diff options
Diffstat (limited to 'ltmain.sh')
| -rw-r--r--[-rwxr-xr-x] | ltmain.sh | 8448 |
1 files changed, 3496 insertions, 4952 deletions
diff --git a/ltmain.sh b/ltmain.sh index b612e9a..2bcb848 100755..100644 --- a/ltmain.sh +++ b/ltmain.sh @@ -1,83 +1,52 @@ -# Generated from ltmain.m4sh. - -# ltmain.sh (GNU libtool) 2.2.6 -# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun configure. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008 Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 +# +# This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but +# This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, -# or obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# Usage: $progname [OPTION]... [MODE-ARG]... -# -# Provide generalized library-building support services. +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print informational messages (default) -# --version print version information -# -h, --help print short or long help message -# -# MODE must be one of the following: -# -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory -# -# MODE-ARGS vary depending on the MODE. -# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -# -# When reporting a bug, please describe a test case to reproduce it and -# include the following information: -# -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.2.6 Debian-2.2.6a-1ubuntu1 -# automake: $automake_version -# autoconf: $autoconf_version -# -# Report bugs to <bug-libtool@gnu.org>. +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +basename="s,^.*/,,g" + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +progname=`echo "$progpath" | $SED $basename` +modename="$progname" + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 PROGRAM=ltmain.sh PACKAGE=libtool -VERSION="2.2.6 Debian-2.2.6a-1ubuntu1" -TIMESTAMP="" -package_revision=1.3012 +VERSION=1.5.26 +TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)" -# Be Bourne compatible +# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: @@ -91,261 +60,104 @@ fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh -# NLS nuisances: We save the old values to restore during execute mode. +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF +$* +EOF + exit $EXIT_SUCCESS +fi + +default_mode= +help="Try \`$progname --help' for more information." +magic="%%%MAGIC variable%%%" +mkdir="mkdir" +mv="mv -f" +rm="rm -f" + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + SP2NL='tr \040 \012' + NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + SP2NL='tr \100 \n' + NL2SP='tr \r\n \100\100' + ;; +esac + +# NLS nuisances. # Only set LANG and LC_ALL to C if already set. # These must not be set unconditionally because not all systems understand # e.g. LANG=C (notably SCO). -lt_user_locale= -lt_safe_locale= +# We save the old values to restore during execute mode. +lt_env= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then - save_$lt_var=\$$lt_var - $lt_var=C + save_$lt_var=\$$lt_var + lt_env=\"$lt_var=\$$lt_var \$lt_env\" + $lt_var=C export $lt_var - lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" - lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done -$lt_unset CDPATH - - - - - -: ${CP="cp -f"} -: ${ECHO="echo"} -: ${EGREP="/bin/grep -E"} -: ${FGREP="/bin/grep -F"} -: ${GREP="/bin/grep"} -: ${LN_S="ln -s"} -: ${MAKE="make"} -: ${MKDIR="mkdir"} -: ${MV="mv -f"} -: ${RM="rm -f"} -: ${SED="/bin/sed"} -: ${SHELL="${CONFIG_SHELL-/bin/sh}"} -: ${Xsed="$SED -e 1s/^X//"} - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -exit_status=$EXIT_SUCCESS +if test -n "$lt_env"; then + lt_env="env $lt_env" +fi # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" -dirname="s,/[^/]*$,," -basename="s,^.*/,," - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - -# Generated shell functions inserted here. - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" - -# The name of this program: -# In the unlikely event $progname began with a '-', it would play havoc with -# func_echo (imagine progname=-n), so we prepend ./ in that case: -func_dirname_and_basename "$progpath" -progname=$func_basename_result -case $progname in - -*) progname=./$progname ;; -esac - -# Make sure we have an absolute path for reexecution: -case $progpath in - [\\/]*|[A-Za-z]:\\*) ;; - *[\\/]*) - progdir=$func_dirname_result - progdir=`cd "$progdir" && pwd` - progpath="$progdir/$progname" - ;; - *) - save_IFS="$IFS" - IFS=: - for progdir in $PATH; do - IFS="$save_IFS" - test -x "$progdir/$progname" && break - done - IFS="$save_IFS" - test -n "$progdir" || progdir=`pwd` - progpath="$progdir/$progname" - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Re-`\' parameter expansions in output of double_quote_subst that were -# `\'-ed in input to the same. If an odd number of `\' preceded a '$' -# in input to double_quote_subst, that '$' was protected from expansion. -# Since each input `\' is now two `\'s, look for any number of runs of -# four `\'s followed by two `\'s and then a '$'. `\' that '$'. -bs='\\' -bs2='\\\\' -bs4='\\\\\\\\' -dollar='\$' -sed_double_backslash="\ - s/$bs4/&\\ -/g - s/^$bs2$dollar/$bs&/ - s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g - s/\n//g" - -# Standard options: -opt_dry_run=false -opt_help=false -opt_quiet=false -opt_verbose=false -opt_warning=: - -# func_echo arg... -# Echo program name prefixed message, along with the current mode -# name if it has been set yet. -func_echo () -{ - $ECHO "$progname${mode+: }$mode: $*" -} - -# func_verbose arg... -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $opt_verbose && func_echo ${1+"$@"} - - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : -} - -# func_error arg... -# Echo program name prefixed message to standard error. -func_error () -{ - $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 -} - -# func_warning arg... -# Echo program name prefixed warning message to standard error. -func_warning () -{ - $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 - - # bash bug again: - : -} - -# func_fatal_error arg... -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - func_error ${1+"$@"} - exit $EXIT_FAILURE -} - -# func_fatal_help arg... -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - func_error ${1+"$@"} - func_fatal_error "$help" -} -help="Try \`$progname --help' for more information." ## default - - -# func_grep expression filename -# Check whether EXPRESSION matches any line of FILENAME, without output. -func_grep () -{ - $GREP "$1" "$2" >/dev/null 2>&1 -} - - -# func_mkdir_p directory-path -# Make sure the entire path to DIRECTORY-PATH is available. -func_mkdir_p () -{ - my_directory_path="$1" - my_dir_list= - - if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then - - # Protect directory names starting with `-' - case $my_directory_path in - -*) my_directory_path="./$my_directory_path" ;; - esac - - # While some portion of DIR does not yet exist... - while test ! -d "$my_directory_path"; do - # ...make a list in topmost first order. Use a colon delimited - # list incase some portion of path contains whitespace. - my_dir_list="$my_directory_path:$my_dir_list" - - # If the last portion added has no slash in it, the list is done - case $my_directory_path in */*) ;; *) break ;; esac - - # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` - done - my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` - - save_mkdir_p_IFS="$IFS"; IFS=':' - for my_dir in $my_dir_list; do - IFS="$save_mkdir_p_IFS" - # mkdir can fail with a `File exist' error if two processes - # try to create one of the directories concurrently. Don't - # stop in that case! - $MKDIR "$my_dir" 2>/dev/null || : - done - IFS="$save_mkdir_p_IFS" +if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + $echo "$modename: not configured to build any kind of library" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE +fi - # Bail out if we (or some other process) failed to create a directory. - test -d "$my_directory_path" || \ - func_fatal_error "Failed to create \`$1'" - fi -} +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +duplicate_deps=no +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 +##################################### +# Shell function definitions: +# This seems to be the best place for them # func_mktempdir [string] # Make a temporary directory that won't clash with other running @@ -355,7 +167,7 @@ func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" - if test "$opt_dry_run" = ":"; then + if test "$run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else @@ -364,743 +176,486 @@ func_mktempdir () my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" - save_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$my_tmpdir" - umask $save_mktempdir_umask + save_mktempdir_umask=`umask` + umask 0077 + $mkdir "$my_tmpdir" + umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || \ - func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + test -d "$my_tmpdir" || { + $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 + exit $EXIT_FAILURE + } fi - $ECHO "X$my_tmpdir" | $Xsed + $echo "X$my_tmpdir" | $Xsed } -# func_quote_for_eval arg -# Aesthetically quote ARG to be evaled later. -# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -# is double-quoted, suitable for a subsequent eval, whereas -# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -# which are still active within double quotes backslashified. -func_quote_for_eval () +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () { - case $1 in - *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; - *) - func_quote_for_eval_unquoted_result="$1" ;; - esac - - case $func_quote_for_eval_unquoted_result in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and and variable - # expansion for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" - ;; - *) - func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ + $SED -n -e '1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; esac + ;; + esac + $echo $win32_libid_type } -# func_quote_for_expand arg -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () { - case $1 in - *[\\\`\"]*) - my_arg=`$ECHO "X$1" | $Xsed \ - -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. *) - my_arg="$1" ;; - esac - - case $my_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - my_arg="\"$my_arg\"" - ;; - esac - - func_quote_for_expand_result="$my_arg" -} - - -# func_show_eval cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$my_cmd" - my_status=$? - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case "$@ " in + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit $EXIT_FAILURE +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac fi } -# func_show_eval_locale cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () +# func_extract_an_archive dir oldlib +func_extract_an_archive () { - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" - if ${opt_dry_run-false}; then :; else - eval "$lt_user_locale - $my_cmd" - my_status=$? - eval "$lt_safe_locale" - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi + $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" + $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 + exit $EXIT_FAILURE fi } - - - - -# func_version -# Echo version message to standard output and exit. -func_version () -{ - $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { - s/^# // - s/^# *$// - s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ - p - }' < "$progpath" - exit $? -} - -# func_usage -# Echo short help message to standard output and exit. -func_usage () +# func_extract_archives gentop oldlib ... +func_extract_archives () { - $SED -n '/^# Usage:/,/# -h/ { - s/^# // - s/^# *$// - s/\$progname/'$progname'/ - p - }' < "$progpath" - $ECHO - $ECHO "run \`$progname --help | more' for full usage" - exit $? -} + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + my_status="" + + $show "${rm}r $my_gentop" + $run ${rm}r "$my_gentop" + $show "$mkdir $my_gentop" + $run $mkdir "$my_gentop" + my_status=$? + if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then + exit $my_status + fi -# func_help -# Echo long help message to standard output and exit. -func_help () -{ - $SED -n '/^# Usage:/,/# Report bugs to/ { - s/^# // - s/^# *$// - s*\$progname*'$progname'* - s*\$host*'"$host"'* - s*\$SHELL*'"$SHELL"'* - s*\$LTCC*'"$LTCC"'* - s*\$LTCFLAGS*'"$LTCFLAGS"'* - s*\$LD*'"$LD"'* - s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ - p - }' < "$progpath" - exit $? -} + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + extracted_serial=`expr $extracted_serial + 1` + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" -# func_missing_arg argname -# Echo program name prefixed message to standard error and set global -# exit_cmd. -func_missing_arg () -{ - func_error "missing argument for $1" - exit_cmd=exit + $show "${rm}r $my_xdir" + $run ${rm}r "$my_xdir" + $show "$mkdir $my_xdir" + $run $mkdir "$my_xdir" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then + exit $exit_status + fi + case $host in + *-darwin*) + $show "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + if test -z "$run"; then + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` + darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` + if test -n "$darwin_arches"; then + darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + $show "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we have a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + lipo -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + ${rm}r unfat-$$ + cd "$darwin_orig_dir" + else + cd "$darwin_orig_dir" + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + fi # $run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + func_extract_archives_result="$my_oldobjs" } +# End of Shell function definitions +##################################### -exit_cmd=: - +# Darwin sucks +eval std_shrext=\"$shrext_cmds\" +disable_libs=no - - -# Check that we have a working $ECHO. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell, and then maybe $ECHO will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo +# Parse our command line options once, thoroughly. +while test "$#" -gt 0 +do + arg="$1" shift - cat <<EOF -$* -EOF - exit $EXIT_SUCCESS -fi -magic="%%%MAGIC variable%%%" -magic_exe="%%%MAGIC EXE variable%%%" - -# Global variables. -# $mode is unset -nonopt= -execute_dlfiles= -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 + case $arg in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac -opt_dry_run=false -opt_duplicate_deps=false -opt_silent=false -opt_debug=: + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; + tag) + tagname="$arg" + preserve_args="${preserve_args}=$arg" + + # Check whether tagname contains only valid characters + case $tagname in + *[!-_A-Za-z0-9,/]*) + $echo "$progname: invalid tag name: $tagname" 1>&2 + exit $EXIT_FAILURE + ;; + esac -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= + case $tagname in + CC) + # Don't test for the "default" C tag, as we know, it's there, but + # not specially marked. + ;; + *) + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then + taglist="$taglist $tagname" + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" + else + $echo "$progname: ignoring unknown tag $tagname" 1>&2 + fi + ;; + esac + ;; + *) + eval "$prev=\$arg" + ;; + esac -# func_fatal_configuration arg... -# Echo program name prefixed message to standard error, followed by -# a configuration failure hint, and exit. -func_fatal_configuration () -{ - func_error ${1+"$@"} - func_error "See the $PACKAGE documentation for more information." - func_fatal_error "Fatal configuration error." -} + prev= + prevopt= + continue + fi + # Have we seen a non-optional argument yet? + case $arg in + --help) + show_help=yes + ;; -# func_config -# Display the configuration for all the tags in this script. -func_config () -{ - re_begincf='^# ### BEGIN LIBTOOL' - re_endcf='^# ### END LIBTOOL' + --version) + echo "\ +$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP - # Default configuration. - $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" +Copyright (C) 2008 Free Software Foundation, Inc. +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + exit $? + ;; + --config) + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath # Now print the configurations for the tags. for tagname in $taglist; do - $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" done - exit $? -} + ;; -# func_features -# Display the features supported by this script. -func_features () -{ - $ECHO "host: $host" + --debug) + $echo "$progname: enabling shell trace mode" + set -x + preserve_args="$preserve_args $arg" + ;; + + --dry-run | -n) + run=: + ;; + + --features) + $echo "host: $host" if test "$build_libtool_libs" = yes; then - $ECHO "enable shared libraries" + $echo "enable shared libraries" else - $ECHO "disable shared libraries" + $echo "disable shared libraries" fi if test "$build_old_libs" = yes; then - $ECHO "enable static libraries" + $echo "enable static libraries" else - $ECHO "disable static libraries" + $echo "disable static libraries" fi - exit $? -} + ;; -# func_enable_tag tagname -# Verify that TAGNAME is valid, and either flag an error and exit, or -# enable the TAGNAME tag. We also add TAGNAME to the global $taglist -# variable here. -func_enable_tag () -{ - # Global variable: - tagname="$1" + --finish) mode="finish" ;; - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf="/$re_begincf/,/$re_endcf/p" + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac + --preserve-dup-deps) duplicate_deps="yes" ;; - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; - *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" - - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac -} - -# Parse options once, thoroughly. This comes as soon as possible in -# the script to make things like `libtool --version' happen quickly. -{ - - # Shorthand for --mode=foo, only valid as the first argument - case $1 in - clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; - compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift + --quiet | --silent) + show=: + preserve_args="$preserve_args $arg" ;; - execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift + + --tag) + prevopt="--tag" + prev=tag + preserve_args="$preserve_args --tag" ;; - finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift + --tag=*) + set tag "$optarg" ${1+"$@"} + shift + prev=tag + preserve_args="$preserve_args --tag" ;; - install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles ;; - link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE ;; - uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift + + *) + nonopt="$arg" + break ;; esac +done - # Parse non-mode specific arguments: - while test "$#" -gt 0; do - opt="$1" - shift - - case $opt in - --config) func_config ;; - - --debug) preserve_args="$preserve_args $opt" - func_echo "enabling shell trace mode" - opt_debug='set -x' - $opt_debug - ;; - - -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break - execute_dlfiles="$execute_dlfiles $1" - shift - ;; - - --dry-run | -n) opt_dry_run=: ;; - --features) func_features ;; - --finish) mode="finish" ;; - - --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break - case $1 in - # Valid mode arguments: - clean) ;; - compile) ;; - execute) ;; - finish) ;; - install) ;; - link) ;; - relink) ;; - uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; - esac - - mode="$1" - shift - ;; - - --preserve-dup-deps) - opt_duplicate_deps=: ;; - - --quiet|--silent) preserve_args="$preserve_args $opt" - opt_silent=: - ;; - - --verbose| -v) preserve_args="$preserve_args $opt" - opt_silent=false - ;; - - --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break - preserve_args="$preserve_args $opt $1" - func_enable_tag "$1" # tagname is set here - shift - ;; - - # Separate optargs to long options: - -dlopen=*|--mode=*|--tag=*) - func_opt_split "$opt" - set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} - shift - ;; - - -\?|-h) func_usage ;; - --help) opt_help=: ;; - --version) func_version ;; +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE +fi - -*) func_fatal_help "unrecognized option \`$opt'" ;; +case $disable_libs in +no) + ;; +shared) + build_libtool_libs=no + build_old_libs=yes + ;; +static) + build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` + ;; +esac - *) nonopt="$opt" - break - ;; - esac - done +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= +if test -z "$show_help"; then - case $host in - *cygwin* | *mingw* | *pw32* | *cegcc*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: + # Infer the operation mode. + if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 + $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 + case $nonopt in + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link + for arg + do + case $arg in + -c) + mode=compile + break + ;; + esac + done ;; - *) - opt_duplicate_compiler_generated_deps=$opt_duplicate_deps + *db | *dbx | *strace | *truss) + mode=execute ;; - esac - - # Having warned about all mis-specified options, bail out if - # anything was wrong. - $exit_cmd $EXIT_FAILURE -} + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute -# func_check_version_match -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () -{ - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -## ----------- ## -## Main. ## -## ----------- ## - -$opt_help || { - # Sanity checks first: - func_check_version_match - - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" + ;; + esac fi - test -z "$mode" && func_fatal_error "error: you must specify a MODE." - - - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - - # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" - help="Try \`$progname --help --mode=$mode' for more information." -} - - -# func_lalib_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_lalib_p () -{ - test -f "$1" && - $SED -e 4q "$1" 2>/dev/null \ - | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 -} - -# func_lalib_unsafe_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. -# This function implements the same check as func_lalib_p without -# resorting to external programs. To this end, it redirects stdin and -# closes it afterwards, without saving the original file descriptor. -# As a safety measure, use it only where a negative result would be -# fatal anyway. Works if `file' does not exist. -func_lalib_unsafe_p () -{ - lalib_p=no - if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then - for lalib_p_l in 1 2 3 4 - do - read lalib_p_line - case "$lalib_p_line" in - \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; - esac - done - exec 0<&5 5<&- - fi - test "$lalib_p" = yes -} - -# func_ltwrapper_script_p file -# True iff FILE is a libtool wrapper script -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_script_p () -{ - func_lalib_p "$1" -} - -# func_ltwrapper_executable_p file -# True iff FILE is a libtool wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_executable_p () -{ - func_ltwrapper_exec_suffix= - case $1 in - *.exe) ;; - *) func_ltwrapper_exec_suffix=.exe ;; - esac - $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 -} - -# func_ltwrapper_scriptname file -# Assumes file is an ltwrapper_executable -# uses $file to determine the appropriate filename for a -# temporary ltwrapper_script. -func_ltwrapper_scriptname () -{ - func_ltwrapper_scriptname_result="" - if func_ltwrapper_executable_p "$1"; then - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" - fi -} - -# func_ltwrapper_p file -# True iff FILE is a libtool wrapper script or wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_p () -{ - func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" -} - - -# func_execute_cmds commands fail_cmd -# Execute tilde-delimited COMMANDS. -# If FAIL_CMD is given, eval that upon failure. -# FAIL_CMD may read-access the current command in variable CMD! -func_execute_cmds () -{ - $opt_debug - save_ifs=$IFS; IFS='~' - for cmd in $1; do - IFS=$save_ifs - eval cmd=\"$cmd\" - func_show_eval "$cmd" "${2-:}" - done - IFS=$save_ifs -} + help="Try \`$modename --help --mode=$mode' for more information." - -# func_source file -# Source FILE, adding directory component if necessary. -# Note that it is not necessary on cygwin/mingw to append a dot to -# FILE even if both FILE and FILE.exe exist: automatic-append-.exe -# behavior happens only for exec(3), not for open(2)! Also, sourcing -# `FILE.' does not work on cygwin managed mounts. -func_source () -{ - $opt_debug - case $1 in - */* | *\\*) . "$1" ;; - *) . "./$1" ;; - esac -} - - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () -{ - $opt_debug - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - func_quote_for_eval "$arg" - CC_quoted="$CC_quoted $func_quote_for_eval_result" - done - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - func_quote_for_eval "$arg" - CC_quoted="$CC_quoted $func_quote_for_eval_result" - done - case "$@ " in - " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with \`--tag'" -# else -# func_verbose "using $tagname tagged configuration" - fi - ;; - esac - fi -} - - - -# func_write_libtool_object output_name pic_name nonpic_name -# Create a libtool object file (analogous to a ".la" file), -# but don't create it if we're doing a dry run. -func_write_libtool_object () -{ - write_libobj=${1} - if test "$build_libtool_libs" = yes; then - write_lobj=\'${2}\' - else - write_lobj=none - fi - - if test "$build_old_libs" = yes; then - write_oldobj=\'${3}\' - else - write_oldobj=none - fi - - $opt_dry_run || { - cat >${write_libobj}T <<EOF -# $write_libobj - a libtool object file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# Name of the PIC object. -pic_object=$write_lobj - -# Name of the non-PIC object -non_pic_object=$write_oldobj - -EOF - $MV "${write_libobj}T" "${write_libobj}" - } -} - -# func_mode_compile arg... -func_mode_compile () -{ - $opt_debug + # These modes are in order of execution frequency so that they run quickly. + case $mode in + # libtool compile mode + compile) + modename="$modename: compile" # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" @@ -1109,7 +664,6 @@ func_mode_compile () arg_mode=normal libobj= later= - pie_flag= for arg do @@ -1130,18 +684,15 @@ func_mode_compile () # Accept any command-line options. case $arg in -o) - test -n "$libobj" && \ - func_fatal_error "you cannot specify \`-o' more than once" + if test -n "$libobj" ; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit $EXIT_FAILURE + fi arg_mode=target continue ;; - -pie | -fpie | -fPIE) - pie_flag="$pie_flag $arg" - continue - ;; - - -shared | -static | -prefer-pic | -prefer-non-pic) + -static | -prefer-pic | -prefer-non-pic) later="$later $arg" continue ;; @@ -1157,25 +708,31 @@ func_mode_compile () ;; # replaced later. I would guess that would be a bug. -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` lastarg= save_ifs="$IFS"; IFS=',' - for arg in $args; do + for arg in $args; do IFS="$save_ifs" - func_quote_for_eval "$arg" - lastarg="$lastarg $func_quote_for_eval_result" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" done IFS="$save_ifs" - func_stripname ' ' '' "$lastarg" - lastarg=$func_stripname_result + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` # Add the arguments to base_compile. base_compile="$base_compile $lastarg" continue ;; - *) + * ) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # @@ -1187,42 +744,66 @@ func_mode_compile () esac # case $arg_mode # Aesthetically quote the previous argument. - func_quote_for_eval "$lastarg" - base_compile="$base_compile $func_quote_for_eval_result" + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, and some SunOS ksh mistreat backslash-escaping + # in scan sets (worked around with variable expansion), + # and furthermore cannot handle '|' '&' '(' ')' in scan sets + # at all, so we specify them separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + + base_compile="$base_compile $lastarg" done # for arg case $arg_mode in arg) - func_fatal_error "you must specify an argument for -Xcompile" + $echo "$modename: you must specify an argument for -Xcompile" + exit $EXIT_FAILURE ;; target) - func_fatal_error "you must specify a target with \`-o'" + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit $EXIT_FAILURE ;; *) # Get the name of the library object. - test -z "$libobj" && { - func_basename "$srcfile" - libobj="$func_basename_result" - } + [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSifmso]' case $libobj in - *.[cCFSifmso] | \ - *.ada | *.adb | *.ads | *.asm | \ - *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.obj | *.sx) - func_xform "$libobj" - libobj=$func_xform_result - ;; + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.ii) xform=ii ;; + *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.[fF][09]?) xform=[fF][09]. ;; + *.for) xform=for ;; + *.java) xform=java ;; + *.obj) xform=obj ;; + *.sx) xform=sx ;; esac + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + case $libobj in - *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) - func_fatal_error "cannot determine name of library object from \`$libobj'" + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit $EXIT_FAILURE ;; esac @@ -1230,15 +811,7 @@ func_mode_compile () for arg in $later; do case $arg in - -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" - build_old_libs=no - continue - ;; - -static) - build_libtool_libs=no build_old_libs=yes continue ;; @@ -1255,17 +828,28 @@ func_mode_compile () esac done - func_quote_for_eval "$libobj" - test "X$libobj" != "X$func_quote_for_eval_result" \ - && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && func_warning "libobj name \`$libobj' may not contain shell special characters." - func_dirname_and_basename "$obj" "/" "" - objname="$func_basename_result" - xdir="$func_dirname_result" + qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` + case $qlibobj in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qlibobj="\"$qlibobj\"" ;; + esac + test "X$libobj" != "X$qlibobj" \ + && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir= + else + xdir=$xdir/ + fi lobj=${xdir}$objdir/$objname - test -z "$base_compile" && \ - func_fatal_help "you must specify a compilation command" + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then @@ -1274,9 +858,12 @@ func_mode_compile () removelist="$lobj $libobj ${libobj}T" fi + $run $rm $removelist + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in - cygwin* | mingw* | pw32* | os2* | cegcc*) + cygwin* | mingw* | pw32* | os2*) pic_mode=default ;; esac @@ -1288,8 +875,10 @@ func_mode_compile () # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 else output_obj= need_locks=no @@ -1299,13 +888,13 @@ func_mode_compile () # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" + until $run ln "$progpath" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then - $ECHO "\ + $echo "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` @@ -1316,22 +905,34 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $opt_dry_run || $RM $removelist + $run $rm $removelist exit $EXIT_FAILURE fi - removelist="$removelist $output_obj" - $ECHO "$srcfile" > "$lockfile" + $echo "$srcfile" > "$lockfile" fi - $opt_dry_run || $RM $removelist - removelist="$removelist $lockfile" - trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result + qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` + case $qsrcfile in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qsrcfile="\"$qsrcfile\"" ;; + esac + + $run $rm "$libobj" "${libobj}T" + + # Create a libtool object file (analogous to a ".la" file), + # but don't create it if we're doing a dry run. + test -z "$run" && cat > ${libobj}T <<EOF +# $libobj - a libtool object file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# Name of the PIC object. +EOF # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then @@ -1345,19 +946,32 @@ compiler." command="$base_compile $qsrcfile" fi - func_mkdir_p "$xdir$objdir" + if test ! -d "${xdir}$objdir"; then + $show "$mkdir ${xdir}$objdir" + $run $mkdir ${xdir}$objdir + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then + exit $exit_status + fi + fi if test -z "$output_obj"; then # Place PIC objects in $objdir command="$command -o $lobj" fi - func_show_eval_locale "$command" \ - 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + $run $rm "$lobj" "$output_obj" + + $show "$command" + if $run eval $lt_env "$command"; then : + else + test -n "$output_obj" && $run $rm $removelist + exit $EXIT_FAILURE + fi if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ + $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -1371,27 +985,45 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $opt_dry_run || $RM $removelist + $run $rm $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - func_show_eval '$MV "$output_obj" "$lobj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + $show "$mv $output_obj $lobj" + if $run $mv $output_obj $lobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi fi + # Append the name of the PIC object to the libtool object file. + test -z "$run" && cat >> ${libobj}T <<EOF +pic_object='$objdir/$objname' + +EOF + # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then - suppress_output=' >/dev/null 2>&1' + suppress_output=' >/dev/null 2>&1' fi + else + # No PIC object so indicate it doesn't exist in the libtool + # object file. + test -z "$run" && cat >> ${libobj}T <<EOF +pic_object=none + +EOF fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code - command="$base_compile $qsrcfile$pie_flag" + command="$base_compile $qsrcfile" else command="$base_compile $qsrcfile $pic_flag" fi @@ -1401,12 +1033,17 @@ compiler." # Suppress compiler output if we already did a PIC compilation. command="$command$suppress_output" - func_show_eval_locale "$command" \ - '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + $run $rm "$obj" "$output_obj" + $show "$command" + if $run eval $lt_env "$command"; then : + else + $run $rm $removelist + exit $EXIT_FAILURE + fi if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ + $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -1420,2620 +1057,53 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $opt_dry_run || $RM $removelist + $run $rm $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - func_show_eval '$MV "$output_obj" "$obj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - fi - - $opt_dry_run || { - func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - removelist=$lockfile - $RM "$lockfile" - fi - } - - exit $EXIT_SUCCESS -} - -$opt_help || { -test "$mode" = compile && func_mode_compile ${1+"$@"} -} - -func_mode_help () -{ - # We need to display help for each of the modes. - case $mode in - "") - # Generic help is extracted from the usage comments - # at the start of this file. - func_help - ;; - - clean) - $ECHO \ -"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - - compile) - $ECHO \ -"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -shared do not build a \`.o' file suitable for static linking - -static only build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - - execute) - $ECHO \ -"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - - finish) - $ECHO \ -"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - - install) - $ECHO \ -"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The following components of INSTALL-COMMAND are treated specially: - - -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - - link) - $ECHO \ -"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -shared only do dynamic linking of libtool libraries - -shrext SUFFIX override the standard shared library file extension - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -weak LIBNAME declare that the target provides the LIBNAME interface - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - - uninstall) - $ECHO \ -"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - - *) - func_fatal_help "invalid operation mode \`$mode'" - ;; - esac - - $ECHO - $ECHO "Try \`$progname --help' for more information about other modes." - - exit $? -} - - # Now that we've collected a possible --mode arg, show help if necessary - $opt_help && func_mode_help - - -# func_mode_execute arg... -func_mode_execute () -{ - $opt_debug - # The first argument is the command name. - cmd="$nonopt" - test -z "$cmd" && \ - func_fatal_help "you must specify a COMMAND" - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - test -f "$file" \ - || func_fatal_help "\`$file' is not a file" - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$lib' is not a valid libtool archive" - - # Read the libtool library. - dlname= - library_names= - func_source "$file" - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && \ - func_warning "\`$file' was not linked with \`-export-dynamic'" - continue - fi - - func_dirname "$file" "" "." - dir="$func_dirname_result" - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : else - if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" - fi - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - func_dirname "$file" "" "." - dir="$func_dirname_result" - ;; - - *) - func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if func_ltwrapper_script_p "$file"; then - func_source "$file" - # Transform arg to wrapped name. - file="$progdir/$program" - elif func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - func_source "$func_ltwrapper_scriptname_result" - # Transform arg to wrapped name. - file="$progdir/$program" + error=$? + $run $rm $removelist + exit $error fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - func_quote_for_eval "$file" - args="$args $func_quote_for_eval_result" - done - - if test "X$opt_dry_run" = Xfalse; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" fi - # Restore saved environment variables - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - else - $lt_unset $lt_var - fi" - done + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <<EOF +# Name of the non-PIC object. +non_pic_object='$objname' - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" +EOF else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - $ECHO "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS - fi -} + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <<EOF +# Name of the non-PIC object. +non_pic_object=none -test "$mode" = execute && func_mode_execute ${1+"$@"} - - -# func_mode_finish arg... -func_mode_finish () -{ - $opt_debug - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - func_execute_cmds "$finish_cmds" 'admincmds="$admincmds -'"$cmd"'"' - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done +EOF fi - # Exit here if they wanted silent mode. - $opt_silent && exit $EXIT_SUCCESS - - $ECHO "X----------------------------------------------------------------------" | $Xsed - $ECHO "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - $ECHO - $ECHO "If you ever happen to want to link against installed libraries" - $ECHO "in a given directory, LIBDIR, you must either use libtool, and" - $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" - $ECHO "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" - $ECHO " during execution" - fi - if test -n "$runpath_var"; then - $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" - $ECHO " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" + $run $mv "${libobj}T" "${libobj}" - $ECHO " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $run $rm "$lockfile" fi - $ECHO - $ECHO "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" - $ECHO "pages." - ;; - *) - $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - $ECHO "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS -} - -test "$mode" = finish && func_mode_finish ${1+"$@"} - - -# func_mode_install arg... -func_mode_install () -{ - $opt_debug - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $ECHO "X$nonopt" | $GREP shtool >/dev/null; then - # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " - arg=$1 - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - func_quote_for_eval "$arg" - install_prog="$install_prog$func_quote_for_eval_result" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac - ;; - -g | -m | -o) - prev=$arg - ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - func_quote_for_eval "$arg" - install_prog="$install_prog $func_quote_for_eval_result" - done - - test -z "$install_prog" && \ - func_fatal_help "you must specify an install program" - - test -n "$prev" && \ - func_fatal_help "the \`$prev' option requires an argument" - - if test -z "$files"; then - if test -z "$dest"; then - func_fatal_help "no file or destination specified" - else - func_fatal_help "you must specify a destination" - fi - fi - - # Strip any trailing slash from the destination. - func_stripname '' '/' "$dest" - dest=$func_stripname_result - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - func_dirname_and_basename "$dest" "" "." - destdir="$func_dirname_result" - destname="$func_basename_result" - - # Not a directory, so check to see that there is only one file specified. - set dummy $files; shift - test "$#" -gt 1 && \ - func_fatal_help "\`$dest' is not a directory" - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - func_fatal_help "\`$destdir' must be an absolute directory name" - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$file' is not a valid libtool archive" - - library_names= - old_library= - relink_command= - func_source "$file" - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - func_dirname "$file" "/" "" - dir="$func_dirname_result" - dir="$dir$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` - fi - - func_warning "relinking \`$file'" - func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' - fi - - # See the names of the shared library. - set dummy $library_names; shift - if test -n "$1"; then - realname="$1" - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ - 'exit $?' - tstripme="$stripme" - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - case $realname in - *.dll.a) - tstripme="" - ;; - esac - ;; - esac - if test -n "$tstripme" && test -n "$striplib"; then - func_show_eval "$striplib $destdir/$realname" 'exit $?' - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - test "$linkname" != "$realname" \ - && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - func_execute_cmds "$postinstall_cmds" 'exit $?' - fi - - # Install the pseudo-library for information purposes. - func_basename "$file" - name="$func_basename_result" - instname="$dir/$name"i - func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - func_lo2o "$destfile" - staticdest=$func_lo2o_result - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - func_fatal_help "cannot copy a libtool object to \`$destfile'" - ;; - esac - - # Install the libtool object if requested. - test -n "$destfile" && \ - func_show_eval "$install_prog $file $destfile" 'exit $?' - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - func_lo2o "$file" - staticobj=$func_lo2o_result - func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - func_stripname '' '.exe' "$file" - file=$func_stripname_result - stripped_ext=".exe" - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin* | *mingw*) - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - wrapper=$func_ltwrapper_scriptname_result - else - func_stripname '' '.exe' "$file" - wrapper=$func_stripname_result - fi - ;; - *) - wrapper=$file - ;; - esac - if func_ltwrapper_script_p "$wrapper"; then - notinst_deplibs= - relink_command= - - func_source "$wrapper" - - # Check the variables that should have been set. - test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script \`$wrapper'" - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - func_source "$lib" - fi - libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "\`$lib' has not been installed in \`$libdir'" - finalize=no - fi - done - - relink_command= - func_source "$wrapper" - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - $opt_dry_run || { - if test "$finalize" = yes; then - tmpdir=`func_mktempdir` - func_basename "$file$stripped_ext" - file="$func_basename_result" - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $opt_silent || { - func_quote_for_expand "$relink_command" - eval "func_echo $func_quote_for_expand_result" - } - if eval "$relink_command"; then : - else - func_error "error: relink \`$file' with the above command before installing it" - $opt_dry_run || ${RM}r "$tmpdir" - continue - fi - file="$outputname" - else - func_warning "cannot relink \`$file'" - fi - } - else - # Install the binary that we compiled earlier. - file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - func_stripname '' '.exe' "$destfile" - destfile=$func_stripname_result - ;; - esac - ;; - esac - func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' - $opt_dry_run || if test -n "$outputname"; then - ${RM}r "$tmpdir" - fi - ;; - esac - done - - for file in $staticlibs; do - func_basename "$file" - name="$func_basename_result" - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - func_show_eval "$install_prog \$file \$oldlib" 'exit $?' - - if test -n "$stripme" && test -n "$old_striplib"; then - func_show_eval "$old_striplib $oldlib" 'exit $?' - fi - - # Do each command in the postinstall commands. - func_execute_cmds "$old_postinstall_cmds" 'exit $?' - done - - test -n "$future_libdirs" && \ - func_warning "remember to run \`$progname --finish$future_libdirs'" - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi -} - -test "$mode" = install && func_mode_install ${1+"$@"} - - -# func_generate_dlsyms outputname originator pic_p -# Extract symbols from dlprefiles and create ${outputname}S.o with -# a dlpreopen symbol table. -func_generate_dlsyms () -{ - $opt_debug - my_outputname="$1" - my_originator="$2" - my_pic_p="${3-no}" - my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` - my_dlsyms= - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms="${my_outputname}S.c" - else - func_error "not configured to extract global symbols from dlpreopened files" - fi - fi - - if test -n "$my_dlsyms"; then - case $my_dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${my_outputname}.nm" - - func_show_eval "$RM $nlist ${nlist}S ${nlist}T" - - # Parse the name list into a source file. - func_verbose "creating $output_objdir/$my_dlsyms" - - $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - func_verbose "generating symbol list for \`$output'" - - $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for progfile in $progfiles; do - func_verbose "extracting global C symbols from \`$progfile'" - $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $opt_dry_run || { - eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - if test -n "$export_symbols_regex"; then - $opt_dry_run || { - eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" - $opt_dry_run || { - $RM $export_symbols - eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - } - else - $opt_dry_run || { - eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - case $host in - *cygwin | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - } - fi - fi - - for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from \`$dlprefile'" - func_basename "$dlprefile" - name="$func_basename_result" - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - done - - $opt_dry_run || { - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $MV "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if $GREP -v "^: " < "$nlist" | - if sort -k 3 </dev/null >/dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - $GREP -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' - else - $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" - fi - - $ECHO >> "$output_objdir/$my_dlsyms" "\ - -/* The mapping between symbol names and symbols. */ -typedef struct { - const char *name; - void *address; -} lt_dlsymlist; -" - case $host in - *cygwin* | *mingw* | *cegcc* ) - $ECHO >> "$output_objdir/$my_dlsyms" "\ -/* DATA imports from DLLs on WIN32 con't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs. */" - lt_dlsym_const= ;; - *osf5*) - echo >> "$output_objdir/$my_dlsyms" "\ -/* This system does not cope well with relocations in const data */" - lt_dlsym_const= ;; - *) - lt_dlsym_const=const ;; - esac - - $ECHO >> "$output_objdir/$my_dlsyms" "\ -extern $lt_dlsym_const lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[]; -$lt_dlsym_const lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[] = -{\ - { \"$my_originator\", (void *) 0 }," - - case $need_lib_prefix in - no) - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - *) - eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - esac - $ECHO >> "$output_objdir/$my_dlsyms" "\ - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_${my_prefix}_LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - } # !$opt_dry_run - - pic_flag_for_symtable= - case "$compile_command " in - *" -static "*) ;; - *) - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; - *-*-hpux*) - pic_flag_for_symtable=" $pic_flag" ;; - *) - if test "X$my_pic_p" != Xno; then - pic_flag_for_symtable=" $pic_flag" - fi - ;; - esac - ;; - esac - symtab_cflags= - for arg in $LTCFLAGS; do - case $arg in - -pie | -fpie | -fPIE) ;; - *) symtab_cflags="$symtab_cflags $arg" ;; - esac - done - - # Now compile the dynamic symbol file. - func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' - - # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' - - # Transform the symbol file into the correct name. - symfileobj="$output_objdir/${my_outputname}S.$objext" - case $host in - *cygwin* | *mingw* | *cegcc* ) - if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - else - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - fi - ;; - *) - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - ;; - esac - ;; - *) - func_fatal_error "unknown suffix for \`$my_dlsyms'" - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi -} - -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -func_win32_libid () -{ - $opt_debug - win32_libid_type="unknown" - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | - $SED -n -e ' - 1,100{ - / I /{ - s,.*,import, - p - q - } - }'` - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac - fi ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac - ;; - esac - $ECHO "$win32_libid_type" -} - - - -# func_extract_an_archive dir oldlib -func_extract_an_archive () -{ - $opt_debug - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" - fi -} - - -# func_extract_archives gentop oldlib ... -func_extract_archives () -{ - $opt_debug - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - func_basename "$my_xlib" - my_xlib="$func_basename_result" - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - func_arith $extracted_serial + 1 - extracted_serial=$func_arith_result - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" - - func_mkdir_p "$my_xdir" - - case $host in - *-darwin*) - func_verbose "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - $opt_dry_run || { - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`basename "$darwin_archive"` - darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` - if test -n "$darwin_arches"; then - darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" - cd "$darwin_curdir" - $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" - done # $darwin_arches - ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` - $LIPO -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - $RM -rf unfat-$$ - cd "$darwin_orig_dir" - else - cd $darwin_orig_dir - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - } # !$opt_dry_run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - - func_extract_archives_result="$my_oldobjs" -} - - - -# func_emit_wrapper_part1 [arg=no] -# -# Emit the first part of a libtool wrapper script on stdout. -# For more information, see the description associated with -# func_emit_wrapper(), below. -func_emit_wrapper_part1 () -{ - func_emit_wrapper_part1_arg1=no - if test -n "$1" ; then - func_emit_wrapper_part1_arg1=$1 - fi - - $ECHO "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# Be Bourne compatible -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variables: - generated_by_libtool_version='$macro_version' - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$ECHO are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - ECHO=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$ECHO works! - : - else - # Restart under the correct shell, and then maybe \$ECHO will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $ECHO "\ - - # Find the directory that this script lives in. - thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done -" -} -# end: func_emit_wrapper_part1 - -# func_emit_wrapper_part2 [arg=no] -# -# Emit the second part of a libtool wrapper script on stdout. -# For more information, see the description associated with -# func_emit_wrapper(), below. -func_emit_wrapper_part2 () -{ - func_emit_wrapper_part2_arg1=no - if test -n "$1" ; then - func_emit_wrapper_part2_arg1=$1 - fi - - $ECHO "\ - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 - if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then - # special case for '.' - if test \"\$thisdir\" = \".\"; then - thisdir=\`pwd\` - fi - # remove .libs from thisdir - case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; - $objdir ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - $ECHO "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $MKDIR \"\$progdir\" - else - $RM \"\$progdir/\$file\" - fi" - - $ECHO "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $ECHO \"\$relink_command_output\" >&2 - $RM \"\$progdir/\$file\" - exit 1 - fi - fi - - $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $RM \"\$progdir/\$program\"; - $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $RM \"\$progdir/\$file\" - fi" - else - $ECHO "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $ECHO "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $ECHO "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $ECHO "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) - $ECHO "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 - fi - else - # The program doesn't exist. - \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" -} -# end: func_emit_wrapper_part2 - - -# func_emit_wrapper [arg=no] -# -# Emit a libtool wrapper script on stdout. -# Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variables -# set therein. -# -# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is -# the $objdir directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=no - if test -n "$1" ; then - func_emit_wrapper_arg1=$1 - fi - - # split this up so that func_emit_cwrapperexe_src - # can call each part independently. - func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" - func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" -} - - -# func_to_host_path arg -# -# Convert paths to host format when used with build tools. -# Intended for use with "native" mingw (where libtool itself -# is running under the msys shell), or in the following cross- -# build environments: -# $build $host -# mingw (msys) mingw [e.g. native] -# cygwin mingw -# *nix + wine mingw -# where wine is equipped with the `winepath' executable. -# In the native mingw case, the (msys) shell automatically -# converts paths for any non-msys applications it launches, -# but that facility isn't available from inside the cwrapper. -# Similar accommodations are necessary for $host mingw and -# $build cygwin. Calling this function does no harm for other -# $host/$build combinations not listed above. -# -# ARG is the path (on $build) that should be converted to -# the proper representation for $host. The result is stored -# in $func_to_host_path_result. -func_to_host_path () -{ - func_to_host_path_result="$1" - if test -n "$1" ; then - case $host in - *mingw* ) - lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - case $build in - *mingw* ) # actually, msys - # awkward: cmd appends spaces to result - lt_sed_strip_trailing_spaces="s/[ ]*\$//" - func_to_host_path_tmp1=`( cmd //c echo "$1" |\ - $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` - func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - *cygwin* ) - func_to_host_path_tmp1=`cygpath -w "$1"` - func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - * ) - # Unfortunately, winepath does not exit with a non-zero - # error code, so we are forced to check the contents of - # stdout. On the other hand, if the command is not - # found, the shell will set an exit code of 127 and print - # *an error message* to stdout. So we must check for both - # error code of zero AND non-empty stdout, which explains - # the odd construction: - func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` - if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then - func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ - $SED -e "$lt_sed_naive_backslashify"` - else - # Allow warning below. - func_to_host_path_result="" - fi - ;; - esac - if test -z "$func_to_host_path_result" ; then - func_error "Could not determine host path corresponding to" - func_error " '$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback: - func_to_host_path_result="$1" - fi - ;; - esac - fi -} -# end: func_to_host_path - -# func_to_host_pathlist arg -# -# Convert pathlists to host format when used with build tools. -# See func_to_host_path(), above. This function supports the -# following $build/$host combinations (but does no harm for -# combinations not listed here): -# $build $host -# mingw (msys) mingw [e.g. native] -# cygwin mingw -# *nix + wine mingw -# -# Path separators are also converted from $build format to -# $host format. If ARG begins or ends with a path separator -# character, it is preserved (but converted to $host format) -# on output. -# -# ARG is a pathlist (on $build) that should be converted to -# the proper representation on $host. The result is stored -# in $func_to_host_pathlist_result. -func_to_host_pathlist () -{ - func_to_host_pathlist_result="$1" - if test -n "$1" ; then - case $host in - *mingw* ) - lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - # Remove leading and trailing path separator characters from - # ARG. msys behavior is inconsistent here, cygpath turns them - # into '.;' and ';.', and winepath ignores them completely. - func_to_host_pathlist_tmp2="$1" - # Once set for this call, this variable should not be - # reassigned. It is used in tha fallback case. - func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ - $SED -e 's|^:*||' -e 's|:*$||'` - case $build in - *mingw* ) # Actually, msys. - # Awkward: cmd appends spaces to result. - lt_sed_strip_trailing_spaces="s/[ ]*\$//" - func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ - $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` - func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - *cygwin* ) - func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` - func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - * ) - # unfortunately, winepath doesn't convert pathlists - func_to_host_pathlist_result="" - func_to_host_pathlist_oldIFS=$IFS - IFS=: - for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do - IFS=$func_to_host_pathlist_oldIFS - if test -n "$func_to_host_pathlist_f" ; then - func_to_host_path "$func_to_host_pathlist_f" - if test -n "$func_to_host_path_result" ; then - if test -z "$func_to_host_pathlist_result" ; then - func_to_host_pathlist_result="$func_to_host_path_result" - else - func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" - fi - fi - fi - IFS=: - done - IFS=$func_to_host_pathlist_oldIFS - ;; - esac - if test -z "$func_to_host_pathlist_result" ; then - func_error "Could not determine the host path(s) corresponding to" - func_error " '$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback. This may break if $1 contains DOS-style drive - # specifications. The fix is not to complicate the expression - # below, but for the user to provide a working wine installation - # with winepath so that path translation in the cross-to-mingw - # case works properly. - lt_replace_pathsep_nix_to_dos="s|:|;|g" - func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ - $SED -e "$lt_replace_pathsep_nix_to_dos"` - fi - # Now, add the leading and trailing path separators back - case "$1" in - :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" - ;; - esac - case "$1" in - *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" - ;; - esac - ;; - esac - fi -} -# end: func_to_host_pathlist - -# func_emit_cwrapperexe_src -# emit the source code for a wrapper executable on stdout -# Must ONLY be called from within func_mode_link because -# it depends on a number of variable set therein. -func_emit_cwrapperexe_src () -{ - cat <<EOF - -/* $cwrappersource - temporary wrapper executable for $objdir/$outputname - Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION - - The $output program cannot be directly executed until all the libtool - libraries that it depends on are installed. - - This wrapper executable should never be moved out of the build directory. - If it is, it will not operate correctly. - - Currently, it simply execs the wrapper *script* "$SHELL $output", - but could eventually absorb all of the scripts functionality and - exec $objdir/$outputname directly. -*/ -EOF - cat <<"EOF" -#include <stdio.h> -#include <stdlib.h> -#ifdef _MSC_VER -# include <direct.h> -# include <process.h> -# include <io.h> -# define setmode _setmode -#else -# include <unistd.h> -# include <stdint.h> -# ifdef __CYGWIN__ -# include <io.h> -# define HAVE_SETENV -# ifdef __STRICT_ANSI__ -char *realpath (const char *, char *); -int putenv (char *); -int setenv (const char *, const char *, int); -# endif -# endif -#endif -#include <malloc.h> -#include <stdarg.h> -#include <assert.h> -#include <string.h> -#include <ctype.h> -#include <errno.h> -#include <fcntl.h> -#include <sys/stat.h> - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef S_IXOTH -# define S_IXOTH 0 -#endif -#ifndef S_IXGRP -# define S_IXGRP 0 -#endif - -#ifdef _MSC_VER -# define S_IXUSR _S_IEXEC -# define stat _stat -# ifndef _INTPTR_T_DEFINED -# define intptr_t int -# endif -#endif - -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -# define HAVE_DOS_BASED_FILE_SYSTEM -# define FOPEN_WB "wb" -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#ifdef __CYGWIN__ -# define FOPEN_WB "wb" -#endif - -#ifndef FOPEN_WB -# define FOPEN_WB "w" -#endif -#ifndef _O_BINARY -# define _O_BINARY 0 -#endif - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) - -#undef LTWRAPPER_DEBUGPRINTF -#if defined DEBUGWRAPPER -# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args -static void -ltwrapper_debugprintf (const char *fmt, ...) -{ - va_list args; - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); -} -#else -# define LTWRAPPER_DEBUGPRINTF(args) -#endif - -const char *program_name = NULL; - -void *xmalloc (size_t num); -char *xstrdup (const char *string); -const char *base_name (const char *name); -char *find_executable (const char *wrapper); -char *chase_symlinks (const char *pathspec); -int make_executable (const char *path); -int check_executable (const char *path); -char *strendzap (char *str, const char *pat); -void lt_fatal (const char *message, ...); -void lt_setenv (const char *name, const char *value); -char *lt_extend_str (const char *orig_value, const char *add, int to_end); -void lt_opt_process_env_set (const char *arg); -void lt_opt_process_env_prepend (const char *arg); -void lt_opt_process_env_append (const char *arg); -int lt_split_name_value (const char *arg, char** name, char** value); -void lt_update_exe_path (const char *name, const char *value); -void lt_update_lib_path (const char *name, const char *value); - -static const char *script_text_part1 = -EOF - - func_emit_wrapper_part1 yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ "/' -e 's/$/\\n"/' - echo ";" - cat <<EOF - -static const char *script_text_part2 = -EOF - func_emit_wrapper_part2 yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ "/' -e 's/$/\\n"/' - echo ";" - - cat <<EOF -const char * MAGIC_EXE = "$magic_exe"; -const char * LIB_PATH_VARNAME = "$shlibpath_var"; -EOF - - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - func_to_host_pathlist "$temp_rpath" - cat <<EOF -const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result"; -EOF - else - cat <<"EOF" -const char * LIB_PATH_VALUE = ""; -EOF - fi - - if test -n "$dllsearchpath"; then - func_to_host_pathlist "$dllsearchpath:" - cat <<EOF -const char * EXE_PATH_VARNAME = "PATH"; -const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result"; -EOF - else - cat <<"EOF" -const char * EXE_PATH_VARNAME = ""; -const char * EXE_PATH_VALUE = ""; -EOF - fi - - if test "$fast_install" = yes; then - cat <<EOF -const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */ -EOF - else - cat <<EOF -const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */ -EOF - fi - - - cat <<"EOF" - -#define LTWRAPPER_OPTION_PREFIX "--lt-" -#define LTWRAPPER_OPTION_PREFIX_LENGTH 5 - -static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH; -static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; - -static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; - -static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7; -static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set"; - /* argument is putenv-style "foo=bar", value of foo is set to bar */ - -static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11; -static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend"; - /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */ - -static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10; -static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append"; - /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */ - -int -main (int argc, char *argv[]) -{ - char **newargz; - int newargc; - char *tmp_pathspec; - char *actual_cwrapper_path; - char *actual_cwrapper_name; - char *target_name; - char *lt_argv_zero; - intptr_t rval = 127; - - int i; - - program_name = (char *) xstrdup (base_name (argv[0])); - LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); - LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); - - /* very simple arg parsing; don't want to rely on getopt */ - for (i = 1; i < argc; i++) - { - if (strcmp (argv[i], dumpscript_opt) == 0) - { -EOF - case "$host" in - *mingw* | *cygwin* ) - # make stdout use "unix" line endings - echo " setmode(1,_O_BINARY);" - ;; - esac - - cat <<"EOF" - printf ("%s", script_text_part1); - printf ("%s", script_text_part2); - return 0; - } - } - - newargz = XMALLOC (char *, argc + 1); - tmp_pathspec = find_executable (argv[0]); - if (tmp_pathspec == NULL) - lt_fatal ("Couldn't find %s", argv[0]); - LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", - tmp_pathspec)); - - actual_cwrapper_path = chase_symlinks (tmp_pathspec); - LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", - actual_cwrapper_path)); - XFREE (tmp_pathspec); - - actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path)); - strendzap (actual_cwrapper_path, actual_cwrapper_name); - - /* wrapper name transforms */ - strendzap (actual_cwrapper_name, ".exe"); - tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1); - XFREE (actual_cwrapper_name); - actual_cwrapper_name = tmp_pathspec; - tmp_pathspec = 0; - - /* target_name transforms -- use actual target program name; might have lt- prefix */ - target_name = xstrdup (base_name (TARGET_PROGRAM_NAME)); - strendzap (target_name, ".exe"); - tmp_pathspec = lt_extend_str (target_name, ".exe", 1); - XFREE (target_name); - target_name = tmp_pathspec; - tmp_pathspec = 0; - - LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n", - target_name)); -EOF - - cat <<EOF - newargz[0] = - XMALLOC (char, (strlen (actual_cwrapper_path) + - strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1)); - strcpy (newargz[0], actual_cwrapper_path); - strcat (newargz[0], "$objdir"); - strcat (newargz[0], "/"); -EOF - - cat <<"EOF" - /* stop here, and copy so we don't have to do this twice */ - tmp_pathspec = xstrdup (newargz[0]); - - /* do NOT want the lt- prefix here, so use actual_cwrapper_name */ - strcat (newargz[0], actual_cwrapper_name); - - /* DO want the lt- prefix here if it exists, so use target_name */ - lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1); - XFREE (tmp_pathspec); - tmp_pathspec = NULL; -EOF - - case $host_os in - mingw*) - cat <<"EOF" - { - char* p; - while ((p = strchr (newargz[0], '\\')) != NULL) - { - *p = '/'; - } - while ((p = strchr (lt_argv_zero, '\\')) != NULL) - { - *p = '/'; - } - } -EOF - ;; - esac - - cat <<"EOF" - XFREE (target_name); - XFREE (actual_cwrapper_path); - XFREE (actual_cwrapper_name); - - lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ - lt_setenv ("DUALCASE", "1"); /* for MSK sh */ - lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); - lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); - - newargc=0; - for (i = 1; i < argc; i++) - { - if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0) - { - if (argv[i][env_set_opt_len] == '=') - { - const char *p = argv[i] + env_set_opt_len + 1; - lt_opt_process_env_set (p); - } - else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc) - { - lt_opt_process_env_set (argv[++i]); /* don't copy */ - } - else - lt_fatal ("%s missing required argument", env_set_opt); - continue; - } - if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0) - { - if (argv[i][env_prepend_opt_len] == '=') - { - const char *p = argv[i] + env_prepend_opt_len + 1; - lt_opt_process_env_prepend (p); - } - else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc) - { - lt_opt_process_env_prepend (argv[++i]); /* don't copy */ - } - else - lt_fatal ("%s missing required argument", env_prepend_opt); - continue; - } - if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0) - { - if (argv[i][env_append_opt_len] == '=') - { - const char *p = argv[i] + env_append_opt_len + 1; - lt_opt_process_env_append (p); - } - else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc) - { - lt_opt_process_env_append (argv[++i]); /* don't copy */ - } - else - lt_fatal ("%s missing required argument", env_append_opt); - continue; - } - if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0) - { - /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX - namespace, but it is not one of the ones we know about and - have already dealt with, above (inluding dump-script), then - report an error. Otherwise, targets might begin to believe - they are allowed to use options in the LTWRAPPER_OPTION_PREFIX - namespace. The first time any user complains about this, we'll - need to make LTWRAPPER_OPTION_PREFIX a configure-time option - or a configure.ac-settable value. - */ - lt_fatal ("Unrecognized option in %s namespace: '%s'", - ltwrapper_option_prefix, argv[i]); - } - /* otherwise ... */ - newargz[++newargc] = xstrdup (argv[i]); - } - newargz[++newargc] = NULL; - - LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>"))); - for (i = 0; i < newargc; i++) - { - LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>"))); - } - -EOF - - case $host_os in - mingw*) - cat <<"EOF" - /* execv doesn't actually work on mingw as expected on unix */ - rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); - if (rval == -1) - { - /* failed to start process */ - LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); - return 127; - } - return rval; -EOF - ;; - *) - cat <<"EOF" - execv (lt_argv_zero, newargz); - return rval; /* =127, but avoids unused variable warning */ -EOF - ;; - esac - - cat <<"EOF" -} - -void * -xmalloc (size_t num) -{ - void *p = (void *) malloc (num); - if (!p) - lt_fatal ("Memory exhausted"); - - return p; -} - -char * -xstrdup (const char *string) -{ - return string ? strcpy ((char *) xmalloc (strlen (string) + 1), - string) : NULL; -} - -const char * -base_name (const char *name) -{ - const char *base; - -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha ((unsigned char) name[0]) && name[1] == ':') - name += 2; -#endif - - for (base = name; *name; name++) - if (IS_DIR_SEPARATOR (*name)) - base = name + 1; - return base; -} - -int -check_executable (const char *path) -{ - struct stat st; - - LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", - path ? (*path ? path : "EMPTY!") : "NULL!")); - if ((!path) || (!*path)) - return 0; - - if ((stat (path, &st) >= 0) - && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) - return 1; - else - return 0; -} - -int -make_executable (const char *path) -{ - int rval = 0; - struct stat st; - - LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", - path ? (*path ? path : "EMPTY!") : "NULL!")); - if ((!path) || (!*path)) - return 0; - - if (stat (path, &st) >= 0) - { - rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); - } - return rval; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise - Does not chase symlinks, even on platforms that support them. -*/ -char * -find_executable (const char *wrapper) -{ - int has_slash = 0; - const char *p; - const char *p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - int tmp_len; - char *concat_name; - - LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", - wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char *path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char *q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR (*q)) - break; - p_len = q - p; - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen (tmp); - concat_name = - XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = - XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen (tmp); - concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - return NULL; -} - -char * -chase_symlinks (const char *pathspec) -{ -#ifndef S_ISLNK - return xstrdup (pathspec); -#else - char buf[LT_PATHMAX]; - struct stat s; - char *tmp_pathspec = xstrdup (pathspec); - char *p; - int has_symlinks = 0; - while (strlen (tmp_pathspec) && !has_symlinks) - { - LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", - tmp_pathspec)); - if (lstat (tmp_pathspec, &s) == 0) - { - if (S_ISLNK (s.st_mode) != 0) - { - has_symlinks = 1; - break; - } - - /* search backwards for last DIR_SEPARATOR */ - p = tmp_pathspec + strlen (tmp_pathspec) - 1; - while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - p--; - if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - { - /* no more DIR_SEPARATORS left */ - break; - } - *p = '\0'; - } - else - { - char *errstr = strerror (errno); - lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); - } - } - XFREE (tmp_pathspec); - - if (!has_symlinks) - { - return xstrdup (pathspec); - } - - tmp_pathspec = realpath (pathspec, buf); - if (tmp_pathspec == 0) - { - lt_fatal ("Could not follow symlinks for %s", pathspec); - } - return xstrdup (tmp_pathspec); -#endif -} - -char * -strendzap (char *str, const char *pat) -{ - size_t len, patlen; - - assert (str != NULL); - assert (pat != NULL); - - len = strlen (str); - patlen = strlen (pat); - - if (patlen <= len) - { - str += len - patlen; - if (strcmp (str, pat) == 0) - *str = '\0'; - } - return str; -} - -static void -lt_error_core (int exit_status, const char *mode, - const char *message, va_list ap) -{ - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); -} - -void -lt_setenv (const char *name, const char *value) -{ - LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", - (name ? name : "<NULL>"), - (value ? value : "<NULL>"))); - { -#ifdef HAVE_SETENV - /* always make a copy, for consistency with !HAVE_SETENV */ - char *str = xstrdup (value); - setenv (name, str, 1); -#else - int len = strlen (name) + 1 + strlen (value) + 1; - char *str = XMALLOC (char, len); - sprintf (str, "%s=%s", name, value); - if (putenv (str) != EXIT_SUCCESS) - { - XFREE (str); - } -#endif - } -} - -char * -lt_extend_str (const char *orig_value, const char *add, int to_end) -{ - char *new_value; - if (orig_value && *orig_value) - { - int orig_value_len = strlen (orig_value); - int add_len = strlen (add); - new_value = XMALLOC (char, add_len + orig_value_len + 1); - if (to_end) - { - strcpy (new_value, orig_value); - strcpy (new_value + orig_value_len, add); - } - else - { - strcpy (new_value, add); - strcpy (new_value + add_len, orig_value); - } - } - else - { - new_value = xstrdup (add); - } - return new_value; -} - -int -lt_split_name_value (const char *arg, char** name, char** value) -{ - const char *p; - int len; - if (!arg || !*arg) - return 1; - - p = strchr (arg, (int)'='); - - if (!p) - return 1; - - *value = xstrdup (++p); - - len = strlen (arg) - strlen (*value); - *name = XMALLOC (char, len); - strncpy (*name, arg, len-1); - (*name)[len - 1] = '\0'; - - return 0; -} - -void -lt_opt_process_env_set (const char *arg) -{ - char *name = NULL; - char *value = NULL; - - if (lt_split_name_value (arg, &name, &value) != 0) - { - XFREE (name); - XFREE (value); - lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); - } - - lt_setenv (name, value); - XFREE (name); - XFREE (value); -} - -void -lt_opt_process_env_prepend (const char *arg) -{ - char *name = NULL; - char *value = NULL; - char *new_value = NULL; - - if (lt_split_name_value (arg, &name, &value) != 0) - { - XFREE (name); - XFREE (value); - lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); - } - - new_value = lt_extend_str (getenv (name), value, 0); - lt_setenv (name, new_value); - XFREE (new_value); - XFREE (name); - XFREE (value); -} - -void -lt_opt_process_env_append (const char *arg) -{ - char *name = NULL; - char *value = NULL; - char *new_value = NULL; - - if (lt_split_name_value (arg, &name, &value) != 0) - { - XFREE (name); - XFREE (value); - lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); - } - - new_value = lt_extend_str (getenv (name), value, 1); - lt_setenv (name, new_value); - XFREE (new_value); - XFREE (name); - XFREE (value); -} - -void -lt_update_exe_path (const char *name, const char *value) -{ - LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", - (name ? name : "<NULL>"), - (value ? value : "<NULL>"))); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - /* some systems can't cope with a ':'-terminated path #' */ - int len = strlen (new_value); - while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) - { - new_value[len-1] = '\0'; - } - lt_setenv (name, new_value); - XFREE (new_value); - } -} - -void -lt_update_lib_path (const char *name, const char *value) -{ - LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", - (name ? name : "<NULL>"), - (value ? value : "<NULL>"))); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - lt_setenv (name, new_value); - XFREE (new_value); - } -} - - -EOF -} -# end: func_emit_cwrapperexe_src - -# func_mode_link arg... -func_mode_link () -{ - $opt_debug + # libtool link mode + link | relink) + modename="$modename: link" case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra @@ -4051,10 +1121,10 @@ func_mode_link () allow_undefined=yes ;; esac - libtool_args=$nonopt + libtool_args="$nonopt" base_compile="$nonopt $@" - compile_command=$nonopt - finalize_command=$nonopt + compile_command="$nonopt" + finalize_command="$nonopt" compile_rpath= finalize_rpath= @@ -4069,7 +1139,6 @@ func_mode_link () dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= - new_inherited_linker_flags= avoid_version=no dlfiles= @@ -4085,6 +1154,7 @@ func_mode_link () no_install=no objs= non_pic_objects= + notinst_path= # paths that contain not-installed libtool libraries precious_files_regex= prefer_static_libs=no preload=no @@ -4098,25 +1168,19 @@ func_mode_link () thread_safe=no vinfo= vinfo_number=no - weak_libs= single_module="${wl}-single_module" + func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in - -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" - build_old_libs=no - break - ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - func_warning "complete static linking is impossible in this configuration" + $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static @@ -4150,16 +1214,20 @@ func_mode_link () while test "$#" -gt 0; do arg="$1" shift - func_quote_for_eval "$arg" - qarg=$func_quote_for_eval_unquoted_result - func_append libtool_args " $func_quote_for_eval_result" + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) - func_append compile_command " @OUTPUT@" - func_append finalize_command " @OUTPUT@" + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" ;; esac @@ -4167,8 +1235,8 @@ func_mode_link () dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. - func_append compile_command " @SYMFILE@" - func_append finalize_command " @SYMFILE@" + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" preload=yes fi case $arg in @@ -4206,8 +1274,10 @@ func_mode_link () ;; expsyms) export_symbols="$arg" - test -f "$arg" \ - || func_fatal_error "symbol file \`$arg' does not exist" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit $EXIT_FAILURE + fi prev= continue ;; @@ -4216,21 +1286,18 @@ func_mode_link () prev= continue ;; - framework) - case $host in - *-*-darwin*) - case "$deplibs " in - *" $qarg.ltframework "*) ;; - *) deplibs="$deplibs $qarg.ltframework" # this is fixed later - ;; - esac - ;; - esac + inst_prefix) + inst_prefix_dir="$arg" prev= continue ;; - inst_prefix) - inst_prefix_dir="$arg" + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" prev= continue ;; @@ -4238,30 +1305,39 @@ func_mode_link () if test -f "$arg"; then save_arg=$arg moreargs= - for fil in `cat "$save_arg"` + for fil in `cat $save_arg` do # moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= # Read the .lo file - func_source "$arg" + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac - if test -z "$pic_object" || + if test -z "$pic_object" || \ test -z "$non_pic_object" || - test "$pic_object" = none && + test "$pic_object" = none && \ test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE fi # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. @@ -4286,7 +1362,7 @@ func_mode_link () fi # A PIC object. - func_append libobjs " $pic_object" + libobjs="$libobjs $pic_object" arg="$pic_object" fi @@ -4296,7 +1372,7 @@ func_mode_link () non_pic_object="$xdir$non_pic_object" # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi @@ -4304,48 +1380,46 @@ func_mode_link () # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" - func_append non_pic_objects " $non_pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" fi else # Only an error if not doing a dry-run. - if $opt_dry_run; then + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "\`$arg' is not a valid libtool object" + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" fi fi done else - func_fatal_error "link input file \`$arg' does not exist" + $echo "$modename: link input file \`$save_arg' does not exist" + exit $EXIT_FAILURE fi arg=$save_arg prev= continue ;; - precious_regex) - precious_files_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) - func_fatal_error "only absolute run-paths are allowed" + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE ;; esac if test "$prev" = rpath; then @@ -4362,37 +1436,39 @@ func_mode_link () prev= continue ;; - shrext) - shrext_cmds="$arg" + xcompiler) + compiler_flags="$compiler_flags $qarg" prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" continue ;; - weak) - weak_libs="$weak_libs $arg" + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" continue ;; xcclinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $qarg" prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" continue ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" + shrext) + shrext_cmds="$arg" prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" continue ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" + darwin_framework|darwin_framework_skip) + test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" prev= - func_append compile_command " $wl$qarg" - func_append finalize_command " $wl$qarg" continue ;; *) @@ -4408,16 +1484,16 @@ func_mode_link () case $arg in -all-static) if test -n "$link_static_flag"; then - # See comment for -static flag below, for more details. - func_append compile_command " $link_static_flag" - func_append finalize_command " $link_static_flag" + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. - func_fatal_error "\`-allow-undefined' must not be used because it is the default" + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue ;; -avoid-version) @@ -4442,7 +1518,8 @@ func_mode_link () -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - func_fatal_error "more than one -exported-symbols argument is not allowed" + $echo "$modename: more than one -exported-symbols argument is not allowed" + exit $EXIT_FAILURE fi if test "X$arg" = "X-export-symbols"; then prev=expsyms @@ -4452,8 +1529,15 @@ func_mode_link () continue ;; - -framework) - prev=framework + -framework|-arch|-isysroot) + case " $CC " in + *" ${arg} ${1} "* | *" ${arg} ${1} "*) + prev=darwin_framework_skip ;; + *) compiler_flags="$compiler_flags $arg" + prev=darwin_framework ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" continue ;; @@ -4467,30 +1551,25 @@ func_mode_link () -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) - func_append compile_command " $arg" - func_append finalize_command " $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" ;; esac continue ;; -L*) - func_stripname '-L' '' "$arg" - dir=$func_stripname_result - if test -z "$dir"; then - if test "$#" -gt 0; then - func_fatal_error "require no space between \`-L' and \`$1'" - else - func_fatal_error "need path for \`-L' option" - fi - fi + dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` - test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of \`$dir'" + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + notinst_path="$notinst_path $dir" + fi dir="$absdir" ;; esac @@ -4502,16 +1581,14 @@ func_mode_link () ;; esac case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; - ::) dllsearchpath=$dir;; *) dllsearchpath="$dllsearchpath:$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; @@ -4522,7 +1599,7 @@ func_mode_link () -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) # These systems don't actually have a C or math library (as such) continue ;; @@ -4536,7 +1613,7 @@ func_mode_link () ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs System.ltframework" + deplibs="$deplibs -framework System" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) @@ -4560,30 +1637,20 @@ func_mode_link () continue ;; - -module) - module=yes - continue - ;; - # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. - # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot) + -model) + compile_command="$compile_command $arg" compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" + finalize_command="$finalize_command $arg" prev=xcompiler continue ;; - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case "$new_inherited_linker_flags " in - *" $arg "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; - esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" continue ;; @@ -4592,6 +1659,44 @@ func_mode_link () continue ;; + -module) + module=yes + continue + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m* pass through architecture-specific compiler args for GCC + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC + # -F/path gives path to uninstalled frameworks, gcc on darwin + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) + + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + + -shrext) + prev=shrext + continue + ;; + -no-fast-install) fast_install=no continue @@ -4599,11 +1704,11 @@ func_mode_link () -no-install) case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. - func_warning "\`-no-install' is ignored for $host" - func_warning "assuming \`-no-fast-install' instead" + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 fast_install=no ;; *) no_install=yes ;; @@ -4644,13 +1749,13 @@ func_mode_link () ;; -R*) - func_stripname '-R' '' "$arg" - dir=$func_stripname_result + dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) - func_fatal_error "only absolute run-paths are allowed" + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE ;; esac case "$xrpath " in @@ -4660,16 +1765,6 @@ func_mode_link () continue ;; - -shared) - # The effects of -shared are defined in a previous loop. - continue - ;; - - -shrext) - prev=shrext - continue - ;; - -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that @@ -4688,49 +1783,47 @@ func_mode_link () prev=vinfo continue ;; - -version-number) prev=vinfo vinfo_number=yes continue ;; - -weak) - prev=weak - continue - ;; - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" - func_quote_for_eval "$flag" - arg="$arg $wl$func_quote_for_eval_result" - compiler_flags="$compiler_flags $func_quote_for_eval_result" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" done IFS="$save_ifs" - func_stripname ' ' '' "$arg" - arg=$func_stripname_result + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Wl,*) - func_stripname '-Wl,' '' "$arg" - args=$func_stripname_result + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" - func_quote_for_eval "$flag" - arg="$arg $wl$func_quote_for_eval_result" - compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" - linker_flags="$linker_flags $func_quote_for_eval_result" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" done IFS="$save_ifs" - func_stripname ' ' '' "$arg" - arg=$func_stripname_result + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Xcompiler) @@ -4748,36 +1841,16 @@ func_mode_link () continue ;; - # -msg_* for osf cc - -msg_*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - - # -64, -mips[0-9] enable 64-bit mode on the SGI compiler - # -r[0-9][0-9]* specifies the processor on the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler - # +DA*, +DD* enable 64-bit mode on the HP compiler - # -q* pass through compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* pass through architecture-specific - # compiler args for GCC - # -F/path gives path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC - # @file GCC response files - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - func_append compile_command " $arg" - func_append finalize_command " $arg" - compiler_flags="$compiler_flags $arg" - continue - ;; - # Some other compiler flag. -* | +*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac ;; *.$objext) @@ -4789,23 +1862,32 @@ func_mode_link () # A libtool-controlled object. # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= # Read the .lo file - func_source "$arg" + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac - if test -z "$pic_object" || + if test -z "$pic_object" || \ test -z "$non_pic_object" || - test "$pic_object" = none && + test "$pic_object" = none && \ test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE fi # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. @@ -4830,7 +1912,7 @@ func_mode_link () fi # A PIC object. - func_append libobjs " $pic_object" + libobjs="$libobjs $pic_object" arg="$pic_object" fi @@ -4840,7 +1922,7 @@ func_mode_link () non_pic_object="$xdir$non_pic_object" # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi @@ -4848,22 +1930,28 @@ func_mode_link () # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" - func_append non_pic_objects " $non_pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" fi else # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE else - func_fatal_error "\`$arg' is not a valid libtool object" + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" fi fi ;; @@ -4896,51 +1984,70 @@ func_mode_link () *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then - func_append compile_command " $arg" - func_append finalize_command " $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" fi done # argument parsing loop - test -n "$prev" && \ - func_fatal_help "the \`$prevarg' option requires an argument" + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" - func_append compile_command " $arg" - func_append finalize_command " $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" fi oldlibs= # calculate the name of the file, without its directory - func_basename "$output" - outputname="$func_basename_result" + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - func_dirname "$output" "/" "" - output_objdir="$func_dirname_result$objdir" + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi # Create the object directory. - func_mkdir_p "$output_objdir" + if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then + exit $exit_status + fi + fi # Determine the type of output case $output in "") - func_fatal_help "you must specify an output file" + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; @@ -4948,13 +2055,22 @@ func_mode_link () *) linkmode=prog ;; # Anything else should be a program. esac + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplications in $postdeps and $predeps + duplicate_compiler_generated_deps=yes + ;; + *) + duplicate_compiler_generated_deps=$duplicate_deps + ;; + esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if $opt_duplicate_deps ; then + if test "X$duplicate_deps" = "Xyes" ; then case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac @@ -4969,7 +2085,7 @@ func_mode_link () # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= - if $opt_duplicate_compiler_generated_deps; then + if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; @@ -4985,16 +2101,15 @@ func_mode_link () newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - case $linkmode in lib) - passes="conv dlpreopen link" + passes="conv link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) - func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit $EXIT_FAILURE ;; esac done @@ -5010,20 +2125,7 @@ func_mode_link () *) passes="conv" ;; esac - for pass in $passes; do - # The preopen pass in lib mode reverses $deplibs; put it back here - # so that -L comes before libs that need it for instance... - if test "$linkmode,$pass" = "lib,link"; then - ## FIXME: Find the place where the list is rebuilt in the wrong - ## order, and fix it there properly - tmp_deplibs= - for deplib in $deplibs; do - tmp_deplibs="$deplib $tmp_deplibs" - done - deplibs="$tmp_deplibs" - fi - if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" @@ -5033,39 +2135,14 @@ func_mode_link () case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; - link) - libs="$deplibs %DEPLIBS%" - test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" - ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi - if test "$linkmode,$pass" = "lib,dlpreopen"; then - # Collect and forward deplibs of preopened libtool libs - for lib in $dlprefiles; do - # Ignore non-libtool-libs - dependency_libs= - case $lib in - *.la) func_source "$lib" ;; - esac - - # Collect preopened libtool deplibs, except any this library - # has declared as weak libs - for deplib in $dependency_libs; do - deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` - case " $weak_libs " in - *" $deplib_base "*) ;; - *) deplibs="$deplibs $deplib" ;; - esac - done - done - libs="$dlprefiles" - fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi - for deplib in $libs; do lib= found=no @@ -5076,22 +2153,15 @@ func_mode_link () finalize_deplibs="$deplib $finalize_deplibs" else compiler_flags="$compiler_flags $deplib" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; - esac - fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then - func_warning "\`-l' is ignored for archives/objects" + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 continue fi - func_stripname '-l' '' "$deplib" - name=$func_stripname_result + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else @@ -5127,17 +2197,21 @@ func_mode_link () if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) - if func_lalib_p "$lib"; then + if (${SED} -e '2q' $lib | + grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then library_names= old_library= - func_source "$lib" + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no - func_dirname "$lib" "" "." - ladir="$func_dirname_result" + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" @@ -5149,35 +2223,19 @@ func_mode_link () continue fi fi - ;; + ;; *) ;; esac fi fi ;; # -l - *.ltframework) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; - esac - fi - fi - continue - ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" - func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; prog) if test "$pass" = conv; then @@ -5190,19 +2248,17 @@ func_mode_link () compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi - func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; *) - func_warning "\`-L' is ignored for archives/objects" + $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then - func_stripname '-R' '' "$deplib" - dir=$func_stripname_result + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; @@ -5220,41 +2276,35 @@ func_mode_link () fi case $linkmode in lib) - # Linking convenience modules into shared libraries is allowed, - # but linking other static libraries is non-portable. - case " $dlpreconveniencelibs " in - *" $deplib "*) ;; - *) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + if eval $echo \"$deplib\" 2>/dev/null \ + | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi - ;; - pass_all) valid_a_lib=yes + fi ;; - esac - if test "$valid_a_lib" != yes; then - $ECHO - $ECHO "*** Warning: Trying to link with static lib archive $deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because the file extensions .$libext of this argument makes me believe" - $ECHO "*** that it is just a static archive that I should not use here." - else - $ECHO - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - ;; - esac + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because the file extensions .$libext of this argument makes me believe" + $echo "*** that it is just a static archive that I should not used here." + else + $echo + $echo "*** Warning: Linking the shared library $output against the" + $echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi continue ;; prog) @@ -5289,18 +2339,21 @@ func_mode_link () continue ;; esac # case $deplib - if test "$found" = yes || test -f "$lib"; then : else - func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 + exit $EXIT_FAILURE fi # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$lib" \ - || func_fatal_error "\`$lib' is not a valid libtool archive" + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi - func_dirname "$lib" "" "." - ladir="$func_dirname_result" + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." dlname= dlopen= @@ -5308,7 +2361,6 @@ func_mode_link () libdir= library_names= old_library= - inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes @@ -5317,19 +2369,11 @@ func_mode_link () # Read the .la file - func_source "$lib" - - # Convert "-framework foo" to "foo.ltframework" - if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` - for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do - case " $new_inherited_linker_flags " in - *" $tmp_inherited_linker_flag "*) ;; - *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; - esac - done - fi - dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then @@ -5342,24 +2386,26 @@ func_mode_link () deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for \`$lib'" + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done elif test "$linkmode" != prog && test "$linkmode" != lib; then - func_fatal_error "\`$lib' is not a convenience library" + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit $EXIT_FAILURE fi - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done continue fi # $pass = conv @@ -5370,13 +2416,15 @@ func_mode_link () linklib="$l" done if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for \`$lib'" + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then - func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE fi if test -z "$dlname" || test "$dlopen_support" != yes || @@ -5398,19 +2446,18 @@ func_mode_link () *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of \`$ladir'" - func_warning "passing it literally to the linker, although it might fail" + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 abs_ladir="$ladir" fi ;; esac - func_basename "$lib" - laname="$func_basename_result" + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library \`$lib' was moved." + $echo "$modename: warning: library \`$lib' was moved." 1>&2 dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" @@ -5432,22 +2479,18 @@ func_mode_link () notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes - func_stripname 'lib' '.la' "$laname" - name=$func_stripname_result + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then - if test -z "$libdir" && test "$linkmode" = prog; then - func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" @@ -5483,9 +2526,7 @@ func_mode_link () tmp_libs= for deplib in $dependency_libs; do case $deplib in - -L*) func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" - ;; + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then @@ -5495,7 +2536,7 @@ func_mode_link () # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if $opt_duplicate_deps ; then + if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac @@ -5508,14 +2549,15 @@ func_mode_link () if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || + test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. - case "$temp_rpath:" in - *"$absdir:"*) ;; - *) temp_rpath="$temp_rpath$absdir:" ;; + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $absdir" ;; esac fi @@ -5553,43 +2595,27 @@ func_mode_link () link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes; then + if test "$use_static_libs" = built && test "$installed" = yes ; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then - case $host in - *cygwin* | *mingw* | *cegcc*) - # No point in relinking DLLs because paths are not encoded - notinst_deplibs="$notinst_deplibs $lib" - need_relink=no - ;; - *) - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi - ;; - esac + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi # This is a shared library - # Warn about portability, can't link against -module's on some - # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule="" - for dlpremoduletest in $dlprefiles; do - if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule="$dlpremoduletest" - break - fi - done - if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then - $ECHO + # Warn about portability, can't link against -module's on + # some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then + $echo if test "$linkmode" = prog; then - $ECHO "*** Warning: Linking the executable $output against the loadable module" + $echo "*** Warning: Linking the executable $output against the loadable module" else - $ECHO "*** Warning: Linking the shared library $output against the loadable module" + $echo "*** Warning: Linking the shared library $output against the loadable module" fi - $ECHO "*** $linklib is not portable!" + $echo "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then @@ -5619,19 +2645,17 @@ func_mode_link () if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names - shift - realname="$1" - shift - libname=`eval "\\$ECHO \"$libname_spec\""` + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in - *cygwin* | mingw* | *cegcc*) - func_arith $current - $age - major=$func_arith_result + *cygwin* | mingw*) + major=`expr $current - $age` versuffix="-$major" ;; esac @@ -5642,22 +2666,36 @@ func_mode_link () # Make a new name for the extract_expsyms_cmds to use soroot="$soname" - func_basename "$soroot" - soname="$func_basename_result" - func_stripname 'lib' '.dll' "$soname" - newlib=libimp-$func_stripname_result.a + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else - func_verbose "extracting exported symbol list from \`$soname'" - func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$extract_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for \`$soname'" - func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$old_archive_from_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" fi # make sure the library variables are pointing to the new library dir=$output_objdir @@ -5679,21 +2717,17 @@ func_mode_link () *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) - # if the lib is a (non-dlopened) module then we can not - # link against it, someone is ignoring the earlier warnings + # if the lib is a module then we can not link against + # it, someone is ignoring the new warnings I added if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null ; then - if test "X$dlopenmodule" != "X$lib"; then - $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - $ECHO - $ECHO "*** And there doesn't seem to be a static archive available" - $ECHO "*** The link will probably fail, sorry" - else - add="$dir/$old_library" - fi - elif test -n "$old_library"; then - add="$dir/$old_library" + $EGREP ": [^:]* bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo + $echo "** And there doesn't seem to be a static archive available" + $echo "** The link will probably fail, sorry" + else + add="$dir/$old_library" fi fi esac @@ -5711,8 +2745,7 @@ func_mode_link () fi ;; relink) - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then + if test "$hardcode_direct" = yes; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" @@ -5736,7 +2769,8 @@ func_mode_link () esac if test "$lib_linked" != yes; then - func_fatal_configuration "unsupported hardcode properties" + $echo "$modename: configuration error: unsupported hardcode properties" + exit $EXIT_FAILURE fi if test -n "$add_shlibpath"; then @@ -5751,8 +2785,8 @@ func_mode_link () else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && - test "$hardcode_minus_L" != yes && + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; @@ -5767,8 +2801,7 @@ func_mode_link () add_dir= add= # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then + if test "$hardcode_direct" = yes; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" @@ -5782,9 +2815,9 @@ func_mode_link () elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" + add="$inst_prefix_dir$libdir/$linklib" else - add="$libdir/$linklib" + add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. @@ -5828,21 +2861,21 @@ func_mode_link () # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - $ECHO - $ECHO "*** Warning: This system can not link to static lib archive $lib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have." + $echo + $echo "*** Warning: This system can not link to static lib archive $lib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - $ECHO "*** But as you try to build a module library, libtool will still create " - $ECHO "*** a static module, that should work as long as the dlopening application" - $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." + $echo "*** But as you try to build a module library, libtool will still create " + $echo "*** a static module, that should work as long as the dlopening application" + $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - $ECHO - $ECHO "*** However, this would only work if libtool was able to extract symbol" - $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" - $ECHO "*** not find such a program. So, this module is probably useless." - $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module @@ -5866,8 +2899,7 @@ func_mode_link () temp_deplibs= for libdir in $dependency_libs; do case $libdir in - -R*) func_stripname '-R' '' "$libdir" - temp_xrpath=$func_stripname_result + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; @@ -5885,7 +2917,7 @@ func_mode_link () tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - if $opt_duplicate_deps ; then + if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac @@ -5899,71 +2931,94 @@ func_mode_link () case $deplib in -L*) path="$deplib" ;; *.la) - func_dirname "$deplib" "" "." - dir="$func_dirname_result" + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of \`$dir'" + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 absdir="$dir" fi ;; esac - if $GREP "^installed=no" $deplib > /dev/null; then + if grep "^installed=no" $deplib > /dev/null; then + path="$absdir/$objdir" + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="$absdir" + fi + depdepl= case $host in *-*-darwin*) - depdepl= + # we do not want to link against static libs, + # but need to link against shared eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done - if test -f "$absdir/$objdir/$depdepl" ; then - depdepl="$absdir/$objdir/$depdepl" - darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - if test -z "$darwin_install_name"; then - darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - fi - compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" - path= + if test -f "$deplibdir/$depdepl" ; then + depdepl="$deplibdir/$depdepl" + elif test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" + else + # Can't find it, oh well... + depdepl= fi + # do not add paths which are already there + case " $newlib_search_path " in + *" $path "*) ;; + *) newlib_search_path="$newlib_search_path $path";; + esac fi + path="" ;; *) - path="-L$absdir/$objdir" + path="-L$path" ;; esac - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" - test "$absdir" != "$libdir" && \ - func_warning "\`$deplib' seems to be moved" - - path="-L$absdir" - fi ;; + -l*) + case $host in + *-*-darwin*) + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" + ;; + *) continue ;; + esac + ;; + *) continue ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac + case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$depdepl $deplibs" ;; + esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs - if test "$pass" = link; then - if test "$linkmode" = "prog"; then - compile_deplibs="$new_inherited_linker_flags $compile_deplibs" - finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" - else - compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - fi - fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries @@ -6062,36 +3117,39 @@ func_mode_link () done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" - fi - if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for archives" - fi - case " $deplibs" in *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for archives" ;; + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;; esac - test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for archives" + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi - test -n "$xrpath" && \ - func_warning "\`-R' is ignored for archives" + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi - test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for archives" + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi - test -n "$release" && \ - func_warning "\`-release' is ignored for archives" + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi - test -n "$export_symbols$export_symbols_regex" && \ - func_warning "\`-export-symbols' is ignored for archives" + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi # Now set the variables for building old libraries. build_libtool_libs=no @@ -6103,48 +3161,48 @@ func_mode_link () # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) - func_stripname 'lib' '.la' "$outputname" - name=$func_stripname_result + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) - test "$module" = no && \ - func_fatal_help "libtool library \`$output' must begin with \`lib'" - + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required - func_stripname '' '.la' "$outputname" - name=$func_stripname_result + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else - func_stripname '' '.la' "$outputname" - libname=$func_stripname_result + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then - func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit $EXIT_FAILURE else - $ECHO - $ECHO "*** Warning: Linking the shared library $output against the non-libtool" - $ECHO "*** objects $objs is not portable!" + $echo + $echo "*** Warning: Linking the shared library $output against the non-libtool" + $echo "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi - test "$dlself" != no && \ - func_warning "\`-dlopen self' is ignored for libtool libraries" + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 + fi set dummy $rpath - shift - test "$#" -gt 1 && \ - func_warning "ignoring multiple \`-rpath's for a libtool library" - - install_libdir="$1" + if test "$#" -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" oldlibs= if test -z "$rpath"; then @@ -6158,21 +3216,25 @@ func_mode_link () build_old_libs=yes fi - test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 + fi - test -n "$release" && \ - func_warning "\`-release' is ignored for convenience libraries" + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 - shift IFS="$save_ifs" - test -n "$7" && \ - func_fatal_help "too many parameters to \`-version-info'" + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts @@ -6180,9 +3242,9 @@ func_mode_link () case $vinfo_number in yes) - number_major="$1" - number_minor="$2" - number_revision="$3" + number_major="$2" + number_minor="$3" + number_revision="$4" # # There are really only two kinds -- those that # use the current revision as the major version @@ -6192,8 +3254,7 @@ func_mode_link () # case $version_type in darwin|linux|osf|windows|none) - func_arith $number_major + $number_minor - current=$func_arith_result + current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_revision" ;; @@ -6203,21 +3264,17 @@ func_mode_link () age="0" ;; irix|nonstopux) - func_arith $number_major + $number_minor - current=$func_arith_result + current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; - *) - func_fatal_configuration "$modename: unknown library version type \`$version_type'" - ;; esac ;; no) - current="$1" - revision="$2" - age="$3" + current="$2" + revision="$3" + age="$4" ;; esac @@ -6225,30 +3282,34 @@ func_mode_link () case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "CURRENT \`$current' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "REVISION \`$revision' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - func_error "AGE \`$age' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" + $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE ;; esac if test "$age" -gt "$current"; then - func_error "AGE \`$age' is greater than the current interface number \`$current'" - func_fatal_error "\`$vinfo' is not valid version information" + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE fi # Calculate the version variables. @@ -6261,12 +3322,10 @@ func_mode_link () darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header - func_arith $current - $age - major=.$func_arith_result + major=.`expr $current - $age` versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... - func_arith $current + 1 - minor_current=$func_arith_result + minor_current=`expr $current + 1` xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; @@ -6278,17 +3337,15 @@ func_mode_link () freebsd-elf) major=".$current" - versuffix=".$current" + versuffix=".$current"; ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then - func_arith $current - $age + major=`expr $current - $age` else - func_arith $current - $age + 1 + major=`expr $current - $age + 1` fi - major=$func_arith_result - case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; @@ -6298,10 +3355,8 @@ func_mode_link () # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do - func_arith $revision - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result + iface=`expr $revision - $loop` + loop=`expr $loop - 1` verstring="$verstring_prefix$major.$iface:$verstring" done @@ -6311,24 +3366,20 @@ func_mode_link () ;; linux) - func_arith $current - $age - major=.$func_arith_result + major=.`expr $current - $age` versuffix="$major.$age.$revision" ;; osf) - func_arith $current - $age - major=.$func_arith_result + major=.`expr $current - $age` versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do - func_arith $current - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result + iface=`expr $current - $loop` + loop=`expr $loop - 1` verstring="$verstring:${iface}.0" done @@ -6336,11 +3387,6 @@ func_mode_link () verstring="$verstring:${current}.0" ;; - qnx) - major=".$current" - versuffix=".$current" - ;; - sunos) major=".$current" versuffix=".$current.$revision" @@ -6349,13 +3395,14 @@ func_mode_link () windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. - func_arith $current - $age - major=$func_arith_result + major=`expr $current - $age` versuffix="-$major" ;; *) - func_fatal_configuration "unknown library version type \`$version_type'" + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE ;; esac @@ -6389,7 +3436,7 @@ func_mode_link () # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then - func_warning "undefined symbols not allowed in $host shared libraries" + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 build_libtool_libs=no build_old_libs=yes fi @@ -6397,26 +3444,21 @@ func_mode_link () # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi - fi - func_generate_dlsyms "$libname" "$libname" "yes" - libobjs="$libobjs $symfileobj" - test "X$libobjs" = "X " && libobjs= - if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= - tempremovelist=`$ECHO "$output_objdir/*"` + tempremovelist=`$echo "$output_objdir/*"` for p in $tempremovelist; do case $p in - *.$objext | *.gcno) + *.$objext) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then - if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then + if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then continue fi fi @@ -6425,8 +3467,10 @@ func_mode_link () *) ;; esac done - test -n "$removelist" && \ - func_show_eval "${RM}r \$removelist" + if test -n "$removelist"; then + $show "${rm}r $removelist" + $run ${rm}r $removelist + fi fi # Now set the variables for building old libraries. @@ -6434,14 +3478,14 @@ func_mode_link () oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do - # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` - # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` - # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` + # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` + # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` + # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` #done if test -n "$xrpath"; then @@ -6482,12 +3526,12 @@ func_mode_link () if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework - deplibs="$deplibs System.ltframework" + deplibs="$deplibs -framework System" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. @@ -6501,7 +3545,7 @@ func_mode_link () *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; - *) + *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" @@ -6538,18 +3582,17 @@ func_mode_link () # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. - $opt_dry_run || $RM conftest.c + $rm conftest.c cat > conftest.c <<EOF int main() { return 0; } EOF - $opt_dry_run || $RM conftest + $rm conftest if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then ldd_output=`ldd conftest` for i in $deplibs; do - case $i in - -l*) - func_stripname -l '' "$i" - name=$func_stripname_result + name=`expr $i : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) @@ -6557,40 +3600,37 @@ EOF i="" ;; esac - fi + fi if test -n "$i" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` - set dummy $deplib_matches; shift - deplib_match=$1 + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then newdeplibs="$newdeplibs $i" else droppeddeps=yes - $ECHO - $ECHO "*** Warning: dynamic linker does not accept needed library $i." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which I believe you do not have" - $ECHO "*** because a test_compile did reveal that the linker did not use it for" - $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." + $echo + $echo "*** Warning: dynamic linker does not accept needed library $i." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which I believe you do not have" + $echo "*** because a test_compile did reveal that the linker did not use it for" + $echo "*** its dynamic dependency list that programs get resolved with at runtime." fi fi - ;; - *) + else newdeplibs="$newdeplibs $i" - ;; - esac + fi done else # Error occurred in the first compile. Let's try to salvage # the situation: Compile a separate program for each library. for i in $deplibs; do - case $i in - -l*) - func_stripname -l '' "$i" - name=$func_stripname_result - $opt_dry_run || $RM conftest + name=`expr $i : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then + $rm conftest if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ldd_output=`ldd conftest` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then @@ -6602,47 +3642,44 @@ EOF esac fi if test -n "$i" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` - set dummy $deplib_matches; shift - deplib_match=$1 + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then newdeplibs="$newdeplibs $i" else droppeddeps=yes - $ECHO - $ECHO "*** Warning: dynamic linker does not accept needed library $i." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because a test_compile did reveal that the linker did not use this one" - $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." + $echo + $echo "*** Warning: dynamic linker does not accept needed library $i." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because a test_compile did reveal that the linker did not use this one" + $echo "*** as a dynamic dependency that programs can get resolved with at runtime." fi fi else droppeddeps=yes - $ECHO - $ECHO "*** Warning! Library $i is needed by this library but I was not able to" - $ECHO "*** make it link in! You will probably need to install it or some" - $ECHO "*** library that it depends on before this library will be fully" - $ECHO "*** functional. Installing it before continuing would be even better." + $echo + $echo "*** Warning! Library $i is needed by this library but I was not able to" + $echo "*** make it link in! You will probably need to install it or some" + $echo "*** library that it depends on before this library will be fully" + $echo "*** functional. Installing it before continuing would be even better." fi - ;; - *) + else newdeplibs="$newdeplibs $i" - ;; - esac + fi done fi ;; file_magic*) - set dummy $deplibs_check_method; shift - file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + set dummy $deplibs_check_method + file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result + name=`expr $a_deplib : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) @@ -6652,13 +3689,13 @@ EOF esac fi if test -n "$a_deplib" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` + libname=`eval \\$echo \"$libname_spec\"` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null | - $GREP " -> " >/dev/null; then + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an @@ -6671,12 +3708,12 @@ EOF potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | - $SED -e 10q | - $EGREP "$file_magic_regex" > /dev/null; then + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 @@ -6686,35 +3723,32 @@ EOF fi if test -n "$a_deplib" ; then droppeddeps=yes - $ECHO - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because I did check the linker path looking for a file starting" + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + $echo "*** with $libname but no candidates were found. (...for file magic test)" else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a file magic. Last file checked: $potlib" + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a file magic. Last file checked: $potlib" fi fi - ;; - *) + else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" - ;; - esac + fi done # Gone through all deplibs. ;; match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result + name=`expr $a_deplib : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) @@ -6724,13 +3758,14 @@ EOF esac fi if test -n "$a_deplib" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` + libname=`eval \\$echo \"$libname_spec\"` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test - if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ - $EGREP "$match_pattern_regex" > /dev/null; then + if eval $echo \"$potent_lib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 @@ -6740,46 +3775,44 @@ EOF fi if test -n "$a_deplib" ; then droppeddeps=yes - $ECHO - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because I did check the linker path looking for a file starting" + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + $echo "*** with $libname but no candidates were found. (...for regex pattern test)" else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a regex pattern. Last file checked: $potlib" + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a regex pattern. Last file checked: $potlib" fi fi - ;; - *) + else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" - ;; - esac + fi done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" - tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ - -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` + tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` + tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` done fi - if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | - $GREP . >/dev/null; then - $ECHO + if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ + | grep . >/dev/null; then + $echo if test "X$deplibs_check_method" = "Xnone"; then - $ECHO "*** Warning: inter-library dependencies are not supported in this platform." + $echo "*** Warning: inter-library dependencies are not supported in this platform." else - $ECHO "*** Warning: inter-library dependencies are not known to be supported." + $echo "*** Warning: inter-library dependencies are not known to be supported." fi - $ECHO "*** All declared inter-library dependencies are being dropped." + $echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; @@ -6792,24 +3825,24 @@ EOF case $host in *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then - $ECHO - $ECHO "*** Warning: libtool could not satisfy all declared inter-library" - $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - $ECHO "*** a static module, that should work as long as the dlopening" - $ECHO "*** application is linked with the -dlopen flag." + $echo + $echo "*** Warning: libtool could not satisfy all declared inter-library" + $echo "*** dependencies of module $libname. Therefore, libtool will create" + $echo "*** a static module, that should work as long as the dlopening" + $echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - $ECHO - $ECHO "*** However, this would only work if libtool was able to extract symbol" - $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" - $ECHO "*** not find such a program. So, this module is probably useless." - $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -6819,16 +3852,16 @@ EOF build_libtool_libs=no fi else - $ECHO "*** The inter-library dependencies that have been dropped here will be" - $ECHO "*** automatically added whenever a program is linked with this library" - $ECHO "*** or is declared to -dlopen it." + $echo "*** The inter-library dependencies that have been dropped here will be" + $echo "*** automatically added whenever a program is linked with this library" + $echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then - $ECHO - $ECHO "*** Since this library must not contain undefined symbols," - $ECHO "*** because either the platform does not support them or" - $ECHO "*** it was explicitly requested with -no-undefined," - $ECHO "*** libtool will only create a static version of it." + $echo + $echo "*** Since this library must not contain undefined symbols," + $echo "*** because either the platform does not support them or" + $echo "*** it was explicitly requested with -no-undefined," + $echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module @@ -6842,14 +3875,7 @@ EOF # Done checking deplibs! deplibs=$newdeplibs fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - case $host in - *-*-darwin*) - newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac + # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list @@ -6878,6 +3904,7 @@ EOF done deplibs="$new_libs" + # All the library-specific variables (install_libdir is set above). library_names= old_library= @@ -6922,7 +3949,10 @@ EOF test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" if test -n "$hardcode_libdir_flag_spec_ld"; then - eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + case $archive_cmds in + *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;; + *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;; + esac else eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi @@ -6948,9 +3978,8 @@ EOF eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names - shift - realname="$1" - shift + realname="$2" + shift; shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" @@ -6969,122 +3998,71 @@ EOF done # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - test "X$libobjs" = "X " && libobjs= - - delfiles= - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols="$output_objdir/$libname.uexp" - delfiles="$delfiles $export_symbols" - fi - - orig_export_symbols= - case $host_os in - cygwin* | mingw* | cegcc*) - if test -n "$export_symbols" && test -z "$export_symbols_regex"; then - # exporting using user supplied symfile - if test "x`$SED 1q $export_symbols`" != xEXPORTS; then - # and it's NOT already a .def file. Must figure out - # which of the given symbols are data symbols and tag - # them as such. So, trigger use of export_symbols_cmds. - # export_symbols gets reassigned inside the "prepare - # the list of exported symbols" if statement, so the - # include_expsyms logic still works. - orig_export_symbols="$export_symbols" - export_symbols= - always_export_symbols=yes - fi - fi - ;; - esac + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for \`$libname.la'" + $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" - $opt_dry_run || $RM $export_symbols + $run $rm $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" - func_len " $cmd" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - func_show_eval "$cmd" 'exit $?' - skipped_export=false + if len=`expr "X$cmd" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + $show "$cmd" + $run eval "$cmd" || exit $? + skipped_export=false else - # The command line is too long to execute in one step. - func_verbose "using reloadable object file for export list..." - skipped_export=: + # The command line is too long to execute in one step. + $show "using reloadable object file for export list..." + skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" - if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + if test -n "$export_symbols_regex"; then + $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' - fi - - if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' fi tmp_deplibs= for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - tmp_deplibs="$tmp_deplibs $test_deplib" - ;; - esac + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec" && - test "$compiler_needs_object" = yes && - test -z "$libobjs"; then - # extract the archives, so we have objects to list. - # TODO: could optimize this to just extract one archive. - whole_archive_flag_spec= - fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $convenience libobjs="$libobjs $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= fi fi - + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" @@ -7092,7 +4070,7 @@ EOF # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? fi # Do each of the archive commands. @@ -7105,24 +4083,22 @@ EOF cmds=$module_cmds fi else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && - func_len " $test_cmds" && - len=$func_len_result && - test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else - # The command line is too long to link in one step, link piecewise - # or, if using GNU ld and skipped_export is not :, use a linker - # script. + # The command line is too long to link in one step, link piecewise. + $echo "creating reloadable object files..." # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we @@ -7136,162 +4112,77 @@ EOF save_libobjs=$libobjs fi save_output=$output - output_la=`$ECHO "X$output" | $Xsed -e "$basename"` + output_la=`$echo "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= + delfiles= last_robj= k=1 - - if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then - output=${output_objdir}/${output_la}.lnkscript - func_verbose "creating GNU ld script: $output" - $ECHO 'INPUT (' > $output - for obj in $save_libobjs - do - $ECHO "$obj" >> $output - done - $ECHO ')' >> $output - delfiles="$delfiles $output" - elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then - output=${output_objdir}/${output_la}.lnk - func_verbose "creating linker input file list: $output" - : > $output - set x $save_libobjs - shift - firstobj= - if test "$compiler_needs_object" = yes; then - firstobj="$1 " - shift - fi - for obj - do - $ECHO "$obj" >> $output - done - delfiles="$delfiles $output" - output=$firstobj\"$file_list_spec$output\" - else - if test -n "$save_libobjs"; then - func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-${k}.$objext - eval test_cmds=\"$reload_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - if test "X$objlist" = X || - test "$len" -lt "$max_cmd_len"; then - func_append objlist " $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" - fi - last_robj=$output_objdir/$output_la-${k}.$objext - func_arith $k + 1 - k=$func_arith_result - output=$output_objdir/$output_la-${k}.$objext - objlist=$obj - func_len " $last_robj" - func_arith $len0 + $func_len_result - len=$func_arith_result - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - if test -n "$last_robj"; then - eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" - fi - delfiles="$delfiles $output" - + output=$output_objdir/$output_la-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || + { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" else - output= - fi - - if ${skipped_export-false}; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $opt_dry_run || $RM $export_symbols - libobjs=$output - # Append the command to create the export file. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" fi + last_robj=$output_objdir/$output_la-${k}.$objext + k=`expr $k + 1` + output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + len=1 fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + + if ${skipped_export-false}; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + libobjs=$output + # Append the command to create the export file. + eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi + + # Set up a command to remove the reloadable object files + # after they are used. + i=0 + while test "$i" -lt "$k" + do + i=`expr $i + 1` + delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" + done - test -n "$save_libobjs" && - func_verbose "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $opt_silent || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi + $echo "creating a temporary reloadable object file: $output" - exit $lt_exit - } - done + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do IFS="$save_ifs" - - if test -n "$export_symbols_regex" && ${skipped_export-false}; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - - if ${skipped_export-false}; then - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' - fi - - if test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - fi + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" libobjs=$output # Restore the value of output. @@ -7299,7 +4190,6 @@ EOF if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. @@ -7312,45 +4202,28 @@ EOF cmds=$module_cmds fi else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds fi fi - fi - - if test -n "$delfiles"; then - # Append the command to remove temporary files to $cmds. - eval cmds=\"\$cmds~\$RM $delfiles\" - fi - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $dlprefiles - libobjs="$libobjs $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= + # Append the command to remove the reloadable object files + # to the just-reset $cmds. + eval cmds=\"\$cmds~\$rm $delfiles\" fi - save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" - $opt_silent || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { + $show "$cmd" + $run eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' fi exit $lt_exit @@ -7360,11 +4233,12 @@ EOF # Restore the uninstalled library and exit if test "$mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then - func_show_eval '${RM}r "$gentop"' + $show "${rm}r $gentop" + $run ${rm}r "$gentop" fi fi @@ -7374,7 +4248,8 @@ EOF # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then - func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? fi done @@ -7387,35 +4262,39 @@ EOF ;; obj) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for objects" - fi - case " $deplibs" in *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for objects" ;; + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;; esac - test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for objects" + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi - test -n "$xrpath" && \ - func_warning "\`-R' is ignored for objects" + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi - test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for objects" + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi - test -n "$release" && \ - func_warning "\`-release' is ignored for objects" + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi case $output in *.lo) - test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object \`$output' from non-libtool objects" - - libobj=$output - func_lo2o "$libobj" - obj=$func_lo2o_result + if test -n "$objs$old_deplibs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit $EXIT_FAILURE + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` ;; *) libobj= @@ -7424,7 +4303,7 @@ EOF esac # Delete the old objects. - $opt_dry_run || $RM $obj $libobj + $run $rm $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create @@ -7440,7 +4319,7 @@ EOF if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` + reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" generated="$generated $gentop" @@ -7451,15 +4330,24 @@ EOF fi # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" - func_execute_cmds "$reload_cmds" 'exit $?' + cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' + $show "${rm}r $gentop" + $run ${rm}r $gentop fi exit $EXIT_SUCCESS @@ -7467,13 +4355,14 @@ EOF if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' + $show "${rm}r $gentop" + $run ${rm}r $gentop fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" - # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + # $run eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi @@ -7481,11 +4370,20 @@ EOF # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" - func_execute_cmds "$reload_cmds" 'exit $?' + cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" fi if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' + $show "${rm}r $gentop" + $run ${rm}r $gentop fi exit $EXIT_SUCCESS @@ -7493,45 +4391,39 @@ EOF prog) case $host in - *cygwin*) func_stripname '' '.exe' "$output" - output=$func_stripname_result.exe;; + *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; esac - test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for programs" + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi - test -n "$release" && \ - func_warning "\`-release' is ignored for programs" + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi - test "$preload" = yes \ - && test "$dlopen_support" = unknown \ - && test "$dlopen_self" = unknown \ - && test "$dlopen_self_static" = unknown && \ - func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + if test "$preload" = yes; then + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && + test "$dlopen_self_static" = unknown; then + $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + fi + fi case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac case $host in - *-*-darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - # But is supposedly fixed on 10.4 or later (yay!). - if test "$tagname" = CXX ; then - case ${MACOSX_DEPLOYMENT_TARGET-10.0} in - 10.[0123]) - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - ;; - esac - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; + *darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + if test "$tagname" = CXX ; then + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + fi + ;; esac @@ -7606,16 +4498,14 @@ EOF esac fi case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; - ::) dllsearchpath=$libdir;; *) dllsearchpath="$dllsearchpath:$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; @@ -7667,51 +4557,281 @@ EOF if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. - compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + dlsyms= + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${outputname}S.c" + else + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + fi fi - func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + if test -n "$dlsyms"; then + case $dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${outputname}.nm" + + $show "$rm $nlist ${nlist}S ${nlist}T" + $run $rm "$nlist" "${nlist}S" "${nlist}T" + + # Parse the name list into a source file. + $show "creating $output_objdir/$dlsyms" + + test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* Prevent the only kind of declaration conflicts we can make. */ +#define lt_preloaded_symbols some_other_symbol + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + $show "generating symbol list for \`$output'" + + test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - # template prelinking step - if test -n "$prelink_cmds"; then - func_execute_cmds "$prelink_cmds" 'exit $?' + # Add our own program objects to the symbol list. + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for arg in $progfiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then + $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $run $rm $export_symbols + $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* ) + $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + else + $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* ) + $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` + $run eval '$echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -z "$run"; then + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if grep -v "^: " < "$nlist" | + if sort -k 3 </dev/null >/dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else + $echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ + +#undef lt_preloaded_symbols + +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +" + + case $host in + *cygwin* | *mingw* ) + $echo >> "$output_objdir/$dlsyms" "\ +/* DATA imports from DLLs on WIN32 can't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs */ +struct { +" + ;; + * ) + $echo >> "$output_objdir/$dlsyms" "\ +const struct { +" + ;; + esac + + + $echo >> "$output_objdir/$dlsyms" "\ + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[] = +{\ +" + + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ + {0, (lt_ptr) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + fi + + pic_flag_for_symtable= + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag";; + esac + esac + + # Now compile the dynamic symbol file. + $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. + case $host in + *cygwin* | *mingw* ) + if test -f "$output_objdir/${outputname}.def" ; then + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` + else + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` + fi + ;; + * ) + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` + ;; + esac + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit $EXIT_FAILURE + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` fi - wrappers_required=yes - case $host in - *cygwin* | *mingw* ) - if test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; - *cegcc) - # Disable wrappers for cegcc, we are cross compiling anyway. - wrappers_required=no - ;; - *) - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; - esac - if test "$wrappers_required" = no; then + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. - compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. - exit_status=0 - func_show_eval "$link_command" 'exit_status=$?' + $show "$link_command" + $run eval "$link_command" + exit_status=$? # Delete the generated files. - if test -f "$output_objdir/${outputname}S.${objext}"; then - func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + if test -n "$dlsyms"; then + $show "$rm $output_objdir/${outputname}S.${objext}" + $run $rm "$output_objdir/${outputname}S.${objext}" fi exit $exit_status fi + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi @@ -7744,11 +4864,12 @@ EOF # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. - link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. - $opt_dry_run || $RM $output + $run $rm $output # Link the executable and exit - func_show_eval "$link_command" 'exit $?' + $show "$link_command" + $run eval "$link_command" || exit $? exit $EXIT_SUCCESS fi @@ -7757,13 +4878,13 @@ EOF link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" - func_warning "this platform does not like uninstalled shared libraries" - func_warning "\`$output' will be relinked during installation" + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 + $echo "$modename: \`$output' will be relinked during installation" 1>&2 else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then - relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` else # fast_install is set to needless relink_command= @@ -7775,103 +4896,608 @@ EOF fi # Replace the output file specification. - link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. - $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname - func_show_eval "$link_command" 'exit $?' + $show "$link_command" + $run eval "$link_command" || exit $? # Now create the wrapper script. - func_verbose "creating $output" + $show "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` fi - # Quote $ECHO for shipping. - if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then + # Quote $echo for shipping. + if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then case $progpath in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac - qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` else - qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` fi - # Only actually do things if not in dry run mode. - $opt_dry_run || { + # Only actually do things if our run command is non-null. + if test -z "$run"; then # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in - *.exe) func_stripname '' '.exe' "$output" - output=$func_stripname_result ;; + *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe - func_stripname '' '.exe' "$outputname" - outputname=$func_stripname_result ;; + outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) - func_dirname_and_basename "$output" "" "." - output_name=$func_basename_result - output_path=$func_dirname_result - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" - $RM $cwrappersource $cwrapper - trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - func_emit_cwrapperexe_src > $cwrappersource - - # The wrapper executable is built using the $host compiler, - # because it contains $host paths and files. If cross- - # compiling, it, like the target executable, must be - # executed on the $host or under an emulation environment. - $opt_dry_run || { - $LTCC $LTCFLAGS -o $cwrapper $cwrappersource - $STRIP $cwrapper - } + output_name=`basename $output` + output_path=`dirname $output` + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $rm $cwrappersource $cwrapper + trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - # Now, create the wrapper script for func_source use: - func_ltwrapper_scriptname $cwrapper - $RM $func_ltwrapper_scriptname_result - trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 - $opt_dry_run || { - # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host" ; then - $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result - else - func_emit_wrapper no > $func_ltwrapper_scriptname_result - fi - } + cat > $cwrappersource <<EOF + +/* $cwrappersource - temporary wrapper executable for $objdir/$outputname + Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP + + The $output program cannot be directly executed until all the libtool + libraries that it depends on are installed. + + This wrapper executable should never be moved out of the build directory. + If it is, it will not operate correctly. + + Currently, it simply execs the wrapper *script* "/bin/sh $output", + but could eventually absorb all of the scripts functionality and + exec $objdir/$outputname directly. +*/ +EOF + cat >> $cwrappersource<<"EOF" +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <malloc.h> +#include <stdarg.h> +#include <assert.h> +#include <string.h> +#include <ctype.h> +#include <sys/stat.h> + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +/* -DDEBUG is fairly common in CFLAGS. */ +#undef DEBUG +#if defined DEBUGWRAPPER +# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) +#else +# define DEBUG(format, ...) +#endif + +const char *program_name = NULL; + +void * xmalloc (size_t num); +char * xstrdup (const char *string); +const char * base_name (const char *name); +char * find_executable(const char *wrapper); +int check_executable(const char *path); +char * strendzap(char *str, const char *pat); +void lt_fatal (const char *message, ...); + +int +main (int argc, char *argv[]) +{ + char **newargz; + int i; + + program_name = (char *) xstrdup (base_name (argv[0])); + DEBUG("(main) argv[0] : %s\n",argv[0]); + DEBUG("(main) program_name : %s\n",program_name); + newargz = XMALLOC(char *, argc+2); +EOF + + cat >> $cwrappersource <<EOF + newargz[0] = (char *) xstrdup("$SHELL"); +EOF + + cat >> $cwrappersource <<"EOF" + newargz[1] = find_executable(argv[0]); + if (newargz[1] == NULL) + lt_fatal("Couldn't find %s", argv[0]); + DEBUG("(main) found exe at : %s\n",newargz[1]); + /* we know the script has the same name, without the .exe */ + /* so make sure newargz[1] doesn't end in .exe */ + strendzap(newargz[1],".exe"); + for (i = 1; i < argc; i++) + newargz[i+1] = xstrdup(argv[i]); + newargz[argc+1] = NULL; + + for (i=0; i<argc+1; i++) + { + DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]); + ; + } + +EOF + + case $host_os in + mingw*) + cat >> $cwrappersource <<EOF + execv("$SHELL",(char const **)newargz); +EOF + ;; + *) + cat >> $cwrappersource <<EOF + execv("$SHELL",newargz); +EOF + ;; + esac + + cat >> $cwrappersource <<"EOF" + return 127; +} + +void * +xmalloc (size_t num) +{ + void * p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char)name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable(const char * path) +{ + struct stat st; + + DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) && + ( + /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ +#if defined (S_IXOTH) + ((st.st_mode & S_IXOTH) == S_IXOTH) || +#endif +#if defined (S_IXGRP) + ((st.st_mode & S_IXGRP) == S_IXGRP) || +#endif + ((st.st_mode & S_IXUSR) == S_IXUSR)) + ) + return 1; + else + return 0; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise */ +char * +find_executable (const char* wrapper) +{ + int has_slash = 0; + const char* p; + const char* p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char* concat_name; + + DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char* path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char* q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR(*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen(tmp); + concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen(tmp); + concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + return NULL; +} + +char * +strendzap(char *str, const char *pat) +{ + size_t len, patlen; + + assert(str != NULL); + assert(pat != NULL); + + len = strlen(str); + patlen = strlen(pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp(str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char * mode, + const char * message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} +EOF + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource + ;; + esac + $rm $output + trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + + $echo > $output "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variable: + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $echo >> $output "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $mkdir \"\$progdir\" + else + $rm \"\$progdir/\$file\" + fi" + + $echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $echo \"\$relink_command_output\" >&2 + $rm \"\$progdir/\$file\" + exit $EXIT_FAILURE + fi + fi + + $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $rm \"\$progdir/\$program\"; + $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $rm \"\$progdir/\$file\" + fi" + else + $echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $echo >> $output "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" ;; - * ) - $RM $output - trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - func_emit_wrapper no > $output - chmod +x $output + *) + $echo >> $output "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" ;; esac - } + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \$*\" + exit $EXIT_FAILURE + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + $echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit $EXIT_FAILURE + fi +fi\ +" + chmod +x $output + fi exit $EXIT_SUCCESS ;; esac @@ -7880,7 +5506,7 @@ EOF for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save $symfileobj" + oldobjs="$libobjs_save" addlibs="$convenience" build_libtool_libs=no else @@ -7889,9 +5515,6 @@ EOF build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" - if test "$preload" = yes && test -f "$symfileobj"; then - oldobjs="$oldobjs $symfileobj" - fi fi addlibs="$old_convenience" fi @@ -7906,18 +5529,8 @@ EOF # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds + cmds=$old_archive_from_new_cmds else - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $dlprefiles - oldobjs="$oldobjs $func_extract_archives_result" - fi - # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a @@ -7926,22 +5539,32 @@ EOF # not supported by libtool). if (for obj in $oldobjs do - func_basename "$obj" - $ECHO "$func_basename_result" + $echo "X$obj" | $Xsed -e 's%^.*/%%' done | sort | sort -uc >/dev/null 2>&1); then : else - $ECHO "copying selected object files to avoid basename conflicts..." - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - func_mkdir_p "$gentop" + $echo "copying selected object files to avoid basename conflicts..." + + if test -z "$gentop"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$gentop"; then + exit $exit_status + fi + fi + save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do - func_basename "$obj" - objbase="$func_basename_result" + objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) @@ -7949,62 +5572,58 @@ EOF # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase - func_arith $counter + 1 - counter=$func_arith_result + counter=`expr $counter + 1` case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done - func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + $run ln "$obj" "$gentop/$newobj" || + $run cp "$obj" "$gentop/$newobj" oldobjs="$oldobjs $gentop/$newobj" ;; *) oldobjs="$oldobjs $obj" ;; esac done fi + eval cmds=\"$old_archive_cmds\" - func_len " $cmds" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + if len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts - func_verbose "using piecewise archive linking..." + $echo "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs - oldobjs= + # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done - eval test_cmds=\"$old_archive_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 for obj in $save_oldobjs do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - func_append objlist " $obj" - if test "$len" -lt "$max_cmd_len"; then + oldobjs="$objlist $obj" + objlist="$objlist $obj" + eval test_cmds=\"$old_archive_cmds\" + if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB + RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= - len=$len0 fi done RANLIB=$save_RANLIB @@ -8016,39 +5635,49 @@ EOF fi fi fi - func_execute_cmds "$cmds" 'exit $?' + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + eval cmd=\"$cmd\" + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" done - test -n "$generated" && \ - func_show_eval "${RM}r$generated" + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" - func_verbose "creating $output" + $show "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` if test "$hardcode_automatic" = yes ; then relink_command= fi + # Only create the output if not a dry run. - $opt_dry_run || { + if test -z "$run"; then for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then @@ -8060,11 +5689,12 @@ EOF for deplib in $dependency_libs; do case $deplib in *.la) - func_basename "$deplib" - name="$func_basename_result" + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; @@ -8072,37 +5702,25 @@ EOF done dependency_libs="$newdependency_libs" newdlfiles= - for lib in $dlfiles; do - case $lib in - *.la) - func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" - newdlfiles="$newdlfiles $libdir/$name" - ;; - *) newdlfiles="$newdlfiles $lib" ;; - esac + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdlfiles="$newdlfiles $libdir/$name" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do - case $lib in - *.la) - # Only pass preopened files to the pseudo-archive (for - # eventual linking with the app. that links it) if we - # didn't already link the preopened objects directly into - # the library: - func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" - newdlprefiles="$newdlprefiles $libdir/$name" - ;; - esac + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdlprefiles="$newdlprefiles $libdir/$name" done dlprefiles="$newdlprefiles" else @@ -8125,15 +5743,15 @@ EOF done dlprefiles="$newdlprefiles" fi - $RM $output + $rm $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac - $ECHO > $output "\ + $echo > $output "\ # $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # Please DO NOT delete this file! # It is necessary for linking the library. @@ -8147,15 +5765,9 @@ library_names='$library_names' # The name of the static archive. old_library='$old_library' -# Linker flags that can not go in dependency_libs. -inherited_linker_flags='$new_inherited_linker_flags' - # Libraries that this one depends upon. dependency_libs='$dependency_libs' -# Names of additional weak libraries provided by this library -weak_library_names='$weak_libs' - # Version information for $libname. current=$current age=$age @@ -8174,29 +5786,748 @@ dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then - $ECHO >> $output "\ + $echo >> $output "\ relink_command=\"$relink_command\"" fi done - } + fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. - func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac exit $EXIT_SUCCESS -} + ;; -{ test "$mode" = link || test "$mode" = relink; } && - func_mode_link ${1+"$@"} + # libtool install mode + install) + modename="$modename: install" + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg=$nonopt + fi -# func_mode_uninstall arg... -func_mode_uninstall () -{ - $opt_debug - RM="$nonopt" + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) prev=$arg ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test "$#" -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + library_names= + old_library= + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + if test "$inst_prefix_dir" = "$destdir"; then + $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` + else + relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` + fi + + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + exit $EXIT_FAILURE + fi + fi + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + if test "$linkname" != "$realname"; then + $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + cmds=$postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + instname="$dir/$name"i + $show "$install_prog $instname $destdir/$name" + $run eval "$install_prog $instname $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + file=`$echo $file|${SED} 's,.exe$,,'` + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin*|*mingw*) + wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac + if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + notinst_deplibs= + relink_command= + + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # + # If there is no directory component, then add one. + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; + esac + + # Check the variables that should have been set. + if test -z "$notinst_deplibs"; then + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 + exit $EXIT_FAILURE + fi + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + relink_command= + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # + # If there is no directory component, then add one. + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then + tmpdir=`func_mktempdir` + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` + + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + ${rm}r "$tmpdir" + continue + fi + file="$outputname" + else + $echo "$modename: warning: cannot relink \`$file'" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` + ;; + esac + ;; + esac + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + test -n "$outputname" && ${rm}r "$tmpdir" + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + if test -n "$stripme" && test -n "$old_striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + + # Do each command in the postinstall commands. + cmds=$old_postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + cmds=$finish_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + test "$show" = : && exit $EXIT_SUCCESS + + $echo "X----------------------------------------------------------------------" | $Xsed + $echo "Libraries have been installed in:" + for libdir in $libdirs; do + $echo " $libdir" + done + $echo + $echo "If you ever happen to want to link against installed libraries" + $echo "in a given directory, LIBDIR, you must either use libtool, and" + $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + $echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + $echo " during execution" + fi + if test -n "$runpath_var"; then + $echo " - add LIBDIR to the \`$runpath_var' environment variable" + $echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $echo + $echo "See any operating system documentation about shared libraries for" + $echo "more information, such as the ld(1) and ld.so(8) manual pages." + $echo "X----------------------------------------------------------------------" | $Xsed + exit $EXIT_SUCCESS + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit $EXIT_FAILURE + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + if test ! -f "$dir/$dlname"; then + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit $EXIT_FAILURE + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + fi + $echo "$cmd$args" + exit $EXIT_SUCCESS + fi + ;; + + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" + rm="$nonopt" files= rmforce= exit_status=0 @@ -8208,28 +6539,30 @@ func_mode_uninstall () for arg do case $arg in - -f) RM="$RM $arg"; rmforce=yes ;; - -*) RM="$RM $arg" ;; + -f) rm="$rm $arg"; rmforce=yes ;; + -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac done - test -z "$RM" && \ - func_fatal_help "you must specify an RM program" + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi rmdirs= origobjdir="$objdir" for file in $files; do - func_dirname "$file" "" "." - dir="$func_dirname_result" - if test "X$dir" = X.; then + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$file"; then + dir=. objdir="$origobjdir" else objdir="$dir/$origobjdir" fi - func_basename "$file" - name="$func_basename_result" + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates @@ -8241,9 +6574,9 @@ func_mode_uninstall () fi # Don't error if the file doesn't exist and rm -f was used. - if { test -L "$file"; } >/dev/null 2>&1 || - { test -h "$file"; } >/dev/null 2>&1 || - test -f "$file"; then + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then : elif test -d "$file"; then exit_status=1 @@ -8257,8 +6590,8 @@ func_mode_uninstall () case $name in *.la) # Possibly a libtool archive, so verify it. - if func_lalib_p "$file"; then - func_source $dir/$name + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do @@ -8273,17 +6606,39 @@ func_mode_uninstall () *" $dlname "*) ;; *) rmfiles="$rmfiles $objdir/$dlname" ;; esac - test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + cmds=$postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + cmds=$old_postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" fi # FIXME: should reinstall the best remaining shared library. ;; @@ -8293,20 +6648,20 @@ func_mode_uninstall () *.lo) # Possibly a libtool object, so verify it. - if func_lalib_p "$file"; then + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # Read the .lo file - func_source $dir/$name + . $dir/$name # Add PIC object to the list of files to remove. - if test -n "$pic_object" && - test "$pic_object" != none; then + if test -n "$pic_object" \ + && test "$pic_object" != none; then rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && - test "$non_pic_object" != none; then + if test -n "$non_pic_object" \ + && test "$non_pic_object" != none; then rmfiles="$rmfiles $dir/$non_pic_object" fi fi @@ -8317,26 +6672,17 @@ func_mode_uninstall () noexename=$name case $file in *.exe) - func_stripname '' '.exe' "$file" - file=$func_stripname_result - func_stripname '' '.exe' "$name" - noexename=$func_stripname_result + file=`$echo $file|${SED} 's,.exe$,,'` + noexename=`$echo $name|${SED} 's,.exe$,,'` # $file with .exe has already been added to rmfiles, # add $file without .exe rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. - if func_ltwrapper_p "$file"; then - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - relink_command= - func_source $func_ltwrapper_scriptname_result - rmfiles="$rmfiles $func_ltwrapper_scriptname_result" - else - relink_command= - func_source $dir/$noexename - fi + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$noexename # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles @@ -8351,38 +6697,239 @@ func_mode_uninstall () fi ;; esac - func_show_eval "$RM $rmfiles" 'exit_status=1' + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 done objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then - func_show_eval "rmdir $dir >/dev/null 2>&1" + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 fi done exit $exit_status -} - -{ test "$mode" = uninstall || test "$mode" = clean; } && - func_mode_uninstall ${1+"$@"} + ;; -test -z "$mode" && { - help="$generic_help" - func_fatal_help "you must specify a MODE" -} + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit $EXIT_FAILURE + ;; + esac -test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$mode'" + if test -z "$exec_cmd"; then + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit $EXIT_FAILURE + fi +fi # test -z "$show_help" if test -n "$exec_cmd"; then - eval exec "$exec_cmd" + eval exec $exec_cmd exit $EXIT_FAILURE fi -exit $exit_status +# We need to display help for each of the modes. +case $mode in +"") $echo \ +"Usage: $modename [OPTION]... [MODE-ARG]... + +Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing +-n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + --version print version information + +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +a more detailed description of MODE. + +Report bugs to <bug-libtool@gnu.org>." + exit $EXIT_SUCCESS + ;; + +clean) + $echo \ +"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + +compile) + $echo \ +"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -static always build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + +execute) + $echo \ +"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + +finish) + $echo \ +"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + +install) + $echo \ +"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + +link) + $echo \ +"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + +uninstall) + $echo \ +"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + +*) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; +esac + +$echo +$echo "Try \`$modename --help' for more information about other modes." + +exit $? # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting @@ -8396,17 +6943,14 @@ exit $exit_status # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes +disable_libs=shared # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +disable_libs=static # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: -# vi:sw=2 - |