Load newtrunk into mdadm/trunk.

1 files changed, 205 insertions, 0 deletions

diff --git a/debian/po/fr.po b/debian/po/fr.po
new file mode 100644
index 00000000..def437cb
--- /dev/null
+++ b/debian/po/fr.po
@@ -0,0 +1,205 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: mdadm\n"
+"Report-Msgid-Bugs-To: pkg-mdadm-devel@lists.alioth.debian.org\n"
+"POT-Creation-Date: 2006-07-07 17:30+0200\n"
+"PO-Revision-Date: 2005-08-13 12:30+0200\n"
+"Last-Translator: Eric Madesclair<eric-m@wanadoo.fr>\n"
+"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../mdadm.templates:1001
+msgid "Initialise the superblock if you reuse hard disks"
+msgstr "Si vous réutilisez des disques durs, initialisez leur superbloc."
+
+#. Type: note
+#. Description
+#: ../mdadm.templates:1002
+#, fuzzy
+msgid ""
+"WARNING! If you are using hard disks which have RAID superblocks from "
+"earlier installations in different RAID arrays, you MUST zero each "
+"superblock *before* activating the autostart feature."
+msgstr ""
+"ATTENTION : Si vous utilisez des disques durs dont le superbloc a déjà été "
+"écrit par md lors d'une installation dans une autre matrice RAID, vous DEVEZ "
+"effacer leur superbloc avant d'activer le démarrage automatique."
+
+#. Type: note
+#. Description
+#: ../mdadm.templates:1003
+msgid ""
+"To do this, do not start the RAID devices automatically. First, zero the "
+"superblock (mdadm --zero-superblock /dev/mdX). Next, use `dpkg-reconfigure "
+"mdadm` to reactivate the autostart feature."
+msgstr ""
+"Pour faire cela, vous ne devez pas démarrer automatiquement les "
+"périphériques RAID. Commencez par effacer le superbloc (mdadm --zero-"
+"superblock /dev/xxx) puis activez le démarrage automatique en utilisant "
+"« dpkg-reconfigure mdadm »."
+
+#. Type: note
+#. Description
+#: ../mdadm.templates:1004
+msgid ""
+"If you manage your RAIDs otherwise (e.g. EVMS), either disable autostart, or "
+"ensure that /etc/mdadm/mdadm.conf only lists those arrays you want to start "
+"by mdadm."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../mdadm.templates:2001
+msgid "RAID arrays needed for the root filesystem:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../mdadm.templates:2002
+msgid ""
+"If your system has its root filesystem on a RAID volume, it needs to be "
+"started early during the boot sequence. If your root filesystem is on a "
+"logical volume (LVM), which is on RAID, all constituent arrays need to be "
+"started."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../mdadm.templates:2003
+msgid ""
+"If you know exactly which arrays are needed to bring up the root filesystem, "
+"enter them here. Alternatively, enter 'all' to simply start all available "
+"arrays. If you do not need or want to start any arrays for the root "
+"filesystem, leave the answer blank (or enter 'none')."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../mdadm.templates:2004
+msgid ""
+"You have the option to start all other arrays (those not needed for the root "
+"filesystem) later in the boot sequence. Doing so will give you greater "
+"control over the arrays with the mdadm configuration file. Starting all "
+"arrays at boot-time may be safer though."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../mdadm.templates:2005
+msgid ""
+"Please enter a space-separated list of devices, or 'all'. You may omit the "
+"leading '/dev/' and just enter e.g. \"md0 md1\"."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../mdadm.templates:3001
+#, fuzzy
+msgid "Do you want to start RAID devices automatically?"
+msgstr "Voulez-vous démarrer automatiquement les périphériques RAID ?"
+
+#. Type: boolean
+#. Description
+#: ../mdadm.templates:3002
+msgid ""
+"Once the base system has come up, mdadm can start all RAID devices specified "
+"in /etc/mdadm/mdadm.conf, which have not yet been started. Unless you have "
+"compiled RAID support into the kernel (in which case all RAID arrays with "
+"partitions of type 0xfd (and only those) are started automatically anyway), "
+"this is probably what you want."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../mdadm.templates:4001
+msgid "Should mdadm run monthly parity checks of the RAID arrays?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../mdadm.templates:4002
+msgid ""
+"If your kernel supports it (>> 2.6.14), mdadm can periodically check the "
+"parity of your RAID devices. This may be a resource-intensive process, "
+"depending on your setup, but it could help prevent rare cases of data loss."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../mdadm.templates:4003
+msgid ""
+"The default, if turned on, is to run the checks on the first Sunday of every "
+"month at 01:06 o'clock."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../mdadm.templates:5001
+#, fuzzy
+msgid "Do you want to start the RAID monitoring daemon?"
+msgstr "Voulez-vous démarrer le démon de surveillance RAID ?"
+
+#. Type: boolean
+#. Description
+#: ../mdadm.templates:5002
+msgid ""
+"The RAID monitor daemon sends email notifications in response to important "
+"RAID events (such as a disk failure). You probably want to enable it."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../mdadm.templates:6001
+#, fuzzy
+msgid "Recipient for email notifications:"
+msgstr "Destinataire des notifications par courriel :"
+
+#. Type: string
+#. Description
+#: ../mdadm.templates:6002
+#, fuzzy
+msgid ""
+"Please enter the email address of the user who should get the email "
+"notification for these important RAID events."
+msgstr ""
+"Veuillez indiquer l'adresse électronique de l'utilisateur qui doit recevoir "
+"les notifications si l'état des périphériques RAID change."
+
+#~ msgid ""
+#~ "If RAID devices are started automatically, all RAID devices are "
+#~ "discovered and assembled automatically at system startup. This option "
+#~ "should only be used if the md driver is compiled as a module. If it is "
+#~ "compiled into your kernel, the automatic startup will be performed at "
+#~ "boot time by the kernel and therefore you should not choose this option."
+#~ msgstr ""
+#~ "Si les périphériques RAID sont démarrés automatiquement, ceux-ci peuvent "
+#~ "être recherchés et réunis automatiquement au démarrage du système. Cela "
+#~ "n'est possible que si vous utilisez le pilote md en module. S'il est "
+#~ "compilé dans le noyau, celui-ci démarre les périphériques automatiquement "
+#~ "et vous n'avez donc pas besoin de sélectionner cette option."
+
+#~ msgid ""
+#~ "When the RAID monitor daemon runs, email notifications are sent when a "
+#~ "disk belonging to a RAID array fails or changes its status for some "
+#~ "reason."
+#~ msgstr ""
+#~ "Quand le démon de surveillance des périphériques RAID est utilisé, une "
+#~ "notification par courriel est envoyée en cas de défaillance ou de "
+#~ "changement d'état d'un disque appartenant à un ensemble RAID."