diff options
Diffstat (limited to 'techlibs/intel/cyclonev')
| -rw-r--r-- | techlibs/intel/cyclonev/cells_map.v | 4 | ||||
| -rw-r--r-- | techlibs/intel/cyclonev/cells_sim.v | 14 |
2 files changed, 12 insertions, 6 deletions
diff --git a/techlibs/intel/cyclonev/cells_map.v b/techlibs/intel/cyclonev/cells_map.v index bd60d4e1..f8d142bc 100644 --- a/techlibs/intel/cyclonev/cells_map.v +++ b/techlibs/intel/cyclonev/cells_map.v @@ -76,7 +76,7 @@ module \$lut (A, Y); wire VCC; wire GND; assign {VCC,GND} = {1'b1,1'b0}; - + generate if (WIDTH == 1) begin assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function @@ -151,7 +151,7 @@ module \$lut (A, Y); TODO: There's not a just 7-input function on Cyclone V, see the following note: **Extended LUT Mode** Use extended LUT mode to implement a specific set of 7-input functions. The set must - be a 2-to-1 multiplexer fed by two arbitrary 5-input functions sharing four inputs. + be a 2-to-1 multiplexer fed by two arbitrary 5-input functions sharing four inputs. [source](Device Interfaces and Integration Basics for Cyclone V Devices). end*/ else diff --git a/techlibs/intel/cyclonev/cells_sim.v b/techlibs/intel/cyclonev/cells_sim.v index 5ecdabcf..9b2a10e7 100644 --- a/techlibs/intel/cyclonev/cells_sim.v +++ b/techlibs/intel/cyclonev/cells_sim.v @@ -54,7 +54,7 @@ module cyclonev_lcell_comb // Internal variables // Sub mask for fragmented LUTs wire [15:0] mask_a, mask_b, mask_c, mask_d; - // Independant output for fragmented LUTs + // Independent output for fragmented LUTs wire output_0, output_1, output_2, output_3; // Extended mode uses mux to define the output wire mux_0, mux_1; @@ -85,7 +85,7 @@ module cyclonev_lcell_comb begin upper_lut_value = lut4(mask[31:16], dataa, datab, datac, datad); lower_lut_value = lut4(mask[15:0], dataa, datab, datac, datad); - lut5 = (datae) ? upper_mask_value : lower_mask_value; + lut5 = (datae) ? upper_lut_value : lower_lut_value; end endfunction // lut5 @@ -95,15 +95,16 @@ module cyclonev_lcell_comb input dataa, datab, datac, datad, datae, dataf; reg upper_lut_value; reg lower_lut_value; + reg out_0, out_1, out_2, out_3; begin upper_lut_value = lut5(mask[63:32], dataa, datab, datac, datad, datae); lower_lut_value = lut5(mask[31:0], dataa, datab, datac, datad, datae); - lut6 = (dataf) ? upper_mask_value : lower_mask_value; + lut6 = (dataf) ? upper_lut_value : lower_lut_value; end endfunction // lut6 assign {mask_a, mask_b, mask_c, mask_d} = {lut_mask[15:0], lut_mask[31:16], lut_mask[47:32], lut_mask[63:48]}; - +`ifdef ADVANCED_ALM always @(*) begin if(extended_lut == "on") shared_lut_alm = datag; @@ -115,6 +116,11 @@ module cyclonev_lcell_comb out_2 = lut4(mask_c, dataa, datab, datac, datad); out_3 = lut4(mask_d, dataa, datab, shared_lut_alm, datad); end +`else + `ifdef DEBUG + initial $display("Advanced ALM lut combine is not implemented yet"); + `endif +`endif endmodule // cyclonev_lcell_comb |