diff options
author | Michael Tokarev <mjt@tls.msk.ru> | 2014-12-20 08:48:44 +0000 |
---|---|---|
committer | Michael Tokarev <mjt@tls.msk.ru> | 2014-12-20 08:48:44 +0000 |
commit | 489bea7ee8e1dbecfa517b8415568044ab57c73a (patch) | |
tree | 44d4878d4c7da3f4908ea9a765ef9b8f9c141756 /mdadm.conf-example |
mdadm (3.3.2-5) unstable; urgency=medium
* use-tempnode-not-devnode.patch: change udev rules file to use
$tempnode which works both on wheezy and jessie udev, instead
of $devnode which only works in jessie. At this stage it is
better to make rules file compatible with old version instead
of adding versioned dependency. Should be removed for jessie+1.
(Closes: #770883)
* fix Closes: list in previous entry (Closes: #771852)
# imported from the archive
Diffstat (limited to 'mdadm.conf-example')
-rw-r--r-- | mdadm.conf-example | 65 |
1 files changed, 65 insertions, 0 deletions
diff --git a/mdadm.conf-example b/mdadm.conf-example new file mode 100644 index 00000000..d9d8d396 --- /dev/null +++ b/mdadm.conf-example @@ -0,0 +1,65 @@ +# mdadm configuration file +# +# mdadm will function properly without the use of a configuration file, +# but this file is useful for keeping track of arrays and member disks. +# In general, a mdadm.conf file is created, and updated, after arrays +# are created. This is the opposite behavior of /etc/raidtab which is +# created prior to array construction. +# +# +# the config file takes two types of lines: +# +# DEVICE lines specify a list of devices of where to look for +# potential member disks +# +# ARRAY lines specify information about how to identify arrays so +# so that they can be activated +# +# You can have more than one device line and use wild cards. The first +# example includes SCSI the first partition of SCSI disks /dev/sdb, +# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second +# line looks for array slices on IDE disks. +# +#DEVICE /dev/sd[bcdjkl]1 +#DEVICE /dev/hda1 /dev/hdb1 +# +# If you mount devfs on /dev, then a suitable way to list all devices is: +#DEVICE /dev/discs/*/* +# +# +# The AUTO line can control which arrays get assembled by auto-assembly, +# meaing either "mdadm -As" when there are no 'ARRAY' lines in this file, +# or "mdadm --incremental" when the array found is not listed in this file. +# By default, all arrays that are found are assembled. +# If you want to ignore all DDF arrays (maybe they are managed by dmraid), +# and only assemble 1.x arrays if which are marked for 'this' homehost, +# but assemble all others, then use +#AUTO -ddf homehost -1.x +all +# +# ARRAY lines specify an array to assemble and a method of identification. +# Arrays can currently be identified by using a UUID, superblock minor number, +# or a listing of devices. +# +# super-minor is usually the minor number of the metadevice +# UUID is the Universally Unique Identifier for the array +# Each can be obtained using +# +# mdadm -D <md> +# +#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371 +#ARRAY /dev/md1 super-minor=1 +#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1 +# +# ARRAY lines can also specify a "spare-group" for each array. mdadm --monitor +# will then move a spare between arrays in a spare-group if one array has a failed +# drive but no spare +#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1 +#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1 +# +# When used in --follow (aka --monitor) mode, mdadm needs a +# mail address and/or a program. This can be given with "mailaddr" +# and "program" lines to that monitoring can be started using +# mdadm --follow --scan & echo $! > /run/mdadm/mon.pid +# If the lines are not found, mdadm will exit quietly +#MAILADDR root@mydomain.tld +#PROGRAM /usr/sbin/handle-mdadm-events |