/* This file is a huge cut, paste and hack from linux/drivers/scsi/constant.c * which I guess was written by: * Copyright (C) 1993, 1994, 1995 Eric Youngdale * The rest of this is: * Copyright (C) 1999 - 2001 D. Gilbert * Copyright 2007-2008 by Robert Nelson * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * ASCII values for a number of symbolic constants, printing functions, etc. * * Some of the tables have been updated for SCSI 2. * * Version 0.84 (20010115) * Change output from stdout to stderr */ #define OUTP stderr static const unsigned char scsi_command_size[8] = { 6, 10, 10, 12, 12, 12, 10, 10 }; #define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7] static const char unknown[] = "UNKNOWN"; static const char * group_0_commands[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense", /* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks", /* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown, /* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry", /* 13-16 */ "Verify", "Recover Buffered Data", "Mode Select", "Reserve", /* 17-1b */ "Release", "Copy", "Erase", "Mode Sense", "Start/Stop Unit", /* 1c-1d */ "Receive Diagnostic", "Send Diagnostic", /* 1e-1f */ "Prevent/Allow Medium Removal", unknown, }; static const char *group_1_commands[] = { /* 20-22 */ unknown, unknown, unknown, /* 23-28 */ unknown, "Define window parameters", "Read Capacity", unknown, unknown, "Read (10)", /* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase", "Read updated block", /* 2e-31 */ "Write Verify","Verify", "Search High", "Search Equal", /* 32-34 */ "Search Low", "Set Limits", "Prefetch or Read Position", /* 35-37 */ "Synchronize Cache","Lock/Unlock Cache", "Read Defect Data", /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", "Read Buffer", /* 3d-3f */ "Update Block", "Read Long", "Write Long", }; static const char *group_2_commands[] = { /* 40-41 */ "Change Definition", "Write Same", /* 42-48 */ "Read sub-channel", "Read TOC", "Read header", "Play audio (10)", unknown, "Play audio msf", "Play audio track/index", /* 49-4f */ "Play track relative (10)", unknown, "Pause/resume", "Log Select", "Log Sense", unknown, unknown, /* 50-55 */ unknown, unknown, unknown, unknown, unknown, "Mode Select (10)", /* 56-5b */ unknown, unknown, unknown, unknown, "Mode Sense (10)", unknown, /* 5c-5f */ unknown, unknown, unknown, }; /* The following are 12 byte commands in group 5 */ static const char *group_5_commands[] = { /* a0-a5 */ unknown, unknown, unknown, unknown, unknown, "Move medium/play audio(12)", /* a6-a9 */ "Exchange medium", unknown, "Read(12)", "Play track relative(12)", /* aa-ae */ "Write(12)", unknown, "Erase(12)", unknown, "Write and verify(12)", /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)", /* b2-b4 */ "Search data low(12)", "Set limits(12)", unknown, /* b5-b6 */ "Request volume element address", "Send volume tag", /* b7-b9 */ "Read defect data(12)", "Read element status", unknown, /* ba-bf */ unknown, unknown, unknown, unknown, unknown, unknown, }; #define group(opcode) (((opcode) >> 5) & 7) #define RESERVED_GROUP 0 #define VENDOR_GROUP 1 static const char **commands[] = { group_0_commands, group_1_commands, group_2_commands, (const char **) RESERVED_GROUP, (const char **) RESERVED_GROUP, group_5_commands, (const char **) VENDOR_GROUP, (const char **) VENDOR_GROUP }; static const char reserved[] = "RESERVED"; static const char vendor[] = "VENDOR SPECIFIC"; static void print_opcode(int opcode) { const char **table = commands[ group(opcode) ]; switch ((unsigned long) table) { case RESERVED_GROUP: fprintf(OUTP, "%s(0x%02x) ", reserved, opcode); break; case VENDOR_GROUP: fprintf(OUTP, "%s(0x%02x) ", vendor, opcode); break; default: if (table[opcode & 0x1f] != unknown) fprintf(OUTP, "%s ",table[opcode & 0x1f]); else fprintf(OUTP, "%s(0x%02x) ", unknown, opcode); break; } } void sg_print_command (const unsigned char * command) { int i,s; print_opcode(command[0]); for ( i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) fprintf(OUTP, "%02x ", command[i]); fprintf(OUTP, "\n"); } static const char * statuses[] = { /* 0-4 */ "Good", "Check Condition", "Condition Met", unknown, "Busy", /* 5-9 */ unknown, unknown, unknown, "Intermediate", unknown, /* a-c */ "Intermediate-Condition Met", unknown, "Reservation Conflict", /* d-10 */ unknown, unknown, unknown, unknown, /* 11-14 */ "Command Terminated", unknown, unknown, "Queue Full", /* 15-1a */ unknown, unknown, unknown, unknown, unknown, unknown, /* 1b-1f */ unknown, unknown, unknown, unknown, unknown, }; void sg_print_status (int masked_status) { /* status = (status >> 1) & 0xf; */ /* already done */ fprintf(OUTP, "%s ",statuses[masked_status]); } #define D 0x001 /* DIRECT ACCESS DEVICE (disk) */ #define T 0x002 /* SEQUENTIAL ACCESS DEVICE (tape) */ #define L 0x004 /* PRINTER DEVICE */ #define P 0x008 /* PROCESSOR DEVICE */ #define W 0x010 /* WRITE ONCE READ MULTIPLE DEVICE */ #define R 0x020 /* READ ONLY (CD-ROM) DEVICE */ #define S 0x040 /* SCANNER DEVICE */ #define O 0x080 /* OPTICAL MEMORY DEVICE */ #define M 0x100 /* MEDIA CHANGER DEVICE */ #define C 0x200 /* COMMUNICATION DEVICE */ struct error_info{ unsigned char code1, code2; unsigned short int devices; const char * text; }; struct error_info2{ unsigned char code1, code2_min, code2_max; unsigned short int devices; const char * text; }; static struct error_info2 additional2[] = { {0x40,0x00,0x7f,D,"Ram failure (%x)"}, {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"}, {0x41,0x00,0xff,D,"Data path failure (%x)"}, {0x42,0x00,0xff,D,"Power-on or self-test failure (%x)"}, {0, 0, 0, 0, NULL} }; static struct error_info additional[] = { {0x00,0x01,T,"Filemark detected"}, {0x00,0x02,T|S,"End-of-partition/medium detected"}, {0x00,0x03,T,"Setmark detected"}, {0x00,0x04,T|S,"Beginning-of-partition/medium detected"}, {0x00,0x05,T|S,"End-of-data detected"}, {0x00,0x06,D|T|L|P|W|R|S|O|M|C,"I/O process terminated"}, {0x00,0x11,R,"Audio play operation in progress"}, {0x00,0x12,R,"Audio play operation paused"}, {0x00,0x13,R,"Audio play operation successfully completed"}, {0x00,0x14,R,"Audio play operation stopped due to error"}, {0x00,0x15,R,"No current audio status to return"}, {0x01,0x00,D|W|O,"No index/sector signal"}, {0x02,0x00,D|W|R|O|M,"No seek complete"}, {0x03,0x00,D|T|L|W|S|O,"Peripheral device write fault"}, {0x03,0x01,T,"No write current"}, {0x03,0x02,T,"Excessive write errors"}, {0x04,0x00,D|T|L|P|W|R|S|O|M|C, "Logical unit not ready, cause not reportable"}, {0x04,0x01,D|T|L|P|W|R|S|O|M|C, "Logical unit is in process of becoming ready"}, {0x04,0x02,D|T|L|P|W|R|S|O|M|C, "Logical unit not ready, initializing command required"}, {0x04,0x03,D|T|L|P|W|R|S|O|M|C, "Logical unit not ready, manual intervention required"}, {0x04,0x04,D|T|L|O,"Logical unit not ready, format in progress"}, {0x05,0x00,D|T|L|W|R|S|O|M|C,"Logical unit does not respond to selection"}, {0x06,0x00,D|W|R|O|M,"No reference position found"}, {0x07,0x00,D|T|L|W|R|S|O|M,"Multiple peripheral devices selected"}, {0x08,0x00,D|T|L|W|R|S|O|M|C,"Logical unit communication failure"}, {0x08,0x01,D|T|L|W|R|S|O|M|C,"Logical unit communication time-out"}, {0x08,0x02,D|T|L|W|R|S|O|M|C,"Logical unit communication parity error"}, {0x09,0x00,D|T|W|R|O,"Track following error"}, {0x09,0x01,W|R|O,"Tracking servo failure"}, {0x09,0x02,W|R|O,"Focus servo failure"}, {0x09,0x03,W|R|O,"Spindle servo failure"}, {0x0A,0x00,D|T|L|P|W|R|S|O|M|C,"Error log overflow"}, {0x0C,0x00,T|S,"Write error"}, {0x0C,0x01,D|W|O,"Write error recovered with auto reallocation"}, {0x0C,0x02,D|W|O,"Write error - auto reallocation failed"}, {0x10,0x00,D|W|O,"Id crc or ecc error"}, {0x11,0x00,D|T|W|R|S|O,"Unrecovered read error"}, {0x11,0x01,D|T|W|S|O,"Read retries exhausted"}, {0x11,0x02,D|T|W|S|O,"Error too long to correct"}, {0x11,0x03,D|T|W|S|O,"Multiple read errors"}, {0x11,0x04,D|W|O,"Unrecovered read error - auto reallocate failed"}, {0x11,0x05,W|R|O,"L-ec uncorrectable error"}, {0x11,0x06,W|R|O,"Circ unrecovered error"}, {0x11,0x07,W|O,"Data resynchronization error"}, {0x11,0x08,T,"Incomplete block read"}, {0x11,0x09,T,"No gap found"}, {0x11,0x0A,D|T|O,"Miscorrected error"}, {0x11,0x0B,D|W|O,"Unrecovered read error - recommend reassignment"}, {0x11,0x0C,D|W|O,"Unrecovered read error - recommend rewrite the data"}, {0x12,0x00,D|W|O,"Address mark not found for id field"}, {0x13,0x00,D|W|O,"Address mark not found for data field"}, {0x14,0x00,D|T|L|W|R|S|O,"Recorded entity not found"}, {0x14,0x01,D|T|W|R|O,"Record not found"}, {0x14,0x02,T,"Filemark or setmark not found"}, {0x14,0x03,T,"End-of-data not found"}, {0x14,0x04,T,"Block sequence error"}, {0x15,0x00,D|T|L|W|R|S|O|M,"Random positioning error"}, {0x15,0x01,D|T|L|W|R|S|O|M,"Mechanical positioning error"}, {0x15,0x02,D|T|W|R|O,"Positioning error detected by read of medium"}, {0x16,0x00,D|W|O,"Data synchronization mark error"}, {0x17,0x00,D|T|W|R|S|O,"Recovered data with no error correction applied"}, {0x17,0x01,D|T|W|R|S|O,"Recovered data with retries"}, {0x17,0x02,D|T|W|R|O,"Recovered data with positive head offset"}, {0x17,0x03,D|T|W|R|O,"Recovered data with negative head offset"}, {0x17,0x04,W|R|O,"Recovered data with retries and/or circ applied"}, {0x17,0x05,D|W|R|O,"Recovered data using previous sector id"}, {0x17,0x06,D|W|O,"Recovered data without ecc - data auto-reallocated"}, {0x17,0x07,D|W|O,"Recovered data without ecc - recommend reassignment"}, {0x18,0x00,D|T|W|R|O,"Recovered data with error correction applied"}, {0x18,0x01,D|W|R|O,"Recovered data with error correction and retries applied"}, {0x18,0x02,D|W|R|O,"Recovered data - data auto-reallocated"}, {0x18,0x03,R,"Recovered data with circ"}, {0x18,0x04,R,"Recovered data with lec"}, {0x18,0x05,D|W|R|O,"Recovered data - recommend reassignment"}, {0x19,0x00,D|O,"Defect list error"}, {0x19,0x01,D|O,"Defect list not available"}, {0x19,0x02,D|O,"Defect list error in primary list"}, {0x19,0x03,D|O,"Defect list error in grown list"}, {0x1A,0x00,D|T|L|P|W|R|S|O|M|C,"Parameter list length error"}, {0x1B,0x00,D|T|L|P|W|R|S|O|M|C,"Synchronous data transfer error"}, {0x1C,0x00,D|O,"Defect list not found"}, {0x1C,0x01,D|O,"Primary defect list not found"}, {0x1C,0x02,D|O,"Grown defect list not found"}, {0x1D,0x00,D|W|O,"Miscompare during verify operation"}, {0x1E,0x00,D|W|O,"Recovered id with ecc correction"}, {0x20,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid command operation code"}, {0x21,0x00,D|T|W|R|O|M,"Logical block address out of range"}, {0x21,0x01,M,"Invalid element address"}, {0x22,0x00,D,"Illegal function (should use 20 00, 24 00, or 26 00)"}, {0x24,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in cdb"}, {0x25,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit not supported"}, {0x26,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in parameter list"}, {0x26,0x01,D|T|L|P|W|R|S|O|M|C,"Parameter not supported"}, {0x26,0x02,D|T|L|P|W|R|S|O|M|C,"Parameter value invalid"}, {0x26,0x03,D|T|L|P|W|R|S|O|M|C,"Threshold parameters not supported"}, {0x27,0x00,D|T|W|O,"Write protected"}, {0x28,0x00,D|T|L|P|W|R|S|O|M|C,"Not ready to ready transition (medium may have changed)"}, {0x28,0x01,M,"Import or export element accessed"}, {0x29,0x00,D|T|L|P|W|R|S|O|M|C,"Power on, reset, or bus device reset occurred"}, {0x2A,0x00,D|T|L|W|R|S|O|M|C,"Parameters changed"}, {0x2A,0x01,D|T|L|W|R|S|O|M|C,"Mode parameters changed"}, {0x2A,0x02,D|T|L|W|R|S|O|M|C,"Log parameters changed"}, {0x2B,0x00,D|T|L|P|W|R|S|O|C,"Copy cannot execute since host cannot disconnect"}, {0x2C,0x00,D|T|L|P|W|R|S|O|M|C,"Command sequence error"}, {0x2C,0x01,S,"Too many windows specified"}, {0x2C,0x02,S,"Invalid combination of windows specified"}, {0x2D,0x00,T,"Overwrite error on update in place"}, {0x2F,0x00,D|T|L|P|W|R|S|O|M|C,"Commands cleared by another initiator"}, {0x30,0x00,D|T|W|R|O|M,"Incompatible medium installed"}, {0x30,0x01,D|T|W|R|O,"Cannot read medium - unknown format"}, {0x30,0x02,D|T|W|R|O,"Cannot read medium - incompatible format"}, {0x30,0x03,D|T,"Cleaning cartridge installed"}, {0x31,0x00,D|T|W|O,"Medium format corrupted"}, {0x31,0x01,D|L|O,"Format command failed"}, {0x32,0x00,D|W|O,"No defect spare location available"}, {0x32,0x01,D|W|O,"Defect list update failure"}, {0x33,0x00,T,"Tape length error"}, {0x36,0x00,L,"Ribbon, ink, or toner failure"}, {0x37,0x00,D|T|L|W|R|S|O|M|C,"Rounded parameter"}, {0x39,0x00,D|T|L|W|R|S|O|M|C,"Saving parameters not supported"}, {0x3A,0x00,D|T|L|W|R|S|O|M,"Medium not present"}, {0x3B,0x00,T|L,"Sequential positioning error"}, {0x3B,0x01,T,"Tape position error at beginning-of-medium"}, {0x3B,0x02,T,"Tape position error at end-of-medium"}, {0x3B,0x03,L,"Tape or electronic vertical forms unit not ready"}, {0x3B,0x04,L,"Slew failure"}, {0x3B,0x05,L,"Paper jam"}, {0x3B,0x06,L,"Failed to sense top-of-form"}, {0x3B,0x07,L,"Failed to sense bottom-of-form"}, {0x3B,0x08,T,"Reposition error"}, {0x3B,0x09,S,"Read past end of medium"}, {0x3B,0x0A,S,"Read past beginning of medium"}, {0x3B,0x0B,S,"Position past end of medium"}, {0x3B,0x0C,S,"Position past beginning of medium"}, {0x3B,0x0D,M,"Medium destination element full"}, {0x3B,0x0E,M,"Medium source element empty"}, {0x3D,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid bits in identify message"}, {0x3E,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit has not self-configured yet"}, {0x3F,0x00,D|T|L|P|W|R|S|O|M|C,"Target operating conditions have changed"}, {0x3F,0x01,D|T|L|P|W|R|S|O|M|C,"Microcode has been changed"}, {0x3F,0x02,D|T|L|P|W|R|S|O|M|C,"Changed operating definition"}, {0x3F,0x03,D|T|L|P|W|R|S|O|M|C,"Inquiry data has changed"}, {0x43,0x00,D|T|L|P|W|R|S|O|M|C,"Message error"}, {0x44,0x00,D|T|L|P|W|R|S|O|M|C,"Internal target failure"}, {0x45,0x00,D|T|L|P|W|R|S|O|M|C,"Select or reselect failure"}, {0x46,0x00,D|T|L|P|W|R|S|O|M|C,"Unsuccessful soft reset"}, {0x47,0x00,D|T|L|P|W|R|S|O|M|C,"Scsi parity error"}, {0x48,0x00,D|T|L|P|W|R|S|O|M|C,"Initiator detected error message received"}, {0x49,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid message error"}, {0x4A,0x00,D|T|L|P|W|R|S|O|M|C,"Command phase error"}, {0x4B,0x00,D|T|L|P|W|R|S|O|M|C,"Data phase error"}, {0x4C,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit failed self-configuration"}, {0x4E,0x00,D|T|L|P|W|R|S|O|M|C,"Overlapped commands attempted"}, {0x50,0x00,T,"Write append error"}, {0x50,0x01,T,"Write append position error"}, {0x50,0x02,T,"Position error related to timing"}, {0x51,0x00,T|O,"Erase failure"}, {0x52,0x00,T,"Cartridge fault"}, {0x53,0x00,D|T|L|W|R|S|O|M,"Media load or eject failed"}, {0x53,0x01,T,"Unload tape failure"}, {0x53,0x02,D|T|W|R|O|M,"Medium removal prevented"}, {0x54,0x00,P,"Scsi to host system interface failure"}, {0x55,0x00,P,"System resource failure"}, {0x57,0x00,R,"Unable to recover table-of-contents"}, {0x58,0x00,O,"Generation does not exist"}, {0x59,0x00,O,"Updated block read"}, {0x5A,0x00,D|T|L|P|W|R|S|O|M,"Operator request or state change input (unspecified)"}, {0x5A,0x01,D|T|W|R|O|M,"Operator medium removal request"}, {0x5A,0x02,D|T|W|O,"Operator selected write protect"}, {0x5A,0x03,D|T|W|O,"Operator selected write permit"}, {0x5B,0x00,D|T|L|P|W|R|S|O|M,"Log exception"}, {0x5B,0x01,D|T|L|P|W|R|S|O|M,"Threshold condition met"}, {0x5B,0x02,D|T|L|P|W|R|S|O|M,"Log counter at maximum"}, {0x5B,0x03,D|T|L|P|W|R|S|O|M,"Log list codes exhausted"}, {0x5C,0x00,D|O,"Rpl status change"}, {0x5C,0x01,D|O,"Spindles synchronized"}, {0x5C,0x02,D|O,"Spindles not synchronized"}, {0x60,0x00,S,"Lamp failure"}, {0x61,0x00,S,"Video acquisition error"}, {0x61,0x01,S,"Unable to acquire video"}, {0x61,0x02,S,"Out of focus"}, {0x62,0x00,S,"Scan head positioning error"}, {0x63,0x00,R,"End of user area encountered on this track"}, {0x64,0x00,R,"Illegal mode for this track"}, {0, 0, 0, NULL} }; static const char *snstext[] = { "None", /* There is no sense information */ "Recovered Error", /* The last command completed successfully but used error correction */ "Not Ready", /* The addressed target is not ready */ "Medium Error", /* Data error detected on the medium */ "Hardware Error", /* Controller or device failure */ "Illegal Request", "Unit Attention", /* Removable medium was changed, or the target has been reset */ "Data Protect", /* Access to the data is blocked */ "Blank Check", /* Reached unexpected written or unwritten region of the medium */ "Key=9", /* Vendor specific */ "Copy Aborted", /* COPY or COMPARE was aborted */ "Aborted Command", /* The target aborted the command */ "Equal", /* A SEARCH DATA command found data equal */ "Volume Overflow", /* Medium full with still data to be written */ "Miscompare", /* Source data and data on the medium do not agree */ "Key=15" /* Reserved */ }; /* Print sense information */ void sg_print_sense(const char * leadin, const unsigned char * sense_buffer, int sb_len) { int i, s; int sense_class, valid, code; const char * error = NULL; sense_class = (sense_buffer[0] >> 4) & 0x07; code = sense_buffer[0] & 0xf; valid = sense_buffer[0] & 0x80; if (sense_class == 7) { /* extended sense data */ s = sense_buffer[7] + 8; if(s > sb_len) s = sb_len; if (!valid) fprintf(OUTP, "[valid=0] "); fprintf(OUTP, "Info fld=0x%x, ", (int)((sense_buffer[3] << 24) | (sense_buffer[4] << 16) | (sense_buffer[5] << 8) | sense_buffer[6])); if (sense_buffer[2] & 0x80) fprintf(OUTP, "FMK "); /* current command has read a filemark */ if (sense_buffer[2] & 0x40) fprintf(OUTP, "EOM "); /* end-of-medium condition exists */ if (sense_buffer[2] & 0x20) fprintf(OUTP, "ILI "); /* incorrect block length requested */ switch (code) { case 0x0: error = "Current"; /* error concerns current command */ break; case 0x1: error = "Deferred"; /* error concerns some earlier command */ /* e.g., an earlier write to disk cache succeeded, but now the disk discovers that it cannot write the data */ break; default: error = "Invalid"; } fprintf(OUTP, "%s ", error); if (leadin) fprintf(OUTP, "%s: ", leadin); fprintf(OUTP, "sense key: %s\n", snstext[sense_buffer[2] & 0x0f]); /* Check to see if additional sense information is available */ if(sense_buffer[7] + 7 < 13 || (sense_buffer[12] == 0 && sense_buffer[13] == 0)) goto done; for(i=0; additional[i].text; i++) if(additional[i].code1 == sense_buffer[12] && additional[i].code2 == sense_buffer[13]) fprintf(OUTP, "Additional sense indicates: %s\n", additional[i].text); for(i=0; additional2[i].text; i++) if(additional2[i].code1 == sense_buffer[12] && additional2[i].code2_min >= sense_buffer[13] && additional2[i].code2_max <= sense_buffer[13]) { fprintf(OUTP, "Additional sense indicates: "); fprintf(OUTP, additional2[i].text, sense_buffer[13]); fprintf(OUTP, "\n"); }; } else { /* non-extended sense data */ /* * Standard says: * sense_buffer[0] & 0200 : address valid * sense_buffer[0] & 0177 : vendor-specific error code * sense_buffer[1] & 0340 : vendor-specific * sense_buffer[1..3] : 21-bit logical block address */ if (leadin) fprintf(OUTP, "%s: ", leadin); if (sense_buffer[0] < 15) fprintf(OUTP, "old sense: key %s\n", snstext[sense_buffer[0] & 0x0f]); else fprintf(OUTP, "sns = %2x %2x\n", sense_buffer[0], sense_buffer[2]); fprintf(OUTP, "Non-extended sense class %d code 0x%0x ", sense_class, code); s = 4; } done: fprintf(OUTP, "Raw sense data (in hex):\n "); for (i = 0; i < s; ++i) { if ((i > 0) && (0 == (i % 24))) fprintf(OUTP, "\n "); fprintf(OUTP, "%02x ", sense_buffer[i]); } fprintf(OUTP, "\n"); return; } static const char * hostbyte_table[]={ "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", "DID_PASSTHROUGH", "DID_SOFT_ERROR", NULL}; void sg_print_host_status(int host_status) { static int maxcode=0; int i; if(! maxcode) { for(i = 0; hostbyte_table[i]; i++) ; maxcode = i-1; } fprintf(OUTP, "Host_status=0x%02x", host_status); if(host_status > maxcode) { fprintf(OUTP, "is invalid "); return; } fprintf(OUTP, "(%s) ",hostbyte_table[host_status]); } static const char * driverbyte_table[]={ "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR", "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE", NULL}; static const char * driversuggest_table[]={"SUGGEST_OK", "SUGGEST_RETRY", "SUGGEST_ABORT", "SUGGEST_REMAP", "SUGGEST_DIE", unknown,unknown,unknown, "SUGGEST_SENSE",NULL}; void sg_print_driver_status(int driver_status) { static int driver_max =0 , suggest_max=0; int i; int dr = driver_status & SG_ERR_DRIVER_MASK; int su = (driver_status & SG_ERR_SUGGEST_MASK) >> 4; if(! driver_max) { for(i = 0; driverbyte_table[i]; i++) ; driver_max = i; for(i = 0; driversuggest_table[i]; i++) ; suggest_max = i; } fprintf(OUTP, "Driver_status=0x%02x",driver_status); fprintf(OUTP, " (%s,%s) ", dr < driver_max ? driverbyte_table[dr]:"invalid", su < suggest_max ? driversuggest_table[su]:"invalid"); } #ifdef SG_IO int sg_chk_n_print3(const char * leadin, struct sg_io_hdr * hp) { return sg_chk_n_print(leadin, hp->masked_status, hp->host_status, hp->driver_status, hp->sbp, hp->sb_len_wr); } #endif int sg_chk_n_print(const char * leadin, int masked_status, int host_status, int driver_status, const unsigned char * sense_buffer, int sb_len) { int done_leadin = 0; int done_sense = 0; if ((0 == masked_status) && (0 == host_status) && (0 == driver_status)) return 1; /* No problems */ if (0 != masked_status) { if (leadin) fprintf(OUTP, "%s: ", leadin); done_leadin = 1; sg_print_status(masked_status); fprintf(OUTP, "\n"); if (sense_buffer && ((masked_status == CHECK_CONDITION) || (masked_status == COMMAND_TERMINATED))) { sg_print_sense(0, sense_buffer, sb_len); done_sense = 1; } } if (0 != host_status) { if (leadin && (! done_leadin)) fprintf(OUTP, "%s: ", leadin); if (done_leadin) fprintf(OUTP, "plus...: "); else done_leadin = 1; sg_print_host_status(host_status); fprintf(OUTP, "\n"); } if (0 != driver_status) { if (leadin && (! done_leadin)) fprintf(OUTP, "%s: ", leadin); if (done_leadin) fprintf(OUTP, "plus...: "); else done_leadin = 1; sg_print_driver_status(driver_status); fprintf(OUTP, "\n"); if (sense_buffer && (! done_sense) && (SG_ERR_DRIVER_SENSE & driver_status)) sg_print_sense(0, sense_buffer, sb_len); } return 0; } #ifdef SG_IO int sg_err_category3(struct sg_io_hdr * hp) { return sg_err_category(hp->masked_status, hp->host_status, hp->driver_status, hp->sbp, hp->sb_len_wr); } #endif int sg_err_category(int masked_status, int host_status, int driver_status, const unsigned char * sense_buffer, int sb_len) { if ((0 == masked_status) && (0 == host_status) && (0 == driver_status)) return SG_ERR_CAT_CLEAN; if ((CHECK_CONDITION == masked_status) || (COMMAND_TERMINATED == masked_status) || (SG_ERR_DRIVER_SENSE & driver_status)) { if (sense_buffer && (sb_len > 2)) { if(RECOVERED_ERROR == sense_buffer[2]) return SG_ERR_CAT_RECOVERED; else if ((UNIT_ATTENTION == (0x0f & sense_buffer[2])) && (sb_len > 12)) { if (0x28 == sense_buffer[12]) return SG_ERR_CAT_MEDIA_CHANGED; if (0x29 == sense_buffer[12]) return SG_ERR_CAT_RESET; } } return SG_ERR_CAT_SENSE; } if (0 != host_status) { if ((SG_ERR_DID_NO_CONNECT == host_status) || (SG_ERR_DID_BUS_BUSY == host_status) || (SG_ERR_DID_TIME_OUT == host_status)) return SG_ERR_CAT_TIMEOUT; } if (0 != driver_status) { if (SG_ERR_DRIVER_TIMEOUT == driver_status) return SG_ERR_CAT_TIMEOUT; } return SG_ERR_CAT_OTHER; } int sg_get_command_size(unsigned char opcode) { return COMMAND_SIZE(opcode); }