From 489bea7ee8e1dbecfa517b8415568044ab57c73a Mon Sep 17 00:00:00 2001 From: Michael Tokarev Date: Sat, 20 Dec 2014 08:48:44 +0000 Subject: mdadm (3.3.2-5) unstable; urgency=medium * use-tempnode-not-devnode.patch: change udev rules file to use $tempnode which works both on wheezy and jessie udev, instead of $devnode which only works in jessie. At this stage it is better to make rules file compatible with old version instead of adding versioned dependency. Should be removed for jessie+1. (Closes: #770883) * fix Closes: list in previous entry (Closes: #771852) # imported from the archive --- debian/NEWS | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 debian/NEWS (limited to 'debian/NEWS') diff --git a/debian/NEWS b/debian/NEWS new file mode 100644 index 00000000..691f7171 --- /dev/null +++ b/debian/NEWS @@ -0,0 +1,107 @@ +mdadm (3.2.2-1) unstable; urgency=low + + Metadata format change requires recent Grub + The following only applies to users who want to let the grub-pc bootloader + load the kernel directly off a RAID device created with mdadm 3.x and + default values, or when the metadata version is explicitly set using -e. + + Specifically, this includes all arrays created during or after the + installation of Debian squeeze (mdadm-3.1.4+8efb9d1). Arrays created with + older mdadm versions, and RAIDs created with the command-line option + -e 0.9 are not affected. + + Versions of grub-pc older than 1.98+20100720-1 will not be able to boot + directly off a RAID with the 1.x metadata formats (the new default is 1.2). + To ensure a bootable system, please make sure to use grub-pc 1.98+20100720-1 + or later, which is provided by Debian squeeze. An unbootable system may be + rescued with Super Grub2 Disk (http://www.supergrubdisk.org/super-grub2-disk/) + or grml (http://grml.org/). + + -- Scott Schaefer Wed, 27 Jul 2011 20:21:50 -0400 + +mdadm (3.1.4-1+8efb9d1) unstable; urgency=low + + Default metadata format for newly created arrays has changed from + 0.90 to 1.2. Location of the superblock is now 4Kb from the start + of the device, instead of at the end of the device for 0.90. + The change from 0.9 to 1.x lifted many restrictions of the old + metadata format, and change in location (from end to 4k after + start for 1.2) reduced chances to confuse a raid array with + filesystem inside it. It is now less easy to mount a component + device as separate filesystem by incident, thus destroying the + array. + + Also, chunk size by default is 512K (was 64K) and bitmap chunk size + is 64Mb. + + -- Michael Tokarev Sat, 10 Sep 2011 13:35:12 +0400 + +mdadm (2.6.7-2) unstable; urgency=low + + /dev/disk symlinks: + mdadm now creates symlinks in /dev/disk/by-id, using the template + md-uuid-* for the array UUIDs and md-name-* for any names assigned to + arrays (version-1 superblocks only). Thanks to Suse for the udev rules + file. + + mdrun removed: + This version also removes mdrun once and for all. If you are still using + mdrun, please ensure that you have a valid /etc/mdadm/mdadm.conf file (run + /usr/share/mdadm/mkconf --generate to get one), and run + + mdadm --assemble --scan --auto=yes + + -- martin f. krafft Wed, 02 Jul 2008 10:57:32 +0200 + +mdadm (2.5.3.git200608201206-1) unstable; urgency=low + + This version makes mdadm.conf mandatory. If you do not have such a file, it + will be created for you. + + You must verify the contents of this file and ensure that it represents your + local configuration. See /usr/share/doc/mdadm/README.upgrading-2.5.3.gz for + more information. + + -- martin f. krafft Sun, 20 Aug 2006 21:58:43 +0100 + +mdadm (2.5-1) unstable; urgency=low + + mdrun has been (finally) obsoleted, and an appropriate warning message is + written to the console if you (or a script) attempts to run it. If you + cannot live without mdrun, you can disable the warning by setting + USE_DEPRECATED_MDRUN=1 in /etc/default/mdadm. Note that mdrun will *not* be + supported. Please also see /usr/share/doc/mdadm/README.mdrun . + + -- martin f. krafft Tue, 30 May 2006 23:25:13 +0200 + +mdadm (2.4.1-5) unstable; urgency=low + + This version drops the automatic generation of the /etc/mdadm/mdadm.conf + file on every boot (if it was missing). This means that you need to ensure + that you have a valid configuration file. If none is present during package + configuration, mdadm *will* try to generate one, but it will only contain + information about arrays that were running at the time of package + configuration. Arrays not listed in the configuration file will *not* be + started automatically after boot (with the exception of the root partition). + + If you want to recreate your configuration file, either figure out what it + should contain from the mdadm.conf(5) manpage, or simply assemble and run + all the arrays the way you like it, then run + /usr/share/mdadm/mkconf force-generate /etc/mdadm/mdadm.conf + + -- martin f. krafft Sat, 03 Jun 2006 17:45:47 +0200 + +mdadm (2.4.1-1) unstable; urgency=low + + As of version 2.3, mdadm uses /etc/mdadm.conf as its main configuration + file, and falls back to /etc/mdadm/mdadm.conf if the former is not found. + Since Debian uses /etc/mdadm/mdadm.conf as the configuration file path, this + order was reverted: Debian's mdadm reads /etc/mdadm/mdadm.conf as its main + file and falls back to /etc/mdadm.conf if the former is not found. + + An incompatible change in the reshaping of RAID 5 arrays was made in this + upstream release. If you want to reshape a RAID 5 array with a version-1 + superblock, please make sure to use mdadm 2.4.1 and at least a 2.6.17-rc2 + kernel. + + -- martin f. krafft Tue, 16 May 2006 13:07:49 -0500 -- cgit v1.2.3