From 95e6b22ccd72741a4b651deae208b184086f2e52 Mon Sep 17 00:00:00 2001 From: Thorsten Kukuk Date: Wed, 28 Jun 2006 14:41:18 +0000 Subject: Relevant BUGIDs: Purpose of commit: cleanup Commit summary: --------------- * doc/CREDITS: Removed. * doc/NOTES: Removed. * doc/pam_appl.sgml: Removed. * doc/pam_modules.sgml: Removed. * doc/pam_source.sgml: Removed. * doc/figs/pam_orient.txt: Removed. * doc/figs: Removed. * configure.in: Remove checks for sgml2* progrs, add sag, adg and mwg Makefiles. * doc/Makefile.am: Remove references to sgml, add sag, adg and mwg directories. --- doc/CREDITS | 49 -- doc/Makefile.am | 118 +--- doc/NOTES | 16 - doc/figs/pam_orient.txt | 23 - doc/pam_appl.sgml | 1777 ----------------------------------------------- doc/pam_modules.sgml | 1505 --------------------------------------- doc/pam_source.sgml | 1152 ------------------------------ 7 files changed, 4 insertions(+), 4636 deletions(-) delete mode 100644 doc/CREDITS delete mode 100644 doc/NOTES delete mode 100644 doc/figs/pam_orient.txt delete mode 100644 doc/pam_appl.sgml delete mode 100644 doc/pam_modules.sgml delete mode 100644 doc/pam_source.sgml (limited to 'doc') diff --git a/doc/CREDITS b/doc/CREDITS deleted file mode 100644 index df0eb599..00000000 --- a/doc/CREDITS +++ /dev/null @@ -1,49 +0,0 @@ - -Chris Adams, -Peter Allgeyer, -Tim Baverstock, -Tim Berger, -Craig S. Bell, -Derrick J. Brashear, -Ben Buxton, -Seth Chaiklin, -Oliver Crow, -Chris Dent, -Marc Ewing, -Cristian Gafton, -Emmanuel Galanos, -Brad M. Garcia, -Eric Hester, -Michel D'Hooge, -Roger Hu, -Eric Jacksch, -Michael K. Johnson, -David Kinchlea, -Olaf Kirch, -Marcin Korzonek, -Stephen Langasek, -Nicolai Langfeldt, -Elliot Lee, -Luke Kenneth Casson Leighton, -Al Longyear, -Ingo Luetkebohle, -Marek Michalkiewicz, -Robert Milkowski, -Aleph One, -Martin Pool, -Sean Reifschneider, -Jan Rekorajski, -Erik Troan, -Theodore Ts'o, -Jeff Uphoff, -Myles Uyema, -Savochkin Andrey Vladimirovich, -Ronald Wahl, -David Wood, -John Wilmes, -Joseph S. D. Yao -and -Alex O. Yuriev. diff --git a/doc/Makefile.am b/doc/Makefile.am index dd4cb520..c1e2586f 100644 --- a/doc/Makefile.am +++ b/doc/Makefile.am @@ -2,143 +2,33 @@ # Copyright (c) 2005, 2006 Thorsten Kukuk # -SUBDIRS = man specs +SUBDIRS = man specs sag adg mwg -FILES=pam pam_appl pam_modules -FSRCS=$(srcdir)/pam_appl.sgml $(srcdir)/pam_modules.sgml +CLEANFILES = *~ -TEXTS=txts/pam.txt txts/pam_appl.txt txts/pam_modules.txt -HTMLS=html/pam.html html/pam_appl.html html/pam_modules.html -PSFILES=ps/pam.ps ps/pam_appl.ps ps/pam_modules.ps -PDFFILES=pdf/pam.pdf pdf/pam_appl.pdf pdf/pam_modules.pdf - -MODULES=$(shell ls $(srcdir)/modules/*.sgml) - -CLEANFILES = *~ */*~ $(TEXTS) $(PSFILES) $(PDFFILES) html/pam*.html \ - ps/missfont.log MODULES-SGML pam.sgml - -EXTRA_DIST = $(FSRCS) CREDITS NOTES figs/pam_orient.txt pdf/README \ - ps/README html/index.html txts/README \ - pam_source.sgml $(MODULES) modules/module.sgml-template \ - modules/README +EXTRA_DIST = pdf/README html/index.html txts/README ####################################################### -all: html text postscript pdf - -html: $(HTMLS) - -$(HTMLS) : $(FSRCS) $(srcdir)/pam.sgml - @echo 'Building html documentation from files in modules/*.sgml' -if HAVE_SGML2HTML - @for i in $(FILES) ; do \ - if [ ! -f "html/$$i.html" ] || [ "$(srcdir)/$$i.sgml" -nt "html/$$i.html" ]; \ - then \ - mkdir -p html ; \ - cd html ; sgml2html ../$(srcdir)/$$i ; \ - if [ $$? -ne 0 ]; then exit 1 ; fi ; \ - cd .. ; \ - fi ; \ - done -else - @echo XXX - you do not have the sgml2html binary installed -endif - -text: $(TEXTS) - -$(TEXTS) : $(FSRCS) $(srcdir)/pam.sgml - @echo 'Building text documentation from files in modules/*.sgml' -if HAVE_SGML2TXT - @for i in $(FILES) ; do \ - if [ ! -f "txts/$$i.txt" ] \ - || [ "$(srcdir)/$$i.sgml" -nt "txts/$$i.txt" ]; then \ - mkdir -p txts ; \ - cd txts ; sgml2txt ../$(srcdir)/$$i ; cd .. ; \ - fi ; \ - done -else - @echo XXX - you do not have the sgml2txt binary installed -endif - -postscript: $(PSFILES) - -$(PSFILES): $(FSRCS) $(srcdir)/pam.sgml - @echo 'Building postscript documentation from files in modules/*.sgml' -if HAVE_SGML2PS - @for i in $(FILES) ; do \ - if [ ! -f "ps/$$i.ps" ] || [ "$(srcdir)/$$i.sgml" -nt "ps/$$i.ps" ]; then \ - mkdir -p ps ; \ - cd ps ; $(PSER) ../$(srcdir)/$$i ; cd .. ; \ - fi ; \ - done -else - @echo XXX - neither sgml2ps nor sgml2latex binaries are installed -endif - -pdf: $(PDFFILES) - -$(PDFFILES) : $(PSFILES) - @echo 'Building PDF documentation from files in modules/*.sgml' -if HAVE_SGML2PS -if HAVE_PS2PDF - @for i in $(FILES) ; do \ - if [ ! -f "pdf/$$i.pdf" ] || [ "ps/$$i.ps" -nt "ps/$$i.pdf" ]; then \ - mkdir -p pdf ; \ - ps2pdf ps/$$i.ps pdf/$$i.pdf ; \ - fi ; \ - done -else - @echo XXX - ps2pdf is not installed -endif -else - @echo XXX - neither sgml2ps nor sgml2latex binaries are installed -endif - -$(srcdir)/pam.sgml: $(srcdir)/pam_source.sgml MODULES-SGML CREDITS - @sed -e '/^/r MODULES-SGML' $(srcdir)/pam_source.sgml |\ - sed -e '/^/r CREDITS' > $(srcdir)/pam.sgml - -MODULES-SGML: $(MODULES) - @echo 'Building module text from files in modules/*.sgml' - @rm -f MODULES-SGML - @echo '' >> MODULES-SGML - @cat $(srcdir)/modules/*.sgml >> MODULES-SGML - -extraclean: clean - install-data-local: $(mkinstalldirs) $(DESTDIR)$(DOCDIR) -if HAVE_SGML2TXT $(mkinstalldirs) $(DESTDIR)$(DOCDIR)/text for file in txts/*.txt; do \ $(INSTALL_DATA) $$file $(DESTDIR)$(DOCDIR)/text; \ done -endif -if HAVE_SGML2PS - $(mkinstalldirs) $(DESTDIR)$(DOCDIR)/ps - for file in ps/*.ps; do \ - $(INSTALL_DATA) $$file $(DESTDIR)$(DOCDIR)/ps; \ - done -if HAVE_PS2PDF $(mkinstalldirs) $(DESTDIR)$(DOCDIR)/pdf for file in pdf/*.pdf; do \ $(INSTALL_DATA) $$file $(DESTDIR)$(DOCDIR)/pdf; \ done -endif -endif -if HAVE_SGML2HTML $(mkinstalldirs) $(DESTDIR)$(DOCDIR)/html for file in html/*.html; do \ $(INSTALL_DATA) $$file $(DESTDIR)$(DOCDIR)/html; \ done -endif releasedocs: all tar zvfc ../Linux-PAM-$(VERSION)-docs.tar.gz \ --exclude CVS --exclude .cvsignore --exclude '.#*' \ - --exclude README html ps txts pdf \ + --exclude README html txts pdf \ specs/draft-morgan-pam-current.txt specs/rfc86.0.txt tar jvfc ../Linux-PAM-$(VERSION)-docs.tar.bz2 \ --exclude CVS --exclude .cvsignore --exclude '.#*' \ diff --git a/doc/NOTES b/doc/NOTES deleted file mode 100644 index b0f40d47..00000000 --- a/doc/NOTES +++ /dev/null @@ -1,16 +0,0 @@ -Things to be added: - -@ modules: -@ application: - - use of - 'user' = user to become, - 'uid' = user requesting service - 'euid' = privilege of current process. - -@ sysadmin: - - included modules: - behavior - non-included modules: - behavior/pointers. diff --git a/doc/figs/pam_orient.txt b/doc/figs/pam_orient.txt deleted file mode 100644 index a8b745a1..00000000 --- a/doc/figs/pam_orient.txt +++ /dev/null @@ -1,23 +0,0 @@ - - - - +----------------+ - | application: X | - +----------------+ / +----------+ +================+ - | authentication-[---->--\--] Linux- |--<--| /etc/pam.conf | - | + [----<--/--] PAM | |================| - |[conversation()][--+ \ | | | X auth .. a.so | - +----------------+ | / +-n--n-----+ | X auth .. b.so | - | | | __| | | _____/ - | service user | A | | |____,-----' - | | | V A - +----------------+ +------|-----|---------+ -----+------+ - +---u-----u----+ | | | - | auth.... |--[ a ]--[ b ]--[ c ] - +--------------+ - | acct.... |--[ b ]--[ d ] - +--------------+ - | password |--[ b ]--[ c ] - +--------------+ - | session |--[ e ]--[ c ] - +--------------+ \ No newline at end of file diff --git a/doc/pam_appl.sgml b/doc/pam_appl.sgml deleted file mode 100644 index a80bcbb6..00000000 --- a/doc/pam_appl.sgml +++ /dev/null @@ -1,1777 +0,0 @@ - - - - -
- -The Linux-PAM Application Developers' Guide -<author>Andrew G. Morgan, <tt>morgan@kernel.org</tt> -<date>DRAFT v0.76 2001/12/08 -<abstract> -This manual documents what an application developer needs to know -about the <bf>Linux-PAM</bf> library. It describes how an application -might use the <bf>Linux-PAM</bf> library to authenticate users. In -addition it contains a description of the funtions to be found in -<tt/libpam_misc/ library, that can be used in general applications. -Finally, it contains some comments on PAM related security issues for -the application developer. -</abstract> - -<toc> - -<sect>Introduction - -<sect1>Synopsis - -<p> -For general applications that wish to use the services provided by -<bf/Linux-PAM/ the following is a summary of the relevant linking -information: -<tscreen> -<verb> -#include <security/pam_appl.h> - -cc -o application .... -lpam -ldl -</verb> -</tscreen> - -<p> -In addition to <tt/libpam/, there is a library of miscellaneous -functions that make the job of writing <em/PAM-aware/ applications -easier (this library is not covered in the DCE-RFC for PAM and is -specific to the Linux-PAM distribution): -<tscreen> -<verb> -... -#include <security/pam_misc.h> - -cc -o application .... -lpam -lpam_misc -ldl -</verb> -</tscreen> - -<sect1> Description - -<p> -<bf>Linux-PAM</bf> (Pluggable Authentication Modules for Linux) is a -library that enables the local system administrator to choose how -individual applications authenticate users. For an overview of the -<bf>Linux-PAM</bf> library see the <bf/Linux-PAM/ System -Administrators' Guide. - -<p> -It is the purpose of the <bf>Linux-PAM</bf> project to liberate the -development of privilege granting software from the development of -secure and appropriate authentication schemes. This is accomplished -by providing a documented library of functions that an application may -use for all forms of user authentication management. This library -dynamically loads locally configured authentication modules that -actually perform the authentication tasks. - -<p> -From the perspective of an application developer the information -contained in the local configuration of the PAM library should not be -important. Indeed it is intended that an application treat the -functions documented here as a ``black box'' that will deal with all -aspects of user authentication. ``All aspects'' includes user -verification, account management, session initialization/termination -and also the resetting of passwords (<em/authentication tokens/). - -<sect>Overview - -<p> -Most service-giving applications are restricted. In other words, -their service is not available to all and every prospective client. -Instead, the applying client must jump through a number of hoops to -convince the serving application that they are authorized to obtain -service. - -The process of <em/authenticating/ a client is what PAM is designed to -manage. In addition to authentication, PAM provides account -management, credential management, session management and -authentication-token (password changing) management services. It is -important to realize when writing a PAM based application that these -services are provided in a manner that is <bf>transparent</bf> to -the application. That is to say, when the application is written, no -assumptions can be made about <em>how</em> the client will be -authenticated. - -<p> -The process of authentication is performed by the PAM library via a -call to <tt>pam_authenticate()</tt>. The return value of this -function will indicate whether a named client (the <em>user</em>) has -been authenticated. If the PAM library needs to prompt the user for -any information, such as their <em>name</em> or a <em>password</em> -then it will do so. If the PAM library is configured to authenticate -the user using some silent protocol, it will do this too. (This -latter case might be via some hardware interface for example.) - -<p> -It is important to note that the application must leave all decisions -about when to prompt the user at the discretion of the PAM library. - -<p> -The PAM library, however, must work equally well for different styles -of application. Some applications, like the familiar <tt>login</tt> -and <tt>passwd</tt> are terminal based applications, exchanges of -information with the client in these cases is as plain text messages. -Graphically based applications, however, have a more sophisticated -interface. They generally interact with the user via specially -constructed dialogue boxes. Additionally, network based services -require that text messages exchanged with the client are specially -formatted for automated processing: one such example is <tt>ftpd</tt> -which prefixes each exchanged message with a numeric identifier. - -<p> -The presentation of simple requests to a client is thus something very -dependent on the protocol that the serving application will use. In -spite of the fact that PAM demands that it drives the whole -authentication process, it is not possible to leave such protocol -subtleties up to the PAM library. To overcome this potential problem, -the application provides the PAM library with a <em>conversation</em> -function. This function is called from <bf>within</bf> the PAM -library and enables the PAM to directly interact with the client. The -sorts of things that this conversation function must be able to do are -prompt the user with text and/or obtain textual input from the user -for processing by the PAM library. The details of this function are -provided in a later section. - -<p> -For example, the conversation function may be called by the PAM library -with a request to prompt the user for a password. Its job is to -reformat the prompt request into a form that the client will -understand. In the case of <tt>ftpd</tt>, this might involve prefixing -the string with the number <tt>331</tt> and sending the request over -the network to a connected client. The conversation function will -then obtain any reply and, after extracting the typed password, will -return this string of text to the PAM library. Similar concerns need -to be addressed in the case of an X-based graphical server. - -<p> -There are a number of issues that need to be addressed when one is -porting an existing application to become PAM compliant. A section -below has been devoted to this: Porting legacy applications. - -<p> -Besides authentication, PAM provides other forms of management. -Session management is provided with calls to -<tt>pam_open_session()</tt> and <tt>pam_close_session()</tt>. What -these functions actually do is up to the local administrator. But -typically, they could be used to log entry and exit from the system or -for mounting and unmounting the user's home directory. If an -application provides continuous service for a period of time, it -should probably call these functions, first open after the user is -authenticated and then close when the service is terminated. - -<p> -Account management is another area that an application developer -should include with a call to <tt/pam_acct_mgmt()/. This call will -perform checks on the good health of the user's account (has it -expired etc.). One of the things this function may check is whether -the user's authentication token has expired - in such a case the -application may choose to attempt to update it with a call to -<tt/pam_chauthtok()/, although some applications are not suited to -this task (<em>ftp</em> for example) and in this case the application -should deny access to the user. - -<p> -PAM is also capable of setting and deleting the users credentials with -the call <tt>pam_setcred()</tt>. This function should always be -called after the user is authenticated and before service is offered -to the user. By convention, this should be the last call to the PAM -library before the PAM session is opened. What exactly a credential -is, is not well defined. However, some examples are given in the -glossary below. - -<sect>The public interface to <bf>Linux-PAM</bf> - -<p> -Firstly, the relevant include file for the <bf>Linux-PAM</bf> library -is <tt><security/pam_appl.h></tt>. It contains the definitions -for a number of functions. After listing these functions, we collect -some guiding remarks for programmers. - -<sect1>What can be expected by the application - -<p> -Below we document those functions in the <bf/Linux-PAM/ library that -may be called from an application. - -<sect2>Initialization of Linux-PAM -<label id="pam-start-section"> - -<p> -<tscreen> -<verb> -extern int pam_start(const char *service_name, const char *user, - const struct pam_conv *pam_conversation, - pam_handle_t **pamh); -</verb> -</tscreen> - -<p> -This is the first of the <bf>Linux-PAM</bf> functions that must be -called by an application. It initializes the interface and reads the -system configuration file, <tt>/etc/pam.conf</tt> (see the -<bf/Linux-PAM/ System Administrators' Guide). Following a successful -return (<tt/PAM_SUCCESS/) the contents of <tt/*pamh/ is a handle that -provides continuity for successive calls to the <bf/Linux-PAM/ -library. The arguments expected by <tt/pam_start/ are as follows: the -<tt/service_name/ of the program, the <tt/user/name of the individual -to be authenticated, a pointer to an application-supplied -<tt/pam_conv/ structure and a pointer to a <tt/pam_handle_t/ -<em/pointer/. - -<p> -The <tt>pam_conv</tt> structure is discussed more fully in the section -<ref id="the-conversation-function" name="below">. The -<tt>pam_handle_t</tt> is a <em>blind</em> structure and the -application should not attempt to probe it directly for information. -Instead the <bf>Linux-PAM</bf> library provides the functions -<tt>pam_set_item</tt> and <tt>pam_get_item</tt>. These functions are -documented below. - -<sect2>Termination of the library -<label id="pam-end-section"> - -<p> -<tscreen> -<verb> -extern int pam_end(pam_handle_t *pamh, int pam_status); -</verb> -</tscreen> - -<p> -This function is the last function an application should call in the -<bf>Linux-PAM</bf> library. Upon return the handle <tt/pamh/ is no -longer valid and all memory associated with it will be invalid (likely -to cause a segmentation fault if accessed). - -<p> -Under normal conditions the argument <tt/pam_status/ has the value -PAM_SUCCESS, but in the event of an unsuccessful application for -service the appropriate <bf/Linux-PAM/ error-return value should be -used here. Note, <tt/pam_end()/ unconditionally shuts down the -authentication stack associated with the <tt/pamh/ handle. The value -taken by <tt/pam_status/ is used as an argument to the module specific -callback functions, <tt/cleanup()/ (see the <bf/Linux-PAM/ <htmlurl -url="pam_modules.html" name="Module Developers' Guide">). In this way, -the module can be given notification of the pass/fail nature of the -tear-down process, and perform any last minute tasks that are -appropriate to the module before it is unlinked. - -<sect2>Setting PAM items -<label id="pam-set-item-section"> - -<p> -<tscreen> -<verb> -extern int pam_set_item(pam_handle_t *pamh, int item_type, - const void *item); -</verb> -</tscreen> - -<p>This function is used to (re)set the value of one of the following -<bf/item_type/s: - -<p><descrip> -<tag><tt/PAM_SERVICE/</tag> - - The service name (which identifies that PAM stack that - <tt/libpam/ will use to authenticate the program). - -<tag><tt/PAM_USER/</tag> - - The username of the entity under whose identity service will - be given. That is, following authentication, <tt/PAM_USER/ - identifies the local entity that gets to use the - service. Note, this value can be mapped from something (eg., - "<tt/anonymous/") to something else (eg. "<tt/guest119/") by - any module in the PAM stack. As such an application should - consult the value of <tt/PAM_USER/ after each call to a - <tt/pam_*()/ function. - -<tag><tt/PAM_USER_PROMPT/</tag> - - The string used when prompting for a user's name. The default - value for this string is ``Please enter username: ''. - -<tag><tt/PAM_TTY/</tag> - - The terminal name: prefixed by <tt>/dev/</tt> if it is a - device file; for graphical, X-based, applications the value - for this item should be the <tt/$DISPLAY/ variable. - -<tag><tt/PAM_RUSER/</tag> - - The requesting entity: user's username for a locally - requesting user or a remote requesting user - generally an - application or module will attempt to supply the value that is - most strongly authenticated (a local account before a remote - one. The level of trust in this value is embodied in the - actual authentication stack associated with the application, - so it is ultimately at the discretion of the system - administrator. It should generally match the current - <tt/PAM_RHOST/ value. That is, "<tt/PAM_RUSER@PAM_RHOST/" - should always identify the requesting user. In some cases, - <tt/PAM_RUSER/ may be NULL. In such situations, it is unclear - who the requesting entity is. - -<tag><tt/PAM_RHOST/</tag> - - The requesting hostname (the hostname of the machine from - which the <tt/PAM_RUSER/ entity is requesting service). That - is "<tt/PAM_RUSER@PAM_RHOST/" does identify the requesting - user. "<tt/luser@localhost/" or "<tt/evil@evilcom.com/" are - valid "<tt/PAM_RUSER@PAM_RHOST/" examples. In some - applications, <tt/PAM_RHOST/ may be NULL. In such situations, - it is unclear where the authentication request is originating - from. - -<tag><tt/PAM_CONV/</tag> - - The conversation structure (see section <ref - id="the-conversation-function" name="below">). - -<tag><tt/PAM_FAIL_DELAY/</tag> A function pointer to redirect - centrally managed failure delays (see section <ref - id="the-failure-delay-function" name="below">). - -</descrip> - -<p> -For all <tt/item_type/s, other than <tt/PAM_CONV/ and -<tt/PAM_FAIL_DELAY/, <tt/item/ is a pointer to a <tt><NUL></tt> -terminated character string. In the case of <tt/PAM_CONV/, <tt/item/ -points to an initialized <tt/pam_conv/ structure (see section <ref -id="the-conversation-function" name="below">). In the case of -<tt/PAM_FAIL_DELAY/, <tt/item/ is a function pointer: <tt/void -(*delay_fn)(int retval, unsigned usec_delay, void *appdata_ptr)/ (see -section <ref id="the-failure-delay-function" name="below">). - -<p> -A successful call to this function returns <tt/PAM_SUCCESS/. However, -the application should expect at least one the following errors: - -<p> -<descrip> -<tag><tt/PAM_SYSTEM_ERR/</tag> - The <tt/pam_handle_t/ passed as a first argument to this - function was invalid. -<tag><tt/PAM_PERM_DENIED/</tag> - An attempt was made to replace the conversation structure with - a <tt/NULL/ value. -<tag><tt/PAM_BUF_ERR/</tag> - The function ran out of memory making a copy of the item. -<tag><tt/PAM_BAD_ITEM/</tag> - The application attempted to set an undefined or inaccessible - item. -</descrip> - -<sect2>Getting PAM items -<label id="pam-get-item-section"> - -<p> -<tscreen> -<verb> -extern int pam_get_item(const pam_handle_t *pamh, int item_type, - const void **item); -</verb> -</tscreen> - -<p> -This function is used to obtain the value of the indicated -<tt/item_type/. Upon successful return, <tt/*item/ contains a pointer -to the value of the corresponding item. Note, this is a pointer to -the <em/actual/ data and should <em/not/ be <tt/free()/'ed or -over-written! - -<p> -A successful call is signaled by a return value of <tt/PAM_SUCCESS/. -However, the application should expect one of the following errors: - -<p> -<descrip> -<tag><tt/PAM_SYSTEM_ERR/</tag> - The <tt/pam_handle_t/ passed as a first argument to this - function was invalid. -<tag><tt/PAM_PERM_DENIED/</tag> - The value of <tt/item/ was <tt/NULL/. -<tag><tt/PAM_BAD_ITEM/</tag> - The application attempted to set an undefined or inaccessible - item. -</descrip> - -<p> -In the case of an error, the contents of <tt/item/ is set to <tt/NULL/. - -<sect2>Understanding errors -<label id="pam-strerror-section"> - -<p> -<tscreen> -<verb> -extern const char *pam_strerror(pam_handle_t *pamh, int errnum); -</verb> -</tscreen> - -<p> -This function returns some text describing the <bf>Linux-PAM</bf> -error associated with the argument <tt/errnum/. If the error is not -recognized ``<tt/Unknown Linux-PAM error/'' is returned. - -<sect2>Planning for delays -<label id="the-failure-delay-function"> - -<p> -<tscreen> -<verb> -extern int pam_fail_delay(pam_handle_t *pamh, unsigned int micro_sec); -</verb> -</tscreen> - -<p> -This function is offered by <bf/Linux-PAM/ to facilitate time delays -following a failed call to <tt/pam_authenticate()/ and before control -is returned to the application. When using this function the -application programmer should check if it is available with, -<tscreen> -<verb> -#ifdef PAM_FAIL_DELAY - .... -#endif /* PAM_FAIL_DELAY */ -</verb> -</tscreen> - - -<p> -Generally, an application requests that a user is authenticated by -<bf/Linux-PAM/ through a call to <tt/pam_authenticate()/ or -<tt/pam_chauthtok()/. These functions call each of the <em/stacked/ -authentication modules listed in the relevant <bf/Linux-PAM/ -configuration file. As directed by this file, one of more of the -modules may fail causing the <tt/pam_...()/ call to return an error. -It is desirable for there to also be a pause before the application -continues. The principal reason for such a delay is security: a delay -acts to discourage <em/brute force/ dictionary attacks primarily, but -also helps hinder <em/timed/ (covert channel) attacks. - -<p> -The <tt/pam_fail_delay()/ function provides the mechanism by which an -application or module can suggest a minimum delay (of <tt/micro_sec/ -<em/micro-seconds/). <bf/Linux-PAM/ keeps a record of the longest time -requested with this function. Should <tt/pam_authenticate()/ fail, -the failing return to the application is delayed by an amount of time -randomly distributed (by up to 25%) about this longest value. - -<p> -Independent of success, the delay time is reset to its zero default -value when <bf/Linux-PAM/ returns control to the application. - -<p> -For applications written with a single thread that are event driven in -nature, <tt/libpam/ generating this delay may be undesirable. Instead, -the application may want to register the delay in some other way. For -example, in a single threaded server that serves multiple -authentication requests from a single event loop, the application -might want to simply mark a given connection as blocked until an -application timer expires. For this reason, <bf/Linux-PAM/ supplies -the <tt/PAM_FAIL_DELAY/ item. It can be queried and set with -<tt/pam_get_item()/ and <tt/pam_set_item()/ respectively. The value -used to set it should be a function pointer of the following -prototype: - -<tscreen> -<verb> -void (*delay_fn)(int retval, unsigned usec_delay, void *appdata_ptr); -</verb> -</tscreen> - -The arguments being the <tt/retval/ return code of the module stack, -the <tt/usec_delay/ micro-second delay that libpam is requesting and -the <tt/appdata_ptr/ that the application has associated with the -current <tt/pamh/ (<tt/pam_handle_t/). This last value was set by the -application when it called <tt/pam_start/ or explicitly with -<tt/pam_set_item(... , PAM_CONV, ...)/. Note, if <tt/PAM_FAIL_DELAY/ -is unset (or set to <tt/NULL/), then <tt/libpam/ will perform any -delay. - -<sect2>Authenticating the user - -<p> -<tscreen> -<verb> -extern int pam_authenticate(pam_handle_t *pamh, int flags); -</verb> -</tscreen> - -<p> -This function serves as an interface to the authentication mechanisms -of the loaded modules. The single <em/optional/ flag, which may be -logically OR'd with <tt/PAM_SILENT/, takes the following value, - -<p><descrip> - -<tag><tt/PAM_DISALLOW_NULL_AUTHTOK/</tag> - Instruct the authentication modules to return -<tt/PAM_AUTH_ERR/ if the user does not have a registered -authorization token---it is set to <tt/NULL/ in the system database. -</descrip> - -<p> -The value returned by this function is one of the following: - -<p><descrip> - -<tag><tt/PAM_AUTH_ERR/</tag> - The user was not authenticated -<tag><tt/PAM_CRED_INSUFFICIENT/</tag> - For some reason the application does not have sufficient -credentials to authenticate the user. -<tag><tt/PAM_AUTHINFO_UNAVAIL/</tag> - The modules were not able to access the authentication -information. This might be due to a network or hardware failure etc. -<tag><tt/PAM_USER_UNKNOWN/</tag> - The supplied username is not known to the authentication -service -<tag><tt/PAM_MAXTRIES/</tag> - One or more of the authentication modules has reached its -limit of tries authenticating the user. Do not try again. - -</descrip> - -<p> -If one or more of the authentication modules fails to load, for -whatever reason, this function will return <tt/PAM_ABORT/. - -<sect2>Setting user credentials -<label id="pam-setcred-section"> - -<p> -<tscreen> -<verb> -extern int pam_setcred(pam_handle_t *pamh, int flags); -</verb> -</tscreen> - -<p> -This function is used to set the module-specific credentials of the -user. It is usually called after the user has been authenticated, -after the account management function has been called but before a -session has been opened for the user. - -<p> -A credential is something that the user possesses. It is some -property, such as a <em>Kerberos</em> ticket, or a supplementary group -membership that make up the uniqueness of a given user. On a Linux -(or UN*X system) the user's <tt>UID</tt> and <tt>GID</tt>'s are -credentials too. However, it has been decided that these properties -(along with the default supplementary groups of which the user is a -member) are credentials that should be set directly by the application -and not by PAM. - -<p> -This function simply calls the <tt/pam_sm_setcred/ functions of each -of the loaded modules. Valid <tt/flags/, any one of which, may be -logically OR'd with <tt/PAM_SILENT/, are: - -<p><descrip> -<tag><tt/PAM_ESTABLISH_CRED/</tag> - Set the credentials for the authentication service, -<tag><tt/PAM_DELETE_CRED/</tag> - Delete the credentials associated with the authentication service, -<tag><tt/PAM_REINITIALIZE_CRED/</tag> - Reinitialize the user credentials, and -<tag><tt/PAM_REFRESH_CRED/</tag> - Extend the lifetime of the user credentials. -</descrip> - -<p> -A successful return is signalled with <tt/PAM_SUCCESS/. Errors that -are especially relevant to this function are the following: - -<p><descrip> -<tag><tt/PAM_CRED_UNAVAIL/</tag> - A module cannot retrieve the user's credentials. -<tag><tt/PAM_CRED_EXPIRED/</tag> - The user's credentials have expired. -<tag><tt/PAM_USER_UNKNOWN/</tag> - The user is not known to an authentication module. -<tag><tt/PAM_CRED_ERR/</tag> - A module was unable to set the credentials of the user. -</descrip> - -<sect2>Account management - -<p> -<tscreen> -<verb> -extern int pam_acct_mgmt(pam_handle_t *pamh, int flags); -</verb> -</tscreen> - -<p> -This function is typically called after the user has been -authenticated. It establishes whether the user's account is healthy. -That is to say, whether the user's account is still active and whether -the user is permitted to gain access to the system at this time. -Valid flags, any one of which, may be logically OR'd with -<tt/PAM_SILENT/, and are the same as those applicable to the -<tt/flags/ argument of <tt/pam_authenticate/. - -<p> -This function simply calls the corresponding functions of each of the -loaded modules, as instructed by the configuration file, -<tt>/etc/pam.conf</tt>. - -<p> -The normal response from this function is <tt/PAM_SUCCESS/, however, -specific failures are indicated by the following error returns: - -<descrip> -<tag><tt/PAM_AUTHTOKEN_REQD/</tag> -The user <bf/is/ valid but their authentication token has -<em/expired/. The correct response to this return-value is to require -that the user satisfies the <tt/pam_chauthtok()/ function before -obtaining service. It may not be possible for some applications to do -this. In such cases, the user should be denied access until such time -as they can update their password. - -<tag><tt/PAM_ACCT_EXPIRED/</tag> - The user is no longer permitted to access the system. -<tag><tt/PAM_AUTH_ERR/</tag> - There was an authentication error. - -<tag><tt/PAM_PERM_DENIED/</tag> - The user is not permitted to gain access at this time. -<tag><tt/PAM_USER_UNKNOWN/</tag> - The user is not known to a module's account management -component. - -</descrip> - -<sect2>Updating authentication tokens -<label id="pam-chauthtok-section"> - -<p> -<tscreen> -<verb> -extern int pam_chauthtok(pam_handle_t *pamh, const int flags); -</verb> -</tscreen> - -<p> -This function is used to change the authentication token for a given -user (as indicated by the state associated with the handle, -<tt/pamh/). The following is a valid but optional flag which may be -logically OR'd with <tt/PAM_SILENT/, - -<descrip> -<tag><tt/PAM_CHANGE_EXPIRED_AUTHTOK/</tag> - This argument indicates to the modules that the users -authentication token (password) should only be changed if it has -expired. -</descrip> - -<p> -Note, if this argument is not passed, the application requires that -<em/all/ authentication tokens are to be changed. - -<p> -<tt/PAM_SUCCESS/ is the only successful return value, valid -error-returns are: - -<descrip> -<tag><tt/PAM_AUTHTOK_ERR/</tag> - A module was unable to obtain the new authentication token. - -<tag><tt/PAM_AUTHTOK_RECOVERY_ERR/</tag> - A module was unable to obtain the old authentication token. - -<tag><tt/PAM_AUTHTOK_LOCK_BUSY/</tag> - One or more of the modules was unable to change the -authentication token since it is currently locked. - -<tag><tt/PAM_AUTHTOK_DISABLE_AGING/</tag> - Authentication token aging has been disabled for at least one -of the modules. - -<tag><tt/PAM_PERM_DENIED/</tag> - Permission denied. - -<tag><tt/PAM_TRY_AGAIN/</tag> - Not all of the modules were in a position to update the -authentication token(s). In such a case none of the user's -authentication tokens are updated. - -<tag><tt/PAM_USER_UNKNOWN/</tag> - The user is not known to the authentication token changing -service. - -</descrip> - -<sect2>Session initialization -<label id="pam-open-session-section"> - -<p> -<tscreen> -<verb> -extern int pam_open_session(pam_handle_t *pamh, int flags); -</verb> -</tscreen> - -<p> -This function is used to indicate that an authenticated session has -begun. It is used to inform the modules that the user is currently in -a session. It should be possible for the <bf>Linux-PAM</bf> library -to open a session and close the same session (see section <ref -id="pam-close-session-section" name="below">) from different -applications. - -<p> -Currently, this function simply calls each of the corresponding -functions of the loaded modules. The only valid flag is -<tt/PAM_SILENT/ and this is, of course, <em/optional/. - -<p> -If any of the <em/required/ loaded modules are unable to open a -session for the user, this function will return <tt/PAM_SESSION_ERR/. - -<sect2>Terminating sessions -<label id="pam-close-session-section"> - -<p> -<tscreen> -<verb> -extern int pam_close_session(pam_handle_t *pamh, int flags); -</verb> -</tscreen> - -<p> -This function is used to indicate that an authenticated session has -ended. It is used to inform the modules that the user is exiting a -session. It should be possible for the <bf>Linux-PAM</bf> library to -open a session and close the same session from different applications. - -<p> -This function simply calls each of the corresponding functions of the -loaded modules in the same order that they were invoked with -<tt/pam_open_session()/. The only valid flag is <tt/PAM_SILENT/ and -this is, of course, <em/optional/. - -<p> -If any of the <em/required/ loaded modules are unable to close a -session for the user, this function will return <tt/PAM_SESSION_ERR/. - -<sect2>Setting PAM environment variables -<label id="pam-putenv-section"> - -<p> -The <tt/libpam/ library associates with each PAM-handle (<tt/pamh/), a -set of <it/PAM environment variables/. These variables are intended to -hold the session environment variables that the user will inherit when -the session is granted and the authenticated user obtains access to -the requested service. For example, when <tt/login/ has finally given -the user a shell, the environment (as viewed with the command -<tt/env/) will be what <tt/libpam/ was maintaining as the PAM -environment for that service application. Note, these variables are not -the environment variables of the <tt/login/ application. This is -principally for two reasons: <tt/login/ may want to have an -environment that cannot be seen or manipulated by a user; and -<tt/login/ (or whatever the serving application is) may be maintaining -a number of parallel sessions, via different <tt/pamh/ values, at the -same time and a single environment may not be appropriately shared -between each of these. The PAM environment may contain variables -seeded by the applicant user's client program, for example, and as -such it is not appropriate for one applicant to interfere with the -environment of another applicant. - -<p> -<tscreen> -<verb> -extern int pam_putenv(pam_handle_t *pamh, const char *name_value); -</verb> -</tscreen> - -<p> -This function attempts to (re)set a <bf/Linux-PAM/ environment -variable. The <tt/name_value/ argument is a single <tt/NUL/ terminated -string of one of the following forms: -<descrip> -<tag>``<tt/NAME=value of variable/''</tag> - -In this case the environment variable of the given <tt/NAME/ is set to -the indicated value: ``<tt/value of variable/''. If this variable is -already known, it is overwritten. Otherwise it is added to the -<bf/Linux-PAM/ environment. - -<tag>``<tt/NAME=/''</tag> - -This function sets the variable to an empty value. It is listed -separately to indicate that this is the correct way to achieve such a -setting. - -<tag>``<tt/NAME/''</tag> - -Without an `<tt/=/' the <tt/pam_putenv()/ function will delete the -corresponding variable from the <bf/Linux-PAM/ environment. - -</descrip> - -<p> -Success is indicated with a return value of <tt/PAM_SUCCESS/. Failure -is indicated by one of the following returns: - -<descrip> -<tag><tt/PAM_PERM_DENIED/</tag> - name given is a <tt/NULL/ pointer - -<tag><tt/PAM_BAD_ITEM/</tag> - variable requested (for deletion) is not currently set - -<tag><tt/PAM_ABORT/</tag> - the <bf/Linux-PAM/ handle, <tt/pamh/, is corrupt - -<tag><tt/PAM_BUF_ERR/</tag> - failed to allocate memory when attempting update - -</descrip> - -<sect2>Getting a PAM environment variable -<label id="pam-getenv-section"> - -<p> -<tscreen> -<verb> -extern const char *pam_getenv(pam_handle_t *pamh, const char *name); -</verb> -</tscreen> - -<p> -Obtain the value of the indicated <bf/Linux-PAM/ environment -variable. On error, internal failure or the unavailability of the -given variable (unspecified), this function simply returns <tt/NULL/. - -<sect2>Getting the PAM environment -<label id="pam-getenvlist-section"> - -<p> -<tscreen> -<verb> -extern const char * const *pam_getenvlist(pam_handle_t *pamh); -</verb> -</tscreen> - -<p> -The PAM environment variables (see section <ref -id="pam-putenv-section" name="above">) are a complete set of enviroment -variables that are associated with a PAM-handle (<tt/pamh/). They -represent the contents of the <it/regular/ environment variables of -the authenticated user when service is granted. - -<p> -Th function, <tt>pam_getenvlist()</tt> returns a pointer to a complete, -<tt/malloc()/'d, copy of the PAM environment. It is a pointer to a -duplicated list of environment variables. It should be noted that -this memory will never be <tt/free()'d/ by <tt/libpam/. Once obtained -by a call to <tt/pam_getenvlist()/, <bf>it is the responsibility of -the calling application</bf> to <tt/free()/ this memory. - -<p> -The format of the memory is a <tt/malloc()/'d array of <tt/char */ -pointers, the last element of which is set to <tt/NULL/. Each of the -non-<tt/NULL/ entries in this array point to a <tt/NUL/ terminated and -<tt/malloc()/'d <tt/char/ string of the form: -<tt/"/<it/name/<tt/=/<it/value/<tt/"/. - -<p> -It is by design, and not a coincidence, that the format and contents -of the returned array matches that required for the third argument of -the <tt/execle(3)/ function call. - -<sect1>What is expected of an application - -<sect2>The conversation function -<label id="the-conversation-function"> - -<p> -An application must provide a ``conversation function''. It is used -for direct communication between a loaded module and the application -and will typically provide a means for the module to prompt the user -for a password etc. . The structure, <tt/pam_conv/, is defined by -including <tt><security/pam_appl.h></tt>; to be, - -<p> -<tscreen> -<verb> -struct pam_conv { - int (*conv)(int num_msg, - const struct pam_message **msg, - struct pam_response **resp, - void *appdata_ptr); - void *appdata_ptr; -}; -</verb> -</tscreen> - -<p> -It is initialized by the application before it is passed to the -library. The <em/contents/ of this structure are attached to the -<tt/*pamh/ handle. The point of this argument is to provide a -mechanism for any loaded module to interact directly with the -application program. This is why it is called a <em/conversation/ -structure. - -<p> -When a module calls the referenced <tt/conv()/ function, the argument -<tt/*appdata_ptr/ is set to the second element of this structure. - -<p> -The other arguments of a call to <tt/conv()/ concern the information -exchanged by module and application. That is to say, <tt/num_msg/ -holds the length of the array of pointers, <tt/msg/. After a -successful return, the pointer <tt/*resp/ points to an array of -<tt/pam_response/ structures, holding the application supplied text. -Note, <tt/*resp/ is an <tt/struct pam_response/ array and <em/not/ an -array of pointers. - -<p> -The message (from the module to the application) passing structure is -defined by <tt><security/pam_appl.h></tt> as: - -<p> -<tscreen> -<verb> -struct pam_message { - int msg_style; - const char *msg; -}; -</verb> -</tscreen> - -<p> -Valid choices for <tt/msg_style/ are: - -<p><descrip> -<tag><tt/PAM_PROMPT_ECHO_OFF/</tag> - Obtain a string without echoing any text -<tag><tt/PAM_PROMPT_ECHO_ON/</tag> - Obtain a string whilst echoing text -<tag><tt/PAM_ERROR_MSG/</tag> - Display an error -<tag><tt/PAM_TEXT_INFO/</tag> - Display some text. -</descrip> - -<p> -The point of having an array of messages is that it becomes possible -to pass a number of things to the application in a single call from -the module. It can also be convenient for the application that related -things come at once: a windows based application can then present a -single form with many messages/prompts on at once. - -<p> -In passing, it is worth noting that there is a descrepency between the -way Linux-PAM handles the <tt/const struct pam_message **msg/ -conversation function argument from the way that Solaris' PAM (and -derivitives, known to include HP/UX, <em/are there others?/) -does. Linux-PAM interprets the <tt/msg/ argument as entirely -equivalent to the following prototype <tt/const struct pam_message -*msg[]/ (which, in spirit, is consistent with the commonly used -prototypes for <tt/argv/ argument to the familiar <tt/main()/ -function: <tt/char **argv/; and <tt/char *argv[]/). Said another way -Linux-PAM interprets the <tt/msg/ argument as a pointer to an array of -<tt/num_meg/ read only 'struct pam_message' <em/pointers/. Solaris' -PAM implementation interprets this argument as a pointer to a pointer -to an array of <tt/num_meg/ <tt/pam_message/ structures. Fortunately, -perhaps, for most module/application developers when <tt/num_msg/ has -a value of one these two definitions are entirely -equivalent. Unfortunately, casually raising this number to two has led -to unanticipated compatibility problems. - -<p> -For what its worth the two known module writer work-arounds for trying -to maintain source level compatibility with both PAM implementations -are: -<itemize> -<item> never call the conversation function with <tt/num_msg/ greater -than one. -<item> set up <tt/msg/ as doubly referenced so both types of -conversation function can find the messages. That is, make -<p><tscreen> -<verb> -msg[n] = & (( *msg )[n]) -</verb> -</tscreen> -</itemize> -<p> -The response (from the application to the module) passing structure is -defined by including <tt><security/pam_appl.h></tt> as: - -<p><tscreen><verb> -struct pam_response { - char *resp; - int resp_retcode; -}; -</verb></tscreen> - -<p> -Currently, there are no definitions for <tt/resp_retcode/ values; the -normal value is <tt/0/. - -<p> -Prior to the 0.59 release of Linux-PAM, the length of the returned -<tt/pam_response/ array was equal to the number of <em/prompts/ (types -<tt/PAM_PROMPT_ECHO_OFF/ and <tt/PAM_PROMPT_ECHO_ON/) in the -<tt/pam_message/ array with which the conversation function was -called. This meant that it was not always necessary for the module to -<tt/free(3)/ the responses if the conversation function was only used -to display some text. - -<p> -Post Linux-PAM-0.59. The number of responses is always equal to the -<tt/num_msg/ conversation function argument. This is slightly easier -to program but does require that the response array is <tt/free(3)/'d -after every call to the conversation function. The index of the -responses corresponds directly to the prompt index in the -<tt/pam_message/ array. - -<p> -The maximum length of the <tt/pam_msg.msg/ and <tt/pam_response.resp/ -character strings is <tt/PAM_MAX_MSG_SIZE/. (This is not enforced by -Linux-PAM.) - -<p> -<tt/PAM_SUCCESS/ is the expected return value of this -function. However, should an error occur the application should not -set <tt/*resp/ but simply return <tt/PAM_CONV_ERR/. - -<p> -Note, if an application wishes to use two conversation functions, it -should activate the second with a call to <tt/pam_set_item()/. - -<p> -<bf>Notes:</bf> New item types are being added to the conversation -protocol. Currently Linux-PAM supports: <tt>PAM_BINARY_PROMPT</tt> -and <tt>PAM_BINARY_MSG</tt>. These two are intended for server-client -hidden information exchange and may be used as an interface for -maching-machine authentication. - -<sect1>Programming notes - -<p> -Note, all of the authentication service function calls accept the -token <tt/PAM_SILENT/, which instructs the modules to not send -messages to the application. This token can be logically OR'd with any -one of the permitted tokens specific to the individual function calls. -<tt/PAM_SILENT/ does not override the prompting of the user for -passwords etc., it only stops informative messages from being -generated. - -<sect>Security issues of <bf>Linux-PAM</bf> - -<p> -PAM, from the perspective of an application, is a convenient API for -authenticating users. PAM modules generally have no increased -privilege over that possessed by the application that is making use of -it. For this reason, the application must take ultimate responsibility -for protecting the environment in which PAM operates. - -<p> -A poorly (or maliciously) written application can defeat any -<bf/Linux-PAM/ module's authentication mechanisms by simply ignoring -it's return values. It is the applications task and responsibility to -grant privileges and access to services. The <bf/Linux-PAM/ library -simply assumes the responsibility of <em/authenticating/ the user; -ascertaining that the user <em/is/ who they say they are. Care should -be taken to anticipate all of the documented behavior of the -<bf/Linux-PAM/ library functions. A failure to do this will most -certainly lead to a future security breach. - -<sect1>Care about standard library calls - -<p> -In general, writers of authorization-granting applications should -assume that each module is likely to call any or <em/all/ `libc' -functions. For `libc' functions that return pointers to -static/dynamically allocated structures (ie. the library allocates the -memory and the user is not expected to `<tt/free()/' it) any module -call to this function is likely to corrupt a pointer previously -obtained by the application. The application programmer should either -re-call such a `libc' function after a call to the <bf/Linux-PAM/ -library, or copy the structure contents to some safe area of memory -before passing control to the <bf/Linux-PAM/ library. - -<p> -Two important function classes that fall into this category are -<tt>getpwnam(3)</tt> and <tt>syslog(3)</tt>. - -<sect1>Choice of a service name - -<p> -When picking the <em/service-name/ that corresponds to the first entry -in the <bf/Linux-PAM/ configuration file, the application programmer -should <bf/avoid/ the temptation of choosing something related to -<tt/argv[0]/. It is a trivial matter for any user to invoke any -application on a system under a different name and this should not be -permitted to cause a security breach. - -<p> -In general, this is always the right advice if the program is setuid, -or otherwise more privileged than the user that invokes it. In some -cases, avoiding this advice is convenient, but as an author of such an -application, you should consider well the ways in which your program -will be installed and used. (Its often the case that programs are not -intended to be setuid, but end up being installed that way for -convenience. If your program falls into this category, don't fall into -the trap of making this mistake.) - -<p> -To invoke some <tt/target/ application by another name, the user may -symbolically link the target application with the desired name. To be -precise all the user need do is, -<tscreen> -<verb> -ln -s /target/application ./preferred_name -</verb> -</tscreen> -and then <em/run/ <tt>./preferred_name</tt> - -<p> -By studying the <bf/Linux-PAM/ configuration file(s), an attacker can -choose the <tt/preferred_name/ to be that of a service enjoying -minimal protection; for example a game which uses <bf/Linux-PAM/ to -restrict access to certain hours of the day. If the service-name were -to be linked to the filename under which the service was invoked, it -is clear that the user is effectively in the position of dictating -which authentication scheme the service uses. Needless to say, this -is not a secure situation. - -<p> -The conclusion is that the application developer should carefully -define the service-name of an application. The safest thing is to make -it a single hard-wired name. - -<sect1>The conversation function - -<p> -Care should be taken to ensure that the <tt/conv()/ function is -robust. Such a function is provided in the library <tt/libpam_misc/ -(see <ref id="libpam-misc-section" name="below">). - -<sect1>The identity of the user - -<p> -The <bf/Linux-PAM/ modules will need to determine the identity of the -user who requests a service, and the identity of the user who grants -the service. These two users will seldom be the same. Indeed there -is generally a third user identity to be considered, the new (assumed) -identity of the user once the service is granted. - -<p> -The need for keeping tabs on these identities is clearly an issue of -security. One convention that is actively used by some modules is -that the identity of the user requesting a service should be the -current <tt/uid/ (userid) of the running process; the identity of the -privilege granting user is the <tt/euid/ (effective userid) of the -running process; the identity of the user, under whose name the -service will be executed, is given by the contents of the -<tt/PAM_USER/ <tt/pam_get_item(3)/. Note, modules can change the -values of <tt/PAM_USER/ and <tt/PAM_RUSER/ during any of the -<tt/pam_*()/ library calls. For this reason, the application should -take care to use the <tt/pam_get_item()/ every time it wishes to -establish who the authenticated user is (or will currently be). - -<p> -For network-serving databases and other applications that provide -their own security model (independent of the OS kernel) the above -scheme is insufficient to identify the requesting user. - -<p> -A more portable solution to storing the identity of the requesting -user is to use the <tt/PAM_RUSER/ <tt/pam_get_item(3)/. The -application should supply this value before attempting to authenticate -the user with <tt/pam_authenticate()/. How well this name can be -trusted will ultimately be at the discretion of the local -administrator (who configures PAM for your application) and a selected -module may attempt to override the value where it can obtain more -reliable data. If an application is unable to determine the identity -of the requesting entity/user, it should not call <tt/pam_set_item(3)/ -to set <tt/PAM_RUSER/. - -<p> -In addition to the <tt/PAM_RUSER/ item, the application should supply -the <tt/PAM_RHOST/ (<em/requesting host/) item. As a general rule, the -following convention for its value can be assumed: <tt/<unset>/ -= unknown; <tt/localhost/ = invoked directly from the local system; -<em/other.place.xyz/ = some component of the user's connection -originates from this remote/requesting host. At present, PAM has no -established convention for indicating whether the application supports -a trusted path to communication from this host. - -<sect1>Sufficient resources - -<p> -Care should be taken to ensure that the proper execution of an -application is not compromised by a lack of system resources. If an -application is unable to open sufficient files to perform its service, -it should fail gracefully, or request additional resources. -Specifically, the quantities manipulated by the <tt/setrlimit(2)/ -family of commands should be taken into consideration. - -<p> -This is also true of conversation prompts. The application should not -accept prompts of arbitrary length with out checking for resource -allocation failure and dealing with such extreme conditions gracefully -and in a mannor that preserves the PAM API. Such tolerance may be -especially important when attempting to track a malicious adversary. - -<sect>A library of miscellaneous helper functions -<label id="libpam-misc-section"> - -<p> -To aid the work of the application developer a library of -miscellaneous functions is provided. It is called <tt/libpam_misc/, -and contains functions for allocating memory (securely), a text based -conversation function, and routines for enhancing the standard -PAM-environment variable support. - -<sect1>Requirements - -<p> -The functions, structures and macros, made available by this library -can be defined by including <tt><security/pam_misc.h></tt>. It -should be noted that this library is specific to <bf/Linux-PAM/ and is -not referred to in the defining DCE-RFC (see <ref id="bibliography" -name="the bibliography">) below. - -<sect1>Macros supplied - -<sect2>Safe duplication of strings - -<p> -<tscreen> -<verb> -x_strdup(const char *s) -</verb> -</tscreen> - -<p> -This macro is a replacement for the <tt/xstrdup()/ function that was -present in earlier versions of the library and which clashed horribly -with a number of applications. It returns a duplicate copy of the -<tt/NUL/ terminated string, <tt/s/. <tt/NULL/ is returned if there is -insufficient memory available for the duplicate or if <tt/s/ is -<tt/NULL/ to begin with. - -<sect1>Functions supplied - -<sect2>A text based conversation function - -<p> -<tscreen> -<verb> -extern int misc_conv(int num_msg, const struct pam_message **msgm, - struct pam_response **response, void *appdata_ptr); -</verb> -</tscreen> - -<p> -This is a function that will prompt the user with the appropriate -comments and obtain the appropriate inputs as directed by -authentication modules. - -<p> -In addition to simply slotting into the appropriate <tt/struct -pam_conv/, this function provides some time-out facilities. The -function exports five variables that can be used by an application -programmer to limit the amount of time this conversation function will -spend waiting for the user to type something. - -<p> -The five variables are as follows: -<descrip> -<tag><tt>extern time_t pam_misc_conv_warn_time;</tt></tag> - -This variable contains the <em/time/ (as returned by <tt/time()/) that -the user should be first warned that the clock is ticking. By default -it has the value <tt/0/, which indicates that no such warning will be -given. The application may set its value to sometime in the future, -but this should be done prior to passing control to the <bf/Linux-PAM/ -library. - -<tag><tt>extern const char *pam_misc_conv_warn_line;</tt></tag> - -Used in conjuction with <tt/pam_misc_conv_warn_time/, this variable is -a pointer to the string that will be displayed when it becomes time to -warn the user that the timeout is approaching. Its default value is -``..\a.Time is running out...\n'', but this can be changed -by the application prior to passing control to <bf/Linux-PAM/. - -<tag><tt>extern time_t pam_misc_conv_die_time;</tt></tag> - -This variable contains the <em/time/ (as returned by <tt/time()/) that -the conversation will time out. By default it has the value <tt/0/, -which indicates that the conversation function will not timeout. The -application may set its value to sometime in the future, this should -be done prior to passing control to the <bf/Linux-PAM/ library. - -<tag><tt>extern const char *pam_misc_conv_die_line;</tt></tag> - -Used in conjuction with <tt/pam_misc_conv_die_time/, this variable is -a pointer to the string that will be displayed when the conversation -times out. Its default value is ``..\a.Sorry, your time is -up!\n'', but this can be changed by the application prior to -passing control to <bf/Linux-PAM/. - -<tag><tt>extern int pam_misc_conv_died;</tt></tag> - -Following a return from the <bf/Linux-PAM/ libraray, the value of this -variable indicates whether the conversation has timed out. A value of -<tt/1/ indicates the time-out occurred. - -</descrip> - -<p> -The following two function pointers are available for supporting binary -prompts in the conversation function. They are optimized for the -current incarnation of the <tt/libpamc/ library and are subject to -change. -<descrip> -<tag><tt>extern int (*pam_binary_handler_fn)(void *appdata, pamc_bp_t -*prompt_p);</tt></tag> - -This function pointer is initialized to <tt/NULL/ but can be filled -with a function that provides machine-machine (hidden) message -exchange. It is intended for use with hidden authentication protocols -such as RSA or Diffie-Hellman key exchanges. (This is still under -development.) - -<tag><tt>extern int (*pam_binary_handler_free)(void *appdata, -pamc_bp_t *delete_me);</tt></tag> - -This function pointer is initialized to <tt/PAM_BP_RENEW(delete_me, 0, -0)/, but can be redefined as desired by the application. - -</descrip> - -<sect2>Transcribing an environment to that of Linux-PAM -<p> -<tscreen> -<verb> -extern int pam_misc_paste_env(pam_handle_t *pamh, - const char * const * user_env); -</verb> -</tscreen> - -This function takes the supplied list of environment pointers and -<em/uploads/ its contents to the <bf/Linux-PAM/ environment. Success -is indicated by <tt/PAM_SUCCESS/. - -<sect2>Liberating a locally saved environment -<p> -<tscreen> -<verb> -extern char **pam_misc_drop_env(char **env); -</verb> -</tscreen> - -This function is defined to complement the <tt/pam_getenvlist()/ -function. It liberates the memory associated with <tt/env/, -<em/overwriting/ with <tt/0/ all memory before <tt/free()/ing it. - -<sect2>BSD like Linux-PAM environment variable setting -<p> -<tscreen> -<verb> -extern int pam_misc_setenv(pam_handle_t *pamh, const char *name, - const char *value, int readonly); -</verb> -</tscreen> - -This function performs a task equivalent to <tt/pam_putenv()/, its -syntax is, however, more like the BSD style function; <tt/setenv()/. -The <tt/name/ and <tt/value/ are concatenated with an ``<tt/=/'' to -form a <tt/name_value/ and passed to <tt/pam_putenv()/. If, however, -the <bf/Linux-PAM/ variable is already set, the replacement will only -be applied if the last argument, <tt/readonly/, is zero. - -<sect>Porting legacy applications - -<p> -The following is extracted from an email. I'll tidy it up later. - -<p> -The point of PAM is that the application is not supposed to have any -idea how the attached authentication modules will choose to -authenticate the user. So all they can do is provide a conversation -function that will talk directly to the user(client) on the modules' -behalf. - -<p> -Consider the case that you plug a retinal scanner into the login -program. In this situation the user would be prompted: "please look -into the scanner". No username or password would be needed - all this -information could be deduced from the scan and a database lookup. The -point is that the retinal scanner is an ideal task for a "module". - -<p> -While it is true that a pop-daemon program is designed with the POP -protocol in mind and no-one ever considered attaching a retinal -scanner to it, it is also the case that the "clean" PAM'ification of -such a daemon would allow for the possibility of a scanner module -being be attached to it. The point being that the "standard" -pop-authentication protocol(s) [which will be needed to satisfy -inflexible/legacy clients] would be supported by inserting an -appropriate pam_qpopper module(s). However, having rewritten popd -once in this way any new protocols can be implemented in-situ. - -<p> -One simple test of a ported application would be to insert the -<tt/pam_permit/ module and see if the application demands you type a -password... In such a case, <tt/xlock/ would fail to lock the -terminal - or would at best be a screen-saver, ftp would give password -free access to all etc.. Neither of these is a very secure thing to -do, but they do illustrate how much flexibility PAM puts in the hands -of the local admin. - -<p> -The key issue, in doing things correctly, is identifying what is part -of the authentication procedure (how many passwords etc..) the -exchange protocol (prefixes to prompts etc., numbers like 331 in the -case of ftpd) and what is part of the service that the application -delivers. PAM really needs to have total control in the -authentication "procedure", the conversation function should only -deal with reformatting user prompts and extracting responses from raw -input. - -<sect>Glossary of PAM related terms - -<p> -The following are a list of terms used within this document. - -<p> -<descrip> - -<tag>Authentication token</tag> -Generally, this is a password. However, a user can authenticate -him/herself in a variety of ways. Updating the user's authentication -token thus corresponds to <em>refreshing</em> the object they use to -authenticate themself with the system. The word password is avoided -to keep open the possibility that the authentication involves a -retinal scan or other non-textual mode of challenge/response. - -<tag>Credentials</tag> -Having successfully authenticated the user, PAM is able to establish -certain characteristics/attributes of the user. These are termed -<em>credentials</em>. Examples of which are group memberships to -perform privileged tasks with, and <em>tickets</em> in the form of -environment variables etc. . Some user-credentials, such as the -user's UID and GID (plus default group memberships) are not deemed to -be PAM-credentials. It is the responsibility of the application to -grant these directly. - -</descrip> - -<sect>An example application - -<p> -To get a flavor of the way a <tt/Linux-PAM/ application is written we -include the following example. It prompts the user for their password -and indicates whether their account is valid on the standard output, -its return code also indicates the success (<tt/0/ for success; <tt/1/ -for failure). - -<p> -<tscreen> -<verb> -/* - This program was contributed by Shane Watts - [modifications by AGM] - - You need to add the following (or equivalent) to the /etc/pam.conf file. - # check authorization - check_user auth required /usr/lib/security/pam_unix_auth.so - check_user account required /usr/lib/security/pam_unix_acct.so - */ - -#include <security/pam_appl.h> -#include <security/pam_misc.h> -#include <stdio.h> - -static struct pam_conv conv = { - misc_conv, - NULL -}; - -int main(int argc, char *argv[]) -{ - pam_handle_t *pamh=NULL; - int retval; - const char *user="nobody"; - - if(argc == 2) { - user = argv[1]; - } - - if(argc > 2) { - fprintf(stderr, "Usage: check_user [username]\n"); - exit(1); - } - - retval = pam_start("check_user", user, &ero;conv, &ero;pamh); - - if (retval == PAM_SUCCESS) - retval = pam_authenticate(pamh, 0); /* is user really user? */ - - if (retval == PAM_SUCCESS) - retval = pam_acct_mgmt(pamh, 0); /* permitted access? */ - - /* This is where we have been authorized or not. */ - - if (retval == PAM_SUCCESS) { - fprintf(stdout, "Authenticated\n"); - } else { - fprintf(stdout, "Not Authenticated\n"); - } - - if (pam_end(pamh,retval) != PAM_SUCCESS) { /* close Linux-PAM */ - pamh = NULL; - fprintf(stderr, "check_user: failed to release authenticator\n"); - exit(1); - } - - return ( retval == PAM_SUCCESS ? 0:1 ); /* indicate success */ -} -</verb> -</tscreen> - -<sect>Files - -<p><descrip> - -<tag><tt>/usr/include/security/pam_appl.h</tt></tag> - -header file for <bf/Linux-PAM/ applications interface - -<tag><tt>/usr/include/security/pam_misc.h</tt></tag> - -header file for useful library functions for making applications -easier to write - -<tag><tt>/usr/lib/libpam.so.*</tt></tag> - -the shared library providing applications with access to -<bf/Linux-PAM/. - -<tag><tt>/etc/pam.conf</tt></tag> - -the <bf/Linux-PAM/ configuration file. - -<tag><tt>/usr/lib/security/pam_*.so</tt></tag> - -the primary location for <bf/Linux-PAM/ dynamically loadable object -files; the modules. - -</descrip> - -<sect>See also -<label id="bibliography"> - -<p><itemize> - -<item>The <bf/Linux-PAM/ -<htmlurl url="pam.html" name="System Administrators' Guide">. - -<item>The <bf/Linux-PAM/ -<htmlurl url="pam_modules.html" name="Module Writers' Guide">. - -<item>The V. Samar and R. Schemers (SunSoft), ``UNIFIED LOGIN WITH -PLUGGABLE AUTHENTICATION MODULES'', Open Software Foundation Request -For Comments 86.0, October 1995. - -</itemize> - -<sect>Notes - -<p> -I intend to put development comments here... like ``at the moment -this isn't actually supported''. At release time what ever is in -this section will be placed in the Bugs section below! :) - -<p> -<itemize> - -<item> <tt/pam_strerror()/ should be internationalized.... - -<item> -Note, the <tt/resp_retcode/ of struct <tt/pam_message/, has no -purpose at the moment. Ideas/suggestions welcome! - -<item> more security issues are required.... - -</itemize> - -<sect>Author/acknowledgments - -<p> -This document was written by Andrew G. Morgan -(morgan@kernel.org) with many contributions from -<!-- insert credits here --> -<!-- - an sgml list of people to credit for their contributions to Linux-PAM - $Id$ - --> -Chris Adams, -Peter Allgeyer, -Tim Baverstock, -Tim Berger, -Craig S. Bell, -Derrick J. Brashear, -Ben Buxton, -Seth Chaiklin, -Oliver Crow, -Chris Dent, -Marc Ewing, -Cristian Gafton, -Emmanuel Galanos, -Brad M. Garcia, -Eric Hester, -Roger Hu, -Eric Jacksch, -Michael K. Johnson, -David Kinchlea, -Olaf Kirch, -Marcin Korzonek, -Stephen Langasek, -Nicolai Langfeldt, -Elliot Lee, -Luke Kenneth Casson Leighton, -Al Longyear, -Ingo Luetkebohle, -Marek Michalkiewicz, -Robert Milkowski, -Aleph One, -Martin Pool, -Sean Reifschneider, -Jan Rekorajski, -Erik Troan, -Theodore Ts'o, -Jeff Uphoff, -Myles Uyema, -Savochkin Andrey Vladimirovich, -Ronald Wahl, -David Wood, -John Wilmes, -Joseph S. D. Yao -and -Alex O. Yuriev. - -<p> -Thanks are also due to Sun Microsystems, especially to Vipin Samar and -Charlie Lai for their advice. At an early stage in the development of -<bf/Linux-PAM/, Sun graciously made the documentation for their -implementation of PAM available. This act greatly accelerated the -development of <bf/Linux-PAM/. - -<sect>Bugs/omissions - -<p> -This manual is hopelessly unfinished. Only a partial list of people is -credited for all the good work they have done. - -<sect>Copyright information for this document - -<p> -Copyright (c) Andrew G. Morgan 1996-9,2000-1. All rights reserved. -<newline> -Email: <tt><morgan@kernel.org></tt> - -<p> -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are -met: - -<p> -<itemize> - -<item> -1. Redistributions of source code must retain the above copyright - notice, and the entire permission notice in its entirety, - including the disclaimer of warranties. - -<item> -2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - -<item> -3. The name of the author may not be used to endorse or promote - products derived from this software without specific prior - written permission. - -</itemize> - -<p> -<bf/Alternatively/, this product may be distributed under the terms of -the GNU General Public License (GPL), in which case the provisions of -the GNU GPL are required <bf/instead of/ the above restrictions. -(This clause is necessary due to a potential bad interaction between -the GNU GPL and the restrictions contained in a BSD-style copyright.) - -<p> -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR -TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -DAMAGE. - -<p> -<tt>$Id$</tt> - -</article> diff --git a/doc/pam_modules.sgml b/doc/pam_modules.sgml deleted file mode 100644 index 872e4d7d..00000000 --- a/doc/pam_modules.sgml +++ /dev/null @@ -1,1505 +0,0 @@ -<!doctype linuxdoc system> - -<!-- - - $Id$ - - Copyright (c) Andrew G. Morgan 1996-2001. All rights reserved. - - ** some sections, in this document, were contributed by other - ** authors. They carry individual copyrights. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are -met: - -1. Redistributions of source code must retain the above copyright - notice, and the entire permission notice in its entirety, - including the disclaimer of warranties. - -2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - -3. The name of the author may not be used to endorse or promote - products derived from this software without specific prior - written permission. - -ALTERNATIVELY, this product may be distributed under the terms of the -GNU General Public License, in which case the provisions of the GNU -GPL are required INSTEAD OF the above restrictions. (This clause is -necessary due to a potential bad interaction between the GNU GPL and -the restrictions contained in a BSD-style copyright.) - -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR -TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -DAMAGE. - - --> - -<article> - -<title>The Linux-PAM Module Writers' Guide -<author>Andrew G. Morgan, <tt>morgan@kernel.org</tt> -<date>DRAFT v0.76 2002/05/09 -<abstract> -This manual documents what a programmer needs to know in order to -write a module that conforms to the <bf/Linux-PAM/ standard. It also -discusses some security issues from the point of view of the module -programmer. -</abstract> - -<toc> - -<sect>Introduction - -<sect1> Synopsis -<p> -<tscreen> -<verb> -#include <security/pam_modules.h> - -gcc -fPIC -c pam_module-name.c -ld -x --shared -o pam_module-name.so pam_module-name.o -</verb> -</tscreen> - -<sect1> Description - -<p> -<bf/Linux-PAM/ (Pluggable Authentication Modules for Linux) is a -library that enables the local system administrator to choose how -individual applications authenticate users. For an overview of the -<bf/Linux-PAM/ library see the <bf/Linux-PAM/ System Administrators' -Guide. - -<p> -A <bf/Linux-PAM/ module is a single executable binary file that can be -loaded by the <bf/Linux-PAM/ interface library. This PAM library is -configured locally with a system file, <tt>/etc/pam.conf</tt>, to -authenticate a user request via the locally available authentication -modules. The modules themselves will usually be located in the -directory <tt>/usr/lib/security</tt> and take the form of dynamically -loadable object files (see dlopen(3)). Alternatively, the modules can -be statically linked into the <bf/Linux-PAM/ library; this is mostly to -allow <bf/Linux-PAM/ to be used on platforms without dynamic linking -available, but the two forms can be used together. It is the -<bf/Linux-PAM/ interface that is called by an application and it is -the responsibility of the library to locate, load and call the -appropriate functions in a <bf/Linux-PAM/-module. - -<p> -Except for the immediate purpose of interacting with the user -(entering a password etc..) the module should never call the -application directly. This exception requires a "conversation -mechanism" which is documented below. - -<sect>What can be expected by the module - -<p> -Here we list the interface that the conventions that all -<bf/Linux-PAM/ modules must adhere to. - -<sect1>Getting and setting <tt/PAM_ITEM/s and <em/data/ - -<p> -First, we cover what the module should expect from the <bf/Linux-PAM/ -library and a <bf/Linux-PAM/ <em/aware/ application. Essesntially this -is the <tt/libpam.*/ library. - -<sect2> -Setting data - -<p> -Synopsis: -<tscreen> -<verb> -extern int pam_set_data(pam_handle_t *pamh, - const char *module_data_name, - void *data, - void (*cleanup)(pam_handle_t *pamh, - void *data, int error_status) ); -</verb> -</tscreen> - -<p> -The modules may be dynamically loadable objects. In general such files -should not contain <tt/static/ variables. This and the subsequent -function provide a mechanism for a module to associate some data with -the handle <tt/pamh/. Typically a module will call the -<tt/pam_set_data()/ function to register some data under a (hopefully) -unique <tt/module_data_name/. The data is available for use by other -modules too but <em/not/ by an application. - -<p> -The function <tt/cleanup()/ is associated with the <tt/data/ and, if -non-<tt/NULL/, it is called when this data is over-written or -following a call to <tt/pam_end()/ (see the Linux-PAM Application -Developers' Guide). - -<p> -The <tt/error_status/ argument is used to indicate to the module the -sort of action it is to take in cleaning this data item. As an -example, Kerberos creates a ticket file during the authentication -phase, this file might be associated with a data item. When -<tt/pam_end()/ is called by the module, the <tt/error_status/ -carries the return value of the <tt/pam_authenticate()/ or other -<tt/libpam/ function as appropriate. Based on this value the Kerberos -module may choose to delete the ticket file (<em/authentication -failure/) or leave it in place. - -<p> -The <tt/error_status/ may have been logically OR'd with either of the -following two values: - -<p> -<descrip> -<tag><tt/PAM_DATA_REPLACE/</tag> - When a data item is being replaced (through a second call to -<tt/pam_set_data()/) this mask is used. Otherwise, the call is assumed -to be from <tt/pam_end()/. - -<tag><tt/PAM_DATA_SILENT/</tag> - Which indicates that the process would prefer to perform the -<tt/cleanup()/ quietly. That is, discourages logging/messages to the -user. - -</descrip> - - -<sect2> -Getting data - -<p> -Synopsis: -<tscreen> -<verb> -extern int pam_get_data(const pam_handle_t *pamh, - const char *module_data_name, - const void **data); -</verb> -</tscreen> - -<p> -This function together with the previous one provides a method of -associating module-specific data with the handle <tt/pamh/. A -successful call to <tt/pam_get_data/ will result in <tt/*data/ -pointing to the data associated with the <tt/module_data_name/. Note, -this data is <em/not/ a copy and should be treated as <em/constant/ -by the module. - -<p> -Note, if there is an entry but it has the value <tt/NULL/, then this -call returns <tt/PAM_NO_MODULE_DATA/. - -<sect2> -Setting items - -<p> -Synopsis: -<tscreen> -<verb> -extern int pam_set_item(pam_handle_t *pamh, - int item_type, - const void *item); -</verb> -</tscreen> - -<p> -This function is used to (re)set the value of one of the -<tt/item_type/s. The reader is urged to read the entry for this -function in the <bf/Linux-PAM/ application developers' manual. - -<p> -In addition to the <tt/item/s listed there, the module can set the -following two <tt/item_type/s: - -<p> -<descrip> -<tag><tt/PAM_AUTHTOK/</tag> - -The authentication token (often a password). This token should be -ignored by all module functions besides <tt/pam_sm_authenticate()/ and -<tt/pam_sm_chauthtok()/. In the former function it is used to pass the -most recent authentication token from one stacked module to -another. In the latter function the token is used for another -purpose. It contains the currently active authentication token. - -<tag><tt/PAM_OLDAUTHTOK/</tag> - -The old authentication token. This token should be ignored by all -module functions except <tt/pam_sm_chauthtok()/. - -</descrip> - -<p> -Both of these items are reset before returning to the application. -When resetting these items, the <bf/Linux-PAM/ library first writes -<tt/0/'s to the current tokens and then <tt/free()/'s the associated -memory. - -<p> -The return values for this function are listed in the -<bf>Linux-PAM</bf> Application Developers' Guide. - -<sect2> -Getting items - -<p> -Synopsis: -<tscreen> -<verb> -extern int pam_get_item(const pam_handle_t *pamh, - int item_type, - const void **item); -</verb> -</tscreen> - -<p> -This function is used to obtain the value of the specified -<tt/item_type/. It is better documented in the <bf/Linux-PAM/ -Application Developers' Guide. However, there are three things worth -stressing here: -<itemize> - -<item> -Generally, if the module wishes to obtain the name of the user, it -should not use this function, but instead perform a call to -<tt/pam_get_user()/ (see section <ref id="pam-get-user" -name="below">). - -<item> -The module is additionally privileged to read the authentication -tokens, <tt/PAM_AUTHTOK/ and <tt/PAM_OLDAUTHTOK/ (see the section -above on <tt/pam_set_data()/). - -<item> -The module should <em/not/ <tt/free()/ or alter the data pointed to by -<tt/*item/ after a successful return from <tt/pam_get_item()/. This -pointer points directly at the data contained within the <tt/*pamh/ -structure. Should a module require that a change is made to the this -<tt/ITEM/ it should make the appropriate call to <tt/pam_set_item()/. -</itemize> - -<sect2>The <em/conversation/ mechanism - -<p> -Following the call <tt>pam_get_item(pamh,PAM_CONV,&item)</tt>, the -pointer <tt/item/ points to a structure containing an a pointer to a -<em/conversation/-function that provides limited but direct access to -the application. The purpose of this function is to allow the module -to prompt the user for their password and pass other information in a -manner consistent with the application. For example, an X-windows -based program might pop up a dialog box to report a login -failure. Just as the application should not be concerned with the -method of authentication, so the module should not dictate the manner -in which input (output) is obtained from (presented to) to the user. - -<p> -<bf>The reader is strongly urged to read the more complete description of -the <tt/pam_conv/ structure, written from the perspective of the -application developer, in the <bf/Linux-PAM/ Application Developers' -Guide.</bf> - -<p> -The return values for this function are listed in the -<bf>Linux-PAM</bf> Application Developers' Guide. - -<p> -The <tt/pam_response/ structure returned after a call to the -<tt/pam_conv/ function must be <tt/free()/'d by the module. Since the -call to the conversation function originates from the module, it is -clear that this <tt/pam_response/ structure could be either statically -or dynamically (using <tt/malloc()/ etc.) allocated within the -application. Repeated calls to the conversation function would likely -overwrite static memory, so it is required that for a successful -return from the conversation function the memory for the response -structure is dynamically allocated by the application with one of the -<tt/malloc()/ family of commands and <em/must/ be <tt/free()/'d by the -module. - -<p> -If the <tt/pam_conv/ mechanism is used to enter authentication tokens, -the module should either pass the result to the <tt/pam_set_item()/ -library function, or copy it itself. In such a case, once the token -has been stored (by one of these methods or another one), the memory -returned by the application should be overwritten with <tt/0/'s, and -then <tt/free()/'d. - -There is a handy macro <tt/_pam_drop_reply()/ to be found in -<tt><security/_pam_macros.h></tt> that can be used to -conveniently cleanup a <tt/pam_response/ structure. (Note, this -include file is specific to the Linux-PAM sources, and whilst it will -work with Sun derived PAM implementations, it is not generally -distributed by Sun.) - -<sect2>Getting the name of a user<label id="pam-get-user"> - -<p> -Synopsis: -<tscreen> -<verb> -extern int pam_get_user(pam_handle_t *pamh, - const char **user, - const char *prompt); -</verb> -</tscreen> - -<p> -This is a <bf/Linux-PAM/ library function that returns the -(prospective) name of the user. To determine the username it does the -following things, in this order: -<itemize> - -<item> checks what <tt/pam_get_item(pamh, PAM_USER, ... );/ would have -returned. If this is not <tt/NULL/ this is what it returns. Otherwise, - -<item> obtains a username from the application via the <tt/pam_conv/ -mechanism, it prompts the user with the first non-<tt/NULL/ string in -the following list: -<itemize> - -<item> The <tt/prompt/ argument passed to the function -<item> What is returned by <tt/pam_get_item(pamh,PAM_USER_PROMPT, ... );/ -<item> The default prompt: ``Please enter username: '' - -</itemize> -</itemize> - -<p> -By whatever means the username is obtained, a pointer to it is -returned as the contents of <tt/*user/. Note, this memory should -<em/not/ be <tt/free()/'d by the module. Instead, it will be liberated -on the next call to <tt/pam_get_user()/, or by <tt/pam_end()/ when the -application ends its interaction with <bf/Linux-PAM/. - -<p> -Also, in addition, it should be noted that this function sets the -<tt/PAM_USER/ item that is associated with the <tt/pam_[gs]et_item()/ -function. - -<p> -The return value of this function is one of the following: -<itemize> - -<item> <tt/PAM_SUCCESS/ - username obtained. - -<item> <tt/PAM_CONV_AGAIN/ - converstation did not complete and the -caller is required to return control to the application, until such -time as the application has completed the conversation process. A -module calling <tt/pam_get_user()/ that obtains this return code, -should return <tt/PAM_INCOMPLETE/ and be prepared (when invoked the -next time) to recall <tt/pam_get_user()/ to fill in the user's name, -and then pick up where it left off as if nothing had happened. This -procedure is needed to support an event-driven application programming -model. - -<item> <tt/PAM_CONV_ERR/ - the conversation method supplied by the -application failed to obtain the username. - -</itemize> - -<sect2>Setting a Linux-PAM environment variable - -<p> -Synopsis: -<tscreen> -<verb> -extern int pam_putenv(pam_handle_t *pamh, const char *name_value); -</verb> -</tscreen> - -<p> -<bf/Linux-PAM/ comes equipped with a series of functions for -maintaining a set of <em/environment/ variables. The environment is -initialized by the call to <tt/pam_start()/ and is <bf/erased/ with a -call to <tt/pam_end()/. This <em/environment/ is associated with the -<tt/pam_handle_t/ pointer returned by the former call. - -<p> -The default environment is all but empty. It contains a single -<tt/NULL/ pointer, which is always required to terminate the -variable-list. The <tt/pam_putenv()/ function can be used to add a -new environment variable, replace an existing one, or delete an old -one. - -<p> -<itemize> -<item>Adding/replacing a variable<newline> - -To add or overwrite a <bf/Linux-PAM/ environment variable the value of -the argument <tt/name_value/, should be of the following form: -<tscreen> -<verb> -name_value="VARIABLE=VALUE OF VARIABLE" -</verb> -</tscreen> -Here, <tt/VARIABLE/ is the environment variable's name and what -follows the `<tt/=/' is its (new) value. (Note, that <tt/"VARIABLE="/ -is a valid value for <tt/name_value/, indicating that the variable is -set to <tt/""/.) - -<item> Deleting a variable<newline> - -To delete a <bf/Linux-PAM/ environment variable the value of -the argument <tt/name_value/, should be of the following form: -<tscreen> -<verb> -name_value="VARIABLE" -</verb> -</tscreen> -Here, <tt/VARIABLE/ is the environment variable's name and the absence -of an `<tt/=/' indicates that the variable should be removed. - -</itemize> - -<p> -In all cases <tt/PAM_SUCCESS/ indicates success. - -<sect2>Getting a Linux-PAM environment variable - -<p> -Synopsis: -<tscreen> -<verb> -extern const char *pam_getenv(pam_handle_t *pamh, const char *name); -</verb> -</tscreen> - -<p> -This function can be used to return the value of the given -variable. If the returned value is <tt/NULL/, the variable is not -known. - -<sect2>Listing the Linux-PAM environment - -<p> -Synopsis: -<tscreen> -<verb> -extern char * const *pam_getenvlist(pam_handle_t *pamh); -</verb> -</tscreen> - -<p> -This function returns a pointer to the entire <bf/Linux-PAM/ -environment array. At first sight the <em/type/ of the returned data -may appear a little confusing. It is basically a <em/read-only/ array -of character pointers, that lists the <tt/NULL/ terminated list of -environment variables set so far. - -<p> -Although, this is not a concern for the module programmer, we mention -here that an application should be careful to copy this entire array -before executing <tt/pam_end()/ otherwise all the variable information -will be lost. (There are functions in <tt/libpam_misc/ for this -purpose: <tt/pam_misc_copy_env()/ and <tt/pam_misc_drop_env()/.) - -<sect1>Other functions provided by <tt/libpam/ - -<sect2>Understanding errors - -<p> -<itemize> - -<item> -<tt>extern const char *pam_strerror(pam_handle_t *pamh, int errnum);</tt> - -<p> -This function returns some text describing the <bf/Linux-PAM/ error -associated with the argument <tt/errnum/. If the error is not -recognized <tt/``Unknown Linux-PAM error''/ is returned. - -</itemize> - -<sect2>Planning for delays - -<p> -<itemize> - -<item> -<tt>extern int pam_fail_delay(pam_handle_t *pamh, unsigned int -micro_sec)</tt> - -<p> -This function is offered by <bf/Linux-PAM/ to facilitate time delays -following a failed call to <tt/pam_authenticate()/ and before control -is returned to the application. When using this function the module -programmer should check if it is available with, -<tscreen> -<verb> -#ifdef PAM_FAIL_DELAY - .... -#endif /* PAM_FAIL_DELAY */ -</verb> -</tscreen> - -<p> -Generally, an application requests that a user is authenticated by -<bf/Linux-PAM/ through a call to <tt/pam_authenticate()/ or -<tt/pam_chauthtok()/. These functions call each of the <em/stacked/ -authentication modules listed in the <bf/Linux-PAM/ configuration -file. As directed by this file, one of more of the modules may fail -causing the <tt/pam_...()/ call to return an error. It is desirable -for there to also be a pause before the application continues. The -principal reason for such a delay is security: a delay acts to -discourage <em/brute force/ dictionary attacks primarily, but also -helps hinder <em/timed/ (cf. covert channel) attacks. - -<p> -The <tt/pam_fail_delay()/ function provides the mechanism by which an -application or module can suggest a minimum delay (of <tt/micro_sec/ -<em/micro-seconds/). <bf/Linux-PAM/ keeps a record of the longest time -requested with this function. Should <tt/pam_authenticate()/ fail, -the failing return to the application is delayed by an amount of time -randomly distributed (by up to 25%) about this longest value. - -<p> -Independent of success, the delay time is reset to its zero default -value when <bf/Linux-PAM/ returns control to the application. - -</itemize> - -<sect>What is expected of a module - -<p> -The module must supply a sub-set of the six functions listed -below. Together they define the function of a <bf/Linux-PAM -module/. Module developers are strongly urged to read the comments on -security that follow this list. - -<sect1> Overview - -<p> -The six module functions are grouped into four independent management -groups. These groups are as follows: <em/authentication/, -<em/account/, <em/session/ and <em/password/. To be properly defined, -a module must define all functions within at least one of these -groups. A single module may contain the necessary functions for -<em/all/ four groups. - -<sect2> Functional independence - -<p> -The independence of the four groups of service a module can offer -means that the module should allow for the possibility that any one of -these four services may legitimately be called in any order. Thus, the -module writer should consider the appropriateness of performing a -service without the prior success of some other part of the module. - -<p> -As an informative example, consider the possibility that an -application applies to change a user's authentication token, without -having first requested that <bf/Linux-PAM/ authenticate the user. In -some cases this may be deemed appropriate: when <tt/root/ wants to -change the authentication token of some lesser user. In other cases it -may not be appropriate: when <tt/joe/ maliciously wants to reset -<tt/alice/'s password; or when anyone other than the user themself -wishes to reset their <em/KERBEROS/ authentication token. A policy for -this action should be defined by any reasonable authentication scheme, -the module writer should consider this when implementing a given -module. - -<sect2> Minimizing administration problems - -<p> -To avoid system administration problems and the poor construction of a -<tt>/etc/pam.conf</tt> file, the module developer may define all -six of the following functions. For those functions that would not be -called, the module should return <tt/PAM_SERVICE_ERR/ and write an -appropriate message to the system log. When this action is deemed -inappropriate, the function would simply return <tt/PAM_IGNORE/. - -<sect2> Arguments supplied to the module - -<p> -The <tt/flags/ argument of each of the following functions can be -logically OR'd with <tt/PAM_SILENT/, which is used to inform the -module to not pass any <em/text/ (errors or warnings) to the -application. - -<p> -The <tt/argc/ and <tt/argv/ arguments are taken from the line -appropriate to this module---that is, with the <em/service_name/ -matching that of the application---in the configuration file (see the -<bf/Linux-PAM/ System Administrators' Guide). Together these two -parameters provide the number of arguments and an array of pointers to -the individual argument tokens. This will be familiar to C programmers -as the ubiquitous method of passing command arguments to the function -<tt/main()/. Note, however, that the first argument (<tt/argv[0]/) is -a true argument and <bf/not/ the name of the module. - -<sect1> Authentication management - -<p> -To be correctly initialized, <tt/PAM_SM_AUTH/ must be <tt/#define/'d -prior to including <tt><security/pam_modules.h></tt>. This will -ensure that the prototypes for static modules are properly declared. - -<p> -<itemize> - -<item> -<tt>PAM_EXTERN int pam_sm_authenticate(pam_handle_t *pamh, int flags, -int argc, const char **argv);</tt> - -<p> -This function performs the task of authenticating the user. - -<p> -The <tt/flags/ argument can be a logically OR'd with <tt/PAM_SILENT/ -and optionally take the following value: - -<p><descrip> -<tag><tt/PAM_DISALLOW_NULL_AUTHTOK/</tag> - return <tt/PAM_AUTH_ERR/ if the database of authentication -tokens for this authentication mechanism has a <tt/NULL/ entry for the -user. Without this flag, such a <tt/NULL/ token will lead to a success -without the user being prompted. -</descrip> - -<p> -Besides <tt/PAM_SUCCESS/ return values that can be sent by this -function are one of the following: - -<descrip> - -<tag><tt/PAM_AUTH_ERR/</tag> - The user was not authenticated -<tag><tt/PAM_CRED_INSUFFICIENT/</tag> - For some reason the application does not have sufficient -credentials to authenticate the user. -<tag><tt/PAM_AUTHINFO_UNAVAIL/</tag> - The modules were not able to access the authentication -information. This might be due to a network or hardware failure etc. -<tag><tt/PAM_USER_UNKNOWN/</tag> - The supplied username is not known to the authentication -service -<tag><tt/PAM_MAXTRIES/</tag> - One or more of the authentication modules has reached its -limit of tries authenticating the user. Do not try again. - -</descrip> - -<item> -<tt>PAM_EXTERN int pam_sm_setcred(pam_handle_t *pamh, int flags, int -argc, const char **argv);</tt> - -<p> -This function performs the task of altering the credentials of the -user with respect to the corresponding authorization -scheme. Generally, an authentication module may have access to more -information about a user than their authentication token. This -function is used to make such information available to the -application. It should only be called <em/after/ the user has been -authenticated but before a session has been established. - -<p> -Permitted flags, one of which, may be logically OR'd with -<tt/PAM_SILENT/ are, - -<p><descrip> -<tag><tt/PAM_ESTABLISH_CRED/</tag> - Set the credentials for the authentication service, -<tag><tt/PAM_DELETE_CRED/</tag> - Delete the credentials associated with the authentication service, -<tag><tt/PAM_REINITIALIZE_CRED/</tag> - Reinitialize the user credentials, and -<tag><tt/PAM_REFRESH_CRED/</tag> - Extend the lifetime of the user credentials. -</descrip> - -<p> -Prior to <bf/Linux-PAM-0.75/, and due to a deficiency with the way the -<tt/auth/ stack was handled in the case of the setcred stack being -processed, the module was required to attempt to return the same error -code as <tt/pam_sm_authenticate/ did. This was necessary to preserve -the logic followed by libpam as it executes the stack of -<em/authentication/ modules, when the application called either -<tt/pam_authenticate()/ or <tt/pam_setcred()/. Failing to do this, -led to confusion on the part of the System Administrator. - -<p> -For <bf/Linux-PAM-0.75/ and later, libpam handles the credential stack -much more sanely. The way the <tt/auth/ stack is navigated in order to -evaluate the <tt/pam_setcred()/ function call, independent of the -<tt/pam_sm_setcred()/ return codes, is exactly the same way that it -was navigated when evaluating the <tt/pam_authenticate()/ library -call. Typically, if a stack entry was ignored in evaluating -<tt/pam_authenticate()/, it will be ignored when libpam evaluates the -<tt/pam_setcred()/ function call. Otherwise, the return codes from -each module specific <tt/pam_sm_setcred()/ call are treated as -<tt/required/. - -<p> -Besides <tt/PAM_SUCCESS/, the module may return one of the following -errors: - -<p><descrip> -<tag><tt/PAM_CRED_UNAVAIL/</tag> - This module cannot retrieve the user's credentials. -<tag><tt/PAM_CRED_EXPIRED/</tag> - The user's credentials have expired. -<tag><tt/PAM_USER_UNKNOWN/</tag> - The user is not known to this authentication module. -<tag><tt/PAM_CRED_ERR/</tag> - This module was unable to set the credentials of the user. -</descrip> - -<p> -these, non-<tt/PAM_SUCCESS/, return values will typically lead to the -credential stack <em/failing/. The first such error will dominate in -the return value of <tt/pam_setcred()/. - -</itemize> - -<sect1> Account management - -<p> -To be correctly initialized, <tt/PAM_SM_ACCOUNT/ must be -<tt/#define/'d prior to including <tt><security/pam_modules.h></tt>. -This will ensure that the prototype for a static module is properly -declared. - -<p> -<itemize> - -<item> -<tt>PAM_EXTERN int pam_sm_acct_mgmt(pam_handle_t *pamh, int flags, int -argc, const char **argv);</tt> - -<p> -This function performs the task of establishing whether the user is -permitted to gain access at this time. It should be understood that -the user has previously been validated by an authentication -module. This function checks for other things. Such things might be: -the time of day or the date, the terminal line, remote -hostname, etc. . - -<p> -This function may also determine things like the expiration on -passwords, and respond that the user change it before continuing. - -<p> -Valid flags, which may be logically OR'd with <tt/PAM_SILENT/, are the -same as those applicable to the <tt/flags/ argument of -<tt/pam_sm_authenticate/. - -<p> -This function may return one of the following errors, - -<descrip> - -<tag><tt/PAM_ACCT_EXPIRED/</tag> - The user is no longer permitted access to the system. -<tag><tt/PAM_AUTH_ERR/</tag> - There was an authentication error. -<tag><tt/PAM_NEW_AUTHTOKEN_REQD/</tag> - The user's authentication token has expired. Before calling -this function again the application will arrange for a new one to be -given. This will likely result in a call to <tt/pam_sm_chauthtok()/. -<tag><tt/PAM_USER_UNKNOWN/</tag> - The user is not known to the module's account management -component. - -</descrip> - -</itemize> - -<sect1> Session management - -<p> -To be correctly initialized, <tt/PAM_SM_SESSION/ must be -<tt/#define/'d prior to including -<tt><security/pam_modules.h></tt>. This will ensure that the -prototypes for static modules are properly declared. - -<p> -The following two functions are defined to handle the -initialization/termination of a session. For example, at the beginning -of a session the module may wish to log a message with the system -regarding the user. Similarly, at the end of the session the module -would inform the system that the user's session has ended. - -<p> -It should be possible for sessions to be opened by one application and -closed by another. This either requires that the module uses only -information obtained from <tt/pam_get_item()/, or that information -regarding the session is stored in some way by the operating system -(in a file for example). - -<p> -<itemize> - -<item> -<tt>PAM_EXTERN int pam_sm_open_session(pam_handle_t *pamh, int flags, int -argc, const char **argv);</tt> - -<p> -This function is called to commence a session. The only valid, but -optional, flag is <tt/PAM_SILENT/. - -<p> -As a return value, <tt/PAM_SUCCESS/ signals success and -<tt/PAM_SESSION_ERR/ failure. - -<item> -<tt>PAM_EXTERN int pam_sm_close_session(pam_handle_t *pamh, int flags, int -argc, const char **argv);</tt> - -<p> -This function is called to terminate a session. The only valid, but -optional, flag is <tt/PAM_SILENT/. - -<p> -As a return value, <tt/PAM_SUCCESS/ signals success and -<tt/PAM_SESSION_ERR/ failure. - -</itemize> - -<sect1> Password management - -<p> -To be correctly initialized, <tt/PAM_SM_PASSWORD/ must be -<tt/#define/'d prior to including <tt><security/pam_modules.h></tt>. -This will ensure that the prototype for a static module is properly -declared. - -<p> -<itemize> - -<item> -<tt>PAM_EXTERN int pam_sm_chauthtok(pam_handle_t *pamh, int flags, int -argc, const char **argv);</tt> - -<p> -This function is used to (re-)set the authentication token of the -user. A valid flag, which may be logically OR'd with <tt/PAM_SILENT/, -can be built from the following list, - -<descrip> -<tag><tt/PAM_CHANGE_EXPIRED_AUTHTOK/</tag> - This argument indicates to the module that the users -authentication token (password) should only be changed if it has -expired. This flag is optional and <em/must/ be combined with one of -the following two flags. Note, however, the following two options are -<em/mutually exclusive/. - -<tag><tt/PAM_PRELIM_CHECK/</tag> - This indicates that the modules are being probed as to their -ready status for altering the user's authentication token. If the -module requires access to another system over some network it should -attempt to verify it can connect to this system on receiving this -flag. If a module cannot establish it is ready to update the user's -authentication token it should return <tt/PAM_TRY_AGAIN/, this -information will be passed back to the application. - -<tag><tt/PAM_UPDATE_AUTHTOK/</tag> - This informs the module that this is the call it should change -the authorization tokens. If the flag is logically OR'd with -<tt/PAM_CHANGE_EXPIRED_AUTHTOK/, the token is only changed if it has -actually expired. - -</descrip> - -<p> -Note, the <bf/Linux-PAM/ library calls this function twice in -succession. The first time with <tt/PAM_PRELIM_CHECK/ and then, if the -module does not return <tt/PAM_TRY_AGAIN/, subsequently with -<tt/PAM_UPDATE_AUTHTOK/. It is only on the second call that the -authorization token is (possibly) changed. - -<p> -<tt/PAM_SUCCESS/ is the only successful return value, valid -error-returns are: - -<descrip> -<tag><tt/PAM_AUTHTOK_ERR/</tag> - The module was unable to obtain the new authentication token. - -<tag><tt/PAM_AUTHTOK_RECOVERY_ERR/</tag> - The module was unable to obtain the old authentication token. - -<tag><tt/PAM_AUTHTOK_LOCK_BUSY/</tag> - Cannot change the authentication token since it is currently -locked. - -<tag><tt/PAM_AUTHTOK_DISABLE_AGING/</tag> - Authentication token aging has been disabled. - -<tag><tt/PAM_PERM_DENIED/</tag> - Permission denied. - -<tag><tt/PAM_TRY_AGAIN/</tag> - Preliminary check was unsuccessful. Signals an immediate return -to the application is desired. - -<tag><tt/PAM_USER_UNKNOWN/</tag> - The user is not known to the authentication token changing -service. - -</descrip> - -</itemize> - -<sect>Generic optional arguments - -<p> -Here we list the generic arguments that all modules can expect to -be passed. They are not mandatory, and their absence should be -accepted without comment by the module. - -<p> -<descrip> -<tag><tt/debug/</tag> - -Use the <tt/syslog(3)/ call to log debugging information to the system -log files. - -<tag><tt/no_warn/</tag> - -Instruct module to not give warning messages to the application. - -<tag><tt/use_first_pass/</tag> - -The module should not prompt the user for a password. Instead, it -should obtain the previously typed password (by a call to -<tt/pam_get_item()/ for the <tt/PAM_AUTHTOK/ item), and use that. If -that doesn't work, then the user will not be authenticated. (This -option is intended for <tt/auth/ and <tt/passwd/ modules only). - -<tag><tt/try_first_pass/</tag> - -The module should attempt authentication with the previously typed -password (by a call to <tt/pam_get_item()/ for the <tt/PAM_AUTHTOK/ -item). If that doesn't work, then the user is prompted for a -password. (This option is intended for <tt/auth/ modules only). - -<tag><tt/use_mapped_pass/</tag> - -<bf/WARNING:/ coding this functionality may cause the module writer to -break <em/local/ encryption laws. For example, in the U.S. there are -restrictions on the export computer code that is capable of strong -encryption. It has not been established whether this option is -affected by this law, but one might reasonably assume that it does -until told otherwise. For this reason, this option is not supported -by any of the modules distributed with <bf/Linux-PAM/. - -The intended function of this argument, however, is that the module -should take the existing authentication token from a previously -invoked module and use it as a key to retrieve the authentication -token for this module. For example, the module might create a strong -hash of the <tt/PAM_AUTHTOK/ item (established by a previously -executed module). Then, with logical-exclusive-or, use the result as a -<em/key/ to safely store/retrieve the authentication token for this -module in/from a local file <em/etc/. . - -<tag><tt/expose_account/</tag> - -<p> -In general the leakage of some information about user accounts is not -a secure policy for modules to adopt. Sometimes information such as -users names or home directories, or preferred shell, can be used to -attack a user's account. In some circumstances, however, this sort of -information is not deemed a threat: displaying a user's full name when -asking them for a password in a secured environment could also be -called being 'friendly'. The <tt/expose_account/ argument is a -standard module argument to encourage a module to be less discrete -about account information as it is deemed appropriate by the local -administrator. - -</descrip> - -<sect>Programming notes - -<p> -Here we collect some pointers for the module writer to bear in mind -when writing/developing a <bf/Linux-PAM/ compatible module. - -<sect1>Security issues for module creation - -<sect2>Sufficient resources - -<p> -Care should be taken to ensure that the proper execution of a module -is not compromised by a lack of system resources. If a module is -unable to open sufficient files to perform its task, it should fail -gracefully, or request additional resources. Specifically, the -quantities manipulated by the <tt/setrlimit(2)/ family of commands -should be taken into consideration. - -<sect2>Who's who? - -<p> -Generally, the module may wish to establish the identity of the user -requesting a service. This may not be the same as the username -returned by <tt/pam_get_user()/. Indeed, that is only going to be the -name of the user under whose identity the service will be given. This -is not necessarily the user that requests the service. - -<p> -In other words, user X runs a program that is setuid-Y, it grants the -user to have the permissions of Z. A specific example of this sort of -service request is the <em/su/ program: user <tt/joe/ executes -<em/su/ to become the user <em/jane/. In this situation X=<tt/joe/, -Y=<tt/root/ and Z=<tt/jane/. Clearly, it is important that the module -does not confuse these different users and grant an inappropriate -level of privilege. - -<p> -The following is the convention to be adhered to when juggling -user-identities. - -<p> -<itemize> -<item>X, the identity of the user invoking the service request. -This is the user identifier; returned by the function <tt/getuid(2)/. - -<item>Y, the privileged identity of the application used to grant the -requested service. This is the <em/effective/ user identifier; -returned by the function <tt/geteuid(2)/. - -<item>Z, the user under whose identity the service will be granted. -This is the username returned by <tt/pam_get_user(2)/ and also stored -in the <bf/Linux-PAM/ item, <tt/PAM_USER/. - -<item><bf/Linux-PAM/ has a place for an additional user identity that -a module may care to make use of. This is the <tt/PAM_RUSER/ item. -Generally, network sensitive modules/applications may wish to set/read -this item to establish the identity of the user requesting a service -from a remote location. - -</itemize> - -<p> -Note, if a module wishes to modify the identity of either the <tt/uid/ -or <tt/euid/ of the running process, it should take care to restore -the original values prior to returning control to the <bf/Linux-PAM/ -library. - -<sect2>Using the conversation function -<p> -Prior to calling the conversation function, the module should reset -the contents of the pointer that will return the applications -response. This is a good idea since the application may fail to fill -the pointer and the module should be in a position to notice! - -<p> -The module should be prepared for a failure from the conversation. The -generic error would be <tt/PAM_CONV_ERR/, but anything other than -<tt/PAM_SUCCESS/ should be treated as indicating failure. - -<sect2>Authentication tokens - -<p> -To ensure that the authentication tokens are not left lying around the -items, <tt/PAM_AUTHTOK/ and <tt/PAM_OLDAUTHTOK/, are not available to -the application: they are defined in -<tt><security/pam_modules.h></tt>. This is ostensibly for -security reasons, but a maliciously programmed application will always -have access to all memory of the process, so it is only superficially -enforced. As a general rule the module should overwrite -authentication tokens as soon as they are no longer needed. -Especially before <tt/free()/'ing them. The <bf/Linux-PAM/ library is -required to do this when either of these authentication token items -are (re)set. - -<p> -Not to dwell too little on this concern; should the module store the -authentication tokens either as (automatic) function variables or -using <tt/pam_[gs]et_data()/ the associated memory should be -over-written explicitly before it is released. In the case of the -latter storage mechanism, the associated <tt/cleanup()/ function -should explicitly overwrite the <tt/*data/ before <tt/free()/'ing it: -for example, - -<tscreen> -<verb> -/* - * An example cleanup() function for releasing memory that was used to - * store a password. - */ - -int cleanup(pam_handle_t *pamh, void *data, int error_status) -{ - char *xx; - - if ((xx = data)) { - while (*xx) - *xx++ = '\0'; - free(data); - } - return PAM_SUCCESS; -} -</verb> -</tscreen> - -<sect1>Use of <tt/syslog(3)/ - -<p> -Only rarely should error information be directed to the user. Usually, -this is to be limited to ``<em/sorry you cannot login now/'' type -messages. Information concerning errors in the configuration file, -<tt>/etc/pam.conf</tt>, or due to some system failure encountered by -the module, should be written to <tt/syslog(3)/ with -<em/facility-type/ <tt/LOG_AUTHPRIV/. - -<p> -With a few exceptions, the level of logging is, at the discretion of -the module developer. Here is the recommended usage of different -logging levels: - -<p> -<itemize> - -<item> -As a general rule, errors encountered by a module should be logged at -the <tt/LOG_ERR/ level. However, information regarding an unrecognized -argument, passed to a module from an entry in the -<tt>/etc/pam.conf</tt> file, is <bf/required/ to be logged at the -<tt/LOG_ERR/ level. - -<item> -Debugging information, as activated by the <tt/debug/ argument to the -module in <tt>/etc/pam.conf</tt>, should be logged at the -<tt/LOG_DEBUG/ level. - -<item> -If a module discovers that its personal configuration file or some -system file it uses for information is corrupted or somehow unusable, -it should indicate this by logging messages at level, <tt/LOG_ALERT/. - -<item> -Shortages of system resources, such as a failure to manipulate a file -or <tt/malloc()/ failures should be logged at level <tt/LOG_CRIT/. - -<item> -Authentication failures, associated with an incorrectly typed password -should be logged at level, <tt/LOG_NOTICE/. - -</itemize> - -<sect1> Modules that require system libraries - -<p> -Writing a module is much like writing an application. You have to -provide the "conventional hooks" for it to work correctly, like -<tt>pam_sm_authenticate()</tt> etc., which would correspond to the -<tt/main()/ function in a normal function. - -<p> -Typically, the author may want to link against some standard system -libraries. As when one compiles a normal program, this can be done for -modules too: you simply append the <tt>-l</tt><em>XXX</em> arguments -for the desired libraries when you create the shared module object. To -make sure a module is linked to the <tt>lib<em>whatever</em>.so</tt> -library when it is <tt>dlopen()</tt>ed, try: -<tscreen> -<verb> -% gcc -shared -Xlinker -x -o pam_module.so pam_module.o -lwhatever -</verb> -</tscreen> - -<sect1> Added requirements for <em/statically/ loaded modules. - -<!-- - Copyright (C) Michael K. Johnson 1996. - Last modified: AGM 1996/5/31. - --> - -<p> -Modules may be statically linked into libpam. This should be true of -all the modules distributed with the basic <bf/Linux-PAM/ -distribution. To be statically linked, a module needs to export -information about the functions it contains in a manner that does not -clash with other modules. - -The extra code necessary to build a static module should be delimited -with <tt/#ifdef PAM_STATIC/ and <tt/#endif/. The static code should do -the following: -<itemize> -<item> Define a single structure, <tt/struct pam_module/, called -<tt>_pam_<it>modname</it>_modstruct</tt>, where -<tt><it>modname</it></tt> is the name of the module <bf/as used in the -filesystem/ but without the leading directory name (generally -<tt>/usr/lib/security/</tt> or the suffix (generally <tt/.so/). - -</itemize> - -<p> -As a simple example, consider the following module code which defines -a module that can be compiled to be <em/static/ or <em/dynamic/: - -<p> -<tscreen> -<verb> -#include <stdio.h> /* for NULL define */ - -#define PAM_SM_PASSWORD /* the only pam_sm_... function declared */ -#include <security/pam_modules.h> - -PAM_EXTERN int pam_sm_chauthtok(pam_handle_t *pamh, int flags, - int argc, const char **argv) -{ - return PAM_SUCCESS; -} - -#ifdef PAM_STATIC /* for the case that this module is static */ - -struct pam_module _pam_modname_modstruct = { /* static module data */ - "pam_modname", - NULL, - NULL, - NULL, - NULL, - NULL, - pam_sm_chauthtok, -}; - -#endif /* end PAM_STATIC */ -</verb> -</tscreen> - -<p> -To be linked with <em/libpam/, staticly-linked modules must be built -from within the <tt>Linux-PAM-X.YY/modules/</tt> subdirectory of the -<bf/Linux-PAM/ source directory as part of a normal build of the -<bf/Linux-PAM/ system. - -The <em/Makefile/, for the module in question, must execute the -<tt/register_static/ shell script that is located in the -<tt>Linux-PAM-X.YY/modules/</tt> subdirectory. This is to ensure that -the module is properly registered with <em/libpam/. - -The <bf/two/ manditory arguments to <tt/register_static/ are the -title, and the pathname of the object file containing the module's -code. The pathname is specified relative to the -<tt>Linux-PAM-X.YY/modules</tt> directory. The pathname may be an -empty string---this is for the case that a single object file needs to -register more than one <tt/struct pam_module/. In such a case, exactly -one call to <tt/register_static/ must indicate the object file. - -<p> -Here is an example; a line in the <em/Makefile/ might look like this: -<tscreen> -<verb> -register: -ifdef STATIC - (cd ..; ./register_static pam_modname pam_modname/pam_modname.o) -endif -</verb> -</tscreen> - -For some further examples, see the <tt>modules</tt> subdirectory of -the current <bf/Linux-PAM/ distribution. - -<sect>An example module file - -<p> -At some point, we may include a fully commented example of a module in -this document. For now, we point the reader to these two locations in -the public CVS repository: -<itemize> -<item> A module that always succeeds: <tt><htmlurl -url="http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/pam/Linux-PAM/modules/pam_permit/" -name="http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/pam/Linux-PAM/modules/pam_permit/" -></tt> -<item> A module that always fails: <tt><htmlurl -url="http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/pam/Linux-PAM/modules/pam_deny/" -name="http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/pam/Linux-PAM/modules/pam_deny/" -></tt> -</itemize> - -<sect>Files - -<p><descrip> - -<tag><tt>/usr/lib/libpam.so.*</tt></tag> - -the shared library providing applications with access to -<bf/Linux-PAM/. - -<tag><tt>/etc/pam.conf</tt></tag> - -the <bf/Linux-PAM/ configuration file. - -<tag><tt>/usr/lib/security/pam_*.so</tt></tag> - -the primary location for <bf/Linux-PAM/ dynamically loadable object -files; the modules. - -</descrip> - -<sect>See also - -<p><itemize> -<item>The <bf/Linux-PAM/ System Administrators' Guide. -<item>The <bf/Linux-PAM/ Application Writers' Guide. -<item> -V. Samar and R. Schemers (SunSoft), ``UNIFIED LOGIN WITH PLUGGABLE -AUTHENTICATION MODULES'', Open Software Foundation Request For -Comments 86.0, October 1995. -</itemize> - -<sect>Notes - -<p> -I intend to put development comments here... like ``at the moment -this isn't actually supported''. At release time what ever is in -this section will be placed in the Bugs section below! :) - -<p> -<itemize> -<item> -Perhaps we should keep a registry of data-names as used by -<tt/pam_[gs]et_data()/ so there are no unintentional problems due to -conflicts? - -<item> -<tt/pam_strerror()/ should be internationalized.... - -<item> -There has been some debate about whether <tt/initgroups()/ should be -in an application or in a module. It was settled by Sun who stated -that initgroups is an action of the <em/application/. The modules are -permitted to add additional groups, however. - -<item> -Refinements/futher suggestions to <tt/syslog(3)/ usage by modules are -needed. - -</itemize> - -<sect>Author/acknowledgments - -<p> -This document was written by Andrew G. Morgan -(<tt/morgan@kernel.org/) with many contributions from -<!-- insert credits here --> -<!-- - an sgml list of people to credit for their contributions to Linux-PAM - $Id$ - --> -Chris Adams, -Peter Allgeyer, -Tim Baverstock, -Tim Berger, -Craig S. Bell, -Derrick J. Brashear, -Ben Buxton, -Seth Chaiklin, -Oliver Crow, -Chris Dent, -Marc Ewing, -Cristian Gafton, -Emmanuel Galanos, -Brad M. Garcia, -Eric Hester, -Roger Hu, -Eric Jacksch, -Michael K. Johnson, -David Kinchlea, -Olaf Kirch, -Marcin Korzonek, -Stephen Langasek, -Nicolai Langfeldt, -Elliot Lee, -Luke Kenneth Casson Leighton, -Al Longyear, -Ingo Luetkebohle, -Marek Michalkiewicz, -Robert Milkowski, -Aleph One, -Martin Pool, -Sean Reifschneider, -Jan Rekorajski, -Erik Troan, -Theodore Ts'o, -Jeff Uphoff, -Myles Uyema, -Savochkin Andrey Vladimirovich, -Ronald Wahl, -David Wood, -John Wilmes, -Joseph S. D. Yao -and -Alex O. Yuriev. - -<p> -Thanks are also due to Sun Microsystems, especially to Vipin Samar and -Charlie Lai for their advice. At an early stage in the development of -<bf/Linux-PAM/, Sun graciously made the documentation for their -implementation of PAM available. This act greatly accelerated the -development of <bf/Linux-PAM/. - -<sect>Bugs/omissions - -<p> -Few PAM modules currently exist. Few PAM-aware applications exist. -This document is hopelessly unfinished. Only a partial list of people is -credited for all the good work they have done. - -<sect>Copyright information for this document - -<p> -Copyright (c) Andrew G. Morgan 1996-2002. All rights reserved. -<newline> -Email: <tt><morgan@kernel.org></tt> - -<p> -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are -met: - -<p> -<itemize> - -<item> -1. Redistributions of source code must retain the above copyright - notice, and the entire permission notice in its entirety, - including the disclaimer of warranties. - -<item> -2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - -<item> -3. The name of the author may not be used to endorse or promote - products derived from this software without specific prior - written permission. - -</itemize> - -<p> -<bf/Alternatively/, this product may be distributed under the terms of -the GNU General Public License (GPL), in which case the provisions of -the GNU GPL are required <bf/instead of/ the above restrictions. -(This clause is necessary due to a potential bad interaction between -the GNU GPL and the restrictions contained in a BSD-style copyright.) - -<p> -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR -TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -DAMAGE. - -<p> -<tt>$Id$</tt> - -</article> diff --git a/doc/pam_source.sgml b/doc/pam_source.sgml deleted file mode 100644 index bc091ed6..00000000 --- a/doc/pam_source.sgml +++ /dev/null @@ -1,1152 +0,0 @@ -<!doctype linuxdoc system> - -<!-- - - $Id$ - - Copyright (c) Andrew G. Morgan 1996-2002. All rights reserved. - -Redistribution and use in source (sgml) and binary (derived) forms, -with or without modification, are permitted provided that the -following conditions are met: - -1. Redistributions of source code must retain the above copyright - notice, and the entire permission notice in its entirety, - including the disclaimer of warranties. - -2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - -3. The name of the author may not be used to endorse or promote - products derived from this software without specific prior - written permission. - -ALTERNATIVELY, this product may be distributed under the terms of the -GNU General Public License, in which case the provisions of the GNU -GPL are required INSTEAD OF the above restrictions. (This clause is -necessary due to a potential bad interaction between the GNU GPL and -the restrictions contained in a BSD-style copyright.) - -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR -TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -DAMAGE. - - --> - -<article> - -<title>The Linux-PAM System Administrators' Guide -<author>Andrew G. Morgan, <tt>morgan@kernel.org</tt> -<date>DRAFT v0.77 2002/07/10 -<abstract> -This manual documents what a system-administrator needs to know about -the <bf>Linux-PAM</bf> library. It covers the correct syntax of the -PAM configuration file and discusses strategies for maintaining a -secure system. -</abstract> - -<!-- Table of contents --> -<toc> - -<!-- Begin the document --> - -<sect>Introduction - -<p><bf/Linux-PAM/ (Pluggable Authentication Modules for Linux) is a -suite of shared libraries that enable the local system administrator -to choose how applications authenticate users. - -<p>In other words, without (rewriting and) recompiling a PAM-aware -application, it is possible to switch between the authentication -mechanism(s) it uses. Indeed, one may entirely upgrade the local -authentication system without touching the applications themselves. - -<p>Historically an application that has required a given user to be -authenticated, has had to be compiled to use a specific authentication -mechanism. For example, in the case of traditional UN*X systems, the -identity of the user is verified by the user entering a correct -password. This password, after being prefixed by a two character -``salt'', is encrypted (with crypt(3)). The user is then authenticated -if this encrypted password is identical to the second field of the -user's entry in the system password database (the <tt>/etc/passwd</tt> -file). On such systems, most if not all forms of privileges are -granted based on this single authentication scheme. Privilege comes in -the form of a personal user-identifier (<tt/uid/) and membership of -various groups. Services and applications are available based on the -personal and group identity of the user. Traditionally, group -membership has been assigned based on entries in the -<tt>/etc/group</tt> file. - -<p> -Unfortunately, increases in the speed of computers and the -widespread introduction of network based computing, have made once -secure authentication mechanisms, such as this, vulnerable to -attack. In the light of such realities, new methods of authentication -are continuously being developed. - -<p> -It is the purpose of the <bf/Linux-PAM/ project to separate the -development of privilege granting software from the development of -secure and appropriate authentication schemes. This is accomplished -by providing a library of functions that an application may use to -request that a user be authenticated. This PAM library is configured -locally with a system file, <tt>/etc/pam.conf</tt> (or a series of -configuration files located in <tt>/etc/pam.d/</tt>) to authenticate a -user request via the locally available authentication modules. The -modules themselves will usually be located in the directory -<tt>/lib/security</tt> and take the form of dynamically loadable -object files (see <tt/dlopen(3)/). - -<sect>Some comments on the text<label id="text-conventions"> - -<p> -Before proceeding to read the rest of this document, it should be -noted that the text assumes that certain files are placed in certain -directories. Where they have been specified, the conventions we adopt -here for locating these files are those of the relevant RFC (RFC-86.0, -see <ref id="see-also-sec" name="bibliography">). If you are using a -distribution of Linux (or some other operating system) that supports -PAM but chooses to distribute these files in a diferent way you should -be careful when copying examples directly from the text. - -<p> -As an example of the above, where it is explicit, the text assumes -that PAM loadable object files (the <em/modules/) are to be located in -the following directory: <tt>/lib/security/</tt>. This is generally -the location that seems to be compatible with the Linux File System -Standard (the FSSTND). On Solaris, which has its own licensed version -of PAM, and some other implementations of UN*X, these files can be -found in <tt>/usr/lib/security</tt>. Please be careful to perform the -necessary transcription when using the examples from the text. - -<sect>Overview<label id="overview-section"> - -<p> -For the uninitiated, we begin by considering an example. We take an -application that grants some service to users; <em/login/ is one such -program. <em/Login/ does two things, it first establishes that the -requesting user is whom they claim to be and second provides them with -the requested service: in the case of <em/login/ the service is a -command shell (<em>bash, tcsh, zsh, etc.</em>) running with the -identity of the user. - -<p> -Traditionally, the former step is achieved by the <em/login/ -application prompting the user for a password and then verifying that -it agrees with that located on the system; hence verifying that -as far as the system is concerned the user is who they claim to be. -This is the task that is delegated to <bf/Linux-PAM/. - -<p> -From the perspective of the application programmer (in this case the -person that wrote the <em/login/ application), <bf/Linux-PAM/ takes -care of this authentication task -- verifying the identity of the user. - -<p> -The flexibility of <bf/Linux-PAM/ is that <em/you/, the system -administrator, have the freedom to stipulate which authentication -scheme is to be used. You have the freedom to set the scheme for -any/all PAM-aware applications on your Linux system. That is, you can -authenticate from anything as naive as <em/simple trust/ -(<tt/pam_permit/) to something as paranoid as a combination of a -retinal scan, a voice print and a one-time password! - -<p> -To illustrate the flexibility you face, consider the following -situation: a system administrator (parent) wishes to improve the -mathematical ability of her users (children). She can configure their -favorite ``Shoot 'em up game'' (PAM-aware of course) to authenticate -them with a request for the product of a couple of random numbers less -than 12. It is clear that if the game is any good they will soon learn -their <em/multiplication tables/. As they mature, the authentication -can be upgraded to include (long) division! - -<p> -<bf/Linux-PAM/ deals with four separate types of (management) -task. These are: <em/authentication management/; <em/account -management/; <em/session management/; and <em/password management/. -The association of the preferred management scheme with the behavior -of an application is made with entries in the relevant <bf/Linux-PAM/ -configuration file. The management functions are performed by -<em/modules/ specified in the configuration file. The syntax for this -file is discussed in the section <ref id="configuration" -name="below">. - -<p> -Here is a figure that describes the overall organization of -<bf/Linux-PAM/. -<tscreen> -<verb> - +----------------+ - | application: X | - +----------------+ / +----------+ +================+ - | authentication-[---->--\--] Linux- |--<--| PAM config file| - | + [----<--/--] PAM | |================| - |[conversation()][--+ \ | | | X auth .. a.so | - +----------------+ | / +-n--n-----+ | X auth .. b.so | - | | | __| | | _____/ - | service user | A | | |____,-----' - | | | V A - +----------------+ +------|-----|---------+ -----+------+ - +---u-----u----+ | | | - | auth.... |--[ a ]--[ b ]--[ c ] - +--------------+ - | acct.... |--[ b ]--[ d ] - +--------------+ - | password |--[ b ]--[ c ] - +--------------+ - | session |--[ e ]--[ c ] - +--------------+ -</verb> -</tscreen> -By way of explanation, the left of the figure represents the -application; application X. Such an application interfaces with the -<bf/Linux-PAM/ library and knows none of the specifics of its -configured authentication method. The <bf/Linux-PAM/ library (in the -center) consults the contents of the PAM configuration file and loads -the modules that are appropriate for application-X. These modules fall -into one of four management groups (lower-center) and are stacked in -the order they appear in the configuration file. These modules, when -called by <bf/Linux-PAM/, perform the various authentication tasks for -the application. Textual information, required from/or offered to the -user, can be exchanged through the use of the application-supplied -<em/conversation/ function. - -<sect1>Getting started - -<p> -The following text was contributed by Seth Chaiklin: -<tscreen> -<verb> -To this point, we have described how PAM should work in an -ideal world, in which all applications are coded properly. -However, at the present time (October 1998), this is far -from the case. Therefore, here are some practical considerations -in trying to use PAM in your system. - -Why bother, is it really worth all the trouble? - -If you running Linux as a single user system, or in an -environment where all the users are trusted, then there -is no real advantage for using PAM. -</verb> -</tscreen> - -<p> -<BF>Ed:</BF> there is actually an advantage since you can <em/dummy -down/ the authentication to the point where you don't have -any... Almost like Win95. -<p> -In a networked environment, it is clear that you need to think a -little more about how users etc., are authenticated:] - -<p> -<tscreen> -<verb> -If you are running Linux as a server, where several different -services are being provided (e.g., WWW with areas restricted by -password control, PPP), then there can be some real and interesting -value for PAM. In particular, through the use of modules, PAM can -enable a program to search through several different password -databases, even if that program is not explicitly coded for -that particular database. Here are some examples of the possibilities -that this enables. - - o Apache has a module that provides PAM services. Now - authentication - to use particular directories can be conducted by PAM, which - means that the range of modules that are available to PAM can - be used, including RADIUS, NIS, NCP (which means that Novell - password databases can be used). - - o pppd has a PAMified version (available from Red Hat) Now it is - possible to use a series of databases to authenticate ppp users. - In addition to the normal Linux-based password databases (such - as /etc/passwd and /etc/shadow), you can use PAM modules to - authenticate against Novell password databases or NT-based - password databases. - - o The preceding two examples can be combined. Imagaine that the - persons in your office/department are already registered with a - username and password in a Novell or NT LAN. If you wanted to - use this database on your Linux server (for PPP access, for - web access, or even for normal shell access), you can use PAM - to authenticate against this existing database, rather than - maintain a separate database on both Linux and the LAN server. - - -Can I use PAM for any program that requires authentication? - -Yes and no. Yes, if you have access to the source code, and can -add the appropriate PAM functions. No, if you do not have access -to the source code, and the binary does not have the PAM functions -included. - -In other words, if a program is going to use PAM, then it has to -have PAM functions explicitly coded into the program. If they -are not, then it is not possible to use PAM. - -How can I tell whether a program has PAM coded into it or not? - -A quick-and-dirty (but not always reliable) method is to ldd -<programname> -If libpam and libpam_misc are not among the libraries that the program -uses, then it is not going to work with PAM. However, it is possible -that the libraries are included, but there are still problems, because -the PAM coding in the program does not work as it should. So a -more reliable method is to make the follow tests. - -In the /etc/pam.d directory, one needs to make a configuration file -for the program that one wants to run. The exact name of the -configuration -file is hard-coded into the program. Usually, it is the same name as -the -program, but not always. For sake of illustration, let's assume that -the program is named "pamprog" and the name of the configuration file -is /etc/pam.d/pamprog. - -In the /etc/pam.d/pamprog but the following two lines: - -auth required pam_permit.so -auth required pam_warn.so - - -Now try to use pamprog. The first line in the configuration file -says that all users are permitted. The second line will write a -warning to your syslog file (or whether you syslog is writing - -messages). If this test succeeds, then you know that you have -a program that can understand pam, and you can start the more -interesting work of deciding how to stack modules in your -/etc/pam.d/pamprog file. -</verb> -</tscreen> - -<sect>The Linux-PAM configuration file -<label id="configuration"> - -<p> -<bf/Linux-PAM/ is designed to provide the system administrator with a -great deal of flexibility in configuring the privilege granting -applications of their system. The local configuration of those aspects -of system security controlled by <tt/Linux-PAM/ is contained in one of -two places: either the single system file, <tt>/etc/pam.conf</tt>; or -the <tt>/etc/pam.d/</tt> directory. In this section we discuss the -correct syntax of and generic options respected by entries to these -files. - -<sect1>Configuration file syntax - -<p> -The reader should note that the <bf/Linux-PAM/ specific tokens in this -file are case <em/insensitive/. The module paths, however, are case -sensitive since they indicate a file's <em/name/ and reflect the case -dependence of typical Linux file-systems. The case-sensitivity of the -arguments to any given module is defined for each module in turn. - -<p> -In addition to the lines described below, there are two <em/special/ -characters provided for the convenience of the system administrator: -comments are preceded by a `<tt/#/' and extend to the -next end-of-line; also, module specification lines may be extended -with a `<tt/\/' escaped newline. - -<p> -A general configuration line of the <tt>/etc/pam.conf</tt> file has -the following form: -<tscreen> -<verb> -service-name module-type control-flag module-path args -</verb> -</tscreen> -Below, we explain the meaning of each of these tokens. The second (and -more recently adopted) way of configuring <bf/Linux-PAM/ is via the -contents of the <tt>/etc/pam.d/</tt> directory. Once we have explained -the meaning of the above tokens, we will describe this method. - -<p> -<descrip> -<tag><tt/service-name/</tag> -The name of the service associated with this entry. Frequently the -service name is the conventional name of the given application. For -example, `<tt/ftpd/', `<tt/rlogind/' and `<tt/su/', <em/etc./ . - -<p> -There is a special <tt/service-name/, reserved for defining a default -authentication mechanism. It has the name `<tt/OTHER/' and may be -specified in either lower or upper case characters. Note, when there -is a module specified for a named service, the `<tt/OTHER/' entries -are ignored. - -<tag><tt/module-type/</tag> -One of (currently) four types of module. The four types are as -follows: -<itemize> -<item> <tt/auth/; this module type provides two aspects of -authenticating the user. Firstly, it establishes that the user is who -they claim to be, by instructing the application to prompt the user -for a password or other means of identification. Secondly, the module -can grant <tt/group/ membership (independently of the -<tt>/etc/groups</tt> file discussed above) or other privileges through -its <em/credential/ granting properties. - -<item> <tt/account/; this module performs non-authentication based -account management. It is typically used to restrict/permit access to -a service based on the time of day, currently available system -resources (maximum number of users) or perhaps the location of the -applicant user---`<tt/root/' login only on the console. - -<item> <tt/session/; primarily, this module is associated with doing -things that need to be done for the user before/after they can be -given service. Such things include the logging of information -concerning the opening/closing of some data exchange with a user, -mounting directories, etc. . - -<item> <tt/password/; this last module type is required for updating the -authentication token associated with the user. Typically, there is one -module for each `challenge/response' based authentication (<tt/auth/) -module-type. - -</itemize> - -<tag><tt/control-flag/</tag> - -The control-flag is used to indicate how the PAM library will react to -the success or failure of the module it is associated with. Since -modules can be <em/stacked/ (modules of the same type execute in -series, one after another), the control-flags determine the relative -importance of each module. The application is not made aware of the -individual success or failure of modules listed in the -`<tt>/etc/pam.conf</tt>' file. Instead, it receives a summary -<em/success/ or <em/fail/ response from the <bf/Linux-PAM/ library. -The order of execution of these modules is that of the entries in the -<tt>/etc/pam.conf</tt> file; earlier entries are executed before later -ones. As of Linux-PAM v0.60, this <em/control-flag/ can be defined -with one of two syntaxes. - -<p> -The simpler (and historical) syntax for the control-flag is a single -keyword defined to indicate the severity of concern associated with -the success or failure of a specific module. There are four such -keywords: <tt/required/, <tt/requisite/, <tt/sufficient/, -<tt/optional/ and <tt/include/. - -<p> -The Linux-PAM library interprets these keywords in the following -manner: - -<itemize> - -<item> <tt/required/; this indicates that the success of the module is -required for the <tt/module-type/ facility to succeed. Failure of this -module will not be apparent to the user until all of the remaining -modules (of the same <tt/module-type/) have been executed. - -<item> <tt/requisite/; like <tt/required/, however, in the case that -such a module returns a failure, control is directly returned to the -application. The return value is that associated with the <em/first/ -<tt/required/ or <tt/requisite/ module to fail. Note, this flag can be -used to protect against the possibility of a user getting the -opportunity to enter a password over an unsafe medium. It is -conceivable that such behavior might inform an attacker of valid -accounts on a system. This possibility should be weighed against the -not insignificant concerns of exposing a sensitive password in a -hostile environment. - -<item> <tt/sufficient/; the success of this module is deemed -`<em/sufficient/' to satisfy the <bf/Linux-PAM/ library that this -module-type has succeeded in its purpose. In the event that no -previous <tt/required/ module has failed, no more `<em/stacked/' -modules of this type are invoked. (Note, in this case subsequent -<tt/required/ modules are <bf/not/ invoked.). A failure of this module -is not deemed as fatal to satisfying the application that this -<tt/module-type/ has succeeded. - -<item> <tt/optional/; as its name suggests, this <tt/control-flag/ -marks the module as not being critical to the success or failure of -the user's application for service. In general, <bf/Linux-PAM/ -ignores such a module when determining if the module stack will -succeed or fail. However, in the absence of any definite successes or -failures of previous or subsequent stacked modules this module will -determine the nature of the response to the application. One example -of this latter case, is when the other modules return something like -<tt/PAM_IGNORE/. - -<item> <tt/include/; this tells PAM to include all lines of given type -from the configuration file specified as an argument to this control. -The whole idea is to create few "systemwide" pam configs and include -parts of them in application pam configs. - - -</itemize> - -<p> -The more elaborate (newer) syntax is much more specific and gives the -administrator a great deal of control over how the user is -authenticated. This form of the control flag is delimeted with square -brackets and consists of a series of <tt/value=action/ tokens: -<tscreen> -<verb> - [value1=action1 value2=action2 ...] -</verb> -</tscreen> - -<p> -Here, <tt/valueI/ is one of the following <em/return values/: -<tt/success/; <tt/open_err/; <tt/symbol_err/; <tt/service_err/; -<tt/system_err/; <tt/buf_err/; <tt/perm_denied/; <tt/auth_err/; -<tt/cred_insufficient/; <tt/authinfo_unavail/; <tt/user_unknown/; -<tt/maxtries/; <tt/new_authtok_reqd/; <tt/acct_expired/; -<tt/session_err/; <tt/cred_unavail/; <tt/cred_expired/; <tt/cred_err/; -<tt/no_module_data/; <tt/conv_err/; <tt/authtok_err/; -<tt/authtok_recover_err/; <tt/authtok_lock_busy/; -<tt/authtok_disable_aging/; <tt/try_again/; <tt/ignore/; <tt/abort/; -<tt/authtok_expired/; <tt/module_unknown/; <tt/bad_item/; and -<tt/default/. The last of these (<tt/default/) can be used to set the -action for those return values that are not explicitly defined. - -<p> -The <tt/actionI/ can be a positive integer or one of the following -tokens: <tt/ignore/; <tt/ok/; <tt/done/; <tt/bad/; <tt/die/; and -<tt/reset/. A positive integer, <tt/J/, when specified as the action, -can be used to indicate that the next <em/J/ modules of the current -module-type will be skipped. In this way, the administrator can -develop a moderately sophisticated stack of modules with a number of -different paths of execution. Which path is taken can be determined -by the reactions of individual modules. - -<p> -<itemize> -<item><tt/ignore/ - when used with a stack of modules, the module's - return status will not contribute to the return code the application - obtains. -<item><tt/bad/ - this action indicates that the return code should be - thought of as indicative of the module failing. If this module is - the first in the stack to fail, its status value will be used for - that of the whole stack. -<item><tt/die/ - equivalent to <tt/bad/ with the side effect of - terminating the module stack and PAM immediately returning to the - application. -<item><tt/ok/ - this tells <bf/PAM/ that the administrator thinks this - return code should contribute directly to the return code of the full - stack of modules. In other words, if the former state of the stack - would lead to a return of <tt/PAM_SUCCESS/, the module's return code - will override this value. Note, if the former state of the stack - holds some value that is indicative of a modules failure, this 'ok' - value will not be used to override that value. -<item><tt/done/ - equivalent to <tt/ok/ with the side effect of - terminating the module stack and PAM immediately returning to the - application. -<item><tt/reset/ - clear all memory of the state of the module stack and - start again with the next stacked module. -</itemize> - -<p> -Each of the four keywords: <tt/required/; <tt/requisite/; -<tt/sufficient/; and <tt/optional/, have an equivalent expression in -terms of the <tt/[...]/ syntax. They are as follows: -<itemize> -<item><tt/required/ is equivalent to -<tt/[success=ok new_authtok_reqd=ok ignore=ignore default=bad]/ -<item><tt/requisite/ is equivalent to -<tt/[success=ok new_authtok_reqd=ok ignore=ignore default=die]/ -<item><tt/sufficient/ is equivalent to -<tt/[success=done new_authtok_reqd=done default=ignore]/ -<item><tt/optional/ is equivalent to -<tt/[success=ok new_authtok_reqd=ok default=ignore]/ -</itemize> - -<p> -Just to get a feel for the power of this new syntax, here is a taste -of what you can do with it. With <bf/Linux-PAM-0.63/, the notion of -client plug-in agents was introduced. This is something that makes it -possible for PAM to support machine-machine authentication using the -transport protocol inherent to the client/server application. With -the ``<tt/[ ... value=action ... ]/'' control syntax, it is possible -for an application to be configured to support binary prompts with -compliant clients, but to gracefully fall over into an alternative -authentication mode for older, legacy, applications. - -<tag> <tt/module-path/</tag> - -The path-name of the dynamically loadable object file; <em/the -pluggable module/ itself. If the first character of the module path is -`<tt>/</tt>', it is assumed to be a complete path. If this is not the -case, the given module path is appended to the default module path: -<tt>/lib/security</tt> (but see the notes <ref id="text-conventions" -name="above">). - -<tag> <tt/args/</tag> - -The <tt/args/ are a list of tokens that are passed to the module when -it is invoked. Much like arguments to a typical Linux shell command. -Generally, valid arguments are optional and are specific to any given -module. Invalid arguments are ignored by a module, however, when -encountering an invalid argument, the module is required to write an -error to <tt/syslog(3)/. For a list of <em/generic/ options see the -next section. - -Note, if you wish to include spaces in an argument, you should -surround that argument with square brackets. For example: -<tscreen> -<verb> -squid auth required pam_mysql.so user=passwd_query passwd=mada \ - db=eminence [query=select user_name from internet_service where \ - user_name='%u' and password=PASSWORD('%p') and \ - service='web_proxy'] -</verb> -</tscreen> -Note, when using this convention, you can include `<tt/[/' characters -inside the string, and if you wish to include a `<tt/]/' character -inside the string that will survive the argument parsing, you should -use `<tt/\[/'. In other words: -<tscreen> -<verb> -[..[..\]..] --> ..[..].. -</verb> -</tscreen> - -</descrip> - -<p> -Any line in (one of) the configuration file(s), that is not formatted -correctly, will generally tend (erring on the side of caution) to make -the authentication process fail. A corresponding error is written to -the system log files with a call to <tt/syslog(3)/. - -<sect1>Directory based configuration - -<p> -More flexible than the single configuration file, as of version 0.56, -it is possible to configure <tt>libpam</tt> via the contents of the -<tt>/etc/pam.d/</tt> directory. In this case the directory is filled -with files each of which has a filename equal to a service-name (in -lower-case): it is the personal configuration file for the named -service. - -<p> -<bf/Linux-PAM/ can be compiled in one of two modes. The preferred -mode uses either <tt>/etc/pam.d/</tt> or <tt>/etc/pam.conf</tt> -configuration but not both. That is to say, if there is a -<tt>/etc/pam.d/</tt> directory then libpam only uses the files -contained in this directory. However, in the absence of the -<tt>/etc/pam.d/</tt> directory the <tt>/etc/pam.conf</tt> file is used -(this is likely to be the mode your preferred distribution uses). The -other mode is to use both <tt>/etc/pam.d/</tt> and -<tt>/etc/pam.conf</tt> in sequence. In this mode, entries in -<tt>/etc/pam.d/</tt> override those of <tt>/etc/pam.conf</tt>. - -The syntax of each file in <tt>/etc/pam.d/</tt> is similar to that of -the <tt>/etc/pam.conf</tt> file and is made up of lines of the -following form: -<tscreen> -<verb> -module-type control-flag module-path arguments -</verb> -</tscreen> -The only difference being that the <tt>service-name</tt> is not -present. The service-name is of course the name of the given -configuration file. For example, <tt>/etc/pam.d/login</tt> contains -the configuration for the <em>login</em> service. - -<p> -This method of configuration has a number of advantages over the -single file approach. We list them here to assist the reader in -deciding which scheme to adopt: - -<p> -<itemize> - -<item>A lower chance of misconfiguring an application. There is one -less field to mis-type when editing the configuration files by hand. - -<item>Easier to maintain. One application may be reconfigured without -risk of interfering with other applications on the system. - -<item>It is possible to symbolically link different services -configuration files to a single file. This makes it easier to keep the -system policy for access consistent across different applications. -(It should be noted, to conserve space, it is equally possible to -<em>hard</em> link a number of configuration files. However, care -should be taken when administering this arrangement as editing a hard -linked file is likely to break the link.) - -<item>A potential for quicker configuration file parsing. Only the -relevant entries are parsed when a service gets bound to its modules. - -<item>It is possible to limit read access to individual <bf/Linux-PAM/ -configuration files using the file protections of the filesystem. - -<item>Package management becomes simpler. Every time a new -application is installed, it can be accompanied by an -<tt>/etc/pam.d/</tt><em>xxxxxx</em> file. - -</itemize> - -<sect1>Generic optional arguments - -<p> -The following are optional arguments which are likely to be understood -by any module. Arguments (including these) are in general -<em/optional/. - -<p> -<descrip> -<tag><tt/debug/</tag> - -Use the <tt/syslog(3)/ call to log debugging information to the system -log files. - -<tag> <tt/no_warn/</tag> - -Instruct module to not give warning messages to the application. - -<tag> <tt/use_first_pass/</tag> - -The module should not prompt the user for a password. Instead, it -should obtain the previously typed password (from the preceding -<tt/auth/ module), and use that. If that doesn't work, then the user -will not be authenticated. (This option is intended for <tt/auth/ -and <tt/password/ modules only). - -<tag> <tt/try_first_pass/</tag> - -The module should attempt authentication with the previously typed -password (from the preceding <tt/auth/ module). If that doesn't work, -then the user is prompted for a password. (This option is intended for -<tt/auth/ modules only). - -<tag> <tt/use_mapped_pass/</tag> - -This argument is not currently supported by any of the modules in the -<bf/Linux-PAM/ distribution because of possible consequences -associated with U.S. encryption exporting restrictions. Within the -U.S., module developers are, of course, free to implement it (as are -developers in other countries). For compatibility reasons we describe -its use as suggested in the <bf/DCE-RFC 86.0/, see section <ref -id="see-also-sec" name="bibliography"> for a pointer to this document. - -<p> -The <tt/use_mapped_pass/ argument instructs the module to take the -clear text authentication token entered by a previous module (that -requests such a token) and use it to generate an encryption/decryption -key with which to safely store/retrieve the authentication token -required for this module. In this way the user can enter a single -authentication token and be quietly authenticated by a number of -stacked modules. Obviously a convenient feature that necessarily -requires some reliably strong encryption to make it secure. -This argument is intended for the <tt/auth/ and <tt/password/ module -types only. - -<tag><tt/expose_account/</tag> - -<p> -In general the leakage of some information about user accounts is not -a secure policy for modules to adopt. Sometimes information such as -users names or home directories, or preferred shell, can be used to -attack a user's account. In some circumstances, however, this sort of -information is not deemed a threat: displaying a user's full name when -asking them for a password in a secured environment could also be -called being 'friendly'. The <tt/expose_account/ argument is a -standard module argument to encourage a module to be less discrete -about account information as it is deemed appropriate by the local -administrator. - -</descrip> - -<sect1>Example configuration file entries - -<p> -In this section, we give some examples of entries that can be present -in the <bf/Linux-PAM/ configuration file. As a first attempt at -configuring your system you could do worse than to implement these. - -<sect2>Default policy - -<p> -If a system is to be considered secure, it had better have a -reasonably secure `<tt/OTHER/' entry. The following is a paranoid -setting (which is not a bad place to start!): -<tscreen> -<verb> -# -# default; deny access -# -OTHER auth required pam_deny.so -OTHER account required pam_deny.so -OTHER password required pam_deny.so -OTHER session required pam_deny.so -</verb> -</tscreen> -Whilst fundamentally a secure default, this is not very sympathetic to -a misconfigured system. For example, such a system is vulnerable to -locking everyone out should the rest of the file become badly written. - -<p> -The module <tt/pam_deny/ (documented in a later section) is not very -sophisticated. For example, it logs no information when it is invoked -so unless the users of a system contact the administrator when failing -to execute a service application, the administrator may go for a long -while in ignorance of the fact that his system is misconfigured. - -<p> -The addition of the following line before those in the above example -would provide a suitable warning to the administrator. -<tscreen> -<verb> -# -# default; wake up! This application is not configured -# -OTHER auth required pam_warn.so -OTHER password required pam_warn.so -</verb> -</tscreen> -Having two ``<tt/OTHER auth/'' lines is an example of stacking. - -<p> -On a system that uses the <tt>/etc/pam.d/</tt> configuration, the -corresponding default setup would be achieved with the following file: -<tscreen> -<verb> -# -# default configuration: /etc/pam.d/other -# -auth required pam_warn.so -auth required pam_deny.so -account required pam_deny.so -password required pam_warn.so -password required pam_deny.so -session required pam_deny.so -</verb> -</tscreen> -This is the only explicit example we give for an <tt>/etc/pam.d/</tt> -file. In general, it should be clear how to transpose the remaining -examples to this configuration scheme. - -<p> -On a less sensitive computer, one on which the system administrator -wishes to remain ignorant of much of the power of <tt/Linux-PAM/, the -following selection of lines (in <tt>/etc/pam.conf</tt>) is likely to -mimic the historically familiar Linux setup. -<tscreen> -<verb> -# -# default; standard UN*X access -# -OTHER auth required pam_unix.so -OTHER account required pam_unix.so -OTHER password required pam_unix.so -OTHER session required pam_unix.so -</verb> -</tscreen> -In general this will provide a starting place for most applications. -Unfortunately, most is not all. One application that might require -additional lines is <em/ftpd/ if you wish to enable -<em/anonymous-ftp/. - -<p> -To enable anonymous-ftp, the following lines might be used to replace -the default (<tt/OTHER/) ones. (<bf/*WARNING*/ as of 1996/12/28 this -does not work correctly with any ftpd. Consequently, this description -may be subject to change or the application will be fixed.) -<tscreen> -<verb> -# -# ftpd; add ftp-specifics. These lines enable anonymous ftp over -# standard UN*X access (the listfile entry blocks access to -# users listed in /etc/ftpusers) -# -ftpd auth sufficient pam_ftp.so -ftpd auth required pam_unix_auth.so use_first_pass -ftpd auth required pam_listfile.so \ - onerr=succeed item=user sense=deny file=/etc/ftpusers -</verb> -</tscreen> -Note, the second line is necessary since the default entries are -ignored by a service application (here <em/ftpd/) if there are -<em/any/ entries in <tt>/etc/pam.conf</tt> for that specified service. -Again, this is an example of authentication module stacking. Note the -use of the <tt/sufficient/ control-flag. It says that ``if this module -authenticates the user, ignore the subsequent <tt/auth/ -modules''. Also note the use of the ``<tt/use_first_pass/'' -module-argument, this instructs the UN*X authentication module that it -is not to prompt for a password but rely on one already having been -obtained by the <tt/pam_ftp/ module. - -<sect>Security issues of Linux-PAM - -<p> -This section will discuss good practices for using PAM in a secure -manner. <em>It is currently sadly lacking...suggestions are -welcome!</em> - -<sect1>If something goes wrong - -<p> -<bf/Linux-PAM/ has the potential to seriously change the security of -your system. You can choose to have no security or absolute security -(no access permitted). In general, <bf/Linux-PAM/ errs towards the -latter. Any number of configuration errors can dissable access to -your system partially, or completely. - -<p> -The most dramatic problem that is likely to be encountered when -configuring <bf/Linux-PAM/ is that of <em>deleting</em> the -configuration file(s): <tt>/etc/pam.d/*</tt> and/or -<tt>/etc/pam.conf</tt>. This will lock you out of your own system! - -<p> -To recover, your best bet is to reboot the system in single user mode -and set about correcting things from there. The following has been -<em>adapted</em> from a life-saving email on the subject from David -Wood: -<verb> -> What the hell do I do now? - -OK, don't panic. The first thing you have to realize is that -this happens to 50% of users who ever do anything with PAM. -It happened here, not once, not twice, but three times, all -different, and in the end, the solution was the same every -time. - -First, I hope you installed LILO with a delay. If you can, -reboot, hit shift or tab or something and type: - - LILO boot: linux single - -(Replace 'linux' with 'name-of-your-normal-linux-image'). -This will let you in without logging in. Ever wondered how -easy it is to break into a linux machine from the console? -Now you know. - -If you can't do that, then get yourself a bootkernel floppy -and a root disk a-la slackware's rescue.gz. (Red Hat's -installation disks can be used in this mode too.) - -In either case, the point is to get back your root prompt. - -Second, I'm going to assume that you haven't completely -nuked your pam installation - just your configuration files. -Here's how you make your configs nice again: - - cd /etc - mv pam.conf pam.conf.orig - mv pam.d pam.d.orig - mkdir pam.d - cd pam.d - -and then use vi to create a file called "other" in this -directory. It should contain the following four lines: - - auth required pam_unix.so - account required pam_unix.so - password required pam_unix.so - session required pam_unix.so - -Now you have the simplest possible PAM configuration that -will work the way you're used to. Everything should -magically start to work again. Try it out by hitting ALT-F2 -and logging in on another virtual console. If it doesn't -work, you have bigger problems, or you've mistyped -something. One of the wonders of this system (seriously, -perhaps) is that if you mistype anything in the conf files, -you usually get no error reporting of any kind on the -console - just some entries in the log file. So look there! -(Try 'tail /var/log/messages'.) - -From here you can go back and get a real configuration -going, hopefully after you've tested it first on a machine -you don't care about screwing up. :/ - -</verb> - -<sect1>Avoid having a weak `other' configuration - -<p> -It is not a good thing to have a weak default (<tt/OTHER/) entry. -This service is the default configuration for all PAM aware -applications and if it is weak, your system is likely to be vulnerable -to attack. - -<p> -Here is a sample "other" configuration file. The <em/pam_deny/ module will -deny access and the <em/pam_warn/ module will send a syslog message to -<tt/auth.notice/: - -<p> -<tscreen> -<verb> -# -# The PAM configuration file for the `other' service -# -auth required pam_deny.so -auth required pam_warn.so -account required pam_deny.so -account required pam_warn.so -password required pam_deny.so -password required pam_warn.so -session required pam_deny.so -session required pam_warn.so -</verb> -</tscreen> - -<sect>A reference guide for available modules - -<p> -Here, we collect together some descriptions of the various modules -available for <bf/Linux-PAM/. In general these modules should be -freely available. Where this is not the case, it will be indicated. - -<p> -Also please note the comments contained in the section <ref -id="text-conventions" name="on text conventions above"> when copying -the examples listed below. - -<!-- insert-file MODULES-SGML --> - -<sect>Files - -<p><descrip> - -<tag><tt>/lib/libpam.so.*</tt></tag> - -the shared library providing applications with access to -<bf/Linux-PAM/. - -<tag><tt>/etc/pam.conf</tt></tag> - -the <bf/Linux-PAM/ configuration file. - -<tag><tt>/lib/security/pam_*.so</tt></tag> - -the primary location for <bf/Linux-PAM/ dynamically loadable object -files; the modules. - -</descrip> - -<sect>See also<label id="see-also-sec"> - -<p><itemize> - -<item>The <bf/Linux-PAM/ Application Writers' Guide. - -<item>The <bf/Linux-PAM/ Module Writers' Guide. - -<item>The V. Samar and R. Schemers (SunSoft), ``UNIFIED LOGIN WITH -PLUGGABLE AUTHENTICATION MODULES'', Open Software Foundation Request -For Comments 86.0, October 1995. See this url: -<tt><htmlurl -url="http://www.kernel.org/pub/linux/libs/pam/pre/doc/rfc86.0.txt.gz" -name="http://www.kernel.org/pub/linux/libs/pam/pre/doc/rfc86.0.txt.gz"></tt> - -</itemize> - -<sect>Notes - -<p> -I intend to put development comments here... like ``at the moment -this isn't actually supported''. At release time what ever is in -this section will be placed in the Bugs section below! :) - -<p> -Are we going to be able to support the <tt/use_mapped_pass/ module -argument? Anyone know a cheap (free) good lawyer?! - -<p> -<itemize> -<item> -This issue may go away, as Sun have investigated adding a new -management group for mappings. In this way, libpam would have mapping -modules that could securely store passwords using strong cryptography -and in such a way that they need not be distributed with Linux-PAM. -</itemize> - -<sect>Author/acknowledgments - -<p> -This document was written by Andrew G. Morgan (morgan@kernel.org) -with many contributions from -<!-- insert-file CREDITS --> - -<p> -Thanks are also due to Sun Microsystems, especially to Vipin Samar and -Charlie Lai for their advice. At an early stage in the development of -<bf/Linux-PAM/, Sun graciously made the documentation for their -implementation of PAM available. This act greatly accelerated the -development of <bf/Linux-PAM/. - -<sect>Bugs/omissions - -<p> -More PAM modules are being developed all the time. It is unlikely that -this document will ever be truely up to date! - -<p> -This manual is unfinished. Only a partial list of people is credited -for all the good work they have done. - -<sect>Copyright information for this document - -<p> -Copyright (c) Andrew G. Morgan 1996-2002. All rights reserved. -<newline> -Email: <tt><morgan@kernel.org></tt> - -<p> -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are -met: - -<p> -<itemize> - -<item> -1. Redistributions of source code must retain the above copyright - notice, and the entire permission notice in its entirety, - including the disclaimer of warranties. - -<item> -2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - -<item> -3. The name of the author may not be used to endorse or promote - products derived from this software without specific prior - written permission. - -</itemize> - -<p> -<bf/Alternatively/, this product may be distributed under the terms of -the GNU General Public License (GPL), in which case the provisions of -the GNU GPL are required <bf/instead of/ the above restrictions. -(This clause is necessary due to a potential bad interaction between -the GNU GPL and the restrictions contained in a BSD-style copyright.) - -<p> -THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR -TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -DAMAGE. - -<p> -<tt>$Id$</tt> - -</article> -- cgit v1.2.3