path: root/cupsfilters/ppdgenerator.c

/*
 *   PWG Raster/Apple Raster/PCLm/PDF/IPP legacy PPD generator
 *
 *   Copyright 2016-2019 by Till Kamppeter.
 *   Copyright 2017-2019 by Sahil Arora.
 *   Copyright 2018-2019 by Deepak Patankar.
 *
 *   The PPD generator is based on the PPD generator for the CUPS
 *   "lpadmin -m everywhere" functionality in the cups/ppd-cache.c
 *   file. The copyright of this file is:
 *
 *   Copyright 2010-2016 by Apple Inc.
 *
 *   These coded instructions, statements, and computer programs are the
 *   property of Apple Inc. and are protected by Federal copyright
 *   law.  Distribution and use rights are outlined in the file "COPYING"
 *   which should have been included with this file. 
 */

#include <config.h>
#include <limits.h>
#include <cups/cups.h>
#include <cups/dir.h>
#include <cupsfilters/ppdgenerator.h>
#if (CUPS_VERSION_MAJOR > 1) || (CUPS_VERSION_MINOR > 5)
#define HAVE_CUPS_1_6 1
#endif
#if (CUPS_VERSION_MAJOR > 1) || (CUPS_VERSION_MINOR > 6)
#define HAVE_CUPS_1_7 1
#endif

/*
 * Include necessary headers.
 */

#include <errno.h>
#include "driver.h"
#include <string.h>
#include <ctype.h>
#ifdef HAVE_CUPS_1_7
#include <cups/pwg.h>
#endif /* HAVE_CUPS_1_7 */

#ifdef HAVE_CUPS_1_6
/* The following code uses a lot of CUPS >= 1.6 specific stuff.
   It needed for create_local_queue() in cups-browsed
   to set up local queues for non-CUPS printer broadcasts
   that is disabled in create_local_queue() for older CUPS <= 1.5.4.
   Accordingly the following code is also disabled here for CUPS < 1.6. */

/*
 * The code below is borrowed from the CUPS 2.2.x upstream repository
 * (via patches attached to https://www.cups.org/str.php?L4258). This
 * allows for automatic PPD generation already with CUPS versions older
 * than CUPS 2.2.x. We have also an additional test and development
 * platform for this code. Taken from cups/ppd-cache.c,
 * cups/string-private.h, cups/string.c.
 * 
 * The advantage of PPD generation instead of working with System V
 * interface scripts is that the print dialogs of the clients do not
 * need to ask the printer for its options via IPP. So we have access
 * to the options with the current PPD-based dialogs and can even share
 * the automatically created print queue to other CUPS-based machines
 * without problems.
 */


cups_array_t *opt_strings_catalog = NULL;
char ppdgenerator_msg[1024];

typedef struct _pwg_finishings_s	/**** PWG finishings mapping data ****/
{
  ipp_finishings_t	value;		/* finishings value */
  int			num_options;	/* Number of options to apply */
  cups_option_t		*options;	/* Options to apply */
} _pwg_finishings_t;

#define _PWG_EQUIVALENT(x, y)	(abs((x)-(y)) < 2)

static void	pwg_ppdize_name(const char *ipp, char *name, size_t namesize);
static void	pwg_ppdize_resolution(ipp_attribute_t *attr, int element,
                                 int *xres, int *yres, char *name, size_t namesize);

/*
 * '_cupsSetError()' - Set the last PPD generator status-message.
 *
 * This function replaces the original _cupsSetError() of the private
 * API of the CUPS library. The #define and the renamed function prevent
 * from the linker using the original function of the CUPS library instead 
 * of this replacement function.
 */

#define _cupsSetError(x, y, z) _CFcupsSetError(x, y, z)

void
_CFcupsSetError(ipp_status_t status,	/* I - IPP status code
					   (for compatibility, ignored) */
		const char   *message,	/* I - status-message value */
		int          localize)	/* I - Localize the message?
					   (for compatibility, ignored) */
{
  (void)status;
  (void)localize;

  if (!message && errno)
    message  = strerror(errno);

  if (message)
    snprintf(ppdgenerator_msg, sizeof(ppdgenerator_msg), "%s", message);
}

int			/* O - 1 on match, 0 otherwise */
_cups_isalnum(int ch)			/* I - Character to test */
{
  return ((ch >= '0' && ch <= '9') ||
          (ch >= 'A' && ch <= 'Z') ||
          (ch >= 'a' && ch <= 'z'));
}

int			/* O - 1 on match, 0 otherwise */
_cups_isalpha(int ch)			/* I - Character to test */
{
  return ((ch >= 'A' && ch <= 'Z') ||
          (ch >= 'a' && ch <= 'z'));
}

int			/* O - 1 on match, 0 otherwise */
_cups_islower(int ch)			/* I - Character to test */
{
  return (ch >= 'a' && ch <= 'z');
}

int			/* O - 1 on match, 0 otherwise */
_cups_isspace(int ch)			/* I - Character to test */
{
  return (ch == ' ' || ch == '\f' || ch == '\n' || ch == '\r' || ch == '\t' ||
          ch == '\v');
}

int			/* O - 1 on match, 0 otherwise */
_cups_isupper(int ch)			/* I - Character to test */
{
  return (ch >= 'A' && ch <= 'Z');
}

int			/* O - Converted character */
_cups_tolower(int ch)			/* I - Character to convert */
{
  return (_cups_isupper(ch) ? ch - 'A' + 'a' : ch);
}

int			/* O - Converted character */
_cups_toupper(int ch)			/* I - Character to convert */
{
  return (_cups_islower(ch) ? ch - 'a' + 'A' : ch);
}

#ifndef HAVE_STRLCPY
/*
 * '_cups_strlcpy()' - Safely copy two strings.
 */

size_t					/* O - Length of string */
strlcpy(char       *dst,		/* O - Destination string */
	const char *src,		/* I - Source string */
	size_t      size)		/* I - Size of destination string buffer */
{
  size_t	srclen;			/* Length of source string */


 /*
  * Figure out how much room is needed...
  */

  size --;

  srclen = strlen(src);

 /*
  * Copy the appropriate amount...
  */

  if (srclen > size)
    srclen = size;

  memmove(dst, src, srclen);
  dst[srclen] = '\0';

  return (srclen);
}
#endif /* !HAVE_STRLCPY */

/*
 * '_cupsStrFormatd()' - Format a floating-point number.
 */

char *					/* O - Pointer to end of string */
_cupsStrFormatd(char         *buf,	/* I - String */
                char         *bufend,	/* I - End of string buffer */
		double       number,	/* I - Number to format */
                struct lconv *loc)	/* I - Locale data */
{
  char		*bufptr,		/* Pointer into buffer */
		temp[1024],		/* Temporary string */
		*tempdec,		/* Pointer to decimal point */
		*tempptr;		/* Pointer into temporary string */
  const char	*dec;			/* Decimal point */
  int		declen;			/* Length of decimal point */


 /*
  * Format the number using the "%.12f" format and then eliminate
  * unnecessary trailing 0's.
  */

  snprintf(temp, sizeof(temp), "%.12f", number);
  for (tempptr = temp + strlen(temp) - 1;
       tempptr > temp && *tempptr == '0';
       *tempptr-- = '\0');

 /*
  * Next, find the decimal point...
  */

  if (loc && loc->decimal_point) {
    dec    = loc->decimal_point;
    declen = (int)strlen(dec);
  } else {
    dec    = ".";
    declen = 1;
  }

  if (declen == 1)
    tempdec = strchr(temp, *dec);
  else
    tempdec = strstr(temp, dec);

 /*
  * Copy everything up to the decimal point...
  */

  if (tempdec) {
    for (tempptr = temp, bufptr = buf;
         tempptr < tempdec && bufptr < bufend;
	 *bufptr++ = *tempptr++);

    tempptr += declen;

    if (*tempptr && bufptr < bufend) {
      *bufptr++ = '.';

      while (*tempptr && bufptr < bufend)
        *bufptr++ = *tempptr++;
    }

    *bufptr = '\0';
  } else {
    strlcpy(buf, temp, (size_t)(bufend - buf + 1));
    bufptr = buf + strlen(buf);
  }

  return (bufptr);
}


/*
 * '_cups_strcasecmp()' - Do a case-insensitive comparison.
 */

int				/* O - Result of comparison (-1, 0, or 1) */
_cups_strcasecmp(const char *s,	/* I - First string */
                 const char *t)	/* I - Second string */
{
  while (*s != '\0' && *t != '\0') {
    if (_cups_tolower(*s) < _cups_tolower(*t))
      return (-1);
    else if (_cups_tolower(*s) > _cups_tolower(*t))
      return (1);

    s ++;
    t ++;
  }

  if (*s == '\0' && *t == '\0')
    return (0);
  else if (*s != '\0')
    return (1);
  else
    return (-1);
}

/*
 * '_cups_strncasecmp()' - Do a case-insensitive comparison on up to N chars.
 */

int				 /* O - Result of comparison (-1, 0, or 1) */
_cups_strncasecmp(const char *s, /* I - First string */
                  const char *t, /* I - Second string */
		  size_t     n)	 /* I - Maximum number of characters to
				        compare */
{
  while (*s != '\0' && *t != '\0' && n > 0) {
    if (_cups_tolower(*s) < _cups_tolower(*t))
      return (-1);
    else if (_cups_tolower(*s) > _cups_tolower(*t))
      return (1);

    s ++;
    t ++;
    n --;
  }

  if (n == 0)
    return (0);
  else if (*s == '\0' && *t == '\0')
    return (0);
  else if (*s != '\0')
    return (1);
  else
    return (-1);
}


/*
 * 'pwg_compare_sizes()' - Compare two media sizes...
 */

static int				/* O - Result of comparison */
pwg_compare_sizes(cups_size_t *a,	/* I - First media size */
                  cups_size_t *b)	/* I - Second media size */
{
  return (strcmp(a->media, b->media));
}


/*
 * 'pwg_copy_size()' - Copy a media size.
 */

static cups_size_t *			/* O - New media size */
pwg_copy_size(cups_size_t *size)	/* I - Media size to copy */
{
  cups_size_t	*newsize = (cups_size_t *)calloc(1, sizeof(cups_size_t));
					/* New media size */

  if (newsize)
    memcpy(newsize, size, sizeof(cups_size_t));

  return (newsize);
}

static int				/* O  - 1 on success, 0 on failure */
get_url(const char *url,		/* I  - URL to get */
	char       *name,		/* I  - Temporary filename */
	size_t     namesize)		/* I  - Size of temporary filename
					        buffer */
{
  http_t		*http = NULL;
  char			scheme[32],	/* URL scheme */
			userpass[256],	/* URL username:password */
			host[256],	/* URL host */
			resource[256];	/* URL resource */
  int			port;		/* URL port */
  http_encryption_t	encryption;	/* Type of encryption to use */
  http_status_t		status;		/* Status of GET request */
  int			fd;		/* Temporary file */


  if (httpSeparateURI(HTTP_URI_CODING_ALL, url, scheme, sizeof(scheme),
		      userpass, sizeof(userpass), host, sizeof(host), &port,
		      resource, sizeof(resource)) < HTTP_URI_STATUS_OK)
    return (0);

  if (port == 443 || !strcmp(scheme, "https"))
    encryption = HTTP_ENCRYPTION_ALWAYS;
  else
    encryption = HTTP_ENCRYPTION_IF_REQUESTED;

  http = httpConnect2(host, port, NULL, AF_UNSPEC, encryption, 1, 5000, NULL);

  if (!http)
    return (0);

  if ((fd = cupsTempFd(name, (int)namesize)) < 0)
    return (0);

  status = cupsGetFd(http, resource, fd);

  close(fd);
  httpClose(http);

  if (status != HTTP_STATUS_OK) {
    unlink(name);
    *name = '\0';
    return (0);
  }

  return (1);
}

/*
 * '_()' - Simplify copying the ppdCreateFromIPP() function from CUPS,
 *         as we do not do translations of UI strings in cups-browsed
 */

#define _(s) s

/*
 * '_cupsLangString()' - Simplify copying the ppdCreateFromIPP() function
 *                       from CUPS, as we do not do translations of UI strings
 *                       in cups-browsed
 */

const char *
_cupsLangString(cups_lang_t *l, const char *s)
{
  return s;
}

/*
 * '_findCUPSMessageCatalog()' - Find a CUPS message catalog file
 *                               containing human-readable standard
 *                               option and choice names for IPP
 *                               printers
 */

const char *
_searchDirForCatalog(const char *dirname)
{
  const char *catalog = NULL, *c1, *c2;
  cups_dir_t *dir, *subdir;
  cups_dentry_t *subdirentry, *catalogentry;
  char subdirpath[1024], catalogpath[2048], lang[8];
  int i;

  if (dirname == NULL)
    return NULL;

  /* Check first whether we have an English file and prefer this */
  snprintf(catalogpath, sizeof(catalogpath), "%s/en/cups_en.po", dirname);
  if (access(catalogpath, R_OK) == 0) {
    /* Found */
    catalog = strdup(catalogpath);
    return catalog;
  }

  if ((dir = cupsDirOpen(dirname)) == NULL)
    return NULL;

  while ((subdirentry = cupsDirRead(dir)) != NULL) {
    /* Do we actually have a subdir? */
    if (!S_ISDIR(subdirentry->fileinfo.st_mode))
      continue;
    /* Check format of subdir name */
    c1 = subdirentry->filename;
    if (c1[0] < 'a' || c1[0] > 'z' || c1[1] < 'a' || c1[1] > 'z')
      continue;
    if (c1[2] >= 'a' && c1[2] <= 'z')
      i = 3;
    else
      i = 2;
    if (c1[i] == '_') {
      i ++;
      if (c1[i] < 'A' || c1[i] > 'Z' || c1[i+1] < 'A' || c1[i+1] > 'Z')
	continue;
      i += 2;
      if (c1[i] >= 'A' && c1[i] <= 'Z')
	i ++;
    }
    if (c1[i] != '\0' && c1[i] != '@')
      continue;
    strncpy(lang, c1, i);
    lang[i] = '\0';
    snprintf(subdirpath, sizeof(subdirpath), "%s/%s", dirname, c1);
    if ((subdir = cupsDirOpen(subdirpath)) != NULL) {
      while ((catalogentry = cupsDirRead(subdir)) != NULL) {
	/* Do we actually have a regular file? */
	if (!S_ISREG(catalogentry->fileinfo.st_mode))
	  continue;
	/* Check format of catalog name */
	c2 = catalogentry->filename;
	if (strlen(c2) < 10 || strncmp(c2, "cups_", 5) != 0 ||
	    strncmp(c2 + 5, lang, i) != 0 ||
	    strcmp(c2 + strlen(c2) - 3, ".po"))
	  continue;
	/* Is catalog readable ? */
	snprintf(catalogpath, sizeof(catalogpath), "%s/%s", subdirpath, c2);
	if (access(catalogpath, R_OK) != 0)
	  continue;
	/* Found */
	catalog = strdup(catalogpath);
	break;
      }
      cupsDirClose(subdir);
      if (catalog != NULL)
	break;
    }
  }

  cupsDirClose(dir);
  return catalog;
}

const char *
_findCUPSMessageCatalog(const char *preferreddir)
{
  const char *catalog = NULL, *c;
  char buf[1024];

  /* Directory supplied by calling program, from config file,
     environment variable, ... */
  if ((catalog = _searchDirForCatalog(preferreddir)) != NULL)
    goto found;

  /* Directory supplied by environment variable CUPS_LOCALEDIR */
  if ((catalog = _searchDirForCatalog(getenv("CUPS_LOCALEDIR"))) != NULL)
    goto found;

  /* Determine CUPS datadir (usually /usr/share/cups) */
  if ((c = getenv("CUPS_DATADIR")) == NULL)
    c = CUPS_DATADIR;

  /* Search /usr/share/cups/locale/ (location which
     Debian/Ubuntu package of CUPS is using) */
  snprintf(buf, sizeof(buf), "%s/locale", c);
  if ((catalog = _searchDirForCatalog(buf)) != NULL)
    goto found;

  /* Search /usr/(local/)share/locale/ (standard location
     which CUPS is using on Linux) */
  snprintf(buf, sizeof(buf), "%s/../locale", c);
  if ((catalog = _searchDirForCatalog(buf)) != NULL)
    goto found;

  /* Search /usr/(local/)lib/locale/ (standard location
     which CUPS is using on many non-Linux systems) */
  snprintf(buf, sizeof(buf), "%s/../../lib/locale", c);
  if ((catalog = _searchDirForCatalog(buf)) != NULL)
    goto found;

 found:
  return catalog;
}

/* Data structure for IPP choice name and human-readable string */
typedef struct ipp_choice_strings_s {
  char *name, *human_readable;
} ipp_choice_strings_t;

/* Data structure for IPP option name, human-readable string, and choice list */
typedef struct ipp_opt_strings_s {
  char *name, *human_readable;
  cups_array_t *choices;
} ipp_opt_strings_t;

int
compare_choices(void *a, void *b, void *user_data)
{
  return strcasecmp(((ipp_choice_strings_t *)a)->name,
		    ((ipp_choice_strings_t *)b)->name);
}

int
compare_options(void *a, void *b, void *user_data)
{
  return strcasecmp(((ipp_opt_strings_t *)a)->name,
		    ((ipp_opt_strings_t *)b)->name);
}

void
free_choice_strings(void* entry, void* user_data)
{
  ipp_choice_strings_t *entry_rec = (ipp_choice_strings_t *)entry;

  if (entry_rec) {
    if (entry_rec->name) free(entry_rec->name);
    if (entry_rec->human_readable) free(entry_rec->human_readable);
    free(entry_rec);
  }
}

void
free_opt_strings(void* entry, void* user_data)
{
  ipp_opt_strings_t *entry_rec = (ipp_opt_strings_t *)entry;

  if (entry_rec) {
    if (entry_rec->name) free(entry_rec->name);
    if (entry_rec->human_readable) free(entry_rec->human_readable);
    if (entry_rec->choices) cupsArrayDelete(entry_rec->choices);
    free(entry_rec);
  }
}

cups_array_t *
optArrayNew()
{
  return cupsArrayNew3(compare_options, NULL, NULL, 0,
		       NULL, free_opt_strings);
}

ipp_opt_strings_t *
find_opt_in_array(cups_array_t *options, char *name)
{
  ipp_opt_strings_t opt;

  if (!name || !options)
    return NULL;

  opt.name = name;
  return cupsArrayFind(options, &opt);
}

ipp_choice_strings_t *
find_choice_in_array(cups_array_t *choices, char *name)
{
  ipp_choice_strings_t choice;

  if (!name || !choices)
    return NULL;

  choice.name = name;
  return cupsArrayFind(choices, &choice);
}

ipp_opt_strings_t *
add_opt_to_array(char *name, char *human_readable, cups_array_t *options)
{
  ipp_opt_strings_t *opt = NULL;

  if (!name || !options)
    return NULL;

  if ((opt = find_opt_in_array(options, name)) == NULL) {
    opt = calloc(1, sizeof(ipp_opt_strings_t));
    if (!opt) return NULL;
    opt->human_readable = NULL;
    opt->choices = cupsArrayNew3(compare_choices, NULL, NULL, 0,
				 NULL, free_choice_strings);
    if (!opt->choices) {
      free(opt);
      return NULL;
    }
    opt->name = strdup(name);
    if (!cupsArrayAdd(options, opt)) {
      free_opt_strings(opt, NULL);
      return NULL;
    }
  }

  if (human_readable)
    opt->human_readable = strdup(human_readable);

  return opt;
}

ipp_choice_strings_t *
add_choice_to_array(char *name, char *human_readable, char *opt_name,
		    cups_array_t *options)
{
  ipp_choice_strings_t *choice = NULL;
  ipp_opt_strings_t *opt;

  if (!name || !human_readable || !opt_name || !options)
    return NULL;

  opt = add_opt_to_array(opt_name, NULL, options);
  if (!opt) return NULL;

  if ((choice = find_choice_in_array(opt->choices, name)) == NULL) {
    choice = calloc(1, sizeof(ipp_choice_strings_t));
    if (!choice) return NULL;
    choice->human_readable = NULL;
    choice->name = strdup(name);
    if (!cupsArrayAdd(opt->choices, choice)) {
      free_choice_strings(choice, NULL);
      return NULL;
    }
  }

  if (human_readable)
    choice->human_readable = strdup(human_readable);

  return choice;

}

char *
lookup_option(char *name, cups_array_t *options,
	      cups_array_t *printer_options)
{
  ipp_opt_strings_t *opt = NULL;

  if (!name || !options)
    return NULL;

  if (printer_options &&
      (opt = find_opt_in_array(printer_options, name)) != NULL)
    return opt->human_readable;
  if ((opt = find_opt_in_array(options, name)) != NULL)
    return opt->human_readable;
  else
    return NULL;
}

char *
lookup_choice(char *name, char *opt_name, cups_array_t *options,
	      cups_array_t *printer_options)
{
  ipp_opt_strings_t *opt = NULL;
  ipp_choice_strings_t *choice = NULL;

  if (!name || !opt_name || !options)
    return NULL;

  if (printer_options &&
      (opt = find_opt_in_array(printer_options, opt_name)) != NULL &&
      (choice = find_choice_in_array(opt->choices, name)) != NULL)
    return choice->human_readable;
  else if ((opt = find_opt_in_array(options, opt_name)) != NULL &&
	   (choice = find_choice_in_array(opt->choices, name)) != NULL)
    return choice->human_readable;
  else
    return NULL;
}

void
load_opt_strings_catalog(const char *location, cups_array_t *options)
{
  char tmpfile[1024];
  const char *filename = NULL;
  struct stat statbuf;
  cups_file_t *fp;
  char line[65536];
  char *ptr, *start, *start2, *end, *end2, *sep;
  char *opt_name = NULL, *choice_name = NULL,
       *human_readable = NULL;
  int part = -1; /* -1: before first "msgid" or invalid
		        line
		     0: "msgid"
		     1: "msgstr"
		     2: "..." = "..."
		    10: EOF, save last entry */
  int digit;

  if (location == NULL || (strncasecmp(location, "http:", 5) &&
			   strncasecmp(location, "https:", 6))) {
    if (location == NULL ||
	(stat(location, &statbuf) == 0 &&
	 S_ISDIR(statbuf.st_mode))) /* directory? */
      filename = _findCUPSMessageCatalog(location);
    else
      filename = location;
  } else {
    if (get_url(location, tmpfile, sizeof(tmpfile)))
      filename = tmpfile;
  }
  if (!filename)
    return;

  if ((fp = cupsFileOpen(filename, "r")) == NULL)
    return;

  while (cupsFileGets(fp, line, sizeof(line)) || (part = 10)) {
    /* Find a pair of quotes delimiting a string in each line
       and optional "msgid" or "msgstr" keywords, or a
       "..." = "..." pair. Skip comments ('#') and empty lines. */
    if (part < 10) {
      ptr = line;
      while (isspace(*ptr)) ptr ++;
      if (*ptr == '#' || *ptr == '\0') continue;
      if ((start = strchr(ptr, '\"')) == NULL) continue;
      if ((end = strrchr(ptr, '\"')) == start) continue;
      if (*(end - 1) == '\\') continue;
      start2 = NULL;
      end2 = NULL;
      if (start > ptr) {
	if (*(start - 1) == '\\') continue;
	if (strncasecmp(ptr, "msgid", 5) == 0) part = 0;
	if (strncasecmp(ptr, "msgstr", 6) == 0) part = 1;
      } else {
	start2 = ptr;
	while ((start2 = strchr(start2 + 1, '\"')) < end &&
	       *(start2 - 1) == '\\');
	if (start2 < end) {
	  /* Line with "..." = "..." of text/strings format */
	  end2 = end;
	  end = start2;
	  start2 ++;
	  while (isspace(*start2)) start2 ++;
	  if (*start2 != '=') continue;
	  start2 ++;
	  while (isspace(*start2)) start2 ++;
	  if (*start2 != '\"') continue;
	  start2 ++;
	  *end2 = '\0';
	  part = 2;
	} else
	  /* Continuation line in message catalog file */
	  start2 = NULL;
      }
      start ++;
      *end = '\0';
    }
    /* Read out the strings between the quotes and save entries */
    if (part == 0 || part == 2 || part == 10) {
      /* Save previous attribute */
      if (human_readable) {
	if (opt_name) {
	  if (choice_name) {
	    add_choice_to_array(choice_name, human_readable,
				opt_name, options);
	    free(choice_name);
	  } else
	    add_opt_to_array(opt_name, human_readable, options);
	  free(opt_name);
	}
	free(human_readable);
	opt_name = NULL;
	choice_name = NULL;
	human_readable = NULL;
      }
      /* Stop the loop after saving the last entry */
      if (part == 10)
	break;
      /* IPP attribute has to be defined with a single msgid line,
	 no continuation lines */
      if (opt_name) {
	free (opt_name);
	opt_name = NULL;
	if (choice_name) {
	  free (choice_name);
	  choice_name = NULL;
	}
	part = -1;
	continue;
      }
      /* No continuation line in text/strings format */
      if (part == 2 && (start2 == NULL || end2 == NULL)) {
	part = -1;
	continue;
      }
      /* Check line if it is a valid IPP attribute:
	 No spaces, only lowercase letters, digits, '-', '_',
	 "option" or "option.choice" */
      for (ptr = start, sep = NULL; ptr < end; ptr ++)
	if (*ptr == '.') { /* Separator between option and choice */
	  if (!sep) { /* Only the first '.' counts */
	    sep = ptr + 1;
	    *ptr = '\0';
	  }
	} else if (!((*ptr >= 'a' && *ptr <= 'z') ||
		     (*ptr >= '0' && *ptr <= '9') ||
		     *ptr == '-' || *ptr == '_'))
	  break;
      if (ptr < end) { /* Illegal character found */
	part = -1;
	continue;
      }
      if (strlen(start) > 0) /* Option name found */
	opt_name = strdup(start);
      else { /* Empty option name */
	part = -1;
	continue;
      }
      if (sep && strlen(sep) > 0) /* Choice name found */
	choice_name = strdup(sep);
      else /* Empty choice name */
	choice_name = NULL;
      if (part == 2) { /* Human-readable string in the same line */
	start = start2;
	end = end2;
      }
    }
    if (part == 1 || part == 2) {
      /* msgid was not for an IPP attribute, ignore this msgstr */
      if (!opt_name) continue;
      /* Empty string */
      if (start == end) continue;
      /* Unquote string */
      ptr = start;
      end = start;
      while (*ptr) {
	if (*ptr == '\\') {
	  ptr ++;
	  if (isdigit(*ptr)) {
	    digit = 0;
	    *end = 0;
	    while (isdigit(*ptr) && digit < 3) {
	      *end = *end * 8 + *ptr - '0';
	      digit ++;
	      ptr ++;
	    }
	    end ++;
	  } else {
	    if (*ptr == 'n')
	      *end ++ = '\n';
	    else if (*ptr == 'r')
	      *end ++ = '\r';
	    else if (*ptr == 't')
	      *end ++ = '\t';
	    else
	      *end ++ = *ptr;
	    ptr ++;
	  }
	} else
	  *end ++ = *ptr ++;
      }
      *end = '\0';
      /* Did the unquoting make the string empty? */
      if (strlen(start) == 0) continue;
      /* Add the string to our human-readable string */
      if (human_readable) { /* Continuation line */
	human_readable = realloc(human_readable,
				 sizeof(char) *
				 (strlen(human_readable) +
				  strlen(start) + 2));
	ptr = human_readable + strlen(human_readable);
	*ptr = ' ';
	strlcpy(ptr + 1, start, strlen(start) + 1);
      } else { /* First line */
	human_readable = malloc(sizeof(char) *
				(strlen(start) + 1));
	strlcpy(human_readable, start, strlen(start) + 1);
      }
    }
  }
  cupsFileClose(fp);
  if (choice_name != NULL)
    free(choice_name);
  if (opt_name != NULL)
    free(opt_name);
  if (filename == tmpfile)
    unlink(filename);
}


int
compare_resolutions(void *resolution_a, void *resolution_b,
		    void *user_data)
{
  res_t *res_a = (res_t *)resolution_a;
  res_t *res_b = (res_t *)resolution_b;
  int i, a, b;

  /* Compare the pixels per square inch */
  a = res_a->x * res_a->y;
  b = res_b->x * res_b->y;
  i = (a > b) - (a < b);
  if (i) return i;

  /* Compare how much the pixel shape deviates from a square, the
     more, the worse */
  a = 100 * res_a->y / res_a->x;
  if (a > 100) a = 10000 / a; 
  b = 100 * res_b->y / res_b->x;
  if (b > 100) b = 10000 / b; 
  return (a > b) - (a < b);
}

void *
copy_resolution(void *resolution, void *user_data)
{
  res_t *res = (res_t *)resolution;
  res_t *copy;

  copy = (res_t *)calloc(1, sizeof(res_t));
  if (copy) {
    copy->x = res->x;
    copy->y = res->y;
  }

  return copy;
}

void
free_resolution(void *resolution, void *user_data)
{
  res_t *res = (res_t *)resolution;

  if (res) free(res);
}

cups_array_t *
resolutionArrayNew()
{
  return cupsArrayNew3(compare_resolutions, NULL, NULL, 0,
		       copy_resolution, free_resolution);
}

res_t *
resolutionNew(int x, int y)
{
  res_t *res = (res_t *)calloc(1, sizeof(res_t));
  if (res) {
    res->x = x;
    res->y = y;
  }
  return res;
}

/* Read a single resolution from an IPP attribute, take care of
   obviously wrong entries (printer firmware bugs), ignoring
   resolutions of less than 75 dpi in at least one dimension and
   fixing Brother's "600x2dpi" resolutions. */
res_t *
ippResolutionToRes(ipp_attribute_t *attr, int index)
{
  res_t *res = NULL;
  int x = 0, y = 0;

  if (attr) {
    ipp_tag_t tag = ippGetValueTag(attr);
    int count = ippGetCount(attr);

    if (tag == IPP_TAG_RESOLUTION && index < count) {
      pwg_ppdize_resolution(attr, index, &x, &y, NULL, 0);
      if (y == 2) y = x; /* Brother quirk ("600x2dpi") */
      if (x >= 75 && y >= 75)
	res = resolutionNew(x, y);
    }
  }

  return res;
}

cups_array_t *
ippResolutionListToArray(ipp_attribute_t *attr)
{
  cups_array_t *res_array = NULL;
  res_t *res;
  int i;

  if (attr) {
    ipp_tag_t tag = ippGetValueTag(attr);
    int count = ippGetCount(attr);

    if (tag == IPP_TAG_RESOLUTION && count > 0) {
      res_array = resolutionArrayNew();
      if (res_array) {
	for (i = 0; i < count; i ++)
	  if ((res = ippResolutionToRes(attr, i)) != NULL &&
	      cupsArrayFind(res_array, res) == NULL)
	    cupsArrayAdd(res_array, res);
      }
      if (cupsArrayCount(res_array) == 0) {
	cupsArrayDelete(res_array);
	res_array = NULL;
      }
    }
  }

  return res_array;
}

/* Build up an array of common resolutions and most desirable default
   resolution from multiple arrays of resolutions with an optional
   default resolution.
   Call this function with each resolution array you find as "new", and
   in "current" an array of the common resolutions will be built up.
   You do not need to create an empty array for "current" before
   starting. Initialize it with NULL.
   "current_default" holds the default resolution of the array "current".
   It will get replaced by "new_default" if "current_default" is either
   NULL or a resolution which is not in "current" any more.
   "new" and "new_default" will be deleted/freed and set to NULL after
   each, successful or unsuccssful operation.
   Note that when calling this function the addresses of the pointers
   to the resolution arrays and default resolutions have to be given
   (call by reference) as all will get modified by the function. */

int /* 1 on success, 0 on failure */
joinResolutionArrays(cups_array_t **current, cups_array_t **new,
		     res_t **current_default, res_t **new_default)
{
  res_t *res;
  int retval;

  if (current == NULL || new == NULL || *new == NULL ||
      cupsArrayCount(*new) == 0) {
    retval = 0;
    goto finish;
  }

  if (*current == NULL) {
    /* We are adding the very first resolution array, simply make it
       our common resolutions array */
    *current = *new;
    if (current_default) {
      if (*current_default)
	free(*current_default);
      *current_default = (new_default ? *new_default : NULL);
    }
    return 1;
  } else if (cupsArrayCount(*current) == 0) {
    retval = 1;
    goto finish;
  }

  /* Dry run: Check whether the two array have at least one resolution
     in common, if not, do not touch the original array */
  for (res = cupsArrayFirst(*current);
       res; res = cupsArrayNext(*current))
    if (cupsArrayFind(*new, res))
      break;

  if (res) {
    /* Reduce the original array to the resolutions which are in both
       the original and the new array, at least one resolution will
       remain. */
    for (res = cupsArrayFirst(*current);
	 res; res = cupsArrayNext(*current))
      if (!cupsArrayFind(*new, res))
	cupsArrayRemove(*current, res);
    if (current_default) {
      /* Replace the current default by the new one if the current default
	 is not in the array any more or if it is NULL. If the new default
	 is not in the list or NULL in such a case, set the current default
	 to NULL */
      if (*current_default && !cupsArrayFind(*current, *current_default)) {
	free(*current_default);
	*current_default = NULL;
      }
      if (*current_default == NULL && new_default && *new_default &&
	  cupsArrayFind(*current, *new_default))
	*current_default = copy_resolution(*new_default, NULL);
    }
    retval = 1;
  } else
    retval = 0;

 finish:
  if (new && *new) {
    cupsArrayDelete(*new);
    *new = NULL;
  }
  if (new_default && *new_default) {
    free(*new_default);
    *new_default = NULL;
  }
  return retval;
}

cups_array_t* generate_sizes(ipp_t *response,
                             ipp_attribute_t **defattr,
                             int* min_length,
                             int* min_width,
                             int* max_length,
                             int* max_width,
                             int* bottom,
                             int* left,
                             int* right,
                             int* top,
                             char* ppdname) 
{
  cups_array_t             *sizes;               /* Media sizes we've added */
  ipp_attribute_t          *attr,                /* xxx-supported */
                           *x_dim, *y_dim;       /* Media dimensions */
  ipp_t                    *media_col,           /* Media collection */
                           *media_size;          /* Media size collection */
  int                      i,count = 0;
  pwg_media_t              *pwg;                 /* PWG media size */
  int                      left_def,right_def,bottom_def,top_def;
  ipp_attribute_t          *margin;  /* media-xxx-margin attribute */
  const char               *psname;

  if ((attr = ippFindAttribute(response, "media-bottom-margin-supported",
			       IPP_TAG_INTEGER)) != NULL) {
    for (i = 1, *bottom = ippGetInteger(attr, 0), count = ippGetCount(attr);
	 i < count; i ++)
      if (ippGetInteger(attr, i) > *bottom)
        *bottom = ippGetInteger(attr, i);
  } else
    *bottom = 1270;

  if ((attr = ippFindAttribute(response, "media-left-margin-supported",
			       IPP_TAG_INTEGER)) != NULL) {
    for (i = 1, *left = ippGetInteger(attr, 0), count = ippGetCount(attr);
	 i < count; i ++)
      if (ippGetInteger(attr, i) > *left)
        *left = ippGetInteger(attr, i);
  } else
    *left = 635;

  if ((attr = ippFindAttribute(response, "media-right-margin-supported",
			       IPP_TAG_INTEGER)) != NULL) {
    for (i = 1, *right = ippGetInteger(attr, 0), count = ippGetCount(attr);
	 i < count; i ++)
      if (ippGetInteger(attr, i) > *right)
        *right = ippGetInteger(attr, i);
  } else
    *right = 635;

  if ((attr = ippFindAttribute(response, "media-top-margin-supported",
			       IPP_TAG_INTEGER)) != NULL) {
    for (i = 1, *top = ippGetInteger(attr, 0), count = ippGetCount(attr);
	 i < count; i ++)
      if (ippGetInteger(attr, i) > *top)
        *top = ippGetInteger(attr, i);
  } else
    *top = 1270;

  if ((*defattr = ippFindAttribute(response, "media-col-default",
				   IPP_TAG_BEGIN_COLLECTION)) != NULL) {
    if ((attr = ippFindAttribute(ippGetCollection(*defattr, 0), "media-size",
				 IPP_TAG_BEGIN_COLLECTION)) != NULL) {
      media_size = ippGetCollection(attr, 0);
      x_dim      = ippFindAttribute(media_size, "x-dimension", IPP_TAG_INTEGER);
      y_dim      = ippFindAttribute(media_size, "y-dimension", IPP_TAG_INTEGER);
  
      if ((margin = ippFindAttribute(ippGetCollection(*defattr, 0),
				     "media-bottom-margin", IPP_TAG_INTEGER))
	  != NULL)
	bottom_def = ippGetInteger(margin, 0);
      else
	bottom_def = *bottom;

      if ((margin = ippFindAttribute(ippGetCollection(*defattr, 0),
				     "media-left-margin", IPP_TAG_INTEGER))
	  != NULL)
	left_def = ippGetInteger(margin, 0);
      else
	left_def = *left;

      if ((margin = ippFindAttribute(ippGetCollection(*defattr, 0),
				     "media-right-margin", IPP_TAG_INTEGER))
	  != NULL)
	right_def = ippGetInteger(margin, 0);
      else
	right_def = *right;

      if ((margin = ippFindAttribute(ippGetCollection(*defattr, 0),
				     "media-top-margin", IPP_TAG_INTEGER))
	  != NULL)
	top_def = ippGetInteger(margin, 0);
      else
	top_def = *top;

      if (x_dim && y_dim &&
	  (pwg = pwgMediaForSize(ippGetInteger(x_dim, 0),
				 ippGetInteger(y_dim, 0))) != NULL) {
	psname = (pwg->ppd != NULL ? pwg->ppd : pwg->pwg);
        if (bottom_def == 0 && left_def == 0 && right_def == 0 && top_def == 0)
          snprintf(ppdname, PPD_MAX_NAME, "%s.Borderless", psname);
        else
          strlcpy(ppdname, psname, PPD_MAX_NAME);
      } else
	strlcpy(ppdname, "Unknown", PPD_MAX_NAME);
    } else
      strlcpy(ppdname, "Unknown", PPD_MAX_NAME);
  } else if ((pwg =
	      pwgMediaForPWG(ippGetString(ippFindAttribute(response,
							   "media-default",
							   IPP_TAG_ZERO), 0,
					  NULL))) != NULL) {
    psname = (pwg->ppd != NULL ? pwg->ppd : pwg->pwg);
    strlcpy(ppdname, psname, PPD_MAX_NAME);
  } else
    strlcpy(ppdname, "Unknown", PPD_MAX_NAME);

  sizes = cupsArrayNew3((cups_array_func_t)pwg_compare_sizes, NULL, NULL, 0,
			(cups_acopy_func_t)pwg_copy_size,
			(cups_afree_func_t)free);

  if ((attr = ippFindAttribute(response, "media-col-database",
			       IPP_TAG_BEGIN_COLLECTION)) != NULL) {
    for (i = 0, count = ippGetCount(attr); i < count; i ++) {
      cups_size_t temp;   /* Current size */

      media_col   = ippGetCollection(attr, i);
      media_size  =
	ippGetCollection(ippFindAttribute(media_col, "media-size",
					  IPP_TAG_BEGIN_COLLECTION), 0);
      x_dim       = ippFindAttribute(media_size, "x-dimension", IPP_TAG_ZERO);
      y_dim       = ippFindAttribute(media_size, "y-dimension", IPP_TAG_ZERO);
      pwg         = pwgMediaForSize(ippGetInteger(x_dim, 0),
				    ippGetInteger(y_dim, 0));

      if (pwg) {
	temp.width  = pwg->width;
	temp.length = pwg->length;

	if ((margin = ippFindAttribute(media_col, "media-bottom-margin",
				       IPP_TAG_INTEGER)) != NULL)
	  temp.bottom = ippGetInteger(margin, 0);
	else
	  temp.bottom = *bottom;

	if ((margin = ippFindAttribute(media_col, "media-left-margin",
				       IPP_TAG_INTEGER)) != NULL)
	  temp.left = ippGetInteger(margin, 0);
	else
	  temp.left = *left;

	if ((margin = ippFindAttribute(media_col, "media-right-margin",
				       IPP_TAG_INTEGER)) != NULL)
	  temp.right = ippGetInteger(margin, 0);
	else
	  temp.right = *right;

	if ((margin = ippFindAttribute(media_col, "media-top-margin",
				       IPP_TAG_INTEGER)) != NULL)
	  temp.top = ippGetInteger(margin, 0);
	else
	  temp.top = *top;

	psname = (pwg->ppd != NULL ? pwg->ppd : pwg->pwg);
	if (temp.bottom == 0 && temp.left == 0 && temp.right == 0 &&
	    temp.top == 0)
	  snprintf(temp.media, sizeof(temp.media), "%s.Borderless", psname);
	else
	  strlcpy(temp.media, psname, sizeof(temp.media));

	if (!cupsArrayFind(sizes, &temp))
	  cupsArrayAdd(sizes, &temp);
      } else if (ippGetValueTag(x_dim) == IPP_TAG_RANGE ||
		 ippGetValueTag(y_dim) == IPP_TAG_RANGE) {
	/*
	 * Custom size - record the min/max values...
	 */

	int lower, upper;   /* Range values */

	if (ippGetValueTag(x_dim) == IPP_TAG_RANGE)
	  lower = ippGetRange(x_dim, 0, &upper);
	else
	  lower = upper = ippGetInteger(x_dim, 0);

	if (lower < *min_width)
	  *min_width = lower;
	if (upper > *max_width)
	  *max_width = upper;

	if (ippGetValueTag(y_dim) == IPP_TAG_RANGE)
	  lower = ippGetRange(y_dim, 0, &upper);
	else
	  lower = upper = ippGetInteger(y_dim, 0);

	if (lower < *min_length)
	  *min_length = lower;
	if (upper > *max_length)
	  *max_length = upper;
      }
    }
  }
  if ((attr = ippFindAttribute(response, "media-size-supported",
			       IPP_TAG_BEGIN_COLLECTION)) != NULL) {
    for (i = 0, count = ippGetCount(attr); i < count; i ++) {
      cups_size_t temp;   /* Current size */

      media_size  = ippGetCollection(attr, i);
      x_dim       = ippFindAttribute(media_size, "x-dimension", IPP_TAG_ZERO);
      y_dim       = ippFindAttribute(media_size, "y-dimension", IPP_TAG_ZERO);
      pwg         = pwgMediaForSize(ippGetInteger(x_dim, 0),
				    ippGetInteger(y_dim, 0));

      if (pwg) {
	temp.width  = pwg->width;
	temp.length = pwg->length;
	temp.bottom = *bottom;
	temp.left   = *left;
	temp.right  = *right;
	temp.top    = *top;

	psname = (pwg->ppd != NULL ? pwg->ppd : pwg->pwg);
	if (temp.bottom == 0 && temp.left == 0 && temp.right == 0 &&
	    temp.top == 0)
	  snprintf(temp.media, sizeof(temp.media), "%s.Borderless", psname);
	else
	  strlcpy(temp.media, psname, sizeof(temp.media));

	if (!cupsArrayFind(sizes, &temp))
	  cupsArrayAdd(sizes, &temp);
      } else if (ippGetValueTag(x_dim) == IPP_TAG_RANGE ||
		 ippGetValueTag(y_dim) == IPP_TAG_RANGE) {
	/*
	 * Custom size - record the min/max values...
	 */

	int lower, upper;   /* Range values */

	if (ippGetValueTag(x_dim) == IPP_TAG_RANGE)
	  lower = ippGetRange(x_dim, 0, &upper);
	else
	  lower = upper = ippGetInteger(x_dim, 0);

	if (lower < *min_width)
	  *min_width = lower;
	if (upper > *max_width)
	  *max_width = upper;

	if (ippGetValueTag(y_dim) == IPP_TAG_RANGE)
	  lower = ippGetRange(y_dim, 0, &upper);
	else
	  lower = upper = ippGetInteger(y_dim, 0);

	if (lower < *min_length)
	  *min_length = lower;
	if (upper > *max_length)
	  *max_length = upper;
      }
    }
  }
  if ((attr = ippFindAttribute(response, "media-supported", IPP_TAG_ZERO))
      != NULL) {
    for (i = 0, count = ippGetCount(attr); i < count; i ++) {
      const char  *pwg_size = ippGetString(attr, i, NULL);
      /* PWG size name */
      cups_size_t temp, *temp2; /* Current size, found size */

      if ((pwg = pwgMediaForPWG(pwg_size)) != NULL) {
        if (strstr(pwg_size, "_max_") || strstr(pwg_size, "_max.")) {
          if (pwg->width > *max_width)
            *max_width = pwg->width;
          if (pwg->length > *max_length)
            *max_length = pwg->length;
        } else if (strstr(pwg_size, "_min_") || strstr(pwg_size, "_min.")) {
          if (pwg->width < *min_width)
            *min_width = pwg->width;
          if (pwg->length < *min_length)
            *min_length = pwg->length;
        } else {
	  temp.width  = pwg->width;
	  temp.length = pwg->length;
	  temp.bottom = *bottom;
	  temp.left   = *left;
	  temp.right  = *right;
	  temp.top    = *top;

	  psname = (pwg->ppd != NULL ? pwg->ppd : pwg->pwg);
	  if (temp.bottom == 0 && temp.left == 0 && temp.right == 0 &&
	      temp.top == 0)
	    snprintf(temp.media, sizeof(temp.media), "%s.Borderless", psname);
	  else
	    strlcpy(temp.media, psname, sizeof(temp.media));

	  /* Add the printer's original IPP name to an already found size */
	  if ((temp2 = cupsArrayFind(sizes, &temp)) != NULL) {
	    snprintf(temp2->media + strlen(temp2->media),
		     sizeof(temp2->media) - strlen(temp2->media),
		     " %s", pwg_size);
	    /* Check if we have also a borderless version of the size and add
	       the original IPP name also there */
	    snprintf(temp.media, sizeof(temp.media), "%s.Borderless", psname);
	    if ((temp2 = cupsArrayFind(sizes, &temp)) != NULL)
	      snprintf(temp2->media + strlen(temp2->media),
		       sizeof(temp2->media) - strlen(temp2->media),
		       " %s", pwg_size);
	  } else
	    cupsArrayAdd(sizes, &temp);
	}
      }
    }
  }
  return sizes;
}

int is_colordevice(const char *keyword,ipp_attribute_t *attr)
{
  if (!strcasecmp(keyword, "sgray_16") || !strncmp(keyword, "W8-16", 5) ||
      !strncmp(keyword, "W16", 3))
    return 1;
  else if (!strcasecmp(keyword, "srgb_8") || !strncmp(keyword, "SRGB24", 6) ||
	   !strcmp(keyword, "color"))
    return 1;
  else if ((!strcasecmp(keyword, "srgb_16") ||
	    !strncmp(keyword, "SRGB48", 6)) &&
	   !ippContainsString(attr, "srgb_8"))
    return 1;
  else if (!strcasecmp(keyword, "adobe-rgb_16") ||
	   !strncmp(keyword, "ADOBERGB48", 10) ||
	   !strncmp(keyword, "ADOBERGB24-48", 13))
    return 1;
  else if ((!strcasecmp(keyword, "adobe-rgb_8") ||
	    !strcmp(keyword, "ADOBERGB24")) &&
	   !ippContainsString(attr, "adobe-rgb_16"))
    return 1;
  else if ((!strcasecmp(keyword, "cmyk_8") &&
	    !ippContainsString(attr, "cmyk_16")) ||
	   !strcmp(keyword, "DEVCMYK32"))
    return 1;
  else if (!strcasecmp(keyword, "cmyk_16") ||
	   !strcmp(keyword, "DEVCMYK32-64") ||
	   !strcmp(keyword, "DEVCMYK64"))
    return 1;
  else if ((!strcasecmp(keyword, "rgb_8") &&
	    !ippContainsString(attr, "rgb_16"))
	   || !strcmp(keyword, "DEVRGB24"))
    return 1;
  else if (!strcasecmp(keyword, "rgb_16") ||
	   !strcmp(keyword, "DEVRGB24-48") ||
	   !strcmp(keyword, "DEVRGB48"))
    return 1;
  return 0;
}

/*
 * 'ppdCreateFromIPP()' - Create a PPD file describing the capabilities
 *                        of an IPP printer (legacy interface).
 */

char *                                           /* O - PPD filename or NULL on
						    error */
ppdCreateFromIPP (char         *buffer,          /* I - Filename buffer */
		  size_t       bufsize,          /* I - Size of filename
						        buffer */
		  ipp_t        *response,        /* I - Get-Printer-Attributes
						        response */
		  const char   *make_model,      /* I - Make and model from
						        DNS-SD */
		  const char   *pdl,             /* I - List of PDLs from
						        DNS-SD */
		  int          color,            /* I - Color printer? (from
						        DNS-SD) */
		  int          duplex)           /* I - Duplex printer? (from
						        DNS-SD) */
{
  return ppdCreateFromIPP2(buffer, bufsize, response, make_model, pdl,
			   color, duplex, NULL, NULL, NULL, NULL);
}

/*
 * 'ppdCreateFromIPP2()' - Create a PPD file describing the capabilities
 *                         of an IPP printer.
 */

char *                                           /* O - PPD filename or NULL on
						    error */
ppdCreateFromIPP2(char         *buffer,          /* I - Filename buffer */
		  size_t       bufsize,          /* I - Size of filename
						        buffer */
		  ipp_t        *response,        /* I - Get-Printer-Attributes
						        response */
		  const char   *make_model,      /* I - Make and model from
						        DNS-SD */
		  const char   *pdl,             /* I - List of PDLs from
						        DNS-SD */
		  int          color,            /* I - Color printer? (from
						        DNS-SD) */
		  int          duplex,           /* I - Duplex printer? (from
						        DNS-SD) */
		  cups_array_t *conflicts,       /* I - Array of constraints */
		  cups_array_t *sizes,           /* I - Media sizes we've
						        added */ 
		  char*        default_pagesize, /* I - Default page size*/
		  const char   *default_cluster_color) /* I - cluster def
							color (if cluster's
							attributes are
							returned) */
{
  cups_file_t		*fp;		/* PPD file */
  cups_array_t		*printer_sizes;	/* Media sizes we've added */
  cups_size_t		*size;		/* Current media size */
  ipp_attribute_t	*attr,		/* xxx-supported */
                        *attr2,
			*defattr,	/* xxx-default */
                        *quality,	/* print-quality-supported */
			*x_dim, *y_dim;	/* Media dimensions */
  ipp_t			*media_col,	/* Media collection */
			*media_size;	/* Media size collection */
  char			make[256],	/* Make and model */
			*model,		/* Model name */
			ppdname[PPD_MAX_NAME];
		    			/* PPD keyword */
  int			i, j,		/* Looping vars */
			count = 0,	/* Number of values */
			bottom,		/* Largest bottom margin */
			left,		/* Largest left margin */
			right,		/* Largest right margin */
			top,		/* Largest top margin */
			max_length = 0,	/* Maximum custom size */
			max_width = 0,
			min_length = INT_MAX,
					/* Minimum custom size */
			min_width = INT_MAX,
			is_apple = 0,	/* Does the printer support Apple
					   Raster? */
                        is_pwg = 0,	/* Does the printer support PWG
					   Raster? */
                        is_pclm = 0,    /* Does the printer support PCLm? */
                        is_pdf = 0;     /* Does the printer support PDF? */
  pwg_media_t		*pwg;		/* PWG media size */
  int			xres, yres;	/* Resolution values */
  cups_array_t          *common_res,    /* Common resolutions of all PDLs */
                        *current_res,   /* Resolutions of current PDL */
                        *pdl_list;      /* List of PDLs */
  res_t                 *common_def,    /* Common default resolution */
                        *current_def,   /* Default resolution of current PDL */
                        *min_res,       /* Minimum common resolution */
                        *max_res;       /* Maximum common resolution */
  cups_lang_t		*lang = cupsLangDefault();
					/* Localization info */
  struct lconv		*loc = localeconv();
					/* Locale data */
  cups_array_t          *printer_opt_strings_catalog = NULL;
                                        /* Printer-specific option UI strings */
  char                  *human_readable,
                        *human_readable2;
  const char		*keyword;	/* Keyword value */
  cups_array_t		*fin_options = NULL;
					/* Finishing options */
  char			buf[256],
                        filter_path[1024];
                                        /* Path to filter executable */
  const char		*cups_serverbin;/* CUPS_SERVERBIN environment
					   variable */
  char			*defaultoutbin = NULL;
  const char		*outbin;
  char			outbin_properties[1024];
  int			octet_str_len;
  void			*outbin_properties_octet;
  int			outputorderinfofound = 0,
			faceupdown = 1,
			firsttolast = 1;
  int			manual_copies = -1;

 /*
  * Range check input...
  */

  if (buffer)
    *buffer = '\0';

  if (!buffer || bufsize < 1) {
    _cupsSetError(IPP_STATUS_ERROR_INTERNAL, strerror(EINVAL), 0);
    return (NULL);
  }

  if (!response) {
    _cupsSetError(IPP_STATUS_ERROR_INTERNAL, _("No IPP attributes."), 1);
    return (NULL);
  }

 /*
  * Open a temporary file for the PPD...
  */

  if ((fp = cupsTempFile2(buffer, (int)bufsize)) == NULL) {
    _cupsSetError(IPP_STATUS_ERROR_INTERNAL, strerror(errno), 0);
    return (NULL);
  }

 /*
  * Standard stuff for PPD file...
  */

  cupsFilePuts(fp, "*PPD-Adobe: \"4.3\"\n");
  cupsFilePuts(fp, "*FormatVersion: \"4.3\"\n");
  cupsFilePrintf(fp, "*FileVersion: \"%s\"\n", VERSION);
  cupsFilePuts(fp, "*LanguageVersion: English\n");
  cupsFilePuts(fp, "*LanguageEncoding: ISOLatin1\n");
  cupsFilePuts(fp, "*PSVersion: \"(3010.000) 0\"\n");
  cupsFilePuts(fp, "*LanguageLevel: \"3\"\n");
  cupsFilePuts(fp, "*FileSystem: False\n");
  cupsFilePuts(fp, "*PCFileName: \"drvless.ppd\"\n");

  if ((attr = ippFindAttribute(response, "printer-make-and-model",
			       IPP_TAG_TEXT)) != NULL)
    strlcpy(make, ippGetString(attr, 0, NULL), sizeof(make));
  else if (make_model && make_model[0] != '\0')
    strlcpy(make, make_model, sizeof(make));
  else
    strlcpy(make, "Unknown Printer", sizeof(make));

  if (!_cups_strncasecmp(make, "Hewlett Packard ", 16) ||
      !_cups_strncasecmp(make, "Hewlett-Packard ", 16)) {
    model = make + 16;
    strlcpy(make, "HP", sizeof(make));
  }
  else if ((model = strchr(make, ' ')) != NULL)
    *model++ = '\0';
  else
    model = make;

  cupsFilePrintf(fp, "*Manufacturer: \"%s\"\n", make);
  cupsFilePrintf(fp, "*ModelName: \"%s %s\"\n", make, model);
  cupsFilePrintf(fp, "*Product: \"(%s %s)\"\n", make, model);
  cupsFilePrintf(fp, "*NickName: \"%s %s, driverless, cups-filters %s\"\n",
		 make, model, VERSION);
  cupsFilePrintf(fp, "*ShortNickName: \"%s %s\"\n", make, model);

  /* Which is the default output bin? */
  if ((attr = ippFindAttribute(response, "output-bin-default", IPP_TAG_ZERO))
      != NULL)
    defaultoutbin = strdup(ippGetString(attr, 0, NULL));
  /* Find out on which position of the list of output bins the default one is,
     if there is no default bin, take the first of this list */
  i = 0;
  if ((attr = ippFindAttribute(response, "output-bin-supported",
			       IPP_TAG_ZERO)) != NULL) {
    count = ippGetCount(attr);
    for (i = 0; i < count; i ++) {
      outbin = ippGetString(attr, i, NULL);
      if (outbin == NULL)
	continue;
      if (defaultoutbin == NULL) {
	defaultoutbin = strdup(outbin);
	break;
      } else if (strcasecmp(outbin, defaultoutbin) == 0)
	break;
    }
  }
  if ((attr = ippFindAttribute(response, "printer-output-tray",
			       IPP_TAG_STRING)) != NULL &&
      i < ippGetCount(attr)) {
    outbin_properties_octet = ippGetOctetString(attr, i, &octet_str_len);
    memset(outbin_properties, 0, sizeof(outbin_properties));
    memcpy(outbin_properties, outbin_properties_octet,
	   ((size_t)octet_str_len < sizeof(outbin_properties) - 1 ?
	    (size_t)octet_str_len : sizeof(outbin_properties) - 1));
    if (strcasestr(outbin_properties, "pagedelivery=faceUp")) {
      outputorderinfofound = 1;
      faceupdown = -1;
    }
    if (strcasestr(outbin_properties, "stackingorder=lastToFirst"))
      firsttolast = -1;
  }
  if (outputorderinfofound == 0 && defaultoutbin &&
      strcasestr(defaultoutbin, "face-up"))
    faceupdown = -1;
  if (defaultoutbin)
    free (defaultoutbin);
  if (firsttolast * faceupdown < 0)
    cupsFilePuts(fp, "*DefaultOutputOrder: Reverse\n");
  else
    cupsFilePuts(fp, "*DefaultOutputOrder: Normal\n");

  /* To decide whether the printer is coloured or not we see the various
     colormodel supported by the printer*/
  if ((attr = ippFindAttribute(response, "urf-supported", IPP_TAG_KEYWORD))
      == NULL)
    if ((attr = ippFindAttribute(response,
				 "pwg-raster-document-type-supported",
				 IPP_TAG_KEYWORD)) == NULL)
      if ((attr = ippFindAttribute(response, "print-color-mode-supported",
				   IPP_TAG_KEYWORD)) == NULL)
        attr = ippFindAttribute(response, "output-mode-supported",
				IPP_TAG_KEYWORD);
  if (attr==NULL || !ippGetCount(attr)) {
    if ((attr = ippFindAttribute(response, "color-supported", IPP_TAG_BOOLEAN))
       != NULL) {
      if(ippGetBoolean(attr, 0))
	cupsFilePuts(fp, "*ColorDevice: True\n");
      else
	cupsFilePuts(fp, "*ColorDevice: False\n");
    } else {
      if(color)
	cupsFilePuts(fp, "*ColorDevice: True\n");
      else
	cupsFilePuts(fp, "*ColorDevice: False\n");
    }
  } else {
    int   colordevice = 0;
    for (i = 0, count = ippGetCount(attr); i < count; i ++) {
      keyword = ippGetString(attr, i, NULL);
      colordevice = is_colordevice(keyword,attr);
      if (colordevice) {
	cupsFilePuts(fp, "*ColorDevice: True\n");
	break;
      }
    }
    if(colordevice==0)
      cupsFilePuts(fp, "*ColorDevice: False\n");
  }

  cupsFilePrintf(fp, "*cupsVersion: %d.%d\n", CUPS_VERSION_MAJOR,
		 CUPS_VERSION_MINOR);
  cupsFilePuts(fp, "*cupsSNMPSupplies: False\n");
  cupsFilePuts(fp, "*cupsLanguages: \"en\"\n");

  if ((attr = ippFindAttribute(response, "printer-more-info", IPP_TAG_URI)) !=
      NULL)
    cupsFilePrintf(fp, "*APSupplies: \"%s\"\n", ippGetString(attr, 0, NULL));

  if ((attr = ippFindAttribute(response, "printer-charge-info-uri",
			       IPP_TAG_URI)) != NULL)
    cupsFilePrintf(fp, "*cupsChargeInfoURI: \"%s\"\n", ippGetString(attr, 0,
								    NULL));

  /* Message catalogs for UI strings */
  if (opt_strings_catalog == NULL) {
    opt_strings_catalog = optArrayNew();
    load_opt_strings_catalog(NULL, opt_strings_catalog);
  }
  if ((attr = ippFindAttribute(response, "printer-strings-uri",
			       IPP_TAG_URI)) != NULL) {
    printer_opt_strings_catalog = optArrayNew();
    load_opt_strings_catalog(ippGetString(attr, 0, NULL),
			     printer_opt_strings_catalog);
    if (printer_opt_strings_catalog)
      cupsFilePrintf(fp, "*cupsStringsURI: \"%s\"\n", ippGetString(attr, 0,
								   NULL));
  }

 /*
  * PDLs and common resolutions ...
  */

  common_res = NULL;
  current_res = NULL;
  common_def = NULL;
  current_def = NULL;
  min_res = NULL;
  max_res = NULL;
  /* Put all available PDls into a simple case-insensitevely searchable
     sorted string list */
  if ((pdl_list = cupsArrayNew3((cups_array_func_t)strcasecmp, NULL, NULL, 0,
				(cups_acopy_func_t)strdup,
				(cups_afree_func_t)free)) == NULL)
    goto bad_ppd;
  int formatfound = 0;

  if (((attr = ippFindAttribute(response, "document-format-supported",
				IPP_TAG_MIMETYPE)) != NULL) ||
      (pdl && pdl[0] != '\0')) {
    const char *format = pdl;
    i = 0;
    count = ippGetCount(attr);
    while ((attr && i < count) || /* Go through formats in attribute */
	   (!attr && pdl && pdl[0] != '\0' && format[0] != '\0')) {
      /* Go through formats in pdl string (from DNS-SD record) */

      /* Pick next format from attribute */
      if (attr) format = ippGetString(attr, i, NULL);
      /* Add format to list of supported PDLs, skip duplicates */
      if (!cupsArrayFind(pdl_list, (void *)format))
	cupsArrayAdd(pdl_list, (void *)format);
      if (attr)
	/* Next format in attribute */
	i ++;
      else {
	/* Find the next format in the string pdl, if there is none left,
	   go to the terminating zero */
	while (!isspace(*format) && *format != ',' && *format != '\0')
	  format ++;
	while ((isspace(*format) || *format == ',') && *format != '\0')
	  format ++;
      }
    }
  }

  /* Check for each CUPS/cups-filters-supported PDL, starting with the
     most desirable going to the least desirable. If a PDL requires a
     certain set of resolutions (the raster-based PDLs), find the
     resolutions and find out which are the common resolutions of all
     supported PDLs. Choose the default resolution from the most
     desirable of all resolution-requiring PDLs if it is common in all
     of them. Skip a resolution-requiring PDL if its resolution list
     attribute is missing or contains only broken entries. Use the
     general resolution list and default resolution of the printer
     only if it does not support any resolution-requiring PDL. Use 300
     dpi if there is no resolution info at all in the attributes.
     In case of PDF as PDL check whether also the
     "application/vnd.cups-pdf" MIME type is accepted. In this case
     our printer is a remote CUPS queue which already runs the
     pdftopdf filter on the server, so let the PPD take
     "application/pdf" as input format so that pdftopdf does not also
     get executed on the client, applying option settings twice. See
     https://github.com/apple/cups/issues/5361 */
  if (cupsArrayFind(pdl_list, "application/vnd.cups-pdf")) {
    cupsFilePuts(fp, "*cupsFilter2: \"application/pdf application/pdf 0 -\"\n");
    manual_copies = 0;
    formatfound = 1;
    is_pdf = 1;
  } else if (cupsArrayFind(pdl_list, "application/pdf")) {
    cupsFilePuts(fp, "*cupsFilter2: \"application/vnd.cups-pdf application/pdf 0 -\"\n");
    manual_copies = 0;
    formatfound = 1;
    is_pdf = 1;
  }
  if (cupsArrayFind(pdl_list, "image/pwg-raster")) {
    if ((attr = ippFindAttribute(response,
				 "pwg-raster-document-resolution-supported",
				 IPP_TAG_RESOLUTION)) != NULL) {
      current_def = NULL;
      if ((current_res = ippResolutionListToArray(attr)) != NULL &&
	  joinResolutionArrays(&common_res, &current_res, &common_def,
			       &current_def)) {
	cupsFilePuts(fp, "*cupsFilter2: \"image/pwg-raster image/pwg-raster 0 -\"\n");
	if (formatfound == 0) manual_copies = 1;
	formatfound = 1;
	is_pwg = 1;
      }
    }
  }
#ifdef CUPS_RASTER_HAVE_APPLERASTER
  if (cupsArrayFind(pdl_list, "image/urf")) {
    if ((attr = ippFindAttribute(response, "urf-supported",
				 IPP_TAG_KEYWORD)) != NULL) {
      int lowdpi = 0, hidpi = 0; /* Lower and higher resolution */
      for (i = 0, count = ippGetCount(attr); i < count; i ++) {
	const char *rs = ippGetString(attr, i, NULL); /* RS value */
	if (_cups_strncasecmp(rs, "RS", 2))
	  continue;
	lowdpi = atoi(rs + 2);
	if ((rs = strrchr(rs, '-')) != NULL)
	  hidpi = atoi(rs + 1);
	else
	  hidpi = lowdpi;
	break;
      }
      if (lowdpi == 0) {
	/* Invalid "urf-supported" value... */
	goto bad_ppd;
      } else {
	if ((current_res = resolutionArrayNew()) != NULL) {
	  if ((current_def = resolutionNew(lowdpi, lowdpi)) != NULL)
	    cupsArrayAdd(current_res, current_def);
	  if (hidpi != lowdpi &&
	      (current_def = resolutionNew(hidpi, hidpi)) != NULL)
	    cupsArrayAdd(current_res, current_def);
	  current_def = NULL;
	  if (cupsArrayCount(current_res) > 0 &&
	      joinResolutionArrays(&common_res, &current_res, &common_def,
				   &current_def)) {
	    cupsFilePuts(fp, "*cupsFilter2: \"image/urf image/urf 100 -\"\n");
	    if (formatfound == 0) manual_copies = 1;
	    formatfound = 1;
	    is_apple = 1;
	  }
	}
      }
    }
  }
#endif
#ifdef QPDF_HAVE_PCLM
  if (cupsArrayFind(pdl_list, "application/PCLm")) {
    if ((attr = ippFindAttribute(response, "pclm-source-resolution-supported",
				 IPP_TAG_RESOLUTION)) != NULL) {
      if ((defattr = ippFindAttribute(response,
				      "pclm-source-resolution-default",
				      IPP_TAG_RESOLUTION)) != NULL)
	current_def = ippResolutionToRes(defattr, 0);
      else
	current_def = NULL;
      if ((current_res = ippResolutionListToArray(attr)) != NULL &&
	  joinResolutionArrays(&common_res, &current_res, &common_def,
			       &current_def)) {
	cupsFilePuts(fp, "*cupsFilter2: \"application/PCLm application/PCLm 200 -\"\n");
	if (formatfound == 0) manual_copies = 1;
	formatfound = 1;
	is_pclm = 1;
      }
    }
  }
#endif
  if (cupsArrayFind(pdl_list, "application/vnd.hp-pclxl")) {
    /* Check whether the gstopxl filter is installed,
       otherwise ignore the PCL-XL support of the printer */
    if ((cups_serverbin = getenv("CUPS_SERVERBIN")) == NULL)
      cups_serverbin = CUPS_SERVERBIN;
    snprintf(filter_path, sizeof(filter_path), "%s/filter/gstopxl",
	     cups_serverbin);
    if (access(filter_path, X_OK) == 0) {
      /* We put a high cost factor here as if a printer supports also
	 another format, like PWG or Apple Raster, we prefer it, as some
	 PCL-XL printers have bugs in their PCL-XL interpreters */
      cupsFilePrintf(fp, "*cupsFilter2: \"application/vnd.cups-pdf application/vnd.hp-pclxl 300 gstopxl\"\n");
      if (formatfound == 0) manual_copies = 1;
      formatfound = 1;
    }
  }
  if (cupsArrayFind(pdl_list, "application/postscript")) {
    /* We put a high cost factor here as if a printer supports also
       another format, like PWG or Apple Raster, we prefer it, as many
       PostScript printers have bugs in their PostScript interpreters */
    cupsFilePuts(fp, "*cupsFilter2: \"application/vnd.cups-postscript application/postscript 500 -\"\n");
    if (formatfound == 0) manual_copies = 0;
    formatfound = 1;
  }
  if (cupsArrayFind(pdl_list, "application/vnd.hp-pcl")) {
    /* We put a high cost factor here as if a printer supports also
       another format, like PWG or Apple Raster, we prefer it, as there
       are some printers, like HP inkjets which report to accept PCL
       but do not support PCL 5c/e or PCL-XL */
    cupsFilePrintf(fp, "*cupsFilter2: \"application/vnd.cups-raster application/vnd.hp-pcl 700 rastertopclx\"\n");
    if (formatfound == 0) manual_copies = 1;
    formatfound = 1;
  }
  if (cupsArrayFind(pdl_list, "image/jpeg"))
    cupsFilePuts(fp, "*cupsFilter2: \"image/jpeg image/jpeg 0 -\"\n");
  if (cupsArrayFind(pdl_list, "image/png"))
    cupsFilePuts(fp, "*cupsFilter2: \"image/png image/png 0 -\"\n");
  cupsArrayDelete(pdl_list);
  if (manual_copies < 0) manual_copies = 1;
  if (formatfound == 0)
    goto bad_ppd;

  /* For the case that we will print in a raster format and not in a high-level
     format, we need to create multiple copies on the client. We add a line to
     the PPD which tells the pdftopdf filter to generate the copies */
  if (manual_copies == 1)
    cupsFilePuts(fp, "*cupsManualCopies: true\n");

  /* No resolution requirements by any of the supported PDLs? 
     Use "printer-resolution-supported" attribute */
  if (common_res == NULL) {
    if ((attr = ippFindAttribute(response, "printer-resolution-supported",
				 IPP_TAG_RESOLUTION)) != NULL) {
      if ((defattr = ippFindAttribute(response, "printer-resolution-default",
				      IPP_TAG_RESOLUTION)) != NULL)
	current_def = ippResolutionToRes(defattr, 0);
      else
	current_def = NULL;
      if ((current_res = ippResolutionListToArray(attr)) != NULL)
	joinResolutionArrays(&common_res, &current_res, &common_def,
			     &current_def);
    }
  }
  /* Still no resolution found? Default to 300 dpi */
  if (common_res == NULL) {
    if ((common_res = resolutionArrayNew()) != NULL) {
      if ((current_def = resolutionNew(300, 300)) != NULL)
	cupsArrayAdd(common_res, current_def);
      current_def = NULL;
    } else
      goto bad_ppd;
  }
  /* No default resolution determined yet */
  if (common_def == NULL) {
    if ((defattr = ippFindAttribute(response, "printer-resolution-default",
				    IPP_TAG_RESOLUTION)) != NULL) {
      common_def = ippResolutionToRes(defattr, 0);
      if (!cupsArrayFind(common_res, common_def)) {
	free(common_def);
	common_def = NULL;
      }
    }
    if (common_def == NULL) {
      count = cupsArrayCount(common_res);
      common_def = copy_resolution(cupsArrayIndex(common_res, count / 2), NULL);
    }
  }
  /* Get minimum and maximum resolution */
  min_res = copy_resolution(cupsArrayFirst(common_res), NULL);
  max_res = copy_resolution(cupsArrayLast(common_res), NULL);
  cupsArrayDelete(common_res);

#ifdef QPDF_HAVE_PCLM
 /*
  * Generically check for PCLm attributes in IPP response
  * and ppdize them one by one
  */

  if (is_pclm) {
    attr = ippFirstAttribute(response); /* first attribute */
    while (attr) {                      /* loop through all the attributes */
      if (_cups_strncasecmp(ippGetName(attr), "pclm", 4) == 0) {
	pwg_ppdize_name(ippGetName(attr), ppdname, sizeof(ppdname));
	cupsFilePrintf(fp, "*cups%s: ", ppdname);
	ipp_tag_t tag = ippGetValueTag(attr);
	count = ippGetCount(attr);

	if (tag == IPP_TAG_RESOLUTION) { /* ppdize values of type resolution */
	  if ((current_res = ippResolutionListToArray(attr)) != NULL) {
	    count = cupsArrayCount(current_res);
	    if (count > 1)
	      cupsFilePuts(fp, "\"");
	    for (i = 0, current_def = cupsArrayFirst(current_res);
		 current_def;
		 i ++, current_def = cupsArrayNext(current_res)) {
	      int x = current_def->x;
	      int y = current_def->y;
	      if (x == y)
		cupsFilePrintf(fp, "%ddpi", x);
	      else
		cupsFilePrintf(fp, "%dx%ddpi", x, y);
	      if (i < count - 1)
		cupsFilePuts(fp, ",");
	    }
	    if (count > 1)
	      cupsFilePuts(fp, "\"");
	    cupsFilePuts(fp, "\n");
	  } else
	    cupsFilePuts(fp, "\"\"\n");
	  cupsArrayDelete(current_res);
	} else {
	  ippAttributeString(attr, ppdname, sizeof(ppdname));
	  if (count > 1 || /* quotes around multi-valued and string
			      attributes */
	      tag == IPP_TAG_STRING ||
	      tag == IPP_TAG_TEXT ||
	      tag == IPP_TAG_TEXTLANG)
	    cupsFilePrintf(fp, "\"%s\"\n", ppdname);
	  else
	    cupsFilePrintf(fp, "%s\n", ppdname);
	}
      }
      attr = ippNextAttribute(response);
    }
  }
#endif

 /*
  * PageSize/PageRegion/ImageableArea/PaperDimension
  */
  printer_sizes = generate_sizes(response, &defattr, &min_length, &min_width,
				 &max_length, &max_width,
				 &bottom, &left, &right, &top, ppdname);
  if (sizes==NULL) {
    sizes = printer_sizes;
  } else
    strcpy(ppdname, default_pagesize);

  if (cupsArrayCount(sizes) > 0) {
   /*
    * List all of the standard sizes...
    */

    char	tleft[256],		/* Left string */
		tbottom[256],		/* Bottom string */
		tright[256],		/* Right string */
		ttop[256],		/* Top string */
		twidth[256],		/* Width string */
		tlength[256],		/* Length string */
		ppdsizename[128];
    char        *ippsizename;
    cupsFilePrintf(fp, "*OpenUI *PageSize/%s: PickOne\n"
		       "*OrderDependency: 10 AnySetup *PageSize\n"
		       "*DefaultPageSize: %s\n", "Media Size", ppdname);
    for (size = (cups_size_t *)cupsArrayFirst(sizes); size;
	 size = (cups_size_t *)cupsArrayNext(sizes)) {
      _cupsStrFormatd(twidth, twidth + sizeof(twidth),
		      size->width * 72.0 / 2540.0, loc);
      _cupsStrFormatd(tlength, tlength + sizeof(tlength),
		      size->length * 72.0 / 2540.0, loc);
      strlcpy(ppdsizename, size->media, sizeof(ppdsizename));
      if ((ippsizename = strchr(ppdsizename, ' ')) != NULL) {
	*ippsizename = '\0';
	ippsizename ++;
      }

      if (ippsizename)
	human_readable = lookup_choice(ippsizename, "media",
				       opt_strings_catalog,
				       printer_opt_strings_catalog);
      else
	human_readable = NULL;
      if (!human_readable) {
	pwg = pwgMediaForSize(size->width, size->length);
	if (pwg)
	  human_readable = lookup_choice((char *)pwg->pwg, "media",
					 opt_strings_catalog,
					 printer_opt_strings_catalog);
      }
      cupsFilePrintf(fp, "*PageSize %s%s%s%s: \"<</PageSize[%s %s]>>setpagedevice\"\n",
		     ppdsizename,
		     (human_readable ? "/" : ""),
		     (human_readable ? human_readable : ""),
		     (human_readable && strstr(ppdsizename, ".Borderless") ?
		      " (Borderless)" : ""),
		     twidth, tlength);
    }
    cupsFilePuts(fp, "*CloseUI: *PageSize\n");

    cupsFilePrintf(fp, "*OpenUI *PageRegion/%s: PickOne\n"
                       "*OrderDependency: 10 AnySetup *PageRegion\n"
                       "*DefaultPageRegion: %s\n", "Media Size", ppdname);
    for (size = (cups_size_t *)cupsArrayFirst(sizes); size;
	 size = (cups_size_t *)cupsArrayNext(sizes)) {
      _cupsStrFormatd(twidth, twidth + sizeof(twidth),
		      size->width * 72.0 / 2540.0, loc);
      _cupsStrFormatd(tlength, tlength + sizeof(tlength),
		      size->length * 72.0 / 2540.0, loc);
      strlcpy(ppdsizename, size->media, sizeof(ppdsizename));
      if ((ippsizename = strchr(ppdsizename, ' ')) != NULL) {
	*ippsizename = '\0';
	ippsizename ++;
      }

      if (ippsizename)
	human_readable = lookup_choice(ippsizename, "media",
				       opt_strings_catalog,
				       printer_opt_strings_catalog);
      else
	human_readable = NULL;
      if (!human_readable) {
	pwg = pwgMediaForSize(size->width, size->length);
	if (pwg)
	  human_readable = lookup_choice((char *)pwg->pwg, "media",
					 opt_strings_catalog,
					 printer_opt_strings_catalog);
      }
      cupsFilePrintf(fp, "*PageRegion %s%s%s%s: \"<</PageSize[%s %s]>>setpagedevice\"\n",
		     ppdsizename,
		     (human_readable ? "/" : ""),
		     (human_readable ? human_readable : ""),
		     (human_readable && strstr(ppdsizename, ".Borderless") ?
		      " (Borderless)" : ""),
		     twidth, tlength);
    }
    cupsFilePuts(fp, "*CloseUI: *PageRegion\n");

    cupsFilePrintf(fp, "*DefaultImageableArea: %s\n"
		   "*DefaultPaperDimension: %s\n", ppdname, ppdname);

    for (size = (cups_size_t *)cupsArrayFirst(sizes); size;
	 size = (cups_size_t *)cupsArrayNext(sizes)) {
      _cupsStrFormatd(tleft, tleft + sizeof(tleft),
		      size->left * 72.0 / 2540.0, loc);
      _cupsStrFormatd(tbottom, tbottom + sizeof(tbottom),
		      size->bottom * 72.0 / 2540.0, loc);
      _cupsStrFormatd(tright, tright + sizeof(tright),
		      (size->width - size->right) * 72.0 / 2540.0, loc);
      _cupsStrFormatd(ttop, ttop + sizeof(ttop),
		      (size->length - size->top) * 72.0 / 2540.0, loc);
      _cupsStrFormatd(twidth, twidth + sizeof(twidth),
		      size->width * 72.0 / 2540.0, loc);
      _cupsStrFormatd(tlength, tlength + sizeof(tlength),
		      size->length * 72.0 / 2540.0, loc);
      strlcpy(ppdsizename, size->media, sizeof(ppdsizename));
      if ((ippsizename = strchr(ppdsizename, ' ')) != NULL)
	*ippsizename = '\0';

      cupsFilePrintf(fp, "*ImageableArea %s: \"%s %s %s %s\"\n", ppdsizename,
		     tleft, tbottom, tright, ttop);
      cupsFilePrintf(fp, "*PaperDimension %s: \"%s %s\"\n", ppdsizename,
		     twidth, tlength);
    }

    cupsArrayDelete(sizes);

   /*
    * Custom size support...
    */

    if (max_width > 0 && min_width < INT_MAX && max_length > 0 &&
	min_length < INT_MAX) {
      char	tmax[256], tmin[256];	/* Min/max values */

      _cupsStrFormatd(tleft, tleft + sizeof(tleft), left * 72.0 / 2540.0, loc);
      _cupsStrFormatd(tbottom, tbottom + sizeof(tbottom),
		      bottom * 72.0 / 2540.0, loc);
      _cupsStrFormatd(tright, tright + sizeof(tright), right * 72.0 / 2540.0,
		      loc);
      _cupsStrFormatd(ttop, ttop + sizeof(ttop), top * 72.0 / 2540.0, loc);

      cupsFilePrintf(fp, "*HWMargins: \"%s %s %s %s\"\n", tleft, tbottom,
		     tright, ttop);

      _cupsStrFormatd(tmax, tmax + sizeof(tmax), max_width * 72.0 / 2540.0,
		      loc);
      _cupsStrFormatd(tmin, tmin + sizeof(tmin), min_width * 72.0 / 2540.0,
		      loc);
      cupsFilePrintf(fp, "*ParamCustomPageSize Width: 1 points %s %s\n", tmin,
		     tmax);

      _cupsStrFormatd(tmax, tmax + sizeof(tmax), max_length * 72.0 / 2540.0,
		      loc);
      _cupsStrFormatd(tmin, tmin + sizeof(tmin), min_length * 72.0 / 2540.0,
		      loc);
      cupsFilePrintf(fp, "*ParamCustomPageSize Height: 2 points %s %s\n", tmin,
		     tmax);

      cupsFilePuts(fp, "*ParamCustomPageSize WidthOffset: 3 points 0 0\n");
      cupsFilePuts(fp, "*ParamCustomPageSize HeightOffset: 4 points 0 0\n");
      cupsFilePuts(fp, "*ParamCustomPageSize Orientation: 5 int 0 3\n");
      cupsFilePuts(fp, "*CustomPageSize True: \"pop pop pop <</PageSize[5 -2 roll]/ImagingBBox null>>setpagedevice\"\n");
    }
  } else {
    cupsArrayDelete(sizes);
    cupsFilePrintf(fp,
		   "*%% Printer did not supply page size info via IPP, using defaults\n"
		   "*OpenUI *PageSize/Media Size: PickOne\n"
		   "*OrderDependency: 10 AnySetup *PageSize\n"
		   "*DefaultPageSize: Letter\n"
		   "*PageSize Letter/US Letter: \"<</PageSize[612 792]>>setpagedevice\"\n"
		   "*PageSize Legal/US Legal: \"<</PageSize[612 1008]>>setpagedevice\"\n"
		   "*PageSize Executive/Executive: \"<</PageSize[522 756]>>setpagedevice\"\n"
		   "*PageSize Tabloid/Tabloid: \"<</PageSize[792 1224]>>setpagedevice\"\n"
		   "*PageSize A3/A3: \"<</PageSize[842 1191]>>setpagedevice\"\n"
		   "*PageSize A4/A4: \"<</PageSize[595 842]>>setpagedevice\"\n"
		   "*PageSize A5/A5: \"<</PageSize[420 595]>>setpagedevice\"\n"
		   "*PageSize B5/JIS B5: \"<</PageSize[516 729]>>setpagedevice\"\n"
		   "*PageSize EnvISOB5/Envelope B5: \"<</PageSize[499 709]>>setpagedevice\"\n"
		   "*PageSize Env10/Envelope #10 : \"<</PageSize[297 684]>>setpagedevice\"\n"
		   "*PageSize EnvC5/Envelope C5: \"<</PageSize[459 649]>>setpagedevice\"\n"
		   "*PageSize EnvDL/Envelope DL: \"<</PageSize[312 624]>>setpagedevice\"\n"
		   "*PageSize EnvMonarch/Envelope Monarch: \"<</PageSize[279 540]>>setpagedevice\"\n"
		   "*CloseUI: *PageSize\n"
		   "*OpenUI *PageRegion/Media Size: PickOne\n"
		   "*OrderDependency: 10 AnySetup *PageRegion\n"
		   "*DefaultPageRegion: Letter\n"
		   "*PageRegion Letter/US Letter: \"<</PageSize[612 792]>>setpagedevice\"\n"
		   "*PageRegion Legal/US Legal: \"<</PageSize[612 1008]>>setpagedevice\"\n"
		   "*PageRegion Executive/Executive: \"<</PageSize[522 756]>>setpagedevice\"\n"
		   "*PageRegion Tabloid/Tabloid: \"<</PageSize[792 1224]>>setpagedevice\"\n"
		   "*PageRegion A3/A3: \"<</PageSize[842 1191]>>setpagedevice\"\n"
		   "*PageRegion A4/A4: \"<</PageSize[595 842]>>setpagedevice\"\n"
		   "*PageRegion A5/A5: \"<</PageSize[420 595]>>setpagedevice\"\n"
		   "*PageRegion B5/JIS B5: \"<</PageSize[516 729]>>setpagedevice\"\n"
		   "*PageRegion EnvISOB5/Envelope B5: \"<</PageSize[499 709]>>setpagedevice\"\n"
		   "*PageRegion Env10/Envelope #10 : \"<</PageSize[297 684]>>setpagedevice\"\n"
		   "*PageRegion EnvC5/Envelope C5: \"<</PageSize[459 649]>>setpagedevice\"\n"
		   "*PageRegion EnvDL/Envelope DL: \"<</PageSize[312 624]>>setpagedevice\"\n"
		   "*PageRegion EnvMonarch/Envelope Monarch: \"<</PageSize[279 540]>>setpagedevice\"\n"
		   "*CloseUI: *PageSize\n"
		   "*DefaultImageableArea: Letter\n"
		   "*ImageableArea Letter/US Letter: \"18 12 594 780\"\n"
		   "*ImageableArea Legal/US Legal: \"18 12 594 996\"\n"
		   "*ImageableArea Executive/Executive: \"18 12 504 744\"\n"
		   "*ImageableArea Tabloid/Tabloid: \"18 12 774 1212\"\n"
		   "*ImageableArea A3/A3: \"18 12 824 1179\"\n"
		   "*ImageableArea A4/A4: \"18 12 577 830\"\n"
		   "*ImageableArea A5/A5: \"18 12 402 583\"\n"
		   "*ImageableArea B5/JIS B5: \"18 12 498 717\"\n"
		   "*ImageableArea EnvISOB5/Envelope B5: \"18 12 481 697\"\n"
		   "*ImageableArea Env10/Envelope #10 : \"18 12 279 672\"\n"
		   "*ImageableArea EnvC5/Envelope C5: \"18 12 441 637\"\n"
		   "*ImageableArea EnvDL/Envelope DL: \"18 12 294 612\"\n"
		   "*ImageableArea EnvMonarch/Envelope Monarch: \"18 12 261 528\"\n"
		   "*DefaultPaperDimension: Letter\n"
		   "*PaperDimension Letter/US Letter: \"612 792\"\n"
		   "*PaperDimension Legal/US Legal: \"612 1008\"\n"
		   "*PaperDimension Executive/Executive: \"522 756\"\n"
		   "*PaperDimension Tabloid/Tabloid: \"792 1224\"\n"
		   "*PaperDimension A3/A3: \"842 1191\"\n"
		   "*PaperDimension A4/A4: \"595 842\"\n"
		   "*PaperDimension A5/A5: \"420 595\"\n"
		   "*PaperDimension B5/JIS B5: \"516 729\"\n"
		   "*PaperDimension EnvISOB5/Envelope B5: \"499 709\"\n"
		   "*PaperDimension Env10/Envelope #10 : \"297 684\"\n"
		   "*PaperDimension EnvC5/Envelope C5: \"459 649\"\n"
		   "*PaperDimension EnvDL/Envelope DL: \"312 624\"\n"
		   "*PaperDimension EnvMonarch/Envelope Monarch: \"279 540\"\n");
  }

 /*
  * InputSlot...
  */

  if ((attr = ippFindAttribute(ippGetCollection(defattr, 0), "media-source",
			       IPP_TAG_KEYWORD)) != NULL)
    pwg_ppdize_name(ippGetString(attr, 0, NULL), ppdname, sizeof(ppdname));
  else
    strlcpy(ppdname, "Unknown", sizeof(ppdname));

  if ((attr = ippFindAttribute(response, "media-source-supported",
			       IPP_TAG_KEYWORD)) != NULL &&
      (count = ippGetCount(attr)) > 1) {
    static const char * const sources[][2] =
    {					/* "media-source" strings */
      { "Auto", _("Automatic") },
      { "Main", _("Main") },
      { "Alternate", _("Alternate") },
      { "LargeCapacity", _("Large Capacity") },
      { "Manual", _("Manual") },
      { "Envelope", _("Envelope") },
      { "Disc", _("Disc") },
      { "Photo", _("Photo") },
      { "Hagaki", _("Hagaki") },
      { "MainRoll", _("Main Roll") },
      { "AlternateRoll", _("Alternate Roll") },
      { "Top", _("Top") },
      { "Middle", _("Middle") },
      { "Bottom", _("Bottom") },
      { "Side", _("Side") },
      { "Left", _("Left") },
      { "Right", _("Right") },
      { "Center", _("Center") },
      { "Rear", _("Rear") },
      { "ByPassTray", _("Multipurpose") },
      { "Tray1", _("Tray 1") },
      { "Tray2", _("Tray 2") },
      { "Tray3", _("Tray 3") },
      { "Tray4", _("Tray 4") },
      { "Tray5", _("Tray 5") },
      { "Tray6", _("Tray 6") },
      { "Tray7", _("Tray 7") },
      { "Tray8", _("Tray 8") },
      { "Tray9", _("Tray 9") },
      { "Tray10", _("Tray 10") },
      { "Tray11", _("Tray 11") },
      { "Tray12", _("Tray 12") },
      { "Tray13", _("Tray 13") },
      { "Tray14", _("Tray 14") },
      { "Tray15", _("Tray 15") },
      { "Tray16", _("Tray 16") },
      { "Tray17", _("Tray 17") },
      { "Tray18", _("Tray 18") },
      { "Tray19", _("Tray 19") },
      { "Tray20", _("Tray 20") },
      { "Roll1", _("Roll 1") },
      { "Roll2", _("Roll 2") },
      { "Roll3", _("Roll 3") },
      { "Roll4", _("Roll 4") },
      { "Roll5", _("Roll 5") },
      { "Roll6", _("Roll 6") },
      { "Roll7", _("Roll 7") },
      { "Roll8", _("Roll 8") },
      { "Roll9", _("Roll 9") },
      { "Roll10", _("Roll 10") }
    };

    human_readable = lookup_option("media-source", opt_strings_catalog,
				   printer_opt_strings_catalog);
    cupsFilePrintf(fp, "*OpenUI *InputSlot/%s: PickOne\n"
		   "*OrderDependency: 10 AnySetup *InputSlot\n"
		   "*DefaultInputSlot: %s\n",
		   (human_readable ? human_readable : "Media Source"),
		   ppdname);
    for (i = 0, count = ippGetCount(attr); i < count; i ++) {
      keyword = ippGetString(attr, i, NULL);

      pwg_ppdize_name(keyword, ppdname, sizeof(ppdname));

      human_readable = lookup_choice((char *)keyword, "media-source",
				     opt_strings_catalog,
				     printer_opt_strings_catalog);
      for (j = (int)(sizeof(sources) / sizeof(sources[0])) - 1; j >= 0; j --)
        if (!strcmp(sources[j][0], ppdname)) {
	  if (human_readable == NULL)
	    human_readable = (char *)_cupsLangString(lang, sources[j][1]);
	  break;
	}
      if (j >= 0)
	cupsFilePrintf(fp, "*InputSlot %s/%s: \"<</MediaPosition %d>>setpagedevice\"\n",
		       ppdname, human_readable, j);
      else
	cupsFilePrintf(fp, "*InputSlot %s%s%s: \"\"\n",
		       ppdname,
		       (human_readable ? "/" : ""),
		       (human_readable ? human_readable : ""));
    }
    cupsFilePuts(fp, "*CloseUI: *InputSlot\n");
  }

 /*
  * MediaType...
  */

  if ((attr = ippFindAttribute(ippGetCollection(defattr, 0), "media-type",
			       IPP_TAG_KEYWORD)) != NULL)
    pwg_ppdize_name(ippGetString(attr, 0, NULL), ppdname, sizeof(ppdname));
  else
    strlcpy(ppdname, "Unknown", sizeof(ppdname));

  if ((attr = ippFindAttribute(response, "media-type-supported",
			       IPP_TAG_KEYWORD)) != NULL &&
      (count = ippGetCount(attr)) > 1) {
    static const char * const media_types[][2] =
    {					/* "media-type" strings */
      { "aluminum", _("Aluminum") },
      { "auto", _("Automatic") },
      { "back-print-film", _("Back Print Film") },
      { "cardboard", _("Cardboard") },
      { "cardstock", _("Cardstock") },
      { "cd", _("CD") },
      { "com.hp.advanced-photo", _("Advanced Photo Paper") }, /* HP */
      { "com.hp.brochure-glossy", _("Glossy Brochure Paper") }, /* HP */
      { "com.hp.brochure-matte", _("Matte Brochure Paper") }, /* HP */
      { "com.hp.cover-matte", _("Matte Cover Paper") }, /* HP */
      { "com.hp.ecosmart-lite", _("Office Recycled Paper") }, /* HP */
      { "com.hp.everyday-glossy", _("Everyday Glossy Photo Paper") }, /* HP */
      { "com.hp.everyday-matte", _("Everyday Matte Paper") }, /* HP */
      { "com.hp.extra-heavy", _("Extra Heavyweight Paper") }, /* HP */
      { "com.hp.intermediate", _("Multipurpose Paper") }, /* HP */
      { "com.hp.mid-weight", _("Mid-Weight Paper") }, /* HP */
      { "com.hp.premium-inkjet", _("Premium Inkjet Paper") }, /* HP */
      { "com.hp.premium-photo", _("Premium Photo Glossy Paper") }, /* HP */
      { "com.hp.premium-presentation-matte", _("Premium Presentation Matte Paper") }, /* HP */
      { "continuous", _("Continuous") },
      { "continuous-long", _("Continuous Long") },
      { "continuous-short", _("Continuous Short") },
      { "disc", _("Optical Disc") },
      { "disc-glossy", _("Glossy Optical Disc") },
      { "disc-high-gloss", _("High Gloss Optical Disc") },
      { "disc-matte", _("Matte Optical Disc") },
      { "disc-satin", _("Satin Optical Disc") },
      { "disc-semi-gloss", _("Semi-Gloss Optical Disc") },
      { "double-wall", _("Double Wall Cardboard") },
      { "dry-film", _("Dry Film") },
      { "dvd", _("DVD") },
      { "embossing-foil", _("Embossing Foil") },
      { "end-board", _("End Board") },
      { "envelope", _("Envelope") },
      { "envelope-archival", _("Archival Envelope") },
      { "envelope-bond", _("Bond Envelope") },
      { "envelope-coated", _("Coated Envelope") },
      { "envelope-cotton", _("Cotton Envelope") },
      { "envelope-fine", _("Fine Envelope") },
      { "envelope-heavyweight", _("Heavyweight Envelope") },
      { "envelope-inkjet", _("Inkjet Envelope") },
      { "envelope-lightweight", _("Lightweight Envelope") },
      { "envelope-plain", _("Plain Envelope") },
      { "envelope-preprinted", _("Preprinted Envelope") },
      { "envelope-window", _("Windowed Envelope") },
      { "fabric", _("Fabric") },
      { "fabric-archival", _("Archival Fabric") },
      { "fabric-glossy", _("Glossy Fabric") },
      { "fabric-high-gloss", _("High Gloss Fabric") },
      { "fabric-matte", _("Matte Fabric") },
      { "fabric-semi-gloss", _("Semi-Gloss Fabric") },
      { "fabric-waterproof", _("Waterproof Fabric") },
      { "film", _("Film") },
      { "flexo-base", _("Flexo Base") },
      { "flexo-photo-polymer", _("Flexo Photo Polymer") },
      { "flute", _("Flute") },
      { "foil", _("Foil") },
      { "full-cut-tabs", _("Full Cut Tabs") },
      { "glass", _("Glass") },
      { "glass-colored", _("Glass Colored") },
      { "glass-opaque", _("Glass Opaque") },
      { "glass-surfaced", _("Glass Surfaced") },
      { "glass-textured", _("Glass Textured") },
      { "gravure-cylinder", _("Gravure Cylinder") },
      { "image-setter-paper", _("Image Setter Paper") },
      { "imaging-cylinder", _("Imaging Cylinder") },
      { "jp.co.canon_photo-paper-plus-glossy-ii", _("Photo Paper Plus Glossy II") }, /* Canon */
      { "jp.co.canon_photo-paper-pro-platinum", _("Photo Paper Pro Platinum") }, /* Canon */
      { "jp.co.canon-photo-paper-plus-glossy-ii", _("Photo Paper Plus Glossy II") }, /* Canon */
      { "jp.co.canon-photo-paper-pro-platinum", _("Photo Paper Pro Platinum") }, /* Canon */
      { "labels", _("Labels") },
      { "labels-colored", _("Colored Labels") },
      { "labels-glossy", _("Glossy Labels") },
      { "labels-high-gloss", _("High Gloss Labels") },
      { "labels-inkjet", _("Inkjet Labels") },
      { "labels-matte", _("Matte Labels") },
      { "labels-permanent", _("Permanent Labels") },
      { "labels-satin", _("Satin Labels") },
      { "labels-security", _("Security Labels") },
      { "labels-semi-gloss", _("Semi-Gloss Labels") },
      { "laminating-foil", _("Laminating Foil") },
      { "letterhead", _("Letterhead") },
      { "metal", _("Metal") },
      { "metal-glossy", _("Metal Glossy") },
      { "metal-high-gloss", _("Metal High Gloss") },
      { "metal-matte", _("Metal Matte") },
      { "metal-satin", _("Metal Satin") },
      { "metal-semi-gloss", _("Metal Semi Gloss") },
      { "mounting-tape", _("Mounting Tape") },
      { "multi-layer", _("Multi Layer") },
      { "multi-part-form", _("Multi Part Form") },
      { "other", _("Other") },
      { "paper", _("Paper") },
      { "photo", _("Photo Paper") }, /* HP mis-spelling */
      { "photographic", _("Photo Paper") },
      { "photographic-archival", _("Archival Photo Paper") },
      { "photographic-film", _("Photo Film") },
      { "photographic-glossy", _("Glossy Photo Paper") },
      { "photographic-high-gloss", _("High Gloss Photo Paper") },
      { "photographic-matte", _("Matte Photo Paper") },
      { "photographic-satin", _("Satin Photo Paper") },
      { "photographic-semi-gloss", _("Semi-Gloss Photo Paper") },
      { "plastic", _("Plastic") },
      { "plastic-archival", _("Plastic Archival") },
      { "plastic-colored", _("Plastic Colored") },
      { "plastic-glossy", _("Plastic Glossy") },
      { "plastic-high-gloss", _("Plastic High Gloss") },
      { "plastic-matte", _("Plastic Matte") },
      { "plastic-satin", _("Plastic Satin") },
      { "plastic-semi-gloss", _("Plastic Semi Gloss") },
      { "plate", _("Plate") },
      { "polyester", _("Polyester") },
      { "pre-cut-tabs", _("Pre Cut Tabs") },
      { "roll", _("Roll") },
      { "screen", _("Screen") },
      { "screen-paged", _("Screen Paged") },
      { "self-adhesive", _("Self Adhesive") },
      { "self-adhesive-film", _("Self Adhesive Film") },
      { "shrink-foil", _("Shrink Foil") },
      { "single-face", _("Single Face") },
      { "single-wall", _("Single Wall Cardboard") },
      { "sleeve", _("Sleeve") },
      { "stationery", _("Plain Paper") },
      { "stationery-archival", _("Archival Paper") },
      { "stationery-coated", _("Coated Paper") },
      { "stationery-cotton", _("Cotton Paper") },
      { "stationery-fine", _("Vellum Paper") },
      { "stationery-heavyweight", _("Heavyweight Paper") },
      { "stationery-heavyweight-coated", _("Heavyweight Coated Paper") },
      { "stationery-inkjet", _("Inkjet Paper") },
      { "stationery-letterhead", _("Letterhead") },
      { "stationery-lightweight", _("Lightweight Paper") },
      { "stationery-preprinted", _("Preprinted Paper") },
      { "stationery-prepunched", _("Punched Paper") },
      { "tab-stock", _("Tab Stock") },
      { "tractor", _("Tractor") },
      { "transfer", _("Transfer") },
      { "transparency", _("Transparency") },
      { "triple-wall", _("Triple Wall Cardboard") },
      { "wet-film", _("Wet Film") }
    };

    human_readable = lookup_option("media-type", opt_strings_catalog,
				   printer_opt_strings_catalog);
    cupsFilePrintf(fp, "*OpenUI *MediaType/%s: PickOne\n"
		   "*OrderDependency: 10 AnySetup *MediaType\n"
		   "*DefaultMediaType: %s\n",
		   (human_readable ? human_readable : "Media Type"),
		   ppdname);
    for (i = 0; i < count; i ++) {
      keyword = ippGetString(attr, i, NULL);

      pwg_ppdize_name(keyword, ppdname, sizeof(ppdname));

      human_readable = lookup_choice((char *)keyword, "media-type",
				     opt_strings_catalog,
				     printer_opt_strings_catalog);
      if (human_readable == NULL)
	for (j = 0; j < (int)(sizeof(media_types) / sizeof(media_types[0]));
	     j ++)
	  if (!strcmp(media_types[j][0], keyword)) {
	    human_readable = (char *)_cupsLangString(lang, media_types[j][1]);
	    break;
	  }
      cupsFilePrintf(fp, "*MediaType %s%s%s: \"<</MediaType(%s)>>setpagedevice\"\n",
		     ppdname,
		     (human_readable ? "/" : ""),
		     (human_readable ? human_readable : ""),
		     ppdname);
    }
    cupsFilePuts(fp, "*CloseUI: *MediaType\n");
  }

 /*
  * ColorModel...
  */

  if ((attr = ippFindAttribute(response, "urf-supported", IPP_TAG_KEYWORD)) ==
      NULL)
    if ((attr = ippFindAttribute(response, "pwg-raster-document-type-supported",
				 IPP_TAG_KEYWORD)) == NULL)
      if ((attr = ippFindAttribute(response, "print-color-mode-supported",
				   IPP_TAG_KEYWORD)) == NULL)
        attr = ippFindAttribute(response, "output-mode-supported",
				IPP_TAG_KEYWORD);

  human_readable = lookup_option("print-color-mode", opt_strings_catalog,
				 printer_opt_strings_catalog);
  if (attr && ippGetCount(attr) > 0) {
    const char *default_color = NULL;	/* Default */
    int first_choice = 1,
      have_bi_level = 0,
      have_mono = 0;

    for (i = 0, count = ippGetCount(attr); i < count; i ++) {
      keyword = ippGetString(attr, i, NULL); /* Keyword for color/bit depth */

      if (!have_bi_level &&
	  (!strcasecmp(keyword, "black_1") || !strcmp(keyword, "bi-level") ||
	   !strcmp(keyword, "process-bi-level"))) {
	have_bi_level = 1;
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

	human_readable2 = lookup_choice("bi-level", "print-color-mode",
					opt_strings_catalog,
					printer_opt_strings_catalog);
        cupsFilePrintf(fp, "*ColorModel FastGray/%s: \"<</cupsColorSpace 3/cupsBitsPerColor 1/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       (human_readable2 ? human_readable2 :
			_cupsLangString(lang, _("Fast Grayscale"))));

        if (!default_color)
	  default_color = "FastGray";
      } else if (!have_mono &&
		 (!strcasecmp(keyword, "sgray_8") ||
		  !strncmp(keyword, "W8", 2) ||
		  !strcmp(keyword, "monochrome") ||
		  !strcmp(keyword, "process-monochrome"))) {
	have_mono = 1;
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

	human_readable2 = lookup_choice("monochrome", "print-color-mode",
					opt_strings_catalog,
					printer_opt_strings_catalog);
        cupsFilePrintf(fp, "*ColorModel Gray/%s: \"<</cupsColorSpace 18/cupsBitsPerColor 8/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       (human_readable2 ? human_readable2 :
			_cupsLangString(lang, _("Grayscale"))));

        if (!default_color || !strcmp(default_color, "FastGray"))
	  default_color = "Gray";
      } else if (!strcasecmp(keyword, "sgray_16") ||
		 !strncmp(keyword, "W8-16", 5) ||
		 !strncmp(keyword, "W16", 3)) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

        cupsFilePrintf(fp, "*ColorModel Gray16/%s: \"<</cupsColorSpace 18/cupsBitsPerColor 16/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       _cupsLangString(lang, _("Deep Gray (High Definition Grayscale)")));

        if (!default_color || !strcmp(default_color, "FastGray"))
	  default_color = "Gray16";
      } else if (!strcasecmp(keyword, "srgb_8") ||
		 !strncmp(keyword, "SRGB24", 6) ||
		 !strcmp(keyword, "color")) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

	human_readable2 = lookup_choice("color", "print-color-mode",
					opt_strings_catalog,
					printer_opt_strings_catalog);
        cupsFilePrintf(fp, "*ColorModel RGB/%s: \"<</cupsColorSpace 19/cupsBitsPerColor 8/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       (human_readable2 ? human_readable2 :
			_cupsLangString(lang, _("Color"))));

	default_color = "RGB";
      } else if ((!strcasecmp(keyword, "srgb_16") ||
		  !strncmp(keyword, "SRGB48", 6)) &&
		 !ippContainsString(attr, "srgb_8")) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

	human_readable2 = lookup_choice("color", "print-color-mode",
					opt_strings_catalog,
					printer_opt_strings_catalog);
        cupsFilePrintf(fp, "*ColorModel RGB/%s: \"<</cupsColorSpace 19/cupsBitsPerColor 16/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       (human_readable2 ? human_readable2 :
			_cupsLangString(lang, _("Color"))));

	default_color = "RGB";
      } else if (!strcasecmp(keyword, "adobe-rgb_16") ||
		 !strncmp(keyword, "ADOBERGB48", 10) ||
		 !strncmp(keyword, "ADOBERGB24-48", 13)) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

        cupsFilePrintf(fp, "*ColorModel AdobeRGB/%s: \"<</cupsColorSpace 20/cupsBitsPerColor 16/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       _cupsLangString(lang, _("Deep Color (Wide Color Gamut, AdobeRGB)")));

        if (!default_color)
	  default_color = "AdobeRGB";
      } else if ((!strcasecmp(keyword, "adobe-rgb_8") ||
		  !strcmp(keyword, "ADOBERGB24")) &&
		 !ippContainsString(attr, "adobe-rgb_16")) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

        cupsFilePrintf(fp, "*ColorModel AdobeRGB/%s: \"<</cupsColorSpace 20/cupsBitsPerColor 8/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       _cupsLangString(lang, _("Deep Color (Wide Color Gamut, AdobeRGB)")));

        if (!default_color)
	  default_color = "AdobeRGB";
      } else if ((!strcasecmp(keyword, "black_8") &&
		  !ippContainsString(attr, "black_16")) ||
		 !strcmp(keyword, "DEVW8")) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

        cupsFilePrintf(fp, "*ColorModel DeviceGray/%s: \"<</cupsColorSpace 0/cupsBitsPerColor 8/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       _cupsLangString(lang, _("Device Gray")));
      } else if (!strcasecmp(keyword, "black_16") ||
		 !strcmp(keyword, "DEVW16") ||
		 !strcmp(keyword, "DEVW8-16")) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

        cupsFilePrintf(fp, "*ColorModel DeviceGray/%s: \"<</cupsColorSpace 0/cupsBitsPerColor 16/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       _cupsLangString(lang, _("Device Gray")));
      } else if ((!strcasecmp(keyword, "cmyk_8") &&
		  !ippContainsString(attr, "cmyk_16")) ||
		 !strcmp(keyword, "DEVCMYK32")) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

        cupsFilePrintf(fp, "*ColorModel CMYK/%s: \"<</cupsColorSpace 6/cupsBitsPerColor 8/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       _cupsLangString(lang, _("Device CMYK")));
      } else if (!strcasecmp(keyword, "cmyk_16") ||
		 !strcmp(keyword, "DEVCMYK32-64") ||
		 !strcmp(keyword, "DEVCMYK64")) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

        cupsFilePrintf(fp, "*ColorModel CMYK/%s: \"<</cupsColorSpace 6/cupsBitsPerColor 16/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       _cupsLangString(lang, _("Device CMYK")));
      } else if ((!strcasecmp(keyword, "rgb_8") &&
		  !ippContainsString(attr, "rgb_16")) ||
		 !strcmp(keyword, "DEVRGB24")) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

        cupsFilePrintf(fp, "*ColorModel DeviceRGB/%s: \"<</cupsColorSpace 1/cupsBitsPerColor 8/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       _cupsLangString(lang, _("Device RGB")));
      } else if (!strcasecmp(keyword, "rgb_16") ||
		 !strcmp(keyword, "DEVRGB24-48") ||
		 !strcmp(keyword, "DEVRGB48")) {
        if (first_choice) {
	  first_choice = 0;
	  cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
			 "*OrderDependency: 10 AnySetup *ColorModel\n",
			 (human_readable ? human_readable :
			  _cupsLangString(lang, _("Color Mode"))));
	}

        cupsFilePrintf(fp, "*ColorModel DeviceRGB/%s: \"<</cupsColorSpace 1/cupsBitsPerColor 16/cupsColorOrder 0/cupsCompression 0>>setpagedevice\"\n",
		       _cupsLangString(lang, _("Device RGB")));
      }
    }

    if (default_pagesize != NULL) {
      /* Here we are dealing with a cluster, if the default cluster color
         is not supplied we set it Gray*/
      if (default_cluster_color != NULL) {
	default_color = default_cluster_color;
      } else
	default_color = "Gray";
    }

    if (default_color) {
      cupsFilePrintf(fp, "*DefaultColorModel: %s\n", default_color);
      cupsFilePuts(fp, "*CloseUI: *ColorModel\n");
    }
  } else {
    cupsFilePrintf(fp, "*OpenUI *ColorModel/%s: PickOne\n"
		       "*OrderDependency: 10 AnySetup *ColorModel\n",
		       (human_readable ? human_readable :
			_cupsLangString(lang, _("Color Mode"))));
    cupsFilePrintf(fp, "*DefaultColorModel: Gray\n");
    cupsFilePuts(fp, "*ColorModel FastGray/Fast Grayscale: \"<</cupsColorSpace 3/cupsBitsPerColor 1/cupsColorOrder 0/cupsCompression 0/ProcessColorModel /DeviceGray>>setpagedevice\"\n");
    cupsFilePuts(fp, "*ColorModel Gray/Grayscale: \"<</cupsColorSpace 18/cupsBitsPerColor 8/cupsColorOrder 0/cupsCompression 0/ProcessColorModel /DeviceGray>>setpagedevice\"\n");
    if (color) {
      /* Color printer according to DNS-SD (or unknown) */
      cupsFilePuts(fp, "*ColorModel RGB/Color: \"<</cupsColorSpace 19/cupsBitsPerColor 8/cupsColorOrder 0/cupsCompression 0/ProcessColorModel /DeviceRGB>>setpagedevice\"\n");
    }
    cupsFilePuts(fp, "*CloseUI: *ColorModel\n");
  }

 /*
  * Duplex...
  */

  if (((attr = ippFindAttribute(response, "sides-supported",
				IPP_TAG_KEYWORD)) != NULL &&
       ippContainsString(attr, "two-sided-long-edge")) ||
      (attr == NULL && duplex)) {
    human_readable = lookup_option("sides", opt_strings_catalog,
				   printer_opt_strings_catalog);
    cupsFilePrintf(fp, "*OpenUI *Duplex/%s: PickOne\n"
		   "*OrderDependency: 10 AnySetup *Duplex\n"
		   "*DefaultDuplex: None\n",
		   (human_readable ? human_readable :
		    _cupsLangString(lang, _("2-Sided Printing"))));
    human_readable = lookup_choice("one-sided", "sides", opt_strings_catalog,
				   printer_opt_strings_catalog);
    cupsFilePrintf(fp, "*Duplex None/%s: \"<</Duplex false>>setpagedevice\"\n",
		   (human_readable ? human_readable :
		    _cupsLangString(lang, _("Off (1-Sided)"))));
    human_readable = lookup_choice("two-sided-long-edge", "sides",
				   opt_strings_catalog,
				   printer_opt_strings_catalog);
    cupsFilePrintf(fp, "*Duplex DuplexNoTumble/%s: \"<</Duplex true/Tumble false>>setpagedevice\"\n",
		   (human_readable ? human_readable :
		    _cupsLangString(lang, _("Long-Edge (Portrait)"))));
    human_readable = lookup_choice("two-sided-short-edge", "sides",
				   opt_strings_catalog,
				   printer_opt_strings_catalog);
    cupsFilePrintf(fp, "*Duplex DuplexTumble/%s: \"<</Duplex true/Tumble true>>setpagedevice\"\n",
		   (human_readable ? human_readable :
		    _cupsLangString(lang, _("Short-Edge (Landscape)"))));
    cupsFilePrintf(fp, "*CloseUI: *Duplex\n");

    if ((attr = ippFindAttribute(response, "pwg-raster-document-sheet-back",
				 IPP_TAG_KEYWORD)) != NULL) {
      keyword = ippGetString(attr, 0, NULL); /* Keyword value */

      if (!strcmp(keyword, "flipped"))
        cupsFilePuts(fp, "*cupsBackSide: Flipped\n");
      else if (!strcmp(keyword, "manual-tumble"))
        cupsFilePuts(fp, "*cupsBackSide: ManualTumble\n");
      else if (!strcmp(keyword, "normal"))
        cupsFilePuts(fp, "*cupsBackSide: Normal\n");
      else
        cupsFilePuts(fp, "*cupsBackSide: Rotated\n");
    } else if ((attr = ippFindAttribute(response, "urf-supported",
					IPP_TAG_KEYWORD)) != NULL) {
      for (i = 0, count = ippGetCount(attr); i < count; i ++) {
	const char *dm = ippGetString(attr, i, NULL); /* DM value */

	if (!_cups_strcasecmp(dm, "DM1")) {
	  cupsFilePuts(fp, "*cupsBackSide: Normal\n");
	  break;
	} else if (!_cups_strcasecmp(dm, "DM2")) {
	  cupsFilePuts(fp, "*cupsBackSide: Flipped\n");
	  break;
	} else if (!_cups_strcasecmp(dm, "DM3")) {
	  cupsFilePuts(fp, "*cupsBackSide: Rotated\n");
	  break;
	} else if (!_cups_strcasecmp(dm, "DM4")) {
	  cupsFilePuts(fp, "*cupsBackSide: ManualTumble\n");
	  break;
	}
      }
    }
  }

 /*
  * Output bin...
  */

  if ((attr = ippFindAttribute(response, "output-bin-default",
			       IPP_TAG_ZERO)) != NULL)
    pwg_ppdize_name(ippGetString(attr, 0, NULL), ppdname, sizeof(ppdname));
  else
    strlcpy(ppdname, "Unknown", sizeof(ppdname));

  if ((attr = ippFindAttribute(response, "output-bin-supported",
			       IPP_TAG_ZERO)) != NULL &&
      (count = ippGetCount(attr)) > 1) {
    static const char * const output_bins[][2] =
    {					/* "output-bin" strings */
      { "auto", _("Automatic") },
      { "bottom", _("Bottom Tray") },
      { "center", _("Center Tray") },
      { "face-down", _("Face Down") },
      { "face-up", _("Face Up") },
      { "large-capacity", _("Large Capacity Tray") },
      { "left", _("Left Tray") },
      { "mailbox-1", _("Mailbox 1") },
      { "mailbox-2", _("Mailbox 2") },
      { "mailbox-3", _("Mailbox 3") },
      { "mailbox-4", _("Mailbox 4") },
      { "mailbox-5", _("Mailbox 5") },
      { "mailbox-6", _("Mailbox 6") },
      { "mailbox-7", _("Mailbox 7") },
      { "mailbox-8", _("Mailbox 8") },
      { "mailbox-9", _("Mailbox 9") },
      { "mailbox-10", _("Mailbox 10") },
      { "middle", _("Middle") },
      { "my-mailbox", _("My Mailbox") },
      { "rear", _("Rear Tray") },
      { "right", _("Right Tray") },
      { "side", _("Side Tray") },
      { "stacker-1", _("Stacker 1") },
      { "stacker-2", _("Stacker 2") },
      { "stacker-3", _("Stacker 3") },
      { "stacker-4", _("Stacker 4") },
      { "stacker-5", _("Stacker 5") },
      { "stacker-6", _("Stacker 6") },
      { "stacker-7", _("Stacker 7") },
      { "stacker-8", _("Stacker 8") },
      { "stacker-9", _("Stacker 9") },
      { "stacker-10", _("Stacker 10") },
      { "top", _("Top Tray") },
      { "tray-1", _("Tray 1") },
      { "tray-2", _("Tray 2") },
      { "tray-3", _("Tray 3") },
      { "tray-4", _("Tray 4") },
      { "tray-5", _("Tray 5") },
      { "tray-6", _("Tray 6") },
      { "tray-7", _("Tray 7") },
      { "tray-8", _("Tray 8") },
      { "tray-9", _("Tray 9") },
      { "tray-10", _("Tray 10") }
    };

    human_readable = lookup_option("output-bin", opt_strings_catalog,
				   printer_opt_strings_catalog);
    cupsFilePrintf(fp, "*OpenUI *OutputBin/%s: PickOne\n"
		   "*OrderDependency: 10 AnySetup *OutputBin\n"
		   "*DefaultOutputBin: %s\n",
		   (human_readable ? human_readable : "Output Bin"),
		   ppdname);
    attr2 = ippFindAttribute(response, "printer-output-tray", IPP_TAG_STRING);
    for (i = 0; i < count; i ++) {
      keyword = ippGetString(attr, i, NULL);

      pwg_ppdize_name(keyword, ppdname, sizeof(ppdname));

      human_readable = lookup_choice((char *)keyword, "output-bin",
				     opt_strings_catalog,
				     printer_opt_strings_catalog);
      if (human_readable == NULL)
	for (j = 0; j < (int)(sizeof(output_bins) / sizeof(output_bins[0]));
	     j ++)
	  if (!strcmp(output_bins[j][0], keyword)) {
	    human_readable = (char *)_cupsLangString(lang, output_bins[j][1]);
	    break;
	  }
      cupsFilePrintf(fp, "*OutputBin %s%s%s: \"\"\n",
		     ppdname,
		     (human_readable ? "/" : ""),
		     (human_readable ? human_readable : ""));
      outputorderinfofound = 0;
      faceupdown = 1;
      firsttolast = 1;
      if (attr2 && i < ippGetCount(attr2)) {
	outbin_properties_octet = ippGetOctetString(attr2, i, &octet_str_len);
	memset(outbin_properties, 0, sizeof(outbin_properties));
	memcpy(outbin_properties, outbin_properties_octet,
	       ((size_t)octet_str_len < sizeof(outbin_properties) - 1 ?
		(size_t)octet_str_len : sizeof(outbin_properties) - 1));
	if (strcasestr(outbin_properties, "pagedelivery=faceUp")) {
	  outputorderinfofound = 1;
	  faceupdown = -1;
	} else if (strcasestr(outbin_properties, "pagedelivery=faceDown")) {
	  outputorderinfofound = 1;
	  faceupdown = 1;
	}
	if (strcasestr(outbin_properties, "stackingorder=lastToFirst")) {
	  outputorderinfofound = 1;
	  firsttolast = -1;
	} else if (strcasestr(outbin_properties, "stackingorder=firstToLast")) {
	  outputorderinfofound = 1;
	  firsttolast = 1;
	}
      }
      if (outputorderinfofound == 0) {
	if (strcasestr(keyword, "face-up")) {
	  outputorderinfofound = 1;
	  faceupdown = -1;
	}
	if (strcasestr(keyword, "face-down")) {
	  outputorderinfofound = 1;
	  faceupdown = 1;
	}
      }
      if (outputorderinfofound)
	cupsFilePrintf(fp, "*PageStackOrder %s: %s\n",
		       ppdname,
		       (firsttolast * faceupdown < 0 ? "Reverse" : "Normal"));
    }
    cupsFilePuts(fp, "*CloseUI: *OutputBin\n");
  }

 /*
  * Finishing options...
  *
  * Eventually need to re-add support for finishings-col-database, however
  * it is difficult to map arbitrary finishing-template values to PPD options
  * and have the right constraints apply (e.g. stapling vs. folding vs.
  * punching, etc.)
  */

  if ((attr = ippFindAttribute(response, "finishings-supported",
			       IPP_TAG_ENUM)) != NULL) {
    const char		*name;		/* String name */
    int			value;		/* Enum value */
    cups_array_t	*names;		/* Names we've added */
    static const char * const finishings[][2] =
    {					/* Finishings strings */
      { "bale", _("Bale") },
      { "bind", _("Bind") },
      { "bind-bottom", _("Bind (Reverse Landscape)") },
      { "bind-left", _("Bind (Portrait)") },
      { "bind-right", _("Bind (Reverse Portrait)") },
      { "bind-top", _("Bind (Landscape)") },
      { "booklet-maker", _("Booklet Maker") },
      { "coat", _("Coat") },
      { "cover", _("Cover") },
      { "edge-stitch", _("Staple Edge") },
      { "edge-stitch-bottom", _("Staple Edge (Reverse Landscape)") },
      { "edge-stitch-left", _("Staple Edge (Portrait)") },
      { "edge-stitch-right", _("Staple Edge (Reverse Portrait)") },
      { "edge-stitch-top", _("Staple Edge (Landscape)") },
      { "fold", _("Fold") },
      { "fold-accordian", _("Accordian Fold") },
      { "fold-double-gate", _("Double Gate Fold") },
      { "fold-engineering-z", _("Engineering Z Fold") },
      { "fold-gate", _("Gate Fold") },
      { "fold-half", _("Half Fold") },
      { "fold-half-z", _("Half Z Fold") },
      { "fold-left-gate", _("Left Gate Fold") },
      { "fold-letter", _("Letter Fold") },
      { "fold-parallel", _("Parallel Fold") },
      { "fold-poster", _("Poster Fold") },
      { "fold-right-gate", _("Right Gate Fold") },
      { "fold-z", _("Z Fold") },
      { "jog-offset", _("Jog") },
      { "laminate", _("Laminate") },
      { "punch", _("Punch") },
      { "punch-bottom-left", _("Single Punch (Reverse Landscape)") },
      { "punch-bottom-right", _("Single Punch (Reverse Portrait)") },
      { "punch-double-bottom", _("2-Hole Punch (Reverse Portrait)") },
      { "punch-double-left", _("2-Hole Punch (Reverse Landscape)") },
      { "punch-double-right", _("2-Hole Punch (Landscape)") },
      { "punch-double-top", _("2-Hole Punch (Portrait)") },
      { "punch-quad-bottom", _("4-Hole Punch (Reverse Landscape)") },
      { "punch-quad-left", _("4-Hole Punch (Portrait)") },
      { "punch-quad-right", _("4-Hole Punch (Reverse Portrait)") },
      { "punch-quad-top", _("4-Hole Punch (Landscape)") },
      { "punch-top-left", _("Single Punch (Portrait)") },
      { "punch-top-right", _("Single Punch (Landscape)") },
      { "punch-triple-bottom", _("3-Hole Punch (Reverse Landscape)") },
      { "punch-triple-left", _("3-Hole Punch (Portrait)") },
      { "punch-triple-right", _("3-Hole Punch (Reverse Portrait)") },
      { "punch-triple-top", _("3-Hole Punch (Landscape)") },
      { "punch-multiple-bottom", _("Multi-Hole Punch (Reverse Landscape)") },
      { "punch-multiple-left", _("Multi-Hole Punch (Portrait)") },
      { "punch-multiple-right", _("Multi-Hole Punch (Reverse Portrait)") },
      { "punch-multiple-top", _("Multi-Hole Punch (Landscape)") },
      { "saddle-stitch", _("Saddle Stitch") },
      { "staple", _("Staple") },
      { "staple-bottom-left", _("Single Staple (Reverse Landscape)") },
      { "staple-bottom-right", _("Single Staple (Reverse Portrait)") },
      { "staple-dual-bottom", _("Double Staple (Reverse Landscape)") },
      { "staple-dual-left", _("Double Staple (Portrait)") },
      { "staple-dual-right", _("Double Staple (Reverse Portrait)") },
      { "staple-dual-top", _("Double Staple (Landscape)") },
      { "staple-top-left", _("Single Staple (Portrait)") },
      { "staple-top-right", _("Single Staple (Landscape)") },
      { "staple-triple-bottom", _("Triple Staple (Reverse Landscape)") },
      { "staple-triple-left", _("Triple Staple (Portrait)") },
      { "staple-triple-right", _("Triple Staple (Reverse Portrait)") },
      { "staple-triple-top", _("Triple Staple (Landscape)") },
      { "trim", _("Cut Media") }
    };

    count = ippGetCount(attr);
    names = cupsArrayNew3((cups_array_func_t)strcmp, NULL, NULL, 0,
			  (cups_acopy_func_t)strdup, (cups_afree_func_t)free);
    fin_options = cupsArrayNew((cups_array_func_t)strcmp, NULL);

   /*
    * Staple/Bind/Stitch
    */

    for (i = 0; i < count; i ++) {
      value = ippGetInteger(attr, i);
      name  = ippEnumString("finishings", value);

      if (!strncmp(name, "staple-", 7) || !strncmp(name, "bind-", 5) ||
	  !strncmp(name, "edge-stitch-", 12) || !strcmp(name, "saddle-stitch"))
        break;
    }

    if (i < count) {
      cupsArrayAdd(fin_options, "*StapleLocation");

      human_readable = lookup_choice("staple", "finishing-template",
				     opt_strings_catalog,
				     printer_opt_strings_catalog);
      cupsFilePrintf(fp, "*OpenUI *StapleLocation/%s: PickOne\n",
		     (human_readable ? human_readable :
		      _cupsLangString(lang, _("Staple"))));
      cupsFilePuts(fp, "*OrderDependency: 10 AnySetup *StapleLocation\n");
      cupsFilePuts(fp, "*DefaultStapleLocation: None\n");
      cupsFilePrintf(fp, "*StapleLocation None/%s: \"\"\n",
		     _cupsLangString(lang, _("None")));

      for (; i < count; i ++) {
        value = ippGetInteger(attr, i);
        name  = ippEnumString("finishings", value);
	snprintf(buf, sizeof(buf), "%d", value);

        if (strncmp(name, "staple-", 7) && strncmp(name, "bind-", 5) &&
	    strncmp(name, "edge-stitch-", 12) && strcmp(name, "saddle-stitch"))
          continue;

        if (cupsArrayFind(names, (char *)name))
          continue; /* Already did this finishing template */

        cupsArrayAdd(names, (char *)name);

	human_readable = lookup_choice(buf, "finishings", opt_strings_catalog,
				       printer_opt_strings_catalog);
	if (human_readable == NULL)
	  for (j = 0; j < (int)(sizeof(finishings) / sizeof(finishings[0]));
	       j ++)
	    if (!strcmp(finishings[j][0], name)) {
	      human_readable = (char *)_cupsLangString(lang, finishings[j][1]);
	      break;
	    }
	cupsFilePrintf(fp, "*StapleLocation %s%s%s: \"\"\n", name,
		       (human_readable ? "/" : ""),
		       (human_readable ? human_readable : ""));
	cupsFilePrintf(fp, "*cupsIPPFinishings %d/%s: \"*StapleLocation %s\"\n",
		       value, name, name);
      }

      cupsFilePuts(fp, "*CloseUI: *StapleLocation\n");
    }

   /*
    * Fold
    */

    for (i = 0; i < count; i ++) {
      value = ippGetInteger(attr, i);
      name  = ippEnumString("finishings", value);

      if (!strncmp(name, "fold-", 5))
        break;
    }

    if (i < count) {
      cupsArrayAdd(fin_options, "*FoldType");

      human_readable = lookup_choice("fold", "finishing-template",
				     opt_strings_catalog,
				     printer_opt_strings_catalog);
      cupsFilePrintf(fp, "*OpenUI *FoldType/%s: PickOne\n",
		     (human_readable ? human_readable :
		      _cupsLangString(lang, _("Fold"))));
      cupsFilePuts(fp, "*OrderDependency: 10 AnySetup *FoldType\n");
      cupsFilePuts(fp, "*DefaultFoldType: None\n");
      cupsFilePrintf(fp, "*FoldType None/%s: \"\"\n",
		     _cupsLangString(lang, _("None")));

      for (; i < count; i ++) {
        value = ippGetInteger(attr, i);
        name  = ippEnumString("finishings", value);
	snprintf(buf, sizeof(buf), "%d", value);

        if (strncmp(name, "fold-", 5))
          continue;

        if (cupsArrayFind(names, (char *)name))
          continue; /* Already did this finishing template */

        cupsArrayAdd(names, (char *)name);

	human_readable = lookup_choice(buf, "finishings", opt_strings_catalog,
				       printer_opt_strings_catalog);
	if (human_readable == NULL)
	  for (j = 0; j < (int)(sizeof(finishings) / sizeof(finishings[0]));
	       j ++)
	    if (!strcmp(finishings[j][0], name)) {
	      human_readable = (char *)_cupsLangString(lang, finishings[j][1]);
	      break;
	    }
	cupsFilePrintf(fp, "*FoldType %s%s%s: \"\"\n", name,
		       (human_readable ? "/" : ""),
		       (human_readable ? human_readable : ""));
	cupsFilePrintf(fp, "*cupsIPPFinishings %d/%s: \"*FoldType %s\"\n",
		       value, name, name);
      }

      cupsFilePuts(fp, "*CloseUI: *FoldType\n");
    }

   /*
    * Punch
    */

    for (i = 0; i < count; i ++) {
      value = ippGetInteger(attr, i);
      name  = ippEnumString("finishings", value);

      if (!strncmp(name, "punch-", 6))
        break;
    }

    if (i < count) {
      cupsArrayAdd(fin_options, "*PunchMedia");

      human_readable = lookup_choice("punch", "finishing-template",
				     opt_strings_catalog,
				     printer_opt_strings_catalog);
      cupsFilePrintf(fp, "*OpenUI *PunchMedia/%s: PickOne\n",
		     (human_readable ? human_readable :
		      _cupsLangString(lang, _("Punch"))));
      cupsFilePuts(fp, "*OrderDependency: 10 AnySetup *PunchMedia\n");
      cupsFilePuts(fp, "*DefaultPunchMedia: None\n");
      cupsFilePrintf(fp, "*PunchMedia None/%s: \"\"\n",
		     _cupsLangString(lang, _("None")));

      for (; i < count; i ++) {
        value = ippGetInteger(attr, i);
        name  = ippEnumString("finishings", value);
	snprintf(buf, sizeof(buf), "%d", value);

        if (strncmp(name, "punch-", 6))
          continue;

        if (cupsArrayFind(names, (char *)name))
          continue; /* Already did this finishing template */

        cupsArrayAdd(names, (char *)name);

	human_readable = lookup_choice(buf, "finishings", opt_strings_catalog,
				       printer_opt_strings_catalog);
	if (human_readable == NULL)
	  for (j = 0; j < (int)(sizeof(finishings) / sizeof(finishings[0]));
	       j ++)
	    if (!strcmp(finishings[j][0], name)) {
	      human_readable = (char *)_cupsLangString(lang, finishings[j][1]);
	      break;
	    }
	cupsFilePrintf(fp, "*PunchMedia %s%s%s: \"\"\n", name,
		       (human_readable ? "/" : ""),
		       (human_readable ? human_readable : ""));
	cupsFilePrintf(fp, "*cupsIPPFinishings %d/%s: \"*PunchMedia %s\"\n",
		       value, name, name);
      }

      cupsFilePuts(fp, "*CloseUI: *PunchMedia\n");
    }

   /*
    * Booklet
    */

    if (ippContainsInteger(attr, IPP_FINISHINGS_BOOKLET_MAKER)) {
      cupsArrayAdd(fin_options, "*Booklet");

      human_readable = lookup_choice("booklet-maker", "finishing-template",
				     opt_strings_catalog,
				     printer_opt_strings_catalog);
      cupsFilePrintf(fp, "*OpenUI *Booklet/%s: Boolean\n",
		     (human_readable ? human_readable :
		      _cupsLangString(lang, _("Booklet"))));
      cupsFilePuts(fp, "*OrderDependency: 10 AnySetup *Booklet\n");
      cupsFilePuts(fp, "*DefaultBooklet: False\n");
      cupsFilePuts(fp, "*Booklet False: \"\"\n");
      cupsFilePuts(fp, "*Booklet True: \"\"\n");
      cupsFilePrintf(fp, "*cupsIPPFinishings %d/booklet-maker: \"*Booklet True\"\n",
		     IPP_FINISHINGS_BOOKLET_MAKER);
      cupsFilePuts(fp, "*CloseUI: *Booklet\n");
    }

    cupsArrayDelete(names);
  }

  if ((attr = ippFindAttribute(response, "finishings-col-database",
			       IPP_TAG_BEGIN_COLLECTION)) != NULL) {
    ipp_t	    *finishing_col;	/* Current finishing collection */
    ipp_attribute_t *finishing_attr;	/* Current finishing member attribute */
    cups_array_t    *templates;		/* Finishing templates */

    cupsFilePrintf(fp, "*OpenUI *cupsFinishingTemplate/%s: PickOne\n",
		   _cupsLangString(lang, _("Finishing Preset")));
    cupsFilePuts(fp, "*OrderDependency: 10 AnySetup *cupsFinishingTemplate\n");
    cupsFilePuts(fp, "*DefaultcupsFinishingTemplate: none\n");
    cupsFilePrintf(fp, "*cupsFinishingTemplate none/%s: \"\"\n",
		   _cupsLangString(lang, _("None")));

    templates = cupsArrayNew((cups_array_func_t)strcmp, NULL);
    count     = ippGetCount(attr);

    for (i = 0; i < count; i ++) {
      finishing_col = ippGetCollection(attr, i);
      keyword = ippGetString(ippFindAttribute(finishing_col,
					      "finishing-template",
					      IPP_TAG_ZERO), 0, NULL);

      if (!keyword || cupsArrayFind(templates, (void *)keyword))
        continue;

      if (strncmp(keyword, "fold-", 5) && (strstr(keyword, "-bottom") ||
					   strstr(keyword, "-left") ||
					   strstr(keyword, "-right") ||
					   strstr(keyword, "-top")))
        continue;

      cupsArrayAdd(templates, (void *)keyword);

      human_readable = lookup_choice((char *)keyword, "finishing-template",
				     opt_strings_catalog,
				     printer_opt_strings_catalog);
      if (human_readable == NULL)
	human_readable = (char *)keyword;
      cupsFilePrintf(fp, "*cupsFinishingTemplate %s/%s: \"\n", keyword,
		     human_readable);
      for (finishing_attr = ippFirstAttribute(finishing_col); finishing_attr;
	   finishing_attr = ippNextAttribute(finishing_col)) {
        if (ippGetValueTag(finishing_attr) == IPP_TAG_BEGIN_COLLECTION) {
	  const char *name = ippGetName(finishing_attr); /* Member attribute
							    name */

          if (strcmp(name, "media-size"))
            cupsFilePrintf(fp, "%s\n", name);
	}
      }
      cupsFilePuts(fp, "\"\n");
      cupsFilePuts(fp, "*End\n");
    }

    cupsFilePuts(fp, "*CloseUI: *cupsFinishingTemplate\n");

    if (cupsArrayCount(fin_options)) {
      const char	*fin_option;	/* Current finishing option */

      cupsFilePuts(fp, "*cupsUIConstraint finishing-template: \"*cupsFinishingTemplate");
      for (fin_option = (const char *)cupsArrayFirst(fin_options); fin_option;
	   fin_option = (const char *)cupsArrayNext(fin_options))
        cupsFilePrintf(fp, " %s", fin_option);
      cupsFilePuts(fp, "\"\n");

      cupsFilePuts(fp, "*cupsUIResolver finishing-template: \"*cupsFinishingTemplate None");
      for (fin_option = (const char *)cupsArrayFirst(fin_options); fin_option;
	   fin_option = (const char *)cupsArrayNext(fin_options))
        cupsFilePrintf(fp, " %s None", fin_option);
      cupsFilePuts(fp, "\"\n");
    }

    cupsArrayDelete(templates);
  }

  cupsArrayDelete(fin_options);

 /*
  * DefaultResolution...
  */

  xres = common_def->x;
  yres = common_def->y;
  if (xres == yres)
    cupsFilePrintf(fp, "*DefaultResolution: %ddpi\n", xres);
  else
    cupsFilePrintf(fp, "*DefaultResolution: %dx%ddpi\n", xres, yres);

 /*
  * cupsPrintQuality...
  */

  if ((quality =
       ippFindAttribute(response, "print-quality-supported",
			IPP_TAG_ENUM)) != NULL) {
    human_readable = lookup_option("print-quality", opt_strings_catalog,
				   printer_opt_strings_catalog);
    cupsFilePrintf(fp, "*OpenUI *cupsPrintQuality/%s: PickOne\n"
		   "*OrderDependency: 10 AnySetup *cupsPrintQuality\n"
		   "*DefaultcupsPrintQuality: %d\n",
		   (human_readable ? human_readable :
		    _cupsLangString(lang, _("Print Quality"))),
		   IPP_QUALITY_NORMAL);
    if (ippContainsInteger(quality, IPP_QUALITY_DRAFT)) {
      human_readable = lookup_choice("3", "print-quality", opt_strings_catalog,
				     printer_opt_strings_catalog);
      cupsFilePrintf(fp, "*cupsPrintQuality %d/%s: \"<</HWResolution[%d %d]>>setpagedevice\"\n",
		     IPP_QUALITY_DRAFT,
		     (human_readable ? human_readable :
		      _cupsLangString(lang, _("Draft"))),
		     min_res->x, min_res->y);
    }
    human_readable = lookup_choice("4", "print-quality", opt_strings_catalog,
				   printer_opt_strings_catalog);
    cupsFilePrintf(fp, "*cupsPrintQuality %d/%s: \"<</HWResolution[%d %d]>>setpagedevice\"\n",
		   IPP_QUALITY_NORMAL,
		   (human_readable ? human_readable :
		    _cupsLangString(lang, _("Normal"))),
		   common_def->x, common_def->y);
    if (ippContainsInteger(quality, IPP_QUALITY_HIGH)) {
      human_readable = lookup_choice("5", "print-quality", opt_strings_catalog,
				     printer_opt_strings_catalog);
      cupsFilePrintf(fp, "*cupsPrintQuality %d/%s: \"<</HWResolution[%d %d]>>setpagedevice\"\n",
		     IPP_QUALITY_HIGH,
		     (human_readable ? human_readable :
		      _cupsLangString(lang, _("High"))),
		     max_res->x, max_res->y);
    }
    cupsFilePuts(fp, "*CloseUI: *cupsPrintQuality\n");
  }

  /* Only add these options if jobs get sent to the printer as PDF,
     PWG Raster, or Apple Raster, as only then arbitrary IPP
     attributes get passed through from the filter command line
     to the printer by the "ipp" CUPS backend. */
  if (is_pdf || is_pwg || is_apple) {
    /*
     * Print Optimization ...
     */

    if ((attr = ippFindAttribute(response, "print-content-optimize-default",
				 IPP_TAG_ZERO)) != NULL)
      strlcpy(ppdname, ippGetString(attr, 0, NULL), sizeof(ppdname));
    else
      strlcpy(ppdname, "auto", sizeof(ppdname));

    if ((attr = ippFindAttribute(response, "print-content-optimize-supported",
				 IPP_TAG_ZERO)) != NULL &&
	(count = ippGetCount(attr)) > 1) {
      static const char * const content_optimize_types[][2] =
      {					/* "print-content-optimize" strings */
	{ "auto", _("Automatic") },
	{ "graphic", _("Graphics") },
	{ "graphics", _("Graphics") },
	{ "photo", _("Photo") },
	{ "text", _("Text") },
	{ "text-and-graphic", _("Text And Graphics") },
	{ "text-and-graphics", _("Text And Graphics") }
      };

      human_readable = lookup_option("print-content-optimize",
				     opt_strings_catalog,
				     printer_opt_strings_catalog);
      cupsFilePrintf(fp, "*OpenUI *print-content-optimize/%s: PickOne\n"
		     "*OrderDependency: 10 AnySetup *print-content-optimize\n"
		     "*Defaultprint-content-optimize: %s\n",
		     (human_readable ? human_readable : "Print Optimization"),
		     ppdname);
      for (i = 0; i < count; i ++) {
	keyword = ippGetString(attr, i, NULL);

	human_readable = lookup_choice((char *)keyword,
				       "print-content-optimize",
				       opt_strings_catalog,
				       printer_opt_strings_catalog);
	if (human_readable == NULL)
	  for (j = 0;
	       j < (int)(sizeof(content_optimize_types) /
			 sizeof(content_optimize_types[0]));
	       j ++)
	    if (!strcmp(content_optimize_types[j][0], keyword)) {
	      human_readable =
		(char *)_cupsLangString(lang,
					content_optimize_types[j][1]);
	      break;
	    }
	cupsFilePrintf(fp, "*print-content-optimize %s%s%s: \"\"\n",
		       keyword,
		       (human_readable ? "/" : ""),
		       (human_readable ? human_readable : ""));
      }
      cupsFilePuts(fp, "*CloseUI: *print-content-optimize\n");
    }

    /*
     * Print Rendering Intent ...
     */

    if ((attr = ippFindAttribute(response, "print-rendering-intent-default",
				 IPP_TAG_ZERO)) != NULL)
      strlcpy(ppdname, ippGetString(attr, 0, NULL), sizeof(ppdname));
    else
      strlcpy(ppdname, "auto", sizeof(ppdname));

    if ((attr = ippFindAttribute(response, "print-rendering-intent-supported",
				 IPP_TAG_ZERO)) != NULL &&
	(count = ippGetCount(attr)) > 1) {
      static const char * const rendering_intents[][2] =
      {					/* "print-rendering-intent" strings */
	{ "auto", _("Automatic") },
	{ "absolute", _("Absolute") },
	{ "perceptual", _("Perceptual") },
	{ "relative", _("Relative") },
	{ "relative-bpc", _("Relative w/Black Point Compensation") },
	{ "saturation", _("Saturation") }
      };

      human_readable = lookup_option("print-rendering-intent",
				     opt_strings_catalog,
				     printer_opt_strings_catalog);
      cupsFilePrintf(fp, "*OpenUI *print-rendering-intent/%s: PickOne\n"
		     "*OrderDependency: 10 AnySetup *print-rendering-intent\n"
		     "*Defaultprint-rendering-intent: %s\n",
		     (human_readable ? human_readable :
		      "Print Rendering Intent"),
		     ppdname);
      for (i = 0; i < count; i ++) {
	keyword = ippGetString(attr, i, NULL);

	human_readable = lookup_choice((char *)keyword,
				       "print-rendering-intent",
				       opt_strings_catalog,
				       printer_opt_strings_catalog);
	if (human_readable == NULL)
	  for (j = 0;
	       j < (int)(sizeof(rendering_intents) /
			 sizeof(rendering_intents[0]));
	       j ++)
	    if (!strcmp(rendering_intents[j][0], keyword)) {
	      human_readable =
		(char *)_cupsLangString(lang,
					rendering_intents[j][1]);
	      break;
	    }
	cupsFilePrintf(fp, "*print-rendering-intent %s%s%s: \"\"\n",
		       keyword,
		       (human_readable ? "/" : ""),
		       (human_readable ? human_readable : ""));
      }
      cupsFilePuts(fp, "*CloseUI: *print-rendering-intent\n");
    }

    /*
     * Print Scaling ...
     */

    if ((attr = ippFindAttribute(response, "print-scaling-default",
				 IPP_TAG_ZERO)) != NULL)
      strlcpy(ppdname, ippGetString(attr, 0, NULL), sizeof(ppdname));
    else
      strlcpy(ppdname, "auto", sizeof(ppdname));

    if ((attr = ippFindAttribute(response, "print-scaling-supported",
				 IPP_TAG_ZERO)) != NULL &&
	(count = ippGetCount(attr)) > 1) {
      static const char * const scaling_types[][2] =
      {					/* "print-scaling" strings */
	{ "auto", _("Automatic") },
	{ "auto-fit", _("Auto Fit") },
	{ "fill", _("Fill") },
	{ "fit", _("Fit") },
	{ "none", _("None") }
      };

      human_readable = lookup_option("print-scaling", opt_strings_catalog,
				     printer_opt_strings_catalog);
      cupsFilePrintf(fp, "*OpenUI *print-scaling/%s: PickOne\n"
		     "*OrderDependency: 10 AnySetup *print-scaling\n"
		     "*Defaultprint-scaling: %s\n",
		     (human_readable ? human_readable : "Print Scaling"),
		     ppdname);
      for (i = 0; i < count; i ++) {
	keyword = ippGetString(attr, i, NULL);

	human_readable = lookup_choice((char *)keyword, "print-scaling",
				       opt_strings_catalog,
				       printer_opt_strings_catalog);
	if (human_readable == NULL)
	  for (j = 0;
	       j < (int)(sizeof(scaling_types) /
			 sizeof(scaling_types[0]));
	       j ++)
	    if (!strcmp(scaling_types[j][0], keyword)) {
	      human_readable =
		(char *)_cupsLangString(lang, scaling_types[j][1]);
	      break;
	    }
	cupsFilePrintf(fp, "*print-scaling %s%s%s: \"\"\n",
		       keyword,
		       (human_readable ? "/" : ""),
		       (human_readable ? human_readable : ""));
      }
      cupsFilePuts(fp, "*CloseUI: *print-scaling\n");
    }
  }

 /*
  * Presets...
  */

  if ((attr = ippFindAttribute(response, "job-presets-supported",
			       IPP_TAG_BEGIN_COLLECTION)) != NULL) {
    for (i = 0, count = ippGetCount(attr); i < count; i ++) {
      ipp_t	*preset = ippGetCollection(attr, i); /* Preset collection */
      const char *preset_name =         /* Preset name */
	ippGetString(ippFindAttribute(preset,
				      "preset-name", IPP_TAG_ZERO), 0, NULL),
		 *localized_name;	/* Localized preset name */
      ipp_attribute_t *member;		/* Member attribute in preset */
      const char *member_name;		/* Member attribute name */
      char       member_value[256];	/* Member attribute value */

      if (!preset || !preset_name)
        continue;

      if ((localized_name = lookup_option((char *)preset_name,
					  opt_strings_catalog,
					  printer_opt_strings_catalog)) == NULL)
        cupsFilePrintf(fp, "*APPrinterPreset %s: \"\n", preset_name);
      else
        cupsFilePrintf(fp, "*APPrinterPreset %s/%s: \"\n", preset_name,
		       localized_name);

      for (member = ippFirstAttribute(preset); member;
	   member = ippNextAttribute(preset)) {
        member_name = ippGetName(member);

        if (!member_name || !strcmp(member_name, "preset-name"))
          continue;

        if (!strcmp(member_name, "finishings")) {
	  for (i = 0, count = ippGetCount(member); i < count; i ++) {
	    const char *option = NULL;	/* PPD option name */

	    keyword = ippEnumString("finishings", ippGetInteger(member, i));

	    if (!strcmp(keyword, "booklet-maker")) {
	      option  = "Booklet";
	      keyword = "True";
	    }
	    else if (!strncmp(keyword, "fold-", 5))
	      option = "FoldType";
	    else if (!strncmp(keyword, "punch-", 6))
	      option = "PunchMedia";
	    else if (!strncmp(keyword, "bind-", 5) ||
		     !strncmp(keyword, "edge-stitch-", 12) ||
		     !strcmp(keyword, "saddle-stitch") ||
		     !strncmp(keyword, "staple-", 7))
	      option = "StapleLocation";

	    if (option && keyword)
	      cupsFilePrintf(fp, "*%s %s\n", option, keyword);
	  }
        } else if (!strcmp(member_name, "finishings-col")) {
          ipp_t *fin_col;		/* finishings-col value */

          for (i = 0, count = ippGetCount(member); i < count; i ++) {
            fin_col = ippGetCollection(member, i);

            if ((keyword =
		 ippGetString(ippFindAttribute(fin_col,
					       "finishing-template",
					       IPP_TAG_ZERO), 0, NULL)) != NULL)
              cupsFilePrintf(fp, "*cupsFinishingTemplate %s\n", keyword);
          }
        } else if (!strcmp(member_name, "media")) {
         /*
          * Map media to PageSize...
          */

          if ((pwg = pwgMediaForPWG(ippGetString(member, 0, NULL))) != NULL &&
	      pwg->ppd)
            cupsFilePrintf(fp, "*PageSize %s\n", pwg->ppd);
        } else if (!strcmp(member_name, "media-col")) {
          media_col = ippGetCollection(member, 0);

          if ((media_size =
	       ippGetCollection(ippFindAttribute(media_col,
						 "media-size",
						 IPP_TAG_BEGIN_COLLECTION),
				0)) != NULL) {
            x_dim = ippFindAttribute(media_size, "x-dimension",
				     IPP_TAG_INTEGER);
            y_dim = ippFindAttribute(media_size, "y-dimension",
				     IPP_TAG_INTEGER);
            if ((pwg = pwgMediaForSize(ippGetInteger(x_dim, 0),
				       ippGetInteger(y_dim, 0))) != NULL &&
		pwg->ppd)
	      cupsFilePrintf(fp, "*PageSize %s\n", pwg->ppd);
          }

          if ((keyword = ippGetString(ippFindAttribute(media_col,
						       "media-source",
						       IPP_TAG_ZERO), 0,
				      NULL)) != NULL) {
            pwg_ppdize_name(keyword, ppdname, sizeof(ppdname));
            cupsFilePrintf(fp, "*InputSlot %s\n", keyword);
	  }

          if ((keyword = ippGetString(ippFindAttribute(media_col, "media-type",
						       IPP_TAG_ZERO), 0,
				      NULL)) != NULL) {
            pwg_ppdize_name(keyword, ppdname, sizeof(ppdname));
            cupsFilePrintf(fp, "*MediaType %s\n", keyword);
	  }
        } else if (!strcmp(member_name, "print-quality")) {
	 /*
	  * Map print-quality to cupsPrintQuality...
	  */

          int qval = ippGetInteger(member, 0);
					/* print-quality value */
	  static const char * const qualities[] = { "Draft", "Normal", "High" };
					/* cupsPrintQuality values */

          if (qval >= IPP_QUALITY_DRAFT && qval <= IPP_QUALITY_HIGH)
            cupsFilePrintf(fp, "*cupsPrintQuality %s\n",
			   qualities[qval - IPP_QUALITY_DRAFT]);
        } else if (!strcmp(member_name, "output-bin")) {
          pwg_ppdize_name(ippGetString(member, 0, NULL), ppdname,
			  sizeof(ppdname));
          cupsFilePrintf(fp, "*OutputBin %s\n", ppdname);
        } else if (!strcmp(member_name, "sides")) {
          keyword = ippGetString(member, 0, NULL);
          if (keyword && !strcmp(keyword, "one-sided"))
            cupsFilePuts(fp, "*Duplex None\n");
	  else if (keyword && !strcmp(keyword, "two-sided-long-edge"))
	    cupsFilePuts(fp, "*Duplex DuplexNoTumble\n");
	  else if (keyword && !strcmp(keyword, "two-sided-short-edge"))
	    cupsFilePuts(fp, "*Duplex DuplexTumble\n");
        } else {
         /*
          * Add attribute name and value as-is...
          */

          ippAttributeString(member, member_value, sizeof(member_value));
          cupsFilePrintf(fp, "*%s %s\n", member_name, member_value);
	}
      }

      cupsFilePuts(fp, "\"\n*End\n");
    }
  }

 /*
  * constraints
  */
  if(conflicts != NULL) {
    char* constraint;
    for (constraint = (char *)cupsArrayFirst(conflicts); constraint;
         constraint = (char *)cupsArrayNext(conflicts)) {
      cupsFilePrintf(fp,"%s",constraint);
    }
  }

 /*
  * Close up and return...
  */

  free(common_def);
  free(min_res);
  free(max_res);
  
  snprintf(ppdgenerator_msg, sizeof(ppdgenerator_msg),
	   "%s PPD generated.",
	   (is_pdf ? "PDF" :
	    (is_pwg ? "PWG Raster" :
	     (is_apple ? "Apple Raster" :
	      (is_pclm ? "PCLm" :
	       "Legacy IPP printer")))));

  cupsFileClose(fp);
  if (printer_opt_strings_catalog)
    cupsArrayDelete(printer_opt_strings_catalog);

  return (buffer);

 /*
  * If we get here then there was a problem creating the PPD...
  */

 bad_ppd:

  if (common_res) cupsArrayDelete(common_res);
  if (common_def) free(common_def);
  if (min_res) free(min_res);
  if (max_res) free(max_res);

  cupsFileClose(fp);
  if (printer_opt_strings_catalog)
    cupsArrayDelete(printer_opt_strings_catalog);
  unlink(buffer);
  *buffer = '\0';

  _cupsSetError(IPP_STATUS_ERROR_INTERNAL,
		_("Printer does not support required IPP attributes or document formats."),
		1);

  return (NULL);
}


/*
 * '_pwgInputSlotForSource()' - Get the InputSlot name for the given PWG
 *                              media-source.
 */

const char *				/* O - InputSlot name */
_pwgInputSlotForSource(
    const char *media_source,		/* I - PWG media-source */
    char       *name,			/* I - Name buffer */
    size_t     namesize)		/* I - Size of name buffer */
{
 /*
  * Range check input...
  */

  if (!media_source || !name || namesize < PPD_MAX_NAME)
    return (NULL);

  if (_cups_strcasecmp(media_source, "main"))
    strlcpy(name, "Cassette", namesize);
  else if (_cups_strcasecmp(media_source, "alternate"))
    strlcpy(name, "Multipurpose", namesize);
  else if (_cups_strcasecmp(media_source, "large-capacity"))
    strlcpy(name, "LargeCapacity", namesize);
  else if (_cups_strcasecmp(media_source, "bottom"))
    strlcpy(name, "Lower", namesize);
  else if (_cups_strcasecmp(media_source, "middle"))
    strlcpy(name, "Middle", namesize);
  else if (_cups_strcasecmp(media_source, "top"))
    strlcpy(name, "Upper", namesize);
  else if (_cups_strcasecmp(media_source, "rear"))
    strlcpy(name, "Rear", namesize);
  else if (_cups_strcasecmp(media_source, "side"))
    strlcpy(name, "Side", namesize);
  else if (_cups_strcasecmp(media_source, "envelope"))
    strlcpy(name, "Envelope", namesize);
  else if (_cups_strcasecmp(media_source, "main-roll"))
    strlcpy(name, "Roll", namesize);
  else if (_cups_strcasecmp(media_source, "alternate-roll"))
    strlcpy(name, "Roll2", namesize);
  else
    pwg_ppdize_name(media_source, name, namesize);

  return (name);
}


/*
 * '_pwgMediaTypeForType()' - Get the MediaType name for the given PWG
 *                            media-type.
 */

const char *				/* O - MediaType name */
_pwgMediaTypeForType(
    const char *media_type,		/* I - PWG media-type */
    char       *name,			/* I - Name buffer */
    size_t     namesize)		/* I - Size of name buffer */
{
 /*
  * Range check input...
  */

  if (!media_type || !name || namesize < PPD_MAX_NAME)
    return (NULL);

  if (_cups_strcasecmp(media_type, "auto"))
    strlcpy(name, "Auto", namesize);
  else if (_cups_strcasecmp(media_type, "cardstock"))
    strlcpy(name, "Cardstock", namesize);
  else if (_cups_strcasecmp(media_type, "envelope"))
    strlcpy(name, "Envelope", namesize);
  else if (_cups_strcasecmp(media_type, "photographic-glossy"))
    strlcpy(name, "Glossy", namesize);
  else if (_cups_strcasecmp(media_type, "photographic-high-gloss"))
    strlcpy(name, "HighGloss", namesize);
  else if (_cups_strcasecmp(media_type, "photographic-matte"))
    strlcpy(name, "Matte", namesize);
  else if (_cups_strcasecmp(media_type, "stationery"))
    strlcpy(name, "Plain", namesize);
  else if (_cups_strcasecmp(media_type, "stationery-coated"))
    strlcpy(name, "Coated", namesize);
  else if (_cups_strcasecmp(media_type, "stationery-inkjet"))
    strlcpy(name, "Inkjet", namesize);
  else if (_cups_strcasecmp(media_type, "stationery-letterhead"))
    strlcpy(name, "Letterhead", namesize);
  else if (_cups_strcasecmp(media_type, "stationery-preprinted"))
    strlcpy(name, "Preprinted", namesize);
  else if (_cups_strcasecmp(media_type, "transparency"))
    strlcpy(name, "Transparency", namesize);
  else
    pwg_ppdize_name(media_type, name, namesize);

  return (name);
}


/*
 * '_pwgPageSizeForMedia()' - Get the PageSize name for the given media.
 */

const char *				/* O - PageSize name */
_pwgPageSizeForMedia(
    pwg_media_t *media,		/* I - Media */
    char         *name,			/* I - PageSize name buffer */
    size_t       namesize)		/* I - Size of name buffer */
{
  const char	*sizeptr,		/* Pointer to size in PWG name */
		*dimptr;		/* Pointer to dimensions in PWG name */


 /*
  * Range check input...
  */

  if (!media || !name || namesize < PPD_MAX_NAME)
    return (NULL);

 /*
  * Copy or generate a PageSize name...
  */

  if (media->ppd) {
   /*
    * Use a standard Adobe name...
    */

    strlcpy(name, media->ppd, namesize);
  }
  else if (!media->pwg || !strncmp(media->pwg, "custom_", 7) ||
           (sizeptr = strchr(media->pwg, '_')) == NULL ||
	   (dimptr = strchr(sizeptr + 1, '_')) == NULL ||
	   (size_t)(dimptr - sizeptr) > namesize) {
   /*
    * Use a name of the form "wNNNhNNN"...
    */

    snprintf(name, namesize, "w%dh%d", (int)PWG_TO_POINTS(media->width),
             (int)PWG_TO_POINTS(media->length));
  } else {
   /*
    * Copy the size name from class_sizename_dimensions...
    */

    memcpy(name, sizeptr + 1, (size_t)(dimptr - sizeptr - 1));
    name[dimptr - sizeptr - 1] = '\0';
  }

  return (name);
}


/*
 * 'pwg_ppdize_name()' - Convert an IPP keyword to a PPD keyword.
 */

static void
pwg_ppdize_name(const char *ipp,	/* I - IPP keyword */
                char       *name,	/* I - Name buffer */
		size_t     namesize)	/* I - Size of name buffer */
{
  char	*ptr,				/* Pointer into name buffer */
	*end;				/* End of name buffer */


  *name = (char)toupper(*ipp++);

  for (ptr = name + 1, end = name + namesize - 1; *ipp && ptr < end;) {
    if (*ipp == '-' && _cups_isalpha(ipp[1])) {
      ipp ++;
      *ptr++ = (char)toupper(*ipp++ & 255);
    } else
      *ptr++ = *ipp++;
  }

  *ptr = '\0';
}



/*
 * 'pwg_ppdize_resolution()' - Convert PWG resolution values to PPD values.
 */

static void
pwg_ppdize_resolution(
    ipp_attribute_t *attr,		/* I - Attribute to convert */
    int             element,		/* I - Element to convert */
    int             *xres,		/* O - X resolution in DPI */
    int             *yres,		/* O - Y resolution in DPI */
    char            *name,		/* I - Name buffer */
    size_t          namesize)		/* I - Size of name buffer */
{
  ipp_res_t units;			/* Units for resolution */

  *xres = ippGetResolution(attr, element, yres, &units);

  if (units == IPP_RES_PER_CM) {
    *xres = (int)(*xres * 2.54);
    *yres = (int)(*yres * 2.54);
  }

  if (name && namesize > 4) {
    if (*xres == *yres)
      snprintf(name, namesize, "%ddpi", *xres);
    else
      snprintf(name, namesize, "%dx%ddpi", *xres, *yres);
  }
}
#endif /* HAVE_CUPS_1_6 */