/* * yosys -- Yosys Open SYnthesis Suite * * Copyright (C) 2012 Clifford Wolf * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ module VCC (output V); assign V = 1'b1; endmodule // VCC module GND (output G); assign G = 1'b0; endmodule // GND /* Altera Cyclone 10 LP devices Input Buffer Primitive */ module cyclone10lp_io_ibuf (output o, input i, input ibar); assign ibar = ibar; assign o = i; endmodule // cyclone10lp_io_ibuf /* Altera Cyclone 10 LP devices Output Buffer Primitive */ module cyclone10lp_io_obuf (output o, input i, input oe); assign o = i; assign oe = oe; endmodule // cyclone10lp_io_obuf /* Altera Cyclone IV (E) 4-input non-fracturable LUT Primitive */ module cyclone10lp_lcell_comb (output combout, cout, input dataa, datab, datac, datad, cin); /* Internal parameters which define the behaviour of the LUT primitive. lut_mask define the lut function, can be expressed in 16-digit bin or hex. sum_lutc_input define the type of LUT (combinational | arithmetic). dont_touch for retiming || carry options. lpm_type for WYSIWYG */ parameter lut_mask = 16'hFFFF; parameter dont_touch = "off"; parameter lpm_type = "cyclone10lp_lcell_comb"; parameter sum_lutc_input = "datac"; reg [1:0] lut_type; reg cout_rt; reg combout_rt; wire dataa_w; wire datab_w; wire datac_w; wire datad_w; wire cin_w; assign dataa_w = dataa; assign datab_w = datab; assign datac_w = datac; assign datad_w = datad; function lut_data; input [15:0] mask; input dataa, datab, datac, datad; reg [7:0] s3; reg [3:0] s2; reg [1:0] s1; begin s3 = datad ? mask[15:8] : mask[7:0]; s2 = datac ? s3[7:4] : s3[3:0]; s1 = datab ? s2[3:2] : s2[1:0]; lut_data = dataa ? s1[1] : s1[0]; end endfunction initial begin if (sum_lutc_input == "datac") lut_type = 0; else if (sum_lutc_input == "cin") lut_type = 1; else begin $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input); $finish(); end end always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin if (lut_type == 0) begin // logic function combout_rt = lut_data(lut_mask, dataa_w, datab_w, datac_w, datad_w); end else if (lut_type == 1) begin // arithmetic function combout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, datad_w); end cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0); end assign combout = combout_rt & 1'b1; assign cout = cout_rt & 1'b1; endmodule // cyclone10lp_lcell_comb /* Altera D Flip-Flop Primitive */ module dffeas (output q, input d, clk, clrn, prn, ena, input asdata, aload, sclr, sload); // Timing simulation is not covered parameter power_up="dontcare"; parameter is_wysiwyg="false"; reg q_tmp; wire reset; reg [7:0] debug_net; assign reset = (prn && sclr && ~clrn && ena); assign q = q_tmp & 1'b1; always @(posedge clk, posedge aload) begin if(reset) q_tmp <= 0; else q_tmp <= d; end assign q = q_tmp; endmodule // dffeas