diff options
Diffstat (limited to 'debian/mdadm-raid')
| -rw-r--r-- | debian/mdadm-raid | 256 |
1 files changed, 0 insertions, 256 deletions
diff --git a/debian/mdadm-raid b/debian/mdadm-raid deleted file mode 100644 index 6d4d6a99..00000000 --- a/debian/mdadm-raid +++ /dev/null @@ -1,256 +0,0 @@ -#!/bin/sh -# -# Start all arrays specified in the configuration file. -# -# Copyright © 2001-2005 Mario Jou/3en <joussen@debian.org> -# Copyright © 2005-2008 Martin F. Krafft <madduck@debian.org> -# Distributable under the terms of the GNU GPL version 2. -# -### BEGIN INIT INFO -# Provides: mdadm-raid -# Required-Start: mountkernfs hostname -# Should-Start: udev multipath-tools-boot -# X-Start-Before: checkfs mountall -# Required-Stop: mountkernfs -# Should-Stop: udev -# X-Stop-After: umountfs -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: MD array assembly -# Description: This script assembles a system's MD arrays, according to -# the settings in /etc/mdadm/mdadm.conf and the preferences -# in /etc/default/mdadm. -### END INIT INFO -# -set -eu - -MDADM=/sbin/mdadm -CONFIG=/etc/mdadm/mdadm.conf -ALTCONFIG=/etc/mdadm.conf -DEBIANCONFIG=/etc/default/mdadm - -test -x "$MDADM" || exit 0 - -STATEDIR=/run/mdadm -test -f $DEBIANCONFIG && . $DEBIANCONFIG - -. /lib/lsb/init-functions - -short_dev() -{ - local dev; dev=${1##*/} - case "$dev" in - md*|md_*|mdp*|mdp_*) echo "$dev";; - d*) echo "md_${dev}";; - *) echo "md${dev}";; - esac -} - -log() -{ - case "$1" in - [[:digit:]]*) success=$1; shift;; - *) :;; - esac - log_action_begin_msg "$1"; shift - log_action_end_msg ${success:-0} "$*" -} - -log_dev() -{ - success=${1:-}; shift - dev=${1:-}; shift - log $success "${PREFIX:-} $(short_dev ${dev:-})" "$*" -} - -log_notice() -{ - log 0 "${PREFIX:-}s" "$*" -} - -log_problem() -{ - log 1 "${PREFIX:-}s" "$*" -} - -is_true() -{ - case "${1:-}" in - [Yy]es|[Yy]|1|[Tt]rue|[Tt]) return 0;; - *) return 1;; - esac -} - -case "${1:-}" in - - start) - PREFIX="Assembling MD array" - - if [ ! -f /proc/mdstat ] && [ -x "$(command -v modprobe)" ] ; then - modprobe -q md 2>/dev/null || : - fi - if [ ! -f /proc/mdstat ]; then - log_problem "failed to load MD subsystem" - exit 0 - fi - - if [ ! -f $CONFIG -a ! -f $ALTCONFIG ]; then - log_problem "no $CONFIG file" - exit 0 - fi - - # handle devfs-style names and version-1 devices - # fail gracefully in case we're on a read-only filesystem, in which - # case it's safe to assume that the admin knows what s/he's doing. - # See (#382876). - mkdir --parent /dev/md || : - - # ugly hack because shell sucks - IFSOLD=${IFS:-} - IFS=' -' - for line in $($MDADM --assemble --scan --auto=yes --symlink=no 2>&1); do - IFS=$IFSOLD - set -- $line - shift - - case "$@" in - - 'No arrays found in config file'*) - # no point in carrying on. - shift - log_notice "no $*" - exit 0 - ;; - - 'Unknown keyword'*) - # warn only - if [ -x $(command -v logger >/dev/null) ]; then - logger -t mdadm -p syslog.warning -- "$*" - elif [ -w /dev/console ]; then - echo "mdadm: $*" > /dev/console - else - echo "mdadm: $*" >&2 - fi - ;; - - *' is already active.') - log_dev 0 $1 "already running" - ;; - - *'has been started with '[[:digit:]]*' drive'*' (out of '[[:digit:]]*') and '[[:digit:]]*' spare'*'.') - log_dev 0 $1 "initialising [$6/${10%).}]" - ;; - - *'has been started with '[[:digit:]]*' drive'*' (out of '[[:digit:]]*').') - log_dev 0 $1 "degraded [$6/${10%).}]" - ;; - - *'has been started with '[[:digit:]]*' drive'*'.') - log_dev 0 $1 "started [$6/$6]" - ;; - - *'assembled from '[[:digit:]]*' drive'*' - not enough to start the array.') - log_dev 1 $1 "not enough devices" - ;; - - 'no devices found for '*) - log_dev 1 $5 "no devices found" - ;; - - 'failed to RUN_ARRAY '*': Input/output error') - log_dev 1 ${4%:} "RUN_ARRAY input/output error" - ;; - - *) :;; - esac - done - ret=$? - - log_action_begin_msg "Generating udev events for MD arrays" - [ -d $STATEDIR ] || mkdir -p $STATEDIR - for uevent in /sys/block/md*/uevent; do - test -e $uevent || break - sentinel=${uevent#/sys/block/}; sentinel=${sentinel%/uevent}-uevent - test -e $STATEDIR/$sentinel && continue - test -w $uevent || continue - echo add > $uevent - test -d $STATEDIR && : > $STATEDIR/$sentinel - done - log_action_end_msg 0 - - exit $ret - ;; - - stop) - PREFIX="Stopping MD array" - - if [ ! -f /proc/mdstat ]; then - log_problem "no MD subsystem loaded" - exit 0 - fi - - # ugly hack because shell sucks - IFSOLD=${IFS:-} - IFS=' -' - set +e - for line in $($MDADM --stop --scan 2>&1); do - set -e - IFS=$IFSOLD - set -- $line - shift - case "$@" in - - 'Unknown keyword'*) - # warn only - if [ -x $(command -v logger >/dev/null) ]; then - logger -t mdadm -p syslog.warning -- "$*" - elif [ -w /dev/console ]; then - echo "mdadm: $*" > /dev/console - else - echo "mdadm: $*" >&2 - fi - ;; - - 'stopped '*) - log_dev 0 $2 stopped - ;; - - 'fail to stop array '*': Device or resource busy') - log_dev 1 ${5%:} busy - ;; - - *) :;; - esac - done || exit $? - - rm -f $STATEDIR/md*-uevent - ;; - - restart|force-reload) - ${0:-} stop - ${0:-} start - ;; - - reload) - PREFIX="Reloading MD array" - log_notice "never anything to do" - ;; - - status) - if [ ! -f /proc/mdstat ]; then - log_problem "no MD subsystem loaded" - exit 1 - else - cat /proc/mdstat - fi - ;; - - *) - echo "Usage: ${0:-} {start|stop|restart}" >&2 - exit 1;; - -esac - -exit 0 |