# translation of mdadm_2.5.2-2.po to Dutch
# translation of mdadm_nl.po to Dutch
#
#    Translators, if you are not familiar with the PO format, gettext
#    documentation is worth reading, especially sections dedicated to
#    this format, e.g. by running:
#         info -n '(gettext)PO Files'
#         info -n '(gettext)Header Entry'
#    Some information specific to po-debconf are available at
#            /usr/share/doc/po-debconf/README-trans
#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
#    Developers do not need to manually edit POT or PO files.
# Frans Pop <aragorn@tiscali.nl>, 2005, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: mdadm_2.5.2-2\n"
"Report-Msgid-Bugs-To: pkg-mdadm-devel@lists.alioth.debian.org\n"
"POT-Creation-Date: 2006-09-13 10:30+0200\n"
"PO-Revision-Date: 2006-07-05 17:30+0200\n"
"Last-Translator: Frans Pop <aragorn@tiscali.nl>\n"
"Language-Team: Dutch <debian-l10n-dutch@lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.9.1\n"

#. Type: string
#. Description
#: ../mdadm.templates:1001
#, fuzzy
msgid "MD arrays needed for the root filesystem:"
msgstr "Voor het basisbestandssysteem benodigde RAID-reeksen:"

#. Type: string
#. Description
#: ../mdadm.templates:1001
msgid "${msg}"
msgstr ""

#. Type: string
#. Description
#: ../mdadm.templates:1001
#, fuzzy
msgid ""
"Please enter a space-separated list of devices, 'all', or 'none'. You may "
"omit the leading '/dev/' and just enter e.g. \"md0 md1\", or \"md/1 md/d0\"."
msgstr ""
"Geef de apparaatbestanden (gescheiden met spaties) of 'all' in. U kunt "
"volstaan met het ingeven van bijvoorbeeld \"md0 md1\" (en dus '/dev/...' "
"weglaten)."

#. Type: text
#. Description
#: ../mdadm.templates:2001
msgid "for internal use - only the long description is needed."
msgstr ""

#. Type: text
#. Description
#: ../mdadm.templates:2001
#, fuzzy
msgid ""
"If your system has its root filesystem on an MD array (RAID), it needs to be "
"started early during the boot sequence. If your root filesystem is on a "
"logical volume (LVM), which is on MD, all constituent arrays need to be "
"started."
msgstr ""
"Als het basisbestandssysteem van uw systeem zich op een RAID-volume bevindt, "
"dient dit vroeg in de opstartcyclus geactiveerd te worden. Als uw "
"basisbestandssysteem zich op een logisch volume (LVM) op RAID bevindt, "
"dienen alle betrokken reeksen geactiveerd te worden."

#. Type: text
#. Description
#: ../mdadm.templates:2001
#, fuzzy
msgid ""
"If you know exactly which arrays are needed to bring up the root filesystem, "
"and you want to postpone starting all other arrays to a later point in the "
"boot sequence, enter the arrays to start here. Alternatively, enter 'all' to "
"simply start all available arrays."
msgstr ""
"Als u exact weet welke reeksen nodig zijn om het basisbestandssysteem te "
"activeren, geef deze dan hier in. Als alternatief kunt u 'all' opgeven wat "
"als resultaat heeft dat alle reeksen geactiveerd zullen worden. Als u geen "
"reeksen hoeft of wenst te activeren voor het basisbestandssysteem, laat dan "
"het antwoord leeg (of geef 'none' in)."

#. Type: text
#. Description
#: ../mdadm.templates:2001
msgid ""
"If you do not need or want to start any arrays for the root filesystem, "
"leave the answer blank (or enter 'none'). This may be the case if you are "
"using kernel autostart or do not need any arrays to boot."
msgstr ""

#. Type: text
#. Description
#: ../mdadm.templates:3001
msgid "An error occurred: device node does not exist"
msgstr ""

#. Type: text
#. Description
#: ../mdadm.templates:4001
msgid "An error occurred: not a block device"
msgstr ""

#. Type: text
#. Description
#: ../mdadm.templates:5001
msgid "An error occurred: not an MD array"
msgstr ""

#. Type: text
#. Description
#: ../mdadm.templates:6001
msgid "An error occurred: array not listed in mdadm.conf file"
msgstr ""

#. Type: boolean
#. Description
#: ../mdadm.templates:7001
msgid "Proceed with starting arrays not listed in mdadm.conf?"
msgstr ""

#. Type: boolean
#. Description
#: ../mdadm.templates:7001
msgid ""
"The array you have specified (${array}) is not listed in the configuration "
"file ${config}. Therefore it cannot be started during boot, unless you "
"correct the configuration file and recreate the initial ramdisk."
msgstr ""

#. Type: boolean
#. Description
#: ../mdadm.templates:7001
msgid ""
"Please refer to /usr/share/doc/mdadm/README.upgrading-2.5.3.gz if you intend "
"to continue."
msgstr ""

#. Type: boolean
#. Description
#: ../mdadm.templates:7001
msgid ""
"This warning is only relevant if you need arrays to be started from the "
"initial ramdisk to be able to boot. If you use kernel autostarting, or do "
"not need any arrays to be started as early as the initial ramdisk is loaded, "
"you can simply continue. Alternatively, choose not to continue and enter "
"'none' when prompted which arrays to start from the initial ramdisk."
msgstr ""

#. Type: boolean
#. Description
#: ../mdadm.templates:8001
#, fuzzy
msgid "Do you want to start MD arrays automatically?"
msgstr "RAID-apparaten automatisch starten?"

#. Type: boolean
#. Description
#: ../mdadm.templates:8001
#, fuzzy
msgid ""
"Once the base system has come up, mdadm can start all MD arrays (RAIDs) "
"specified in /etc/mdadm/mdadm.conf, which have not yet been started. Unless "
"you have compiled multi-device (MD) support into the kernel and marked all "
"partitions part of MD arrays with type 0xfd (as those and only those will be "
"started automatically by the kernel), this is probably what you want."
msgstr ""
"Nadat het basissysteem eenmaal is opgestart, kan mdadm zorg dragen voor het "
"activeren van alle RAID-apparaten die nog niet zijn gestart. "
"Normaalgesproken zal u deze optie willen selecteren, eventueel tenzij uw "
"kernel is gecompileerd met niet-modulaire RAID-ondersteuning (in dat geval "
"worden alle RAID-reeksen sowieso automatisch gestart)."

#. Type: boolean
#. Description
#: ../mdadm.templates:9001
msgid "Should mdadm run monthly redundancy checks of the MD arrays?"
msgstr ""

#. Type: boolean
#. Description
#: ../mdadm.templates:9001
msgid ""
"If your kernel supports it (>> 2.6.14), mdadm can periodically check the "
"redundancy of your MD arrays (RAIDs). This may be a resource-intensive "
"process, depending on your setup, but it could help prevent rare cases of "
"data loss. Note that this is a read-only check unless errors are found; if "
"errors are found, mdadm will try to correct them, which may result in write "
"access to the media."
msgstr ""

#. Type: boolean
#. Description
#: ../mdadm.templates:9001
msgid ""
"The default, if turned on, is to run the checks on the first Sunday of every "
"month at 01:06 o'clock."
msgstr ""

#. Type: boolean
#. Description
#: ../mdadm.templates:10001
#, fuzzy
msgid "Do you want to start the MD monitoring daemon?"
msgstr "Wilt u de achtergronddienst voor de RAID-monitor starten?"

#. Type: boolean
#. Description
#: ../mdadm.templates:10001
#, fuzzy
msgid ""
"The MD (RAID) monitor daemon sends email notifications in response to "
"important MD events (such as a disk failure). You probably want to enable it."
msgstr ""
"De achtergronddienst voor de RAID-monitor stuurt per mail berichten bij "
"belangrijke gebeurtenissen die betrekking hebben op RAID (zoals een falende "
"harde schijf). Aangeraden wordt deze in te schakelen."

#. Type: string
#. Description
#: ../mdadm.templates:11001
msgid "Recipient for email notifications:"
msgstr "Adres voor mailberichten:"

#. Type: string
#. Description
#: ../mdadm.templates:11001
#, fuzzy
msgid ""
"Please enter the email address of the user who should get the email "
"notification for important MD events."
msgstr ""
"Geef het mailadres in van de gebruiker die een mailbericht dient te "
"ontvangen voor belangrijke gebeurtenissen met betrekking tot RAID."

#~ msgid "Initialise the superblock if you reuse hard disks"
#~ msgstr "Superblok initialiseren als u harde schijven hergebruikt?"

#~ msgid ""
#~ "WARNING! If you are using hard disks which have RAID superblocks from "
#~ "earlier installations in different RAID arrays, you MUST zero each "
#~ "superblock *before* activating the autostart feature."
#~ msgstr ""
#~ "Waarschuwing! Als u harde schijven gebruikt die een RAID-superblok "
#~ "bevatten van een eerdere installatie in een andere RAID-reeks, dan MOET u "
#~ "het superblok overschrijven met nullen vóórdat u de \"autostart\"-optie "
#~ "activeert."

#~ msgid ""
#~ "To do this, do not start the RAID devices automatically. First, zero the "
#~ "superblock (mdadm --zero-superblock /dev/mdX). Next, use `dpkg-"
#~ "reconfigure mdadm` to reactivate the autostart feature."
#~ msgstr ""
#~ "U kunt dit doen door RAID-apparaten nu niet automatisch te laten starten. "
#~ "Overschrijf eerst het superblok met nullen ('mdadm --zero-superblock /dev/"
#~ "mdX'). Gebruik daarna 'dpkg-reconfigure mdadm' om de \"autostart\"-optie "
#~ "te activeren."

#~ msgid ""
#~ "You have the option to start all other arrays (those not needed for the "
#~ "root filesystem) later in the boot sequence. Doing so will give you "
#~ "greater control over the arrays with the mdadm configuration file. "
#~ "Starting all arrays at boot-time may be safer though."
#~ msgstr ""
#~ "U heeft de optie om alle andere reeksen (die niet benodigd zijn voor het "
#~ "basisbestandssysteem) later in de opstartcyclus te activeren. Dit geeft u "
#~ "meer controle over de reeksen met het mdadm configuratiebestand. Het is "
#~ "echter mogelijk veiliger om alle reeksen tijdens het opstarten van het "
#~ "systeem te activeren."