About
Version: %1
Versiya: %1
Development version
Links:
Official website:
Support forum:
SMPlayer is a graphical interface for %1.
Click here to know the translators from the transifex teams
Spanish
Ispan
Russian
Rus
Many people contributed with translations.
You can also help to translate SMPlayer into your own language.
Visit %1 and join a translation team.
Japanese
Yapon
Ukrainian
Ukrain
Turkish
Turkiy
Using %1
SMPlayer is a graphical interface for %1 and %2.
<b>%1</b> (%2)
<b>%1</b> (%2)
About SMPlayer
SMPlayer haqida
Page
&Info
&Ma'lumot
icon
nishoncha
&Contributions
&Translators
&Tarjimonlar
&License
&Litsenziya
Portable Edition
Using Qt %1 (compiled with Qt %2)
Arabic
Arabiy
SMPlayer logo by %1
Read the entire license
&OK
Read a translation
Packages for Windows created by %1
Windows uchun paketlar %1 tomonidan yaratilgan
Many other people contributed with patches. See the Changelog for details.
ActionsEditor
Name
Nomi
Description
Ta'rifi
Shortcut
&Save
&Saqlash
&Load
&Yuklash
Key files
Kalit fayllari
Choose a filename
Fayl nomini tanlash
Confirm overwrite?
Almashtirilsinmi?
The file %1 already exists.
Do you want to overwrite?
%1 fayli mavjud.
Almashtirishni istaysizmi?
Choose a file
Faylni tanlash
Error
Xato
The file couldn't be saved
Faylni saqlab bo'lmadi
The file couldn't be loaded
Faylni yuklab bo'lmadi
&Change shortcut...
AudioEqualizer
Audio Equalizer
Audio ekvalayzer
%1 Hz
%1 kHz
&Preset
&Apply
&Qo'llash
&Reset
&Set as default values
&Close
Flat
Classical
Club
Dance
Full bass
Full bass and treble
Full treble
Headphones
Large hall
Live
Party
Pop
Reggae
Rock
Ska
Soft
Soft rock
Techno
Custom
Use the current values as default values for new videos.
Set all controls to zero.
Information
Ma'lumot
The current values have been stored to be used as default.
BaseGui
&Open
&Ochish
&Play
&Ijro ettirish
&Video
&Video
&Audio
&Audio
&Subtitles
&Browse
Op&tions
&Parametrlar
&Help
Y&ordam
&File...
&Fayl...
D&irectory...
&Playlist...
&DVD from drive
D&VD from folder...
&URL...
&Clear
&Recent files
P&lay
&Pause
&Stop
&Frame step
&Normal speed
&Double speed
Speed &-10%
Speed &+10%
&Off
closed captions menu
Sp&eed
&Repeat
&Fullscreen
&To'liq ekran
&Compact mode
Si&ze
&Aspect ratio
&None
&Lowpass5
Linear &Blend
&Deinterlace
&Postprocessing
&Autodetect phase
&Deblock
De&ring
Add n&oise
F&ilters
&Equalizer
&Ekvalayzer
&Screenshot
S&tay on top
&Extrastereo
&Karaoke
&Karaoke
&Filters
&Stereo
&Stereo
&4.0 Surround
&5.1 Surround
&Channels
&Left channel
&Right channel
&Stereo mode
&Mute
Volume &-
Volume &+
&Delay -
D&elay +
&Select
&Load...
Delay &-
Delay &+
&Up
&Down
&Title
&Chapter
&Angle
&Playlist
&Disabled
&OSD
P&references
About &SMPlayer
<empty>
<bo'sh>
Video
Video
Audio
Audio
Playlists
Ijro ro'yxatlari
All files
Hamma fayllar
Choose a file
Faylni tanlash
&YouTube%1 browser
&Donate / Share with your friends
SMPlayer - Information
SMPlayer - Ma'lumot
The CDROM / DVD drives are not configured yet.
The configuration dialog will be shown now, so you can do it.
Select the Blu-ray folder
Choose a directory
Direktoriyani tanlash
Subtitles
Subtitrlar
Error detected
Unfortunately this video can't be played.
Pause
Stop
Play / Pause
Pause / Frame step
U&nload
V&CD
C&lose
Zoom &-
Zoom &+
&Reset
Move &left
Move &right
Move &up
Move &down
&Previous line in subtitles
N&ext line in subtitles
%1 log
SMPlayer log
Update the &YouTube code
-%1
-%1
+%1
+%1
Dec volume (2)
&Blu-ray from drive
Blu-&ray from folder...
Fra&me back step
&Half speed
Screenshot with subtitles
Screenshot without subtitles
Start/stop capturing stream
Thumb&nail Generator...
Stereo &3D filter
Debanding (&gradfun)
&Headphone optimization
Seek to next subtitle
Seek to previous subtitle
Use custo&m style
Find subtitles at &OpenSubtitles.org...
&Default
subfps menu
&Information and properties...
T&ablet mode
First Steps &Guide
&Open configuration folder
&Donate
Size &+
Size &-
Show times with &milliseconds
Inc volume (2)
Exit fullscreen
OSD - Next level
Dec contrast
Inc contrast
Dec brightness
Inc brightness
Dec hue
Inc hue
Dec saturation
Dec gamma
Next audio
Keyingi audio
Next subtitle
Keyingi subtitr
Next chapter
Previous chapter
Show filename on OSD
Show &info on OSD
Show playback time on OSD
Vie&w
De&noise
Blur/S&harp
&Off
denoise menu
&Normal
denoise menu
&Soft
denoise menu
&None
unsharp menu
&Blur
unsharp menu
&Sharpen
unsharp menu
Select audio track
&6.1 Surround
&7.1 Surround
&Mono
Re&verse
Prim&ary track
Select subtitle track
Secondary trac&k
Select secondary subtitle track
F&rames per second
&Bookmarks
&Add new bookmark
&Edit bookmarks
Previous bookmark
Next bookmark
Quick access menu
Logs
Support SMPlayer
Donate
No
SMPlayer needs you
SMPlayer is free software. However the development requires a lot of time and a lot of work.
In order to keep developing SMPlayer with new features we need your help.
Please consider to support the SMPlayer project by sending a donation.
Even the smallest amount will help a lot.
Connection failed
The video you requested needs to open a HTTPS connection.
Unfortunately the OpenSSL component, required for it, is not available in your system.
Please, visit %1 to know how to fix this problem.
this link
Unfortunately due to changes in the Youtube page, this video can't be played.
Problems with Youtube
More info in the log.
%1 Error
%1 has finished unexpectedly.
The component youtube-dl failed to run.
Installing the Microsoft Visual C++ 2010 Redistributable Package (x86) may fix the problem.
Click here to get it
%1 failed to start.
Please check the %1 path in preferences.
%1 has crashed.
The YouTube Browser is not installed.
Visit %1 to get it.
The YouTube Browser failed to run.
Be sure it's installed correctly.
The system has switched to tablet mode. Should SMPlayer change to tablet mode as well?
The system has exited tablet mode. Should SMPlayer turn off the tablet mode as well?
Remember my decision and don't ask again
Unfortunately due to changes in the Youtube page, the video '%1' can't be played.
Do you want to update the Youtube code? This may fix the problem.
Maybe updating SMPlayer could fix the problem.
S&hare SMPlayer with your friends
Information
Ma'lumot
You need to restart SMPlayer to use the new GUI.
Confirm deletion - SMPlayer
Delete the list of recent files?
The current values have been stored to be used as default.
Inc saturation
Inc gamma
&Load external file...
&Kerndeint
&Yadif (normal)
Y&adif (double framerate)
&Next
Pre&vious
Volume &normalization
&Audio CD
&Toggle double size
S&ize -
Si&ze +
Add &black borders
Soft&ware scaling
&FAQ
&Command line options
SMPlayer command line options
&Forced subtitles only
Reset video equalizer
The server returned '%1'
Exit code: %1
See the log for more info.
&Rotate
&Off
&Rotate by 90 degrees clockwise and flip
Rotate by 90 degrees &clockwise
Rotate by 90 degrees counterclock&wise
Rotate by 90 degrees counterclockwise and &flip
&Jump to...
Show context menu
Multimedia
E&qualizer
Reset audio equalizer
Upload su&btitles to OpenSubtitles.org...
&Auto
Speed -&4%
&Speed +4%
Speed -&1%
S&peed +1%
Scree&n
&Default
Mirr&or image
Next video
&Track
video
&Track
audio
Warning - Using old MPlayer
The version of MPlayer (%1) installed on your system is obsolete. SMPlayer can't work well with it: some options won't work, subtitle selection may fail...
Please, update your MPlayer.
(This warning won't be displayed anymore)
Next aspect ratio
&Auto zoom
Zoom for &16:9
Zoom for &2.35:1
&Always
&Never
While &playing
DVD &menu
DVD &previous menu
DVD menu, move up
DVD menu, move down
DVD menu, move left
DVD menu, move right
DVD menu, select option
DVD menu, mouse click
Set dela&y...
Se&t delay...
SMPlayer - Audio delay
Audio delay (in milliseconds):
SMPlayer - Subtitle delay
Subtitle delay (in milliseconds):
Toggle stay on top
Jump to %1
Start/stop takin&g screenshots
Subtitle &visibility
Next wheel function
P&rogram
program
&TV
Radi&o
Subtitles onl&y
Volume + &Seek
Volume + Seek + &Timer
Volume + Seek + Timer + T&otal time
Video filters are disabled when using vdpau
Fli&p image
Zoo&m
Set &A marker
Set &B marker
&Clear A-B markers
&A-B section
Toggle deinterlacing
&Closed captions
&Disc
F&avorites
Check for &updates
BaseGuiPlus
SMPlayer is still running here
S&how icon in system tray
Play on &Chromecast
Send &video to screen
Information about connected &screens
Video is sent to an external screen
Send &audio to
&Hide
&Restore
Information about connected screens
Connected screens
Number of screens: %1
Primary screen: %1
Information for screen %1
Available geometry: %1 %2 %3 x %4
Available size: %1 x %2
Available virtual geometry: %1 %2 %3 x %4
Available virtual size: %1 x %2
Depth: %1 bits
Geometry: %1 %2 %3 x %4
Logical DPI: %1
Physical DPI: %1
Physical size: %1 x %2 mm
Refresh rate: %1 Hz
Size: %1 x %2
Virtual geometry: %1 %2 %3 x %4
Virtual size: %1 x %2
Primary screen
SMPlayer external screen output
&Default audio device
&Quit
BookmarkDialog
Edit bookmarks
&New bookmark
&Delete bookmark
Time
Name
Nomi
CodeDownloader
Downloading...
Connecting to %1
The Youtube code has been updated successfully.
Installed version: %1
Success
Error
Xato
An error happened writing %1
An error happened while downloading the file:<br>%1
Core
Brightness: %1
Contrast: %1
Gamma: %1
Hue: %1
Saturation: %1
Volume: %1
Zoom: %1
Font scale: %1
Aspect ratio: %1
Updating the font cache. This may take some seconds...
Subtitle delay: %1 ms
Audio delay: %1 ms
Speed: %1
Unable to retrieve the Youtube page
Unable to locate the URL of the video
Subtitles on
Subtitles off
Mouse wheel seeks now
Mouse wheel changes volume now
Mouse wheel changes zoom level now
Mouse wheel changes speed now
Screenshot saved as %1
Starting...
Screenshot NOT taken, folder not configured
Screenshots NOT taken, folder not configured
"A" marker set to %1
"B" marker set to %1
A-B markers cleared
Connecting to %1
DefaultGui
Audio
Audio
Subtitle
&Main toolbar
&Language toolbar
&Toolbars
Ready
F&ormat info
A:%1
B:%1
Status&bar
&Video info
&Frame counter
&Bitrate info
&Show the current time with milliseconds
Edit main &toolbar
Edit &control bar
Edit m&ini control bar
Edit &floating control
%1x%2 %3 fps
width + height + fps
V: %1 kbps A: %2 kbps
EqSlider
icon
nishoncha
ErrorDialog
Oops, something went wrong
Hide log
Show log
MPlayer Error
icon
nishoncha
Oops, something wrong happened
Error
Xato
FavoriteEditor
Icon
Name
Nomi
Media
Favorite editor
Favorite list
You can edit, delete, sort or add new items. Double click on a cell to edit its contents.
Select an icon file
Images
icon
nishoncha
D&elete
Delete &all
&Up
&Down
&New item
New &submenu
Favorites
Jump to item
Enter the number of the item in the list to jump:
&Edit...
&Jump...
&Next
&Previous
&Add current media
FileChooser
Click to select a file or folder
FileDownloader
Downloading...
Connecting to %1
FilePropertiesDialog
SMPlayer - File properties
&Information
&Demuxer
&Select the demuxer that will be used for this file:
&Reset
&Video codec
&Select the video codec:
A&udio codec
&Select the audio codec:
You can also pass additional video filters.
Separate them with ",". Do not use spaces!
Example: scale=512:-2,mirror
And finally audio filters. Same rule as for video filters.
Example: extrastereo,karaoke
&Options:
V&ideo filters:
Audio &filters:
&OK
&Cancel
Apply
O&ptions for %1
Additional Options for %1
Here you can pass extra options to %1.
Write them separated by spaces.
Example:
FindSubtitlesConfigDialog
Hash
Filename
Hash and filename
HTTP
SOCKS5
Enable/disable the use of the proxy.
The host name of the proxy.
The port of the proxy.
If the proxy requires authentication, this sets the username.
The password for the proxy. <b>Warning:</b> the password will be saved as plain text in the configuration file.
Select the proxy type to be used.
Options
Server
&OpenSubtitles server:
Proxy
General
Search &method:
&Enable proxy
&Host:
&Port:
&Username:
Pa&ssword:
&Type:
A&ppend language code to the subtitle filename
Number of &retries:
FindSubtitlesWindow
Language
Name
Nomi
Format
Files
Date
Uploaded by
Portuguese - Brasil
All
Close
Subtitles service powered by %1
Connecting...
Login to opensubtitles.org has failed
Search has failed
%n subtitle(s) extracted
Error fixing the subtitle lines
&Download
&Copy link to clipboard
Error
Xato
Download failed: %1.
Downloading...
Done.
%1 files available
Failed to parse the received data.
Find Subtitles
&Subtitles for
&Language:
&Refresh
Subtitle saved as %1
Overwrite?
The file %1 already exits, overwrite?
Error saving file
It wasn't possible to save the downloaded
file in folder %1
Please check the permissions of that folder.
Download failed
Temporary file %1
&Options
FontCacheDialog
SMPlayer is initializing
Creating a font cache...
GlobalShortcutsDialog
Select the multimedia keys that SMPlayer will capture.
Media &Play
Media &Stop
Media Pre&vious
Media &Next
Media P&ause
Media &Record
Volume &Mute
Volume &Down
Volume &Up
Global Shortcuts
InfoFile
General
Size
%1 KB (%2 MB)
URL
Length
Demuxer
Name
Nomi
Artist
Author
Album
Genre
Date
Track
Copyright
Comment
Software
Clip info
Video
Video
Resolution
Aspect ratio
Format
Bitrate
%1 kbps
Frames per second
Selected codec
Initial Audio Stream
Rate
%1 Hz
Channels
Audio Streams
Language
undefined
Track %1
Language: %1
Name: %1
ID: %1
Type: %1
Subtitles
Subtitrlar
Type
Stream title
Stream URL
File
InfoWindow
&Close
InputBookmark
Add new bookmark
&Time:
&Name (optional):
InputDVDDirectory
Choose a directory
Direktoriyani tanlash
SMPlayer - Play a DVD from a folder
You can play a DVD from your hard disc. Just select the folder which contains the VIDEO_TS and AUDIO_TS directories.
Choose a directory...
InputMplayerVersion
SMPlayer - Enter the MPlayer version
SMPlayer couldn't identify the MPlayer version you're using.
Version reported by MPlayer:
Please, &select the correct version:
1.0rc1 or older
1.0rc2
1.0rc3 or newer
InputURL
SMPlayer - Enter URL
&URL:
Languages
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Arabiy
Assamese
Aymara
Azerbaijani
Bashkir
Bulgarian
Bihari
Bislama
Bengali
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Greek
English
Esperanto
Spanish
Ispan
Estonian
Basque
Persian
Finnish
Faroese
French
Frisian
Irish
Galician
Guarani
Gujarati
Hausa
Hebrew
Hindi
Croatian
Hungarian
Armenian
Interlingua
Indonesian
Interlingue
Icelandic
Italian
Inuktitut
Japanese
Yapon
Javanese
Georgian
Kazakh
Greenlandic
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Lithuanian
Latvian
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian Nynorsk
Norwegian
Occitan
Oriya
Polish
Portuguese
Quechua
Romanian
Russian
Rus
Kinyarwanda
Sanskrit
Sindhi
Slovak
Samoan
Shona
Somali
Albanian
Serbian
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Tonga
Turkish
Turkiy
Tsonga
Tatar
Twi
Uighur
Ukrainian
Ukrain
Urdu
Uzbek
Vietnamese
Wolof
Xhosa
Yiddish
Yoruba
Zhuang
Chinese
Zulu
Arabic - Syria
Unicode
UTF-8
Western European Languages
Western European Languages with Euro
Slavic/Central European Languages
Esperanto, Galician, Maltese, Turkish
Old Baltic charset
Cyrillic
Modern Greek
Baltic
Celtic
South-Eastern European
Hebrew charsets
Ukrainian, Belarusian
Simplified Chinese charset
Traditional Chinese charset
Japanese charsets
Korean charset
Thai charset
Cyrillic Windows
Slavic/Central European Windows
Arabic Windows
Avestan
Akan
Aragonese
Avaric
Belarusian
Bambara
Bosnian
Chechen
Cree
Church
Chuvash
Divehi
Dzongkha
Ewe
Fulah
Fijian
Gaelic
Manx
Hiri
Haitian
Herero
Chamorro
Igbo
Sichuan
Inupiaq
Ido
Kongo
Kikuyu
Kuanyama
Khmer
Kanuri
Komi
Cornish
Luxembourgish
Ganda
Limburgan
Lao
Luba-Katanga
Marshallese
Bokmål
Ndebele
Ndonga
Navajo
Chichewa
Ojibwa
Oromo
Ossetian
Panjabi
Pali
Pushto
Romansh
Rundi
Sardinian
Sami
Sango
Sinhala
Slovene
Swati
Sotho
Tswana
Tahitian
Venda
Volapük
Walloon
Modern Greek Windows
LogWindow
Choose a filename to save under
Confirm overwrite?
Almashtirilsinmi?
The file already exists.
Do you want to overwrite?
Error saving file
The log couldn't be saved
Logs
Save
Copy to clipboard
Close
&Close
MPVProcess
the '%1' filter is not supported by mpv
File:
Video:
Resolution:
Frames per second:
Estimated:
Aspect Ratio:
Bitrate:
Dropped frames:
Audio:
Sample Rate:
Channels:
Audio/video synchronization:
Cache fill:
Used cache:
MediaBarPanel
Form
MediaPanel
Shuffle playlist
Repeat playlist
MediaPanelClass
MediaPanel
MiniGui
Control bar
Edit &control bar
Edit &floating control
MpcGui
Control bar
Seek bar
-%1
-%1
+%1
+%1
MultilineInputDialog
Enter URL(s)
Enter the URL(s) to be added to the playlist. One per line.
PlayControl
Rewind
Forward
Play / Pause
Stop
Record
Next file in playlist
Previous file in playlist
Playlist
Name
Nomi
Length
&Play
&Ijro ettirish
&Edit
Playlists
Ijro ro'yxatlari
Choose a file
Faylni tanlash
Choose a filename
Fayl nomini tanlash
Confirm overwrite?
Almashtirilsinmi?
The file %1 already exists.
Do you want to overwrite?
%1 fayli mavjud.
Almashtirishni istaysizmi?
All files
Hamma fayllar
Untitled playlist
&Load...
Load playlist from &URL...
Play on Chromec&ast
Open stream in &a web browser
Load/Save
Select one or more files to open
Choose a directory
Direktoriyani tanlash
Edit name
Type the name that will be displayed in the playlist for this file:
&Load
&Yuklash
Filename / URL
Download playlist from URL
&Save
&Saqlash
Save &as...
&Next
Pre&vious
Move &up
Move &down
&Repeat
S&huffle
Add ¤t file
Add &file(s)
Add &directory
Add &URL(s)
Remove &selected
Remove &all
&Delete file from disk
&Copy file path to clipboard
&Open source folder
Search
Show position column
Show name column
Show length column
Show filename column
&Copy URL to clipboard
Confirm deletion
You're about to DELETE the file '%1' from your drive.
This action cannot be undone. Are you sure you want to proceed?
Deletion failed
It wasn't possible to delete '%1'
Error deleting the file
It's not possible to delete '%1' from the filesystem.
It's not possible to load this playlist
Unrecognized format.
Add...
Remove...
Playlist modified
There are unsaved changes, do you want to save the playlist?
Multimedia
PrefAdvanced
Advanced
Auto
&Advanced
icon
nishoncha
Log SMPlayer output
This option is mainly intended for debugging the application.
Filter for SMPlayer logs
&Monitor aspect:
Use the la&vf demuxer by default
O&SD bar position:
Color&key:
&Options:
V&ideo filters:
SMPlayer
Log &SMPlayer output
&Filter for SMPlayer logs:
C&hange...
Logs
Monitor aspect
Select the aspect ratio of your monitor.
Use the lavf demuxer by default
If this option is checked, the lavf demuxer will be used for all formats.
This option may be needed to play playlist files (m3u, pls...). However it can involve a security risk when playing internet sources because the way MPlayer parses and uses playlist files is not safe against maliciously constructed files.
Limitation: the actions are run only when a file is opened and not when the %1 process is restarted (e.g. you select an audio or video filter).
Colorkey
If you see parts of the video over any other window, you can change the colorkey to fix it. Try to select a color close to black.
Options
Video filters
Audio filters
Repaint the background of the video window
Repaint the backgroun&d of the video window
IPv4
Use IPv4 on network connections. Falls back on IPv6 automatically.
IPv6
Use IPv6 on network connections. Falls back on IPv4 automatically.
Network Connection
IPv&4
IPv&6
Lo&gs
Rebuild index if needed
Rebuild &index if needed
If this option is checked, SMPlayer will store the debugging messages that SMPlayer outputs (you can see the log in <b>Options -> View logs -> SMPlayer</b>). This information can be very useful for the developer in case you find a bug.
Log %1 output
If checked, SMPlayer will store the output of %1 (you can see it in <b>Options -> View logs -> %1</b>). In case of problems this log can contain important information, so it's recommended to keep this option checked.
Autosave %1 log
If this option is checked, the %1 log will be saved to the specified file every time a new file starts to play. It's intended for external applications, so they can get info about the file you're playing.
Autosave %1 log filename
Enter here the path and filename that will be used to save the %1 log.
This option allows to filter the SMPlayer messages that will be stored in the log. Here you can write any regular expression.<br>For instance: <i>^Core::.*</i> will display only the lines starting with <i>Core::</i>
Correct pts
&Run %1 in its own window
&Pass short filenames (8+3) to %1
Write them separated by spaces.
Log %1 &output
Notify %1 crash&es
Here you can pass options and filters to %1.
A&utosave %1 log to file
Pa&ss the %1 option to MPlayer (security risk)
Unchecking this option may reduce flickering, but it can also produce strange artifacts under certain circumstances.
OSD bar position
Set the position of the screen where the OSD bar is displayed. 0 is top, 100 bottom.
Run %1 in its own window
If you check this option, the %1 video window won't be embedded in SMPlayer's main window but instead it will use its own window. Note that mouse and keyboard events will be handled directly by %1, that means key shortcuts and mouse clicks probably won't work as expected when the %1 window has the focus.
Notify %1 crashes
If this option is checked, a popup window will be displayed to inform about %1 crashes. Otherwise those failures will be silently ignored.
Pass short filenames (8+3) to %1
If this option is checked, SMPlayer will pass to %1 the short version of the filenames.
Pass the %1 option to MPlayer (security risk)
Switches %1 to an experimental mode where timestamps for video frames are calculated differently and video filters which add new frames or modify timestamps of existing ones are supported. The more accurate timestamps can be visible for example when playing subtitles timed to scene changes with the SSA/ASS library enabled. Without correct pts the subtitle timing will typically be off by some frames. This option does not work correctly with some demuxers and codecs.
Actions list
Here you can specify a list of <i>actions</i> which will be run every time a file is opened. You'll find all available actions in the key shortcut editor in the <b>Keyboard and mouse</b> section. The actions must be separated by spaces. Checkable actions can be followed by <i>true</i> or <i>false</i> to enable or disable the action.
Options for %1
Here you can type options for %1.
Here you can add video filters for %1.
Write them separated by commas. Don't use spaces!
Here you can add audio filters for %1.
Network
R&un the following actions every time a file is opened. The actions must be separated with spaces:
A&udio filters:
&Network
Example:
Rebuilds index of files if no index was found, allowing seeking. Useful with broken/incomplete downloads, or badly created files. This option only works if the underlying media supports seeking (i.e. not with stdin, pipe, etc).<br> <b>Note:</b> the creation of the index may take some time.
C&orrect PTS:
&Verbose
Save SMPlayer log to file
If this option is checked, the SMPlayer log wil be recorded to %1
Sa&ve SMPlayer log to a file
Show tag info in window title
If this option is enabled, information from tags will be shown in window title. Otherwise only the filename will be shown.
Show tag in&fo in window title
PrefAssociations
Warning
Not all files could be associated. Please check your security permissions and retry.
File Types
Select all
Check all file types in the list
Uncheck all file types in the list
List of file types
Note:
Restoration doesn't work on Windows Vista.
File types
Media files handled by SMPlayer:
Select All
Select None
Check the media file extensions you would like SMPlayer to handle. When you click Apply, the checked files will be associated with SMPlayer. If you uncheck a media type, the file association will be restored.
Select none
PrefDrives
Drives
icon
nishoncha
CD device
Choose your CDROM device. It will be used to play VCDs and Audio CDs.
DVD device
Choose your DVD device. It will be used to play DVDs.
Select your &CD device:
Select your &DVD device:
Select your &Blu-ray device:
SMPlayer does not choose any CDROM or DVD devices by default. So before you can actually play a CD or DVD you have to select the devices you want to use (they can be the same).
Blu-ray device
Choose your Blu-ray device. It will be used to play Blu-ray discs.
Enable DVD menus
If this option is checked, SMPlayer will play DVDs using dvdnav. Requires a version of MPlayer with dvdnav support.
<b>Note 1</b>: cache will be disabled, this can affect performance.
<b>Note 2</b>: you may want to assign the action "activate option in DVD menus" to one of the mouse buttons.
<b>Note 3</b>: this feature is under development, expect a lot of issues with it.
&Enable DVD menus (experimental)
&Scan for CD/DVD drives
PrefGeneral
General
&General
Media settings
Start videos in fullscreen
Disable screensaver
7 (6.1 Surround)
8 (7.1 Surround)
Select the %1 executable
Executables
All files
Hamma fayllar
Select a directory
%1 &executable:
Default
Here you can type your preferred language for the audio and subtitle streams. When a media with multiple audio or subtitle streams is found, SMPlayer will try to use your preferred language. This only will work with media that offer info about the language of audio and subtitle streams, like DVDs or mkv files.
Multimedia engine
Select which multimedia engine you want to use, either MPlayer or mpv.
The option 'other' allows you to manually select the path of the executable.
%1 executable
Here you must specify the %1 executable that SMPlayer will use.
Remember settings for streams
When this option is enabled the settings for online streams will be remembered as well.
Screenshots folder
Template for screenshots
For example %1 would save the screenshot as 'moviename_0001.png'.
%1 specifies the filename of the video without the extension, %2 adds a 4 digit number padded with zeros.
Format for screenshots
This option allows to choose the image file type used for saving screenshots.
If this option is enabled, the computer will shut down just after SMPlayer is closed.
Video output driver
Select the video output driver.
If this option is enabled, black borders will be added to the image by default on new opened files.
Audio output driver
Select the audio output driver.
Remember settings
Preferred audio language
Preferred subtitle language
Software video equalizer
Other...
This option specifies the filename template used to save screenshots.
For a full list of the template specifiers visit this link:
This option only works with mpv.
Shut down computer
Add black borders for subtitles by default
You can check this option if video equalizer is not supported by your graphic card or the selected video output driver.<br><b>Note:</b> this option can be incompatible with some video output drivers.
If this option is checked, all videos will start to play in fullscreen mode.
Global audio equalizer
If this option is checked, all media files share the audio equalizer.
If it's not checked, the audio equalizer values are saved along each file and loaded back when the file is played later.
AC3/DTS passthrough over S/PDIF and HDMI
Requests the number of playback channels. %1 asks the decoder to decode the audio into as many channels as specified. Then it is up to the decoder to fulfill the requirement. This is usually only important when playing videos with AC3 audio (like DVDs). In that case liba52 does the decoding by default and correctly downmixes the audio into the requested number of channels. <b>Note</b>: This option is honored by codecs (AC3 only), filters (surround) and audio output drivers (OSS at least).
Allows to change the playback speed without altering pitch.
Software volume control
Check this option to use the software mixer, instead of using the sound card mixer.
Postprocessing quality
Dynamically changes the level of postprocessing depending on the available spare CPU time. The number you specify will be the maximum level used. Usually you can use some big number.
&Audio:
&Remember settings for all files (audio track, subtitles...)
Su&btitles:
&Quality:
Multimedia &engine:
Re&member settings for streams
Temp&late:
F&ormat:
S&hut down computer
Start videos in &fullscreen
Disable &screensaver
Global audio e&qualizer
&AC3/DTS passthrough over S/PDIF and HDMI
Use s&oftware volume control
Ma&x. Amplification:
Direct rendering
Double buffering
D&irect rendering
Dou&ble buffering
Double buffering fixes flicker by storing two frames in memory, and displaying one while decoding another. If disabled it can affect OSD negatively, but often removes OSD flickering.
&Enable postprocessing by default
Volume &normalization by default
Close when finished
If this option is checked, the main window will be automatically closed when the current file/playlist finishes.
2 (Stereo)
4 (4.0 Surround)
6 (5.1 Surround)
C&hannels by default:
&Pause when minimized
Pause when minimized
Enable postprocessing by default
Max. Amplification
Volume normalization by default
Maximizes the volume without distorting the sound.
Channels by default
Sets the maximum amplification level in percent (default: 110). A value of 200 will allow you to adjust the volume up to a maximum of double the current level. With values below 100 the initial volume (which is 100%) will be above the maximum, which e.g. the OSD cannot display correctly.
Postprocessing will be used by default on new opened files.
You can specify here a priority list of audio language codes, separated by commas. For example: spa,eng,jpn
This field accepts regular expressions. Example: <b>es|esp|spa</b> will select the audio track if it matches with <i>es</i>, <i>esp</i> or <i>spa</i>.
You can specify here a priority list of subtitle language codes, separated by commas. For example: spa,eng,jpn
This field accepts regular expressions. Example: <b>es|esp|spa</b> will select the subtitle stream if it matches with <i>es</i>, <i>esp</i> or <i>spa</i>.
Audio track
Specifies the default audio track which will be used when playing new files. If the track doesn't exist, the first one will be used. <br><b>Note:</b> the <i>"preferred audio language"</i> has preference over this option.
Subtitle track
Specifies the default subtitle track which will be used when playing new files. If the track doesn't exist, the first one will be used. <br><b>Note:</b> the <i>"preferred subtitle language"</i> has preference over this option.
Or choose a track number:
Audi&o:
Preferred language:
Preferre&d audio and subtitles
&Subtitle:
High speed &playback without altering pitch
High speed playback without altering pitch
&Video
&Video
Add blac&k borders for subtitles by default
Use s&oftware video equalizer
A&udio
Volume
Video
Video
Audio
Audio
Preferred audio and subtitles
None
Lowpass5
Yadif (normal)
Yadif (double framerate)
Linear Blend
Kerndeint
Deinterlace by default
Select the deinterlace filter that you want to be used for new videos opened.
Remember time position
Remember &time position
Enable the audio equalizer
Check this option if you want to use the audio equalizer.
&Enable the audio equalizer
Draw video using slices
Enable/disable drawing video by 16-pixel height slices/bands. If disabled, the whole frame is drawn in a single run. May be faster or slower, depending on video card and available cache. It has effect only with libmpeg2 and libavcodec codecs.
Dra&w video using slices
&Close when finished playback
fast
slow
fast - ATI cards
User defined...
Default zoom
This option sets the default zoom which will be used for new videos.
Default &zoom:
If this setting is wrong, SMPlayer won't be able to play anything!
Usually SMPlayer will remember the settings for each file you play (audio track selected, volume, filters...). Disable this option if you don't like this feature.
If this option is enabled, the file will be paused when the main window is hidden. When the window is restored, playback will be resumed.
Check this option to disable the screensaver while playing.<br>The screensaver will enabled again when play finishes.
Ou&tput driver:
Add black borders on fullscreen
If this option is enabled, black borders will be added to the image in fullscreen mode. This allows subtitles to be displayed on the black borders.
&Add black borders on fullscreen
one ini file
multiple ini files
Method to store the file settings
This option allows to change the way the file settings would be stored. The following options are available:
<b>one ini file</b>: the settings for all played files will be saved in a single ini file (%1)
The latter method could be faster if there is info for a lot of files.
&Store settings in
<b>multiple ini files</b>: one ini file will be used for each played file. Those ini files will be saved in the folder %1
If you check this option, SMPlayer will remember the last position of the file when you open it again. This option works only with regular files (not with DVDs, CDs, URLs...).
If checked, turns on direct rendering (not supported by all codecs and video outputs)<br><b>Warning:</b> May cause OSD/SUB corruption!
Enable screenshots
You can use this option to enable or disable the possibility to take screenshots.
Here you can specify a folder where the screenshots taken by SMPlayer will be stored. If the folder is not valid the screenshot feature will be disabled.
Screenshots
&Enable screenshots
&Folder:
Global volume
If this option is checked, the same volume will be used for all files you play. If the option is not checked each file uses its own volume.
This option also applies for the mute control.
Glo&bal volume
Switch screensaver off
This option switches the screensaver off just before starting to play a file and switches it on when playback finishes. If this option is enabled, the screensaver won't appear even if playing audio files or when a file is paused.
Avoid screensaver
When this option is checked, SMPlayer will try to prevent the screensaver to be shown when playing a video file. The screensaver will be allowed to be shown if playing an audio file or in pause mode. This option only works if the SMPlayer window is in the foreground.
Screensaver
Swit&ch screensaver off
Avoid &screensaver
Audio/video auto synchronization
Gradually adjusts the A/V sync based on audio delay measurements.
A-V sync correction
Maximum A-V sync correction per frame (in seconds)
Synchronization
Audio/video auto &synchronization
&Factor:
A-V sync &correction
&Max. correction:
<b>Note:</b> This option won't be used for TV channels.
Dei&nterlace by default (except for TV):
Uses hardware AC3 passthrough.
<b>Note:</b> none of the audio filters will be used when this option is enabled.
snap mode
slower dive mode
Configu&re...
PrefInput
Keyboard and mouse
&Keyboard
icon
nishoncha
&Mouse
Button functions:
Dra&g function:
Don't &trigger the left click action with a double click
Media seeking
Volume control
Zoom video
None
Here you can change any key shortcut. To do it double click or press enter over a shortcut cell. Optionally you can also save the list to share it with other people or load it in another computer.
Here you can change any key shortcut. To do it double click or start typing over a shortcut cell. Optionally you can also save the list to share it with other people or load it in another computer.
&Left click
&Double click
&Wheel function:
Shortcut editor
This table allows you to change the key shortcuts of most available actions. Double click or press enter on a item, or press the <b>Change shortcut</b> button to enter in the <i>Modify shortcut</i> dialog. There are two ways to change a shortcut: if the <b>Capture</b> button is on then just press the new key or combination of keys that you want to assign for the action (unfortunately this doesn't work for all keys). If the <b>Capture</b> button is off then you could enter the full name of the key.
Left click
Select the action for left click on the mouse.
Double click
Select the action for double click on the mouse.
Wheel function
Select the action for the mouse wheel.
Play
Pause
Stop
Fullscreen
Compact
Screenshot
Mute
Frame counter
Reset zoom
Exit fullscreen
Double size
Play / Pause
Pause / Frame step
Playlist
Preferences
No function
Change speed
Normal speed
Keyboard
Mouse
Middle click
Select the action for middle click on the mouse.
M&iddle click
X Button &1
X Button &2
Go backward (short)
Go backward (medium)
Go backward (long)
Go forward (short)
Go forward (medium)
Go forward (long)
OSD - Next level
Show context menu
&Right click
Increase volume
Decrease volume
X Button 1
Select the action for the X button 1.
X Button 2
Select the action for the X button 2.
Show video equalizer
Show audio equalizer
Always on top
Play next
Play previous
Never on top
On top while playing
Next chapter
Previous chapter
Activate option under mouse in DVD menus
Return to main DVD menu
Return to previous menu in DVD menus
Move cursor up in DVD menus
Move cursor down in DVD menus
Move cursor left in DVD menus
Move cursor right in DVD menus
Activate highlighted option in DVD menus
Move window
Seek and volume
Use the multimedia keys as global shortcuts
When this option is enabled the multimedia keys (Play, Stop, Volume+/-, Mute, etc.) will work even when SMPlayer is running in the background.
Drag function
This option controls what to do when the mouse is moved while pressing the left button.
the main window is moved
a horizontal movement changes the time position while a vertical movement changes the volume
Don't trigger the left click function with a double click
If this option is enabled when you double click on the video area only the double click function will be triggered. The left click action won't be activated.
By enabling this option the left click is delayed %1 milliseconds because it's necessary to wait that time to know if there's a double click or not.
Change function of wheel
Media &seeking
&Zoom video
&Volume control
&Use the multimedia keys as global shortcuts
Select &keys...
&Change speed
Mouse wheel functions
Check it to enable seeking as one function.
Check it to enable changing volume as one function.
Check it to enable zooming as one function.
Check it to enable changing speed as one function.
M&ouse wheel functions
Select the actions that should be cycled through when using the "Change function of wheel" option.
Reverse mouse wheel seeking
Check it to seek in the opposite direction.
R&everse wheel media seeking
PrefInterface
Interface
Default
&Interface
Never
Whenever it's needed
Only after loading a new video
Privac&y
Recent files
Language
Here you can change the language of the application.
&Short jump
System language
&Medium jump
&Long jump
Mouse &wheel jump
&Use only one running instance of SMPlayer
Ma&x. items
St&yle:
Ico&n set:
L&anguage:
Main window
Auto&resize:
&Prevent window to get outside of screen
Center &window
R&emember position and size
S&kin:
Default font:
&Change...
Use the syste&m native file dialog
&Behaviour of time slider:
Seek to position while dragging
Seek to position when released
Pressi&ng the stop button once resets the time position
The floating control appears in fullscreen mode when the mouse is moved.
Show only when moving the mouse to the &bottom of the screen
Tim&e (in milliseconds) to hide the control:
URLs
&Max. items
&Remember last directory
High &DPI
SMPlayer can scale the interface in high DPI screens. Here you can disable this feature or change the scale factor.
&Enable support for high DPI screens
Scale
A&uto
Changes in this section requires to restart SMPlayer in order to take effect
TextLabel
&Seeking
&Absolute seeking
&Relative seeking
Ins&tances
Autoresize
The main window can be resized automatically. Select the option you prefer.
Remember position and size
If you check this option, the position and size of the main window will be saved and restored when you run SMPlayer again.
Select the graphic interface you prefer for the application.
The <b>Basic GUI</b> provides the traditional interface, with the toolbar and control bar.
The <b>Mini GUI</b> provides a more simple interface, without toolbar and a control bar with few buttons.
The <b>Skinnable GUI</b> provides an interface where several skins are available.
The <b>Mpc GUI</b> looks like the interface in Media Player Classic.
Privacy
Select the maximum number of items that will be shown in the <b>Open->Recent files</b> submenu. If you set it to 0 that menu won't be shown at all.
Icon set
Classic
Basic GUI
Skinnable GUI
Scale fact&or:
Pixel rati&o:
Prevent window to get outside of screen
If after an autoresize the main window gets outside of the screen this option will center the window to prevent it.
Center window
When this option is enabled, the main window will be centered on the desktop.
Select the icon set you prefer for the application.
Skin
Select the skin you prefer for the application. Only available with the skinnable GUI.
Style
Select the style you prefer for the application.
Default font
You can change here the application's font.
Use the system native file dialog
When this option is enabled, SMPlayer will try to use the system native file dialog. Otherwise it will use the internal one.
Seeking
Short jump
Select the time that should be go forward or backward when you choose the %1 action.
short jump
Medium jump
medium jump
Long jump
long jump
Mouse wheel jump
Select the time that should be go forward or backward when you move the mouse wheel.
Behaviour of time slider
Select what to do when dragging the time slider.
Note: this option only works when using mpv as multimedia engine.
Pressing the stop button once resets the time position
Show only when moving the mouse to the bottom of the screen
If this option is checked, the floating control will only be displayed when the mouse is moved to the bottom of the screen. Otherwise the control will appear whenever the mouse is moved, no matter its position.
If this option is enabled, the floating control will appear in compact mode too.
This option only works with the basic GUI.
<b>Warning:</b> the floating control has not been designed for compact mode and it might not work properly.
Time to hide the control
Sets the time (in milliseconds) to hide the control after the mouse went away from the control.
Max. URLs
Select the maximum number of items that the <b>Open->URL</b> dialog will remember. Set it to 0 if you don't want any URL to be stored.
Remember last directory
If this option is checked, SMPlayer will remember the last folder you use to open a file.
Seeking method
Sets the method to be used when seeking with the slider. Absolute seeking may be a little bit more accurate, while relative seeking may work better with files with a wrong length.
By default when the stop button is pressed the time position is remembered so if you press play button the media will resume at the same point. You need to press the stop button twice to reset the time position, but if this option is checked the time position will be set to 0 with only one press of the stop button.
Instances
Use only one running instance of SMPlayer
Check this option if you want to use an already running instance of SMPlayer when opening other files.
Mini GUI
GUI
&GUI
Floating control
Animated
If this option is enabled, the floating control will appear with an animation.
Width
Specifies the width of the control (as a percentage).
Margin
This option sets the number of pixels that the floating control will be away from the bottom of the screen. Useful when the screen is a TV, as the overscan might prevent the control to be visible.
Display in compact mode too
&Floating control
&Animated
&Width:
0
&Margin:
Display in &compact mode too
Mpc GUI
Hide video window when playing audio files
If this option is enabled the video window will be hidden when playing audio files.
&Hide video window when playing audio files
Precise seeking
If this option is enabled, seeks are more accurate but they can be a little bit slower. May not work with some video formats.
&Precise seeking
PrefNetwork
Playback &quality
&User agent
&YouTube (and other sites)
Support for &video sites:
P&referred quality:
Options for YouTube
C&hromecast
Web Server
Changes in this section will be applied the next time the web server is restarted
&Directory listing
Local &IP:
In order to serve local media from this computer to Chromecast, SMPlayer will run a tiny web server. You can adjust here some of the settings.
Subtitles
Subtitrlar
Convert SRT subtitles to &VTT
&Overwrite existing VTT files
Try to &remove advertisements
Position of &subtitles on screen:
&Proxy
&Enable proxy
&Host:
&Port:
&Username:
Pa&ssword:
&Type:
HTTP
SOCKS5
Network
it will try to use mpv + youtube-dl only for the sites that require it
User agent
Disabled
Auto
Best video and audio
Worst
YouTube
Support for video sites
support for video sites is turned off
only the internal support for YouTube will be used
uses mpv + youtube-dl for all sites
Preferred quality
This option specifies the preferred quality for the video streams handled by youtube-dl.
selects the best video and audio streams available
Best
selects the best quality format available as a single file
1080p, 720p...
will try to use the selected resolution if available
selects the worst quality format available
Playback quality
Select the preferred quality for YouTube videos.
Set the user agent that SMPlayer will use when connecting to YouTube.
Chromecast
Local IP
The local IP address of this computer. It will be passed to Chromecast so that it can access the files from this computer.
The port that the web server will use.
Directory listing
When the web server is running, any device in your network can access the files from this computer. If this option is on, any device can get a listing of the files in this computer. If this option is off, the list won't be available.
Convert SRT subtitles to VTT
When this option is enabled SMPlayer will convert automatically subtitle files in SRT format to VTT format. The VTT subtitle will have the same filename but extension .vtt
Overwrite existing VTT files
If this option is enabled SMPlayer will overwrite existing VTT files.
Try to remove advertisements
If this option is enabled SMPlayer will try to find advertisements in the subtitles and remove them.
Position of subtitles on screen
This option sets the position on the screen where the subtitles are displayed.
0 is the top of the screen, 100 is the bottom of the screen.
The special value -1 means the default position.
Proxy
Enable proxy
Enable/disable the use of the proxy.
Host
The host name of the proxy.
Port
The port of the proxy.
Username
If the proxy requires authentication, this sets the username.
Password
The password for the proxy. <b>Warning:</b> the password will be saved as plain text in the configuration file.
Type
Select the proxy type to be used.
PrefPerformance
Performance
&Performance
Priority
Select the priority for the MPlayer process.
realtime
high
abovenormal
normal
belownormal
idle
Decoding
Hardware &decoding
A&uto
KB
Setting a cache may improve performance on slow media
Allow frame drop
Skip displaying some frames to maintain A/V sync on slow systems.
Allow hard frame drop
More intense frame dropping (breaks decoding). Leads to image distortion!
Priorit&y:
&Allow frame drop
Allow &hard frame drop (can lead to image distortion)
&Fast audio track switching
Fast &seek to chapters in dvds
Fast audio track switching
Fast seek to chapters in dvds
If checked, it will try the fastest method to seek to chapters but it might not work with some discs.
Skip loop filter
H.264
Possible values:<br> <b>Yes</b>: it will try the fastest method to switch the audio track (it might not work with some formats).<br> <b>No</b>: the MPlayer process will be restarted whenever you change the audio track.<br> <b>Auto</b>: SMPlayer will decide what to do according to the MPlayer version.
Cache for files
This option specifies how much memory (in kBytes) to use when precaching a file.
Cache for streams
This option specifies how much memory (in kBytes) to use when precaching a URL.
Cache for DVDs
This option specifies how much memory (in kBytes) to use when precaching a DVD.<br><b>Warning:</b> Seeking might not work properly (including chapter switching) when using a cache for DVDs.
&Cache
Cache for &DVDs:
Cache for &local files:
Cache for &streams:
Enabled
Skip (always)
Skip only on HD videos
Loop &filter
This option allows to skips the loop filter (AKA deblocking) during H.264 decoding. Since the filtered frame is supposed to be used as reference for decoding dependent frames this has a worse effect on quality than not doing deblocking on e.g. MPEG-2 video. But at least for high bitrate HDTV this provides a big speedup with no visible quality loss.
None
Auto
Set process priority for %1 according to the predefined priorities available under Windows.<br><b>Warning:</b> Using realtime priority can cause system lockup.
Hardware decoding
Sets the hardware video decoding API. If hardware decoding is not possible, software decoding will be used instead.
Available options:
None: only software decoding will be used.
Auto: it tries to automatically enable hardware decoding using the first available method.
vdpau: for the vdpau and opengl video outputs.
vaapi: for the opengl and vaapi video outputs. For Intel GPUs only.
vaapi-copy: it copies video back into system RAM. For Intel GPUs only.
dxva2-copy: it copies video back to system RAM. Experimental.
This option only works with mpv.
Possible values:
<b>Enabled</b>: the loop filter is not skipped
<b>Skip (always)</b>: the loop filter is skipped no matter the resolution of the video
<b>Skip only on HD videos</b>: the loop filter will be skipped only on videos which height is %1 or greater.
Try to use the non-free CoreAVC codec when no other codec is specified and a non-VDPAU video output is selected.
Requires a %1 build with CoreAVC support.
Cache
Usually this option will enable the cache when it's necessary.
Cache for audio CDs
This option specifies how much memory (in kBytes) to use when precaching an audio CD.
Cache for &audio CDs:
Cache for VCDs
This option specifies how much memory (in kBytes) to use when precaching a VCD.
Cache for &VCDs:
Threads for decoding
Sets the number of threads to use for decoding. Only for MPEG-1/2 and H.264
&Threads for decoding (MPEG-1/2 and H.264 only):
Use CoreAVC if no other codec specified
&Use CoreAVC if no other codec specified
Cache for &TV:
PrefPlaylist
Playlist
If this option is enabled, every time a file is opened, SMPlayer will first clear the playlist and then add the file to it. In case of DVDs, CDs and VCDs, all titles in the disc will be added to the playlist.
None
Video files
Audio files
Video and audio files
Consecutive files
Start playback after loading a playlist
Playback will start just after loading a playlist.
Play next file automatically
When a file reaches the end, the next file will be played automatically.
Ignore playback errors
Add files to the playlist automatically
Add files from folder
Misc
Auto sort
If this option is enabled the list will be sorted automatically after adding files.
Case sensitive search
This option specifies whether the search in the playlist is case sensitive or not.
Save a copy of the playlist on exit
If this option is checked, a copy of the playlist will be saved in the configuration file when SMPlayer is closed, and it will reloaded automatically when SMPlayer is run again.
Enable the option to delete files from disk
This option allows you to enable the option to delete files from disk in the playlist's context menu. To prevent accidental deletions this option is disabled by default.
<b>None</b>: no files will be added
<b>Video files</b>: all video files found in the folder will be added
<b>Audio files</b>: all audio files found in the folder will be added
<b>Video and audio files</b>: all video and audio files found in the folder will be added
<b>Consecutive files</b>: consecutive files (like video_1.avi, video_2.avi) will be added
Play files from start
If this option is enabled, all files from the playlist will start to play from the beginning instead of resuming from a previous playback.
This option can be used to add files automatically to the playlist:
Get info automatically about files added
If this option is enabled, the playlist will ignore playback errors from a previous file and will play the next file in the list.
&Playlist
Add files in directories recursively
Check this option if you want that adding a directory will also add the files in subdirectories recursively. Otherwise only the files in the selected directory will be added.
Check this option to inquire the files to be added to the playlist for some info. That allows to show the title name (if available) and length of the files. Otherwise this info won't be available until the file is actually played. Beware: this option can be slow, specially if you add many files.
Add files from &folder:
P&lay files from start
Playback
S&tart playback after loading a playlist
Pla&y next file automatically
Ig&nore playback errors
Adding files
&Add files to the playlist automatically
Add files in directories &recursively
Get &info automatically about files added (slow)
&Misc
A&uto sort
Cas&e sensitive search
&Save a copy of the playlist on exit
Enable the option to delete files from &disk
PrefSubtitles
Subtitles
Subtitrlar
&Subtitles
Autoload
Same name as movie
Use the &ASS library
Enable &Windows fonts
Font
Size
Au&toload subtitles files (*.srt, *.sub...):
S&elect first available subtitle
All subtitles containing the movie name
All subtitles in the directory
&Default subtitle encoding:
&Include subtitles on screenshots
Select first available subtitle
Default subtitle encoding
Include subtitles on screenshots
Text color
Select the color for the text of the subtitles.
Border color
Select the color for the border of the subtitles.
Select the subtitle autoload method.
If there are one or more subtitle tracks available, one of them will be automatically selected, usually the first one, although if one of them matches the user's preferred language that one will be used instead.
Select the encoding which will be used for subtitle files by default.
Try to autodetect for this language
Subtitle language
Select the language for which you want the encoding to be guessed automatically.
Encoding
Try to a&utodetect for this language:
Outline
Select the font for the subtitles.
Use the ASS library
This option enables the ASS library, which allows to display subtitles with multiple colors, fonts...
Enable Windows fonts
If this option is enabled the Windows system fonts will be available for subtitles. There's an inconvenience: a font cache have to be created which can take some time.
If this option is not checked then only a few fonts bundled with SMPlayer can be used, but this is faster.
The size in pixels.
Bold
If checked, the text will be displayed in <b>bold</b>.
Italic
If checked, the text will be displayed in <i>italic</i>.
Left margin
Specifies the left margin in pixels.
Right margin
Specifies the right margin in pixels.
Vertical margin
Specifies the vertical margin in pixels.
Horizontal alignment
Specifies the horizontal alignment. Possible values are left, centered and right.
Vertical alignment
Specifies the vertical alignment. Possible values: bottom, middle and top.
Border style
Specifies the border style. Possible values: outline and opaque box.
Shadow
Apply style to ASS files too
Si&ze:
Bol&d
&Italic
Colors
&Text:
&Border:
Margins
L&eft:
&Right:
Verti&cal:
Alignment
&Horizontal:
&Vertical:
Border st&yle:
Opacity:
&Outline:
Shado&w:
A&pply style to ASS files too
Use custo&m style
The following options allows you to define the style to be used for non-styled subtitles (srt, sub...).
Left
horizontal alignment
Centered
horizontal alignment
Right
horizontal alignment
Bottom
vertical alignment
Middle
vertical alignment
Top
vertical alignment
Outline
border style
Opaque box
border style
When this option is on, the encoding of the subtitles will be tried to be autodetected for the given language. It will fall back to the default encoding if the autodetection fails. This option requires a %1 with ENCA support.
You should normally not disable this option. Do it only if your %1 is compiled without freetype support. <b>Disabling this option could make subtitles not to work at all!</b>
If border style is set to <i>outline</i>, this option specifies the width of the outline around the text in pixels.
If border style is set to <i>outline</i>, this option specifies the depth of the drop shadow behind the text in pixels.
This option does NOT change the size of the subtitles in the current video. To do so, use the options <i>Size+</i> and <i>Size-</i> in the subtitles menu.
Default scale
This option specifies the default font scale for SSA/ASS subtitles which will be used for new opened files.
Line spacing
This specifies the spacing that will be used to separate multiple lines. It can have negative values.
&Font and colors
Defa&ult scale:
&Line spacing:
Freetype support
Freet&ype support
If this option is checked, the subtitles will appear in the screenshots. <b>Note:</b> it may cause some troubles sometimes.
Customize SSA/ASS style
Here you can enter your customized SSA/ASS style.
Clear the edit line to disable the customized style.
SSA/ASS style
Shadow color
This color will be used for the shadow of the subtitles.
Shadow:
Custo&mize...
If this option is checked, the style defined above will be applied to ass subtitles too.
PrefTV
TV and radio
None
Lowpass5
Yadif (normal)
Yadif (double framerate)
Linear Blend
Kerndeint
Deinterlace by default for TV
Select the deinterlace filter that you want to be used for TV channels.
Rescan ~/.mplayer/channels.conf on startup
&TV and radio
Dei&nterlace by default for TV:
If this option is enabled, SMPlayer will look for new TV and radio channels on ~/.mplayer/channels.conf.ter or ~/.mplayer/channels.conf.
&Check for new channels on startup
PrefUpdates
U&pdates
Check for &updates
Check interval (in &days)
&Open an informative page after an upgrade
Updates
Check for updates
If this option is enabled, SMPlayer will check for updates and display a notification if a new version is available.
Check interval
You can enter here the interval (in days) for the update checks.
Open an informative page after an upgrade
If this option is enabled, an informative page about SMPlayer will be opened after an upgrade.
PreferencesDialog
SMPlayer - Help
&OK
&Cancel
Apply
Help
SMPlayer - Preferences
QObject
will show this message and then will exit.
the main window will be closed when the file/playlist finishes.
This is SMPlayer v. %1 running on %2
tries to make a connection to another running instance and send to it the specified action. Example: -send-action pause The rest of options (if any) will be ignored and the application will exit. It will return 0 on success or -1 on failure.
action_list is a list of actions separated by spaces. The actions will be executed just after loading the file (if any) in the same order you entered. For checkable actions you can pass true or false as parameter. Example: -actions "fullscreen compact true". Quotes are necessary in case you pass more than one action.
media
if there's another instance running, the media will be added to that instance's playlist. If there's no other instance, this option will be ignored and the files will be opened in a new instance.
the main window won't be closed when the file/playlist finishes.
the video will be played in fullscreen mode.
the video will be played in window mode.
Enqueue in SMPlayer
opens the mini gui instead of the default one.
Restores the old associations and cleans up the registry.
Usage:
directory
action_name
action_list
opens the default gui.
subtitle_file
specifies the subtitle file to be loaded for the first video.
%n second(s)
%n minute(s)
%1 and %2
specifies the directory where smplayer will store its configuration files (smplayer.ini, smplayer_files.ini...)
disabled
aspect_ratio
auto
aspect_ratio
unknown
aspect_ratio
opens the mpc gui.
width
height
opens the gui with support for skins.
sets the stay on top option to always.
sets the stay on top option to never.
sets the media title for the first video.
specifies the coordinates where the main window will be displayed.
specifies the size of the main window.
'media' is any kind of file that SMPlayer can open. It can be a local file, a DVD (e.g. dvd://1), an Internet stream (e.g. mms://....) or a local playlist in format m3u or pls.
SMPlayer is my favorite media player for my PC. Check it out!
This text is to be published on twitter and the translation should not be more than 99 characters long
%1 (revision %2) %3
%1 (revision %2)
SeekWidget
icon
nishoncha
ShareDialog
Support SMPlayer
&Remind me later
Donate with PayPal
You can support SMPlayer by sending a donation or sharing it with your friends.
ShareWidget
Donate with PayPal
Share SMPlayer in Facebook
Share SMPlayer in Twitter
Support SMPlayer
Donate / Share SMPlayer with your friends
ShortcutGetter
Modify shortcut
Clear
Press the key combination you want to assign
Add shortcut
Remove shortcut
Capture
Capture keystrokes
ShutdownDialog
Shutting down computer
Playback has finished. SMPlayer is about to exit.
The computer will shut down in %1 seconds.
Press <b>Cancel</b> to abort shutdown.
SkinGui
&Toolbars
Status&bar
&Main toolbar
Edit main &toolbar
Edit &floating control
&Video info
&Scroll title
Playing
Pause
Stop
Stereo3dDialog
Stereo 3D filter
&3D format of the video:
&Output format:
Side by side parallel (left eye left, right eye right)
Side by side crosseye (right eye left, left eye right)
Side by side with half width resolution (left eye left, right eye right)
Side by side with half width resolution (right eye left, left eye right)
Above-below (left eye above, right eye below)
Above-below (right eye above, left eye below)
Above-below with half height resolution (left eye above, right eye below)
Above-below with half height resolution (right eye above, left eye below)
Anaglyph red/cyan gray
Anaglyph red/cyan half colored
Anaglyph red/cyan color
Anaglyph red/cyan color optimized with the least-squares projection of Dubois
Anaglyph green/magenta gray
Anaglyph green/magenta half colored
Anaglyph green/magenta colored
Anaglyph yellow/blue gray
Anaglyph yellow/blue half colored
Anaglyph yellow/blue colored
Interleaved rows (left eye has top row, right eye starts on next row)
Interleaved rows (right eye has top row, left eye starts on next row)
Mono output (left eye only)
Mono output (right eye only)
None
Auto
SubChooserDialog
Subtitle selection
This archive contains more than one subtitle file. Please choose the ones you want to extract.
Select All
Select None
TVList
Channel editor
TV/Radio list
TimeDialog
&Jump to:
SMPlayer - Seek
ToolbarEditor
Toolbar Editor
&Available actions:
&Left
&Right
&Down
&Up
Curre&nt actions:
&Icon size:
Add &separator
Time slider
Volume slider
Display time
Current time
Total time
Remaining time
3 in 1 rewind
3 in 1 forward
Quick access menu
TristateCombo
Auto
Yes
No
UpdateChecker
Failed to get the latest version number
New version available
A new version of SMPlayer is available.
Installed version: %1
Available version: %1
Would you like to know more about this new version?
Checking for updates
Congratulations, SMPlayer is up to date.
Error
Xato
An error happened while trying to retrieve information about the latest version available.
Error code: %1
VDPAUProperties
VDPAU Properties
Select the vdpau codecs to use. Not all of them may work.
&Disable software video filters
VideoEqualizer
Video Equalizer
&Contrast
&Brightness
&Hue
&Saturation
&Gamma
Software &equalizer
Set as &default values
&Reset
&Close
Use the current values as default values for new videos.
Set all controls to zero.
VideoPreview
Video preview
Cancel
&Close
&Save
&Saqlash
Thumbnail Generator
Creating thumbnails...
Size: %1 MB
Length: %1
FPS: %1
Audio format: %1
Save file
Error saving file
The file couldn't be saved
Faylni saqlab bo'lmadi
Error
Xato
The following error has occurred while creating the thumbnails:
The temporary directory (%1) can't be created
The mplayer process didn't run
Resolution: %1x%2
Video format: %1
Aspect ratio: %1
The file %1 can't be loaded
No filename
The mplayer process didn't start while trying to get info about the video
The length of the video is 0
The file %1 doesn't exist
Images
No info
%1 kbps
%1 Hz
Video bitrate: %1
Audio bitrate: %1
Audio rate: %1
VideoPreviewConfigDialog
Default
Thumbnail Generator
&File:
&Columns:
&Rows:
&Aspect ratio:
&Maximum width:
&OK
&Cancel
The preview will be created for the video you specify here.
The thumbnails will be arranged on a table.
This option specifies the number of columns of the table.
This option specifies the number of rows of the table.
If you check this option, the playing time will be displayed at the bottom of each thumbnail.
If the aspect ratio of the video is wrong, you can specify a different one here.
Usually the first frames are black, so it's a good idea to skip some seconds at the beginning of the video. This option allows to specify how many seconds will be skipped.
This option specifies the maximum width in pixels that the generated preview image will have.
Some frames will be extracted from the video in order to create the preview. Here you can choose the image format for the extracted frames. PNG may give better quality.
Add playing &time to thumbnails
&Seconds to skip at the beginning:
&Extract frames as
Enter here the DVD device or a folder with a DVD image.
&DVD device:
Remember folder used to &save the preview
VolumeControlPanel
Playlist
Fullscreen on/off
Video equalizer
VolumeSliderAction
Volume