diff options
Diffstat (limited to 'techlibs')
| -rw-r--r-- | techlibs/common/simlib.v | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/techlibs/common/simlib.v b/techlibs/common/simlib.v index 9c774dea..1b50959c 100644 --- a/techlibs/common/simlib.v +++ b/techlibs/common/simlib.v @@ -1315,26 +1315,26 @@ generate for (i = 0; i < RD_PORTS; i = i+1) begin:rd if (RD_CLK_ENABLE[i] == 0) begin:rd_noclk always @(RD_ADDR or update_async_rd) - RD_DATA[ i*WIDTH +: WIDTH ] <= data[ RD_ADDR[ i*ABITS +: ABITS ] - OFFSET ]; + RD_DATA[i*WIDTH +: WIDTH] <= data[RD_ADDR[i*ABITS +: ABITS] - OFFSET]; end else if (RD_TRANSPARENT[i] == 1) begin:rd_transparent reg [ABITS-1:0] addr_buf; if (RD_CLK_POLARITY[i] == 1) begin:rd_trans_posclk always @(posedge RD_CLK[i]) - addr_buf <= RD_ADDR[ i*ABITS +: ABITS ]; + addr_buf <= RD_ADDR[i*ABITS +: ABITS]; end else begin:rd_trans_negclk always @(negedge RD_CLK[i]) - addr_buf <= RD_ADDR[ i*ABITS +: ABITS ]; + addr_buf <= RD_ADDR[i*ABITS +: ABITS]; end always @(addr_buf or update_async_rd) - RD_DATA[ i*WIDTH +: WIDTH ] <= data[ addr_buf - OFFSET ]; + RD_DATA[i*WIDTH +: WIDTH] <= data[addr_buf - OFFSET]; end else begin:rd_notransparent if (RD_CLK_POLARITY[i] == 1) begin:rd_notrans_posclk always @(posedge RD_CLK[i]) - RD_DATA[ i*WIDTH +: WIDTH ] <= data[ RD_ADDR[ i*ABITS +: ABITS ] - OFFSET ]; + RD_DATA[i*WIDTH +: WIDTH] <= data[RD_ADDR[i*ABITS +: ABITS] - OFFSET]; end else begin:rd_notrans_negclk always @(negedge RD_CLK[i]) - RD_DATA[ i*WIDTH +: WIDTH ] <= data[ RD_ADDR[ i*ABITS +: ABITS ] - OFFSET ]; + RD_DATA[i*WIDTH +: WIDTH] <= data[RD_ADDR[i*ABITS +: ABITS] - OFFSET]; end end end @@ -1346,13 +1346,13 @@ generate always @(WR_ADDR or WR_DATA or WR_EN) begin run_update = 0; for (n = 0; n < WIDTH; n = n+1) begin - if (WR_EN[i][n]) begin + if (WR_EN[i*WIDTH + n]) begin found_collision = 0; for (k = i+1; k < WR_PORTS; k = k+1) - if (WR_EN[k][n] && WR_ADDR[ i*ABITS +: ABITS ] == WR_ADDR[ k*ABITS +: ABITS ]) + if (WR_EN[k*WIDTH + n] && WR_ADDR[i*ABITS +: ABITS] == WR_ADDR[k*ABITS +: ABITS]) found_collision = 1; if (!found_collision) begin - data[ WR_ADDR[ i*ABITS +: ABITS ] - OFFSET ][n] <= WR_DATA[ i*WIDTH +: WIDTH ][n]; + data[WR_ADDR[i*ABITS +: ABITS] - OFFSET][n] <= WR_DATA[i*WIDTH + n]; run_update = 1; end end @@ -1367,13 +1367,13 @@ generate always @(posedge WR_CLK[i]) begin run_update = 0; for (n = 0; n < WIDTH; n = n+1) begin - if (WR_EN[i][n]) begin + if (WR_EN[i*WIDTH + n]) begin found_collision = 0; for (k = i+1; k < WR_PORTS; k = k+1) - if (WR_EN[k][n] && WR_ADDR[ i*ABITS +: ABITS ] == WR_ADDR[ k*ABITS +: ABITS ]) + if (WR_EN[k*WIDTH + n] && WR_ADDR[i*ABITS +: ABITS] == WR_ADDR[k*ABITS +: ABITS]) found_collision = 1; if (!found_collision) begin - data[ WR_ADDR[ i*ABITS +: ABITS ] - OFFSET ][n] <= WR_DATA[ i*WIDTH +: WIDTH ][n]; + data[WR_ADDR[i*ABITS +: ABITS] - OFFSET][n] <= WR_DATA[i*WIDTH + n]; run_update = 1; end end @@ -1387,13 +1387,13 @@ generate always @(negedge WR_CLK[i]) begin run_update = 0; for (n = 0; n < WIDTH; n = n+1) begin - if (WR_EN[i][n]) begin + if (WR_EN[i*WIDTH + n]) begin found_collision = 0; for (k = i+1; k < WR_PORTS; k = k+1) - if (WR_EN[k][n] && WR_ADDR[ i*ABITS +: ABITS ] == WR_ADDR[ k*ABITS +: ABITS ]) + if (WR_EN[k*WIDTH + n] && WR_ADDR[i*ABITS +: ABITS] == WR_ADDR[k*ABITS +: ABITS]) found_collision = 1; if (!found_collision) begin - data[ WR_ADDR[ i*ABITS +: ABITS ] - OFFSET ][n] <= WR_DATA[ i*WIDTH +: WIDTH ][n]; + data[WR_ADDR[i*ABITS +: ABITS] - OFFSET][n] <= WR_DATA[i*WIDTH + n]; run_update = 1; end end |