diff options
Diffstat (limited to 'cursesmodule/Makefile.pre')
| -rw-r--r-- | cursesmodule/Makefile.pre | 274 |
1 files changed, 274 insertions, 0 deletions
diff --git a/cursesmodule/Makefile.pre b/cursesmodule/Makefile.pre new file mode 100644 index 0000000..03834a9 --- /dev/null +++ b/cursesmodule/Makefile.pre @@ -0,0 +1,274 @@ +# Generated automatically from Makefile.pre.in by sedscript. +# Universal Unix Makefile for Python extensions +# ============================================= + +# Short Instructions +# ------------------ + +# 1. Build and install Python (1.4 or newer). +# 2. "make -f Makefile.pre.in boot" +# 3. "make" +# You should now have a shared library. + +# Long Instructions +# ----------------- + +# Build *and install* the basic Python 1.4 distribution. See the +# Python README for instructions. + +# Create a file Setup.in for your extension. This file follows the +# format of the Modules/Setup.in file; see the instructions there. +# For a simple module called "spam" on file "spammodule.c", it can +# contain a single line: +# spam spammodule.c +# You can build as many modules as you want in the same directory -- +# just have a separate line for each of them in the Setup.in file. + +# If you want to build your extension as a shared library, insert a +# line containing just the string +# *shared* +# at the top of your Setup.in file. + +# Note that the build process copies Setup.in to Setup, and then works +# with Setup. It doesn't overwrite Setup when Setup.in is changed, so +# while you're in the process of debugging your Setup.in file, you may +# want to edit Setup instead, and copy it back to Setup.in later. +# (All this is done so you can distribute your extension easily and +# someone else can select the modules they actually want to build by +# commenting out lines in the Setup file, without editing the +# original. Editing Setup is also used to specify nonstandard +# locations for include or library files.) + +# Copy this file (Misc/Makefile.pre.in) to the directory containing +# your extension. + +# Run "make -f Makefile.pre.in boot". This creates Makefile +# (producing Makefile.pre and sedscript as intermediate files) and +# config.c, incorporating the values for sys.prefix, sys.exec_prefix +# and sys.version from the installed Python binary. For this to work, +# the python binary must be on your path. If this fails, try +# make -f Makefile.pre.in Makefile VERSION=1.4 installdir=<prefix> +# where <prefix> is the prefix used to install Python for installdir +# (and possibly similar for exec_installdir=<exec_prefix>). + +# If you are building your extension as a shared library (your +# Setup.in file starts with *shared*), run "make" or "make sharedmods" +# to build the shared library files. If you are building a statically +# linked Python binary (the only solution of your platform doesn't +# support shared libraries, and sometimes handy if you want to +# distribute or install the resulting Python binary), run "make +# python". + +# Note: Each time you edit Makefile.pre.in or Setup, you must run +# "make Makefile" before running "make". + +# Hint: if you want to use VPATH, you can start in an empty +# subdirectory and say (e.g.): +# make -f ../Makefile.pre.in boot srcdir=.. VPATH=.. + + +# === Bootstrap variables (edited through "make boot") === + +# The prefix used by "make inclinstall libainstall" of core python +installdir= /usr/local + +# The exec_prefix used by the same +exec_installdir=/usr/local + +# Source directory and VPATH in case you want to use VPATH. +# (You will have to edit these two lines yourself -- there is no +# automatic support as the Makefile is not generated by +# config.status.) +srcdir= . +VPATH= . + +# === Variables that you may want to customize (rarely) === + +# (Static) build target +TARGET= python + +# Add more -I and -D options here +CFLAGS= $(OPT) -I$(INCLUDEPY) -I$(LIBPL) $(DEFS) + +# These two variables can be set in Setup to merge extensions. +# See example[23]. +BASELIB= +BASESETUP= + +# === Variables set by makesetup === + +MODOBJS= _MODOBJS_ +MODLIBS= _MODLIBS_ + +# === Definitions added by makesetup === + +# === Variables from configure (through sedscript) === + +VERSION= 1.5 +CC= gcc +OPT= -g -O2 +LDFLAGS= +DEFS= -DHAVE_CONFIG_H +LIBS= -lieee -ldl -lpthread +LIBM= -lm +LIBC= +RANLIB= ranlib +MACHDEP= linux2 +SO= .so +LDSHARED= gcc -shared +CCSHARED= -fpic +LINKFORSHARED= -Xlinker -export-dynamic + +# Install prefix for architecture-independent files +prefix= /usr/local + +# Install prefix for architecture-dependent files +exec_prefix= ${prefix} + +# === Fixed definitions === + +# Shell used by make (some versions default to the login shell, which is bad) +SHELL= /bin/sh + +# Expanded directories +BINDIR= $(exec_installdir)/bin +LIBDIR= $(exec_prefix)/lib +MANDIR= $(installdir)/man +INCLUDEDIR= $(installdir)/include +SCRIPTDIR= $(prefix)/lib + +# Detailed destination directories +BINLIBDEST= $(LIBDIR)/python$(VERSION) +LIBDEST= $(SCRIPTDIR)/python$(VERSION) +INCLUDEPY= $(INCLUDEDIR)/python$(VERSION) +LIBP= $(exec_installdir)/lib/python$(VERSION) + +LIBPL= $(LIBP)/config + +PYTHONLIBS= $(LIBPL)/libModules.a \ + $(LIBPL)/libPython.a \ + $(LIBPL)/libObjects.a \ + $(LIBPL)/libParser.a + +MAKESETUP= $(LIBPL)/makesetup +MAKEFILE= $(LIBPL)/Makefile +CONFIGC= $(LIBPL)/config.c +CONFIGCIN= $(LIBPL)/config.c.in +SETUP= $(LIBPL)/Setup + +SYSLIBS= $(LIBM) $(LIBC) + +ADDOBJS= $(LIBPL)/main.o getpath.o config.o + +# === Fixed rules === + +# Default target. This builds shared libraries only +default: sharedmods + +# Build everything +all: static sharedmods + +# Build shared libraries from our extension modules +sharedmods: $(SHAREDMODS) + +# Build a static Python binary containing our extension modules +static: $(TARGET) +$(TARGET): $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB) + $(CC) $(LDFLAGS) $(ADDOBJS) lib.a $(PYTHONLIBS) \ + $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \ + -o $(TARGET) + +# Build the library containing our extension modules +lib.a: $(MODOBJS) + -rm -f lib.a + ar cr lib.a $(MODOBJS) + -$(RANLIB) lib.a || \ + echo "don't worry if ranlib fails -- probably SYSV or equiv" + +# This runs makesetup *twice* to use the BASESETUP definition from Setup +config.c Makefile: Makefile.pre Setup $(BASESETUP) $(MAKESETUP) + $(MAKESETUP) \ + -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP) + $(MAKE) -f Makefile do-it-again + +# Internal target to run makesetup for the second time +do-it-again: + $(MAKESETUP) \ + -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP) + +# Make config.o from the config.c created by makesetup +config.o: config.c + $(CC) $(CFLAGS) -c config.c + +# Make our own private getpath.o from the installed source and our PYTHONPATH +getpath.o: $(LIBPL)/getpath.c Makefile + $(CC) $(CFLAGS) -DPYTHONPATH=\"$(PYTHONPATH)\" -c $(LIBPL)/getpath.c + +# Setup is copied from Setup.in *only* if it doesn't yet exist +Setup: + cp $(srcdir)/Setup.in Setup + +# Make the intermediate Makefile.pre from Makefile.pre.in +Makefile.pre: Makefile.pre.in sedscript + sed -f sedscript $(srcdir)/Makefile.pre.in >Makefile.pre + +# Shortcuts to make the sed arguments on one line +P=prefix +E=exec_prefix +H=Generated automatically from Makefile.pre.in by sedscript. +L=LINKFORSHARED + +# Make the sed script used to create Makefile.pre from Makefile.pre.in +sedscript: $(MAKEFILE) + sed -n \ + -e '1s/.*/1i\\/p' \ + -e '2s%.*%# $H%p' \ + -e '/^VERSION=/s/^VERSION=[ ]*\(.*\)/s%@VERSION[@]%\1%/p' \ + -e '/^CC=/s/^CC=[ ]*\(.*\)/s%@CC[@]%\1%/p' \ + -e '/^OPT=/s/^OPT=[ ]*\(.*\)/s%@OPT[@]%\1%/p' \ + -e '/^LDFLAGS=/s/^LDFLAGS=[ ]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \ + -e '/^DEFS=/s/^DEFS=[ ]*\(.*\)/s%@DEFS[@]%\1%/p' \ + -e '/^LIBS=/s/^LIBS=[ ]*\(.*\)/s%@LIBS[@]%\1%/p' \ + -e '/^LIBM=/s/^LIBM=[ ]*\(.*\)/s%@LIBM[@]%\1%/p' \ + -e '/^LIBC=/s/^LIBC=[ ]*\(.*\)/s%@LIBC[@]%\1%/p' \ + -e '/^RANLIB=/s/^RANLIB=[ ]*\(.*\)/s%@RANLIB[@]%\1%/p' \ + -e '/^MACHDEP=/s/^MACHDEP=[ ]*\(.*\)/s%@MACHDEP[@]%\1%/p' \ + -e '/^SO=/s/^SO=[ ]*\(.*\)/s%@SO[@]%\1%/p' \ + -e '/^LDSHARED=/s/^LDSHARED=[ ]*\(.*\)/s%@LDSHARED[@]%\1%/p' \ + -e '/^CCSHARED=/s/^CCSHARED=[ ]*\(.*\)/s%@CCSHARED[@]%\1%/p' \ + -e '/^$L=/s/^$L=[ ]*\(.*\)/s%@$L[@]%\1%/p' \ + -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \ + -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \ + $(MAKEFILE) >sedscript + echo "/^installdir=/s%=.*%= $(installdir)%" >>sedscript + echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript + echo "/^srcdir=/s%=.*%= $(srcdir)%" >>sedscript + echo "/^VPATH=/s%=.*%= $(VPATH)%" >>sedscript + echo "/^LINKPATH=/s%=.*%= $(LINKPATH)%" >>sedscript + echo "/^BASELIB=/s%=.*%= $(BASELIB)%" >>sedscript + echo "/^BASESETUP=/s%=.*%= $(BASESETUP)%" >>sedscript + +# Bootstrap target +boot: clobber + VERSION=`python -c "import sys; print sys.version[:3]"`; \ + installdir=`python -c "import sys; print sys.prefix"`; \ + exec_installdir=`python -c "import sys; print sys.exec_prefix"`; \ + $(MAKE) -f $(srcdir)/Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \ + VERSION=$$VERSION \ + installdir=$$installdir \ + exec_installdir=$$exec_installdir \ + Makefile + +# Handy target to remove intermediate files and backups +clean: + -rm -f *.o *~ + +# Handy target to remove everything that is easily regenerated +clobber: clean + -rm -f *.a tags TAGS config.c Makefile.pre python sedscript + -rm -f *.so *.sl so_locations + + +# Handy target to remove everything you don't want to distribute +distclean: clobber + -rm -f Makefile Setup |