diff options
| author | venaas <venaas> | 2008-07-22 12:41:10 +0000 |
|---|---|---|
| committer | venaas <venaas@e88ac4ed-0b26-0410-9574-a7f39faa03bf> | 2008-07-22 12:41:10 +0000 |
| commit | 76a698abf096fbd3aa974b469dde8006dcd01c94 (patch) | |
| tree | 1ffd54a41e5152aabd6993b4e0d1d5ffb6414bed /radsecproxy.conf.5 | |
| parent | ceac2d9d64b6cf9735cee2689af2500731a61535 (diff) | |
updated manpage for Listen options
git-svn-id: https://svn.testnett.uninett.no/radsecproxy/trunk@319 e88ac4ed-0b26-0410-9574-a7f39faa03bf
Diffstat (limited to 'radsecproxy.conf.5')
| -rw-r--r-- | radsecproxy.conf.5 | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/radsecproxy.conf.5 b/radsecproxy.conf.5 index 6d538da..5e08773 100644 --- a/radsecproxy.conf.5 +++ b/radsecproxy.conf.5 @@ -104,20 +104,25 @@ option is ignored if \fB-f\fR is specified on the command line. .TP \fBListenUDP\fR Normally the proxy will listen to the standard RADIUS UDP port \fB1812\fR if -configured to handle UDP clients. On most systems it will do this for all of the -system's IP addresses (both IPv4 and IPv6). On some systems however, it may respond -to only IPv4 or only IPv6. To specify an alternate port you may use a value of +configured to handle UDP clients. To specify an alternate port you may use a +value of the form \fB*:port\fR where port is any valid port number. If you also want to specify a specific address you can do e.g. \fB192.168.1.1:1812\fR or \fB[2001:db8::1]:1812\fR. The port may be omitted if you want the default one (like in these examples). These examples are equivalent to \fB192.168.1.1\fR and \fB2001:db8::1\fR. Note that you must use brackets around the IPv6 address if -you specify port number. +you specify port number. The option may be specified multiple times to listen +to multiple addresses and/or ports. .sp .TP \fBListenTCP\fR This is similar to the \fBListenUDP\fR option, except that it used for receiving -connections from TCP clients. The default port number is \fB2083\fR. +connections from TCP clients. The default port number is \fB1812\fR. +.sp +.TP +\fBListenTLS\fR +This is similar to the \fBListenUDP\fR option, except that it used for receiving +connections from TLS clients. The default port number is \fB2083\fR. .sp .TP \fBListenAccountingUDP\fR |