diff options
Diffstat (limited to '.pc/PCRE6_compatible_API.patch/pcretest.c')
| -rw-r--r-- | .pc/PCRE6_compatible_API.patch/pcretest.c | 5709 |
1 files changed, 0 insertions, 5709 deletions
diff --git a/.pc/PCRE6_compatible_API.patch/pcretest.c b/.pc/PCRE6_compatible_API.patch/pcretest.c deleted file mode 100644 index b8dc3c6..0000000 --- a/.pc/PCRE6_compatible_API.patch/pcretest.c +++ /dev/null @@ -1,5709 +0,0 @@ -/************************************************* -* PCRE testing program * -*************************************************/ - -/* This program was hacked up as a tester for PCRE. I really should have -written it more tidily in the first place. Will I ever learn? It has grown and -been extended and consequently is now rather, er, *very* untidy in places. The -addition of 16-bit support has made it even worse. :-( - ------------------------------------------------------------------------------ -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of the University of Cambridge nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. ------------------------------------------------------------------------------ -*/ - -/* This program now supports the testing of all of the 8-bit, 16-bit, and -32-bit PCRE libraries in a single program. This is different from the modules -such as pcre_compile.c in the library itself, which are compiled separately for -each mode. If two modes are enabled, for example, pcre_compile.c is compiled -twice. By contrast, pcretest.c is compiled only once. Therefore, it must not -make use of any of the macros from pcre_internal.h that depend on -COMPILE_PCRE8, COMPILE_PCRE16, or COMPILE_PCRE32. It does, however, make use of -SUPPORT_PCRE8, SUPPORT_PCRE16, and SUPPORT_PCRE32 to ensure that it calls only -supported library functions. */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include <ctype.h> -#include <stdio.h> -#include <string.h> -#include <stdlib.h> -#include <time.h> -#include <locale.h> -#include <errno.h> - -/* Both libreadline and libedit are optionally supported. The user-supplied -original patch uses readline/readline.h for libedit, but in at least one system -it is installed as editline/readline.h, so the configuration code now looks for -that first, falling back to readline/readline.h. */ - -#if defined(SUPPORT_LIBREADLINE) || defined(SUPPORT_LIBEDIT) -#ifdef HAVE_UNISTD_H -#include <unistd.h> -#endif -#if defined(SUPPORT_LIBREADLINE) -#include <readline/readline.h> -#include <readline/history.h> -#else -#if defined(HAVE_EDITLINE_READLINE_H) -#include <editline/readline.h> -#else -#include <readline/readline.h> -#endif -#endif -#endif - -/* A number of things vary for Windows builds. Originally, pcretest opened its -input and output without "b"; then I was told that "b" was needed in some -environments, so it was added for release 5.0 to both the input and output. (It -makes no difference on Unix-like systems.) Later I was told that it is wrong -for the input on Windows. I've now abstracted the modes into two macros that -are set here, to make it easier to fiddle with them, and removed "b" from the -input mode under Windows. */ - -#if defined(_WIN32) || defined(WIN32) -#include <io.h> /* For _setmode() */ -#include <fcntl.h> /* For _O_BINARY */ -#define INPUT_MODE "r" -#define OUTPUT_MODE "wb" - -#ifndef isatty -#define isatty _isatty /* This is what Windows calls them, I'm told, */ -#endif /* though in some environments they seem to */ - /* be already defined, hence the #ifndefs. */ -#ifndef fileno -#define fileno _fileno -#endif - -/* A user sent this fix for Borland Builder 5 under Windows. */ - -#ifdef __BORLANDC__ -#define _setmode(handle, mode) setmode(handle, mode) -#endif - -/* Not Windows */ - -#else -#include <sys/time.h> /* These two includes are needed */ -#include <sys/resource.h> /* for setrlimit(). */ -#if defined NATIVE_ZOS /* z/OS uses non-binary I/O */ -#define INPUT_MODE "r" -#define OUTPUT_MODE "w" -#else -#define INPUT_MODE "rb" -#define OUTPUT_MODE "wb" -#endif -#endif - -#ifdef __VMS -#include <ssdef.h> -void vms_setsymbol( char *, char *, int ); -#endif - - -#define PRIV(name) name - -/* We have to include pcre_internal.h because we need the internal info for -displaying the results of pcre_study() and we also need to know about the -internal macros, structures, and other internal data values; pcretest has -"inside information" compared to a program that strictly follows the PCRE API. - -Although pcre_internal.h does itself include pcre.h, we explicitly include it -here before pcre_internal.h so that the PCRE_EXP_xxx macros get set -appropriately for an application, not for building PCRE. */ - -#include "pcre.h" -#include "pcre_internal.h" - -/* The pcre_printint() function, which prints the internal form of a compiled -regex, is held in a separate file so that (a) it can be compiled in either -8-, 16- or 32-bit mode, and (b) it can be #included directly in pcre_compile.c -when that is compiled in debug mode. */ - -#ifdef SUPPORT_PCRE8 -void pcre_printint(pcre *external_re, FILE *f, BOOL print_lengths); -#endif -#ifdef SUPPORT_PCRE16 -void pcre16_printint(pcre *external_re, FILE *f, BOOL print_lengths); -#endif -#ifdef SUPPORT_PCRE32 -void pcre32_printint(pcre *external_re, FILE *f, BOOL print_lengths); -#endif - -/* We need access to some of the data tables that PCRE uses. So as not to have -to keep two copies, we include the source files here, changing the names of the -external symbols to prevent clashes. */ - -#define PCRE_INCLUDED - -#include "pcre_tables.c" -#include "pcre_ucd.c" - -/* The definition of the macro PRINTABLE, which determines whether to print an -output character as-is or as a hex value when showing compiled patterns, is -the same as in the printint.src file. We uses it here in cases when the locale -has not been explicitly changed, so as to get consistent output from systems -that differ in their output from isprint() even in the "C" locale. */ - -#ifdef EBCDIC -#define PRINTABLE(c) ((c) >= 64 && (c) < 255) -#else -#define PRINTABLE(c) ((c) >= 32 && (c) < 127) -#endif - -#define PRINTOK(c) (locale_set? isprint(c) : PRINTABLE(c)) - -/* Posix support is disabled in 16 or 32 bit only mode. */ -#if !defined SUPPORT_PCRE8 && !defined NOPOSIX -#define NOPOSIX -#endif - -/* It is possible to compile this test program without including support for -testing the POSIX interface, though this is not available via the standard -Makefile. */ - -#if !defined NOPOSIX -#include "pcreposix.h" -#endif - -/* It is also possible, originally for the benefit of a version that was -imported into Exim, to build pcretest without support for UTF8 or UTF16 (define -NOUTF), without the interface to the DFA matcher (NODFA). In fact, we -automatically cut out the UTF support if PCRE is built without it. */ - -#ifndef SUPPORT_UTF -#ifndef NOUTF -#define NOUTF -#endif -#endif - -/* To make the code a bit tidier for 8/16/32-bit support, we define macros -for all the pcre[16]_xxx functions (except pcre16_fullinfo, which is called -only from one place and is handled differently). I couldn't dream up any way of -using a single macro to do this in a generic way, because of the many different -argument requirements. We know that at least one of SUPPORT_PCRE8 and -SUPPORT_PCRE16 must be set. First define macros for each individual mode; then -use these in the definitions of generic macros. - -**** Special note about the PCHARSxxx macros: the address of the string to be -printed is always given as two arguments: a base address followed by an offset. -The base address is cast to the correct data size for 8 or 16 bit data; the -offset is in units of this size. If the string were given as base+offset in one -argument, the casting might be incorrectly applied. */ - -#ifdef SUPPORT_PCRE8 - -#define PCHARS8(lv, p, offset, len, f) \ - lv = pchars((pcre_uint8 *)(p) + offset, len, f) - -#define PCHARSV8(p, offset, len, f) \ - (void)pchars((pcre_uint8 *)(p) + offset, len, f) - -#define READ_CAPTURE_NAME8(p, cn8, cn16, cn32, re) \ - p = read_capture_name8(p, cn8, re) - -#define STRLEN8(p) ((int)strlen((char *)p)) - -#define SET_PCRE_CALLOUT8(callout) \ - pcre_callout = callout - -#define SET_PCRE_STACK_GUARD8(stack_guard) \ - pcre_stack_guard = stack_guard - -#define PCRE_ASSIGN_JIT_STACK8(extra, callback, userdata) \ - pcre_assign_jit_stack(extra, callback, userdata) - -#define PCRE_COMPILE8(re, pat, options, error, erroffset, tables) \ - re = pcre_compile((char *)pat, options, error, erroffset, tables) - -#define PCRE_COPY_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \ - namesptr, cbuffer, size) \ - rc = pcre_copy_named_substring(re, (char *)bptr, offsets, count, \ - (char *)namesptr, cbuffer, size) - -#define PCRE_COPY_SUBSTRING8(rc, bptr, offsets, count, i, cbuffer, size) \ - rc = pcre_copy_substring((char *)bptr, offsets, count, i, cbuffer, size) - -#define PCRE_DFA_EXEC8(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace) \ - count = pcre_dfa_exec(re, extra, (char *)bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace) - -#define PCRE_EXEC8(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets) \ - count = pcre_exec(re, extra, (char *)bptr, len, start_offset, options, \ - offsets, size_offsets) - -#define PCRE_FREE_STUDY8(extra) \ - pcre_free_study(extra) - -#define PCRE_FREE_SUBSTRING8(substring) \ - pcre_free_substring(substring) - -#define PCRE_FREE_SUBSTRING_LIST8(listptr) \ - pcre_free_substring_list(listptr) - -#define PCRE_GET_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \ - getnamesptr, subsptr) \ - rc = pcre_get_named_substring(re, (char *)bptr, offsets, count, \ - (char *)getnamesptr, subsptr) - -#define PCRE_GET_STRINGNUMBER8(n, rc, ptr) \ - n = pcre_get_stringnumber(re, (char *)ptr) - -#define PCRE_GET_SUBSTRING8(rc, bptr, offsets, count, i, subsptr) \ - rc = pcre_get_substring((char *)bptr, offsets, count, i, subsptr) - -#define PCRE_GET_SUBSTRING_LIST8(rc, bptr, offsets, count, listptr) \ - rc = pcre_get_substring_list((const char *)bptr, offsets, count, listptr) - -#define PCRE_PATTERN_TO_HOST_BYTE_ORDER8(rc, re, extra, tables) \ - rc = pcre_pattern_to_host_byte_order(re, extra, tables) - -#define PCRE_PRINTINT8(re, outfile, debug_lengths) \ - pcre_printint(re, outfile, debug_lengths) - -#define PCRE_STUDY8(extra, re, options, error) \ - extra = pcre_study(re, options, error) - -#define PCRE_JIT_STACK_ALLOC8(startsize, maxsize) \ - pcre_jit_stack_alloc(startsize, maxsize) - -#define PCRE_JIT_STACK_FREE8(stack) \ - pcre_jit_stack_free(stack) - -#define pcre8_maketables pcre_maketables - -#endif /* SUPPORT_PCRE8 */ - -/* -----------------------------------------------------------*/ - -#ifdef SUPPORT_PCRE16 - -#define PCHARS16(lv, p, offset, len, f) \ - lv = pchars16((PCRE_SPTR16)(p) + offset, len, f) - -#define PCHARSV16(p, offset, len, f) \ - (void)pchars16((PCRE_SPTR16)(p) + offset, len, f) - -#define READ_CAPTURE_NAME16(p, cn8, cn16, cn32, re) \ - p = read_capture_name16(p, cn16, re) - -#define STRLEN16(p) ((int)strlen16((PCRE_SPTR16)p)) - -#define SET_PCRE_CALLOUT16(callout) \ - pcre16_callout = (int (*)(pcre16_callout_block *))callout - -#define SET_PCRE_STACK_GUARD16(stack_guard) \ - pcre16_stack_guard = (int (*)(void))stack_guard - -#define PCRE_ASSIGN_JIT_STACK16(extra, callback, userdata) \ - pcre16_assign_jit_stack((pcre16_extra *)extra, \ - (pcre16_jit_callback)callback, userdata) - -#define PCRE_COMPILE16(re, pat, options, error, erroffset, tables) \ - re = (pcre *)pcre16_compile((PCRE_SPTR16)pat, options, error, erroffset, \ - tables) - -#define PCRE_COPY_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \ - namesptr, cbuffer, size) \ - rc = pcre16_copy_named_substring((pcre16 *)re, (PCRE_SPTR16)bptr, offsets, \ - count, (PCRE_SPTR16)namesptr, (PCRE_UCHAR16 *)cbuffer, size/2) - -#define PCRE_COPY_SUBSTRING16(rc, bptr, offsets, count, i, cbuffer, size) \ - rc = pcre16_copy_substring((PCRE_SPTR16)bptr, offsets, count, i, \ - (PCRE_UCHAR16 *)cbuffer, size/2) - -#define PCRE_DFA_EXEC16(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace) \ - count = pcre16_dfa_exec((pcre16 *)re, (pcre16_extra *)extra, \ - (PCRE_SPTR16)bptr, len, start_offset, options, offsets, size_offsets, \ - workspace, size_workspace) - -#define PCRE_EXEC16(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets) \ - count = pcre16_exec((pcre16 *)re, (pcre16_extra *)extra, (PCRE_SPTR16)bptr, \ - len, start_offset, options, offsets, size_offsets) - -#define PCRE_FREE_STUDY16(extra) \ - pcre16_free_study((pcre16_extra *)extra) - -#define PCRE_FREE_SUBSTRING16(substring) \ - pcre16_free_substring((PCRE_SPTR16)substring) - -#define PCRE_FREE_SUBSTRING_LIST16(listptr) \ - pcre16_free_substring_list((PCRE_SPTR16 *)listptr) - -#define PCRE_GET_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \ - getnamesptr, subsptr) \ - rc = pcre16_get_named_substring((pcre16 *)re, (PCRE_SPTR16)bptr, offsets, \ - count, (PCRE_SPTR16)getnamesptr, (PCRE_SPTR16 *)(void*)subsptr) - -#define PCRE_GET_STRINGNUMBER16(n, rc, ptr) \ - n = pcre16_get_stringnumber(re, (PCRE_SPTR16)ptr) - -#define PCRE_GET_SUBSTRING16(rc, bptr, offsets, count, i, subsptr) \ - rc = pcre16_get_substring((PCRE_SPTR16)bptr, offsets, count, i, \ - (PCRE_SPTR16 *)(void*)subsptr) - -#define PCRE_GET_SUBSTRING_LIST16(rc, bptr, offsets, count, listptr) \ - rc = pcre16_get_substring_list((PCRE_SPTR16)bptr, offsets, count, \ - (PCRE_SPTR16 **)(void*)listptr) - -#define PCRE_PATTERN_TO_HOST_BYTE_ORDER16(rc, re, extra, tables) \ - rc = pcre16_pattern_to_host_byte_order((pcre16 *)re, (pcre16_extra *)extra, \ - tables) - -#define PCRE_PRINTINT16(re, outfile, debug_lengths) \ - pcre16_printint(re, outfile, debug_lengths) - -#define PCRE_STUDY16(extra, re, options, error) \ - extra = (pcre_extra *)pcre16_study((pcre16 *)re, options, error) - -#define PCRE_JIT_STACK_ALLOC16(startsize, maxsize) \ - (pcre_jit_stack *)pcre16_jit_stack_alloc(startsize, maxsize) - -#define PCRE_JIT_STACK_FREE16(stack) \ - pcre16_jit_stack_free((pcre16_jit_stack *)stack) - -#endif /* SUPPORT_PCRE16 */ - -/* -----------------------------------------------------------*/ - -#ifdef SUPPORT_PCRE32 - -#define PCHARS32(lv, p, offset, len, f) \ - lv = pchars32((PCRE_SPTR32)(p) + offset, len, use_utf, f) - -#define PCHARSV32(p, offset, len, f) \ - (void)pchars32((PCRE_SPTR32)(p) + offset, len, use_utf, f) - -#define READ_CAPTURE_NAME32(p, cn8, cn16, cn32, re) \ - p = read_capture_name32(p, cn32, re) - -#define STRLEN32(p) ((int)strlen32((PCRE_SPTR32)p)) - -#define SET_PCRE_CALLOUT32(callout) \ - pcre32_callout = (int (*)(pcre32_callout_block *))callout - -#define SET_PCRE_STACK_GUARD32(stack_guard) \ - pcre32_stack_guard = (int (*)(void))stack_guard - -#define PCRE_ASSIGN_JIT_STACK32(extra, callback, userdata) \ - pcre32_assign_jit_stack((pcre32_extra *)extra, \ - (pcre32_jit_callback)callback, userdata) - -#define PCRE_COMPILE32(re, pat, options, error, erroffset, tables) \ - re = (pcre *)pcre32_compile((PCRE_SPTR32)pat, options, error, erroffset, \ - tables) - -#define PCRE_COPY_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \ - namesptr, cbuffer, size) \ - rc = pcre32_copy_named_substring((pcre32 *)re, (PCRE_SPTR32)bptr, offsets, \ - count, (PCRE_SPTR32)namesptr, (PCRE_UCHAR32 *)cbuffer, size/2) - -#define PCRE_COPY_SUBSTRING32(rc, bptr, offsets, count, i, cbuffer, size) \ - rc = pcre32_copy_substring((PCRE_SPTR32)bptr, offsets, count, i, \ - (PCRE_UCHAR32 *)cbuffer, size/2) - -#define PCRE_DFA_EXEC32(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace) \ - count = pcre32_dfa_exec((pcre32 *)re, (pcre32_extra *)extra, \ - (PCRE_SPTR32)bptr, len, start_offset, options, offsets, size_offsets, \ - workspace, size_workspace) - -#define PCRE_EXEC32(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets) \ - count = pcre32_exec((pcre32 *)re, (pcre32_extra *)extra, (PCRE_SPTR32)bptr, \ - len, start_offset, options, offsets, size_offsets) - -#define PCRE_FREE_STUDY32(extra) \ - pcre32_free_study((pcre32_extra *)extra) - -#define PCRE_FREE_SUBSTRING32(substring) \ - pcre32_free_substring((PCRE_SPTR32)substring) - -#define PCRE_FREE_SUBSTRING_LIST32(listptr) \ - pcre32_free_substring_list((PCRE_SPTR32 *)listptr) - -#define PCRE_GET_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \ - getnamesptr, subsptr) \ - rc = pcre32_get_named_substring((pcre32 *)re, (PCRE_SPTR32)bptr, offsets, \ - count, (PCRE_SPTR32)getnamesptr, (PCRE_SPTR32 *)(void*)subsptr) - -#define PCRE_GET_STRINGNUMBER32(n, rc, ptr) \ - n = pcre32_get_stringnumber(re, (PCRE_SPTR32)ptr) - -#define PCRE_GET_SUBSTRING32(rc, bptr, offsets, count, i, subsptr) \ - rc = pcre32_get_substring((PCRE_SPTR32)bptr, offsets, count, i, \ - (PCRE_SPTR32 *)(void*)subsptr) - -#define PCRE_GET_SUBSTRING_LIST32(rc, bptr, offsets, count, listptr) \ - rc = pcre32_get_substring_list((PCRE_SPTR32)bptr, offsets, count, \ - (PCRE_SPTR32 **)(void*)listptr) - -#define PCRE_PATTERN_TO_HOST_BYTE_ORDER32(rc, re, extra, tables) \ - rc = pcre32_pattern_to_host_byte_order((pcre32 *)re, (pcre32_extra *)extra, \ - tables) - -#define PCRE_PRINTINT32(re, outfile, debug_lengths) \ - pcre32_printint(re, outfile, debug_lengths) - -#define PCRE_STUDY32(extra, re, options, error) \ - extra = (pcre_extra *)pcre32_study((pcre32 *)re, options, error) - -#define PCRE_JIT_STACK_ALLOC32(startsize, maxsize) \ - (pcre_jit_stack *)pcre32_jit_stack_alloc(startsize, maxsize) - -#define PCRE_JIT_STACK_FREE32(stack) \ - pcre32_jit_stack_free((pcre32_jit_stack *)stack) - -#endif /* SUPPORT_PCRE32 */ - - -/* ----- More than one mode is supported; a runtime test is needed, except for -pcre_config(), and the JIT stack functions, when it doesn't matter which -available version is called. ----- */ - -enum { - PCRE8_MODE, - PCRE16_MODE, - PCRE32_MODE -}; - -#if (defined (SUPPORT_PCRE8) + defined (SUPPORT_PCRE16) + \ - defined (SUPPORT_PCRE32)) >= 2 - -#define CHAR_SIZE (1 << pcre_mode) - -/* There doesn't seem to be an easy way of writing these macros that can cope -with the 3 pairs of bit sizes plus all three bit sizes. So just handle all the -cases separately. */ - -/* ----- All three modes supported ----- */ - -#if defined(SUPPORT_PCRE8) && defined(SUPPORT_PCRE16) && defined(SUPPORT_PCRE32) - -#define PCHARS(lv, p, offset, len, f) \ - if (pcre_mode == PCRE32_MODE) \ - PCHARS32(lv, p, offset, len, f); \ - else if (pcre_mode == PCRE16_MODE) \ - PCHARS16(lv, p, offset, len, f); \ - else \ - PCHARS8(lv, p, offset, len, f) - -#define PCHARSV(p, offset, len, f) \ - if (pcre_mode == PCRE32_MODE) \ - PCHARSV32(p, offset, len, f); \ - else if (pcre_mode == PCRE16_MODE) \ - PCHARSV16(p, offset, len, f); \ - else \ - PCHARSV8(p, offset, len, f) - -#define READ_CAPTURE_NAME(p, cn8, cn16, cn32, re) \ - if (pcre_mode == PCRE32_MODE) \ - READ_CAPTURE_NAME32(p, cn8, cn16, cn32, re); \ - else if (pcre_mode == PCRE16_MODE) \ - READ_CAPTURE_NAME16(p, cn8, cn16, cn32, re); \ - else \ - READ_CAPTURE_NAME8(p, cn8, cn16, cn32, re) - -#define SET_PCRE_CALLOUT(callout) \ - if (pcre_mode == PCRE32_MODE) \ - SET_PCRE_CALLOUT32(callout); \ - else if (pcre_mode == PCRE16_MODE) \ - SET_PCRE_CALLOUT16(callout); \ - else \ - SET_PCRE_CALLOUT8(callout) - -#define SET_PCRE_STACK_GUARD(stack_guard) \ - if (pcre_mode == PCRE32_MODE) \ - SET_PCRE_STACK_GUARD32(stack_guard); \ - else if (pcre_mode == PCRE16_MODE) \ - SET_PCRE_STACK_GUARD16(stack_guard); \ - else \ - SET_PCRE_STACK_GUARD8(stack_guard) - -#define STRLEN(p) (pcre_mode == PCRE32_MODE ? STRLEN32(p) : pcre_mode == PCRE16_MODE ? STRLEN16(p) : STRLEN8(p)) - -#define PCRE_ASSIGN_JIT_STACK(extra, callback, userdata) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_ASSIGN_JIT_STACK32(extra, callback, userdata); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_ASSIGN_JIT_STACK16(extra, callback, userdata); \ - else \ - PCRE_ASSIGN_JIT_STACK8(extra, callback, userdata) - -#define PCRE_COMPILE(re, pat, options, error, erroffset, tables) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_COMPILE32(re, pat, options, error, erroffset, tables); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_COMPILE16(re, pat, options, error, erroffset, tables); \ - else \ - PCRE_COMPILE8(re, pat, options, error, erroffset, tables) - -#define PCRE_CONFIG pcre_config - -#define PCRE_COPY_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \ - namesptr, cbuffer, size) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_COPY_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \ - namesptr, cbuffer, size); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_COPY_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \ - namesptr, cbuffer, size); \ - else \ - PCRE_COPY_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \ - namesptr, cbuffer, size) - -#define PCRE_COPY_SUBSTRING(rc, bptr, offsets, count, i, cbuffer, size) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_COPY_SUBSTRING32(rc, bptr, offsets, count, i, cbuffer, size); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_COPY_SUBSTRING16(rc, bptr, offsets, count, i, cbuffer, size); \ - else \ - PCRE_COPY_SUBSTRING8(rc, bptr, offsets, count, i, cbuffer, size) - -#define PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_DFA_EXEC32(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_DFA_EXEC16(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace); \ - else \ - PCRE_DFA_EXEC8(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace) - -#define PCRE_EXEC(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_EXEC32(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_EXEC16(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets); \ - else \ - PCRE_EXEC8(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets) - -#define PCRE_FREE_STUDY(extra) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_FREE_STUDY32(extra); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_FREE_STUDY16(extra); \ - else \ - PCRE_FREE_STUDY8(extra) - -#define PCRE_FREE_SUBSTRING(substring) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_FREE_SUBSTRING32(substring); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_FREE_SUBSTRING16(substring); \ - else \ - PCRE_FREE_SUBSTRING8(substring) - -#define PCRE_FREE_SUBSTRING_LIST(listptr) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_FREE_SUBSTRING_LIST32(listptr); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_FREE_SUBSTRING_LIST16(listptr); \ - else \ - PCRE_FREE_SUBSTRING_LIST8(listptr) - -#define PCRE_GET_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \ - getnamesptr, subsptr) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_GET_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \ - getnamesptr, subsptr); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_GET_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \ - getnamesptr, subsptr); \ - else \ - PCRE_GET_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \ - getnamesptr, subsptr) - -#define PCRE_GET_STRINGNUMBER(n, rc, ptr) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_GET_STRINGNUMBER32(n, rc, ptr); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_GET_STRINGNUMBER16(n, rc, ptr); \ - else \ - PCRE_GET_STRINGNUMBER8(n, rc, ptr) - -#define PCRE_GET_SUBSTRING(rc, bptr, use_offsets, count, i, subsptr) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_GET_SUBSTRING32(rc, bptr, use_offsets, count, i, subsptr); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_GET_SUBSTRING16(rc, bptr, use_offsets, count, i, subsptr); \ - else \ - PCRE_GET_SUBSTRING8(rc, bptr, use_offsets, count, i, subsptr) - -#define PCRE_GET_SUBSTRING_LIST(rc, bptr, offsets, count, listptr) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_GET_SUBSTRING_LIST32(rc, bptr, offsets, count, listptr); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_GET_SUBSTRING_LIST16(rc, bptr, offsets, count, listptr); \ - else \ - PCRE_GET_SUBSTRING_LIST8(rc, bptr, offsets, count, listptr) - -#define PCRE_JIT_STACK_ALLOC(startsize, maxsize) \ - (pcre_mode == PCRE32_MODE ? \ - PCRE_JIT_STACK_ALLOC32(startsize, maxsize) \ - : pcre_mode == PCRE16_MODE ? \ - PCRE_JIT_STACK_ALLOC16(startsize, maxsize) \ - : PCRE_JIT_STACK_ALLOC8(startsize, maxsize)) - -#define PCRE_JIT_STACK_FREE(stack) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_JIT_STACK_FREE32(stack); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_JIT_STACK_FREE16(stack); \ - else \ - PCRE_JIT_STACK_FREE8(stack) - -#define PCRE_MAKETABLES \ - (pcre_mode == PCRE32_MODE ? pcre32_maketables() : pcre_mode == PCRE16_MODE ? pcre16_maketables() : pcre_maketables()) - -#define PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, tables) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_PATTERN_TO_HOST_BYTE_ORDER32(rc, re, extra, tables); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_PATTERN_TO_HOST_BYTE_ORDER16(rc, re, extra, tables); \ - else \ - PCRE_PATTERN_TO_HOST_BYTE_ORDER8(rc, re, extra, tables) - -#define PCRE_PRINTINT(re, outfile, debug_lengths) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_PRINTINT32(re, outfile, debug_lengths); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_PRINTINT16(re, outfile, debug_lengths); \ - else \ - PCRE_PRINTINT8(re, outfile, debug_lengths) - -#define PCRE_STUDY(extra, re, options, error) \ - if (pcre_mode == PCRE32_MODE) \ - PCRE_STUDY32(extra, re, options, error); \ - else if (pcre_mode == PCRE16_MODE) \ - PCRE_STUDY16(extra, re, options, error); \ - else \ - PCRE_STUDY8(extra, re, options, error) - - -/* ----- Two out of three modes are supported ----- */ - -#else - -/* We can use some macro trickery to make a single set of definitions work in -the three different cases. */ - -/* ----- 32-bit and 16-bit but not 8-bit supported ----- */ - -#if defined(SUPPORT_PCRE32) && defined(SUPPORT_PCRE16) -#define BITONE 32 -#define BITTWO 16 - -/* ----- 32-bit and 8-bit but not 16-bit supported ----- */ - -#elif defined(SUPPORT_PCRE32) && defined(SUPPORT_PCRE8) -#define BITONE 32 -#define BITTWO 8 - -/* ----- 16-bit and 8-bit but not 32-bit supported ----- */ - -#else -#define BITONE 16 -#define BITTWO 8 -#endif - -#define glue(a,b) a##b -#define G(a,b) glue(a,b) - - -/* ----- Common macros for two-mode cases ----- */ - -#define PCHARS(lv, p, offset, len, f) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCHARS,BITONE)(lv, p, offset, len, f); \ - else \ - G(PCHARS,BITTWO)(lv, p, offset, len, f) - -#define PCHARSV(p, offset, len, f) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCHARSV,BITONE)(p, offset, len, f); \ - else \ - G(PCHARSV,BITTWO)(p, offset, len, f) - -#define READ_CAPTURE_NAME(p, cn8, cn16, cn32, re) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(READ_CAPTURE_NAME,BITONE)(p, cn8, cn16, cn32, re); \ - else \ - G(READ_CAPTURE_NAME,BITTWO)(p, cn8, cn16, cn32, re) - -#define SET_PCRE_CALLOUT(callout) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(SET_PCRE_CALLOUT,BITONE)(callout); \ - else \ - G(SET_PCRE_CALLOUT,BITTWO)(callout) - -#define SET_PCRE_STACK_GUARD(stack_guard) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(SET_PCRE_STACK_GUARD,BITONE)(stack_guard); \ - else \ - G(SET_PCRE_STACK_GUARD,BITTWO)(stack_guard) - -#define STRLEN(p) ((pcre_mode == G(G(PCRE,BITONE),_MODE)) ? \ - G(STRLEN,BITONE)(p) : G(STRLEN,BITTWO)(p)) - -#define PCRE_ASSIGN_JIT_STACK(extra, callback, userdata) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_ASSIGN_JIT_STACK,BITONE)(extra, callback, userdata); \ - else \ - G(PCRE_ASSIGN_JIT_STACK,BITTWO)(extra, callback, userdata) - -#define PCRE_COMPILE(re, pat, options, error, erroffset, tables) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_COMPILE,BITONE)(re, pat, options, error, erroffset, tables); \ - else \ - G(PCRE_COMPILE,BITTWO)(re, pat, options, error, erroffset, tables) - -#define PCRE_CONFIG G(G(pcre,BITONE),_config) - -#define PCRE_COPY_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \ - namesptr, cbuffer, size) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_COPY_NAMED_SUBSTRING,BITONE)(rc, re, bptr, offsets, count, \ - namesptr, cbuffer, size); \ - else \ - G(PCRE_COPY_NAMED_SUBSTRING,BITTWO)(rc, re, bptr, offsets, count, \ - namesptr, cbuffer, size) - -#define PCRE_COPY_SUBSTRING(rc, bptr, offsets, count, i, cbuffer, size) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_COPY_SUBSTRING,BITONE)(rc, bptr, offsets, count, i, cbuffer, size); \ - else \ - G(PCRE_COPY_SUBSTRING,BITTWO)(rc, bptr, offsets, count, i, cbuffer, size) - -#define PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_DFA_EXEC,BITONE)(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace); \ - else \ - G(PCRE_DFA_EXEC,BITTWO)(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets, workspace, size_workspace) - -#define PCRE_EXEC(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_EXEC,BITONE)(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets); \ - else \ - G(PCRE_EXEC,BITTWO)(count, re, extra, bptr, len, start_offset, options, \ - offsets, size_offsets) - -#define PCRE_FREE_STUDY(extra) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_FREE_STUDY,BITONE)(extra); \ - else \ - G(PCRE_FREE_STUDY,BITTWO)(extra) - -#define PCRE_FREE_SUBSTRING(substring) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_FREE_SUBSTRING,BITONE)(substring); \ - else \ - G(PCRE_FREE_SUBSTRING,BITTWO)(substring) - -#define PCRE_FREE_SUBSTRING_LIST(listptr) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_FREE_SUBSTRING_LIST,BITONE)(listptr); \ - else \ - G(PCRE_FREE_SUBSTRING_LIST,BITTWO)(listptr) - -#define PCRE_GET_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \ - getnamesptr, subsptr) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_GET_NAMED_SUBSTRING,BITONE)(rc, re, bptr, offsets, count, \ - getnamesptr, subsptr); \ - else \ - G(PCRE_GET_NAMED_SUBSTRING,BITTWO)(rc, re, bptr, offsets, count, \ - getnamesptr, subsptr) - -#define PCRE_GET_STRINGNUMBER(n, rc, ptr) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_GET_STRINGNUMBER,BITONE)(n, rc, ptr); \ - else \ - G(PCRE_GET_STRINGNUMBER,BITTWO)(n, rc, ptr) - -#define PCRE_GET_SUBSTRING(rc, bptr, use_offsets, count, i, subsptr) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_GET_SUBSTRING,BITONE)(rc, bptr, use_offsets, count, i, subsptr); \ - else \ - G(PCRE_GET_SUBSTRING,BITTWO)(rc, bptr, use_offsets, count, i, subsptr) - -#define PCRE_GET_SUBSTRING_LIST(rc, bptr, offsets, count, listptr) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_GET_SUBSTRING_LIST,BITONE)(rc, bptr, offsets, count, listptr); \ - else \ - G(PCRE_GET_SUBSTRING_LIST,BITTWO)(rc, bptr, offsets, count, listptr) - -#define PCRE_JIT_STACK_ALLOC(startsize, maxsize) \ - (pcre_mode == G(G(PCRE,BITONE),_MODE)) ? \ - G(PCRE_JIT_STACK_ALLOC,BITONE)(startsize, maxsize) \ - : G(PCRE_JIT_STACK_ALLOC,BITTWO)(startsize, maxsize) - -#define PCRE_JIT_STACK_FREE(stack) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_JIT_STACK_FREE,BITONE)(stack); \ - else \ - G(PCRE_JIT_STACK_FREE,BITTWO)(stack) - -#define PCRE_MAKETABLES \ - (pcre_mode == G(G(PCRE,BITONE),_MODE)) ? \ - G(G(pcre,BITONE),_maketables)() : G(G(pcre,BITTWO),_maketables)() - -#define PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, tables) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_PATTERN_TO_HOST_BYTE_ORDER,BITONE)(rc, re, extra, tables); \ - else \ - G(PCRE_PATTERN_TO_HOST_BYTE_ORDER,BITTWO)(rc, re, extra, tables) - -#define PCRE_PRINTINT(re, outfile, debug_lengths) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_PRINTINT,BITONE)(re, outfile, debug_lengths); \ - else \ - G(PCRE_PRINTINT,BITTWO)(re, outfile, debug_lengths) - -#define PCRE_STUDY(extra, re, options, error) \ - if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \ - G(PCRE_STUDY,BITONE)(extra, re, options, error); \ - else \ - G(PCRE_STUDY,BITTWO)(extra, re, options, error) - -#endif /* Two out of three modes */ - -/* ----- End of cases where more than one mode is supported ----- */ - - -/* ----- Only 8-bit mode is supported ----- */ - -#elif defined SUPPORT_PCRE8 -#define CHAR_SIZE 1 -#define PCHARS PCHARS8 -#define PCHARSV PCHARSV8 -#define READ_CAPTURE_NAME READ_CAPTURE_NAME8 -#define SET_PCRE_CALLOUT SET_PCRE_CALLOUT8 -#define SET_PCRE_STACK_GUARD SET_PCRE_STACK_GUARD8 -#define STRLEN STRLEN8 -#define PCRE_ASSIGN_JIT_STACK PCRE_ASSIGN_JIT_STACK8 -#define PCRE_COMPILE PCRE_COMPILE8 -#define PCRE_CONFIG pcre_config -#define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING8 -#define PCRE_COPY_SUBSTRING PCRE_COPY_SUBSTRING8 -#define PCRE_DFA_EXEC PCRE_DFA_EXEC8 -#define PCRE_EXEC PCRE_EXEC8 -#define PCRE_FREE_STUDY PCRE_FREE_STUDY8 -#define PCRE_FREE_SUBSTRING PCRE_FREE_SUBSTRING8 -#define PCRE_FREE_SUBSTRING_LIST PCRE_FREE_SUBSTRING_LIST8 -#define PCRE_GET_NAMED_SUBSTRING PCRE_GET_NAMED_SUBSTRING8 -#define PCRE_GET_STRINGNUMBER PCRE_GET_STRINGNUMBER8 -#define PCRE_GET_SUBSTRING PCRE_GET_SUBSTRING8 -#define PCRE_GET_SUBSTRING_LIST PCRE_GET_SUBSTRING_LIST8 -#define PCRE_JIT_STACK_ALLOC PCRE_JIT_STACK_ALLOC8 -#define PCRE_JIT_STACK_FREE PCRE_JIT_STACK_FREE8 -#define PCRE_MAKETABLES pcre_maketables() -#define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER8 -#define PCRE_PRINTINT PCRE_PRINTINT8 -#define PCRE_STUDY PCRE_STUDY8 - -/* ----- Only 16-bit mode is supported ----- */ - -#elif defined SUPPORT_PCRE16 -#define CHAR_SIZE 2 -#define PCHARS PCHARS16 -#define PCHARSV PCHARSV16 -#define READ_CAPTURE_NAME READ_CAPTURE_NAME16 -#define SET_PCRE_CALLOUT SET_PCRE_CALLOUT16 -#define SET_PCRE_STACK_GUARD SET_PCRE_STACK_GUARD16 -#define STRLEN STRLEN16 -#define PCRE_ASSIGN_JIT_STACK PCRE_ASSIGN_JIT_STACK16 -#define PCRE_COMPILE PCRE_COMPILE16 -#define PCRE_CONFIG pcre16_config -#define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING16 -#define PCRE_COPY_SUBSTRING PCRE_COPY_SUBSTRING16 -#define PCRE_DFA_EXEC PCRE_DFA_EXEC16 -#define PCRE_EXEC PCRE_EXEC16 -#define PCRE_FREE_STUDY PCRE_FREE_STUDY16 -#define PCRE_FREE_SUBSTRING PCRE_FREE_SUBSTRING16 -#define PCRE_FREE_SUBSTRING_LIST PCRE_FREE_SUBSTRING_LIST16 -#define PCRE_GET_NAMED_SUBSTRING PCRE_GET_NAMED_SUBSTRING16 -#define PCRE_GET_STRINGNUMBER PCRE_GET_STRINGNUMBER16 -#define PCRE_GET_SUBSTRING PCRE_GET_SUBSTRING16 -#define PCRE_GET_SUBSTRING_LIST PCRE_GET_SUBSTRING_LIST16 -#define PCRE_JIT_STACK_ALLOC PCRE_JIT_STACK_ALLOC16 -#define PCRE_JIT_STACK_FREE PCRE_JIT_STACK_FREE16 -#define PCRE_MAKETABLES pcre16_maketables() -#define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER16 -#define PCRE_PRINTINT PCRE_PRINTINT16 -#define PCRE_STUDY PCRE_STUDY16 - -/* ----- Only 32-bit mode is supported ----- */ - -#elif defined SUPPORT_PCRE32 -#define CHAR_SIZE 4 -#define PCHARS PCHARS32 -#define PCHARSV PCHARSV32 -#define READ_CAPTURE_NAME READ_CAPTURE_NAME32 -#define SET_PCRE_CALLOUT SET_PCRE_CALLOUT32 -#define SET_PCRE_STACK_GUARD SET_PCRE_STACK_GUARD32 -#define STRLEN STRLEN32 -#define PCRE_ASSIGN_JIT_STACK PCRE_ASSIGN_JIT_STACK32 -#define PCRE_COMPILE PCRE_COMPILE32 -#define PCRE_CONFIG pcre32_config -#define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING32 -#define PCRE_COPY_SUBSTRING PCRE_COPY_SUBSTRING32 -#define PCRE_DFA_EXEC PCRE_DFA_EXEC32 -#define PCRE_EXEC PCRE_EXEC32 -#define PCRE_FREE_STUDY PCRE_FREE_STUDY32 -#define PCRE_FREE_SUBSTRING PCRE_FREE_SUBSTRING32 -#define PCRE_FREE_SUBSTRING_LIST PCRE_FREE_SUBSTRING_LIST32 -#define PCRE_GET_NAMED_SUBSTRING PCRE_GET_NAMED_SUBSTRING32 -#define PCRE_GET_STRINGNUMBER PCRE_GET_STRINGNUMBER32 -#define PCRE_GET_SUBSTRING PCRE_GET_SUBSTRING32 -#define PCRE_GET_SUBSTRING_LIST PCRE_GET_SUBSTRING_LIST32 -#define PCRE_JIT_STACK_ALLOC PCRE_JIT_STACK_ALLOC32 -#define PCRE_JIT_STACK_FREE PCRE_JIT_STACK_FREE32 -#define PCRE_MAKETABLES pcre32_maketables() -#define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER32 -#define PCRE_PRINTINT PCRE_PRINTINT32 -#define PCRE_STUDY PCRE_STUDY32 - -#endif - -/* ----- End of mode-specific function call macros ----- */ - - -/* Other parameters */ - -#ifndef CLOCKS_PER_SEC -#ifdef CLK_TCK -#define CLOCKS_PER_SEC CLK_TCK -#else -#define CLOCKS_PER_SEC 100 -#endif -#endif - -#if !defined NODFA -#define DFA_WS_DIMENSION 1000 -#endif - -/* This is the default loop count for timing. */ - -#define LOOPREPEAT 500000 - -/* Static variables */ - -static FILE *outfile; -static int log_store = 0; -static int callout_count; -static int callout_extra; -static int callout_fail_count; -static int callout_fail_id; -static int debug_lengths; -static int first_callout; -static int jit_was_used; -static int locale_set = 0; -static int show_malloc; -static int stack_guard_return; -static int use_utf; -static const unsigned char *last_callout_mark = NULL; - -/* The buffers grow automatically if very long input lines are encountered. */ - -static int buffer_size = 50000; -static pcre_uint8 *buffer = NULL; -static pcre_uint8 *pbuffer = NULL; - -/* Just as a safety check, make sure that COMPILE_PCRE[16|32] are *not* set. */ - -#ifdef COMPILE_PCRE16 -#error COMPILE_PCRE16 must not be set when compiling pcretest.c -#endif - -#ifdef COMPILE_PCRE32 -#error COMPILE_PCRE32 must not be set when compiling pcretest.c -#endif - -/* We need buffers for building 16/32-bit strings, and the tables of operator -lengths that are used for 16/32-bit compiling, in order to swap bytes in a -pattern for saving/reloading testing. Luckily, the data for these tables is -defined as a macro. However, we must ensure that LINK_SIZE and IMM2_SIZE (which -are used in the tables) are adjusted appropriately for the 16/32-bit world. -LINK_SIZE is also used later in this program. */ - -#ifdef SUPPORT_PCRE16 -#undef IMM2_SIZE -#define IMM2_SIZE 1 - -#if LINK_SIZE == 2 -#undef LINK_SIZE -#define LINK_SIZE 1 -#elif LINK_SIZE == 3 || LINK_SIZE == 4 -#undef LINK_SIZE -#define LINK_SIZE 2 -#else -#error LINK_SIZE must be either 2, 3, or 4 -#endif - -static int buffer16_size = 0; -static pcre_uint16 *buffer16 = NULL; -static const pcre_uint16 OP_lengths16[] = { OP_LENGTHS }; -#endif /* SUPPORT_PCRE16 */ - -#ifdef SUPPORT_PCRE32 -#undef IMM2_SIZE -#define IMM2_SIZE 1 -#undef LINK_SIZE -#define LINK_SIZE 1 - -static int buffer32_size = 0; -static pcre_uint32 *buffer32 = NULL; -static const pcre_uint32 OP_lengths32[] = { OP_LENGTHS }; -#endif /* SUPPORT_PCRE32 */ - -/* If we have 8-bit support, default to it; if there is also 16-or 32-bit -support, it can be changed by an option. If there is no 8-bit support, there -must be 16-or 32-bit support, so default it to 1. */ - -#if defined SUPPORT_PCRE8 -static int pcre_mode = PCRE8_MODE; -#elif defined SUPPORT_PCRE16 -static int pcre_mode = PCRE16_MODE; -#elif defined SUPPORT_PCRE32 -static int pcre_mode = PCRE32_MODE; -#endif - -/* JIT study options for -s+n and /S+n where '1' <= n <= '7'. */ - -static int jit_study_bits[] = - { - PCRE_STUDY_JIT_COMPILE, - PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE, - PCRE_STUDY_JIT_COMPILE + PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE, - PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE, - PCRE_STUDY_JIT_COMPILE + PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE, - PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE + PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE, - PCRE_STUDY_JIT_COMPILE + PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE + - PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE -}; - -#define PCRE_STUDY_ALLJIT (PCRE_STUDY_JIT_COMPILE | \ - PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE | PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE) - -/* Textual explanations for runtime error codes */ - -static const char *errtexts[] = { - NULL, /* 0 is no error */ - NULL, /* NOMATCH is handled specially */ - "NULL argument passed", - "bad option value", - "magic number missing", - "unknown opcode - pattern overwritten?", - "no more memory", - NULL, /* never returned by pcre_exec() or pcre_dfa_exec() */ - "match limit exceeded", - "callout error code", - NULL, /* BADUTF8/16 is handled specially */ - NULL, /* BADUTF8/16 offset is handled specially */ - NULL, /* PARTIAL is handled specially */ - "not used - internal error", - "internal error - pattern overwritten?", - "bad count value", - "item unsupported for DFA matching", - "backreference condition or recursion test not supported for DFA matching", - "match limit not supported for DFA matching", - "workspace size exceeded in DFA matching", - "too much recursion for DFA matching", - "recursion limit exceeded", - "not used - internal error", - "invalid combination of newline options", - "bad offset value", - NULL, /* SHORTUTF8/16 is handled specially */ - "nested recursion at the same subject position", - "JIT stack limit reached", - "pattern compiled in wrong mode: 8-bit/16-bit error", - "pattern compiled with other endianness", - "invalid data in workspace for DFA restart", - "bad JIT option", - "bad length" -}; - - -/************************************************* -* Alternate character tables * -*************************************************/ - -/* By default, the "tables" pointer when calling PCRE is set to NULL, thereby -using the default tables of the library. However, the T option can be used to -select alternate sets of tables, for different kinds of testing. Note also that -the L (locale) option also adjusts the tables. */ - -/* This is the set of tables distributed as default with PCRE. It recognizes -only ASCII characters. */ - -static const pcre_uint8 tables0[] = { - -/* This table is a lower casing table. */ - - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 97, 98, 99,100,101,102,103, - 104,105,106,107,108,109,110,111, - 112,113,114,115,116,117,118,119, - 120,121,122, 91, 92, 93, 94, 95, - 96, 97, 98, 99,100,101,102,103, - 104,105,106,107,108,109,110,111, - 112,113,114,115,116,117,118,119, - 120,121,122,123,124,125,126,127, - 128,129,130,131,132,133,134,135, - 136,137,138,139,140,141,142,143, - 144,145,146,147,148,149,150,151, - 152,153,154,155,156,157,158,159, - 160,161,162,163,164,165,166,167, - 168,169,170,171,172,173,174,175, - 176,177,178,179,180,181,182,183, - 184,185,186,187,188,189,190,191, - 192,193,194,195,196,197,198,199, - 200,201,202,203,204,205,206,207, - 208,209,210,211,212,213,214,215, - 216,217,218,219,220,221,222,223, - 224,225,226,227,228,229,230,231, - 232,233,234,235,236,237,238,239, - 240,241,242,243,244,245,246,247, - 248,249,250,251,252,253,254,255, - -/* This table is a case flipping table. */ - - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 97, 98, 99,100,101,102,103, - 104,105,106,107,108,109,110,111, - 112,113,114,115,116,117,118,119, - 120,121,122, 91, 92, 93, 94, 95, - 96, 65, 66, 67, 68, 69, 70, 71, - 72, 73, 74, 75, 76, 77, 78, 79, - 80, 81, 82, 83, 84, 85, 86, 87, - 88, 89, 90,123,124,125,126,127, - 128,129,130,131,132,133,134,135, - 136,137,138,139,140,141,142,143, - 144,145,146,147,148,149,150,151, - 152,153,154,155,156,157,158,159, - 160,161,162,163,164,165,166,167, - 168,169,170,171,172,173,174,175, - 176,177,178,179,180,181,182,183, - 184,185,186,187,188,189,190,191, - 192,193,194,195,196,197,198,199, - 200,201,202,203,204,205,206,207, - 208,209,210,211,212,213,214,215, - 216,217,218,219,220,221,222,223, - 224,225,226,227,228,229,230,231, - 232,233,234,235,236,237,238,239, - 240,241,242,243,244,245,246,247, - 248,249,250,251,252,253,254,255, - -/* This table contains bit maps for various character classes. Each map is 32 -bytes long and the bits run from the least significant end of each byte. The -classes that have their own maps are: space, xdigit, digit, upper, lower, word, -graph, print, punct, and cntrl. Other classes are built from combinations. */ - - 0x00,0x3e,0x00,0x00,0x01,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03, - 0x7e,0x00,0x00,0x00,0x7e,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0xfe,0xff,0xff,0x07,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0x07, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03, - 0xfe,0xff,0xff,0x87,0xfe,0xff,0xff,0x07, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0xff, - 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff, - 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0xfe,0xff,0x00,0xfc, - 0x01,0x00,0x00,0xf8,0x01,0x00,0x00,0x78, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - -/* This table identifies various classes of character by individual bits: - 0x01 white space character - 0x02 letter - 0x04 decimal digit - 0x08 hexadecimal digit - 0x10 alphanumeric or '_' - 0x80 regular expression metacharacter or binary zero -*/ - - 0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 */ - 0x00,0x01,0x01,0x01,0x01,0x01,0x00,0x00, /* 8- 15 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */ - 0x01,0x00,0x00,0x00,0x80,0x00,0x00,0x00, /* - ' */ - 0x80,0x80,0x80,0x80,0x00,0x00,0x80,0x00, /* ( - / */ - 0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /* 0 - 7 */ - 0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x80, /* 8 - ? */ - 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* @ - G */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* H - O */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* P - W */ - 0x12,0x12,0x12,0x80,0x80,0x00,0x80,0x10, /* X - _ */ - 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* ` - g */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* h - o */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* p - w */ - 0x12,0x12,0x12,0x80,0x80,0x00,0x00,0x00, /* x -127 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */ - -/* This is a set of tables that came originally from a Windows user. It seems -to be at least an approximation of ISO 8859. In particular, there are -characters greater than 128 that are marked as spaces, letters, etc. */ - -static const pcre_uint8 tables1[] = { -0,1,2,3,4,5,6,7, -8,9,10,11,12,13,14,15, -16,17,18,19,20,21,22,23, -24,25,26,27,28,29,30,31, -32,33,34,35,36,37,38,39, -40,41,42,43,44,45,46,47, -48,49,50,51,52,53,54,55, -56,57,58,59,60,61,62,63, -64,97,98,99,100,101,102,103, -104,105,106,107,108,109,110,111, -112,113,114,115,116,117,118,119, -120,121,122,91,92,93,94,95, -96,97,98,99,100,101,102,103, -104,105,106,107,108,109,110,111, -112,113,114,115,116,117,118,119, -120,121,122,123,124,125,126,127, -128,129,130,131,132,133,134,135, -136,137,138,139,140,141,142,143, -144,145,146,147,148,149,150,151, -152,153,154,155,156,157,158,159, -160,161,162,163,164,165,166,167, -168,169,170,171,172,173,174,175, -176,177,178,179,180,181,182,183, -184,185,186,187,188,189,190,191, -224,225,226,227,228,229,230,231, -232,233,234,235,236,237,238,239, -240,241,242,243,244,245,246,215, -248,249,250,251,252,253,254,223, -224,225,226,227,228,229,230,231, -232,233,234,235,236,237,238,239, -240,241,242,243,244,245,246,247, -248,249,250,251,252,253,254,255, -0,1,2,3,4,5,6,7, -8,9,10,11,12,13,14,15, -16,17,18,19,20,21,22,23, -24,25,26,27,28,29,30,31, -32,33,34,35,36,37,38,39, -40,41,42,43,44,45,46,47, -48,49,50,51,52,53,54,55, -56,57,58,59,60,61,62,63, -64,97,98,99,100,101,102,103, -104,105,106,107,108,109,110,111, -112,113,114,115,116,117,118,119, -120,121,122,91,92,93,94,95, -96,65,66,67,68,69,70,71, -72,73,74,75,76,77,78,79, -80,81,82,83,84,85,86,87, -88,89,90,123,124,125,126,127, -128,129,130,131,132,133,134,135, -136,137,138,139,140,141,142,143, -144,145,146,147,148,149,150,151, -152,153,154,155,156,157,158,159, -160,161,162,163,164,165,166,167, -168,169,170,171,172,173,174,175, -176,177,178,179,180,181,182,183, -184,185,186,187,188,189,190,191, -224,225,226,227,228,229,230,231, -232,233,234,235,236,237,238,239, -240,241,242,243,244,245,246,215, -248,249,250,251,252,253,254,223, -192,193,194,195,196,197,198,199, -200,201,202,203,204,205,206,207, -208,209,210,211,212,213,214,247, -216,217,218,219,220,221,222,255, -0,62,0,0,1,0,0,0, -0,0,0,0,0,0,0,0, -32,0,0,0,1,0,0,0, -0,0,0,0,0,0,0,0, -0,0,0,0,0,0,255,3, -126,0,0,0,126,0,0,0, -0,0,0,0,0,0,0,0, -0,0,0,0,0,0,0,0, -0,0,0,0,0,0,255,3, -0,0,0,0,0,0,0,0, -0,0,0,0,0,0,12,2, -0,0,0,0,0,0,0,0, -0,0,0,0,0,0,0,0, -254,255,255,7,0,0,0,0, -0,0,0,0,0,0,0,0, -255,255,127,127,0,0,0,0, -0,0,0,0,0,0,0,0, -0,0,0,0,254,255,255,7, -0,0,0,0,0,4,32,4, -0,0,0,128,255,255,127,255, -0,0,0,0,0,0,255,3, -254,255,255,135,254,255,255,7, -0,0,0,0,0,4,44,6, -255,255,127,255,255,255,127,255, -0,0,0,0,254,255,255,255, -255,255,255,255,255,255,255,127, -0,0,0,0,254,255,255,255, -255,255,255,255,255,255,255,255, -0,2,0,0,255,255,255,255, -255,255,255,255,255,255,255,127, -0,0,0,0,255,255,255,255, -255,255,255,255,255,255,255,255, -0,0,0,0,254,255,0,252, -1,0,0,248,1,0,0,120, -0,0,0,0,254,255,255,255, -0,0,128,0,0,0,128,0, -255,255,255,255,0,0,0,0, -0,0,0,0,0,0,0,128, -255,255,255,255,0,0,0,0, -0,0,0,0,0,0,0,0, -128,0,0,0,0,0,0,0, -0,1,1,0,1,1,0,0, -0,0,0,0,0,0,0,0, -0,0,0,0,0,0,0,0, -1,0,0,0,128,0,0,0, -128,128,128,128,0,0,128,0, -28,28,28,28,28,28,28,28, -28,28,0,0,0,0,0,128, -0,26,26,26,26,26,26,18, -18,18,18,18,18,18,18,18, -18,18,18,18,18,18,18,18, -18,18,18,128,128,0,128,16, -0,26,26,26,26,26,26,18, -18,18,18,18,18,18,18,18, -18,18,18,18,18,18,18,18, -18,18,18,128,128,0,0,0, -0,0,0,0,0,1,0,0, -0,0,0,0,0,0,0,0, -0,0,0,0,0,0,0,0, -0,0,0,0,0,0,0,0, -1,0,0,0,0,0,0,0, -0,0,18,0,0,0,0,0, -0,0,20,20,0,18,0,0, -0,20,18,0,0,0,0,0, -18,18,18,18,18,18,18,18, -18,18,18,18,18,18,18,18, -18,18,18,18,18,18,18,0, -18,18,18,18,18,18,18,18, -18,18,18,18,18,18,18,18, -18,18,18,18,18,18,18,18, -18,18,18,18,18,18,18,0, -18,18,18,18,18,18,18,18 -}; - - - - -#ifndef HAVE_STRERROR -/************************************************* -* Provide strerror() for non-ANSI libraries * -*************************************************/ - -/* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror() -in their libraries, but can provide the same facility by this simple -alternative function. */ - -extern int sys_nerr; -extern char *sys_errlist[]; - -char * -strerror(int n) -{ -if (n < 0 || n >= sys_nerr) return "unknown error number"; -return sys_errlist[n]; -} -#endif /* HAVE_STRERROR */ - - - -/************************************************* -* Print newline configuration * -*************************************************/ - -/* -Arguments: - rc the return code from PCRE_CONFIG_NEWLINE - isc TRUE if called from "-C newline" -Returns: nothing -*/ - -static void -print_newline_config(int rc, BOOL isc) -{ -const char *s = NULL; -if (!isc) printf(" Newline sequence is "); -switch(rc) - { - case CHAR_CR: s = "CR"; break; - case CHAR_LF: s = "LF"; break; - case (CHAR_CR<<8 | CHAR_LF): s = "CRLF"; break; - case -1: s = "ANY"; break; - case -2: s = "ANYCRLF"; break; - - default: - printf("a non-standard value: 0x%04x\n", rc); - return; - } - -printf("%s\n", s); -} - - - -/************************************************* -* JIT memory callback * -*************************************************/ - -static pcre_jit_stack* jit_callback(void *arg) -{ -jit_was_used = TRUE; -return (pcre_jit_stack *)arg; -} - - -#if !defined NOUTF || defined SUPPORT_PCRE16 || defined SUPPORT_PCRE32 -/************************************************* -* Convert UTF-8 string to value * -*************************************************/ - -/* This function takes one or more bytes that represents a UTF-8 character, -and returns the value of the character. - -Argument: - utf8bytes a pointer to the byte vector - vptr a pointer to an int to receive the value - -Returns: > 0 => the number of bytes consumed - -6 to 0 => malformed UTF-8 character at offset = (-return) -*/ - -static int -utf82ord(pcre_uint8 *utf8bytes, pcre_uint32 *vptr) -{ -pcre_uint32 c = *utf8bytes++; -pcre_uint32 d = c; -int i, j, s; - -for (i = -1; i < 6; i++) /* i is number of additional bytes */ - { - if ((d & 0x80) == 0) break; - d <<= 1; - } - -if (i == -1) { *vptr = c; return 1; } /* ascii character */ -if (i == 0 || i == 6) return 0; /* invalid UTF-8 */ - -/* i now has a value in the range 1-5 */ - -s = 6*i; -d = (c & utf8_table3[i]) << s; - -for (j = 0; j < i; j++) - { - c = *utf8bytes++; - if ((c & 0xc0) != 0x80) return -(j+1); - s -= 6; - d |= (c & 0x3f) << s; - } - -/* Check that encoding was the correct unique one */ - -for (j = 0; j < utf8_table1_size; j++) - if (d <= (pcre_uint32)utf8_table1[j]) break; -if (j != i) return -(i+1); - -/* Valid value */ - -*vptr = d; -return i+1; -} -#endif /* NOUTF || SUPPORT_PCRE16 */ - - - -#if defined SUPPORT_PCRE8 && !defined NOUTF -/************************************************* -* Convert character value to UTF-8 * -*************************************************/ - -/* This function takes an integer value in the range 0 - 0x7fffffff -and encodes it as a UTF-8 character in 0 to 6 bytes. - -Arguments: - cvalue the character value - utf8bytes pointer to buffer for result - at least 6 bytes long - -Returns: number of characters placed in the buffer -*/ - -static int -ord2utf8(pcre_uint32 cvalue, pcre_uint8 *utf8bytes) -{ -register int i, j; -if (cvalue > 0x7fffffffu) - return -1; -for (i = 0; i < utf8_table1_size; i++) - if (cvalue <= (pcre_uint32)utf8_table1[i]) break; -utf8bytes += i; -for (j = i; j > 0; j--) - { - *utf8bytes-- = 0x80 | (cvalue & 0x3f); - cvalue >>= 6; - } -*utf8bytes = utf8_table2[i] | cvalue; -return i + 1; -} -#endif - - -#ifdef SUPPORT_PCRE16 -/************************************************* -* Convert a string to 16-bit * -*************************************************/ - -/* In non-UTF mode, the space needed for a 16-bit string is exactly double the -8-bit size. For a UTF-8 string, the size needed for UTF-16 is no more than -double, because up to 0xffff uses no more than 3 bytes in UTF-8 but possibly 4 -in UTF-16. Higher values use 4 bytes in UTF-8 and up to 4 bytes in UTF-16. The -result is always left in buffer16. - -Note that this function does not object to surrogate values. This is -deliberate; it makes it possible to construct UTF-16 strings that are invalid, -for the purpose of testing that they are correctly faulted. - -Patterns to be converted are either plain ASCII or UTF-8; data lines are always -in UTF-8 so that values greater than 255 can be handled. - -Arguments: - data TRUE if converting a data line; FALSE for a regex - p points to a byte string - utf true if UTF-8 (to be converted to UTF-16) - len number of bytes in the string (excluding trailing zero) - -Returns: number of 16-bit data items used (excluding trailing zero) - OR -1 if a UTF-8 string is malformed - OR -2 if a value > 0x10ffff is encountered - OR -3 if a value > 0xffff is encountered when not in UTF mode -*/ - -static int -to16(int data, pcre_uint8 *p, int utf, int len) -{ -pcre_uint16 *pp; - -if (buffer16_size < 2*len + 2) - { - if (buffer16 != NULL) free(buffer16); - buffer16_size = 2*len + 2; - buffer16 = (pcre_uint16 *)malloc(buffer16_size); - if (buffer16 == NULL) - { - fprintf(stderr, "pcretest: malloc(%d) failed for buffer16\n", buffer16_size); - exit(1); - } - } - -pp = buffer16; - -if (!utf && !data) - { - while (len-- > 0) *pp++ = *p++; - } - -else - { - pcre_uint32 c = 0; - while (len > 0) - { - int chlen = utf82ord(p, &c); - if (chlen <= 0) return -1; - if (c > 0x10ffff) return -2; - p += chlen; - len -= chlen; - if (c < 0x10000) *pp++ = c; else - { - if (!utf) return -3; - c -= 0x10000; - *pp++ = 0xD800 | (c >> 10); - *pp++ = 0xDC00 | (c & 0x3ff); - } - } - } - -*pp = 0; -return pp - buffer16; -} -#endif - -#ifdef SUPPORT_PCRE32 -/************************************************* -* Convert a string to 32-bit * -*************************************************/ - -/* In non-UTF mode, the space needed for a 32-bit string is exactly four times the -8-bit size. For a UTF-8 string, the size needed for UTF-32 is no more than four -times, because up to 0xffff uses no more than 3 bytes in UTF-8 but possibly 4 -in UTF-32. Higher values use 4 bytes in UTF-8 and up to 4 bytes in UTF-32. The -result is always left in buffer32. - -Note that this function does not object to surrogate values. This is -deliberate; it makes it possible to construct UTF-32 strings that are invalid, -for the purpose of testing that they are correctly faulted. - -Patterns to be converted are either plain ASCII or UTF-8; data lines are always -in UTF-8 so that values greater than 255 can be handled. - -Arguments: - data TRUE if converting a data line; FALSE for a regex - p points to a byte string - utf true if UTF-8 (to be converted to UTF-32) - len number of bytes in the string (excluding trailing zero) - -Returns: number of 32-bit data items used (excluding trailing zero) - OR -1 if a UTF-8 string is malformed - OR -2 if a value > 0x10ffff is encountered - OR -3 if an ill-formed value is encountered (i.e. a surrogate) -*/ - -static int -to32(int data, pcre_uint8 *p, int utf, int len) -{ -pcre_uint32 *pp; - -if (buffer32_size < 4*len + 4) - { - if (buffer32 != NULL) free(buffer32); - buffer32_size = 4*len + 4; - buffer32 = (pcre_uint32 *)malloc(buffer32_size); - if (buffer32 == NULL) - { - fprintf(stderr, "pcretest: malloc(%d) failed for buffer32\n", buffer32_size); - exit(1); - } - } - -pp = buffer32; - -if (!utf && !data) - { - while (len-- > 0) *pp++ = *p++; - } - -else - { - pcre_uint32 c = 0; - while (len > 0) - { - int chlen = utf82ord(p, &c); - if (chlen <= 0) return -1; - if (utf) - { - if (c > 0x10ffff) return -2; - if (!data && (c & 0xfffff800u) == 0xd800u) return -3; - } - - p += chlen; - len -= chlen; - *pp++ = c; - } - } - -*pp = 0; -return pp - buffer32; -} - -/* Check that a 32-bit character string is valid UTF-32. - -Arguments: - string points to the string - length length of string, or -1 if the string is zero-terminated - -Returns: TRUE if the string is a valid UTF-32 string - FALSE otherwise -*/ - -#ifdef NEVER /* Not used */ -#ifdef SUPPORT_UTF -static BOOL -valid_utf32(pcre_uint32 *string, int length) -{ -register pcre_uint32 *p; -register pcre_uint32 c; - -for (p = string; length-- > 0; p++) - { - c = *p; - if (c > 0x10ffffu) return FALSE; /* Too big */ - if ((c & 0xfffff800u) == 0xd800u) return FALSE; /* Surrogate */ - } - -return TRUE; -} -#endif /* SUPPORT_UTF */ -#endif /* NEVER */ -#endif /* SUPPORT_PCRE32 */ - - -/************************************************* -* Read or extend an input line * -*************************************************/ - -/* Input lines are read into buffer, but both patterns and data lines can be -continued over multiple input lines. In addition, if the buffer fills up, we -want to automatically expand it so as to be able to handle extremely large -lines that are needed for certain stress tests. When the input buffer is -expanded, the other two buffers must also be expanded likewise, and the -contents of pbuffer, which are a copy of the input for callouts, must be -preserved (for when expansion happens for a data line). This is not the most -optimal way of handling this, but hey, this is just a test program! - -Arguments: - f the file to read - start where in buffer to start (this *must* be within buffer) - prompt for stdin or readline() - -Returns: pointer to the start of new data - could be a copy of start, or could be moved - NULL if no data read and EOF reached -*/ - -static pcre_uint8 * -extend_inputline(FILE *f, pcre_uint8 *start, const char *prompt) -{ -pcre_uint8 *here = start; - -for (;;) - { - size_t rlen = (size_t)(buffer_size - (here - buffer)); - - if (rlen > 1000) - { - int dlen; - - /* If libreadline or libedit support is required, use readline() to read a - line if the input is a terminal. Note that readline() removes the trailing - newline, so we must put it back again, to be compatible with fgets(). */ - -#if defined(SUPPORT_LIBREADLINE) || defined(SUPPORT_LIBEDIT) - if (isatty(fileno(f))) - { - size_t len; - char *s = readline(prompt); - if (s == NULL) return (here == start)? NULL : start; - len = strlen(s); - if (len > 0) add_history(s); - if (len > rlen - 1) len = rlen - 1; - memcpy(here, s, len); - here[len] = '\n'; - here[len+1] = 0; - free(s); - } - else -#endif - - /* Read the next line by normal means, prompting if the file is stdin. */ - - { - if (f == stdin) printf("%s", prompt); - if (fgets((char *)here, rlen, f) == NULL) - return (here == start)? NULL : start; - } - - dlen = (int)strlen((char *)here); - if (dlen > 0 && here[dlen - 1] == '\n') return start; - here += dlen; - } - - else - { - int new_buffer_size = 2*buffer_size; - pcre_uint8 *new_buffer = (pcre_uint8 *)malloc(new_buffer_size); - pcre_uint8 *new_pbuffer = (pcre_uint8 *)malloc(new_buffer_size); - - if (new_buffer == NULL || new_pbuffer == NULL) - { - fprintf(stderr, "pcretest: malloc(%d) failed\n", new_buffer_size); - exit(1); - } - - memcpy(new_buffer, buffer, buffer_size); - memcpy(new_pbuffer, pbuffer, buffer_size); - - buffer_size = new_buffer_size; - - start = new_buffer + (start - buffer); - here = new_buffer + (here - buffer); - - free(buffer); - free(pbuffer); - - buffer = new_buffer; - pbuffer = new_pbuffer; - } - } - -/* Control never gets here */ -} - - - -/************************************************* -* Read number from string * -*************************************************/ - -/* We don't use strtoul() because SunOS4 doesn't have it. Rather than mess -around with conditional compilation, just do the job by hand. It is only used -for unpicking arguments, so just keep it simple. - -Arguments: - str string to be converted - endptr where to put the end pointer - -Returns: the unsigned long -*/ - -static int -get_value(pcre_uint8 *str, pcre_uint8 **endptr) -{ -int result = 0; -while(*str != 0 && isspace(*str)) str++; -while (isdigit(*str)) result = result * 10 + (int)(*str++ - '0'); -*endptr = str; -return(result); -} - - - -/************************************************* -* Print one character * -*************************************************/ - -/* Print a single character either literally, or as a hex escape. */ - -static int pchar(pcre_uint32 c, FILE *f) -{ -int n = 0; -if (PRINTOK(c)) - { - if (f != NULL) fprintf(f, "%c", c); - return 1; - } - -if (c < 0x100) - { - if (use_utf) - { - if (f != NULL) fprintf(f, "\\x{%02x}", c); - return 6; - } - else - { - if (f != NULL) fprintf(f, "\\x%02x", c); - return 4; - } - } - -if (f != NULL) n = fprintf(f, "\\x{%02x}", c); -return n >= 0 ? n : 0; -} - - - -#ifdef SUPPORT_PCRE8 -/************************************************* -* Print 8-bit character string * -*************************************************/ - -/* Must handle UTF-8 strings in utf8 mode. Yields number of characters printed. -If handed a NULL file, just counts chars without printing. */ - -static int pchars(pcre_uint8 *p, int length, FILE *f) -{ -pcre_uint32 c = 0; -int yield = 0; - -if (length < 0) - length = strlen((char *)p); - -while (length-- > 0) - { -#if !defined NOUTF - if (use_utf) - { - int rc = utf82ord(p, &c); - if (rc > 0 && rc <= length + 1) /* Mustn't run over the end */ - { - length -= rc - 1; - p += rc; - yield += pchar(c, f); - continue; - } - } -#endif - c = *p++; - yield += pchar(c, f); - } - -return yield; -} -#endif - - - -#ifdef SUPPORT_PCRE16 -/************************************************* -* Find length of 0-terminated 16-bit string * -*************************************************/ - -static int strlen16(PCRE_SPTR16 p) -{ -PCRE_SPTR16 pp = p; -while (*pp != 0) pp++; -return (int)(pp - p); -} -#endif /* SUPPORT_PCRE16 */ - - - -#ifdef SUPPORT_PCRE32 -/************************************************* -* Find length of 0-terminated 32-bit string * -*************************************************/ - -static int strlen32(PCRE_SPTR32 p) -{ -PCRE_SPTR32 pp = p; -while (*pp != 0) pp++; -return (int)(pp - p); -} -#endif /* SUPPORT_PCRE32 */ - - - -#ifdef SUPPORT_PCRE16 -/************************************************* -* Print 16-bit character string * -*************************************************/ - -/* Must handle UTF-16 strings in utf mode. Yields number of characters printed. -If handed a NULL file, just counts chars without printing. */ - -static int pchars16(PCRE_SPTR16 p, int length, FILE *f) -{ -int yield = 0; - -if (length < 0) - length = strlen16(p); - -while (length-- > 0) - { - pcre_uint32 c = *p++ & 0xffff; -#if !defined NOUTF - if (use_utf && c >= 0xD800 && c < 0xDC00 && length > 0) - { - int d = *p & 0xffff; - if (d >= 0xDC00 && d <= 0xDFFF) - { - c = ((c & 0x3ff) << 10) + (d & 0x3ff) + 0x10000; - length--; - p++; - } - } -#endif - yield += pchar(c, f); - } - -return yield; -} -#endif /* SUPPORT_PCRE16 */ - - - -#ifdef SUPPORT_PCRE32 -/************************************************* -* Print 32-bit character string * -*************************************************/ - -/* Must handle UTF-32 strings in utf mode. Yields number of characters printed. -If handed a NULL file, just counts chars without printing. */ - -static int pchars32(PCRE_SPTR32 p, int length, BOOL utf, FILE *f) -{ -int yield = 0; - -(void)(utf); /* Avoid compiler warning */ - -if (length < 0) - length = strlen32(p); - -while (length-- > 0) - { - pcre_uint32 c = *p++; - yield += pchar(c, f); - } - -return yield; -} -#endif /* SUPPORT_PCRE32 */ - - - -#ifdef SUPPORT_PCRE8 -/************************************************* -* Read a capture name (8-bit) and check it * -*************************************************/ - -static pcre_uint8 * -read_capture_name8(pcre_uint8 *p, pcre_uint8 **pp, pcre *re) -{ -pcre_uint8 *npp = *pp; -while (isalnum(*p)) *npp++ = *p++; -*npp++ = 0; -*npp = 0; -if (pcre_get_stringnumber(re, (char *)(*pp)) < 0) - { - fprintf(outfile, "no parentheses with name \""); - PCHARSV(*pp, 0, -1, outfile); - fprintf(outfile, "\"\n"); - } - -*pp = npp; -return p; -} -#endif /* SUPPORT_PCRE8 */ - - - -#ifdef SUPPORT_PCRE16 -/************************************************* -* Read a capture name (16-bit) and check it * -*************************************************/ - -/* Note that the text being read is 8-bit. */ - -static pcre_uint8 * -read_capture_name16(pcre_uint8 *p, pcre_uint16 **pp, pcre *re) -{ -pcre_uint16 *npp = *pp; -while (isalnum(*p)) *npp++ = *p++; -*npp++ = 0; -*npp = 0; -if (pcre16_get_stringnumber((pcre16 *)re, (PCRE_SPTR16)(*pp)) < 0) - { - fprintf(outfile, "no parentheses with name \""); - PCHARSV(*pp, 0, -1, outfile); - fprintf(outfile, "\"\n"); - } -*pp = npp; -return p; -} -#endif /* SUPPORT_PCRE16 */ - - - -#ifdef SUPPORT_PCRE32 -/************************************************* -* Read a capture name (32-bit) and check it * -*************************************************/ - -/* Note that the text being read is 8-bit. */ - -static pcre_uint8 * -read_capture_name32(pcre_uint8 *p, pcre_uint32 **pp, pcre *re) -{ -pcre_uint32 *npp = *pp; -while (isalnum(*p)) *npp++ = *p++; -*npp++ = 0; -*npp = 0; -if (pcre32_get_stringnumber((pcre32 *)re, (PCRE_SPTR32)(*pp)) < 0) - { - fprintf(outfile, "no parentheses with name \""); - PCHARSV(*pp, 0, -1, outfile); - fprintf(outfile, "\"\n"); - } -*pp = npp; -return p; -} -#endif /* SUPPORT_PCRE32 */ - - - -/************************************************* -* Stack guard function * -*************************************************/ - -/* Called from PCRE when set in pcre_stack_guard. We give an error (non-zero) -return when a count overflows. */ - -static int stack_guard(void) -{ -return stack_guard_return; -} - -/************************************************* -* Callout function * -*************************************************/ - -/* Called from PCRE as a result of the (?C) item. We print out where we are in -the match. Yield zero unless more callouts than the fail count, or the callout -data is not zero. */ - -static int callout(pcre_callout_block *cb) -{ -FILE *f = (first_callout | callout_extra)? outfile : NULL; -int i, pre_start, post_start, subject_length; - -if (callout_extra) - { - fprintf(f, "Callout %d: last capture = %d\n", - cb->callout_number, cb->capture_last); - - for (i = 0; i < cb->capture_top * 2; i += 2) - { - if (cb->offset_vector[i] < 0) - fprintf(f, "%2d: <unset>\n", i/2); - else - { - fprintf(f, "%2d: ", i/2); - PCHARSV(cb->subject, cb->offset_vector[i], - cb->offset_vector[i+1] - cb->offset_vector[i], f); - fprintf(f, "\n"); - } - } - } - -/* Re-print the subject in canonical form, the first time or if giving full -datails. On subsequent calls in the same match, we use pchars just to find the -printed lengths of the substrings. */ - -if (f != NULL) fprintf(f, "--->"); - -PCHARS(pre_start, cb->subject, 0, cb->start_match, f); -PCHARS(post_start, cb->subject, cb->start_match, - cb->current_position - cb->start_match, f); - -PCHARS(subject_length, cb->subject, 0, cb->subject_length, NULL); - -PCHARSV(cb->subject, cb->current_position, - cb->subject_length - cb->current_position, f); - -if (f != NULL) fprintf(f, "\n"); - -/* Always print appropriate indicators, with callout number if not already -shown. For automatic callouts, show the pattern offset. */ - -if (cb->callout_number == 255) - { - fprintf(outfile, "%+3d ", cb->pattern_position); - if (cb->pattern_position > 99) fprintf(outfile, "\n "); - } -else - { - if (callout_extra) fprintf(outfile, " "); - else fprintf(outfile, "%3d ", cb->callout_number); - } - -for (i = 0; i < pre_start; i++) fprintf(outfile, " "); -fprintf(outfile, "^"); - -if (post_start > 0) - { - for (i = 0; i < post_start - 1; i++) fprintf(outfile, " "); - fprintf(outfile, "^"); - } - -for (i = 0; i < subject_length - pre_start - post_start + 4; i++) - fprintf(outfile, " "); - -fprintf(outfile, "%.*s", (cb->next_item_length == 0)? 1 : cb->next_item_length, - pbuffer + cb->pattern_position); - -fprintf(outfile, "\n"); -first_callout = 0; - -if (cb->mark != last_callout_mark) - { - if (cb->mark == NULL) - fprintf(outfile, "Latest Mark: <unset>\n"); - else - { - fprintf(outfile, "Latest Mark: "); - PCHARSV(cb->mark, 0, -1, outfile); - putc('\n', outfile); - } - last_callout_mark = cb->mark; - } - -if (cb->callout_data != NULL) - { - int callout_data = *((int *)(cb->callout_data)); - if (callout_data != 0) - { - fprintf(outfile, "Callout data = %d\n", callout_data); - return callout_data; - } - } - -return (cb->callout_number != callout_fail_id)? 0 : - (++callout_count >= callout_fail_count)? 1 : 0; -} - - -/************************************************* -* Local malloc functions * -*************************************************/ - -/* Alternative malloc function, to test functionality and save the size of a -compiled re, which is the first store request that pcre_compile() makes. The -show_malloc variable is set only during matching. */ - -static void *new_malloc(size_t size) -{ -void *block = malloc(size); -if (show_malloc) - fprintf(outfile, "malloc %3d %p\n", (int)size, block); -return block; -} - -static void new_free(void *block) -{ -if (show_malloc) - fprintf(outfile, "free %p\n", block); -free(block); -} - -/* For recursion malloc/free, to test stacking calls */ - -static void *stack_malloc(size_t size) -{ -void *block = malloc(size); -if (show_malloc) - fprintf(outfile, "stack_malloc %3d %p\n", (int)size, block); -return block; -} - -static void stack_free(void *block) -{ -if (show_malloc) - fprintf(outfile, "stack_free %p\n", block); -free(block); -} - - -/************************************************* -* Call pcre_fullinfo() * -*************************************************/ - -/* Get one piece of information from the pcre_fullinfo() function. When only -one of 8-, 16- or 32-bit is supported, pcre_mode should always have the correct -value, but the code is defensive. - -Arguments: - re compiled regex - study study data - option PCRE_INFO_xxx option - ptr where to put the data - -Returns: 0 when OK, < 0 on error -*/ - -static int -new_info(pcre *re, pcre_extra *study, int option, void *ptr) -{ -int rc; - -if (pcre_mode == PCRE32_MODE) -#ifdef SUPPORT_PCRE32 - rc = pcre32_fullinfo((pcre32 *)re, (pcre32_extra *)study, option, ptr); -#else - rc = PCRE_ERROR_BADMODE; -#endif -else if (pcre_mode == PCRE16_MODE) -#ifdef SUPPORT_PCRE16 - rc = pcre16_fullinfo((pcre16 *)re, (pcre16_extra *)study, option, ptr); -#else - rc = PCRE_ERROR_BADMODE; -#endif -else -#ifdef SUPPORT_PCRE8 - rc = pcre_fullinfo(re, study, option, ptr); -#else - rc = PCRE_ERROR_BADMODE; -#endif - -if (rc < 0 && rc != PCRE_ERROR_UNSET) - { - fprintf(outfile, "Error %d from pcre%s_fullinfo(%d)\n", rc, - pcre_mode == PCRE32_MODE ? "32" : pcre_mode == PCRE16_MODE ? "16" : "", option); - if (rc == PCRE_ERROR_BADMODE) - fprintf(outfile, "Running in %d-bit mode but pattern was compiled in " - "%d-bit mode\n", 8 * CHAR_SIZE, - 8 * (REAL_PCRE_FLAGS(re) & PCRE_MODE_MASK)); - } - -return rc; -} - - - -/************************************************* -* Swap byte functions * -*************************************************/ - -/* The following functions swap the bytes of a pcre_uint16 and pcre_uint32 -value, respectively. - -Arguments: - value any number - -Returns: the byte swapped value -*/ - -static pcre_uint32 -swap_uint32(pcre_uint32 value) -{ -return ((value & 0x000000ff) << 24) | - ((value & 0x0000ff00) << 8) | - ((value & 0x00ff0000) >> 8) | - (value >> 24); -} - -static pcre_uint16 -swap_uint16(pcre_uint16 value) -{ -return (value >> 8) | (value << 8); -} - - - -/************************************************* -* Flip bytes in a compiled pattern * -*************************************************/ - -/* This function is called if the 'F' option was present on a pattern that is -to be written to a file. We flip the bytes of all the integer fields in the -regex data block and the study block. In 16-bit mode this also flips relevant -bytes in the pattern itself. This is to make it possible to test PCRE's -ability to reload byte-flipped patterns, e.g. those compiled on a different -architecture. */ - -#if defined SUPPORT_PCRE8 || defined SUPPORT_PCRE16 -static void -regexflip8_or_16(pcre *ere, pcre_extra *extra) -{ -real_pcre8_or_16 *re = (real_pcre8_or_16 *)ere; -#ifdef SUPPORT_PCRE16 -int op; -pcre_uint16 *ptr = (pcre_uint16 *)re + re->name_table_offset; -int length = re->name_count * re->name_entry_size; -#ifdef SUPPORT_UTF -BOOL utf = (re->options & PCRE_UTF16) != 0; -BOOL utf16_char = FALSE; -#endif /* SUPPORT_UTF */ -#endif /* SUPPORT_PCRE16 */ - -/* Always flip the bytes in the main data block and study blocks. */ - -re->magic_number = REVERSED_MAGIC_NUMBER; -re->size = swap_uint32(re->size); -re->options = swap_uint32(re->options); -re->flags = swap_uint32(re->flags); -re->limit_match = swap_uint32(re->limit_match); -re->limit_recursion = swap_uint32(re->limit_recursion); -re->first_char = swap_uint16(re->first_char); -re->req_char = swap_uint16(re->req_char); -re->max_lookbehind = swap_uint16(re->max_lookbehind); -re->top_bracket = swap_uint16(re->top_bracket); -re->top_backref = swap_uint16(re->top_backref); -re->name_table_offset = swap_uint16(re->name_table_offset); -re->name_entry_size = swap_uint16(re->name_entry_size); -re->name_count = swap_uint16(re->name_count); -re->ref_count = swap_uint16(re->ref_count); - -if (extra != NULL) - { - pcre_study_data *rsd = (pcre_study_data *)(extra->study_data); - rsd->size = swap_uint32(rsd->size); - rsd->flags = swap_uint32(rsd->flags); - rsd->minlength = swap_uint32(rsd->minlength); - } - -/* In 8-bit mode, that is all we need to do. In 16-bit mode we must swap bytes -in the name table, if present, and then in the pattern itself. */ - -#ifdef SUPPORT_PCRE16 -if (pcre_mode != PCRE16_MODE) return; - -while(TRUE) - { - /* Swap previous characters. */ - while (length-- > 0) - { - *ptr = swap_uint16(*ptr); - ptr++; - } -#ifdef SUPPORT_UTF - if (utf16_char) - { - if ((ptr[-1] & 0xfc00) == 0xd800) - { - /* We know that there is only one extra character in UTF-16. */ - *ptr = swap_uint16(*ptr); - ptr++; - } - } - utf16_char = FALSE; -#endif /* SUPPORT_UTF */ - - /* Get next opcode. */ - - length = 0; - op = *ptr; - *ptr++ = swap_uint16(op); - - switch (op) - { - case OP_END: - return; - -#ifdef SUPPORT_UTF - case OP_CHAR: - case OP_CHARI: - case OP_NOT: - case OP_NOTI: - case OP_STAR: - case OP_MINSTAR: - case OP_PLUS: - case OP_MINPLUS: - case OP_QUERY: - case OP_MINQUERY: - case OP_UPTO: - case OP_MINUPTO: - case OP_EXACT: - case OP_POSSTAR: - case OP_POSPLUS: - case OP_POSQUERY: - case OP_POSUPTO: - case OP_STARI: - case OP_MINSTARI: - case OP_PLUSI: - case OP_MINPLUSI: - case OP_QUERYI: - case OP_MINQUERYI: - case OP_UPTOI: - case OP_MINUPTOI: - case OP_EXACTI: - case OP_POSSTARI: - case OP_POSPLUSI: - case OP_POSQUERYI: - case OP_POSUPTOI: - case OP_NOTSTAR: - case OP_NOTMINSTAR: - case OP_NOTPLUS: - case OP_NOTMINPLUS: - case OP_NOTQUERY: - case OP_NOTMINQUERY: - case OP_NOTUPTO: - case OP_NOTMINUPTO: - case OP_NOTEXACT: - case OP_NOTPOSSTAR: - case OP_NOTPOSPLUS: - case OP_NOTPOSQUERY: - case OP_NOTPOSUPTO: - case OP_NOTSTARI: - case OP_NOTMINSTARI: - case OP_NOTPLUSI: - case OP_NOTMINPLUSI: - case OP_NOTQUERYI: - case OP_NOTMINQUERYI: - case OP_NOTUPTOI: - case OP_NOTMINUPTOI: - case OP_NOTEXACTI: - case OP_NOTPOSSTARI: - case OP_NOTPOSPLUSI: - case OP_NOTPOSQUERYI: - case OP_NOTPOSUPTOI: - if (utf) utf16_char = TRUE; -#endif - /* Fall through. */ - - default: - length = OP_lengths16[op] - 1; - break; - - case OP_CLASS: - case OP_NCLASS: - /* Skip the character bit map. */ - ptr += 32/sizeof(pcre_uint16); - length = 0; - break; - - case OP_XCLASS: - /* LINK_SIZE can be 1 or 2 in 16 bit mode. */ - if (LINK_SIZE > 1) - length = (int)((((unsigned int)(ptr[0]) << 16) | (unsigned int)(ptr[1])) - - (1 + LINK_SIZE + 1)); - else - length = (int)((unsigned int)(ptr[0]) - (1 + LINK_SIZE + 1)); - - /* Reverse the size of the XCLASS instance. */ - *ptr = swap_uint16(*ptr); - ptr++; - if (LINK_SIZE > 1) - { - *ptr = swap_uint16(*ptr); - ptr++; - } - - op = *ptr; - *ptr = swap_uint16(op); - ptr++; - if ((op & XCL_MAP) != 0) - { - /* Skip the character bit map. */ - ptr += 32/sizeof(pcre_uint16); - length -= 32/sizeof(pcre_uint16); - } - break; - } - } -/* Control should never reach here in 16 bit mode. */ -#endif /* SUPPORT_PCRE16 */ -} -#endif /* SUPPORT_PCRE[8|16] */ - - - -#if defined SUPPORT_PCRE32 -static void -regexflip_32(pcre *ere, pcre_extra *extra) -{ -real_pcre32 *re = (real_pcre32 *)ere; -int op; -pcre_uint32 *ptr = (pcre_uint32 *)re + re->name_table_offset; -int length = re->name_count * re->name_entry_size; - -/* Always flip the bytes in the main data block and study blocks. */ - -re->magic_number = REVERSED_MAGIC_NUMBER; -re->size = swap_uint32(re->size); -re->options = swap_uint32(re->options); -re->flags = swap_uint32(re->flags); -re->limit_match = swap_uint32(re->limit_match); -re->limit_recursion = swap_uint32(re->limit_recursion); -re->first_char = swap_uint32(re->first_char); -re->req_char = swap_uint32(re->req_char); -re->max_lookbehind = swap_uint16(re->max_lookbehind); -re->top_bracket = swap_uint16(re->top_bracket); -re->top_backref = swap_uint16(re->top_backref); -re->name_table_offset = swap_uint16(re->name_table_offset); -re->name_entry_size = swap_uint16(re->name_entry_size); -re->name_count = swap_uint16(re->name_count); -re->ref_count = swap_uint16(re->ref_count); - -if (extra != NULL) - { - pcre_study_data *rsd = (pcre_study_data *)(extra->study_data); - rsd->size = swap_uint32(rsd->size); - rsd->flags = swap_uint32(rsd->flags); - rsd->minlength = swap_uint32(rsd->minlength); - } - -/* In 32-bit mode we must swap bytes in the name table, if present, and then in -the pattern itself. */ - -while(TRUE) - { - /* Swap previous characters. */ - while (length-- > 0) - { - *ptr = swap_uint32(*ptr); - ptr++; - } - - /* Get next opcode. */ - - length = 0; - op = *ptr; - *ptr++ = swap_uint32(op); - - switch (op) - { - case OP_END: - return; - - default: - length = OP_lengths32[op] - 1; - break; - - case OP_CLASS: - case OP_NCLASS: - /* Skip the character bit map. */ - ptr += 32/sizeof(pcre_uint32); - length = 0; - break; - - case OP_XCLASS: - /* LINK_SIZE can only be 1 in 32-bit mode. */ - length = (int)((unsigned int)(ptr[0]) - (1 + LINK_SIZE + 1)); - - /* Reverse the size of the XCLASS instance. */ - *ptr = swap_uint32(*ptr); - ptr++; - - op = *ptr; - *ptr = swap_uint32(op); - ptr++; - if ((op & XCL_MAP) != 0) - { - /* Skip the character bit map. */ - ptr += 32/sizeof(pcre_uint32); - length -= 32/sizeof(pcre_uint32); - } - break; - } - } -/* Control should never reach here in 32 bit mode. */ -} - -#endif /* SUPPORT_PCRE32 */ - - - -static void -regexflip(pcre *ere, pcre_extra *extra) -{ -#if defined SUPPORT_PCRE32 - if (REAL_PCRE_FLAGS(ere) & PCRE_MODE32) - regexflip_32(ere, extra); -#endif -#if defined SUPPORT_PCRE8 || defined SUPPORT_PCRE16 - if (REAL_PCRE_FLAGS(ere) & (PCRE_MODE8 | PCRE_MODE16)) - regexflip8_or_16(ere, extra); -#endif -} - - - -/************************************************* -* Check match or recursion limit * -*************************************************/ - -static int -check_match_limit(pcre *re, pcre_extra *extra, pcre_uint8 *bptr, int len, - int start_offset, int options, int *use_offsets, int use_size_offsets, - int flag, unsigned long int *limit, int errnumber, const char *msg) -{ -int count; -int min = 0; -int mid = 64; -int max = -1; - -extra->flags |= flag; - -for (;;) - { - *limit = mid; - - PCRE_EXEC(count, re, extra, bptr, len, start_offset, options, - use_offsets, use_size_offsets); - - if (count == errnumber) - { - /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */ - min = mid; - mid = (mid == max - 1)? max : (max > 0)? (min + max)/2 : mid*2; - } - - else if (count >= 0 || count == PCRE_ERROR_NOMATCH || - count == PCRE_ERROR_PARTIAL) - { - if (mid == min + 1) - { - fprintf(outfile, "Minimum %s limit = %d\n", msg, mid); - break; - } - /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */ - max = mid; - mid = (min + mid)/2; - } - else break; /* Some other error */ - } - -extra->flags &= ~flag; -return count; -} - - - -/************************************************* -* Case-independent strncmp() function * -*************************************************/ - -/* -Arguments: - s first string - t second string - n number of characters to compare - -Returns: < 0, = 0, or > 0, according to the comparison -*/ - -static int -strncmpic(pcre_uint8 *s, pcre_uint8 *t, int n) -{ -while (n--) - { - int c = tolower(*s++) - tolower(*t++); - if (c) return c; - } -return 0; -} - - - -/************************************************* -* Check multicharacter option * -*************************************************/ - -/* This is used both at compile and run-time to check for <xxx> escapes. Print -a message and return 0 if there is no match. - -Arguments: - p points after the leading '<' - f file for error message - nl TRUE to check only for newline settings - stype "modifier" or "escape sequence" - -Returns: appropriate PCRE_NEWLINE_xxx flags, or 0 -*/ - -static int -check_mc_option(pcre_uint8 *p, FILE *f, BOOL nl, const char *stype) -{ -if (strncmpic(p, (pcre_uint8 *)"cr>", 3) == 0) return PCRE_NEWLINE_CR; -if (strncmpic(p, (pcre_uint8 *)"lf>", 3) == 0) return PCRE_NEWLINE_LF; -if (strncmpic(p, (pcre_uint8 *)"crlf>", 5) == 0) return PCRE_NEWLINE_CRLF; -if (strncmpic(p, (pcre_uint8 *)"anycrlf>", 8) == 0) return PCRE_NEWLINE_ANYCRLF; -if (strncmpic(p, (pcre_uint8 *)"any>", 4) == 0) return PCRE_NEWLINE_ANY; -if (strncmpic(p, (pcre_uint8 *)"bsr_anycrlf>", 12) == 0) return PCRE_BSR_ANYCRLF; -if (strncmpic(p, (pcre_uint8 *)"bsr_unicode>", 12) == 0) return PCRE_BSR_UNICODE; - -if (!nl) - { - if (strncmpic(p, (pcre_uint8 *)"JS>", 3) == 0) return PCRE_JAVASCRIPT_COMPAT; - } - -fprintf(f, "Unknown %s at: <%s\n", stype, p); -return 0; -} - - - -/************************************************* -* Usage function * -*************************************************/ - -static void -usage(void) -{ -printf("Usage: pcretest [options] [<input file> [<output file>]]\n\n"); -printf("Input and output default to stdin and stdout.\n"); -#if defined(SUPPORT_LIBREADLINE) || defined(SUPPORT_LIBEDIT) -printf("If input is a terminal, readline() is used to read from it.\n"); -#else -printf("This version of pcretest is not linked with readline().\n"); -#endif -printf("\nOptions:\n"); -#ifdef SUPPORT_PCRE16 -printf(" -16 use the 16-bit library\n"); -#endif -#ifdef SUPPORT_PCRE32 -printf(" -32 use the 32-bit library\n"); -#endif -printf(" -b show compiled code\n"); -printf(" -C show PCRE compile-time options and exit\n"); -printf(" -C arg show a specific compile-time option and exit\n"); -printf(" with its value if numeric (else 0). The arg can be:\n"); -printf(" linksize internal link size [2, 3, 4]\n"); -printf(" pcre8 8 bit library support enabled [0, 1]\n"); -printf(" pcre16 16 bit library support enabled [0, 1]\n"); -printf(" pcre32 32 bit library support enabled [0, 1]\n"); -printf(" utf Unicode Transformation Format supported [0, 1]\n"); -printf(" ucp Unicode Properties supported [0, 1]\n"); -printf(" jit Just-in-time compiler supported [0, 1]\n"); -printf(" newline Newline type [CR, LF, CRLF, ANYCRLF, ANY]\n"); -printf(" bsr \\R type [ANYCRLF, ANY]\n"); -printf(" -d debug: show compiled code and information (-b and -i)\n"); -#if !defined NODFA -printf(" -dfa force DFA matching for all subjects\n"); -#endif -printf(" -help show usage information\n"); -printf(" -i show information about compiled patterns\n" - " -M find MATCH_LIMIT minimum for each subject\n" - " -m output memory used information\n" - " -O set PCRE_NO_AUTO_POSSESS on each pattern\n" - " -o <n> set size of offsets vector to <n>\n"); -#if !defined NOPOSIX -printf(" -p use POSIX interface\n"); -#endif -printf(" -q quiet: do not output PCRE version number at start\n"); -printf(" -S <n> set stack size to <n> megabytes\n"); -printf(" -s force each pattern to be studied at basic level\n" - " -s+ force each pattern to be studied, using JIT if available\n" - " -s++ ditto, verifying when JIT was actually used\n" - " -s+n force each pattern to be studied, using JIT if available,\n" - " where 1 <= n <= 7 selects JIT options\n" - " -s++n ditto, verifying when JIT was actually used\n" - " -t time compilation and execution\n"); -printf(" -t <n> time compilation and execution, repeating <n> times\n"); -printf(" -tm time execution (matching) only\n"); -printf(" -tm <n> time execution (matching) only, repeating <n> times\n"); -printf(" -T same as -t, but show total times at the end\n"); -printf(" -TM same as -tm, but show total time at the end\n"); -} - - - -/************************************************* -* Main Program * -*************************************************/ - -/* Read lines from named file or stdin and write to named file or stdout; lines -consist of a regular expression, in delimiters and optionally followed by -options, followed by a set of test data, terminated by an empty line. */ - -int main(int argc, char **argv) -{ -FILE *infile = stdin; -const char *version; -int options = 0; -int study_options = 0; -int default_find_match_limit = FALSE; -pcre_uint32 default_options = 0; -int op = 1; -int timeit = 0; -int timeitm = 0; -int showtotaltimes = 0; -int showinfo = 0; -int showstore = 0; -int force_study = -1; -int force_study_options = 0; -int quiet = 0; -int size_offsets = 45; -int size_offsets_max; -int *offsets = NULL; -int debug = 0; -int done = 0; -int all_use_dfa = 0; -int verify_jit = 0; -int yield = 0; -int stack_size; -pcre_uint8 *dbuffer = NULL; -pcre_uint8 lockout[24] = { 0 }; -size_t dbuffer_size = 1u << 14; -clock_t total_compile_time = 0; -clock_t total_study_time = 0; -clock_t total_match_time = 0; - -#if !defined NOPOSIX -int posix = 0; -#endif -#if !defined NODFA -int *dfa_workspace = NULL; -#endif - -pcre_jit_stack *jit_stack = NULL; - -/* These vectors store, end-to-end, a list of zero-terminated captured -substring names, each list itself being terminated by an empty name. Assume -that 1024 is plenty long enough for the few names we'll be testing. It is -easiest to keep separate 8-, 16- and 32-bit versions, using the 32-bit version -for the actual memory, to ensure alignment. */ - -pcre_uint32 copynames[1024]; -pcre_uint32 getnames[1024]; - -#ifdef SUPPORT_PCRE32 -pcre_uint32 *cn32ptr; -pcre_uint32 *gn32ptr; -#endif - -#ifdef SUPPORT_PCRE16 -pcre_uint16 *copynames16 = (pcre_uint16 *)copynames; -pcre_uint16 *getnames16 = (pcre_uint16 *)getnames; -pcre_uint16 *cn16ptr; -pcre_uint16 *gn16ptr; -#endif - -#ifdef SUPPORT_PCRE8 -pcre_uint8 *copynames8 = (pcre_uint8 *)copynames; -pcre_uint8 *getnames8 = (pcre_uint8 *)getnames; -pcre_uint8 *cn8ptr; -pcre_uint8 *gn8ptr; -#endif - -/* Get buffers from malloc() so that valgrind will check their misuse when -debugging. They grow automatically when very long lines are read. The 16- -and 32-bit buffers (buffer16, buffer32) are obtained only if needed. */ - -buffer = (pcre_uint8 *)malloc(buffer_size); -pbuffer = (pcre_uint8 *)malloc(buffer_size); - -/* The outfile variable is static so that new_malloc can use it. */ - -outfile = stdout; - -/* The following _setmode() stuff is some Windows magic that tells its runtime -library to translate CRLF into a single LF character. At least, that's what -I've been told: never having used Windows I take this all on trust. Originally -it set 0x8000, but then I was advised that _O_BINARY was better. */ - -#if defined(_WIN32) || defined(WIN32) -_setmode( _fileno( stdout ), _O_BINARY ); -#endif - -/* Get the version number: both pcre_version() and pcre16_version() give the -same answer. We just need to ensure that we call one that is available. */ - -#if defined SUPPORT_PCRE8 -version = pcre_version(); -#elif defined SUPPORT_PCRE16 -version = pcre16_version(); -#elif defined SUPPORT_PCRE32 -version = pcre32_version(); -#endif - -/* Scan options */ - -while (argc > 1 && argv[op][0] == '-') - { - pcre_uint8 *endptr; - char *arg = argv[op]; - - if (strcmp(arg, "-m") == 0) showstore = 1; - else if (strcmp(arg, "-s") == 0) force_study = 0; - - else if (strncmp(arg, "-s+", 3) == 0) - { - arg += 3; - if (*arg == '+') { arg++; verify_jit = TRUE; } - force_study = 1; - if (*arg == 0) - force_study_options = jit_study_bits[6]; - else if (*arg >= '1' && *arg <= '7') - force_study_options = jit_study_bits[*arg - '1']; - else goto BAD_ARG; - } - else if (strcmp(arg, "-8") == 0) - { -#ifdef SUPPORT_PCRE8 - pcre_mode = PCRE8_MODE; -#else - printf("** This version of PCRE was built without 8-bit support\n"); - exit(1); -#endif - } - else if (strcmp(arg, "-16") == 0) - { -#ifdef SUPPORT_PCRE16 - pcre_mode = PCRE16_MODE; -#else - printf("** This version of PCRE was built without 16-bit support\n"); - exit(1); -#endif - } - else if (strcmp(arg, "-32") == 0) - { -#ifdef SUPPORT_PCRE32 - pcre_mode = PCRE32_MODE; -#else - printf("** This version of PCRE was built without 32-bit support\n"); - exit(1); -#endif - } - else if (strcmp(arg, "-q") == 0) quiet = 1; - else if (strcmp(arg, "-b") == 0) debug = 1; - else if (strcmp(arg, "-i") == 0) showinfo = 1; - else if (strcmp(arg, "-d") == 0) showinfo = debug = 1; - else if (strcmp(arg, "-M") == 0) default_find_match_limit = TRUE; - else if (strcmp(arg, "-O") == 0) default_options |= PCRE_NO_AUTO_POSSESS; -#if !defined NODFA - else if (strcmp(arg, "-dfa") == 0) all_use_dfa = 1; -#endif - else if (strcmp(arg, "-o") == 0 && argc > 2 && - ((size_offsets = get_value((pcre_uint8 *)argv[op+1], &endptr)), - *endptr == 0)) - { - op++; - argc--; - } - else if (strcmp(arg, "-t") == 0 || strcmp(arg, "-tm") == 0 || - strcmp(arg, "-T") == 0 || strcmp(arg, "-TM") == 0) - { - int temp; - int both = arg[2] == 0; - showtotaltimes = arg[1] == 'T'; - if (argc > 2 && (temp = get_value((pcre_uint8 *)argv[op+1], &endptr), - *endptr == 0)) - { - timeitm = temp; - op++; - argc--; - } - else timeitm = LOOPREPEAT; - if (both) timeit = timeitm; - } - else if (strcmp(arg, "-S") == 0 && argc > 2 && - ((stack_size = get_value((pcre_uint8 *)argv[op+1], &endptr)), - *endptr == 0)) - { -#if defined(_WIN32) || defined(WIN32) || defined(__minix) || defined(NATIVE_ZOS) || defined(__VMS) - printf("PCRE: -S not supported on this OS\n"); - exit(1); -#else - int rc; - struct rlimit rlim; - getrlimit(RLIMIT_STACK, &rlim); - rlim.rlim_cur = stack_size * 1024 * 1024; - rc = setrlimit(RLIMIT_STACK, &rlim); - if (rc != 0) - { - printf("PCRE: setrlimit() failed with error %d\n", rc); - exit(1); - } - op++; - argc--; -#endif - } -#if !defined NOPOSIX - else if (strcmp(arg, "-p") == 0) posix = 1; -#endif - else if (strcmp(arg, "-C") == 0) - { - int rc; - unsigned long int lrc; - - if (argc > 2) - { - if (strcmp(argv[op + 1], "linksize") == 0) - { - (void)PCRE_CONFIG(PCRE_CONFIG_LINK_SIZE, &rc); - printf("%d\n", rc); - yield = rc; - -#ifdef __VMS - vms_setsymbol("LINKSIZE",0,yield ); -#endif - } - else if (strcmp(argv[op + 1], "pcre8") == 0) - { -#ifdef SUPPORT_PCRE8 - printf("1\n"); - yield = 1; -#else - printf("0\n"); - yield = 0; -#endif -#ifdef __VMS - vms_setsymbol("PCRE8",0,yield ); -#endif - } - else if (strcmp(argv[op + 1], "pcre16") == 0) - { -#ifdef SUPPORT_PCRE16 - printf("1\n"); - yield = 1; -#else - printf("0\n"); - yield = 0; -#endif -#ifdef __VMS - vms_setsymbol("PCRE16",0,yield ); -#endif - } - else if (strcmp(argv[op + 1], "pcre32") == 0) - { -#ifdef SUPPORT_PCRE32 - printf("1\n"); - yield = 1; -#else - printf("0\n"); - yield = 0; -#endif -#ifdef __VMS - vms_setsymbol("PCRE32",0,yield ); -#endif - } - else if (strcmp(argv[op + 1], "utf") == 0) - { -#ifdef SUPPORT_PCRE8 - if (pcre_mode == PCRE8_MODE) - (void)pcre_config(PCRE_CONFIG_UTF8, &rc); -#endif -#ifdef SUPPORT_PCRE16 - if (pcre_mode == PCRE16_MODE) - (void)pcre16_config(PCRE_CONFIG_UTF16, &rc); -#endif -#ifdef SUPPORT_PCRE32 - if (pcre_mode == PCRE32_MODE) - (void)pcre32_config(PCRE_CONFIG_UTF32, &rc); -#endif - printf("%d\n", rc); - yield = rc; -#ifdef __VMS - vms_setsymbol("UTF",0,yield ); -#endif - } - else if (strcmp(argv[op + 1], "ucp") == 0) - { - (void)PCRE_CONFIG(PCRE_CONFIG_UNICODE_PROPERTIES, &rc); - printf("%d\n", rc); - yield = rc; - } - else if (strcmp(argv[op + 1], "jit") == 0) - { - (void)PCRE_CONFIG(PCRE_CONFIG_JIT, &rc); - printf("%d\n", rc); - yield = rc; - } - else if (strcmp(argv[op + 1], "newline") == 0) - { - (void)PCRE_CONFIG(PCRE_CONFIG_NEWLINE, &rc); - print_newline_config(rc, TRUE); - } - else if (strcmp(argv[op + 1], "bsr") == 0) - { - (void)PCRE_CONFIG(PCRE_CONFIG_BSR, &rc); - printf("%s\n", rc? "ANYCRLF" : "ANY"); - } - else if (strcmp(argv[op + 1], "ebcdic") == 0) - { -#ifdef EBCDIC - printf("1\n"); - yield = 1; -#else - printf("0\n"); -#endif - } - else if (strcmp(argv[op + 1], "ebcdic-nl") == 0) - { -#ifdef EBCDIC - printf("0x%02x\n", CHAR_LF); -#else - printf("0\n"); -#endif - } - else - { - printf("Unknown -C option: %s\n", argv[op + 1]); - } - goto EXIT; - } - - /* No argument for -C: output all configuration information. */ - - printf("PCRE version %s\n", version); - printf("Compiled with\n"); - -#ifdef EBCDIC - printf(" EBCDIC code support: LF is 0x%02x\n", CHAR_LF); -#endif - -/* At least one of SUPPORT_PCRE8 and SUPPORT_PCRE16 will be set. If both -are set, either both UTFs are supported or both are not supported. */ - -#ifdef SUPPORT_PCRE8 - printf(" 8-bit support\n"); - (void)pcre_config(PCRE_CONFIG_UTF8, &rc); - printf (" %sUTF-8 support\n", rc ? "" : "No "); -#endif -#ifdef SUPPORT_PCRE16 - printf(" 16-bit support\n"); - (void)pcre16_config(PCRE_CONFIG_UTF16, &rc); - printf (" %sUTF-16 support\n", rc ? "" : "No "); -#endif -#ifdef SUPPORT_PCRE32 - printf(" 32-bit support\n"); - (void)pcre32_config(PCRE_CONFIG_UTF32, &rc); - printf (" %sUTF-32 support\n", rc ? "" : "No "); -#endif - - (void)PCRE_CONFIG(PCRE_CONFIG_UNICODE_PROPERTIES, &rc); - printf(" %sUnicode properties support\n", rc? "" : "No "); - (void)PCRE_CONFIG(PCRE_CONFIG_JIT, &rc); - if (rc) - { - const char *arch; - (void)PCRE_CONFIG(PCRE_CONFIG_JITTARGET, (void *)(&arch)); - printf(" Just-in-time compiler support: %s\n", arch); - } - else - printf(" No just-in-time compiler support\n"); - (void)PCRE_CONFIG(PCRE_CONFIG_NEWLINE, &rc); - print_newline_config(rc, FALSE); - (void)PCRE_CONFIG(PCRE_CONFIG_BSR, &rc); - printf(" \\R matches %s\n", rc? "CR, LF, or CRLF only" : - "all Unicode newlines"); - (void)PCRE_CONFIG(PCRE_CONFIG_LINK_SIZE, &rc); - printf(" Internal link size = %d\n", rc); - (void)PCRE_CONFIG(PCRE_CONFIG_POSIX_MALLOC_THRESHOLD, &rc); - printf(" POSIX malloc threshold = %d\n", rc); - (void)PCRE_CONFIG(PCRE_CONFIG_PARENS_LIMIT, &lrc); - printf(" Parentheses nest limit = %ld\n", lrc); - (void)PCRE_CONFIG(PCRE_CONFIG_MATCH_LIMIT, &lrc); - printf(" Default match limit = %ld\n", lrc); - (void)PCRE_CONFIG(PCRE_CONFIG_MATCH_LIMIT_RECURSION, &lrc); - printf(" Default recursion depth limit = %ld\n", lrc); - (void)PCRE_CONFIG(PCRE_CONFIG_STACKRECURSE, &rc); - printf(" Match recursion uses %s", rc? "stack" : "heap"); - if (showstore) - { - PCRE_EXEC(stack_size, NULL, NULL, NULL, -999, -999, 0, NULL, 0); - printf(": %sframe size = %d bytes", rc? "approximate " : "", -stack_size); - } - printf("\n"); - goto EXIT; - } - else if (strcmp(arg, "-help") == 0 || - strcmp(arg, "--help") == 0) - { - usage(); - goto EXIT; - } - else - { - BAD_ARG: - printf("** Unknown or malformed option %s\n", arg); - usage(); - yield = 1; - goto EXIT; - } - op++; - argc--; - } - -/* Get the store for the offsets vector, and remember what it was */ - -size_offsets_max = size_offsets; -offsets = (int *)malloc(size_offsets_max * sizeof(int)); -if (offsets == NULL) - { - printf("** Failed to get %d bytes of memory for offsets vector\n", - (int)(size_offsets_max * sizeof(int))); - yield = 1; - goto EXIT; - } - -/* Sort out the input and output files */ - -if (argc > 1) - { - infile = fopen(argv[op], INPUT_MODE); - if (infile == NULL) - { - printf("** Failed to open %s\n", argv[op]); - yield = 1; - goto EXIT; - } - } - -if (argc > 2) - { - outfile = fopen(argv[op+1], OUTPUT_MODE); - if (outfile == NULL) - { - printf("** Failed to open %s\n", argv[op+1]); - yield = 1; - goto EXIT; - } - } - -/* Set alternative malloc function */ - -#ifdef SUPPORT_PCRE8 -pcre_malloc = new_malloc; -pcre_free = new_free; -pcre_stack_malloc = stack_malloc; -pcre_stack_free = stack_free; -#endif - -#ifdef SUPPORT_PCRE16 -pcre16_malloc = new_malloc; -pcre16_free = new_free; -pcre16_stack_malloc = stack_malloc; -pcre16_stack_free = stack_free; -#endif - -#ifdef SUPPORT_PCRE32 -pcre32_malloc = new_malloc; -pcre32_free = new_free; -pcre32_stack_malloc = stack_malloc; -pcre32_stack_free = stack_free; -#endif - -/* Heading line unless quiet */ - -if (!quiet) fprintf(outfile, "PCRE version %s\n\n", version); - -/* Main loop */ - -while (!done) - { - pcre *re = NULL; - pcre_extra *extra = NULL; - -#if !defined NOPOSIX /* There are still compilers that require no indent */ - regex_t preg; - int do_posix = 0; -#endif - - const char *error; - pcre_uint8 *markptr; - pcre_uint8 *p, *pp, *ppp; - pcre_uint8 *to_file = NULL; - const pcre_uint8 *tables = NULL; - unsigned long int get_options; - unsigned long int true_size, true_study_size = 0; - size_t size; - int do_allcaps = 0; - int do_mark = 0; - int do_study = 0; - int no_force_study = 0; - int do_debug = debug; - int do_G = 0; - int do_g = 0; - int do_showinfo = showinfo; - int do_showrest = 0; - int do_showcaprest = 0; - int do_flip = 0; - int erroroffset, len, delimiter, poffset; - -#if !defined NODFA - int dfa_matched = 0; -#endif - - use_utf = 0; - debug_lengths = 1; - SET_PCRE_STACK_GUARD(NULL); - - if (extend_inputline(infile, buffer, " re> ") == NULL) break; - if (infile != stdin) fprintf(outfile, "%s", (char *)buffer); - fflush(outfile); - - p = buffer; - while (isspace(*p)) p++; - if (*p == 0) continue; - - /* Handle option lock-out setting */ - - if (*p == '<' && p[1] == ' ') - { - p += 2; - while (isspace(*p)) p++; - if (strncmp((char *)p, "forbid ", 7) == 0) - { - p += 7; - while (isspace(*p)) p++; - pp = lockout; - while (!isspace(*p) && pp < lockout + sizeof(lockout) - 1) - *pp++ = *p++; - *pp = 0; - } - else - { - printf("** Unrecognized special command '%s'\n", p); - yield = 1; - goto EXIT; - } - continue; - } - - /* See if the pattern is to be loaded pre-compiled from a file. */ - - if (*p == '<' && strchr((char *)(p+1), '<') == NULL) - { - pcre_uint32 magic; - pcre_uint8 sbuf[8]; - FILE *f; - - p++; - if (*p == '!') - { - do_debug = TRUE; - do_showinfo = TRUE; - p++; - } - - pp = p + (int)strlen((char *)p); - while (isspace(pp[-1])) pp--; - *pp = 0; - - f = fopen((char *)p, "rb"); - if (f == NULL) - { - fprintf(outfile, "Failed to open %s: %s\n", p, strerror(errno)); - continue; - } - if (fread(sbuf, 1, 8, f) != 8) goto FAIL_READ; - - true_size = - (sbuf[0] << 24) | (sbuf[1] << 16) | (sbuf[2] << 8) | sbuf[3]; - true_study_size = - (sbuf[4] << 24) | (sbuf[5] << 16) | (sbuf[6] << 8) | sbuf[7]; - - re = (pcre *)new_malloc(true_size); - if (re == NULL) - { - printf("** Failed to get %d bytes of memory for pcre object\n", - (int)true_size); - yield = 1; - goto EXIT; - } - if (fread(re, 1, true_size, f) != true_size) goto FAIL_READ; - - magic = REAL_PCRE_MAGIC(re); - if (magic != MAGIC_NUMBER) - { - if (swap_uint32(magic) == MAGIC_NUMBER) - { - do_flip = 1; - } - else - { - fprintf(outfile, "Data in %s is not a compiled PCRE regex\n", p); - new_free(re); - fclose(f); - continue; - } - } - - /* We hide the byte-invert info for little and big endian tests. */ - fprintf(outfile, "Compiled pattern%s loaded from %s\n", - do_flip && (p[-1] == '<') ? " (byte-inverted)" : "", p); - - /* Now see if there is any following study data. */ - - if (true_study_size != 0) - { - pcre_study_data *psd; - - extra = (pcre_extra *)new_malloc(sizeof(pcre_extra) + true_study_size); - extra->flags = PCRE_EXTRA_STUDY_DATA; - - psd = (pcre_study_data *)(((char *)extra) + sizeof(pcre_extra)); - extra->study_data = psd; - - if (fread(psd, 1, true_study_size, f) != true_study_size) - { - FAIL_READ: - fprintf(outfile, "Failed to read data from %s\n", p); - if (extra != NULL) - { - PCRE_FREE_STUDY(extra); - } - new_free(re); - fclose(f); - continue; - } - fprintf(outfile, "Study data loaded from %s\n", p); - do_study = 1; /* To get the data output if requested */ - } - else fprintf(outfile, "No study data\n"); - - /* Flip the necessary bytes. */ - if (do_flip) - { - int rc; - PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, NULL); - if (rc == PCRE_ERROR_BADMODE) - { - pcre_uint32 flags_in_host_byte_order; - if (REAL_PCRE_MAGIC(re) == MAGIC_NUMBER) - flags_in_host_byte_order = REAL_PCRE_FLAGS(re); - else - flags_in_host_byte_order = swap_uint32(REAL_PCRE_FLAGS(re)); - /* Simulate the result of the function call below. */ - fprintf(outfile, "Error %d from pcre%s_fullinfo(%d)\n", rc, - pcre_mode == PCRE32_MODE ? "32" : pcre_mode == PCRE16_MODE ? "16" : "", - PCRE_INFO_OPTIONS); - fprintf(outfile, "Running in %d-bit mode but pattern was compiled in " - "%d-bit mode\n", 8 * CHAR_SIZE, 8 * (flags_in_host_byte_order & PCRE_MODE_MASK)); - new_free(re); - fclose(f); - continue; - } - } - - /* Need to know if UTF-8 for printing data strings. */ - - if (new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options) < 0) - { - new_free(re); - fclose(f); - continue; - } - use_utf = (get_options & PCRE_UTF8) != 0; - - fclose(f); - goto SHOW_INFO; - } - - /* In-line pattern (the usual case). Get the delimiter and seek the end of - the pattern; if it isn't complete, read more. */ - - delimiter = *p++; - - if (isalnum(delimiter) || delimiter == '\\') - { - fprintf(outfile, "** Delimiter must not be alphanumeric or \\\n"); - goto SKIP_DATA; - } - - pp = p; - poffset = (int)(p - buffer); - - for(;;) - { - while (*pp != 0) - { - if (*pp == '\\' && pp[1] != 0) pp++; - else if (*pp == delimiter) break; - pp++; - } - if (*pp != 0) break; - if ((pp = extend_inputline(infile, pp, " > ")) == NULL) - { - fprintf(outfile, "** Unexpected EOF\n"); - done = 1; - goto CONTINUE; - } - if (infile != stdin) fprintf(outfile, "%s", (char *)pp); - } - - /* The buffer may have moved while being extended; reset the start of data - pointer to the correct relative point in the buffer. */ - - p = buffer + poffset; - - /* If the first character after the delimiter is backslash, make - the pattern end with backslash. This is purely to provide a way - of testing for the error message when a pattern ends with backslash. */ - - if (pp[1] == '\\') *pp++ = '\\'; - - /* Terminate the pattern at the delimiter, and save a copy of the pattern - for callouts. */ - - *pp++ = 0; - strcpy((char *)pbuffer, (char *)p); - - /* Look for modifiers and options after the final delimiter. */ - - options = default_options; - study_options = force_study_options; - log_store = showstore; /* default from command line */ - - while (*pp != 0) - { - /* Check to see whether this modifier has been locked out for this file. - This is complicated for the multi-character options that begin with '<'. - If there is no '>' in the lockout string, all multi-character modifiers are - locked out. */ - - if (strchr((char *)lockout, *pp) != NULL) - { - if (*pp == '<' && strchr((char *)lockout, '>') != NULL) - { - int x = check_mc_option(pp+1, outfile, FALSE, "modifier"); - if (x == 0) goto SKIP_DATA; - - for (ppp = lockout; *ppp != 0; ppp++) - { - if (*ppp == '<') - { - int y = check_mc_option(ppp+1, outfile, FALSE, "modifier"); - if (y == 0) - { - printf("** Error in modifier forbid data - giving up.\n"); - yield = 1; - goto EXIT; - } - if (x == y) - { - ppp = pp; - while (*ppp != '>') ppp++; - printf("** The %.*s modifier is locked out - giving up.\n", - (int)(ppp - pp + 1), pp); - yield = 1; - goto EXIT; - } - } - } - } - - /* The single-character modifiers are straightforward. */ - - else - { - printf("** The /%c modifier is locked out - giving up.\n", *pp); - yield = 1; - goto EXIT; - } - } - - /* The modifier is not locked out; handle it. */ - - switch (*pp++) - { - case 'f': options |= PCRE_FIRSTLINE; break; - case 'g': do_g = 1; break; - case 'i': options |= PCRE_CASELESS; break; - case 'm': options |= PCRE_MULTILINE; break; - case 's': options |= PCRE_DOTALL; break; - case 'x': options |= PCRE_EXTENDED; break; - - case '+': - if (do_showrest) do_showcaprest = 1; else do_showrest = 1; - break; - - case '=': do_allcaps = 1; break; - case 'A': options |= PCRE_ANCHORED; break; - case 'B': do_debug = 1; break; - case 'C': options |= PCRE_AUTO_CALLOUT; break; - case 'D': do_debug = do_showinfo = 1; break; - case 'E': options |= PCRE_DOLLAR_ENDONLY; break; - case 'F': do_flip = 1; break; - case 'G': do_G = 1; break; - case 'I': do_showinfo = 1; break; - case 'J': options |= PCRE_DUPNAMES; break; - case 'K': do_mark = 1; break; - case 'M': log_store = 1; break; - case 'N': options |= PCRE_NO_AUTO_CAPTURE; break; - case 'O': options |= PCRE_NO_AUTO_POSSESS; break; - -#if !defined NOPOSIX - case 'P': do_posix = 1; break; -#endif - - case 'Q': - switch (*pp) - { - case '0': - case '1': - stack_guard_return = *pp++ - '0'; - break; - - default: - fprintf(outfile, "** Missing 0 or 1 after /Q\n"); - goto SKIP_DATA; - } - SET_PCRE_STACK_GUARD(stack_guard); - break; - - case 'S': - do_study = 1; - for (;;) - { - switch (*pp++) - { - case 'S': - do_study = 0; - no_force_study = 1; - break; - - case '!': - study_options |= PCRE_STUDY_EXTRA_NEEDED; - break; - - case '+': - if (*pp == '+') - { - verify_jit = TRUE; - pp++; - } - if (*pp >= '1' && *pp <= '7') - study_options |= jit_study_bits[*pp++ - '1']; - else - study_options |= jit_study_bits[6]; - break; - - case '-': - study_options &= ~PCRE_STUDY_ALLJIT; - break; - - default: - pp--; - goto ENDLOOP; - } - } - ENDLOOP: - break; - - case 'U': options |= PCRE_UNGREEDY; break; - case 'W': options |= PCRE_UCP; break; - case 'X': options |= PCRE_EXTRA; break; - case 'Y': options |= PCRE_NO_START_OPTIMISE; break; - case 'Z': debug_lengths = 0; break; - case '8': options |= PCRE_UTF8; use_utf = 1; break; - case '9': options |= PCRE_NEVER_UTF; break; - case '?': options |= PCRE_NO_UTF8_CHECK; break; - - case 'T': - switch (*pp++) - { - case '0': tables = tables0; break; - case '1': tables = tables1; break; - - case '\r': - case '\n': - case ' ': - case 0: - fprintf(outfile, "** Missing table number after /T\n"); - goto SKIP_DATA; - - default: - fprintf(outfile, "** Bad table number \"%c\" after /T\n", pp[-1]); - goto SKIP_DATA; - } - break; - - case 'L': - ppp = pp; - /* The '\r' test here is so that it works on Windows. */ - /* The '0' test is just in case this is an unterminated line. */ - while (*ppp != 0 && *ppp != '\n' && *ppp != '\r' && *ppp != ' ') ppp++; - *ppp = 0; - if (setlocale(LC_CTYPE, (const char *)pp) == NULL) - { - fprintf(outfile, "** Failed to set locale \"%s\"\n", pp); - goto SKIP_DATA; - } - locale_set = 1; - tables = PCRE_MAKETABLES; - pp = ppp; - break; - - case '>': - to_file = pp; - while (*pp != 0) pp++; - while (isspace(pp[-1])) pp--; - *pp = 0; - break; - - case '<': - { - int x = check_mc_option(pp, outfile, FALSE, "modifier"); - if (x == 0) goto SKIP_DATA; - options |= x; - while (*pp++ != '>'); - } - break; - - case '\r': /* So that it works in Windows */ - case '\n': - case ' ': - break; - - default: - fprintf(outfile, "** Unknown modifier '%c'\n", pp[-1]); - goto SKIP_DATA; - } - } - - /* Handle compiling via the POSIX interface, which doesn't support the - timing, showing, or debugging options, nor the ability to pass over - local character tables. Neither does it have 16-bit support. */ - -#if !defined NOPOSIX - if (posix || do_posix) - { - int rc; - int cflags = 0; - - if ((options & PCRE_CASELESS) != 0) cflags |= REG_ICASE; - if ((options & PCRE_MULTILINE) != 0) cflags |= REG_NEWLINE; - if ((options & PCRE_DOTALL) != 0) cflags |= REG_DOTALL; - if ((options & PCRE_NO_AUTO_CAPTURE) != 0) cflags |= REG_NOSUB; - if ((options & PCRE_UTF8) != 0) cflags |= REG_UTF8; - if ((options & PCRE_UCP) != 0) cflags |= REG_UCP; - if ((options & PCRE_UNGREEDY) != 0) cflags |= REG_UNGREEDY; - - rc = regcomp(&preg, (char *)p, cflags); - - /* Compilation failed; go back for another re, skipping to blank line - if non-interactive. */ - - if (rc != 0) - { - (void)regerror(rc, &preg, (char *)buffer, buffer_size); - fprintf(outfile, "Failed: POSIX code %d: %s\n", rc, buffer); - goto SKIP_DATA; - } - } - - /* Handle compiling via the native interface */ - - else -#endif /* !defined NOPOSIX */ - - { - /* In 16- or 32-bit mode, convert the input. */ - -#ifdef SUPPORT_PCRE16 - if (pcre_mode == PCRE16_MODE) - { - switch(to16(FALSE, p, options & PCRE_UTF8, (int)strlen((char *)p))) - { - case -1: - fprintf(outfile, "**Failed: invalid UTF-8 string cannot be " - "converted to UTF-16\n"); - goto SKIP_DATA; - - case -2: - fprintf(outfile, "**Failed: character value greater than 0x10ffff " - "cannot be converted to UTF-16\n"); - goto SKIP_DATA; - - case -3: /* "Impossible error" when to16 is called arg1 FALSE */ - fprintf(outfile, "**Failed: character value greater than 0xffff " - "cannot be converted to 16-bit in non-UTF mode\n"); - goto SKIP_DATA; - - default: - break; - } - p = (pcre_uint8 *)buffer16; - } -#endif - -#ifdef SUPPORT_PCRE32 - if (pcre_mode == PCRE32_MODE) - { - switch(to32(FALSE, p, options & PCRE_UTF32, (int)strlen((char *)p))) - { - case -1: - fprintf(outfile, "**Failed: invalid UTF-8 string cannot be " - "converted to UTF-32\n"); - goto SKIP_DATA; - - case -2: - fprintf(outfile, "**Failed: character value greater than 0x10ffff " - "cannot be converted to UTF-32\n"); - goto SKIP_DATA; - - case -3: - fprintf(outfile, "**Failed: character value is ill-formed UTF-32\n"); - goto SKIP_DATA; - - default: - break; - } - p = (pcre_uint8 *)buffer32; - } -#endif - - /* Compile many times when timing */ - - if (timeit > 0) - { - register int i; - clock_t time_taken; - clock_t start_time = clock(); - for (i = 0; i < timeit; i++) - { - PCRE_COMPILE(re, p, options, &error, &erroroffset, tables); - if (re != NULL) free(re); - } - total_compile_time += (time_taken = clock() - start_time); - fprintf(outfile, "Compile time %.4f milliseconds\n", - (((double)time_taken * 1000.0) / (double)timeit) / - (double)CLOCKS_PER_SEC); - } - - PCRE_COMPILE(re, p, options, &error, &erroroffset, tables); - - /* Compilation failed; go back for another re, skipping to blank line - if non-interactive. */ - - if (re == NULL) - { - fprintf(outfile, "Failed: %s at offset %d\n", error, erroroffset); - SKIP_DATA: - if (infile != stdin) - { - for (;;) - { - if (extend_inputline(infile, buffer, NULL) == NULL) - { - done = 1; - goto CONTINUE; - } - len = (int)strlen((char *)buffer); - while (len > 0 && isspace(buffer[len-1])) len--; - if (len == 0) break; - } - fprintf(outfile, "\n"); - } - goto CONTINUE; - } - - /* Compilation succeeded. It is now possible to set the UTF-8 option from - within the regex; check for this so that we know how to process the data - lines. */ - - if (new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options) < 0) - goto SKIP_DATA; - if ((get_options & PCRE_UTF8) != 0) use_utf = 1; - - /* Extract the size for possible writing before possibly flipping it, - and remember the store that was got. */ - - true_size = REAL_PCRE_SIZE(re); - - /* Output code size information if requested */ - - if (log_store) - { - int name_count, name_entry_size, real_pcre_size; - - new_info(re, NULL, PCRE_INFO_NAMECOUNT, &name_count); - new_info(re, NULL, PCRE_INFO_NAMEENTRYSIZE, &name_entry_size); - real_pcre_size = 0; -#ifdef SUPPORT_PCRE8 - if (REAL_PCRE_FLAGS(re) & PCRE_MODE8) - real_pcre_size = sizeof(real_pcre); -#endif -#ifdef SUPPORT_PCRE16 - if (REAL_PCRE_FLAGS(re) & PCRE_MODE16) - real_pcre_size = sizeof(real_pcre16); -#endif -#ifdef SUPPORT_PCRE32 - if (REAL_PCRE_FLAGS(re) & PCRE_MODE32) - real_pcre_size = sizeof(real_pcre32); -#endif - new_info(re, NULL, PCRE_INFO_SIZE, &size); - fprintf(outfile, "Memory allocation (code space): %d\n", - (int)(size - real_pcre_size - name_count * name_entry_size)); - } - - /* If -s or /S was present, study the regex to generate additional info to - help with the matching, unless the pattern has the SS option, which - suppresses the effect of /S (used for a few test patterns where studying is - never sensible). */ - - if (do_study || (force_study >= 0 && !no_force_study)) - { - if (timeit > 0) - { - register int i; - clock_t time_taken; - clock_t start_time = clock(); - for (i = 0; i < timeit; i++) - { - PCRE_STUDY(extra, re, study_options, &error); - } - total_study_time = (time_taken = clock() - start_time); - if (extra != NULL) - { - PCRE_FREE_STUDY(extra); - } - fprintf(outfile, " Study time %.4f milliseconds\n", - (((double)time_taken * 1000.0) / (double)timeit) / - (double)CLOCKS_PER_SEC); - } - PCRE_STUDY(extra, re, study_options, &error); - if (error != NULL) - fprintf(outfile, "Failed to study: %s\n", error); - else if (extra != NULL) - { - true_study_size = ((pcre_study_data *)(extra->study_data))->size; - if (log_store) - { - size_t jitsize; - if (new_info(re, extra, PCRE_INFO_JITSIZE, &jitsize) == 0 && - jitsize != 0) - fprintf(outfile, "Memory allocation (JIT code): %d\n", (int)jitsize); - } - } - } - - /* If /K was present, we set up for handling MARK data. */ - - if (do_mark) - { - if (extra == NULL) - { - extra = (pcre_extra *)malloc(sizeof(pcre_extra)); - extra->flags = 0; - } - extra->mark = &markptr; - extra->flags |= PCRE_EXTRA_MARK; - } - - /* Extract and display information from the compiled data if required. */ - - SHOW_INFO: - - if (do_debug) - { - fprintf(outfile, "------------------------------------------------------------------\n"); - PCRE_PRINTINT(re, outfile, debug_lengths); - } - - /* We already have the options in get_options (see above) */ - - if (do_showinfo) - { - unsigned long int all_options; - pcre_uint32 first_char, need_char; - pcre_uint32 match_limit, recursion_limit; - int count, backrefmax, first_char_set, need_char_set, okpartial, jchanged, - hascrorlf, maxlookbehind, match_empty; - int nameentrysize, namecount; - const pcre_uint8 *nametable; - - if (new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count) + - new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax) + - new_info(re, NULL, PCRE_INFO_FIRSTCHARACTER, &first_char) + - new_info(re, NULL, PCRE_INFO_FIRSTCHARACTERFLAGS, &first_char_set) + - new_info(re, NULL, PCRE_INFO_REQUIREDCHAR, &need_char) + - new_info(re, NULL, PCRE_INFO_REQUIREDCHARFLAGS, &need_char_set) + - new_info(re, NULL, PCRE_INFO_NAMEENTRYSIZE, &nameentrysize) + - new_info(re, NULL, PCRE_INFO_NAMECOUNT, &namecount) + - new_info(re, NULL, PCRE_INFO_NAMETABLE, (void *)&nametable) + - new_info(re, NULL, PCRE_INFO_OKPARTIAL, &okpartial) + - new_info(re, NULL, PCRE_INFO_JCHANGED, &jchanged) + - new_info(re, NULL, PCRE_INFO_HASCRORLF, &hascrorlf) + - new_info(re, NULL, PCRE_INFO_MATCH_EMPTY, &match_empty) + - new_info(re, NULL, PCRE_INFO_MAXLOOKBEHIND, &maxlookbehind) - != 0) - goto SKIP_DATA; - - fprintf(outfile, "Capturing subpattern count = %d\n", count); - - if (backrefmax > 0) - fprintf(outfile, "Max back reference = %d\n", backrefmax); - - if (maxlookbehind > 0) - fprintf(outfile, "Max lookbehind = %d\n", maxlookbehind); - - if (new_info(re, NULL, PCRE_INFO_MATCHLIMIT, &match_limit) == 0) - fprintf(outfile, "Match limit = %u\n", match_limit); - - if (new_info(re, NULL, PCRE_INFO_RECURSIONLIMIT, &recursion_limit) == 0) - fprintf(outfile, "Recursion limit = %u\n", recursion_limit); - - if (namecount > 0) - { - fprintf(outfile, "Named capturing subpatterns:\n"); - while (namecount-- > 0) - { - int imm2_size = pcre_mode == PCRE8_MODE ? 2 : 1; - int length = (int)STRLEN(nametable + imm2_size); - fprintf(outfile, " "); - PCHARSV(nametable, imm2_size, length, outfile); - while (length++ < nameentrysize - imm2_size) putc(' ', outfile); -#ifdef SUPPORT_PCRE32 - if (pcre_mode == PCRE32_MODE) - fprintf(outfile, "%3d\n", (int)(((PCRE_SPTR32)nametable)[0])); -#endif -#ifdef SUPPORT_PCRE16 - if (pcre_mode == PCRE16_MODE) - fprintf(outfile, "%3d\n", (int)(((PCRE_SPTR16)nametable)[0])); -#endif -#ifdef SUPPORT_PCRE8 - if (pcre_mode == PCRE8_MODE) - fprintf(outfile, "%3d\n", ((int)nametable[0] << 8) | (int)nametable[1]); -#endif - nametable += nameentrysize * CHAR_SIZE; - } - } - - if (!okpartial) fprintf(outfile, "Partial matching not supported\n"); - if (hascrorlf) fprintf(outfile, "Contains explicit CR or LF match\n"); - if (match_empty) fprintf(outfile, "May match empty string\n"); - - all_options = REAL_PCRE_OPTIONS(re); - if (do_flip) all_options = swap_uint32(all_options); - - if (get_options == 0) fprintf(outfile, "No options\n"); - else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", - ((get_options & PCRE_ANCHORED) != 0)? " anchored" : "", - ((get_options & PCRE_CASELESS) != 0)? " caseless" : "", - ((get_options & PCRE_EXTENDED) != 0)? " extended" : "", - ((get_options & PCRE_MULTILINE) != 0)? " multiline" : "", - ((get_options & PCRE_FIRSTLINE) != 0)? " firstline" : "", - ((get_options & PCRE_DOTALL) != 0)? " dotall" : "", - ((get_options & PCRE_BSR_ANYCRLF) != 0)? " bsr_anycrlf" : "", - ((get_options & PCRE_BSR_UNICODE) != 0)? " bsr_unicode" : "", - ((get_options & PCRE_DOLLAR_ENDONLY) != 0)? " dollar_endonly" : "", - ((get_options & PCRE_EXTRA) != 0)? " extra" : "", - ((get_options & PCRE_UNGREEDY) != 0)? " ungreedy" : "", - ((get_options & PCRE_NO_AUTO_CAPTURE) != 0)? " no_auto_capture" : "", - ((get_options & PCRE_NO_AUTO_POSSESS) != 0)? " no_auto_possessify" : "", - ((get_options & PCRE_UTF8) != 0)? " utf" : "", - ((get_options & PCRE_UCP) != 0)? " ucp" : "", - ((get_options & PCRE_NO_UTF8_CHECK) != 0)? " no_utf_check" : "", - ((get_options & PCRE_NO_START_OPTIMIZE) != 0)? " no_start_optimize" : "", - ((get_options & PCRE_DUPNAMES) != 0)? " dupnames" : "", - ((get_options & PCRE_NEVER_UTF) != 0)? " never_utf" : ""); - - if (jchanged) fprintf(outfile, "Duplicate name status changes\n"); - - switch (get_options & PCRE_NEWLINE_BITS) - { - case PCRE_NEWLINE_CR: - fprintf(outfile, "Forced newline sequence: CR\n"); - break; - - case PCRE_NEWLINE_LF: - fprintf(outfile, "Forced newline sequence: LF\n"); - break; - - case PCRE_NEWLINE_CRLF: - fprintf(outfile, "Forced newline sequence: CRLF\n"); - break; - - case PCRE_NEWLINE_ANYCRLF: - fprintf(outfile, "Forced newline sequence: ANYCRLF\n"); - break; - - case PCRE_NEWLINE_ANY: - fprintf(outfile, "Forced newline sequence: ANY\n"); - break; - - default: - break; - } - - if (first_char_set == 2) - { - fprintf(outfile, "First char at start or follows newline\n"); - } - else if (first_char_set == 1) - { - const char *caseless = - ((REAL_PCRE_FLAGS(re) & PCRE_FCH_CASELESS) == 0)? - "" : " (caseless)"; - - if (PRINTOK(first_char)) - fprintf(outfile, "First char = \'%c\'%s\n", first_char, caseless); - else - { - fprintf(outfile, "First char = "); - pchar(first_char, outfile); - fprintf(outfile, "%s\n", caseless); - } - } - else - { - fprintf(outfile, "No first char\n"); - } - - if (need_char_set == 0) - { - fprintf(outfile, "No need char\n"); - } - else - { - const char *caseless = - ((REAL_PCRE_FLAGS(re) & PCRE_RCH_CASELESS) == 0)? - "" : " (caseless)"; - - if (PRINTOK(need_char)) - fprintf(outfile, "Need char = \'%c\'%s\n", need_char, caseless); - else - { - fprintf(outfile, "Need char = "); - pchar(need_char, outfile); - fprintf(outfile, "%s\n", caseless); - } - } - - /* Don't output study size; at present it is in any case a fixed - value, but it varies, depending on the computer architecture, and - so messes up the test suite. (And with the /F option, it might be - flipped.) If study was forced by an external -s, don't show this - information unless -i or -d was also present. This means that, except - when auto-callouts are involved, the output from runs with and without - -s should be identical. */ - - if (do_study || (force_study >= 0 && showinfo && !no_force_study)) - { - if (extra == NULL) - fprintf(outfile, "Study returned NULL\n"); - else - { - pcre_uint8 *start_bits = NULL; - int minlength; - - if (new_info(re, extra, PCRE_INFO_MINLENGTH, &minlength) == 0) - fprintf(outfile, "Subject length lower bound = %d\n", minlength); - - if (new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits) == 0) - { - if (start_bits == NULL) - fprintf(outfile, "No starting char list\n"); - else - { - int i; - int c = 24; - fprintf(outfile, "Starting chars: "); - for (i = 0; i < 256; i++) - { - if ((start_bits[i/8] & (1<<(i&7))) != 0) - { - if (c > 75) - { - fprintf(outfile, "\n "); - c = 2; - } - if (PRINTOK(i) && i != ' ') - { - fprintf(outfile, "%c ", i); - c += 2; - } - else - { - fprintf(outfile, "\\x%02x ", i); - c += 5; - } - } - } - fprintf(outfile, "\n"); - } - } - } - - /* Show this only if the JIT was set by /S, not by -s. */ - - if ((study_options & PCRE_STUDY_ALLJIT) != 0 && - (force_study_options & PCRE_STUDY_ALLJIT) == 0) - { - int jit; - if (new_info(re, extra, PCRE_INFO_JIT, &jit) == 0) - { - if (jit) - fprintf(outfile, "JIT study was successful\n"); - else -#ifdef SUPPORT_JIT - fprintf(outfile, "JIT study was not successful\n"); -#else - fprintf(outfile, "JIT support is not available in this version of PCRE\n"); -#endif - } - } - } - } - - /* If the '>' option was present, we write out the regex to a file, and - that is all. The first 8 bytes of the file are the regex length and then - the study length, in big-endian order. */ - - if (to_file != NULL) - { - FILE *f = fopen((char *)to_file, "wb"); - if (f == NULL) - { - fprintf(outfile, "Unable to open %s: %s\n", to_file, strerror(errno)); - } - else - { - pcre_uint8 sbuf[8]; - - if (do_flip) regexflip(re, extra); - sbuf[0] = (pcre_uint8)((true_size >> 24) & 255); - sbuf[1] = (pcre_uint8)((true_size >> 16) & 255); - sbuf[2] = (pcre_uint8)((true_size >> 8) & 255); - sbuf[3] = (pcre_uint8)((true_size) & 255); - sbuf[4] = (pcre_uint8)((true_study_size >> 24) & 255); - sbuf[5] = (pcre_uint8)((true_study_size >> 16) & 255); - sbuf[6] = (pcre_uint8)((true_study_size >> 8) & 255); - sbuf[7] = (pcre_uint8)((true_study_size) & 255); - - if (fwrite(sbuf, 1, 8, f) < 8 || - fwrite(re, 1, true_size, f) < true_size) - { - fprintf(outfile, "Write error on %s: %s\n", to_file, strerror(errno)); - } - else - { - fprintf(outfile, "Compiled pattern written to %s\n", to_file); - - /* If there is study data, write it. */ - - if (extra != NULL) - { - if (fwrite(extra->study_data, 1, true_study_size, f) < - true_study_size) - { - fprintf(outfile, "Write error on %s: %s\n", to_file, - strerror(errno)); - } - else fprintf(outfile, "Study data written to %s\n", to_file); - } - } - fclose(f); - } - - new_free(re); - if (extra != NULL) - { - PCRE_FREE_STUDY(extra); - } - if (locale_set) - { - new_free((void *)tables); - setlocale(LC_CTYPE, "C"); - locale_set = 0; - } - continue; /* With next regex */ - } - } /* End of non-POSIX compile */ - - /* Read data lines and test them */ - - for (;;) - { -#ifdef SUPPORT_PCRE8 - pcre_uint8 *q8; -#endif -#ifdef SUPPORT_PCRE16 - pcre_uint16 *q16; -#endif -#ifdef SUPPORT_PCRE32 - pcre_uint32 *q32; -#endif - pcre_uint8 *bptr; - int *use_offsets = offsets; - int use_size_offsets = size_offsets; - int callout_data = 0; - int callout_data_set = 0; - int count; - pcre_uint32 c; - int copystrings = 0; - int find_match_limit = default_find_match_limit; - int getstrings = 0; - int getlist = 0; - int gmatched = 0; - int start_offset = 0; - int start_offset_sign = 1; - int g_notempty = 0; - int use_dfa = 0; - - *copynames = 0; - *getnames = 0; - -#ifdef SUPPORT_PCRE32 - cn32ptr = copynames; - gn32ptr = getnames; -#endif -#ifdef SUPPORT_PCRE16 - cn16ptr = copynames16; - gn16ptr = getnames16; -#endif -#ifdef SUPPORT_PCRE8 - cn8ptr = copynames8; - gn8ptr = getnames8; -#endif - - SET_PCRE_CALLOUT(callout); - first_callout = 1; - last_callout_mark = NULL; - callout_extra = 0; - callout_count = 0; - callout_fail_count = 999999; - callout_fail_id = -1; - show_malloc = 0; - options = 0; - - if (extra != NULL) extra->flags &= - ~(PCRE_EXTRA_MATCH_LIMIT|PCRE_EXTRA_MATCH_LIMIT_RECURSION); - - len = 0; - for (;;) - { - if (extend_inputline(infile, buffer + len, "data> ") == NULL) - { - if (len > 0) /* Reached EOF without hitting a newline */ - { - fprintf(outfile, "\n"); - break; - } - done = 1; - goto CONTINUE; - } - if (infile != stdin) fprintf(outfile, "%s", (char *)buffer); - len = (int)strlen((char *)buffer); - if (buffer[len-1] == '\n') break; - } - - while (len > 0 && isspace(buffer[len-1])) len--; - buffer[len] = 0; - if (len == 0) break; - - p = buffer; - while (isspace(*p)) p++; - -#ifndef NOUTF - /* Check that the data is well-formed UTF-8 if we're in UTF mode. To create - invalid input to pcre_exec, you must use \x?? or \x{} sequences. */ - - if (use_utf) - { - pcre_uint8 *q; - pcre_uint32 cc; - int n = 1; - - for (q = p; n > 0 && *q; q += n) n = utf82ord(q, &cc); - if (n <= 0) - { - fprintf(outfile, "**Failed: invalid UTF-8 string cannot be used as input in UTF mode\n"); - goto NEXT_DATA; - } - } -#endif - -#ifdef SUPPORT_VALGRIND - /* Mark the dbuffer as addressable but undefined again. */ - - if (dbuffer != NULL) - { - VALGRIND_MAKE_MEM_UNDEFINED(dbuffer, dbuffer_size * CHAR_SIZE); - } -#endif - - /* Allocate a buffer to hold the data line; len+1 is an upper bound on - the number of pcre_uchar units that will be needed. */ - - while (dbuffer == NULL || (size_t)len >= dbuffer_size) - { - dbuffer_size *= 2; - dbuffer = (pcre_uint8 *)realloc(dbuffer, dbuffer_size * CHAR_SIZE); - if (dbuffer == NULL) - { - fprintf(stderr, "pcretest: realloc(%d) failed\n", (int)dbuffer_size); - exit(1); - } - } - -#ifdef SUPPORT_PCRE8 - q8 = (pcre_uint8 *) dbuffer; -#endif -#ifdef SUPPORT_PCRE16 - q16 = (pcre_uint16 *) dbuffer; -#endif -#ifdef SUPPORT_PCRE32 - q32 = (pcre_uint32 *) dbuffer; -#endif - - while ((c = *p++) != 0) - { - int i = 0; - int n = 0; - - /* In UTF mode, input can be UTF-8, so just copy all non-backslash bytes. - In non-UTF mode, allow the value of the byte to fall through to later, - where values greater than 127 are turned into UTF-8 when running in - 16-bit or 32-bit mode. */ - - if (c != '\\') - { -#ifndef NOUTF - if (use_utf && HASUTF8EXTRALEN(c)) { GETUTF8INC(c, p); } -#endif - } - - /* Handle backslash escapes */ - - else switch ((c = *p++)) - { - case 'a': c = 7; break; - case 'b': c = '\b'; break; - case 'e': c = 27; break; - case 'f': c = '\f'; break; - case 'n': c = '\n'; break; - case 'r': c = '\r'; break; - case 't': c = '\t'; break; - case 'v': c = '\v'; break; - - case '0': case '1': case '2': case '3': - case '4': case '5': case '6': case '7': - c -= '0'; - while (i++ < 2 && isdigit(*p) && *p != '8' && *p != '9') - c = c * 8 + *p++ - '0'; - break; - - case 'o': - if (*p == '{') - { - pcre_uint8 *pt = p; - c = 0; - for (pt++; isdigit(*pt) && *pt != '8' && *pt != '9'; pt++) - { - if (++i == 12) - fprintf(outfile, "** Too many octal digits in \\o{...} item; " - "using only the first twelve.\n"); - else c = c * 8 + *pt - '0'; - } - if (*pt == '}') p = pt + 1; - else fprintf(outfile, "** Missing } after \\o{ (assumed)\n"); - } - break; - - case 'x': - if (*p == '{') - { - pcre_uint8 *pt = p; - c = 0; - - /* We used to have "while (isxdigit(*(++pt)))" here, but it fails - when isxdigit() is a macro that refers to its argument more than - once. This is banned by the C Standard, but apparently happens in at - least one MacOS environment. */ - - for (pt++; isxdigit(*pt); pt++) - { - if (++i == 9) - fprintf(outfile, "** Too many hex digits in \\x{...} item; " - "using only the first eight.\n"); - else c = c * 16 + tolower(*pt) - ((isdigit(*pt))? '0' : 'a' - 10); - } - if (*pt == '}') - { - p = pt + 1; - break; - } - /* Not correct form for \x{...}; fall through */ - } - - /* \x without {} always defines just one byte in 8-bit mode. This - allows UTF-8 characters to be constructed byte by byte, and also allows - invalid UTF-8 sequences to be made. Just copy the byte in UTF mode. - Otherwise, pass it down to later code so that it can be turned into - UTF-8 when running in 16/32-bit mode. */ - - c = 0; - while (i++ < 2 && isxdigit(*p)) - { - c = c * 16 + tolower(*p) - ((isdigit(*p))? '0' : 'a' - 10); - p++; - } -#if !defined NOUTF && defined SUPPORT_PCRE8 - if (use_utf && (pcre_mode == PCRE8_MODE)) - { - *q8++ = c; - continue; - } -#endif - break; - - case 0: /* \ followed by EOF allows for an empty line */ - p--; - continue; - - case '>': - if (*p == '-') - { - start_offset_sign = -1; - p++; - } - while(isdigit(*p)) start_offset = start_offset * 10 + *p++ - '0'; - start_offset *= start_offset_sign; - continue; - - case 'A': /* Option setting */ - options |= PCRE_ANCHORED; - continue; - - case 'B': - options |= PCRE_NOTBOL; - continue; - - case 'C': - if (isdigit(*p)) /* Set copy string */ - { - while(isdigit(*p)) n = n * 10 + *p++ - '0'; - copystrings |= 1 << n; - } - else if (isalnum(*p)) - { - READ_CAPTURE_NAME(p, &cn8ptr, &cn16ptr, &cn32ptr, re); - } - else if (*p == '+') - { - callout_extra = 1; - p++; - } - else if (*p == '-') - { - SET_PCRE_CALLOUT(NULL); - p++; - } - else if (*p == '!') - { - callout_fail_id = 0; - p++; - while(isdigit(*p)) - callout_fail_id = callout_fail_id * 10 + *p++ - '0'; - callout_fail_count = 0; - if (*p == '!') - { - p++; - while(isdigit(*p)) - callout_fail_count = callout_fail_count * 10 + *p++ - '0'; - } - } - else if (*p == '*') - { - int sign = 1; - callout_data = 0; - if (*(++p) == '-') { sign = -1; p++; } - while(isdigit(*p)) - callout_data = callout_data * 10 + *p++ - '0'; - callout_data *= sign; - callout_data_set = 1; - } - continue; - -#if !defined NODFA - case 'D': -#if !defined NOPOSIX - if (posix || do_posix) - printf("** Can't use dfa matching in POSIX mode: \\D ignored\n"); - else -#endif - use_dfa = 1; - continue; -#endif - -#if !defined NODFA - case 'F': - options |= PCRE_DFA_SHORTEST; - continue; -#endif - - case 'G': - if (isdigit(*p)) - { - while(isdigit(*p)) n = n * 10 + *p++ - '0'; - getstrings |= 1 << n; - } - else if (isalnum(*p)) - { - READ_CAPTURE_NAME(p, &gn8ptr, &gn16ptr, &gn32ptr, re); - } - continue; - - case 'J': - while(isdigit(*p)) n = n * 10 + *p++ - '0'; - if (extra != NULL - && (extra->flags & PCRE_EXTRA_EXECUTABLE_JIT) != 0 - && extra->executable_jit != NULL) - { - if (jit_stack != NULL) { PCRE_JIT_STACK_FREE(jit_stack); } - jit_stack = PCRE_JIT_STACK_ALLOC(1, n * 1024); - PCRE_ASSIGN_JIT_STACK(extra, jit_callback, jit_stack); - } - continue; - - case 'L': - getlist = 1; - continue; - - case 'M': - find_match_limit = 1; - continue; - - case 'N': - if ((options & PCRE_NOTEMPTY) != 0) - options = (options & ~PCRE_NOTEMPTY) | PCRE_NOTEMPTY_ATSTART; - else - options |= PCRE_NOTEMPTY; - continue; - - case 'O': - while(isdigit(*p)) n = n * 10 + *p++ - '0'; - if (n > size_offsets_max) - { - size_offsets_max = n; - free(offsets); - use_offsets = offsets = (int *)malloc(size_offsets_max * sizeof(int)); - if (offsets == NULL) - { - printf("** Failed to get %d bytes of memory for offsets vector\n", - (int)(size_offsets_max * sizeof(int))); - yield = 1; - goto EXIT; - } - } - use_size_offsets = n; - if (n == 0) use_offsets = NULL; /* Ensures it can't write to it */ - else use_offsets = offsets + size_offsets_max - n; /* To catch overruns */ - continue; - - case 'P': - options |= ((options & PCRE_PARTIAL_SOFT) == 0)? - PCRE_PARTIAL_SOFT : PCRE_PARTIAL_HARD; - continue; - - case 'Q': - while(isdigit(*p)) n = n * 10 + *p++ - '0'; - if (extra == NULL) - { - extra = (pcre_extra *)malloc(sizeof(pcre_extra)); - extra->flags = 0; - } - extra->flags |= PCRE_EXTRA_MATCH_LIMIT_RECURSION; - extra->match_limit_recursion = n; - continue; - - case 'q': - while(isdigit(*p)) n = n * 10 + *p++ - '0'; - if (extra == NULL) - { - extra = (pcre_extra *)malloc(sizeof(pcre_extra)); - extra->flags = 0; - } - extra->flags |= PCRE_EXTRA_MATCH_LIMIT; - extra->match_limit = n; - continue; - -#if !defined NODFA - case 'R': - options |= PCRE_DFA_RESTART; - continue; -#endif - - case 'S': - show_malloc = 1; - continue; - - case 'Y': - options |= PCRE_NO_START_OPTIMIZE; - continue; - - case 'Z': - options |= PCRE_NOTEOL; - continue; - - case '?': - options |= PCRE_NO_UTF8_CHECK; - continue; - - case '<': - { - int x = check_mc_option(p, outfile, TRUE, "escape sequence"); - if (x == 0) goto NEXT_DATA; - options |= x; - while (*p++ != '>'); - } - continue; - } - - /* We now have a character value in c that may be greater than 255. - In 8-bit mode we convert to UTF-8 if we are in UTF mode. Values greater - than 127 in UTF mode must have come from \x{...} or octal constructs - because values from \x.. get this far only in non-UTF mode. */ - -#ifdef SUPPORT_PCRE8 - if (pcre_mode == PCRE8_MODE) - { -#ifndef NOUTF - if (use_utf) - { - if (c > 0x7fffffff) - { - fprintf(outfile, "** Character \\x{%x} is greater than 0x7fffffff " - "and so cannot be converted to UTF-8\n", c); - goto NEXT_DATA; - } - q8 += ord2utf8(c, q8); - } - else -#endif - { - if (c > 0xffu) - { - fprintf(outfile, "** Character \\x{%x} is greater than 255 " - "and UTF-8 mode is not enabled.\n", c); - fprintf(outfile, "** Truncation will probably give the wrong " - "result.\n"); - } - *q8++ = c; - } - } -#endif -#ifdef SUPPORT_PCRE16 - if (pcre_mode == PCRE16_MODE) - { -#ifndef NOUTF - if (use_utf) - { - if (c > 0x10ffffu) - { - fprintf(outfile, "** Failed: character \\x{%x} is greater than " - "0x10ffff and so cannot be converted to UTF-16\n", c); - goto NEXT_DATA; - } - else if (c >= 0x10000u) - { - c-= 0x10000u; - *q16++ = 0xD800 | (c >> 10); - *q16++ = 0xDC00 | (c & 0x3ff); - } - else - *q16++ = c; - } - else -#endif - { - if (c > 0xffffu) - { - fprintf(outfile, "** Character \\x{%x} is greater than 0xffff " - "and UTF-16 mode is not enabled.\n", c); - fprintf(outfile, "** Truncation will probably give the wrong " - "result.\n"); - } - - *q16++ = c; - } - } -#endif -#ifdef SUPPORT_PCRE32 - if (pcre_mode == PCRE32_MODE) - { - *q32++ = c; - } -#endif - - } - - /* Reached end of subject string */ - -#ifdef SUPPORT_PCRE8 - if (pcre_mode == PCRE8_MODE) - { - *q8 = 0; - len = (int)(q8 - (pcre_uint8 *)dbuffer); - } -#endif -#ifdef SUPPORT_PCRE16 - if (pcre_mode == PCRE16_MODE) - { - *q16 = 0; - len = (int)(q16 - (pcre_uint16 *)dbuffer); - } -#endif -#ifdef SUPPORT_PCRE32 - if (pcre_mode == PCRE32_MODE) - { - *q32 = 0; - len = (int)(q32 - (pcre_uint32 *)dbuffer); - } -#endif - - /* If we're compiling with explicit valgrind support, Mark the data from after - its end to the end of the buffer as unaddressable, so that a read over the end - of the buffer will be seen by valgrind, even if it doesn't cause a crash. - If we're not building with valgrind support, at least move the data to the end - of the buffer so that it might at least cause a crash. - If we are using the POSIX interface, we must include the terminating zero. */ - - bptr = dbuffer; - -#if !defined NOPOSIX - if (posix || do_posix) - { -#ifdef SUPPORT_VALGRIND - VALGRIND_MAKE_MEM_NOACCESS(dbuffer + len + 1, dbuffer_size - (len + 1)); -#else - memmove(bptr + dbuffer_size - len - 1, bptr, len + 1); - bptr += dbuffer_size - len - 1; -#endif - } - else -#endif - { -#ifdef SUPPORT_VALGRIND - VALGRIND_MAKE_MEM_NOACCESS(dbuffer + len * CHAR_SIZE, (dbuffer_size - len) * CHAR_SIZE); -#else - bptr = memmove(bptr + (dbuffer_size - len) * CHAR_SIZE, bptr, len * CHAR_SIZE); -#endif - } - - if ((all_use_dfa || use_dfa) && find_match_limit) - { - printf("**Match limit not relevant for DFA matching: ignored\n"); - find_match_limit = 0; - } - - /* Handle matching via the POSIX interface, which does not - support timing or playing with the match limit or callout data. */ - -#if !defined NOPOSIX - if (posix || do_posix) - { - int rc; - int eflags = 0; - regmatch_t *pmatch = NULL; - if (use_size_offsets > 0) - pmatch = (regmatch_t *)malloc(sizeof(regmatch_t) * use_size_offsets); - if ((options & PCRE_NOTBOL) != 0) eflags |= REG_NOTBOL; - if ((options & PCRE_NOTEOL) != 0) eflags |= REG_NOTEOL; - if ((options & PCRE_NOTEMPTY) != 0) eflags |= REG_NOTEMPTY; - - rc = regexec(&preg, (const char *)bptr, use_size_offsets, pmatch, eflags); - - if (rc != 0) - { - (void)regerror(rc, &preg, (char *)buffer, buffer_size); - fprintf(outfile, "No match: POSIX code %d: %s\n", rc, buffer); - } - else if ((REAL_PCRE_OPTIONS(preg.re_pcre) & PCRE_NO_AUTO_CAPTURE) != 0) - { - fprintf(outfile, "Matched with REG_NOSUB\n"); - } - else - { - size_t i; - for (i = 0; i < (size_t)use_size_offsets; i++) - { - if (pmatch[i].rm_so >= 0) - { - fprintf(outfile, "%2d: ", (int)i); - PCHARSV(dbuffer, pmatch[i].rm_so, - pmatch[i].rm_eo - pmatch[i].rm_so, outfile); - fprintf(outfile, "\n"); - if (do_showcaprest || (i == 0 && do_showrest)) - { - fprintf(outfile, "%2d+ ", (int)i); - PCHARSV(dbuffer, pmatch[i].rm_eo, len - pmatch[i].rm_eo, - outfile); - fprintf(outfile, "\n"); - } - } - } - } - free(pmatch); - goto NEXT_DATA; - } - -#endif /* !defined NOPOSIX */ - - /* Handle matching via the native interface - repeats for /g and /G */ - - /* Ensure that there is a JIT callback if we want to verify that JIT was - actually used. If jit_stack == NULL, no stack has yet been assigned. */ - - if (verify_jit && jit_stack == NULL && extra != NULL) - { PCRE_ASSIGN_JIT_STACK(extra, jit_callback, jit_stack); } - - for (;; gmatched++) /* Loop for /g or /G */ - { - markptr = NULL; - jit_was_used = FALSE; - - if (timeitm > 0) - { - register int i; - clock_t time_taken; - clock_t start_time = clock(); - -#if !defined NODFA - if (all_use_dfa || use_dfa) - { - if ((options & PCRE_DFA_RESTART) != 0) - { - fprintf(outfile, "Timing DFA restarts is not supported\n"); - break; - } - if (dfa_workspace == NULL) - dfa_workspace = (int *)malloc(DFA_WS_DIMENSION*sizeof(int)); - for (i = 0; i < timeitm; i++) - { - PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset, - (options | g_notempty), use_offsets, use_size_offsets, - dfa_workspace, DFA_WS_DIMENSION); - } - } - else -#endif - - for (i = 0; i < timeitm; i++) - { - PCRE_EXEC(count, re, extra, bptr, len, start_offset, - (options | g_notempty), use_offsets, use_size_offsets); - } - total_match_time += (time_taken = clock() - start_time); - fprintf(outfile, "Execute time %.4f milliseconds\n", - (((double)time_taken * 1000.0) / (double)timeitm) / - (double)CLOCKS_PER_SEC); - } - - /* If find_match_limit is set, we want to do repeated matches with - varying limits in order to find the minimum value for the match limit and - for the recursion limit. The match limits are relevant only to the normal - running of pcre_exec(), so disable the JIT optimization. This makes it - possible to run the same set of tests with and without JIT externally - requested. */ - - if (find_match_limit) - { - if (extra != NULL) { PCRE_FREE_STUDY(extra); } - extra = (pcre_extra *)malloc(sizeof(pcre_extra)); - extra->flags = 0; - - (void)check_match_limit(re, extra, bptr, len, start_offset, - options|g_notempty, use_offsets, use_size_offsets, - PCRE_EXTRA_MATCH_LIMIT, &(extra->match_limit), - PCRE_ERROR_MATCHLIMIT, "match()"); - - count = check_match_limit(re, extra, bptr, len, start_offset, - options|g_notempty, use_offsets, use_size_offsets, - PCRE_EXTRA_MATCH_LIMIT_RECURSION, &(extra->match_limit_recursion), - PCRE_ERROR_RECURSIONLIMIT, "match() recursion"); - } - - /* If callout_data is set, use the interface with additional data */ - - else if (callout_data_set) - { - if (extra == NULL) - { - extra = (pcre_extra *)malloc(sizeof(pcre_extra)); - extra->flags = 0; - } - extra->flags |= PCRE_EXTRA_CALLOUT_DATA; - extra->callout_data = &callout_data; - PCRE_EXEC(count, re, extra, bptr, len, start_offset, - options | g_notempty, use_offsets, use_size_offsets); - extra->flags &= ~PCRE_EXTRA_CALLOUT_DATA; - } - - /* The normal case is just to do the match once, with the default - value of match_limit. */ - -#if !defined NODFA - else if (all_use_dfa || use_dfa) - { - if (dfa_workspace == NULL) - dfa_workspace = (int *)malloc(DFA_WS_DIMENSION*sizeof(int)); - if (dfa_matched++ == 0) - dfa_workspace[0] = -1; /* To catch bad restart */ - PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset, - (options | g_notempty), use_offsets, use_size_offsets, dfa_workspace, - DFA_WS_DIMENSION); - if (count == 0) - { - fprintf(outfile, "Matched, but offsets vector is too small to show all matches\n"); - count = use_size_offsets/2; - } - } -#endif - - else - { - PCRE_EXEC(count, re, extra, bptr, len, start_offset, - options | g_notempty, use_offsets, use_size_offsets); - if (count == 0) - { - fprintf(outfile, "Matched, but too many substrings\n"); - /* 2 is a special case; match can be returned */ - count = (use_size_offsets == 2)? 1 : use_size_offsets/3; - } - } - - /* Matched */ - - if (count >= 0) - { - int i, maxcount; - void *cnptr, *gnptr; - -#if !defined NODFA - if (all_use_dfa || use_dfa) maxcount = use_size_offsets/2; else -#endif - /* 2 is a special case; match can be returned */ - maxcount = (use_size_offsets == 2)? 1 : use_size_offsets/3; - - /* This is a check against a lunatic return value. */ - - if (count > maxcount) - { - fprintf(outfile, - "** PCRE error: returned count %d is too big for offset size %d\n", - count, use_size_offsets); - count = use_size_offsets/3; - if (do_g || do_G) - { - fprintf(outfile, "** /%c loop abandoned\n", do_g? 'g' : 'G'); - do_g = do_G = FALSE; /* Break g/G loop */ - } - } - - /* do_allcaps requests showing of all captures in the pattern, to check - unset ones at the end. */ - - if (do_allcaps) - { - if (new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count) < 0) - goto SKIP_DATA; - count++; /* Allow for full match */ - if (count * 2 > use_size_offsets) count = use_size_offsets/2; - } - - /* Output the captured substrings. Note that, for the matched string, - the use of \K in an assertion can make the start later than the end. */ - - for (i = 0; i < count * 2; i += 2) - { - if (use_offsets[i] < 0) - { - if (use_offsets[i] != -1) - fprintf(outfile, "ERROR: bad negative value %d for offset %d\n", - use_offsets[i], i); - if (use_offsets[i+1] != -1) - fprintf(outfile, "ERROR: bad negative value %d for offset %d\n", - use_offsets[i+1], i+1); - fprintf(outfile, "%2d: <unset>\n", i/2); - } - else - { - int start = use_offsets[i]; - int end = use_offsets[i+1]; - - if (start > end) - { - start = use_offsets[i+1]; - end = use_offsets[i]; - fprintf(outfile, "Start of matched string is beyond its end - " - "displaying from end to start.\n"); - } - - fprintf(outfile, "%2d: ", i/2); - PCHARSV(bptr, start, end - start, outfile); - if (verify_jit && jit_was_used) fprintf(outfile, " (JIT)"); - fprintf(outfile, "\n"); - - /* Note: don't use the start/end variables here because we want to - show the text from what is reported as the end. */ - - if (do_showcaprest || (i == 0 && do_showrest)) - { - fprintf(outfile, "%2d+ ", i/2); - PCHARSV(bptr, use_offsets[i+1], len - use_offsets[i+1], - outfile); - fprintf(outfile, "\n"); - } - } - } - - if (markptr != NULL) - { - fprintf(outfile, "MK: "); - PCHARSV(markptr, 0, -1, outfile); - fprintf(outfile, "\n"); - } - - for (i = 0; i < 32; i++) - { - if ((copystrings & (1 << i)) != 0) - { - int rc; - char copybuffer[256]; - PCRE_COPY_SUBSTRING(rc, bptr, use_offsets, count, i, - copybuffer, sizeof(copybuffer)); - if (rc < 0) - fprintf(outfile, "copy substring %d failed %d\n", i, rc); - else - { - fprintf(outfile, "%2dC ", i); - PCHARSV(copybuffer, 0, rc, outfile); - fprintf(outfile, " (%d)\n", rc); - } - } - } - - cnptr = copynames; - for (;;) - { - int rc; - char copybuffer[256]; - -#ifdef SUPPORT_PCRE32 - if (pcre_mode == PCRE32_MODE) - { - if (*(pcre_uint32 *)cnptr == 0) break; - } -#endif -#ifdef SUPPORT_PCRE16 - if (pcre_mode == PCRE16_MODE) - { - if (*(pcre_uint16 *)cnptr == 0) break; - } -#endif -#ifdef SUPPORT_PCRE8 - if (pcre_mode == PCRE8_MODE) - { - if (*(pcre_uint8 *)cnptr == 0) break; - } -#endif - - PCRE_COPY_NAMED_SUBSTRING(rc, re, bptr, use_offsets, count, - cnptr, copybuffer, sizeof(copybuffer)); - - if (rc < 0) - { - fprintf(outfile, "copy substring "); - PCHARSV(cnptr, 0, -1, outfile); - fprintf(outfile, " failed %d\n", rc); - } - else - { - fprintf(outfile, " C "); - PCHARSV(copybuffer, 0, rc, outfile); - fprintf(outfile, " (%d) ", rc); - PCHARSV(cnptr, 0, -1, outfile); - putc('\n', outfile); - } - - cnptr = (char *)cnptr + (STRLEN(cnptr) + 1) * CHAR_SIZE; - } - - for (i = 0; i < 32; i++) - { - if ((getstrings & (1 << i)) != 0) - { - int rc; - const char *substring; - PCRE_GET_SUBSTRING(rc, bptr, use_offsets, count, i, &substring); - if (rc < 0) - fprintf(outfile, "get substring %d failed %d\n", i, rc); - else - { - fprintf(outfile, "%2dG ", i); - PCHARSV(substring, 0, rc, outfile); - fprintf(outfile, " (%d)\n", rc); - PCRE_FREE_SUBSTRING(substring); - } - } - } - - gnptr = getnames; - for (;;) - { - int rc; - const char *substring; - -#ifdef SUPPORT_PCRE32 - if (pcre_mode == PCRE32_MODE) - { - if (*(pcre_uint32 *)gnptr == 0) break; - } -#endif -#ifdef SUPPORT_PCRE16 - if (pcre_mode == PCRE16_MODE) - { - if (*(pcre_uint16 *)gnptr == 0) break; - } -#endif -#ifdef SUPPORT_PCRE8 - if (pcre_mode == PCRE8_MODE) - { - if (*(pcre_uint8 *)gnptr == 0) break; - } -#endif - - PCRE_GET_NAMED_SUBSTRING(rc, re, bptr, use_offsets, count, - gnptr, &substring); - if (rc < 0) - { - fprintf(outfile, "get substring "); - PCHARSV(gnptr, 0, -1, outfile); - fprintf(outfile, " failed %d\n", rc); - } - else - { - fprintf(outfile, " G "); - PCHARSV(substring, 0, rc, outfile); - fprintf(outfile, " (%d) ", rc); - PCHARSV(gnptr, 0, -1, outfile); - PCRE_FREE_SUBSTRING(substring); - putc('\n', outfile); - } - - gnptr = (char *)gnptr + (STRLEN(gnptr) + 1) * CHAR_SIZE; - } - - if (getlist) - { - int rc; - const char **stringlist; - PCRE_GET_SUBSTRING_LIST(rc, bptr, use_offsets, count, &stringlist); - if (rc < 0) - fprintf(outfile, "get substring list failed %d\n", rc); - else - { - for (i = 0; i < count; i++) - { - fprintf(outfile, "%2dL ", i); - PCHARSV(stringlist[i], 0, -1, outfile); - putc('\n', outfile); - } - if (stringlist[i] != NULL) - fprintf(outfile, "string list not terminated by NULL\n"); - PCRE_FREE_SUBSTRING_LIST(stringlist); - } - } - } - - /* There was a partial match. If the bumpalong point is not the same as - the first inspected character, show the offset explicitly. */ - - else if (count == PCRE_ERROR_PARTIAL) - { - fprintf(outfile, "Partial match"); - if (use_size_offsets > 2 && use_offsets[0] != use_offsets[2]) - fprintf(outfile, " at offset %d", use_offsets[2]); - if (markptr != NULL) - { - fprintf(outfile, ", mark="); - PCHARSV(markptr, 0, -1, outfile); - } - if (use_size_offsets > 1) - { - fprintf(outfile, ": "); - PCHARSV(bptr, use_offsets[0], use_offsets[1] - use_offsets[0], - outfile); - } - if (verify_jit && jit_was_used) fprintf(outfile, " (JIT)"); - fprintf(outfile, "\n"); - break; /* Out of the /g loop */ - } - - /* Failed to match. If this is a /g or /G loop and we previously set - g_notempty after a null match, this is not necessarily the end. We want - to advance the start offset, and continue. We won't be at the end of the - string - that was checked before setting g_notempty. - - Complication arises in the case when the newline convention is "any", - "crlf", or "anycrlf". If the previous match was at the end of a line - terminated by CRLF, an advance of one character just passes the \r, - whereas we should prefer the longer newline sequence, as does the code in - pcre_exec(). Fudge the offset value to achieve this. We check for a - newline setting in the pattern; if none was set, use PCRE_CONFIG() to - find the default. - - Otherwise, in the case of UTF-8 matching, the advance must be one - character, not one byte. */ - - else - { - if (g_notempty != 0) - { - int onechar = 1; - unsigned int obits = REAL_PCRE_OPTIONS(re); - use_offsets[0] = start_offset; - if ((obits & PCRE_NEWLINE_BITS) == 0) - { - int d; - (void)PCRE_CONFIG(PCRE_CONFIG_NEWLINE, &d); - /* Note that these values are always the ASCII ones, even in - EBCDIC environments. CR = 13, NL = 10. */ - obits = (d == 13)? PCRE_NEWLINE_CR : - (d == 10)? PCRE_NEWLINE_LF : - (d == (13<<8 | 10))? PCRE_NEWLINE_CRLF : - (d == -2)? PCRE_NEWLINE_ANYCRLF : - (d == -1)? PCRE_NEWLINE_ANY : 0; - } - if (((obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_ANY || - (obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_CRLF || - (obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_ANYCRLF) - && - start_offset < len - 1 && ( -#ifdef SUPPORT_PCRE8 - (pcre_mode == PCRE8_MODE && - bptr[start_offset] == '\r' && - bptr[start_offset + 1] == '\n') || -#endif -#ifdef SUPPORT_PCRE16 - (pcre_mode == PCRE16_MODE && - ((PCRE_SPTR16)bptr)[start_offset] == '\r' && - ((PCRE_SPTR16)bptr)[start_offset + 1] == '\n') || -#endif -#ifdef SUPPORT_PCRE32 - (pcre_mode == PCRE32_MODE && - ((PCRE_SPTR32)bptr)[start_offset] == '\r' && - ((PCRE_SPTR32)bptr)[start_offset + 1] == '\n') || -#endif - 0)) - onechar++; - else if (use_utf) - { - while (start_offset + onechar < len) - { - if ((bptr[start_offset+onechar] & 0xc0) != 0x80) break; - onechar++; - } - } - use_offsets[1] = start_offset + onechar; - } - else - { - switch(count) - { - case PCRE_ERROR_NOMATCH: - if (gmatched == 0) - { - if (markptr == NULL) - { - fprintf(outfile, "No match"); - } - else - { - fprintf(outfile, "No match, mark = "); - PCHARSV(markptr, 0, -1, outfile); - } - if (verify_jit && jit_was_used) fprintf(outfile, " (JIT)"); - putc('\n', outfile); - } - break; - - case PCRE_ERROR_BADUTF8: - case PCRE_ERROR_SHORTUTF8: - fprintf(outfile, "Error %d (%s UTF-%d string)", count, - (count == PCRE_ERROR_BADUTF8)? "bad" : "short", - 8 * CHAR_SIZE); - if (use_size_offsets >= 2) - fprintf(outfile, " offset=%d reason=%d", use_offsets[0], - use_offsets[1]); - fprintf(outfile, "\n"); - break; - - case PCRE_ERROR_BADUTF8_OFFSET: - fprintf(outfile, "Error %d (bad UTF-%d offset)\n", count, - 8 * CHAR_SIZE); - break; - - default: - if (count < 0 && - (-count) < (int)(sizeof(errtexts)/sizeof(const char *))) - fprintf(outfile, "Error %d (%s)\n", count, errtexts[-count]); - else - fprintf(outfile, "Error %d (Unexpected value)\n", count); - break; - } - - break; /* Out of the /g loop */ - } - } - - /* If not /g or /G we are done */ - - if (!do_g && !do_G) break; - - /* If we have matched an empty string, first check to see if we are at - the end of the subject. If so, the /g loop is over. Otherwise, mimic what - Perl's /g options does. This turns out to be rather cunning. First we set - PCRE_NOTEMPTY_ATSTART and PCRE_ANCHORED and try the match again at the - same point. If this fails (picked up above) we advance to the next - character. */ - - g_notempty = 0; - - if (use_offsets[0] == use_offsets[1]) - { - if (use_offsets[0] == len) break; - g_notempty = PCRE_NOTEMPTY_ATSTART | PCRE_ANCHORED; - } - - /* For /g, update the start offset, leaving the rest alone */ - - if (do_g) start_offset = use_offsets[1]; - - /* For /G, update the pointer and length */ - - else - { - bptr += use_offsets[1] * CHAR_SIZE; - len -= use_offsets[1]; - } - } /* End of loop for /g and /G */ - - NEXT_DATA: continue; - } /* End of loop for data lines */ - - CONTINUE: - -#if !defined NOPOSIX - if (posix || do_posix) regfree(&preg); -#endif - - if (re != NULL) new_free(re); - if (extra != NULL) - { - PCRE_FREE_STUDY(extra); - } - if (locale_set) - { - new_free((void *)tables); - setlocale(LC_CTYPE, "C"); - locale_set = 0; - } - if (jit_stack != NULL) - { - PCRE_JIT_STACK_FREE(jit_stack); - jit_stack = NULL; - } - } - -if (infile == stdin) fprintf(outfile, "\n"); - -if (showtotaltimes) - { - fprintf(outfile, "--------------------------------------\n"); - if (timeit > 0) - { - fprintf(outfile, "Total compile time %.4f milliseconds\n", - (((double)total_compile_time * 1000.0) / (double)timeit) / - (double)CLOCKS_PER_SEC); - fprintf(outfile, "Total study time %.4f milliseconds\n", - (((double)total_study_time * 1000.0) / (double)timeit) / - (double)CLOCKS_PER_SEC); - } - fprintf(outfile, "Total execute time %.4f milliseconds\n", - (((double)total_match_time * 1000.0) / (double)timeitm) / - (double)CLOCKS_PER_SEC); - } - -EXIT: - -if (infile != NULL && infile != stdin) fclose(infile); -if (outfile != NULL && outfile != stdout) fclose(outfile); - -free(buffer); -free(dbuffer); -free(pbuffer); -free(offsets); - -#ifdef SUPPORT_PCRE16 -if (buffer16 != NULL) free(buffer16); -#endif -#ifdef SUPPORT_PCRE32 -if (buffer32 != NULL) free(buffer32); -#endif - -#if !defined NODFA -if (dfa_workspace != NULL) - free(dfa_workspace); -#endif - -#if defined(__VMS) - yield = SS$_NORMAL; /* Return values via DCL symbols */ -#endif - -return yield; -} - -/* End of pcretest.c */ |