path: root/doc/man/pam.conf.5.xml

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
                   "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd">
<refentry id='pam.conf'>

  <refmeta>
    <refentrytitle>pam.conf</refentrytitle>
    <manvolnum>5</manvolnum>
    <refmiscinfo class='setdesc'>Linux-PAM Manual</refmiscinfo>
  </refmeta>

  <refnamediv id='pam.conf-name'>
    <refname>pam.conf</refname>
    <refname>pam.d</refname>
    <refpurpose>PAM configuration files</refpurpose>
  </refnamediv>

<!-- body begins here -->

  <refsect1 id='pam.conf-description'>
    <title>DESCRIPTION</title>
    <para>
      When a <emphasis>PAM</emphasis> aware privilege granting application
      is started, it activates its attachment to the PAM-API. This
      activation performs a number of tasks, the most important being the
      reading of the configuration file(s): <filename>/etc/pam.conf</filename>.
      Alternatively, this may be the contents of the
      <filename>/etc/pam.d/</filename> directory. The presence of this
      directory will cause Linux-PAM to ignore
      <filename>/etc/pam.conf</filename>.
    </para>

    <para>
      These files list the <emphasis>PAM</emphasis>s that will do the
      authentication tasks required by this service, and the appropriate
      behavior of the PAM-API in the event that individual
      <emphasis>PAM</emphasis>s fail.
    </para>

    <para>
      The syntax of the <filename>/etc/pam.conf</filename>
      configuration file is as follows. The file is made up of a list
      of rules, each rule is typically placed on a single line,
      but may be extended with an escaped end of line: `\&lt;LF&gt;'.
      Comments are preceded with `#' marks and extend to the next end of
      line.
    </para>

    <para>
      The format of each rule is a space separated collection of tokens,
      the first three being case-insensitive:
    </para>

    <para>
      <emphasis remap='B'> service  type  control  module-path  module-arguments</emphasis>
    </para>

    <para>
      The syntax of files contained in the <filename>/etc/pam.d/</filename>
      directory, are identical except for the absence of any
      <emphasis>service</emphasis> field. In this case, the
      <emphasis>service</emphasis> is the name of the file in the
      <filename>/etc/pam.d/</filename> directory. This filename must be
      in lower case.
    </para>

    <para>
      An important feature of <emphasis>PAM</emphasis>, is that a
      number of rules may be <emphasis>stacked</emphasis> to combine
      the services of a number of PAMs for a given authentication task.
    </para>

    <para>
      The <emphasis>service</emphasis> is typically the familiar name of
      the corresponding application: <emphasis>login</emphasis> and
      <emphasis>su</emphasis> are good examples. The
      <emphasis>service</emphasis>-name, <emphasis>other</emphasis>,
      is reserved for giving <emphasis>default</emphasis> rules.
      Only lines that mention the current service (or in the absence
      of such, the <emphasis>other</emphasis> entries) will be associated
      with the given service-application.
    </para>

    <para>
      The <emphasis>type</emphasis> is the management group that the rule
      corresponds to. It is used to specify which of the management groups
      the subsequent module is to be associated with. Valid entries are:
    </para>
    <variablelist>
      <varlistentry>
        <term>account</term>
        <listitem>
          <para>
            this module type performs non-authentication based account
            management. It is typically used to restrict/permit access
            to a service based on the time of day, currently available
            system resources (maximum number of users) or perhaps the
            location of  the applicant user -- 'root' login only on the
            console.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>auth</term>
        <listitem>
          <para>
            this module type provides two aspects of authenticating
            the user. Firstly, it establishes that the user is who they
            claim to be, by instructing the application to prompt the user
            for a password or other means of identification. Secondly, the
            module can grant group membership or other privileges through
            its credential granting properties.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>password</term>
        <listitem>
          <para>
            this module type is required for updating the authentication
            token associated with the user. Typically, there is one module
            for each 'challenge/response' based authentication (auth) type.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>session</term>
        <listitem>
          <para>
            this module type is associated with doing things that need to
            be done for the user before/after they can be given service.
            Such things include the logging of information concerning the
            opening/closing of some data exchange with a user, mounting
            directories, etc.
          </para>
        </listitem>
      </varlistentry>
    </variablelist>

    <para>
      The third field, <emphasis>control</emphasis>, indicates the
      behavior of the PAM-API should the module fail to succeed in its
      authentication task. There are two types of syntax for this control
      field: the simple one has a single simple keyword; the more
      complicated one involves a square-bracketed selection of
      <emphasis>value=action</emphasis> pairs.
    </para>

    <para>
      For the simple (historical) syntax valid <emphasis>control</emphasis>
      values are:
    </para>
    <variablelist>
      <varlistentry>
        <term>required</term>
        <listitem>
          <para>
            failure of such a PAM will ultimately lead to the PAM-API
            returning failure but only after the remaining
            <emphasis>stacked</emphasis> modules (for this
            <emphasis>service</emphasis> and <emphasis>type</emphasis>)
            have been invoked.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>requisite</term>
        <listitem>
          <para>
            like <emphasis>required</emphasis>, however, in the case that
            such a module returns a failure, control is directly returned
            to the application. The return value is that associated with
            the first required or requisite module to fail. Note, this flag
            can be used to protect against the possibility of a user getting
            the opportunity to enter a password over an unsafe medium. It is
            conceivable that such behavior might inform an attacker of valid
            accounts on a system. This possibility should be weighed against
            the not insignificant concerns of exposing a sensitive password
            in a hostile environment.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>sufficient</term>
        <listitem>
          <para>
            success of such a module is enough to satisfy the
            authentication requirements of the stack of modules (if a
            prior <emphasis>required</emphasis> module has failed the
            success of this one is <emphasis>ignored</emphasis>). A failure
            of this module is not deemed as fatal to satisfying the
            application that this type has succeeded.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>optional</term>
        <listitem>
          <para>
            the success or failure of this module is only important if
            it is the only module in the stack associated with this
            <emphasis>service</emphasis>+<emphasis>type</emphasis>.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>include</term>
        <listitem>
          <para>
            include all lines of given type from the configuration
            file specified as an argument to this control.
          </para>
        </listitem>
      </varlistentry>
    </variablelist>

    <para>
      For the more complicated syntax valid <emphasis>control</emphasis>
      values have the following form:
    </para>
    <programlisting>
      [value1=action1 value2=action2 ...]
    </programlisting>

    <para>
      Where <emphasis>valueN</emphasis> corresponds to the return code
      from the function invoked in the module for which the line is
      defined. It is selected from one of these:
      <emphasis>success</emphasis>, <emphasis>open_err</emphasis>,
      <emphasis>symbol_err</emphasis>, <emphasis>service_err</emphasis>,
      <emphasis>system_err</emphasis>, <emphasis>buf_err</emphasis>,
      <emphasis>perm_denied</emphasis>, <emphasis>auth_err</emphasis>,
      <emphasis>cred_insufficient</emphasis>,
      <emphasis>authinfo_unavail</emphasis>,
      <emphasis>user_unknown</emphasis>, <emphasis>maxtries</emphasis>,
      <emphasis>new_authtok_reqd</emphasis>,
      <emphasis>acct_expired</emphasis>, <emphasis>session_err</emphasis>,
      <emphasis>cred_unavail</emphasis>, <emphasis>cred_expired</emphasis>,
      <emphasis>cred_err</emphasis>, <emphasis>no_module_data</emphasis>,
      <emphasis>conv_err</emphasis>, <emphasis>authtok_err</emphasis>,
      <emphasis>authtok_recover_err</emphasis>,
      <emphasis>authtok_lock_busy</emphasis>,
      <emphasis>authtok_disable_aging</emphasis>,
      <emphasis>try_again</emphasis>, <emphasis>ignore</emphasis>,
      <emphasis>abort</emphasis>, <emphasis>authtok_expired</emphasis>,
      <emphasis>module_unknown</emphasis>, <emphasis>bad_item</emphasis>
      and <emphasis>default</emphasis>.
    </para>
    <para>
      The last of these, <emphasis>default</emphasis>, implies 'all
      <emphasis>valueN</emphasis>'s not mentioned explicitly. Note, the
      full list of PAM errors is available in
      <filename>/usr/include/security/_pam_types.h</filename>. The
      <emphasis>actionN</emphasis> can be: an unsigned integer,
      <emphasis>n</emphasis>, signifying an action of 'jump over the
      next <emphasis>n</emphasis> modules in the stack', or take one
      of the following forms:
    </para>
    <variablelist>
      <varlistentry>
        <term>ignore</term>
        <listitem>
           <para>
             when used with a stack of modules, the module's return
             status will not contribute to the return code the application
             obtains.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>bad</term>
        <listitem>
           <para>
             this action indicates that the return code should be thought
             of as indicative of the module failing. If this module is the
             first in the stack to fail, its status value will be used for
             that of the whole stack.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>die</term>
        <listitem>
           <para>
             equivalent to bad with the side effect of terminating the
             module stack and PAM immediately returning to the application.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>ok</term>
        <listitem>
           <para>
             this tells PAM that the administrator thinks this return code
             should contribute directly to the return code of the full
             stack of modules. In other words, if the former state of the
             stack would lead to a return of <emphasis>PAM_SUCCESS</emphasis>,
             the module's return code will override this value. Note, if
             the former state of the stack holds some value that is
             indicative of a modules failure, this 'ok' value will not be
             used to override that value.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>done</term>
        <listitem>
           <para>
             equivalent to ok with the side effect of terminating the module
             stack and PAM immediately returning to the application.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>reset</term>
        <listitem>
           <para>
             clear all memory of the state of the module stack and
             start again with the next stacked module.
          </para>
        </listitem>
      </varlistentry>
    </variablelist>

    <para>
      Each of the four keywords: required; requisite; sufficient; and
      optional, have an equivalent expression in terms of the [...]
      syntax. They are as follows:
    </para>
    <variablelist>
      <varlistentry>
        <term>required</term>
        <listitem>
           <para>
             [success=ok new_authtok_reqd=ok ignore=ignore default=bad]
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>requisite</term>
        <listitem>
           <para>
             [success=ok new_authtok_reqd=ok ignore=ignore default=die]
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>sufficient</term>
        <listitem>
           <para>
             [success=done new_authtok_reqd=done default=ignore]
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>optional</term>
        <listitem>
           <para>
             [success=ok new_authtok_reqd=ok default=ignore]
          </para>
        </listitem>
      </varlistentry>
    </variablelist>

    <para>
      <emphasis>module-path</emphasis> is either the full filename
      of the PAM to be used by the application (it begins with a '/'),
      or a relative pathname from the default module location:
      <filename>/lib/security/</filename> or
      <filename>/lib64/security/</filename>, depending on the architecture.
    </para>

    <para>
      <emphasis>module-arguments</emphasis> are a space separated list
      of tokens that can be used to modify the specific behavior of the
      given PAM. Such arguments will be documented for each individual
      module. Note, if you wish to include spaces in an argument, you
      should surround that argument with square brackets.
    </para>
    <programlisting>
    squid auth required pam_mysql.so user=passwd_query passwd=mada \
          db=eminence [query=select user_name from internet_service \
          where user_name='%u' and password=PASSWORD('%p') and \
        service='web_proxy']
    </programlisting>
    <para>
      When using this convention, you can include `[' characters
      inside the string, and if you wish to include a `]' character
      inside the string that will survive the argument parsing, you
      should use `\['. In other words:
    </para>
    <programlisting>
    [..[..\]..]    -->   ..[..]..
    </programlisting>

    <para>
      Any line in (one of) the configuration file(s), that is not formatted
      correctly, will generally tend (erring on the side of caution) to make
      the authentication process fail.  A corresponding error is written to
      the system log files with a call to
      <citerefentry>
        <refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum>
      </citerefentry>.
    </para>

    <para>
      More flexible than the single configuration file is it to
      configure libpam via the contents of the
      <filename>/etc/pam.d/</filename> directory. In this case the
      directory is filled with files each of which has a filename
      equal to a service-name (in lower-case): it is the personal
      configuration file for the named service.
    </para>

    <para>
      The syntax of each file in /etc/pam.d/ is similar to that of the
      <filename>/etc/pam.conf</filename> file and is made up of lines
      of the following form:
    </para>

    <para>
      <emphasis remap='B'> type  control  module-path  module-arguments</emphasis>
    </para>

  </refsect1>

  <refsect1 id='pam.conf-see_also'>
    <title>SEE ALSO</title>
    <para>
      <citerefentry>
        <refentrytitle>pam</refentrytitle><manvolnum>3</manvolnum>
      </citerefentry>,
      <citerefentry>
        <refentrytitle>PAM</refentrytitle><manvolnum>8</manvolnum>
      </citerefentry>,
      <citerefentry>
        <refentrytitle>pam_start</refentrytitle><manvolnum>3</manvolnum>
      </citerefentry>
    </para>

  </refsect1>
</refentry>