diff options
Diffstat (limited to 'src/modules/common/compress.cpp.txt')
| -rw-r--r-- | src/modules/common/compress.cpp.txt | 767 |
1 files changed, 767 insertions, 0 deletions
diff --git a/src/modules/common/compress.cpp.txt b/src/modules/common/compress.cpp.txt new file mode 100644 index 0000000..5031adb --- /dev/null +++ b/src/modules/common/compress.cpp.txt @@ -0,0 +1,767 @@ +Compression Info, 10-11-95 +Jeff Wheeler + +Source of Algorithm +------------------- + +The compression algorithms used here are based upon the algorithms developed and published by Haruhiko Okumura in a paper entitled "Data Compression Algorithms of LARC and LHarc." This paper discusses three compression algorithms, LSZZ, LZARI, and LZHUF. LZSS is described as the "first" of these, and is described as providing moderate compression with good speed. LZARI is described as an improved LZSS, a combination of the LZSS algorithm with adaptive arithmetic compression. It is described as being slower than LZSS but with better compression. LZHUF (the basis of the common LHA compression program) was included in the paper, however, a free usage license was not included. + +The following are copies of the statements included at the beginning of each source code listing that was supplied in the working paper. + + LZSS, dated 4/6/89, marked as "Use, distribute and + modify this program freely." + + LZARI, dated 4/7/89, marked as "Use, distribute and + modify this program freely." + + LZHUF, dated 11/20/88, written by Haruyasu Yoshizaki, + translated by Haruhiko Okumura on 4/7/89. Not + expressly marked as redistributable or modifiable. + +Since both LZSS and LZARI are marked as "use, distribute and modify freely" we have felt at liberty basing our compression algorithm on either of these. + +Selection of Algorithm +---------------------- + +Working samples of three possible compression algorithms are supplied in Okumura's paper. Which should be used? + +LZSS is the fastest at decompression, but does not generated as small a compressed file as the other methods. The other two methods provided, perhaps, a 15% improvement in compression. Or, put another way, on a 100K file, LZSS might compress it to 50K while the others might approach 40-45K. For STEP purposes, it was decided that decoding speed was of more importance than tighter compression. For these reasons, the first compression algorithm implemented is the LZSS algorithm. + +About LZSS Encoding +------------------- + +(adapted from Haruhiko Okumura's paper) + +This scheme was proposed by Ziv and Lempel [1]. A slightly modified version is described by Storer and Szymanski [2]. An implementation using a binary tree has been proposed by Bell [3]. + +The algorithm is quite simple. +1. Keep a ring buffer which initially contains all space characters. +2. Read several letters from the file to the buffer. +3. Search the buffer for the longest string that matches the letters just read, and send its length and position into the buffer. + +If the ring buffer is 4096 bytes, the position can be stored in 12 bits. If the length is represented in 4 bits, the <position, length> pair is two bytes long. If the longest match is no more than two characters, then just one character is sent without encoding. The process starts again with the next character. An extra bit is sent each time to tell the decoder whether the next item is a character of a <position, length> pair. + +[1] J. Ziv and A. Lempel, IEEE Transactions IT-23, 337-343 (1977). +[2] J. A. Storer and T. G. Szymanski, J. ACM, 29, 928-951 (1982). +[3] T.C. Gell, IEEE Transactions COM-34, 1176-1182 (1986). + +void InitTree( // no return value + void); // no parameters + +void InsertNode( // no return value + short int Pos); // position in the buffer + +void DeleteNode( // no return value + short int Node); // node to be removed + +void Encode( // no return value + void); // no parameters + +void Decode( // no return value + void); // no parameters + +// The following are constant sizes used by the compression algorithm. +// +// N - This is the size of the ring buffer. It is set +// to 4K. It is important to note that a position +// within the ring buffer requires 12 bits. +// +// F - This is the maximum length of a character sequence +// that can be taken from the ring buffer. It is set +// to 18. Note that a length must be 3 before it is +// worthwhile to store a position/length pair, so the +// length can be encoded in only 4 bits. Or, put yet +// another way, it is not necessary to encode a length +// of 0-18, it is necessary to encode a length of +// 3-18, which requires 4 bits. +// +// THRESHOLD - It takes 2 bytes to store an offset and +// a length. If a character sequence only +// requires 1 or 2 characters to store +// uncompressed, then it is better to store +// it uncompressed than as an offset into +// the ring buffer. +// +// Note that the 12 bits used to store the position and the 4 bits +// used to store the length equal a total of 16 bits, or 2 bytes. + +#define N 4096 +#define F 18 +#define THRESHOLD 3 +#define NOT_USED N + +// m_ring_buffer is a text buffer. It contains "nodes" of +// uncompressed text that can be indexed by position. That is, +// a substring of the ring buffer can be indexed by a position +// and a length. When decoding, the compressed text may contain +// a position in the ring buffer and a count of the number of +// bytes from the ring buffer that are to be moved into the +// uncompressed buffer. +// +// This ring buffer is not maintained as part of the compressed +// text. Instead, it is reconstructed dynamically. That is, +// it starts out empty and gets built as the text is decompressed. +// +// The ring buffer contain N bytes, with an additional F - 1 bytes +// to facilitate string comparison. + +unsigned char m_ring_buffer[N + F - 1]; + +// m_match_position and m_match_length are set by InsertNode(). +// +// These variables indicate the position in the ring buffer +// and the number of characters at that position that match +// a given string. + +short int m_match_position; +short int m_match_length; + +// m_lson, m_rson, and m_dad are the Japanese way of referring to +// a tree structure. The dad is the parent and it has a right and +// left son (child). +// +// For i = 0 to N-1, m_rson[i] and m_lson[i] will be the right +// and left children of node i. +// +// For i = 0 to N-1, m_dad[i] is the parent of node i. +// +// For i = 0 to 255, rson[N + i + 1] is the root of the tree for +// strings that begin with the character i. Note that this requires +// one byte characters. +// +// These nodes store values of 0...(N-1). Memory requirements +// can be reduces by using 2-byte integers instead of full 4-byte +// integers (for 32-bit applications). Therefore, these are +// defined as "short ints." + +short int m_lson[N + 1]; +short int m_rson[N + 257]; +short int m_dad[N + 1]; + +/* + ------------------------------------------------------------------------- + cLZSS::InitTree + + This function initializes the tree nodes to "empty" states. + ------------------------------------------------------------------------- +*/ + +void cLZSS::InitTree( // no return value + void) // no parameters + throw() // exception list + + { + int i; + + // For i = 0 to N - 1, m_rson[i] and m_lson[i] will be the right + // and left children of node i. These nodes need not be + // initialized. However, for debugging purposes, it is nice to + // have them initialized. Since this is only used for compression + // (not decompression), I don't mind spending the time to do it. + // + // For the same range of i, m_dad[i] is the parent of node i. + // These are initialized to a known value that can represent + // a "not used" state. + + for (i = 0; i < N; i++) + { + m_lson[i] = NOT_USED; + m_rson[i] = NOT_USED; + m_dad[i] = NOT_USED; + } + + // For i = 0 to 255, m_rson[N + i + 1] is the root of the tree + // for strings that begin with the character i. This is why + // the right child array is larger than the left child array. + // These are also initialzied to a "not used" state. + // + // Note that there are 256 of these, one for each of the possible + // 256 characters. + + for (i = N + 1; i <= (N + 256); i++) + { + m_rson[i] = NOT_USED; + } + + // Done. + } + +/* + ------------------------------------------------------------------------- + cLZSS::InsertNode + + This function inserts a string from the ring buffer into one of + the trees. It loads the match position and length member variables + for the longest match. + + The string to be inserted is identified by the parameter Pos, + A full F bytes are inserted. So, m_ring_buffer[Pos ... Pos+F-1] + are inserted. + + If the matched length is exactly F, then an old node is removed + in favor of the new one (because the old one will be deleted + sooner). + + Note that Pos plays a dual role. It is used as both a position + in the ring buffer and also as a tree node. m_ring_buffer[Pos] + defines a character that is used to identify a tree node. + ------------------------------------------------------------------------- +*/ + +void cLZSS::InsertNode( // no return value + short int Pos) // position in the buffer + throw() // exception list + + { + short int i; + short int p; + int cmp; + unsigned char * key; + + ASSERT(Pos >= 0); + ASSERT(Pos < N); + + cmp = 1; + key = &(m_ring_buffer[Pos]); + + // The last 256 entries in m_rson contain the root nodes for + // strings that begin with a letter. Get an index for the + // first letter in this string. + + p = (short int) (N + 1 + key[0]); + + // Set the left and right tree nodes for this position to "not + // used." + + m_lson[Pos] = NOT_USED; + m_rson[Pos] = NOT_USED; + + // Haven't matched anything yet. + + m_match_length = 0; + + for ( ; ; ) + { + if (cmp >= 0) + { + if (m_rson[p] != NOT_USED) + { + p = m_rson[p]; + } + else + { + m_rson[p] = Pos; + m_dad[Pos] = p; + return; + } + } + else + { + if (m_lson[p] != NOT_USED) + { + p = m_lson[p]; + } + else + { + m_lson[p] = Pos; + m_dad[Pos] = p; + return; + } + } + + // Should we go to the right or the left to look for the + // next match? + + for (i = 1; i < F; i++) + { + cmp = key[i] - m_ring_buffer[p + i]; + if (cmp != 0) + break; + } + + if (i > m_match_length) + { + m_match_position = p; + m_match_length = i; + + if (i >= F) + break; + } + } + + m_dad[Pos] = m_dad[p]; + m_lson[Pos] = m_lson[p]; + m_rson[Pos] = m_rson[p]; + + m_dad[ m_lson[p] ] = Pos; + m_dad[ m_rson[p] ] = Pos; + + if (m_rson[ m_dad[p] ] == p) + { + m_rson[ m_dad[p] ] = Pos; + } + else + { + m_lson[ m_dad[p] ] = Pos; + } + + // Remove "p" + + m_dad[p] = NOT_USED; + } + +/* + ------------------------------------------------------------------------- + cLZSS::DeleteNode + + This function removes the node "Node" from the tree. + ------------------------------------------------------------------------- +*/ + +void cLZSS::DeleteNode( // no return value + short int Node) // node to be removed + throw() // exception list + + { + short int q; + + ASSERT(Node >= 0); + ASSERT(Node < (N+1)); + + if (m_dad[Node] == NOT_USED) + { + // not in tree, nothing to do + return; + } + + if (m_rson[Node] == NOT_USED) + { + q = m_lson[Node]; + } + else if (m_lson[Node] == NOT_USED) + { + q = m_rson[Node]; + } + else + { + q = m_lson[Node]; + if (m_rson[q] != NOT_USED) + { + do + { + q = m_rson[q]; + } + while (m_rson[q] != NOT_USED); + + m_rson[ m_dad[q] ] = m_lson[q]; + m_dad[ m_lson[q] ] = m_dad[q]; + m_lson[q] = m_lson[Node]; + m_dad[ m_lson[Node] ] = q; + } + + m_rson[q] = m_rson[Node]; + m_dad[ m_rson[Node] ] = q; + } + + m_dad[q] = m_dad[Node]; + + if (m_rson[ m_dad[Node] ] == Node) + { + m_rson[ m_dad[Node] ] = q; + } + else + { + m_lson[ m_dad[Node] ] = q; + } + + m_dad[Node] = NOT_USED; + } + +/* + ------------------------------------------------------------------------- + cLZSS::Encode + + This function "encodes" the input stream into the output stream. + The GetChars() and SendChars() functions are used to separate + this method from the actual i/o. + ------------------------------------------------------------------------- +*/ + +void cLZSS::Encode( // no return value + void) // no parameters + + { + short int i; // an iterator + short int r; // node number in the binary tree + short int s; // position in the ring buffer + unsigned short int len; // len of initial string + short int last_match_length; // length of last match + short int code_buf_pos; // position in the output buffer + unsigned char code_buf[17]; // the output buffer + unsigned char mask; // bit mask for byte 0 of out buf + unsigned char c; // character read from string + + // Start with a clean tree. + + InitTree(); + + // code_buf[0] works as eight flags. A "1" represents that the + // unit is an unencoded letter (1 byte), and a "0" represents + // that the next unit is a <position,length> pair (2 bytes). + // + // code_buf[1..16] stores eight units of code. Since the best + // we can do is store eight <position,length> pairs, at most 16 + // bytes are needed to store this. + // + // This is why the maximum size of the code buffer is 17 bytes. + + code_buf[0] = 0; + code_buf_pos = 1; + + // Mask iterates over the 8 bits in the code buffer. The first + // character ends up being stored in the low bit. + // + // bit 8 7 6 5 4 3 2 1 + // | | + // | first sequence in code buffer + // | + // last sequence in code buffer + + mask = 1; + + s = 0; + r = (short int) N - (short int) F; + + // Initialize the ring buffer with spaces... + + // Note that the last F bytes of the ring buffer are not filled. + // This is because those F bytes will be filled in immediately + // with bytes from the input stream. + + memset(m_ring_buffer, ' ', N - F); + + // Read F bytes into the last F bytes of the ring buffer. + // + // This function loads the buffer with X characters and returns + // the actual amount loaded. + + len = GetChars(&(m_ring_buffer[r]), F); + + // Make sure there is something to be compressed. + + if (len == 0) + return; + + // Insert the F strings, each of which begins with one or more + // 'space' characters. Note the order in which these strings + // are inserted. This way, degenerate trees will be less likely + // to occur. + + for (i = 1; i <= F; i++) + { + InsertNode((short int) (r - i)); + } + + // Finally, insert the whole string just read. The + // member variables match_length and match_position are set. + + InsertNode(r); + + // Now that we're preloaded, continue till done. + + do + { + + // m_match_length may be spuriously long near the end of + // text. + + if (m_match_length > len) + { + m_match_length = len; + } + + // Is it cheaper to store this as a single character? If so, + // make it so. + + if (m_match_length < THRESHOLD) + { + // Send one character. Remember that code_buf[0] is the + // set of flags for the next eight items. + + m_match_length = 1; + code_buf[0] |= mask; + code_buf[code_buf_pos++] = m_ring_buffer[r]; + } + + // Otherwise, we do indeed have a string that can be stored + // compressed to save space. + + else + { + // The next 16 bits need to contain the position (12 bits) + // and the length (4 bits). + + code_buf[code_buf_pos++] = (unsigned char) m_match_position; + code_buf[code_buf_pos++] = (unsigned char) ( + ((m_match_position >> 4) & 0xf0) | + (m_match_length - THRESHOLD) ); + } + + // Shift the mask one bit to the left so that it will be ready + // to store the new bit. + + mask = (unsigned char) (mask << 1); + + // If the mask is now 0, then we know that we have a full set + // of flags and items in the code buffer. These need to be + // output. + + if (mask == 0) + { + // code_buf is the buffer of characters to be output. + // code_buf_pos is the number of characters it contains. + + SendChars(code_buf, code_buf_pos); + + // Reset for next buffer... + + code_buf[0] = 0; + code_buf_pos = 1; + mask = 1; + } + + last_match_length = m_match_length; + + // Delete old strings and read new bytes... + + for (i = 0; i < last_match_length; i++) + { + + // Get next character... + + if (GetChars(&c, 1) != 1) + break; + + // Delete "old strings" + + DeleteNode(s); + + // Put this character into the ring buffer. + // + // The original comment here says "If the position is near + // the end of the buffer, extend the buffer to make + // string comparison easier." + // + // That's a little misleading, because the "end" of the + // buffer is really what we consider to be the "beginning" + // of the buffer, that is, positions 0 through F. + // + // The idea is that the front end of the buffer is duplicated + // into the back end so that when you're looking at characters + // at the back end of the buffer, you can index ahead (beyond + // the normal end of the buffer) and see the characters + // that are at the front end of the buffer wihtout having + // to adjust the index. + // + // That is... + // + // 1234xxxxxxxxxxxxxxxxxxxxxxxxxxxxx1234 + // | | | + // position 0 end of buffer | + // | + // duplicate of front of buffer + + m_ring_buffer[s] = c; + + if (s < F - 1) + { + m_ring_buffer[s + N] = c; + } + + // Increment the position, and wrap around when we're at + // the end. Note that this relies on N being a power of 2. + + s = (short int) ( (s + 1) & (N - 1) ); + r = (short int) ( (r + 1) & (N - 1) ); + + // Register the string that is found in + // m_ring_buffer[r..r+F-1]. + + InsertNode(r); + } + + // If we didn't quit because we hit the last_match_length, + // then we must have quit because we ran out of characters + // to process. + + while (i++ < last_match_length) + { + DeleteNode(s); + + s = (short int) ( (s + 1) & (N - 1) ); + r = (short int) ( (r + 1) & (N - 1) ); + + // Note that len hitting 0 is the key that causes the + // do...while() to terminate. This is the only place + // within the loop that len is modified. + // + // Its original value is F (or a number less than F for + // short strings). + + if (--len) + { + InsertNode(r); /* buffer may not be empty. */ + } + } + + // End of do...while() loop. Continue processing until there + // are no more characters to be compressed. The variable + // "len" is used to signal this condition. + } + while (len > 0); + + // There could still be something in the output buffer. Send it + // now. + + if (code_buf_pos > 1) + { + // code_buf is the encoded string to send. + // code_buf_ptr is the number of characters. + + SendChars(code_buf, code_buf_pos); + } + + // Done! + } + +/* + ------------------------------------------------------------------------- + cLZSS::Decode + + This function "decodes" the input stream into the output stream. + The GetChars() and SendChars() functions are used to separate + this method from the actual i/o. + ------------------------------------------------------------------------- +*/ + +void cLZSS::Decode( // no return value + void) // no parameters + + { + int k; + int r; // node number + unsigned char c[F]; // an array of chars + unsigned char flags; // 8 bits of flags + int flag_count; // which flag we're on + short int pos; // position in the ring buffer + short int len; // number of chars in ring buffer + + // Initialize the ring buffer with a common string. + // + // Note that the last F bytes of the ring buffer are not filled. + + memset(m_ring_buffer, ' ', N - F); + + r = N - F; + + flags = (char) 0; + flag_count = 0; + + for ( ; ; ) + { + + // If there are more bits of interest in this flag, then + // shift that next interesting bit into the 1's position. + // + // If this flag has been exhausted, the next byte must + // be a flag. + + if (flag_count > 0) + { + flags = (unsigned char) (flags >> 1); + flag_count--; + } + else + { + // Next byte must be a flag. + + if (GetChars(&flags, 1) != 1) + break; + + // Set the flag counter. While at first it might appear + // that this should be an 8 since there are 8 bits in the + // flag, it should really be a 7 because the shift must + // be performed 7 times in order to see all 8 bits. + + flag_count = 7; + } + + // If the low order bit of the flag is now set, then we know + // that the next byte is a single, unencoded character. + + if (flags & 1) + { + if (GetChars(c, 1) != 1) + break; + + if (SendChars(c, 1) != 1) + break; + + // Add to buffer, and increment to next spot. Wrap at end. + + m_ring_buffer[r] = c[0]; + r = (short int) ( (r + 1) & (N - 1) ); + } + + // Otherwise, we know that the next two bytes are a + // <position,length> pair. The position is in 12 bits and + // the length is in 4 bits. + + else + { + // Original code: + // if ((i = getc(infile)) == EOF) + // break; + // if ((j = getc(infile)) == EOF) + // break; + // i |= ((j & 0xf0) << 4); + // j = (j & 0x0f) + THRESHOLD; + // + // I've modified this to only make one input call, and + // have changed the variable names to something more + // obvious. + + if (GetChars(c, 2) != 2) + break; + + // Convert these two characters into the position and + // length. Note that the length is always at least + // THRESHOLD, which is why we're able to get a length + // of 18 out of only 4 bits. + + pos = (short int) ( c[0] | ((c[1] & 0xf0) << 4) ); + + len = (short int) ( (c[1] & 0x0f) + THRESHOLD ); + + // There are now "len" characters at position "pos" in + // the ring buffer that can be pulled out. Note that + // len is never more than F. + + for (k = 0; k < len; k++) + { + c[k] = m_ring_buffer[(pos + k) & (N - 1)]; + + // Add to buffer, and increment to next spot. Wrap at end. + + m_ring_buffer[r] = c[k]; + r = (short int) ( (r + 1) & (N - 1) ); + } + + // Add the "len" characters to the output stream. + + if (SendChars(c, len) != len) + break; + } + } + } + |