% Pandoc % John MacFarlane % October 30, 2006 Pandoc is a [Haskell] library for converting from one markup format to another, and a command-line tool that uses this library. It can read [markdown] and (subsets of) [reStructuredText], [HTML], and [LaTeX], and it can write [markdown], [reStructuredText], [HTML], [LaTeX], [RTF], and [S5] HTML slide shows. Pandoc's version of markdown contains some enhancements, like footnotes and embedded LaTeX. In contrast to existing tools for converting markdown to HTML, which use regex substitutions, Pandoc has a modular design: it consists of a set of readers, which parse text in a given format and produce a native representation of the document, and a set of writers, which convert this native representation into a target format. Thus, adding an input or output format requires only adding a reader or writer. [markdown]: http://daringfireball.net/projects/markdown/ [reStructuredText]: http://docutils.sourceforge.net/docs/ref/rst/introduction.html [S5]: http://meyerweb.com/eric/tools/s5/ [HTML]: http://www.w3.org/TR/html40/ [LaTeX]: http://www.latex-project.org/ [RTF]: http://en.wikipedia.org/wiki/Rich_Text_Format [Haskell]: http://www.haskell.org/ (c) 2006 John MacFarlane (jgm At berkeley.edu). Released under the [GPL], version 2 or greater. This software carries no warranty of any kind. (See LICENSE for full copyright and warranty notices.) Recai Oktaş (roktas At debian.org) deserves credit for the build system, the debian package, and the robust wrapper scripts. [GPL]: http://www.gnu.org/copyleft/gpl.html # Using Pandoc If you run `pandoc` without arguments, it will accept input from STDIN. If you run it with file names as arguments, it will take input from those files. It accepts several command-line options. For a list, type pandoc -h The most important options specify the format of the source file and the output. The default reader is markdown; the default writer is HTML. So if you don't specify a reader or writer, `pandoc` will convert markdown to HTML. For example, pandoc hello.txt will convert `hello.txt` from markdown to HTML. For other conversions, you must specify a reader and/or a writer using the `-r` and `-w` flags. To convert markdown to LaTeX, you would write: pandoc -w latex hello.txt To convert html to markdown: pandoc -r html -w markdown hello.txt Supported writers include `markdown`, `latex`, `html`, `rtf` (rich text format), `rst` (reStructuredText), and `s5` (which produces an HTML file that acts like powerpoint). Supported readers include `markdown`, `html`, `latex`, and `rst`. Note that the `rst` reader only parses a subset of reStructuredText syntax. For example, it doesn't handle tables, definition lists, option lists, or footnotes. It handles only the constructs expressible in unextended markdown. But for simple documents it should be adequate. The `latex` and `html` readers are also limited in what they can do. `pandoc` writes its output to STDOUT. If you want to write to a file, use redirection: pandoc hello.txt > hello.html Note that you can specify multiple input files on the command line. `pandoc` will concatenate them all (with blank lines between them) before parsing: pandoc -s chapter1.txt chapter2.txt chapter3.txt references.txt > book.html (The `-s` option here tells `pandoc` to produce a standalone HTML file, with a proper header, rather than a fragment. For more details on this and many other command-line options, see below.) # Character encodings Unfortunately, due to limitations in GHC, `pandoc` does not automatically detect the system's local character encoding. Hence, all input and output is assumed to be in the UTF-8 encoding. If your local character encoding is not UTF-8 and you use accented or foreign characters, you should pipe the input and output through [`iconv`]. For example, iconv -t utf-8 source.txt | pandoc | iconv -f utf-8 > output.html will convert `source.txt` from the local encoding to UTF-8, then convert it to HTML, then convert back to the local encoding, putting the output in `output.html`. [`iconv`]: http://www.gnu.org/software/libiconv/ The shell scripts (described below) automatically convert the input from the local encoding to UTF-8 before running them through `pandoc`, then convert the output back to the local encoding. ## LaTeX and UTF-8 LaTeX sources produced by Pandoc use `ucs.sty`, which is included in many LaTeX distributions. This allows LaTeX to process UTF-8 characters. If your installation of LaTeX does not include `ucs.sty`, you will get an error when you try to compile a LaTeX file produced by Pandoc, or when you use the `markdown2pdf` script (described below). If this happens, install the [unicode] package from [CTAN]. (Get the `unicode.zip` file from CTAN, unpack it, and copy the whole `unicode` directory into `~/texmf/tex/latex/`. You may also need to run `mktexlsr` or `texhash` before the files can be found by TeX.) [CTAN]: http://www.ctan.org [unicode]: http://www.ctan.org/tex-archive/macros/latex/contrib/unicode/ # The shell scripts Five shell scripts have been included that make it easy to run `pandoc` without worrying about character encodings, and without remembering all the command-line options: - `markdown2html` converts markdown-formatted text to HTML - `markdown2latex` converts markdown-formatted text to LaTeX - `markdown2pdf` produces a PDF file from markdown-formatted text, using `pdflatex`. - `html2markdown` converts HTML to markdown-formatted text - `latex2markdown` converts LaTeX to markdown-formatted text All of the scripts use `iconv` (if available) to convert to and from the local character encoding. All of the scripts presuppose that `pandoc` is in the path, and some have additional requirements. (For example, `html2markdown` uses `tidy`, and `markdown2pdf` uses `pdflatex`.) When no arguments are specified, text will be read from standard input. Arguments specify input files (limited to one in the case of `latex2markdown` and `html2markdown`; the other scripts accept any number of arguments). `html2markdown` may take a URL as argument instead of a filename; in this case, `curl`, `wget`, or an available text-based browser will be used to fetch the contents of the URL. (The `-n` option inhibits this behavior; the `-g` option allows the user to specify a custom command that will be used to fetch from a URL.) With the exception of `markdown2pdf`, the scripts write to standard output. Output can be sent to a file using shell output redirection: latex2markdown sample.tex > sample.txt The default behavior of `markdown2pdf` is to create a file with the same base name as the first argument and the extension `pdf`; thus, for example, markdown2pdf sample.txt endnotes.txt will produce `sample.pdf`. (If `sample.pdf` exists already, it will be backed up before being overwritten.) An output file name can be specified explicitly using the `-o` option: markdown2pdf -o "My Book.pdf" chap1.txt chap2.txt chap3.txt Options specific to the scripts, like `-o`, `-g`, and `-n`, must be specified *before* any command-line arguments (file names or URLs). Any options specified *after* the command-line arguments will be passed directly to `pandoc`. For example, markdown2html tusks.txt -S -T Elephants will convert `tusks.txt` to `tusks.html` using smart quotes, ellipses, and dashes, with "Elephants" as the page title prefix. (For a complete list of `pandoc` options, see below.) When there are no command-line arguments (because input is from STDIN), `pandoc` options must be preceded by ` -- `: cat tusks.txt | markdown2html -- -S -T Elephants The ` -- ` separator may optionally be used when there are command-line arguments: markdown2html -- tusks.txt -S -T Elephants # Command-line options Various command-line options can be used to customize the output. For a complete list, type pandoc --help `-p` or `--preserve-tabs` causes tabs in the source text to be preserved, rather than converted to spaces (the default). `--tabstop` allows the user to set the tab stop (which defaults to 4). `-R` or `--parse-raw` causes the HTML and LaTeX readers to parse HTML codes and LaTeX environments that it can't translate as raw HTML or LaTeX. Raw HTML can be printed in markdown, reStructuredText, HTML, and S5 output; raw LaTeX can be printed in markdown, reStructuredText, and LaTeX output. The default is for the readers to omit untranslatable HTML codes and LaTeX environments. (The LaTeX reader does pass through untranslatable LaTeX commands, even if `-R` is not specified.) `-s` or `--standalone` causes `pandoc` to produce a standalone file, complete with appropriate document headers. By default, `pandoc` produces a fragment. `--custom-header` can be used to specify a custom document header. To see the headers used by default, use the `-D` option: for example, `pandoc -D html` prints the default HTML header. `-c` or `--css` allows the user to specify a custom stylesheet that will be linked to in HTML and S5 output. `-H` or `--include-in-header` specifies a file to be included (verbatim) at the end of the document header. This can be used, for example, to include special CSS or javascript in HTML documents. `-B` or `--include-before-body` specifies a file to be included (verbatim) at the beginning of the document body (after the `` tag in HTML, or the `\begin{document}` command in LaTeX). This can be used to include navigation bars or banners in HTML documents. `-A` or `--include-after-body` specifies a file to be included (verbatim) at the end of the docment body (before the `` tag in HTML, or the `\end{document}` command in LaTeX). `-T` or `--title-prefix` specifies a string to be included as a prefix at the beginning of the title that appears in the HTML header (but not in the title as it appears at the beginning of the HTML body). (See below on Titles.) `-S` or `--smartypants` causes `pandoc` to produce typographically correct HTML output, along the lines of John Gruber's [Smartypants]. Straight quotes are converted to curly quotes, `---` to dashes, and `...` to ellipses. [Smartypants]: http://daringfireball.net/projects/smartypants/ `-m` or `--asciimathml` will cause LaTeX formulas (between $ signs) in HTML or S5 to display as formulas rather than as code. The trick will not work in all browsers, but it works in Firefox. Peter Jipsen's [ASCIIMathML] script is used to do the magic. [ASCIIMathML]: http://www1.chapman.edu/~jipsen/mathml/asciimath.html `-i` or `--incremental` causes all lists in S5 output to be displayed incrementally by default (one item at a time). The normal default is for lists to be displayed all at once. `-N` or `--number-sections` causes sections to be numbered in LaTeX output. By default, sections are not numbered. # Pandoc's markdown vs. standard markdown In parsing markdown, Pandoc departs from and extends [standard markdown] in a few respects. (To run Pandoc on the official markdown test suite, type `make test-markdown`.) [standard markdown]: http://daringfireball.net/projects/markdown/syntax ## Lists Pandoc behaves differently from standard markdown on some "edge cases" involving lists. Consider this source: 1. First 2. Second: - Fee - Fie - Foe 3. Third Pandoc transforms this into a "compact list" (with no `

` tags around "First", "Second", or "Third"), while markdown puts `

` tags around "Second" and "Third" (but not "First"), because of the blank space around "Third". Pandoc follows a simple rule: if the text is followed by a blank line, it is treated as a paragraph. Since "Second" is followed by a list, and not a blank line, it isn't treated as a paragraph. The fact that the list is followed by a blank line is irrelevant. Unlike standard markdown, Pandoc allows ordered list items to be marked with single letters, instead of numbers. So, for example, this source yields a nested ordered list: 1. First 2. Second a. Fee b. Fie 3. Third Pandoc also extends standard markdown in allowing list item markers to be terminated by ')': 1) First 2) Second A) Fee B) Fie 3) Third Note that Pandoc pays no attention to the *type* of ordered list item marker used. Thus, the following is treated just the same as the example above: A) First 1. Second 2. Fee B) Fie C) Third ## Literal quotes in titles Standard markdown allows unescaped literal quotes in titles, as in [foo]: "bar "embedded" baz" Pandoc requires all quotes within titles to be escaped: [foo]: "bar \"embedded\" baz" ## Reference links Pandoc allows implicit reference links in either of two styles: 1. Here's my [link] 2. Here's my [link][] [link]: linky.com If there's no corresponding reference, the implicit reference link will appear as regular bracketed text. Note: even `[link][]` will appear as `[link]` if there's no reference for `link`. If you want `[link][]`, use a backslash escape: `\[link]\[]`. ## Footnotes Pandoc's markdown allows footnotes, using the following syntax: here is a footnote reference,^(1) and another.^(longnote) ^(1) Here is the footnote. It can go anywhere in the document, except in embedded contexts like block quotes or lists. ^(longnote) Here's the other note. This one contains multiple blocks. ^ ^ Caret characters are used to indicate that the blocks all belong to a single footnote (as with block quotes). ^ ^ If you want, you can use a caret at the beginning of every line, ^ as with blockquotes, but all that you need is a caret at the ^ beginning of the first line of the block and any preceding ^ blank lines. Footnote references may not contain spaces, tabs, or newlines. ## Embedded HTML Pandoc treats embedded HTML in markdown a bit differently than Markdown 1.0. While Markdown 1.0 leaves HTML blocks exactly as they are, Pandoc treats text between HTML tags as markdown. Thus, for example, Pandoc will turn
*one* [a link](http://google.com)
into
one a link
whereas Markdown 1.0 will preserve it as is. There is one exception to this rule: text between `` tags is not interpreted as markdown. This departure from standard markdown should make it easier to mix markdown with HTML block elements. For example, one can surround a block of markdown text with `

` tags without preventing it from being interpreted as markdown. ## Title blocks If the file begins with a title block % title % author(s) (separated by commas) % date it will be parsed as bibliographic information, not regular text. (It will be used, for example, in the title of standalone LaTeX or HTML output.) The block may contain just a title, a title and an author, or all three lines. Each must begin with a % and fit on one line. The title may contain standard inline formatting. If you want to include an author but no title, or a title and a date but no author, you need a blank line: % My title % % June 15, 2006 Titles will be written only when the `--standalone` (`-s`) option is chosen. In HTML output, titles will appear twice: once in the document head -- this is the title that will appear at the top of the window in a browser -- and once at the beginning of the document body. The title in the document head can have an optional prefix attached (`--title-prefix` or `-T` option). The title in the body appears as an H1 element with class "title", so it can be suppressed or reformatted with CSS. If a title prefix is specified with `-T` and no title block appears in the document, the title prefix will be used by itself as the HTML title. ## Box-style blockquotes Pandoc supports emacs-style boxquote block quotes, in addition to standard markdown (email-style) boxquotes: ,---- | They look like this. `---- ## Inline LaTeX Anything between two $ characters will be parsed as LaTeX math. The opening $ must have a character immediately to its right, while the closing $ must have a character immediately to its left. Thus, `$20,000 and $30,000` won't parse as math. The $ character can be escaped with a backslash if needed. If you pass the `-m` (`--asciimathml`) option to `pandoc`, it will include the [ASCIIMathML] script in the resulting HTML. This will cause LaTeX math to be displayed as formulas in better browsers. [ASCIIMathML]: http://www1.chapman.edu/~jipsen/asciimath.html Inline LaTeX commands will also be preserved and passed unchanged to the LaTeX writer. Thus, for example, you can use LaTeX to include BibTeX citations: This result was proved in \cite{jones.1967}. You can also use LaTeX environments. For example, \begin{tabular}{|l|l|}\hline Age & Frequency \\ \hline 18--25 & 15 \\ 26--35 & 33 \\ 36--45 & 22 \\ \hline \end{tabular} Note, however, that material between the begin and end tags will be interpreted as raw LaTeX, not as markdown. ## Custom headers When run with the "standalone" option (`-s`), `pandoc` creates a standalone file, complete with an appropriate header. To see the default headers used for html and latex, use the following commands: pandoc -D html pandoc -D latex If you want to use a different header, just create a file containing it and specify it on the command line as follows: pandoc --header=MyHeaderFile # Producing S5 with Pandoc Producing an [S5] slide show with Pandoc is easy. A title page is constructed automatically from the document's title block (see above). Each section (with a level-one header) produces a single slide. (Note that if the section is too big, the slide will not fit on the page; S5 is not smart enough to produce multiple pages.) Here's the markdown source for a simple slide show, `eating.txt`: % Eating Habits % John Doe % March 22, 2005 # In the morning - Eat eggs - Drink coffee # In the evening - Eat spaghetti - Drink wine To produce the slide show, simply type pandoc -w s5 -s eating.txt > eating.html and open up `eating.html` in a browser. The HTML file embeds all the required javascript and CSS, so no other files are necessary. Note that by default, the S5 writer produces lists that display "all at once." If you want your lists to display incrementally (one item at a time), use the `-i` option. If you want a particular list to depart from the default (that is, to display incrementally without the `-i` option and all at once with the `-i` option), put it in a block quote: > - Eat spaghetti > - Drink wine In this way incremental and nonincremental lists can be mixed in a single document.