diff options
-rw-r--r-- | ABOUT-NLS | 432 | ||||
-rwxr-xr-x | autogen.sh | 2 | ||||
-rw-r--r-- | configure.in | 7 | ||||
-rw-r--r-- | m4/.cvsignore | 2 | ||||
-rw-r--r-- | m4/Makefile.am | 1 | ||||
-rw-r--r-- | m4/codeset.m4 | 23 | ||||
-rw-r--r-- | m4/gettext.m4 | 557 | ||||
-rw-r--r-- | m4/glibc21.m4 | 32 | ||||
-rw-r--r-- | m4/iconv.m4 | 103 | ||||
-rw-r--r-- | m4/isc-posix.m4 | 26 | ||||
-rw-r--r-- | m4/lcmessage.m4 | 32 | ||||
-rw-r--r-- | m4/lib-ld.m4 | 97 | ||||
-rw-r--r-- | m4/lib-link.m4 | 554 | ||||
-rw-r--r-- | m4/lib-prefix.m4 | 148 | ||||
-rw-r--r-- | m4/progtest.m4 | 59 |
15 files changed, 3 insertions, 2072 deletions
diff --git a/ABOUT-NLS b/ABOUT-NLS deleted file mode 100644 index 57e4b67..0000000 --- a/ABOUT-NLS +++ /dev/null @@ -1,432 +0,0 @@ -Notes on the Free Translation Project -************************************* - - Free software is going international! The Free Translation Project -is a way to get maintainers of free software, translators, and users all -together, so that will gradually become able to speak many languages. -A few packages already provide translations for their messages. - - If you found this `ABOUT-NLS' file inside a distribution, you may -assume that the distributed package does use GNU `gettext' internally, -itself available at your nearest GNU archive site. But you do _not_ -need to install GNU `gettext' prior to configuring, installing or using -this package with messages translated. - - Installers will find here some useful hints. These notes also -explain how users should proceed for getting the programs to use the -available translations. They tell how people wanting to contribute and -work at translations should contact the appropriate team. - - When reporting bugs in the `intl/' directory or bugs which may be -related to internationalization, you should tell about the version of -`gettext' which is used. The information can be found in the -`intl/VERSION' file, in internationalized packages. - -Quick configuration advice -========================== - - If you want to exploit the full power of internationalization, you -should configure it using - - ./configure --with-included-gettext - -to force usage of internationalizing routines provided within this -package, despite the existence of internationalizing capabilities in the -operating system where this package is being installed. So far, only -the `gettext' implementation in the GNU C library version 2 provides as -many features (such as locale alias, message inheritance, automatic -charset conversion or plural form handling) as the implementation here. -It is also not possible to offer this additional functionality on top -of a `catgets' implementation. Future versions of GNU `gettext' will -very likely convey even more functionality. So it might be a good idea -to change to GNU `gettext' as soon as possible. - - So you need _not_ provide this option if you are using GNU libc 2 or -you have installed a recent copy of the GNU gettext package with the -included `libintl'. - -INSTALL Matters -=============== - - Some packages are "localizable" when properly installed; the -programs they contain can be made to speak your own native language. -Most such packages use GNU `gettext'. Other packages have their own -ways to internationalization, predating GNU `gettext'. - - By default, this package will be installed to allow translation of -messages. It will automatically detect whether the system already -provides the GNU `gettext' functions. If not, the GNU `gettext' own -library will be used. This library is wholly contained within this -package, usually in the `intl/' subdirectory, so prior installation of -the GNU `gettext' package is _not_ required. Installers may use -special options at configuration time for changing the default -behaviour. The commands: - - ./configure --with-included-gettext - ./configure --disable-nls - -will respectively bypass any pre-existing `gettext' to use the -internationalizing routines provided within this package, or else, -_totally_ disable translation of messages. - - When you already have GNU `gettext' installed on your system and run -configure without an option for your new package, `configure' will -probably detect the previously built and installed `libintl.a' file and -will decide to use this. This might be not what is desirable. You -should use the more recent version of the GNU `gettext' library. I.e. -if the file `intl/VERSION' shows that the library which comes with this -package is more recent, you should use - - ./configure --with-included-gettext - -to prevent auto-detection. - - The configuration process will not test for the `catgets' function -and therefore it will not be used. The reason is that even an -emulation of `gettext' on top of `catgets' could not provide all the -extensions of the GNU `gettext' library. - - Internationalized packages have usually many `po/LL.po' files, where -LL gives an ISO 639 two-letter code identifying the language. Unless -translations have been forbidden at `configure' time by using the -`--disable-nls' switch, all available translations are installed -together with the package. However, the environment variable `LINGUAS' -may be set, prior to configuration, to limit the installed set. -`LINGUAS' should then contain a space separated list of two-letter -codes, stating which languages are allowed. - -Using This Package -================== - - As a user, if your language has been installed for this package, you -only have to set the `LANG' environment variable to the appropriate -`LL_CC' combination. Here `LL' is an ISO 639 two-letter language code, -and `CC' is an ISO 3166 two-letter country code. For example, let's -suppose that you speak German and live in Germany. At the shell -prompt, merely execute `setenv LANG de_DE' (in `csh'), -`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). -This can be done from your `.login' or `.profile' file, once and for -all. - - You might think that the country code specification is redundant. -But in fact, some languages have dialects in different countries. For -example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The -country code serves to distinguish the dialects. - - The locale naming convention of `LL_CC', with `LL' denoting the -language and `CC' denoting the country, is the one use on systems based -on GNU libc. On other systems, some variations of this scheme are -used, such as `LL' or `LL_CC.ENCODING'. You can get the list of -locales supported by your system for your country by running the command -`locale -a | grep '^LL''. - - Not all programs have translations for all languages. By default, an -English message is shown in place of a nonexistent translation. If you -understand other languages, you can set up a priority list of languages. -This is done through a different environment variable, called -`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' -for the purpose of message handling, but you still need to have `LANG' -set to the primary language; this is required by other parts of the -system libraries. For example, some Swedish users who would rather -read translations in German than English for when Swedish is not -available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. - - In the `LANGUAGE' environment variable, but not in the `LANG' -environment variable, `LL_CC' combinations can be abbreviated as `LL' -to denote the language's main dialect. For example, `de' is equivalent -to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' -(Portuguese as spoken in Portugal) in this context. - -Translating Teams -================= - - For the Free Translation Project to be a success, we need interested -people who like their own language and write it well, and who are also -able to synergize with other translators speaking the same language. -Each translation team has its own mailing list. The up-to-date list of -teams can be found at the Free Translation Project's homepage, -`http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams" -area. - - If you'd like to volunteer to _work_ at translating messages, you -should become a member of the translating team for your own language. -The subscribing address is _not_ the same as the list itself, it has -`-request' appended. For example, speakers of Swedish can send a -message to `sv-request@li.org', having this message body: - - subscribe - - Keep in mind that team members are expected to participate -_actively_ in translations, or at solving translational difficulties, -rather than merely lurking around. If your team does not exist yet and -you want to start one, or if you are unsure about what to do or how to -get started, please write to `translation@iro.umontreal.ca' to reach the -coordinator for all translator teams. - - The English team is special. It works at improving and uniformizing -the terminology in use. Proven linguistic skill are praised more than -programming skill, here. - -Available Packages -================== - - Languages are not equally supported in all packages. The following -matrix shows the current state of internationalization, as of July -2002. The matrix shows, in regard of each package, for which languages -PO files have been submitted to translation coordination, with a -translation percentage of at least 50%. - - Ready PO files be bg ca cs da de el en eo es et fi fr - +----------------------------------------+ - a2ps | [] [] [] [] | - bash | [] [] [] [] | - bfd | [] [] | - binutils | [] [] | - bison | [] [] [] [] | - clisp | [] [] [] [] | - clisp | | - clisplow | | - cpio | [] [] [] [] | - darkstat | () | - diffutils | [] [] [] [] [] [] | - enscript | [] [] | - error | [] [] [] | - fetchmail | [] () [] [] [] () | - fileutils | [] [] [] [] [] | - findutils | [] [] [] [] [] [] | - flex | [] [] [] [] [] | - gas | [] [] | - gawk | [] [] [] | - gcal | [] [] | - gcc | [] [] | - gettext | [] [] [] [] [] | - gnupg | [] [] [] [] [] [] [] | - gprof | [] [] | - gpsdrive | () () () () () | - grep | [] [] [] [] [] [] [] | - gretl | [] | - gthumb | () () () | - hello | [] [] [] [] [] [] [] [] [] | - id-utils | [] [] [] | - indent | [] [] [] [] [] | - jpilot | () [] [] [] | - jwhois | [] [] | - kbd | [] [] [] | - ld | [] [] | - libc | [] [] [] [] [] [] [] | - libiconv | [] [] [] [] | - lifelines | () () | - lilypond | [] [] [] | - lingoteach | [] [] | - lingoteach_lessons| () () | - lynx | [] [] [] [] [] | - m4 | [] [] [] [] [] | - make | [] [] [] [] | - man-db | [] () () [] () () | - mysecretdiary | [] [] [] | - nano | [] () [] [] [] [] | - nano_1_0 | [] () [] [] [] [] | - opcodes | [] [] [] | - parted | [] [] [] [] [] | - ptx | [] [] [] [] [] [] [] | - python | | - recode | [] [] [] [] [] [] | - sed | [] [] [] [] [] [] [] [] [] | - sh-utils | [] [] [] [] | - sharutils | [] [] [] [] [] [] | - sketch | () [] () | - soundtracker | [] [] [] | - sp | [] | - tar | [] [] [] [] [] [] | - texinfo | [] [] [] [] [] | - textutils | [] [] [] [] [] | - util-linux | [] [] [] [] [] [] | - vorbis-tools | [] | - wastesedge | | - wdiff | [] [] [] [] [] [] | - wget | [] [] [] [] [] [] [] [] [] [] | - +----------------------------------------+ - be bg ca cs da de el en eo es et fi fr - 0 2 19 10 30 44 9 1 12 45 16 3 53 - - gl he hr hu id it ja ko lv nb nl nn - +-------------------------------------+ - a2ps | () () [] | - bash | [] | - bfd | [] | - binutils | [] | - bison | [] [] [] [] | - clisp | [] | - clisp | | - clisplow | | - cpio | [] [] [] [] | - darkstat | () | - diffutils | [] [] [] [] [] | - enscript | [] [] | - error | [] | - fetchmail | [] | - fileutils | [] [] [] | - findutils | [] [] [] [] [] [] [] [] | - flex | [] | - gas | | - gawk | [] | - gcal | | - gcc | [] | - gettext | [] [] | - gnupg | [] [] [] [] | - gprof | | - gpsdrive | [] () () | - grep | [] [] [] [] [] [] [] | - gretl | | - gthumb | () () | - hello | [] [] [] [] [] [] [] [] [] [] [] [] | - id-utils | [] [] | - indent | [] [] [] [] | - jpilot | () () | - jwhois | [] [] | - kbd | | - ld | | - libc | [] [] [] [] | - libiconv | [] [] [] | - lifelines | | - lilypond | [] [] | - lingoteach | [] | - lingoteach_lessons| | - lynx | [] [] [] [] | - m4 | [] [] [] [] | - make | [] [] [] [] [] [] | - man-db | () () | - mysecretdiary | [] | - nano | [] [] [] [] [] [] | - nano_1_0 | [] [] [] [] [] | - opcodes | [] [] | - parted | [] [] [] | - ptx | [] [] [] [] [] | - python | | - recode | [] [] [] | - sed | [] [] [] [] [] [] [] [] | - sh-utils | [] [] [] | - sharutils | [] [] [] | - sketch | () | - soundtracker | [] [] | - sp | | - tar | [] [] [] [] [] | - texinfo | [] [] [] | - textutils | [] [] [] | - util-linux | () [] | - vorbis-tools | | - wastesedge | | - wdiff | [] [] [] | - wget | [] [] [] [] [] [] | - +-------------------------------------+ - gl he hr hu id it ja ko lv nb nl nn - 23 9 12 18 14 13 26 9 1 8 19 4 - - no pl pt pt_BR ru sk sl sv tr uk zh_TW - +----------------------------------------+ - a2ps | () () () [] [] [] [] [] | 10 - bash | [] | 6 - bfd | [] [] | 5 - binutils | [] [] | 5 - bison | [] [] [] | 11 - clisp | | 5 - clisp | | 0 - clisplow | | 0 - cpio | [] [] [] [] | 12 - darkstat | [] () | 1 - diffutils | [] [] [] [] [] [] | 17 - enscript | [] [] [] [] | 8 - error | [] [] [] | 7 - fetchmail | () () [] | 6 - fileutils | [] [] [] [] [] | 13 - findutils | [] [] [] [] [] [] [] | 21 - flex | [] [] [] | 9 - gas | [] | 3 - gawk | [] [] | 6 - gcal | [] [] | 4 - gcc | [] | 4 - gettext | [] [] [] [] [] [] | 13 - gnupg | [] [] [] | 14 - gprof | [] [] | 4 - gpsdrive | [] [] () | 3 - grep | [] [] [] [] | 18 - gretl | | 1 - gthumb | () () [] | 1 - hello | [] [] [] [] [] [] [] | 28 - id-utils | [] [] [] [] | 9 - indent | [] [] [] [] [] | 14 - jpilot | () () [] | 4 - jwhois | [] () () [] [] | 7 - kbd | [] [] | 5 - ld | [] [] | 4 - libc | [] [] [] [] [] [] | 17 - libiconv | [] [] [] [] | 11 - lifelines | [] | 1 - lilypond | [] | 6 - lingoteach | [] [] | 5 - lingoteach_lessons| | 0 - lynx | [] [] [] [] | 13 - m4 | [] [] [] | 12 - make | [] [] [] [] | 14 - man-db | | 3 - mysecretdiary | [] [] [] | 7 - nano | [] [] [] [] | 15 - nano_1_0 | [] [] [] [] | 14 - opcodes | [] [] | 7 - parted | [] [] [] | 11 - ptx | [] [] [] [] [] [] [] | 19 - python | | 0 - recode | [] [] [] [] [] [] | 15 - sed | [] [] [] [] [] [] | 23 - sh-utils | [] | 8 - sharutils | [] [] [] [] | 13 - sketch | [] () [] | 4 - soundtracker | [] | 6 - sp | | 1 - tar | [] [] [] [] [] [] [] | 18 - texinfo | [] [] | 10 - textutils | [] [] [] [] [] | 13 - util-linux | [] [] [] | 10 - vorbis-tools | [] | 2 - wastesedge | | 0 - wdiff | [] [] [] [] [] | 14 - wget | [] [] [] [] [] [] [] [] | 24 - +----------------------------------------+ - 36 teams no pl pt pt_BR ru sk sl sv tr uk zh_TW - 67 domains 4 15 2 24 26 12 10 47 42 4 8 594 - - Some counters in the preceding matrix are higher than the number of -visible blocks let us expect. This is because a few extra PO files are -used for implementing regional variants of languages, or language -dialects. - - For a PO file in the matrix above to be effective, the package to -which it applies should also have been internationalized and -distributed as such by its maintainer. There might be an observable -lag between the mere existence a PO file and its wide availability in a -distribution. - - If July 2002 seems to be old, you may fetch a more recent copy of -this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date -matrix with full percentage details can be found at -`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'. - -Using `gettext' in new packages -=============================== - - If you are writing a freely available program and want to -internationalize it you are welcome to use GNU `gettext' in your -package. Of course you have to respect the GNU Library General Public -License which covers the use of the GNU `gettext' library. This means -in particular that even non-free programs can use `libintl' as a shared -library, whereas only free software can use `libintl' as a static -library or use modified versions of `libintl'. - - Once the sources are changed appropriately and the setup can handle -to use of `gettext' the only thing missing are the translations. The -Free Translation Project is also available for packages which are not -developed inside the GNU project. Therefore the information given above -applies also for every other Free Software Project. Contact -`translation@iro.umontreal.ca' to make the `.pot' files available to -the translation teams. - @@ -30,4 +30,4 @@ touch ChangeLog -aclocal -I m4 && autoheader && automake -a && autoconf +autopoint && aclocal -I m4 && autoheader && automake -a && autoconf diff --git a/configure.in b/configure.in index 044eec7..1a99915 100644 --- a/configure.in +++ b/configure.in @@ -26,11 +26,8 @@ AC_INIT(flex,2.5.11,help-flex@gnu.org) AC_CONFIG_SRCDIR(scan.l) AM_INIT_AUTOMAKE(flex,2.5.11) AM_CONFIG_HEADER(config.h:conf.in) - AM_GNU_GETTEXT([external]) -dnl if this worked, it'd be great -dnl We're using 0.11.3 as I see no reason to switch to a differently -broken gettext with a higher version number -dnl AM_GNU_GETTEXT_VERSION(0.11.3) + AM_GNU_GETTEXT +AM_GNU_GETTEXT_VERSION(0.11.5) AC_PROG_YACC AC_CHECK_PROG(BISON, bison, bison) diff --git a/m4/.cvsignore b/m4/.cvsignore deleted file mode 100644 index 282522d..0000000 --- a/m4/.cvsignore +++ /dev/null @@ -1,2 +0,0 @@ -Makefile -Makefile.in diff --git a/m4/Makefile.am b/m4/Makefile.am deleted file mode 100644 index 60cca4c..0000000 --- a/m4/Makefile.am +++ /dev/null @@ -1 +0,0 @@ -EXTRA_DIST = codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 progtest.m4 diff --git a/m4/codeset.m4 b/m4/codeset.m4 deleted file mode 100644 index 59535eb..0000000 --- a/m4/codeset.m4 +++ /dev/null @@ -1,23 +0,0 @@ -# codeset.m4 serial AM1 (gettext-0.10.40) -dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -AC_DEFUN([AM_LANGINFO_CODESET], -[ - AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset, - [AC_TRY_LINK([#include <langinfo.h>], - [char* cs = nl_langinfo(CODESET);], - am_cv_langinfo_codeset=yes, - am_cv_langinfo_codeset=no) - ]) - if test $am_cv_langinfo_codeset = yes; then - AC_DEFINE(HAVE_LANGINFO_CODESET, 1, - [Define if you have <langinfo.h> and nl_langinfo(CODESET).]) - fi -]) diff --git a/m4/gettext.m4 b/m4/gettext.m4 deleted file mode 100644 index 1c95d97..0000000 --- a/m4/gettext.m4 +++ /dev/null @@ -1,557 +0,0 @@ -# gettext.m4 serial 15 (gettext-0.11.3) -dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000. -dnl Bruno Haible <haible@clisp.cons.org>, 2000-2002. - -dnl Macro to add for using GNU gettext. - -dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). -dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The -dnl default (if it is not specified or empty) is 'no-libtool'. -dnl INTLSYMBOL should be 'external' for packages with no intl directory, -dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. -dnl If INTLSYMBOL is 'use-libtool', then a libtool library -dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, -dnl depending on --{enable,disable}-{shared,static} and on the presence of -dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library -dnl $(top_builddir)/intl/libintl.a will be created. -dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext -dnl implementations (in libc or libintl) without the ngettext() function -dnl will be ignored. -dnl INTLDIR is used to find the intl libraries. If empty, -dnl the value `$(top_builddir)/intl/' is used. -dnl -dnl The result of the configuration is one of three cases: -dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled -dnl and used. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 2) GNU gettext has been found in the system's C library. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 3) No internationalization, always use English msgid. -dnl Catalog format: none -dnl Catalog extension: none -dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. -dnl The use of .gmo is historical (it was needed to avoid overwriting the -dnl GNU format catalogs when building on a platform with an X/Open gettext), -dnl but we keep it in order not to force irrelevant filename changes on the -dnl maintainers. -dnl -AC_DEFUN([AM_GNU_GETTEXT], -[ - dnl Argument checking. - ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , - [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT -])])])])]) - ifelse([$2], [], , [ifelse([$2], [need-ngettext], , - [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT -])])]) - define(gt_included_intl, ifelse([$1], [external], [no], [yes])) - define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], [])) - - AC_REQUIRE([AM_PO_SUBDIRS])dnl - ifelse(gt_included_intl, yes, [ - AC_REQUIRE([AM_INTL_SUBDIR])dnl - ]) - - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Sometimes libintl requires libiconv, so first search for libiconv. - dnl Ideally we would do this search only after the - dnl if test "$USE_NLS" = "yes"; then - dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then - dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT - dnl the configure script would need to contain the same shell code - dnl again, outside any 'if'. There are two solutions: - dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. - dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. - dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not - dnl documented, we avoid it. - ifelse(gt_included_intl, yes, , [ - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - ]) - - AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE(nls, - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT($USE_NLS) - AC_SUBST(USE_NLS) - - ifelse(gt_included_intl, yes, [ - BUILD_INCLUDED_LIBINTL=no - USE_INCLUDED_LIBINTL=no - ]) - LIBINTL= - LTLIBINTL= - POSUB= - - dnl If we use NLS figure out what method - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - ifelse(gt_included_intl, yes, [ - AC_MSG_CHECKING([whether included gettext is requested]) - AC_ARG_WITH(included-gettext, - [ --with-included-gettext use the GNU gettext library included here], - nls_cv_force_use_gnu_gettext=$withval, - nls_cv_force_use_gnu_gettext=no) - AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) - - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - ]) - dnl User does not insist on using GNU NLS library. Figure out what - dnl to use. If GNU gettext is available we use this. Else we have - dnl to fall back to GNU NLS library. - - dnl Add a version number to the cache macros. - define([gt_api_version], ifelse([$2], [need-ngettext], 2, 1)) - define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc]) - define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl]) - - AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc, - [AC_TRY_LINK([#include <libintl.h> -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings;], - [bindtextdomain ("", ""); -return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings], - gt_cv_func_gnugettext_libc=yes, - gt_cv_func_gnugettext_libc=no)]) - - if test "$gt_cv_func_gnugettext_libc" != "yes"; then - dnl Sometimes libintl requires libiconv, so first search for libiconv. - ifelse(gt_included_intl, yes, , [ - AM_ICONV_LINK - ]) - dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL - dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) - dnl because that would add "-liconv" to LIBINTL and LTLIBINTL - dnl even if libiconv doesn't exist. - AC_LIB_LINKFLAGS_BODY([intl]) - AC_CACHE_CHECK([for GNU gettext in libintl], - gt_cv_func_gnugettext_libintl, - [gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - dnl Now see whether libintl exists and does not depend on libiconv. - AC_TRY_LINK([#include <libintl.h> -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias ();], - [bindtextdomain ("", ""); -return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], - gt_cv_func_gnugettext_libintl=yes, - gt_cv_func_gnugettext_libintl=no) - dnl Now see whether libintl exists and depends on libiconv. - if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - AC_TRY_LINK([#include <libintl.h> -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias ();], - [bindtextdomain ("", ""); -return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], - [LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - gt_cv_func_gnugettext_libintl=yes - ]) - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS"]) - fi - - dnl If an already present or preinstalled GNU gettext() is found, - dnl use it. But if this macro is used in GNU gettext, and GNU - dnl gettext is already preinstalled in libintl, we update this - dnl libintl. (Cf. the install rule in intl/Makefile.in.) - if test "$gt_cv_func_gnugettext_libc" = "yes" \ - || { test "$gt_cv_func_gnugettext_libintl" = "yes" \ - && test "$PACKAGE" != gettext; }; then - gt_use_preinstalled_gnugettext=yes - else - dnl Reset the values set by searching for libintl. - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - ifelse(gt_included_intl, yes, [ - if test "$gt_use_preinstalled_gnugettext" != "yes"; then - dnl GNU gettext is not found in the C library. - dnl Fall back on included GNU gettext library. - nls_cv_use_gnu_gettext=yes - fi - fi - - if test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions used to generate GNU NLS library. - INTLOBJS="\$(GETTOBJS)" - BUILD_INCLUDED_LIBINTL=yes - USE_INCLUDED_LIBINTL=yes - LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV" - LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV" - LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions to use GNU gettext tools. - CATOBJEXT=.gmo - fi - ]) - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - AC_DEFINE(ENABLE_NLS, 1, - [Define to 1 if translation of program messages to the user's native language - is requested.]) - else - USE_NLS=no - fi - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if test "$gt_cv_func_gnugettext_libintl" = "yes"; then - AC_MSG_CHECKING([how to link with libintl]) - AC_MSG_RESULT([$LIBINTL]) - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) - fi - - dnl For backward compatibility. Some packages may be using this. - AC_DEFINE(HAVE_GETTEXT, 1, - [Define if the GNU gettext() function is already present or preinstalled.]) - AC_DEFINE(HAVE_DCGETTEXT, 1, - [Define if the GNU dcgettext() function is already present or preinstalled.]) - fi - - dnl We need to process the po/ directory. - POSUB=po - fi - - ifelse(gt_included_intl, yes, [ - dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL - dnl to 'yes' because some of the testsuite requires it. - if test "$PACKAGE" = gettext; then - BUILD_INCLUDED_LIBINTL=yes - fi - - dnl Make all variables we use known to autoconf. - AC_SUBST(BUILD_INCLUDED_LIBINTL) - AC_SUBST(USE_INCLUDED_LIBINTL) - AC_SUBST(CATOBJEXT) - AC_SUBST(INTLOBJS) - - dnl For backward compatibility. Some configure.ins may be using this. - nls_cv_header_intl= - nls_cv_header_libgt= - - dnl For backward compatibility. Some Makefiles may be using this. - DATADIRNAME=share - AC_SUBST(DATADIRNAME) - - dnl For backward compatibility. Some Makefiles may be using this. - INSTOBJEXT=.mo - AC_SUBST(INSTOBJEXT) - - dnl For backward compatibility. Some Makefiles may be using this. - GENCAT=gencat - AC_SUBST(GENCAT) - - dnl Enable libtool support if the surrounding package wishes it. - INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix - AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX) - ]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLLIBS="$LIBINTL" - AC_SUBST(INTLLIBS) - - dnl Make all documented variables known to autoconf. - AC_SUBST(LIBINTL) - AC_SUBST(LTLIBINTL) - AC_SUBST(POSUB) -]) - - -dnl Checks for all prerequisites of the po subdirectory, -dnl except for USE_NLS. -AC_DEFUN([AM_PO_SUBDIRS], -[ - AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl - AC_REQUIRE([AM_MKINSTALLDIRS])dnl - - dnl Perform the following tests also if --disable-nls has been given, - dnl because they are needed for "make dist" to work. - - dnl Search for GNU msgfmt in the PATH. - dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. - dnl The second test excludes FreeBSD msgfmt. - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - - dnl Search for GNU xgettext 0.11 or newer in the PATH. - dnl The first test excludes Solaris xgettext and early GNU xgettext versions. - dnl The second test excludes FreeBSD xgettext. - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [$ac_dir/$ac_word --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - dnl Remove leftover from FreeBSD xgettext call. - rm -f messages.po - - dnl Search for GNU msgmerge 0.11 or newer in the PATH. - AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, - [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :) - - dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. - dnl Test whether we really found GNU msgfmt. - if test "$GMSGFMT" != ":"; then - dnl If it is no GNU msgfmt we define it as : so that the - dnl Makefiles still can work. - if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 && - (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - : ; - else - GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'` - AC_MSG_RESULT( - [found $GMSGFMT program is not GNU msgfmt; ignore it]) - GMSGFMT=":" - fi - fi - - dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 && - (if $XGETTEXT --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - : ; - else - AC_MSG_RESULT( - [found xgettext program is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - dnl Remove leftover from FreeBSD xgettext call. - rm -f messages.po - fi - - AC_OUTPUT_COMMANDS([ - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assigment from automake. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - fi - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - GMOFILES= - UPDATEPOFILES= - DUMMYPOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done], - [# Capture the value of obsolete $ALL_LINGUAS because we need it to compute - # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it - # from automake. - eval 'ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - ]) -]) - - -dnl Checks for all prerequisites of the intl subdirectory, -dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS, -dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL. -AC_DEFUN([AM_INTL_SUBDIR], -[ - AC_REQUIRE([AC_PROG_INSTALL])dnl - AC_REQUIRE([AM_MKINSTALLDIRS])dnl - AC_REQUIRE([AC_PROG_CC])dnl - AC_REQUIRE([AC_CANONICAL_HOST])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_ISC_POSIX])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_C_CONST])dnl - AC_REQUIRE([AC_C_INLINE])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - AC_REQUIRE([jm_GLIBC21])dnl - AC_REQUIRE([gt_INTDIV0])dnl - - AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \ -stdlib.h string.h unistd.h sys/param.h]) - AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \ -geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \ -strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next]) - - AM_ICONV - AM_LANGINFO_CODESET - if test $ac_cv_header_locale_h = yes; then - AM_LC_MESSAGES - fi - - dnl intl/plural.c is generated from intl/plural.y. It requires bison, - dnl because plural.y uses bison specific features. It requires at least - dnl bison-1.26 because earlier versions generate a plural.c that doesn't - dnl compile. - dnl bison is only needed for the maintainer (who touches plural.y). But in - dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put - dnl the rule in general Makefile. Now, some people carelessly touch the - dnl files or have a broken "make" program, hence the plural.c rule will - dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not - dnl present or too old. - AC_CHECK_PROGS([INTLBISON], [bison]) - if test -z "$INTLBISON"; then - ac_verc_fail=yes - else - dnl Found it, now check the version. - AC_MSG_CHECKING([version of bison]) -changequote(<<,>>)dnl - ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'` - case $ac_prog_version in - '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;; - 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*) -changequote([,])dnl - ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;; - *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;; - esac - AC_MSG_RESULT([$ac_prog_version]) - fi - if test $ac_verc_fail = yes; then - INTLBISON=: - fi -]) - - -AC_DEFUN([AM_MKINSTALLDIRS], -[ - dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly - dnl find the mkinstalldirs script in another subdir but $(top_srcdir). - dnl Try to locate is. - MKINSTALLDIRS= - if test -n "$ac_aux_dir"; then - MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" - fi - if test -z "$MKINSTALLDIRS"; then - MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" - fi - AC_SUBST(MKINSTALLDIRS) -]) diff --git a/m4/glibc21.m4 b/m4/glibc21.m4 deleted file mode 100644 index 9c9f3db..0000000 --- a/m4/glibc21.m4 +++ /dev/null @@ -1,32 +0,0 @@ -# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40) -dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -# Test for the GNU C Library, version 2.1 or newer. -# From Bruno Haible. - -AC_DEFUN([jm_GLIBC21], - [ - AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer, - ac_cv_gnu_library_2_1, - [AC_EGREP_CPP([Lucky GNU user], - [ -#include <features.h> -#ifdef __GNU_LIBRARY__ - #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2) - Lucky GNU user - #endif -#endif - ], - ac_cv_gnu_library_2_1=yes, - ac_cv_gnu_library_2_1=no) - ] - ) - AC_SUBST(GLIBC21) - GLIBC21="$ac_cv_gnu_library_2_1" - ] -) diff --git a/m4/iconv.m4 b/m4/iconv.m4 deleted file mode 100644 index c5f3579..0000000 --- a/m4/iconv.m4 +++ /dev/null @@ -1,103 +0,0 @@ -# iconv.m4 serial AM4 (gettext-0.11.3) -dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], -[ - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([iconv]) -]) - -AC_DEFUN([AM_ICONV_LINK], -[ - dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and - dnl those with the standalone portable GNU libiconv installed). - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - - dnl Add $INCICONV to CPPFLAGS before performing the following checks, - dnl because if the user has installed libiconv and not disabled its use - dnl via --without-libiconv-prefix, he wants to use it. The first - dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. - am_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) - - AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [ - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - AC_TRY_LINK([#include <stdlib.h> -#include <iconv.h>], - [iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);], - am_cv_func_iconv=yes) - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - AC_TRY_LINK([#include <stdlib.h> -#include <iconv.h>], - [iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);], - am_cv_lib_iconv=yes - am_cv_func_iconv=yes) - LIBS="$am_save_LIBS" - fi - ]) - if test "$am_cv_func_iconv" = yes; then - AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.]) - fi - if test "$am_cv_lib_iconv" = yes; then - AC_MSG_CHECKING([how to link with libiconv]) - AC_MSG_RESULT([$LIBICONV]) - else - dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV - dnl either. - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - AC_SUBST(LIBICONV) - AC_SUBST(LTLIBICONV) -]) - -AC_DEFUN([AM_ICONV], -[ - AM_ICONV_LINK - if test "$am_cv_func_iconv" = yes; then - AC_MSG_CHECKING([for iconv declaration]) - AC_CACHE_VAL(am_cv_proto_iconv, [ - AC_TRY_COMPILE([ -#include <stdlib.h> -#include <iconv.h> -extern -#ifdef __cplusplus -"C" -#endif -#if defined(__STDC__) || defined(__cplusplus) -size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); -#else -size_t iconv(); -#endif -], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const") - am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) - am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` - AC_MSG_RESULT([$]{ac_t:- - }[$]am_cv_proto_iconv) - AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1, - [Define as const if the declaration of iconv() needs const.]) - fi -]) diff --git a/m4/isc-posix.m4 b/m4/isc-posix.m4 deleted file mode 100644 index 1319dd1..0000000 --- a/m4/isc-posix.m4 +++ /dev/null @@ -1,26 +0,0 @@ -# isc-posix.m4 serial 2 (gettext-0.11.2) -dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -# This file is not needed with autoconf-2.53 and newer. Remove it in 2005. - -# This test replaces the one in autoconf. -# Currently this macro should have the same name as the autoconf macro -# because gettext's gettext.m4 (distributed in the automake package) -# still uses it. Otherwise, the use in gettext.m4 makes autoheader -# give these diagnostics: -# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX -# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX - -undefine([AC_ISC_POSIX]) - -AC_DEFUN([AC_ISC_POSIX], - [ - dnl This test replaces the obsolescent AC_ISC_POSIX kludge. - AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) - ] -) diff --git a/m4/lcmessage.m4 b/m4/lcmessage.m4 deleted file mode 100644 index ffd4008..0000000 --- a/m4/lcmessage.m4 +++ /dev/null @@ -1,32 +0,0 @@ -# lcmessage.m4 serial 3 (gettext-0.11.3) -dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper <drepper@cygnus.com>, 1995. - -# Check whether LC_MESSAGES is available in <locale.h>. - -AC_DEFUN([AM_LC_MESSAGES], -[ - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES, 1, - [Define if your <locale.h> file defines LC_MESSAGES.]) - fi -]) diff --git a/m4/lib-ld.m4 b/m4/lib-ld.m4 deleted file mode 100644 index ddb5732..0000000 --- a/m4/lib-ld.m4 +++ /dev/null @@ -1,97 +0,0 @@ -# lib-ld.m4 serial 1 (gettext-0.11) -dnl Copyright (C) 1996-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl Subroutines of libtool.m4, -dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision -dnl with libtool.m4. - -dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. -AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then - acl_cv_prog_gnu_ld=yes -else - acl_cv_prog_gnu_ld=no -fi]) -with_gnu_ld=$acl_cv_prog_gnu_ld -]) - -dnl From libtool-1.4. Sets the variable LD. -AC_DEFUN([AC_LIB_PROG_LD], -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]* | [A-Za-z]:[\\/]*)] - [re_direlt='/[^/][^/]*/\.\./'] - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(acl_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - acl_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$acl_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_LIB_PROG_LD_GNU -]) diff --git a/m4/lib-link.m4 b/m4/lib-link.m4 deleted file mode 100644 index 6b94251..0000000 --- a/m4/lib-link.m4 +++ /dev/null @@ -1,554 +0,0 @@ -# lib-link.m4 serial 3 (gettext-0.11.3) -dnl Copyright (C) 2001-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and -dnl augments the CPPFLAGS variable. -AC_DEFUN([AC_LIB_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - define([Name],[translit([$1],[./-], [___])]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - ac_cv_lib[]Name[]_libs="$LIB[]NAME" - ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" - ac_cv_lib[]Name[]_cppflags="$INC[]NAME" - ]) - LIB[]NAME="$ac_cv_lib[]Name[]_libs" - LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" - INC[]NAME="$ac_cv_lib[]Name[]_cppflags" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the - dnl results of this search when this library appears as a dependency. - HAVE_LIB[]NAME=yes - undefine([Name]) - undefine([NAME]) -]) - -dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) -dnl searches for libname and the libraries corresponding to explicit and -dnl implicit dependencies, together with the specified include files and -dnl the ability to compile and link the specified testcode. If found, it -dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and -dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and -dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs -dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. -AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - define([Name],[translit([$1],[./-], [___])]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - - dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - - dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, - dnl because if the user has installed lib[]Name and not disabled its use - dnl via --without-lib[]Name-prefix, he wants to use it. - ac_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - - AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ - ac_save_LIBS="$LIBS" - LIBS="$LIBS $LIB[]NAME" - AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) - LIBS="$ac_save_LIBS" - ]) - if test "$ac_cv_lib[]Name" = yes; then - HAVE_LIB[]NAME=yes - AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) - AC_MSG_CHECKING([how to link with lib[]$1]) - AC_MSG_RESULT([$LIB[]NAME]) - else - HAVE_LIB[]NAME=no - dnl If $LIB[]NAME didn't lead to a usable library, we don't need - dnl $INC[]NAME either. - CPPFLAGS="$ac_save_CPPFLAGS" - LIB[]NAME= - LTLIB[]NAME= - fi - AC_SUBST([HAVE_LIB]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - undefine([Name]) - undefine([NAME]) -]) - -dnl Determine the platform dependent parameters needed to use rpath: -dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, -dnl hardcode_direct, hardcode_minus_L, -dnl sys_lib_search_path_spec, sys_lib_dlsearch_path_spec. -AC_DEFUN([AC_LIB_RPATH], -[ - AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS - AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld - AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host - AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ]) - wl="$acl_cv_wl" - libext="$acl_cv_libext" - shlibext="$acl_cv_shlibext" - hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - hardcode_direct="$acl_cv_hardcode_direct" - hardcode_minus_L="$acl_cv_hardcode_minus_L" - sys_lib_search_path_spec="$acl_cv_sys_lib_search_path_spec" - sys_lib_dlsearch_path_spec="$acl_cv_sys_lib_dlsearch_path_spec" - dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE(rpath, - [ --disable-rpath do not hardcode runtime library paths], - :, enable_rpath=yes) -]) - -dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. -AC_DEFUN([AC_LIB_LINKFLAGS_BODY], -[ - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_ARG_WITH([lib$1-prefix], -[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib - --without-lib$1-prefix don't search for lib$1 in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/lib" - fi - fi -]) - dnl Search the library and its dependencies in $additional_libdir and - dnl $LDFLAGS. Using breadth-first-seach. - LIB[]NAME= - LTLIB[]NAME= - INC[]NAME= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='$1 $2' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - dnl See if it was already located by an earlier AC_LIB_LINKFLAGS - dnl or AC_LIB_HAVE_LINKFLAGS call. - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" - else - dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined - dnl that this library doesn't exist. So just drop it. - : - fi - else - dnl Search the library lib$name in $additional_libdir and $LDFLAGS - dnl and the already constructed $LIBNAME/$LTLIBNAME. - found_dir= - found_la= - found_so= - found_a= - if test $use_additional = yes; then - if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then - found_dir="$additional_libdir" - found_so="$additional_libdir/lib$name.$shlibext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" - fi - else - if test -f "$additional_libdir/lib$name.$libext"; then - found_dir="$additional_libdir" - found_a="$additional_libdir/lib$name.$libext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" - fi - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then - found_dir="$dir" - found_so="$dir/lib$name.$shlibext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" - fi - else - if test -f "$dir/lib$name.$libext"; then - found_dir="$dir" - found_a="$dir/lib$name.$libext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" - fi - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - dnl Found the library. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - dnl Linking with a shared library. We attempt to hardcode its - dnl directory into the executable's runpath, unless it's the - dnl standard /usr/lib. - if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then - dnl No hardcoding is needed. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - dnl The hardcoding into $LIBNAME is system dependent. - if test "$hardcode_direct" = yes; then - dnl Using DIR/libNAME.so during linking hardcodes DIR into the - dnl resulting binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - dnl Rely on "-L$found_dir". - dnl But don't add it if it's already contained in the LDFLAGS - dnl or the already constructed $LIBNAME - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" - fi - if test "$hardcode_minus_L" != no; then - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH - dnl here, because this doesn't fit in flags passed to the - dnl compiler. So give up. No hardcoding. This affects only - dnl very old systems. - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - dnl Linking with a static library. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" - else - dnl We shouldn't come here, but anyway it's good to have a - dnl fallback. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" - fi - fi - dnl Assume the include files are nearby. - additional_includedir= - case "$found_dir" in - */lib | */lib/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - dnl Potentially add $additional_includedir to $INCNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's /usr/local/include and we are using GCC on Linux, - dnl 3. if it's already present in $CPPFLAGS or the already - dnl constructed $INCNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INC[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $INCNAME. - INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - dnl Look for dependencies. - if test -n "$found_la"; then - dnl Read the .la file. It defines the variables - dnl dlname, library_names, old_library, dependency_libs, current, - dnl age, revision, installed, dlopen, dlpreopen, libdir. - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - dnl We use only dependency_libs. - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's /usr/local/lib and we are using GCC on Linux, - dnl 3. if it's already present in $LDFLAGS or the already - dnl constructed $LIBNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/lib"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/lib"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LIBNAME. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LTLIBNAME. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dnl Handle this in the next round. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - dnl Handle this in the next round. Throw away the .la's - dnl directory; it is already contained in a preceding -L - dnl option. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - dnl Most likely an immediate library name. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" - ;; - esac - done - fi - else - dnl Didn't find the library; assume it is in the system directories - dnl known to the linker and runtime loader. (All the system - dnl directories known to the linker should also be known to the - dnl runtime loader, otherwise the system is severely misconfigured.) - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user must - dnl pass all path elements in one option. We can arrange that for a - dnl single library, but not when more than one $LIBNAMEs are used. - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" - done - dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - else - dnl The -rpath options are cumulative. - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - dnl When using libtool, the option that works for both libraries and - dnl executables is -R. The -R options are cumulative. - for found_dir in $ltrpathdirs; do - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" - done - fi -]) - -dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, -dnl unless already present in VAR. -dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes -dnl contains two or three consecutive elements that belong together. -AC_DEFUN([AC_LIB_APPENDTOVAR], -[ - for element in [$2]; do - haveit= - for x in $[$1]; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - [$1]="${[$1]}${[$1]:+ }$element" - fi - done -]) diff --git a/m4/lib-prefix.m4 b/m4/lib-prefix.m4 deleted file mode 100644 index b8b79ab..0000000 --- a/m4/lib-prefix.m4 +++ /dev/null @@ -1,148 +0,0 @@ -# lib-prefix.m4 serial 1 (gettext-0.11) -dnl Copyright (C) 2001-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed -dnl to access previously installed libraries. The basic assumption is that -dnl a user will want packages to use other packages he previously installed -dnl with the same --prefix option. -dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate -dnl libraries, but is otherwise very convenient. -AC_DEFUN([AC_LIB_PREFIX], -[ - AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_ARG_WITH([lib-prefix], -[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib - --without-lib-prefix don't search for libraries in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/lib" - fi - fi -]) - if test $use_additional = yes; then - dnl Potentially add $additional_includedir to $CPPFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's already present in $CPPFLAGS, - dnl 3. if it's /usr/local/include and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - for x in $CPPFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $CPPFLAGS. - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" - fi - fi - fi - fi - dnl Potentially add $additional_libdir to $LDFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's already present in $LDFLAGS, - dnl 3. if it's /usr/local/lib and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/lib"; then - haveit= - for x in $LDFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/lib"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LDFLAGS. - LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" - fi - fi - fi - fi - fi -]) - -dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, -dnl acl_final_exec_prefix, containing the values to which $prefix and -dnl $exec_prefix will expand at the end of the configure script. -AC_DEFUN([AC_LIB_PREPARE_PREFIX], -[ - dnl Unfortunately, prefix and exec_prefix get only finally determined - dnl at the end of configure. - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the -dnl variables prefix and exec_prefix bound to the values they will have -dnl at the end of the configure script. -AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], -[ - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - $1 - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" -]) diff --git a/m4/progtest.m4 b/m4/progtest.m4 deleted file mode 100644 index 443c8e3..0000000 --- a/m4/progtest.m4 +++ /dev/null @@ -1,59 +0,0 @@ -# progtest.m4 serial 2 (gettext-0.10.40) -dnl Copyright (C) 1996-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper <drepper@cygnus.com>, 1996. - -# Search path for a program which passes the given test. - -dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST], -[# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - /*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in ifelse([$5], , $PATH, [$5]); do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) |