST = \
+	flex.spec.in \
+	flex.spec \
+	.indent.pro \
+	AUTHORS \
+	COPYING \
+	INSTALL \
+	NEWS \
+	ONEWS \
+	README \
+	README.cvs-snapshot \
+	RoadMap \
+	THANKS \
+	TODO \
+	autogen.sh \
+	flex.skl \
+	mkskel.sh \
+	ABOUT-NLS \
+	config.rpath \
+	gettext.h
+
+
+BUILT_SOURCES = \
+	skel.c
+
+
+SUBDIRS = \
+	. \
+	doc \
+	m4  \
+	examples \
+	po \
+	tools \
+	tests
+
+
+localedir = $(datadir)/locale
+AM_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" -I@includedir@ -I$(top_srcdir)/intl
+
+# Run GNU indent on sources. Don't run this unless all the sources compile cleanly.
+#
+# Whole idea:
+#   1. Check for .indent.pro, otherwise indent will use unknown
+#      settings, or worse, the GNU defaults.)
+#   2. Check that this is GNU indent.
+#   3. Make sure to process only the NON-generated .c and .h files.
+#   4. Run indent twice per file. The first time is a test.
+#      Otherwise, indent overwrites your file even if it fails!
+indentfiles = \
+	buf.c \
+	ccl.c \
+	dfa.c \
+	ecs.c \
+	filter.c \
+	flexdef.h \
+	gen.c \
+	libmain.c \
+	libyywrap.c \
+	main.c \
+	misc.c \
+	nfa.c \
+	options.c \
+	options.h \
+	regex.c \
+	scanopt.c \
+	scanopt.h \
+	sym.c \
+	tables.c \
+	tables.h \
+	tables_shared.c \
+	tables_shared.h \
+	tblcmp.c
+
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = flex.spec
+LIBRARIES = $(lib_LIBRARIES)
+
+libfl_a_AR = $(AR) cru
+libfl_a_LIBADD =
+am_libfl_a_OBJECTS = libmain.$(OBJEXT) libyywrap.$(OBJEXT)
+libfl_a_OBJECTS = $(am_libfl_a_OBJECTS)
+bin_PROGRAMS = flex$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+
+am_flex_OBJECTS = ccl.$(OBJEXT) dfa.$(OBJEXT) ecs.$(OBJEXT) \
+	gen.$(OBJEXT) main.$(OBJEXT) misc.$(OBJEXT) nfa.$(OBJEXT) \
+	parse.$(OBJEXT) scan.$(OBJEXT) skel.$(OBJEXT) sym.$(OBJEXT) \
+	tblcmp.$(OBJEXT) yylex.$(OBJEXT) options.$(OBJEXT) \
+	scanopt.$(OBJEXT) buf.$(OBJEXT) tables.$(OBJEXT) \
+	tables_shared.$(OBJEXT) filter.$(OBJEXT) regex.$(OBJEXT)
+flex_OBJECTS = $(am_flex_OBJECTS)
+flex_LDADD = $(LDADD)
+flex_DEPENDENCIES =
+flex_LDFLAGS =
+
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I.
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/buf.Po ./$(DEPDIR)/ccl.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/dfa.Po ./$(DEPDIR)/ecs.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/filter.Po ./$(DEPDIR)/gen.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/libmain.Po ./$(DEPDIR)/libyywrap.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/main.Po ./$(DEPDIR)/misc.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/nfa.Po ./$(DEPDIR)/options.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/parse.Po ./$(DEPDIR)/regex.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/scan.Po ./$(DEPDIR)/scanopt.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/skel.Po ./$(DEPDIR)/sym.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/tables.Po ./$(DEPDIR)/tables_shared.Po \
+@AMDEP_TRUE@	./$(DEPDIR)/tblcmp.Po ./$(DEPDIR)/yylex.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+LEXCOMPILE = $(LEX) $(LFLAGS) $(AM_LFLAGS)
+YACCCOMPILE = $(YACC) $(YFLAGS) $(AM_YFLAGS)
+DIST_SOURCES = $(libfl_a_SOURCES) $(flex_SOURCES)
+HEADERS = $(include_HEADERS) $(noinst_HEADERS)
+
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
+	ps-recursive install-info-recursive uninstall-info-recursive \
+	all-recursive install-data-recursive install-exec-recursive \
+	installdirs-recursive install-recursive uninstall-recursive \
+	check-recursive installcheck-recursive
+DIST_COMMON = README $(include_HEADERS) $(noinst_HEADERS) ABOUT-NLS \
+	AUTHORS COPYING ChangeLog INSTALL Makefile.am Makefile.in NEWS \
+	README-alpha THANKS TODO aclocal.m4 conf.in config.guess \
+	config.rpath config.sub configure configure.in depcomp \
+	flex.spec.in install-sh missing mkinstalldirs parse.c parse.h \
+	scan.c
+DIST_SUBDIRS = $(SUBDIRS)
+SOURCES = $(libfl_a_SOURCES) $(flex_SOURCES)
+
+all: $(BUILT_SOURCES) config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .l .o .obj .y
+
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnits  Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure:  $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4):  configure.in m4/codeset.m4 m4/gettext.m4 m4/glibc21.m4 m4/iconv.m4 m4/intdiv0.m4 m4/inttypes-pri.m4 m4/inttypes.m4 m4/inttypes_h.m4 m4/isc-posix.m4 m4/lcmessage.m4 m4/lib-ld.m4 m4/lib-link.m4 m4/lib-prefix.m4 m4/progtest.m4 m4/stdint_h.m4 m4/uintmax_t.m4 m4/ulonglong.m4
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/conf.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+
+$(srcdir)/conf.in:  $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	touch $(srcdir)/conf.in
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+flex.spec: $(top_builddir)/config.status flex.spec.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
 
-LN_S = @LN_S@
-YACC = @YACC@
-CC = @CC@
 AR = ar
-RANLIB = @RANLIB@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+libLIBRARIES_INSTALL = $(INSTALL_DATA)
+install-libLIBRARIES: $(lib_LIBRARIES)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	@list='$(lib_LIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    f="`echo $$p | sed -e 's|^.*/||'`"; \
+	    echo " $(libLIBRARIES_INSTALL) $$p $(DESTDIR)$(libdir)/$$f"; \
+	    $(libLIBRARIES_INSTALL) $$p $(DESTDIR)$(libdir)/$$f; \
+	  else :; fi; \
+	done
+	@$(POST_INSTALL)
+	@list='$(lib_LIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    p="`echo $$p | sed -e 's|^.*/||'`"; \
+	    echo " $(RANLIB) $(DESTDIR)$(libdir)/$$p"; \
+	    $(RANLIB) $(DESTDIR)$(libdir)/$$p; \
+	  else :; fi; \
+	done
+
+uninstall-libLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LIBRARIES)'; for p in $$list; do \
+	  p="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(libdir)/$$p"; \
+	  rm -f $(DESTDIR)$(libdir)/$$p; \
+	done
+
+clean-libLIBRARIES:
+	-test -z "$(lib_LIBRARIES)" || rm -f $(lib_LIBRARIES)
+libfl.a: $(libfl_a_OBJECTS) $(libfl_a_DEPENDENCIES) 
+	-rm -f libfl.a
+	$(libfl_a_AR) libfl.a $(libfl_a_OBJECTS) $(libfl_a_LIBADD)
+	$(RANLIB) libfl.a
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	  ; then \
+	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
+	   $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+	  rm -f $(DESTDIR)$(bindir)/$$f; \
+	done
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+installcheck-binPROGRAMS: $(bin_PROGRAMS)
+	bad=0; pid=$$$$; list="$(bin_PROGRAMS)"; for p in $$list; do \
+	  case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \
+	   *" $$p "* | *" $(srcdir)/$$p "*) continue;; \
+	  esac; \
+	  f=`echo "$$p" | \
+	     sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  for opt in --help --version; do \
+	    if $(DESTDIR)$(bindir)/$$f $$opt > c$${pid}_.out 2> c$${pid}_.err \
+	         && test -n "`cat c$${pid}_.out`" \
+	         && test -z "`cat c$${pid}_.err`"; then :; \
+	    else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \
+	  done; \
+	done; rm -f c$${pid}_.???; exit $$bad
+parse.h: parse.c
+	@if test ! -f $@; then \
+	  rm -f parse.c; \
+	  $(MAKE) parse.c; \
+	else :; fi
+flex$(EXEEXT): $(flex_OBJECTS) $(flex_DEPENDENCIES) 
+	@rm -f flex$(EXEEXT)
+	$(LINK) $(flex_LDFLAGS) $(flex_OBJECTS) $(flex_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
 
-# You normally do not need to modify anything below this point.
-# ------------------------------------------------------------
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/buf.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ccl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dfa.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ecs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filter.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gen.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libmain.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libyywrap.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nfa.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/options.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/regex.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scan.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scanopt.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/skel.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sym.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tables.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tables_shared.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tblcmp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/yylex.Po@am__quote@
 
-CPPFLAGS = -I. -I$(srcdir)
+distclean-depend:
+	-rm -rf ./$(DEPDIR)
 
 .c.o:
-	$(CC) -c $(CPPFLAGS) $(CFLAGS) $<
+@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@	  -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
+@am__fastdepCC_TRUE@	then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@	else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@	fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
 
-HEADERS = flexdef.h version.h
+.c.obj:
+@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@	  -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'`; \
+@am__fastdepCC_TRUE@	then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@	else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@	fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'`
 
-SOURCES = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.y \
-	scan.l skel.c sym.c tblcmp.c yylex.c
-OBJECTS = ccl.o dfa.o ecs.o gen.o main.o misc.o nfa.o parse.o \
-	scan.o skel.o sym.o tblcmp.o yylex.o @ALLOCA@
+.l.c:
+	$(LEXCOMPILE) `test -f $< || echo '$(srcdir)/'`$<
+	sed '/^#/ s|$(LEX_OUTPUT_ROOT)\.c|$@|' $(LEX_OUTPUT_ROOT).c >$@
+	rm -f $(LEX_OUTPUT_ROOT).c
 
-LIBSRCS = libmain.c libyywrap.c
-LIBOBJS = libmain.o libyywrap.o
+.y.c:
+	$(YACCCOMPILE) `test -f '$<' || echo '$(srcdir)/'`$<
+	sed '/^#/ s|y\.tab\.c|$@|' y.tab.c >$@
+	rm -f y.tab.c
+	if test -f y.tab.h; then \
+	  to=`echo "$*_H" | sed \
+                -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
+                -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \
+	  sed "/^#/ s/Y_TAB_H/$$to/g" y.tab.h >$*.ht; \
+	  rm -f y.tab.h; \
+	  if cmp -s $*.ht $*.h; then \
+	    rm -f $*.ht ;\
+	  else \
+	    mv $*.ht $*.h; \
+	  fi; \
+	fi
+	if test -f y.output; then \
+	  mv y.output $*.output; \
+	fi
+uninstall-info-am:
+includeHEADERS_INSTALL = $(INSTALL_HEADER)
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \
+	  $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \
+	done
 
-LINTSRCS = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.c \
-	scan.c skel.c sym.c tblcmp.c yylex.c
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(includedir)/$$f"; \
+	  rm -f $(DESTDIR)$(includedir)/$$f; \
+	done
 
-DISTFILES = README NEWS COPYING INSTALL FlexLexer.h \
-	configure.in conf.in Makefile.in mkskel.sh flex.skl \
-	$(HEADERS) $(SOURCES) $(LIBSRCS) MISC \
-	flex.1 scan.c install.sh mkinstalldirs configure
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
 
-DIST_NAME = flex
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
 
-# which "flex" to use to generate scan.c from scan.l
-FLEX_EXEC = ./$(FLEX)
-FLEX_FLAGS = -t $(PERF_REPORT)
-COMPRESSION =
-PERF_REPORT = -p
+ETAGS = etags
+ETAGSFLAGS =
 
+CTAGS = ctags
+CTAGSFLAGS =
 
-all: $(FLEX)
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
 
-$(FLEX): .bootstrap $(OBJECTS) $(FLEXLIB)
-	$(CC) $(CFLAGS) -o $(FLEX) $(LDFLAGS) $(OBJECTS) $(FLEXLIB) $(LIBS)
+TAGS: tags-recursive $(HEADERS) $(SOURCES) conf.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) conf.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
 
-.bootstrap: initscan.c
-	@rm -f scan.c
-	cp $(srcdir)/initscan.c scan.c
-	touch .bootstrap
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) conf.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) conf.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
 
-parse.c: parse.y
-	$(YACC) -d $(srcdir)/parse.y
-	@sed '/extern char.*malloc/d' <y.tab.c >parse.tmp
-	@mv parse.tmp parse.c
-	@mv y.tab.h parse.h
-	@rm -f y.tab.c
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
 
-parse.h: parse.c
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+distdir = $(PACKAGE)-$(VERSION)
+
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+
+distdir: $(DISTFILES)
+	@case `sed 15q $(srcdir)/NEWS` in \
+	*"$(VERSION)"*) : ;; \
+	*) \
+	  echo "NEWS not updated; not releasing" 1>&2; \
+	  exit 1;; \
+	esac
+	$(am__remove_distdir)
+	mkdir $(distdir)
+	$(mkinstalldirs) $(distdir)/. $(distdir)/po
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$(top_distdir)" \
+	        distdir=../$(distdir)/$$subdir \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
 
-scan.c: scan.l
-	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) $(srcdir)/scan.l >scan.c
-	@sed s,\"$(srcdir)/scan.l\",\"scan.l\", <scan.c >scan.tmp
-	@mv scan.tmp scan.c
-
-scan.o: scan.c parse.h flexdef.h config.h
-yylex.o: yylex.c parse.h flexdef.h config.h
-
-skel.c: flex.skl mkskel.sh
-	$(SHELL) $(srcdir)/mkskel.sh $(srcdir)/flex.skl >skel.c
-
-main.o: main.c flexdef.h config.h version.h
-ccl.o: ccl.c flexdef.h config.h
-dfa.o: dfa.c flexdef.h config.h
-ecs.o: ecs.c flexdef.h config.h
-gen.o: gen.c flexdef.h config.h
-misc.o: misc.c flexdef.h config.h
-nfa.o: nfa.c flexdef.h config.h
-parse.o: parse.c flexdef.h config.h
-skel.o: skel.c flexdef.h config.h
-sym.o: sym.c flexdef.h config.h
-tblcmp.o: tblcmp.c flexdef.h config.h
-
-alloca.o: alloca.c
-	$(CC) $(CPPFLAGS) $(CFLAGS) -c -Dxmalloc=yy_flex_xmalloc alloca.c
-
-alloca.c: $(srcdir)/MISC/alloca.c
-	@rm -f alloca.c
-	cp $(srcdir)/MISC/alloca.c .
-
-test: check
-check: $(FLEX)
-	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) $(srcdir)/scan.l \
-	| sed s,\"$(srcdir)/scan.l\",\"scan.l\", \
-	| diff scan.c -
-	@echo "Check successful, using COMPRESSION=\"$(COMPRESSION)\""
-
-bigcheck:
-	rm -f scan.c ; $(MAKE) COMPRESSION="-C" check
-	rm -f scan.c ; $(MAKE) COMPRESSION="-Ce" check
-	rm -f scan.c ; $(MAKE) COMPRESSION="-Cm" check
-	rm -f scan.c ; $(MAKE) COMPRESSION="-f" check
-	rm -f scan.c ; $(MAKE) COMPRESSION="-Cfea" check
-	rm -f scan.c ; $(MAKE) COMPRESSION="-CFer" check
-	rm -f scan.c ; $(MAKE) COMPRESSION="-l" PERF_REPORT="" check
-	rm -f scan.c ; $(MAKE)
-	@echo "All checks successful"
-
-$(FLEXLIB): $(LIBOBJS)
-	$(AR) cru $(FLEXLIB) $(LIBOBJS)
-	-$(RANLIB) $(FLEXLIB)
-
-$(FLEX).man: flex.1
-	cd $(srcdir) && nroff -man flex.1 >$(FLEX).man
-
-install: $(FLEX) $(FLEXLIB) installdirs install.$(INSTALLMAN)
-	$(INSTALL_PROGRAM) $(FLEX) $(bindir)/$(FLEX)
-	@rm -f $(bindir)/$(FLEX)++
-	cd $(bindir) && $(LN_S) $(FLEX) $(FLEX)++
-	$(INSTALL_DATA) $(FLEXLIB) $(libdir)/$(FLEXLIB)
-	-cd $(libdir) && $(RANLIB) $(FLEXLIB)
-	$(INSTALL_DATA) $(srcdir)/FlexLexer.h $(includedir)/FlexLexer.h
-
-# Note, the following rules delete any vestigial flexdoc installed
-# for a prior flex release.
-install.man: flex.1
-	rm -f $(mandir)/$(FLEX)doc.$(manext)
-	$(INSTALL_DATA) $(srcdir)/flex.1 $(mandir)/$(FLEX).$(manext)
-
-install.cat: $(FLEX).man
-	rm -f $(mandir)/$(FLEX)doc.$(manext)
-	$(INSTALL_DATA) $(srcdir)/$(FLEX).man $(mandir)/$(FLEX).$(manext)
-
-installdirs:
-	$(SHELL) $(srcdir)/mkinstalldirs \
-	  $(bindir) $(libdir) $(includedir) $(mandir)
-
-uninstall:
-	rm -f $(bindir)/$(FLEX) $(bindir)/$(FLEX)++
-	rm -f $(libdir)/$(FLEXLIB)
-	rm -f $(includedir)/FlexLexer.h
-	rm -f $(mandir)/$(FLEX).$(manext) $(mandir)/$(FLEX)doc.$(manext)
-
-tags: $(SOURCES)
-	ctags $(SOURCES)
-
-TAGS: $(SOURCES)
-	etags $(SOURCES)
-
-lint: $(LINTSRCS)
-	lint -Dconst= $(LINTSRCS) > flex.lint
-
-gcc-lint: $(LINTSRCS)
-	gcc -Dlint -Wall $(LINTSRCS) >flex.gcc-lint 2>&1
-
-mostlyclean:
-	rm -f a.out *.bak core errs scan.tmp
-
-clean: mostlyclean
-	rm -f flex parse.c parse.h *.o alloca.c *.lint lex.yy.c lex.yy.cc \
-		$(FLEXLIB) config.log config.cache
-
-distclean: clean
-	rm -f .bootstrap $(FLEX) scan.c tags TAGS Makefile config.status \
-		config.h stamp-h config.log config.cache
-
-maintainer-clean: distclean
-	@echo "This command is intended for maintainers to use;"
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	$(am__remove_distdir)
+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && $(mkinstalldirs) $$dc_destdir \
+	  && cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    --with-included-gettext \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({   $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+	  && rm -f $(distdir).tar.gz \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@echo "$(distdir).tar.gz is ready for distribution" | \
+	  sed 'h;s/./=/g;p;x;p;x'
+distuninstallcheck:
+	cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(LIBRARIES) $(PROGRAMS) $(HEADERS) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+	$(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) $(DESTDIR)$(includedir)
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
-	rm -f $(FLEX).man skel.c flex*.tar.gz flex*.tar.Z
-
-dist: $(FLEX) $(DISTFILES) parse.c parse.h $(srcdir)/$(FLEX).man
-	$(MAKE) DIST_NAME=flex-`sed <version.h 's/[^"]*"//' | sed 's/"//'` dist2
-
-dist2:
-	@rm -rf $(DIST_NAME)
-	@rm -f $(DIST_NAME).tar $(DIST_NAME).tar.Z $(DIST_NAME).tar.gz
-	@mkdir $(DIST_NAME)
-	tar cf - $(DISTFILES) | (cd $(DIST_NAME) && tar xfB -)
-	@mv $(DIST_NAME)/scan.c $(DIST_NAME)/initscan.c
-	@chmod 444 $(DIST_NAME)/initscan.c
-	@chmod +w $(DIST_NAME)/Makefile.in
-	@cp parse.c parse.h $(DIST_NAME)/MISC
-	@col -b <$(srcdir)/$(FLEX).man >$(DIST_NAME)/MISC/flex.man
-	tar chf $(DIST_NAME).tar $(DIST_NAME)
-	compress <$(DIST_NAME).tar >$(DIST_NAME).tar.Z
-	gzip <$(DIST_NAME).tar >$(DIST_NAME).tar.gz
-	@rm $(DIST_NAME).tar
-
-# For an explanation of the following Makefile rules, see node
-# `Automatic Remaking' in GNU Autoconf documentation.
-Makefile: $(srcdir)/Makefile.in config.status
-	CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status
-config.status: configure
-	./config.status --recheck
-configure: configure.in
-	cd $(srcdir) && autoconf
-config.h: stamp-h
-stamp-h: conf.in config.status
-	CONFIG_FILES= CONFIG_HEADERS=config.h:conf.in ./config.status
-	echo timestamp >stamp-h
-# conf.in: stamp-h.in
-# stamp-h.in: configure.in acconfig.h
-# 	cd $(srcdir) && autoheader
-# 	config.h.in conf.in
-# 	cho timestamp > $(srcdir)/stamp-h.in
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+	-rm -f parse.h
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+	-rm -f parse.c
+	-rm -f scan.c
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLIBRARIES \
+	mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-includeHEADERS
+
+install-exec-am: install-binPROGRAMS install-libLIBRARIES
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am: installcheck-binPROGRAMS
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf autom4te.cache
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-info-am uninstall-libLIBRARIES
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libLIBRARIES \
+	clean-recursive ctags ctags-recursive dist dist-all dist-bzip2 \
+	dist-gzip distcheck distclean distclean-compile \
+	distclean-depend distclean-generic distclean-hdr \
+	distclean-recursive distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am dvi-recursive info info-am \
+	info-recursive install install-am install-binPROGRAMS \
+	install-data install-data-am install-data-recursive \
+	install-exec install-exec-am install-exec-recursive \
+	install-includeHEADERS install-info install-info-am \
+	install-info-recursive install-libLIBRARIES install-man \
+	install-recursive install-strip installcheck installcheck-am \
+	installcheck-binPROGRAMS installdirs installdirs-am \
+	installdirs-recursive maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-recursive pdf pdf-am \
+	pdf-recursive ps ps-am ps-recursive tags tags-recursive \
+	uninstall uninstall-am uninstall-binPROGRAMS \
+	uninstall-includeHEADERS uninstall-info-am \
+	uninstall-info-recursive uninstall-libLIBRARIES \
+	uninstall-recursive
+
+
+skel.c: flex.skl mkskel.sh flexint.h tables_shared.h
+	sed 's/m4_/m4postproc_/g; s/m4preproc_/m4_/g' $(srcdir)/flex.skl | $(m4) -P -DFLEX_MAJOR_VERSION=`echo $(VERSION)|cut -f 1 -d .` -DFLEX_MINOR_VERSION=`echo $(VERSION)|cut -f 2 -d .` -DFLEX_SUBMINOR_VERSION=`echo $(VERSION)|cut -f 3 -d .` | sed 's/m4postproc_/m4_/g' | $(SHELL) $(srcdir)/mkskel.sh  >skel.c
+
+# Explicitly describe dependencies.
+# You can recreate this with `gcc -I. -MM *.c'
+buf.o: buf.c flexdef.h flexint.h
+ccl.o: ccl.c flexdef.h flexint.h
+dfa.o: dfa.c flexdef.h flexint.h tables.h tables_shared.h
+ecs.o: ecs.c flexdef.h flexint.h
+gen.o: gen.c flexdef.h flexint.h tables.h tables_shared.h
+libmain.o: libmain.c
+libyywrap.o: libyywrap.c
+main.o: main.c flexdef.h flexint.h version.h options.h scanopt.h \
+ tables.h tables_shared.h
+misc.o: misc.c flexdef.h flexint.h tables.h tables_shared.h
+nfa.o: nfa.c flexdef.h flexint.h
+options.o: options.c options.h scanopt.h flexdef.h flexint.h
+parse.o: parse.c flexdef.h flexint.h tables.h tables_shared.h
+scan.o: scan.c flexdef.h flexint.h parse.h
+scanopt.o: scanopt.c flexdef.h flexint.h scanopt.h
+skel.o: skel.c flexdef.h flexint.h
+sym.o: sym.c flexdef.h flexint.h
+tables.o: tables.c flexdef.h flexint.h tables.h tables_shared.h
+tables_shared.o: tables_shared.c flexdef.h flexint.h tables.h \
+ tables_shared.h
+tblcmp.o: tblcmp.c flexdef.h flexint.h
+yylex.o: yylex.c flexdef.h flexint.h parse.h
+filter.o: filter.c flexdef.h flexint.h
+
+# Create a tags file.
+tags:
+	ctags --c-types='defgmstuv' $(srcdir)/*.[ch]
+
+# Create the ChangeLog, but only if we're inside a cvs working directory
+
+ChangeLog:
+	if [ -d CVS ] ; then \
+		sh $(srcdir)/tools/cvs2cl.pl -F trunk -U $(srcdir)/tools/cvsauthors \
+	; fi
+
+indent:
+	if [ -f .indent.pro ] ; then \
+	for f in $(indentfiles);\
+	do\
+		echo indenting $$f ;\
+		$(indent) < $$f >/dev/null && indent $$f || echo $$f FAILED to indent ;\
+	done \
+	fi
+
+.PHONY: ChangeLog tags indent
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT: