Removed tests/xsthammer

This test is now available as 'vloghammer' in a seperate repository:
https://github.com/cliffordwolf/VlogHammer

1 files changed, 0 insertions, 160 deletions

diff --git a/tests/xsthammer/report.sh b/tests/xsthammer/report.sh
deleted file mode 100644
index d6ddd862..00000000
--- a/tests/xsthammer/report.sh
+++ /dev/null
@@ -1,160 +0,0 @@
-#!/bin/bash
-
-if [ $# -eq 0 ]; then
-	echo "Usage: $0 <job_id>" >&2
-	exit 1
-fi
-
-job="$1"
-set --
-
-set -ex
-rm -rf report_temp/$job
-mkdir -p report report_temp/$job
-cd report_temp/$job
-
-cp ../../vivado/$job.v syn_vivado.v
-cp ../../quartus/$job.v syn_quartus.v
-cp ../../xst/$job.v syn_xst.v
-cp ../../rtl/$job.v rtl.v
-
-yosys -p 'hierarchy; proc; opt; techmap; abc; opt' -b 'verilog -noattr' -o syn_yosys.v ../../rtl/$job.v
-cat ../../xl_cells.v ../../cy_cells.v > cells.v
-
-{
-	echo "module ${job}_test(a, b, y1, y2);"
-	sed -r '/^(input|output) / !d; /output/ { s/ y;/ y1;/; p; }; s/ y1;/ y2;/;' rtl.v
-	echo "${job}_1 uut1 (.a(a), .b(b), .y(y1));"
-	echo "${job}_2 uut2 (.a(a), .b(b), .y(y2));"
-	echo "endmodule"
-} > test.v
-
-echo -n > fail_patterns.txt
-for p in syn_vivado syn_quartus syn_xst syn_yosys rtl; do
-for q in syn_vivado syn_quartus syn_xst syn_yosys rtl; do
-	if test -f result.${q}.${p}.txt; then
-		cp result.${q}.${p}.txt result.${p}.${q}.txt
-		continue
-	fi
-
-	{
-		echo "read_verilog -DGLBL $p.v"
-		echo "rename $job ${job}_1"
-
-		echo "read_verilog -DGLBL $q.v"
-		echo "rename $job ${job}_2"
-
-		echo "read_verilog cells.v test.v"
-		echo "hierarchy -top ${job}_test"
-		echo "proc; opt; flatten ${job}_test"
-		echo "hierarchy -check -top ${job}_test"
-
-		echo "! touch test.$p.$q.input_ok"
-		echo "sat -timeout 10 -verify-no-timeout -show a,b,y1,y2 -prove y1 y2 ${job}_test"
-	} > test.$p.$q.ys
-
-	if yosys -l test.$p.$q.log test.$p.$q.ys; then
-		if grep TIMEOUT test.$p.$q.log; then
-			echo TIMEOUT > result.${p}.${q}.txt
-		else
-			echo PASS > result.${p}.${q}.txt
-		fi
-	else
-		echo $( grep '^ *\\[ab] ' test.$p.$q.log | gawk '{ print $4; }' | tr -d '\n' ) >> fail_patterns.txt
-		echo FAIL > result.${p}.${q}.txt
-	fi
-
-	# this fails if an error was encountered before the 'sat' command
-	rm test.$p.$q.input_ok
-done; done
-
-{
-	echo "module testbench;"
-
-	sed -r '/^input / !d; s/^input/reg/;' rtl.v
-	for p in syn_vivado syn_quartus syn_xst syn_yosys rtl; do
-		sed -r "/^output / !d; s/^output/wire/; s/ y;/ ${p}_y;/;" rtl.v
-		echo "${job}_${p} uut_${p} (.a(a), .b(b), .y(${p}_y));"
-	done
-
-	echo "initial begin"
-	extra_patterns=""
-	bits=$( echo $( grep '^input' rtl.v | cut -f2 -d'[' | cut -f1 -d: | tr '\n' '+' )2 | bc; )
-	for x in 1 2 3 4 5 6 7 8 9 0; do
-		extra_patterns="$extra_patterns $( echo $job$x | sha1sum | gawk "{ print \"160'h\" \$1; }" )"
-	done
-	for pattern in $bits\'b0 ~$bits\'b0 $( sed "s/^/$bits'b/;" < fail_patterns.txt ) $extra_patterns; do
-		echo "  { a, b } <= $pattern; #1;"
-		for p in syn_vivado syn_quartus syn_xst syn_yosys rtl; do
-			echo "  \$display(\"++RPT++ %b $p\", ${p}_y);"
-		done
-		echo "  \$display(\"++RPT++ ----\");"
-	done
-	echo "end"
-
-	echo "endmodule"
-
-	for p in syn_vivado syn_quartus syn_xst syn_yosys rtl; do
-		sed "s/^module ${job}/module ${job}_${p}/; /^\`timescale/ d;" < $p.v
-	done
-
-	cat cells.v
-} > testbench.v
-
-/opt/altera/13.0/modelsim_ase/bin/vlib work
-/opt/altera/13.0/modelsim_ase/bin/vlog testbench.v
-/opt/altera/13.0/modelsim_ase/bin/vsim -c -do "run; exit" work.testbench | tee sim_modelsim.log
-
-. /opt/Xilinx/14.5/ISE_DS/settings64.sh
-vlogcomp testbench.v
-fuse -o testbench testbench
-{ echo "run all"; echo "exit"; } > run-all.tcl
-./testbench -tclbatch run-all.tcl | tee sim_isim.log
-
-for p in syn_vivado syn_quartus syn_xst syn_yosys rtl; do
-for q in isim modelsim; do
-	echo $( grep '++RPT++' sim_$q.log | sed 's,.*++RPT++ ,,' | grep " $p\$" | gawk '{ print $1; }' | md5sum | gawk '{ print $1; }' ) > result.${p}.${q}.txt
-done; done
-
-echo "#00ff00" > color_PASS.txt
-echo "#ff0000" > color_FAIL.txt
-
-if cmp result.rtl.isim.txt result.rtl.modelsim.txt; then
-	echo "#00ff00" > color_$( cat result.rtl.isim.txt ).txt
-else
-	echo "#00ff00" > color_NO_SIM_COMMON.txt
-fi
-
-{
-	echo "<h3>Hammer Report: $job</h3>"
-	echo "<table border>"
-	echo "<tr><th width=\"100\"></th>"
-	for q in syn_vivado syn_quartus syn_xst syn_yosys rtl isim modelsim; do
-		echo "<th width=\"100\">$q</th>"
-	done
-	echo "</tr>"
-	for p in syn_vivado syn_quartus syn_xst syn_yosys rtl; do
-		echo "<tr><th>$p</th>"
-		for q in syn_vivado syn_quartus syn_xst syn_yosys rtl isim modelsim; do
-			read result < result.${p}.${q}.txt
-			if ! test -f color_$result.txt; then
-				case $( ls color_*.txt | wc -l ) in
-					3) echo "#ffff00" > color_$result.txt ;;
-					4) echo "#ff00ff" > color_$result.txt ;;
-					5) echo "#00ffff" > color_$result.txt ;;
-					*) echo "#888888" > color_$result.txt ;;
-				esac
-			fi
-			echo "<td align=\"center\" bgcolor=\"$( cat color_$result.txt )\">$( echo $result | cut -c1-8 )</td>"
-		done
-		echo "</tr>"
-	done
-	echo "<tr><td colspan=\"8\"><pre>$( perl -pe 's/([<>&])/"&#".ord($1).";"/eg;' rtl.v |
-		perl -pe 's!([^\w#]|^)(\w+)\b!$x = $1; $y = $2; sprintf("%s<span style=\"color: %s;\">%s</span>", $x, $y =~ /module|input|wire|output|assign|signed|endmodule/ ? "#008800;" : "#000088;", $y)!eg' )</pre></td></tr>"
-	#perl -pe 's,\b(module|input|wire|output|assign|signed|endmodule)\b,<span style="color: #008800;">$1</span>,g' )</pre></td></tr>"
-	echo "</table>"
-} > ../../report/$job.html
-
-sync
-echo READY.
-