diff options
Diffstat (limited to 'man/systemd-system.conf.xml')
| -rw-r--r-- | man/systemd-system.conf.xml | 354 |
1 files changed, 0 insertions, 354 deletions
diff --git a/man/systemd-system.conf.xml b/man/systemd-system.conf.xml deleted file mode 100644 index 1b74ed38f..000000000 --- a/man/systemd-system.conf.xml +++ /dev/null @@ -1,354 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-system.conf" - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>systemd-system.conf</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-system.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-system.conf</refname> - <refname>system.conf.d</refname> - <refname>systemd-user.conf</refname> - <refname>user.conf.d</refname> - <refpurpose>System and session service manager configuration files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/system.conf</filename></para> - <para><filename>/etc/systemd/system.conf.d/*.conf</filename></para> - <para><filename>/run/systemd/system.conf.d/*.conf</filename></para> - <para><filename>/usr/lib/systemd/system.conf.d/*.conf</filename></para> - <para><filename>/etc/systemd/user.conf</filename></para> - <para><filename>/etc/systemd/user.conf.d/*.conf</filename></para> - <para><filename>/run/systemd/user.conf.d/*.conf</filename></para> - <para><filename>/usr/lib/systemd/user.conf.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>When run as a system instance, systemd interprets the - configuration file <filename>system.conf</filename> and the files - in <filename>system.conf.d</filename> directories; when run as a - user instance, systemd interprets the configuration file - <filename>user.conf</filename> and the files in - <filename>user.conf.d</filename> directories. These configuration - files contain a few settings controlling basic manager - operations.</para> - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="main-conf" /> - - <refsect1> - <title>Options</title> - - <para>All options are configured in the - <literal>[Manager]</literal> section:</para> - - <variablelist class='systemd-directives'> - - <varlistentry> - <term><varname>LogLevel=</varname></term> - <term><varname>LogTarget=</varname></term> - <term><varname>LogColor=</varname></term> - <term><varname>LogLocation=</varname></term> - <term><varname>DumpCore=yes</varname></term> - <term><varname>CrashShell=no</varname></term> - <term><varname>ShowStatus=yes</varname></term> - <term><varname>CrashChVT=1</varname></term> - <term><varname>DefaultStandardOutput=journal</varname></term> - <term><varname>DefaultStandardError=inherit</varname></term> - - <listitem><para>Configures various parameters of basic manager - operation. These options may be overridden by the respective - command line arguments. See - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for details about these command line - arguments.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CPUAffinity=</varname></term> - - <listitem><para>Configures the initial CPU affinity for the - init process. Takes a space-separated list of CPU - indices.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>JoinControllers=cpu,cpuacct net_cls,netprio</varname></term> - - <listitem><para>Configures controllers that shall be mounted - in a single hierarchy. By default, systemd will mount all - controllers which are enabled in the kernel in individual - hierarchies, with the exception of those listed in this - setting. Takes a space-separated list of comma-separated - controller names, in order to allow multiple joined - hierarchies. Defaults to 'cpu,cpuacct'. Pass an empty string - to ensure that systemd mounts all controllers in separate - hierarchies.</para> - - <para>Note that this option is only applied once, at very - early boot. If you use an initial RAM disk (initrd) that uses - systemd, it might hence be necessary to rebuild the initrd if - this option is changed, and make sure the new configuration - file is included in it. Otherwise, the initrd might mount the - controller hierarchies in a different configuration than - intended, and the main system cannot remount them - anymore.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RuntimeWatchdogSec=</varname></term> - <term><varname>ShutdownWatchdogSec=</varname></term> - - <listitem><para>Configure the hardware watchdog at runtime and - at reboot. Takes a timeout value in seconds (or in other time - units if suffixed with <literal>ms</literal>, - <literal>min</literal>, <literal>h</literal>, - <literal>d</literal>, <literal>w</literal>). If - <varname>RuntimeWatchdogSec=</varname> is set to a non-zero - value, the watchdog hardware - (<filename>/dev/watchdog</filename>) will be programmed to - automatically reboot the system if it is not contacted within - the specified timeout interval. The system manager will ensure - to contact it at least once in half the specified timeout - interval. This feature requires a hardware watchdog device to - be present, as it is commonly the case in embedded and server - systems. Not all hardware watchdogs allow configuration of the - reboot timeout, in which case the closest available timeout is - picked. <varname>ShutdownWatchdogSec=</varname> may be used to - configure the hardware watchdog when the system is asked to - reboot. It works as a safety net to ensure that the reboot - takes place even if a clean reboot attempt times out. By - default <varname>RuntimeWatchdogSec=</varname> defaults to 0 - (off), and <varname>ShutdownWatchdogSec=</varname> to 10min. - These settings have no effect if a hardware watchdog is not - available.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CapabilityBoundingSet=</varname></term> - - <listitem><para>Controls which capabilities to include in the - capability bounding set for PID 1 and its children. See - <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details. Takes a whitespace-separated list of capability - names as read by - <citerefentry project='mankier'><refentrytitle>cap_from_name</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - Capabilities listed will be included in the bounding set, all - others are removed. If the list of capabilities is prefixed - with ~, all but the listed capabilities will be included, the - effect of the assignment inverted. Note that this option also - affects the respective capabilities in the effective, - permitted and inheritable capability sets. The capability - bounding set may also be individually configured for units - using the <varname>CapabilityBoundingSet=</varname> directive - for units, but note that capabilities dropped for PID 1 cannot - be regained in individual units, they are lost for - good.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SystemCallArchitectures=</varname></term> - - <listitem><para>Takes a space-separated list of architecture - identifiers. Selects from which architectures system calls may - be invoked on this system. This may be used as an effective - way to disable invocation of non-native binaries system-wide, - for example to prohibit execution of 32-bit x86 binaries on - 64-bit x86-64 systems. This option operates system-wide, and - acts similar to the - <varname>SystemCallArchitectures=</varname> setting of unit - files, see - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. This setting defaults to the empty list, in which - case no filtering of system calls based on architecture is - applied. Known architecture identifiers are - <literal>x86</literal>, <literal>x86-64</literal>, - <literal>x32</literal>, <literal>arm</literal> and the special - identifier <literal>native</literal>. The latter implicitly - maps to the native architecture of the system (or more - specifically, the architecture the system manager was compiled - for). Set this setting to <literal>native</literal> to - prohibit execution of any non-native binaries. When a binary - executes a system call of an architecture that is not listed - in this setting, it will be immediately terminated with the - SIGSYS signal.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TimerSlackNSec=</varname></term> - - <listitem><para>Sets the timer slack in nanoseconds for PID 1, - which is inherited by all executed processes, unless - overridden individually, for example with the - <varname>TimerSlackNSec=</varname> setting in service units - (for details see - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - The timer slack controls the accuracy of wake-ups triggered by - system timers. See - <citerefentry><refentrytitle>prctl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for more information. Note that in contrast to most other time - span definitions this parameter takes an integer value in - nano-seconds if no unit is specified. The usual time units are - understood too.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultTimerAccuracySec=</varname></term> - - <listitem><para>Sets the default accuracy of timer units. This - controls the global default for the - <varname>AccuracySec=</varname> setting of timer units, see - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. <varname>AccuracySec=</varname> set in individual - units override the global default for the specific unit. - Defaults to 1min. Note that the accuracy of timer units is - also affected by the configured timer slack for PID 1, see - <varname>TimerSlackNSec=</varname> above.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultTimeoutStartSec=</varname></term> - <term><varname>DefaultTimeoutStopSec=</varname></term> - <term><varname>DefaultRestartSec=</varname></term> - - <listitem><para>Configures the default timeouts for starting - and stopping of units, as well as the default time to sleep - between automatic restarts of units, as configured per-unit in - <varname>TimeoutStartSec=</varname>, - <varname>TimeoutStopSec=</varname> and - <varname>RestartSec=</varname> (for services, see - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details on the per-unit settings). For non-service units, - <varname>DefaultTimeoutStartSec=</varname> sets the default - <varname>TimeoutSec=</varname> value. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultStartLimitInterval=</varname></term> - <term><varname>DefaultStartLimitBurst=</varname></term> - - <listitem><para>Configure the default unit start rate - limiting, as configured per-service by - <varname>StartLimitInterval=</varname> and - <varname>StartLimitBurst=</varname>. See - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details on the per-service settings.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultEnvironment=</varname></term> - - <listitem><para>Sets manager environment variables passed to - all executed processes. Takes a space-separated list of - variable assignments. See - <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details about environment variables.</para> - - <para>Example: - - <programlisting>DefaultEnvironment="VAR1=word1 word2" VAR2=word3 "VAR3=word 5 6"</programlisting> - - Sets three variables - <literal>VAR1</literal>, - <literal>VAR2</literal>, - <literal>VAR3</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultCPUAccounting=</varname></term> - <term><varname>DefaultBlockIOAccounting=</varname></term> - <term><varname>DefaultMemoryAccounting=</varname></term> - - <listitem><para>Configure the default resource accounting - settings, as configured per-unit by - <varname>CPUAccounting=</varname>, - <varname>BlockIOAccounting=</varname> and - <varname>MemoryAccounting=</varname>. See - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details on the per-unit settings.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultLimitCPU=</varname></term> - <term><varname>DefaultLimitFSIZE=</varname></term> - <term><varname>DefaultLimitDATA=</varname></term> - <term><varname>DefaultLimitSTACK=</varname></term> - <term><varname>DefaultLimitCORE=</varname></term> - <term><varname>DefaultLimitRSS=</varname></term> - <term><varname>DefaultLimitNOFILE=</varname></term> - <term><varname>DefaultLimitAS=</varname></term> - <term><varname>DefaultLimitNPROC=</varname></term> - <term><varname>DefaultLimitMEMLOCK=</varname></term> - <term><varname>DefaultLimitLOCKS=</varname></term> - <term><varname>DefaultLimitSIGPENDING=</varname></term> - <term><varname>DefaultLimitMSGQUEUE=</varname></term> - <term><varname>DefaultLimitNICE=</varname></term> - <term><varname>DefaultLimitRTPRIO=</varname></term> - <term><varname>DefaultLimitRTTIME=</varname></term> - - <listitem><para>These settings control various default - resource limits for units. See - <citerefentry><refentrytitle>setrlimit</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details. Use the string <varname>infinity</varname> to - configure no limit on a specific resource. These settings may - be overridden in individual units using the corresponding - LimitXXX= directives. Note that these resource limits are only - defaults for units, they are not applied to PID 1 - itself.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> |