diff options
Diffstat (limited to 'openEMS/matlab/AddCPWPort.m')
-rw-r--r-- | openEMS/matlab/AddCPWPort.m | 285 |
1 files changed, 285 insertions, 0 deletions
diff --git a/openEMS/matlab/AddCPWPort.m b/openEMS/matlab/AddCPWPort.m new file mode 100644 index 0000000..ba4fc4a --- /dev/null +++ b/openEMS/matlab/AddCPWPort.m @@ -0,0 +1,285 @@ +function [CSX,port] = AddCPWPort( CSX, prio, portnr, materialname, start, stop, gap_width, dir, evec, varargin ) +% [CSX,port] = AddCPWPort( CSX, prio, portnr, materialname, start, stop, gap_width, dir, evec, varargin ) +% +% CSX: CSX-object created by InitCSX() +% prio: priority for excitation and probe boxes +% portnr: (integer) number of the port +% materialname: property for the CPW (created by AddMetal()) +% start: 3D start rowvector for port definition +% stop: 3D end rowvector for port definition +% gap_width: width of the CPW gap (left and right) +% dir: direction of wave propagation (choices: 0, 1, 2 or 'x','y','z') +% evec: excitation vector, which defines the direction of the e-field (must be the same as used in AddExcitation()) +% +% variable input: +% varargin: optional additional excitations options, see also AddExcitation +% 'ExcitePort' true/false to make the port an active feeding port (default +% is false) +% 'FeedShift' shift to port from start by a given distance in drawing +% units. Default is 0. Only active if 'ExcitePort' is set! +% 'Feed_R' Specifiy a lumped port resistance. Default is no lumped +% port resistance --> port has to end in an ABC. +% 'MeasPlaneShift' Shift the measurement plane from start t a given distance +% in drawing units. Default is the middle of start/stop. +% 'PortNamePrefix' a prefix to the port name +% +% Important: The mesh has to be already set and defined by DefineRectGrid! +% +% example: +% CSX = AddMetal( CSX, 'metal' ); %create a PEC called 'metal' +% start = [0 -width/2 0]; +% stop = [length +width/2 0]; +% [CSX,port] = AddCPWPort( CSX, 0, 1, 'metal', start, stop, gap_width, 'x', ... +% [0 0 -1], 'ExcitePort', true, 'Feed_R', 50 ) +% Explanation: +% - this defines a stripline in x-direction (dir='x') +% --> the wave travels along the x-direction +% - with an e-field excitation in -z-direction (evec=[0 0 -1]) +% - the excitation is active and placed at x=start(1) ('ExcitePort', true) +% - a 50 Ohm lumped port resistance is placed at x=start(1) ('Feed_R', 50) +% - the width-direction is determined by the cross product of the +% direction of propagtion (dir='x') and the excitation vector +% (evec=[0 0 -1]), in this case it is the y-direction +% - the stripline-metal is created in a xy-plane at a height at z=start(3) +% --> The upper and lower reference plane (ground) must be defined by +% the user +% +% Thorsten Liebig <thorsten.liebig@gmx.de> (c) 2014 +% +% See also InitCSX DefineRectGrid AddMetal AddMaterial AddExcitation calcPort + +%% validate arguments %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%check mesh +if ~isfield(CSX,'RectilinearGrid') + error 'mesh needs to be defined! Use DefineRectGrid() first!'; +end +if (~isfield(CSX.RectilinearGrid,'XLines') || ~isfield(CSX.RectilinearGrid,'YLines') || ~isfield(CSX.RectilinearGrid,'ZLines')) + error 'mesh needs to be defined! Use DefineRectGrid() first!'; +end + +% check dir +dir = DirChar2Int(dir); + +% check evec +if ~(evec(1) == evec(2) == 0) && ~(evec(1) == evec(3) == 0) && ~(evec(2) == evec(3) == 0) || (sum(evec) == 0) + error 'evec must have exactly one component ~= 0' +end +evec0 = evec ./ sum(evec); % evec0 is a unit vector + +%set defaults +feed_shift = 0; +feed_R = inf; %(default is open, no resitance) +excite = false; +measplanepos = nan; +PortNamePrefix = ''; + +excite_args = {}; + +%% read optional arguments %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +for n=1:2:numel(varargin) + if (strcmp(varargin{n},'FeedShift')==1); + feed_shift = varargin{n+1}; + if (numel(feed_shift)>1) + error 'FeedShift must be a scalar value' + end + elseif (strcmp(varargin{n},'Feed_R')==1); + feed_R = varargin{n+1}; + if (numel(feed_shift)>1) + error 'Feed_R must be a scalar value' + end + elseif (strcmp(varargin{n},'MeasPlaneShift')==1); + measplanepos = varargin{n+1}; + if (numel(feed_shift)>1) + error 'MeasPlaneShift must be a scalar value' + end + elseif (strcmp(varargin{n},'ExcitePort')==1); + if ischar(varargin{n+1}) + warning('CSXCAD:AddCPWPort','depreceated: a string as excite option is no longer supported and will be removed in the future, please use true or false'); + if ~isempty(excite) + excite = true; + else + excite = false; + end + else + excite = varargin{n+1}; + end + elseif (strcmpi(varargin{n},'PortNamePrefix')) + PortNamePrefix = varargin{n+1}; + else + excite_args{end+1} = varargin{n}; + excite_args{end+1} = varargin{n+1}; + end +end + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% normalize start and stop +nstart = min( [start;stop] ); +nstop = max( [start;stop] ); + +% determine index (1, 2 or 3) of propagation (length of CPW) +idx_prop = dir + 1; + +% determine index (1, 2 or 3) of width of CPW +dir = [0 0 0]; +dir(idx_prop) = 1; +idx_height = abs(cross(dir,evec0)) * [1;2;3]; + +% determine index (1, 2 or 3) of height +idx_width = abs(evec0) * [1;2;3]; + + +if (start(idx_height)~=stop(idx_height)) + error('openEMS:AddCPWPort','start/stop in height direction must be equal'); +end + +% direction of propagation +if stop(idx_prop)-start(idx_prop) > 0 + direction = +1; +else + direction = -1; +end + +% create the metal/material for the CPW +SL_start = start; +SL_stop = stop; +CSX = AddBox( CSX, materialname, prio, SL_start, SL_stop ); + +if isnan(measplanepos) + measplanepos = (nstart(idx_prop)+nstop(idx_prop))/2; +else + measplanepos = start(idx_prop)+direction*measplanepos; +end + +% calculate position of the voltage probes +mesh{1} = sort(CSX.RectilinearGrid.XLines); +mesh{2} = sort(CSX.RectilinearGrid.YLines); +mesh{3} = sort(CSX.RectilinearGrid.ZLines); +meshlines = interp1( mesh{idx_prop}, 1:numel(mesh{idx_prop}), measplanepos, 'nearest' ); +meshlines = mesh{idx_prop}(meshlines-1:meshlines+1); % get three lines (approx. at center) +if direction == -1 + meshlines = fliplr(meshlines); +end +SL_w2 = interp1( mesh{idx_width}, 1:numel(mesh{idx_width}), (nstart(idx_width)+nstop(idx_width))/2, 'nearest' ); +SL_w2 = mesh{idx_width}(SL_w2); % get e-line at center of CPW (SL_width/2) +v1_start(idx_prop) = meshlines(1); +v1_start(idx_width) = (nstart(idx_width)+nstop(idx_width))/2; +v1_start(idx_height) = start(idx_height); +v1_stop = v1_start; +v2_start = v1_start; +v2_stop = v1_stop; +v2_start(idx_prop) = meshlines(2); +v2_stop(idx_prop) = meshlines(2); +v3_start = v2_start; +v3_stop = v2_stop; +v3_start(idx_prop) = meshlines(3); +v3_stop(idx_prop) = meshlines(3); + +width_add_start = [0 0 0]; +width_add_stop = [0 0 0]; +width_add_start(idx_width) = (nstop(idx_width)-nstart(idx_width))/2; +width_add_stop(idx_width) = (nstop(idx_width)-nstart(idx_width))/2+gap_width; + +weight = 0.5; +% create the voltage-probes +port.U_filename{1,1} = [PortNamePrefix 'port_ut' num2str(portnr) 'A1']; +CSX = AddProbe( CSX, port.U_filename{1,1}, 0, 'weight', -1*weight ); +CSX = AddBox( CSX, port.U_filename{1,1}, prio, v1_start-width_add_start, v1_stop-width_add_stop); + +port.U_filename{1,2} = [PortNamePrefix 'port_ut' num2str(portnr) 'A2']; +CSX = AddProbe( CSX, port.U_filename{1,2}, 0, 'weight', weight ); +CSX = AddBox( CSX, port.U_filename{1,2}, prio, v1_start+width_add_start, v1_stop+width_add_stop); + + +port.U_filename{2,1} = [PortNamePrefix 'port_ut' num2str(portnr) 'B1']; +CSX = AddProbe( CSX, port.U_filename{2,1}, 0, 'weight', -1*weight ); +CSX = AddBox( CSX, port.U_filename{2,1}, prio, v2_start-width_add_start, v2_stop-width_add_stop ); + +port.U_filename{2,2} = [PortNamePrefix 'port_ut' num2str(portnr) 'B2']; +CSX = AddProbe( CSX, port.U_filename{2,2}, 0, 'weight', weight ); +CSX = AddBox( CSX, port.U_filename{2,2}, prio, v2_start+width_add_start, v2_stop+width_add_stop ); + + +port.U_filename{3,1} = [PortNamePrefix 'port_ut' num2str(portnr) 'C1']; +CSX = AddProbe( CSX, port.U_filename{3,1}, 0, 'weight', -1*weight ); +CSX = AddBox( CSX, port.U_filename{3,1}, prio, v3_start-width_add_start, v3_stop-width_add_stop ); + +port.U_filename{3,2} = [PortNamePrefix 'port_ut' num2str(portnr) 'C2']; +CSX = AddProbe( CSX, port.U_filename{3,2}, 0, 'weight', weight ); +CSX = AddBox( CSX, port.U_filename{3,2}, prio, v3_start+width_add_start, v3_stop+width_add_stop ); + +% calculate position of the current probes +idx = interp1( mesh{idx_width}, 1:numel(mesh{idx_width}), nstart(idx_width), 'nearest' ); +i1_start(idx_width) = mesh{idx_width}(idx) - diff(mesh{idx_width}(idx-1:idx))/2; +idx = interp1( mesh{idx_height}, 1:numel(mesh{idx_height}), start(idx_height), 'nearest' ); +i1_start(idx_height) = mesh{idx_height}(idx-1) - diff(mesh{idx_height}(idx-2:idx-1))/2; +i1_stop(idx_height) = mesh{idx_height}(idx+1) + diff(mesh{idx_height}(idx+1:idx+2))/2; +i1_start(idx_prop) = sum(meshlines(1:2))/2; +i1_stop(idx_prop) = i1_start(idx_prop); +idx = interp1( mesh{idx_width}, 1:numel(mesh{idx_width}), nstop(idx_width), 'nearest' ); +i1_stop(idx_width) = mesh{idx_width}(idx) + diff(mesh{idx_width}(idx:idx+1))/2; +i2_start = i1_start; +i2_stop = i1_stop; +i2_start(idx_prop) = sum(meshlines(2:3))/2; +i2_stop(idx_prop) = i2_start(idx_prop); + +% create the curr-probes +weight = direction; +port.I_filename{1} = [PortNamePrefix 'port_it' num2str(portnr) 'A']; +CSX = AddProbe( CSX, port.I_filename{1}, 1, 'weight', weight ); +CSX = AddBox( CSX, port.I_filename{1}, prio, i1_start, i1_stop ); +port.I_filename{2} = [PortNamePrefix 'port_it' num2str(portnr) 'B']; +CSX = AddProbe( CSX, port.I_filename{2}, 1,'weight', weight ); +CSX = AddBox( CSX, port.I_filename{2}, prio, i2_start, i2_stop ); + +% create port structure +port.LengthScale = 1; +if ((CSX.ATTRIBUTE.CoordSystem==1) && (idx_prop==2)) + port.LengthScale = SL_stop(idx_height); +end +port.nr = portnr; +port.type = 'CPW'; +port.drawingunit = CSX.RectilinearGrid.ATTRIBUTE.DeltaUnit; +port.v_delta = diff(meshlines)*port.LengthScale; +port.i_delta = diff( meshlines(1:end-1) + diff(meshlines)/2 )*port.LengthScale; +port.direction = direction; +port.excite = 0; +port.measplanepos = abs(v2_start(idx_prop) - start(idx_prop))*port.LengthScale; +% port + +% create excitation (if enabled) and port resistance +meshline = interp1( mesh{idx_prop}, 1:numel(mesh{idx_prop}), start(idx_prop) + feed_shift*direction, 'nearest' ); +ex_start(idx_prop) = mesh{idx_prop}(meshline) ; +ex_start(idx_width) = (nstart(idx_width)+nstop(idx_width))/2; +ex_start(idx_height) = nstart(idx_height); +ex_stop(idx_prop) = ex_start(idx_prop); +ex_stop(idx_width) = (nstart(idx_width)+nstop(idx_width))/2; +ex_stop(idx_height) = nstop(idx_height); + +port.excite = 0; +if excite + port.excite = 1; + CSX = AddExcitation( CSX, [PortNamePrefix 'port_excite_1_' num2str(portnr)], 0, evec, excite_args{:} ); + CSX = AddBox( CSX, [PortNamePrefix 'port_excite_1_' num2str(portnr)], prio, ex_start-width_add_start, ex_stop-width_add_stop ); + CSX = AddExcitation( CSX, [PortNamePrefix 'port_excite_2_' num2str(portnr)], 0, -evec, excite_args{:} ); + CSX = AddBox( CSX, [PortNamePrefix 'port_excite_2_' num2str(portnr)], prio, ex_start+width_add_start, ex_stop+width_add_stop ); +end + +%% CPW resitance at start of CPW line +ex_start(idx_prop) = start(idx_prop); +ex_stop(idx_prop) = ex_start(idx_prop); + +if (feed_R > 0) && ~isinf(feed_R) + CSX = AddLumpedElement( CSX, [PortNamePrefix 'port_resist_' int2str(portnr)], idx_width-1, 'R', 2*feed_R ); + CSX = AddBox( CSX, [PortNamePrefix 'port_resist_' int2str(portnr)], prio, ex_start-width_add_start, ex_stop-width_add_stop ); + CSX = AddBox( CSX, [PortNamePrefix 'port_resist_' int2str(portnr)], prio, ex_start+width_add_start, ex_stop+width_add_stop ); +elseif isinf(feed_R) + % do nothing --> open port +elseif feed_R == 0 + %port "resistance" as metal + CSX = AddBox( CSX, materialname, prio, ex_start-width_add_start, ex_stop-width_add_stop ); + CSX = AddBox( CSX, materialname, prio, ex_start+width_add_start, ex_stop+width_add_stop ); +else + error('openEMS:AddCPWPort','CPW port with resitance <= 0 it not possible'); +end +end |