diff options
Diffstat (limited to 'tools')
46 files changed, 8730 insertions, 0 deletions
diff --git a/tools/doc/Doxyfile b/tools/doc/Doxyfile new file mode 100644 index 0000000..a7b5793 --- /dev/null +++ b/tools/doc/Doxyfile @@ -0,0 +1,1790 @@ +# Doxyfile 1.7.5.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need +# to put quotes around the project name if it contains spaces. + +PROJECT_NAME = Utracopier + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = _PROJECT_NUMBER_ + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer +# a quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = "Tools to do advanced file copy" + +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# Doxygen will copy the logo to the output directory. + +PROJECT_LOGO = /root/ultracopier/doc/ultracopier-logo.png + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = TEMP_PATH/doc/tmp + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = YES + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful if your file system +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also makes the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or +# section (for LaTeX and RTF). + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields will be shown inline in the documentation +# of the scope in which they are defined (i.e. file, namespace, or group +# documentation), provided this scope is documented. If set to NO (the default), +# structs, classes, and unions are shown on a separate page (for HTML and Man +# pages) or section (for LaTeX and RTF). + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penalty. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will roughly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespaces are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# will still accept a match between prototype and implementation in such cases. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or macro consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and macros in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command <command> <input-file>, where <command> is the value of +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. The create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_NO_PARAMDOC option can be enabled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = ULTRACOPIERSOURCESPATH \ +ULTRACOPIERSOURCESPATH + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh +# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py +# *.f90 *.f *.for *.vhd *.vhdl + +FILE_PATTERNS = *.c \ + *.cc \ + *.cxx \ + *.cpp \ + *.c++ \ + *.d \ + *.java \ + *.ii \ + *.ixx \ + *.ipp \ + *.i++ \ + *.inl \ + *.h \ + *.hh \ + *.hxx \ + *.hpp \ + *.h++ \ + *.idl \ + *.odl \ + *.cs \ + *.php \ + *.php3 \ + *.inc \ + *.m \ + *.mm \ + *.dox \ + *.py \ + *.f90 \ + *.f \ + *.for \ + *.vhd \ + *.vhdl + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to directory from which doxygen is run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = xz_* xz.h + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty or if +# non of the patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when +# FILTER_SOURCE_FILES is enabled. + +FILTER_SOURCE_PATTERNS = + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is adviced to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when +# changing the value of configuration settings such as GENERATE_TREEVIEW! + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = footer.html + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# the files will be copied as-is; there are no commands or markers available. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the stylesheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = YES + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> +# Qt Help Project / Custom Filters</a>. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> +# Qt Help Project / Filter Attributes</a>. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum +# values from appearing in the overview section. + +ENUM_VALUES_PER_LINE = 4 + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax +# (see http://www.mathjax.org) which uses client side Javascript for the +# rendering instead of using prerendered bitmaps. Use this if you do not +# have LaTeX installed or if you want to formulas look prettier in the HTML +# output. When enabled you also need to install MathJax separately and +# configure the path to it using the MATHJAX_RELPATH option. + +USE_MATHJAX = NO + +# When MathJax is enabled you need to specify the location relative to the +# HTML output directory using the MATHJAX_RELPATH option. The destination +# directory should contain the MathJax.js script. For instance, if the mathjax +# directory is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the +# mathjax.org site, so you can quickly see the result without installing +# MathJax, but it is strongly recommended to install a local copy of MathJax +# before deployment. + +MATHJAX_RELPATH = http://www.mathjax.org/mathjax + +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# names that should be enabled during MathJax rendering. + +MATHJAX_EXTENSIONS = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = NO + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvantages are that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a +# standard footer. Notice: only use this tag if you know what you are doing! + +LATEX_FOOTER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# http://en.wikipedia.org/wiki/BibTeX for more info. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# pointed to by INCLUDE_PATH will be searched when a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition that +# overrules the definition found in the source code. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a +# semicolon, because these will confuse the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option also works with HAVE_DOT disabled, but it is recommended to +# install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# set the path where dot can find it. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will generate a graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible in IE 9+ (other browsers do not have this requirement). + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible. Older versions of IE do not have SVG support. + +INTERACTIVE_SVG = NO + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the +# \mscfile command). + +MSCFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/tools/doc/Doxyfile-plugin-template b/tools/doc/Doxyfile-plugin-template new file mode 100644 index 0000000..99fcccd --- /dev/null +++ b/tools/doc/Doxyfile-plugin-template @@ -0,0 +1,1789 @@ +# Doxyfile 1.7.5.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need +# to put quotes around the project name if it contains spaces. + +PROJECT_NAME = "_ULTRACOPIER_PLUGIN_NAME_" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = _PROJECT_NUMBER_ + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer +# a quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = "_PROJECT_BRIEF_" + +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# Doxygen will copy the logo to the output directory. + +PROJECT_LOGO = /root/ultracopier/doc/ultracopier-logo.png + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = TEMP_PATH/doc/tmp + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = YES + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful if your file system +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also makes the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or +# section (for LaTeX and RTF). + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields will be shown inline in the documentation +# of the scope in which they are defined (i.e. file, namespace, or group +# documentation), provided this scope is documented. If set to NO (the default), +# structs, classes, and unions are shown on a separate page (for HTML and Man +# pages) or section (for LaTeX and RTF). + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penalty. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will roughly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespaces are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# will still accept a match between prototype and implementation in such cases. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or macro consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and macros in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command <command> <input-file>, where <command> is the value of +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. The create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_NO_PARAMDOC option can be enabled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = ./ + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh +# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py +# *.f90 *.f *.for *.vhd *.vhdl + +FILE_PATTERNS = *.c \ + *.cc \ + *.cxx \ + *.cpp \ + *.c++ \ + *.d \ + *.java \ + *.ii \ + *.ixx \ + *.ipp \ + *.i++ \ + *.inl \ + *.h \ + *.hh \ + *.hxx \ + *.hpp \ + *.h++ \ + *.idl \ + *.odl \ + *.cs \ + *.php \ + *.php3 \ + *.inc \ + *.m \ + *.mm \ + *.dox \ + *.py \ + *.f90 \ + *.f \ + *.for \ + *.vhd \ + *.vhdl + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to directory from which doxygen is run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = interface/* + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty or if +# non of the patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when +# FILTER_SOURCE_FILES is enabled. + +FILTER_SOURCE_PATTERNS = + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is adviced to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when +# changing the value of configuration settings such as GENERATE_TREEVIEW! + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = footer.html + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# the files will be copied as-is; there are no commands or markers available. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the stylesheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = YES + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> +# Qt Help Project / Custom Filters</a>. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> +# Qt Help Project / Filter Attributes</a>. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum +# values from appearing in the overview section. + +ENUM_VALUES_PER_LINE = 4 + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax +# (see http://www.mathjax.org) which uses client side Javascript for the +# rendering instead of using prerendered bitmaps. Use this if you do not +# have LaTeX installed or if you want to formulas look prettier in the HTML +# output. When enabled you also need to install MathJax separately and +# configure the path to it using the MATHJAX_RELPATH option. + +USE_MATHJAX = NO + +# When MathJax is enabled you need to specify the location relative to the +# HTML output directory using the MATHJAX_RELPATH option. The destination +# directory should contain the MathJax.js script. For instance, if the mathjax +# directory is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the +# mathjax.org site, so you can quickly see the result without installing +# MathJax, but it is strongly recommended to install a local copy of MathJax +# before deployment. + +MATHJAX_RELPATH = http://www.mathjax.org/mathjax + +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# names that should be enabled during MathJax rendering. + +MATHJAX_EXTENSIONS = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = NO + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvantages are that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a +# standard footer. Notice: only use this tag if you know what you are doing! + +LATEX_FOOTER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# http://en.wikipedia.org/wiki/BibTeX for more info. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# pointed to by INCLUDE_PATH will be searched when a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition that +# overrules the definition found in the source code. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a +# semicolon, because these will confuse the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option also works with HAVE_DOT disabled, but it is recommended to +# install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# set the path where dot can find it. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will generate a graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible in IE 9+ (other browsers do not have this requirement). + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible. Older versions of IE do not have SVG support. + +INTERACTIVE_SVG = NO + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the +# \mscfile command). + +MSCFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/tools/doc/footer.html b/tools/doc/footer.html new file mode 100644 index 0000000..88105a5 --- /dev/null +++ b/tools/doc/footer.html @@ -0,0 +1,2 @@ +<hr class="footer"/> + diff --git a/tools/doc/ultracopier-logo.png b/tools/doc/ultracopier-logo.png Binary files differnew file mode 100644 index 0000000..31dcdea --- /dev/null +++ b/tools/doc/ultracopier-logo.png diff --git a/tools/scripts/UltraCP b/tools/scripts/UltraCP new file mode 100644 index 0000000..7dc6885 --- /dev/null +++ b/tools/scripts/UltraCP @@ -0,0 +1,28 @@ +#!/bin/bash +""" +Type: Nautilus Script +Title: UltraCP +Version: 1.0 +Info: copie des fichiers ou répertoires sélectionnés avec UltraCopier. + copy selected files and directories with UltraCopier. +Author: © Copyright (C) 2013, Airelle - http://rlwpx.free.fr/WPFF/nautilus.htm +License: GNU General Public License, version 3 or later - http://www.gnu.org/licenses/gpl.html +Usage : copier ce fichier dans le répertoire des scripts Nautilus de votre dossier personnel + (~/.gnome2/nautilus-scripts/) et vérifier que le script est exécutable (x). + Ultracopier doit être installé (http://ultracopier.first-world.info/) + copy this file to the directory of Nautilus-scripts of your home + (~/.gnome2/nautilus-scripts/) and be sure that the script is executable (x). + Ultracopier must be installed (http://ultracopier.first-world.info/) +""" + +IFS=' +' + +vers=`zenity --file-selection --directory --title="Vers..." --filename="/home/media/" --text="Choisir le dossier de destination"` + +for file in $NAUTILUS_SCRIPT_SELECTED_FILE_PATHS ; +do + ultracopier cp "${file}" ${vers} +done + +# EOF diff --git a/tools/scripts/UltraMV b/tools/scripts/UltraMV new file mode 100644 index 0000000..37ced70 --- /dev/null +++ b/tools/scripts/UltraMV @@ -0,0 +1,28 @@ +#!/bin/bash +""" +Type: Nautilus Script +Title: UltraMV +Version: 1.0 +Info: déplace des fichiers ou répertoires sélectionnés avec UltraCopier. + move selected files and directories with UltraCopier. +Author: © Copyright (C) 2013, Airelle - http://rlwpx.free.fr/WPFF/nautilus.htm +License: GNU General Public License, version 3 or later - http://www.gnu.org/licenses/gpl.html +Usage : copier ce fichier dans le répertoire des scripts Nautilus de votre dossier personnel + (~/.gnome2/nautilus-scripts/) et vérifier que le script est exécutable (x). + Ultracopier doit être installé (http://ultracopier.first-world.info/) + copy this file to the directory of Nautilus-scripts of your home + (~/.gnome2/nautilus-scripts/) and be sure that the script is executable (x). + Ultracopier must be installed (http://ultracopier.first-world.info/) +""" + +IFS=' +' + +vers=`zenity --file-selection --directory --title="Vers..." --filename="/home/media/" --text="Choisir le dossier de destination"` + +for file in $NAUTILUS_SCRIPT_SELECTED_FILE_PATHS ; +do + ultracopier mv "${file}" ${vers} +done + +# EOF diff --git a/tools/to-pack/1-pre-send.sh b/tools/to-pack/1-pre-send.sh new file mode 100755 index 0000000..960edf2 --- /dev/null +++ b/tools/to-pack/1-pre-send.sh @@ -0,0 +1,55 @@ +#!/bin/bash + +export TEMP_PATH="/home/ultracopier-temp/" +export WINEBASEPATH="/home/wine/" +export ULTRACOPIERSOURCESPATH="/root/ultracopier/sources/" +export BASE_PWD=`pwd` + +rm -Rf ${TEMP_PATH} > /dev/null 2>&1 +rm -Rf ${ULTRACOPIERSOURCESPATH}/plugins-alternative/CopyEngine/Ultracopier/ > /dev/null 2>&1 +mkdir -p ${TEMP_PATH} +cd ../ +find ./ -name "Thumbs.db" -exec rm {} \; >> /dev/null 2>&1 +find ./ -name ".directory" -exec rm {} \; >> /dev/null 2>&1 + +cd ${BASE_PWD} + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIERSOURCESPATH}/Variable.h | grep -F "1.4" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +echo "Update the translation..." +source sub-script/translation.sh +cd ${BASE_PWD} +echo "Update the translation... done" + +echo "Assemble source version..." +source sub-script/assemble-source-version.sh +cd ${BASE_PWD} +echo "Assemble source version... done" + +#echo "Assemble doc version..." +#source sub-script/doc.sh +#cd ${BASE_PWD} +#echo "Assemble doc version... done" + + + diff --git a/tools/to-pack/1-update-translation.sh b/tools/to-pack/1-update-translation.sh new file mode 100755 index 0000000..daf8263 --- /dev/null +++ b/tools/to-pack/1-update-translation.sh @@ -0,0 +1,37 @@ +#!/bin/bash + +export TEMP_PATH="/mnt/world/ultracopier-temp/" +export ULTRACOPIER_SOURCE="/home/user/Desktop/ultracopier/sources/" +export BASE_PWD=`pwd` + +cd ${BASE_PWD} + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIER_SOURCE}/Variable.h | grep -F "1.2" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +echo "Update translation..." +source sub-script/translation-local.sh +cd ${BASE_PWD} +echo "Update translation... done" + + + diff --git a/tools/to-pack/2-compil-wine32.sh b/tools/to-pack/2-compil-wine32.sh new file mode 100755 index 0000000..dad795b --- /dev/null +++ b/tools/to-pack/2-compil-wine32.sh @@ -0,0 +1,39 @@ +#!/bin/bash + +export TEMP_PATH="/home/ultracopier-temp/" +export WINEBASEPATH="/home/wine/" +export PATH=/home/mxe/usr/bin:$PATH +export ULTRACOPIERSOURCESPATH="/root/ultracopier/sources/" +export BASE_PWD=`pwd` + +cd ${BASE_PWD} + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIERSOURCESPATH}/Variable.h | grep -F "1." | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +echo "Compil windows version..." +source sub-script/compil-windows32.sh +cd ${BASE_PWD} +echo "Compil windows version... done" + + + diff --git a/tools/to-pack/2-compil-wine64.sh b/tools/to-pack/2-compil-wine64.sh new file mode 100755 index 0000000..536f343 --- /dev/null +++ b/tools/to-pack/2-compil-wine64.sh @@ -0,0 +1,38 @@ + +#!/bin/bash +export TEMP_PATH="/home/ultracopier-temp/" +export WINEBASEPATH="/home/wine/" +export ULTRACOPIERSOURCESPATH="/root/ultracopier/sources/" +export BASE_PWD=`pwd` + +cd ${BASE_PWD} + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIERSOURCESPATH}/Variable.h | grep -F "1.4" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +echo "Compil windows version..." +source sub-script/compil-windows64.sh +cd ${BASE_PWD} +echo "Compil windows version... done" + + + diff --git a/tools/to-pack/2-send-sources.sh b/tools/to-pack/2-send-sources.sh new file mode 100755 index 0000000..1daced1 --- /dev/null +++ b/tools/to-pack/2-send-sources.sh @@ -0,0 +1,12 @@ +#!/bin/bash + +cd ../../ +find ./ -name "Thumbs.db" -exec rm {} \; >> /dev/null 2>&1 +find ./ -name ".directory" -exec rm {} \; >> /dev/null 2>&1 + +echo "Send sources..." +/usr/bin/rsync -avrtz --compress-level=9 --rsh='ssh -p54973' --delete --partial --progress /home/user/Desktop/ultracopier/sources/ root@ssh.first-world.info:/root/ultracopier/sources/ --exclude='*build*' --exclude='*Qt_5*' --exclude='*qt5*' --exclude='*.pro.user' --exclude='*.qm' +echo "Send sources... done" + + + diff --git a/tools/to-pack/3-compil-mac.sh b/tools/to-pack/3-compil-mac.sh new file mode 100755 index 0000000..21fa8bf --- /dev/null +++ b/tools/to-pack/3-compil-mac.sh @@ -0,0 +1,37 @@ +#!/bin/bash + +export TEMP_PATH="/mnt/world/ultracopier-temp/" +export ULTRACOPIER_SOURCE="/home/user/Desktop/ultracopier/sources/" +export BASE_PWD=`pwd` + +cd ${BASE_PWD} + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIER_SOURCE}/Variable.h | grep -F "1.2" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +echo "Assemble mac version..." +source sub-script/mac.sh +cd ${BASE_PWD} +echo "Assemble mac version... done" + + + diff --git a/tools/to-pack/4-clean-all.sh b/tools/to-pack/4-clean-all.sh new file mode 100755 index 0000000..40770b6 --- /dev/null +++ b/tools/to-pack/4-clean-all.sh @@ -0,0 +1,35 @@ +#!/bin/bash + +export TEMP_PATH="/home/ultracopier-temp/" +export WINEBASEPATH="/home/wine/" +export ULTRACOPIERSOURCESPATH="/root/ultracopier/sources/" +export BASE_PWD=`pwd` + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIERSOURCESPATH}/Variable.h | grep -F "1.4" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +echo "Clean the temp folder..." +source sub-script/clean-all.sh +cd ${BASE_PWD} +echo "Clean the temp folder... done" + + diff --git a/tools/to-pack/4-upload.sh b/tools/to-pack/4-upload.sh new file mode 100755 index 0000000..d908ddd --- /dev/null +++ b/tools/to-pack/4-upload.sh @@ -0,0 +1,38 @@ +#!/bin/bash + +export TEMP_PATH="/mnt/world/ultracopier-temp/" +export ULTRACOPIER_SOURCE="/home/user/Desktop/ultracopier/sources/" +export BASE_PWD=`pwd` + +cd ${BASE_PWD} + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIER_SOURCE}/Variable.h | grep -F "1.2" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +echo "Upload version..." +source sub-script/upload-local.sh +cd ${BASE_PWD} +echo "Upload version... done" + + + + diff --git a/tools/to-pack/5-upload.sh b/tools/to-pack/5-upload.sh new file mode 100755 index 0000000..0cf5021 --- /dev/null +++ b/tools/to-pack/5-upload.sh @@ -0,0 +1,35 @@ +#!/bin/bash + +export TEMP_PATH="/home/ultracopier-temp/" +export WINEBASEPATH="/home/wine/" +export ULTRACOPIERSOURCESPATH="/root/ultracopier/sources/" +export BASE_PWD=`pwd` + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIERSOURCESPATH}/Variable.h | grep -F "1.4" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +echo "upload..." +source sub-script/upload.sh +cd ${BASE_PWD} +echo "upload... done" + + diff --git a/tools/to-pack/6-sendmail.sh b/tools/to-pack/6-sendmail.sh new file mode 100755 index 0000000..0dc32c8 --- /dev/null +++ b/tools/to-pack/6-sendmail.sh @@ -0,0 +1,35 @@ +#!/bin/bash + +export TEMP_PATH="/home/ultracopier-temp/" +export WINEBASEPATH="/home/wine/" +export ULTRACOPIERSOURCESPATH="/root/ultracopier/sources/" +export BASE_PWD=`pwd` + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIERSOURCESPATH}/Variable.h | grep -F "1.4" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +echo "upload..." +source sub-script/sendmail.sh +cd ${BASE_PWD} +echo "upload... done" + + diff --git a/tools/to-pack/data/windows/install-static.nsi b/tools/to-pack/data/windows/install-static.nsi new file mode 100755 index 0000000..0bfc57d --- /dev/null +++ b/tools/to-pack/data/windows/install-static.nsi @@ -0,0 +1,162 @@ +!include Library.nsh
+!define LIBRARY_X64
+!define LIBRARY_SHELL_EXTENSION
+!define LIBRARY_COM
+
+; HM NIS Edit Wizard helper defines
+!define PRODUCT_NAME "Ultracopier"
+!define PRODUCT_VERSION "X.X.X.X"
+!define PRODUCT_PUBLISHER "Ultracopier"
+!define PRODUCT_WEB_SITE "http://ultracopier.first-world.info/"
+!define PRODUCT_DIR_REGKEY "Software\Microsoft\Windows\CurrentVersion\App Paths\ultracopier.exe"
+!define PRODUCT_UNINST_KEY "Software\Microsoft\Windows\CurrentVersion\Uninstall\${PRODUCT_NAME}"
+!define PRODUCT_UNINST_ROOT_KEY "HKLM"
+
+RequestExecutionLevel admin
+
+SetCompressor /FINAL /SOLID lzma
+
+; MUI 1.67 compatible ------
+!include "MUI.nsh"
+
+; MUI Settings
+!define MUI_ABORTWARNING
+!define MUI_ICON "${NSISDIR}\Contrib\Graphics\Icons\modern-install.ico"
+!define MUI_UNICON "${NSISDIR}\Contrib\Graphics\Icons\modern-uninstall.ico"
+
+; Welcome page
+!insertmacro MUI_PAGE_WELCOME
+; License page
+; !insertmacro MUI_PAGE_LICENSE "COPYING.txt"
+; Directory page
+!insertmacro MUI_PAGE_DIRECTORY
+; Instfiles page
+!insertmacro MUI_PAGE_INSTFILES
+; Finish page
+!define MUI_FINISHPAGE_RUN "$INSTDIR\ultracopier.exe"
+!insertmacro MUI_PAGE_FINISH
+
+; Uninstaller pages
+!insertmacro MUI_UNPAGE_INSTFILES
+
+; Language files
+!insertmacro MUI_LANGUAGE "English"
+
+; Reserve files
+!insertmacro MUI_RESERVEFILE_INSTALLOPTIONS
+
+; MUI end ------
+
+Name "${PRODUCT_NAME} ${PRODUCT_VERSION}"
+OutFile "setup.exe"
+InstallDir "$PROGRAMFILES\Ultracopier"
+InstallDirRegKey HKLM "${PRODUCT_DIR_REGKEY}" ""
+ShowInstDetails show
+ShowUnInstDetails show
+
+Section "SectionPrincipale" SEC01
+ SetOutPath "$INSTDIR"
+ SetOverwrite on
+ File "ultracopier.exe"
+ CreateDirectory "$SMPROGRAMS\Ultracopier"
+ CreateShortCut "$SMPROGRAMS\Ultracopier\Ultracopier.lnk" "$INSTDIR\ultracopier.exe"
+ File /r /x *.nsi /x setup.exe *
+ !insertmacro InstallLib REGDLL NOTSHARED NOREBOOT_PROTECTED catchcopy32.dll $INSTDIR\catchcopy32.dll $INSTDIR
+ !insertmacro InstallLib REGDLL NOTSHARED NOREBOOT_PROTECTED catchcopy64.dll $INSTDIR\catchcopy64.dll $INSTDIR
+SectionEnd
+
+Section -AdditionalIcons
+ CreateShortCut "$SMPROGRAMS\Ultracopier\Uninstall.lnk" "$INSTDIR\uninst.exe"
+SectionEnd
+
+Section -Post
+ WriteUninstaller "$INSTDIR\uninst.exe"
+ WriteRegStr HKLM "${PRODUCT_DIR_REGKEY}" "" "$INSTDIR\ultracopier.exe"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "DisplayName" "$(^Name)"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "UninstallString" "$INSTDIR\uninst.exe"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "DisplayIcon" "$INSTDIR\ultracopier.exe"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "DisplayVersion" "${PRODUCT_VERSION}"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "URLInfoAbout" "${PRODUCT_WEB_SITE}"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "Publisher" "${PRODUCT_PUBLISHER}"
+SectionEnd
+
+
+Function un.onUninstFailed
+ HideWindow
+ MessageBox MB_ICONINFORMATION|MB_OK "To remove $(^Name) from the computer, close the application and remove manualy the folder"
+FunctionEnd
+
+Function un.onUninstSuccess
+ HideWindow
+ MessageBox MB_ICONINFORMATION|MB_OK "$(^Name) have been uninstall from the computer."
+FunctionEnd
+
+Function un.onInit
+ MessageBox MB_ICONQUESTION|MB_YESNO|MB_DEFBUTTON2 "Are you sure you want to completely uninstall $(^Name) and all of its components?" IDYES +2
+ Abort
+FunctionEnd
+
+Function .onInit
+
+ ReadRegStr $R0 HKLM \
+ "Software\Microsoft\Windows\CurrentVersion\Uninstall\${PRODUCT_NAME}" \
+ "UninstallString"
+ StrCmp $R0 "" done
+
+ MessageBox MB_OKCANCEL|MB_ICONEXCLAMATION \
+ "${PRODUCT_NAME} is already installed. $\n$\nClick `OK` to remove the \
+ previous version or `Cancel` to cancel this upgrade." \
+ IDOK uninst
+ Abort
+
+;Run the uninstaller
+uninst:
+ ClearErrors
+ ExecWait '$R0 _?=$INSTDIR' ;Do not copy the uninstaller to a temp file
+
+ IfErrors no_remove_uninstaller done
+ ;You can either use Delete /REBOOTOK in the uninstaller or add some code
+ ;here to remove the uninstaller. Use a registry key to check
+ ;whether the user has chosen to uninstall. If you are using an uninstaller
+ ;components page, make sure all sections are uninstalled.
+ no_remove_uninstaller:
+
+done:
+
+FunctionEnd
+
+Section Uninstall
+ IfFileExists "$INSTDIR\ultracopier.exe" CloseProgram
+ Abort "The original application $INSTDIR\ultracopier.exe is not found"
+ Goto NotLaunched
+ CloseProgram:
+ ExecWait '"$INSTDIR\ultracopier.exe" quit' $0
+ IntCmp $0 0 NotLaunched
+ DetailPrint "Waiting Close..."
+ CloseLoop:
+ Sleep 200
+ ExecWait '"$INSTDIR\ultracopier.exe" quit' $0
+ IntCmp $0 0 NotLaunched
+ Goto CloseLoop
+
+ NotLaunched:
+
+ ExecWait 'regsvr32 /s /u "$INSTDIR\catchcopy32.dll"'
+ ExecWait 'regsvr32 /s /u "$INSTDIR\catchcopy64.dll"'
+
+; DeleteRegKey HKCU "Software\Ultracopier"
+; DeleteRegValue HKCU "Software\Microsoft\Windows\CurrentVersion\Run" "ultracopier"
+ Delete "$SMPROGRAMS\Ultracopier\Uninstall.lnk"
+ Delete "$SMPROGRAMS\Ultracopier\Ultracopier.lnk"
+
+ Delete /REBOOTOK $SMPROGRAMS\catchcopy32.dll
+ Delete /REBOOTOK $SMPROGRAMS\catchcopy64.dll
+ Delete /REBOOTOK $INSTDIR\catchcopy32.dll
+ Delete /REBOOTOK $INSTDIR\catchcopy64.dll
+ RMDir /REBOOTOK /r "$SMPROGRAMS\Ultracopier"
+ RMDir /REBOOTOK /r "$INSTDIR"
+
+ DeleteRegKey ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}"
+ DeleteRegKey HKLM "${PRODUCT_DIR_REGKEY}"
+ SetAutoClose true
+SectionEnd
diff --git a/tools/to-pack/data/windows/install.nsi b/tools/to-pack/data/windows/install.nsi new file mode 100755 index 0000000..376f762 --- /dev/null +++ b/tools/to-pack/data/windows/install.nsi @@ -0,0 +1,162 @@ +!include Library.nsh
+!define LIBRARY_X64
+!define LIBRARY_SHELL_EXTENSION
+!define LIBRARY_COM
+
+; HM NIS Edit Wizard helper defines
+!define PRODUCT_NAME "Ultracopier"
+!define PRODUCT_VERSION "X.X.X.X"
+!define PRODUCT_PUBLISHER "Ultracopier"
+!define PRODUCT_WEB_SITE "http://ultracopier.first-world.info/"
+!define PRODUCT_DIR_REGKEY "Software\Microsoft\Windows\CurrentVersion\App Paths\ultracopier.exe"
+!define PRODUCT_UNINST_KEY "Software\Microsoft\Windows\CurrentVersion\Uninstall\${PRODUCT_NAME}"
+!define PRODUCT_UNINST_ROOT_KEY "HKLM"
+
+RequestExecutionLevel admin
+
+SetCompressor /FINAL /SOLID lzma
+
+; MUI 1.67 compatible ------
+!include "MUI.nsh"
+
+; MUI Settings
+!define MUI_ABORTWARNING
+!define MUI_ICON "${NSISDIR}\Contrib\Graphics\Icons\modern-install.ico"
+!define MUI_UNICON "${NSISDIR}\Contrib\Graphics\Icons\modern-uninstall.ico"
+
+; Welcome page
+!insertmacro MUI_PAGE_WELCOME
+; License page
+; !insertmacro MUI_PAGE_LICENSE "COPYING.txt"
+; Directory page
+!insertmacro MUI_PAGE_DIRECTORY
+; Instfiles page
+!insertmacro MUI_PAGE_INSTFILES
+; Finish page
+!define MUI_FINISHPAGE_RUN "$INSTDIR\ultracopier.exe"
+!insertmacro MUI_PAGE_FINISH
+
+; Uninstaller pages
+!insertmacro MUI_UNPAGE_INSTFILES
+
+; Language files
+!insertmacro MUI_LANGUAGE "English"
+
+; Reserve files
+!insertmacro MUI_RESERVEFILE_INSTALLOPTIONS
+
+; MUI end ------
+
+Name "${PRODUCT_NAME} ${PRODUCT_VERSION}"
+OutFile "setup.exe"
+InstallDir "$PROGRAMFILES\Ultracopier"
+InstallDirRegKey HKLM "${PRODUCT_DIR_REGKEY}" ""
+ShowInstDetails show
+ShowUnInstDetails show
+
+Section "SectionPrincipale" SEC01
+ SetOutPath "$INSTDIR"
+ SetOverwrite on
+ File "ultracopier.exe"
+ CreateDirectory "$SMPROGRAMS\Ultracopier"
+ CreateShortCut "$SMPROGRAMS\Ultracopier\Ultracopier.lnk" "$INSTDIR\ultracopier.exe"
+ File /r /x *.nsi /x setup.exe *
+ !insertmacro InstallLib REGDLL NOTSHARED NOREBOOT_PROTECTED PluginLoader\catchcopy-v0002\catchcopy32.dll $INSTDIR\PluginLoader\catchcopy-v0002\catchcopy32.dll $INSTDIR
+ !insertmacro InstallLib REGDLL NOTSHARED NOREBOOT_PROTECTED PluginLoader\catchcopy-v0002\catchcopy64.dll $INSTDIR\PluginLoader\catchcopy-v0002\catchcopy64.dll $INSTDIR
+SectionEnd
+
+Section -AdditionalIcons
+ CreateShortCut "$SMPROGRAMS\Ultracopier\Uninstall.lnk" "$INSTDIR\uninst.exe"
+SectionEnd
+
+Section -Post
+ WriteUninstaller "$INSTDIR\uninst.exe"
+ WriteRegStr HKLM "${PRODUCT_DIR_REGKEY}" "" "$INSTDIR\ultracopier.exe"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "DisplayName" "$(^Name)"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "UninstallString" "$INSTDIR\uninst.exe"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "DisplayIcon" "$INSTDIR\ultracopier.exe"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "DisplayVersion" "${PRODUCT_VERSION}"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "URLInfoAbout" "${PRODUCT_WEB_SITE}"
+ WriteRegStr ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}" "Publisher" "${PRODUCT_PUBLISHER}"
+SectionEnd
+
+
+Function un.onUninstFailed
+ HideWindow
+ MessageBox MB_ICONINFORMATION|MB_OK "To remove $(^Name) from the computer, close the application and remove manualy the folder"
+FunctionEnd
+
+Function un.onUninstSuccess
+ HideWindow
+ MessageBox MB_ICONINFORMATION|MB_OK "$(^Name) have been uninstall from the computer."
+FunctionEnd
+
+Function un.onInit
+ MessageBox MB_ICONQUESTION|MB_YESNO|MB_DEFBUTTON2 "Are you sure you want to completely uninstall $(^Name) and all of its components?" IDYES +2
+ Abort
+FunctionEnd
+
+Function .onInit
+
+ ReadRegStr $R0 HKLM \
+ "Software\Microsoft\Windows\CurrentVersion\Uninstall\${PRODUCT_NAME}" \
+ "UninstallString"
+ StrCmp $R0 "" done
+
+ MessageBox MB_OKCANCEL|MB_ICONEXCLAMATION \
+ "${PRODUCT_NAME} is already installed. $\n$\nClick `OK` to remove the \
+ previous version or `Cancel` to cancel this upgrade." \
+ IDOK uninst
+ Abort
+
+;Run the uninstaller
+uninst:
+ ClearErrors
+ ExecWait '$R0 _?=$INSTDIR' ;Do not copy the uninstaller to a temp file
+
+ IfErrors no_remove_uninstaller done
+ ;You can either use Delete /REBOOTOK in the uninstaller or add some code
+ ;here to remove the uninstaller. Use a registry key to check
+ ;whether the user has chosen to uninstall. If you are using an uninstaller
+ ;components page, make sure all sections are uninstalled.
+ no_remove_uninstaller:
+
+done:
+
+FunctionEnd
+
+Section Uninstall
+ IfFileExists "$INSTDIR\ultracopier.exe" CloseProgram
+ Abort "The original application $INSTDIR\ultracopier.exe is not found"
+ Goto NotLaunched
+ CloseProgram:
+ ExecWait '"$INSTDIR\ultracopier.exe" quit' $0
+ IntCmp $0 0 NotLaunched
+ DetailPrint "Waiting Close..."
+ CloseLoop:
+ Sleep 200
+ ExecWait '"$INSTDIR\ultracopier.exe" quit' $0
+ IntCmp $0 0 NotLaunched
+ Goto CloseLoop
+
+ NotLaunched:
+
+ ExecWait 'regsvr32 /s /u "$INSTDIR\PluginLoader\catchcopy-v0002\catchcopy32.dll"'
+ ExecWait 'regsvr32 /s /u "$INSTDIR\PluginLoader\catchcopy-v0002\catchcopy64.dll"'
+
+; DeleteRegKey HKCU "Software\Ultracopier"
+ DeleteRegValue HKCU "Software\Microsoft\Windows\CurrentVersion\Run" "ultracopier"
+ Delete "$SMPROGRAMS\Ultracopier\Uninstall.lnk"
+ Delete "$SMPROGRAMS\Ultracopier\Ultracopier.lnk"
+
+ Delete /REBOOTOK $SMPROGRAMS\PluginLoader\catchcopy-v0002\catchcopy32.dll
+ Delete /REBOOTOK $SMPROGRAMS\PluginLoader\catchcopy-v0002\catchcopy64.dll
+ Delete /REBOOTOK $INSTDIR\PluginLoader\catchcopy-v0002\catchcopy32.dll
+ Delete /REBOOTOK $INSTDIR\PluginLoader\catchcopy-v0002\catchcopy64.dll
+ RMDir /REBOOTOK /r "$SMPROGRAMS\Ultracopier"
+ RMDir /REBOOTOK /r "$INSTDIR"
+
+ DeleteRegKey ${PRODUCT_UNINST_ROOT_KEY} "${PRODUCT_UNINST_KEY}"
+ DeleteRegKey HKLM "${PRODUCT_DIR_REGKEY}"
+ SetAutoClose true
+SectionEnd
diff --git a/tools/to-pack/data/windows/resources-windows-ultracopier-plugins.rc b/tools/to-pack/data/windows/resources-windows-ultracopier-plugins.rc new file mode 100644 index 0000000..6a9c2fa --- /dev/null +++ b/tools/to-pack/data/windows/resources-windows-ultracopier-plugins.rc @@ -0,0 +1,27 @@ +#include <windows.h> + +1 VERSIONINFO +FILEVERSION ULTRACOPIER_PLUGIN_WINDOWS_VERSION +PRODUCTVERSION ULTRACOPIER_PLUGIN_WINDOWS_VERSION +{ + BLOCK "StringFileInfo" + { + BLOCK "040904E4" + { + VALUE "CompanyName", "ultracopier.first-world.info" + VALUE "FileVersion", "ULTRACOPIER_PLUGIN_VERSION" + VALUE "FileDescription", "ULTRACOPIER_PLUGIN_NAME for Ultracopier under GPL3" + VALUE "InternalName", "ULTRACOPIER_PLUGIN_FILENAME" + VALUE "LegalCopyright", "GPL3" + VALUE "LegalTrademarks", "ULTRACOPIER_PLUGIN_NAME for Ultracopier under GPL3" + VALUE "OriginalFilename", "ULTRACOPIER_PLUGIN_FILENAME" + VALUE "ProductName", "ULTRACOPIER_PLUGIN_NAME for Ultracopier" + VALUE "ProductVersion", "ULTRACOPIER_PLUGIN_VERSION" + } + } + BLOCK "VarFileInfo" + { + VALUE "Translation", 0x0409, 1252 + } +} + diff --git a/tools/to-pack/data/windows/ultracopier.ico b/tools/to-pack/data/windows/ultracopier.ico Binary files differnew file mode 100755 index 0000000..1a6972a --- /dev/null +++ b/tools/to-pack/data/windows/ultracopier.ico diff --git a/tools/to-pack/grouped.sh b/tools/to-pack/grouped.sh new file mode 100755 index 0000000..36936d9 --- /dev/null +++ b/tools/to-pack/grouped.sh @@ -0,0 +1,12 @@ +#!/bin/bash +export ULTRACOPIERSOURCESPATH="/root/ultracopier/sources/" +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIERSOURCESPATH}/Variable.h | grep -F "1.4" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + +./1-pre-send.sh +./2-compil-wine32.sh +#./2-compil-wine64.sh +./4-clean-all.sh +#mv /home/ultracopier-temp/ultracopier-*.* /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ +#mv /home/ultracopier-temp/supercopier-*.* /home/first-world.info/files-rw/supercopier/${ULTRACOPIER_VERSION}/ +#rsync -avrt /home/ultracopier-temp/plugins/ /home/first-world.info/files-rw/ultracopier/plugins/ +#rm -Rf /home/ultracopier-temp/plugins/ diff --git a/tools/to-pack/old-3-compil-linux.sh b/tools/to-pack/old-3-compil-linux.sh new file mode 100755 index 0000000..8796fc4 --- /dev/null +++ b/tools/to-pack/old-3-compil-linux.sh @@ -0,0 +1,37 @@ +#!/bin/bash + +export TEMP_PATH="/mnt/world/ultracopier-temp/" +export ULTRACOPIER_SOURCE="/home/user/Desktop/ultracopier/sources/" +export BASE_PWD=`pwd` + +cd ${BASE_PWD} + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIER_SOURCE}/Variable.h | grep -F "1.2" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +echo "Assemble linux version..." +source sub-script/linux.sh +cd ${BASE_PWD} +echo "Assemble linux version... done" + + + diff --git a/tools/to-pack/sub-script/assemble-source-version.sh b/tools/to-pack/sub-script/assemble-source-version.sh new file mode 100755 index 0000000..f00516e --- /dev/null +++ b/tools/to-pack/sub-script/assemble-source-version.sh @@ -0,0 +1,129 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +cd ${TEMP_PATH}/ + +FINAL_ARCHIVE="ultracopier-src-${ULTRACOPIER_VERSION}.tar.xz" +if [ ! -e ${FINAL_ARCHIVE} ]; then + rm -Rf ${TEMP_PATH}/ultracopier-src/ + cp -aRf ${ULTRACOPIERSOURCESPATH}/ ${TEMP_PATH}/ultracopier-src/ + find ${TEMP_PATH}/ultracopier-src/ -name "*.pro.user" -exec rm {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -name "*-build-desktop" -type d -exec rm -Rf {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -name "*-build-desktop*" -type d -exec rm -Rf {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -name "*Qt_in_*" -type d -exec rm -Rf {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -name "informations.xml" -exec sed -i "s/linux-x86_64-pc/windows-x86/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_DEBUG/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLE/\/\/#define ULTRACOPIER_VERSION_PORTABLE/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -iname "*.qm" -exec rm {} \; > /dev/null 2>&1 + + tar cJf ${FINAL_ARCHIVE} ultracopier-src/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar + if [ ! -e ${FINAL_ARCHIVE} ]; then + echo "${FINAL_ARCHIVE} not exists!"; + exit; + fi +fi + +if [ -d ${TEMP_PATH}/ultracopier-src/plugins/ ] +then + cd ${TEMP_PATH}/ultracopier-src/plugins/ + find ${TEMP_PATH}/ultracopier-src/plugins/ -iname "*.qm" -exec rm {} \; + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/ultracopier-src/plugins/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -d ${plugins_name} ] && [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + echo "do source package for the plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + find ${TEMP_PATH}/ultracopier-src/ -iname "*.h" -exec sed -i "s/..\/..\/..\/interface\//interface\//g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -iname "*.pro" -exec sed -i "s/..\/..\/..\/interface\//interface\//g" {} \; > /dev/null 2>&1 + rsync -art ${TEMP_PATH}/ultracopier-src/interface/ ${plugins_name}/interface/ > /dev/null 2>&1 + FILE="StructEnumDefinition.h" + if [ -e ${plugins_name}/${FILE} ] + then + rm -f ${plugins_name}/${FILE} + cp ${TEMP_PATH}/ultracopier-src/${FILE} ${plugins_name}/${FILE} + fi + FILE="CompilerInfo.h" + if [ -e ${plugins_name}/${FILE} ] + then + rm -f ${plugins_name}/${FILE} + cp ${TEMP_PATH}/ultracopier-src/${FILE} ${plugins_name}/${FILE} + fi + FILE="PlatformMacro.h" + if [ -e ${plugins_name}/${FILE} ] + then + rm -f ${plugins_name}/${FILE} + cp ${TEMP_PATH}/ultracopier-src/${FILE} ${plugins_name}/${FILE} + fi + tar -c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-src.tar.xz + fi + done + cd ${TEMP_PATH}/ultracopier-src/plugins/ + fi + done + cd ${TEMP_PATH}/ultracopier-src/plugins-alternative/ + find ${TEMP_PATH}/ultracopier-src/plugins-alternative/ -iname "*.qm" -exec rm {} \; + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/ultracopier-src/plugins-alternative/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -d ${plugins_name} ] && [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + echo "do source package for the plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + find ${TEMP_PATH}/ultracopier-src/ -iname "*.h" -exec sed -i "s/..\/..\/..\/interface\//interface\//g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/ultracopier-src/ -iname "*.pro" -exec sed -i "s/..\/..\/..\/interface\//interface\//g" {} \; > /dev/null 2>&1 + rsync -art ${TEMP_PATH}/ultracopier-src/interface/ ${plugins_name}/interface/ > /dev/null 2>&1 + FILE="StructEnumDefinition.h" + if [ -e ${plugins_name}/${FILE} ] + then + rm -f ${plugins_name}/${FILE} + cp ${TEMP_PATH}/ultracopier-src/${FILE} ${plugins_name}/${FILE} + fi + FILE="CompilerInfo.h" + if [ -e ${plugins_name}/${FILE} ] + then + rm -f ${plugins_name}/${FILE} + cp ${TEMP_PATH}/ultracopier-src/${FILE} ${plugins_name}/${FILE} + fi + FILE="PlatformMacro.h" + if [ -e ${plugins_name}/${FILE} ] + then + rm -f ${plugins_name}/${FILE} + cp ${TEMP_PATH}/ultracopier-src/${FILE} ${plugins_name}/${FILE} + fi + tar -c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-src.tar.xz + fi + done + cd ${TEMP_PATH}/ultracopier-src/plugins-alternative/ + fi + done + cd ${TEMP_PATH}/ultracopier-src/plugins/Languages/ + for plugins_name in `ls -1` + do + if [ -d ${plugins_name} ] + then + mkdir -p ${TEMP_PATH}/plugins/Languages/${plugins_name}/ + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + tar -c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 > ${TEMP_PATH}/plugins/Languages/${plugins_name}/Languages-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-src.tar.xz + fi + done +fi diff --git a/tools/to-pack/sub-script/assemble-windows-version-32.sh b/tools/to-pack/sub-script/assemble-windows-version-32.sh new file mode 100644 index 0000000..20f8899 --- /dev/null +++ b/tools/to-pack/sub-script/assemble-windows-version-32.sh @@ -0,0 +1,153 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +cd ${TEMP_PATH}/ + +ARCHITECTURE="x86" + +COMPIL_DEBUGREAL=1 +COMPIL_NORMAL=1 +COMPIL_PLUGIN=1 +COMPIL_ULTIMATE=1 + +source ${BASE_PWD}/sub-script/assemble.sh + +if [ ${COMPIL_DEBUGREAL} -eq 1 ] +then + assemble "ultracopier-debug-real" "${ARCHITECTURE}" 1 1 0 0 0 +fi + +if [ ${COMPIL_NORMAL} -eq 1 ] +then + assemble "ultracopier-debug" "${ARCHITECTURE}" 1 0 0 0 0 + assemble "ultracopier-debug-portable" "${ARCHITECTURE}" 1 0 1 0 0 + assemble "ultracopier-portable" "${ARCHITECTURE}" 0 0 1 0 0 + assemble "ultracopier-portableapps" "${ARCHITECTURE}" 0 0 1 0 0 + assemble "ultracopier" "${ARCHITECTURE}" 0 0 0 0 0 + + assemble "ultracopier-debug-static" "${ARCHITECTURE}" 1 0 0 0 1 + assemble "ultracopier-debug-portable-static" "${ARCHITECTURE}" 1 0 1 0 1 + assemble "ultracopier-portable-static" "${ARCHITECTURE}" 0 0 1 0 1 + assemble "ultracopier-static" "${ARCHITECTURE}" 0 0 0 0 1 +fi + +if [ ${COMPIL_ULTIMATE} -eq 1 ] +then + assemble "ultracopier-ultimate" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-sse2" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-sse3" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-pentium3" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-pentium4" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-core2" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-core-i" "${ARCHITECTURE}" 0 0 0 1 0 + + assemble "ultracopier-ultimate-k8" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-barcelona" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-bobcat" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-llano" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-bulldozer" "${ARCHITECTURE}" 0 0 0 1 0 +fi + +if [ ${COMPIL_PLUGIN} -eq 1 ] +then + +TARGET="ultracopier" +find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86<\/architecture>/g" {} \; > /dev/null 2>&1 +cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ +for plugins_cat in `ls -1` +do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} windows for the plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar --posix -c -f - ${plugins_name}/ | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ +done +cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ +for plugins_cat in `ls -1` +do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} windows for the alternative plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar --posix -c -f - ${plugins_name}/ | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ +done + + +TARGET="ultracopier-debug" +find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86<\/architecture>/g" {} \; > /dev/null 2>&1 +cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ +for plugins_cat in `ls -1` +do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} debug windows for the plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar --posix -c -f - ${plugins_name}/ | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ +done +cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ +for plugins_cat in `ls -1` +do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} debug windows for the alternative plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar --posix -c -f - ${plugins_name}/ | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ +done + +fi diff --git a/tools/to-pack/sub-script/assemble-windows-version-64.sh b/tools/to-pack/sub-script/assemble-windows-version-64.sh new file mode 100644 index 0000000..a158b83 --- /dev/null +++ b/tools/to-pack/sub-script/assemble-windows-version-64.sh @@ -0,0 +1,149 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +cd ${TEMP_PATH}/ + +COMPIL_DEBUGREAL=1 +COMPIL_NORMAL=1 +COMPIL_PLUGIN=1 +COMPIL_ULTIMATE=1 + +ARCHITECTURE="x86_64" + +source ${BASE_PWD}/sub-script/assemble.sh + +if [ ${COMPIL_DEBUGREAL} -eq 1 ] +then + assemble "ultracopier-debug-real" "${ARCHITECTURE}" 1 1 0 0 0 +fi +if [ ${COMPIL_NORMAL} -eq 1 ] +then + assemble "ultracopier-debug" "${ARCHITECTURE}" 1 0 0 0 0 + assemble "ultracopier-debug-portable" "${ARCHITECTURE}" 1 0 1 0 0 + assemble "ultracopier-portable" "${ARCHITECTURE}" 0 0 1 0 0 + assemble "ultracopier" "${ARCHITECTURE}" 0 0 0 0 0 + + assemble "ultracopier-debug-static" "${ARCHITECTURE}" 1 0 0 0 1 + assemble "ultracopier-debug-portable-static" "${ARCHITECTURE}" 1 0 1 0 1 + assemble "ultracopier-portable-static" "${ARCHITECTURE}" 0 0 1 0 1 + assemble "ultracopier-static" "${ARCHITECTURE}" 0 0 0 0 1 +fi + +if [ ${COMPIL_ULTIMATE} -eq 1 ] +then + assemble "ultracopier-ultimate" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-sse2" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-sse3" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-core2" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-core-i" "${ARCHITECTURE}" 0 0 0 1 0 + + assemble "ultracopier-ultimate-k8" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-barcelona" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-bobcat" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-llano" "${ARCHITECTURE}" 0 0 0 1 0 + assemble "ultracopier-ultimate-bulldozer" "${ARCHITECTURE}" 0 0 0 1 0 +fi + +if [ ${COMPIL_PLUGIN} -eq 1 ] +then + +TARGET="ultracopier" +find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86_64<\/architecture>/g" {} \; > /dev/null 2>&1 +cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ +for plugins_cat in `ls -1` +do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} windows for the plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar --posix -c -f - ${plugins_name}/ | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ +done +cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ +for plugins_cat in `ls -1` +do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} windows for the alternative plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar --posix -c -f - ${plugins_name}/ | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ +done + + +TARGET="ultracopier-debug" +find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86_64<\/architecture>/g" {} \; > /dev/null 2>&1 +cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ +for plugins_cat in `ls -1` +do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} debug windows for the plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar --posix -c -f - ${plugins_name}/ | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ +done +cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ +for plugins_cat in `ls -1` +do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} debug windows for the alternative plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar --posix -c -f - ${plugins_name}/ | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ +done + +fi diff --git a/tools/to-pack/sub-script/assemble.sh b/tools/to-pack/sub-script/assemble.sh new file mode 100644 index 0000000..8b344e9 --- /dev/null +++ b/tools/to-pack/sub-script/assemble.sh @@ -0,0 +1,219 @@ +#!/bin/bash + +function assemble { + TARGET=$1 + ARCHITECTURE=$2 + DEBUG=$3 + DEBUG_REAL=$4 + PORTABLE=$5 + ULTIMATE=$6 + STATIC=${7} + CGMINER=${8} + SUPERCOPIER=${9} + ULTRACOPIER_VERSION_FINAL=${ULTRACOPIER_VERSION} + DEBUGANDSETUP=0 + cd ${TEMP_PATH}/ + if [ ${DEBUG_REAL} -eq 1 ] + then + FINAL_ARCHIVE="${TARGET}-windows-${ARCHITECTURE}-${ULTRACOPIER_VERSION_FINAL}.7z" + else + FINAL_ARCHIVE="${TARGET}-windows-${ARCHITECTURE}-${ULTRACOPIER_VERSION_FINAL}.zip" + fi + if [ ! -d ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ ] + then + echo "no previous compilation folder found into ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/..." + exit + fi + if [ ! -e ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/*.exe ] + then + echo "no application found into ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/..." + exit + fi + if [ ! -e ${FINAL_ARCHIVE} ]; then + echo "creating the archive ${TARGET}..." + if [ ${STATIC} -ne 1 ] + then + mkdir -p ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/CopyEngine/Ultracopier/ + mkdir -p ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/ + mkdir -p ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Listener/catchcopy-v0002/ + mkdir -p ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/PluginLoader/catchcopy-v0002/ + mkdir -p ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/SessionLoader/Windows/ + if [ $SUPERCOPIER -eq 1 ] + then + mkdir -p ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Themes/Supercopier/ + else + mkdir -p ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Themes/Oxygen/ + fi + + if [ -e ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/plugins/ ] + then + if [ ${ULTIMATE} -eq 1 ] + then + rsync -aqrt ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/plugins/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ + rsync -aqrt ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/plugins-alternative/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ + else + rsync -aqrt ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/plugins/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ + fi + fi + + rsync -aqrt ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/plugins/Languages/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/ + rsync -aqrt ${ULTRACOPIERSOURCESPATH}/plugins/Languages/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/ --exclude=*.xml --exclude=*.qm + rsync -aqrt ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/plugins/CopyEngine/Ultracopier/Languages/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/CopyEngine/Ultracopier/Languages/ + if [ $SUPERCOPIER -eq 1 ] + then + rsync -aqrt ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/plugins-alternative/Themes/Supercopier/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Themes/Supercopier/ + else + rsync -aqrt ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/plugins/Themes/Oxygen/Languages/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Themes/Oxygen/Languages/ + fi + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ -iname "*.a" -exec rm {} \; > /dev/null 2>&1 + rm -Rf ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/plugins/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/plugins-alternative/ + else + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ -mindepth 1 -type d -exec rm -Rf {} \; + fi + if [ ${CGMINER} -eq 1 ] + then + if [ "${ARCHITECTURE}" != "x86" ] + then + rsync -aqrt ${BASE_PWD}/data/windows/miner-win64/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/addon/ + else + rsync -aqrt ${BASE_PWD}/data/windows/miner-win32/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/addon/ + fi + fi + cp -Rf ${ULTRACOPIERSOURCESPATH}/README ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/README.txt + cp -Rf ${ULTRACOPIERSOURCESPATH}/COPYING ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/COPYING.txt + if [ $SUPERCOPIER -eq 1 ] + then + sed -i "s/Ultracopier /Supercopier /g" ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/README.txt + fi + if [ 1 == 2 ] + then + if [ "${ARCHITECTURE}" == "x86" ] && [ ${DEBUG_REAL} -ne 1 ] + then + if [ $SUPERCOPIER -eq 1 ] + then + upx --lzma -9 ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/supercopier.exe > /dev/null 2>&1 + else + upx --lzma -9 ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ultracopier.exe > /dev/null 2>&1 + fi + fi + fi + cp -Rf ${BASE_PWD}/data/windows-${ARCHITECTURE}/dll-qt-debug/lib* ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ + if [ ${STATIC} -ne 1 ] + then + if [ ${DEBUG_REAL} -eq 1 ] + then + cp -Rf ${BASE_PWD}/data/windows-${ARCHITECTURE}/dll-qt-debug/* ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ + else + cp -Rf ${BASE_PWD}/data/windows-${ARCHITECTURE}/dll-qt/* ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ + fi + fi + if [ ${DEBUG} -eq 1 ] + then + CATCHCOPY_SUFIX="d" + else + CATCHCOPY_SUFIX="" + fi + if [ ${STATIC} -eq 1 ] + then + cp -Rf ${BASE_PWD}/data/windows/catchcopy32${CATCHCOPY_SUFIX}.dll ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/catchcopy32${CATCHCOPY_SUFIX}.dll + cp -Rf ${BASE_PWD}/data/windows/catchcopy64${CATCHCOPY_SUFIX}.dll ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/catchcopy64${CATCHCOPY_SUFIX}.dll + else + cp -Rf ${BASE_PWD}/data/windows/catchcopy32${CATCHCOPY_SUFIX}.dll ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/PluginLoader/catchcopy-v0002/catchcopy32${CATCHCOPY_SUFIX}.dll + cp -Rf ${BASE_PWD}/data/windows/catchcopy64${CATCHCOPY_SUFIX}.dll ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/PluginLoader/catchcopy-v0002/catchcopy64${CATCHCOPY_SUFIX}.dll + fi + if [ ${STATIC} -ne 1 ] + then + cp -f ${BASE_PWD}/data/qm-translation/fr.qm ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/fr/qt.qm + cp -f ${BASE_PWD}/data/qm-translation/ar.qm ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/ar/qt.qm + cp -f ${BASE_PWD}/data/qm-translation/es.qm ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/es/qt.qm + cp -f ${BASE_PWD}/data/qm-translation/ja.qm ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/ja/qt.qm + cp -f ${BASE_PWD}/data/qm-translation/ko.qm ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/ko/qt.qm + cp -f ${BASE_PWD}/data/qm-translation/pl.qm ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/pl/qt.qm + cp -f ${BASE_PWD}/data/qm-translation/pt.qm ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/pt/qt.qm + cp -f ${BASE_PWD}/data/qm-translation/ru.qm ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Languages/ru/qt.qm + fi + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ -iname "*.ts" -exec rm {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-${ARCHITECTURE}<\/architecture>/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION_FINAL}<\/version>/g" {} \; > /dev/null 2>&1 + + rm -Rf ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/SessionLoader/KDE4/ + rm -Rf ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/Listener/dbus/ + if [ ${PORTABLE} -eq 1 ] + then + rm -Rf ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/SessionLoader/ + fi + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ -type d -empty -delete > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ -type d -empty -delete > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ -type d -empty -delete > /dev/null 2>&1 + + if [ ${DEBUG_REAL} -eq 1 ] + then + mkdir ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ultracopier/ + mv ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/* ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ultracopier/ + mv ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ultracopier/ultracopier-debug.bat ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ + cp -Rf /home/wine/qt-5.0-32Bits-for-ultracopier/drive_c/mingw32/ ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/mingw32/ + fi + + find ${TARGET}-windows-${ARCHITECTURE}/ -type d -exec chmod 700 "{}" \; + find ${TARGET}-windows-${ARCHITECTURE}/ -type f -exec chmod 600 "{}" \; + chown -Rf root.root ${TARGET}-windows-${ARCHITECTURE}/ + find ${TARGET}-windows-${ARCHITECTURE}/ -type f -exec touch -t 201601020000.00 "{}" \; + find ${TARGET}-windows-${ARCHITECTURE}/ -type d -exec touch -t 201601020000.00 "{}" \; + if [ ${DEBUG_REAL} -eq 1 ] + then + 7za a -t7z -m0=lzma -mx=9 -mfb=64 -md=32m -ms=on ${FINAL_ARCHIVE} ${TARGET}-windows-${ARCHITECTURE}/ + else + zip -r -q -9 ${FINAL_ARCHIVE} ${TARGET}-windows-${ARCHITECTURE}/ + fi + #7za a -t7z -m0=lzma -mx=9 -mfb=64 -md=32m -ms=on ${FINAL_ARCHIVE} ${TARGET}-windows-${ARCHITECTURE}/ + #nice -n 15 ionice -c 3 tar cf - ${TARGET}-windows-${ARCHITECTURE}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | nice -n 15 ionice -c 3 xz -z -9 -e > ${FINAL_ARCHIVE} + if [ ! -e ${FINAL_ARCHIVE} ]; then + echo "${FINAL_ARCHIVE} not exists!"; + exit; + fi + echo "creating the archive ${TARGET}... done" + fi + FINAL_ARCHIVE="${TARGET}-windows-${ARCHITECTURE}-${ULTRACOPIER_VERSION_FINAL}-setup.exe" + if ( [ ${DEBUG} -eq 0 ] || [ ${DEBUGANDSETUP} -eq 1 ] ) && [ ${PORTABLE} -eq 0 ] && [ ! -e ${FINAL_ARCHIVE} ]; then + echo "creating the installer ${TARGET}..." + cd ${TEMP_PATH}/ + rm -Rf ${TEMP_PATH}/Ultracopier-installer-windows-${ARCHITECTURE}/ + mkdir -p ${TEMP_PATH}/Ultracopier-installer-windows-${ARCHITECTURE}/ + cd ${TEMP_PATH}/Ultracopier-installer-windows-${ARCHITECTURE}/ + if [ ${STATIC} -eq 1 ] + then + cp -aRf ${BASE_PWD}/data/windows/install-static.nsi ${TEMP_PATH}/Ultracopier-installer-windows-${ARCHITECTURE}/ + else + cp -aRf ${BASE_PWD}/data/windows/install.nsi ${TEMP_PATH}/Ultracopier-installer-windows-${ARCHITECTURE}/ + fi + #cp -aRf ${BASE_PWD}/data/windows/ultracopier.ico ${TEMP_PATH}/Ultracopier-installer-windows-${ARCHITECTURE}/ + rsync -art ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ ${TEMP_PATH}/Ultracopier-installer-windows-${ARCHITECTURE}/ + cd ${TEMP_PATH}/Ultracopier-installer-windows-${ARCHITECTURE}/ + sed -i -r "s/X.X.X.X/${ULTRACOPIER_VERSION_FINAL}/g" *.nsi > /dev/null 2>&1 + if [ "${ARCHITECTURE}" != "x86" ] + then + sed -i -r "s/PROGRAMFILES/PROGRAMFILES64/g" *.nsi > /dev/null 2>&1 + fi + if [ $SUPERCOPIER -eq 1 ] + then + sed -i -r "s/Ultracopier/Supercopier/g" *.nsi > /dev/null 2>&1 + sed -i -r "s/ultracopier/supercopier/g" *.nsi > /dev/null 2>&1 + fi + if [ ${DEBUG} -eq 1 ] + then + sed -i -r "s/catchcopy32.dll/catchcopy32d.dll/g" *.nsi > /dev/null 2>&1 + sed -i -r "s/catchcopy64.dll/catchcopy64d.dll/g" *.nsi > /dev/null 2>&1 + fi + DISPLAY="na" WINEPREFIX="${WINEBASEPATH}/ultracopier-general/" /usr/bin/nice -n 15 /usr/bin/ionice -c 3 wine "${WINEBASEPATH}/ultracopier-general/drive_c/Program Files (x86)/NSIS/makensis.exe" *.nsi > /dev/null 2>&1 + if [ ! -e *setup.exe ]; then + echo "${TEMP_PATH}/${FINAL_ARCHIVE} not exists!"; + pwd + exit; + fi + mv *setup.exe ${TEMP_PATH}/${FINAL_ARCHIVE} + cd ${TEMP_PATH}/ + echo "creating the installer ${TARGET}... done" + fi + rm -Rf ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}/ +} + diff --git a/tools/to-pack/sub-script/clean-all.sh b/tools/to-pack/sub-script/clean-all.sh new file mode 100755 index 0000000..83e8333 --- /dev/null +++ b/tools/to-pack/sub-script/clean-all.sh @@ -0,0 +1,16 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +cd ${TEMP_PATH}/ +for folder in `ls -1` +do + if [ -d "${folder}" ] && [ "${folder}" != "plugins" ] && [ "${folder}" != "doc" ] + then + rm -Rf ${folder}/ + fi +done + diff --git a/tools/to-pack/sub-script/compil-windows32.sh b/tools/to-pack/sub-script/compil-windows32.sh new file mode 100644 index 0000000..ce1ce01 --- /dev/null +++ b/tools/to-pack/sub-script/compil-windows32.sh @@ -0,0 +1,211 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +ARCHITECTURE="x86" + +COMPIL_DEBUGREAL=0 +COMPIL_NORMAL=1 +COMPIL_PLUGIN=0 +COMPIL_ULTIMATE=1 + +cd ${TEMP_PATH}/ + +source ${BASE_PWD}/sub-script/compil.sh +source ${BASE_PWD}/sub-script/assemble.sh + +if [ ${COMPIL_DEBUGREAL} -eq 1 ] +then + compil "ultracopier-debug-real-windows-x86" 1 1 0 0 32 "-g -mtune=generic -march=i686" 0 0 0 0 0 0 + assemble "ultracopier-debug-real" "${ARCHITECTURE}" 1 1 0 0 0 0 0 +fi + +if [ ${COMPIL_NORMAL} -eq 1 ] +then + #compil "supercopier-debug-windows-x86" 1 0 0 0 32 "-mtune=generic -march=i686" 0 0 0 0 1 0 + #assemble "supercopier-debug" "${ARCHITECTURE}" 1 0 0 0 0 0 1 + compil "supercopier-portable-windows-x86" 0 0 1 0 32 "-mtune=generic -march=i686" 0 0 0 0 1 0 + assemble "supercopier-portable" "${ARCHITECTURE}" 0 0 1 0 0 0 1 + compil "supercopier-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 0 0 0 0 1 0 + assemble "supercopier" "${ARCHITECTURE}" 0 0 0 0 0 0 1 + + compil "ultracopier-debug-windows-x86" 1 0 0 0 32 "-mtune=generic -march=i686" 0 0 0 0 0 0 + assemble "ultracopier-debug" "${ARCHITECTURE}" 1 0 0 0 0 0 0 + #compil "ultracopier-debug-portable-windows-x86" 1 0 1 0 32 "-mtune=generic -march=i686" 0 0 0 0 0 0 + #assemble "ultracopier-debug-portable" "${ARCHITECTURE}" 1 0 1 0 0 0 0 + compil "ultracopier-portable-windows-x86" 0 0 1 0 32 "-mtune=generic -march=i686" 0 0 0 0 0 0 + assemble "ultracopier-portable" "${ARCHITECTURE}" 0 0 1 0 0 0 0 + #compil "ultracopier-portableapps-windows-x86" 0 0 1 1 32 "-mtune=generic -march=i686" 0 0 0 0 0 0 + #assemble "ultracopier-portableapps" "${ARCHITECTURE}" 0 0 1 0 0 0 0 + compil "ultracopier-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 0 0 0 0 0 0 + assemble "ultracopier" "${ARCHITECTURE}" 0 0 0 0 0 0 0 + #compil "ultracopier-debug-static-windows-x86" 1 0 0 0 32 "-mtune=generic -march=i686" 0 0 1 0 0 0 + #assemble "ultracopier-debug-static" "${ARCHITECTURE}" 1 0 0 0 1 0 0 + #compil "ultracopier-debug-portable-static-windows-x86" 1 0 1 0 32 "-mtune=generic -march=i686" 0 0 1 0 0 0 + #assemble "ultracopier-debug-portable-static" "${ARCHITECTURE}" 1 0 1 0 1 0 0 + #compil "ultracopier-portable-static-windows-x86" 0 0 1 0 32 "-mtune=generic -march=i686" 0 0 1 0 0 0 + #assemble "ultracopier-portable-static" "${ARCHITECTURE}" 0 0 1 0 1 0 0 + #compil "ultracopier-static-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 0 0 1 0 0 0 + #assemble "ultracopier-static" "${ARCHITECTURE}" 0 0 0 0 1 0 0 +fi + +if [ ${COMPIL_ULTIMATE} -eq 1 ] +then + compil "supercopier-ultimate-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 1 0 0 0 1 0 + assemble "supercopier-ultimate" "${ARCHITECTURE}" 0 0 0 1 0 0 1 + compil "supercopier-ultimate-cgminer-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 1 0 0 1 1 0 + assemble "supercopier-ultimate-cgminer" "${ARCHITECTURE}" 0 0 0 1 0 1 1 + #compil "supercopier-ultimate-cgminer-static-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 1 0 1 1 1 0 + #assemble "supercopier-ultimate-cgminer-static" "${ARCHITECTURE}" 0 0 0 1 1 1 1 + + compil "supercopier-ultimate-portable-windows-x86" 0 0 1 0 32 "-mtune=generic -march=i686" 1 0 0 0 1 0 + assemble "supercopier-ultimate-portable" "${ARCHITECTURE}" 0 0 1 1 0 0 1 + compil "ultracopier-ultimate-portable-windows-x86" 0 0 1 0 32 "-mtune=generic -march=i686" 1 0 0 0 0 0 + assemble "ultracopier-ultimate-portable" "${ARCHITECTURE}" 0 0 1 1 0 0 0 + + compil "ultracopier-ultimate-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 1 0 0 0 0 0 + assemble "ultracopier-ultimate" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + compil "ultracopier-ultimate-cgminer-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 1 0 0 1 0 0 + assemble "ultracopier-ultimate-cgminer" "${ARCHITECTURE}" 0 0 0 1 0 1 0 + #compil "ultracopier-debug-ultimate-cgminer-windows-x86" 1 0 0 0 32 "-mtune=generic -march=i686" 1 0 0 1 0 0 + #assemble "ultracopier-debug-ultimate-cgminer" "${ARCHITECTURE}" 1 0 0 1 0 1 0 + #compil "ultracopier-ultimate-sse2-windows-x86" 0 0 0 0 32 "-msse -msse2" 1 0 0 0 0 0 + #assemble "ultracopier-ultimate-sse2" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + #compil "ultracopier-ultimate-sse3-windows-x86" 0 0 0 0 32 "-msse -msse2 -msse3" 1 0 0 0 0 0 + #assemble "ultracopier-ultimate-sse3" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + #compil "ultracopier-ultimate-pentium3-windows-x86" 0 0 0 0 32 "-msse -march=pentium3" 1 0 0 0 0 0 + #assemble "ultracopier-ultimate-pentium3" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + #compil "ultracopier-ultimate-pentium4-windows-x86" 0 0 0 0 32 "-msse -march=pentium4" 1 0 0 0 0 0 + #assemble "ultracopier-ultimate-pentium4" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + + compil "ultracopier-ultimate-core2-windows-x86" 0 0 0 0 32 "-msse -msse2 -msse3 -march=core2" 1 0 0 0 0 0 + assemble "ultracopier-ultimate-core2" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + compil "ultracopier-ultimate-core-i-windows-x86" 0 0 0 0 32 "-msse -msse2 -msse3 -march=core2" 1 0 0 0 0 0 + assemble "ultracopier-ultimate-core-i" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + compil "ultracopier-ultimate-k8-windows-x86" 0 0 0 0 32 "-msse -msse2 -march=k8" 1 0 0 0 0 0 + assemble "ultracopier-ultimate-k8" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + + compil "supercopier-ultimate-core2-windows-x86" 0 0 0 0 32 "-msse -msse2 -msse3 -march=core2" 1 0 0 0 1 0 + assemble "supercopier-ultimate-core2" "${ARCHITECTURE}" 0 0 0 1 0 0 1 + compil "supercopier-ultimate-core-i-windows-x86" 0 0 0 0 32 "-msse -msse2 -msse3 -march=core2" 1 0 0 0 1 0 + assemble "supercopier-ultimate-core-i" "${ARCHITECTURE}" 0 0 0 1 0 0 1 + compil "supercopier-ultimate-k8-windows-x86" 0 0 0 0 32 "-msse -msse2 -march=k8" 1 0 0 0 1 0 + assemble "supercopier-ultimate-k8" "${ARCHITECTURE}" 0 0 0 1 0 0 1 + + #compil "ultracopier-ultimate-barcelona-windows-x86" 0 0 0 0 32 "-msse -msse2 -march=k8" 1 0 0 0 0 + #assemble "ultracopier-ultimate-barcelona" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + #compil "ultracopier-ultimate-bobcat-windows-x86" 0 0 0 0 32 "-march=amdfam10 -mno-3dnow -mcx16 -mpopcnt -mssse3 -mmmx" 1 0 0 0 0 + #assemble "ultracopier-ultimate-bobcat" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + #compil "ultracopier-ultimate-llano-windows-x86" 0 0 0 0 32 "-march=amdfam10 -mcx16 -mpopcnt" 1 0 0 0 0 + #assemble "ultracopier-ultimate-llano" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + #compil "ultracopier-ultimate-bulldozer-windows-x86" 0 0 0 0 32 "-march=amdfam10 -mcx16 -msahf -maes -mpclmul -mpopcnt -mabm" 1 0 0 0 0 + #assemble "ultracopier-ultimate-bulldozer" "${ARCHITECTURE}" 0 0 0 1 0 0 0 +fi + +if [ ${COMPIL_PLUGIN} -eq 1 ] +then + compil "ultracopier-windows-x86-for-plugins" 0 0 0 0 32 "-mtune=generic -march=i686" 0 1 0 0 0 + #compil "ultracopier-debug-windows-x86-for-plugins" 1 0 0 0 32 "-mtune=generic -march=i686" 0 1 0 0 0 + TARGET="ultracopier" + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86<\/architecture>/g" {} \; > /dev/null 2>&1 + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} windows for the plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar -c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ + done + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} windows for the alternative plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar -c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ + done + + + TARGET="ultracopier-debug" + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86<\/architecture>/g" {} \; > /dev/null 2>&1 + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} debug windows for the plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar -c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ + done + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} debug windows for the alternative plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar -c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ + done + +fi diff --git a/tools/to-pack/sub-script/compil-windows64.sh b/tools/to-pack/sub-script/compil-windows64.sh new file mode 100644 index 0000000..ec5e60e --- /dev/null +++ b/tools/to-pack/sub-script/compil-windows64.sh @@ -0,0 +1,200 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +COMPIL_DEBUGREAL=0 +COMPIL_NORMAL=1 +COMPIL_PLUGIN=1 +COMPIL_ULTIMATE=1 + +ARCHITECTURE="x86_64" + +cd ${TEMP_PATH}/ + +source ${BASE_PWD}/sub-script/compil.sh +source ${BASE_PWD}/sub-script/assemble.sh + + +if [ ${COMPIL_DEBUGREAL} -eq 1 ] +then + compil "ultracopier-debug-real-windows-x86_64" 1 1 0 0 64 "-mtune=generic -march=nocona" 0 0 0 0 0 0 + assemble "ultracopier-debug-real" "${ARCHITECTURE}" 1 1 0 0 0 0 0 +fi +if [ ${COMPIL_NORMAL} -eq 1 ] +then + #compil "supercopier-debug-windows-x86_64" 1 0 0 0 64 "-mtune=generic -march=nocona" 0 0 0 0 1 0 + #assemble "supercopier-debug" "${ARCHITECTURE}" 1 0 0 0 0 0 1 + #compil "supercopier-portable-windows-x86_64" 0 0 1 0 64 "-mtune=generic -march=nocona" 0 0 0 0 1 0 + #assemble "supercopier-portable" "${ARCHITECTURE}" 0 0 1 0 0 0 1 + compil "supercopier-windows-x86_64" 0 0 0 0 64 "-mtune=generic -march=nocona" 0 0 0 0 1 0 + assemble "supercopier" "${ARCHITECTURE}" 0 0 0 0 0 0 1 + + #compil "ultracopier-debug-windows-x86_64" 1 0 0 0 64 "-mtune=generic -march=nocona" 0 0 0 0 0 0 + #assemble "ultracopier-debug" "${ARCHITECTURE}" 1 0 0 0 0 0 0 + #compil "ultracopier-debug-portable-windows-x86_64" 1 0 1 0 64 "-mtune=generic -march=nocona" 0 0 0 0 0 0 + #assemble "ultracopier-debug-portable" "${ARCHITECTURE}" 1 0 1 0 0 0 0 + #compil "ultracopier-portable-windows-x86_64" 0 0 1 0 64 "-mtune=generic -march=nocona" 0 0 0 0 0 0 + #assemble "ultracopier-portable" "${ARCHITECTURE}" 0 0 1 0 0 0 0 + compil "ultracopier-windows-x86_64" 0 0 0 0 64 "-mtune=generic -march=nocona" 0 0 0 0 0 0 + assemble "ultracopier" "${ARCHITECTURE}" 0 0 0 0 0 0 0 + #compil "ultracopier-debug-static-windows-x86_64" 1 0 0 0 64 "-mtune=generic -march=nocona" 0 0 1 0 0 0 + #assemble "ultracopier-debug-static" "${ARCHITECTURE}" 1 0 0 0 1 0 0 + #compil "ultracopier-debug-portable-static-windows-x86_64" 1 0 1 0 64 "-mtune=generic -march=nocona" 0 0 1 0 0 0 + #assemble "ultracopier-debug-portable-static" "${ARCHITECTURE}" 1 0 1 0 1 0 0 + #compil "ultracopier-portable-static-windows-x86_64" 0 0 1 0 64 "-mtune=generic -march=nocona" 0 0 1 0 0 0 + #assemble "ultracopier-portable-static" "${ARCHITECTURE}" 0 0 1 0 1 0 0 + #compil "ultracopier-static-windows-x86_64" 0 0 0 0 64 "-mtune=generic -march=nocona" 0 0 1 0 0 0 + #assemble "ultracopier-static" "${ARCHITECTURE}" 0 0 0 0 1 0 0 +fi + +if [ ${COMPIL_ULTIMATE} -eq 1 ] +then + compil "supercopier-ultimate-windows-x86_64" 0 0 0 0 64 "-mtune=generic -march=nocona" 1 0 0 0 1 0 + assemble "supercopier-ultimate" "${ARCHITECTURE}" 0 0 0 1 0 0 1 + compil "supercopier-ultimate-cgminer-windows-x86_64" 0 0 0 0 64 "-mtune=generic -march=nocona" 1 0 0 1 1 0 + assemble "supercopier-ultimate-cgminer" "${ARCHITECTURE}" 0 0 0 1 0 1 1 + #compil "supercopier-ultimate-cgminer-static-windows-x86_64" 0 0 0 0 64 "-mtune=generic -march=nocona" 1 0 1 1 1 0 + #assemble "supercopier-ultimate-cgminer-static" "${ARCHITECTURE}" 0 0 0 1 1 1 1 + + compil "ultracopier-ultimate-windows-x86_64" 0 0 0 0 64 "-mtune=generic -march=nocona" 1 0 0 0 0 0 + assemble "ultracopier-ultimate" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + compil "ultracopier-ultimate-cgminer-windows-x86_64" 0 0 0 0 64 "-mtune=generic -march=nocona" 1 0 0 1 0 0 + assemble "ultracopier-ultimate-cgminer" "${ARCHITECTURE}" 0 0 0 1 0 1 0 + #compil "ultracopier-debug-ultimate-cgminer-windows-x86_64" 1 0 0 0 64 "-mtune=generic -march=nocona" 1 0 0 1 0 0 + #assemble "ultracopier-debug-ultimate-cgminer" "${ARCHITECTURE}" 1 0 0 1 0 1 0 + #compil "ultracopier-ultimate-sse2-windows-x86_64" 0 0 0 0 64 "-msse -msse2" 1 0 0 0 0 0 + #assemble "ultracopier-ultimate-sse2" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + #compil "ultracopier-ultimate-sse3-windows-x86_64" 0 0 0 0 64 "-msse -msse2 -msse3" 1 0 0 0 0 0 + #assemble "ultracopier-ultimate-sse3" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + + compil "ultracopier-ultimate-core2-windows-x86_64" 0 0 0 0 64 "-msse -msse2 -msse3 -march=core2" 1 0 0 0 0 0 + assemble "ultracopier-ultimate-core2" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + compil "ultracopier-ultimate-core-i-windows-x86_64" 0 0 0 0 64 "-msse -msse2 -msse3 -march=core2" 1 0 0 0 0 0 + assemble "ultracopier-ultimate-core-i" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + compil "ultracopier-ultimate-k8-windows-x86_64" 0 0 0 0 64 "-msse -msse2 -march=k8" 1 0 0 0 0 0 + assemble "ultracopier-ultimate-k8" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + + compil "supercopier-ultimate-core2-windows-x86_64" 0 0 0 0 64 "-msse -msse2 -msse3 -march=core2" 1 0 0 0 1 0 + assemble "supercopier-ultimate-core2" "${ARCHITECTURE}" 0 0 0 1 0 0 1 + compil "supercopier-ultimate-core-i-windows-x86_64" 0 0 0 0 64 "-msse -msse2 -msse3 -march=core2" 1 0 0 0 1 0 + assemble "supercopier-ultimate-core-i" "${ARCHITECTURE}" 0 0 0 1 0 0 1 + compil "supercopier-ultimate-k8-windows-x86_64" 0 0 0 0 64 "-msse -msse2 -march=k8" 1 0 0 0 1 0 + assemble "supercopier-ultimate-k8" "${ARCHITECTURE}" 0 0 0 1 0 0 1 + + #compil "ultracopier-ultimate-barcelona-windows-x86_64" 0 0 0 0 64 "-msse -msse2 -march=k8" 1 0 0 0 0 0 + #assemble "ultracopier-ultimate-barcelona" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + #compil "ultracopier-ultimate-bobcat-windows-x86_64" 0 0 0 0 64 "-march=amdfam10 -mno-3dnow -mcx16 -mpopcnt -mssse3 -mmmx" 1 0 0 0 0 0 + #assemble "ultracopier-ultimate-bobcat" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + #compil "ultracopier-ultimate-llano-windows-x86_64" 0 0 0 0 64 "-march=amdfam10 -mcx16 -mpopcnt" 1 0 0 0 0 0 + #assemble "ultracopier-ultimate-llano" "${ARCHITECTURE}" 0 0 0 1 0 0 0 + #compil "ultracopier-ultimate-bulldozer-windows-x86_64" 0 0 0 0 64 "-march=amdfam10 -mcx16 -msahf -maes -mpclmul -mpopcnt -mabm" 1 0 0 0 0 0 + #assemble "ultracopier-ultimate-bulldozer" "${ARCHITECTURE}" 0 0 0 1 0 0 0 +fi + +if [ ${COMPIL_PLUGIN} -eq 1 ] +then + compil "ultracopier-windows-x86_64-for-plugins" 0 0 0 0 64 "-mtune=generic -march=nocona" 0 1 0 0 0 + #compil "ultracopier-debug-windows-x86_64-for-plugins" 1 0 0 0 64 "-mtune=generic -march=nocona" 0 1 0 0 0 + + TARGET="ultracopier" + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86_64<\/architecture>/g" {} \; > /dev/null 2>&1 + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} windows for the plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar -c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ + done + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} windows for the alternative plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar -c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ + done + + + TARGET="ultracopier-debug" + find ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86_64<\/architecture>/g" {} \; > /dev/null 2>&1 + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} debug windows for the plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar --c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins/ + done + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc ] && [ -f ${plugins_name}/*.dll ] + then + echo "pack the ${ARCHITECTURE} debug windows for the alternative plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + tar -c -f - ${plugins_name}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-windows-${ARCHITECTURE}-debug.urc + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-windows-${ARCHITECTURE}-for-plugins/plugins-alternative/ + done +fi diff --git a/tools/to-pack/sub-script/compil.sh b/tools/to-pack/sub-script/compil.sh new file mode 100644 index 0000000..93efdbd --- /dev/null +++ b/tools/to-pack/sub-script/compil.sh @@ -0,0 +1,429 @@ +#!/bin/bash + +function compil { + TARGET=$1 + DEBUG=$2 + DEBUG_REAL=$3 + PORTABLE=$4 + PORTABLEAPPS=$5 + BITS=$6 + CFLAGSCUSTOM="$7" + ULTIMATE=$8 + FORPLUGIN=$9 + STATIC=${10} + CGMINER=${11} + SUPERCOPIER=${12} + ILLEGAL=${13} + ULTRACOPIER_VERSION_FINAL=${ULTRACOPIER_VERSION} + cd ${BASE_PWD} + rsync -artq --delete ${ULTRACOPIERSOURCESPATH}/ ${TEMP_PATH}/${TARGET}/ + if [ $? -ne 0 ] + then + echo rsync -avrt ${ULTRACOPIERSOURCESPATH}/ ${TEMP_PATH}/${TARGET}/ fail into `pwd` $LINENO + exit 1 + fi + echo "${TARGET} rsync..." + for project in `find ${TEMP_PATH}/${TARGET}/plugins/Languages/ -mindepth 1 -type d` + do + cd ${project}/ + if [ -f *.ts ] + then + lrelease -nounfinished -compress -removeidentical *.ts > /dev/null 2>&1 + fi + cd ${TEMP_PATH}/${TARGET}/ + done + if [ $SUPERCOPIER -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "informations.xml" -exec sed -i "s/=ultracopier/=supercopier/g" {} \; + find ${TEMP_PATH}/${TARGET}/ -name "resources-windows.rc" -exec sed -i "s/Ultracopier/Supercopier/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -name "resources-windows.rc" -exec sed -i "s/ultracopier.exe/supercopier.exe/g" {} \; > /dev/null 2>&1 + mv ${TEMP_PATH}/${TARGET}/resources/supercopier-16x16.png ${TEMP_PATH}/${TARGET}/resources/ultracopier-16x16.png + mv ${TEMP_PATH}/${TARGET}/resources/supercopier-128x128.png ${TEMP_PATH}/${TARGET}/resources/ultracopier-128x128.png + mv ${TEMP_PATH}/${TARGET}/resources/supercopier-all-in-one.ico ${TEMP_PATH}/${TARGET}/resources/ultracopier-all-in-one.ico + mv ${TEMP_PATH}/${TARGET}/resources/supercopier.ico ${TEMP_PATH}/${TARGET}/resources/ultracopier.ico + mv ${TEMP_PATH}/${TARGET}/resources/supercopier.icns ${TEMP_PATH}/${TARGET}/resources/ultracopier.icns + # rm -Rf ${TEMP_PATH}/${TARGET}/plugins/Themes/Oxygen/ + fi + find ${TEMP_PATH}/${TARGET}/ -name "*.pro.user" -exec rm {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -name "*-build-desktop" -type d -exec rm -Rf {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION_FINAL}<\/version>/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -name "informations.xml" -exec sed -i -r "s/<pubDate>.*<\pubDate>/<pubDate>`date +%s`<\pubDate>/g" {} \; > /dev/null 2>&1 + if [ $DEBUG -eq 1 ] + then + echo 'CONFIG += console' >> ${TEMP_PATH}/${TARGET}/other-pro/ultracopier-core.pro + echo '' >> ${TEMP_PATH}/${TARGET}/other-pro/ultracopier-core.pro + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_DEBUG/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG/#define ULTRACOPIER_PLUGIN_DEBUG/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null 2>&1 + else + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_DEBUG/\/\/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_DEBUG/\/\/#define ULTRACOPIER_PLUGIN_DEBUG/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null 2>&1 + fi + if [ $SUPERCOPIER -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_MODE_SUPERCOPIER/#define ULTRACOPIER_MODE_SUPERCOPIER/g" {} \; > /dev/null 2>&1 + else + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_MODE_SUPERCOPIER/\/\/#define ULTRACOPIER_MODE_SUPERCOPIER/g" {} \; > /dev/null 2>&1 + fi + if [ $STATIC -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/g" {} \; > /dev/null 2>&1 + else + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/\/\/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/g" {} \; > /dev/null 2>&1 + fi + if [ $ULTIMATE -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_VERSION_ULTIMATE/#define ULTRACOPIER_VERSION_ULTIMATE/g" {} \; > /dev/null 2>&1 + else + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_ULTIMATE/\/\/#define ULTRACOPIER_VERSION_ULTIMATE/g" {} \; > /dev/null 2>&1 + fi + if [ $PORTABLE -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_VERSION_PORTABLE/#define ULTRACOPIER_VERSION_PORTABLE/g" {} \; > /dev/null 2>&1 + else + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLE/\/\/#define ULTRACOPIER_VERSION_PORTABLE/g" {} \; > /dev/null 2>&1 + fi + if [ $PORTABLEAPPS -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_VERSION_PORTABLEAPPS/#define ULTRACOPIER_VERSION_PORTABLEAPPS/g" {} \; > /dev/null 2>&1 + else + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLEAPPS/\/\/#define ULTRACOPIER_VERSION_PORTABLEAPPS/g" {} \; > /dev/null 2>&1 + fi + if [ ${BITS} -eq 32 ] + then + MXEPATH='/home/mxe-i686-w64-mingw32-shared-qt5/' + MXEPATHQMAKE='/home/mxe-i686-w64-mingw32-shared-qt5/usr/bin/i686-w64-mingw32.shared-qmake-qt5' + export PATH=/home/mxe-i686-w64-mingw32-shared-qt5/usr/bin:$PATH + fi + if [ ${BITS} -eq 64 ] + then + MXEPATH='/home/mxe-x86_64-w64-mingw32-shared-qt5/' + MXEPATHQMAKE='/home/mxe-x86_64-w64-mingw32-shared-qt5/usr/bin/x86_64-w64-mingw32.shared-qmake-qt5' + export PATH=/home/mxe-x86_64-w64-mingw32-shared-qt5/usr/bin:$PATH + fi + if [ ${STATIC} -eq 1 ] + then + if [ ${BITS} -eq 32 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86<\/architecture>/g" {} \; > /dev/null 2>&1 + # REAL_WINEPREFIX="${WINEBASEPATH}/qt-5.0-32Bits-static-for-ultracopier/" + fi + if [ ${BITS} -eq 64 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86_64<\/architecture>/g" {} \; > /dev/null 2>&1 + # REAL_WINEPREFIX="${WINEBASEPATH}/qt-5.0-64Bits-static-for-ultracopier/" + fi + else + if [ ${BITS} -eq 32 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86<\/architecture>/g" {} \; > /dev/null 2>&1 + # REAL_WINEPREFIX="${WINEBASEPATH}/qt-5.0-32Bits-for-ultracopier/" + fi + if [ ${BITS} -eq 64 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>windows-x86_64<\/architecture>/g" {} \; > /dev/null 2>&1 + # REAL_WINEPREFIX="${WINEBASEPATH}/qt-5.0-64Bits-for-ultracopier/" + fi + fi + REAL_WINEPREFIX="${MXEPATH}" + mkdir -p ${REAL_WINEPREFIX}/drive_c/temp/ + if [ ${DEBUG_REAL} -eq 1 ] + then + COMPIL_SUFFIX="debug" + COMPIL_FOLDER="debug" + else + COMPIL_SUFFIX="release" + COMPIL_FOLDER="release" + fi + rsync -art --delete ${TEMP_PATH}/${TARGET}/ ${REAL_WINEPREFIX}/drive_c/temp/ + if [ $? -ne 0 ] + then + echo line: $LINENO + echo rsync -art --delete ${TEMP_PATH}/${TARGET}/ ${REAL_WINEPREFIX}/drive_c/temp/ + exit 1 + fi + cd ${REAL_WINEPREFIX}/drive_c/temp/ + PLUGIN_FOLDER="${REAL_WINEPREFIX}/drive_c/temp/plugins/" + cd ${PLUGIN_FOLDER} + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${PLUGIN_FOLDER}/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -d ${plugins_name} ] && [ -f ${plugins_name}/informations.xml ] && [ ! -f ${plugins_name}/*.dll ] && [ ! -f ${plugins_name}/*.a ] && [ "${plugins_name}" != "KDE4" ] && [ "${plugins_name}" != "dbus" ] && [ "${plugins_name}" != "keybinding" ] && [ "${plugins_name}" != "ultracopier-keybinding" ] + then + # echo "${TARGET} compilation of the plugin: ${plugins_cat}/${plugins_name}..." + cd ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ + + if [ ${STATIC} -ne 1 ] && [[ (${FORPLUGIN} -eq 1 || "${plugins_name}" != "Rsync") ]] + then + if [[ ( $SUPERCOPIER -eq 1 && "${plugins_name}" = "Supercopier" ) || ( $SUPERCOPIER -eq 0 && "${plugins_name}" = "Oxygen" ) ]] + then + echo "${TARGET} compilation of the plugin: ${plugins_cat}/${plugins_name}..." + + cp ${BASE_PWD}/data/windows/resources-windows-ultracopier-plugins.rc ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ + if [ $? -ne 0 ] + then + echo error at cp ${BASE_PWD}/data/windows/resources-windows-ultracopier-plugins.rc ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ $LINENO + exit + fi + if [ ${STATIC} -ne 1 ] && [[ "${plugins_name}" != "Supercopier" ]] + then + cp ${BASE_PWD}/data/windows/resources-windows-ultracopier-plugins.rc ${PLUGIN_FOLDER}/${plugins_cat}/Oxygen/ + if [ $? -ne 0 ] + then + echo error at cp ${BASE_PWD}/data/windows/resources-windows-ultracopier-plugins.rc ${PLUGIN_FOLDER}/${plugins_cat}/Oxygen/ $LINENO + exit + fi + fi + echo '' >> *.pro + echo 'win32:RC_FILE += resources-windows-ultracopier-plugins.rc' >> *.pro + cp ${BASE_PWD}/data/windows/resources-windows-ultracopier-plugins.rc ./ + if [ $? -ne 0 ] + then + echo error at cp ${BASE_PWD}/data/windows/resources-windows-ultracopier-plugins.rc ./ $LINENO + exit + fi + # replace ULTRACOPIER_PLUGIN_VERSION + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + sed -i "s/ULTRACOPIER_PLUGIN_VERSION/${ULTRACOPIER_PLUGIN_VERSION}/g" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/resources-windows-ultracopier-plugins.rc + # replace ULTRACOPIER_PLUGIN_WINDOWS_VERSION + ULTRACOPIER_PLUGIN_WINDOWS_VERSION=`echo ${ULTRACOPIER_PLUGIN_VERSION} | sed "s/\./,/g"` + sed -i "s/ULTRACOPIER_PLUGIN_WINDOWS_VERSION/${ULTRACOPIER_PLUGIN_WINDOWS_VERSION}/g" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/resources-windows-ultracopier-plugins.rc + # replace ULTRACOPIER_PLUGIN_NAME + sed -i "s/ULTRACOPIER_PLUGIN_NAME/${plugins_name}/g" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/resources-windows-ultracopier-plugins.rc + # replace ULTRACOPIER_PLUGIN_FILENAME + ULTRACOPIER_PLUGIN_FILENAME=`grep -F "qtLibraryTarget" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/*.pro | sed -r "s/^.*\((.*)\).*$/\1/g"` + sed -i "s/ULTRACOPIER_PLUGIN_FILENAME/${ULTRACOPIER_PLUGIN_FILENAME}.dll/g" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/resources-windows-ultracopier-plugins.rc + ${MXEPATHQMAKE} QMAKE_CFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CFLAGS="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS="${CFLAGSCUSTOM}" *.pro + if [ $? -ne 0 ] + then + echo ${MXEPATHQMAKE} fail into `pwd` $LINENO + exit 1 + fi + if [ ! -f Makefile ] + then + ${MXEPATHQMAKE} QMAKE_CFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CFLAGS="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS="${CFLAGSCUSTOM}" *.pro + pwd + ${MXEPATHQMAKE} QMAKE_CFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CFLAGS="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS="${CFLAGSCUSTOM}" *.pro + echo "plugins not created (makefile not found)" + exit + fi + make -j4 ${COMPIL_SUFFIX} > /dev/null 2>&1 + + if [ ! -f ${COMPIL_FOLDER}/*.dll ] && [ ! -f ${COMPIL_FOLDER}/*.a ] + then + make -j4 ${COMPIL_SUFFIX} + pwd + echo make -j4 ${COMPIL_SUFFIX} + echo "plugins not created (1)" + rm -f informations.xml + # rm -Rf ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ + exit + fi + if [ ${STATIC} -eq 1 ] + then + if [ "${COMPIL_FOLDER}" != "./" ] + then + cp ${COMPIL_FOLDER}/*.a ./ + fi + else + if [ "${COMPIL_FOLDER}" != "./" ] + then + mv ${COMPIL_FOLDER}/*.dll ./ + fi + fi + # if [ $STATIC -ne 1 ] + # then + # /usr/bin/find ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ -type f -name "*.png" -exec rm -f {} \; + # fi + fi + fi + else + rm -Rf ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ + fi + cd ${PLUGIN_FOLDER}/${plugins_cat}/ + done + cd ${PLUGIN_FOLDER}/ + fi + done + + + if [ $ULTIMATE -eq 1 ] || [ $FORPLUGIN -eq 1 ] || [ $SUPERCOPIER -eq 1 ] + then + if [ 2 -gt 3 ] + then + PLUGIN_FOLDER="${REAL_WINEPREFIX}/drive_c/temp/plugins-alternative/" + cd ${PLUGIN_FOLDER}/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${PLUGIN_FOLDER}/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -d ${plugins_name} ] && [ -f ${plugins_name}/informations.xml ] && [ ! -f ${plugins_name}/*.dll ] && [ ! -f ${plugins_name}/*.a ] && [ -f ${plugins_name}/informations.xml ] && [ "${plugins_name}" != "KDE4" ] && [ "${plugins_name}" != "dbus" ] && [ "${plugins_name}" != "keybinding" ] && [ "${plugins_name}" != "ultracopier-keybinding" ] + then + echo "${TARGET} compilation of the plugin: ${plugins_cat}/${plugins_name}..." + cd ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ + + if [ ${STATIC} -ne 1 ] + then + cp ${BASE_PWD}/data/windows/resources-windows-ultracopier-plugins.rc ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ + echo '' >> *.pro + echo 'win32:RC_FILE += resources-windows-ultracopier-plugins.rc' >> *.pro + # replace ULTRACOPIER_PLUGIN_VERSION + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + sed -i "s/ULTRACOPIER_PLUGIN_VERSION/${ULTRACOPIER_PLUGIN_VERSION}/g" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/resources-windows-ultracopier-plugins.rc + # replace ULTRACOPIER_PLUGIN_WINDOWS_VERSION + ULTRACOPIER_PLUGIN_WINDOWS_VERSION=`echo ${ULTRACOPIER_PLUGIN_VERSION} | sed "s/\./,/g"` + sed -i "s/ULTRACOPIER_PLUGIN_WINDOWS_VERSION/${ULTRACOPIER_PLUGIN_WINDOWS_VERSION}/g" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/resources-windows-ultracopier-plugins.rc + # replace ULTRACOPIER_PLUGIN_NAME + sed -i "s/ULTRACOPIER_PLUGIN_NAME/${plugins_name}/g" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/resources-windows-ultracopier-plugins.rc + # replace ULTRACOPIER_PLUGIN_FILENAME + ULTRACOPIER_PLUGIN_FILENAME=`grep -F "qtLibraryTarget" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/*.pro | sed -r "s/^.*\((.*)\).*$/\1/g"` + sed -i "s/ULTRACOPIER_PLUGIN_FILENAME/${ULTRACOPIER_PLUGIN_FILENAME}.dll/g" ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/resources-windows-ultracopier-plugins.rc + fi + ${MXEPATHQMAKE} QMAKE_CFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CFLAGS="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS="${CFLAGSCUSTOM}" *.pro + if [ $? -ne 0 ] + then + echo ${MXEPATHQMAKE} fail into `pwd` $LINENO + exit 1 + fi + make -j4 ${COMPIL_SUFFIX} > /dev/null 2>&1 + if [ ! -f ${COMPIL_FOLDER}/*.dll ] && [ ! -f ${COMPIL_FOLDER}/*.a ] + then + make -j4 ${COMPIL_SUFFIX} + echo "plugins not created: ${plugins_cat}/${plugins_name}" + rm -f informations.xml + rm -Rf ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ + else + if [ ${STATIC} -eq 1 ] + then + if [ "${COMPIL_FOLDER}" != "./" ] + then + cp ${COMPIL_FOLDER}/*.a ./ + fi + else + if [ "${COMPIL_FOLDER}" != "./" ] + then + mv ${COMPIL_FOLDER}/*.dll ./ + fi + fi + fi + if [ $STATIC -ne 1 ] + then + /usr/bin/find ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ -type f -name "*.png" -exec rm -f {} \; + fi + else + rm -Rf ${PLUGIN_FOLDER}/${plugins_cat}/${plugins_name}/ + fi + cd ${PLUGIN_FOLDER}/${plugins_cat}/ + done + cd ${PLUGIN_FOLDER}/ + fi + done + fi + fi + + + + if [ ${STATIC} -eq 1 ] + then + cp ${TEMP_PATH}/${TARGET}/plugins/*/*/*/*.a ${TEMP_PATH}/${TARGET}/plugins/ > /dev/null 2>&1 + cp ${TEMP_PATH}/${TARGET}/plugins-alternative/Themes/Supercopier/*/*.a ${TEMP_PATH}/${TARGET}/plugins/ > /dev/null 2>&1 + fi + cd ${REAL_WINEPREFIX}/drive_c/temp/ + if [ ${STATIC} -eq 1 ] + then + if [ ${SUPERCOPIER} -eq 1 ] + then + echo "${TARGET} supercopier static application..." + cd other-pro/ + ${MXEPATHQMAKE} QMAKE_CFLAGS_RELEASE+="${CFLAGSCUSTOM}" QMAKE_CFLAGS+="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS="${CFLAGSCUSTOM}" supercopier-static.pro + else + echo "${TARGET} ultracopier static application..." + ${MXEPATHQMAKE} QMAKE_CFLAGS_RELEASE+="${CFLAGSCUSTOM}" QMAKE_CFLAGS+="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS="${CFLAGSCUSTOM}" ultracopier-static.pro + fi + else + cd other-pro/ + echo "${TARGET} application..." + if [ ${SUPERCOPIER} -eq 1 ] + then + ${MXEPATHQMAKE} QMAKE_CFLAGS_RELEASE+="${CFLAGSCUSTOM}" QMAKE_CFLAGS+="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS="${CFLAGSCUSTOM}" supercopier-core.pro + else + ${MXEPATHQMAKE} QMAKE_CFLAGS_RELEASE+="${CFLAGSCUSTOM}" QMAKE_CFLAGS+="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS_RELEASE="${CFLAGSCUSTOM}" QMAKE_CXXFLAGS="${CFLAGSCUSTOM}" ultracopier-core.pro + fi + fi + if [ $? -ne 0 ] + then + echo ${MXEPATHQMAKE} fail into `pwd` $LINENO + exit 1 + fi + make -j4 ${COMPIL_SUFFIX} > /dev/null 2>&1 + if [ ! -f ${COMPIL_FOLDER}/ultracopier.exe ] + then + make -j4 ${COMPIL_SUFFIX} > /tmp/bug.log 2>&1 + if [ ! -f ${COMPIL_FOLDER}/ultracopier.exe ] + then + cat /tmp/bug.log + echo "application not created" + exit + fi + fi + cd ${REAL_WINEPREFIX}/drive_c/temp/ + if [ $SUPERCOPIER -eq 1 ] + then + rm -Rf ${TEMP_PATH}/${TARGET}/plugins/Themes/Oxygen/ + fi + rsync -art --delete ${REAL_WINEPREFIX}/drive_c/temp/ ${TEMP_PATH}/${TARGET}/ + if [ $? -ne 0 ] + then + echo line: $LINENO + echo rsync -art --delete ${REAL_WINEPREFIX}/drive_c/temp/ ${TEMP_PATH}/${TARGET}/ + exit 1 + fi + rm -Rf ${REAL_WINEPREFIX}/drive_c/temp/ + cd ${TEMP_PATH}/${TARGET}/ + if [ "${COMPIL_FOLDER}" != "./" ] + then + if [ ! -e other-pro/${COMPIL_FOLDER}/ultracopier.exe ] + then + echo ${COMPIL_FOLDER}/ultracopier.exe not found into `pwd` + exit + fi + mv other-pro/${COMPIL_FOLDER}/ultracopier.exe ./ + fi + if [ 1 == 2 ] + then + if [ ${BITS} -eq 32 ] && [ ${DEBUG_REAL} -ne 1 ] + then + upx --lzma -9 ultracopier.exe > /dev/null 2>&1 + fi + fi + if [ $SUPERCOPIER -eq 1 ] + then + if [ ! -e ultracopier.exe ] + then + echo ultracopier.exe not found into `pwd` + exit + fi + mv ultracopier.exe supercopier.exe + fi + if [ $ULTIMATE -ne 1 ] && [ $FORPLUGIN -ne 1 ] && [ $SUPERCOPIER -ne 1 ] + then + rm -Rf ${TEMP_PATH}/${TARGET}/plugins-alternative/ + fi + /usr/bin/find ${TEMP_PATH}/${TARGET}/ -type f -not \( -name "*.xml" -or -name "*.dll" -or -name "*.a" -or -name "*.exe" -or -name "*.txt" -or -name "*.qm" \) -exec rm -f {} \; + rm -Rf ${TEMP_PATH}/${TARGET}/resources/ ${PLUGIN_FOLDER}/SessionLoader/KDE4/ + rm -Rf ${TEMP_PATH}/${TARGET}/resources/ ${PLUGIN_FOLDER}/Listener/dbus/ + find ${TEMP_PATH}/${TARGET}/ -type d -empty -delete > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -type d -empty -delete > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -type d -empty -delete > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -type d -empty -delete > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}/ -type d -empty -delete > /dev/null 2>&1 + echo "${TARGET} compilation... done" +} diff --git a/tools/to-pack/sub-script/doc.sh b/tools/to-pack/sub-script/doc.sh new file mode 100644 index 0000000..965e55c --- /dev/null +++ b/tools/to-pack/sub-script/doc.sh @@ -0,0 +1,119 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +cd ${TEMP_PATH}/ + +if [ ! -d ${TEMP_PATH}/doc/Ultracopier ] +then + echo "Making Ultracopier doc..." + cd ${BASE_PWD}/../doc/ + rm -Rf ${TEMP_PATH}/doc/tmp/ + mkdir -p ${TEMP_PATH}/doc/Ultracopier + mkdir -p ${TEMP_PATH}/doc/tmp + cp Doxyfile Doxyfile-tmp + sed -i "s/_PROJECT_NUMBER_/${ULTRACOPIER_VERSION}/g" Doxyfile-tmp + TEMP_PATH_DOXYGEN=`echo ${TEMP_PATH} | sed "s/\\//\\\\\\\\\\//g"` + ULTRACOPIERSOURCESPATH_DOXYGEN=`echo ${ULTRACOPIERSOURCESPATH_DOXYGEN} | sed "s/\\//\\\\\\\\\\//g"` + sed -i "s/TEMP_PATH/${TEMP_PATH_DOXYGEN}/g" Doxyfile-tmp + sed -i "s/ULTRACOPIERSOURCESPATH/${ULTRACOPIERSOURCESPATH_DOXYGEN}/g" Doxyfile-tmp + doxygen Doxyfile-tmp > /dev/null 2>&1 + rm Doxyfile-tmp + rsync -art --delete ${TEMP_PATH}/doc/tmp/ ${TEMP_PATH}/doc/Ultracopier/${ULTRACOPIER_VERSION}/ + rm -Rf ${TEMP_PATH}/doc/tmp/ + echo "Making Ultracopier doc... done" +fi + +if [ -d ${TEMP_PATH}/ultracopier-src/plugins/ ] +then + echo "Making Ultracopier plugins doc..." + cd ${TEMP_PATH}/ultracopier-src/plugins/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/ultracopier-src/plugins/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -d ${plugins_name} ] && [ -f ${plugins_name}/informations.xml ] + then + cd ${TEMP_PATH}/ultracopier-src/plugins/${plugins_cat}/${plugins_name}/ + rm -Rf ${TEMP_PATH}/doc/${plugins_cat}/${plugins_name}/ + mkdir -p ${TEMP_PATH}/doc/${plugins_cat}/${plugins_name}/ + echo "Making Ultracopier plugins doc... for ${plugins_cat}/${plugins_name}" + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + + cp ${BASE_PWD}/../doc/Doxyfile-plugin-template ${TEMP_PATH}/ultracopier-src/plugins/${plugins_cat}/${plugins_name}/Doxyfile + cp ${BASE_PWD}/../doc/footer.html ${TEMP_PATH}/ultracopier-src/plugins/${plugins_cat}/${plugins_name}/footer.html + + ULTRACOPIER_PLUGIN_TITLE=`grep -F "<title" informations.xml | grep -F "lang=\"en\"" | sed -r "s/^.*<!\[CDATA\[(.*)\]\]>.*$//g"` + + sed -i "s/_PROJECT_BRIEF_/${ULTRACOPIER_PLUGIN_TITLE}/g" Doxyfile + sed -i "s/_PROJECT_NUMBER_/${ULTRACOPIER_PLUGIN_VERSION}/g" Doxyfile + sed -i "s/_ULTRACOPIER_PLUGIN_NAME_/${plugins_cat} - ${plugins_name}/g" Doxyfile + TEMP_PATH_DOXYGEN=`echo ${TEMP_PATH} | sed "s/\\//\\\\\\\\\\//g"` + ULTRACOPIERSOURCESPATH_DOXYGEN=`echo ${ULTRACOPIERSOURCESPATH_DOXYGEN} | sed "s/\\//\\\\\\\\\\//g"` + sed -i "s/TEMP_PATH/${TEMP_PATH_DOXYGEN}/g" Doxyfile + sed -i "s/ULTRACOPIERSOURCESPATH/${ULTRACOPIERSOURCESPATH_DOXYGEN}/g" Doxyfile + + doxygen Doxyfile > /dev/null 2>&1 + rm -f Doxyfile footer.html + rsync -art ${TEMP_PATH}/doc/tmp/html/ ${TEMP_PATH}/doc/${plugins_cat}/${plugins_name}/${ULTRACOPIER_PLUGIN_VERSION}/ + cd ${TEMP_PATH}/ultracopier-src/plugins/${plugins_cat}/ + fi + cd ${TEMP_PATH}/ultracopier-src/plugins/${plugins_cat}/ + done + cd ${TEMP_PATH}/ultracopier-src/plugins/ + fi + done + echo "Making Ultracopier plugins doc... done" +fi + +if [ -d ${TEMP_PATH}/ultracopier-src/plugins/ ] +then + echo "Making Ultracopier plugins alternative doc..." + cd ${TEMP_PATH}/ultracopier-src/plugins-alternative/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/ultracopier-src/plugins-alternative/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -d ${plugins_name} ] && [ -f ${plugins_name}/informations.xml ] + then + cd ${TEMP_PATH}/ultracopier-src/plugins-alternative/${plugins_cat}/${plugins_name}/ + rm -Rf ${TEMP_PATH}/doc/${plugins_cat}/${plugins_name}/ + mkdir -p ${TEMP_PATH}/doc/${plugins_cat}/${plugins_name}/ + echo "Making Ultracopier plugins doc... for ${plugins_cat}/${plugins_name}" + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + + cp ${BASE_PWD}/../doc/Doxyfile-plugin-template ${TEMP_PATH}/ultracopier-src/plugins-alternative/${plugins_cat}/${plugins_name}/Doxyfile + cp ${BASE_PWD}/../doc/footer.html ${TEMP_PATH}/ultracopier-src/plugins-alternative/${plugins_cat}/${plugins_name}/footer.html + + ULTRACOPIER_PLUGIN_TITLE=`grep -F "<title" informations.xml | grep -F "lang=\"en\"" | sed -r "s/^.*<!\[CDATA\[(.*)\]\]>.*$//g"` + + sed -i "s/_PROJECT_BRIEF_/${ULTRACOPIER_PLUGIN_TITLE}/g" Doxyfile + sed -i "s/_PROJECT_NUMBER_/${ULTRACOPIER_PLUGIN_VERSION}/g" Doxyfile + sed -i "s/_ULTRACOPIER_PLUGIN_NAME_/${plugins_cat} - ${plugins_name}/g" Doxyfile + TEMP_PATH_DOXYGEN=`echo ${TEMP_PATH} | sed "s/\\//\\\\\\\\\\//g"` + ULTRACOPIERSOURCESPATH_DOXYGEN=`echo ${ULTRACOPIERSOURCESPATH_DOXYGEN} | sed "s/\\//\\\\\\\\\\//g"` + sed -i "s/TEMP_PATH/${TEMP_PATH_DOXYGEN}/g" Doxyfile + sed -i "s/ULTRACOPIERSOURCESPATH/${ULTRACOPIERSOURCESPATH_DOXYGEN}/g" Doxyfile + + doxygen Doxyfile > /dev/null 2>&1 + rm -f Doxyfile footer.html + rsync -art ${TEMP_PATH}/doc/tmp/html/ ${TEMP_PATH}/doc/${plugins_cat}/${plugins_name}/${ULTRACOPIER_PLUGIN_VERSION}/ + cd ${TEMP_PATH}/ultracopier-src/plugins-alternative/${plugins_cat}/ + fi + done + cd ${TEMP_PATH}/ultracopier-src/plugins-alternative/ + fi + done + echo "Making Ultracopier plugins alternative doc... done" +fi + +rm -Rf ${TEMP_PATH}/doc/tmp/ diff --git a/tools/to-pack/sub-script/linux.sh b/tools/to-pack/sub-script/linux.sh new file mode 100644 index 0000000..552dace --- /dev/null +++ b/tools/to-pack/sub-script/linux.sh @@ -0,0 +1,275 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +QMAKE="/usr/local/Qt-5.2.0/bin/qmake" + +mkdir -p ${TEMP_PATH} +cd ${TEMP_PATH}/ + +function compil { + DEBUG=$2 + ULTIMATE=$3 + cd ${TEMP_PATH}/ + TARGET=$1 + STATIC=$4 + FINAL_ARCHIVE="${TARGET}-linux-x86_64-pc-${ULTRACOPIER_VERSION}" + if [ ! -e ${FINAL_ARCHIVE}.tar.xz ] + then + echo "Making linux tar.xz: ${FINAL_ARCHIVE} ..." + + rm -Rf ${TEMP_PATH}/${FINAL_ARCHIVE}/ + /usr/bin/rsync -art --delete ${ULTRACOPIER_SOURCE}/ ${TEMP_PATH}/${FINAL_ARCHIVE}/ --exclude='*build*' --exclude='*Qt_5*' --exclude='*qt5*' --exclude='*.pro.user' + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "*.pro.user" -exec rm {} \; > /dev/null + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "*-build-desktop" -type d -exec rm -Rf {} \; > /dev/null + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>linux-x86_64-pc<\/architecture>/g" {} \; > /dev/null + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "informations.xml" -exec sed -i -r "s/<pubDate>.*<\pubDate>/<pubDate>`date +%s`<\pubDate>/g" {} \; > /dev/null + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLE/\/\/#define ULTRACOPIER_VERSION_PORTABLE/g" {} \; > /dev/null + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLEAPPS/\/\/#define ULTRACOPIER_VERSION_PORTABLEAPPS/g" {} \; > /dev/null + if [ ${DEBUG} -eq 1 ] + then + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_DEBUG/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG/#define ULTRACOPIER_PLUGIN_DEBUG/g" {} \; > /dev/null + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null + else + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_DEBUG/\/\/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_DEBUG/\/\/#define ULTRACOPIER_PLUGIN_DEBUG/g" {} \; > /dev/null + find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null + fi + if [ $STATIC -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/g" {} \; > /dev/null + else + + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/\/\/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/g" {} \; > /dev/null + fi + if [ $ULTIMATE -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_VERSION_ULTIMATE/#define ULTRACOPIER_VERSION_ULTIMATE/g" {} \; > /dev/null + else + find ${TEMP_PATH}/${TARGET}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_ULTIMATE/\/\/#define ULTRACOPIER_VERSION_ULTIMATE/g" {} \; > /dev/null + fi + + if [ ${DEBUG} -eq 1 ] + then + QTMODEDEBUGRELEASE="debug" + else + QTMODEDEBUGRELEASE="release" + fi + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins/CopyEngine/Ultracopier/ + ${QMAKE} -config ${QTMODEDEBUGRELEASE} + make -j 4 > /dev/null + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the linux: ${RETURN_CODE}" + exit + fi + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins/Listener/catchcopy-v0002/ + ${QMAKE} -config ${QTMODEDEBUGRELEASE} + make -j 4 > /dev/null + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the linux: ${RETURN_CODE}" + exit + fi + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins/Themes/Oxygen/ + ${QMAKE} -config ${QTMODEDEBUGRELEASE} + make -j 4 > /dev/null + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the linux: ${RETURN_CODE}" + exit + fi + if [ ${ULTIMATE} -eq 1 ] && [ $STATIC -ne 1 ] + then + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins-alternative/Themes/Clean/ + ${QMAKE} -config ${QTMODEDEBUGRELEASE} + make -j 4 > /dev/null + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the linux: ${RETURN_CODE}" + exit + fi + mv ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins-alternative/Themes/Clean/ ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins/Themes/Clean/ + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins-alternative/Themes/Windows/ + ${QMAKE} -config ${QTMODEDEBUGRELEASE} + make -j 4 > /dev/null + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the linux: ${RETURN_CODE}" + exit + fi + mv ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins-alternative/Themes/Windows/ ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins/Themes/Windows/ + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins-alternative/Themes/Teracopy/ + ${QMAKE} -config ${QTMODEDEBUGRELEASE} + make -j 4 > /dev/null + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the linux: ${RETURN_CODE}" + exit + fi + mv ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins-alternative/Themes/Teracopy/ ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins/Themes/Teracopy/ + fi + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/ + if [ $STATIC -eq 1 ] + then + cp -aRf ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins/*/*/*.a ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins/ + ${QMAKE} -config ${QTMODEDEBUGRELEASE} ultracopier-static.pro + else + ${QMAKE} -config ${QTMODEDEBUGRELEASE} ultracopier-core.pro + fi + make -j 4 > /dev/null + if [ $STATIC -eq 1 ] + then + upx --lzma -9 ultracopier > /dev/null + fi + RETURN_CODE=$? + if [ $? -ne 0 ] || [ ! -e ultracopier ] + then + echo "make failed on the linux: ${RETURN_CODE}" + exit + fi + cd ${TEMP_PATH}/${FINAL_ARCHIVE} + for SUBFOLDER in `ls -1` + do + if [ -d ${TEMP_PATH}/${FINAL_ARCHIVE}/${SUBFOLDER}/ ] + then + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/${SUBFOLDER}/ + for plugins_cat in `ls -1` + do + if [ -d ${TEMP_PATH}/${FINAL_ARCHIVE}/${SUBFOLDER}/${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/${SUBFOLDER}/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ ! -f ${plugins_name}/lib*.so ] && [ -d ${plugins_name}/ ] + then + rm -Rf ${TEMP_PATH}/${FINAL_ARCHIVE}/${SUBFOLDER}/${plugins_cat}/${plugins_name}/ + fi + done + fi + done + fi + done + cd ${TEMP_PATH}/ + rm -Rf ${TEMP_PATH}/${FINAL_ARCHIVE}/resources/ + if [ $STATIC -eq 1 ] + then + rm -Rf ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins/ + fi + if [ ${ULTIMATE} -ne 1 ] || [ $STATIC -eq 1 ] + then + rm -Rf ${TEMP_PATH}/${FINAL_ARCHIVE}/plugins-alternative/ + fi + /usr/bin/find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -type f -not \( -name "*.xml" -or -name "lib*.so" -or -name "ultracopier" -or -name "*.txt" -or -name "*.qm" \) -exec rm -f {} \; + /usr/bin/find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -type d \( -name "*build*" -or -name "Desktop" -or -name "Qt_5" -or -name "qt5" \) -exec rm -Rf {} \; + /usr/bin/find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -type d -empty -delete > /dev/null + /usr/bin/find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -type d -empty -delete > /dev/null + /usr/bin/find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -type d -empty -delete > /dev/null + /usr/bin/find ${TEMP_PATH}/${FINAL_ARCHIVE}/ -type d -empty -delete > /dev/null + cd ${TEMP_PATH}/ + if [ ! -e ${FINAL_ARCHIVE} ]; then + echo "${FINAL_ARCHIVE} not exists!"; + exit; + fi + nice -n 19 ionice -c 3 tar cpf - ${FINAL_ARCHIVE}/ | nice -n 19 ionice -c 3 xz -z -9 -e > ${FINAL_ARCHIVE}.tar.xz + if [ ! -e ${FINAL_ARCHIVE}.tar.xz ]; then + echo "${FINAL_ARCHIVE}.tar.xz not exists!"; + exit; + fi + echo "Making binary debug linux tar.xz... done" + else + echo "Archive already exists: ${FINAL_ARCHIVE}.tar.xz" + fi +} + +function compil_plugin { + DEBUG=$2 + cd ${TEMP_PATH}/ + TARGET=$1 + SUBFOLDER=$3 + FINAL_ARCHIVE="${TARGET}-linux-x86_64-pc-for-plugins" + + cp -aRf ${ULTRACOPIER_SOURCE}/ ${TEMP_PATH}/${FINAL_ARCHIVE}/ + + if [ ${DEBUG} -eq 1 ] + then + QTMODEDEBUGRELEASE="debug" + else + QTMODEDEBUGRELEASE="release" + fi + + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/${SUBFOLDER}/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/${SUBFOLDER}/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/1\.0\.0\.0/${ULTRACOPIER_VERSION}/g" {} \; > /dev/null + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + if [ -d ${plugins_name} ] && [ ! -f ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-linux-x86_64-pc.urc ] + then + echo "pack the ${ARCHITECTURE} linux for the alternative plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + + find ${plugins_name}/ -name "*.pro.user" -exec rm {} \; > /dev/null + find ${plugins_name}/ -name "*-build-desktop" -type d -exec rm -Rf {} \; > /dev/null + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>linux-x86_64-pc<\/architecture>/g" {} \; > /dev/null + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLE/\/\/#define ULTRACOPIER_VERSION_PORTABLE/g" {} \; > /dev/null + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLEAPPS/\/\/#define ULTRACOPIER_VERSION_PORTABLEAPPS/g" {} \; > /dev/null + if [ ${DEBUG} -eq 1 ] + then + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_DEBUG/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG/#define ULTRACOPIER_PLUGIN_DEBUG/g" {} \; > /dev/null + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null + else + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_DEBUG/\/\/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_DEBUG/\/\/#define ULTRACOPIER_PLUGIN_DEBUG/g" {} \; > /dev/null + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null + fi + cd ${plugins_name}/ + ${QMAKE} -config ${QTMODEDEBUGRELEASE} *.pro + make -j 4 > /dev/null + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/${SUBFOLDER}/${plugins_cat}/ + if [ ! -e ${plugins_name}/lib*.so ]; then + echo "no lib*.so file!"; + make -j 4 + else + find ${plugins_name}/ -iname "*.ts" -exec rm {} \; + find ${plugins_name}/ -maxdepth 1 -mindepth 1 -type f ! -iname "lib*.so" ! -iname "informations.xml" -exec rm {} \; + find ${plugins_name}/ -maxdepth 1 -mindepth 1 -type d ! -iname "Languages" -exec rm -Rf {} \; + /usr/bin/find ${plugins_name}/ -type d -empty -delete > /dev/null + /usr/bin/find ${plugins_name}/ -type d -empty -delete > /dev/null + /usr/bin/find ${plugins_name}/ -type d -empty -delete > /dev/null + /usr/bin/find ${plugins_name}/ -type d -empty -delete > /dev/null + + tar --posix -c -f - ${plugins_name}/ | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-linux-x86_64-pc.urc + fi + fi + fi + done + fi + cd ${TEMP_PATH}/${FINAL_ARCHIVE}/${SUBFOLDER}/ + done +} + +compil "ultracopier" 0 0 0 0 +compil "ultracopier-ultimate" 0 1 0 0 +compil "ultracopier-debug" 1 0 0 0 + +#compil_plugin "ultracopier" 0 "plugins-alternative" +#compil_plugin "ultracopier" 0 "plugins" diff --git a/tools/to-pack/sub-script/mac.sh b/tools/to-pack/sub-script/mac.sh new file mode 100644 index 0000000..79665f1 --- /dev/null +++ b/tools/to-pack/sub-script/mac.sh @@ -0,0 +1,275 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +mkdir -p ${TEMP_PATH} +cd ${TEMP_PATH}/ + +IPMAC="192.168.158.34" +SSHUSER="user" +QTVERSION="5.4.0" +QTVERSIONMAJ="5.4" + +ssh root@${IPMAC} "cd /usr/bin/;ln -s /Applications/Xcode.app/Contents/Developer//Toolchains/XcodeDefault.xctoolchain/usr/bin/otool" +ssh root@${IPMAC} "mkdir /opt/;mkdir /opt/local/;mkdir /opt/local/lib/;cd /opt/local/lib/;ln -s /usr/lib/libz.1.dylib" + +#compil "ultracopier" 1 0 +function compil { + DEBUG=$2 + ULTIMATE=$3 + cd ${TEMP_PATH}/ + TARGET=$1 + STATIC=$4 + DEBUGREAL=${5} + if [ $DEBUGREAL -eq 1 ] + then + LIBEXT="_debug.dylib" + CONFIGARG="debug" + else + LIBEXT=".dylib" + CONFIGARG="release" + fi + FINAL_ARCHIVE="${TARGET}-mac-os-x-${ULTRACOPIER_VERSION}.dmg" + if [ ! -e ${FINAL_ARCHIVE} ] + then + echo "Making Mac dmg: ${FINAL_ARCHIVE} ..." + + rm -Rf ${TEMP_PATH}/${TARGET}-mac-os-x/ + cp -aRf ${ULTRACOPIER_SOURCE}/ ${TEMP_PATH}/${TARGET}-mac-os-x/ + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "*.pro.user" -exec rm {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "*-build-desktop" -type d -exec rm -Rf {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>mac-os-x<\/architecture>/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "informations.xml" -exec sed -i -r "s/<version>.*<\/version>/<version>${ULTRACOPIER_VERSION}<\/version>/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "informations.xml" -exec sed -i -r "s/<pubDate>.*<\pubDate>/<pubDate>`date +%s`<\pubDate>/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLE/\/\/#define ULTRACOPIER_VERSION_PORTABLE/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLEAPPS/\/\/#define ULTRACOPIER_VERSION_PORTABLEAPPS/g" {} \; > /dev/null 2>&1 + if [ ${DEBUG} -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_DEBUG/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG/#define ULTRACOPIER_PLUGIN_DEBUG/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null 2>&1 + else + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_DEBUG/\/\/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_DEBUG/\/\/#define ULTRACOPIER_PLUGIN_DEBUG/g" {} \; > /dev/null 2>&1 + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null 2>&1 + fi + if [ $STATIC -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/g" {} \; > /dev/null 2>&1 + else + + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/\/\/#define ULTRACOPIER_PLUGIN_ALL_IN_ONE/g" {} \; > /dev/null 2>&1 + fi + if [ $ULTIMATE -eq 1 ] + then + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_VERSION_ULTIMATE/#define ULTRACOPIER_VERSION_ULTIMATE/g" {} \; > /dev/null 2>&1 + else + find ${TEMP_PATH}/${TARGET}-mac-os-x/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_ULTIMATE/\/\/#define ULTRACOPIER_VERSION_ULTIMATE/g" {} \; > /dev/null 2>&1 + fi + + echo "try connect" + ssh ${SSHUSER}@${IPMAC} "rm -fR /Users/${SSHUSER}/Desktop/ultracopier/" + echo "try rsync" + rsync -art ${TEMP_PATH}/${TARGET}-mac-os-x/ ${SSHUSER}@${IPMAC}:/Users/${SSHUSER}/Desktop/ultracopier/ + + echo "try qmake" + BASEAPPNAME="ultracopier.app" + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/;/Users/user/Qt${QTVERSION}/${QTVERSIONMAJ}/clang_64/bin/qmake /Users/${SSHUSER}/Desktop/ultracopier/ultracopier-core.pro -spec macx-g++ -config ${CONFIGARG}" + echo "try make" + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/;/Applications/Xcode.app/Contents/Developer/usr/bin/gnumake -j 3 > /dev/null > /dev/null" + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the mac: ${RETURN_CODE}" + exit + fi + echo "try make plugins" + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/plugins/CopyEngine/Ultracopier/;/Users/user/Qt${QTVERSION}/${QTVERSIONMAJ}/clang_64/bin/qmake /Users/${SSHUSER}/Desktop/ultracopier/plugins/CopyEngine/Ultracopier/*.pro -spec macx-g++ -config ${CONFIGARG}" + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/plugins/CopyEngine/Ultracopier/;/Applications/Xcode.app/Contents/Developer/usr/bin/gnumake -j 3 > /dev/null" + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the mac: ${RETURN_CODE}" + exit + fi + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/plugins/Listener/catchcopy-v0002/;/Users/user/Qt${QTVERSION}/${QTVERSIONMAJ}/clang_64/bin/qmake /Users/${SSHUSER}/Desktop/ultracopier/plugins/Listener/catchcopy-v0002/*.pro -spec macx-g++ -config ${CONFIGARG}" + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/plugins/Listener/catchcopy-v0002/;/Applications/Xcode.app/Contents/Developer/usr/bin/gnumake -j 3 > /dev/null" + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the mac: ${RETURN_CODE}" + exit + fi + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/plugins/Themes/Oxygen/;/Users/user/Qt${QTVERSION}/${QTVERSIONMAJ}/clang_64/bin/qmake /Users/${SSHUSER}/Desktop/ultracopier/plugins/Themes/Oxygen/*.pro -spec macx-g++ -config ${CONFIGARG}" + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/plugins/Themes/Oxygen/;/Applications/Xcode.app/Contents/Developer/usr/bin/gnumake -j 3 > /dev/null" + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the mac: ${RETURN_CODE}" + exit + fi + if [ ${ULTIMATE} -eq 1 ] + then + echo "do the ultimate plugin" + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Windows/;/Users/user/Qt${QTVERSION}/${QTVERSIONMAJ}/clang_64/bin/qmake /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Windows/*.pro -spec macx-g++ -config ${CONFIGARG}" > /dev/null 2>&1 + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Windows/;/Applications/Xcode.app/Contents/Developer/usr/bin/gnumake -j 3 > /dev/null" + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the mac: ${RETURN_CODE}" + exit + fi + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Teracopy/;/Users/user/Qt${QTVERSION}/${QTVERSIONMAJ}/clang_64/bin/qmake /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Teracopy/*.pro -spec macx-g++ -config ${CONFIGARG}" > /dev/null 2>&1 + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Teracopy/;/Applications/Xcode.app/Contents/Developer/usr/bin/gnumake -j 3 > /dev/null" + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the mac: ${RETURN_CODE}" + exit + fi + ssh ${SSHUSER}@${IPMAC} "mkdir -p /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Windows/" + ssh ${SSHUSER}@${IPMAC} "mkdir -p /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Teracopy/" + ssh ${SSHUSER}@${IPMAC} "cp /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Windows/informations.xml /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Windows/informations.xml" + ssh ${SSHUSER}@${IPMAC} "cp /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Teracopy/informations.xml /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Teracopy/informations.xml" + ssh ${SSHUSER}@${IPMAC} "cp /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Windows/libinterface${LIBEXT} /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Windows/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "cp /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Teracopy/libinterface${LIBEXT} /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Teracopy/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "rsync -aqrt /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Windows/Languages/ /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Windows/Languages/" + ssh ${SSHUSER}@${IPMAC} "rsync -aqrt /Users/${SSHUSER}/Desktop/ultracopier/plugins-alternative/Themes/Teracopy/Languages/ /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Teracopy/Languages/" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtGui.framework/Versions/5/QtGui @executable_path/../Frameworks/QtGui.framework/Versions/5/QtGui /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Windows/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtCore.framework/Versions/5/QtCore @executable_path/../Frameworks/QtCore.framework/Versions/5/QtCore /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Windows/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtNetwork.framework/Versions/5/QtNetwork @executable_path/../Frameworks/QtNetwork.framework/Versions/5/QtNetwork /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Windows/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtGui.framework/Versions/5/QtGui @executable_path/../Frameworks/QtGui.framework/Versions/5/QtGui /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Teracopy/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtCore.framework/Versions/5/QtCore @executable_path/../Frameworks/QtCore.framework/Versions/5/QtCore /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Teracopy/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtNetwork.framework/Versions/5/QtNetwork @executable_path/../Frameworks/QtNetwork.framework/Versions/5/QtNetwork /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Teracopy/libinterface${LIBEXT}" + fi + echo "make the folder" + ssh ${SSHUSER}@${IPMAC} "mkdir /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/Frameworks" + + ssh ${SSHUSER}@${IPMAC} "mkdir -p /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/CopyEngine/Ultracopier/" + ssh ${SSHUSER}@${IPMAC} "mkdir -p /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Languages/" + ssh ${SSHUSER}@${IPMAC} "mkdir -p /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Listener/catchcopy-v0002/" + + echo "put the informations.xml" + ssh ${SSHUSER}@${IPMAC} "cp /Users/${SSHUSER}/Desktop/ultracopier/plugins/CopyEngine/Ultracopier/informations.xml /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/CopyEngine/Ultracopier/informations.xml" + ssh ${SSHUSER}@${IPMAC} "cp /Users/${SSHUSER}/Desktop/ultracopier/plugins/Listener/catchcopy-v0002/informations.xml /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Listener/catchcopy-v0002/informations.xml" + + ssh ${SSHUSER}@${IPMAC} "cp /Users/${SSHUSER}/Desktop/ultracopier/plugins/CopyEngine/Ultracopier/libcopyEngine${LIBEXT} /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/CopyEngine/Ultracopier/libcopyEngine${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "cp /Users/${SSHUSER}/Desktop/ultracopier/plugins/Listener/catchcopy-v0002/liblistener${LIBEXT} /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Listener/catchcopy-v0002/liblistener${LIBEXT}" + + ssh ${SSHUSER}@${IPMAC} "rsync -aqrt /Users/${SSHUSER}/Desktop/ultracopier/plugins/Languages/ /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Languages/" + ssh ${SSHUSER}@${IPMAC} "rsync -aqrt /Users/${SSHUSER}/Desktop/ultracopier/plugins/CopyEngine/Ultracopier/Languages/ /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/CopyEngine/Ultracopier/Languages/" + ssh ${SSHUSER}@${IPMAC} "find /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/ -iname \"*.ts\" -exec rm {} \; > /dev/null 2>&1" + + echo "finish the link" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtGui.framework/Versions/5/QtGui @executable_path/../Frameworks/QtGui.framework/Versions/5/QtGui /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/CopyEngine/Ultracopier/libcopyEngine${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtCore.framework/Versions/5/QtCore @executable_path/../Frameworks/QtCore.framework/Versions/5/QtCore /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/CopyEngine/Ultracopier/libcopyEngine${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtNetwork.framework/Versions/5/QtNetwork @executable_path/../Frameworks/QtNetwork.framework/Versions/5/QtNetwork /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/CopyEngine/Ultracopier/libcopyEngine${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtGui.framework/Versions/5/QtGui @executable_path/../Frameworks/QtGui.framework/Versions/5/QtGui /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Listener/catchcopy-v0002/liblistener${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtCore.framework/Versions/5/QtCore @executable_path/../Frameworks/QtCore.framework/Versions/5/QtCore /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Listener/catchcopy-v0002/liblistener${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtNetwork.framework/Versions/5/QtNetwork @executable_path/../Frameworks/QtNetwork.framework/Versions/5/QtNetwork /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Listener/catchcopy-v0002/liblistener${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "mkdir -p /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Oxygen/" + ssh ${SSHUSER}@${IPMAC} "cp /Users/${SSHUSER}/Desktop/ultracopier/plugins/Themes/Oxygen/informations.xml /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Oxygen/informations.xml" + ssh ${SSHUSER}@${IPMAC} "cp /Users/${SSHUSER}/Desktop/ultracopier/plugins/Themes/Oxygen/libinterface${LIBEXT} /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Oxygen/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "rsync -aqrt /Users/${SSHUSER}/Desktop/ultracopier/plugins/Themes/Oxygen/Languages/ /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Oxygen/Languages/" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtGui.framework/Versions/5/QtGui @executable_path/../Frameworks/QtGui.framework/Versions/5/QtGui /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Oxygen/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtCore.framework/Versions/5/QtCore @executable_path/../Frameworks/QtCore.framework/Versions/5/QtCore /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Oxygen/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtNetwork.framework/Versions/5/QtNetwork @executable_path/../Frameworks/QtNetwork.framework/Versions/5/QtNetwork /Users/${SSHUSER}/Desktop/ultracopier/${BASEAPPNAME}/Contents/MacOS/Themes/Oxygen/libinterface${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/;/Users/user/Qt${QTVERSION}/${QTVERSIONMAJ}/clang_64/bin/macdeployqt ${BASEAPPNAME}/ -dmg" + rsync -art ${SSHUSER}@${IPMAC}:/Users/${SSHUSER}/Desktop/ultracopier/ultracopier.dmg ${TEMP_PATH}/${FINAL_ARCHIVE} + if [ ! -e ${FINAL_ARCHIVE} ]; then + echo "${FINAL_ARCHIVE} not exists!"; + exit; + fi + ssh ${SSHUSER}@${IPMAC} "rm -fR /Users/${SSHUSER}/Desktop/ultracopier/" + echo "Making binary debug Mac dmg... done" + else + echo "Archive already exists: ${FINAL_ARCHIVE}" + fi +} + +function compil_plugin { + DEBUG=$2 + cd ${TEMP_PATH}/ + TARGET=$1 + SUBFOLDER=$3 + + rsync -art --delete ${ULTRACOPIER_SOURCE}/ ${TEMP_PATH}/${TARGET}-mac-os-x/ + + cd ${TEMP_PATH}/${TARGET}-mac-os-x/${SUBFOLDER}/ + for plugins_cat in `ls -1` + do + if [ -d ${plugins_cat} ] && [ "${plugins_cat}" != "Languages" ] + then + cd ${TEMP_PATH}/${TARGET}-mac-os-x/${SUBFOLDER}/${plugins_cat}/ + for plugins_name in `ls -1` + do + if [ -f ${plugins_name}/informations.xml ] + then + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/1\.0\.0\.0/${ULTRACOPIER_VERSION}/g" {} \; > /dev/null 2>&1 + ULTRACOPIER_PLUGIN_VERSION=`grep -F "<version>" ${plugins_name}/informations.xml | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` + # && [ ${plugins_name} != "Windows" ] -> for the plugins interface + if [ -d ${plugins_name} ] && [ ! -f "${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-mac-os-x.urc" ] && [ ${plugins_name} != "dbus" ] && [ ${plugins_cat} != "SessionLoader" ] + then + echo "pack the mac for the alternative plugin: ${plugins_cat}/${plugins_name}" + mkdir -p ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/ + + find ${plugins_name}/ -name "*.pro.user" -exec rm {} \; > /dev/null 2>&1 + find ${plugins_name}/ -name "*-build-desktop" -type d -exec rm -Rf {} \; > /dev/null 2>&1 + find ${plugins_name}/ -name "informations.xml" -exec sed -i -r "s/<architecture>.*<\/architecture>/<architecture>mac-os-x<\/architecture>/g" {} \; > /dev/null 2>&1 + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLE/\/\/#define ULTRACOPIER_VERSION_PORTABLE/g" {} \; > /dev/null 2>&1 + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_VERSION_PORTABLEAPPS/\/\/#define ULTRACOPIER_VERSION_PORTABLEAPPS/g" {} \; > /dev/null 2>&1 + if [ ${DEBUG} -eq 1 ] + then + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_DEBUG/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null 2>&1 + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG/#define ULTRACOPIER_PLUGIN_DEBUG/g" {} \; > /dev/null 2>&1 + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null 2>&1 + else + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_DEBUG/\/\/#define ULTRACOPIER_DEBUG/g" {} \; > /dev/null 2>&1 + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_DEBUG/\/\/#define ULTRACOPIER_PLUGIN_DEBUG/g" {} \; > /dev/null 2>&1 + find ${plugins_name}/ -name "Variable.h" -exec sed -i "s/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/\/\/#define ULTRACOPIER_PLUGIN_DEBUG_WINDOW/g" {} \; > /dev/null 2>&1 + fi + + ssh ${SSHUSER}@${IPMAC} "rm -fR /Users/${SSHUSER}/Desktop/ultracopier/" + rsync -art ${TEMP_PATH}/${TARGET}-mac-os-x/ ${SSHUSER}@${IPMAC}:/Users/${SSHUSER}/Desktop/ultracopier/ + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/${SUBFOLDER}/${plugins_cat}/${plugins_name}/;/Users/user/Qt${QTVERSION}/${QTVERSIONMAJ}/clang_64/bin/qmake /Users/${SSHUSER}/Desktop/ultracopier/${SUBFOLDER}/${plugins_cat}/${plugins_name}/*.pro -spec macx-g++ -config ${CONFIGARG}" + ssh ${SSHUSER}@${IPMAC} "cd /Users/${SSHUSER}/Desktop/ultracopier/${SUBFOLDER}/${plugins_cat}/${plugins_name}/;/Applications/Xcode.app/Contents/Developer/usr/bin/gnumake -j 3 > /dev/null" + RETURN_CODE=$? + if [ $? -ne 0 ] + then + echo "make failed on the mac: ${RETURN_CODE}" + exit + fi + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtGui.framework/Versions/5/QtGui @executable_path/../Frameworks/QtGui.framework/Versions/5/QtGui /Users/${SSHUSER}/Desktop/ultracopier/${SUBFOLDER}/${plugins_cat}/${plugins_name}/*${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtCore.framework/Versions/5/QtCore @executable_path/../Frameworks/QtCore.framework/Versions/5/QtCore /Users/${SSHUSER}/Desktop/ultracopier/${SUBFOLDER}/${plugins_cat}/${plugins_name}/*${LIBEXT}" + ssh ${SSHUSER}@${IPMAC} "/Applications/Xcode.app//Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool -change QtNetwork.framework/Versions/5/QtNetwork @executable_path/../Frameworks/QtNetwork.framework/Versions/5/QtNetwork /Users/${SSHUSER}/Desktop/ultracopier/${SUBFOLDER}/${plugins_cat}/${plugins_name}/*${LIBEXT}" + rsync -art "${SSHUSER}@${IPMAC}:/Users/${SSHUSER}/Desktop/ultracopier/${SUBFOLDER}/${plugins_cat}/${plugins_name}/*${LIBEXT}" ${plugins_name}/ + if [ ! -e ${plugins_name}/*.dylib ]; then + echo "no .dylib file!"; + else + find ${plugins_name}/ -iname "*.ts" -exec rm {} \; + find ${plugins_name}/ -maxdepth 1 -mindepth 1 -type f ! -iname "*.dylib" ! -iname "informations.xml" -exec rm {} \; + find ${plugins_name}/ -maxdepth 1 -mindepth 1 -type d ! -iname "Languages" -exec rm -Rf {} \; + /usr/bin/find ${plugins_name}/ -type d -empty -delete > /dev/null 2>&1 + /usr/bin/find ${plugins_name}/ -type d -empty -delete > /dev/null 2>&1 + /usr/bin/find ${plugins_name}/ -type d -empty -delete > /dev/null 2>&1 + /usr/bin/find ${plugins_name}/ -type d -empty -delete > /dev/null 2>&1 + + tar --posix -c -f - ${plugins_name}/ | xz -9 --check=crc32 > ${TEMP_PATH}/plugins/${plugins_cat}/${plugins_name}/${plugins_cat}-${plugins_name}-${ULTRACOPIER_PLUGIN_VERSION}-mac-os-x.urc + fi + fi + fi + done + fi + cd ${TEMP_PATH}/${TARGET}-mac-os-x/${SUBFOLDER}/ + done +} + +compil "ultracopier" 0 0 0 0 0 +compil "ultracopier-ultimate" 0 1 0 0 0 +compil "ultracopier-debug" 1 0 0 0 0 + +compil_plugin "ultracopier" 0 "plugins-alternative" +compil_plugin "ultracopier" 0 "plugins" diff --git a/tools/to-pack/sub-script/sendmail.sh b/tools/to-pack/sub-script/sendmail.sh new file mode 100644 index 0000000..909972c --- /dev/null +++ b/tools/to-pack/sub-script/sendmail.sh @@ -0,0 +1,17 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi +if [ "${ULTRACOPIER_VERSION}" = "" ] +then + exit; +fi +SUPERCOPIER_VERSION=`echo "${ULTRACOPIER_VERSION}"` + +cd ${TEMP_PATH}/ + +echo "Send mail..." +/usr/bin/php /home/first-world.info/shop/sendmail_ultracopier_version.php ${ULTRACOPIER_VERSION} +echo "Send mail... done" diff --git a/tools/to-pack/sub-script/test.sh b/tools/to-pack/sub-script/test.sh new file mode 100644 index 0000000..782d462 --- /dev/null +++ b/tools/to-pack/sub-script/test.sh @@ -0,0 +1,40 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +cd ${TEMP_PATH}/ + +source ${BASE_PWD}/sub-script/compil.sh +source ${BASE_PWD}/sub-script/assemble.sh + +ARCHITECTURE="x86" +#compil "supercopier-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 0 0 0 0 1 0 +#assemble "supercopier" "${ARCHITECTURE}" 0 0 0 0 0 0 1 + + compil "ultracopier-debug-windows-x86" 1 0 0 0 32 "-mtune=generic -march=i686" 0 0 0 0 0 0 + assemble "ultracopier-debug" "${ARCHITECTURE}" 1 0 0 0 0 0 0 + #compil "ultracopier-debug-portable-windows-x86" 1 0 1 0 32 "-mtune=generic -march=i686" 0 0 0 0 0 0 + #assemble "ultracopier-debug-portable" "${ARCHITECTURE}" 1 0 1 0 0 0 0 + compil "ultracopier-portable-windows-x86" 0 0 1 0 32 "-mtune=generic -march=i686" 0 0 0 0 0 0 + assemble "ultracopier-portable" "${ARCHITECTURE}" 0 0 1 0 0 0 0 + #compil "ultracopier-portableapps-windows-x86" 0 0 1 1 32 "-mtune=generic -march=i686" 0 0 0 0 0 0 + #assemble "ultracopier-portableapps" "${ARCHITECTURE}" 0 0 1 0 0 0 0 + compil "ultracopier-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 0 0 0 0 0 0 + assemble "ultracopier" "${ARCHITECTURE}" 0 0 0 0 0 0 0 + #compil "ultracopier-debug-static-windows-x86" 1 0 0 0 32 "-mtune=generic -march=i686" 0 0 1 0 0 0 + #assemble "ultracopier-debug-static" "${ARCHITECTURE}" 1 0 0 0 1 0 0 + #compil "ultracopier-debug-portable-static-windows-x86" 1 0 1 0 32 "-mtune=generic -march=i686" 0 0 1 0 0 0 + #assemble "ultracopier-debug-portable-static" "${ARCHITECTURE}" 1 0 1 0 1 0 0 + #compil "ultracopier-portable-static-windows-x86" 0 0 1 0 32 "-mtune=generic -march=i686" 0 0 1 0 0 0 + #assemble "ultracopier-portable-static" "${ARCHITECTURE}" 0 0 1 0 1 0 0 + #compil "ultracopier-static-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 0 0 1 0 0 0 + #assemble "ultracopier-static" "${ARCHITECTURE}" 0 0 0 0 1 0 0 + compil "supercopier-ultimate-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 1 0 0 0 1 0 + assemble "supercopier-ultimate" "${ARCHITECTURE}" 0 0 0 1 0 0 1 + compil "supercopier-ultimate-cgminer-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 1 0 0 1 1 0 + assemble "supercopier-ultimate-cgminer" "${ARCHITECTURE}" 0 0 0 1 0 1 1 + #compil "supercopier-ultimate-cgminer-static-windows-x86" 0 0 0 0 32 "-mtune=generic -march=i686" 1 0 1 1 1 0 + #assemble "supercopier-ultimate-cgminer-static" "${ARCHITECTURE}" 0 0 0 1 1 1 1 diff --git a/tools/to-pack/sub-script/translation-local.sh b/tools/to-pack/sub-script/translation-local.sh new file mode 100644 index 0000000..2e56f15 --- /dev/null +++ b/tools/to-pack/sub-script/translation-local.sh @@ -0,0 +1,30 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +rm -Rf ${TEMP_PATH} + +cd ${ULTRACOPIER_SOURCE} +lupdate ultracopier-core.pro > /dev/null 2>&1 +lrelease -nounfinished -compress -removeidentical ultracopier-core.pro > /dev/null 2>&1 +PWD_BASE2=`pwd` +echo "update the .ts file" +for project in `find plugins/ plugins-alternative/ -maxdepth 2 -type d` +do + cd ${project}/ + for projectfile in `find ./ -name '*.pro' -type f` + do + if [ -f ${projectfile} ] + then + lupdate ${projectfile} > /dev/null 2>&1 + lrelease -nounfinished -compress -removeidentical ${projectfile} > /dev/null 2>&1 + fi + done + cd ${PWD_BASE2} +done + + + diff --git a/tools/to-pack/sub-script/translation.sh b/tools/to-pack/sub-script/translation.sh new file mode 100755 index 0000000..109e9b9 --- /dev/null +++ b/tools/to-pack/sub-script/translation.sh @@ -0,0 +1,53 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +TARGET="ultracopier-translation-${ULTRACOPIER_VERSION}" +rm -Rf ${TEMP_PATH}/${TARGET}/ +mkdir -p ${TEMP_PATH}/${TARGET}/ +cd ${ULTRACOPIERSOURCESPATH} +lupdate -no-obsolete ultracopier-core.pro > /dev/null 2>&1 +lrelease -nounfinished -compress -removeidentical ultracopier-core.pro > /dev/null 2>&1 +PWD_BASE2=`pwd` +echo "update the .ts file" +for project in `find plugins/ plugins-alternative/ -maxdepth 2 -type d` +do + cd ${project}/ + for projectfile in `find ./ -name '*.pro' -type f` + do + if [ -f ${projectfile} ] + then + lupdate ${projectfile} > /dev/null 2>&1 + lrelease -nounfinished -compress -removeidentical ${projectfile} > /dev/null 2>&1 + fi + done + cd ${PWD_BASE2} +done +echo "copy the .ts file" +for languages in `find ./ -name Languages -type d` +do + mkdir -p ${TEMP_PATH}/${TARGET}/${languages} + cp -aRf ${languages} ${TEMP_PATH}/${TARGET}/${languages}/../ +done +cd ../to-pack/ + +rm -Rf ${TEMP_PATH}/${TARGET}/*/*/Rsync > /dev/null 2>&1 +rm -Rf ${TEMP_PATH}/${TARGET}/plugins-alternative/CopyEngine > /dev/null 2>&1 +find ${TEMP_PATH}/${TARGET}/ -name "*.qm" -exec rm {} \; > /dev/null 2>&1 +find ${TEMP_PATH}/${TARGET}/ -name "Test" -type d -exec rm -Rf {} \; > /dev/null 2>&1 +mv ${TEMP_PATH}/${TARGET}/resources/Languages/en/ ${TEMP_PATH}/${TARGET}/plugins/Languages/en/ +find ${TEMP_PATH}/${TARGET}/ -type d -empty -delete > /dev/null 2>&1 +find ${TEMP_PATH}/${TARGET}/ -type d -empty -delete > /dev/null 2>&1 +find ${TEMP_PATH}/${TARGET}/ -type d -empty -delete > /dev/null 2>&1 +rm -Rf ${TEMP_PATH}/${TARGET}/resources/ + +cd ${TEMP_PATH}/ +tar cjf ${TARGET}.tar.bz2 ${TARGET}/ --owner=0 --group=0 --mtime='2010-01-01' -H ustar +if [ ! -e ${TARGET}.tar.bz2 ]; then + echo "${TARGET}.tar.bz2 not exists!"; + exit; +fi +rm -Rf ${TARGET}/ diff --git a/tools/to-pack/sub-script/upload-local.sh b/tools/to-pack/sub-script/upload-local.sh new file mode 100644 index 0000000..c42e055 --- /dev/null +++ b/tools/to-pack/sub-script/upload-local.sh @@ -0,0 +1,33 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi + +mkdir -p ${TEMP_PATH} +cd ${TEMP_PATH}/ + +rsync -avrtz --compress-level=9 --rsh='ssh -p54973' --partial --progress /mnt/world/ultracopier-temp/ultracopier-*.dmg root@ssh.first-world.info:/home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ --timeout=120 +RETURNA=$? +while [ ${RETURNA} -ne 0 ] && [ ${RETURNA} -ne 20 ] && [ ${RETURNA} -ne 255 ] +do + rsync -avrtz --compress-level=9 --rsh='ssh -p54973' --partial --progress /mnt/world/ultracopier-temp/ultracopier-*.dmg root@ssh.first-world.info:/home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ --timeout=120 + RETURNA=$? + echo ${RETURNA} +done + + +rsync -avrtzu --compress-level=9 --rsh='ssh -p54973' --partial --progress /mnt/world/ultracopier-temp/plugins/ root@ssh.first-world.info:/home/first-world.info/files-rw/ultracopier/plugins/ --timeout=120 +RETURNB=$? +while [ ${RETURNB} -ne 0 ] && [ ${RETURNB} -ne 20 ] && [ ${RETURNB} -ne 255 ] +do + rsync -avrtzu --compress-level=9 --rsh='ssh -p54973' --partial --progress /mnt/world/ultracopier-temp/plugins/ root@ssh.first-world.info:/home/first-world.info/files-rw/ultracopier/plugins/ --timeout=120 + RETURNB=$? + echo ${RETURNB} +done + +#if [ "${RETURNA}" -eq 0 ] && [ "${RETURNB}" -eq 0 ] +#then +# rm -Rf /mnt/world/ultracopier-temp/*.dmg /mnt/world/ultracopier-temp/*.tar.xz /mnt/world/ultracopier-temp/plugins/ +#fi diff --git a/tools/to-pack/sub-script/upload.sh b/tools/to-pack/sub-script/upload.sh new file mode 100644 index 0000000..f7c50df --- /dev/null +++ b/tools/to-pack/sub-script/upload.sh @@ -0,0 +1,80 @@ +#!/bin/bash + +if [ "${TEMP_PATH}" = "" ] +then + exit; +fi +if [ "${ULTRACOPIER_VERSION}" = "" ] +then + exit; +fi +SUPERCOPIER_VERSION=`echo "${ULTRACOPIER_VERSION}"` + +cd ${TEMP_PATH}/ + +echo "Move some elements..." +if [ -d ${TEMP_PATH}/doc/ ] +then + rsync -artu ${TEMP_PATH}/doc/ /home/first-world.info/doc-ultracopier/ + if [ $? -ne 0 ] + then + echo 'rsync failed' + exit; + fi + rm -Rf ${TEMP_PATH}/doc/ +fi +if [ -d ${TEMP_PATH}/plugins/ ] +then + rsync -artu ${TEMP_PATH}/plugins/ /home/first-world.info/files-rw/ultracopier/plugins/ + if [ $? -ne 0 ] + then + echo 'rsync failed' + exit; + fi + rm -Rf ${TEMP_PATH}/plugins/ +fi + +mkdir -p /home/first-world.info/files-rw/supercopier/${SUPERCOPIER_VERSION}/ +mv ${TEMP_PATH}/supercopier-*.zip /home/first-world.info/files-rw/supercopier/${SUPERCOPIER_VERSION}/ +mv ${TEMP_PATH}/supercopier-*-setup.exe /home/first-world.info/files-rw/supercopier/${SUPERCOPIER_VERSION}/ + +mkdir -p /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ +mv ${TEMP_PATH}/ultracopier-*.tar.xz /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ +mv ${TEMP_PATH}/ultracopier-*.zip /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ +mv ${TEMP_PATH}/ultracopier-*-setup.exe /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ +mv ${TEMP_PATH}/ultracopier-*.tar.bz2 /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ +cp ${BASE_PWD}/data/gentoo/ultracopier.ebuild /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ultracopier-${ULTRACOPIER_VERSION}.ebuild +echo "Move some elements... done" + +echo "Finalise some elements..." +chown lighttpd.lighttpd -Rf /home/first-world.info/doc-ultracopier/*/*/${ULTRACOPIER_VERSION}/ +chown lighttpd.lighttpd -Rf /home/first-world.info/files-rw/ultracopier/plugins/ +echo "Finalise some elements... done" + +echo "Upload to the shop..." +#cd /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ && rm -f /home/first-world.info/shop/download/09616e4ee15b7445c80704b934559f3af483abaa && nice -n 19 ionice -c 3 zip -9 -q /home/first-world.info/shop/download/09616e4ee15b7445c80704b934559f3af483abaa ultracopier-ultimate-*-x86-${ULTRACOPIER_VERSION}-setup.exe -x ultracopier-ultimate-cgminer-*-x86-${ULTRACOPIER_VERSION}-setup.exe && mv /home/first-world.info/shop/download/09616e4ee15b7445c80704b934559f3af483abaa.zip /home/first-world.info/shop/download/09616e4ee15b7445c80704b934559f3af483abaa +#cd /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ && rm -f /home/first-world.info/shop/download/e4039d2bc194fb68f3ac6319c63381eed1573632 && nice -n 19 ionice -c 3 zip -9 -q /home/first-world.info/shop/download/e4039d2bc194fb68f3ac6319c63381eed1573632 ultracopier-ultimate-*-x86_64-${ULTRACOPIER_VERSION}-setup.exe -x ultracopier-ultimate-cgminer-*-x86_64-${ULTRACOPIER_VERSION}-setup.exe && mv /home/first-world.info/shop/download/e4039d2bc194fb68f3ac6319c63381eed1573632.zip /home/first-world.info/shop/download/e4039d2bc194fb68f3ac6319c63381eed1573632 +#cp /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ultracopier-ultimate-mac-os-x-${ULTRACOPIER_VERSION}.dmg /home/first-world.info/shop/download/d6382b673f31a42c71101ed642fe69d3b39dba8a +#cd /home/first-world.info/files-rw/supercopier/${SUPERCOPIER_VERSION}/ && rm -f /home/first-world.info/shop/download/b5f718420c697ddb34d3dfae6cb2adfdfc860153 && nice -n 19 ionice -c 3 zip -9 -q /home/first-world.info/shop/download/b5f718420c697ddb34d3dfae6cb2adfdfc860153 supercopier-ultimate-*${SUPERCOPIER_VERSION}* -x supercopier-ultimate-cgminer-*${SUPERCOPIER_VERSION}* && mv /home/first-world.info/shop/download/b5f718420c697ddb34d3dfae6cb2adfdfc860153.zip /home/first-world.info/shop/download/b5f718420c697ddb34d3dfae6cb2adfdfc860153 + +#cd /home/first-world.info/files-rw/ultracopier/plugins/Themes/Teracopy/ && rm -f /home/first-world.info/shop/download/161e15b3dfd41a1c4fc265d8d2d856a07e8df559 && nice -n 19 ionice -c 3 zip -9 -q /home/first-world.info/shop/download/161e15b3dfd41a1c4fc265d8d2d856a07e8df559 *${ULTRACOPIER_VERSION}*-x86_64.urc *${ULTRACOPIER_VERSION}*-x86.urc *${ULTRACOPIER_VERSION}*-mac-os-x.urc && mv /home/first-world.info/shop/download/161e15b3dfd41a1c4fc265d8d2d856a07e8df559.zip /home/first-world.info/shop/download/161e15b3dfd41a1c4fc265d8d2d856a07e8df559 +#cd /home/first-world.info/files-rw/ultracopier/plugins/CopyEngine/Rsync/ && rm -f /home/first-world.info/shop/download/7fee8026fb4f7d9bfcb9790dfa0db25a514f79da && nice -n 19 ionice -c 3 zip -9 -q /home/first-world.info/shop/download/7fee8026fb4f7d9bfcb9790dfa0db25a514f79da *${ULTRACOPIER_VERSION}*-x86_64.urc *${ULTRACOPIER_VERSION}*-x86.urc *${ULTRACOPIER_VERSION}*-mac-os-x.urc && mv /home/first-world.info/shop/download/7fee8026fb4f7d9bfcb9790dfa0db25a514f79da.zip /home/first-world.info/shop/download/7fee8026fb4f7d9bfcb9790dfa0db25a514f79da +#cd /home/first-world.info/files-rw/ultracopier/plugins/Themes/Windows/ && rm -f /home/first-world.info/shop/download/59c9fb956fedf4d7a6ef6fe84371882bc5591256 && nice -n 19 ionice -c 3 zip -9 -q /home/first-world.info/shop/download/59c9fb956fedf4d7a6ef6fe84371882bc5591256 *${ULTRACOPIER_VERSION}*-x86_64.urc *${ULTRACOPIER_VERSION}*-x86.urc *${ULTRACOPIER_VERSION}*-mac-os-x.urc && mv /home/first-world.info/shop/download/59c9fb956fedf4d7a6ef6fe84371882bc5591256.zip /home/first-world.info/shop/download/59c9fb956fedf4d7a6ef6fe84371882bc5591256 +#cd /home/first-world.info/files-rw/ultracopier/plugins/Themes/Supercopier/ && rm -f /home/first-world.info/shop/download/c3386f6d227585eb9672fff25b5865208a451cc3 && nice -n 19 ionice -c 3 zip -9 -q /home/first-world.info/shop/download/c3386f6d227585eb9672fff25b5865208a451cc3 *${ULTRACOPIER_VERSION}*-x86_64.urc *${ULTRACOPIER_VERSION}*-x86.urc *${ULTRACOPIER_VERSION}*-mac-os-x.urc && mv /home/first-world.info/shop/download/c3386f6d227585eb9672fff25b5865208a451cc3.zip /home/first-world.info/shop/download/c3386f6d227585eb9672fff25b5865208a451cc3 + +/usr/bin/php /home/first-world.info/shop/update_ultracopier_version.php ${ULTRACOPIER_VERSION} +echo "Upload to the shop... done" + +echo "Clean the ultimate version..." +#mv /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ultracopier-ultimate-* ${TEMP_PATH}/ +#mv ${TEMP_PATH}/ultracopier-ultimate-cgminer-windows-x86* /home/first-world.info/files-rw/ultracopier/${ULTRACOPIER_VERSION}/ +#mv /home/first-world.info/files-rw/supercopier/${SUPERCOPIER_VERSION}/supercopier-ultimate-* ${TEMP_PATH}/ +#mv ${TEMP_PATH}/supercopier-ultimate-cgminer-windows-x86* /home/first-world.info/files-rw/supercopier/${SUPERCOPIER_VERSION}/ +rm -Rf ${TEMP_PATH}/* +echo "Clean the ultimate version... done" + +echo "Change the static files..." +echo ${ULTRACOPIER_VERSION} > /home/first-world.info/ultracopier/updater.txt +echo ${ULTRACOPIER_VERSION} > /home/first-world.info/ultracopier-update/updater.txt +/etc/init.d/lighttpd restart +echo "Change the static files... done" diff --git a/tools/to-pack/test.sh b/tools/to-pack/test.sh new file mode 100755 index 0000000..14245a4 --- /dev/null +++ b/tools/to-pack/test.sh @@ -0,0 +1,55 @@ +#!/bin/bash +export TEMP_PATH="/home/ultracopier-temp/" +export WINEBASEPATH="/home/wine/" +export ULTRACOPIERSOURCESPATH="/root/ultracopier/sources/" +export BASE_PWD=`pwd` + +export ULTRACOPIER_VERSION=`grep -F "ULTRACOPIER_VERSION" ${ULTRACOPIERSOURCESPATH}/Variable.h | grep -F "1.4" | sed -r "s/^.*([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*$/\1/g"` +function valid_ip() +{ + local ip=$1 + local stat=1 + if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? + fi + return $stat +} +if ! valid_ip ${ULTRACOPIER_VERSION}; then + echo Wrong version: ${ULTRACOPIER_VERSION} + exit +fi +echo Version: ${ULTRACOPIER_VERSION} + +rm -Rf ${TEMP_PATH} > /dev/null 2>&1 +rm -Rf ${ULTRACOPIERSOURCESPATH}/plugins-alternative/CopyEngine/Ultracopier/ > /dev/null 2>&1 +mkdir -p ${TEMP_PATH} +find ../ -name "Thumbs.db" -exec rm {} \; >> /dev/null 2>&1 +find ../ -name ".directory" -exec rm {} \; >> /dev/null 2>&1 + +echo "Do the test folder..." +source sub-script/test.sh +cd ${BASE_PWD} +echo "Do the test folder... done" + +./4-clean-all.sh +rm /home/first-world.info/ultracopier/temp/* + + +if [ -f ${TEMP_PATH}/*.7z ] +then + cp /home/ultracopier-temp/*.7z /home/first-world.info/ultracopier/temp/ +fi +if [ -f ${TEMP_PATH}/*.zip ] +then + cp /home/ultracopier-temp/*.zip /home/first-world.info/ultracopier/temp/ +fi +if [ -f ${TEMP_PATH}/*-setup.exe ] +then + cp /home/ultracopier-temp/*-setup.exe /home/first-world.info/ultracopier/temp/ +fi diff --git a/tools/unit-tester/copyEngine.cpp b/tools/unit-tester/copyEngine.cpp new file mode 100644 index 0000000..f74361d --- /dev/null +++ b/tools/unit-tester/copyEngine.cpp @@ -0,0 +1,1386 @@ +/** \file copyEngine.cpp +\brief Define the copy engine +\author alpha_one_x86 +*/ + +#include "copyEngine.h" +#include "folderExistsDialog.h" +#include "../../../interface/PluginInterface_CopyEngine.h" + +copyEngine::copyEngine(const QString &path,const QList<SupportedTest> &tests) +{ + listThread=new ListThread(facilityEngine); + this->facilityEngine=facilityEngine; + filters=NULL; + renamingRules=NULL; + + interface = NULL; + tempWidget = NULL; + uiIsInstalled = false; + dialogIsOpen = false; + maxSpeed = 0; + alwaysDoThisActionForFileExists = FileExists_NotSet; + alwaysDoThisActionForFileError = FileError_NotSet; + checkDestinationFolderExists = false; + stopIt = false; + size_for_speed = 0; + forcedMode = false; + + //implement the SingleShot in this class + //timerActionDone.setSingleShot(true); + timerActionDone.setInterval(ULTRACOPIER_PLUGIN_TIME_UPDATE_TRASNFER_LIST); + //timerProgression.setSingleShot(true); + timerProgression.setInterval(ULTRACOPIER_PLUGIN_TIME_UPDATE_PROGRESSION); + +} + +copyEngine::~copyEngine() +{ + /*if(filters!=NULL) + delete filters; + if(renamingRules!=NULL) + delete renamingRules; + destroyed by the widget parent, here the interface + */ + stopIt=true; + delete listThread; + delete ui; +} + +void copyEngine::connectTheSignalsSlots() +{ + #ifdef ULTRACOPIER_PLUGIN_DEBUG_WINDOW + debugDialogWindow.show(); + #endif + if(!connect(listThread,&ListThread::actionInProgess, this,©Engine::actionInProgess, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect actionInProgess()"); + if(!connect(listThread,&ListThread::actionInProgess, this,©Engine::newActionInProgess, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect actionInProgess() to slot"); + if(!connect(listThread,&ListThread::newFolderListing, this,©Engine::newFolderListing, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect newFolderListing()"); + if(!connect(listThread,&ListThread::newCollisionAction, this,©Engine::newCollisionAction, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect newCollisionAction()"); + if(!connect(listThread,&ListThread::newErrorAction, this,©Engine::newErrorAction, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect newErrorAction()"); + if(!connect(listThread,&ListThread::isInPause, this,©Engine::isInPause, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect isInPause()"); + if(!connect(listThread,&ListThread::error, this,©Engine::error, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect error()"); + if(!connect(listThread,&ListThread::rmPath, this,©Engine::rmPath, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect rmPath()"); + if(!connect(listThread,&ListThread::mkPath, this,©Engine::mkPath, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect mkPath()"); + if(!connect(listThread,&ListThread::newActionOnList, this,©Engine::newActionOnList, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect newActionOnList()"); + if(!connect(listThread,&ListThread::pushFileProgression, this,©Engine::pushFileProgression, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect pushFileProgression()"); + if(!connect(listThread,&ListThread::pushGeneralProgression, this,©Engine::pushGeneralProgression, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect pushGeneralProgression()"); + if(!connect(listThread,&ListThread::syncReady, this,©Engine::syncReady, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect syncReady()"); + if(!connect(listThread,&ListThread::canBeDeleted, this,©Engine::canBeDeleted, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect canBeDeleted()"); + #ifdef ULTRACOPIER_PLUGIN_DEBUG_WINDOW + if(!connect(listThread,&ListThread::debugInformation, this,©Engine::debugInformation, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect debugInformation()"); + #endif + + if(!connect(listThread,&ListThread::send_fileAlreadyExists, this,©Engine::fileAlreadyExistsSlot, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect send_fileAlreadyExists()"); + if(!connect(listThread,&ListThread::send_errorOnFile, this,©Engine::errorOnFileSlot, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect send_errorOnFile()"); + if(!connect(listThread,&ListThread::send_folderAlreadyExists, this,©Engine::folderAlreadyExistsSlot, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect send_folderAlreadyExists()"); + if(!connect(listThread,&ListThread::send_errorOnFolder, this,©Engine::errorOnFolderSlot, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect send_errorOnFolder()"); + if(!connect(listThread,&ListThread::updateTheDebugInfo, this,©Engine::updateTheDebugInfo, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect updateTheDebugInfo()"); + if(!connect(listThread,&ListThread::errorTransferList, this,©Engine::errorTransferList, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect errorTransferList()"); + if(!connect(listThread,&ListThread::warningTransferList, this,©Engine::warningTransferList, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect warningTransferList()"); + if(!connect(listThread,&ListThread::mkPathErrorOnFolder, this,©Engine::mkPathErrorOnFolderSlot, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect mkPathErrorOnFolder()"); + if(!connect(listThread,&ListThread::rmPathErrorOnFolder, this,©Engine::rmPathErrorOnFolderSlot, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect rmPathErrorOnFolder()"); + if(!connect(listThread,&ListThread::send_realBytesTransfered, this,©Engine::get_realBytesTransfered, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect send_realBytesTransfered()"); + + if(!connect(this,©Engine::tryCancel, listThread,&ListThread::tryCancel, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect tryCancel()"); + if(!connect(this,©Engine::signal_pause, listThread,&ListThread::pause, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_pause()"); + if(!connect(this,©Engine::signal_resume, listThread,&ListThread::resume, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_resume()"); + if(!connect(this,©Engine::signal_skip, listThread,&ListThread::skip, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_skip()"); + if(!connect(this,©Engine::signal_setCollisionAction, listThread,&ListThread::setAlwaysFileExistsAction, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_setCollisionAction()"); + if(!connect(this,©Engine::signal_setFolderColision, listThread,&ListThread::setFolderColision, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_setFolderColision()"); + if(!connect(this,©Engine::signal_removeItems, listThread,&ListThread::removeItems, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_removeItems()"); + if(!connect(this,©Engine::signal_moveItemsOnTop, listThread,&ListThread::moveItemsOnTop, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_moveItemsOnTop()"); + if(!connect(this,©Engine::signal_moveItemsUp, listThread,&ListThread::moveItemsUp, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_moveItemsUp()"); + if(!connect(this,©Engine::signal_moveItemsDown, listThread,&ListThread::moveItemsDown, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_moveItemsDown()"); + if(!connect(this,©Engine::signal_moveItemsOnBottom, listThread,&ListThread::moveItemsOnBottom, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_moveItemsOnBottom()"); + if(!connect(this,©Engine::signal_exportTransferList, listThread,&ListThread::exportTransferList, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_exportTransferList()"); + if(!connect(this,©Engine::signal_importTransferList, listThread,&ListThread::importTransferList, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_importTransferList()"); + if(!connect(this,©Engine::signal_forceMode, listThread,&ListThread::forceMode, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect signal_forceMode()"); + if(!connect(this,©Engine::send_osBufferLimit, listThread,&ListThread::set_osBufferLimit, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect send_osBufferLimit()"); + if(!connect(this,©Engine::send_setFilters,listThread,&ListThread::set_setFilters, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect send_setFilters()"); + if(!connect(this,©Engine::send_sendNewRenamingRules,listThread,&ListThread::set_sendNewRenamingRules, Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect send_sendNewRenamingRules()"); + if(!connect(&timerActionDone,&QTimer::timeout, listThread,&ListThread::sendActionDone)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect timerActionDone"); + if(!connect(&timerProgression,&QTimer::timeout, listThread,&ListThread::sendProgression)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect timerProgression"); + + if(!connect(this,©Engine::queryOneNewDialog,this,©Engine::showOneNewDialog,Qt::QueuedConnection)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect queryOneNewDialog()"); +} + +#ifdef ULTRACOPIER_PLUGIN_DEBUG_WINDOW +void copyEngine::updateTheDebugInfo(QStringList newList,QStringList newList2,int numberOfInodeOperation) +{ + debugDialogWindow.setTransferThreadList(newList); + debugDialogWindow.setTransferList(newList2); + debugDialogWindow.setInodeUsage(numberOfInodeOperation); +} +#endif + +//to send the options panel +bool copyEngine::getOptionsEngine(QWidget * tempWidget) +{ + this->tempWidget=tempWidget; + ui->setupUi(tempWidget); + connect(tempWidget, &QWidget::destroyed, this, ©Engine::resetTempWidget); + //conect the ui widget +/* connect(ui->doRightTransfer, &QCheckBox::toggled, &threadOfTheTransfer, ©Engine::setRightTransfer); + connect(ui->keepDate, &QCheckBox::toggled, &threadOfTheTransfer, ©Engine::setKeepDate); + connect(ui->blockSize, &QCheckBox::valueChanged, &threadOfTheTransfer, ©Engine::setBlockSize);*/ + connect(ui->autoStart, &QCheckBox::toggled, this, ©Engine::setAutoStart); + connect(ui->checkBoxDestinationFolderExists, &QCheckBox::toggled,this, ©Engine::setCheckDestinationFolderExists); + uiIsInstalled=true; + setRightTransfer(doRightTransfer); + setKeepDate(keepDate); + setSpeedLimitation(maxSpeed); + setBlockSize(blockSize); + setAutoStart(autoStart); + setCheckDestinationFolderExists(checkDestinationFolderExists); + set_doChecksum(doChecksum); + set_checksumIgnoreIfImpossible(checksumIgnoreIfImpossible); + set_checksumOnlyOnError(checksumOnlyOnError); + set_osBuffer(osBuffer); + set_osBufferLimited(osBufferLimited); + set_osBufferLimit(osBufferLimit); + return true; +} + +//to have interface widget to do modal dialog +void copyEngine::setInterfacePointer(QWidget * interface) +{ + this->interface=interface; + filters=new Filters(tempWidget); + renamingRules=new RenamingRules(tempWidget); + + if(uiIsInstalled) + { + connect(ui->doRightTransfer, &QCheckBox::toggled, this,©Engine::setRightTransfer); + connect(ui->keepDate, &QCheckBox::toggled, this,©Engine::setKeepDate); + connect(ui->blockSize, static_cast<void(QSpinBox::*)(int)>(&QSpinBox::valueChanged), this,©Engine::setBlockSize); + connect(ui->autoStart, &QCheckBox::toggled, this,©Engine::setAutoStart); + connect(ui->doChecksum, &QCheckBox::toggled, this,©Engine::doChecksum_toggled); + connect(ui->checksumIgnoreIfImpossible, &QCheckBox::toggled, this,©Engine::checksumIgnoreIfImpossible_toggled); + connect(ui->checksumOnlyOnError, &QCheckBox::toggled, this,©Engine::checksumOnlyOnError_toggled); + connect(ui->osBuffer, &QCheckBox::toggled, this,©Engine::osBuffer_toggled); + connect(ui->osBufferLimited, &QCheckBox::toggled, this,©Engine::osBufferLimited_toggled); + connect(ui->osBufferLimit, &QSpinBox::editingFinished, this,©Engine::osBufferLimit_editingFinished); + + connect(filters,&Filters::haveNewFilters,this,©Engine::sendNewFilters); + connect(ui->filters,&QPushButton::clicked,this,©Engine::showFilterDialog); + + if(!connect(renamingRules,&RenamingRules::sendNewRenamingRules,this,©Engine::sendNewRenamingRules)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect sendNewRenamingRules()"); + if(!connect(ui->renamingRules,&QPushButton::clicked,this,©Engine::showRenamingRules)) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to connect renamingRules.clicked()"); + } + + filters->setFilters(includeStrings,includeOptions,excludeStrings,excludeOptions); + set_setFilters(includeStrings,includeOptions,excludeStrings,excludeOptions); + + renamingRules->setRenamingRules(firstRenamingRule,otherRenamingRule); + emit send_sendNewRenamingRules(firstRenamingRule,otherRenamingRule); +} + +bool copyEngine::haveSameSource(const QStringList &sources) +{ + return listThread->haveSameSource(sources); +} + +bool copyEngine::haveSameDestination(const QString &destination) +{ + return listThread->haveSameDestination(destination); +} + +bool copyEngine::newCopy(const QStringList &sources) +{ + if(forcedMode && mode!=Copy) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,"The engine is forced to move, you can't copy with it"); + QMessageBox::critical(NULL,facilityEngine->translateText("Internal error"),tr("The engine is forced to move, you can't copy with it")); + return false; + } + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"start"); + QString destination = QFileDialog::getExistingDirectory(interface,facilityEngine->translateText("Select destination directory"),"",QFileDialog::ShowDirsOnly | QFileDialog::DontResolveSymlinks); + if(destination.isEmpty() || destination.isNull() || destination=="") + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Information,"Canceled by the user"); + return false; + } + return listThread->newCopy(sources,destination); +} + +bool copyEngine::newCopy(const QStringList &sources,const QString &destination) +{ + if(forcedMode && mode!=Copy) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,"The engine is forced to move, you can't copy with it"); + QMessageBox::critical(NULL,facilityEngine->translateText("Internal error"),tr("The engine is forced to move, you can't copy with it")); + return false; + } + return listThread->newCopy(sources,destination); +} + +bool copyEngine::newMove(const QStringList &sources) +{ + if(forcedMode && mode!=Move) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,"The engine is forced to copy, you can't move with it"); + QMessageBox::critical(NULL,facilityEngine->translateText("Internal error"),tr("The engine is forced to copy, you can't move with it")); + return false; + } + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"start"); + QString destination = QFileDialog::getExistingDirectory(interface,facilityEngine->translateText("Select destination directory"),"",QFileDialog::ShowDirsOnly | QFileDialog::DontResolveSymlinks); + if(destination.isEmpty() || destination.isNull() || destination=="") + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Information,"Canceled by the user"); + return false; + } + return listThread->newMove(sources,destination); +} + +bool copyEngine::newMove(const QStringList &sources,const QString &destination) +{ + if(forcedMode && mode!=Move) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,"The engine is forced to copy, you can't move with it"); + QMessageBox::critical(NULL,facilityEngine->translateText("Internal error"),tr("The engine is forced to copy, you can't move with it")); + return false; + } + return listThread->newMove(sources,destination); +} + +void copyEngine::newTransferList(const QString &file) +{ + emit signal_importTransferList(file); +} + +//because direct access to list thread into the main thread can't be do +quint64 copyEngine::realByteTransfered() +{ + return size_for_speed; +} + +//speed limitation +qint64 copyEngine::getSpeedLimitation() +{ + return listThread->getSpeedLimitation(); +} + +//get collision action +QList<QPair<QString,QString> > copyEngine::getCollisionAction() +{ + QPair<QString,QString> tempItem; + QList<QPair<QString,QString> > list; + tempItem.first=facilityEngine->translateText("Ask");tempItem.second="ask";list << tempItem; + tempItem.first=facilityEngine->translateText("Skip");tempItem.second="skip";list << tempItem; + tempItem.first=facilityEngine->translateText("Overwrite");tempItem.second="overwrite";list << tempItem; + tempItem.first=facilityEngine->translateText("Overwrite if newer");tempItem.second="overwriteIfNewer";list << tempItem; + tempItem.first=facilityEngine->translateText("Overwrite if the last modification dates are different");tempItem.second="overwriteIfNotSameModificationDate";list << tempItem; + tempItem.first=facilityEngine->translateText("Rename");tempItem.second="rename";list << tempItem; + return list; +} + +QList<QPair<QString,QString> > copyEngine::getErrorAction() +{ + QPair<QString,QString> tempItem; + QList<QPair<QString,QString> > list; + tempItem.first=facilityEngine->translateText("Ask");tempItem.second="ask";list << tempItem; + tempItem.first=facilityEngine->translateText("Skip");tempItem.second="skip";list << tempItem; + tempItem.first=facilityEngine->translateText("Put to end of the list");tempItem.second="putToEndOfTheList";list << tempItem; + return list; +} + +void copyEngine::setDrive(const QStringList &drives) +{ + listThread->setDrive(drives); +} + +/** \brief to sync the transfer list + * Used when the interface is changed, useful to minimize the memory size */ +void copyEngine::syncTransferList() +{ + listThread->syncTransferList(); +} + +void copyEngine::set_doChecksum(bool doChecksum) +{ + listThread->set_doChecksum(doChecksum); + if(uiIsInstalled) + { + ui->doChecksum->setChecked(doChecksum); + ui->checksumOnlyOnError->setEnabled(ui->doChecksum->isChecked()); + ui->checksumIgnoreIfImpossible->setEnabled(ui->doChecksum->isChecked()); + } + this->doChecksum=doChecksum; +} + +void copyEngine::set_checksumIgnoreIfImpossible(bool checksumIgnoreIfImpossible) +{ + listThread->set_checksumIgnoreIfImpossible(checksumIgnoreIfImpossible); + if(uiIsInstalled) + ui->checksumIgnoreIfImpossible->setChecked(checksumIgnoreIfImpossible); + this->checksumIgnoreIfImpossible=checksumIgnoreIfImpossible; +} + +void copyEngine::set_checksumOnlyOnError(bool checksumOnlyOnError) +{ + listThread->set_checksumOnlyOnError(checksumOnlyOnError); + if(uiIsInstalled) + ui->checksumOnlyOnError->setChecked(checksumOnlyOnError); + this->checksumOnlyOnError=checksumOnlyOnError; +} + +void copyEngine::set_osBuffer(bool osBuffer) +{ + listThread->set_osBuffer(osBuffer); + if(uiIsInstalled) + { + ui->osBuffer->setChecked(osBuffer); + updateBufferCheckbox(); + } + this->osBuffer=osBuffer; +} + +void copyEngine::set_osBufferLimited(bool osBufferLimited) +{ + listThread->set_osBufferLimited(osBufferLimited); + if(uiIsInstalled) + { + ui->osBufferLimited->setChecked(osBufferLimited); + updateBufferCheckbox(); + } + this->osBufferLimited=osBufferLimited; +} + +void copyEngine::set_osBufferLimit(unsigned int osBufferLimit) +{ + emit send_osBufferLimit(osBufferLimit); + if(uiIsInstalled) + ui->osBufferLimit->setValue(osBufferLimit); + this->osBufferLimit=osBufferLimit; +} + +void copyEngine::updateBufferCheckbox() +{ + ui->osBufferLimited->setEnabled(ui->osBuffer->isChecked()); + ui->osBufferLimit->setEnabled(ui->osBuffer->isChecked() && ui->osBufferLimited->isChecked()); +} + +void copyEngine::set_setFilters(QStringList includeStrings,QStringList includeOptions,QStringList excludeStrings,QStringList excludeOptions) +{ + if(filters!=NULL) + { + filters->setFilters(includeStrings,includeOptions,excludeStrings,excludeOptions); + emit send_setFilters(filters->getInclude(),filters->getExclude()); + } + this->includeStrings=includeStrings; + this->includeOptions=includeOptions; + this->excludeStrings=excludeStrings; + this->excludeOptions=excludeOptions; +} + +void copyEngine::setRenamingRules(QString firstRenamingRule,QString otherRenamingRule) +{ + sendNewRenamingRules(firstRenamingRule,otherRenamingRule); +} + +bool copyEngine::userAddFolder(const CopyMode &mode) +{ + QString source = QFileDialog::getExistingDirectory(interface,facilityEngine->translateText("Select source directory"),"",QFileDialog::ShowDirsOnly | QFileDialog::DontResolveSymlinks); + if(source.isEmpty() || source.isNull() || source=="") + return false; + if(mode==Copy) + return newCopy(QStringList() << source); + else + return newMove(QStringList() << source); +} + +bool copyEngine::userAddFile(const CopyMode &mode) +{ + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"start"); + QStringList sources = QFileDialog::getOpenFileNames( + interface, + facilityEngine->translateText("Select one or more files to open"), + "", + facilityEngine->translateText("All files")+" (*)"); + if(sources.isEmpty()) + return false; + if(mode==Copy) + return newCopy(sources); + else + return newMove(sources); +} + +void copyEngine::pause() +{ + emit signal_pause(); +} + +void copyEngine::resume() +{ + emit signal_resume(); +} + +void copyEngine::skip(const quint64 &id) +{ + emit signal_skip(id); +} + +void copyEngine::cancel() +{ + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"start"); + stopIt=true; + timerProgression.stop(); + timerActionDone.stop(); + emit tryCancel(); +} + +void copyEngine::removeItems(const QList<int> &ids) +{ + emit signal_removeItems(ids); +} + +void copyEngine::moveItemsOnTop(const QList<int> &ids) +{ + emit signal_moveItemsOnTop(ids); +} + +void copyEngine::moveItemsUp(const QList<int> &ids) +{ + emit signal_moveItemsUp(ids); +} + +void copyEngine::moveItemsDown(const QList<int> &ids) +{ + emit signal_moveItemsDown(ids); +} + +void copyEngine::moveItemsOnBottom(const QList<int> &ids) +{ + emit signal_moveItemsOnBottom(ids); +} + +/** \brief give the forced mode, to export/import transfer list */ +void copyEngine::forceMode(const CopyMode &mode) +{ + if(forcedMode) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,QString("Mode forced previously")); + QMessageBox::critical(NULL,facilityEngine->translateText("Internal error"),tr("The mode have been forced previously, it's internal error, please report it")); + return; + } + if(mode==Copy) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,QString("Force mode to copy")); + else + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,QString("Force mode to move")); + this->mode=mode; + forcedMode=true; + emit signal_forceMode(mode); +} + +void copyEngine::exportTransferList() +{ + QString fileName = QFileDialog::getSaveFileName(NULL,facilityEngine->translateText("Save transfer list"),"transfer-list.lst",facilityEngine->translateText("Transfer list")+" (*.lst)"); + if(fileName.isEmpty()) + return; + emit signal_exportTransferList(fileName); +} + +void copyEngine::importTransferList() +{ + QString fileName = QFileDialog::getOpenFileName(NULL,facilityEngine->translateText("Open transfer list"),"transfer-list.lst",facilityEngine->translateText("Transfer list")+" (*.lst)"); + if(fileName.isEmpty()) + return; + emit signal_importTransferList(fileName); +} + +void copyEngine::warningTransferList(const QString &warning) +{ + QMessageBox::warning(interface,facilityEngine->translateText("Error"),warning); +} + +void copyEngine::errorTransferList(const QString &error) +{ + QMessageBox::critical(interface,facilityEngine->translateText("Error"),error); +} + +bool copyEngine::setSpeedLimitation(const qint64 &speedLimitation) +{ + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"maxSpeed: "+QString::number(speedLimitation)); + maxSpeed=speedLimitation; + return listThread->setSpeedLimitation(speedLimitation); +} + +void copyEngine::setCollisionAction(const QString &action) +{ + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"action: "+action); + if(action=="skip") + alwaysDoThisActionForFileExists=FileExists_Skip; + else if(action=="overwrite") + alwaysDoThisActionForFileExists=FileExists_Overwrite; + else if(action=="overwriteIfNewer") + alwaysDoThisActionForFileExists=FileExists_OverwriteIfNewer; + else if(action=="overwriteIfNotSameModificationDate") + alwaysDoThisActionForFileExists=FileExists_OverwriteIfNotSameModificationDate; + else if(action=="rename") + alwaysDoThisActionForFileExists=FileExists_Rename; + else + alwaysDoThisActionForFileExists=FileExists_NotSet; + emit signal_setCollisionAction(alwaysDoThisActionForFileExists); +} + +void copyEngine::setErrorAction(const QString &action) +{ + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"action: "+action); + if(action=="skip") + alwaysDoThisActionForFileError=FileError_Skip; + else if(action=="putToEndOfTheList") + alwaysDoThisActionForFileError=FileError_PutToEndOfTheList; + else + alwaysDoThisActionForFileError=FileError_NotSet; +} + +void copyEngine::setRightTransfer(const bool doRightTransfer) +{ + this->doRightTransfer=doRightTransfer; + if(uiIsInstalled) + ui->doRightTransfer->setChecked(doRightTransfer); + listThread->setRightTransfer(doRightTransfer); +} + +//set keep date +void copyEngine::setKeepDate(const bool keepDate) +{ + this->keepDate=keepDate; + if(uiIsInstalled) + ui->keepDate->setChecked(keepDate); + listThread->setKeepDate(keepDate); +} + +//set block size in KB +void copyEngine::setBlockSize(const int blockSize) +{ + this->blockSize=blockSize; + if(uiIsInstalled) + ui->blockSize->setValue(blockSize); + listThread->setBlockSize(blockSize); +} + +//set auto start +void copyEngine::setAutoStart(const bool autoStart) +{ + this->autoStart=autoStart; + if(uiIsInstalled) + ui->autoStart->setChecked(autoStart); + listThread->setAutoStart(autoStart); +} + +//set check destination folder +void copyEngine::setCheckDestinationFolderExists(const bool checkDestinationFolderExists) +{ + this->checkDestinationFolderExists=checkDestinationFolderExists; + if(uiIsInstalled) + ui->checkBoxDestinationFolderExists->setChecked(checkDestinationFolderExists); + listThread->setCheckDestinationFolderExists(checkDestinationFolderExists); +} + +//reset widget +void copyEngine::resetTempWidget() +{ + tempWidget=NULL; +} + +void copyEngine::on_comboBoxFolderColision_currentIndexChanged(int index) +{ + switch(index) + { + case 0: + setComboBoxFolderColision(FolderExists_NotSet,false); + break; + case 1: + setComboBoxFolderColision(FolderExists_Merge,false); + break; + case 2: + setComboBoxFolderColision(FolderExists_Skip,false); + break; + case 3: + setComboBoxFolderColision(FolderExists_Rename,false); + break; + } +} + +void copyEngine::on_comboBoxFolderError_currentIndexChanged(int index) +{ + switch(index) + { + case 0: + setComboBoxFolderError(FileError_NotSet,false); + break; + case 1: + setComboBoxFolderError(FileError_Skip,false); + break; + } +} + +//set the translate +void copyEngine::newLanguageLoaded() +{ + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"start, retranslate the widget options"); + if(tempWidget!=NULL) + ui->retranslateUi(tempWidget); + else + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Information,"ui not loaded!"); +} + +void copyEngine::setComboBoxFolderColision(FolderExistsAction action,bool changeComboBox) +{ + alwaysDoThisActionForFolderExists=action; + emit signal_setFolderColision(alwaysDoThisActionForFolderExists); + if(!changeComboBox || !uiIsInstalled) + return; + switch(action) + { + case FolderExists_Merge: + ui->comboBoxFolderColision->setCurrentIndex(1); + break; + case FolderExists_Skip: + ui->comboBoxFolderColision->setCurrentIndex(2); + break; + case FolderExists_Rename: + ui->comboBoxFolderColision->setCurrentIndex(3); + break; + default: + ui->comboBoxFolderColision->setCurrentIndex(0); + break; + } +} + +void copyEngine::setComboBoxFolderError(FileErrorAction action,bool changeComboBox) +{ + alwaysDoThisActionForFileError=action; + if(!changeComboBox || !uiIsInstalled) + return; + switch(action) + { + case FileError_Skip: + ui->comboBoxFolderError->setCurrentIndex(1); + break; + default: + ui->comboBoxFolderError->setCurrentIndex(0); + break; + } +} + +void copyEngine::doChecksum_toggled(bool doChecksum) +{ + listThread->set_doChecksum(doChecksum); +} + +void copyEngine::checksumOnlyOnError_toggled(bool checksumOnlyOnError) +{ + listThread->set_checksumOnlyOnError(checksumOnlyOnError); +} + +void copyEngine::checksumIgnoreIfImpossible_toggled(bool checksumIgnoreIfImpossible) +{ + listThread->set_checksumIgnoreIfImpossible(checksumIgnoreIfImpossible); +} + +void copyEngine::osBuffer_toggled(bool osBuffer) +{ + listThread->set_osBuffer(osBuffer); + updateBufferCheckbox(); +} + +void copyEngine::osBufferLimited_toggled(bool osBufferLimited) +{ + listThread->set_osBufferLimited(osBufferLimited); + updateBufferCheckbox(); +} + +void copyEngine::osBufferLimit_editingFinished() +{ + emit send_osBufferLimit(ui->osBufferLimit->value()); +} + +void copyEngine::showFilterDialog() +{ + if(filters!=NULL) + filters->exec(); +} + +void copyEngine::sendNewFilters() +{ + if(filters!=NULL) + emit send_setFilters(filters->getInclude(),filters->getExclude()); +} + +void copyEngine::sendNewRenamingRules(QString firstRenamingRule,QString otherRenamingRule) +{ + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"new filter"); + this->firstRenamingRule=firstRenamingRule; + this->otherRenamingRule=otherRenamingRule; + emit send_sendNewRenamingRules(firstRenamingRule,otherRenamingRule); +} + +void copyEngine::showRenamingRules() +{ + if(renamingRules==NULL) + { + QMessageBox::critical(NULL,tr("Options error"),tr("Options engine is not loaded, can't access to the filters")); + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"options not loaded"); + return; + } + renamingRules->exec(); +} + +void copyEngine::get_realBytesTransfered(quint64 realBytesTransfered) +{ + size_for_speed=realBytesTransfered; +} + +void copyEngine::newActionInProgess(EngineActionInProgress action) +{ + if(action==Idle) + { + timerProgression.stop(); + timerActionDone.stop(); + } + else + { + timerProgression.start(); + timerActionDone.start(); + } +} + +//dialog message +/// \note Can be call without queue because all call will be serialized +void copyEngine::fileAlreadyExistsSlot(QFileInfo source,QFileInfo destination,bool isSame,TransferThread * thread) +{ + emit collision(); +} + +/// \note Can be call without queue because all call will be serialized +void copyEngine::errorOnFileSlot(QFileInfo fileInfo,QString errorString,TransferThread * thread) +{ + emit error(); +} + +/// \note Can be call without queue because all call will be serialized +void copyEngine::folderAlreadyExistsSlot(QFileInfo source,QFileInfo destination,bool isSame,scanFileOrFolder * thread) +{ + emit collision(); +} + +/// \note Can be call without queue because all call will be serialized +void copyEngine::errorOnFolderSlot(QFileInfo fileInfo,QString errorString,scanFileOrFolder * thread) +{ + emit error(); +} + +//mkpath event +void copyEngine::mkPathErrorOnFolderSlot(QFileInfo folder,QString error) +{ + emit error(); +} + +//rmpath event +void copyEngine::rmPathErrorOnFolderSlot(QFileInfo folder,QString error) +{ + emit error(); +} + + +/// \note Can be call without queue because all call will be serialized +void copyEngine::fileAlreadyExists(QFileInfo source,QFileInfo destination,bool isSame,TransferThread * thread,bool isCalledByShowOneNewDialog) +{ + if(stopIt) + return; + if(thread==NULL) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to locate the thread"); + return; + } + //load the action + if(isSame) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"file is same: "+source.absoluteFilePath()); + tempFileExistsAction=alwaysDoThisActionForFileExists; + if(tempFileExistsAction==FileExists_Overwrite || tempFileExistsAction==FileExists_OverwriteIfNewer || tempFileExistsAction==FileExists_OverwriteIfNotSameModificationDate) + tempFileExistsAction=FileExists_NotSet; + switch(tempFileExistsAction) + { + case FileExists_Skip: + case FileExists_Rename: + thread->setFileExistsAction(tempFileExistsAction); + break; + default: + if(dialogIsOpen) + { + alreadyExistsQueueItem newItem; + newItem.source=source; + newItem.destination=destination; + newItem.isSame=isSame; + newItem.transfer=thread; + newItem.scan=NULL; + alreadyExistsQueue << newItem; + return; + } + dialogIsOpen=true; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"show dialog"); + fileIsSameDialog dialog(interface,source,firstRenamingRule,otherRenamingRule); + emit isInPause(true); + dialog.exec();/// \bug crash when external close + FileExistsAction newAction=dialog.getAction(); + emit isInPause(false); + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"close dialog: "+QString::number(newAction)); + if(newAction==FileExists_Cancel) + { + emit cancelAll(); + return; + } + if(dialog.getAlways() && newAction!=alwaysDoThisActionForFileExists) + { + alwaysDoThisActionForFileExists=newAction; + listThread->setAlwaysFileExistsAction(alwaysDoThisActionForFileExists); + switch(newAction) + { + default: + case FileExists_Skip: + emit newCollisionAction("skip"); + break; + case FileExists_Rename: + emit newCollisionAction("rename"); + break; + } + } + if(dialog.getAlways() || newAction!=FileExists_Rename) + thread->setFileExistsAction(newAction); + else + thread->setFileRename(dialog.getNewName()); + dialogIsOpen=false; + if(!isCalledByShowOneNewDialog) + emit queryOneNewDialog(); + return; + break; + } + } + else + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"file already exists: "+source.absoluteFilePath()+", destination: "+destination.absoluteFilePath()); + tempFileExistsAction=alwaysDoThisActionForFileExists; + switch(tempFileExistsAction) + { + case FileExists_Skip: + case FileExists_Rename: + case FileExists_Overwrite: + case FileExists_OverwriteIfNewer: + case FileExists_OverwriteIfNotSameModificationDate: + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"always do this action: "+QString::number(tempFileExistsAction)); + thread->setFileExistsAction(tempFileExistsAction); + break; + default: + if(dialogIsOpen) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,QString("dialog open, put in queue: %1 %2") + .arg(source.absoluteFilePath()) + .arg(destination.absoluteFilePath()) + ); + alreadyExistsQueueItem newItem; + newItem.source=source; + newItem.destination=destination; + newItem.isSame=isSame; + newItem.transfer=thread; + newItem.scan=NULL; + alreadyExistsQueue << newItem; + return; + } + dialogIsOpen=true; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"show dialog"); + fileExistsDialog dialog(interface,source,destination,firstRenamingRule,otherRenamingRule); + emit isInPause(true); + dialog.exec();/// \bug crash when external close + FileExistsAction newAction=dialog.getAction(); + emit isInPause(false); + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"close dialog: "+QString::number(newAction)); + if(newAction==FileExists_Cancel) + { + emit cancelAll(); + return; + } + if(dialog.getAlways() && newAction!=alwaysDoThisActionForFileExists) + { + alwaysDoThisActionForFileExists=newAction; + listThread->setAlwaysFileExistsAction(alwaysDoThisActionForFileExists); + switch(newAction) + { + default: + case FileExists_Skip: + emit newCollisionAction("skip"); + break; + case FileExists_Rename: + emit newCollisionAction("rename"); + break; + case FileExists_Overwrite: + emit newCollisionAction("overwrite"); + break; + case FileExists_OverwriteIfNewer: + emit newCollisionAction("overwriteIfNewer"); + break; + case FileExists_OverwriteIfNotSameModificationDate: + emit newCollisionAction("overwriteIfNotSameModificationDate"); + break; + } + } + if(dialog.getAlways() || newAction!=FileExists_Rename) + thread->setFileExistsAction(newAction); + else + thread->setFileRename(dialog.getNewName()); + dialogIsOpen=false; + if(!isCalledByShowOneNewDialog) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"emit queryOneNewDialog()"); + emit queryOneNewDialog(); + } + return; + break; + } + } + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"stop"); +} + +/// \note Can be call without queue because all call will be serialized +void copyEngine::errorOnFile(QFileInfo fileInfo,QString errorString,TransferThread * thread,bool isCalledByShowOneNewDialog) +{ + if(stopIt) + return; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"file have error: "+fileInfo.absoluteFilePath()+", error: "+errorString); + if(thread==NULL) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to locate the thread"); + return; + } + //load the action + tempFileErrorAction=alwaysDoThisActionForFileError; + switch(tempFileErrorAction) + { + case FileError_Skip: + thread->skip(); + return; + case FileError_Retry: + thread->retryAfterError(); + return; + case FileError_PutToEndOfTheList: + /// \todo do the read transfer locator and put at the end + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"todo list item not found"); + return; + default: + if(dialogIsOpen) + { + errorQueueItem newItem; + newItem.errorString=errorString; + newItem.inode=fileInfo; + newItem.mkPath=false; + newItem.rmPath=false; + newItem.scan=NULL; + newItem.transfer=thread; + errorQueue << newItem; + return; + } + dialogIsOpen=true; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"show dialog"); + emit error(fileInfo.absoluteFilePath(),fileInfo.size(),fileInfo.lastModified(),errorString); + fileErrorDialog dialog(interface,fileInfo,errorString); + emit isInPause(true); + dialog.exec();/// \bug crash when external close + FileErrorAction newAction=dialog.getAction(); + emit isInPause(false); + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"close dialog: "+QString::number(newAction)); + if(newAction==FileError_Cancel) + { + emit cancelAll(); + return; + } + if(dialog.getAlways() && newAction!=alwaysDoThisActionForFileError) + { + alwaysDoThisActionForFileError=newAction; + switch(newAction) + { + default: + case FileError_Skip: + emit newErrorAction("skip"); + break; + case FileError_PutToEndOfTheList: + emit newErrorAction("putToEndOfTheList"); + break; + } + } + switch(newAction) + { + case FileError_Skip: + thread->skip(); + break; + case FileError_Retry: + thread->retryAfterError(); + break; + case FileError_PutToEndOfTheList: + thread->putAtBottom(); + /// \todo do the read transfer locator and put at the end + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,"todo"); + break; + default: + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,"file error action wrong"); + break; + } + dialogIsOpen=false; + if(!isCalledByShowOneNewDialog) + emit queryOneNewDialog(); + else + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"isCalledByShowOneNewDialog==true then not show other dial"); + return; + break; + } + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"stop"); +} + +/// \note Can be call without queue because all call will be serialized +void copyEngine::folderAlreadyExists(QFileInfo source,QFileInfo destination,bool isSame,scanFileOrFolder * thread,bool isCalledByShowOneNewDialog) +{ + if(stopIt) + return; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"folder already exists: "+source.absoluteFilePath()+", destination: "+destination.absoluteFilePath()); + if(thread==NULL) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to locate the thread"); + return; + } + //load the always action + tempFolderExistsAction=alwaysDoThisActionForFolderExists; + switch(tempFolderExistsAction) + { + case FolderExists_Skip: + case FolderExists_Rename: + case FolderExists_Merge: + thread->setFolderExistsAction(tempFolderExistsAction); + break; + default: + if(dialogIsOpen) + { + alreadyExistsQueueItem newItem; + newItem.source=source; + newItem.destination=destination; + newItem.isSame=isSame; + newItem.transfer=NULL; + newItem.scan=thread; + alreadyExistsQueue << newItem; + return; + } + dialogIsOpen=true; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"show dialog"); + folderExistsDialog dialog(interface,source,isSame,destination,firstRenamingRule,otherRenamingRule); + dialog.exec();/// \bug crash when external close + FolderExistsAction newAction=dialog.getAction(); + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"close dialog: "+QString::number(newAction)); + if(newAction==FolderExists_Cancel) + { + emit cancelAll(); + return; + } + if(dialog.getAlways() && newAction!=alwaysDoThisActionForFolderExists) + setComboBoxFolderColision(newAction); + if(!dialog.getAlways() && newAction==FolderExists_Rename) + thread->setFolderExistsAction(newAction,dialog.getNewName()); + else + thread->setFolderExistsAction(newAction); + dialogIsOpen=false; + if(!isCalledByShowOneNewDialog) + emit queryOneNewDialog(); + return; + break; + } +} + +/// \note Can be call without queue because all call will be serialized +/// \todo all this part +void copyEngine::errorOnFolder(QFileInfo fileInfo,QString errorString,scanFileOrFolder * thread,bool isCalledByShowOneNewDialog) +{ + if(stopIt) + return; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"file have error: "+fileInfo.absoluteFilePath()+", error: "+errorString); + if(thread==NULL) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"unable to locate the thread"); + return; + } + //load the always action + tempFileErrorAction=alwaysDoThisActionForFolderError; + switch(tempFileErrorAction) + { + case FileError_Skip: + case FileError_Retry: + case FileError_PutToEndOfTheList: + thread->setFolderErrorAction(tempFileErrorAction); + break; + default: + if(dialogIsOpen) + { + errorQueueItem newItem; + newItem.errorString=errorString; + newItem.inode=fileInfo; + newItem.mkPath=false; + newItem.rmPath=false; + newItem.scan=thread; + newItem.transfer=NULL; + errorQueue << newItem; + return; + } + dialogIsOpen=true; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"show dialog"); + emit error(fileInfo.absoluteFilePath(),fileInfo.size(),fileInfo.lastModified(),errorString); + fileErrorDialog dialog(interface,fileInfo,errorString); + dialog.exec();/// \bug crash when external close + FileErrorAction newAction=dialog.getAction(); + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"close dialog: "+QString::number(newAction)); + if(newAction==FileError_Cancel) + { + emit cancelAll(); + return; + } + if(dialog.getAlways() && newAction!=alwaysDoThisActionForFileError) + setComboBoxFolderError(newAction); + dialogIsOpen=false; + thread->setFolderErrorAction(newAction); + if(!isCalledByShowOneNewDialog) + emit queryOneNewDialog(); + return; + break; + } + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"stop"); +} + +// ----------------------------------------------------- + +//mkpath event +void copyEngine::mkPathErrorOnFolder(QFileInfo folder,QString errorString,bool isCalledByShowOneNewDialog) +{ + if(stopIt) + return; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"file have error: "+folder.absoluteFilePath()+", error: "+errorString); + //load the always action + tempFileErrorAction=alwaysDoThisActionForFolderError; + error_index=0; + switch(tempFileErrorAction) + { + case FileError_Skip: + listThread->mkPathQueue.skip(); + return; + case FileError_Retry: + listThread->mkPathQueue.retry(); + return; + default: + if(dialogIsOpen) + { + errorQueueItem newItem; + newItem.errorString=errorString; + newItem.inode=folder; + newItem.mkPath=true; + newItem.rmPath=false; + newItem.scan=NULL; + newItem.transfer=NULL; + errorQueue << newItem; + return; + } + dialogIsOpen=true; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"show dialog"); + emit error(folder.absoluteFilePath(),folder.size(),folder.lastModified(),errorString); + fileErrorDialog dialog(interface,folder,errorString,false); + dialog.exec();/// \bug crash when external close + FileErrorAction newAction=dialog.getAction(); + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"close dialog: "+QString::number(newAction)); + if(newAction==FileError_Cancel) + { + emit cancelAll(); + return; + } + if(dialog.getAlways() && newAction!=alwaysDoThisActionForFileError) + { + setComboBoxFolderError(newAction); + alwaysDoThisActionForFolderError=newAction; + } + dialogIsOpen=false; + switch(newAction) + { + case FileError_Skip: + listThread->mkPathQueue.skip(); + break; + case FileError_Retry: + listThread->mkPathQueue.retry(); + break; + default: + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,"Unknow switch case: "+QString::number(newAction)); + break; + } + if(!isCalledByShowOneNewDialog) + emit queryOneNewDialog(); + return; + break; + } + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"stop"); +} + +//rmpath event +void copyEngine::rmPathErrorOnFolder(QFileInfo folder,QString errorString,bool isCalledByShowOneNewDialog) +{ + if(stopIt) + return; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"file have error: "+folder.absoluteFilePath()+", error: "+errorString); + //load the always action + tempFileErrorAction=alwaysDoThisActionForFolderError; + error_index=0; + switch(tempFileErrorAction) + { + case FileError_Skip: + listThread->rmPathQueue.skip(); + return; + case FileError_Retry: + listThread->rmPathQueue.retry(); + return; + default: + if(dialogIsOpen) + { + errorQueueItem newItem; + newItem.errorString=errorString; + newItem.inode=folder; + newItem.mkPath=false; + newItem.rmPath=true; + newItem.scan=NULL; + newItem.transfer=NULL; + errorQueue << newItem; + return; + } + dialogIsOpen=true; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"show dialog"); + emit error(folder.absoluteFilePath(),folder.size(),folder.lastModified(),errorString); + fileErrorDialog dialog(interface,folder,errorString,false); + dialog.exec();/// \bug crash when external close + FileErrorAction newAction=dialog.getAction(); + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"close dialog: "+QString::number(newAction)); + if(newAction==FileError_Cancel) + { + emit cancelAll(); + return; + } + if(dialog.getAlways() && newAction!=alwaysDoThisActionForFileError) + { + setComboBoxFolderError(newAction); + alwaysDoThisActionForFolderError=newAction; + } + dialogIsOpen=false; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"do the action"); + switch(newAction) + { + case FileError_Skip: + listThread->rmPathQueue.skip(); + break; + case FileError_Retry: + listThread->rmPathQueue.retry(); + break; + default: + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,"Unknow switch case: "+QString::number(newAction)); + break; + } + if(!isCalledByShowOneNewDialog) + emit queryOneNewDialog(); + return; + break; + } + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"stop"); +} + +//show one new dialog if needed +void copyEngine::showOneNewDialog() +{ + if(stopIt) + return; + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"alreadyExistsQueue.size(): "+QString::number(alreadyExistsQueue.size())); + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Notice,"errorQueue.size(): "+QString::number(errorQueue.size())); + loop_size=alreadyExistsQueue.size(); + while(loop_size>0) + { + if(alreadyExistsQueue.first().transfer!=NULL) + { + fileAlreadyExists(alreadyExistsQueue.first().source, + alreadyExistsQueue.first().destination, + alreadyExistsQueue.first().isSame, + alreadyExistsQueue.first().transfer, + true); + } + else if(alreadyExistsQueue.first().scan!=NULL) + folderAlreadyExists(alreadyExistsQueue.first().source, + alreadyExistsQueue.first().destination, + alreadyExistsQueue.first().isSame, + alreadyExistsQueue.first().scan, + true); + else + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"bug, no thread actived"); + alreadyExistsQueue.removeFirst(); + loop_size--; + } + loop_size=errorQueue.size(); + while(errorQueue.size()>0) + { + if(errorQueue.first().transfer!=NULL) + errorOnFile(errorQueue.first().inode,errorQueue.first().errorString,errorQueue.first().transfer,true); + else if(errorQueue.first().scan!=NULL) + errorOnFolder(errorQueue.first().inode,errorQueue.first().errorString,errorQueue.first().scan,true); + else if(errorQueue.first().mkPath) + mkPathErrorOnFolder(errorQueue.first().inode,errorQueue.first().errorString,true); + else if(errorQueue.first().rmPath) + rmPathErrorOnFolder(errorQueue.first().inode,errorQueue.first().errorString,true); + else + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Critical,"bug, no thread actived"); + errorQueue.removeFirst(); + loop_size--; + } +} diff --git a/tools/unit-tester/copyEngine.h b/tools/unit-tester/copyEngine.h new file mode 100644 index 0000000..7d81724 --- /dev/null +++ b/tools/unit-tester/copyEngine.h @@ -0,0 +1,263 @@ +/** \file copyEngine.h +\brief Define the copy engine +\author alpha_one_x86 +\licence GPL3, see the file COPYING */ + +#include <QObject> +#include <QList> +#include <QStringList> +#include <QFileInfo> +#include <QFile> +#include <QFileDialog> +#include <QMessageBox> + +#include "../../../interface/PluginInterface_CopyEngine.h" +#include "fileErrorDialog.h" +#include "fileExistsDialog.h" +#include "folderExistsDialog.h" +#include "fileIsSameDialog.h" +#include "ui_options.h" +#include "Environment.h" +#include "ListThread.h" +#include "Filters.h" +#include "RenamingRules.h" + +#ifndef COPY_ENGINE_H +#define COPY_ENGINE_H + +namespace Ui { + class options; +} + +/// \brief the implementation of copy engine plugin, manage directly few stuff, else pass to ListThread class. +class copyEngine : public PluginInterface_CopyEngine +{ + Q_OBJECT +public: + enum SupportedTest{Test_Copy}; + + copyEngine(const QString &path,const QList<SupportedTest> &tests); + ~copyEngine(); +private: + ListThread *listThread; + bool dialogIsOpen; + QList<SupportedTest> tests; +private slots: + void fileAlreadyExistsSlot(QFileInfo source,QFileInfo destination,bool isSame,TransferThread * thread); + void errorOnFileSlot(QFileInfo fileInfo,QString errorString,TransferThread * thread); + void folderAlreadyExistsSlot(QFileInfo source,QFileInfo destination,bool isSame,scanFileOrFolder * thread); + void errorOnFolderSlot(QFileInfo fileInfo,QString errorString,scanFileOrFolder * thread); + void mkPathErrorOnFolderSlot(QFileInfo,QString); + void rmPathErrorOnFolderSlot(QFileInfo,QString); + + //dialog message + /// \note Can be call without queue because all call will be serialized + void fileAlreadyExists(QFileInfo source,QFileInfo destination,bool isSame,TransferThread * thread,bool isCalledByShowOneNewDialog=false); + /// \note Can be call without queue because all call will be serialized + void errorOnFile(QFileInfo fileInfo,QString errorString,TransferThread * thread,bool isCalledByShowOneNewDialog=false); + /// \note Can be call without queue because all call will be serialized + void folderAlreadyExists(QFileInfo source,QFileInfo destination,bool isSame,scanFileOrFolder * thread,bool isCalledByShowOneNewDialog=false); + /// \note Can be call without queue because all call will be serialized + void errorOnFolder(QFileInfo fileInfo,QString errorString,scanFileOrFolder * thread,bool isCalledByShowOneNewDialog=false); + //mkpath event + void mkPathErrorOnFolder(QFileInfo,QString,bool isCalledByShowOneNewDialog=false); + //rmpath event + void rmPathErrorOnFolder(QFileInfo,QString,bool isCalledByShowOneNewDialog=false); + + //show one new dialog if needed + void showOneNewDialog(); + void sendNewFilters(); + + void doChecksum_toggled(bool); + void checksumOnlyOnError_toggled(bool); + void checksumIgnoreIfImpossible_toggled(bool); + void osBuffer_toggled(bool); + void osBufferLimited_toggled(bool); + void osBufferLimit_editingFinished(); + void showFilterDialog(); + void sendNewRenamingRules(QString firstRenamingRule,QString otherRenamingRule); + void showRenamingRules(); + void get_realBytesTransfered(quint64 realBytesTransfered); + void newActionInProgess(EngineActionInProgress); + void updateBufferCheckbox(); +public: + /** \brief to send the options panel + * \return return false if have not the options + * \param tempWidget the widget to generate on it the options */ + bool getOptionsEngine(QWidget * tempWidget); + /** \brief to have interface widget to do modal dialog + * \param interface to have the widget of the interface, useful for modal dialog */ + void setInterfacePointer(QWidget * interface); + //return empty if multiple + /** \brief compare the current sources of the copy, with the passed arguments + * \param sources the sources list to compares with the current sources list + * \return true if have same sources, else false (or empty) */ + bool haveSameSource(const QStringList &sources); + /** \brief compare the current destination of the copy, with the passed arguments + * \param destination the destination to compares with the current destination + * \return true if have same destination, else false (or empty) */ + bool haveSameDestination(const QString &destination); + //external soft like file browser have send copy/move list to do + /** \brief send copy without destination, ask the destination + * \param sources the sources list to copy + * \return true if the copy have been accepted */ + bool newCopy(const QStringList &sources); + /** \brief send copy with destination + * \param sources the sources list to copy + * \param destination the destination to copy + * \return true if the copy have been accepted */ + bool newCopy(const QStringList &sources,const QString &destination); + /** \brief send move without destination, ask the destination + * \param sources the sources list to move + * \return true if the move have been accepted */ + bool newMove(const QStringList &sources); + /** \brief send move without destination, ask the destination + * \param sources the sources list to move + * \param destination the destination to move + * \return true if the move have been accepted */ + bool newMove(const QStringList &sources,const QString &destination); + /** \brief send the new transfer list + * \param file the transfer list */ + void newTransferList(const QString &file); + + /** \brief to get byte read, use by Ultracopier for the speed calculation + * real size transfered to right speed calculation */ + quint64 realByteTransfered(); + //speed limitation + /** \brief get the speed limitation + * < -1 if not able, 0 if disabled */ + qint64 getSpeedLimitation(); + //get collision action + /** \brief get the collision action list */ + QList<QPair<QString,QString> > getCollisionAction(); + /** \brief get the collision error list */ + QList<QPair<QString,QString> > getErrorAction(); + + /** \brief to set drives detected + * specific to this copy engine */ + void setDrive(const QStringList &drives); + + /** \brief to sync the transfer list + * Used when the interface is changed, useful to minimize the memory size */ + void syncTransferList(); + + void set_doChecksum(bool doChecksum); + void set_checksumIgnoreIfImpossible(bool checksumIgnoreIfImpossible); + void set_checksumOnlyOnError(bool checksumOnlyOnError); + void set_osBuffer(bool osBuffer); + void set_osBufferLimited(bool osBufferLimited); + void set_osBufferLimit(unsigned int osBufferLimit); + void set_setFilters(QStringList includeStrings,QStringList includeOptions,QStringList excludeStrings,QStringList excludeOptions); + void setRenamingRules(QString firstRenamingRule,QString otherRenamingRule); +public slots: + //user ask ask to add folder (add it with interface ask source/destination) + /** \brief add folder called on the interface + * Used by manual adding */ + bool userAddFolder(const CopyMode &mode); + /** \brief add file called on the interface + * Used by manual adding */ + bool userAddFile(const CopyMode &mode); + //action on the copy + /// \brief put the transfer in pause + void pause(); + /// \brief resume the transfer + void resume(); + /** \brief skip one transfer entry + * \param id id of the file to remove */ + void skip(const quint64 &id); + /// \brief cancel all the transfer + void cancel(); + //edit the transfer list + /** \brief remove the selected item + * \param ids ids is the id list of the selected items */ + void removeItems(const QList<int> &ids); + /** \brief move on top of the list the selected item + * \param ids ids is the id list of the selected items */ + void moveItemsOnTop(const QList<int> &ids); + /** \brief move up the list the selected item + * \param ids ids is the id list of the selected items */ + void moveItemsUp(const QList<int> &ids); + /** \brief move down the list the selected item + * \param ids ids is the id list of the selected items */ + void moveItemsDown(const QList<int> &ids); + /** \brief move on bottom of the list the selected item + * \param ids ids is the id list of the selected items */ + void moveItemsOnBottom(const QList<int> &ids); + + /** \brief give the forced mode, to export/import transfer list */ + void forceMode(const CopyMode &mode); + /// \brief export the transfer list into a file + void exportTransferList(); + /// \brief import the transfer list into a file + void importTransferList(); + + /** \brief to set the speed limitation + * -1 if not able, 0 if disabled */ + bool setSpeedLimitation(const qint64 &speedLimitation); + //action + /// \brief to set the collision action + void setCollisionAction(const QString &action); + /// \brief to set the error action + void setErrorAction(const QString &action); + + // specific to this copy engine + + /// \brief set if the rights shoul be keep + void setRightTransfer(const bool doRightTransfer); + /// \brief set keep date + void setKeepDate(const bool keepDate); + /// \brief set block size in KB + void setBlockSize(const int blockSize); + /// \brief set auto start + void setAutoStart(const bool autoStart); + /// \brief set if need check if the destination folder exists + void setCheckDestinationFolderExists(const bool checkDestinationFolderExists); + /// \brief reset widget + void resetTempWidget(); + //autoconnect + void on_comboBoxFolderColision_currentIndexChanged(int index); + void on_comboBoxFolderError_currentIndexChanged(int index); + /// \brief need retranslate the insterface + void newLanguageLoaded(); +private slots: + void setComboBoxFolderColision(FolderExistsAction action,bool changeComboBox=true); + void setComboBoxFolderError(FileErrorAction action,bool changeComboBox=true); + void warningTransferList(const QString &warning); + void errorTransferList(const QString &error); +signals: + void error(); + void collision(); + + //action on the copy + void signal_pause(); + void signal_resume(); + void signal_skip(const quint64 &id); + + //edit the transfer list + void signal_removeItems(const QList<int> &ids); + void signal_moveItemsOnTop(const QList<int> &ids); + void signal_moveItemsUp(const QList<int> &ids); + void signal_moveItemsDown(const QList<int> &ids); + void signal_moveItemsOnBottom(const QList<int> &ids); + + void signal_forceMode(const CopyMode &mode); + void signal_exportTransferList(const QString &fileName); + void signal_importTransferList(const QString &fileName); + + //action + void signal_setCollisionAction(FileExistsAction alwaysDoThisActionForFileExists); + void signal_setComboBoxFolderColision(FolderExistsAction action); + void signal_setFolderColision(FolderExistsAction action); + + //when the cancel is clicked on copy engine dialog + void cancelAll(); + + //other signals + void queryOneNewDialog(); + + void send_osBufferLimit(const unsigned int &osBufferLimit); + void send_setFilters(const QList<Filters_rules> &include,const QList<Filters_rules> &exclude); + void send_sendNewRenamingRules(QString firstRenamingRule,QString otherRenamingRule); +}; + +#endif // COPY_ENGINE_H diff --git a/tools/unit-tester/copyEngineUnitTester.cpp b/tools/unit-tester/copyEngineUnitTester.cpp new file mode 100644 index 0000000..5632576 --- /dev/null +++ b/tools/unit-tester/copyEngineUnitTester.cpp @@ -0,0 +1,104 @@ +/** \file copyEngine.cpp +\brief Define the copy engine + */ + +#include "copyEngineUnitTester.h" + +#include <stdio.h> +#include <stdlib.h> +#include <time.h> + +copyEngineUnitTester::copyEngineUnitTester(const QString &path,const QList<SupportedTest> &tests) +{ + this->path=path; + connect(&timer,&QTimer::timeout,this,©EngineUnitTester::initialize,Qt::QueuedConnection); + srand ( time(NULL) ); +} + +copyEngineUnitTester::~copyEngineUnitTester() +{ + rmpath(path); +} + +void copyEngineUnitTester::errorSlot() +{ +} + +void copyEngineUnitTester::collisionSlot() +{ +} + +void copyEngineUnitTester::initialize() +{ + initializeSource(); +} + +void copyEngineUnitTester::initializeSource() +{ + QDir dir(path); + dir.mkpath(path); + dir.mkpath(path+"/source/"); + dir.mkpath(path+"/destination/"); +} + +bool copyEngineUnitTester::mkFile(const QString &dir,const quint16 &minSize,const quint16 &maxSize) +{ + QString name; + int index=0; + while(index<(16/4)) + { + name+=QString::number(rand()%10000); + index++; + } + QFile file(dir+"/"+name); + if(file.open(QIODevice::WriteOnly)) + { + int size=minSize+(rand()%(maxSize-minSize)); + int index=0; + QByteArray byte; + while(index<size) + { + byte[0]=rand()%256; + file.write(byte); + index++; + } + file.close(); + return true; + } + else + { + qDebug() << file.errorString(); + return false; + } +} + +/** remplace QDir::rmpath() because it return false if the folder not exists + and seam bug with parent folder */ +bool copyEngineUnitTester::rmpath(const QDir &dir) +{ + if(!dir.exists()) + return true; + bool allHaveWork=true; + QFileInfoList list = dir.entryInfoList(QDir::AllEntries|QDir::NoDotAndDotDot|QDir::Hidden|QDir::System,QDir::DirsFirst); + for (int i = 0; i < list.size(); ++i) + { + QFileInfo fileInfo(list.at(i)); + if(!fileInfo.isDir()) + { + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,"found a file: "+fileInfo.fileName()); + allHaveWork=false; + } + else + { + //return the fonction for scan the new folder + if(!rmpath(dir.absolutePath()+'/'+fileInfo.fileName()+'/')) + allHaveWork=false; + } + } + if(!allHaveWork) + return allHaveWork; + allHaveWork=dir.rmdir(dir.absolutePath()); + if(!allHaveWork) + ULTRACOPIER_DEBUGCONSOLE(Ultracopier::DebugLevel_Warning,"unable to remove the folder: "+dir.absolutePath()); + return allHaveWork; +} diff --git a/tools/unit-tester/copyEngineUnitTester.h b/tools/unit-tester/copyEngineUnitTester.h new file mode 100644 index 0000000..c64804c --- /dev/null +++ b/tools/unit-tester/copyEngineUnitTester.h @@ -0,0 +1,46 @@ +/** \file copyEngine.h +\brief Define the copy engine +\author alpha_one_x86 +\licence GPL3, see the file COPYING */ + +#include <QObject> +#include <QList> +#include <QStringList> +#include <QFileInfo> +#include <QFile> +#include <QTimer> + +#include "copyEngine.h" + +#ifndef COPY_ENGINE_UNIT_TESTER_H +#define COPY_ENGINE_UNIT_TESTER_H + +namespace Ui { + class options; +} + +/// \brief the implementation of copy engine plugin, manage directly few stuff, else pass to ListThread class. +class copyEngineUnitTester : public copyEngine +{ + Q_OBJECT +public: + enum SupportedTest{Test_Copy}; + + copyEngineUnitTester(const QString &path,const QList<SupportedTest> &tests); + ~copyEngineUnitTester(); +private: + ListThread *listThread; + bool dialogIsOpen; + QList<SupportedTest> tests; + QTimer timer; + QString path; + void initializeSource(); + bool rmpath(const QDir &dir); + bool mkFile(const QString &dir,const quint16 &minSize=0,const quint16 &maxSize=65535); +private slots: + void errorSlot(); + void collisionSlot(); + void initialize(); +}; + +#endif // COPY_ENGINE_UNIT_TESTER_H diff --git a/tools/unit-tester/main.cpp b/tools/unit-tester/main.cpp new file mode 100644 index 0000000..3731aeb --- /dev/null +++ b/tools/unit-tester/main.cpp @@ -0,0 +1,8 @@ +#include <QCoreApplication> + +int main(int argc, char *argv[]) +{ + QCoreApplication a(argc, argv); + + return a.exec(); +} diff --git a/tools/unit-tester/unit-tester.pro b/tools/unit-tester/unit-tester.pro new file mode 100644 index 0000000..65dc00b --- /dev/null +++ b/tools/unit-tester/unit-tester.pro @@ -0,0 +1,42 @@ +#------------------------------------------------- +# +# Project created by QtCreator 2012-10-19T22:52:40 +# +#------------------------------------------------- + +QT += core + +QT -= gui + +TARGET = unit-tester +CONFIG += console +CONFIG -= app_bundle + +TEMPLATE = app + + +SOURCES += main.cpp \ + ../../plugins/CopyEngine/Ultracopier/ReadThread.cpp \ + ../../plugins/CopyEngine/Ultracopier/AvancedQFile.cpp \ + ../../plugins/CopyEngine/Ultracopier/WriteThread.cpp \ + ../../plugins/CopyEngine/Ultracopier/TransferThread.cpp \ + ../../plugins/CopyEngine/Ultracopier/ListThread_InodeAction.cpp \ + ../../plugins/CopyEngine/Ultracopier/ListThread.cpp \ + ../../plugins/CopyEngine/Ultracopier/MkPath.cpp \ + ../../plugins/CopyEngine/Ultracopier/scanFileOrFolder.cpp \ + ../../plugins/CopyEngine/Ultracopier/RmPath.cpp \ + copyEngineUnitTester.cpp \ + copyEngine.cpp + +HEADERS += \ + ../../plugins/CopyEngine/Ultracopier/ReadThread.h \ + ../../plugins/CopyEngine/Ultracopier/AvancedQFile.h \ + ../../plugins/CopyEngine/Ultracopier/Variable.h \ + ../../plugins/CopyEngine/Ultracopier/WriteThread.h \ + ../../plugins/CopyEngine/Ultracopier/TransferThread.h \ + ../../plugins/CopyEngine/Ultracopier/ListThread.h \ + ../../plugins/CopyEngine/Ultracopier/MkPath.h \ + ../../plugins/CopyEngine/Ultracopier/scanFileOrFolder.h \ + ../../plugins/CopyEngine/Ultracopier/RmPath.h \ + copyEngineUnitTester.h \ + copyEngine.h |