Commit upstream pcre-8.39.tar.bz2

1 files changed, 1245 insertions, 0 deletions

diff --git a/sljit/sljitLir.h b/sljit/sljitLir.h
new file mode 100644
index 0000000..df69b86
--- /dev/null
+++ b/sljit/sljitLir.h
@@ -0,0 +1,1245 @@
+/*
+ *    Stack-less Just-In-Time compiler
+ *
+ *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification, are
+ * permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this list of
+ *      conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list
+ *      of conditions and the following disclaimer in the documentation and/or other materials
+ *      provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SLJIT_LIR_H_
+#define _SLJIT_LIR_H_
+
+/*
+   ------------------------------------------------------------------------
+    Stack-Less JIT compiler for multiple architectures (x86, ARM, PowerPC)
+   ------------------------------------------------------------------------
+
+   Short description
+    Advantages:
+      - The execution can be continued from any LIR instruction. In other
+        words, it is possible to jump to any label from anywhere, even from
+        a code fragment, which is compiled later, if both compiled code
+        shares the same context. See sljit_emit_enter for more details
+      - Supports self modifying code: target of (conditional) jump and call
+        instructions and some constant values can be dynamically modified
+        during runtime
+        - although it is not suggested to do it frequently
+        - can be used for inline caching: save an important value once
+          in the instruction stream
+        - since this feature limits the optimization possibilities, a
+          special flag must be passed at compile time when these
+          instructions are emitted
+      - A fixed stack space can be allocated for local variables
+      - The compiler is thread-safe
+      - The compiler is highly configurable through preprocessor macros.
+        You can disable unneeded features (multithreading in single
+        threaded applications), and you can use your own system functions
+        (including memory allocators). See sljitConfig.h
+    Disadvantages:
+      - No automatic register allocation, and temporary results are
+        not stored on the stack. (hence the name comes)
+    In practice:
+      - This approach is very effective for interpreters
+        - One of the saved registers typically points to a stack interface
+        - It can jump to any exception handler anytime (even if it belongs
+          to another function)
+        - Hot paths can be modified during runtime reflecting the changes
+          of the fastest execution path of the dynamic language
+        - SLJIT supports complex memory addressing modes
+        - mainly position and context independent code (except some cases)
+
+    For valgrind users:
+      - pass --smc-check=all argument to valgrind, since JIT is a "self-modifying code"
+*/
+
+#if !(defined SLJIT_NO_DEFAULT_CONFIG && SLJIT_NO_DEFAULT_CONFIG)
+#include "sljitConfig.h"
+#endif
+
+/* The following header file defines useful macros for fine tuning
+sljit based code generators. They are listed in the beginning
+of sljitConfigInternal.h */
+
+#include "sljitConfigInternal.h"
+
+/* --------------------------------------------------------------------- */
+/*  Error codes                                                          */
+/* --------------------------------------------------------------------- */
+
+/* Indicates no error. */
+#define SLJIT_SUCCESS			0
+/* After the call of sljit_generate_code(), the error code of the compiler
+   is set to this value to avoid future sljit calls (in debug mode at least).
+   The complier should be freed after sljit_generate_code(). */
+#define SLJIT_ERR_COMPILED		1
+/* Cannot allocate non executable memory. */
+#define SLJIT_ERR_ALLOC_FAILED		2
+/* Cannot allocate executable memory.
+   Only for sljit_generate_code() */
+#define SLJIT_ERR_EX_ALLOC_FAILED	3
+/* Return value for SLJIT_CONFIG_UNSUPPORTED placeholder architecture. */
+#define SLJIT_ERR_UNSUPPORTED		4
+/* An ivalid argument is passed to any SLJIT function. */
+#define SLJIT_ERR_BAD_ARGUMENT		5
+
+/* --------------------------------------------------------------------- */
+/*  Registers                                                            */
+/* --------------------------------------------------------------------- */
+
+/*
+  Scratch (R) registers: registers whose may not preserve their values
+  across function calls.
+
+  Saved (S) registers: registers whose preserve their values across
+  function calls.
+
+  The scratch and saved register sets are overlap. The last scratch register
+  is the first saved register, the one before the last is the second saved
+  register, and so on.
+
+  If an architecture provides two scratch and three saved registers,
+  its scratch and saved register sets are the following:
+
+     R0   |  [S4]  |   R0 and S4 represent the same physical register
+     R1   |  [S3]  |   R1 and S3 represent the same physical register
+    [R2]  |   S2   |   R2 and S2 represent the same physical register
+    [R3]  |   S1   |   R3 and S1 represent the same physical register
+    [R4]  |   S0   |   R4 and S0 represent the same physical register
+
+  Note: SLJIT_NUMBER_OF_SCRATCH_REGISTERS would be 2 and
+        SLJIT_NUMBER_OF_SAVED_REGISTERS would be 3 for this architecture.
+
+  Note: On all supported architectures SLJIT_NUMBER_OF_REGISTERS >= 10
+        and SLJIT_NUMBER_OF_SAVED_REGISTERS >= 5. However, 4 registers
+        are virtual on x86-32. See below.
+
+  The purpose of this definition is convenience. Although a register
+  is either scratch register or saved register, SLJIT allows accessing
+  them from the other set. For example, four registers can be used as
+  scratch registers and the fifth one as saved register on the architecture
+  above. Of course the last two scratch registers (R2 and R3) from this
+  four will be saved on the stack, because they are defined as saved
+  registers in the application binary interface. Still R2 and R3 can be
+  used for referencing to these registers instead of S2 and S1, which
+  makes easier to write platform independent code. Scratch registers
+  can be saved registers in a similar way, but these extra saved
+  registers will not be preserved across function calls! Hence the
+  application must save them on those platforms, where the number of
+  saved registers is too low. This can be done by copy them onto
+  the stack and restore them after a function call.
+
+  Note: To emphasize that registers assigned to R2-R4 are saved
+        registers, they are enclosed by square brackets. S3-S4
+        are marked in a similar way.
+
+  Note: sljit_emit_enter and sljit_set_context defines whether a register
+        is S or R register. E.g: when 3 scratches and 1 saved is mapped
+        by sljit_emit_enter, the allowed register set will be: R0-R2 and
+        S0. Although S2 is mapped to the same position as R2, it does not
+        available in the current configuration. Furthermore the R3 (S1)
+        register does not available as well.
+*/
+
+/* When SLJIT_UNUSED is specified as destination, the result is discarded. */
+#define SLJIT_UNUSED		0
+
+/* Scratch registers. */
+#define SLJIT_R0	1
+#define SLJIT_R1	2
+#define SLJIT_R2	3
+/* Note: on x86-32, R3 - R6 (same as S3 - S6) are emulated (they
+   are allocated on the stack). These registers are called virtual
+   and cannot be used for memory addressing (cannot be part of
+   any SLJIT_MEM1, SLJIT_MEM2 construct). There is no such
+   limitation on other CPUs. See sljit_get_register_index(). */
+#define SLJIT_R3	4
+#define SLJIT_R4	5
+#define SLJIT_R5	6
+#define SLJIT_R6	7
+#define SLJIT_R7	8
+#define SLJIT_R8	9
+#define SLJIT_R9	10
+/* All R registers provided by the architecture can be accessed by SLJIT_R(i)
+   The i parameter must be >= 0 and < SLJIT_NUMBER_OF_REGISTERS. */
+#define SLJIT_R(i)	(1 + (i))
+
+/* Saved registers. */
+#define SLJIT_S0	(SLJIT_NUMBER_OF_REGISTERS)
+#define SLJIT_S1	(SLJIT_NUMBER_OF_REGISTERS - 1)
+#define SLJIT_S2	(SLJIT_NUMBER_OF_REGISTERS - 2)
+/* Note: on x86-32, S3 - S6 (same as R3 - R6) are emulated (they
+   are allocated on the stack). These registers are called virtual
+   and cannot be used for memory addressing (cannot be part of
+   any SLJIT_MEM1, SLJIT_MEM2 construct). There is no such
+   limitation on other CPUs. See sljit_get_register_index(). */
+#define SLJIT_S3	(SLJIT_NUMBER_OF_REGISTERS - 3)
+#define SLJIT_S4	(SLJIT_NUMBER_OF_REGISTERS - 4)
+#define SLJIT_S5	(SLJIT_NUMBER_OF_REGISTERS - 5)
+#define SLJIT_S6	(SLJIT_NUMBER_OF_REGISTERS - 6)
+#define SLJIT_S7	(SLJIT_NUMBER_OF_REGISTERS - 7)
+#define SLJIT_S8	(SLJIT_NUMBER_OF_REGISTERS - 8)
+#define SLJIT_S9	(SLJIT_NUMBER_OF_REGISTERS - 9)
+/* All S registers provided by the architecture can be accessed by SLJIT_S(i)
+   The i parameter must be >= 0 and < SLJIT_NUMBER_OF_SAVED_REGISTERS. */
+#define SLJIT_S(i)	(SLJIT_NUMBER_OF_REGISTERS - (i))
+
+/* Registers >= SLJIT_FIRST_SAVED_REG are saved registers. */
+#define SLJIT_FIRST_SAVED_REG (SLJIT_S0 - SLJIT_NUMBER_OF_SAVED_REGISTERS + 1)
+
+/* The SLJIT_SP provides direct access to the linear stack space allocated by
+   sljit_emit_enter. It can only be used in the following form: SLJIT_MEM1(SLJIT_SP).
+   The immediate offset is extended by the relative stack offset automatically.
+   The sljit_get_local_base can be used to obtain the absolute offset. */
+#define SLJIT_SP	(SLJIT_NUMBER_OF_REGISTERS + 1)
+
+/* Return with machine word. */
+
+#define SLJIT_RETURN_REG	SLJIT_R0
+
+/* x86 prefers specific registers for special purposes. In case of shift
+   by register it supports only SLJIT_R2 for shift argument
+   (which is the src2 argument of sljit_emit_op2). If another register is
+   used, sljit must exchange data between registers which cause a minor
+   slowdown. Other architectures has no such limitation. */
+
+#define SLJIT_PREF_SHIFT_REG	SLJIT_R2
+
+/* --------------------------------------------------------------------- */
+/*  Floating point registers                                             */
+/* --------------------------------------------------------------------- */
+
+/* Each floating point register can store a 32 or a 64 bit precision
+   value. The FR and FS register sets are overlap in the same way as R
+   and S register sets. See above. */
+
+/* Note: SLJIT_UNUSED as destination is not valid for floating point
+   operations, since they cannot be used for setting flags. */
+
+/* Floating point scratch registers. */
+#define SLJIT_FR0	1
+#define SLJIT_FR1	2
+#define SLJIT_FR2	3
+#define SLJIT_FR3	4
+#define SLJIT_FR4	5
+#define SLJIT_FR5	6
+/* All FR registers provided by the architecture can be accessed by SLJIT_FR(i)
+   The i parameter must be >= 0 and < SLJIT_NUMBER_OF_FLOAT_REGISTERS. */
+#define SLJIT_FR(i)	(1 + (i))
+
+/* Floating point saved registers. */
+#define SLJIT_FS0	(SLJIT_NUMBER_OF_FLOAT_REGISTERS)
+#define SLJIT_FS1	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - 1)
+#define SLJIT_FS2	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - 2)
+#define SLJIT_FS3	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - 3)
+#define SLJIT_FS4	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - 4)
+#define SLJIT_FS5	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - 5)
+/* All S registers provided by the architecture can be accessed by SLJIT_FS(i)
+   The i parameter must be >= 0 and < SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS. */
+#define SLJIT_FS(i)	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - (i))
+
+/* Float registers >= SLJIT_FIRST_SAVED_FLOAT_REG are saved registers. */
+#define SLJIT_FIRST_SAVED_FLOAT_REG (SLJIT_FS0 - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS + 1)
+
+/* --------------------------------------------------------------------- */
+/*  Main structures and functions                                        */
+/* --------------------------------------------------------------------- */
+
+/*
+	The following structures are private, and can be changed in the
+	future. Keeping them here allows code inlining.
+*/
+
+struct sljit_memory_fragment {
+	struct sljit_memory_fragment *next;
+	sljit_uw used_size;
+	/* Must be aligned to sljit_sw. */
+	sljit_u8 memory[1];
+};
+
+struct sljit_label {
+	struct sljit_label *next;
+	sljit_uw addr;
+	/* The maximum size difference. */
+	sljit_uw size;
+};
+
+struct sljit_jump {
+	struct sljit_jump *next;
+	sljit_uw addr;
+	sljit_sw flags;
+	union {
+		sljit_uw target;
+		struct sljit_label* label;
+	} u;
+};
+
+struct sljit_const {
+	struct sljit_const *next;
+	sljit_uw addr;
+};
+
+struct sljit_compiler {
+	sljit_s32 error;
+	sljit_s32 options;
+
+	struct sljit_label *labels;
+	struct sljit_jump *jumps;
+	struct sljit_const *consts;
+	struct sljit_label *last_label;
+	struct sljit_jump *last_jump;
+	struct sljit_const *last_const;
+
+	void *allocator_data;
+	struct sljit_memory_fragment *buf;
+	struct sljit_memory_fragment *abuf;
+
+	/* Used scratch registers. */
+	sljit_s32 scratches;
+	/* Used saved registers. */
+	sljit_s32 saveds;
+	/* Used float scratch registers. */
+	sljit_s32 fscratches;
+	/* Used float saved registers. */
+	sljit_s32 fsaveds;
+	/* Local stack size. */
+	sljit_s32 local_size;
+	/* Code size. */
+	sljit_uw size;
+	/* For statistical purposes. */
+	sljit_uw executable_size;
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+	sljit_s32 args;
+#endif
+
+#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+	sljit_s32 mode32;
+#endif
+
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
+	sljit_s32 flags_saved;
+#endif
+
+#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
+	/* Constant pool handling. */
+	sljit_uw *cpool;
+	sljit_u8 *cpool_unique;
+	sljit_uw cpool_diff;
+	sljit_uw cpool_fill;
+	/* Other members. */
+	/* Contains pointer, "ldr pc, [...]" pairs. */
+	sljit_uw patches;
+#endif
+
+#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
+	/* Temporary fields. */
+	sljit_uw shift_imm;
+	sljit_s32 cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
+	sljit_s32 cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+	sljit_s32 cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
+	sljit_sw imm;
+	sljit_s32 cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
+	sljit_s32 delay_slot;
+	sljit_s32 cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+	sljit_s32 delay_slot;
+	sljit_s32 cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX)
+	sljit_s32 cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+	FILE* verbose;
+#endif
+
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS) \
+		|| (defined SLJIT_DEBUG && SLJIT_DEBUG)
+	/* Local size passed to the functions. */
+	sljit_s32 logical_local_size;
+#endif
+
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS) \
+		|| (defined SLJIT_DEBUG && SLJIT_DEBUG) \
+		|| (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+	sljit_s32 skip_checks;
+#endif
+};
+
+/* --------------------------------------------------------------------- */
+/*  Main functions                                                       */
+/* --------------------------------------------------------------------- */
+
+/* Creates an sljit compiler. The allocator_data is required by some
+   custom memory managers. This pointer is passed to SLJIT_MALLOC
+   and SLJIT_FREE macros. Most allocators (including the default
+   one) ignores this value, and it is recommended to pass NULL
+   as a dummy value for allocator_data.
+
+   Returns NULL if failed. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void *allocator_data);
+
+/* Frees everything except the compiled machine code. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_compiler(struct sljit_compiler *compiler);
+
+/* Returns the current error code. If an error is occurred, future sljit
+   calls which uses the same compiler argument returns early with the same
+   error code. Thus there is no need for checking the error after every
+   call, it is enough to do it before the code is compiled. Removing
+   these checks increases the performance of the compiling process. */
+static SLJIT_INLINE sljit_s32 sljit_get_compiler_error(struct sljit_compiler *compiler) { return compiler->error; }
+
+/* Sets the compiler error code to SLJIT_ERR_ALLOC_FAILED except
+   if an error was detected before. After the error code is set
+   the compiler behaves as if the allocation failure happened
+   during an sljit function call. This can greatly simplify error
+   checking, since only the compiler status needs to be checked
+   after the compilation. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_compiler_memory_error(struct sljit_compiler *compiler);
+
+/*
+   Allocate a small amount of memory. The size must be <= 64 bytes on 32 bit,
+   and <= 128 bytes on 64 bit architectures. The memory area is owned by the
+   compiler, and freed by sljit_free_compiler. The returned pointer is
+   sizeof(sljit_sw) aligned. Excellent for allocating small blocks during
+   the compiling, and no need to worry about freeing them. The size is
+   enough to contain at most 16 pointers. If the size is outside of the range,
+   the function will return with NULL. However, this return value does not
+   indicate that there is no more memory (does not set the current error code
+   of the compiler to out-of-memory status).
+*/
+SLJIT_API_FUNC_ATTRIBUTE void* sljit_alloc_memory(struct sljit_compiler *compiler, sljit_s32 size);
+
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+/* Passing NULL disables verbose. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_compiler_verbose(struct sljit_compiler *compiler, FILE* verbose);
+#endif
+
+SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compiler);
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_code(void* code);
+
+/*
+   After the machine code generation is finished we can retrieve the allocated
+   executable memory size, although this area may not be fully filled with
+   instructions depending on some optimizations. This function is useful only
+   for statistical purposes.
+
+   Before a successful code generation, this function returns with 0.
+*/
+static SLJIT_INLINE sljit_uw sljit_get_generated_code_size(struct sljit_compiler *compiler) { return compiler->executable_size; }
+
+/* Instruction generation. Returns with any error code. If there is no
+   error, they return with SLJIT_SUCCESS. */
+
+/*
+   The executable code is a function call from the viewpoint of the C
+   language. The function calls must obey to the ABI (Application
+   Binary Interface) of the platform, which specify the purpose of
+   all machine registers and stack handling among other things. The
+   sljit_emit_enter function emits the necessary instructions for
+   setting up a new context for the executable code and moves function
+   arguments to the saved registers. Furthermore the options argument
+   can be used to pass configuration options to the compiler. The
+   available options are listed before sljit_emit_enter.
+
+   The number of sljit_sw arguments passed to the generated function
+   are specified in the "args" parameter. The number of arguments must
+   be less than or equal to 3. The first argument goes to SLJIT_S0,
+   the second goes to SLJIT_S1 and so on. The register set used by
+   the function must be declared as well. The number of scratch and
+   saved registers used by the function must be passed to sljit_emit_enter.
+   Only R registers between R0 and "scratches" argument can be used
+   later. E.g. if "scratches" is set to 2, the register set will be
+   limited to R0 and R1. The S registers and the floating point
+   registers ("fscratches" and "fsaveds") are specified in a similar
+   way. The sljit_emit_enter is also capable of allocating a stack
+   space for local variables. The "local_size" argument contains the
+   size in bytes of this local area and its staring address is stored
+   in SLJIT_SP. The memory area between SLJIT_SP (inclusive) and
+   SLJIT_SP + local_size (exclusive) can be modified freely until
+   the function returns. The stack space is not initialized.
+
+   Note: the following conditions must met:
+         0 <= scratches <= SLJIT_NUMBER_OF_REGISTERS
+         0 <= saveds <= SLJIT_NUMBER_OF_REGISTERS
+         scratches + saveds <= SLJIT_NUMBER_OF_REGISTERS
+         0 <= fscratches <= SLJIT_NUMBER_OF_FLOAT_REGISTERS
+         0 <= fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS
+         fscratches + fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS
+
+   Note: every call of sljit_emit_enter and sljit_set_context
+         overwrites the previous context.
+*/
+
+/* The absolute address returned by sljit_get_local_base with
+offset 0 is aligned to sljit_d. Otherwise it is aligned to sljit_uw. */
+#define SLJIT_DOUBLE_ALIGNMENT 0x00000001
+
+/* The local_size must be >= 0 and <= SLJIT_MAX_LOCAL_SIZE. */
+#define SLJIT_MAX_LOCAL_SIZE	65536
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_enter(struct sljit_compiler *compiler,
+	sljit_s32 options, sljit_s32 args, sljit_s32 scratches, sljit_s32 saveds,
+	sljit_s32 fscratches, sljit_s32 fsaveds, sljit_s32 local_size);
+
+/* The machine code has a context (which contains the local stack space size,
+   number of used registers, etc.) which initialized by sljit_emit_enter. Several
+   functions (like sljit_emit_return) requres this context to be able to generate
+   the appropriate code. However, some code fragments (like inline cache) may have
+   no normal entry point so their context is unknown for the compiler. Their context
+   can be provided to the compiler by the sljit_set_context function.
+
+   Note: every call of sljit_emit_enter and sljit_set_context overwrites
+         the previous context. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_set_context(struct sljit_compiler *compiler,
+	sljit_s32 options, sljit_s32 args, sljit_s32 scratches, sljit_s32 saveds,
+	sljit_s32 fscratches, sljit_s32 fsaveds, sljit_s32 local_size);
+
+/* Return from machine code.  The op argument can be SLJIT_UNUSED which means the
+   function does not return with anything or any opcode between SLJIT_MOV and
+   SLJIT_MOV_P (see sljit_emit_op1). As for src and srcw they must be 0 if op
+   is SLJIT_UNUSED, otherwise see below the description about source and
+   destination arguments. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_return(struct sljit_compiler *compiler, sljit_s32 op,
+	sljit_s32 src, sljit_sw srcw);
+
+/* Fast calling mechanism for utility functions (see SLJIT_FAST_CALL). All registers and
+   even the stack frame is passed to the callee. The return address is preserved in
+   dst/dstw by sljit_emit_fast_enter (the type of the value stored by this function
+   is sljit_p), and sljit_emit_fast_return can use this as a return value later. */
+
+/* Note: only for sljit specific, non ABI compilant calls. Fast, since only a few machine
+   instructions are needed. Excellent for small uility functions, where saving registers
+   and setting up a new stack frame would cost too much performance. However, it is still
+   possible to return to the address of the caller (or anywhere else). */
+
+/* Note: flags are not changed (unlike sljit_emit_enter / sljit_emit_return). */
+
+/* Note: although sljit_emit_fast_return could be replaced by an ijump, it is not suggested,
+   since many architectures do clever branch prediction on call / return instruction pairs. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_s32 dst, sljit_sw dstw);
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_s32 src, sljit_sw srcw);
+
+/*
+   Source and destination values for arithmetical instructions
+    imm              - a simple immediate value (cannot be used as a destination)
+    reg              - any of the registers (immediate argument must be 0)
+    [imm]            - absolute immediate memory address
+    [reg+imm]        - indirect memory address
+    [reg+(reg<<imm)] - indirect indexed memory address (shift must be between 0 and 3)
+                       useful for (byte, half, int, sljit_sw) array access
+                       (fully supported by both x86 and ARM architectures, and cheap operation on others)
+*/
+
+/*
+   IMPORATNT NOTE: memory access MUST be naturally aligned except
+                   SLJIT_UNALIGNED macro is defined and its value is 1.
+
+     length | alignment
+   ---------+-----------
+     byte   | 1 byte (any physical_address is accepted)
+     half   | 2 byte (physical_address & 0x1 == 0)
+     int    | 4 byte (physical_address & 0x3 == 0)
+     word   | 4 byte if SLJIT_32BIT_ARCHITECTURE is defined and its value is 1
+            | 8 byte if SLJIT_64BIT_ARCHITECTURE is defined and its value is 1
+    pointer | size of sljit_p type (4 byte on 32 bit machines, 4 or 8 byte
+            | on 64 bit machines)
+
+   Note:   Different architectures have different addressing limitations.
+           A single instruction is enough for the following addressing
+           modes. Other adrressing modes are emulated by instruction
+           sequences. This information could help to improve those code
+           generators which focuses only a few architectures.
+
+   x86:    [reg+imm], -2^32+1 <= imm <= 2^32-1 (full address space on x86-32)
+           [reg+(reg<<imm)] is supported
+           [imm], -2^32+1 <= imm <= 2^32-1 is supported
+           Write-back is not supported
+   arm:    [reg+imm], -4095 <= imm <= 4095 or -255 <= imm <= 255 for signed
+                bytes, any halfs or floating point values)
+           [reg+(reg<<imm)] is supported
+           Write-back is supported
+   arm-t2: [reg+imm], -255 <= imm <= 4095
+           [reg+(reg<<imm)] is supported
+           Write back is supported only for [reg+imm], where -255 <= imm <= 255
+   ppc:    [reg+imm], -65536 <= imm <= 65535. 64 bit loads/stores and 32 bit
+                signed load on 64 bit requires immediates divisible by 4.
+                [reg+imm] is not supported for signed 8 bit values.
+           [reg+reg] is supported
+           Write-back is supported except for one instruction: 32 bit signed
+                load with [reg+imm] addressing mode on 64 bit.
+   mips:   [reg+imm], -65536 <= imm <= 65535
+   sparc:  [reg+imm], -4096 <= imm <= 4095
+           [reg+reg] is supported
+*/
+
+/* Register output: simply the name of the register.
+   For destination, you can use SLJIT_UNUSED as well. */
+#define SLJIT_MEM		0x80
+#define SLJIT_MEM0()		(SLJIT_MEM)
+#define SLJIT_MEM1(r1)		(SLJIT_MEM | (r1))
+#define SLJIT_MEM2(r1, r2)	(SLJIT_MEM | (r1) | ((r2) << 8))
+#define SLJIT_IMM		0x40
+
+/* Set 32 bit operation mode (I) on 64 bit CPUs. This flag is ignored on 32
+   bit CPUs. When this flag is set for an arithmetic operation, only the
+   lower 32 bit of the input register(s) are used, and the CPU status flags
+   are set according to the 32 bit result. Although the higher 32 bit of
+   the input and the result registers are not defined by SLJIT, it might be
+   defined by the CPU architecture (e.g. MIPS). To satisfy these requirements
+   all source registers must be computed by operations where this flag is
+   also set. In other words 32 and 64 bit arithmetic operations cannot be
+   mixed. The only exception is SLJIT_IMOV and SLJIT_IMOVU whose source
+   register can hold any 32 or 64 bit value. This source register is
+   converted to a 32 bit compatible format. SLJIT does not generate any
+   instructions on certain CPUs (e.g. on x86 and ARM) if the source and
+   destination operands are the same registers. Affects sljit_emit_op0,
+   sljit_emit_op1 and sljit_emit_op2. */
+#define SLJIT_I32_OP		0x100
+
+/* F32 precision mode (SP). This flag is similar to SLJIT_I32_OP, just
+   it applies to floating point registers (it is even the same bit). When
+   this flag is passed, the CPU performs 32 bit floating point operations.
+   Similar to SLJIT_I32_OP, all register arguments must be computed by
+   floating point operations where this flag is also set. Affects
+   sljit_emit_fop1, sljit_emit_fop2 and sljit_emit_fcmp. */
+#define SLJIT_F32_OP		0x100
+
+/* Common CPU status flags for all architectures (x86, ARM, PPC)
+    - carry flag
+    - overflow flag
+    - zero flag
+    - negative/positive flag (depends on arc)
+   On mips, these flags are emulated by software. */
+
+/* By default, the instructions may, or may not set the CPU status flags.
+   Forcing to set or keep status flags can be done with the following flags: */
+
+/* Note: sljit tries to emit the minimum number of instructions. Using these
+   flags can increase them, so use them wisely to avoid unnecessary code generation. */
+
+/* Set Equal (Zero) status flag (E). */
+#define SLJIT_SET_E			0x0200
+/* Set unsigned status flag (U). */
+#define SLJIT_SET_U			0x0400
+/* Set signed status flag (S). */
+#define SLJIT_SET_S			0x0800
+/* Set signed overflow flag (O). */
+#define SLJIT_SET_O			0x1000
+/* Set carry flag (C).
+   Note: Kinda unsigned overflow, but behaves differently on various cpus. */
+#define SLJIT_SET_C			0x2000
+/* Do not modify the flags (K).
+   Note: This flag cannot be combined with any other SLJIT_SET_* flag. */
+#define SLJIT_KEEP_FLAGS		0x4000
+
+/* Notes:
+     - you cannot postpone conditional jump instructions except if noted that
+       the instruction does not set flags (See: SLJIT_KEEP_FLAGS).
+     - flag combinations: '|' means 'logical or'. */
+
+/* Starting index of opcodes for sljit_emit_op0. */
+#define SLJIT_OP0_BASE			0
+
+/* Flags: - (never set any flags)
+   Note: breakpoint instruction is not supported by all architectures (e.g. ppc)
+         It falls back to SLJIT_NOP in those cases. */
+#define SLJIT_BREAKPOINT		(SLJIT_OP0_BASE + 0)
+/* Flags: - (never set any flags)
+   Note: may or may not cause an extra cycle wait
+         it can even decrease the runtime in a few cases. */
+#define SLJIT_NOP			(SLJIT_OP0_BASE + 1)
+/* Flags: - (may destroy flags)
+   Unsigned multiplication of SLJIT_R0 and SLJIT_R1.
+   Result is placed into SLJIT_R1:SLJIT_R0 (high:low) word */
+#define SLJIT_LMUL_UW			(SLJIT_OP0_BASE + 2)
+/* Flags: - (may destroy flags)
+   Signed multiplication of SLJIT_R0 and SLJIT_R1.
+   Result is placed into SLJIT_R1:SLJIT_R0 (high:low) word */
+#define SLJIT_LMUL_SW			(SLJIT_OP0_BASE + 3)
+/* Flags: I - (may destroy flags)
+   Unsigned divide of the value in SLJIT_R0 by the value in SLJIT_R1.
+   The result is placed into SLJIT_R0 and the remainder into SLJIT_R1.
+   Note: if SLJIT_R1 is 0, the behaviour is undefined. */
+#define SLJIT_DIVMOD_UW			(SLJIT_OP0_BASE + 4)
+#define SLJIT_DIVMOD_U32		(SLJIT_DIVMOD_UW | SLJIT_I32_OP)
+/* Flags: I - (may destroy flags)
+   Signed divide of the value in SLJIT_R0 by the value in SLJIT_R1.
+   The result is placed into SLJIT_R0 and the remainder into SLJIT_R1.
+   Note: if SLJIT_R1 is 0, the behaviour is undefined.
+   Note: if SLJIT_R1 is -1 and SLJIT_R0 is integer min (0x800..00),
+         the behaviour is undefined. */
+#define SLJIT_DIVMOD_SW			(SLJIT_OP0_BASE + 5)
+#define SLJIT_DIVMOD_S32		(SLJIT_DIVMOD_SW | SLJIT_I32_OP)
+/* Flags: I - (may destroy flags)
+   Unsigned divide of the value in SLJIT_R0 by the value in SLJIT_R1.
+   The result is placed into SLJIT_R0. SLJIT_R1 preserves its value.
+   Note: if SLJIT_R1 is 0, the behaviour is undefined. */
+#define SLJIT_DIV_UW			(SLJIT_OP0_BASE + 6)
+#define SLJIT_DIV_U32			(SLJIT_DIV_UW | SLJIT_I32_OP)
+/* Flags: I - (may destroy flags)
+   Signed divide of the value in SLJIT_R0 by the value in SLJIT_R1.
+   The result is placed into SLJIT_R0. SLJIT_R1 preserves its value.
+   Note: if SLJIT_R1 is 0, the behaviour is undefined.
+   Note: if SLJIT_R1 is -1 and SLJIT_R0 is integer min (0x800..00),
+         the behaviour is undefined. */
+#define SLJIT_DIV_SW			(SLJIT_OP0_BASE + 7)
+#define SLJIT_DIV_S32			(SLJIT_DIV_SW | SLJIT_I32_OP)
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_op0(struct sljit_compiler *compiler, sljit_s32 op);
+
+/* Starting index of opcodes for sljit_emit_op1. */
+#define SLJIT_OP1_BASE			32
+
+/* Notes for MOV instructions:
+   U = Mov with update (pre form). If source or destination defined as SLJIT_MEM1(r1)
+       or SLJIT_MEM2(r1, r2), r1 is increased by the sum of r2 and the constant argument
+   UB = unsigned byte (8 bit)
+   SB = signed byte (8 bit)
+   UH = unsigned half (16 bit)
+   SH = signed half (16 bit)
+   UI = unsigned int (32 bit)
+   SI = signed int (32 bit)
+   P  = pointer (sljit_p) size */
+
+/* Flags: - (never set any flags) */
+#define SLJIT_MOV			(SLJIT_OP1_BASE + 0)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOV_U8			(SLJIT_OP1_BASE + 1)
+#define SLJIT_MOV32_U8			(SLJIT_MOV_U8 | SLJIT_I32_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOV_S8			(SLJIT_OP1_BASE + 2)
+#define SLJIT_MOV32_S8			(SLJIT_MOV_S8 | SLJIT_I32_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOV_U16			(SLJIT_OP1_BASE + 3)
+#define SLJIT_MOV32_U16			(SLJIT_MOV_U16 | SLJIT_I32_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOV_S16			(SLJIT_OP1_BASE + 4)
+#define SLJIT_MOV32_S16			(SLJIT_MOV_S16 | SLJIT_I32_OP)
+/* Flags: I - (never set any flags)
+   Note: no SLJIT_MOV32_U32 form, since it is the same as SLJIT_MOV32 */
+#define SLJIT_MOV_U32			(SLJIT_OP1_BASE + 5)
+/* Flags: I - (never set any flags)
+   Note: no SLJIT_MOV32_S32 form, since it is the same as SLJIT_MOV32 */
+#define SLJIT_MOV_S32			(SLJIT_OP1_BASE + 6)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOV32			(SLJIT_MOV_S32 | SLJIT_I32_OP)
+/* Flags: - (never set any flags) */
+#define SLJIT_MOV_P			(SLJIT_OP1_BASE + 7)
+/* Flags: - (never set any flags) */
+#define SLJIT_MOVU			(SLJIT_OP1_BASE + 8)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOVU_U8			(SLJIT_OP1_BASE + 9)
+#define SLJIT_MOVU32_U8			(SLJIT_MOVU_U8 | SLJIT_I32_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOVU_S8			(SLJIT_OP1_BASE + 10)
+#define SLJIT_MOVU32_S8			(SLJIT_MOVU_S8 | SLJIT_I32_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOVU_U16			(SLJIT_OP1_BASE + 11)
+#define SLJIT_MOVU32_U16			(SLJIT_MOVU_U16 | SLJIT_I32_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOVU_S16			(SLJIT_OP1_BASE + 12)
+#define SLJIT_MOVU32_S16		(SLJIT_MOVU_S16 | SLJIT_I32_OP)
+/* Flags: I - (never set any flags)
+   Note: no SLJIT_MOVU32_U32 form, since it is the same as SLJIT_MOVU32 */
+#define SLJIT_MOVU_U32			(SLJIT_OP1_BASE + 13)
+/* Flags: I - (never set any flags)
+   Note: no SLJIT_MOVU32_S32 form, since it is the same as SLJIT_MOVU32 */
+#define SLJIT_MOVU_S32			(SLJIT_OP1_BASE + 14)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOVU32			(SLJIT_MOVU_S32 | SLJIT_I32_OP)
+/* Flags: - (never set any flags) */
+#define SLJIT_MOVU_P			(SLJIT_OP1_BASE + 15)
+/* Flags: I | E | K */
+#define SLJIT_NOT			(SLJIT_OP1_BASE + 16)
+#define SLJIT_NOT32			(SLJIT_NOT | SLJIT_I32_OP)
+/* Flags: I | E | O | K */
+#define SLJIT_NEG			(SLJIT_OP1_BASE + 17)
+#define SLJIT_NEG32			(SLJIT_NEG | SLJIT_I32_OP)
+/* Count leading zeroes
+   Flags: I | E | K
+   Important note! Sparc 32 does not support K flag, since
+   the required popc instruction is introduced only in sparc 64. */
+#define SLJIT_CLZ			(SLJIT_OP1_BASE + 18)
+#define SLJIT_CLZ32			(SLJIT_CLZ | SLJIT_I32_OP)
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_op1(struct sljit_compiler *compiler, sljit_s32 op,
+	sljit_s32 dst, sljit_sw dstw,
+	sljit_s32 src, sljit_sw srcw);
+
+/* Starting index of opcodes for sljit_emit_op2. */
+#define SLJIT_OP2_BASE			96
+
+/* Flags: I | E | O | C | K */
+#define SLJIT_ADD			(SLJIT_OP2_BASE + 0)
+#define SLJIT_ADD32			(SLJIT_ADD | SLJIT_I32_OP)
+/* Flags: I | C | K */
+#define SLJIT_ADDC			(SLJIT_OP2_BASE + 1)
+#define SLJIT_ADDC32			(SLJIT_ADDC | SLJIT_I32_OP)
+/* Flags: I | E | U | S | O | C | K */
+#define SLJIT_SUB			(SLJIT_OP2_BASE + 2)
+#define SLJIT_SUB32			(SLJIT_SUB | SLJIT_I32_OP)
+/* Flags: I | C | K */
+#define SLJIT_SUBC			(SLJIT_OP2_BASE + 3)
+#define SLJIT_SUBC32			(SLJIT_SUBC | SLJIT_I32_OP)
+/* Note: integer mul
+   Flags: I | O (see SLJIT_C_MUL_*) | K */
+#define SLJIT_MUL			(SLJIT_OP2_BASE + 4)
+#define SLJIT_MUL32			(SLJIT_MUL | SLJIT_I32_OP)
+/* Flags: I | E | K */
+#define SLJIT_AND			(SLJIT_OP2_BASE + 5)
+#define SLJIT_AND32			(SLJIT_AND | SLJIT_I32_OP)
+/* Flags: I | E | K */
+#define SLJIT_OR			(SLJIT_OP2_BASE + 6)
+#define SLJIT_OR32			(SLJIT_OR | SLJIT_I32_OP)
+/* Flags: I | E | K */
+#define SLJIT_XOR			(SLJIT_OP2_BASE + 7)
+#define SLJIT_XOR32			(SLJIT_XOR | SLJIT_I32_OP)
+/* Flags: I | E | K
+   Let bit_length be the length of the shift operation: 32 or 64.
+   If src2 is immediate, src2w is masked by (bit_length - 1).
+   Otherwise, if the content of src2 is outside the range from 0
+   to bit_length - 1, the result is undefined. */
+#define SLJIT_SHL			(SLJIT_OP2_BASE + 8)
+#define SLJIT_SHL32			(SLJIT_SHL | SLJIT_I32_OP)
+/* Flags: I | E | K
+   Let bit_length be the length of the shift operation: 32 or 64.
+   If src2 is immediate, src2w is masked by (bit_length - 1).
+   Otherwise, if the content of src2 is outside the range from 0
+   to bit_length - 1, the result is undefined. */
+#define SLJIT_LSHR			(SLJIT_OP2_BASE + 9)
+#define SLJIT_LSHR32			(SLJIT_LSHR | SLJIT_I32_OP)
+/* Flags: I | E | K
+   Let bit_length be the length of the shift operation: 32 or 64.
+   If src2 is immediate, src2w is masked by (bit_length - 1).
+   Otherwise, if the content of src2 is outside the range from 0
+   to bit_length - 1, the result is undefined. */
+#define SLJIT_ASHR			(SLJIT_OP2_BASE + 10)
+#define SLJIT_ASHR32			(SLJIT_ASHR | SLJIT_I32_OP)
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_op2(struct sljit_compiler *compiler, sljit_s32 op,
+	sljit_s32 dst, sljit_sw dstw,
+	sljit_s32 src1, sljit_sw src1w,
+	sljit_s32 src2, sljit_sw src2w);
+
+/* Returns with non-zero if fpu is available. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_is_fpu_available(void);
+
+/* Starting index of opcodes for sljit_emit_fop1. */
+#define SLJIT_FOP1_BASE			128
+
+/* Flags: SP - (never set any flags) */
+#define SLJIT_MOV_F64			(SLJIT_FOP1_BASE + 0)
+#define SLJIT_MOV_F32			(SLJIT_MOV_F64 | SLJIT_F32_OP)
+/* Convert opcodes: CONV[DST_TYPE].FROM[SRC_TYPE]
+   SRC/DST TYPE can be: D - double, S - single, W - signed word, I - signed int
+   Rounding mode when the destination is W or I: round towards zero. */
+/* Flags: SP - (never set any flags) */
+#define SLJIT_CONV_F64_FROM_F32		(SLJIT_FOP1_BASE + 1)
+#define SLJIT_CONV_F32_FROM_F64		(SLJIT_CONV_F64_FROM_F32 | SLJIT_F32_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_CONV_SW_FROM_F64		(SLJIT_FOP1_BASE + 2)
+#define SLJIT_CONV_SW_FROM_F32		(SLJIT_CONV_SW_FROM_F64 | SLJIT_F32_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_CONV_S32_FROM_F64		(SLJIT_FOP1_BASE + 3)
+#define SLJIT_CONV_S32_FROM_F32		(SLJIT_CONV_S32_FROM_F64 | SLJIT_F32_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_CONV_F64_FROM_SW		(SLJIT_FOP1_BASE + 4)
+#define SLJIT_CONV_F32_FROM_SW		(SLJIT_CONV_F64_FROM_SW | SLJIT_F32_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_CONV_F64_FROM_S32		(SLJIT_FOP1_BASE + 5)
+#define SLJIT_CONV_F32_FROM_S32		(SLJIT_CONV_F64_FROM_S32 | SLJIT_F32_OP)
+/* Note: dst is the left and src is the right operand for SLJIT_CMPD.
+   Note: NaN check is always performed. If SLJIT_C_FLOAT_UNORDERED flag
+         is set, the comparison result is unpredictable.
+   Flags: SP | E | S (see SLJIT_C_FLOAT_*) */
+#define SLJIT_CMP_F64			(SLJIT_FOP1_BASE + 6)
+#define SLJIT_CMP_F32			(SLJIT_CMP_F64 | SLJIT_F32_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_NEG_F64			(SLJIT_FOP1_BASE + 7)
+#define SLJIT_NEG_F32			(SLJIT_NEG_F64 | SLJIT_F32_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_ABS_F64			(SLJIT_FOP1_BASE + 8)
+#define SLJIT_ABS_F32			(SLJIT_ABS_F64 | SLJIT_F32_OP)
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_fop1(struct sljit_compiler *compiler, sljit_s32 op,
+	sljit_s32 dst, sljit_sw dstw,
+	sljit_s32 src, sljit_sw srcw);
+
+/* Starting index of opcodes for sljit_emit_fop2. */
+#define SLJIT_FOP2_BASE			160
+
+/* Flags: SP - (never set any flags) */
+#define SLJIT_ADD_F64			(SLJIT_FOP2_BASE + 0)
+#define SLJIT_ADD_F32			(SLJIT_ADD_F64 | SLJIT_F32_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_SUB_F64			(SLJIT_FOP2_BASE + 1)
+#define SLJIT_SUB_F32			(SLJIT_SUB_F64 | SLJIT_F32_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_MUL_F64			(SLJIT_FOP2_BASE + 2)
+#define SLJIT_MUL_F32			(SLJIT_MUL_F64 | SLJIT_F32_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_DIV_F64			(SLJIT_FOP2_BASE + 3)
+#define SLJIT_DIV_F32			(SLJIT_DIV_F64 | SLJIT_F32_OP)
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_fop2(struct sljit_compiler *compiler, sljit_s32 op,
+	sljit_s32 dst, sljit_sw dstw,
+	sljit_s32 src1, sljit_sw src1w,
+	sljit_s32 src2, sljit_sw src2w);
+
+/* Label and jump instructions. */
+
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_label* sljit_emit_label(struct sljit_compiler *compiler);
+
+/* Invert (negate) conditional type: xor (^) with 0x1 */
+
+/* Integer comparison types. */
+#define SLJIT_EQUAL			0
+#define SLJIT_EQUAL32			(SLJIT_EQUAL | SLJIT_I32_OP)
+#define SLJIT_ZERO			0
+#define SLJIT_ZERO32			(SLJIT_ZERO | SLJIT_I32_OP)
+#define SLJIT_NOT_EQUAL			1
+#define SLJIT_NOT_EQUAL32		(SLJIT_NOT_EQUAL | SLJIT_I32_OP)
+#define SLJIT_NOT_ZERO			1
+#define SLJIT_NOT_ZERO32		(SLJIT_NOT_ZERO | SLJIT_I32_OP)
+
+#define SLJIT_LESS			2
+#define SLJIT_LESS32			(SLJIT_LESS | SLJIT_I32_OP)
+#define SLJIT_GREATER_EQUAL		3
+#define SLJIT_GREATER_EQUAL32		(SLJIT_GREATER_EQUAL | SLJIT_I32_OP)
+#define SLJIT_GREATER			4
+#define SLJIT_GREATER32			(SLJIT_GREATER | SLJIT_I32_OP)
+#define SLJIT_LESS_EQUAL		5
+#define SLJIT_LESS_EQUAL32		(SLJIT_LESS_EQUAL | SLJIT_I32_OP)
+#define SLJIT_SIG_LESS			6
+#define SLJIT_SIG_LESS32		(SLJIT_SIG_LESS | SLJIT_I32_OP)
+#define SLJIT_SIG_GREATER_EQUAL		7
+#define SLJIT_SIG_GREATER_EQUAL32	(SLJIT_SIG_GREATER_EQUAL | SLJIT_I32_OP)
+#define SLJIT_SIG_GREATER		8
+#define SLJIT_SIG_GREATER32		(SLJIT_SIG_GREATER | SLJIT_I32_OP)
+#define SLJIT_SIG_LESS_EQUAL		9
+#define SLJIT_SIG_LESS_EQUAL32		(SLJIT_SIG_LESS_EQUAL | SLJIT_I32_OP)
+
+#define SLJIT_OVERFLOW			10
+#define SLJIT_OVERFLOW32		(SLJIT_OVERFLOW | SLJIT_I32_OP)
+#define SLJIT_NOT_OVERFLOW		11
+#define SLJIT_NOT_OVERFLOW32		(SLJIT_NOT_OVERFLOW | SLJIT_I32_OP)
+
+#define SLJIT_MUL_OVERFLOW		12
+#define SLJIT_MUL_OVERFLOW32		(SLJIT_MUL_OVERFLOW | SLJIT_I32_OP)
+#define SLJIT_MUL_NOT_OVERFLOW		13
+#define SLJIT_MUL_NOT_OVERFLOW32	(SLJIT_MUL_NOT_OVERFLOW | SLJIT_I32_OP)
+
+/* Floating point comparison types. */
+#define SLJIT_EQUAL_F64			14
+#define SLJIT_EQUAL_F32			(SLJIT_EQUAL_F64 | SLJIT_F32_OP)
+#define SLJIT_NOT_EQUAL_F64		15
+#define SLJIT_NOT_EQUAL_F32		(SLJIT_NOT_EQUAL_F64 | SLJIT_F32_OP)
+#define SLJIT_LESS_F64			16
+#define SLJIT_LESS_F32			(SLJIT_LESS_F64 | SLJIT_F32_OP)
+#define SLJIT_GREATER_EQUAL_F64		17
+#define SLJIT_GREATER_EQUAL_F32		(SLJIT_GREATER_EQUAL_F64 | SLJIT_F32_OP)
+#define SLJIT_GREATER_F64		18
+#define SLJIT_GREATER_F32		(SLJIT_GREATER_F64 | SLJIT_F32_OP)
+#define SLJIT_LESS_EQUAL_F64		19
+#define SLJIT_LESS_EQUAL_F32		(SLJIT_LESS_EQUAL_F64 | SLJIT_F32_OP)
+#define SLJIT_UNORDERED_F64		20
+#define SLJIT_UNORDERED_F32		(SLJIT_UNORDERED_F64 | SLJIT_F32_OP)
+#define SLJIT_ORDERED_F64		21
+#define SLJIT_ORDERED_F32		(SLJIT_ORDERED_F64 | SLJIT_F32_OP)
+
+/* Unconditional jump types. */
+#define SLJIT_JUMP			22
+#define SLJIT_FAST_CALL			23
+#define SLJIT_CALL0			24
+#define SLJIT_CALL1			25
+#define SLJIT_CALL2			26
+#define SLJIT_CALL3			27
+
+/* Fast calling method. See sljit_emit_fast_enter / sljit_emit_fast_return. */
+
+/* The target can be changed during runtime (see: sljit_set_jump_addr). */
+#define SLJIT_REWRITABLE_JUMP		0x1000
+
+/* Emit a jump instruction. The destination is not set, only the type of the jump.
+    type must be between SLJIT_EQUAL and SLJIT_CALL3
+    type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
+   Flags: - (never set any flags) for both conditional and unconditional jumps.
+   Flags: destroy all flags for calls. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_jump(struct sljit_compiler *compiler, sljit_s32 type);
+
+/* Basic arithmetic comparison. In most architectures it is implemented as
+   an SLJIT_SUB operation (with SLJIT_UNUSED destination and setting
+   appropriate flags) followed by a sljit_emit_jump. However some
+   architectures (i.e: ARM64 or MIPS) may employ special optimizations here.
+   It is suggested to use this comparison form when appropriate.
+    type must be between SLJIT_EQUAL and SLJIT_I_SIG_LESS_EQUAL
+    type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
+   Flags: destroy flags. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_cmp(struct sljit_compiler *compiler, sljit_s32 type,
+	sljit_s32 src1, sljit_sw src1w,
+	sljit_s32 src2, sljit_sw src2w);
+
+/* Basic floating point comparison. In most architectures it is implemented as
+   an SLJIT_FCMP operation (setting appropriate flags) followed by a
+   sljit_emit_jump. However some architectures (i.e: MIPS) may employ
+   special optimizations here. It is suggested to use this comparison form
+   when appropriate.
+    type must be between SLJIT_EQUAL_F64 and SLJIT_ORDERED_F32
+    type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
+   Flags: destroy flags.
+   Note: if either operand is NaN, the behaviour is undefined for
+         types up to SLJIT_S_LESS_EQUAL. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_fcmp(struct sljit_compiler *compiler, sljit_s32 type,
+	sljit_s32 src1, sljit_sw src1w,
+	sljit_s32 src2, sljit_sw src2w);
+
+/* Set the destination of the jump to this label. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_label(struct sljit_jump *jump, struct sljit_label* label);
+/* Set the destination address of the jump to this label. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_target(struct sljit_jump *jump, sljit_uw target);
+
+/* Call function or jump anywhere. Both direct and indirect form
+    type must be between SLJIT_JUMP and SLJIT_CALL3
+    Direct form: set src to SLJIT_IMM() and srcw to the address
+    Indirect form: any other valid addressing mode
+   Flags: - (never set any flags) for unconditional jumps.
+   Flags: destroy all flags for calls. */
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_ijump(struct sljit_compiler *compiler, sljit_s32 type, sljit_s32 src, sljit_sw srcw);
+
+/* Perform the operation using the conditional flags as the second argument.
+   Type must always be between SLJIT_EQUAL and SLJIT_S_ORDERED. The value
+   represented by the type is 1, if the condition represented by the type
+   is fulfilled, and 0 otherwise.
+
+   If op == SLJIT_MOV, SLJIT_MOV_S32, SLJIT_MOV_U32:
+     Set dst to the value represented by the type (0 or 1).
+     Src must be SLJIT_UNUSED, and srcw must be 0
+     Flags: - (never set any flags)
+   If op == SLJIT_OR, op == SLJIT_AND, op == SLJIT_XOR
+     Performs the binary operation using src as the first, and the value
+     represented by type as the second argument.
+     Important note: only dst=src and dstw=srcw is supported at the moment!
+     Flags: I | E | K
+   Note: sljit_emit_op_flags does nothing, if dst is SLJIT_UNUSED (regardless of op). */
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_op_flags(struct sljit_compiler *compiler, sljit_s32 op,
+	sljit_s32 dst, sljit_sw dstw,
+	sljit_s32 src, sljit_sw srcw,
+	sljit_s32 type);
+
+/* Copies the base address of SLJIT_SP + offset to dst.
+   Flags: - (never set any flags) */
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_get_local_base(struct sljit_compiler *compiler, sljit_s32 dst, sljit_sw dstw, sljit_sw offset);
+
+/* The constant can be changed runtime (see: sljit_set_const)
+   Flags: - (never set any flags) */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compiler *compiler, sljit_s32 dst, sljit_sw dstw, sljit_sw init_value);
+
+/* After the code generation the address for label, jump and const instructions
+   are computed. Since these structures are freed by sljit_free_compiler, the
+   addresses must be preserved by the user program elsewere. */
+static SLJIT_INLINE sljit_uw sljit_get_label_addr(struct sljit_label *label) { return label->addr; }
+static SLJIT_INLINE sljit_uw sljit_get_jump_addr(struct sljit_jump *jump) { return jump->addr; }
+static SLJIT_INLINE sljit_uw sljit_get_const_addr(struct sljit_const *const_) { return const_->addr; }
+
+/* Only the address is required to rewrite the code. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_jump_addr(sljit_uw addr, sljit_uw new_addr);
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_const(sljit_uw addr, sljit_sw new_constant);
+
+/* --------------------------------------------------------------------- */
+/*  Miscellaneous utility functions                                      */
+/* --------------------------------------------------------------------- */
+
+#define SLJIT_MAJOR_VERSION	0
+#define SLJIT_MINOR_VERSION	93
+
+/* Get the human readable name of the platform. Can be useful on platforms
+   like ARM, where ARM and Thumb2 functions can be mixed, and
+   it is useful to know the type of the code generator. */
+SLJIT_API_FUNC_ATTRIBUTE const char* sljit_get_platform_name(void);
+
+/* Portable helper function to get an offset of a member. */
+#define SLJIT_OFFSETOF(base, member) ((sljit_sw)(&((base*)0x10)->member) - 0x10)
+
+#if (defined SLJIT_UTIL_GLOBAL_LOCK && SLJIT_UTIL_GLOBAL_LOCK)
+/* This global lock is useful to compile common functions. */
+SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_grab_lock(void);
+SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_release_lock(void);
+#endif
+
+#if (defined SLJIT_UTIL_STACK && SLJIT_UTIL_STACK)
+
+/* The sljit_stack is a utiliy feature of sljit, which allocates a
+   writable memory region between base (inclusive) and limit (exclusive).
+   Both base and limit is a pointer, and base is always <= than limit.
+   This feature uses the "address space reserve" feature
+   of modern operating systems. Basically we don't need to allocate a
+   huge memory block in one step for the worst case, we can start with
+   a smaller chunk and extend it later. Since the address space is
+   reserved, the data never copied to other regions, thus it is safe
+   to store pointers here. */
+
+/* Note: The base field is aligned to PAGE_SIZE bytes (usually 4k or more).
+   Note: stack growing should not happen in small steps: 4k, 16k or even
+     bigger growth is better.
+   Note: this structure may not be supported by all operating systems.
+     Some kind of fallback mechanism is suggested when SLJIT_UTIL_STACK
+     is not defined. */
+
+struct sljit_stack {
+	/* User data, anything can be stored here.
+	   Starting with the same value as base. */
+	sljit_uw top;
+	/* These members are read only. */
+	sljit_uw base;
+	sljit_uw limit;
+	sljit_uw max_limit;
+};
+
+/* Returns NULL if unsuccessful.
+   Note: limit and max_limit contains the size for stack allocation.
+   Note: the top field is initialized to base.
+   Note: see sljit_create_compiler for the explanation of allocator_data. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit, void *allocator_data);
+SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack *stack, void *allocator_data);
+
+/* Can be used to increase (allocate) or decrease (free) the memory area.
+   Returns with a non-zero value if unsuccessful. If new_limit is greater than
+   max_limit, it will fail. It is very easy to implement a stack data structure,
+   since the growth ratio can be added to the current limit, and sljit_stack_resize
+   will do all the necessary checks. The fields of the stack are not changed if
+   sljit_stack_resize fails. */
+SLJIT_API_FUNC_ATTRIBUTE sljit_sw SLJIT_CALL sljit_stack_resize(struct sljit_stack *stack, sljit_uw new_limit);
+
+#endif /* (defined SLJIT_UTIL_STACK && SLJIT_UTIL_STACK) */
+
+#if !(defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL)
+
+/* Get the entry address of a given function. */
+#define SLJIT_FUNC_OFFSET(func_name)	((sljit_sw)func_name)
+
+#else /* !(defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL) */
+
+/* All JIT related code should be placed in the same context (library, binary, etc.). */
+
+#define SLJIT_FUNC_OFFSET(func_name)	(*(sljit_sw*)(void*)func_name)
+
+/* For powerpc64, the function pointers point to a context descriptor. */
+struct sljit_function_context {
+	sljit_sw addr;
+	sljit_sw r2;
+	sljit_sw r11;
+};
+
+/* Fill the context arguments using the addr and the function.
+   If func_ptr is NULL, it will not be set to the address of context
+   If addr is NULL, the function address also comes from the func pointer. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_function_context(void** func_ptr, struct sljit_function_context* context, sljit_sw addr, void* func);
+
+#endif /* !(defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL) */
+
+/* --------------------------------------------------------------------- */
+/*  CPU specific functions                                               */
+/* --------------------------------------------------------------------- */
+
+/* The following function is a helper function for sljit_emit_op_custom.
+   It returns with the real machine register index ( >=0 ) of any SLJIT_R,
+   SLJIT_S and SLJIT_SP registers.
+
+   Note: it returns with -1 for virtual registers (only on x86-32). */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_get_register_index(sljit_s32 reg);
+
+/* The following function is a helper function for sljit_emit_op_custom.
+   It returns with the real machine register index of any SLJIT_FLOAT register.
+
+   Note: the index is always an even number on ARM (except ARM-64), MIPS, and SPARC. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_get_float_register_index(sljit_s32 reg);
+
+/* Any instruction can be inserted into the instruction stream by
+   sljit_emit_op_custom. It has a similar purpose as inline assembly.
+   The size parameter must match to the instruction size of the target
+   architecture:
+
+         x86: 0 < size <= 15. The instruction argument can be byte aligned.
+      Thumb2: if size == 2, the instruction argument must be 2 byte aligned.
+              if size == 4, the instruction argument must be 4 byte aligned.
+   Otherwise: size must be 4 and instruction argument must be 4 byte aligned. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_emit_op_custom(struct sljit_compiler *compiler,
+	void *instruction, sljit_s32 size);
+
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
+
+/* Returns with non-zero if sse2 is available. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_x86_is_sse2_available(void);
+
+/* Returns with non-zero if cmov instruction is available. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_x86_is_cmov_available(void);
+
+/* Emit a conditional mov instruction on x86 CPUs. This instruction
+   moves src to destination, if the condition is satisfied. Unlike
+   other arithmetic instructions, destination must be a register.
+   Before such instructions are emitted, cmov support should be
+   checked by sljit_x86_is_cmov_available function.
+    type must be between SLJIT_EQUAL and SLJIT_S_ORDERED
+    dst_reg must be a valid register and it can be combined
+      with SLJIT_I32_OP to perform 32 bit arithmetic
+   Flags: I - (never set any flags)
+ */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_s32 sljit_x86_emit_cmov(struct sljit_compiler *compiler,
+	sljit_s32 type,
+	sljit_s32 dst_reg,
+	sljit_s32 src, sljit_sw srcw);
+
+#endif
+
+#endif /* _SLJIT_LIR_H_ */