//---------------------------------------------------------------------------- // Copyright (C) 2009 , Olivier Girard // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // * Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // * Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // * Neither the name of the authors nor the names of its contributors // may be used to endorse or promote products derived from this software // without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, // OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF // THE POSSIBILITY OF SUCH DAMAGE // //---------------------------------------------------------------------------- // // *File Name: openMSP430_defines.v // // *Module Description: // openMSP430 Configuration file // // *Author(s): // - Olivier Girard, olgirard@gmail.com // //---------------------------------------------------------------------------- // $Rev: 151 $ // $LastChangedBy: olivier.girard $ // $LastChangedDate: 2012-07-23 00:24:11 +0200 (Mon, 23 Jul 2012) $ //---------------------------------------------------------------------------- //`define OMSP_NO_INCLUDE `ifdef OMSP_NO_INCLUDE `else `include "openMSP430_undefines.v" `endif //============================================================================ //============================================================================ // BASIC SYSTEM CONFIGURATION //============================================================================ //============================================================================ // // Note: the sum of program, data and peripheral memory spaces must not // exceed 64 kB // // Program Memory Size: // Uncomment the required memory size //------------------------------------------------------- //`define PMEM_SIZE_CUSTOM //`define PMEM_SIZE_59_KB //`define PMEM_SIZE_55_KB //`define PMEM_SIZE_54_KB //`define PMEM_SIZE_51_KB //`define PMEM_SIZE_48_KB //`define PMEM_SIZE_41_KB //`define PMEM_SIZE_32_KB //`define PMEM_SIZE_24_KB //`define PMEM_SIZE_16_KB //`define PMEM_SIZE_12_KB //`define PMEM_SIZE_8_KB //`define PMEM_SIZE_4_KB `define PMEM_SIZE_2_KB //`define PMEM_SIZE_1_KB // Data Memory Size: // Uncomment the required memory size //------------------------------------------------------- //`define DMEM_SIZE_CUSTOM //`define DMEM_SIZE_32_KB //`define DMEM_SIZE_24_KB //`define DMEM_SIZE_16_KB //`define DMEM_SIZE_10_KB //`define DMEM_SIZE_8_KB //`define DMEM_SIZE_5_KB //`define DMEM_SIZE_4_KB //`define DMEM_SIZE_2p5_KB //`define DMEM_SIZE_2_KB //`define DMEM_SIZE_1_KB //`define DMEM_SIZE_512_B //`define DMEM_SIZE_256_B `define DMEM_SIZE_128_B // Include/Exclude Hardware Multiplier `define MULTIPLIER // Include/Exclude Serial Debug interface `define DBG_EN //============================================================================ //============================================================================ // ADVANCED SYSTEM CONFIGURATION (FOR EXPERIENCED USERS) //============================================================================ //============================================================================ //------------------------------------------------------- // Custom user version number //------------------------------------------------------- // This 5 bit field can be freely used in order to allow // custom identification of the system through the debug // interface. // (see CPU_ID.USER_VERSION field in the documentation) //------------------------------------------------------- `define USER_VERSION 5'b00000 //------------------------------------------------------- // Include/Exclude Watchdog timer //------------------------------------------------------- // When excluded, the following functionality will be // lost: // - Watchog (both interval and watchdog modes) // - NMI interrupt edge selection // - Possibility to generate a software PUC reset //------------------------------------------------------- `define WATCHDOG ///------------------------------------------------------- // Include/Exclude Non-Maskable-Interrupt support //------------------------------------------------------- `define NMI //------------------------------------------------------- // Input synchronizers //------------------------------------------------------- // In some cases, the asynchronous input ports might // already be synchronized externally. // If an extensive CDC design review showed that this // is really the case, the individual synchronizers // can be disabled with the following defines. // // Notes: // - all three signals are all sampled in the MCLK domain // // - the dbg_en signal reset the debug interface // when 0. Therefore make sure it is glitch free. // //------------------------------------------------------- `define SYNC_NMI //`define SYNC_CPU_EN //`define SYNC_DBG_EN //------------------------------------------------------- // Peripheral Memory Space: //------------------------------------------------------- // The original MSP430 architecture map the peripherals // from 0x0000 to 0x01FF (i.e. 512B of the memory space). // The following defines allow you to expand this space // up to 32 kB (i.e. from 0x0000 to 0x7fff). // As a consequence, the data memory mapping will be // shifted up and a custom linker script will therefore // be required by the GCC compiler. //------------------------------------------------------- //`define PER_SIZE_CUSTOM //`define PER_SIZE_32_KB //`define PER_SIZE_16_KB //`define PER_SIZE_8_KB //`define PER_SIZE_4_KB //`define PER_SIZE_2_KB //`define PER_SIZE_1_KB `define PER_SIZE_512_B //------------------------------------------------------- // Defines the debugger CPU_CTL.RST_BRK_EN reset value // (CPU break on PUC reset) //------------------------------------------------------- // When defined, the CPU will automatically break after // a PUC occurrence by default. This is typically useful // when the program memory can only be initialized through // the serial debug interface. //------------------------------------------------------- `define DBG_RST_BRK_EN //============================================================================ //============================================================================ // EXPERT SYSTEM CONFIGURATION ( !!!! EXPERTS ONLY !!!! ) //============================================================================ //============================================================================ // // IMPORTANT NOTE: Please update following configuration options ONLY if // you have a good reason to do so... and if you know what // you are doing :-P // //============================================================================ //------------------------------------------------------- // Number of hardware breakpoint/watchpoint units // (each unit contains two hardware addresses available // for breakpoints or watchpoints): // - DBG_HWBRK_0 -> Include hardware breakpoints unit 0 // - DBG_HWBRK_1 -> Include hardware breakpoints unit 1 // - DBG_HWBRK_2 -> Include hardware breakpoints unit 2 // - DBG_HWBRK_3 -> Include hardware breakpoints unit 3 //------------------------------------------------------- // Please keep in mind that hardware breakpoints only // make sense whenever the program memory is not an SRAM // (i.e. Flash/OTP/ROM/...) or when you are interested // in data breakpoints. //------------------------------------------------------- //`define DBG_HWBRK_0 //`define DBG_HWBRK_1 //`define DBG_HWBRK_2 //`define DBG_HWBRK_3 //------------------------------------------------------- // Enable/Disable the hardware breakpoint RANGE mode //------------------------------------------------------- // When enabled this feature allows the hardware breakpoint // units to stop the cpu whenever an instruction or data // access lays within an address range. // Note that this feature is not supported by GDB. //------------------------------------------------------- //`define DBG_HWBRK_RANGE //------------------------------------------------------- // Custom Program/Data and Peripheral Memory Spaces //------------------------------------------------------- // The following values are valid only if the // corresponding *_SIZE_CUSTOM defines are uncommented: // // - *_SIZE : size of the section in bytes. // - *_AWIDTH : address port width, this value must allow // to address all WORDS of the section // (i.e. the *_SIZE divided by 2) //------------------------------------------------------- // Custom Program memory (enabled with PMEM_SIZE_CUSTOM) `define PMEM_CUSTOM_AWIDTH 10 `define PMEM_CUSTOM_SIZE 2028 // Custom Data memory (enabled with DMEM_SIZE_CUSTOM) `define DMEM_CUSTOM_AWIDTH 6 `define DMEM_CUSTOM_SIZE 128 // Custom Peripheral memory (enabled with PER_SIZE_CUSTOM) `define PER_CUSTOM_AWIDTH 8 `define PER_CUSTOM_SIZE 512 //------------------------------------------------------- // ASIC version //------------------------------------------------------- // When uncommented, this define will enable the // ASIC system configuration section (see below) and // will activate scan support for production test. // // WARNING: if you target an FPGA, leave this define // commented. //------------------------------------------------------- //`define ASIC //============================================================================ //============================================================================ // ASIC SYSTEM CONFIGURATION ( !!!! EXPERTS/PROFESSIONALS ONLY !!!! ) //============================================================================ //============================================================================ `ifdef ASIC //=============================================================== // FINE GRAINED CLOCK GATING //=============================================================== //------------------------------------------------------- // When uncommented, this define will enable the fine // grained clock gating of all registers in the core. //------------------------------------------------------- `define CLOCK_GATING //=============================================================== // LFXT CLOCK DOMAIN //=============================================================== //------------------------------------------------------- // When uncommented, this define will enable the lfxt_clk // clock domain. // When commented out, the whole chip is clocked with dco_clk. //------------------------------------------------------- `define LFXT_DOMAIN //=============================================================== // CLOCK MUXES //=============================================================== //------------------------------------------------------- // MCLK: Clock Mux //------------------------------------------------------- // When uncommented, this define will enable the // MCLK clock MUX allowing the selection between // DCO_CLK and LFXT_CLK with the BCSCTL2.SELMx register. // When commented, DCO_CLK is selected. //------------------------------------------------------- `define MCLK_MUX //------------------------------------------------------- // SMCLK: Clock Mux //------------------------------------------------------- // When uncommented, this define will enable the // SMCLK clock MUX allowing the selection between // DCO_CLK and LFXT_CLK with the BCSCTL2.SELS register. // When commented, DCO_CLK is selected. //------------------------------------------------------- `define SMCLK_MUX //------------------------------------------------------- // WATCHDOG: Clock Mux //------------------------------------------------------- // When uncommented, this define will enable the // Watchdog clock MUX allowing the selection between // ACLK and SMCLK with the WDTCTL.WDTSSEL register. // When commented out, ACLK is selected if the // WATCHDOG_NOMUX_ACLK define is uncommented, SMCLK is // selected otherwise. //------------------------------------------------------- `define WATCHDOG_MUX //`define WATCHDOG_NOMUX_ACLK //=============================================================== // CLOCK DIVIDERS //=============================================================== //------------------------------------------------------- // MCLK: Clock divider //------------------------------------------------------- // When uncommented, this define will enable the // MCLK clock divider (/1/2/4/8) //------------------------------------------------------- `define MCLK_DIVIDER //------------------------------------------------------- // SMCLK: Clock divider (/1/2/4/8) //------------------------------------------------------- // When uncommented, this define will enable the // SMCLK clock divider //------------------------------------------------------- `define SMCLK_DIVIDER //------------------------------------------------------- // ACLK: Clock divider (/1/2/4/8) //------------------------------------------------------- // When uncommented, this define will enable the // ACLK clock divider //------------------------------------------------------- `define ACLK_DIVIDER //=============================================================== // LOW POWER MODES //=============================================================== //------------------------------------------------------- // LOW POWER MODE: CPUOFF //------------------------------------------------------- // When uncommented, this define will include the // clock gate allowing to switch off MCLK in // all low power modes: LPM0, LPM1, LPM2, LPM3, LPM4 //------------------------------------------------------- `define CPUOFF_EN //------------------------------------------------------- // LOW POWER MODE: SCG0 //------------------------------------------------------- // When uncommented, this define will enable the // DCO_ENABLE/WKUP port control (always 1 when commented). // This allows to switch off the DCO oscillator in the // following low power modes: LPM1, LPM3, LPM4 //------------------------------------------------------- `define SCG0_EN //------------------------------------------------------- // LOW POWER MODE: SCG1 //------------------------------------------------------- // When uncommented, this define will include the // clock gate allowing to switch off SMCLK in // the following low power modes: LPM2, LPM3, LPM4 //------------------------------------------------------- `define SCG1_EN //------------------------------------------------------- // LOW POWER MODE: OSCOFF //------------------------------------------------------- // When uncommented, this define will include the // LFXT_CLK clock gate and enable the LFXT_ENABLE/WKUP // port control (always 1 when commented). // This allows to switch off the low frequency oscillator // in the following low power modes: LPM4 //------------------------------------------------------- `define OSCOFF_EN `endif //==========================================================================// //==========================================================================// //==========================================================================// //==========================================================================// //===== SYSTEM CONSTANTS --- !!!!!!!! DO NOT EDIT !!!!!!!! =====// //==========================================================================// //==========================================================================// //==========================================================================// //==========================================================================// // // PROGRAM, DATA & PERIPHERAL MEMORY CONFIGURATION //================================================== // Program Memory Size `ifdef PMEM_SIZE_59_KB `define PMEM_AWIDTH 15 `define PMEM_SIZE 60416 `endif `ifdef PMEM_SIZE_55_KB `define PMEM_AWIDTH 15 `define PMEM_SIZE 56320 `endif `ifdef PMEM_SIZE_54_KB `define PMEM_AWIDTH 15 `define PMEM_SIZE 55296 `endif `ifdef PMEM_SIZE_51_KB `define PMEM_AWIDTH 15 `define PMEM_SIZE 52224 `endif `ifdef PMEM_SIZE_48_KB `define PMEM_AWIDTH 15 `define PMEM_SIZE 49152 `endif `ifdef PMEM_SIZE_41_KB `define PMEM_AWIDTH 15 `define PMEM_SIZE 41984 `endif `ifdef PMEM_SIZE_32_KB `define PMEM_AWIDTH 14 `define PMEM_SIZE 32768 `endif `ifdef PMEM_SIZE_24_KB `define PMEM_AWIDTH 14 `define PMEM_SIZE 24576 `endif `ifdef PMEM_SIZE_16_KB `define PMEM_AWIDTH 13 `define PMEM_SIZE 16384 `endif `ifdef PMEM_SIZE_12_KB `define PMEM_AWIDTH 13 `define PMEM_SIZE 12288 `endif `ifdef PMEM_SIZE_8_KB `define PMEM_AWIDTH 12 `define PMEM_SIZE 8192 `endif `ifdef PMEM_SIZE_4_KB `define PMEM_AWIDTH 11 `define PMEM_SIZE 4096 `endif `ifdef PMEM_SIZE_2_KB `define PMEM_AWIDTH 10 `define PMEM_SIZE 2048 `endif `ifdef PMEM_SIZE_1_KB `define PMEM_AWIDTH 9 `define PMEM_SIZE 1024 `endif `ifdef PMEM_SIZE_CUSTOM `define PMEM_AWIDTH `PMEM_CUSTOM_AWIDTH `define PMEM_SIZE `PMEM_CUSTOM_SIZE `endif // Data Memory Size `ifdef DMEM_SIZE_32_KB `define DMEM_AWIDTH 14 `define DMEM_SIZE 32768 `endif `ifdef DMEM_SIZE_24_KB `define DMEM_AWIDTH 14 `define DMEM_SIZE 24576 `endif `ifdef DMEM_SIZE_16_KB `define DMEM_AWIDTH 13 `define DMEM_SIZE 16384 `endif `ifdef DMEM_SIZE_10_KB `define DMEM_AWIDTH 13 `define DMEM_SIZE 10240 `endif `ifdef DMEM_SIZE_8_KB `define DMEM_AWIDTH 12 `define DMEM_SIZE 8192 `endif `ifdef DMEM_SIZE_5_KB `define DMEM_AWIDTH 12 `define DMEM_SIZE 5120 `endif `ifdef DMEM_SIZE_4_KB `define DMEM_AWIDTH 11 `define DMEM_SIZE 4096 `endif `ifdef DMEM_SIZE_2p5_KB `define DMEM_AWIDTH 11 `define DMEM_SIZE 2560 `endif `ifdef DMEM_SIZE_2_KB `define DMEM_AWIDTH 10 `define DMEM_SIZE 2048 `endif `ifdef DMEM_SIZE_1_KB `define DMEM_AWIDTH 9 `define DMEM_SIZE 1024 `endif `ifdef DMEM_SIZE_512_B `define DMEM_AWIDTH 8 `define DMEM_SIZE 512 `endif `ifdef DMEM_SIZE_256_B `define DMEM_AWIDTH 7 `define DMEM_SIZE 256 `endif `ifdef DMEM_SIZE_128_B `define DMEM_AWIDTH 6 `define DMEM_SIZE 128 `endif `ifdef DMEM_SIZE_CUSTOM `define DMEM_AWIDTH `DMEM_CUSTOM_AWIDTH `define DMEM_SIZE `DMEM_CUSTOM_SIZE `endif // Peripheral Memory Size `ifdef PER_SIZE_32_KB `define PER_AWIDTH 14 `define PER_SIZE 32768 `endif `ifdef PER_SIZE_16_KB `define PER_AWIDTH 13 `define PER_SIZE 16384 `endif `ifdef PER_SIZE_8_KB `define PER_AWIDTH 12 `define PER_SIZE 8192 `endif `ifdef PER_SIZE_4_KB `define PER_AWIDTH 11 `define PER_SIZE 4096 `endif `ifdef PER_SIZE_2_KB `define PER_AWIDTH 10 `define PER_SIZE 2048 `endif `ifdef PER_SIZE_1_KB `define PER_AWIDTH 9 `define PER_SIZE 1024 `endif `ifdef PER_SIZE_512_B `define PER_AWIDTH 8 `define PER_SIZE 512 `endif `ifdef PER_SIZE_CUSTOM `define PER_AWIDTH `PER_CUSTOM_AWIDTH `define PER_SIZE `PER_CUSTOM_SIZE `endif // Data Memory Base Adresses `define DMEM_BASE `PER_SIZE // Program & Data Memory most significant address bit (for 16 bit words) `define PMEM_MSB `PMEM_AWIDTH-1 `define DMEM_MSB `DMEM_AWIDTH-1 `define PER_MSB `PER_AWIDTH-1 // // STATES, REGISTER FIELDS, ... //====================================== // Instructions type `define INST_SO 0 `define INST_JMP 1 `define INST_TO 2 // Single-operand arithmetic `define RRC 0 `define SWPB 1 `define RRA 2 `define SXT 3 `define PUSH 4 `define CALL 5 `define RETI 6 `define IRQ 7 // Conditional jump `define JNE 0 `define JEQ 1 `define JNC 2 `define JC 3 `define JN 4 `define JGE 5 `define JL 6 `define JMP 7 // Two-operand arithmetic `define MOV 0 `define ADD 1 `define ADDC 2 `define SUBC 3 `define SUB 4 `define CMP 5 `define DADD 6 `define BIT 7 `define BIC 8 `define BIS 9 `define XOR 10 `define AND 11 // Addressing modes `define DIR 0 `define IDX 1 `define INDIR 2 `define INDIR_I 3 `define SYMB 4 `define IMM 5 `define ABS 6 `define CONST 7 // Instruction state machine `define I_IRQ_FETCH 3'h0 `define I_IRQ_DONE 3'h1 `define I_DEC 3'h2 `define I_EXT1 3'h3 `define I_EXT2 3'h4 `define I_IDLE 3'h5 // Execution state machine // (swapped E_IRQ_0 and E_IRQ_2 values to suppress glitch generation warning from lint tool) `define E_IRQ_0 4'h2 `define E_IRQ_1 4'h1 `define E_IRQ_2 4'h0 `define E_IRQ_3 4'h3 `define E_IRQ_4 4'h4 `define E_SRC_AD 4'h5 `define E_SRC_RD 4'h6 `define E_SRC_WR 4'h7 `define E_DST_AD 4'h8 `define E_DST_RD 4'h9 `define E_DST_WR 4'hA `define E_EXEC 4'hB `define E_JUMP 4'hC `define E_IDLE 4'hD // ALU control signals `define ALU_SRC_INV 0 `define ALU_INC 1 `define ALU_INC_C 2 `define ALU_ADD 3 `define ALU_AND 4 `define ALU_OR 5 `define ALU_XOR 6 `define ALU_DADD 7 `define ALU_STAT_7 8 `define ALU_STAT_F 9 `define ALU_SHIFT 10 `define EXEC_NO_WR 11 // Debug interface `define DBG_UART_WR 18 `define DBG_UART_BW 17 `define DBG_UART_ADDR 16:11 // Debug interface CPU_CTL register `define HALT 0 `define RUN 1 `define ISTEP 2 `define SW_BRK_EN 3 `define FRZ_BRK_EN 4 `define RST_BRK_EN 5 `define CPU_RST 6 // Debug interface CPU_STAT register `define HALT_RUN 0 `define PUC_PND 1 `define SWBRK_PND 3 `define HWBRK0_PND 4 `define HWBRK1_PND 5 // Debug interface BRKx_CTL register `define BRK_MODE_RD 0 `define BRK_MODE_WR 1 `define BRK_MODE 1:0 `define BRK_EN 2 `define BRK_I_EN 3 `define BRK_RANGE 4 // Basic clock module: BCSCTL1 Control Register `define DIVAx 5:4 // Basic clock module: BCSCTL2 Control Register `define SELMx 7 `define DIVMx 5:4 `define SELS 3 `define DIVSx 2:1 // MCLK Clock gate `ifdef CPUOFF_EN `define MCLK_CGATE `else `ifdef MCLK_DIVIDER `define MCLK_CGATE `endif `endif // SMCLK Clock gate `ifdef SCG1_EN `define SMCLK_CGATE `else `ifdef SMCLK_DIVIDER `define SMCLK_CGATE `endif `endif // // DEBUG INTERFACE EXTRA CONFIGURATION //====================================== // Debug interface: CPU version `define CPU_VERSION 3'h2 // Debug interface: Software breakpoint opcode `define DBG_SWBRK_OP 16'h4343 // Debug UART interface auto data synchronization // If the following define is commented out, then // the DBG_UART_BAUD and DBG_DCO_FREQ need to be properly // defined. `define DBG_UART_AUTO_SYNC // Debug UART interface data rate // In order to properly setup the UART debug interface, you // need to specify the DCO_CLK frequency (DBG_DCO_FREQ) and // the chosen BAUD rate from the UART interface. // //`define DBG_UART_BAUD 9600 //`define DBG_UART_BAUD 19200 //`define DBG_UART_BAUD 38400 //`define DBG_UART_BAUD 57600 //`define DBG_UART_BAUD 115200 //`define DBG_UART_BAUD 230400 //`define DBG_UART_BAUD 460800 //`define DBG_UART_BAUD 576000 //`define DBG_UART_BAUD 921600 `define DBG_UART_BAUD 2000000 `define DBG_DCO_FREQ 20000000 `define DBG_UART_CNT ((`DBG_DCO_FREQ/`DBG_UART_BAUD)-1) // Debug interface selection // `define DBG_UART -> Enable UART (8N1) debug interface // `define DBG_JTAG -> DON'T UNCOMMENT, NOT SUPPORTED // `define DBG_UART //`define DBG_JTAG // Debug interface input synchronizer `define SYNC_DBG_UART_RXD // Enable/Disable the hardware breakpoint RANGE mode `ifdef DBG_HWBRK_RANGE `define HWBRK_RANGE 1'b1 `else `define HWBRK_RANGE 1'b0 `endif // Counter width for the debug interface UART `define DBG_UART_XFER_CNT_W 16 // Check configuration `ifdef DBG_EN `ifdef DBG_UART `ifdef DBG_JTAG CONFIGURATION ERROR: JTAG AND UART DEBUG INTERFACE ARE BOTH ENABLED `endif `else `ifdef DBG_JTAG CONFIGURATION ERROR: JTAG INTERFACE NOT SUPPORTED `else CONFIGURATION ERROR: JTAG OR UART DEBUG INTERFACE SHOULD BE ENABLED `endif `endif `endif // // MULTIPLIER CONFIGURATION //====================================== // If uncommented, the following define selects // the 16x16 multiplier (1 cycle) instead of the // default 16x8 multplier (2 cycles) //`define MPY_16x16 //====================================== // CONFIGURATION CHECKS //====================================== `ifdef LFXT_DOMAIN `else `ifdef MCLK_MUX CONFIGURATION ERROR: THE MCLK_MUX CAN ONLY BE ENABLED IF THE LFXT_DOMAIN IS ENABLED AS WELL `endif `ifdef SMCLK_MUX CONFIGURATION ERROR: THE SMCLK_MUX CAN ONLY BE ENABLED IF THE LFXT_DOMAIN IS ENABLED AS WELL `endif `ifdef WATCHDOG_MUX CONFIGURATION ERROR: THE WATCHDOG_MUX CAN ONLY BE ENABLED IF THE LFXT_DOMAIN IS ENABLED AS WELL `else `ifdef WATCHDOG_NOMUX_ACLK CONFIGURATION ERROR: THE WATCHDOG_NOMUX_ACLK CAN ONLY BE ENABLED IF THE LFXT_DOMAIN IS ENABLED AS WELL `endif `endif `ifdef OSCOFF_EN CONFIGURATION ERROR: THE OSCOFF LOW POWER MODE CAN ONLY BE ENABLED IF THE LFXT_DOMAIN IS ENABLED AS WELL `endif `endif