diff options
Diffstat (limited to 'man/systemd.kill.xml')
| -rw-r--r-- | man/systemd.kill.xml | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/man/systemd.kill.xml b/man/systemd.kill.xml deleted file mode 100644 index e57f0e724..000000000 --- a/man/systemd.kill.xml +++ /dev/null @@ -1,183 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.kill"> - <refentryinfo> - <title>systemd.kill</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.kill</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.kill</refname> - <refpurpose>Process killing procedure - configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>service</replaceable>.service</filename>, - <filename><replaceable>socket</replaceable>.socket</filename>, - <filename><replaceable>mount</replaceable>.mount</filename>, - <filename><replaceable>swap</replaceable>.swap</filename>, - <filename><replaceable>scope</replaceable>.scope</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>Unit configuration files for services, sockets, mount - points, swap devices and scopes share a subset of configuration - options which define the killing procedure of processes belonging - to the unit.</para> - - <para>This man page lists the configuration options shared by - these five unit types. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options shared by all unit configuration files, and - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information on the configuration file options specific to - each unit type.</para> - - <para>The kill procedure configuration options are configured in - the [Service], [Socket], [Mount] or [Swap] section, depending on - the unit type.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <variablelist class='unit-directives'> - - <varlistentry> - <term><varname>KillMode=</varname></term> - <listitem><para>Specifies how processes of this unit shall be - killed. One of - <option>control-group</option>, - <option>process</option>, - <option>mixed</option>, - <option>none</option>.</para> - - <para>If set to <option>control-group</option>, all remaining - processes in the control group of this unit will be killed on - unit stop (for services: after the stop command is executed, - as configured with <varname>ExecStop=</varname>). If set to - <option>process</option>, only the main process itself is - killed. If set to <option>mixed</option>, the - <constant>SIGTERM</constant> signal (see below) is sent to the - main process while the subsequent <constant>SIGKILL</constant> - signal (see below) is sent to all remaining processes of the - unit's control group. If set to <option>none</option>, no - process is killed. In this case, only the stop command will be - executed on unit stop, but no process be killed otherwise. - Processes remaining alive after stop are left in their control - group and the control group continues to exist after stop - unless it is empty.</para> - - <para>Processes will first be terminated via - <constant>SIGTERM</constant> (unless the signal to send is - changed via <varname>KillSignal=</varname>). Optionally, this - is immediately followed by a <constant>SIGHUP</constant> (if - enabled with <varname>SendSIGHUP=</varname>). If then, after a - delay (configured via the <varname>TimeoutStopSec=</varname> - option), processes still remain, the termination request is - repeated with the <constant>SIGKILL</constant> signal (unless - this is disabled via the <varname>SendSIGKILL=</varname> - option). See - <citerefentry><refentrytitle>kill</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for more information.</para> - - <para>Defaults to - <option>control-group</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>KillSignal=</varname></term> - <listitem><para>Specifies which signal to use when killing a - service. This controls the signal that is sent as first step - of shutting down a unit (see above), and is usually followed - by <constant>SIGKILL</constant> (see above and below). For a - list of valid signals, see - <citerefentry project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - Defaults to <constant>SIGTERM</constant>. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SendSIGHUP=</varname></term> - <listitem><para>Specifies whether to send - <constant>SIGHUP</constant> to remaining processes immediately - after sending the signal configured with - <varname>KillSignal=</varname>. This is useful to indicate to - shells and shell-like programs that their connection has been - severed. Takes a boolean value. Defaults to "no". - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SendSIGKILL=</varname></term> - <listitem><para>Specifies whether to send - <constant>SIGKILL</constant> to remaining processes after a - timeout, if the normal shutdown procedure left processes of - the service around. Takes a boolean value. Defaults to "yes". - </para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>kill</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> |