|author||Michael Tokarev <email@example.com>||2014-12-20 08:48:44 +0000|
|committer||Michael Tokarev <firstname.lastname@example.org>||2014-12-20 08:48:44 +0000|
mdadm (3.3.2-5) unstable; urgency=medium
* use-tempnode-not-devnode.patch: change udev rules file to use $tempnode which works both on wheezy and jessie udev, instead of $devnode which only works in jessie. At this stage it is better to make rules file compatible with old version instead of adding versioned dependency. Should be removed for jessie+1. (Closes: #770883) * fix Closes: list in previous entry (Closes: #771852) # imported from the archive
Diffstat (limited to 'README.initramfs')
1 files changed, 123 insertions, 0 deletions
diff --git a/README.initramfs b/README.initramfs
new file mode 100644
@@ -0,0 +1,123 @@
+Assembling md arrays at boot time.
+These notes apply to 2.6 kernels only and, in some cases,
+to 2.6.15 or later.
+Md arrays can be assembled at boot time using the 'autodetect' functionality
+which is triggered by storing components of an array in partitions of type
+'fd' - Linux Raid Autodetect.
+They can also be assembled by specifying the component devices in a
+kernel parameter such as
+In this case, /dev/md0 will be assembled (because of the 0) from the listed
+These mechanisms, while useful, do not provide complete functionality
+and are unlikely to be extended. The preferred way to assemble md
+arrays at boot time is using 'mdadm' or 'mdassemble' (which is a
+trimmed-down mdadm). To assemble an array which contains the root
+filesystem, mdadm needs to be run before that filesystem is mounted,
+and so needs to be run from an initial-ram-fs. It is how this can
+work that is the primary focus of this document.
+It should be noted up front that only the array containing the root
+filesystem should be assembled from the initramfs. Any other arrays
+should be assembled under the control of files on the main filesystem
+as this enhanced flexibility and maintainability.
+A minimal initramfs for assembling md arrays can be created using 3
+files and one directory. These are:
+/bin/mdadm statically linked mdadm binary
+/bin/busybox statically linked busybox binary
+/bin/sh hard link to /bin/busybox
+/init a shell script which call mdadm appropriately.
+An example init script is:
+echo 'Auto-assembling boot md array'
+mount -t proc proc /proc
+if [ -n "$rootuuid" ]
+elif [ -n "$mdminor" ]
+echo "Using $arg"
+mdadm -Acpartitions $arg --auto=part /dev/mda
+mount /dev/mda1 /root || mount /dev/mda /root
+exec chroot . /sbin/init < /dev/console > /dev/console 2>&1
+This could certainly be extended, or merged into a larger init script.
+Though tested and in production use, it is not presented here as
+"The Right Way" to do it, but as a useful example.
+Some key points are:
+ /proc needs to be mounted so that /proc/partitions can be accessed
+ by mdadm, and so that /proc/filesystems can be accessed by mount.
+ The uuid of the array can be passed in as a kernel parameter
+ (rootuuid). As the kernel doesn't use this value, it is made available
+ in the environment for /init
+ If no uuid is given, we default to md0, (--super-minor=0) which is a
+ commonly used to store the root filesystem. This may not work in
+ all situations.
+ We assemble the array as a partitionable array (/dev/mda) even if we
+ end up using the whole array. There is no cost in using the partitionable
+ interface, and in this context it is simpler.
+ We try mounting both /dev/mda1 and /dev/mda as they are the most like
+ part of the array to contain the root filesystem.
+ The --auto flag is given to mdadm so that it will create /dev/md*
+ files automatically. This is needed as /dev will not contain
+ and md files, and udev will not create them (as udev only created device
+ files after the device exists, and mdadm need the device file to create
+ the device). Note that the created md files may not exist in /dev
+ of the mounted root filesystem. This needs to be deal with separately
+ from mdadm - possibly using udev.
+ We do not need to create device files for the components which will
+ be assembled into /dev/mda. mdadm finds the major/minor numbers from
+ /proc/partitions and creates a temporary /dev file if one doesn't already
+The script "mkinitramfs" which is included with the mdadm distribution
+can be used to create a minimal initramfs. It creates a file called
+'init.cpio.gz' which can be specified as an 'initrd' to lilo or grub
+(or whatever boot loader is being used).
+Resume from an md array
+If you want to make use of the suspend-to-disk/resume functionality in Linux,
+and want to have swap on an md array, you will need to assemble the array
+before resume is possible.
+However, because the array is active in the resumed image, you do not want
+anything written to any drives during the resume process, such as superblock
+updates or array resync.
+This can be achieved in 2.6.15-rc1 and later kernels using the
+'start_readonly' module parameter.
+Simply include the command
+ echo 1 > /sys/module/md_mod/parameters/start_ro
+before assembling the array with 'mdadm'.
+You can then echo
+or whatever is appropriate to /sys/power/resume to trigger the resume.