diff options
Diffstat (limited to 'techlibs/xilinx/cells_map.v')
| -rw-r--r-- | techlibs/xilinx/cells_map.v | 208 |
1 files changed, 139 insertions, 69 deletions
diff --git a/techlibs/xilinx/cells_map.v b/techlibs/xilinx/cells_map.v index 0771be0b..40789ddb 100644 --- a/techlibs/xilinx/cells_map.v +++ b/techlibs/xilinx/cells_map.v @@ -1,86 +1,156 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ -module \$_DFF_N_ (input D, C, output Q); FDRE #(.INIT(|0), .IS_C_INVERTED(|1), .IS_D_INVERTED(|0), .IS_R_INVERTED(|0)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .R(1'b0)); endmodule -module \$_DFF_P_ (input D, C, output Q); FDRE #(.INIT(|0), .IS_C_INVERTED(|0), .IS_D_INVERTED(|0), .IS_R_INVERTED(|0)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .R(1'b0)); endmodule +// Convert negative-polarity reset to positive-polarity +(* techmap_celltype = "$_DFF_NN0_" *) +module _90_dff_nn0_to_np0 (input D, C, R, output Q); \$_DFF_NP0_ _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .R(~R)); endmodule +(* techmap_celltype = "$_DFF_PN0_" *) +module _90_dff_pn0_to_pp0 (input D, C, R, output Q); \$_DFF_PP0_ _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .R(~R)); endmodule +(* techmap_celltype = "$_DFF_NN1_" *) +module _90_dff_nn1_to_np1 (input D, C, R, output Q); \$_DFF_NP1 _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .R(~R)); endmodule +(* techmap_celltype = "$_DFF_PN1_" *) +module _90_dff_pn1_to_pp1 (input D, C, R, output Q); \$_DFF_PP1 _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .R(~R)); endmodule -module \$_DFFE_NP_ (input D, C, E, output Q); FDRE #(.INIT(|0), .IS_C_INVERTED(|1), .IS_D_INVERTED(|0), .IS_R_INVERTED(|0)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .R(1'b0)); endmodule -module \$_DFFE_PP_ (input D, C, E, output Q); FDRE #(.INIT(|0), .IS_C_INVERTED(|0), .IS_D_INVERTED(|0), .IS_R_INVERTED(|0)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .R(1'b0)); endmodule +module \$__SHREG_ (input C, input D, input E, output Q); + parameter DEPTH = 0; + parameter [DEPTH-1:0] INIT = 0; + parameter CLKPOL = 1; + parameter ENPOL = 2; -module \$_DFF_NN0_ (input D, C, R, output Q); FDCE #(.INIT(|0), .IS_C_INVERTED(|1), .IS_D_INVERTED(|0), .IS_CLR_INVERTED(|1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR(R)); endmodule -module \$_DFF_NP0_ (input D, C, R, output Q); FDCE #(.INIT(|0), .IS_C_INVERTED(|1), .IS_D_INVERTED(|0), .IS_CLR_INVERTED(|0)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR(R)); endmodule -module \$_DFF_PN0_ (input D, C, R, output Q); FDCE #(.INIT(|0), .IS_C_INVERTED(|0), .IS_D_INVERTED(|0), .IS_CLR_INVERTED(|1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR(R)); endmodule -module \$_DFF_PP0_ (input D, C, R, output Q); FDCE #(.INIT(|0), .IS_C_INVERTED(|0), .IS_D_INVERTED(|0), .IS_CLR_INVERTED(|0)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR(R)); endmodule + \$__XILINX_SHREG_ #(.DEPTH(DEPTH), .INIT(INIT), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) _TECHMAP_REPLACE_ (.C(C), .D(D), .L(DEPTH-1), .E(E), .Q(Q)); +endmodule -module \$_DFF_NN1_ (input D, C, R, output Q); FDPE #(.INIT(|0), .IS_C_INVERTED(|1), .IS_D_INVERTED(|0), .IS_PRE_INVERTED(|1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE(R)); endmodule -module \$_DFF_NP1_ (input D, C, R, output Q); FDPE #(.INIT(|0), .IS_C_INVERTED(|1), .IS_D_INVERTED(|0), .IS_PRE_INVERTED(|0)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE(R)); endmodule -module \$_DFF_PN1_ (input D, C, R, output Q); FDPE #(.INIT(|0), .IS_C_INVERTED(|0), .IS_D_INVERTED(|0), .IS_PRE_INVERTED(|1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE(R)); endmodule -module \$_DFF_PP1_ (input D, C, R, output Q); FDPE #(.INIT(|0), .IS_C_INVERTED(|0), .IS_D_INVERTED(|0), .IS_PRE_INVERTED(|0)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE(R)); endmodule +module \$__XILINX_SHREG_ (input C, input D, input [31:0] L, input E, output Q, output SO); + parameter DEPTH = 0; + parameter [DEPTH-1:0] INIT = 0; + parameter CLKPOL = 1; + parameter ENPOL = 2; -`ifndef NO_LUT -module \$lut (A, Y); - parameter WIDTH = 0; - parameter LUT = 0; + // shregmap's INIT parameter shifts out LSB first; + // however Xilinx expects MSB first + function [DEPTH-1:0] brev; + input [DEPTH-1:0] din; + integer i; + begin + for (i = 0; i < DEPTH; i=i+1) + brev[i] = din[DEPTH-1-i]; + end + endfunction + localparam [DEPTH-1:0] INIT_R = brev(INIT); - input [WIDTH-1:0] A; - output Y; + parameter _TECHMAP_CONSTMSK_L_ = 0; + parameter _TECHMAP_CONSTVAL_L_ = 0; + wire CE; generate - if (WIDTH == 1) begin - LUT1 #(.INIT(LUT)) _TECHMAP_REPLACE_ (.O(Y), - .I0(A[0])); - end else - if (WIDTH == 2) begin - LUT2 #(.INIT(LUT)) _TECHMAP_REPLACE_ (.O(Y), - .I0(A[0]), .I1(A[1])); - end else - if (WIDTH == 3) begin - LUT3 #(.INIT(LUT)) _TECHMAP_REPLACE_ (.O(Y), - .I0(A[0]), .I1(A[1]), .I2(A[2])); + if (ENPOL == 0) + assign CE = ~E; + else if (ENPOL == 1) + assign CE = E; + else + assign CE = 1'b1; + if (DEPTH == 1) begin + if (CLKPOL) + FDRE #(.INIT(INIT_R)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(CE), .R(1'b0)); + else + FDRE_1 #(.INIT(INIT_R)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(CE), .R(1'b0)); end else - if (WIDTH == 4) begin - LUT4 #(.INIT(LUT)) _TECHMAP_REPLACE_ (.O(Y), - .I0(A[0]), .I1(A[1]), .I2(A[2]), - .I3(A[3])); + if (DEPTH <= 16) begin + SRL16E #(.INIT(INIT_R), .IS_CLK_INVERTED(~CLKPOL[0])) _TECHMAP_REPLACE_ (.A0(L[0]), .A1(L[1]), .A2(L[2]), .A3(L[3]), .CE(CE), .CLK(C), .D(D), .Q(Q)); end else - if (WIDTH == 5) begin - LUT5 #(.INIT(LUT)) _TECHMAP_REPLACE_ (.O(Y), - .I0(A[0]), .I1(A[1]), .I2(A[2]), - .I3(A[3]), .I4(A[4])); + if (DEPTH > 17 && DEPTH <= 32) begin + SRLC32E #(.INIT(INIT_R), .IS_CLK_INVERTED(~CLKPOL[0])) _TECHMAP_REPLACE_ (.A(L[4:0]), .CE(CE), .CLK(C), .D(D), .Q(Q)); end else - if (WIDTH == 6) begin - LUT6 #(.INIT(LUT)) _TECHMAP_REPLACE_ (.O(Y), - .I0(A[0]), .I1(A[1]), .I2(A[2]), - .I3(A[3]), .I4(A[4]), .I5(A[5])); + if (DEPTH > 33 && DEPTH <= 64) begin + wire T0, T1, T2; + SRLC32E #(.INIT(INIT_R[32-1:0]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_0 (.A(L[4:0]), .CE(CE), .CLK(C), .D(D), .Q(T0), .Q31(T1)); + \$__XILINX_SHREG_ #(.DEPTH(DEPTH-32), .INIT(INIT[DEPTH-32-1:0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_1 (.C(C), .D(T1), .L(L), .E(E), .Q(T2)); + if (&_TECHMAP_CONSTMSK_L_) + assign Q = T2; + else + MUXF7 fpga_mux_0 (.O(Q), .I0(T0), .I1(T2), .S(L[5])); end else - if (WIDTH == 7) begin - wire T0, T1; - LUT6 #(.INIT(LUT[63:0])) fpga_lut_0 (.O(T0), - .I0(A[0]), .I1(A[1]), .I2(A[2]), - .I3(A[3]), .I4(A[4]), .I5(A[5])); - LUT6 #(.INIT(LUT[127:64])) fpga_lut_1 (.O(T1), - .I0(A[0]), .I1(A[1]), .I2(A[2]), - .I3(A[3]), .I4(A[4]), .I5(A[5])); - MUXF7 fpga_mux_0 (.O(Y), .I0(T0), .I1(T1), .S(A[6])); + if (DEPTH > 65 && DEPTH <= 96) begin + wire T0, T1, T2, T3, T4, T5, T6; + SRLC32E #(.INIT(INIT_R[32-1:0]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_0 (.A(L[4:0]), .CE(CE), .CLK(C), .D(D), .Q(T0), .Q31(T1)); + SRLC32E #(.INIT(INIT_R[64-1:32]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_1 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T1), .Q(T2), .Q31(T3)); + \$__XILINX_SHREG_ #(.DEPTH(DEPTH-64), .INIT(INIT[DEPTH-64-1:0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_2 (.C(C), .D(T3), .L(L[4:0]), .E(E), .Q(T4)); + if (&_TECHMAP_CONSTMSK_L_) + assign Q = T4; + else begin + MUXF7 fpga_mux_0 (.O(T5), .I0(T0), .I1(T2), .S(L[5])); + MUXF7 fpga_mux_1 (.O(T6), .I0(T4), .I1(1'b0 /* unused */), .S(L[5])); + MUXF8 fpga_mux_2 (.O(Q), .I0(T5), .I1(T6), .S(L[6])); + end end else - if (WIDTH == 8) begin - wire T0, T1, T2, T3, T4, T5; - LUT6 #(.INIT(LUT[63:0])) fpga_lut_0 (.O(T0), - .I0(A[0]), .I1(A[1]), .I2(A[2]), - .I3(A[3]), .I4(A[4]), .I5(A[5])); - LUT6 #(.INIT(LUT[127:64])) fpga_lut_1 (.O(T1), - .I0(A[0]), .I1(A[1]), .I2(A[2]), - .I3(A[3]), .I4(A[4]), .I5(A[5])); - LUT6 #(.INIT(LUT[191:128])) fpga_lut_2 (.O(T2), - .I0(A[0]), .I1(A[1]), .I2(A[2]), - .I3(A[3]), .I4(A[4]), .I5(A[5])); - LUT6 #(.INIT(LUT[255:192])) fpga_lut_3 (.O(T3), - .I0(A[0]), .I1(A[1]), .I2(A[2]), - .I3(A[3]), .I4(A[4]), .I5(A[5])); - MUXF7 fpga_mux_0 (.O(T4), .I0(T0), .I1(T1), .S(A[6])); - MUXF7 fpga_mux_1 (.O(T5), .I0(T2), .I1(T3), .S(A[6])); - MUXF8 fpga_mux_2 (.O(Y), .I0(T4), .I1(T5), .S(A[7])); - end else begin - wire _TECHMAP_FAIL_ = 1; + if (DEPTH > 97 && DEPTH < 128) begin + wire T0, T1, T2, T3, T4, T5, T6, T7, T8; + SRLC32E #(.INIT(INIT_R[32-1:0]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_0 (.A(L[4:0]), .CE(CE), .CLK(C), .D(D), .Q(T0), .Q31(T1)); + SRLC32E #(.INIT(INIT_R[64-1:32]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_1 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T1), .Q(T2), .Q31(T3)); + SRLC32E #(.INIT(INIT_R[96-1:64]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_2 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T3), .Q(T4), .Q31(T5)); + \$__XILINX_SHREG_ #(.DEPTH(DEPTH-96), .INIT(INIT[DEPTH-96-1:0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_3 (.C(C), .D(T5), .L(L[4:0]), .E(E), .Q(T6)); + if (&_TECHMAP_CONSTMSK_L_) + assign Q = T6; + else begin + MUXF7 fpga_mux_0 (.O(T7), .I0(T0), .I1(T2), .S(L[5])); + MUXF7 fpga_mux_1 (.O(T8), .I0(T4), .I1(T6), .S(L[5])); + MUXF8 fpga_mux_2 (.O(Q), .I0(T7), .I1(T8), .S(L[6])); + end + end + else if (DEPTH == 128) begin + wire T0, T1, T2, T3, T4, T5, T6; + SRLC32E #(.INIT(INIT_R[32-1:0]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_0 (.A(L[4:0]), .CE(CE), .CLK(C), .D(D), .Q(T0), .Q31(T1)); + SRLC32E #(.INIT(INIT_R[64-1:32]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_1 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T1), .Q(T2), .Q31(T3)); + SRLC32E #(.INIT(INIT_R[96-1:64]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_2 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T3), .Q(T4), .Q31(T5)); + SRLC32E #(.INIT(INIT_R[128-1:96]), .IS_CLK_INVERTED(~CLKPOL[0])) fpga_srl_3 (.A(L[4:0]), .CE(CE), .CLK(C), .D(T5), .Q(T6), .Q31(SO)); + if (&_TECHMAP_CONSTMSK_L_) + assign Q = T6; + else begin + wire T7, T8; + MUXF7 fpga_mux_0 (.O(T7), .I0(T0), .I1(T2), .S(L[5])); + MUXF7 fpga_mux_1 (.O(T8), .I0(T4), .I1(T6), .S(L[5])); + MUXF8 fpga_mux_2 (.O(Q), .I0(T7), .I1(T8), .S(L[6])); + end + end + else if (DEPTH <= 129 && ~&_TECHMAP_CONSTMSK_L_) begin + // Handle cases where fixed-length depth is + // just 1 over a convenient value + \$__XILINX_SHREG_ #(.DEPTH(DEPTH+1), .INIT({INIT,1'b0}), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) _TECHMAP_REPLACE_ (.C(C), .D(D), .L(L), .E(E), .Q(Q)); + end + else begin + localparam lower_clog2 = $clog2((DEPTH+1)/2); + localparam lower_depth = 2 ** lower_clog2; + wire T0, T1, T2, T3; + if (&_TECHMAP_CONSTMSK_L_) begin + \$__XILINX_SHREG_ #(.DEPTH(lower_depth), .INIT(INIT[DEPTH-1:DEPTH-lower_depth]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_0 (.C(C), .D(D), .L(lower_depth-1), .E(E), .Q(T0)); + \$__XILINX_SHREG_ #(.DEPTH(DEPTH-lower_depth), .INIT(INIT[DEPTH-lower_depth-1:0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_1 (.C(C), .D(T0), .L(DEPTH-lower_depth-1), .E(E), .Q(Q), .SO(T3)); + end + else begin + \$__XILINX_SHREG_ #(.DEPTH(lower_depth), .INIT(INIT[DEPTH-1:DEPTH-lower_depth]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_0 (.C(C), .D(D), .L(L[lower_clog2-1:0]), .E(E), .Q(T0), .SO(T1)); + \$__XILINX_SHREG_ #(.DEPTH(DEPTH-lower_depth), .INIT(INIT[DEPTH-lower_depth-1:0]), .CLKPOL(CLKPOL), .ENPOL(ENPOL)) fpga_srl_1 (.C(C), .D(T1), .L(L[lower_clog2-1:0]), .E(E), .Q(T2), .SO(T3)); + assign Q = L[lower_clog2] ? T2 : T0; + end + if (DEPTH == 2 * lower_depth) + assign SO = T3; end endgenerate endmodule + +`ifndef SRL_ONLY `endif |