From 9c7be85eee749f620d722c8e0382bad3ed34c1b8 Mon Sep 17 00:00:00 2001 From: James Godfrey-Kittle Date: Tue, 14 Apr 2015 17:30:59 -0700 Subject: Remove freetype-py from repo, refer to GitHub. --- third_party/freetype-py/doc/Makefile | 130 ------ third_party/freetype-py/doc/_static/G.png | Bin 25511 -> 0 bytes third_party/freetype-py/doc/_static/S.png | Bin 55986 -> 0 bytes third_party/freetype-py/doc/_static/agg-trick.png | Bin 98432 -> 0 bytes .../freetype-py/doc/_static/hello-world.png | Bin 8697 -> 0 bytes third_party/freetype-py/doc/_static/opengl.png | Bin 80186 -> 0 bytes third_party/freetype-py/doc/_static/outline.png | Bin 25701 -> 0 bytes third_party/freetype-py/doc/_static/wordle.png | Bin 119705 -> 0 bytes third_party/freetype-py/doc/api.rst | 20 - third_party/freetype-py/doc/bbox.rst | 6 - third_party/freetype-py/doc/bitmap.rst | 6 - third_party/freetype-py/doc/bitmap_glyph.rst | 6 - third_party/freetype-py/doc/bitmap_size.rst | 6 - third_party/freetype-py/doc/charmap.rst | 6 - third_party/freetype-py/doc/conf.py | 224 ---------- third_party/freetype-py/doc/constants.rst | 31 -- third_party/freetype-py/doc/face.rst | 6 - third_party/freetype-py/doc/ft_encodings.rst | 83 ---- third_party/freetype-py/doc/ft_face_flags.rst | 111 ----- third_party/freetype-py/doc/ft_fstypes.rst | 45 -- .../freetype-py/doc/ft_glyph_bbox_modes.rst | 25 -- third_party/freetype-py/doc/ft_glyph_formats.rst | 36 -- third_party/freetype-py/doc/ft_kerning_modes.rst | 21 - third_party/freetype-py/doc/ft_lcd_filters.rst | 36 -- third_party/freetype-py/doc/ft_load_flags.rst | 131 ------ third_party/freetype-py/doc/ft_load_targets.rst | 48 -- third_party/freetype-py/doc/ft_open_modes.rst | 31 -- third_party/freetype-py/doc/ft_outline_flags.rst | 69 --- third_party/freetype-py/doc/ft_pixel_modes.rst | 55 --- third_party/freetype-py/doc/ft_render_modes.rst | 45 -- third_party/freetype-py/doc/ft_stroker_borders.rst | 27 -- .../freetype-py/doc/ft_stroker_linecaps.rst | 21 - .../freetype-py/doc/ft_stroker_linejoins.rst | 24 - third_party/freetype-py/doc/ft_style_flags.rst | 16 - third_party/freetype-py/doc/glyph.rst | 6 - third_party/freetype-py/doc/glyph_slot.rst | 6 - third_party/freetype-py/doc/index.rst | 26 -- third_party/freetype-py/doc/introduction.rst | 53 --- third_party/freetype-py/doc/license.rst | 29 -- third_party/freetype-py/doc/make.bat | 170 ------- third_party/freetype-py/doc/make_enums.py | 48 -- third_party/freetype-py/doc/notes.rst | 44 -- third_party/freetype-py/doc/outline.rst | 6 - third_party/freetype-py/doc/screenshots.rst | 34 -- third_party/freetype-py/doc/sfnt_name.rst | 6 - third_party/freetype-py/doc/size_metrics.rst | 6 - third_party/freetype-py/doc/stroker.rst | 6 - third_party/freetype-py/doc/tt_adobe_ids.rst | 25 -- third_party/freetype-py/doc/tt_apple_ids.rst | 37 -- third_party/freetype-py/doc/tt_mac_ids.rst | 74 --- third_party/freetype-py/doc/tt_mac_langids.rst | 246 ---------- third_party/freetype-py/doc/tt_ms_ids.rst | 49 -- third_party/freetype-py/doc/tt_ms_langids.rst | 496 --------------------- third_party/freetype-py/doc/tt_name_ids.rst | 50 --- third_party/freetype-py/doc/tt_platforms.rst | 47 -- third_party/freetype-py/doc/usage.rst | 12 - 56 files changed, 2741 deletions(-) delete mode 100644 third_party/freetype-py/doc/Makefile delete mode 100644 third_party/freetype-py/doc/_static/G.png delete mode 100644 third_party/freetype-py/doc/_static/S.png delete mode 100644 third_party/freetype-py/doc/_static/agg-trick.png delete mode 100644 third_party/freetype-py/doc/_static/hello-world.png delete mode 100644 third_party/freetype-py/doc/_static/opengl.png delete mode 100644 third_party/freetype-py/doc/_static/outline.png delete mode 100644 third_party/freetype-py/doc/_static/wordle.png delete mode 100644 third_party/freetype-py/doc/api.rst delete mode 100644 third_party/freetype-py/doc/bbox.rst delete mode 100644 third_party/freetype-py/doc/bitmap.rst delete mode 100644 third_party/freetype-py/doc/bitmap_glyph.rst delete mode 100644 third_party/freetype-py/doc/bitmap_size.rst delete mode 100644 third_party/freetype-py/doc/charmap.rst delete mode 100644 third_party/freetype-py/doc/conf.py delete mode 100644 third_party/freetype-py/doc/constants.rst delete mode 100644 third_party/freetype-py/doc/face.rst delete mode 100644 third_party/freetype-py/doc/ft_encodings.rst delete mode 100644 third_party/freetype-py/doc/ft_face_flags.rst delete mode 100644 third_party/freetype-py/doc/ft_fstypes.rst delete mode 100644 third_party/freetype-py/doc/ft_glyph_bbox_modes.rst delete mode 100644 third_party/freetype-py/doc/ft_glyph_formats.rst delete mode 100644 third_party/freetype-py/doc/ft_kerning_modes.rst delete mode 100644 third_party/freetype-py/doc/ft_lcd_filters.rst delete mode 100644 third_party/freetype-py/doc/ft_load_flags.rst delete mode 100644 third_party/freetype-py/doc/ft_load_targets.rst delete mode 100644 third_party/freetype-py/doc/ft_open_modes.rst delete mode 100644 third_party/freetype-py/doc/ft_outline_flags.rst delete mode 100644 third_party/freetype-py/doc/ft_pixel_modes.rst delete mode 100644 third_party/freetype-py/doc/ft_render_modes.rst delete mode 100644 third_party/freetype-py/doc/ft_stroker_borders.rst delete mode 100644 third_party/freetype-py/doc/ft_stroker_linecaps.rst delete mode 100644 third_party/freetype-py/doc/ft_stroker_linejoins.rst delete mode 100644 third_party/freetype-py/doc/ft_style_flags.rst delete mode 100644 third_party/freetype-py/doc/glyph.rst delete mode 100644 third_party/freetype-py/doc/glyph_slot.rst delete mode 100644 third_party/freetype-py/doc/index.rst delete mode 100644 third_party/freetype-py/doc/introduction.rst delete mode 100644 third_party/freetype-py/doc/license.rst delete mode 100644 third_party/freetype-py/doc/make.bat delete mode 100644 third_party/freetype-py/doc/make_enums.py delete mode 100644 third_party/freetype-py/doc/notes.rst delete mode 100644 third_party/freetype-py/doc/outline.rst delete mode 100644 third_party/freetype-py/doc/screenshots.rst delete mode 100644 third_party/freetype-py/doc/sfnt_name.rst delete mode 100644 third_party/freetype-py/doc/size_metrics.rst delete mode 100644 third_party/freetype-py/doc/stroker.rst delete mode 100644 third_party/freetype-py/doc/tt_adobe_ids.rst delete mode 100644 third_party/freetype-py/doc/tt_apple_ids.rst delete mode 100644 third_party/freetype-py/doc/tt_mac_ids.rst delete mode 100644 third_party/freetype-py/doc/tt_mac_langids.rst delete mode 100644 third_party/freetype-py/doc/tt_ms_ids.rst delete mode 100644 third_party/freetype-py/doc/tt_ms_langids.rst delete mode 100644 third_party/freetype-py/doc/tt_name_ids.rst delete mode 100644 third_party/freetype-py/doc/tt_platforms.rst delete mode 100644 third_party/freetype-py/doc/usage.rst (limited to 'third_party/freetype-py/doc') diff --git a/third_party/freetype-py/doc/Makefile b/third_party/freetype-py/doc/Makefile deleted file mode 100644 index 00f9c4e..0000000 --- a/third_party/freetype-py/doc/Makefile +++ /dev/null @@ -1,130 +0,0 @@ -# Makefile for Sphinx documentation -# - -# You can set these variables from the command line. -SPHINXOPTS = -SPHINXBUILD = sphinx-build -PAPER = -BUILDDIR = _build - -# Internal variables. -PAPEROPT_a4 = -D latex_paper_size=a4 -PAPEROPT_letter = -D latex_paper_size=letter -ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . - -.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest - -help: - @echo "Please use \`make ' where is one of" - @echo " html to make standalone HTML files" - @echo " dirhtml to make HTML files named index.html in directories" - @echo " singlehtml to make a single large HTML file" - @echo " pickle to make pickle files" - @echo " json to make JSON files" - @echo " htmlhelp to make HTML files and a HTML help project" - @echo " qthelp to make HTML files and a qthelp project" - @echo " devhelp to make HTML files and a Devhelp project" - @echo " epub to make an epub" - @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" - @echo " latexpdf to make LaTeX files and run them through pdflatex" - @echo " text to make text files" - @echo " man to make manual pages" - @echo " changes to make an overview of all changed/added/deprecated items" - @echo " linkcheck to check all external links for integrity" - @echo " doctest to run all doctests embedded in the documentation (if enabled)" - -clean: - -rm -rf $(BUILDDIR)/* - -html: - $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html - @echo - @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." - -dirhtml: - $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml - @echo - @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." - -singlehtml: - $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml - @echo - @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." - -pickle: - $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle - @echo - @echo "Build finished; now you can process the pickle files." - -json: - $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json - @echo - @echo "Build finished; now you can process the JSON files." - -htmlhelp: - $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp - @echo - @echo "Build finished; now you can run HTML Help Workshop with the" \ - ".hhp project file in $(BUILDDIR)/htmlhelp." - -qthelp: - $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp - @echo - @echo "Build finished; now you can run "qcollectiongenerator" with the" \ - ".qhcp project file in $(BUILDDIR)/qthelp, like this:" - @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/FreetypePython.qhcp" - @echo "To view the help file:" - @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/FreetypePython.qhc" - -devhelp: - $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp - @echo - @echo "Build finished." - @echo "To view the help file:" - @echo "# mkdir -p $$HOME/.local/share/devhelp/FreetypePython" - @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/FreetypePython" - @echo "# devhelp" - -epub: - $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub - @echo - @echo "Build finished. The epub file is in $(BUILDDIR)/epub." - -latex: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex - @echo - @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." - @echo "Run \`make' in that directory to run these through (pdf)latex" \ - "(use \`make latexpdf' here to do that automatically)." - -latexpdf: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex - @echo "Running LaTeX files through pdflatex..." - make -C $(BUILDDIR)/latex all-pdf - @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." - -text: - $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text - @echo - @echo "Build finished. The text files are in $(BUILDDIR)/text." - -man: - $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man - @echo - @echo "Build finished. The manual pages are in $(BUILDDIR)/man." - -changes: - $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes - @echo - @echo "The overview file is in $(BUILDDIR)/changes." - -linkcheck: - $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck - @echo - @echo "Link check complete; look for any errors in the above output " \ - "or in $(BUILDDIR)/linkcheck/output.txt." - -doctest: - $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest - @echo "Testing of doctests in the sources finished, look at the " \ - "results in $(BUILDDIR)/doctest/output.txt." diff --git a/third_party/freetype-py/doc/_static/G.png b/third_party/freetype-py/doc/_static/G.png deleted file mode 100644 index 80aaa3d..0000000 Binary files a/third_party/freetype-py/doc/_static/G.png and /dev/null differ diff --git a/third_party/freetype-py/doc/_static/S.png b/third_party/freetype-py/doc/_static/S.png deleted file mode 100644 index 81ea28d..0000000 Binary files a/third_party/freetype-py/doc/_static/S.png and /dev/null differ diff --git a/third_party/freetype-py/doc/_static/agg-trick.png b/third_party/freetype-py/doc/_static/agg-trick.png deleted file mode 100644 index aa29b33..0000000 Binary files a/third_party/freetype-py/doc/_static/agg-trick.png and /dev/null differ diff --git a/third_party/freetype-py/doc/_static/hello-world.png b/third_party/freetype-py/doc/_static/hello-world.png deleted file mode 100644 index f62d282..0000000 Binary files a/third_party/freetype-py/doc/_static/hello-world.png and /dev/null differ diff --git a/third_party/freetype-py/doc/_static/opengl.png b/third_party/freetype-py/doc/_static/opengl.png deleted file mode 100644 index 816d4da..0000000 Binary files a/third_party/freetype-py/doc/_static/opengl.png and /dev/null differ diff --git a/third_party/freetype-py/doc/_static/outline.png b/third_party/freetype-py/doc/_static/outline.png deleted file mode 100644 index 1ed76a1..0000000 Binary files a/third_party/freetype-py/doc/_static/outline.png and /dev/null differ diff --git a/third_party/freetype-py/doc/_static/wordle.png b/third_party/freetype-py/doc/_static/wordle.png deleted file mode 100644 index 216a076..0000000 Binary files a/third_party/freetype-py/doc/_static/wordle.png and /dev/null differ diff --git a/third_party/freetype-py/doc/api.rst b/third_party/freetype-py/doc/api.rst deleted file mode 100644 index 74588eb..0000000 --- a/third_party/freetype-py/doc/api.rst +++ /dev/null @@ -1,20 +0,0 @@ -=== -API -=== - -.. toctree:: - :maxdepth: 2 - - face.rst - bbox.rst - size_metrics.rst - bitmap_size.rst - bitmap.rst - charmap.rst - outline.rst - glyph.rst - bitmap_glyph.rst - glyph_slot.rst - sfnt_name.rst - stroker.rst - constants.rst diff --git a/third_party/freetype-py/doc/bbox.rst b/third_party/freetype-py/doc/bbox.rst deleted file mode 100644 index 89ce86c..0000000 --- a/third_party/freetype-py/doc/bbox.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -BBox -==== -.. autoclass:: BBox - :members: diff --git a/third_party/freetype-py/doc/bitmap.rst b/third_party/freetype-py/doc/bitmap.rst deleted file mode 100644 index c6ef17e..0000000 --- a/third_party/freetype-py/doc/bitmap.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -Bitmap -====== -.. autoclass:: Bitmap - :members: diff --git a/third_party/freetype-py/doc/bitmap_glyph.rst b/third_party/freetype-py/doc/bitmap_glyph.rst deleted file mode 100644 index e73e642..0000000 --- a/third_party/freetype-py/doc/bitmap_glyph.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -Bitmap glyph -============ -.. autoclass:: BitmapGlyph - :members: diff --git a/third_party/freetype-py/doc/bitmap_size.rst b/third_party/freetype-py/doc/bitmap_size.rst deleted file mode 100644 index f4f1793..0000000 --- a/third_party/freetype-py/doc/bitmap_size.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -Bitmap size -=========== -.. autoclass:: BitmapSize - :members: diff --git a/third_party/freetype-py/doc/charmap.rst b/third_party/freetype-py/doc/charmap.rst deleted file mode 100644 index 0e61c0f..0000000 --- a/third_party/freetype-py/doc/charmap.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -Charmap -======= -.. autoclass:: Charmap - :members: diff --git a/third_party/freetype-py/doc/conf.py b/third_party/freetype-py/doc/conf.py deleted file mode 100644 index ca1888b..0000000 --- a/third_party/freetype-py/doc/conf.py +++ /dev/null @@ -1,224 +0,0 @@ -# -*- coding: utf-8 -*- -# -# Freetype/Python documentation build configuration file, created by -# sphinx-quickstart on Wed Nov 9 16:29:54 2011. -# -# This file is execfile()d with the current directory set to its containing dir. -# -# Note that not all possible configuration values are present in this -# autogenerated file. -# -# All configuration values have a default; values that are commented out -# serve to show the default. - -import sys, os - -# If extensions (or modules to document with autodoc) are in another directory, -# add these directories to sys.path here. If the directory is relative to the -# documentation root, use os.path.abspath to make it absolute, like shown here. -#sys.path.insert(0, os.path.abspath('.')) - -# -- General configuration ----------------------------------------------------- - -# If your documentation needs a minimal Sphinx version, state it here. -#needs_sphinx = '1.0' - -# Add any Sphinx extension module names here, as strings. They can be extensions -# coming with Sphinx (named 'sphinx.ext.*') or your custom ones. -extensions = ['sphinx.ext.autodoc'] - -# Add any paths that contain templates here, relative to this directory. -templates_path = ['_templates'] - -# The suffix of source filenames. -source_suffix = '.rst' - -# The encoding of source files. -#source_encoding = 'utf-8-sig' - -# The master toctree document. -master_doc = 'index' - -# General information about the project. -project = u'Freetype python bindings' -copyright = u'2011-2014, Nicolas P. Rougier' - -# The version info for the project you're documenting, acts as replacement for -# |version| and |release|, also used in various other places throughout the -# built documents. -# -# The short X.Y version. -version = '0.4.1' -# The full version, including alpha/beta/rc tags. -release = '0.4.1' - -# The language for content autogenerated by Sphinx. Refer to documentation -# for a list of supported languages. -#language = None - -# There are two options for replacing |today|: either, you set today to some -# non-false value, then it is used: -#today = '' -# Else, today_fmt is used as the format for a strftime call. -#today_fmt = '%B %d, %Y' - -# List of patterns, relative to source directory, that match files and -# directories to ignore when looking for source files. -exclude_patterns = ['_build'] - -# The reST default role (used for this markup: `text`) to use for all documents. -#default_role = None - -# If true, '()' will be appended to :func: etc. cross-reference text. -#add_function_parentheses = True - -# If true, the current module name will be prepended to all description -# unit titles (such as .. function::). -#add_module_names = True - -# If true, sectionauthor and moduleauthor directives will be shown in the -# output. They are ignored by default. -#show_authors = False - -# The name of the Pygments (syntax highlighting) style to use. -pygments_style = 'sphinx' - -# A list of ignored prefixes for module index sorting. -#modindex_common_prefix = [] - - -# -- Options for HTML output --------------------------------------------------- - -# The theme to use for HTML and HTML Help pages. See the documentation for -# a list of builtin themes. -# html_theme = 'default' - -# Theme options are theme-specific and customize the look and feel of a theme -# further. For a list of options available for each theme, see the -# documentation. -#html_theme_options = {} - -# on_rtd is whether we are on readthedocs.org, this line of code grabbed from docs.readthedocs.org -on_rtd = os.environ.get('READTHEDOCS', None) == 'True' -# only import and set the theme if we're building docs locally -if not on_rtd: - import sphinx_rtd_theme - html_theme = 'sphinx_rtd_theme' - html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] - -# Add any paths that contain custom themes here, relative to this directory. -#html_theme_path = [] - -# The name for this set of Sphinx documents. If None, it defaults to -# " v documentation". -#html_title = None - -# A shorter title for the navigation bar. Default is the same as html_title. -#html_short_title = None - -# The name of an image file (relative to this directory) to place at the top -# of the sidebar. -#html_logo = None - -# The name of an image file (within the static path) to use as favicon of the -# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 -# pixels large. -#html_favicon = None - -# Add any paths that contain custom static files (such as style sheets) here, -# relative to this directory. They are copied after the builtin static files, -# so a file named "default.css" will overwrite the builtin "default.css". -html_static_path = ['_static'] - -# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, -# using the given strftime format. -#html_last_updated_fmt = '%b %d, %Y' - -# If true, SmartyPants will be used to convert quotes and dashes to -# typographically correct entities. -#html_use_smartypants = True - -# Custom sidebar templates, maps document names to template names. -#html_sidebars = {} - -# Additional templates that should be rendered to pages, maps page names to -# template names. -#html_additional_pages = {} - -# If false, no module index is generated. -#html_domain_indices = True - -# If false, no index is generated. -#html_use_index = True - -# If true, the index is split into individual pages for each letter. -#html_split_index = False - -# If true, links to the reST sources are added to the pages. -#html_show_sourcelink = True - -# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. -#html_show_sphinx = True - -# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. -#html_show_copyright = True - -# If true, an OpenSearch description file will be output, and all pages will -# contain a tag referring to it. The value of this option must be the -# base URL from which the finished HTML is served. -#html_use_opensearch = '' - -# This is the file name suffix for HTML files (e.g. ".xhtml"). -#html_file_suffix = None - -# Output file base name for HTML help builder. -htmlhelp_basename = 'FreetypePythondoc' - - -# -- Options for LaTeX output -------------------------------------------------- - -# The paper size ('letter' or 'a4'). -#latex_paper_size = 'letter' - -# The font size ('10pt', '11pt' or '12pt'). -#latex_font_size = '10pt' - -# Grouping the document tree into LaTeX files. List of tuples -# (source start file, target name, title, author, documentclass [howto/manual]). -latex_documents = [ - ('index', 'FreetypePython.tex', u'Freetype Python Documentation', - u'Nicolas P. Rougier', 'manual'), -] - -# The name of an image file (relative to this directory) to place at the top of -# the title page. -#latex_logo = None - -# For "manual" documents, if this is true, then toplevel headings are parts, -# not chapters. -#latex_use_parts = False - -# If true, show page references after internal links. -#latex_show_pagerefs = False - -# If true, show URL addresses after external links. -#latex_show_urls = False - -# Additional stuff for the LaTeX preamble. -#latex_preamble = '' - -# Documents to append as an appendix to all manuals. -#latex_appendices = [] - -# If false, no module index is generated. -#latex_domain_indices = True - - -# -- Options for manual page output -------------------------------------------- - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - ('index', 'freetypepython', u'Freetype Python Documentation', - [u'Nicolas P. Rougier'], 1) -] diff --git a/third_party/freetype-py/doc/constants.rst b/third_party/freetype-py/doc/constants.rst deleted file mode 100644 index e36327a..0000000 --- a/third_party/freetype-py/doc/constants.rst +++ /dev/null @@ -1,31 +0,0 @@ -Constants -========= - -.. toctree:: - :maxdepth: 1 - - ft_encodings.rst - ft_face_flags.rst - ft_fstypes.rst - ft_glyph_bbox_modes.rst - ft_glyph_formats.rst - ft_kerning_modes.rst - ft_lcd_filters.rst - ft_load_flags.rst - ft_load_targets.rst - ft_open_modes.rst - ft_outline_flags.rst - ft_pixel_modes.rst - ft_render_modes.rst - ft_stroker_borders.rst - ft_stroker_linecaps.rst - ft_stroker_linejoins.rst - ft_style_flags.rst - tt_adobe_ids.rst - tt_apple_ids.rst - tt_mac_ids.rst - tt_mac_langids.rst - tt_ms_ids.rst - tt_ms_langids.rst - tt_name_ids.rst - tt_platforms.rst diff --git a/third_party/freetype-py/doc/face.rst b/third_party/freetype-py/doc/face.rst deleted file mode 100644 index 625db5a..0000000 --- a/third_party/freetype-py/doc/face.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -Face -==== -.. autoclass:: Face - :members: diff --git a/third_party/freetype-py/doc/ft_encodings.rst b/third_party/freetype-py/doc/ft_encodings.rst deleted file mode 100644 index fc53e30..0000000 --- a/third_party/freetype-py/doc/ft_encodings.rst +++ /dev/null @@ -1,83 +0,0 @@ -FT_ENCODINGS -============ - -An enumeration used to specify character sets supported by charmaps. Used in -the FT_Select_Charmap API function. - -.. data:: FT_ENCODING_NONE - - The encoding value 0 is reserved. - -.. data:: FT_ENCODING_UNICODE - - Corresponds to the Unicode character set. This value covers all versions of - the Unicode repertoire, including ASCII and Latin-1. Most fonts include a - Unicode charmap, but not all of them. - - For example, if you want to access Unicode value U+1F028 (and the font - contains it), use value 0x1F028 as the input value for FT_Get_Char_Index. - -.. data:: FT_ENCODING_MS_SYMBOL - - Corresponds to the Microsoft Symbol encoding, used to encode mathematical - symbols in the 32..255 character code range. For more information, see - 'http://www.ceviz.net/symbol.htm'. - -.. data:: FT_ENCODING_SJIS - - Corresponds to Japanese SJIS encoding. More info at at - 'http://langsupport.japanreference.com/encoding.shtml'. See note on - multi-byte encodings below. - -.. data:: FT_ENCODING_GB2312 - - Corresponds to an encoding system for Simplified Chinese as used used in - mainland China. - -.. data:: FT_ENCODING_BIG5 - - Corresponds to an encoding system for Traditional Chinese as used in Taiwan - and Hong Kong. - -.. data:: FT_ENCODING_WANSUNG - - Corresponds to the Korean encoding system known as Wansung. For more - information see 'http://www.microsoft.com/typography/unicode/949.txt'. - -.. data:: FT_ENCODING_JOHAB - - The Korean standard character set (KS C 5601-1992), which corresponds to MS - Windows code page 1361. This character set includes all possible Hangeul - character combinations. - -.. data:: FT_ENCODING_ADOBE_LATIN_1 - - Corresponds to a Latin-1 encoding as defined in a Type 1 PostScript font. It - is limited to 256 character codes. - -.. data:: FT_ENCODING_ADOBE_STANDARD - - Corresponds to the Adobe Standard encoding, as found in Type 1, CFF, and - OpenType/CFF fonts. It is limited to 256 character codes. - -.. data:: FT_ENCODING_ADOBE_EXPERT - - Corresponds to the Adobe Expert encoding, as found in Type 1, CFF, and - OpenType/CFF fonts. It is limited to 256 character codes. - -.. data:: FT_ENCODING_ADOBE_CUSTOM - - Corresponds to a custom encoding, as found in Type 1, CFF, and OpenType/CFF - fonts. It is limited to 256 character codes. - -.. data:: FT_ENCODING_APPLE_ROMAN - - Corresponds to the 8-bit Apple roman encoding. Many TrueType and OpenType - fonts contain a charmap for this encoding, since older versions of Mac OS are - able to use it. - -.. data:: FT_ENCODING_OLD_LATIN_2 - - This value is deprecated and was never used nor reported by FreeType. Don't - use or test for it. - diff --git a/third_party/freetype-py/doc/ft_face_flags.rst b/third_party/freetype-py/doc/ft_face_flags.rst deleted file mode 100644 index ac303d8..0000000 --- a/third_party/freetype-py/doc/ft_face_flags.rst +++ /dev/null @@ -1,111 +0,0 @@ -FT_FACE_FLAGS -============= - -A list of bit flags used in the 'face_flags' field of the FT_FaceRec -structure. They inform client applications of properties of the corresponding -face. - - -.. data:: FT_FACE_FLAG_SCALABLE - - Indicates that the face contains outline glyphs. This doesn't prevent bitmap - strikes, i.e., a face can have both this and and FT_FACE_FLAG_FIXED_SIZES - set. - - -.. data:: FT_FACE_FLAG_FIXED_SIZES - - Indicates that the face contains bitmap strikes. See also the - 'num_fixed_sizes' and 'available_sizes' fields of FT_FaceRec. - - -.. data:: FT_FACE_FLAG_FIXED_WIDTH - - Indicates that the face contains fixed-width characters (like Courier, - Lucido, MonoType, etc.). - - -.. data:: FT_FACE_FLAG_SFNT - - Indicates that the face uses the 'sfnt' storage scheme. For now, this means - TrueType and OpenType. - - -.. data:: FT_FACE_FLAG_HORIZONTAL - - Indicates that the face contains horizontal glyph metrics. This should be set - for all common formats. - - -.. data:: FT_FACE_FLAG_VERTICAL - - Indicates that the face contains vertical glyph metrics. This is only - available in some formats, not all of them. - - -.. data:: FT_FACE_FLAG_KERNING - - Indicates that the face contains kerning information. If set, the kerning - distance can be retrieved through the function FT_Get_Kerning. Otherwise the - function always return the vector (0,0). Note that FreeType doesn't handle - kerning data from the 'GPOS' table (as present in some OpenType fonts). - - -.. data:: FT_FACE_FLAG_MULTIPLE_MASTERS - - Indicates that the font contains multiple masters and is capable of - interpolating between them. See the multiple-masters specific API for - details. - - -.. data:: FT_FACE_FLAG_GLYPH_NAMES - - Indicates that the font contains glyph names that can be retrieved through - FT_Get_Glyph_Name. Note that some TrueType fonts contain broken glyph name - tables. Use the function FT_Has_PS_Glyph_Names when needed. - - -.. data:: FT_FACE_FLAG_EXTERNAL_STREAM - - Used internally by FreeType to indicate that a face's stream was provided by - the client application and should not be destroyed when FT_Done_Face is - called. Don't read or test this flag. - - -.. data:: FT_FACE_FLAG_HINTER - - Set if the font driver has a hinting machine of its own. For example, with - TrueType fonts, it makes sense to use data from the SFNT 'gasp' table only if - the native TrueType hinting engine (with the bytecode interpreter) is - available and active. - - -.. data:: FT_FACE_FLAG_CID_KEYED - - Set if the font is CID-keyed. In that case, the font is not accessed by glyph - indices but by CID values. For subsetted CID-keyed fonts this has the - consequence that not all index values are a valid argument to - FT_Load_Glyph. Only the CID values for which corresponding glyphs in the - subsetted font exist make FT_Load_Glyph return successfully; in all other - cases you get an 'FT_Err_Invalid_Argument' error. - - Note that CID-keyed fonts which are in an SFNT wrapper don't have this flag - set since the glyphs are accessed in the normal way (using contiguous - indices); the 'CID-ness' isn't visible to the application. - - -.. data:: FT_FACE_FLAG_TRICKY - - Set if the font is 'tricky', this is, it always needs the font format's - native hinting engine to get a reasonable result. A typical example is the - Chinese font 'mingli.ttf' which uses TrueType bytecode instructions to move - and scale all of its subglyphs. - - It is not possible to autohint such fonts using FT_LOAD_FORCE_AUTOHINT; it - will also ignore FT_LOAD_NO_HINTING. You have to set both FT_LOAD_NO_HINTING - and FT_LOAD_NO_AUTOHINT to really disable hinting; however, you probably - never want this except for demonstration purposes. - - Currently, there are six TrueType fonts in the list of tricky fonts; they are - hard-coded in file 'ttobjs.c'. - diff --git a/third_party/freetype-py/doc/ft_fstypes.rst b/third_party/freetype-py/doc/ft_fstypes.rst deleted file mode 100644 index e6b1cab..0000000 --- a/third_party/freetype-py/doc/ft_fstypes.rst +++ /dev/null @@ -1,45 +0,0 @@ -FT_FSTYPES -========== - -A list of bit flags that inform client applications of embedding and -subsetting restrictions associated with a font. - -.. data:: FT_FSTYPE_INSTALLABLE_EMBEDDING - - Fonts with no fsType bit set may be embedded and permanently installed on - the remote system by an application. - - -.. data:: FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING - - Fonts that have only this bit set must not be modified, embedded or exchanged - in any manner without first obtaining permission of the font software - copyright owner. - - -.. data:: FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING - - If this bit is set, the font may be embedded and temporarily loaded on the - remote system. Documents containing Preview & Print fonts must be opened - 'read-only'; no edits can be applied to the document. - - -.. data:: FT_FSTYPE_EDITABLE_EMBEDDING - - If this bit is set, the font may be embedded but must only be installed - temporarily on other systems. In contrast to Preview & Print fonts, - documents containing editable fonts may be opened for reading, editing is - permitted, and changes may be saved. - - -.. data:: FT_FSTYPE_NO_SUBSETTING - - If this bit is set, the font may not be subsetted prior to embedding. - - -.. data:: FT_FSTYPE_BITMAP_EMBEDDING_ONLY - - If this bit is set, only bitmaps contained in the font may be embedded; no - outline data may be embedded. If there are no bitmaps available in the font, - then the font is unembeddable. - diff --git a/third_party/freetype-py/doc/ft_glyph_bbox_modes.rst b/third_party/freetype-py/doc/ft_glyph_bbox_modes.rst deleted file mode 100644 index f192aa3..0000000 --- a/third_party/freetype-py/doc/ft_glyph_bbox_modes.rst +++ /dev/null @@ -1,25 +0,0 @@ -FT_GLYPH_BBOX_MODES -=================== - -The mode how the values of FT_Glyph_Get_CBox are returned. - -.. data:: FT_GLYPH_BBOX_UNSCALED - - Return unscaled font units. - -.. data:: FT_GLYPH_BBOX_SUBPIXELS - - Return unfitted 26.6 coordinates. - -.. data:: FT_GLYPH_BBOX_GRIDFIT - - Return grid-fitted 26.6 coordinates. - -.. data:: FT_GLYPH_BBOX_TRUNCATE - - Return coordinates in integer pixels. - -.. data:: FT_GLYPH_BBOX_PIXELS - - Return grid-fitted pixel coordinates. - diff --git a/third_party/freetype-py/doc/ft_glyph_formats.rst b/third_party/freetype-py/doc/ft_glyph_formats.rst deleted file mode 100644 index e686980..0000000 --- a/third_party/freetype-py/doc/ft_glyph_formats.rst +++ /dev/null @@ -1,36 +0,0 @@ -FT_GLYPH_FORMATS -================ - -An enumeration type used to describe the format of a given glyph image. Note -that this version of FreeType only supports two image formats, even though -future font drivers will be able to register their own format. - -.. data:: FT_GLYPH_FORMAT_NONE - - The value 0 is reserved. - -.. data:: FT_GLYPH_FORMAT_COMPOSITE - - The glyph image is a composite of several other images. This format is only - used with FT_LOAD_NO_RECURSE, and is used to report compound glyphs (like - accented characters). - -.. data:: FT_GLYPH_FORMAT_BITMAP - - The glyph image is a bitmap, and can be described as an FT_Bitmap. You - generally need to access the 'bitmap' field of the FT_GlyphSlotRec structure - to read it. - -.. data:: FT_GLYPH_FORMAT_OUTLINE - - The glyph image is a vectorial outline made of line segments and Bezier arcs; - it can be described as an FT_Outline; you generally want to access the - 'outline' field of the FT_GlyphSlotRec structure to read it. - -.. data:: FT_GLYPH_FORMAT_PLOTTER - - The glyph image is a vectorial path with no inside and outside contours. Some - Type 1 fonts, like those in the Hershey family, contain glyphs in this - format. These are described as FT_Outline, but FreeType isn't currently - capable of rendering them correctly. - diff --git a/third_party/freetype-py/doc/ft_kerning_modes.rst b/third_party/freetype-py/doc/ft_kerning_modes.rst deleted file mode 100644 index 1dd2198..0000000 --- a/third_party/freetype-py/doc/ft_kerning_modes.rst +++ /dev/null @@ -1,21 +0,0 @@ -FT_KERNING_MODES -================ - -An enumeration used to specify which kerning values to return in -.. data:: FT_Get_Kerning. - - -.. data:: FT_KERNING_DEFAULT - - Return scaled and grid-fitted kerning distances (value is 0). - - -.. data:: FT_KERNING_UNFITTED - - Return scaled but un-grid-fitted kerning distances. - - -.. data:: FT_KERNING_UNSCALED - - Return the kerning vector in original font units. - diff --git a/third_party/freetype-py/doc/ft_lcd_filters.rst b/third_party/freetype-py/doc/ft_lcd_filters.rst deleted file mode 100644 index 4e407e0..0000000 --- a/third_party/freetype-py/doc/ft_lcd_filters.rst +++ /dev/null @@ -1,36 +0,0 @@ -FT_LCD_FILTERS -============== - -A list of values to identify various types of LCD filters. - - -.. data:: FT_LCD_FILTER_NONE - - Do not perform filtering. When used with subpixel rendering, this results in - sometimes severe color fringes. - - -.. data:: FT_LCD_FILTER_DEFAULT - - The default filter reduces color fringes considerably, at the cost of a - slight blurriness in the output. - - -.. data:: FT_LCD_FILTER_LIGHT - - The light filter is a variant that produces less blurriness at the cost of - slightly more color fringes than the default one. It might be better, - depending on taste, your monitor, or your personal vision. - - -.. data:: FT_LCD_FILTER_LEGACY - - This filter corresponds to the original libXft color filter. It provides high - contrast output but can exhibit really bad color fringes if glyphs are not - extremely well hinted to the pixel grid. In other words, it only works well - if the TrueType bytecode interpreter is enabled and high-quality hinted fonts - are used. - - This filter is only provided for comparison purposes, and might be disabled - or stay unsupported in the future. - diff --git a/third_party/freetype-py/doc/ft_load_flags.rst b/third_party/freetype-py/doc/ft_load_flags.rst deleted file mode 100644 index 5077ae5..0000000 --- a/third_party/freetype-py/doc/ft_load_flags.rst +++ /dev/null @@ -1,131 +0,0 @@ -FT_LOAD_FLAGS -============= - -A list of bit-field constants used with FT_Load_Glyph to indicate what kind -of operations to perform during glyph loading. - - -.. data:: FT_LOAD_DEFAULT - - Corresponding to 0, this value is used as the default glyph load - operation. In this case, the following happens: - - 1. FreeType looks for a bitmap for the glyph corresponding to the face's - current size. If one is found, the function returns. The bitmap data can - be accessed from the glyph slot (see note below). - - 2. If no embedded bitmap is searched or found, FreeType looks for a scalable - outline. If one is found, it is loaded from the font file, scaled to - device pixels, then 'hinted' to the pixel grid in order to optimize - it. The outline data can be accessed from the glyph slot (see note below). - - Note that by default, the glyph loader doesn't render outlines into - bitmaps. The following flags are used to modify this default behaviour to - more specific and useful cases. - - -.. data:: FT_LOAD_NO_SCALE - - Don't scale the outline glyph loaded, but keep it in font units. - - This flag implies FT_LOAD_NO_HINTING and FT_LOAD_NO_BITMAP, and unsets - FT_LOAD_RENDER. - - -.. data:: FT_LOAD_NO_HINTING - - Disable hinting. This generally generates 'blurrier' bitmap glyph when the - glyph is rendered in any of the anti-aliased modes. See also the note below. - - This flag is implied by FT_LOAD_NO_SCALE. - - -.. data:: FT_LOAD_RENDER - - Call FT_Render_Glyph after the glyph is loaded. By default, the glyph is - rendered in FT_RENDER_MODE_NORMAL mode. This can be overridden by - FT_LOAD_TARGET_XXX or FT_LOAD_MONOCHROME. - - This flag is unset by FT_LOAD_NO_SCALE. - - -.. data:: FT_LOAD_NO_BITMAP - - Ignore bitmap strikes when loading. Bitmap-only fonts ignore this flag. - - FT_LOAD_NO_SCALE always sets this flag. - - -.. data:: FT_LOAD_VERTICAL_LAYOUT - - Load the glyph for vertical text layout. Don't use it as it is problematic - currently. - - -.. data:: FT_LOAD_FORCE_AUTOHINT - - Indicates that the auto-hinter is preferred over the font's native - hinter. See also the note below. - - -.. data:: FT_LOAD_CROP_BITMAP - - Indicates that the font driver should crop the loaded bitmap glyph (i.e., - remove all space around its black bits). Not all drivers implement this. - - -.. data:: FT_LOAD_PEDANTIC - - Indicates that the font driver should perform pedantic verifications during - glyph loading. This is mostly used to detect broken glyphs in fonts. By - default, FreeType tries to handle broken fonts also. - - -.. data:: FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH - - Indicates that the font driver should ignore the global advance width defined - in the font. By default, that value is used as the advance width for all - glyphs when the face has FT_FACE_FLAG_FIXED_WIDTH set. - - This flag exists for historical reasons (to support buggy CJK fonts). - - -.. data:: FT_LOAD_NO_RECURSE - - This flag is only used internally. It merely indicates that the font driver - should not load composite glyphs recursively. Instead, it should set the - 'num_subglyph' and 'subglyphs' values of the glyph slot accordingly, and set - 'glyph->format' to FT_GLYPH_FORMAT_COMPOSITE. - - The description of sub-glyphs is not available to client applications for now. - - This flag implies FT_LOAD_NO_SCALE and FT_LOAD_IGNORE_TRANSFORM. - - -.. data:: FT_LOAD_IGNORE_TRANSFORM - - Indicates that the transform matrix set by FT_Set_Transform should be ignored. - - -.. data:: FT_LOAD_MONOCHROME - - This flag is used with FT_LOAD_RENDER to indicate that you want to render an - outline glyph to a 1-bit monochrome bitmap glyph, with 8 pixels packed into - each byte of the bitmap data. - - Note that this has no effect on the hinting algorithm used. You should rather - use FT_LOAD_TARGET_MONO so that the monochrome-optimized hinting algorithm is - used. - - -.. data:: FT_LOAD_LINEAR_DESIGN - - Indicates that the 'linearHoriAdvance' and 'linearVertAdvance' fields of - FT_GlyphSlotRec should be kept in font units. See FT_GlyphSlotRec for - details. - - -.. data:: FT_LOAD_NO_AUTOHINT - - Disable auto-hinter. See also the note below. - diff --git a/third_party/freetype-py/doc/ft_load_targets.rst b/third_party/freetype-py/doc/ft_load_targets.rst deleted file mode 100644 index 63da52b..0000000 --- a/third_party/freetype-py/doc/ft_load_targets.rst +++ /dev/null @@ -1,48 +0,0 @@ -FT_LOAD_TARGETS -=============== - -A list of values that are used to select a specific hinting algorithm to use -by the hinter. You should OR one of these values to your 'load_flags' when -calling FT_Load_Glyph. - -Note that font's native hinters may ignore the hinting algorithm you have -specified (e.g., the TrueType bytecode interpreter). You can set -.. data:: FT_LOAD_FORCE_AUTOHINT to ensure that the auto-hinter is used. - -Also note that FT_LOAD_TARGET_LIGHT is an exception, in that it always -implies FT_LOAD_FORCE_AUTOHINT. - - -.. data:: FT_LOAD_TARGET_NORMAL - - This corresponds to the default hinting algorithm, optimized for standard - gray-level rendering. For monochrome output, use FT_LOAD_TARGET_MONO instead. - - -.. data:: FT_LOAD_TARGET_LIGHT - - A lighter hinting algorithm for non-monochrome modes. Many generated glyphs - are more fuzzy but better resemble its original shape. A bit like rendering - on Mac OS X. - - As a special exception, this target implies FT_LOAD_FORCE_AUTOHINT. - - -.. data:: FT_LOAD_TARGET_MONO - - Strong hinting algorithm that should only be used for monochrome output. The - result is probably unpleasant if the glyph is rendered in non-monochrome - modes. - - -.. data:: FT_LOAD_TARGET_LCD - - A variant of FT_LOAD_TARGET_NORMAL optimized for horizontally decimated LCD - displays. - - -.. data:: FT_LOAD_TARGET_LCD_V - - A variant of FT_LOAD_TARGET_NORMAL optimized for vertically decimated LCD - displays. - diff --git a/third_party/freetype-py/doc/ft_open_modes.rst b/third_party/freetype-py/doc/ft_open_modes.rst deleted file mode 100644 index 2500104..0000000 --- a/third_party/freetype-py/doc/ft_open_modes.rst +++ /dev/null @@ -1,31 +0,0 @@ -FT_OPEN_MODES -============= - -A list of bit-field constants used within the 'flags' field of the -.. data:: FT_Open_Args structure. - - -.. data:: FT_OPEN_MEMORY - - This is a memory-based stream. - - -.. data:: FT_OPEN_STREAM - - Copy the stream from the 'stream' field. - - -.. data:: FT_OPEN_PATHNAME - - Create a new input stream from a C path name. - - -.. data:: FT_OPEN_DRIVER - - Use the 'driver' field. - - -.. data:: FT_OPEN_PARAMS - - Use the 'num_params' and 'params' fields. - diff --git a/third_party/freetype-py/doc/ft_outline_flags.rst b/third_party/freetype-py/doc/ft_outline_flags.rst deleted file mode 100644 index 5bbc684..0000000 --- a/third_party/freetype-py/doc/ft_outline_flags.rst +++ /dev/null @@ -1,69 +0,0 @@ -FT_OUTLINE_FLAGS -================ - -A list of bit-field constants use for the flags in an outline's 'flags' -field. - - -.. data:: FT_OUTLINE_NONE - - Value 0 is reserved. - - -.. data:: FT_OUTLINE_OWNER - - If set, this flag indicates that the outline's field arrays (i.e., 'points', - 'flags', and 'contours') are 'owned' by the outline object, and should thus - be freed when it is destroyed. - - -.. data:: FT_OUTLINE_EVEN_ODD_FILL - - By default, outlines are filled using the non-zero winding rule. If set to 1, - the outline will be filled using the even-odd fill rule (only works with the - smooth rasterizer). - - -.. data:: FT_OUTLINE_REVERSE_FILL - - By default, outside contours of an outline are oriented in clock-wise - direction, as defined in the TrueType specification. This flag is set if the - outline uses the opposite direction (typically for Type 1 fonts). This flag - is ignored by the scan converter. - - -.. data:: FT_OUTLINE_IGNORE_DROPOUTS - - By default, the scan converter will try to detect drop-outs in an outline and - correct the glyph bitmap to ensure consistent shape continuity. If set, this - flag hints the scan-line converter to ignore such cases. See below for more - information. - - -.. data:: FT_OUTLINE_SMART_DROPOUTS - - Select smart dropout control. If unset, use simple dropout control. Ignored - if FT_OUTLINE_IGNORE_DROPOUTS is set. See below for more information. - - -.. data:: FT_OUTLINE_INCLUDE_STUBS - - If set, turn pixels on for 'stubs', otherwise exclude them. Ignored if - FT_OUTLINE_IGNORE_DROPOUTS is set. See below for more information. - - -.. data:: FT_OUTLINE_HIGH_PRECISION - - This flag indicates that the scan-line converter should try to convert this - outline to bitmaps with the highest possible quality. It is typically set for - small character sizes. Note that this is only a hint that might be completely - ignored by a given scan-converter. - - -.. data:: FT_OUTLINE_SINGLE_PASS - - This flag is set to force a given scan-converter to only use a single pass - over the outline to render a bitmap glyph image. Normally, it is set for very - large character sizes. It is only a hint that might be completely ignored by - a given scan-converter. - diff --git a/third_party/freetype-py/doc/ft_pixel_modes.rst b/third_party/freetype-py/doc/ft_pixel_modes.rst deleted file mode 100644 index 4f56ea9..0000000 --- a/third_party/freetype-py/doc/ft_pixel_modes.rst +++ /dev/null @@ -1,55 +0,0 @@ -FT_PIXEL_MODES -============== - -An enumeration type that lists the render modes supported by FreeType 2. Each -mode corresponds to a specific type of scanline conversion performed on the -outline. - - -.. data:: FT_PIXEL_MODE_NONE - - Value 0 is reserved. - - -.. data:: FT_PIXEL_MODE_MONO - - A monochrome bitmap, using 1 bit per pixel. Note that pixels are stored in - most-significant order (MSB), which means that the left-most pixel in a byte - has value 128. - - -.. data:: FT_PIXEL_MODE_GRAY - - An 8-bit bitmap, generally used to represent anti-aliased glyph images. Each - pixel is stored in one byte. Note that the number of 'gray' levels is stored - in the 'num_grays' field of the FT_Bitmap structure (it generally is 256). - - -.. data:: FT_PIXEL_MODE_GRAY2 - - A 2-bit per pixel bitmap, used to represent embedded anti-aliased bitmaps in - font files according to the OpenType specification. We haven't found a single - font using this format, however. - - -.. data:: FT_PIXEL_MODE_GRAY4 - - A 4-bit per pixel bitmap, representing embedded anti-aliased bitmaps in font - files according to the OpenType specification. We haven't found a single font - using this format, however. - - -.. data:: FT_PIXEL_MODE_LCD - - An 8-bit bitmap, representing RGB or BGR decimated glyph images used for - display on LCD displays; the bitmap is three times wider than the original - glyph image. See also FT_RENDER_MODE_LCD. - - -.. data:: FT_PIXEL_MODE_LCD_V - - An 8-bit bitmap, representing RGB or BGR decimated glyph images used for - display on rotated LCD displays; the bitmap is three times taller than the - original glyph image. See also FT_RENDER_MODE_LCD_V. - - diff --git a/third_party/freetype-py/doc/ft_render_modes.rst b/third_party/freetype-py/doc/ft_render_modes.rst deleted file mode 100644 index fd9027b..0000000 --- a/third_party/freetype-py/doc/ft_render_modes.rst +++ /dev/null @@ -1,45 +0,0 @@ -FT_RENDER_MODES -=============== - -An enumeration type that lists the render modes supported by FreeType 2. Each -mode corresponds to a specific type of scanline conversion performed on the -outline. - -For bitmap fonts and embedded bitmaps the 'bitmap->pixel_mode' field in the -.. data:: FT_GlyphSlotRec structure gives the format of the returned bitmap. - -All modes except FT_RENDER_MODE_MONO use 256 levels of opacity. - - -.. data:: FT_RENDER_MODE_NORMAL - - This is the default render mode; it corresponds to 8-bit anti-aliased - bitmaps. - - -.. data:: FT_RENDER_MODE_LIGHT - - This is equivalent to FT_RENDER_MODE_NORMAL. It is only defined as a separate - value because render modes are also used indirectly to define hinting - algorithm selectors. See FT_LOAD_TARGET_XXX for details. - - -.. data:: FT_RENDER_MODE_MONO - - This mode corresponds to 1-bit bitmaps (with 2 levels of opacity). - - -.. data:: FT_RENDER_MODE_LCD - - This mode corresponds to horizontal RGB and BGR sub-pixel displays like LCD - screens. It produces 8-bit bitmaps that are 3 times the width of the original - glyph outline in pixels, and which use the FT_PIXEL_MODE_LCD mode. - - -.. data:: FT_RENDER_MODE_LCD_V - - This mode corresponds to vertical RGB and BGR sub-pixel displays (like PDA - screens, rotated LCD displays, etc.). It produces 8-bit bitmaps that are 3 - times the height of the original glyph outline in pixels and use the - FT_PIXEL_MODE_LCD_V mode. - diff --git a/third_party/freetype-py/doc/ft_stroker_borders.rst b/third_party/freetype-py/doc/ft_stroker_borders.rst deleted file mode 100644 index 31bc073..0000000 --- a/third_party/freetype-py/doc/ft_stroker_borders.rst +++ /dev/null @@ -1,27 +0,0 @@ -FT_STROKER_BORDERS -================== - -These values are used to select a given stroke border in -.. data:: FT_Stroker_GetBorderCounts and FT_Stroker_ExportBorder. - - -.. data:: FT_STROKER_BORDER_LEFT - - Select the left border, relative to the drawing direction. - - -.. data:: FT_STROKER_BORDER_RIGHT - - Select the right border, relative to the drawing direction. - - -Note - - Applications are generally interested in the 'inside' and 'outside' - borders. However, there is no direct mapping between these and the 'left' and - 'right' ones, since this really depends on the glyph's drawing orientation, - which varies between font formats. - - You can however use FT_Outline_GetInsideBorder and - FT_Outline_GetOutsideBorder to get these. - diff --git a/third_party/freetype-py/doc/ft_stroker_linecaps.rst b/third_party/freetype-py/doc/ft_stroker_linecaps.rst deleted file mode 100644 index aa56831..0000000 --- a/third_party/freetype-py/doc/ft_stroker_linecaps.rst +++ /dev/null @@ -1,21 +0,0 @@ -FT_STROKER_LINECAPS -=================== - -These values determine how the end of opened sub-paths are rendered in a -stroke. - - -.. data:: FT_STROKER_LINECAP_BUTT - - The end of lines is rendered as a full stop on the last point itself. - - -.. data:: FT_STROKER_LINECAP_ROUND - - The end of lines is rendered as a half-circle around the last point. - - -.. data:: FT_STROKER_LINECAP_SQUARE - - The end of lines is rendered as a square around the last point. - diff --git a/third_party/freetype-py/doc/ft_stroker_linejoins.rst b/third_party/freetype-py/doc/ft_stroker_linejoins.rst deleted file mode 100644 index dcbdf28..0000000 --- a/third_party/freetype-py/doc/ft_stroker_linejoins.rst +++ /dev/null @@ -1,24 +0,0 @@ -FT_STROKER_LINEJOINS -==================== - -These values determine how two joining lines are rendered in a stroker. - - -.. data:: FT_STROKER_LINEJOIN_ROUND - - Used to render rounded line joins. Circular arcs are used to join two lines - smoothly. - - -.. data:: FT_STROKER_LINEJOIN_BEVEL - - Used to render beveled line joins; i.e., the two joining lines are extended - until they intersect. - - -.. data:: FT_STROKER_LINEJOIN_MITER - - Same as beveled rendering, except that an additional line break is added if - the angle between the two joining lines is too closed (this is useful to - avoid unpleasant spikes in beveled rendering). - diff --git a/third_party/freetype-py/doc/ft_style_flags.rst b/third_party/freetype-py/doc/ft_style_flags.rst deleted file mode 100644 index 9cf532c..0000000 --- a/third_party/freetype-py/doc/ft_style_flags.rst +++ /dev/null @@ -1,16 +0,0 @@ -FT_STYLE_FLAGS -============== - -A list of bit-flags used to indicate the style of a given face. These are -used in the 'style_flags' field of FT_FaceRec. - - -.. data:: FT_STYLE_FLAG_ITALIC - - Indicates that a given face style is italic or oblique. - - -.. data:: FT_STYLE_FLAG_BOLD - - Indicates that a given face is bold. - diff --git a/third_party/freetype-py/doc/glyph.rst b/third_party/freetype-py/doc/glyph.rst deleted file mode 100644 index 9bfa079..0000000 --- a/third_party/freetype-py/doc/glyph.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -Glyph -===== -.. autoclass:: Glyph - :members: diff --git a/third_party/freetype-py/doc/glyph_slot.rst b/third_party/freetype-py/doc/glyph_slot.rst deleted file mode 100644 index eea03c2..0000000 --- a/third_party/freetype-py/doc/glyph_slot.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -Glyph slot -========== -.. autoclass:: GlyphSlot - :members: diff --git a/third_party/freetype-py/doc/index.rst b/third_party/freetype-py/doc/index.rst deleted file mode 100644 index 5e5d358..0000000 --- a/third_party/freetype-py/doc/index.rst +++ /dev/null @@ -1,26 +0,0 @@ -============================= -Freetype python documentation -============================= - -Freetype python provides bindings for the FreeType library. Only the high-level API is bound. - -Freetype-py lives at https://github.com/rougier/freetype-py/ - - -.. toctree:: - :maxdepth: 1 - - introduction.rst - usage.rst - screenshots.rst - api.rst - notes.rst - license.rst - - -Indices and tables -================== - -* :ref:`genindex` -* :ref:`modindex` -* :ref:`search` diff --git a/third_party/freetype-py/doc/introduction.rst b/third_party/freetype-py/doc/introduction.rst deleted file mode 100644 index f7ed63d..0000000 --- a/third_party/freetype-py/doc/introduction.rst +++ /dev/null @@ -1,53 +0,0 @@ -============ -Introduction -============ - -To be able to use freetype python, you need the freetype library version 2 -installed on your system. - - -Pre-requisites -============== - -You need to have the Freetype library installed on your system to be able to use -the freetype python bindings. - -.. warning:: - - If you don't compile the Freetype library yourself, chances are subpixel - anti-aliasing will be disabled due to patent problems. Have a look at - `Freetype FAQ `_ - to know how to enable it. - -Mac users ---------- -Freetype should be already installed on your system. If not, either install it -using `homebrew `_ or compile it and place the library binary -file in '/usr/local/lib'. - -Linux users ------------ -Freetype should be already installed on your system. If not, either install -relevant package from your package manager or compile from sources and place -the library binary file in '/usr/local/lib'. - -Window users ------------- -You can try to install a window binaries available from the Freetype site or -you can compile it from sources. In such a case, make sure the resulting -library binaries is named 'Freetype.dll' (and not something like -Freetype245.dll) and make sure to place a copy in Windows/System32 directory. - - -Installation -============ - -The easiest way to install freetype-pu is to use pip:: - - pip install freetype-py - -Or you can get the latest version from git and install yourself:: - - git clone https://github.com/rougier/freetype-py.git - cd freetype-py - python setup.py install diff --git a/third_party/freetype-py/doc/license.rst b/third_party/freetype-py/doc/license.rst deleted file mode 100644 index 8d980b5..0000000 --- a/third_party/freetype-py/doc/license.rst +++ /dev/null @@ -1,29 +0,0 @@ -License -======= - -Copyright (c) 2011-2014, Nicolas P. Rougier - All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - -Redistributions of source code must retain the above copyright notice, this -list of conditions and the following disclaimer. - -Redistributions in binary form must reproduce the above copyright notice, this -list of conditions and the following disclaimer in the documentation and/or -other materials provided with the distribution. - -Neither the name of the freetype-py Development Team nor the names of its -contributors may be used to endorse or promote products derived from this -software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE -FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/third_party/freetype-py/doc/make.bat b/third_party/freetype-py/doc/make.bat deleted file mode 100644 index 240f628..0000000 --- a/third_party/freetype-py/doc/make.bat +++ /dev/null @@ -1,170 +0,0 @@ -@ECHO OFF - -REM Command file for Sphinx documentation - -if "%SPHINXBUILD%" == "" ( - set SPHINXBUILD=sphinx-build -) -set BUILDDIR=_build -set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% . -if NOT "%PAPER%" == "" ( - set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS% -) - -if "%1" == "" goto help - -if "%1" == "help" ( - :help - echo.Please use `make ^` where ^ is one of - echo. html to make standalone HTML files - echo. dirhtml to make HTML files named index.html in directories - echo. singlehtml to make a single large HTML file - echo. pickle to make pickle files - echo. json to make JSON files - echo. htmlhelp to make HTML files and a HTML help project - echo. qthelp to make HTML files and a qthelp project - echo. devhelp to make HTML files and a Devhelp project - echo. epub to make an epub - echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter - echo. text to make text files - echo. man to make manual pages - echo. changes to make an overview over all changed/added/deprecated items - echo. linkcheck to check all external links for integrity - echo. doctest to run all doctests embedded in the documentation if enabled - goto end -) - -if "%1" == "clean" ( - for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i - del /q /s %BUILDDIR%\* - goto end -) - -if "%1" == "html" ( - %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html - if errorlevel 1 exit /b 1 - echo. - echo.Build finished. The HTML pages are in %BUILDDIR%/html. - goto end -) - -if "%1" == "dirhtml" ( - %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml - if errorlevel 1 exit /b 1 - echo. - echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml. - goto end -) - -if "%1" == "singlehtml" ( - %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml - if errorlevel 1 exit /b 1 - echo. - echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml. - goto end -) - -if "%1" == "pickle" ( - %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle - if errorlevel 1 exit /b 1 - echo. - echo.Build finished; now you can process the pickle files. - goto end -) - -if "%1" == "json" ( - %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json - if errorlevel 1 exit /b 1 - echo. - echo.Build finished; now you can process the JSON files. - goto end -) - -if "%1" == "htmlhelp" ( - %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp - if errorlevel 1 exit /b 1 - echo. - echo.Build finished; now you can run HTML Help Workshop with the ^ -.hhp project file in %BUILDDIR%/htmlhelp. - goto end -) - -if "%1" == "qthelp" ( - %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp - if errorlevel 1 exit /b 1 - echo. - echo.Build finished; now you can run "qcollectiongenerator" with the ^ -.qhcp project file in %BUILDDIR%/qthelp, like this: - echo.^> qcollectiongenerator %BUILDDIR%\qthelp\FreetypePython.qhcp - echo.To view the help file: - echo.^> assistant -collectionFile %BUILDDIR%\qthelp\FreetypePython.ghc - goto end -) - -if "%1" == "devhelp" ( - %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp - if errorlevel 1 exit /b 1 - echo. - echo.Build finished. - goto end -) - -if "%1" == "epub" ( - %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub - if errorlevel 1 exit /b 1 - echo. - echo.Build finished. The epub file is in %BUILDDIR%/epub. - goto end -) - -if "%1" == "latex" ( - %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex - if errorlevel 1 exit /b 1 - echo. - echo.Build finished; the LaTeX files are in %BUILDDIR%/latex. - goto end -) - -if "%1" == "text" ( - %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text - if errorlevel 1 exit /b 1 - echo. - echo.Build finished. The text files are in %BUILDDIR%/text. - goto end -) - -if "%1" == "man" ( - %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man - if errorlevel 1 exit /b 1 - echo. - echo.Build finished. The manual pages are in %BUILDDIR%/man. - goto end -) - -if "%1" == "changes" ( - %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes - if errorlevel 1 exit /b 1 - echo. - echo.The overview file is in %BUILDDIR%/changes. - goto end -) - -if "%1" == "linkcheck" ( - %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck - if errorlevel 1 exit /b 1 - echo. - echo.Link check complete; look for any errors in the above output ^ -or in %BUILDDIR%/linkcheck/output.txt. - goto end -) - -if "%1" == "doctest" ( - %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest - if errorlevel 1 exit /b 1 - echo. - echo.Testing of doctests in the sources finished, look at the ^ -results in %BUILDDIR%/doctest/output.txt. - goto end -) - -:end diff --git a/third_party/freetype-py/doc/make_enums.py b/third_party/freetype-py/doc/make_enums.py deleted file mode 100644 index f87c677..0000000 --- a/third_party/freetype-py/doc/make_enums.py +++ /dev/null @@ -1,48 +0,0 @@ -import freetype - -enums = [ - 'ft_fstypes', - 'ft_face_flags', - 'ft_encodings', - 'ft_glyph_bbox_modes', - 'ft_glyph_formats', - 'ft_kerning_modes', - 'ft_lcd_filters', - 'ft_load_flags', - 'ft_load_targets', - 'ft_open_modes', - 'ft_outline_flags', - 'ft_pixel_modes', - 'ft_render_modes', - 'ft_stroker_borders', - 'ft_stroker_linecaps', - 'ft_stroker_linejoins', - 'ft_style_flags', - 'tt_adobe_ids', - 'tt_apple_ids', - 'tt_mac_ids', - 'tt_ms_ids', - 'tt_ms_langids', - 'tt_mac_langids', - 'tt_name_ids', - 'tt_platforms' -] - -for name in enums: - print name - module = getattr(freetype, name) - doc = getattr(module, '__doc__') - doc = doc.split('\n') - file = open( name+'.rst', 'w') - - title = name.upper() - file.write(title+'\n') - file.write('='*len(title)+'\n') - - for line in doc: - if line.startswith('FT_') or line.startswith('TT_'): - file.write( '.. data:: '+ line + '\n') - else: - file.write( line + '\n') - file.close() - diff --git a/third_party/freetype-py/doc/notes.rst b/third_party/freetype-py/doc/notes.rst deleted file mode 100644 index 95eeba7..0000000 --- a/third_party/freetype-py/doc/notes.rst +++ /dev/null @@ -1,44 +0,0 @@ -============= -Release notes -============= - -0.4.1 -===== -* Fixed a bug in Face.load_char -* Added get_format and get_fstype in Face (titusz.pan) - -0.3.3 -===== -* Fixed a bug in get_kerning -* Added test against freetype version for FT_ReferenceFace and FT_Get_FSType_Flags - -0.3.2 -===== -* Added wordle.py example -* Added get_bbox for Outline class -* Added get_cbox for Outline and Glyph classes -* Added __del__ method to Face class -* Set encoding (utf-8) to all source files and examples. -* Added test against freetype version for FT_Library_SetLcdFilterWeights. - -0.3.1 -===== -* Added FT_Stroker bindings (enums, structs and methods) -* Added ft-outline and ft-color examples -* Fixed first/next char in Face -* Pythonic interface has been documented - -0.3.0 -===== -* Added ftdump.py demo and necessary functions - -0.2.0 -===== -* Added sfnt functions -* Added TT_XXX flags in ft_enums -* New examples - -0.1.1 -===== -* Initial release -* Working examples diff --git a/third_party/freetype-py/doc/outline.rst b/third_party/freetype-py/doc/outline.rst deleted file mode 100644 index 6c187c0..0000000 --- a/third_party/freetype-py/doc/outline.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -Outline -======= -.. autoclass:: Outline - :members: diff --git a/third_party/freetype-py/doc/screenshots.rst b/third_party/freetype-py/doc/screenshots.rst deleted file mode 100644 index d1f0c54..0000000 --- a/third_party/freetype-py/doc/screenshots.rst +++ /dev/null @@ -1,34 +0,0 @@ -=========== -Screenshots -=========== - -Screenshot below comes from the wordle.py example. No clever tricks here, just -brute force. - -.. image:: _static/wordle.png - -Screenshots below comes from the glyph-vector.py and glyph-vectopr-2.py -examples showing how to access a glyph outline information and use it to draw -the glyph. Rendering (with Bézier curves) is done using matplotlib. - -.. image:: _static/S.png -.. image:: _static/G.png - - -Screenshot below comes from the glyph-color.py showing how to draw and combine -a glyph outline with the regular glyph. - -.. image:: _static/outline.png - -The screenshot below comes from the hello-world.py example showing how to draw -text in a bitmap (that has been zoomed in to show antialiasing). - -.. image:: _static/hello-world.png - - -The screenshot below comes from the agg-trick.py example showing an -implementation of ideas from the `Texts Rasterization Exposures -`_ by -Maxim Shemarev. - -.. image:: _static/agg-trick.png diff --git a/third_party/freetype-py/doc/sfnt_name.rst b/third_party/freetype-py/doc/sfnt_name.rst deleted file mode 100644 index 95aaefd..0000000 --- a/third_party/freetype-py/doc/sfnt_name.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -SFNT name -========== -.. autoclass:: SfntName - :members: diff --git a/third_party/freetype-py/doc/size_metrics.rst b/third_party/freetype-py/doc/size_metrics.rst deleted file mode 100644 index 9f2e489..0000000 --- a/third_party/freetype-py/doc/size_metrics.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -Size Metrics -============ -.. autoclass:: SizeMetrics - :members: diff --git a/third_party/freetype-py/doc/stroker.rst b/third_party/freetype-py/doc/stroker.rst deleted file mode 100644 index 27a2a25..0000000 --- a/third_party/freetype-py/doc/stroker.rst +++ /dev/null @@ -1,6 +0,0 @@ -.. currentmodule:: freetype - -Stroker -======= -.. autoclass:: Stroker - :members: diff --git a/third_party/freetype-py/doc/tt_adobe_ids.rst b/third_party/freetype-py/doc/tt_adobe_ids.rst deleted file mode 100644 index bcc6e58..0000000 --- a/third_party/freetype-py/doc/tt_adobe_ids.rst +++ /dev/null @@ -1,25 +0,0 @@ -TT_ADOBE_IDS -============ - -A list of valid values for the 'encoding_id' for TT_PLATFORM_ADOBE -charmaps. This is a FreeType-specific extension! - -.. data:: TT_ADOBE_ID_STANDARD - - Adobe standard encoding. - - -.. data:: TT_ADOBE_ID_EXPERT - - Adobe expert encoding. - - -.. data:: TT_ADOBE_ID_CUSTOM - - Adobe custom encoding. - - -.. data:: TT_ADOBE_ID_LATIN_1 - - Adobe Latin 1 encoding. - diff --git a/third_party/freetype-py/doc/tt_apple_ids.rst b/third_party/freetype-py/doc/tt_apple_ids.rst deleted file mode 100644 index c26b825..0000000 --- a/third_party/freetype-py/doc/tt_apple_ids.rst +++ /dev/null @@ -1,37 +0,0 @@ -TT_APPLE_IDS -============ - -A list of valid values for the 'encoding_id' for TT_PLATFORM_APPLE_UNICODE -charmaps and name entries. - - -.. data:: TT_APPLE_ID_DEFAULT - - Unicode version 1.0. - - -.. data:: TT_APPLE_ID_UNICODE_1_1 - - Unicode 1.1; specifies Hangul characters starting at U+34xx. - - -.. data:: TT_APPLE_ID_ISO_10646 - - Deprecated (identical to preceding). - - -.. data:: TT_APPLE_ID_UNICODE_2_0 - - Unicode 2.0 and beyond (UTF-16 BMP only). - - -.. data:: TT_APPLE_ID_UNICODE_32 - - Unicode 3.1 and beyond, using UTF-32. - - -.. data:: TT_APPLE_ID_VARIANT_SELECTOR - - From Adobe, not Apple. Not a normal cmap. Specifies variations on a real - cmap. - diff --git a/third_party/freetype-py/doc/tt_mac_ids.rst b/third_party/freetype-py/doc/tt_mac_ids.rst deleted file mode 100644 index 5b7cec4..0000000 --- a/third_party/freetype-py/doc/tt_mac_ids.rst +++ /dev/null @@ -1,74 +0,0 @@ -TT_MAC_IDS -========== - -A list of valid values for the 'encoding_id' for TT_PLATFORM_MACINTOSH -charmaps and name entries. - -.. data:: TT_MAC_ID_ROMAN - -.. data:: TT_MAC_ID_TELUGU - -.. data:: TT_MAC_ID_GURMUKHI - -.. data:: TT_MAC_ID_TIBETAN - -.. data:: TT_MAC_ID_SIMPLIFIED_CHINESE - -.. data:: TT_MAC_ID_SINDHI - -.. data:: TT_MAC_ID_SINHALESE - -.. data:: TT_MAC_ID_RUSSIAN - -.. data:: TT_MAC_ID_KANNADA - -.. data:: TT_MAC_ID_VIETNAMESE - -.. data:: TT_MAC_ID_MONGOLIAN - -.. data:: TT_MAC_ID_DEVANAGARI - -.. data:: TT_MAC_ID_HEBREW - -.. data:: TT_MAC_ID_TAMIL - -.. data:: TT_MAC_ID_THAI - -.. data:: TT_MAC_ID_BURMESE - -.. data:: TT_MAC_ID_MALDIVIAN - -.. data:: TT_MAC_ID_TRADITIONAL_CHINESE - -.. data:: TT_MAC_ID_JAPANESE - -.. data:: TT_MAC_ID_GREEK - -.. data:: TT_MAC_ID_LAOTIAN - -.. data:: TT_MAC_ID_KHMER - -.. data:: TT_MAC_ID_UNINTERP - -.. data:: TT_MAC_ID_ORIYA - -.. data:: TT_MAC_ID_RSYMBOL - -.. data:: TT_MAC_ID_MALAYALAM - -.. data:: TT_MAC_ID_GEEZ - -.. data:: TT_MAC_ID_KOREAN - -.. data:: TT_MAC_ID_GUJARATI - -.. data:: TT_MAC_ID_BENGALI - -.. data:: TT_MAC_ID_ARABIC - -.. data:: TT_MAC_ID_GEORGIAN - -.. data:: TT_MAC_ID_ARMENIAN - -.. data:: TT_MAC_ID_SLAVIC - diff --git a/third_party/freetype-py/doc/tt_mac_langids.rst b/third_party/freetype-py/doc/tt_mac_langids.rst deleted file mode 100644 index 0491e2a..0000000 --- a/third_party/freetype-py/doc/tt_mac_langids.rst +++ /dev/null @@ -1,246 +0,0 @@ -TT_MAC_LANGIDS -============== - -Possible values of the language identifier field in the name records of the -TTF 'name' table if the 'platform' identifier code is TT_PLATFORM_MACINTOSH. - -.. data:: TT_MAC_LANGID_LATIN - -.. data:: TT_MAC_LANGID_MALAY_ARABIC_SCRIPT - -.. data:: TT_MAC_LANGID_HINDI - -.. data:: TT_MAC_LANGID_CATALAN - -.. data:: TT_MAC_LANGID_MARATHI - -.. data:: TT_MAC_LANGID_ICELANDIC - -.. data:: TT_MAC_LANGID_ARABIC - -.. data:: TT_MAC_LANGID_SWAHILI - -.. data:: TT_MAC_LANGID_KHMER - -.. data:: TT_MAC_LANGID_UKRAINIAN - -.. data:: TT_MAC_LANGID_FINNISH - -.. data:: TT_MAC_LANGID_POLISH - -.. data:: TT_MAC_LANGID_NEPALI - -.. data:: TT_MAC_LANGID_UZBEK - -.. data:: TT_MAC_LANGID_TELUGU - -.. data:: TT_MAC_LANGID_MALTESE - -.. data:: TT_MAC_LANGID_AFRIKAANS - -.. data:: TT_MAC_LANGID_CHEWA - -.. data:: TT_MAC_LANGID_BASQUE - -.. data:: TT_MAC_LANGID_CZECH - -.. data:: TT_MAC_LANGID_ROMANIAN - -.. data:: TT_MAC_LANGID_QUECHUA - -.. data:: TT_MAC_LANGID_TAGALOG - -.. data:: TT_MAC_LANGID_HUNGARIAN - -.. data:: TT_MAC_LANGID_AZERBAIJANI_CYRILLIC_SCRIPT - -.. data:: TT_MAC_LANGID_TONGAN - -.. data:: TT_MAC_LANGID_SUNDANESE - -.. data:: TT_MAC_LANGID_JAPANESE - -.. data:: TT_MAC_LANGID_MONGOLIAN - -.. data:: TT_MAC_LANGID_ALBANIAN - -.. data:: TT_MAC_LANGID_NORWEGIAN - -.. data:: TT_MAC_LANGID_SLOVAK - -.. data:: TT_MAC_LANGID_MALAGASY - -.. data:: TT_MAC_LANGID_DZONGKHA - -.. data:: TT_MAC_LANGID_DUTCH - -.. data:: TT_MAC_LANGID_MALAY_ROMAN_SCRIPT - -.. data:: TT_MAC_LANGID_SERBIAN - -.. data:: TT_MAC_LANGID_GERMAN - -.. data:: TT_MAC_LANGID_SOMALI - -.. data:: TT_MAC_LANGID_KOREAN - -.. data:: TT_MAC_LANGID_MONGOLIAN_MONGOLIAN_SCRIPT - -.. data:: TT_MAC_LANGID_CROATIAN - -.. data:: TT_MAC_LANGID_TURKISH - -.. data:: TT_MAC_LANGID_MOLDAVIAN - -.. data:: TT_MAC_LANGID_LAO - -.. data:: TT_MAC_LANGID_ORIYA - -.. data:: TT_MAC_LANGID_BRETON - -.. data:: TT_MAC_LANGID_PASHTO - -.. data:: TT_MAC_LANGID_GUARANI - -.. data:: TT_MAC_LANGID_HEBREW - -.. data:: TT_MAC_LANGID_SLOVENIAN - -.. data:: TT_MAC_LANGID_ESTONIAN - -.. data:: TT_MAC_LANGID_RUNDI - -.. data:: TT_MAC_LANGID_URDU - -.. data:: TT_MAC_LANGID_CHINESE_TRADITIONAL - -.. data:: TT_MAC_LANGID_TATAR - -.. data:: TT_MAC_LANGID_CHINESE_SIMPLIFIED - -.. data:: TT_MAC_LANGID_AZERBAIJANI_ARABIC_SCRIPT - -.. data:: TT_MAC_LANGID_SANSKRIT - -.. data:: TT_MAC_LANGID_KURDISH - -.. data:: TT_MAC_LANGID_FAEROESE - -.. data:: TT_MAC_LANGID_MONGOLIAN_CYRILLIC_SCRIPT - -.. data:: TT_MAC_LANGID_TIGRINYA - -.. data:: TT_MAC_LANGID_THAI - -.. data:: TT_MAC_LANGID_DANISH - -.. data:: TT_MAC_LANGID_KAZAKH - -.. data:: TT_MAC_LANGID_YIDDISH - -.. data:: TT_MAC_LANGID_ESPERANTO - -.. data:: TT_MAC_LANGID_LITHUANIAN - -.. data:: TT_MAC_LANGID_FARSI - -.. data:: TT_MAC_LANGID_LETTISH - -.. data:: TT_MAC_LANGID_VIETNAMESE - -.. data:: TT_MAC_LANGID_PORTUGUESE - -.. data:: TT_MAC_LANGID_IRISH - -.. data:: TT_MAC_LANGID_WELSH - -.. data:: TT_MAC_LANGID_PUNJABI - -.. data:: TT_MAC_LANGID_GREEK - -.. data:: TT_MAC_LANGID_INUKTITUT - -.. data:: TT_MAC_LANGID_FRENCH - -.. data:: TT_MAC_LANGID_GREEK_POLYTONIC - -.. data:: TT_MAC_LANGID_AZERBAIJANI - -.. data:: TT_MAC_LANGID_JAVANESE - -.. data:: TT_MAC_LANGID_SWEDISH - -.. data:: TT_MAC_LANGID_UIGHUR - -.. data:: TT_MAC_LANGID_BENGALI - -.. data:: TT_MAC_LANGID_RUANDA - -.. data:: TT_MAC_LANGID_SINDHI - -.. data:: TT_MAC_LANGID_TIBETAN - -.. data:: TT_MAC_LANGID_ENGLISH - -.. data:: TT_MAC_LANGID_SAAMISK - -.. data:: TT_MAC_LANGID_INDONESIAN - -.. data:: TT_MAC_LANGID_MANX_GAELIC - -.. data:: TT_MAC_LANGID_BYELORUSSIAN - -.. data:: TT_MAC_LANGID_BULGARIAN - -.. data:: TT_MAC_LANGID_GEORGIAN - -.. data:: TT_MAC_LANGID_AZERBAIJANI_ROMAN_SCRIPT - -.. data:: TT_MAC_LANGID_ITALIAN - -.. data:: TT_MAC_LANGID_SCOTTISH_GAELIC - -.. data:: TT_MAC_LANGID_ARMENIAN - -.. data:: TT_MAC_LANGID_GALLA - -.. data:: TT_MAC_LANGID_MACEDONIAN - -.. data:: TT_MAC_LANGID_IRISH_GAELIC - -.. data:: TT_MAC_LANGID_KIRGHIZ - -.. data:: TT_MAC_LANGID_TAMIL - -.. data:: TT_MAC_LANGID_SPANISH - -.. data:: TT_MAC_LANGID_BURMESE - -.. data:: TT_MAC_LANGID_KANNADA - -.. data:: TT_MAC_LANGID_GALICIAN - -.. data:: TT_MAC_LANGID_FLEMISH - -.. data:: TT_MAC_LANGID_TAJIKI - -.. data:: TT_MAC_LANGID_ASSAMESE - -.. data:: TT_MAC_LANGID_SINHALESE - -.. data:: TT_MAC_LANGID_GREELANDIC - -.. data:: TT_MAC_LANGID_AMHARIC - -.. data:: TT_MAC_LANGID_KASHMIRI - -.. data:: TT_MAC_LANGID_AYMARA - -.. data:: TT_MAC_LANGID_GUJARATI - -.. data:: TT_MAC_LANGID_RUSSIAN - -.. data:: TT_MAC_LANGID_TURKMEN - -.. data:: TT_MAC_LANGID_MALAYALAM - diff --git a/third_party/freetype-py/doc/tt_ms_ids.rst b/third_party/freetype-py/doc/tt_ms_ids.rst deleted file mode 100644 index ede063c..0000000 --- a/third_party/freetype-py/doc/tt_ms_ids.rst +++ /dev/null @@ -1,49 +0,0 @@ -TT_MS_IDS -========= - -A list of valid values for the 'encoding_id' for TT_PLATFORM_MICROSOFT -charmaps and name entries. - - -.. data:: TT_MS_ID_SYMBOL_CS - - Corresponds to Microsoft symbol encoding. See FT_ENCODING_MS_SYMBOL. - - -.. data:: TT_MS_ID_UNICODE_CS - - Corresponds to a Microsoft WGL4 charmap, matching Unicode. See - FT_ENCODING_UNICODE. - - -.. data:: TT_MS_ID_SJIS - - Corresponds to SJIS Japanese encoding. See FT_ENCODING_SJIS. - - -.. data:: TT_MS_ID_GB2312 - - Corresponds to Simplified Chinese as used in Mainland China. See - FT_ENCODING_GB2312. - - -.. data:: TT_MS_ID_BIG_5 - - Corresponds to Traditional Chinese as used in Taiwan and Hong Kong. See - FT_ENCODING_BIG5. - - -.. data:: TT_MS_ID_WANSUNG - - Corresponds to Korean Wansung encoding. See FT_ENCODING_WANSUNG. - -.. data:: TT_MS_ID_JOHAB - - Corresponds to Johab encoding. See FT_ENCODING_JOHAB. - - -.. data:: TT_MS_ID_UCS_4 - - Corresponds to UCS-4 or UTF-32 charmaps. This has been added to the OpenType - specification version 1.4 (mid-2001.) - diff --git a/third_party/freetype-py/doc/tt_ms_langids.rst b/third_party/freetype-py/doc/tt_ms_langids.rst deleted file mode 100644 index bd0a71f..0000000 --- a/third_party/freetype-py/doc/tt_ms_langids.rst +++ /dev/null @@ -1,496 +0,0 @@ -TT_MS_LANGIDS -============= - -Possible values of the language identifier field in the name records of the -TTF 'name' table if the 'platform' identifier code is TT_PLATFORM_MICROSOFT. - -.. data:: TT_MS_LANGID_SANSKRIT_INDIA - -.. data:: TT_MS_LANGID_ENGLISH_UNITED_KINGDOM - -.. data:: TT_MS_LANGID_ENGLISH_BELIZE - -.. data:: TT_MS_LANGID_ARABIC_LEBANON - -.. data:: TT_MS_LANGID_MOLDAVIAN_MOLDAVIA - -.. data:: TT_MS_LANGID_TURKISH_TURKEY - -.. data:: TT_MS_LANGID_WELSH_WALES - -.. data:: TT_MS_LANGID_GERMAN_AUSTRIA - -.. data:: TT_MS_LANGID_DUTCH_BELGIUM - -.. data:: TT_MS_LANGID_YI_CHINA - -.. data:: TT_MS_LANGID_QUECHUA_ECUADOR - -.. data:: TT_MS_LANGID_SPANISH_EL_SALVADOR - -.. data:: TT_MS_LANGID_SWAHILI_KENYA - -.. data:: TT_MS_LANGID_QUECHUA_BOLIVIA - -.. data:: TT_MS_LANGID_SLOVENE_SLOVENIA - -.. data:: TT_MS_LANGID_ORIYA_INDIA - -.. data:: TT_MS_LANGID_FARSI_IRAN - -.. data:: TT_MS_LANGID_ENGLISH_CANADA - -.. data:: TT_MS_LANGID_NEPALI_NEPAL - -.. data:: TT_MS_LANGID_DHIVEHI_MALDIVES - -.. data:: TT_MS_LANGID_GERMAN_LIECHTENSTEI - -.. data:: TT_MS_LANGID_TAMIL_INDIA - -.. data:: TT_MS_LANGID_ARABIC_UAE - -.. data:: TT_MS_LANGID_JAPANESE_JAPAN - -.. data:: TT_MS_LANGID_TAMAZIGHT_MOROCCO - -.. data:: TT_MS_LANGID_FRENCH_FRANCE - -.. data:: TT_MS_LANGID_CHINESE_MACAU - -.. data:: TT_MS_LANGID_VIETNAMESE_VIET_NAM - -.. data:: TT_MS_LANGID_HEBREW_ISRAEL - -.. data:: TT_MS_LANGID_SAMI_NORTHERN_SWEDEN - -.. data:: TT_MS_LANGID_PUNJABI_ARABIC_PAKISTAN - -.. data:: TT_MS_LANGID_SWEDISH_SWEDEN - -.. data:: TT_MS_LANGID_FRENCH_REUNION - -.. data:: TT_MS_LANGID_ARABIC_BAHRAIN - -.. data:: TT_MS_LANGID_ENGLISH_INDIA - -.. data:: TT_MS_LANGID_NEPALI_INDIA - -.. data:: TT_MS_LANGID_THAI_THAILAND - -.. data:: TT_MS_LANGID_ENGLISH_GENERAL - -.. data:: TT_MS_LANGID_SAMI_LULE_NORWAY - -.. data:: TT_MS_LANGID_ARABIC_OMAN - -.. data:: TT_MS_LANGID_SPANISH_HONDURAS - -.. data:: TT_MS_LANGID_ENGLISH_JAMAICA - -.. data:: TT_MS_LANGID_ESTONIAN_ESTONIA - -.. data:: TT_MS_LANGID_FRISIAN_NETHERLANDS - -.. data:: TT_MS_LANGID_LATIN - -.. data:: TT_MS_LANGID_ENGLISH_INDONESIA - -.. data:: TT_MS_LANGID_ENGLISH_IRELAND - -.. data:: TT_MS_LANGID_TIBETAN_CHINA - -.. data:: TT_MS_LANGID_PUNJABI_INDIA - -.. data:: TT_MS_LANGID_FRENCH_MALI - -.. data:: TT_MS_LANGID_GERMAN_LUXEMBOURG - -.. data:: TT_MS_LANGID_SUTU_SOUTH_AFRICA - -.. data:: TT_MS_LANGID_FRENCH_CAMEROON - -.. data:: TT_MS_LANGID_FRENCH_CONGO - -.. data:: TT_MS_LANGID_CLASSIC_LITHUANIAN_LITHUANIA - -.. data:: TT_MS_LANGID_MALAYALAM_INDIA - -.. data:: TT_MS_LANGID_SAMI_SOUTHERN_SWEDEN - -.. data:: TT_MS_LANGID_CHEROKEE_UNITED_STATES - -.. data:: TT_MS_LANGID_SPANISH_GUATEMALA - -.. data:: TT_MS_LANGID_CZECH_CZECH_REPUBLIC - -.. data:: TT_MS_LANGID_MANIPURI_INDIA - -.. data:: TT_MS_LANGID_ENGLISH_AUSTRALIA - -.. data:: TT_MS_LANGID_SPANISH_DOMINICAN_REPUBLIC - -.. data:: TT_MS_LANGID_ARABIC_LIBYA - -.. data:: TT_MS_LANGID_FRENCH_WEST_INDIES - -.. data:: TT_MS_LANGID_ENGLISH_TRINIDAD - -.. data:: TT_MS_LANGID_ARABIC_QATAR - -.. data:: TT_MS_LANGID_SPANISH_COLOMBIA - -.. data:: TT_MS_LANGID_GUARANI_PARAGUAY - -.. data:: TT_MS_LANGID_EDO_NIGERIA - -.. data:: TT_MS_LANGID_SEPEDI_SOUTH_AFRICA - -.. data:: TT_MS_LANGID_ENGLISH_HONG_KONG - -.. data:: TT_MS_LANGID_KOREAN_EXTENDED_WANSUNG_KOREA - -.. data:: TT_MS_LANGID_TATAR_TATARSTAN - -.. data:: TT_MS_LANGID_PASHTO_AFGHANISTAN - -.. data:: TT_MS_LANGID_KASHMIRI_PAKISTAN - -.. data:: TT_MS_LANGID_GALICIAN_SPAIN - -.. data:: TT_MS_LANGID_TAJIK_TAJIKISTAN - -.. data:: TT_MS_LANGID_SAMI_INARI_FINLAND - -.. data:: TT_MS_LANGID_KASHMIRI_SASIA - -.. data:: TT_MS_LANGID_SPANISH_ARGENTINA - -.. data:: TT_MS_LANGID_SAMI_SOUTHERN_NORWAY - -.. data:: TT_MS_LANGID_CROATIAN_CROATIA - -.. data:: TT_MS_LANGID_GUJARATI_INDIA - -.. data:: TT_MS_LANGID_TIBETAN_BHUTAN - -.. data:: TT_MS_LANGID_TIGRIGNA_ETHIOPIA - -.. data:: TT_MS_LANGID_FINNISH_FINLAND - -.. data:: TT_MS_LANGID_ENGLISH_UNITED_STATES - -.. data:: TT_MS_LANGID_ITALIAN_SWITZERLAND - -.. data:: TT_MS_LANGID_ARABIC_EGYPT - -.. data:: TT_MS_LANGID_SPANISH_LATIN_AMERICA - -.. data:: TT_MS_LANGID_LITHUANIAN_LITHUANIA - -.. data:: TT_MS_LANGID_ARABIC_ALGERIA - -.. data:: TT_MS_LANGID_MALAY_MALAYSIA - -.. data:: TT_MS_LANGID_ARABIC_GENERAL - -.. data:: TT_MS_LANGID_CHINESE_PRC - -.. data:: TT_MS_LANGID_BENGALI_BANGLADESH - -.. data:: TT_MS_LANGID_SPANISH_PERU - -.. data:: TT_MS_LANGID_SPANISH_SPAIN_INTERNATIONAL_SORT - -.. data:: TT_MS_LANGID_DIVEHI_MALDIVES - -.. data:: TT_MS_LANGID_LATVIAN_LATVIA - -.. data:: TT_MS_LANGID_TURKMEN_TURKMENISTAN - -.. data:: TT_MS_LANGID_XHOSA_SOUTH_AFRICA - -.. data:: TT_MS_LANGID_KHMER_CAMBODIA - -.. data:: TT_MS_LANGID_NORWEGIAN_NORWAY_NYNORSK - -.. data:: TT_MS_LANGID_ARABIC_MOROCCO - -.. data:: TT_MS_LANGID_FRENCH_SENEGAL - -.. data:: TT_MS_LANGID_YORUBA_NIGERIA - -.. data:: TT_MS_LANGID_CATALAN_SPAIN - -.. data:: TT_MS_LANGID_AFRIKAANS_SOUTH_AFRICA - -.. data:: TT_MS_LANGID_ZULU_SOUTH_AFRICA - -.. data:: TT_MS_LANGID_SPANISH_URUGUAY - -.. data:: TT_MS_LANGID_SPANISH_ECUADOR - -.. data:: TT_MS_LANGID_BOSNIAN_BOSNIA_HERZEGOVINA - -.. data:: TT_MS_LANGID_CHINESE_GENERAL - -.. data:: TT_MS_LANGID_SPANISH_PARAGUAY - -.. data:: TT_MS_LANGID_HINDI_INDIA - -.. data:: TT_MS_LANGID_FRENCH_LUXEMBOURG - -.. data:: TT_MS_LANGID_TSWANA_SOUTH_AFRICA - -.. data:: TT_MS_LANGID_HUNGARIAN_HUNGARY - -.. data:: TT_MS_LANGID_CROATIAN_BOSNIA_HERZEGOVINA - -.. data:: TT_MS_LANGID_ENGLISH_SINGAPORE - -.. data:: TT_MS_LANGID_MALTESE_MALTA - -.. data:: TT_MS_LANGID_SAMI_NORTHERN_FINLAND - -.. data:: TT_MS_LANGID_FRENCH_CANADA - -.. data:: TT_MS_LANGID_SAMI_LULE_SWEDEN - -.. data:: TT_MS_LANGID_KANURI_NIGERIA - -.. data:: TT_MS_LANGID_IRISH_GAELIC_IRELAND - -.. data:: TT_MS_LANGID_ARABIC_SAUDI_ARABIA - -.. data:: TT_MS_LANGID_FRENCH_HAITI - -.. data:: TT_MS_LANGID_SPANISH_PUERTO_RICO - -.. data:: TT_MS_LANGID_BURMESE_MYANMAR - -.. data:: TT_MS_LANGID_POLISH_POLAND - -.. data:: TT_MS_LANGID_PORTUGUESE_PORTUGAL - -.. data:: TT_MS_LANGID_ENGLISH_CARIBBEAN - -.. data:: TT_MS_LANGID_KIRGHIZ_KIRGHIZ_REPUBLIC - -.. data:: TT_MS_LANGID_ICELANDIC_ICELAND - -.. data:: TT_MS_LANGID_BENGALI_INDIA - -.. data:: TT_MS_LANGID_HAUSA_NIGERIA - -.. data:: TT_MS_LANGID_BASQUE_SPAIN - -.. data:: TT_MS_LANGID_UIGHUR_CHINA - -.. data:: TT_MS_LANGID_ENGLISH_MALAYSIA - -.. data:: TT_MS_LANGID_FRENCH_MONACO - -.. data:: TT_MS_LANGID_SPANISH_BOLIVIA - -.. data:: TT_MS_LANGID_SORBIAN_GERMANY - -.. data:: TT_MS_LANGID_SINDHI_INDIA - -.. data:: TT_MS_LANGID_CHINESE_SINGAPORE - -.. data:: TT_MS_LANGID_FRENCH_COTE_D_IVOIRE - -.. data:: TT_MS_LANGID_SPANISH_SPAIN_TRADITIONAL_SORT - -.. data:: TT_MS_LANGID_SERBIAN_SERBIA_CYRILLIC - -.. data:: TT_MS_LANGID_SAMI_SKOLT_FINLAND - -.. data:: TT_MS_LANGID_SERBIAN_BOSNIA_HERZ_CYRILLIC - -.. data:: TT_MS_LANGID_MALAY_BRUNEI_DARUSSALAM - -.. data:: TT_MS_LANGID_ARABIC_JORDAN - -.. data:: TT_MS_LANGID_MONGOLIAN_MONGOLIA_MONGOLIAN - -.. data:: TT_MS_LANGID_SERBIAN_SERBIA_LATIN - -.. data:: TT_MS_LANGID_RUSSIAN_RUSSIA - -.. data:: TT_MS_LANGID_ROMANIAN_ROMANIA - -.. data:: TT_MS_LANGID_FRENCH_NORTH_AFRICA - -.. data:: TT_MS_LANGID_MONGOLIAN_MONGOLIA - -.. data:: TT_MS_LANGID_TSONGA_SOUTH_AFRICA - -.. data:: TT_MS_LANGID_SOMALI_SOMALIA - -.. data:: TT_MS_LANGID_SAAMI_LAPONIA - -.. data:: TT_MS_LANGID_SPANISH_COSTA_RICA - -.. data:: TT_MS_LANGID_ARABIC_SYRIA - -.. data:: TT_MS_LANGID_SPANISH_PANAMA - -.. data:: TT_MS_LANGID_PAPIAMENTU_NETHERLANDS_ANTILLES - -.. data:: TT_MS_LANGID_ASSAMESE_INDIA - -.. data:: TT_MS_LANGID_SCOTTISH_GAELIC_UNITED_KINGDOM - -.. data:: TT_MS_LANGID_DUTCH_NETHERLANDS - -.. data:: TT_MS_LANGID_SINDHI_PAKISTAN - -.. data:: TT_MS_LANGID_MACEDONIAN_MACEDONIA - -.. data:: TT_MS_LANGID_KAZAK_KAZAKSTAN - -.. data:: TT_MS_LANGID_AZERI_AZERBAIJAN_LATIN - -.. data:: TT_MS_LANGID_BELARUSIAN_BELARUS - -.. data:: TT_MS_LANGID_FRENCH_MOROCCO - -.. data:: TT_MS_LANGID_SERBIAN_BOSNIA_HERZ_LATIN - -.. data:: TT_MS_LANGID_ALBANIAN_ALBANIA - -.. data:: TT_MS_LANGID_SINHALESE_SRI_LANKA - -.. data:: TT_MS_LANGID_SPANISH_MEXICO - -.. data:: TT_MS_LANGID_ENGLISH_ZIMBABWE - -.. data:: TT_MS_LANGID_OROMO_ETHIOPIA - -.. data:: TT_MS_LANGID_INDONESIAN_INDONESIA - -.. data:: TT_MS_LANGID_SAMI_NORTHERN_NORWAY - -.. data:: TT_MS_LANGID_UZBEK_UZBEKISTAN_LATIN - -.. data:: TT_MS_LANGID_SLOVAK_SLOVAKIA - -.. data:: TT_MS_LANGID_KASHMIRI_INDIA - -.. data:: TT_MS_LANGID_GERMAN_SWITZERLAND - -.. data:: TT_MS_LANGID_URDU_INDIA - -.. data:: TT_MS_LANGID_FAEROESE_FAEROE_ISLANDS - -.. data:: TT_MS_LANGID_SYRIAC_SYRIA - -.. data:: TT_MS_LANGID_SPANISH_CHILE - -.. data:: TT_MS_LANGID_FILIPINO_PHILIPPINES - -.. data:: TT_MS_LANGID_ARABIC_YEMEN - -.. data:: TT_MS_LANGID_KONKANI_INDIA - -.. data:: TT_MS_LANGID_AMHARIC_ETHIOPIA - -.. data:: TT_MS_LANGID_ENGLISH_NEW_ZEALAND - -.. data:: TT_MS_LANGID_RHAETO_ROMANIC_SWITZERLAND - -.. data:: TT_MS_LANGID_ARABIC_TUNISIA - -.. data:: TT_MS_LANGID_SOTHO_SOUTHERN_SOUTH_AFRICA - -.. data:: TT_MS_LANGID_QUECHUA_PERU - -.. data:: TT_MS_LANGID_DANISH_DENMARK - -.. data:: TT_MS_LANGID_ENGLISH_PHILIPPINES - -.. data:: TT_MS_LANGID_SPANISH_NICARAGUA - -.. data:: TT_MS_LANGID_INUKTITUT_CANADA - -.. data:: TT_MS_LANGID_UKRAINIAN_UKRAINE - -.. data:: TT_MS_LANGID_NORWEGIAN_NORWAY_BOKMAL - -.. data:: TT_MS_LANGID_UZBEK_UZBEKISTAN_CYRILLIC - -.. data:: TT_MS_LANGID_FRENCH_BELGIUM - -.. data:: TT_MS_LANGID_ENGLISH_SOUTH_AFRICA - -.. data:: TT_MS_LANGID_HAWAIIAN_UNITED_STATES - -.. data:: TT_MS_LANGID_ARABIC_IRAQ - -.. data:: TT_MS_LANGID_KANNADA_INDIA - -.. data:: TT_MS_LANGID_DZONGHKA_BHUTAN - -.. data:: TT_MS_LANGID_CHINESE_TAIWAN - -.. data:: TT_MS_LANGID_SPANISH_UNITED_STATES - -.. data:: TT_MS_LANGID_ARMENIAN_ARMENIA - -.. data:: TT_MS_LANGID_LAO_LAOS - -.. data:: TT_MS_LANGID_TIGRIGNA_ERYTREA - -.. data:: TT_MS_LANGID_MARATHI_INDIA - -.. data:: TT_MS_LANGID_ARABIC_KUWAIT - -.. data:: TT_MS_LANGID_TAMAZIGHT_MOROCCO_LATIN - -.. data:: TT_MS_LANGID_PORTUGUESE_BRAZIL - -.. data:: TT_MS_LANGID_TIGRIGNA_ERYTHREA - -.. data:: TT_MS_LANGID_GREEK_GREECE - -.. data:: TT_MS_LANGID_URDU_PAKISTAN - -.. data:: TT_MS_LANGID_KIRGHIZ_KIRGHIZSTAN - -.. data:: TT_MS_LANGID_YIDDISH_GERMANY - -.. data:: TT_MS_LANGID_GERMAN_GERMANY - -.. data:: TT_MS_LANGID_TELUGU_INDIA - -.. data:: TT_MS_LANGID_AZERI_AZERBAIJAN_CYRILLIC - -.. data:: TT_MS_LANGID_KOREAN_JOHAB_KOREA - -.. data:: TT_MS_LANGID_ITALIAN_ITALY - -.. data:: TT_MS_LANGID_MAORI_NEW_ZEALAND - -.. data:: TT_MS_LANGID_SPANISH_VENEZUELA - -.. data:: TT_MS_LANGID_IGBO_NIGERIA - -.. data:: TT_MS_LANGID_IBIBIO_NIGERIA - -.. data:: TT_MS_LANGID_CHINESE_HONG_KONG - -.. data:: TT_MS_LANGID_FRENCH_SWITZERLAND - -.. data:: TT_MS_LANGID_BULGARIAN_BULGARIA - -.. data:: TT_MS_LANGID_FULFULDE_NIGERIA - -.. data:: TT_MS_LANGID_RUSSIAN_MOLDAVIA - -.. data:: TT_MS_LANGID_VENDA_SOUTH_AFRICA - -.. data:: TT_MS_LANGID_GEORGIAN_GEORGIA - -.. data:: TT_MS_LANGID_SWEDISH_FINLAND - diff --git a/third_party/freetype-py/doc/tt_name_ids.rst b/third_party/freetype-py/doc/tt_name_ids.rst deleted file mode 100644 index 4134db6..0000000 --- a/third_party/freetype-py/doc/tt_name_ids.rst +++ /dev/null @@ -1,50 +0,0 @@ -TT_NAME_IDS -=========== - -Possible values of the 'name' identifier field in the name records of the TTF -'name' table. These values are platform independent. - -.. data:: TT_NAME_ID_COPYRIGHT - -.. data:: TT_NAME_ID_FONT_FAMILY - -.. data:: TT_NAME_ID_FONT_SUBFAMILY - -.. data:: TT_NAME_ID_UNIQUE_ID - -.. data:: TT_NAME_ID_FULL_NAME - -.. data:: TT_NAME_ID_VERSION_STRING - -.. data:: TT_NAME_ID_PS_NAME - -.. data:: TT_NAME_ID_TRADEMARK - -.. data:: TT_NAME_ID_MANUFACTURER - -.. data:: TT_NAME_ID_DESIGNER - -.. data:: TT_NAME_ID_DESCRIPTION - -.. data:: TT_NAME_ID_VENDOR_URL - -.. data:: TT_NAME_ID_DESIGNER_URL - -.. data:: TT_NAME_ID_LICENSE - -.. data:: TT_NAME_ID_LICENSE_URL - -.. data:: TT_NAME_ID_PREFERRED_FAMILY - -.. data:: TT_NAME_ID_PREFERRED_SUBFAMILY - -.. data:: TT_NAME_ID_MAC_FULL_NAME - -.. data:: TT_NAME_ID_SAMPLE_TEXT - -.. data:: TT_NAME_ID_CID_FINDFONT_NAME - -.. data:: TT_NAME_ID_WWS_FAMILY - -.. data:: TT_NAME_ID_WWS_SUBFAMILY - diff --git a/third_party/freetype-py/doc/tt_platforms.rst b/third_party/freetype-py/doc/tt_platforms.rst deleted file mode 100644 index fd9a806..0000000 --- a/third_party/freetype-py/doc/tt_platforms.rst +++ /dev/null @@ -1,47 +0,0 @@ -TT_PLATFORMS -============ - -A list of valid values for the 'platform_id' identifier code in FT_CharMapRec -and FT_SfntName structures. - - -.. data:: TT_PLATFORM_APPLE_UNICODE - - Used by Apple to indicate a Unicode character map and/or name entry. See - TT_APPLE_ID_XXX for corresponding 'encoding_id' values. Note that name - entries in this format are coded as big-endian UCS-2 character codes only. - - -.. data:: TT_PLATFORM_MACINTOSH - - Used by Apple to indicate a MacOS-specific charmap and/or name entry. See - TT_MAC_ID_XXX for corresponding 'encoding_id' values. Note that most TrueType - fonts contain an Apple roman charmap to be usable on MacOS systems (even if - they contain a Microsoft charmap as well). - - -.. data:: TT_PLATFORM_ISO - - This value was used to specify ISO/IEC 10646 charmaps. It is however now - deprecated. See TT_ISO_ID_XXX for a list of corresponding 'encoding_id' - values. - - -.. data:: TT_PLATFORM_MICROSOFT - - Used by Microsoft to indicate Windows-specific charmaps. See TT_MS_ID_XXX for - a list of corresponding 'encoding_id' values. Note that most fonts contain a - Unicode charmap using (TT_PLATFORM_MICROSOFT, TT_MS_ID_UNICODE_CS). - - -.. data:: TT_PLATFORM_CUSTOM - - Used to indicate application-specific charmaps. - - -.. data:: TT_PLATFORM_ADOBE - - This value isn't part of any font format specification, but is used by - FreeType to report Adobe-specific charmaps in an FT_CharMapRec structure. See - TT_ADOBE_ID_XXX. - diff --git a/third_party/freetype-py/doc/usage.rst b/third_party/freetype-py/doc/usage.rst deleted file mode 100644 index 8d6e40d..0000000 --- a/third_party/freetype-py/doc/usage.rst +++ /dev/null @@ -1,12 +0,0 @@ -============= -Usage example -============= - -.. code:: python - - import freetype - face = freetype.Face("Vera.ttf") - face.set_char_size( 48*64 ) - face.load_char('S') - bitmap = face.glyph.bitmap - print bitmap.buffer -- cgit v1.2.3