summaryrefslogtreecommitdiff
path: root/test
diff options
context:
space:
mode:
Diffstat (limited to 'test')
-rwxr-xr-xtest402
1 files changed, 402 insertions, 0 deletions
diff --git a/test b/test
new file mode 100755
index 00000000..8e61f01c
--- /dev/null
+++ b/test
@@ -0,0 +1,402 @@
+#!/bin/bash
+#
+# run test suite for mdadm
+user=`id -un`
+if [ " $user" != " root" ]
+then echo >&2 "test: testing can only be done as 'root'."
+ exit 1;
+fi
+
+prefix='[0-9][0-9]'
+
+dir=`pwd`
+mdadm=$dir/mdadm
+if [ \! -x $mdadm ]
+then
+ echo >&2 "test: $mdadm isn't usable."
+fi
+
+testdir="tests"
+logdir="$testdir/logs"
+logsave=0
+exitonerror=1
+
+echo "Testing on linux-$(uname -r) kernel"
+
+# Check whether to run multipath tests
+modprobe multipath 2> /dev/null
+if grep -s 'Personalities : .*multipath' > /dev/null /proc/mdstat ; then
+ MULTIPATH="yes"
+fi
+INTEGRITY=yes
+DEVTYPE=loop
+LVM_VOLGROUP=mdtest
+
+# make sure to test local mdmon, not system one
+export MDADM_NO_SYSTEMCTL=1
+
+# assume md0, md1, md2 exist in /dev
+md0=/dev/md0 md1=/dev/md1 md2=/dev/md2
+mdp0=/dev/md_d0
+mdp1=/dev/md_d1
+
+# We test mdadm on loop-back block devices.
+# dir for storing files should be settable by command line maybe
+targetdir=/var/tmp
+size=20000
+# super0, round down to multiple of 64 and substract 64
+mdsize0=19904
+# super00 is nested, subtract 128
+mdsize00=19840
+# super1.0 round down to multiple of 2, subtract 8
+mdsize1=19992
+mdsize1a=19988
+mdsize12=19988
+# super1.2 for linear: round to multiple of 2, subtract 4
+mdsize1_l=19996
+mdsize2_l=19996
+# subtract another 4 for bitmaps
+mdsize1b=19988
+mdsize11=19992
+mdsize11a=19456
+mdsize12=19988
+
+# ddf needs bigger devices as 32Meg is reserved!
+ddfsize=65536
+
+config=/tmp/mdadm.conf
+
+cleanup() {
+ udevadm settle
+ $mdadm -Ssq 2> /dev/null
+ case $DEVTYPE in
+ loop)
+ for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13
+ do
+ losetup -d /dev/loop$d ; # rm -f $targetdir/mdtest$d
+ rm -f /dev/disk/by-path/loop*
+ done
+ ;;
+ lvm)
+ for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13
+ do
+ eval "lvremove --quiet -f \$dev$d"
+ done
+ ;;
+ esac
+}
+
+ctrl_c() {
+ exitonerror=1
+}
+
+do_setup() {
+ trap cleanup 0 1 3 15
+ trap ctrl_c 2
+
+ devlist=
+ for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13
+ do
+ sz=$size
+ if [ $d -gt 7 ]; then sz=$ddfsize ; fi
+ case $DEVTYPE in
+ loop)
+ [ -f $targetdir/mdtest$d ] || dd if=/dev/zero of=$targetdir/mdtest$d count=$sz bs=1K > /dev/null 2>&1
+ [ -b /dev/loop$d ] || mknod /dev/loop$d b 7 $d
+ if [ $d -eq 7 ]
+ then
+ losetup /dev/loop$d $targetdir/mdtest6 # for multipath use
+ else
+ losetup /dev/loop$d $targetdir/mdtest$d
+ fi
+ eval dev$d=/dev/loop$d
+ eval file$d=$targetdir/mdtest$d
+ ;;
+ lvm)
+ unset MULTIPATH
+ eval dev$d=/dev/mapper/${LVM_VOLGROUP}-mdtest$d
+ if ! lvcreate --quiet -L ${sz}K -n mdtest$d $LVM_VOLGROUP; then
+ trap '' 0 # make sure lvremove is not called
+ eval echo error creating \$dev$d
+ exit 129
+ fi
+ ;;
+ ram)
+ unset MULTIPATH
+ eval dev$d=/dev/ram$d
+ ;;
+ esac
+ eval devlist=\"\$devlist \$dev$d\"
+ eval devlist$d=\"\$devlist\"
+ #" <-- add this quote to un-confuse vim syntax highlighting
+ done
+ path0=$dev6
+ path1=$dev7
+
+ ulimit -c unlimited
+ [ -f /proc/mdstat ] || modprobe md_mod
+ echo 2000 > /proc/sys/dev/raid/speed_limit_max
+ echo 0 > /sys/module/md_mod/parameters/start_ro
+}
+
+# mdadm always adds --quiet, and we want to see any unexpected messages
+mdadm() {
+ rm -f $targetdir/stderr
+ case $* in
+ *-S* ) udevadm settle;;
+ esac
+ case $* in
+ *-C* ) $mdadm 2> $targetdir/stderr --quiet "$@" --auto=yes;;
+ * ) $mdadm 2> $targetdir/stderr --quiet "$@"
+ esac
+ rv=$?
+ case $* in
+ *-S* ) udevadm settle;;
+ esac
+ cat >&2 $targetdir/stderr
+ return $rv
+}
+
+# check various things
+check() {
+ case $1 in
+ spares )
+ spares=`tr '] ' '\012\012' < /proc/mdstat | grep -c '(S)' || exit 0`
+ if [ $spares -ne $2 ]
+ then
+ echo >&2 "ERROR expected $2 spares, found $spares"; exit 1;
+ fi
+ ;;
+ raid* | linear )
+ grep -s "active $1 " /proc/mdstat > /dev/null || {
+ echo >&2 "ERROR active $1 not found" ; cat /proc/mdstat ; exit 1;}
+ ;;
+ algorithm )
+ grep -s " algorithm $2 " /proc/mdstat > /dev/null || {
+ echo >&2 "ERROR algorithm $2 not found"; cat /proc/mdstat; exit 1;}
+ ;;
+ resync | recovery | reshape)
+ sleep 0.5
+ grep -s $1 /proc/mdstat > /dev/null || {
+ echo >&2 ERROR no $1 happening; cat /proc/mdstat; exit 1; }
+ ;;
+
+ nosync )
+ sleep 0.5
+ if grep -s -E '(resync|recovery|reshape) *=' > /dev/null /proc/mdstat ; then
+ echo >&2 "ERROR resync or recovery is happening!"; cat /proc/mdstat ; exit 1;
+ fi
+ ;;
+
+ wait )
+ p=`cat /proc/sys/dev/raid/speed_limit_max`
+ echo 2000000 > /proc/sys/dev/raid/speed_limit_max
+ sleep 0.1
+ while grep -E '(resync|recovery|reshape|check|repair) *=' > /dev/null /proc/mdstat
+ do sleep 0.5;
+ done
+ echo $p > /proc/sys/dev/raid/speed_limit_max
+ ;;
+
+ state )
+ grep -s "blocks.*\[$2\]\$" /proc/mdstat > /dev/null || {
+ echo >&2 "ERROR state $2 not found!"; cat /proc/mdstat ; exit 1; }
+ sleep 0.5
+ ;;
+
+ bitmap )
+ grep -s bitmap > /dev/null /proc/mdstat || {
+ echo >&2 ERROR no bitmap ; cat /proc/mdstat ; exit 1; }
+ ;;
+ nobitmap )
+ if grep -s "bitmap" > /dev/null /proc/mdstat
+ then
+ echo >&2 ERROR bitmap present ; cat /proc/mdstat ; exit 1;
+ fi
+ ;;
+
+ * ) echo >&2 ERROR unknown check $1 ; exit 1;
+ esac
+}
+
+no_errors() {
+ if [ -s $targetdir/stderr ]
+ then echo Bad errors from mdadm: ; cat $targetdir/stderr; exit 2;
+ fi
+}
+# basic device test
+
+testdev() {
+ udevadm settle
+ dev=$1
+ cnt=$2
+ dvsize=$3
+ chunk=$4
+ if [ -z "$5" ]; then
+ mkfs -j $dev > /dev/null 2>&1 && fsck -fn $dev >&2
+ fi
+ dsize=$[dvsize/chunk]
+ dsize=$[dsize*chunk]
+ rasize=$[dsize*2*cnt]
+ # rasize is in sectors
+ if [ -n "$DEV_ROUND_K" ]; then
+ rasize=$[rasize/DEV_ROUND_K/2]
+ rasize=$[rasize*DEV_ROUND_K*2]
+ fi
+ if [ `/sbin/blockdev --getsize $dev` -eq 0 ]; then sleep 2 ; fi
+ _sz=`/sbin/blockdev --getsize $dev`
+ if [ $rasize -lt $_sz -o $[rasize*4/5] -gt $_sz ]
+ then
+ echo "ERROR: size is wrong for $dev: $cnt * $dvsize (chunk=$chunk) = $rasize, not $_sz"
+ exit 1
+ fi
+}
+
+fast_sync() {
+ echo 200000 > /proc/sys/dev/raid/speed_limit_max
+}
+
+rotest() {
+ dev=$1
+ fsck -fn $dev >&2
+}
+
+do_test() {
+ _script=$1
+ _basename=`basename $_script`
+ if [ -f "$_script" ]
+ then
+ rm -f $targetdir/stderr
+ # stop all arrays, just incase some script left an array active.
+ $mdadm -Ssq 2> /dev/null
+ mdadm --zero $devlist 2> /dev/null
+ mdadm --zero $devlist 2> /dev/null
+ # this might have been reset: restore the default.
+ echo 2000 > /proc/sys/dev/raid/speed_limit_max
+ # source script in a subshell, so it has access to our
+ # namespace, but cannot change it.
+ echo -ne "$_script... "
+ if ( set -ex ; . $_script ) &> $targetdir/log
+ then
+ echo "succeeded"
+ _fail=0
+ else
+ log=log
+ cat $targetdir/stderr >> $targetdir/log
+ if [ $exitonerror == 0 ]; then
+ log=log-`basename $_script`
+ mv $targetdir/log $targetdir/$log
+ fi
+ echo "FAILED - see $targetdir/$log for details"
+ _fail=1
+ fi
+ if [ "$savelogs" == "1" ]; then
+ cp $targetdir/log $logdir/$_basename.log
+ fi
+ if [ "$_fail" == "1" -a "$exitonerror" == "1" ]; then
+ exit 1
+ fi
+ fi
+}
+
+do_help() {
+ echo "Usage: $0 [options]"
+ echo " Options:"
+ echo " --tests=<test1,test2,..> Comma separated list of tests to run"
+ echo " --disable-multipath Disable any tests involving multipath"
+ echo " --disable-integrity Disable slow tests of RAID[56] consistency"
+ echo " --logdir=<directory> Directory to save logfiles in"
+ echo " --save-logs Save all logs in <logdir>"
+ echo " --keep-going Don't stop on error, ie. run all tests"
+ echo " --dev=[loop|lvm|ram] Use loop devices (default), LVM, or RAM disk"
+ echo " --volgroup=<name> LVM volume group for LVM test"
+ echo " setup Setup test environment and exit"
+ echo " cleanup Cleanup test environment"
+ echo " <prefix> Run tests with <prefix>"
+}
+
+parse_args() {
+ for i in $*
+ do
+ case $i in
+ [0-9]*)
+ prefix=$i
+ ;;
+ setup)
+ echo "mdadm test environment setup"
+ do_setup
+ trap 0; exit 0
+ ;;
+ cleanup)
+ cleanup
+ exit 0
+ ;;
+ --tests=*)
+ TESTLIST=`expr "x$i" : 'x[^=]*=\(.*\)' | sed -e 's/,/ /g'`
+ ;;
+ --logdir=*)
+ logdir=`expr "x$i" : 'x[^=]*=\(.*\)'`
+ ;;
+ --save-logs)
+ savelogs=1
+ if [ ! -d $logdir ] ; then
+ mkdir $logdir
+ if [ $? -ne 0 ] ; then
+ exit 1;
+ fi
+ fi
+ ;;
+ --keep-going | --no-error)
+ exitonerror=0
+ ;;
+ --disable-multipath)
+ unset MULTIPATH
+ ;;
+ --disable-integrity)
+ unset INTEGRITY
+ ;;
+ --dev=loop)
+ DEVTYPE=loop
+ ;;
+ --dev=lvm)
+ DEVTYPE=lvm
+ ;;
+ --dev=ram)
+ DEVTYPE=ram
+ ;;
+ --volgroup=*)
+ LVM_VOLGROUP=`expr "x$i" : 'x[^=]*=\(.*\)'`
+ ;;
+ --help)
+ do_help
+ exit 0;
+ ;;
+ -*)
+ echo " $0: Unknown argument: $i"
+ do_help
+ exit 0;
+ ;;
+ esac
+done
+}
+
+parse_args $@
+
+do_setup
+
+if [ "$savelogs" == "1" ]; then
+ echo "Saving logs to $logdir"
+fi
+
+if [ "x$TESTLIST" != "x" ]; then
+ for script in $TESTLIST
+ do
+ do_test $testdir/$script
+ done
+else
+ for script in $testdir/$prefix $testdir/$prefix*[^~]
+ do
+ do_test $script
+ done
+fi
+exit 0