206 files changed, 21 insertions, 14200 deletions

diff --git a/src/99-systemd.rules.in b/src/99-systemd.rules.in
deleted file mode 100644
index d306f71b6..000000000
--- a/src/99-systemd.rules.in
+++ /dev/null
@@ -1,55 +0,0 @@
-#  This file is part of systemd.
-#
-#  systemd is free software; you can redistribute it and/or modify it
-#  under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-
-ACTION=="remove", GOTO="systemd_end"
-
-SUBSYSTEM=="tty", KERNEL=="tty[0-9]|tty1[0-2]", TAG+="systemd"
-SUBSYSTEM=="tty", KERNEL=="tty[a-zA-Z]*|hvc*|xvc*|hvsi*", TAG+="systemd"
-
-KERNEL=="vport*", TAG+="systemd"
-
-SUBSYSTEM=="block", KERNEL!="ram*|loop*", TAG+="systemd"
-SUBSYSTEM=="block", KERNEL!="ram*|loop*", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", ENV{SYSTEMD_READY}="0"
-
-# Ignore encrypted devices with no identified superblock on it, since
-# we are probably still calling mke2fs or mkswap on it.
-
-SUBSYSTEM=="block", KERNEL!="ram*|loop*", ENV{DM_UUID}=="CRYPT-*", ENV{ID_PART_TABLE_TYPE}=="", ENV{ID_FS_USAGE}=="", ENV{SYSTEMD_READY}="0"
-
-# We need a hardware independent way to identify network devices. We
-# use the /sys/subsystem path for this. Current vanilla kernels don't
-# actually support that hierarchy right now, however upcoming kernels
-# will. HAL and udev internally support /sys/subsystem already, hence
-# it should be safe to use this here, too. This is mostly just an
-# identification string for systemd, so whether the path actually is
-# accessible or not does not matter as long as it is unique and in the
-# filesystem namespace.
-#
-# http://git.kernel.org/?p=linux/hotplug/udev.git;a=blob;f=libudev/libudev-enumerate.c;h=da831449dcaf5e936a14409e8e68ab12d30a98e2;hb=HEAD#l742
-
-SUBSYSTEM=="net", KERNEL!="lo", TAG+="systemd", ENV{SYSTEMD_ALIAS}="/sys/subsystem/net/devices/$name"
-SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_ALIAS}="/sys/subsystem/bluetooth/devices/%k"
-
-SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_WANTS}="bluetooth.target"
-ENV{ID_SMARTCARD_READER}=="*?", TAG+="systemd", ENV{SYSTEMD_WANTS}="smartcard.target"
-SUBSYSTEM=="sound", KERNEL=="card*", TAG+="systemd", ENV{SYSTEMD_WANTS}="sound.target"
-
-SUBSYSTEM=="printer", TAG+="systemd", ENV{SYSTEMD_WANTS}="printer.target"
-SUBSYSTEM=="usb", KERNEL=="lp*", TAG+="systemd", ENV{SYSTEMD_WANTS}="printer.target"
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", TAG+="systemd", ENV{SYSTEMD_WANTS}="printer.target"
-
-# Apply sysctl variables to network devices (and only to those) as they appear.
-
-SUBSYSTEM=="net", KERNEL!="lo", RUN+="@rootlibexecdir@/systemd-sysctl --prefix=/proc/sys/net/ipv4/conf/$name --prefix=/proc/sys/net/ipv4/neigh/$name --prefix=/proc/sys/net/ipv6/conf/$name --prefix=/proc/sys/net/ipv6/neigh/$name"
-
-# Asynchronously mount file systems implemented by these modules as
-# soon as they are loaded.
-
-SUBSYSTEM=="module", KERNEL=="fuse", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}="sys-fs-fuse-connections.mount"
-SUBSYSTEM=="module", KERNEL=="configfs", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}="sys-kernel-config.mount"
-
-LABEL="systemd_end"
diff --git a/src/udev/.gitignore b/src/udev/.gitignore
index fa3500ba9..e697a57ec 100644
--- a/src/udev/.gitignore
+++ b/src/udev/.gitignore
@@ -1,31 +1,4 @@
-*~
-*.o
-*.a
-*.lo
-*.la
-.libs
-.deps
-.dirstamp
-Makefile
-Makefile.in
-/aclocal.m4
-/autom4te.cache
-/config.h
-/config.h.in
-/config.log
-/config.status
-/config.guess
-/config.sub
-/libtool
-/ltmain.sh
-/install-sh
-/missing
-/configure
-/stamp-h1
-/depcomp
 /gtk-doc.make
-/build-aux
-/udev-test-install
 /udevd
 /udevadm
 /test-udev
@@ -38,3 +11,8 @@ Makefile.in
 /v4l_id
 /keymap
 /scsi_id
+*.[78]
+*.html
+udev.pc
+libudev.pc
+udev*.service
diff --git a/src/udev/COPYING b/src/udev/COPYING
deleted file mode 100644
index d159169d1..000000000
--- a/src/udev/COPYING
+++ /dev/null
@@ -1,339 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                            NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.
diff --git a/src/udev/ChangeLog b/src/udev/ChangeLog
deleted file mode 100644
index dd5813826..000000000
--- a/src/udev/ChangeLog
+++ /dev/null
@@ -1,6387 +0,0 @@
-Summary of changes from v181 to v182
-============================================
-
-Kay Sievers (22):
-      build-sys: unpack test sysfs only for 'make check'
-      build-sys: add --disable-manpages
-      update sd-daemon files
-      test: remove outdated key attributes
-      update TOO
-      builtin: path_id - remove dead cciss code
-      rules: do not create by-id/scsi-* links for ATA devices
-      remove udev-acl
-      udev.conf - do not set any value by default
-      move src/extras subdirectories to src/
-      rules: delete outdated 30-kernel-compat.rules
-      rules: move 42-qemu-usb.rules to rules/ dir
-      remove edd_id extra
-      build-sys: remove empty directory
-      rules: delete s390 rules, they will move to s390utils
-      update TODO
-      rules: move all rules to top level rules/ dir
-      extras: path_id - skip ATA transport class devices
-      extras: path_id - add comment about readdir() rebase logic
-      extras: ata_id - do not log error if HDIO_GET_IDENTITY fails
-      rules sort order: /lib, /run, /etc
-      build-sys: place build binaries in the root
-
-Matthew Garrett (1):
-      rules: Enable USB autosuspend on more USB HID devices
-
-
-Summary of changes from v180 to v181
-============================================
-
-Andreas Schwab (1):
-      ata_id: fix identify string fixup
-
-Bruno Redondi (1):
-      keymap: Add Fujitsu Siemens Amilo Li 2732
-
-James M. Leddy (1):
-      keymap: Fix touchpad toggle button on Lenovo Ideapad
-
-Kay Sievers (4):
-      configure: show ROOTPREFIX in firmware path option help text
-      extras: cdrom_id -  create /dev/cdrom and conditionally /dev/dvd for sr0
-      extras: cdrom_id -  create only /dev/cdrom
-      ata_id: whitespace fixes
-
-Lucas De Marchi (1):
-      builtin: kmod - depend on libkmod >= 5
-
-
-Summary of changes from v179 to v180
-============================================
-
-Kay Sievers (4):
-      Makefile: update kernel.org hooks
-      build-sys: we need to install shipped man pages without xsltproc installed
-      builtin: blkid - add missing ID_ prefix for PART_ENTRY_* keys
-      do not stop rule processing when device node is no longer around
-
-
-Summary of changes from v178 to v179
-============================================
-
-Kay Sievers (8):
-      fix some fallout from tab removal
-      use devnode() for $name not sysname(), device nodes might be in a subdirectory
-      print warning when rules try to rename kernel device nodes
-      move variable inside condition
-      update TODO
-      build-sys: enable everything for 'make distcheck'
-      use sysname() for devices without a device node
-      fix path to extras
-
-
-Summary of changes from v177 to v178
-============================================
-
-Evan Nemerson (1):
-      gudev: several minor introspection fixes
-
-Kay Sievers (7):
-      Makefile: update kernel.org doc hooks for kup
-      builtin: blkid - add missing ID_ prefix
-      udevd: kill hanging event processes after 30 seconds
-      Makefile: switch from .asc to .sign
-      rules: rtc - point /dev/rtc symlink to 'hctosys' device
-      warn about deprecated RUN+="socket:" use
-      libudev: do not set DEVNAME= twice
-
-Martin Pitt (4):
-      keymap: Fix rfkill button on Hewlett-Packard HP ProBook
-      keymap: Fix eject button on Samsung 700Z series
-      keymap: Fix keyboard brightness keys on Samsung 700Z series
-      keymap: Add Alienware M14xR1
-
-
-Summary of changes from v176 to v177
-============================================
-
-Kay Sievers (3):
-      Makefile: update kernel.org sign and upload hook
-      rule_generator: fix to install rules in rules.d/
-      rule_generator: use += for dist_udevhome_DATA
-
-
-Summary of changes from v175 to v176
-============================================
-
-Alan Stern (1):
-      [PATCH[ udev: ata_id: Fix length of INQUIRY command
-
-Kay Sievers (61):
-      libudev: print log_fn address instead of ctx when setting logging function
-      do not ship autogen.sh in the tarball
-      man: clarify 'config file stack'
-      rename 'init' directory to 'systemd'
-      systemd: use PassCred=yes
-      use libexecdir, bindir, sbindir, switch to /usr/lib/udev in documentation
-      configure: fix typo
-      make: do not (mis-)use the config file generator, create .xz tarball
-      prepare builtins for blkid and kmod
-      add builtin load/unload initializers
-      build argv[] for builtin commands
-      update blkid builtin
-      rules: switch to built-in blkid
-      rules: do not preprocess 60-persistent-storage.rules
-      buildsys: disable tar.gz
-      builtin: blkid - add missing newline
-      builtin: blkid - add missing ID_FS_USAGE
-      builtin: kmod - switch modprobe to builtin
-      rules: do not preprocess 80-drivers.rules + 75-probe_mtd.rules
-      builtin: apply format string
-      remove last sbindir use
-      update NEWS
-      autogen.sh: moce CFLAGS from to configure.ac; print common ./configure options
-      builtin: kmod - link against libkmod
-      add copyright
-      builtin: kmod - reload index when rules are reloaded
-      builtin: rename load()/unload() to init()/exit()
-      invalidate rules and kmod index with 'udevadm control --reload'
-      update NEWS
-      builtin: firmware - move 'firmware' tool to builtins
-      builtin: firmware - add missing file
-      builtin: kmod - hook up udev main logging to libkmod
-      make: introduce --with-rootprefix=
-      update NEWS
-      move rules dirs to udev context; replace inotify with time-controlled stat()
-      udevd: always create runtime dir
-      builtin: move usb-db, pci-db to builtins
-      builtin: kmod - switch to kmod_module_probe_insert_module()
-      udevd: remove TIMEOUT= handling
-      update README
-      systemd: rename PassCred= to PsssCredentials=
-      remove mknod() logic and rely on 'devtmpfs'
-      builtin: kmod - hook up kmod_validate_resources()
-      build-sys: use use ${ac_default_prefix}
-      require kmod >= 3
-      build-sys: use --libexecdir=/usr/lib instead of /usr/lib/udev
-      autogen.sh: enable git pre-commit
-      merge udev/, libudev/, systemd/ files in src/; move extras/ to src/
-      replace unpacked sysfs test tree 'test/sys/' with packed tarball
-      rules: delete arch specific rules
-      doc: fix out of tree build (copy from libkmod)
-      autogen.sh: add CFLAGS and print entire line, so that mouse copy/paste works
-      build-sys: try to build without installed xsltproc
-      add test/src to .gitignore
-      tabs are as useful as a hole in the head
-      autogen.sh: makedev() misteriously breaks with -O0 here, use -O1 for now
-      fix debug message
-      add .vimrc
-      cdrom_id: int -> bool
-      fix compiler warning
-      man: mention that no daemons should be started by udev
-
-Lucas De Marchi (1):
-      builtin: kmod - log if modules are blacklisted
-
-Luis Felipe Strano Moraes (1):
-      Switch spawn_read to void and remove useless stores there.
-
-Martin Pitt (1):
-      75-persistent-net-generator.rules: Add Xen
-
-Mike Frysinger (1):
-      hwdb: drop useless line freeing
-
-Sjoerd Simons (1):
-      keymap: Add Lenovo Thinkpad X220 Tablet
-
-Ville Skyttä (1):
-      man: spelling fix
-
-
-Summary of changes from v174 to v175
-============================================
-
-David Zeuthen (2):
-      gudev: Use strtoul to parse unsigned 64-bit integers
-      gudev: Use g_ascii_strtoull() instead of strtoul()
-
-Harald Hoyer (1):
-      extras/keymap/findkeyboards: beautify shell code and get rid of grep
-
-Jerone Young (1):
-      keymap: Fix micmute remap for Lenovo Thinkpads
-
-Kay Sievers (7):
-      make: add gpg signing bits
-      ignore entire rules line if unknown keys are used
-      do not skip /dev/{disk,char}/M:m removal when the device node is already gone
-      replace AC_DISABLE_STATIC with LT_INIT([disable-static])
-      make: tweak some autofoo according to Flameeyes' recommendations for libabc
-      rules: restore rule to set cdrom group for optical drives
-      rules: fix typo
-
-Martin Pitt (8):
-      check-keymaps.sh: Allow running separately
-      extras/keymap/findkeyboards: Filter out non-event devices
-      findkeyboards: Consistently use spaces instead of tabs
-      keymap: Fix stuck keys on GIGABYTE i1520M
-      keymap: More Asus module variants
-      keymap: Fix "internet" key on HP G62
-      keymap: Fix bluetooth key on Acer TravelMate 7720
-      keymap: Fix stuck keys on BenQ nScreen
-
-
-Summary of changes from v173 to v174
-============================================
-
-David Zeuthen (1):
-      ata_id: Check for Compact Flash card
-
-Jerone Young (1):
-      Add mic mute keycode support for Lenovo Thinkpad USB keyboard
-
-Kay Sievers (34):
-      gtk-doc: delete empty files
-      libudev: list - use binary search for list lookup
-      rules: move input_id to default rules
-      implement path_id, usb_id, input_id as built-in command
-      do not remove static nodes on module unload
-      rules: remove legacy rules for cdrom and usb printer
-      update TODO
-      preserve 'sticky bit' on 'add/change' events
-      libudev: util_get_sys_(subsystem,driver}() -> util_get_sys_core_link_value()
-      export USEC_INITIALIZED= and take timestamp on message receive time
-      libudev: udev_device_get_sysattr_value() return syspath of custom links
-      libudev: list - properly sort linked list not only the index
-      mknod: do not complain about existing node
-      update README
-      libudev: fix typo in documentation
-      rules: fuse: do not mount fusectl from udev rules
-      keymap: add genius keymap to Makefile
-      update NEWS
-      usb_id: can't use global variables when used as built-in
-      remove 'udevadm trigger --type=failed' and SYSFS, ID, BUS keys
-      libudev: export udev_util_encode_string()
-      update TODO
-      systemd: no not start udev in a container
-      systemd: no not start udev in a container
-      delete left-over files in extras/
-      systemd: update drop-in sd-daemon files
-      udevadm: control - use /run/udev/control socket instead of abstract namespace one
-      udevd: control - no not delete socket file when --daemon is used
-      udev_ctrl_cleanup()- accept NULL as argument
-      update NEWS
-      udevd: install into /lib/udev instead of /sbin
-      udevd: add missing braces
-      systemd: use ConditionCapability=CAP_MKNOD instead of ConditionVirtualization=!container
-      rules: do not load sg module
-
-Kir Kolyshkin (1):
-      keymap: add Genius SlimStar 320
-
-Martin Pitt (1):
-      keymap: Update Acer Aspire 5920g
-
-Matthias Clasen (1):
-      make: allow to pass ${ACLOCAL_FLAGS}
-
-Paul Fox (1):
-      keymap: update the OLPC keymap for correct function key behavior
-
-Petr Uzel (1):
-      udevadm: settle - return failure if unknown option is given
-
-Steve Langasek (1):
-      udevd: exit - process events before signals in worker
-
-Thomas Hood (2):
-      keymap: Support keymap overrides in /etc/udev/keymaps
-      keymap: Support for microphone mute button on ThinkPad X220 et al
-
-
-Summary of changes from v172 to v173
-============================================
-
-Allin Cottrell (1):
-      configure: allow to disable mtd_probe
-
-Kay Sievers (15):
-      make: fix 'make tar-sync'
-      udevd: use 'uptime' in debug timestamp
-      udevd: fix (recently) broken static node permission setting
-      rules: mount fuse filesystem only 'add'
-      udevadm: move udevadm command descriptions into their files
-      udev-acl: skip ACLs when systemd is running, disable by default
-      do not delete database when renaming netif, the db name does not change anymore
-      do not allow kernel properties to be set by udev rules
-      configure: reorder options
-      rules: input - do not create (broken) links for bluetooth devices
-      rules: serial - do not export ID_PORT, use ID_USB_INTERFACE_NUM
-      rules: sound - instead of ID_IFACE use standard ID_USB_INTERFACE_NUM
-      keymap: do not run usb_id for bluetooth devices
-      udevadm: trigger --type=failed - log deprecation warning
-      udevd: debug - put timestamp in []
-
-Martin Pitt (4):
-      gudev: Ship JavaScript examples
-      scsi_id: Ship README
-      Remove obsolete extras/scsi_id/scsi_id.config
-      keymap: Only run on key devices
-
-
-Summary of changes from v171 to v172
-============================================
-
-Bastien Nocera (3):
-      accelerometer: add orientation property
-      udev-acl: fix memleak
-      accelerometer: add documentation
-
-Harald Hoyer (2):
-      udevadm-*.c: return != 0, if unknown option given
-      udev/udevadm-monitor.c: fixed misplaced brace
-
-Kay Sievers (33):
-      rules: apply 'audio' group of the static snd/{seq,timer} nodes
-      Makefile: add tar-sync
-      rules: static_node - use 0660 if group is given to get the cigar
-      rule-syntax-check.py: use print()
-      make: use 'git tag'
-      rules: run input_id for main input devices too
-      update TODO
-      configure: add AC_CONFIG_AUX_DIR, AC_CONFIG_SRCDIR
-      cdrom_id: add tray lock and eject handling
-      rules: enable in-kernel media-presence polling
-      update TODO
-      delete mobile-action-modeswitch which has moved to usb_modeswitch
-      libudev: enumerate - scan /sys/module
-      rules: move polling rule above 'block' match
-      libudev: monitor - update doc
-      rules: set polling value only if it is disabled
-      libudev: device - fix udev_device_get_tags_list_entry() to always load database
-      rules: remove redundant MODE="0664" from lp rules
-      rules: fix wrong wildcard match, we always need a ':*' at the end
-      libudev: device - export udev_device_has_tag()
-      path_id: add missing '-' to tape suffix
-      path_id: add ID_PATH_TAG= to be used in udev tags
-      enforce valid TAG+= names
-      update TODO
-      libudev: device - add udev_device_has_tag() to libudev.h and gtk-doc
-      libudev: enumerate - add udev_enumerate_add_match_parent()
-      libudev: enumerate - include parent device itself with match_parent()
-      libudev: enumerate - clarify documentation
-      path_id: recognize ACPI parent devices
-      rules: input - call path_id for ACPI devices
-      udevadm: monitor - use uptime to match the kernel's timestamp
-      libudev: ctrl - move code to udev directory
-      update sd-daemon.[ch]
-
-Keshav P.R (1):
-      rules: support for gpt partition uuid/label
-
-Lee, Chun-Yi (1):
-      Support more MSI notebook by using asterisk on dmi vendor name
-
-Marco d'Itri (1):
-      Add missing commas to 95-keymap.rules
-
-Martin Pitt (3):
-      keymap: Add Microsoft Natural Keyboard
-      keymap: Add force-release quirk for Hannspree SN10.
-      keymap: Add slight name variations of Toshiba Satellites
-
-Peter Jones (1):
-      ata_id: show the error message when HDIO_GET_IDENTITY fails
-
-
-Summary of changes from v170 to v171
-============================================
-
-Kay Sievers (17):
-      libudev: export symbols explicitely and individually from C code not from separate file or prefix match
-      libudev: device - make a bunch of symbols static
-      systemd: Replace Requires= with Wants=, run trigger in parallel
-      systemd: sort trigger after socket
-      systemd: trigger - run after udev.service (for now)
-      systemd: set socket buffer size to 128 MB like udev has
-      update TODO
-      update TODO
-      libudev: monitor - use SOCK_NONBLOCK
-      systemd: split socket file
-      systemd: add missing socket files
-      rules: fix whitespace
-      rules: implement TAGS== match
-      libudev: enumerate - do not ignore other matches when add_match_tag() is used
-      rules: support substitutions in TAG=
-      path_id: allow to be asked about usb_devices not only usb_interfaces
-      systemd: run udev.service and udev-trigger.service in parallel
-
-Scott James Remnant (1):
-      configure: allow usb.ids location to be specified
-
-
-Summary of changes from v169 to v170
-============================================
-
-Kay Sievers (1):
-      libudev: ctrl - properly wait for incoming message after connect
-
-Michal Soltys (1):
-      configure.ac: fixes for rule_generator and modeswitch
-
-
-Summary of changes from v168 to v169
-============================================
-
-Kay Sievers (26):
-      simplify rules file overwrite logic
-      libudev: list - use bit flags for 'sort' and 'unique'
-      libudev: queue - _unref() should return the object
-      remove dead fstab_import files
-      hid2hci: prepare move to bluez package
-      set event timeout to 60 sec and settle timeout to 120
-      udevd: improve error message in case exec() fails
-      configure: allow to enable/disable extras individually
-      delete hid2hci which moved to the bluez tree
-      update TODO/NEWS
-      bump requirement to Linux kernel 2.6.32 and ARM 2.6.36
-      libudev: ctrl - log accept4() errors
-      update NEWS
-      update INSTALL, NEWS, configure comment, queue doc
-      update TODO
-      udevd: create queue file before daemonizing to reliably block 'settle'
-      udevd: remove left-over SIGALRM
-      gudev: silent gtk-doc warnings
-      cdrom_id: remove unused --export switch to silent gcc
-      libudev: queue - always rebuild queue file when nothing is queued anymore
-      libudev: device - use DEVMODE from kernel as the default mode
-      update TODO
-      Merge branch 'docs/udev.xml' of git://github.com/mfwitten/udev
-      udate TODO, NEWS, INSTALL
-      build: use --gc-sections, -fvisibility=hidden
-      udevadm: settle: wake up more often if --seq-start= or --exit-if-exists= is used
-
-Koen Kooi (1):
-      configure: reintroduce introspection flags to fix crosscompilation
-
-Michael Witten (36):
-      Docs: udev.xml: Offset daemon name with commas
-      Docs: udev.xml: Remove commas (and unnecessary repetition)
-      Docs: udev.xml: `are' -> `is'; the subject is `Access'
-      Docs: udev.xml: Use present tense
-      Docs: udev.xml: Clarification through proper wording
-      Docs: udev.xml: `,' -> `;'
-      Docs: udev.xml: `key value' -> `key-value'
-      Docs: udev.xml: `,' -> `:'
-      Docs: udev.xml: Use `assignment' consistently
-      Docs: udev.xml: `comma-separated' is a better description
-      Docs: udev.xml: Remove unnecessary repitition
-      Docs: udev.xml: Add a few more words for context
-      Docs: udev.xml: Use `unless' for clarity
-      Docs: udev.xml: Clarify PROGRAM key
-      Docs: udev.xml: `a shell style' -> `shell-style'
-      Docs: udev.xml: Clean `*' description
-      Docs: udev.xml: Clean character range description
-      Docs: udev.xml: Clean up description of NAME assignment key
-      Docs: udev.xml: Clean up description of SYMLINK assignment key
-      Docs: udev.xml: Clean up description of ENV assignment key
-      Docs: udev.xml: Clean up description of RUN assignment key
-      Docs: udev.xml: Clean up description of LABEL assignment key
-      Docs: udev.xml: Add missing `.'
-      Docs: udev.xml: `which' -> `content of which'
-      Docs: udev.xml: `commandline' -> `command line'
-      Docs: udev.xml: Clean up WAIT_FOR description
-      Docs: udev.xml: `a' -> `the'
-      Docs: udev.xml: Clean up introduction to substitutions.
-      Docs: udev.xml: Use normal sentence structure
-      Docs: udev.xml: Actually make a separate paragraph
-      Docs: udev.xml: Add comma
-      Docs: udev.xml: `char' -> `character'
-      Docs: udev.xml: `comma-separated' is a better description
-      Docs: udev.xml: Clarify through a change in word ordering
-      Docs: udev.xml: Improved word order
-      Docs: udev.xml: Fix dangling modifier
-
-Nix (1):
-      libudev: queue - accept NULL passed into udev_queue_export_cleanup()
-
-
-Summary of changes from v167 to v168
-============================================
-
-David Zeuthen (1):
-      Run ata_id on non-removable USB devices
-
-Harald Hoyer (1):
-      udevd: clarify worker exit status
-
-Kay Sievers (35):
-      version bump
-      systemd: let settle depend on trigger, do not block basic with trigger
-      selinux: do not label files in runtime dir
-      selinux: firmware - do not label files in runtime dir
-      udevadm: control - add --exit
-      trivial cleanups
-      udevd: log warning if /run is not writable
-      libudev: ctrl - fix refcounting in connection handling
-      udevadm: settle - watch queue file
-      libudev: bump revision
-      udevadm: info --cleanup-db
-      udevd: do not nice processes
-      "db_persist=" -> "db_persist"
-      udevd: move OOM disable into --daemon option
-      systemd: add OOMScoreAdjust=-1000
-      require explicit "db_persist" to exclude device info from --db-cleanup
-      udevd: get netlink socket from systemd
-      fix more warnings
-      libudev: ctrl, monitor - use SOCK_NONBLOCK
-      systemd: socket -> sockets
-      udevadm: monitor - use epoll
-      libudev: test - use epoll
-      udevadm:  test - use printf() instead of info() for non-debug output
-      use 'else if' in epoll event array loop
-      libudev: run_program() - select() -> epoll
-      udevd: ppoll() -> epoll + signalfd
-      Merge branch 'docs/README' of git://github.com/mfwitten/udev
-      timeout handling without alarm()
-      udevadm: settle - kill alarm()
-      udevd: netif rename - use ifindex for temporary name
-      udevd: always use udevd[] log prefix
-      udevd: rules files - accept empty or /dev/null links
-      udevd: log signal number when spawned processes fail
-      systemd: Reqires= -> Wants=udev.socket
-      udevd, udev-event: sync waitpid() error handling
-
-Lee, Chun-Yi (1):
-      Add rule for Acer Aspire One ZG8 to use acer-aspire_5720 keymap
-
-Leonid Antonenkov (1):
-      rule-generator: net - ignore Hyper-V virtual interfaces
-
-Martin Pitt (3):
-      Revert "Do not build extras with --disable-extras"
-      Avoid spinning up CD on pressing eject button
-      keymap: Another ID for Logitech Wave keyboard
-
-Michael Reed (1):
-      path_id: rework SAS device handling
-
-Michael Witten (12):
-      Docs: README: `to replace' -> `replacing'
-      Docs: README: `,' -> `;'
-      Docs: README: Clean up a sentence
-      Docs: README: Use present tense
-      Docs: README: Add missing `and'
-      Docs: README: Remove commas and use subjective mood
-      Docs: README: Clean up `udev extras' requirements
-      Docs: README: Clarify configuration of existing devices
-      Docs: README: `does never apply' -> `never applies'
-      Docs: README: Flip sentence structure to improve wording
-      Docs: README: `set up' is the verb; `setup' is a noun
-      Docs: README: Add a comma to offset the modifier
-
-Seth Forshee (1):
-      keymap: Support Dell Latitude XT2 tablet-mode navigation keys
-
-Thomas Egerer (1):
-      udevd: add 'N:' to optstring in getopt_long
-
-
-Summary of changes from v166 to v167
-============================================
-
-Andrey Borzenkov (1):
-      udev-acl: add /dev/sgX nodes for CD-ROM
-
-David Zeuthen (1):
-      cdrom_id: Don't ignore profiles when there is no media available
-
-Harald Hoyer (2):
-      cdrom_id: cd_media_toc() extend toc size to 65536
-      udev-acl/70-acl.rules: tag ID_REMOTE_CONTROL with acl
-
-Kay Sievers (29):
-      version bump
-      Merge branch 'master' of git+ssh://master.kernel.org/pub/scm/linux/hotplug/udev
-      v4l_id: kill the v4l1 ioctl
-      v4l_id: remove left-over variable
-      update some comments
-      test-libudev: add short options
-      libudev: udev_device_get_sysattr_list_entry() update
-      libudev: resolve ifindex in udev_device_new_from_id_filename()
-      libudev: bump minor version
-      udev-acl: move sg rule to optical drive rule
-      move /dev/.udev/ to /dev/.run/udev/ and convert old udev database at udevd startup
-      NEWS: clarify /dev/.run/ requirements
-      input_id: silent gcc warnings
-      fstab_import: disable build
-      systemd: remove deprecated udev-retry.service
-      fstab_import: remove from configure
-      update sd-daemon.[ch]
-      udevd: use facility == LOG_DAEMON when writing to /dev/kmsg
-      udevd: initialize fds, for proper close() on exit
-      use /run/udev/ if possible and fall back to /dev/.udev/
-      rules: run ata_id only on SPC-3 or later optical drives
-      systemd: bind udev control socket in systemd and split udev.service
-      systemd: use sockets.target not socket.target
-      man: remove trigger --type=failed handling
-      libudev: export udev_get_run_path()
-      libudev: docs - add udev_get_run_path()
-      libudev: make valgrind happy
-      systemd: do not enable udev-settle.service by default
-      systemd: udev.socket - disable implicit dependencies
-
-Kei Tokunaga (1):
-      udevadm: enumerate - update prev pointer properly
-
-Lee, Chun-Yi (2):
-      Remap Acer WMI touchpad toggle key to F21 used by X
-      Remap MSI Laptop touchpad on/off key to F22 and F23
-
-Martin Pitt (12):
-      60-persistent-input.rules: Support multiple interfaces
-      Only build v4l_id if V4L1 header file is available
-      60-persistent-input.rules: Do not create duplicate links
-      Fix building with --disable-extras
-      Do not build extras with --disable-extras
-      v4l_id: Drop videodev.h check again
-      keymap: Fix Acer Aspire 5920G media key
-      input_id: Consistently use tabs for indentation
-      input_id: Add some debugging output
-      input_id: Avoid memory overflow with too long capability masks
-      input_id: Cover key devices which only have KEY_* > 255
-      input_id: Rewrite debug logging to use standard udev info()
-
-Seth Forshee (1):
-      keymap: continue reading keymap after invalid scancodes
-
-Thomas Egerer (3):
-      libudev: allow to get list of all available sysfs attrs for a device
-      libudev: use sysfs attr ilist interface for attribute walk
-      udevadm: info - make attribute array static and const
-
-
-Summary of changes from v165 to v166
-============================================
-
-Chris Bagwell (1):
-      Remap Eee PC touchpad toggle key to F21 used by X
-
-Gerd Hoffmann (1):
-      extras: add rules for qemu guests
-
-Jürgen Kaiser (1):
-      keymap: Add Acer Aspire 8930
-
-Kay Sievers (7):
-      version bump
-      man: generate html pages for www.kernel.org
-      man: fix typo
-      make: fix qemu rules file name
-      extras: qemu - fix typo
-      ata_id: do not print empty serial numbers to avoid unwanted trailing '_'
-      update gitignore
-
-Martin Pitt (6):
-      keymap: Add Acer TravelMate C310
-      keymap: Update README.keymap.txt
-      keymap: Add Lenovo ThinkPad X201 tablet
-      keymap: Move reading of event in separate function
-      keymap: More robust state machine
-      keymap: Explain how to end the program
-
-Matthew Garrett (1):
-      keymap: Remove wlan from Dell
-
-
-Summary of changes from v164 to v165
-============================================
-
-Andy Whitcroft (1):
-      keymap: Add release quirks for two Zepto Znote models and AMILO Xi 2428
-
-Bastien Nocera (2):
-      keymap: Add force release for HP touchpad off
-      extras/keymap: Make touchpad buttons consistent
-
-David Henningsson (1):
-      Add ACLs for FFADO supported sound cards
-
-David Zeuthen (6):
-      ata_id: Support SG_IO version 4 interface
-      Run scsi_id and ata_id on the scsi_device object
-      Use ata_id, not scsi_id, on ATAPI devices
-      Add GUdevEnumerator type and Device.get_tags() method
-      Add g_udev_device_get_is_initialized() method
-      gudev: Add Device.get_usec_since_initialized
-
-Harald Hoyer (2):
-      udev-rules.c: change import property buffer to 16384 bytes
-      70-acl.rules: add ACLs for ID_PDA devices
-
-Jakub Wilk (1):
-      man: udev - workaraound -> workaround
-
-Jan Drzewiecki (1):
-      cdrom_id: Fix media state for unreadable DVDs
-
-Kay Sievers (19):
-      version bump
-      rules: 78-sound-card - remove specific hardware matches, they do not belong here
-      rules: drop OSS audio rule
-      rules: drop alsa jack-plug input devices
-      rules: revert bsg use until the event ordering problem is sorted out
-      libudev: do not overwrite path with readlink() call
-      udevadm: info - honor --export and --export-prefix for property query
-      udevadm: info - honor --export, --export-prefix=
-      udevd: use dev_t or netif ifindex as database key
-      udevd: always create /dev/{char,block}/$major:$minor
-      udevd: simplify udev database and fix DEVNAME handling
-      udevd: switch to common id_filename functions
-      udevd: write full database file for (unsupported) renamed device nodes
-      check ifindex > 0 instead of subsystem == "net"
-      libudev: enumerate - allow to filter-out not-already-initialized devices
-      libudev: fix renamed device nodes detection logic
-      libudev: record and export "age" of device record
-      gudev: bump minor version
-      update NEWS
-
-Martin Pitt (5):
-      keymap: Add Sony Vaio VGN71
-      keymap: Add some more Sony Vaio VGN-* models
-      Add ACL for media player USB devices
-      keymap: Fix struck Touchpad key on Dell Latitude E series
-      keymap: Fix struck Touchpad key on Dell Precision M series
-
-Michal Soltys (1):
-      udevd: create static nodes before /dev/null is needed
-
-
-Summary of changes from v163 to v164
-============================================
-
-David Zeuthen (1):
-      Install libgudev-1.0.so in prefix / instead of prefix /usr
-
-Harald Hoyer (1):
-      cdrom_id: request the drive profile features with a dynamic length
-
-Kay Sievers (4):
-      version bump
-      udevd: do not wrongly delay events for devices with swapped names
-      return proper error code in rename_netif()
-      libudev: return kernel provided devnode when asked before we handled any rules
-
-Martin Pitt (2):
-      keymap: Apply force-release rules to all Samsung models.
-      keymap: Add Toshiba Satellite U500
-
-
-Summary of changes from v162 to v163
-============================================
-
-David Zeuthen (2):
-      gudev: Deliver ::uevent signal in the thread-default main loop
-      Bump required GLib version to 2.22
-
-Hannes Reinecke (1):
-      scsi_id: export target port group
-
-Kay Sievers (5):
-      version bump
-      scsi_id: fix compiler warnings
-      systemd: hook into basic.target instead of sysinit.target
-      systemd: sort before basic.target
-      udevd: add sd-daemon.c
-
-Lee, Chun-Yi (1):
-      keymap: Add alternate MSI vendor name
-
-Martin Pitt (8):
-      keymap: Add Lenovo Y550
-      Clarify WAIT_FOR documentation
-      fix various syntax errors in rules
-      Add automatic rules syntax check
-      cdrom_id: Try reading the medium if all MMC commands fail
-      Revert "cdrom_id: Try reading the medium if all MMC commands fail"
-      cdrom_id: Fall back to CDROM_DRIVE_STATUS if all MMC commands fail
-      cdrom_id: Don't read beyond "last track" in TOC
-
-Torsten Schoenfeld (1):
-      gudev: add a few annotations that newer gobject-introspection versions demand
-
-
-Summary of changes from v161 to v162
-============================================
-
-David Woodhouse (1):
-      Add keymap for Lenovo IdeaPad S10-3
-
-Jan Drzewiecki (2):
-      cdrom_id: Drop MEDIA_SESSION_NEXT for DVD-RW-RO
-      cdrom_id: Fix DVD blank detection for sloppy firmware
-
-Kay Sievers (10):
-      init: update systemd service files
-      init: update systemd service files
-      init: add 'udev -' to description in systemd service files
-      udevd: add pid to kmsg logs
-      init: edit systemd service descriptions
-      version bump
-      udevd: remove unneeded credential passing from init_notify()
-      set SELinux context on 'add' but not on 'change' events
-      systemd: enable all udev services unconditionally
-      Revert "Add alternative KVM MAC address blacklist"
-
-Luca Tettamanti (1):
-      Add support for oom_score_adj
-
-Marco d'Itri (2):
-      udev-acl: do not mistake all SCSI "processor" devices for scanner
-      do not create persistent name rules for KVM network interfaces
-
-Martin Pitt (12):
-      cdrom_id: Add media status debugging
-      udev(7): Point out required extension, and remove some confusion
-      keymap: Add Onkyo PC
-      keymap: Add HP G60
-      keymap: Fix Sony VAIO VGN-SZ2HP/B
-      udev(7) manpage: Fix description of $attr
-      gudev: fix crash if netlink is not available
-      keymap: Fix Acer TravelMate 4720
-      cdrom_id: Fix DVD-RW media detection
-      Fix KVM MAC address range
-      do not create persistent name rules for VMWare network interfaces
-      Add alternative KVM MAC address blacklist
-
-Michael Forney (1):
-      Don't install systemd scripts with --without-systemdsystemunitdir
-
-Michal Soltys (1):
-      ChangeLog fix
-
-
-Summary of changes from v160 to v161
-============================================
-
-Fortunato Ventre (1):
-      keymap: Add force-release quirks for a lot more Samsung models
-
-Harald Hoyer (3):
-      udev-event.c: rename interface to <src>-<dest>, if <dest> taken
-      rule_generator/write_net_rules: prevent interface to be named "eth"
-      cdrom_id: READ TOC before READ DISC INFORMATION fixes qemu
-
-Jan Drzewiecki (5):
-      cdrom_id: Fix detection of reblanked DVD+RW and DVD-RAM
-      cdrom_id: Handle pre-MMC2 drives
-      cdrom_id: Also apply format check to DVD-RW
-      cdrom_id: No "next session" for "other" media state
-      cdrom_id: Fix state for fresh DVD-RW
-
-Jerone Young (1):
-      Fix volume keys not releasing on Mivvy G310
-
-Kay Sievers (12):
-      version bump
-      rules: remove firewire rules for deprecated drivers
-      udev-acl: update firewire matches to recent rule changes
-      libudev: bump minor so version after adding symbols
-      call util_delete_path() only when we actually deleted stuff
-      udev-acl: properly handle CK change events for root user
-      udev-acl: remove specific device matches from the rules file
-      fix broken "compile warning fix"
-      always log error when renaming a network interface fails
-      do not rename the database on device rename
-      cdrom_id: whitespace fix
-      cdrom_id: do not bail out when we can not read the TOC like for empty CDRW
-
-Marco d'Itri (3):
-      hid2hci: fix Logitech diNovo, MX5500 and other keyboards
-      log an error when a message from the wrong version of udevadm is ignored
-      hid2hci: fix for Logitech diNovo Edge keyboard
-
-Martin Pitt (1):
-      keymap: Generalize Samsung keymaps
-
-Michal Schmidt (1):
-      udev-acl: really fix ACL assignment in CK events
-
-Richard Hughes (1):
-      udev-acl: add DDC_DEVICE to the types that are managed
-
-Stefan Richter (1):
-      rules: add more FireWire IDs: Point Grey IIDC; AV/C + vendor unique
-
-Yin Kangkai (7):
-      udevadm: fix short options in getopt()
-      udevd: fix some memory leaks in error path
-      malloc()+memset() -> calloc()
-      udevd: fix short options in getopt()
-      udevd: fix unref'ing of device in error path
-      udevd: create static device links only when the target exists
-      udev: fix compile warning
-
-
-Summary of changes from v159 to v160
-============================================
-
-Harald Hoyer (2):
-      60-persistent-storage-tape: s/path_id.sh/path_id/
-      60-persistent-storage-tape.rules: make own by-path symlink for nst tapes
-
-Kay Sievers (4):
-      version bump
-      rules: tape - remove WAIT_FOR instruction and don't export BSG_DEV
-      allow final assignment for OPTIONS:="nowatch"
-      udevd: init_notify() fix abstract namespace name handling
-
-Lennart Poettering (1):
-      systemd: make service files readable by GKeyFile
-
-Martin Pitt (2):
-      keymap: Find alternate Lenovo module
-      keymap: Add Lenovo ThinkPad SL Series extra buttons
-
-
-Summary of changes from v158 to v159
-============================================
-
-Jerone Young (1):
-      Fix stuck volume key presses for Toshiba Satellite U300 & U305models
-
-Kay Sievers (5):
-      version bump
-      add systemd service files
-      make: pre-process and install systemd service files when needed
-      make: fix 'make distcheck'
-      switch a few left-over from GPLv2 to GPLv2 or later
-
-Lennart Poettering (1):
-      systemd: update service files for newly introduced DefaultDependencies= option
-
-Martin Pitt (1):
-      keymap: Add Logitech Cordless Wave Pro
-
-Matthew Garrett (1):
-      keymap: Add support for IBM-branded USB devices
-
-Michael Meeks (1):
-      gudev: respect possibly given LD_LIBRARY_PATH
-
-Ryan Harper (2):
-      Add virtio-blk support to path_id
-      Add virtio-blk by-id rules based on 'serial' attribute
-
-
-Summary of changes from v157 to v158
-============================================
-
-Harald Hoyer (1):
-      extras/keymap: add Samsung N210 to keymap rules
-
-Kay Sievers (7):
-      version bump
-      libudev: fix fd leak in udev_enumerate_scan_devices() when tags are searched
-      udevd: in case we don't daemonize, send READY message to /sbin/init
-      delete last distro specific rules
-      remove a few comments in file headers
-      mtd_probe: add needed include, modprobe blacklist flag, and change some whitespace
-      rules: remove unused subdir
-
-Martin Pitt (4):
-      Fix hid2hci rules harder
-      add Vala vapi for gudev-1.0
-      Revert "add Vala vapi for gudev-1.0"
-      Fix usb printer rule for multiple USB interfaces
-
-Maxim Levitsky (1):
-      mtd_probe: add autodetection for xD cards
-
-Paul Bender (1):
-      configure.ac: fix cross compilation
-
-
-Summary of changes from v156 to v157
-============================================
-
-Harald Hoyer (1):
-      40-redhat.rules: removed file
-
-Jerone Young (3):
-      Fix wlan key on Inspirion 1210
-      Fix wlan key on Inspiron 910
-      Fix wlan key on Inspiron 1010 & 1110
-
-Kay Sievers (25):
-      configure.ac: version bump
-      Makefile.am: silent build mkdir
-      rules: mount fuse control filesystem
-      fix compilation with --enable-debug
-      while (1) -> for (;;)
-      childs -> children
-      udevd: replace --debug-trace with --children-max
-      udevd: fix comments
-      rules: add -v to modprobe calls to be able see what will be loaded
-      udevd:  read debug settings from kernel commandline
-      update NEWS
-      rules: delete pilot rules and remove redhat directory
-      man: add static device nodes and udevd debug options
-      man: add kernel command line parameters
-      man: udevd - update intro
-      rules: rename packages -> arch
-      rules: SUSE - move last distro rule to package
-      rules: add misc/30-kernel-compat.rules
-      make: mkdir /lib/udev/devices/
-      make: fix rules/ subdir names
-      udevd: set umask before creating files/directories
-      add IMPORT{cmdline}
-      IMPORT{cmdline}: start at first char after '='
-      libudev: doc - fix typo
-      update NEWS
-
-
-Summary of changes from v155 to v156
-============================================
-
-Bryan Kadzban (1):
-      udevd: fix typo /proc/fd -> /proc/self/fd
-
-Kay Sievers (4):
-      configure.ac: version bump
-      cdrom_id: do not export ID_CDROM_MEDIA_SESSION_LAST_OFFSET= for single session media
-      rules: optical drives - use ID_CDROM_MEDIA_TRACK_COUNT_DATA
-      libudev: fix udev_queue_get_seqnum_sequence_is_finished() with empty queue file
-
-
-Summary of changes from v154 to v155
-============================================
-
-Kay Sievers (11):
-      reset process priority before executing RUN+=
-      configure.ac: version bump
-      rules: SUSE - delete device-mapper rules
-      libudev: add O_CLOEXEC
-      use default mode of 0600 for nodes if gid == 0
-      udevd: create standard symlinks and handle /lib/udev/devices
-      update NEWS README
-      fix tests and allow MODE=000
-      create static nodes provided by kernel modules to allow module autoloading
-      update NEWS
-      man: directly use 'refentry'
-
-
-Summary of changes from v153 to v154
-============================================
-
-Harald Hoyer (2):
-      Makefile.am: add LGPL COPYING file to EXTRA_DIST
-      cdrom_id: only mark sr[0-9]* as ID_CDROM
-
-Jerone Young (1):
-      Fix volume keys not releasing for Pegatron platform
-
-Kay Sievers (23):
-      configure.ac: version bump
-      more readlink buffer size handling
-      remove left-over from ignore_remove and all_partitions
-      fix previous commit
-      udevadm: info --export-db -- remove watch handle export
-      add TAG= to improve event filtering and device enumeration
-      all to match against a given TAG==
-      udev-acl: use a tag instead of a property to mark devices
-      fix logic on-demand loading logic for db and uevent
-      use the usual TAG+=, TAG= logic
-      delete old tags when configuration changes
-      libudev: accept NULL in udev_device_get_tags_list_entry()
-      export tag functions
-      export udev_device_get_tags_list_entry()
-      udevd: always try to find an idle worker instead of forking a new one
-      remove unused parameter from udev_node_mknod()
-      remove debug output during rules parsing
-      warn when renaming kernel-provided nodes instead of adding symlinks
-      man: udevadm trigger - the default is "change" not "add"
-      update README regarding kernel version and default rules
-      add info message when empty NAME is given
-      libudev: add documentation for recently added functions
-      udevd: reload config only for *.rules files
-
-Martin Pitt (1):
-      keymap: Fix Bluetooth key on Acer TravelMate 4720
-
-Mathias Nyman (1):
-      remove buffer-overrun risk in readlink call
-
-Matthias Schwarzott (1):
-      rules: Gentoo - remove old devfs compat rules
-
-Michael Thayer (1):
-      fix device node deletion
-
-Robby Workman (1):
-      configure.ac: move firmware-path setting out of extras section
-
-Yin Kangkai (2):
-      keymap: Add keymap and force-release quirk for Samsung N128
-      keymap: Add keymap quirk of WebCam key for MSI netbooks.
-
-
-Summary of changes from v152 to v153
-============================================
-
-Kay Sievers (1):
-      configure.ac: version bump
-
-Robby Workman (1):
-      configure.ac: fix broken firmware search path in configure.ac
-
-
-Summary of changes from v151 to v152
-============================================
-
-Adrian Bunk (1):
-      udev needs automake 1.10
-
-Amit Shah (2):
-      Fix virtio-ports rule to use $attr instead of $ATTR
-      rules: virtio - fix is to check if the 'name' attribute is present
-
-Andy Whitcroft (2):
-      keymap: Add Samsung Q210/P210 force-release quirk
-      keymap: Add Fujitsu Amilo 1848+u  force-release quirk
-
-Dan Williams (1):
-      modeswitch: morph into tool that only switches Mobile Action cables
-
-David Zeuthen (3):
-      Decrease buffer size when advancing past NUL byte
-      Use UTIL_LINE_SIZE, not UTIL_PATH_SIZE to truncate properties
-      Increase UTIL_LINE_SIZE from 2048 to 16384
-
-Harald Hoyer (1):
-      cdrom_id: remove debugging code
-
-Jerone Young (6):
-      Force key release for volume keys on Dell Studio 1557
-      Fix Keymapping for upcoming Dell Laptops
-      Add new Dell touchpad keycode
-      Revert special casing 0xD8 to latitude XT only
-      Fix Dell Studio 1558 volume keys not releasing
-      Add support for another Dell touchpad toggle key
-
-Kamal Mostafa (3):
-      keymap: Unite laptop models needing common volume-key release quirk
-      keymap: Add force-release quirk for Coolbox QBook 270-02
-      keymap: Add force-release quirk for Mitac 8050QDA
-
-Kay Sievers (43):
-      libudev: bump minor version
-      udevadm: fix untested and broken commit to set buffer size
-      configure.ac: version bump
-      udev-acl: no not encourage use of ACL_MANAGE outside of rules file
-      replace utimes() with utimensat()
-      libbudev-private: rename udev_list_entry_get_flag()
-      udevadm: monitor - use / as separator in --subsystem-match=subsystem[/devtype]
-      use major:minor as entries in symlink stack instead of devpath
-      use major:minor as entries in watch directory
-      libudev: docs - .gitignore backup files
-      firmware: fix possible segfault when firmware device goes away while loading
-      do not reset SELinux context when the node was not touched
-      libudev: add udev_device_new_from_environment()
-      add LGPL COPYING to libudev and GUdev
-      cdrom_id: open non-mounted optical media with O_EXCL
-      libudev: update documentation
-      extras: mobile-action-modeswitch - update gitignore
-      scsi_id: add rand() in retry loop
-      cdrom_id: retry to open the device, if EBUSY
-      cdrom_id: check mount state in retry loop
-      cdrom_id: always set ID_CDROM regardless if we can run cdrom_id
-      rules: delete outdated packagees rules
-      rules: we do not have static devices which are renamed
-      unify/cleanup event handling
-      allow IMPORT{db}="KEY"
-      usb-db: remove double '/'
-      replace "add|change" with "!remove"
-      update NEWS
-      log info only if we actually delete the node
-      udevadm: trigger - switch default action from "add" to "change"
-      remove "all_partitions" option
-      rules: call modprobe on all events but "remove"
-      remove "ignore_remove" option
-      update NEWS
-      cdrom_id: rework feature/profiles buffer parsing
-      cdrom_id: print more debug messages
-      cdrom_id: debug - print feature values in hex
-      cdrom_id: debug - print feature values in hex
-      cdrom_id: set ID_CDROM_MEDIA=1 only for known media
-      Revert "Fix switching Logitech bluetooth adapters into hci mode."
-      add O_NOFOLLOW when creating files in link stack
-      delete only device nodes, not symlinks when deleting a devtmpfs node
-      doc: add section about how *not* to rename device nodes
-
-Marco d'Itri (3):
-      rules: input - create by-path/ links for pci devices
-      Fix switching Logitech bluetooth adapters into hci mode.
-      doc: document the WAIT_FOR timeout
-
-Martin Pitt (12):
-      keymap: Add Dell Inspiron 1011 (Mini 10)
-      Fix brightness keys on MSI Wind U-100
-      keymap: Fix LG X110
-      keymap: Add Toshiba Satellite M30X
-      udev-acl: Correctly handle ENV{ACL_MANAGE}==0
-      input_id: Fix linking
-      keymap: Add Acer TravelMate 6593G and Acer Aspire 1640
-      keymap: Fix another key for Acer TravelMate 6593
-      cdrom_id: Fix uninitialized variables
-      cdrom_id: Fix uninitialized buffers
-      cdrom_id: Do not ignore errors from scsi_cmd_run()
-      cdrom_id: Swap media state and TOC info probing
-
-Mike Brudevold (1):
-      cdrom_id: add missing profiles to feature_profiles
-
-Robert Hooker (1):
-      keymap: Add support for Gateway AOA110/AOA150 clones.
-
-Scott James Remnant (2):
-      libudev: export udev_monitor_set_receive_buffer_size()
-      udevadm monitor: increase netlink buffer size
-
-Thomas Bächler (1):
-      firmware: fix error reporting on missing firmware files
-
-Yury G. Kudryashov (3):
-      configure.ac - fix typo in --with-pci-ids-path option
-      hid2hci: include linux/types.h for __u32
-      configure.ac: ddd --with-firmware-path option
-
-
-Summary of changes from v150 to v151
-============================================
-
-Amit Shah (1):
-      rules: Add symlink rule for virtio ports
-
-Bryan Kadzban (1):
-      Fix reverted floppy-device permissions
-
-Egbert Eich (1):
-      rulews: suse - add do-not-load-KMS-modules rules
-
-Frederic Crozat (1):
-      rules: acl - add COLOR_MEASUREMENT_DEVICE match
-
-Kay Sievers (11):
-      configure.ac: version bump
-      udevd: inotify - do not parse rules at create but at close
-      do not remove device nodes of active kernel devices
-      libudev: device - create db file atomically
-      clarify message about not removed device node
-      input_id: include limits.h
-      keymap: include linux/limits.h
-      keymap: linux/input.h - get absolute include path from gcc
-      delete outdated and unmaintained writing_udev_rules
-      update README and NEWS
-      update tests
-
-Marco d'Itri (2):
-      writing_udev_rules: update rules files names
-      keymap: support for the Samsung N140 keyboard
-
-Martin Pitt (4):
-      add ACL rule for Garmin GPSMap 60
-      keymap: move force-release directory
-      extras/keymap/check-keymaps.sh: Ignore comment-only lines
-      keymap: Fix invalid map line
-
-
-Summary of changes from v149 to v150
-============================================
-
-Clemens Buchacher (2):
-      add Samsung R70/R71 keymap
-      keymap: Samsung R70/R71 force-release quirk
-
-Daniel Drake (2):
-      keymap: Add OLPC XO key mappings
-      keymap: Fix typo in compal rules
-
-Daniel Elstner (1):
-      libudev: wrap in extern "C" block for C++
-
-David Zeuthen (1):
-      Export ID_WWN_VENDOR_EXTENSION and ID_WWN_WITH_EXTENSION
-
-Jerone Young (1):
-      keymap: Lenovo Thinkpad USB Keyboard with Tracepoint
-
-Johannes Stezenbach (2):
-      keymap: add Samsung N130
-      keymap: handle atkbd force_release quirk
-
-Kay Sievers (15):
-      util_unlink_secure(): chmod() before chown()
-      floppy: fix rule to create additional floppy device nodes
-      configure.ac: version bump
-      remove remaining support for CONFIG_SYSFS_DEPRECATED
-      cdrom_id: remove deprecated device matches
-      rules: add "block" match to floppy rule
-      update mtime of nodes and links when we re-use them
-      udevadm: info - fix info --root --query=name --path= for device without a device node
-      remove remaining support for CONFIG_SYSFS_DEPRECATED
-      fix typo in log message priority handling
-      remove UDEV_RUN environment variable
-      udevadm: logging - copy va_list and do not use it twice
-      libudev: doc - add symbols to sections.txt
-      work around gtk-doc which breaks distcheck
-      gobject-introspection: use $datadir instead of $prefix
-
-Marco d'Itri (2):
-      build: keymap - create subdir
-      rules: udev-acl - add firewire video devices
-
-Martin Pitt (12):
-      keymap: Add Acer Aspire 1810T
-      95-keymap.rules: Run on change events, too
-      keymap: fix findkeyboards
-      Speed up udev_enumerate_scan_*
-      keymap: Add hotkey quirk for Acer Aspire One (AO531h/AO751h)
-      Clarify RUN/IMPORT documentation
-      keymap: Add Logitech S510 USB keyboard
-      keymap: add Acer TravelMate 8471
-      keymap: Add Acer Aspire 1810TZ
-      keymap: Add LG X110
-      keymap: Add Fujitsu Amilo Li 1718
-      keymap: Document force-release
-
-Piter PUNK (1):
-      firmware: convert shell script to C
-
-Scott James Remnant (1):
-      70-acl.rules: ACL manage Android G1 dev phones
-
-Thomas de Grenier de Latour (1):
-      libudev: enumerate - fix move_later logic
-
-
-Summary of changes from v148 to v149
-============================================
-
-Daniel Elstner (1):
-      really fix both in-tree and out-of-tree builds
-
-Dmitry Torokhov (1):
-      input-id: identify touchscreens
-
-Kay Sievers (4):
-      libudev: doc - use #NULL
-      configure.ac: version bump
-      really really fix both in-tree and out-of-tree builds
-      fix both in-tree and out-of-tree builds
-
-Martin Pitt (6):
-      input_id: Fix endless loop for non-input devices
-      input_id: Do not tag non-input devices with ID_INPUT
-      input_id: small optimization
-      input_id: check event mask
-      input_id: Check mouse button for ID_INPUT_MOUSE
-      udev_device_get_parent_with_subsystem_devtype(): Clarify documentation
-
-
-Summary of changes from v147 to v148
-============================================
-
-Dan Williams (3):
-      Revert "modem-modeswitch: add a device"
-      Revert "extras/modem-modeswitch: Add Huawei E1550 GSM modem"
-      modem-modeswitch: 61-option-modem-modeswitch.rules is only for Option NV devices
-
-Daniel Mierswa (1):
-      Fix typo in NEWS, ConsoleKit-0.4.11 -> 0.4.1
-
-David Zeuthen (4):
-      cdrom_id: Still check profiles even if there is no media
-      scsi_id: Export WWN and Unit Serial Number
-      Create /dev/disk/by-id/wwn-0x... symlinks
-      Also create /dev/disk/by-id/wwn-0x..-part%n symlinks for partitions
-
-Dmitry Torokhov (1):
-      extras/input_id: Correctly identify touchpads
-
-Harald Hoyer (1):
-      modem-modeswitch: add a device
-
-Kay Sievers (8):
-      rules: set mode of floppy device nodes to 0660
-      remove "ignore_device"
-      print warning for BUS=, SYSFS{}=, ID=
-      test-udev: remove "ignore_device" code
-      udev-test.pl: catch-up with recent changes
-      rules: remove support for IDE (hd*) devices
-      ata_id: skip ATA commands if we find an optical drive
-      Revert "Fix out-of-tree builds"
-
-Martin Pitt (5):
-      README.keymap.txt: small clarification
-      extras: Add input_id
-      70-acl.rules: Use new-style input properties
-      input: Deprecate ENV{ID_CLASS}
-      input_id: code cleanup
-
-Scott James Remnant (1):
-      Fix out-of-tree builds
-
-
-Summary of changes from v146 to v147
-============================================
-
-Alan Jenkins (1):
-      udevd: queue-export - remove retry loop
-
-Andrew Church (1):
-      fix wrong parameter size on ioctl FIONREAD
-
-Daniel Mierswa (2):
-      don't compare a non-existing function with NULL
-      use nanosleep() instead of usleep()
-
-David Zeuthen (4):
-      gudev: remove G_UDEV_API_IS_SUBJECT_TO_CHANGE since API is now stable
-      ata_id: export more advanced ATA features
-      gudev: Fix up GUdevDeviceNumber
-      gudev: Remove LIBUDEV_I_KNOW_THE_API_IS_SUBJECT_TO_CHANGE from priv header
-
-Florian Zumbiehl (10):
-      util_delete_path(): use util_strscpy()
-      util_lookup_group(): fix memory leak if realloc() fails
-      util_delete_path(): handle multiple leading slashes
-      util_create_path(): fix possible out of bounds array access
-      ude_rules.c: fix possible NULL pointer dereference in get_key()
-      util_resolve_sys_link(): fix possible buffer overflow
-      udev_util_encode_string(): fix possible buffer overflow
-      udev-rules.c: parse_file() - fix possible buffer overflow
-      udev_queue_get_seqnum_sequence_is_finished(): fix possible file handle leak
-      util_run_program(): fix possible buffer overflow #2
-
-Harald Hoyer (2):
-      scsi_id: prevent buffer overflow in check_fill_0x83_prespc3()
-      rename interfaces to <iface>_rename if rename fails
-
-Jeremy Kerr (1):
-      util_run_program: restore signal mask before executing event RUN commands
-
-Kay Sievers (45):
-      make: sort Makefile.am per target/extra
-      configure.ac: version bump
-      udev-acl: allow to skip ACL handling
-      rules: rfkill has no group, so use 0644
-      rule_generator: net - fix MATCHDEVID
-      make: add comment
-      update NEWS
-      print warning for NAME="%k" - it breaks the kernel supplied DEVNAME
-      warn about non-readable or empty rules file
-      change database file names
-      assign errno for getgrnam_r()/getpwnam_r()
-      doc: udevadm test *does* create nodes and links these days
-      util_unlink_secure(): chmod() before chown()
-      util_create_path(): fix errno usage
-      inotify_add_watch(): do not store watch, if it failed
-      update TODO
-      update README
-      rules: suse - use NAME for mapper/control
-      libudev-util.c: get_sys_link() - return error for empty link target
-      udev-rules.c: remove 'first_token' variable
-      Revert "udev-rules.c: remove 'first_token' variable"
-      test: catch possible bug in GOTO resolving
-      udevadm: remove symlink support for old commands
-      util_run_program(): skip multiple spaces in argv creation
-      fix whitespace
-      require 2.6.27 for proper signalfd handling
-      fix randonm findings from llvm-clang-analyzer
-      simplify "symlink name stack"
-      reorder create_path() and node/link creation to be called in a direct sequence
-      put util_create_path() and file creastion in a retry loop
-      udevadm: control - remove compat code
-      scsi_id: delete copy of bsg.h
-      fix SYMLINK{} option parsing
-      rules: remove remaining NAME="%k"
-      rules: drop almost all NAME= keys
-      update TODO, NEWS
-      udevd: serialize events for with the same major/minor
-      break loops if util_create_path() returns error
-      remove "last_rule" option
-      use CLOEXEC flags instead of fcntl()
-      unblock signals we might want to handle
-      udevd: create /dev/.udev/rules.d/ before watching it wit inotify
-      gudev: fix pkg-config call to work with "make distcheck"
-      update NEWS
-      Revert "gudev: fix out-of-tree build"
-
-Lennart Poettering (5):
-      pci-db: make sure we actually read the pci.ids file instead of usb.ids
-      sound: recognize saa7134 TV card sound devices as TV cards
-      sound: include ALSA sound card id in ID_ID property
-      sound: include ALSA sound card id in /dev/snd/by-id/ links
-      Revert "sound: include ALSA sound card id in /dev/snd/by-id/ links"
-
-Marco d'Itri (6):
-      doc: writing_udev_rules updated for the new command names
-      rules: sound - do not use /usr/bin/env
-      udevadm: print all messages to stderr with priority higher or equal than LOG_ERR
-      udevadmi: control = exit with rc=2 if there is some system error
-      gudev: gir-scanner workaround for out of tree builds
-      gudev: fix out-of-tree build
-
-Mario Limonciello (1):
-      hid2hci: remove superfluous bmAttributes match
-
-Martin Pitt (24):
-      extras/keymap: Add Acer Aspire 6920
-      extras/modem-modeswitch: eject ZTE MF6xx fake CD-ROMs
-      extras/keymap: Fix hold key on Acer Aspire 6920
-      extras/keymap: Fix case matching for Micro-Star
-      Revert "extras/keymap: Fix case matching for Micro-Star"
-      make raw USB printer devices accessible for lp
-      modem-modeswitch rules: Match more devices
-      extras/keymap: fix hash table collisions
-      extras/keymap: Rename KEY_COFFEE to KEY_SCREENLOCK
-      fix single-session CD detection
-      fix previous commit for CD detection
-      make raw USB printer devices world-readable again
-      50-udev-default.rules: fix printer MODE
-      keymap: Add Logitech Wave USB
-      keymap: add missing map file
-      keymap: fix usb_id invocation
-      keymap: make USB keyboards really work
-      keymap: Add Logitech Wave cordless
-      keymap: add HP Pavillion dv6315ea
-      keymap: add HP 2230s
-      Makefile.am: fix build with mawk
-      extras/keymap/README.keymap.txt: Fix bug report link
-      fix major fd leak in link handling
-      modem-modeswitch: fix ZTE MF6xx rule
-
-Matthias Schwarzott (2):
-      rules: Gentoo update
-      rules: Gentoo update
-
-Maxim Levitsky (1):
-      keymap for Acer Aspire 5720
-
-Peter Rajnoha (1):
-      libudev: allow to store negative values in the udev database
-
-Scott James Remnant (1):
-      util_run_program: *really* restore signal mask before executing event RUN commands
-
-William Jon McCann (1):
-      udev-acl: catch up with ConsoleKit 0.4.1
-
-
-Summary of changes from v145 to v146
-============================================
-
-Alan Jenkins (3):
-      man: fix unused, inaccurate metadata
-      man: SYMLINK can be matched as well as assigned
-      fix spelling
-
-Anssi Hannula (2):
-      rules: exclude digitizers from joystick class
-      udev-acl: add joystick devices
-
-Diego Elio 'Flameeyes' Pettenò (21):
-      Merge libudev, udev, and the unconditional extras in a single Makefile.am.
-      Replace the custom test-run target with the standard make check.
-      Also merge into the top-level Makefile.am the simpler extras.
-      Change hook handling to be more portable.
-      Merge keymap building in the top-level Makefile.am.
-      Make keymap generation rules be silent (backward-compatible).
-      Move pkg-config docs and man pages before conditionals.
-      Finally, also merge gudev into the top-level Makefile.am.
-      Make sure to clean up all the built sources.
-      Make sure to use dependency/target variables.
-      Add silent-rule support for the gudev rules.
-      Fix building of introspection library on top-level Makefile.am.
-      Fix another relative path for the new working directory.
-      Include the correct directory for out-of-source builds.
-      Add tests to the distribution; this fixes "make distcheck".
-      Ask gperf to use ANSI-C for generation.
-      Merge in Makefile.am.inc into Makefile.am
-      Use the keymap check during “make distcheck” rather than “check”.
-      Fix building of documentation when doing out-of-source builds.
-      Fix “make distcheck” run outside of the source directory.
-      Use LT_INIT to explicit that udev needs libtool series 2.
-
-Eric W. Biederman (1):
-      fix util_lookup_group to handle large groups
-
-Erik Forsberg (1):
-      extras/modem-modeswitch: Add Huawei E1550 GSM modem
-
-Kay Sievers (18):
-      udevd: add timestamp to --debug output
-      v4l_id: exit with 0 when --help is given
-      configure.ac: version bump
-      hid2hci: remove hid structures and include kernel header
-      path_id: make global variable static
-      udevadm: trigger - add --sysname-match=
-      rules: serial - fix path_id call
-      path_id: fix typo in comment
-      format names are not case insensitive
-      hid2hci: rewrite (and break) rules and device handling
-      make: build internal tools against libudev-private.la
-      update a few years of copyright
-      libudev: silent gcc warning: may be used uninitialized in this function
-      make: suppress enter/leaving directory messages
-      re-enable failed event tracking
-      "record_failed" -> "fail_event_on_error"
-      udevd: block for 15 seconds after error when too old kernel is detected
-      make: fix issues from non-recursive conversion
-
-Lennart Poettering (1):
-      enumeration: move ALSA control devices to the end of the enumerated devices of each card
-
-Mario Limonciello (2):
-      hid2hci: support to hid2hci for recovering Dell BT devices after S3
-      hid2hci: install re-trigger for hid device when recovering from S3
-
-Martin Pitt (17):
-      add keymap for Clevo D410J laptop
-      extras/keymap: add Zepto ZNote
-      extras/keymap: add Everex Stepnote XT5000T
-      extras/keymap: add Compal Hel80i
-      keymap tool: improve help
-      keymap tool: support scancode/keycode pair arguments
-      keymap: inline one-line key maps
-      extras/keymap: fix check-keymaps.sh for inline mappings
-      extras/keymap: add recently added keymap files to Makefile.am
-      extras/keymap: Add HP Presario 2100
-      extras/keymap: cover more Compaq Evo models
-      extras/keymap: Add Fujitsu Amilo M
-      extras/keymap: teach findkeyboards about USB keyboards
-      extras/keymap: Add Samsung SX22S
-      extras/keymap: Fix crash for unknown keys
-      extras/keymap: Add Samsung NC20
-      extras/keymap: Fix Bluetooth key on Acer Aspire 6920
-
-
-Summary of changes from v144 to v145
-============================================
-
-Ian Campbell (1):
-      scsi_id: correct error handling in prepend_vendor_model
-
-Kay Sievers (10):
-      README: add CONFIG_BLK_DEV_BSG
-      use MIN() MAX() from param.h
-      configure.ac: version bump
-      libudev: device - free values before updating them
-      libudev: enumerate - sort with qsort()
-      udevd: detach event from worker if we kill a worker
-      udevadm: info - add space after R:, A:, W: on database export
-      udevd: make sure a worker finishes event handling before exiting
-      udevd: handle SIGCHLD before the worker event message
-      udevd: use bool
-
-
-Summary of changes from v143 to v144
-============================================
-
-Jon Masters (1):
-      firmware: search for third party or sysadmin supplied firmware updates
-
-Kay Sievers (19):
-      configure.ac: add AM_SILENT_RULES
-      configure.ac: version bump
-      TODO: add cleanup of ATA_COMPAT
-      libudev: queue - add comments for queue format
-      udev/.gitignore: add udev.pc
-      configure.ac: version bump
-      do not exports properties starting with a '.'
-      scsi_id: --reformat_serial - use udev_util_replace_whitespace()
-      ata_id: sync ID_SERIAL(_SHORT) with other *_id tools
-      rules: make ata_id properties the default for all ATA block devices
-      scsi_id: delete no longer needed config file
-      update NEWS
-      man: udev - add private properties like ENV{.FOO}="bar"
-      Merge branch 'firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/jcm/udev-jcm
-      udevadm: test - print list of properties
-      build: do not delete .la files
-      libudev: monitor - handle kernel supplied DEVNAME properly
-      update NEWS
-      build: add *exec* to the internal rootlibdir name
-
-Martin Pitt (2):
-      hid2hci: narrow matches to real HCI devices
-      extras/udev-acl: add smartcard readers
-
-Stefan Richter (1):
-      rules: set group ownership of new firewire driver device files
-
-
-Summary of changes from v142 to v143
-============================================
-
-Alan Jenkins (5):
-      udevadm: settle - fix timeout
-      udevd: remove tiny bit of dead code
-      udevd: implement a more efficient queue file format
-      udev-selinux.c: remove libudev header
-      udevd: queue-export - fix crash
-
-Benjamin Gilbert (1):
-      test: check string substitutions in OWNER and GROUP
-
-Dan Williams (2):
-      rules: tty/net - move from udev-extras
-      extras/modem-modeswitch: move from udev-extras
-
-David Zeuthen (1):
-      gudev: move from udev-extras
-
-Kay Sievers (95):
-      version bump
-      rules: v4l do not mix vbi and video nodes
-      fix possible endless loop for GOTO to non-existent LABEL
-      Revert "rules: v4l do not mix vbi and video nodes"
-      rule-generator: cd - skip by-path links if we create by-id links
-      remove format char string truncation syntax
-      use more efficient string copying
-      edd_id: use openat()
-      use openat(), unlinkat(), fstatat()
-      update TODO
-      remove unused GL_FORMAT from rules parser
-      require key names in uppercase
-      keep the ifdef'd udevd testing/profiling hack
-      fix location of database files
-      udevadm: settle - make --timeout=0 working
-      update NEWS
-      rules: add SUBSYSTEM match to scsi rules
-      cdrom_id: suppress ID_CDROM_MEDIA_STATE=blank for plain non-writable CDROM media
-      udevadm: control - add comment to man page about --reload-rules
-      cdrom_id: add error message if open() fails
-      udevadm: settle - add --exit-if-exists=<file>
-      udevd: remove check for dev_t, DEVPATH_OLD takes care of that
-      str[sp]cpyl: add __attribute__ ((sentinel))
-      udevd: convert to event worker processes
-      udevd: close netlink socket in worker and set cloexec
-      rules: do not call path_id for virtual devices
-      udevd: use enum instead of char in struct declaration
-      allow format substitution in path of ATTR{<path>}=="<value>"
-      cleanup $attr{} substitution
-      path_id: implement in C using libudev
-      path_id: update SCSI handling
-      path_id: add comments
-      fix signed/unsigned warning
-      libudev: enumerate - allow multiple keys with the same name
-      udevadm: trigger - add --property-match=<key>:<value>
-      udevadm: info - accept --query without a value and print properties
-      udevadm: control - --env -> --property
-      udevadm: monitor --environment -> --property
-      path_id: handle fibre channel
-      path_id: add iscsi support
-      path_id: delete old shell script
-      udevd: print error if worker dies unexpectedly
-      path_id: rename scsi sub-fuctions
-      libudev: add comments to libudev.h
-      libudev: move to top-level directory
-      fix libudev include in Makefile.am.in
-      libudev: device_new() -> udev_device_new()
-      udevd: log info for created/killed workers
-      libudev: call log functions conditionally
-      move syslog wrapper to libudev
-      move common stuff from udev/ to private parts of libudev/
-      libudev: rename private files to *-private.c
-      rules: remove scsi ch module loading rule
-      update NEWS
-      udevadm: info -revert "accept --query without argument"
-      README: add kernel options
-      README: add INOTIFY and SIGNALFD
-      USE_LOG -> ENABLE_LOGGING, DEBUG -> ENABLE_DEBUG, USE_SELINUX -> WITH_SELINUX
-      libudev: add gtk-doc
-      libudev: update documentation
-      libudev: doc - add section headers
-      libudev: doc - add enumerate
-      libudev: doc - add queue
-      update TODO
-      libudev: doc - add namespace for index
-      libudev: move .so version to libudev Makefile
-      autogen.sh: simplify
-      TODO: update
-      libudev: remove prefix from .so version variables
-      libudev: doc - add empty libudev.types
-      udev-acl: move from udev-extras
-      INSTALL: add --enable-extras
-      udev-acl: handle missing action when called in CK mode
-      v4l_id: move from udev-extras
-      libudev: doc - libudev-docs.sgml -> libudev-doc.xml
-      gudev: fix typo in configure option
-      v4l_id: 70-v4l.rules -> 60-persistent-v4l.rules
-      configure: enable all extras by default, provide --disable-extras
-      autogen.sh: make "CFLAGS=-O0 ./autogen.sh" working
-      NEWS: add --disable-extras
-      cleanup ./configure installation directory options
-      rules: remove MMC rule, 2.6.30 has the modalias
-      configure.ac: print error if gperf is missing
-      libudev: install in $libdir and move later to $rootlibdir
-      extras/keymap: use LIBEXECDIR instead /lib/udev
-      README: add /lib/udev/ is private
-      rules: do not install usb-id/pci-id rules when --disable-extras is used
-      extras: delete man pages for private udev tools
-      README: update
-      extras/keymap: install findkeyboards in /lib/udev
-      INSTALL: use /sbin instead of %{sbindir}
-      NEWS: update
-      udev.pc: add
-      Merge branch 'master' of git+ssh://master.kernel.org/pub/scm/linux/hotplug/udev
-      docs: install writing_udev_rules
-
-Lennart Poettering (2):
-      rules: sound - move from udev-extra
-      usb-db: move from udev-extras
-
-Marcel Holtmann (1):
-      rules: make RFKILL control device world readable
-
-Mario Limonciello (1):
-      hid2hci: move from udev-extras
-
-Martin Pitt (5):
-      keymap: move from udev-extras
-      extras/keymap: Fix WLAN button on ThinkPads
-      keymap: Update findkeyboard path in docs
-      udev-acl: Manage hplip device permissions
-      extras/keymap: Update findkeyboards location
-
-Matthias Schwarzott (3):
-      rules: Gentoo update
-      rules: Gentoo update
-      rules: Gentoo update
-
-Scott James Remnant (1):
-      OWNER/GROUP: fix if logic
-
-
-Summary of changes from v141 to v142
-============================================
-
-Andre Przywara (1):
-      rules: create /dev/cpu/<n>/cpuid world readable
-
-Ian Campbell (1):
-      path_id: support identification of Xen virtual block devices
-
-John Wright (1):
-      edd_id: add cciss devices
-
-Kay Sievers (46):
-      version bump
-      libudev: path_encode - always return 0 if encoded string does not fit into size
-      libudev: monitor - clarify socket handling documentation
-      udevd: log error for too old kernels or CONFIG_SYSFS_DEPRECATED
-      rules: remove DVB shell script
-      update NEWS
-      cdrom_id: add Xen cdrom support
-      test-libudev: update monitor source
-      TODO: add packet filter
-      update NEWS
-      cdrom_id: add and use ID_CDROM_MEDIA to decide if we run vol_id
-      libudev: monitor - add client socket filter for subsystem value
-      udevadm: monitor - print error if we can not bind to socket
-      update TODO
-      udevadm monitor - add --subsystem-match=
-      libudev: monitor - use simpler hash
-      libudev: monitor - switch to filter_add_match_subsystem_devtype()
-      libudev: monitor - do not filter messages with wrong magic
-      udevadm: monitor - add <subsytem>:<devtype> support
-      libudev: monitor - add udev_monitor_filter_remove
-      libudev: queue - fix get_seqnum_is_finished()
-      cdrom_id: skip media tests if CDROM_DRIVE_STATUS != CDS_DISC_OK
-      libudev: queue - clarify comments
-      libudev: monitor - export filter_update()
-      update NEWS
-      drop "extern" keyword from non-static function
-      rule_generator: net - fix usb comment generation
-      rules: input - add links for USB/platform non-kbd/mouse devices
-      rules: input - fix comments
-      rules: add rfcomm* to group dialout
-      accept DEVNAME from the kernel as a hint for the node name
-      update TODO
-      build: use AC_MSG_RESULT
-      rules: add "event*" match
-      udevd: revert initial device node creation
-      rules: remove initramfs comment
-      handle devtmpfs nodes
-      oops, removed ppp entry from rules got committed
-      remove all PHYSDEVPATH handling and warning about
-      remove asmlinkage
-      rules: fix ieee1394 rules
-      add "static" back to the inline functions
-      update TODO
-      delete vol_id and require util-linux-ng's blkid
-      delete libvolume_id
-
-Lubomir Rintel (1):
-      rule-generator: net - whitelist NICs that violate MAC local scheme
-
-
-Summary of changes from v140 to v141
-============================================
-
-Adam Buchbinder (4):
-      usb_id: add manpage
-      cdrom_id: update manpage
-      create_floppy_devices: expand manpage
-      vol_id: fix language in manpage
-
-Alan Jenkins (1):
-      avoid leaking netlink socket fd to external programs
-
-Borislav Petkov (1):
-      rules: rename ide-floppy to ide-gd
-
-David Brownell (1):
-      rules: exclude mtd* from persistent disk links
-
-Kay Sievers (15):
-      rules: fix extra quote in 50-udev-default.rules
-      version bump
-      udevadm: test - handling trailing '/' in devpath
-      udevadm: monitor - clarify printed header
-      rules: remove ram* from persisten disk links blacklist
-      rules: serial - support ttyACM devices
-      rules: replace IDE driver with media match
-      usb_id: add ID_VENDOR_ID, ID_MODEL_ID, ID_USB_INTERFACE_NUM, ID_USB_DRIVER
-      libudev: GPL -> LGPL
-      usb_id: remove unused variable
-      send monitor events back to netlink socket
-      "UDEV_MONITOR_KERNEL/UDEV" -> "kernel/udev"
-      IMPORT: 2048 -> 4096 bytes buffer
-      path_encode: fix max length calculation
-      libudev: monitor - unify socket message handling
-
-Michal Soltys (1):
-      rules: md-raid.rules fix
-
-Robby Workman (1):
-      udevadm: trigger - add "--action" to --help
-
-Scott James Remnant (1):
-      libudev: monitor - ignore messages from unusual sources
-
-
-Summary of changes from v139 to v140
-============================================
-
-Harald Hoyer (1):
-      libvolume_id: bump age
-
-Kay Sievers (12):
-      version bump
-      update TODO
-      volume_id: ntfs - fix uuid setting
-      update TODO
-      rules: Fedora update
-      libudev: queue - use lstat() to check existence of symlink
-      udevadm: settle - add --seq-start= --seq-end=
-      udevd: switch watch symlinks to devpath
-      udevadm: add text for new options to command and man page
-      update TODO
-      libudev: ctrl - return error after sending ctrl message
-      udevadm: settle - use timeout signal, instead of loop counter
-
-Michael Prokop (1):
-      fix compile error in debug mode
-
-Scott James Remnant (1):
-      udevadm: settle - synchronise with the udev daemon
-
-
-Summary of changes from v138 to v139
-============================================
-
-Kay Sievers (11):
-      version bump
-      remove static local variable
-      use the event udev_device to disable the watch on "remove"
-      add "nowatch" to disable a default installed watch with a later rule
-      add m4/ subdir
-      use AC_USE_SYSTEM_EXTENSIONS instead of AC_GNU_SOURCE
-      usb_id: add ID_USB_INTERFACES=:0e0100:0e0200:010100:010200:
-      usb_id: return values if called directly for an usb_device
-      usb_id: fix NULL string usage
-      usb_id: fix comment
-      udevadm: info - export all devices with --export-db
-
-Scott James Remnant (10):
-      Don't add inotify watch until RUN rules processed.
-      Clear existing inotify watch before processing.
-      Cleanup a little.
-      Allow watch handle to be stored in the udevdb.
-      Store watch handle in db.
-      Use the udevdb to speed up watch clearing.
-      Put a log message in a more sensible place.
-      Output watch handle in udevadm info.
-      lookup the old watch handle; reload only if has a path
-      Look at more inotify events in the buffer than just the first.
-
-
-Summary of changes from v137 to v138
-============================================
-
-David Zeuthen (1):
-      *_id: add model/vendor enc strings
-
-Karel Zak (2):
-      vol_id: fix ddf version string
-      vol_id: add missing id->type to swap0
-
-Kay Sievers (13):
-      man: fix grammar
-      version bump
-      fix NAME="" logic
-      rules: dm - add escape for uuid links with whitespace
-      test: add test for empty and non-existent ATTR
-      rules: fix md "change"/"remove" handling
-      autogen.sh: add more warnings
-      fix NAME= and OPTION+="string_escape=..." logic
-      rules: move OPTIONS to separate rule
-      use global "reload_config" flag
-      rules: add "watch" option to dm and md rules
-      rules: include loop block devices in persistent links
-      release 138
-
-Matthias Schwarzott (1):
-      rules: Gentoo update
-
-Miklos Vajna (1):
-      doc: writing udev rules - refer to 'udevadm info' instead of 'udevinfo'
-
-Scott James Remnant (2):
-      udevd: optionally watch device nodes with inotify
-      rules: update persistent storage rules to use inotify watches
-
-
-Summary of changes from v136 to v137
-============================================
-
-Alan Jenkins (2):
-      man: typo fixes
-      remove stray initializer
-
-Kay Sievers (17):
-      version bump
-      rules: fix typo in ide cd rule
-      libudev: use 4096 bytes buffer for attribute reading
-      rules: add drm devices to group "video"
-      do not complain about a missing /etc/udev/rules.d/
-      udevadm: test - remove --force option
-      update NEWS
-      remove name from index if the node name has changed
-      cleanup old names before creating the new names
-      open-code pollfd setup
-      increase netif renaming timeout from 30 to 90 seconds
-      Merge commit '5f03ed8a56d308af72db8a48ab66ed68667af2c6'
-      Merge commit '9032f119f07ad3b5116b3d4858816d851d4127de'
-      split up long line
-      udevd: add back SA_RESTART
-      usb_id: handle ATAPI devices like SCSI devices
-      udevadm: settle - fix typo
-
-Lennart Poettering (1):
-      fix naming for tape nst devices in /dev/tape/by-path/
-
-Olaf Kirch (2):
-      udevd: use ppoll instead of signal pipes
-      reap children faster
-
-Scott James Remnant (2):
-      Allow user and group lookup to be disabled.
-      Expose delayed name resolution
-
-Sven Jost (1):
-      volume_id: support via raid version 2
-
-
-Summary of changes from v135 to v136
-============================================
-
-Adam Buchbinder (1):
-      extras: fix mis-spelling of "environment"
-
-Harald Hoyer (1):
-      rule_generator: fix enumeration for write_cd_rules
-
-Jeremy Higdon (1):
-      path_id: rework SAS persistent names
-
-Karel Zak (1):
-      volume_id: HPFS code clean up
-
-Kay Sievers (54):
-      rules: ATA_COMPAT do not try to match on sr*, it will never have vendor ATA
-      scsi_id: do not fail if no serial is found like for optical drives
-      update configure and NEWS
-      rules: fix isdn rules
-      rules: add persistent /dev/serial/{by-id,by-path} rules
-      make: install serial rules file
-      make: do not delete autotools generated file with distclean
-      udevadm: settle - allow --timeout=0 and --quiet
-      rules: move aoe rules to default rules file
-      volume_id: btrfs - update format
-      rules: add "do not edit header"
-      volume_id: support sub-uuid's and plug in btrfs device uuid
-      libudev: include <sys/types.h>
-      build: add -lsepol
-      build: just use autoreconf -i
-      rules: remove ide-scsi
-      rules: first simple step merging with Ubuntu rules
-      "'/sbin/modprobe abnormal' exit" - also print program options
-      rules: more changes toward Ubuntu rules merge
-      rules: more changes toward Ubuntu rules merge
-      rules: remove /dev/raw/raxctl symlink, it's a devfs leftover
-      rules: rtc - create rtc compat link only for cmos type rtc
-      rules: remove legacy symlinks
-      rules: do not put raw1394 in "video" group
-      rules: second round merging with Ubuntu rules
-      rules: remove /dev/dsp /dev/audio
-      rules: put alsa in group "audio"
-      rules: isdn - remove /dev/isdn/capi20 symlink
-      rules: provide /dev/raw/rawctl
-      if needed, store database entries also for devices which do not have a device node
-      build: use autoreconf --symlink
-      usb_id: add "image" class
-      require non-SYSFS_DEPRECATED 2.6.20+ kernel
-      build: default to --prefix=/usr --exec-prefix=""
-      libudev: enumerate - add lookup by property
-      rules: input - make sure needed variables are set
-      libudev: device - read "uevent" only if info is not already loaded
-      libudev: subsytem -> subsystem
-      libudev: bump revision
-      usb_id: use devtype lookup
-      require 2.6.22+ kernel
-      rules: Ubuntu merge - use group "cdrom"
-      rules: Ubuntu merge - use group "tape"
-      rules: replace DVB shell script rule
-      rules: Ubuntu merge - s/uucp/dialout/
-      update NEWS
-      update NEWS
-      enable skipping of "naming-only" rules
-      usb_id: s/image/media/
-      udevadm: s/udevinfo/udevadm info/
-      rules: reorder block rules
-      rules: zaptel - add "dialout" group
-      libudev: device - add udev_device_get_property_value()
-      libudev: test - add udev_device_get_property_value()
-
-Marcel Holtmann (3):
-      libudev: device - add devtype support
-      libudev: device - lookup subsystem and devtype together
-      libudev: device - remove udev_device_get_parent_with_subsystem
-
-Michal Soltys (1):
-      man: udev - update NAME assignment
-
-Ryan Thomas (1):
-      rules: add rules for AoE devices
-
-
-Summary of changes from v134 to v135
-============================================
-
-Kay Sievers (6):
-      usb_id: add "break" to currently unused case labels
-      rules: fix cciss disk/by-id/ links
-      rules: add infiniband rules
-      rules: infiniband.rules -> 40-infiniband.rules
-      fix network interface name swapping
-      update configure and NEWS
-
-Marcel Holtmann (1):
-      usb_id: fix switch statement for video type
-
-Piter PUNK (2):
-      rules: /dev/null -> X0R
-      rules: add usb device nodes
-
-
-Summary of changes from v133 to v134
-============================================
-
-Gabor Z. Papp (1):
-      include errno.h in sysdeps.h
-
-Harald Hoyer (1):
-      rules: add persistent rules for memory stick block devices
-
-Kay Sievers (19):
-      autogen.sh: fix -print-multi-os-directory usage
-      volume_id: update btrfs magic
-      bump version
-      rules: merge group "video" into default rules
-      rules: v4l - add by-id/ links for USB devices
-      libudev: accept NULL whitelist in util_replace_chars()
-      usb_id: replace chars in returned strings
-      ata_id: make sure, we do not have slashes in values
-      scsi_id: make sure, we do not have slashes in values
-      volume_id: remove unused usage types
-      vol_id: if regular files are probed, use stat() for the size value
-      volume_id: update btrfs
-      volume_id: clear probing result before probing and do not probe a second time, if not needed
-      path_id: fix fibre channel handling
-      update NEWS TODO
-      floppy: use ARRAY_SIZE()
-      fix handling of swapping node name with symlink name
-      silence PHYSDEV* warning for WAIT_FOR* rules
-      rules: exclude "btibm" devices from vol_id calls
-
-Matthias Schwarzott (1):
-      rules: Gentoo update
-
-Peter Breitenlohner (2):
-      man: fix typos
-      floppy: fix array bounds check and minor calculation
-
-
-Summary of changes from v132 to v133
-============================================
-
-Alan Jenkins (2):
-      udevd: de-duplicate strings in rules
-      scsi_id: we don't use DEVPATH env var anymore, update man page
-
-Karel Zak (1):
-      volume_id: fat - move check for msdos signature (0x55 0xaa)
-
-Kay Sievers (22):
-      silence "comparison between signed and unsigned"
-      string index - split nodes and childs to allow and unlimited number of childs
-      reserve child slot 0
-      merge trie nodes, childs and root into a single array
-      set errno = ENOSYS in inotify stub
-      udevadm: info - unify -V and --version
-      rules: remove DEVTYPE disk/partition
-      rules: remove pnp shell script, acpi loads these modules properly
-      update NEWS
-      configure: add linux-hotplug mail address
-      remove len == 0 check, the index root is always '\0'
-      volume_id: bump revision
-      volume_id: always check for all filesystem types and skip conflicting results
-      volume_id: fat - accept empty FAT32 fsinfo signature
-      fix spelling in comment
-      volume_id: ntfs - mark as no other fs must match
-      vol_id: clarify error message
-      libudev: device - handle disk "device" link for partitions in deprecated sysfs layout
-      limit $attr(<symlink>) magic to well-known links only
-      udevd: fix cleanup of /dev/.udev/uevent_seqnum
-      fix $links substitution for devices without any link
-      update NEWS
-
-Sergey Vlasov (1):
-      udevadm: fix option parsing breakage with klibc
-
-
-Summary of changes from v131 to v132
-============================================
-
-Kay Sievers (2):
-      fix size_t compiler warning on 32 bit platforms
-      convert debug string arrays to functions
-
-
-Summary of changes from v130 to v131
-============================================
-
-Alan Jenkins (17):
-      libudev: fix sysnum logic for digit-only device names
-      udevd: avoid overhead of calling rmdir on non-empty directories
-      use more appropriate alternatives to malloc()
-      libudev: util - optimize path_encode()
-      libudev: allocate udev_device->envp[] dynamically
-      replace strncpy() with strlcpy()
-      use re-entrant variants of getpwnam and getgrnam
-      udevd: fix memory leak
-      udevd: fix WAIT_FOR_SYSFS execution order
-      fix handling of string_escape option
-      udevd: use a tighter loop for compare_devpath()
-      udevd: avoid implicit memset in match_attr()
-      kerneldoc comment fixes
-      udevd: simplify rules execution loop
-      udevd: fix termination of rule execution
-      udevd: be more careful when matching against parents
-      udevd: shrink struct token to 12 bytes
-
-Kay Sievers (113):
-      remove outdated docs/README-gcov_for_udev
-      libudev: device - add device lookup by subsystem:sysname
-      libudev: also prefix non-exported functions with udev_*
-      libudev: add udev_monitor_send_device()
-      libudev: list - add flag
-      libudev: device - generate DEVNAME and DEVLINKS properties
-      vol_id: update README
-      libudev: handle ! in sysname, add sysnum, return allocated list_entry on add
-      delete simple-build-check.sh
-      test: move global ENV{ENV_KEY_TEST}="test" to local rule
-      libudev: monitor - fix send_device() property copying
-      libudev: device - add get_envp() to construct envp from property list
-      libudev: do not include ctrl in libudev.so
-      libudev: monitor - do not mangle DEVLINKS property
-      libudev: update DEVLINKS property when properties are read
-      libudev: device - lookup "subsystem" and "driver" only once
-      libudev: device - export properties when values are set
-      libudev: list - handle update of key with NULL value
-      libudev: ctrl - fix typo in set_env()
-      libudev: add global property list
-      libudev: device - copy global properties, unset empty properties
-      volume_id: btrfs - update magic to latest disk format
-      udevd: use libudev
-      move udev_device_db to libudev
-      rename udev source files
-      libudev: always add UDEV_LOG
-      libudev: monitor - export MAJOR/MINOR only if available
-      udev-node: name_list -> udev_list
-      udev-rules-parse: name_list -> udev_list
-      delete name_list, move common file functions
-      fix sorting of rules files
-      run_program: prevent empty last argv entry
-      update IMPORT= file/stdout property parsing
-      update rules file parsing
-      delete udev-util-file.c
-      libudev: list - prepend udev_* to all functions
-      libudev: add sysnum to test program
-      test: fix a few unintentially wrongly written rules which cause parse errors
-      libudev: monitor - add set_receive_buffer_size()
-      libudev: ctrl - change magic to integer
-      libudev: make list_node functions available
-      udevd: use udev_list_node
-      collect: use udev_list
-      delete list.h
-      merge udev-rules.c and udev-rules-parse.c
-      make struct udev_rules opaque
-      move run_program to util
-      udev_event_run() -> udev_event_execute_rules()
-      udev_rules_run() -> udev_event_execute_run();
-      move udev_rules_apply_format() to udev-event.c
-      udev_list_cleanup() -> udev_list_cleanup_entries()
-      selinux_init(udev) -> udev_selinux_init(udev)
-      prefix udev-util.c functions with util_*
-      pass make distcheck
-      libudev: device - get_attr_value() -> get_sysattr_value()
-      cdrom_id: remove ARRAY_SIZE() declaration
-      replace missing get_attr_value() -> get_sysattr_value()
-      add "root" == 0 shortcuts to lookup_user/group()
-      do not use the new work-in-progress parser rule matcher
-      libudev: device - 128 -> ENVP_SIZE
-      add util_resolve_subsys_kernel()
-      handle numerical owner/group string in lookup_user/group()
-      replace in-memory rules array with match/action token list
-      do not create temporary node ($tempnode) if node already exists
-      shrink struct udev_event
-      shrink struct udev_event
-      rule_generator: fix netif NAME= value extraction regex
-      skip SYMLINK rules for devices without a device node
-      rules: let empty strings added to buffer always return offset 0
-      fix uninitialized variable warnings
-      cache uid/gid during rule parsing
-      distinguish "match" from "assign" by (op < OP_MATCH_MAX)
-      determine at rule parse time if we need to call fnmatch()
-      special-case "?*" match to skip fnmatch()
-      libudev: monitor - replace far too expensive snprintf() with strlcpy()
-      libudev: monitor - cache result of monitor send buffer
-      fix "unused" warnings
-      remove debug printf
-      match KEY="A|B" without temporary string copy
-      match_attr() - copy attr value only when needed
-      do not init string arrays, just clear first byte
-      fix $attr{[<subsystem>/<sysname>]<attribute>} substitution
-      libudev: device - fill envp array while composing monitor buffer
-      test: add RUN+="socket: ..." to a test to run monitor code
-      libudev: device - allocate envp array only once
-      update NEWS
-      udevd: merge exec and run queue to minimize devpath string compares
-      ATTR{}== always fails if the attribute does not exist
-      rules: remove SCSI timeouts
-      rules: remove "add" match from usb device node rule
-      edd_id: add "change" event match
-      fstab_import: add "change" event match
-      write trace log to stderr
-      log rules file and line number when NAME, SYMLINK, OWNER, GROUP, MODE, RUN is applied
-      skip entire rule containing device naming keys, if no device can be named
-      fix udev_node_update_old_links() logic
-      move some info() to dbg()
-      add "devel" and "install" switches to autogen.sh
-      move debugging strings inside #ifdef DEBUG
-      firmware.sh: record missing files in /dev/.udev/firmware-missing/
-      fix list handling in enumerate and rules file sorting
-      volume_id: btrfs update
-      info() PROGRAM and IMPORT execution
-      fix $links substitution
-      fix cleanup of possible left-over symlinks
-      do not import the "uevent" file when we only read the db to get old symlinks
-      usb_id: MassStorage SubClass 6 is "scsi" not "disk"
-      unify string replacement
-      $links should be relative
-      fix indentation
-      rules: md - add mdadm 3 device naming
-      cleanup /dev/.udev/queue on startup and exit
-      udevadm: settle - exit if udevd exits
-
-Matthias Koenig (1):
-      volume_id: swap - larger PAGE_SIZE support
-
-Steven Whitehouse (1):
-      volume_id: support for GFS2 UUIDs
-
-
-Summary of changes from v129 to v130
-============================================
-
-Kay Sievers (26):
-      fix compile error with --disable-logging
-      libudev: enumerate - add_device() -> add_syspath()
-      volume_id: hpfs - read label and uuid
-      use no_argument, required_argument, optional_argument in longopts
-      libudev: get rid of selinux
-      libudev: device - add get_parent_with_subsystem()
-      usb_id: use libudev
-      udevadm: info - fix --query=all for devices without a device node
-      vol_id: add size= option
-      move selinux noops to udev.h
-      volume_id: add dbg() as noop to check for compile errors
-      vol_id: fix logging glue
-      vol_id: always use the safe string versions for unencoded label and uuid
-      volume_id: better DDF raid detection
-      volume_id: add btrfs
-      volume_id: use PRIu64i, PRIx64 macros
-      udevd: clarify deprecated sysfs layout warning
-      libudev: fix --enable-debug
-      don not print error if GOTO jumps just to next rule
-      volume_id: add more vfat debugging information
-      libudev: libudev.pc remove selinux
-      store node name and symlinks into db symlink target if they are small enough
-      volume_id: more fat debugging
-      libudev: fix typo in "multiple entries in symlink" handling
-      connect /sys and /dev with /sys/dev/{block,char}/<maj>:<min> and /dev/{block,char}/<maj>:<min>
-      replace spaces in dm and md name symlinks
-
-
-Summary of changes from v128 to v129
-============================================
-
-Alan Jenkins (7):
-      udev-test.pl: set non-zero exitcode if tests fail
-      scsi_id: compiler warning on 32-bit
-      trivial cleanup in udev_rules_iter
-      avoid repeated scans for goto targets (udev_iter_find_label)
-      replace strerror() usage with threadsafe "%m" format string
-      fix messages (inc. debug compile failure) introduced when optimizing "goto"
-      allow compiler to check dbg() arguments on non-debug builds
-
-Kay Sievers (46):
-      libudev: switch to "udev_device_get_parent"
-      libudev: udev_device - add attribute cache
-      libudev: handle "device" link as parent, handle "class" "block" as "subsystem"
-      udevadm: info - fix lookup-by-name
-      libudev: switch API from devpath to syspath
-      libudev: rename ctrl_msg to ctrl_msg_wire
-      vol_id: fix lib logging glue
-      fix broken symlink resolving
-      fix udevadm trigger
-      libudev: pass udev_device in enumerate
-      libudev: fix "subsystem" value
-      always include config.h from Makefile
-      libudev: udev_device_get_devname -> udev_device_get_devnode
-      libudev: add udev_device_new_from_devnum()
-      libudev: also import "uevent" file when reading udev database
-      libudev: add userdata pointer
-      libudev: replace awkward callback list interfaces with list iterators
-      libudev: get devnum from uevent file
-      libudev: enumerate_get_devices_list -> enumerate_get_list
-      libudev: initialize selinux only when needed
-      libudev: device - read database only when needed
-      libudev: rework list handling
-      libudev: more list rework
-      lubudev: accept more sys directories as devices, and parent devices
-      libudev: enumerate - accept list of subsystems to scan, or skip
-      libudev: enumerate "subsystem"
-      libudev: enumerate - scan /sys/block/ if needed
-      libudev: enumerate - split new() and scan()
-      test: replace ancient sysfs tree with recent one
-      test: add missing pci directory because of .gitignore *.7
-      gitignore: move *.8 to subdirs
-      test: replace last reference of "/class/*" devpath
-      fix dbg() callers
-      libudev: enumerate - scan devices and subsystems, add subsystem and attribute filter
-      udevadm: trigger: use libudev
-      fix segfault caused by wrong pointer used in dbg()
-      libudev: device_init() -> device_new()
-      udevadm: trigger fix long option --type=
-      libudev: add queue interface
-      udevadm: settle - use libudev queue
-      libudev: device - handle /sys/block/<disk-device-link>/<partition>
-      libudev: enumerate - ignore regular files while scanning
-      udevadm: trigger --type=failed - use libudev queue
-      rules: ieee1394 - create both, by-id/scsi-* and by-id/ieee-* links
-      build: include Makefile.am.inc in all Makefile.am
-      udevd: print warning if CONFIG_SYSFS_DEPRECATED is used
-
-
-Summary of changes from v127 to v128
-============================================
-
-Alan Jenkins (8):
-      fix uninitialized name_list error::ignore_error
-      do not needlessly declare some local variables in udev_rules_parse.c as static
-      remove deprecated envp[] in main()
-      fix name compare bug name_list_key_add()
-      remove redundant string copy in udev_rules_apply_format()
-      remove redundant "remove trailing newlines" in udevadm info
-      threadsafe rules iteration
-      fix off-by-one in pass_env_to_socket()
-
-Kay Sievers (53):
-      libudev: add monitor documentation
-      libudev: fix --disable-log
-      autogen.sh: add --with-selinux
-      volume_id: hfs - calculate proper uuid
-      fix dangling pointer returned by attr_get_by_subsys_id()
-      udev-test.pl: add --valgrind option
-      libudev: libudev.pc add Libs.private
-      volume_id: fail on undefined __BYTE_ORDER
-      remove FAQ
-      libudev: fix monitor documentation
-      libudev: add udev_device_get_syspath()
-      udev_device_init() remove statically allocated device support
-      udevadm: info - fix broken --device-id-of-file=
-      udevadm: control - use getopt_long()
-      udevadm: print warning to stderr if udevadm is called by symlink
-      udev-test.pl: remove left-over comment from --valgrind option
-      udevadm: rename source files
-      udevadm: rename internal functions to udevadm_*
-      udevadm: split out control functions
-      udevadm: move init from commands to udevadm
-      autogen.sh: add debug
-      use libudev code, unify logging, pass udev context around everywhere
-      volume_id: linux_raid - fix logic for volumes with size == 0
-      vol_id: add --debug option
-      udevadm: add --version --help options to man page, hide them as commands
-      move udev_ctrl to libudev-private
-      udev-test.pl: set udev_log="err"
-      test-udev: cleanup libudev context and overridden rules file string
-      test-udev: remove unused var
-      add a bunch of private device properties to udev_device
-      udevadm: monitor - use libudev for udev monitor
-      libudev: monitor - add event properties to udev_device
-      udevadm: log message if udevadm link is used
-      udevd: remove max_childs_running logic
-      libudev: monitor- add netlink uevent support
-      udevadm: monitor - use libudev code to retrieve device data
-      libudev: udev_device - read "driver" value
-      libudev: rename enumerate function
-      libudev: add selinux
-      libudev: initialize selinux after logging
-      volume_id: merge util.h in libvolume_id-private.h
-      update file headers
-      libudev: udev_device - add more properties
-      libudev: do not use udev_db.c
-      libudev: get rid of udev_sysfs.c
-      libudev: get rid of udev_utils.c
-      libudev: rename libudev-utils.c libudev-util.c
-      libudev: do not use any udev source file
-      extras: use libudev code
-      convert to libudev and delete udev_utils_string.c
-      get rid of udev_sysdeps.c
-      use size definitions from libudev
-      udevadm: info - use "udev_device"
-
-
-Summary of changes from v126 to v127
-============================================
-
-Karel Zak (2):
-      build-sys: don't duplicate file names
-      build-sys: remove non-POSIX variable names
-
-Kay Sievers (26):
-      add inotify dummy definitions if inotify is not available
-      build: remove autopoint check
-      udevadm: trigger - add missing attr filter to synthesized "subsystem" register events
-      ignore duplicated rules file names
-      fix .gitignore
-      rules: delete all distro rules which do not use default rules
-      rules: add nvram
-      rules: add isdn rules
-      rules: Gentoo update
-      add missing includes
-      add some warnings
-      update .gitignore
-      add missing 'v' for "make changelog"
-      build: fix "make dist"
-      vol_id: make the --offset= argument optional
-      rules: optical drives - probe at last session offset, do not probe for raid
-      libudev: add library to access udev information
-      libudev: split source files
-      update INSTALL
-      libudev: add udev event monitor API
-      volume_id: remove deprecated functions and bump major version
-      volume_id: remove left-over fd close()
-      split udev_device.c to leave out rules handling from libudev
-      libudev: link against selinux if needed
-      firmware.sh: lookup lookup kernel provided firmware directory
-      libudev: require LIBUDEV_I_KNOW_THE_API_IS_SUBJECT_TO_CHANGE
-
-Michal Soltys (1):
-      rules: fix md rules for partitioned devices
-
-
-Summary of changes from v125 to v126
-============================================
-
-Kay Sievers (9):
-      delete all Makefiles and move udev source to udev/
-      use autotools
-      rules: mode 0660 for group "disk"
-      rules: update Fedora rules
-      update ChangeLog
-      INSTALL: --enable-selinux not --with-selinux
-      volume_id: move static lib to $prefix
-      volume_id: create relative links
-      rules: run vol_id on opticals only if media is found
-
-Marco d'Itri (1):
-      rules: Debian update
-
-Thomas Koeller (1):
-      use proper directory lib/lib64 for libvolume_id
-
-
-Summary of changes from v124 to v125
-============================================
-
-John Huttley (1):
-      rules: tape rules - add nst to usb and 1394 links
-
-Karl O. Pinc (1):
-      man: clarify $attr{} parent searching
-
-Kay Sievers (14):
-      collect: fix size_t printf
-      path_id: suppress trailing '-' like 'ID_PATH=pci-0000:05:01.0-'
-      rules: add v4l persistent links
-      docs: update some docs and delete outdated stuff
-      scsi_id: fix fallback to sg v3 for sg nodes
-      rules: fix cciss rules for partition numbers > 9
-      udev.conf: udevcontrol -> udevadm control
-      rules: use consistently OPTIONS+=
-      scsi_id: the fallback fix broke error handling
-      man: rebuild from xml
-      do not touch node ownership and permissions, if already correct
-      rules: tape rules - add nst to by-path/ links
-      udevadm: info - add --export format to --device-id-of-file=
-      move default rules from /etc/udev/rules.d/ to /lib/udev/rules.d/
-
-Marco d'Itri (7):
-      rules_generator: net rules - do not print error if file is missing and ignore commented rules
-      man: add link_priority default value
-      scsi_id: man page fix
-      udevadm: settle - add verbose output when running into timeout
-      rules: Debian update
-      rules: Debian update
-      ignore rule with GOTO to a non-existent label
-
-Thomas Koeller (1):
-      scsi_id: include sys/stat.h
-
-Tobias Klauser (1):
-      collect: check realloc return value
-
-
-Summary of changes from v123 to v124
-============================================
-
-Kay Sievers (1):
-      cdrom_id: fix recognition of blank media
-
-
-Summary of changes from v122 to v123
-============================================
-
-Erik van Konijnenburg (3):
-      add substitution in MODE= field
-      Makefile: use udevdir in "make install"
-      volume_id: support for oracleasm
-
-Harald Hoyer (1):
-      scsi_id: retry open() on -EBUSY
-
-Karel Zak (2):
-      volume_id: remove unnecessary global variable
-      volume_id: enable GFS probing code, add LABEL support
-
-Kay Sievers (5):
-      edd_id: call it only for sd* and hd*
-      rename WAIT_FOR_SYSFS to WAIT_FOR and accept an absolute path
-      rules: tape rules - use bsg device nodes for SG_IO
-      rules: persistent net - handle "locally administered" ibmveth MAC addresses
-      cdrom_id: export ID_CDROM_MEDIA_TRACK_COUNT_AUDIO=, ID_CDROM_MEDIA_TRACK_COUNT_DATA=
-
-Michal Soltys (1):
-      man: add NAME== match entry
-
-Xinwei Hu (2):
-      collect: realloc buffer, if needed
-      udevd: export .udev/queue/$seqnum before .udev/uevent_seqnum
-
-
-Summary of changes from v121 to v122
-============================================
-
-Hannes Reinecke (2):
-      scsi_id: remove all sysfs dependencies
-      scsi_id: add SGv4 support
-
-Karel Zak (1):
-      volume_id: clean up linux_raid code
-
-Kay Sievers (8):
-      scsi_id:  update man page
-      scsi_id: remove bus_id option
-      scsi_id: add --sg-version= option
-      rules: adapt to new scsi_id
-      rules: adapt tape rules to new scsi_id
-      scsi_id: add bsg.h
-      volume_id: bump version
-      Makefile: do not create udevcontrol, udevtrigger symlinks
-
-MUNEDA Takahiro (2):
-      man: udevd- fix udev(8) reference
-      man: scsi_id
-
-Matthias Schwarzott (1):
-      cdrom_id: fix segfault
-
-
-Summary of changes from v120 to v121
-============================================
-
-Damjan Georgievski (1):
-      libvolume_id: recognize swap partitions with a tuxonice hibernate image
-
-Daniel Drake (1):
-      writing udev rules: fix rule typos
-
-David Woodhouse (1):
-      rules_generator: net rules - add "dev_id" value to generated rules
-
-Harald Hoyer (1):
-      selinux: more context settings
-
-Kay Sievers (21):
-      udevinfo: do not replace chars when printing ATTR== matches
-      vol_id: add --offset option
-      cdrom_id: replace with version which also exports media properties
-      udevd: at startup write message including version number to kernel log
-      rules_generator: net rules - always add KERNEL== match to generated rules
-      selinux: fix missing includes
-      allow setting of MODE="0000"
-      path_id: remove subsystem whitelist
-      logging: add trailing newline to all strings
-      scsi_id: initialize serial strings
-      persistent device naming: also read unpartitioned media
-      cdrom_id: add more help text
-      add $links substitution
-      fstab_import: add program to IMPORT matching fstab entry
-      add OPTIONS+="event_timeout=<seconds>"
-      write "event_timeout" to db
-      udevadm: trigger - add --env= option
-      udevadm: control - fix --env key to accept --env=<KEY>=<value>
-      udevadm: info - do not print ATTR{dev}==
-      persistent device naming: update tape rules
-      rules: update md rules
-
-
-Summary of changes from v119 to v120
-============================================
-
-Kay Sievers (9):
-      test: remove duplicated EXTRA entry
-      rules: remove last WAIT_FOR_SYSFS, load ppdev, switch scsi_device
-      udevadm: trigger - option to synthesize events and pass them to a socket
-      udevadm: info - resolve devpath if symlink is given
-      udevadm: remove old man page links and compat links for debugging tools
-      udevadm: trigger - fix broken socket option check
-      udevadm: trigger - fix --socket== + --verbose
-      also accept real socket files for RUN+="socket:<path>"
-      persistent device naming: cleanup storage rules
-
-Michael Kralka (1):
-      udevd: serialize events if they refer to the same major:minor number
-
-
-Summary of changes from v118 to v119
-============================================
-
-Anthony L. Awtrey (1):
-      do not skip RUN execution if device node removal fails
-
-Harald Hoyer (2):
-      rules: Fedora update
-      rules: do not set GROUP="disk" for scanners
-
-Jiri Slaby (1):
-      rules_generator: add missing write_net_rules unlock
-
-Karel Zak (2):
-      volume_id: fix UUID raw buffer usage
-      volume_id: fix typo in function documentation
-
-Kay Sievers (10):
-      switch mailing lists to linux-hotplug@vger.kernel.org
-      rules: remove tty rule which can never run because of an earlier "last_rule"
-      volume_id: update ext detection
-      selinux: set context for real file name not the temp name
-      hack to allow ATTR{block/*/uevent}="change"
-      rules_generator: add KERNEL=="<netifname>*" to generated rules
-      persistent device naming: also run on "change" event
-      test: add "subsystem" links to all devices
-      sysfs: depend on "subsystem" link
-      extend hack to allow TEST=="*/start"
-
-Matthias Schwarzott (1):
-      volume_id: respect LDFLAGS
-
-Neil Williams (1):
-      volume_id: add prefix=, exec_prefix=
-
-Roy Marples (1):
-      Makefile: do not require GNU install
-
-
-Summary of changes from v117 to v118
-============================================
-
-Daniel Drake (1):
-      doc: update "writing udev rules"
-
-Hannes Reinecke (1):
-      volume_id: LVM - add uuid
-
-Kay Sievers (9):
-      remove udevstart
-      rules_generator: do not create rules with insufficient matches
-      man: udevadm settle - mention 180 seconds default timeout
-      libvolume_id: squashfs - add endianess support for LZMA compression
-      rules: add AOE rule
-      volume_id: md - add metadata minor version
-      volume_id: run only once into a timeout for unreadable devices
-      create_floppy_devices: fix logic for more than one floppy device
-      volume_id: also add readable check to probe_all()
-
-Matthias Schwarzott (1):
-      rules: Gentoo update
-
-Michael Prokop (1):
-      libvolume_id: squashfs+LZMA compression detection
-
-
-Summary of changes from v116 to v117
-============================================
-
-Dan Nicholson (2):
-      extras: ignore built and generated files
-      volume_id: create relative symlink when $(libdir) = $(usrlibdir)
-
-Kay Sievers (15):
-      usb_id: fail if vendor/product can not be retrieved
-      rules: SUSE update
-      firmware: do not print error if logger is missing
-      volume_id: vfat - allow all possible sector sizes
-      volume_id: LUKS - export version
-      volume_id: ntfs - rely on valid master file table
-      volume_id: bump version
-      udevinfo: exclude "uevent" file from --attribute-walk
-      udevadm: merge all udev tools into a single binary
-      udevadm: accept command as option, like --help, --version
-      udevadm: add info option --device-id-of-file=<file>
-      Makefile: fix bogus version number than got committed
-      udevadm: also return major==0 results for --device-id-of-file
-      man: udevd.8 - remove udevcontrol section
-      udevadm: control - allow command to be passed as option
-
-MUNEDA Takahiro (1):
-      man: fix udevadm.8 typo
-
-Matthias Schwarzott (2):
-      firmware: remove hardcoded path to logger
-      rules: Gentoo update
-
-VMiklos (1):
-      rules: Frugalware update
-
-
-Summary of changes from v115 to v116
-============================================
-
-Bryan Kadzban (1):
-      rules: fix typos
-
-Harald Hoyer (3):
-      check line length after comment check and whitespace strip
-      only install *.rules
-      remove extra space from udevinfo symlink output
-
-Kay Sievers (29):
-      rules: fix two trivial typos
-      rules: random and urandom are 0666
-      rules: add REMOVE_CMD rule
-      track "move" events to rename database and failed files
-      rules: Gentoo update
-      rules: add i2o driver rule
-      man: recreate man pages
-      volume_id: fix linux_raid metadata version 1.0 detection
-      add $name substitution
-      do not delete the device node with ignore_remove, but handle the event
-      print warning for invalid TEST operations
-      rules: do not delete /lib/udev/devices/ nodes on "remove"
-      rules: remove broken nvram group assignment without any permission
-      add /dev/rtc symlink if new rtc drivers are used
-      increase WAIT_FOR_SYSFS timeout to 10 seconds
-      rules: put bsd nodes in /dev/bsd/ directory
-      path_id: fix for stacked class devices
-      ignore device node names while restoring symlinks from the stack
-      use SEQNUM in /dev/.udev/queue/ instead of devpath
-      rules: add memstick module loading
-      udevinfo: simplify symlink printing logic
-      prevent wrong symlink creation if database disagress with current rules
-      fix wrong variable used in logged string
-      update README
-      rule_generator: move all policy from write_net_rules to the rules file
-      rules: call usb_id only for SUBSYSTEMS=="usb"
-      rules: split out and fix persistent tape rules
-      fix debug output string
-      rule_generator: always match netif type in generated rule
-
-Matthias Schwarzott (3):
-      rules: Gentoo update
-      rules: Gentoo update
-      rules: Gentoo update
-
-Michael Morony (1):
-      set buffer size if strlcpy/strlcat indicate truncation
-
-maximilian attems (1):
-      correct includes in udev_selinux.c
-
-
-Summary of changes from v114 to v115
-============================================
-
-Harald Hoyer (1):
-      rules: fix typo in 80-drivers.rules
-
-Kay Sievers (15):
-      rules: add default rules
-      rules: update SUSE rules
-      rules: add packages rules
-      rules: add ia64 rules
-      rules: move md-raid rules to packages dir
-      rules: run vol_id only for partitions
-      rules: update Fedora rules
-      edd_id: move persistent rules to its own file
-      accept relative path for TEST
-      rules: add iowarrior rule
-      volume_id: fix sqashfs detection
-      do not ignore dynamic rule if it is the last one in the list
-      rule_generator: fix wrong DRIVERS!= logic
-      rules: update Fedora
-      Makefile: install default rules
-
-Marco d'Itri (3):
-      rules_generator: remove policy from write_cd_rules
-      rules_generator: fix write_cd_rules when similar names exist in the root directory
-      rules: Debian update
-
-
-Summary of changes from v113 to v114
-============================================
-
-Hannes Reinecke (3):
-      collect: extra to synchronize actions across events
-      add $driver subtitution
-      rules_generator: add S/390 persistent network support
-
-Kay Sievers (24):
-      rules_generator: remove executable flag from include file
-      always unlink temporary file before creating new one
-      rules: SUSE update
-      volume_id: ext4 detection
-      udevtrigger: allow to specify action string
-      add option to RUN key to ignore the return value of the program
-      use global udev_log variable instead of parameter in run_program
-      add udev_rules_run() to handle RUN list
-      move udev_utils_run.c into udev_rules.c
-      rules: SUSE update
-      name_list: rename loop_name -> name_loop
-      handle dynamic rules created in /dev/.udev/rules.d/
-      allow SYMLINK== match
-      libvolume_id: use /usr/$libdir in pc file
-      Makefile: add --as-needed flag to ld
-      restore behavior of NAME==
-      rules_generator: remove "installation" function
-      udevtrigger: trigger "driver" events
-      rules: update SUSE
-      rules: Fedora update
-      rules: add "do not edit" comment
-      rules: Fedora update
-      rules_generator: skip random MAC addresses
-      write changed network interface names to the kernel log
-
-Matthias Schwarzott (3):
-      rules: Gentoo update
-      fix inotify to work not only once
-      rules: Gentoo update
-
-Richard Hughes (1):
-      Makefile: add "make dist" for nightly snapshots
-
-
-Summary of changes from v112 to v113
-============================================
-
-David Zeuthen (1):
-      vol_id: do not fail if unable to drop privileges
-
-Kay Sievers (12):
-      add missing ChangeLog
-      make ATTR{[$SUBSYSTEM/$KERNEL]<attr>}="<value>" working
-      rules: recognize partitions and disk devices properly
-      rules: SUSE update
-      atomically replace existing nodes and symlinks
-      do not try to create existing file
-      info() for ignore_remove
-      rules: SUSE update
-      Makefile: check for missing ChangeLog or RELEASE-NOTES at release
-      allow to disable the replacement of unusual characters
-      no newline in log messages
-      udevd: do not use syslog if --verbose (debugging) is used
-
-Tobias Klauser (1):
-      fix typo in udev_utils_run.c
-
-
-Summary of changes from v111 to v112
-============================================
-
-Fabio Massimo Di Nitto (1):
-      rules: ignore partitons that span the entire disk
-
-Hannes Reinecke (1):
-      cciss device support
-
-Kay Sievers (34):
-      udevd: close /proc/meminfo after reading
-      create_floppy_devices: remove dead "unlink" code
-      volume_id: add function documentation
-      udev_db: escape path names with \x00 instead of %00
-      udevsettle: use long options
-      replace_chars: replace spaces in node name
-      volume_id: add and export string encoding function
-      vol_id: export encoded strings
-      rules: use encoded strings instead of skipping characters
-      udevtest: print message before log output
-      volume_id: escape % character
-      replace_chars: replace % character
-      IMPORT: do not mangle whitespace
-      scsi_id: do not install symlink in /sbin
-      rules: SUSE update
-      volume_id: terminate overlong label strings
-      scsi_id: add long options
-      rules: use long options for scsi_id
-      path_id: skip subsystem directory
-      rules: fix cciss rule
-      rules: SUSE update
-      scsi_id: fix typo in help text
-      fix "do not access parent" warning for ATTR{}
-      sysfs: add device lookup by $SUBSYSYTEM:$KERNEL
-      events for "bus" and "class" registration must be matched as "subsystem"
-      udevtest: add --subsystem option
-      sysfs: change order of subsystem lookup
-      add $sys substitution
-      add TEST=="<file>" key
-      add "[$SUBSYSTEM/$KERNEL]<attribute>" lookup
-      sysfs: handle bus/class top-level directories
-      sysfs: skip unknown sysfs directories
-      rules: SUSE update
-      release 112
-
-Miklos Vajna (2):
-      create_floppy_devices: add man page
-      path_id: remove on make uninstall
-
-Ryan Lortie (1):
-      volume_id: support for long-filename based labels
-
-Scott James Remnant (2):
-      replace_untrusted_chars: replace all whitespace with space
-      run_program: log "info" not "error" if program is missing
-
-
-Summary of changes from v110 to v111
-============================================
-
-Kay Sievers (19):
-      rules: SUSE update
-      rules: Fedora update
-      volume_id: use md native uuid format
-      vol_id: use long options
-      volume_id: add volume_id_get_* functions
-      vol_id: use volume_id_get_*
-      udevd: use fgets() to read /proc files
-      volume_id: add internal UUID_STRING
-      volume_id: add DDF support
-      vol_id: README update
-      volume_id: rename UUID_64BIT_LE/BE
-      vol_id: add ID_FS_UUID_SAFE
-      rules: use ID_FS_UUID_SAFE
-      rules: SUSE update
-      volume_id: give access to list of all available probers
-      vol_id: use libvolume_id prober list for --probe-all
-      volume_id: add remaining names for prober lookup by type
-      rules: SUSE update
-      volume_id: vol_id depends on libvolume_id
-
-Matthias Schwarzott (2):
-      volume_id: fix Makefile for parallel make
-      rules: Gentoo update
-
-
-Summary of changes from v109 to v110
-============================================
-
-Harald Hoyer (1):
-      udevcontrol: allow to set global variables in udevd
-
-Kay Sievers (13):
-      remove eventrecorder.sh
-      update SUSE rules
-      volume_id: add md metadata 1.0, 1.1, 1.2 support
-      unset variable with ENV{VAR}=""
-      delete copies of default rules in SUSE rules
-      volume_id: ext - fix endianess in version number
-      rules: Fedora update
-      volume_id: old md metadata has only 32 bit for the uuid
-      volume_id: minix version 3 support
-      don't create $tempnode for devices without major
-      usb_id: add <devpath> to help text
-      ata_id: use getopt_long()
-      rules: SUSE update
-
-Matthias Schwarzott (3):
-      Makefile: respect CFLAGS/LDFLAGS
-      rules: Gentoo update
-      ata_id: don't log error for libata devices on older kernels
-
-
-Summary of changes from v108 to v109
-============================================
-
-Harald Hoyer (1):
-      create_floppy_devices: create nodes with correct selinux context
-
-Kay Sievers (11):
-      udevtest: export ACTION string if given as option
-      update SUSE rules
-      make ACTION!="add|change" working
-      udevtest: import uevent variables if possible
-      udevinfo: export all information stored in database
-      default rules: add libata compat links
-      create_path: don't fail if something else created the directory
-      udevd: fix serialization of events
-      path_id: remove broken example
-      libvolume_id: do not install static library
-      update SUSE rules
-
-Matthias Schwarzott (2):
-      update Gentoo rules
-      persistent device naming: add joystick links
-
-VMiklos (1):
-      path_id: add man page
-
-
-Summary of changes from v107 to v108
-============================================
-
-Kay Sievers (3):
-      udevinfo: relax check for the correct device if looked up by name
-      don't write to sysfs files during test run
-      finally remove the directory event-multiplexer crap
-
-Matthias Schwarzott (2):
-      write_cd_rules: set default link type to "by-id" for usb and ieee1394 devices
-      update Gentoo rules
-
-Pozsar Balazs (1):
-      udevsettle: read udev not kernel seqnum first
-
-
-Summary of changes from v106 to v107
-============================================
-
-Jean Tourrilhes (1):
-      udevtest: export UDEV_LOG if we changed it
-
-Kay Sievers (33):
-      man: add missing options to various man pages
-      man: fix typo
-      create_floppy_devices: apply specified mode without umask
-      man: spelling fixes
-      udevmonitor: add switch for kernel and udev events
-      default rules: wait for 0:0:0:0 scsi devices only
-      update Fedora rules
-      delete dasd_id, it moved to s390-tools
-      update Gentoo rules
-      encode db-file names, instead of just replacing '/'
-      update internal variables if we see $DEVPATH during IMPORT
-      increase /proc/stat buffer
-      maintain index over device-names to devpath relation
-      restore overwritten symlinks when the device goes away
-      store devpath with the usual leading slash
-      add link_priority to rule options, and store it in database
-      pick actual valid device in udev_db_lookup_name
-      cleanup already existing db-entries and db-index on device update
-      selinux: move selinux_exit() to the main programs
-      remove old error message
-      read list of devices from index, make index private to database
-      priority based symlink handling
-      volume_id: get rid of compiler warning
-      udevinfo: remove -d option
-      update %n on netif name change
-      if a node goes away, possibly restore a waiting symlink
-      update TODO
-      man: add "link_priority" option
-      update SUSE rules
-      udevtest: add --force mode
-      udevinfo: print link priority
-      usb_id: append target:lun to storage device serial
-      run_directory: add final warning before removal
-
-Marco d'Itri (1):
-      update Debian rules
-
-Matthias Schwarzott (2):
-      udevd: cleanup std{in,our,err} on startup
-      udevmonitor: fix swapped event switch descriptions
-
-
-Summary of changes from v105 to v106
-============================================
-
-A. Costa (1):
-      man: fix typos in scsi_id and udevd
-
-Andrey Borzenkov (2):
-      vol_id: add -L to print raw partition label
-      vol_id: document -L
-
-Jamie Wellnitz (1):
-      persistent device naming: tape devices and medium changers
-
-Kay Sievers (15):
-      exclude parent devices from DRIVER== match
-      volume_id: really fix endianess bug in linux_raid detection
-      release 105
-      man: correct udevinfo --export-db
-      path_id: append LUN to iSCSI path
-      create_floppy_devices: add option for owner/group
-      update example rules
-      apply format chars to ATTR before writing to sysfs
-      add (subsystem) to udevmonitor output
-      update DRIVER== changes
-      remove --version from the udevinfo man page
-      add test for an attribute which contains an operator char
-      man: add note about parent matching behavior
-      scsi_id: accept tabs in /etc/scsi_id.conf
-      remove dead rule in persistent tape rules
-
-Matthias Schwarzott (4):
-      correct typo in extras/scsi_id/scsi_id.conf
-      fix retry-loop in netif-rename code
-      add option --version to udevd
-      rule_generator: fix for creating rules on read-only filesystem
-
-Peter Breitenlohner (1):
-      fix INSTALL_PROGRAM vs. INSTALL_SCRIPT
-
-Sergey Vlasov (3):
-      udevd: init signal pipe before daemonizing
-      unlink old database file before creating a new one
-      fix %c $string substitution
-
-Theodoros V. Kalamatianos (1):
-      fix udev attribute names with a colon
-
-
-Summary of changes from v104 to v105
-============================================
-
-A. Costa (1):
-      man: fix typos in scsi_id and udevd
-
-Andrey Borzenkov (2):
-      vol_id: add -L to print raw partition label
-      vol_id: document -L
-
-Kay Sievers (2):
-      exclude parent devices from DRIVER== match
-      volume_id: really fix endianess bug in linux_raid detection
-
-Matthias Schwarzott (2):
-      correct typo in extras/scsi_id/scsi_id.conf
-      fix retry-loop in netif-rename code
-
-Peter Breitenlohner (1):
-      fix INSTALL_PROGRAM vs. INSTALL_SCRIPT
-
-Sergey Vlasov (3):
-      udevd: init signal pipe before daemonizing
-      unlink old database file before creating a new one
-      fix %c $string substitution
-
-
-Summary of changes from v103 to v104
-============================================
-
-Kay Sievers (12):
-      update Fedora rules
-      update example rules
-      update SUSE rules
-      update SUSE rules
-      volume_id: fix endianess bug in linux_raid detection
-      man: fix udevmonitor text
-      man: recreate from xml
-      rename config "filename" to "dir"
-      remove outdated documentation
-      rename "udev.c" to "test-udev.c" - it is only for testing
-      update Fedora rules
-      use git-archive instead of git-tar-tree
-
-Kazuhiro Inaoka (1):
-      inotify syscall definitions for M32R
-
-Marco d'Itri (2):
-      write_cd_rules: identity-based persistence
-      scsi_id: remove trailing garbage from ID_SERIAL_SHORT
-
-Russell Coker (1):
-      SELinux: label created symlink instead of node
-
-
-Summary of changes from v102 to v103
-============================================
-
-Kay Sievers:
-      persistent storage rules: skip gnbd devices
-      volume_id: add checksum check to via_raid
-      volume_id: add comment about hfs uuid conversion
-      update SUSE rules
-      update Fedora rules
-
-
-Summary of changes from v101 to v102
-============================================
-
-Daniel Drake:
-      writing_udev_rules: fix typo in example rule
-
-Kay Sievers:
-      create missing ChangeLog for version 101
-      update SUSE rules
-      update default rules
-      first try "subsystem" link at a parent device, before guessing
-      if /sys/subsystem exists, skip class, bus, block scanning
-      scsi_id: export ID_SERIAL_SHORT without vendor/product
-      update SUSE rules
-
-MUNEDA Takahiro:
-      path_id: fix SAS disk handling
-
-
-Summary of changes from v100 to v101
-============================================
-
-Arjan Opmeer:
-      fix udevinfo help text typo
-
-Bryan Kadzban:
-      cleanup default rules
-      add IMPORT operations to the udev man page
-
-Kay Sievers:
-      remove Makefile magic for leading '0' in version
-      udevd: use getopt_long()
-      udevd: add --verbose option to log also to stdout
-      udevd: add --debug-trace option
-      rule_generator: improve net rule comment generation
-      volume_id: correct iso9660 high sierra header
-      warn if a PHYSEDV* key, the "device" link, or a parent attribute is used
-      don't print PHYSDEV* warnings for old WAIT_FOR_SYSFS rules
-      udevinfo: print error in --attribute-walk
-      udev_sysfs: unify symlink resolving
-      udevtrigger: trigger devices sorted by their dependency
-      fix spelling in deprecation warning
-      release 101
-
-Michał Bartoszkiewicz:
-      udevtrigger: fix typo that prevents partition events
-
-Miles Lane:
-      clarify "specified user/group unknown" error
-
-Piter PUNK:
-      update slackware rules
-
-VMiklos:
-      update Frugalware rules
-
-
-Summary of changes from v099 to v100
-============================================
-
-Kay Sievers:
-      update SUSE rules
-      fix messed up ChangeLog from release 099
-      man: add $attr{} section about symlinks
-      revert persistent-storage ata-serial '_' '-' replacement
-
-
-Summary of changes from v098 to v099
-============================================
-
-Greg KH:
-      update Gentoo rules
-
-Kay Sievers:
-      udev_db.c: include <sys/stat.h>
-      use fnmatch() instead of our own pattern match code
-      rename major/minor variable to maj/min to avoid warning
-      update source file headers
-      udevtest: print header that ENV{} can't work
-      update TODO
-      udevtrigger: options to filter by subsystem and sysfs attribute
-      udevtrigger: remove unused longindex
-      udevinfo: use long options
-      udevd: use files instead of symlinks for /dev/.udev/queue,failed
-      udevtrigger: fix pattern match
-      reorder options in udevinfo man page
-      udevinfo: fix SUBSYTEMS spelling error
-      fix ENV{TEST}="Test: $env{TEST}"
-      let $attr{symlink} return the last element of the path
-      cdrom_id: add rules file to call cdrom_id
-      udevinfo: do not show symlinks as attributes in --attribute-walk
-      remove broken name_cdrom.pl
-
-Marco d'Itri:
-      update Debian rules
-      run_program: close pipe fd's which are connected to child process
-      add persistent rules generator for net devices and optical drives
-
-MUNEDA Takahiro:
-      changes rules for ata disk from '_' to '-'
-
-Sergey Vlasov:
-      make struct option arrays static const
-      fix "subsytem" typo
-
-
-Summary of changes from v097 to v098
-============================================
-
-Alex Merry:
-      udevtest: allow /sys in the devpath paramter
-
-Harald Hoyer:
-      selinux: init once in the daemon, not in every event process
-
-Kay Sievers:
-      udevd: remove huge socket buffer on the control socket
-      man page: fix typo
-      rename udev_libc_wrapper -> udev_sysdeps
-      db: store devpath - node relationship for all devices
-      udevinfo: allow -a -n <node>
-      udevinfo, udevtest: simplify '/sys' stripping from devpath argument
-      lookup_user, lookup_group: report "unknown user" and "lookup failed"
-      consistent key naming to match only the event device or include all parent devices
-      skip rule, if too may keys of the same type are used
-      introduce ATTR{file}="value" to set sysfs attributes
-      update SUSE rules
-      update default rules
-      export DRIVER for older kernels as a replacement for PHYSDEVDRIVER
-      fix typo in SUBSYSTEMS key parsing
-      udevtrigger: add --retry-failed
-      volume_id: add suspend partition detection
-      vol_id: use primary group of 'nobody' instead of 'nogroup'
-      remove built-in /etc/passwd /etc/group parser
-      always expect KEY{value} on ATTR, ATTRS, ENV keys
-      use new key names in test programs
-      cleanup commandline argument handling
-      db: don't create a db file for only a node name to store
-      man: add ATTR{file}="value" assignment
-
-Lennart Poettering:
-      volume_id: fix fat32 cluster chain traversal
-
-Marco d'Itri:
-      fix 'unknow user' error from getpwnam/getgrnam
-      fix rc when using udev --daemon
-      update Debian rules
-
-Michał Bartoszkiewicz:
-      man pages: fix typos
-
-
-Summary of changes from v096 to v097
-============================================
-
-Anssi Hannula:
-      add joystick support to persistent input rules
-
-Kay Sievers:
-      firmware.sh: remove needless '/'
-      vol_id: add --skip-raid and --probe-all option
-      switch uevent netlink socket to group 1 only
-      increase /proc/stat read buffer
-      use "change" instead of "online" events
-      remove 'static' from local variable
-      libvolume_id: add parameter 'size' to all probe functions
-      man pages: replace 'device-path' by 'devpath'
-      man pages: work around xmlto which tries to be smart
-      refresh vol_id man page
-      udevinfo: add DRIVER==
-      Makefile: fix dependency
-      libvolume_id: read ufs2 label
-      switch ifdef __KLIBC__ to ifndef __GLIBC__
-      report failing getpwnam/getgrnam as error
-      rename udevcontrol message types and variables
-      initialize unused sockets to -1
-      udevd: remove useless udevinitsend parameter
-      update README
-      udevd: autotune max_childs/max_childs_running
-      update frugalware rules
-      update SUSE rules
-      move default rules to etc/udev/rules.d/
-      add 'crypto' devices to persistent storage rules
-      add late.rules to default rules
-      update Fedora rules
-      don't report an error on overlong comment lines
-      update SUSE rules
-      udevd: read DRIVER from the environment
-
-Marco d'Itri:
-      make rename_netif() error messages useful
-      path_id: fix an harmless syntax error
-
-Piter PUNK:
-      update slackware rules
-
-Richard Purdie:
-      Fix inotify syscalls on ARM
-
-
-Summary of changes from v095 to v096
-============================================
-
-Kay Sievers:
-      Makefiles: fix .PHONY for man page target
-      allow longer devpath values
-      path_id: prepare for new sysfs layout
-
-
-Summary of changes from v094 to v095
-============================================
-
-Kay Sievers:
-      update SUSE rules
-      don't remove symlinks if they are already there
-      allow "online" events to create/update symlinks
-      udevinfo: clarify parent device attribute use
-      update SUSE rules
-      netif rename: optimistic loop for the name to become free
-      remove broken %e enumeration
-
-Tobias Klauser:
-      print usage of udevcontrol when no or invalid command is given
-
-
-Summary of changes from v093 to v094
-============================================
-
-Daniel Drake:
-      update "writing udev rules"
-
-Kay Sievers:
-      libvolume_id: gfs + gfs2 support
-      remove MODALIAS key and substitution
-      add persistent-input.rules
-
-Marco d'Itri:
-      update Debian rules
-
-
-Summary of changes from v092 to v093
-============================================
-
-Hannes Reinecke:
-      path_id: add support for iSCSI devices
-
-Kay Sievers:
-      libvolume_id: fat - check for signature at end of sector
-      libvolume_id: add more software raid signatures
-      update Fedora rules
-      path_id: prevent endless loop for SAS devices on older kernels
-      remove udevsend
-      replace binary firmware helper with shell script
-      skip device mapper devices for persistent links
-
-
-Summary of changes from v091 to v092
-============================================
-
-Kay Sievers:
-      don't include stropts.h, some libc's don't like it
-      udevd: create leading directories for /dev/.udev/uevent_seqnum
-      vol_id: fix logging from libvolume_id's log function
-      update SUSE rules
-      update SUSE rules
-      add more warnings for invalid key operations
-      fix offsetof() build issue with recent glibc
-      selinux: fix typo in block device node selection
-      vol_id: add NetWare volume detection
-      edd_id: fix "(null)" output if "mbr_signature" does not exist
-      update Fedora rules
-      libvolume_id: nss - use different uuid
-
-Libor Klepac:
-      path_id: add platform and serio support
-
-Marco d'Itri:
-      update Debian rules
-      path_id: fix bashism
-
-
-Summary of changes from v090 to v091
-============================================
-
-Hannes Reinecke:
-      path_id: fix SAS device path generation
-
-Kay Sievers:
-      udevtest: don't try to delete symlinks
-      persistent rules: fix typo in dm rule
-      allow NAME=="value" to check for already assigned value
-      udevd: export initial sequence number on startup
-
-
-Summary of changes from v089 to v090
-============================================
-
-Kay Sievers:
-      udevd: export current seqnum and add udevsettle
-      volume_id: fix endianess conversion typo for FAT32
-      merge device event handling and make database content available on "remove"
-      set default udevsettle timeout to 3 minutes
-      export INTERFACE_OLD if we renamed a netif
-      let udevmonitor show the possibly renamed devpath
-      volume_id: move some debug to info level
-      udevtrigger: fix event order
-      usb_id: remove uneeded code
-      remove old symlinks before creating current ones
-      path_id: fix loop for SAS devices
-      apply format char to variables exported by ENV
-
-Marco d'Itri:
-      add inotify support for hppa and MIPS and log if inotify is not available
-
-Matt Kraai:
-      fix typo in error message
-
-
-Summary of changes from v088 to v089
-============================================
-
-Hannes Reinecke:
-      path_id: add bus to USB path
-
-Kay Sievers:
-      change rule to skip removable IDE devices
-      don't create uuid/label links for raid members
-      volume_id: provide library
-      fix rule order for persistent tape links
-      update man page
-      volume_id: provide a custom debug function
-      volume_id: rename subdirectory
-      volume_id: use shared library by default
-      because is better than cause
-      volume_id: remove some global symbols
-      volume_id: define exported symbols
-      remove all stripping code
-      man pages: mention udev(7) not udev(8)
-      update Debian rules
-      move all *_id programs to /lib/udev/
-      update Red Hat rules
-      update SUSE rules
-      pass CROSS_COMPILE to AR and RANLIB down to extras/
-      volume_id: update README
-      volume_id: generate man page from xml source
-      update README
-      fix symlink targets in Makefiles
-
-
-Summary of changes from v087 to v088
-============================================
-
-Hannes Reinecke:
-      persistent links: add scsi tape links and usb path support
-
-Kay Sievers:
-      volume_id: add squashfs detection
-      reset signal handler in event process
-      correct use of fcntl()
-      add udevtrigger to request events for coldplug
-      add ',' to trusted chars
-      volume_id: remove partition table parsing code
-      volume_id: remove all partition table support
-      fix spelling error in debug string
-      rename "persistent disk" to "persistent storage"
-      fix output for USB path
-
-
-Summary of changes from v086 to v087
-============================================
-
-Hannes Reinecke:
-      path_id: support SAS devices
-
-Kay Sievers:
-      fix persistent disk rules to exclude removable IDE drives
-      warn about %e, MODALIAS, $modalias
-      remove devfs rules and scripts
-
-Masatake YAMATO:
-      typo in debug text in udev_run_hotplugd.c
-
-
-Summary of changes from v085 to v086
-============================================
-
-Kay Sievers:
-      volume_id: replace __packed__ by PACKED macro
-      volume_id: split raid and filesystem detection
-      volume_id: add missing return
-      udevd: fix queue export for multiple events for the same device
-
-Kyle McMartin:
-      workaround missing kernel headers for some architectures
-
-Nix:
-      update to udev-084/doc/writing_udev_rules
-
-
-Summary of changes from v084 to v085
-============================================
-
-Andrey Borzenkov:
-      Fix trivial spelling errors in RELEASE-NOTES
-
-Jeroen Roovers:
-      fix typo in parisc support to path_id
-
-Kay Sievers:
-      make WAIT_FOR_SYSFS usable in non "wait-only" rules
-      fix typo in man page
-      include sys/socket.h for klibc build
-      cramfs detection for bigendian
-      exit WAIT_FOR_SYSFS if the whole device goes away
-      update SUSE rules
-      update Red Hat rules
-      update Gentoo rules
-      include errno.h in udev_libc_wrapper.c
-
-
-Summary of changes from v083 to v084
-============================================
-
-Kay Sievers:
-      update SUSE rules
-      switch CROSS to CROSS_COMPILE
-      replace fancy silent build program by simple kernel build like logic
-      move manpages to top level
-      remove UDEVD_UEVENT_INITSEND
-      whitespace fixes
-      scsi_id: remove dead files
-      optimize sysfs device and attribute cache
-      let SYSFS{} look at the device, not only the parent device
-      add debug output to sysfs operations
-
-
-Summary of changes from v082 to v083
-============================================
-
-Andrey Borzenkov:
-      man page: document when substitutions are applied for RUN and other keys
-      check for ignore_device in loop looks redundant
-
-Kay Sievers:
-      udevstart: fix NAME="" which prevents RUN from being executed
-      find programs in /lib/udev for IMPORT if {program} is not given
-      don't add $SUBSYSTEM automatically as $1 to programs
-      remove redundant substitution of RUN key
-
-
-Summary of changes from v081 to v082
-============================================
-
-Andrey Borzenkov:
-      substitute format chars in RUN after rule matching
-
-Kay Sievers:
-      scsi_id, usb_id: request device parent by subsystem
-      path_id: work with "all devices in /sys/devices"
-      ignore all messages with missing devpath or action
-      Makefile: remove dynamic config file generation
-      path_id: handle fiber channel (Hannes Reinecke <hare@suse.de>)
-      usb_id: don't fail on other subsytems than "scsi"
-      don't do RUN if "ignore_device" is given
-      increase kernel uevent buffer size
-      move udev(8) manpage to udev(7)
-      recreate man pages from xml source
-      remove udev, udevstart, udevsend from the default installation
-      update SUSE rules
-      rename apply_format() cause it is public now
-      udevtest: add udev_rules_apply_format() to RUN keys
-      let "ignore_device" always return the event successfully
-
-Olivier Blin:
-      fixes udev build with -fpie
-
-
-Summary of changes from v080 to v081
-============================================
-
-Kay Sievers:
-      add DEVLINKS to "remove" event
-      better log text and comments
-      vol_id: probe volume as user nobody
-      fix BUS, ID, $id usage
-      prepare moving of /sys/class devices to /sys/devices
-
-
-Summary of changes from v079 to v080
-============================================
-
-Brent Cook:
-      fix dependency for make -j2
-
-coly:
-      fix man page typos
-
-Kay Sievers:
-      update RELEASE-NOTES + TODO
-      fix typo in man page
-      update TODO
-      update SUSE rules
-      path_id: fix invalid character class
-      replace libsysfs
-
-Marco d'Itri:
-      udev_selinux.c: include udev.h
-
-
-Summary of changes from v078 to v079
-============================================
-
-Kay Sievers:
-      don't log error if database does not exist
-      use udev_root instead of "/dev"in selinux matchpathcon_init_prefix()
-      scsi_id: read page 0x80 with libata drives
-      update SUSE rules
-      remove %e from man page
-
-
-Summary of changes from v077 to v078
-============================================
-
-Greg Kroah-Hartman:
-      Update Gentoo udev main rule file.
-      add parisc support to path_id
-
-Hannes Reinecke:
-      scsi_id: -u fold multiple consecutive whitespace chars into single '_'
-
-Harald Hoyer:
-      optimize SELinux path match
-
-Kay Sievers:
-      update README
-      allow C99 statements
-      fix segfaulting create_floppy_devices
-      update SUSE rules
-      remove unused variables
-      remove default settings in udev.conf
-      clearenv() is now part of klibc
-      add DEVLINKS to the event environment
-
-Kurt Garloff:
-      scsi_id: support pre-SPC3 page 83 format
-
-
-Summary of changes from v076 to v077
-============================================
-
-Kay Sievers:
-      merge two consecutive static strlcat's
-      don't return an error, if "ignore_device" is used
-      remove outdated and misleading stuff
-      move SEQNUM event skipping to udevsend
-      update RELEASE-NOTES
-      update SUSE rules
-      allow programs in /lib/udev called without the path
-      update SUSE rules
-      add target to to generate ChangeLog section
-      update Red Hat rules
-
-Marco d'Itri:
-      allow to overwrite the configured udev_root by exporting UDEV_ROOT
-      let udevsend ignore events with SEQNUM set
-      update Debian rules
-
-
-Summary of changes from v75 to v076
-============================================
-
-Kay Sievers:
-      fix typo in eventrecorder
-      volume_id: include stddef.h header
-      remove misleading install instructions
-      remove all built-in wait_for_sysfs logic
-      add linux/types.h back, old glibc-kernel-headers want it
-      volume_id: use glibc's byteswap
-      udevd: ignore all messages without DEVPATH
-      udevd: track exit status of event process
-      udevd: export event queue and event state
-      remove "udev_db" option from config file
-      Makefile: remove exec_prefix and srcdir
-      update README and RELEASE-NOTES
-      udevd: track killed event processes as failed
-      update README
-      don't start udevd from udevsend
-      udevd: add a missing return
-      libvolume_id: fix weird fat volume recognition
-      move some helpers from extras to /lib/udev
-
-Scott James Remnant:
-      move delete_path() to utils
-      clean-up empty queue directories
-      Makefile: fail, if submake fails
-
-
-Summary of changes from v74 to v075
-============================================
-
-Greg Kroah-Hartman:
-      Make run_directory.c stat the place it is going to try to run.
-
-Kay Sievers:
-      forgot the ChangeLog for 074
-      volume_id: provide libvolume_id.a file
-      remove our own copy of klibc
-      remove outdated HOWTO
-      update TODO
-      update SUSE rules
-      remove completely useless start script
-      fix tests and remove no longer useful stuff
-      replace udeveventrecorder by a shell script
-
-
-Summary of changes from v73 to v074
-============================================
-
-Kay Sievers:
-      never queue events with TIMEOUT set
-      let NAME="" supress node creation, but do RUN keys
-      remove udevinitsend
-      update .gitignore
-
-Marco d'Itri:
-      add strerror() to error logs
-      move some logging from dbg() to info()
-
-
-Summary of changes from v72 to v073
-============================================
-
-Kay Sievers:
-      udevd: depend on netlink and remove all sequence reorder logic
-      print useconds in udevmonitor
-      add RELEASE-NOTES, update TODO
-
-
-Summary of changes from v71 to v072
-============================================
-
-Ananth N Mavinakayanahalli:
-  libsysfs: translate devpath of the symlinked class devices to its real path
-
-Jan Luebbe:
-  add man pages for *_id programs
-
-Kay Sievers:
-  volume_id: add OCFS Version 1
-  volume_id: add Veritas fs
-  volume_id: check ext fs for valid blocksize, cause magic is only 2 bytes
-  volume_id: move blocksize validation to fix jbd recognition
-  volume_id: fix typo in ocfs
-  volume_id: add vxfs include
-  volume_id: make FAT32 recognition more robust
-  volume_id: Version 051
-  volume_id: fix typo in ext blocksize check
-  volume_id: Version 052
-  FAQ: remove confusing statement about module loading
-  cleanup compiler/linker flags
-  use DESTDIR on uninstall, no need to pass prefix to submake
-  allow to pass STRIPCMD, to skip stripping of binaries
-  cleanup make release
-  fix the new warnings I asked for
-  move rules parsing into daemon
-  "make STRIPCMD=" will disable the stripping of binaries
-  remove no longer working udevd-test program
-  "STRIPCMD=" for the EXTRAS
-  add dummy inotify syscalls on unsupported architecture
-  remove no longer needed waiting for "dev" file
-  revert the "read symlink as device patch"
-  use libsysfs to translate the class linke to the device path
-  libsysfs: remove brute-force "bus", "driver" searching for old kernels
-  test: add "driver" and "bus" links to test sysfs tree
-  update RELEASE-NOTES
-  udevd: don't daemonize before initialization
-  log to console if syslog is not available
-  udevd: disable OOM
-  remove precompiled rules option
-  export DEVNAME on "remove" only if we really got a node to remove
-  fix typo in umask()
-
-
-Summary of changes from v70 to v071
-============================================
-
-Greg Kroah-Hartman:
-      Remove the udev.spec file as no one uses it anymore
-
-John Hull:
-      edd_id: check that EDD id is unique
-
-Kay Sievers:
-      ata_id: open volume O_NONBLOCK
-      add "Persistent Device Naming" rules file for disks
-      scsi_id: switch temporary node creation to /dev
-      volume_id: set reiser instead of reiserfs for filesystem type
-      update devfs rules header
-      update Debian rules
-      update Fedora rules
-      update Debian rules
-      remove no longer needed includes
-      switch tools and volume_id from LGPL to GPLv2
-      add edd-*-part%n to the persistent.rules
-      update Debian persistent rules
-      clarify README
-      udevd: fix initial timeout handling
-      force event socket buffer size to 16MB
-      udevd: move logging from err to info for non-hotplug uevent
-      fix selinux compilation
-      libsysfs: accept sysmlinks to directories instead of real directories
-
-Marco d'Itri:
-      run_directory: fix typo in "make install"
-
-
-Summary of changes from v069 to v070
-============================================
-
-Amir Shalem:
-  udevd: fix udevd read() calls to leave room for null byte
-
-Edward Goggin:
-  scsi_id: derive a UID for a SCSI-2 not compliant with the page 83
-
-Greg Kroah-Hartman:
-  fix nbd error messages with a gentoo rule hack
-  fix scsi_id rule in gentoo config file
-
-Jürg Billeter:
-  EXTRAS/Makefile: fix install targets to match main Makefile
-
-Kay Sievers:
-  volume_id: fix error handling with failing read()
-  EXTRAS: cleanup and sync all Makefiles
-  add install test to 'make buildtest'
-  update RELEASE-NOTES
-
-Olivier Blin:
-  fix a debug text typo in udev_rules.c
-
-
-Summary of changes from v068 to v069
-============================================
-
-Amir Shalem:
-  fix typo in firmware_helper
-
-Duncan Sands:
-  firmware_helper: fix write count
-
-Kay Sievers:
-  *_id: fix zero length in set_str()
-  add program name to logged error
-  fix exit code of udevinitsend and udevmonitor
-  udevd: keep the right order for messages without SEQNUM
-  volume_id: don't probe for mac_partition_maps
-  udevmonitor: cleanup on exit
-  path_id: remove SUSE specific PATH
-  update SUSE rules
-  add pci_express to bus list
-  update SUSE rules
-  store ENV{key}="value" exported keys in the database
-  fix lookup for name in the udevdb, it should return the devpath
-  prepare for new HAL udevdb dump
-  print persistent data with "udevinfo -q all"
-  change parameter order of udev_db_search_name()
-  add and use name_list_cleanup() for cleaning up the string lists
-  don't store devpath in udevdb, we don't need it
-  add uft8 validation for safe volume label exporting
-  start to enforce plain ascii or valid utf8
-  use WRITE_END/READ_END for the pipe index
-  remove not needed sig_flag for state of signal_pipe
-  don't reenter get_udevd_msg() if message is ignored
-  rename ...trailing_char() to ...trailing_chars()
-  vol_id: ID_LABEL_SAFE will no longer contain fancy characters
-  udevd: move some logging to "info" and "err"
-  remove special TIMEOUT handling from incoming queue
-  udev_test.pl: we replace untrusted chars with '_'
-  check the udevdb before assigning a new %e
-  update RELEASE-NOTES
-  udevinfo: add database export
-  write man page masters in DocBook XML
-  udevinfo: rename dump() to export()
-  test the automatic man page rebuild and checkin
-  Makefile: remove all the duplicated rules
-  all man pages rewritten to use DocBook XML
-  add missing udevsend man page
-  also forgot udevmonitor.8
-  udevinfo: restore -d option
-  scsi_id: rename SYSFS to LIBSYSFS
-  add edd_id tool to match BIOS EDD disk information
-  move and update libsysfs.txt
-  klibc: update to version 1.1.1
-  delete cdromsymlinks* - obsoleted by cdrom_id and IMPORT rules
-  delete docs/persistent_naming - obsoleted by persistent disk names
-  delete old Fedora html page
-  add "totally outdated" header to docs/overview :)
-  update SUSE rules
-  fix useless but funny name_cdrom.pl script to work again
-  update TODO
-  Makefile: fix prerequisits for $(PROGRAMS)
-  Makefile: cleanup install targets
-  remove chassis_id program
-  fic gcov use and move it into the Makefile
-  FAQ: update things that have changed
-
-Thierry Vignaud:
-  switch to '==' in raid-devfs.sh
-
-
-Summary of changes from v067 to v068
-============================================
-
-Greg Kroah-Hartman:
-  add EXTRAS documentation to the README file.
-  Always open the cdrom drive in non-blocking mode in cdrom_id
-  cdrom_id: change err() to info() to help with debugging problems
-
-Kay Sievers:
-  cleanup some debug output and move to info level + unify select() loops
-  move udevmonitor to /usr/sbin
-  ENV{TEST}=="1" compares and ENV{TEST}="1" sets the environment
-  vol_id: fix sloppy error handling
-  fix typo in cdrom_id syslog
-  bring std(in|out|err) fd's in a sane state
-  fix printed udevmonitor header
-
-
-Summary of changes from v066 to v067
-============================================
-
-Greg Kroah-Hartman:
-  added the cdrom.h #defines directly into the cdrom_id.c file
-
-Kay Sievers:
-  update SUSE rules
-  fix make install, as we don't provide a default rule set anymore
-  fix more compiler warnings ...
-  fix udevstart event ordering, we want /dev/null very early
-  don't fail too bad, if /dev/null does not exist
-
-
-Summary of changes from v065 to v066
-============================================
-
-Greg Kroah-Hartman:
-  update gentoo rule file.
-  Created cdrom_id program to make it easier to determine cdrom types
-  added cdrom_id to the build check
-  updated gentoo rule file to handle removable ide devices.
-  changed cdrom_id exports to be easier to understand and consistant with other _id programs.
-  fix klibc build issue in cdrom_id.c
-  Change the gentoo rules to use cdrom_id instead of cdsymlink.sh
-  changed location of gentoo helper apps to be /sbin instead of in scripts dir
-  tweak the gentoo rules some more.
-
-Kay Sievers:
-  add NETLINK define for the lazy distros
-  read sysfs attribute also from parent class device
-  switch some strlcpy's to memcpy
-  allow clean shutdown of udevd
-  add flag for reading of precompiled rules
-  update distro rules files
-  add SUSE rules
-  update SUSE rules
-  add firmware_helper to load firmware
-  more distro rules updates
-  update README
-  remove example rules and put the dev.d stuff into the run_directory folder
-  trivial text cleanups
-  update SUSE rules
-  split udev_util in several files
-  update SUSE rules
-  allow logging of all output from executed tools
-  add Usage: to udevmonitor and udevcontrol
-  move some logging to the info level
-
-Thierry Vignaud:
-  fix udevinfo output
-
-
-Summary of changes from v064 to v065
-============================================
-
-Greg Kroah-Hartman:
-  Added persistent name rules for block devices to gentoo rule file.
-  Added horrible (but fun) path_id script to extras.
-  Update gentoo rules file.
-
-Kay Sievers:
-  update release notes for next version
-  add udevmonitor, to debug netlink+udev events at the same time
-  allow RUN to send the environment to a local socket
-  fix GGC signed pointer warnings and switch volume_id to stdint
-
-
-Summary of changes from v063 to v064
-============================================
-
-Andre Masella:
-  volume_id: add OCFS (Oracle Cluster File System) support
-
-Hannes Reinecke:
-  usb_id: fix typo
-  add ID_BUS to *_id programs
-  create_floppy_devices: add tool to create floppy nodes based on sysfs info
-
-Kay Sievers:
-  move code to its own files
-  make SYSFS{} usable for all devices
-  add padding to rules structure
-  allow rules to have labels and skip to next label
-  thread unknown ENV{key} match as empty value
-
-
-Summary of changes from v062 to v063
-============================================
-
-Anton Farygin:
-  fix typo in GROUP value application
-
-Greg Kroah-Hartman:
-  add 'make tests' as I'm always typing that one wrong...
-  Really commit the udev_run_devd changes...
-  Fixed udev_run_devd to run the /etc/dev.d/DEVNAME/ files too
-  fix position of raw rules in gentoo config file
-
-Hannes Reinecke:
-  dasd_id: add s390 disk-label prober
-  fix usb_id and let scsi_id ignore "illegal request"
-
-Kay Sievers:
-  volume_id: remove s390 dasd handling, it is dasd_id now
-  trivial fixes for *_id programs
-  IMPORT: add {parent} to import the persistent data of the parent device
-  allow multiple values to be matched with KEY=="value1|value2"
-  udevd: set incoming socket buffer SO_RCVBUF to maximum
-  remember mapped rules state
-  ata_id: check for empty serial number
-  compile dasd only on s390
-
-Ville Skyttä:
-  correct default mode documentation in udev
-
-
-Summary of changes from v061 to v062
-============================================
-
-Kay Sievers:
-  fix symlink values separated by multiple spaces
-  update RELEASE-NOTES
-  fix typo in group assignment
-  fix default-name handling and NAME="" rules
-  add WAIT_FOR_SYSFS key to loop until a file in sysfs arrives
-  fix unquoted strings in udevinitsend
-
-Summary of changes from v060 to v061
-============================================
-
-Greg Kroah-Hartman:
-  Sync up the Debian rules files
-  fix cdrom symlink problem in gentoo rules
-  Fix ChangeLog titles
-
-Kay Sievers:
-  update RELEASE-NOTES
-  we want to provide OPTFLAGS
-  rename ALARM_TIMEOUT to UDEV_ALARM_TIMEOUT
-  udevd: optimize env-key parsing
-  don't resolve OWNER, GROUP on precompile if string contains %, $
-  set default device node to /dev
-  create udevdb files only if somehting interesting happened
-  pack parsed rules list
-  replace useless defines by inline text
-  move rule matches to function
-  add usb_id program to generate usb-storage device identifiers
-  add IEEE1394 rules to the gentoo rule file
-  fake also kernel-name if we renamed a netif
-  allow OPTIONS to be recognized for /sys/modules /sys/devices events
-  switch gentoo rules to new operators
-
-
-Summary of changes from v059 to v060
-============================================
-
-Greg Kroah-Hartman:
-  Fix the gentoo udev rules to allow the box to boot properly
-
-Gustavo Zacarias:
-  Udev doesn't properly build with $CROSS
-
-Kay Sievers:
-  Keep udevstart from skipping devices without a 'dev' file
-
-Marco d'Itri:
-  #define NETLINK_KOBJECT_UEVENT
-
-
-Summary of changes from v058 to v059
-============================================
-
-Greg Kroah-Hartman:
-  Update the gentoo rule file
-  Fix udevinfo for empty sysfs directories
-  Fix makefile to allow 'make release' to work with git
-
-Hannes Reinecke:
-  udev: fix netdev RUN handling
-  udevcontrol: fix exit code
-
-Kay Sievers:
-  prepare RELEASE-NOTES
-  add ID_TYPE to the id probers
-  add -x to scsi_id to export the queried values in env format
-  store the imported device information in the udevdb
-  rename udev_volume_id to vol_id and add --export option
-  add ata_id to read serial numbers from ATA drives
-  IMPORT allow to import program returned keys into the env
-  unify execute_command() and execute_program()
-  IMPORT=<file> allow to import a shell-var style config-file
-  allow rules to be compiled to one binary file
-  fix the fix and change the file to wait for to the "bus" link
-  fix udevstart and let all events trvel trough udev
-  prepare for module loading rules and add MODALIAS key
-  remove device node, when type block/char has changed
-  Makefile: remove dev.d/ hotplug.d/ from install target
-  udevcontrol: add max_childs command
-  udevd: control log-priority of the running daemon with udevcontrol
-  udeveventrecorder: add small program that writes an event to disk
-  klibc: add missing files
-  udevinitsend: handle replay messages correctly
-  udev man page: add operators
-  udevd: allow starting of udevd with stopped exec-queue
-  klibc: version 1.0.14
-  udev: handle all events - not only class and block devices
-  volume_id: use udev-provided log-level
-  udev: clear lists if a new value is assigned
-  udev: move dev.d/ handling to external helper
-  udev: allow final assignments :=
-  udevd: improve timeout handling
-  Makefile: fix DESTDIR
-  udevd: add initsend
-  udevd: add udevcontrol
-  udevd: listen for netlink events
-
-Stefan Schweizer:
-  Dialout group fix for capi devices in the gentoo rules file
-
-Summary of changes from v057 to v058
-============================================
-
-Daniel Drake:
-  o Writing udev rules docs update
-
-Darren Salt:
-  o update cdsymlinks to latest version
-
-Greg Kroah-Hartman:
-  o remove detach_state files from the sysfs test tree
-  o Update permissions on test scripts so they will run properly now
-  o hopefully fix up the symlinks in the test directory
-  o Removed klibc/klibc.spec as it is autogenerated
-  o Added symlinks thanks to Kay's script and git hacking
-  o add Red Hat/Fedora html documenation
-  o Update Red Hat default udev rules
-
-Kay Sievers:
-  o selinux: fix handling during creation of symlinks
-  o Fedora udev.rules update
-  o libsysfs: version 2.0
-  o klibc: version 1.0.7
-
-Masanao Igarashi:
-  o Fix libsysfs issue with relying on the detach_state file to be
-
-Summary of changes from v056 to v057
-============================================
-
-<tklauser:access.unizh.ch>:
-  o fix stupid all_partitions bug
-
-Kay Sievers:
-  o add test for make -j4 to build-check
-  o klibc: version 1.0.6
-  o update Debian rules
-  o apply default permissions only for devices that will need it
-  o adapt RELEASE-NOTES
-  o udev_volume_id: fix endianess macros
-  o udev-test.pl: add test for DEVNAME export to RUN environment
-  o update the man page to reflect the recent changes
-  o export DEVNAME to RUN-key executed programs
-  o fix make -j4 and the local klibc-install
-  o update RELEASE-NOTES
-  o add RUN key to be able to run rule based notification
-  o fix udevtest to print the error if logging is disabled
-  o move execute_program to utils + add action to init_device
-  o correct correction for error path for PROGRAM execution
-  o correct error path for PROGRAM execution
-  o klibc: version 1.0.5
-  o check for strlen()==0 before accessing strlen()-1
-  o allow to match against empty key values
-  o read %s{}-sysfs values at any device in the chain
-  o udev_rules.c: don't change sysfs_device while walking up the device chain
-  o klibc: strlcpy/strlcat - don't alter destination if size == 0
-  o fix klibc's broken strlcpy/strlcat
-  o udevinfo: print SYSFS attribute the same way we match it
-  o remove untrusted chars read from sysfs-values or returned by PROGRAM
-  o udevinfo: print errors to stderr instead of stdout
-  o klibc: version 1.0.4
-  o support log-priority levels in udev.conf
-  o test-suite: remove UDEV_TEST, it's not needed anymore
-  o libsysfs: remove trailing slash on SYSFS_PATH override
-
-
-Summary of changes from v055 to v056
-============================================
-
-<tklauser:access.unizh.ch>:
-  o fix header paths in udev_libc_wrapper.c
-
-Kay Sievers:
-  o udev-test.pl: use more common user/group names
-  o klibc: remove SCCS directories from the temporary klibc install
-  o udev-test.pl: add a test where the group cannot be found in /etc/passwd
-  o udev-test.pl: add check for textual uid/gid
-  o fix bad typo that prevents the GROUP to be applied
-  o udevd: don't delay events with TIMEOUT in the environment
-  o klibc: use klcc wrapper instead of our own Makefile
-  o change call_foreach_file to return a list
-
-
-Summary of changes from v054 to v055
-============================================
-
-<jkluebs:luebsphoto.com>:
-  o This patch causes the remove handler to check that each symlink actually points to the correct devnode and skip it if it does not.
-
-<pebenito:gentoo.org>:
-  o udev selinux fix
-
-<tklauser:access.unizh.ch>:
-  o The following patch fixes some warnings when compiling volume_id from udev with the -Wall compiler flag. Define _GNU_SOURCE for strnlen() and correct the path to logging.h
-  o The following patch fixes a warning when compiling chassis_id from udev with the -Wall compiler flag. There are too much conversions in the format string of sscanf(). One %d can be dropped.
-
-Greg Kroah-Hartman:
-  o fix raid rules
-  o added frugalware udev ruleset
-  o merge selinux and Kay's symlink fixes together
-
-Hannes Reinecke:
-  o volume_id: Fix label/uuid reading for reiserfs
-
-Kay Sievers:
-  o add udevstart to the RELEASE-NOTES
-  o volume_id: version 43
-  o clarify the shortcomings of %e
-  o correct rule match for devices without a physical device
-  o remove unneeded code, libsysfs does this for us
-  o add final release note
-  o add ENV{} key to match agains environment variables
-  o simplify sysfs_pair handling
-  o add a test and simplify debug statement
-  o support =, ==, !=, += for the key match and assignment
-  o add OPTION="last_rule" to skip any later rule
-  o rename namedev_dev to udev_rule
-  o correct enum device_type
-  o remove udevstart on make clean
-  o volume_id: version 42
-  o volume_id: version 41
-  o remove unneeded include
-  o The path to dlist.h is not correct
-  o udevinfo -d: use '=' as separator, cause ':' may be a part of the devpath
-  o klibc: version 1.0.3
-  o add RELEASE-NOTES file
-  o test suite: move "driver" link to physical device
-  o remove PLACE key match
-  o don't lookup "root" in the userdb
-  o fix ia64 compile
-  o fix segfaulting udev while DRIVER matching
-  o cleanup list.h
-  o klibc: version 0.214
-  o rename device_list->list to device_list->node
-  o replace strncpy()/strncat() by strlcpy()/strlcat()
-  o split udev and udevstart
-  o udev_volume_id: version 39
-  o rename LOG to USE_LOG in all places
-  o remove Makefile magic for klibc integration
-  o klibc_fixups: remove no longer needed stuff
-  o udev_volume_id: volume_id v38
-  o use numeric owner/group as default values to avoid parsing userdb
-  o fix up segfaulting binaries with new klibc
-  o udevinfo -d: speed-up device dump
-  o klibc: version 0.211
-  o klibc_fixups: remove unneeded stuff
-  o replace weird defines by real code
-  o udev-test.pl: remove useless tests
-  o allow unlimitied count of symlinks
-  o unmap db-file after use
-  o remove typedef for call_foreach_file() handler function
-  o correct udev_init_device
-  o rename attributes to options
-  o kill stupid gcc4 warning
-  o trivial clenaup of namedev code
-  o klibc: check for gcc4
-  o klibc: update v0.205
-
-Thierry Vignaud:
-  o gentoo rule update for raid devices
-
-
-Summary of changes from v053 to v054
-============================================
-
-<tklauser:access.unizh.ch>:
-  o udev_volume_id: add Reiser4 support
-
-Kay Sievers:
-  o namedev: skip backslashes only if followed by newline
-  o wait_for_sysfs: add joydev
-  o udevinfo: print devpath -> node relationship for all devices
-  o trivial rename of some variables
-  o klibc v0.199
-  o big libsysfs diet (pre 2.0 version)
-  o udev_volume_id: volume_id v35
-  o add "serio" to bus list
-  o determine device type in udev_init_device()
-  o move kernel name/number evaluation into udev_init_device()
-  o detect NAME="" as ignore_device rule
-  o trivial namedev cleanup
-  o cleanup db functions
-  o clean up match_place()
-  o switch device type to enum
-  o switch major/minor to dev_t
-  o remove the device node only if the major/minor number matches
-  o libsysfs: work around a klibc bug
-  o introduce OPTIONS=ignore_device, ignore_remove, all_partitions" key
-  o namedev: execute PROGRAM only once and not possibly for every physical device
-
-Patrick Mansfield:
-  o update scsi_id to work with libsysfs changes
-
-
-Summary of changes from v052 to v053
-============================================
-
-Greg Kroah-Hartman:
-  o fix gentoo fb permission issue
-  o allow simple-build-check.sh to go faster if MAKEOPTS is set
-  o make the release tarballs have writable files in them
-  o remove gentoo permission file as it's not valid anymore
-
-Kay Sievers:
-  o fix special file mode mask for temporary device node
-  o udevstart: simplify "dev" file searching
-  o udev_volume_id: remove temporary node creation and parent handling
-  o add %P modifier to query the node name of the parent device
-  o udev_volume_id: remove __packed__ from dasd structure as it does not work
-  o create /block/*/range count of partitons for all_partitions
-
-Patrick Mansfield:
-  o scsi_id changes for use with udev %N and %p
-
-
-Summary of changes from v051 to v052
-============================================
-
-<md:linux.it>:
-  o debian: update rules files
-  o raid-devfs.sh: devfs names for hardware RAID controllers
-  o scsi_id: when udevstart is started, /tmp is not writeable
-  o cdsymlinks.sh: trivial fix, the variable is initialized to '', not 0
-
-<sschweizer:gmail.com>:
-  o gentoo/udev.rules: add default permissions for sound devices
-
-Greg Kroah-Hartman:
-  o fix example comment in ide-devfs.sh
-  o Add infiniband to gentoo rules
-  o Another gentoo fix, adding dvb support
-  o Fix gentoo bug #76056 (fb device group permissions.)
-  o Fix gentoo bug #81102, device nodes for the pktcdvd device
-
-Kay Sievers:
-  o provide temporary device node for callouts to access the device
-  o udev_volume_id: fix dasd disklabel reading with -l option
-  o udev_volume_id: volume_id version 034
-  o udev_volume_id: rename probe_ibm into probe_dasd
-  o udev_volume_id: volume_id version 032
-  o Makefile: add some more warnings and prepare for clean gcc4 compile
-  o Makefile: cleanup conditional config option sections
-  o fix -Wsign-compare warnings
-  o chassis_id: clean compilation and fix bad function parameter passing
-  o simple_build_check: make it possible to pass KERNEL_DIR
-  o selinux: cleanup udev integration
-
-Michael Buesch:
-  o trivial: remove _all_ trailing slashes with no_trailing_slash()
-  o trivial: fix signedness
-  o namdev: allow symlink-only rules to specify node permissions
-  o udevd: fix valgrind warning
-
-
-Summary of changes from v050 to v051
-============================================
-
-<roland:digitalvampire.org>:
-  o This fixes a silly mistake in how udevinfo prints the major and minor numbers (right now it prints the minor next to "MAJOR" and the major next to "MINOR" ;)
-
-<tklauser:access.unizh.chbk>:
-  o I tried to compile udev 050plus with the GCC 4.0 snapshot 200412119 and got two errors about possibly uninitialized structs, so I fixed this. 
-
-Christian Bornträger:
-  o udev_volume_id: fix -d option
-
-Greg Kroah-Hartman:
-  o gentoo fb permission fix
-  o fix gcc 2.96 issue in libsysfs
-  o remove the lfs startup script on request of the author
-  o clean up the aoe char device rules, and delete the block one as it's not needed
-  o add aoe block and char device rules to the gentoo rule file
-  o fix udev_volume_id build error
-
-Hannes Reinecke:
-  o rearrange link order in Makefile
-
-Kay Sievers:
-  o udev_volume_id: new version of volume_id
-  o klibc: update to version 0.198
-  o udev_volume_id: fix FAT label reading
-  o klibc: update to version 0.196
-  o udevd: throttle the forking of processes
-  o udevd: add possible initialization of expected_seqnum
-  o udevd: it's obviously not the brightest idea to exit a device node manager if it doesn't find /dev/null
-  o udevd: separate socket handling to prepare for other event sources
-  o udevd: support -d switch to become a daemon
-  o udev_volume_id: version 27
-  o udevd: split up message receiving an queueing
-  o remove useless warning if udev.conf contains keys not read by udev itself
-  o improve event sequence serialization
-  o remove udevsend syslog noise on udevd startup
-  o limit the initial timeout of the udevd event handling
-  o correct detection of hotplug.d/ udevsend loop
-  o correct log statement
-  o remove default_* permissions from udev.conf file
-  o update Fedora config files and add some more tests
-  o allow permissions only rules
-  o add SUBSYSTEM rule to catch all block devices and apply the disk permissions
-  o update Fedora config files
-  o handle renamed network interfaces properly if we manage hotplug.d/
-  o allow multiline rules by backslash at the end of the line
-  o add OnStream tape drive rules
-  o simplify rules file by setting default mode to 0660
-  o simplify permission application
-  o I broke the extras/ again. Add simple build test script now
-  o Merge vrfy.org:/home/kay/src/udev into vrfy.org:/home/kay/src/udev.kay
-  o initial merge of fedora udev.permissions into udev.rules
-  o remove permissions file mentioning from the udev man page
-  o fix some typos in gentoo's udev.rules introduced by the merge
-
-Michael Buesch:
-  o The attached patch fixes the code path if namedev_name_device() fails
-
-Summary of changes from v049 to v050
-============================================
-
-<harald:redhat.com>:
-  o selinux patch
-
-<tklauser:access.unizh.ch>:
-  o I made some more changes to the manpage of udev including
-
-Kay Sievers:
-  o update libsysfs to CVS version and fix segfaulting attribute reading
-  o klibc supports LOG_PID now, so remove our own implementation
-  o avoid building klibc test programs and pass SUBDIRS= to klibc clean
-
-
-Summary of changes from v048 to v049
-============================================
-
-Greg Kroah-Hartman:
-  o fix 'make clean' error in klibc
-
-Kay Sievers:
-  o update klibc to 0.194
-  o export DEVNAME regardless of the state of udev_dev_d
-  o add class specific files for class/spi_transport and class/spi_host
-  o udevd-test.pl: remove wrong date calculation
-  o check earlier if we should run as udevstart
-  o remove double initialization
-  o include missing header to udevtest.c
-  o add -V option to udev to print the version number
-  o prevent udev node creatinon for "class" registration
-  o udevd: serialization of the event sequence of a chain of devices
-  o add a class/fc_host file to the list of what to wait for
-  o udev_volume_id: links sysfs.a instead of all objects
-
-Martin Schlemmer:
-  o remove leftover from udevinfo's -d option
-
-
-Summary of changes from v047 to v048
-============================================
-
-Greg Kroah-Hartman:
-  o fix udev_volume_id so it will now build properly
-  o fix scsi_id build errors due to changes in the main udev makefile
-
-
-Summary of changes from v046 to v047
-============================================
-
-<klauser:access.unizh.ch>:
-  o Various typos and other litte errors in udev.8.in
-
-<sjoerd:spring.luon.net>:
-  o DEVNAME on device removal
-
-<sschweizer:gmail.com>:
-  o Allow GROUP to have modifiers in it
-
-Greg Kroah-Hartman:
-  o add more debian rules files
-  o move distro specific config files into their own directories
-  o update debian rules files
-  o added asterix rules to the gentoo file
-  o use udevstart for udev.init.* files
-  o delete a bunch of files no longer needed
-  o fix gentoo scsi cdrom rule
-  o Fix the multithreaded build again
-  o merge
-  o comment out ability to run udev-test.pl with valgrind
-  o fix spurious valgrind warning in udev
-  o fix udevinfo '-q path' option as it was not working
-  o merge
-  o fix parallel build error
-
-Kay Sievers:
-  o update Fedora dev.d/ example and remove unused conf.d/ directory
-  o don't install distribution specific init script on "make install"
-  o restore OWNER/GROUP assignment in rule coming from RESULT
-  o make gcov compile scripts working with recent gcc
-  o fix udev-test/udev-test.pl to work with again
-  o add net/atml and class/ppdev to the wait_for_sysfs exception list
-  o add net/nlv* devices to the exception list
-  o add "pcmcia" and "fc_transport" to the wait_for_sysfs lists
-  o remove unused timestamp field
-  o simplify permission handling
-  o handle /etc/hotplug.d/ only if the event comes from udevd
-  o trivial cleanups and change some comments
-  o remove unused variables
-  o udevsend/udevd handle events without a subsystem
-  o use blacklist on device "remove" and remove dev.d/ call code duplication
-  o update the man pages and correct Usage: hints
-  o don't call the hotplug scripts with a test run
-  o don't call dev.d/ scripts twice, if directory = subsystem
-  o remove archive file if we changed something
-  o link archive insted of objects
-  o rename udev_lib to udev_utils and dev_d to udev_multiplex
-  o handle whole hotplug event with udevd/udev
-  o integrate wait_for_sysfs in udev
-  o make the searched multiplex directories conditionally
-  o add MANAGED_EVENT to the forked udev environment
-  o export DEVNAME on remove event
-  o export udev_log flag to the environment
-  o remove my test code
-  o add support for /devices-devices without any file to wait for
-  o Patch from Alex Riesen <raa.lkml@gmail.com>
-  o add a bunch of busses to the list of what to wait for
-  o close connection to syslog in forked udevd child
-  o udevd exit path cleanup
-  o fix network device naming bug
-
-
-Summary of changes from v045 to v046
-============================================
-
-Greg Kroah-Hartman:
-  o make spotless for releases
-
-Kay Sievers:
-  o Don't try to print major/minor for devices without a dev file
-  o remove get_device_type and merge that into udev_set_values()
-  o prevent udevd crash if DEVPATH is not set
-  o add ippp and bcrypt to the exception lists of wait_for_sysfs
-  o let klibc add the trailing newline to syslog conditionally
-  o disable logging for udevstart
-  o add NAME{ignore_remove} attribute
-  o remove historical SYSFS_attr="value" format
-  o don't wait for sysfs if the kernel(2.6.10-rc2) tells us what not to expect
-  o change key names in udevinfo sysfs walk to match the kernel
-  o support DRIVER as a rule key
-  o support SUBSYSTEM as a rule key
-  o rename udevdb* to udev_db*
-  o Make dev.d/ handling a separate processing stage
-  o make the udev object available to more processing stages
-  o remove udev_lib dependency from udevsend, which makes it smaller
-  o add ACTION to udev object to expose it to the whole process
-  o make udevinfo's -r option also workimg for symlink queries
-  o let udev act as udevstart if argv[1] == "udevstart"
-  o improve udevinfo sysfs info walk
-  o add sysfs info walk to udevinfo
-  o pass the whole event environment to udevd
-  o replace tdb database by simple lockless file database
-
-
-Summary of changes from v044 to v045
-============================================
-
-Martin Schlemmer:
-  o Some updates for Gentoo's udev rules
-
-
-Summary of changes from v043 to v044
-============================================
-
-Greg Kroah-Hartman:
-  o add cdsymlinks.sh support to gentoo rules file
-  o fix gentoo legacy tty rule
-  o remove 'sudo' usage from the Makefile
-  o make udev-test.pl test for root permissions before running
-
-Kay Sievers:
-  o reduce syslog noise of udevsend if multiple instances try to start udevd
-  o add i2c-dev to the list of devices without a bus
-
-
-Summary of changes from v042 to v043
-============================================
-
-Greg Kroah-Hartman:
-  o add test target to makefile
-  o add dumb script to show all sysfs devices in the system
-
-Kay Sievers:
-  o Shut up wait_for_sysfs class/net failure messages, as it's not possible to
-    get that right for all net devices. Kernels later than 2.6.10-rc1 will
-    handle that by carrying the neccessary information in the hotplug event.  
-  o wait() for specific pid to return from fork()
-  o Don't use any syslog() in signal handler, cause it may deadlock
-  o Add support for highpoint ataraid to volume_id to suppress label reading on raid set members.
-  o Add a bunch of devices without "device" symlinks
-  o Exit, if udevtest cannot open the device (segfault)
-  o Patches from Harald Hoyer <harald@redhat.com>
-  o Apply the default permissions even if we found a entry in the permissions
-    file. Correct one test, as the default is applied correctly now and the
-    mode will no longer be 0000.
-  o add test for format chars in multiple symlinks to replace
-  o Add net/vmnet and class/zaptel to the list of devices without physical device
-
-
-Summary of changes from v040 to v042
-============================================
-
-Greg Kroah-Hartman:
-  o add inotify to the rules for gentoo
-
-Kay Sievers:
-  o skip waiting for device if we get a bad event for class creation and not for a device underneath it
-  o add net/pan and net/bnep handling
-  o switch wait for bus_file to stat() instead of open() add net/tun device handling add ieee1394 device handling
-  o Remove the last klibc specific line from the main udev code Move _KLIBC_HAS_ARCH_SIG_ATOMIC_T to the fixup file which is automatically included by the Makefile is we build with klibc
-  o ignore *.rej files from failed patches
-  o update to libsysfs 1.2.0 and add some stuff klib_fixup Now we have only the sysfs.h file different from the upstream version to map our dbg() macro.
-  o improve klibc fixup integration
-  o cleanup udevd/udevstart
-  o expose sysfs functions for sharing it
-
-
-Summary of changes from v039 to v040
-============================================
-
-<jk:blackdown.de>:
-  o wait_for_sysfs update for dm devices
-
-Greg Kroah-Hartman:
-  o sparse cleanups on the tree
-  o fix stupid cut-and-paste error for msr devices on gentoo boxes
-  o add *~ to bk ignore list
-  o delete udevruler.c as per Kay's request
-  o fix up the wait_for_sysfs_test script a bit
-
-Kay Sievers:
-  o fix debug in volume id / fix clashing global var name
-  o volume_id fix
-  o $local user
-  o cleanup netif handling and netif-dev.d/ events
-  o big cleanup of internal udev api
-  o don't wait for dummy devices
-  o close the syslog
-  o Fix ppp net devices in wait_for_sysfs
-  o Fix wait_for_sysfs messages (more debugging info)
-
-
-Summary of changes from v038 to v039
-============================================
-
-Greg Kroah-Hartman:
-  o Hopefully fix the vcs issue in wait_for_sysfs
-  o take out & from wait_for_sysfs_test that I previously missed
-  o add very nice cdsymlinks scripts
-  o add some helper scripts for dvb and input devices
-  o add debian config files
-  o let the extras/ programs build "pretty" also
-  o tweak the ccdv program to handle files in subdirectories being built
-  o crap, I messed up the 'sed' instances pretty badly, this fixes the config and man page mess
-  o fix broken 'make -j5' functionality
-
-Kay Sievers:
-  o swich attribute open() to simple stat()
-  o wait_for_sysfs update for /class/firmware and /class/net/irda devices
-  o fix unusual sysfs behavior for pcmcia_socket
-  o remove sleeps from udev as it is external now
-  o delete udevruler?
-  o Makefile fix
-
-Patrick Mansfield:
-  o update udev to scsi_id 0.7
-  o pass SYSFS setting down for extras builds
-  o move assignments past local variables
-
-
-Summary of changes from v037 to v038
-============================================
-
-<andrew.patterson:hp.com>:
-  o Re: Problem parsing %s in udev rules
-
-Greg Kroah-Hartman:
-  o fix up error in building extras and libsysfs
-
-Summary of changes from v036 to v037
-============================================
-
-<md:linux.it>:
-  o small udev patch
-
-Greg Kroah-Hartman:
-  o fix compilation warning in tdb log message
-  o Fix build error with klibc due to recent changes
-  o merge
-  o add wait_for_sysfs test script to the tarball to help people debug their boxes
-  o add ipsec to wait_for_sysfs ignore list
-  o added ccdv to bk ignore list
-  o a few more Makefile tweaks for the quiet feature
-  o Make the build silent, thanks to a helper program from ncftp
-  o rename files to have '_' instead of '-' in them
-  o change max time to wait in wait_for_sysfs to 10 seconds to hopefully handle some slow machines
-  o add support for class/raw/ to wait_for_sysfs
-  o fix up Makefile for wait_for_sysfs udev_version.h dependancy
-  o remove the debian specific file, as they don't want to share with the rest of the world :(
-
-Kay Sievers:
-  o prevent deadlocks on an corrupt udev database
-  o wait_for_sysfs_update
-
-Michael Buesch:
-  o fix asmlinkage
-  o fix incompatible pointer type warning
-
-
-Summary of changes from v035 to v036
-============================================
-
-Greg Kroah-Hartman:
-  o add the error number to the error message in wait_for_sysfs to help out in debugging problems
-
-Summary of changes from v034 to v035
-============================================
-
-Greg Kroah-Hartman:
-  o added ieee1394 support to wait_for_sysfs
-  o update wait_for_sysfs with a bunch more devices thanks to user reports
-
-Summary of changes from v033 to v034
-============================================
-
-Kay Sievers:
-  o wait_for_sysfs bluetooth class update
-
-Greg Kroah-Hartman:
-  o add comment in wait_for_sysfs to explain the structure better
-  o Revert previous dev_d.c change, it's not what is causing HAL problems
-  o hm, somethings odd with DEVPATH, see if this fixes it
-  o 33_bk mark for the makefile
-  o wait_for_sysfs: clean up the logic for the list of devices that we do not expect device symlinks for
-  o get rid of annoying extra lines in the syslog for some libsysfs debug messages
-  o added support for i2c devices in wait_for_sysfs.c
-  o add support for i2c-adapter devices to wait_for_sysfs.c
-
-Summary of changes from v032 to v033
-============================================
-
-<harald:redhat.com>:
-  o udev close on exec
-  o some cleanups and security fixes
-  o some cleanups and security fixes
-  o selinux for udev
-  o cleanup PATCH for extras/chassis_id/Makefile
-
-<kpfleming:backtobasicsmgmt.com>:
-  o respect prefix= setting in built udev.conf (updated)
-
-Greg Kroah-Hartman:
-  o add support for usb interfaces to wait_for_sysfs to keep it quiet
-  o enable native tdb spinlocks on i386 platforms
-  o delete extras/multipath-tools as per the author's request
-  o be paranoid in dev_d.c
-  o add USE_SELINUX to README documentation so people have a chance to see what is going on
-  o update the selinux.h file to start to look sane
-  o update bk ignore list for the wait_for_sysfs binary
-  o kdetv wants to see device nodes in /dev
-  o update comments in scsi-devfs.sh
-  o fix up Makefiles to get the klibc build working properly
-  o update bk ignore list for new klibc generated files
-  o oops forgot to add the new klibc/include directory
-  o update klibc to version 0.181
-
-Kay Sievers:
-  o fix problems with dev.d and udevstart
-  o wait_for_sysfs debug cleanup
-  o fix problems using scsi_id with udevstart
-  o update volume_id
-  o finally solve the bad sysfs-timing for all of us
-  o volume-id build fix and update
-  o switch udev's seqnum to u64
-  o add enum tests
-  o fix udev segfaults with bad permissions file
-
-Patrick Mansfield:
-  o update udev to include scsi_id 0.6
-
-
-Summary of changes from v031 to v032
-============================================
-
-<harald:redhat.com>:
-  o udev parse bug
-
-Kay Sievers:
-  o handle only block and class devices
-  o fix udevstart badly broken in udev 031
-
-
-Summary of changes from v030 to v031
-============================================
-
-<arun:codemovers.org>:
-  o udev - read long lines from config files overflow fix
-
-<ballarin.marc:gmx.de>:
-  o Update the FAQ with info about hardlink security
-
-<david:fubar.dk>:
-  o compatibility symlinks for udev
-
-David Weinehall:
-  o Minor POSIX-fixes for udev
-
-Greg Kroah-Hartman:
-  o add symlink for video rule
-  o add a "first" list to udevstart and make it contain the class/mem/ devices
-  o fix compiler warning in udevtest.c
-  o Fix old-style pty breakage in rules file for tty device
-  o add rules for i386 cpu devices
-  o add permission for legotower usb devices
-
-Kay Sievers:
-  o Fix naming ethernet devices in udevstart
-  o update udev_volume_id
-  o let /sbin/hotplug execute udev earlier
-  o pass SEQNUM trough udevd
-  o fix manpages based on esr's spambot
-
-Martin Schlemmer:
-  o add microcode rule to permissions.gentoo file
-
-Michael Buesch:
-  o Try to provide a bit of security for hardlinks to /dev entries
-
-Olaf Hering:
-  o udevsend depends on udev_lib.o
-
-Tom Rini:
-  o fix UDEV_NO_SLEEP
-  o clean up start_udev a bit
-  o Make udev/udevstart be one binary
-  o Add 'asmlinkage' to udev-030
-
-
-Summary of changes from v029 to v030
-============================================
-
-Greg Kroah-Hartman:
-  o fix stupid off-by-one bug that caused udevstart to die on x86-64 boxes
-
-
-Summary of changes from v028 to v029
-============================================
-
-Greg Kroah-Hartman:
-  o add permission rule for jogdial device
-  o fix dumb bug I added to udevstart
-  o make a "last list" of devices for udevstart to operate on last
-  o fix permission problem with input event and ts nodes for gentoo
-  o change default perms of misc/rtc to be readable by anyone
-
-Olaf Hering:
-  o allow NAME_SIZE > SYSFS_PATH_MAX
-
-
-Summary of changes from v027 to v028
-============================================
-
-<atul.sabharwal:intel.com>:
-  o Patch for chassis_id exras module
-
-Daniel Drake:
-  o Writing udev rules doc update
-
-Greg Kroah-Hartman:
-  o clean up block whitelist search logic a bit
-  o reverse order of scanning of udevstart to look at class before block
-
-Kay Sievers:
-  o update udev_volume_id
-
-Leann Ogasawara:
-  o udevstart performance increase
-
-Patrick Mansfield:
-  o update udev scsi_id to scsi_id 0.5
-
-
-Summary of changes from v026 to v027
-============================================
-
-<fork0:users.sf.net>:
-  o fix handle leak in udev_lib.c
-
-Greg Kroah-Hartman:
-  o tweak the gentoo default permission rules as they are wrong for tty and misc devices
-
-
-Summary of changes from v025 to v026
-============================================
-
-Arnd Bergmann:
-  o udev rpm fix
-
-Greg Kroah-Hartman:
-  o add test for ! in partition name
-  o 025_bk mark
-  o Update to version 117 of klibc (from version 108)
-  o add volume_id ignore rule for bk
-  o add volume_id support to the udev.spec file
-  o remove dbus and selinux stuff from the udev.spec file
-  o delete udev_selinux as it doesn't work properly and is the wrong way to do it
-  o Deleted the udev_dbus extra as it didn't really work properly and HAL has a real solution now
-  o add udev.permissions.slackware file
-  o udevstart: close open directories
-
-Kay Sievers:
-  o fix udevd zombies
-  o catchup with recent klibc
-  o Re: udevsend fallback
-  o udev_volume_id update
-  o udev callout for reading filesystem labels
-  o udev callout for reading filesystem labels
-  o udev default config layout changes
-
-Leann Ogasawara:
-  o evaluate getenv() return value for udev_config.c
-
-Summary of changes from v024 to v025
-============================================
-
-<md:linux.it>:
-  o devfs.sh-ide-floppy
-
-<sjoerd:spring.luon.net>:
-  o DEVNODE -> DEVNAME transition fixes
-
-Daniel Drake:
-  o Update writing udev rules docs
-
-Greg Kroah-Hartman:
-  o make dev.d call each directory in the directory chain of the device name, instead of just the whole name
-  o add devd_test script
-  o add more permissions based on SuSE's recommendations
-  o added rules for tun and raw devices
-  o add udev conf.d file
-  o Switch the default config to point to a directory for the rules and permission files
-  o update the Red Hat .dev files to work on other distros
-  o add dbus.dev, pam_console.dev and selinux.dev files for /etc/dev.d/default/ usage
-  o add hints for red hat users from Leann Ogasawara <ogasawara@osdl.org>
-  o add scripts to run gcov for udev from Leann Ogasawara <ogasawara@osdl.org>
-  o change permissions on udevd test scripts
-  o Fix build process for users who have LC_ALL set to a non-english language
-  o Added expanded tests to the test framework from Leann Ogasawara <ogasawara@osdl.org>
-  o added execelent "writing udev rules" document from Daniel Drake <dan@reactivated.net>
-  o added rule to put USB printers in their proper places
-  o added rules for CAPI devices
-  o added a dev.d alsa script to help people out
-
-Kay Sievers:
-  o fix test regressions
-  o udev_selinux changes
-  o udevd test script
-  o udev_dbus changes
-  o fix devpath for netdev
-
-Leann Ogasawara:
-  o gcov for udev
-
-
-Summary of changes from v023 to v024
-============================================
-
-<atul.sabharwal:intel.com>:
-  o Add README for chassis_id
-  o Add chassis_id program to extras directory
-
-<chris_friesen:sympatico.ca>:
-  o udevd race conditions and performance,  assorted cleanups
-
-<hare:suse.de>:
-  o fix SEGV in libsysfs/dlist.c
-
-<maryedie:osdl.org>:
-  o add OSDL documentation for persistent naming
-
-<md:linux.it>:
-  o small ide-devfs.sh fix
-
-Greg Kroah-Hartman:
-  o remove compiler warning from udevd.c
-  o only generate udev.8 on the fly, not all other man pages
-  o update bk ignore list some more
-  o update bk ignore list
-  o switch to generate the man pages during the normal build, not during the install
-  o convert udev.8.in to use @udevdir@ macro for make install
-  o first step of making man pages dynamically generated
-  o add install and uninstall the etc/dev.d/net/hotplug.dev file to the Makefile
-  o tweak net_test a bit
-  o fix some segfaults when running udevtest for network devices
-  o make a net_test test script using udevtest
-  o handle the subsytem if provided in udevtest
-  o add hotplug.dev script to handle renamed network devices
-  o add a bunch of network class devices to the test sysfs tree
-  o add udevruler to the bk ignore list
-  o update RFC-dev.d docs due to DEVNODE to DEVNAME change
-  o clean up chassis_id coding style
-  o clean up the OSDL document formatting a bit
-  o add netlink rules to devfs and gentoo rules files
-  o added USB device rules to rules files
-  o clean up the gentoo rules file a bit more, adding dri rules
-  o fix up udev.rules to handle oss rules better
-  o 023_bk mark
-  o fix udev.spec file for where udevtest should be placed
-
-Kay Sievers:
-  o tweak node unlink handling
-  o switch udevd's msg_dump() to #define
-  o handle netdev in udevruler
-  o man page cleanup
-  o put config info in db for netdev
-  o increase udevd event timeout
-  o udevstart fix
-  o put netdev handling and dev.d/ in manpages
-  o DEVPATH for netdev
-  o netdev - udevdb+dev.d changes
-  o udevd race conditions and performance,  assorted cleanups - take 2
-  o udevinfo patch
-  o dev_d.c file sorting and cleanup
-  o apply all_partitions rule to main block device only
-
-
-Summary of changes from v022 to v023
-============================================
-
-Kay Sievers:
-  o hmm, handle net devices with udev?
-  o correct apply_format() for symlink only rules
-  o don't init namedev on remove
-  o first stupid try for a rule compose gui
-  o replace fgets() with mmap() and introduce udev_lib.[hc]
-  o make udevtest a real program :)
-
-Daniel E. F. Stekloff:
-  o udevinfo patch
-
-Greg Kroah-Hartman:
-  o create the /etc/dev.d/ directories in 'make install'
-  o actually have udev run files ending in .dev in the /etc/dev.d/ directory as documented
-  o added RFC-dev.d document detailing how /etc/dev.d/ works
-  o fixed up udev.spec to handle selinux stuff properly now
-  o remove USE_DBUS and USE_SELINUX flags from the README as they are no longer present
-  o remove selinux stuff from the main Makefile
-  o move udev_selinux into extras/selinux
-  o fix dbus build in the udev.spec file
-  o remove dbus stuff from main Makefile
-  o move udev_dbus to extras/dbus
-  o udev_dbus can now compile properly, but linnking is another story
-  o remove udev_dbus.h from Makefile
-  o first cut at standalone udev_selinux program
-  o remove selinux support from udev core as it's no longer needed
-  o first cut at standalone udev_dbus program
-  o add get_devnode() helper to udev_lib for udev_dbus program
-  o remove dbus code from core udev code as it's no longer needed to be there
-  o add /etc/dev.d/ support for udev add and remove events
-  o fix build error in namedev.c caused by previous patch
-  o 022_bk tag
-  o fix 'make spotless' to really do that in klibc
-  o add a question/answer about automounting usb devices to the FAQ
-  o mark scsi-devfs.sh as executable
-  o Increase the name size as requested by Richard Gooch <rgooch@ras.ucalgary.ca>
-  o fix udevtest to build properly after the big udev_lib change
-
-Olaf Hering:
-  o uninitialized variable for mknod and friend
-
-Richard Gooch:
-  o SCSI logical and physical names for udev
-
-Theodore Y. T'so:
-  o Trivial man page typo fixes to udev
-
-
-Summary of changes from v021 to v022
-============================================
-
-<ananth:in.ibm.com>:
-  o more Libsysfs updates
-  o Libsysfs updates
-
-<async:cc.gatech.edu>:
-  o fix HOWTO-udev_for_dev for udevdir
-
-Kay Sievers:
-  o udev-test.pl cleanup
-  o add dev node test to udev-test.pl
-  o add permission tests
-  o "symlink only" test
-  o callout part selector tweak
-  o cleanup callout fork
-  o allow to specify node permissions in the rule
-  o man page beauty
-  o put symlink only rules to the man page
-  o rename strn*() macros to strmax
-  o conditional remove of trailing sysfs whitespace
-  o clarify udevinfo text
-  o better fix for NAME="foo-%c{N}" gets a truncated name
-  o overall trivial trivial cleanup
-  o fix NAME="foo-%c{N}" gets a truncated name
-  o cleanup mult field string handling
-
-<ken:cgi101.com>:
-  o fix a type in docs/libsysfs.txt
-  o Added line to udev.permissions.redhat
-  o Include more examples in the docs area for gentoo and redhat
-
-<md:linux.it>:
-  o udevstart fixes
-
-Greg Kroah-Hartman:
-  o add big major tests to udev-test.pl
-  o add a test for a minor over 255
-  o udev-test.pl: print out major:minor and perm test "ok" if is ok
-  o make perm and major:minor test errors be reported properly
-  o remove extra ; in namedev_parse.c
-  o Added multipath-tools 0.1.1 release
-  o deleted current extras/multipath directory
-  o 021_bk mark
-  o fix the build for older versions of gcc
-
-Hanna V. Linder:
-  o Small fix to remove extra "will" in man page
-
-Olaf Hering:
-  o make spotless
-  o udev* segfaults with new klibc
-
-Patrick Mansfield:
-  o add tests for NAME="foo-%c{N}"
-
-Summary of changes from v020 to v021
-============================================
-
-Kay Sievers:
-  o install udevinfo in /usr/bin
-  o blacklist pcmcia_socket
-
-Greg Kroah-Hartman:
-  o fix udev.spec to find udevinfo now that it has moved to /usr/bin
-  o Fix another problem with Makefile installing initscript
-  o fix the Makefile to install the init script into the proper directory
-  o make spec file turn off selinux support by default
-
-
-Summary of changes from v019 to v020
-============================================
-
-<christophe.varoqui:free.fr>:
-  o multipath update
-
-Kay Sievers:
-  o man page udevstart
-  o cleanup udevstart
-  o bugfix for local user
-  o unlink bugfix
-  o TODO update
-  o clarify udevinfo device walk
-  o udevinfo symlink reverse query
-  o fix stroul endptr use
-  o add $local user spport for permissions
-  o udev - man page update
-  o udev - fix debug info for multiple rule file config
-  o udev - kill udevd on install
-  o udev - activate formt length attribute
-  o udev - safer sprintf() use
-
-<md:linux.it>:
-  o no error on enoent
-  o escape dashes in man pages
-  o remove usage of expr in ide-devfs.sh
-
-<rml:ximian.com>:
-  o automatically install correct initscript
-  o update documetation for $local
-
-Andrey Borzenkov:
-  o Add symlink only rules support
-
-Greg Kroah-Hartman:
-  o update the TODO list as we already have a devfs config file
-  o make start_udev use udevstart binary
-  o install udevstart
-  o Remove Debian permission files as the Debian maintainer doesn't seem to want to share :(
-  o update the Gentoo rules files
-  o Add Red Hat rules and permissions files
-  o add udevstart to the ignore list
-  o add udevstart program based on a old patch from Harald Hoyer <harald@redhat.com>
-  o unlink the file before we try to create it
-  o Merge greg@bucket:/home/greg/src/udev into kroah.com:/home/greg/src/udev
-
-
-Summary of changes from v018 to v019
-============================================
-
-Kay Sievers:
-  o TODO update
-  o udev - correct relative symlink
-  o udev - safer string handling - part four
-  o udev - safer string handling - part three
-  o udev - safer string handling - part two
-  o udev - man page update
-  o udev - safer string handling all over the place
-  o manpage update
-  o udev - allow all files in a directory as the config
-  o udev - simple klibc textual uid/gid handling
-
-Andrey Borzenkov:
-  o do not remove real .udev.tdb during RPM build
-
-Greg Kroah-Hartman:
-  o add new TODO item about local user permissions
-  o Add initial SELinux support for udev
-  o fix build for very old versions of make
-  o remove limit of the number of args passed to PROGRAM
-  o force udev to include the internal version of libsysfs and never the external one
-  o fix up libsysfs header file usage to fix bug reports from users that have sysfsutils installed already
-  o remove udevtest on 'make clean'
-  o remove udevd priority TODO item, as it's not needed at all
-
-Patrick Mansfield:
-  o update udev scsi_id to scsi_id 0.4
-
-
-Summary of changes from v017 to v018
-============================================
-
-<ext.devoteam.varoqui:sncf.fr>:
-  o [PATCH] symlink dm-[0-9]* rule
-  o update extras/multipath
-
-<john-hotplug:fjellstad.org>:
-  o init.d debian patch
-
-Kay Sievers:
-  o udev - TODO update
-  o udev - add %s{filename} to man page
-  o udev - udevd/udevsend man page
-  o udev - switch callout part selector to {attribute}
-  o udev - switch SYSFS_file to SYSFS{file}
-  o udev - create all partitions of blockdevice
-  o allow SYSFS{file}
-  o Adding '%s' format specifier to NAME and SYMLINK
-
-Greg Kroah-Hartman:
-  o added some scsi_id files to the bk ignore file
-  o added scsi_id and some more documentation to the udev.spec file
-  o update udev.rules.gentoo with new config file format
-  o Update the Gentoo udev.rules and udev.permissions files
-  o Create a udev.rules.examples file to hold odd udev.rules
-  o add udevd priority issue to the TODO list
-  o more HOWTO cleanups
-  o add HOWTO detailing how to use udev to manage /dev
-  o mv libsysfs/libsysfs.h to libsysfs/sysfs/libsysfs.h to make it easier to use
-  o add start_udev init script
-  o add support for UDEV_NO_SLEEP env variable so Gentoo people will be happy
-  o start up udevd ourselves in the init script to give it some good priorities
-  o update the red hat init script to handle nodes that are not present
-  o add a "old style" SYSFS_attribute test to udev-test.pl
-  o Have udevsend report more info in debug mode
-  o Have udevd report it's version in debug mode
-  o fix up bug created for udevtest in previous partition creation patch
-  o update the udev.spec to add udevtest and make some more Red Hat suggested changes
-  o add ability to install udevtest to Makefile
-  o 017_bk mark
-  o Add another test to udev-test.pl and fix a bug when only running 1 test
-  o Fix bug where we did not use the "converted" kernel name if we had no rule
-
-Patrick Mansfield:
-  o udev use new libsysfs header file location
-  o udev add some ID tests
-
-
-Summary of changes from v016 to v017
-============================================
-
-<azarah:nosferatu.za.org>:
-  o make logging a config option
-
-<christophe.varoqui:free.fr>:
-  o more udev-016/extras/multipath
-  o more udev-016/extras/multipath
-  o update extras/multipath
-
-Kay Sievers:
-  o udev - keep private data out of the database?
-  o better credential patch
-  o udevd - client access authorization
-  o compile udevd with klibc
-  o udev - fix "ignore method"
-  o udev - fix cdrom symlink rule
-  o convert udevsend/udevd to DGRAM and single-threaded
-  o udevd - kill the lockfile
-  o udevd - fix socket path length
-  o udevd - switch socket path to abstract namespace
-  o udevd - allow to bypass sequence number
-  o include used function
-
-Greg Kroah-Hartman:
-  o add udev_log to the documentation
-  o fix offsetof() define in klibc
-  o add some .spec file changes from Red Hat
-  o update the init.d udev script based on a patch from Red Hat
-  o remove the .udev.tdb when installing or uninstalling to be safe
-  o remove the database at startup
-  o fix bug in permission handling
-  o update klibc to version .107
-  o update the bitkeeper ignore file list
-  o add udevtest program to build
-  o fix problem where usb devices can be either the main device or the interface
-  o more logging.h cleanups to be a bit more flexible
-  o stop using mode_t as different libcs define it in different ways :(
-  o remove some more KLIBC fixups that are no longer needed
-  o let udev-test.pl run an individual test if you ask it to
-  o Handle the '!' character that some block devices have
-  o add a block device with a ! in the name, and a test for this
-  o fix up 'make release' to use bk to build the export tree
-  o fix log option code so that it actually works for all udev programs
-  o finish syncing up with klibc
-  o sync with latest version of klibc (0.107)
-  o fix up Makefile dependancies for udev_version.h
-
-Patrick Mansfield:
-  o udev add wild card compare for ID
-  o udev kill extra bus_id compares in match_id
-
-
-Summary of changes from v015 to v016
-============================================
-
-<elkropac:students.zcu.cz>:
-  o get_dev_number() in extras/ide-devfs.sh
-
-<rrm3:rrm3.org>:
-  o FAQ udev.rules.devfs
-
-Greg Kroah-Hartman:
-  o add udevd and udevsend to the spec file
-  o make /etc/hotplug.d/default/udev.hotplug symlink point to udevsend now
-  o add KERNEL_DIR option so that the distros will be happy
-  o make udevsend binary even smaller
-  o udevsend now almost compiles with klibc, struct sockaddr_un is only problem now
-  o fix up logging code so that it can be built without it being enabled
-  o rework the logging code so that each program logs with the proper name in the syslog
-  o remove logging.c as it's no longer needed
-  o kill the last examples that contained the %D option
-  o remove a __KLIBC__ tests in libsysfs, as klibc now supports getpagesize()
-  o udevd - remove stupid locking error I wrote
-  o update to klibc version 0.101, fixing the stdin bug
-  o fix Makefile typo for USE_LSB install
-  o allow dbus code to actually build again
-
-Kay Sievers:
-  o let udevsend build with klibc
-  o udevd - config cleanup
-  o udevd - cleanup and better timeout handling
-  o fix possible buffer overflow
-  o udevd - next round of fixes
-  o udevinfo - missing options for man page
-  o udev - trivial style cleanup
-
-
-Summary of changes from v014 to v015
-============================================
-
-<mbuesch:freenet.de>:
-  o LFS init script update
-
-Greg Kroah-Hartman:
-  o update klibc to version 0.98
-  o clean up udevinfo on 'make clean'
-  o add udevinfo man page to spec file
-  o remove command line documentation from udev man page
-  o create initial version of udevinfo man page
-  o added URL to spec file
-  o add udevinfo to udev.spec file
-  o add udevinfo to install target of Makefile
-  o rip out command line code from udev, now that we have udevinfo
-  o udevinfo doesn't need to declare main_envp
-  o move get_pair to udev_config.c because udevinfo doesn't need all of namedev.o
-  o more makefile cleanups
-  o move udevinfo into the main build and clean up the main Makefile a bit
-  o clean up compiler warnings if building using klibc
-  o make udevd only have one instance running at a time
-  o new testd.block script for debugging
-  o udevsnd : clean up message creation logic a bit
-  o make bk ignore udevd and udevsend binaries
-  o whitespace cleanups
-  o remove TODO item about BUS value, as it is now done
-  o add support for figuring out which device on the sysfs "chain" the rule applies to
-
-Kay Sievers:
-  o udevinfo - now a real program :)
-  o udevd - cleanup and better timeout handling
-  o udev - next round of udev event order daemon
-  o fix udevd exec
-  o udev - udevinfo with device chain walk
-  o spilt udev into pieces
-
-
-Summary of changes from v013 to v014
-============================================
-
-<ananthmg:rediffmail.com>:
-  o libsysfs update for refresh + namedev.c changes
-
-<christophe.varoqui:free.fr>:
-  o udev-013/extras/multipath update
-
-<flamingice:sourmilk.net>:
-  o minor patch for devfs rules
-
-Kay Sievers:
-  o udev - program to query all device attributes to build a rule
-  o set default owner/group in db - update
-  o udev - reverse user query options
-  o udev - kill %D from udev-test.pl
-  o add udev logging to info log
-  o udev - mention format string escape char in man page
-
-Greg Kroah-Hartman:
-  o misc code cleanups
-  o fixup logging.h to handle different logging options properly
-  o clean up the logging patch a bit to make the option more like the other options
-  o remove the %D modifier as it is not longer needed
-  o remove unneeded keyboard rule
-  o add usb_host and pci_bus to the class blacklist
-  o added input device rules to udev.rules and udev.rules.devfs
-  o 013_bk mark
-
-Hanna V. Linder:
-  o set default owner/group in db
-  o small cut n paste error fix
-
-Patrick Mansfield:
-  o update udev scsi_id to scsi_id 0.3
-
-
-Summary of changes from v012 to v013
-============================================
-
-<eike-hotplug:sf-tec.de>:
-  o LSB init script and other stuff
-
-<elkropac:students.zcu.cz>:
-  o fix udev directory for Debian init script
-
-<tiggi:infa.abo.fi>:
-  o udev 012 old gcc fixup
-
-Christophe Saout:
-  o add IGNORE rule type
-  o small cleanup
-
-Greg Kroah-Hartman:
-  o update TODO with some new, small items
-  o Cset exclude: greg@kroah.com|ChangeSet|20040113010256|48515
-  o update the README in a few places
-  o fix -d typo in the manpage update
-  o Fix stupid gcc "optimization" of 1 character printk() calls.... Ick
-  o oops, forgot to fix up the PROGRAM result from ID to RESULT in the config files
-  o Add alsa device rules and a few other devfs rules
-  o fix a few stale comments in namedev.c
-  o convert the default rules files to the new format
-  o convert the test shell scripts to the config file format
-  o add bus test for usb-serial bus
-  o Add some helpful messages if the user uses the older config file format
-  o added dri rule to the default config file
-  o added init.d udev script for debian
-  o add a script that tests the IGNORE rule
-  o add silly script that names cdrom drives based on the cd in them
-  o add cdrom rule for ide cdrom
-  o replace list_for_each with list_for_each_entry, saving a few lines of code
-  o add a blacklist of class devices we do not want to look at
-
-Kay Sievers:
-  o fix klibc with printf() and gcc
-  o udev - small script optimization
-  o udev - introduce format escape char
-  o udev - more CALLOUT is PROGRAM now
-  o udev - CALLOUT is PROGRAM now
-  o update documentation for new config file format
-  o more advanced user query options
-  o udev - simple debug tweak
-  o udev - drop all methods :)
-  o udev - advanced user query options
-  o udev - Makefile error
-  o udev - make exec_callout() reusable
-  o udev - exec status fix for klibc
-  o fix Silly udev script
-
-
-Summary of changes from v011 to v012
-============================================
-
-<azarah:nosferatu.za.org>:
-  o make symlink work properly if there is already a file in its place
-  o Fix udev gcc-2.95.4 compat
-
-<christophe.varoqui:free.fr>:
-  o extras multipath update
-  o extras multipath update
-
-Kay Sievers:
-  o mention user callable udev + options in man page
-  o make udev user callable to query the database
-  o depend on all .h files
-  o cleanup namedev_parse debug text
-  o extend exec_program[]
-  o ide-devfs.sh update
-  o fix for apply_format()
-  o check for empty symlink string
-  o 'ide' missing in bus_files[]
-  o small trivial cleanup of latest changes
-
-<mbuesch:freenet.de>:
-  o introduce signal handler
-
-<rml:ximian.com>:
-  o udev spec file update
-
-Greg Kroah-Hartman:
-  o minor grammer fixes for the udev_vs_devfs document
-  o move the dbus config file to etc/dbus-1/system.d/
-  o move the config files to etc/udev to clean up main directory a bit
-  o add Gentoo versions of the rules and permissions files
-  o if using glibc, link dynamically, as no one like 500Kb udev binaries
-  o minor change to udev_vs_devfs document
-  o added udev vs devfs supid document to the tree
-  o move the signal handling registration to after we have initialized enough stuff
-  o make ide-devfs.sh executable in the tree
-  o udev.permissions.debian - forgot the dm nodes
-  o update the udev.permissions.debian file with new entries
-  o added udev.init script for the Linux From Scratch project
-
-
-
-Summary of changes from v010 to v011
-============================================
-
-<mbuesch:freenet.de>:
-  o proper cleanup on udevdb_init() failure
-
-<mh:nadir.org>:
-  o patch udev 009-010 rpm spec file
-
-<svetljo:gmx.de>:
-  o fix udev sed Makefile usage
-
-Greg Kroah-Hartman:
-  o add documentation about the BUS key being optional for the LABEL rule
-  o add tests for LABEL rule with a device that has no bus
-  o Don't require the BUS value for the LABEL rule
-  o If a LABEL rule has a BUS id, then we must check to see if the device is on a bus
-  o add documentation about the BUS key being optional for the CALLOUT rule
-  o If a CALLOUT rule has a BUS id, then we must check to see if the device is on a bus
-  o Don't require the BUS value for the CALLOUT rule
-  o add test for callout rule with a device that has no bus
-  o 010_bk stamp
-  o added different build options to the rpm udev.spec file
-  o add pci to the bus_files list
-  o check for empty line a bit better in the parser
-  o more init script cleanups, the stop target now calls udev to cleanup instead of just removing the whole /udev directory
-  o make udev init script run udev in the background to let startup go much faster
-  o fix long delay for all devices in namedev
-
-
-Summary of changes from v009 to v010
-============================================
-
-<ananth:in.ibm.com>:
-  o change pgsize
-
-<christophe.varoqui:free.fr>:
-  o extras multipath update
-  o extras multipath update
-  o extras multipath update
-  o extras multipath update
-
-Kay Sievers:
-  o fix udev-test.pl
-  o small cleanup udev-remove.c
-  o experimental CALLOUT script for devfs ide node creation with cd, disc, part
-  o add any valid device
-  o introduce format char 'k' for kernel-name
-  o trivial make fixes
-  o don't overwrite old config on install
-  o udev-remove.c cleanups
-  o bug in udev-remove.c
-  o trivial cleanup parser changes
-
-<roman.kagan:itep.ru>:
-  o fix comment and whitespace handling in config files
-
-Adam Kropelin:
-  o Allow build with empty EXTRAS
-
-Daniel E. F. Stekloff:
-  o libsysfs 0.4.0 patch
-  o fix scsi_id segfault with udev-009
-  o add libsysfs docs
-
-David T. Hollis:
-  o mark config files as such in the rpm spec file
-
-Greg Kroah-Hartman:
-  o fix complier warning in namedev.c
-  o add documentation for the new '%k' modifier (kernel name replacement)
-  o add documentation about the multiple sysfs values that are now allowed for the LABEL rule
-  o add tests for multi-file LABEL rules
-  o add ability to have up to 5 SYSFS_ file/value pairs for the LABEL rule
-  o Just live with a sleep(1) in namedev for now until libsysfs is fixed up
-  o try to wait until the proper device file shows up in sysfs
-  o remove unneeded TODO and FIXME entry
-  o clean up the stand-alone tests to work properly on other people's machines
-  o add tests to catch whitespace and comment config file parsing errors
-
-
-Summary of changes from v008 to v009
-============================================
-
-<christophe.varoqui:free.fr>:
-  o more extras/multipath changes
-  o and more extras/multipath updates
-  o more extras/multipath updates
-  o yet more extras/multipath
-  o more extras/multipath updates
-  o extras/multipath update
-
-<david:fubar.dk>:
-  o D-BUS patch for udev-008
-
-<eike-hotplug:sf-tec.de>:
-  o add init.d/udev to "make install"
-  o add init.d/udev to the spec file
-
-Kay Sievers:
-  o don't rely on field order in namedev_parse
-  o get part of callout return string
-  o remove '\n' from end of callout return
-  o man-page mention multiple symlinks
-  o allow multiple symlinks
-  o cleanup man & remove symlink comment
-  o experimental (very simple) SYMLINK creation
-  o man page beauty
-  o pattern match for label method
-  o a bug in linefeed removal
-
-<rml:ximian.com>:
-  o remove udev from runlevels on uninstall
-  o install initscript in udev rpm
-
-Daniel E. F. Stekloff:
-  o pre-libsysfs-0.4.0 patch
-
-Greg Kroah-Hartman:
-  o signal fixes due to klibc update
-  o sync klibc with release 0.95
-  o add mol permissions to the debian permissions file
-  o update the FAQ with info about bad modprobe events from the devfs scheme
-  o some cleanups due to the need for LABEL rules to use "SYSFS_" now
-  o Add restart target to the etc/init.d/udev script
-  o tweak the config file generation portion of the Makefile a bit
-  o change devfs disk name rule from 'disk' to 'disc'
-  o add vc support to udev.rules.devfs
-  o added a devfs udev config file from Marco d'Itri <md@Linux.IT>
-  o set default mode to 0600 to be safer
-  o Makefile tweaks for the DBUS build
-  o update the FAQ due to the latest devfs mess on lkml and also due to symlinks now working
-  o document the different Makefile config options that we have
-  o change USE_DBUS to DBUS in Makefile, and disable it by default as it's still to hard to build on all systems
-  o fix formatting of udev_dbus.c to use tabs.  Also get it to build properly now
-  o move all of the DBUS logic into one file and remove all of the #ifdef crud from the main code
-
-Olaf Hering:
-  o dump latest klibc into the udev build tree
-  o use udevdir in udev.conf
-
-Patrick Mansfield:
-  o better allow builds of extras programs under udev
-  o update udev extras/scsi_id to version 0.2
-
-
-Summary of changes from v007 to v008
-============================================
-
-<azarah:nosferatu.za.org>:
-  o more config file parsing robustness
-
-<christophe.varoqui:free.fr>:
-  o udev-007/extras/multipath update
-
-Arnd Bergmann:
-  o Build failure - missing linux/limits.h include?
-  o Add format modifier for devfs like naming
-  o klibc makefile fixes
-
-Daniel E. F. Stekloff:
-  o another patch for path problem
-  o quick fix for libsysfs bus
-  o libsysfs changes for sysfsutils 0.3.0
-
-Greg Kroah-Hartman:
-  o fix up some duplicated function compiler warnings in libsysfs
-  o fix some compiler warnings in the tdb code
-  o Added Kay's name to the man page
-  o update the wildcard documentation in the man page to show the new styles supported
-  o fix permission handling logic
-  o enable default_mode ability to actually build
-  o add support for the default_mode variable, as it is documented
-  o show permissions and groups in the label_test
-  o remove some items off of the TODO list, as they are now done
-  o fix up the tests to work without all of the environ variables
-  o get rid of the majority of the debug environment variables
-  o Update the man page to show the new config file, it's format, and how to use it
-  o fix up the tests to support the rules file name change
-  o add support for a main udev config file, udev.conf
-  o turn debugging messages off by default
-  o split out the namedev config parsing logic to namedev_parse.c
-  o rename namedev's get_attr() to be main namedev_name_device() as that's what it really is
-  o add devfs like tty rules as an example in the default config file
-  o operate on the rules in the order they are in the config file (within the rule type) instead of operating on them backwards.
-  o Cset exclude: dsteklof@us.ibm.com|ChangeSet|20031126173159|56255
-  o add test for checking the BUS value
-  o fix problem where we were not looking at the BUS value
-  o add scsi and pci bus links in the test sysfs tree
-  o add test and documentation for new %D devfs format modifier
-  o changed the default location of the database to /udev/.udev.tdb to be LSB compliant
-  o get rid of functions in klibc_fixups that are now in klibc
-  o sync up with the 0.84 version of klibc
-  o fix udev init.d script to handle all class devices in sysfs
-  o fix the test.block and test.tty scripts due to their moveing.  Also add a test.all script
-  o 007_bk version change to Makefile
-
-Kay Sievers:
-  o pattern matching for namedev
-  o catch replace device by wildcard
-  o udev.8 tweak numeric id text
-  o udev-test.pl add subdir test
-  o namedev.c strcat tweak
-  o overall whitespace + debug text conditioning
-  o udev-test.pl - tweaks
-
-Martin Hicks:
-  o Add -nodefaultlibs while compiling against klibc
-
-Olaf Hering:
-  o ARCH detection for ppc
-
-Patrick Mansfield:
-  o fix udev parallel builds with klibc
-
-
-Summary of changes from v006 to v007
-============================================
-
-<md:linux.it>:
-  o fix segfault in parsing bad udev.permissions file
-
-Greg Kroah-Hartman:
-  o update default config file with a CALLOUT rule, and more documentation
-  o updated the man page with the latest format specifier changes
-  o added ability to put format specifiers in the CALLOUT program string
-  o tweak udev-test.pl to report '0' errors if that's what happened
-  o only build klibc_fixups.c if we are actually using klibc
-  o add support for string group and string user names in udev.permissions
-  o add getgrnam and getpwnam to klibc_fixups files
-  o remove Makefile.klibc
-  o add udev-test perl script from Kay Sievers <kay.sievers@vrfy.org> which blows away my puny shell scripts
-  o added debian's version of udev.permissions
-  o change to 006_bk version
-
-Kay Sievers:
-  o format char for CALLOUT output
-  o more namedev whitespace cleanups
-  o support arguments in callout exec
-  o namedev.c - change order of fields in CALLOUT
-  o namedev.c whitespace + debug text cleanup
-  o man page with udev.permissions wildcard
-
-Olaf Hering:
-  o static klibc udev does not link against crt0.o
-
-Summary of changes from v005 to v006
-============================================
-
-<chris_friesen:sympatico.ca>:
-  o faster test scripts
-
-Arnd Bergmann:
-  o more robust config file parsing in namedev.c
-  o add bus id modifier
-
-Daniel E. F. Stekloff:
-  o patch for libsysfs sysfs directory handling
-
-Greg Kroah-Hartman:
-  o add another line to udev.permissions in the proper format
-  o tweak replace_test
-  o fix permissions to work properly now
-  o add real udev.permissions file to test directory
-  o fix namedev.c to build with older version of gcc
-  o add dumb test for all of the different modifiers
-  o update the TODO list with more items that people can easily do
-  o move the test.block and test.tty scripts to the test/ directory
-  o add remove actions to the test scripts
-  o turn DEBUG_PARSER off by default
-  o add some documentation for the %b modifier to the default config file
-  o fix make install rule for when the udev symlink is already there
-  o change release target in makefile
-  o change debug level on printf values for now
-  o updated demo config file
-  o add some documentation of the modifiers to the default config file
-  o add demo config file
-  o updated bk ignore list for klibc generated files
-  o add printf option to label test to verify it works
-  o fix up printf-like functionality due to previous changes
-  o get the major/minor number before we name the device
-  o add scsi_id "extra" program from Patrick Mansfield <patmans@us.ibm.com>
-  o Add multipath "extra" program from Christophe Varoqui, <christophe.varoqui@free.fr>
-  o trailing whitespace cleanups
-  o splig LABEL and NUMBER into separate functions
-  o add TOPO regression test
-  o move TOPOLOGY rule to it's own function
-  o fix bug where NUMBER and TOPOLOGY would not work for partitions
-  o clean up the way we find the sysdevice for a block device for namedev
-  o updated label test script (tests for partitions now.)
-  o split REPLACE and CALLOUT into separate functions
-  o add debug line for REPLACE call
-  o add replace test
-  o add more sysfs test tree files
-  o change UDEV_SYSFS_PATH environment variable due to libsysfs change
-  o fix bug in klibc's isspace function
-  o fix udev-add.c to build properly with older versions of gcc
-  o add prototype for ftruncate to klibc
-  o Remove a few items from the TODO list that are already done
-  o version number to 005_bk
-  o pull some klibc stuff into the make Makefile to try to stay in sync
-  o klibc build fixes
-
-Kay Sievers:
-  o apply permissions.conf support for wildcard and default name
-  o man page with included placeholder list
-  o implement printf-like placeholder support for NAME
-  o more manpage tweaks
-  o add support for subdirs
-  o add uid/gid to nodes
-
-Olaf Hering:
-  o DESTDIR for udev
-
-Paul Mundt:
-  o Fixup path for kernel includes when building with klibc
-
-Robert Love:
-  o udev init script
-
-
-Summary of changes from v004 to v005
-============================================
-
-<kay:vrfy.org>:
-  o namedev.c comments + debug patch
-  o man page update
-
-Greg Kroah-Hartman:
-  o ignore the klibc/linux symlink
-  o add klibc linux symlink info to the README
-  o get 'make release' to work properly again
-  o added README info for how to build using klibc
-  o turn off debugging if we are building with klibc
-  o turn off debugging in namedev
-  o added vsyslog support to klibc
-  o add ftruncate to klibc
-  o klibc specific tweaks
-  o libsysfs does not need mntent.h in it's header file
-  o udev build tweaks to tdb's spinlock code
-  o klibc makefile changes
-  o build tdb and libsysfs from the same makefile as udev
-  o udev-add build cleanups for other libc versions
-  o tweak tdb to build within udev better
-  o make libsysfs spit debug messages to the same place as the rest of udev
-  o make libsysfs build cleanly
-  o updated bk ignore list
-  o added klibc version 0.82 (cvs tree) to the udev tree
-  o makefile fix for now
-  o Merge greg@bucket:/home/greg/src/udev into kroah.com:/home/greg/src/udev
-  o hm, makefile bug with so many files...  will fix later
-  o regression tests starting to be added
-  o fix LABEL bug for device files (not class files.)
-  o more warning flags to the build
-  o got rid of struct device_attr
-  o rename namedev.permissions and namedev.config to udev.permissions and udev.config
-  o fix dbg line in namedev.c
-  o more overrides of config info with env variables if in test mode
-  o Fix bug causing udev to sleep forever waiting for dev file to show up
-  o change version to 004_bk
-  o make config files, sysfs root, and udev root configurable from config variables
-
-Robert Love:
-  o udev: sleep_for_dev() bits
-  o udev: another canidate for static
-
-
-Summary of changes from v003 to v004
-============================================
-
-Daniel E. F. Stekloff:
-  o new version of libsysfs patch
-
-Greg Kroah-Hartman:
-  o 004 release
-  o major database cleanups
-  o Changed test.block and test.tty to take ACTION from the command line
-  o don't sleep if 'dev' file is already present on device add
-  o fix comment about how the "dev" file is made up
-  o more database work.  Now we only store the info we really need right now
-  o add BUS= bug to TODO list so it will not get forgotten
-  o spec file changes
-  o test.block changes
-  o ok, rpm likes the "_" character instead of "-" better
-  o change the version to 003-bk to keep things sane with people using the bk tree
-  o got "remove of named devices" working
-  o fix segfaults when dealing with partitions
-
-Kay Sievers:
-  o man file update
-  o man page update
-
-Robert Love:
-  o udev: mode should be mode_t
-  o udev: trivial trivialities
-  o udev: cool test scripts again
-  o udev spec file symlink support
-  o udev: cool test scripts
-  o udev spec file bits
-
-
-Summary of changes from v0.2 to v003
-============================================
-
-Daniel E. F. Stekloff:
-  o udevdb patch
-  o udevdb prototype
-
-Greg Kroah-Hartman:
-  o update the spec file for the new version and install process
-  o fix makefile release rule to not drop tdb.h file
-  o Add FAQ for udev
-  o removed AUTHORS and INSTALL files as they were pretty pointless
-  o copyright updates
-  o Add AUTHORS and INSTALL files
-  o TODO updates
-  o Updatd the README
-  o updated the TODO list
-  o add udev man page (basically just a place holder for now.)
-  o added uninstall support
-  o added install target for makefile so people don't have to do it by hand anymore
-  o add version to debug log on startup
-  o tell the user what mknod() we are trying to do
-  o add dbg_parse() to cut down on parse file debugging statements
-  o put config files and database in /etc/udev by default
-  o add ols 2003 udev paper to docs/
-  o clean up some debugging stuff in namedev.c
-  o do not build the tdb binary programs, only the objects
-  o merge tdb into the build process
-  o Added tdb code from latest cvs version in the samba tree
-  o added my name to the .spec file
-  o minor cleanups
-  o cleanup the mknod code a bit
-  o remove mknod callout
-  o handle new major:minor format of dev files that showed up in 2.6.0-test2-bk3 or so
-  o oops, everything was getting created as 000 mode, try to fix this up, but fail...
-  o more test stuff
-
-Olaf Hering:
-  o print udev pid
-
-Patrick Mansfield:
-  o add callout config type to udev
-
-Paul Mundt:
-  o Fix TDB cross compilation
-  o udev spec file
-  o udev/libsysfs cross compile fixes
-
-
-Summary of changes from v0.1 to v0.2
-============================================
-
-Greg Kroah-Hartman:
-  o more test stuff
-  o removed unneeded stuff from udev.h
-  o added 0.2 change log info
-  o start working on label support, and fix some segfaults for block devices
-  o test config file changes
-  o add NUMBER support (basically same logic as TOPOLOGY, perhaps we should
-    merge this...)
-  o added topology support
-  o got REPLACE to work properly
-  o make struct config_device contain a struct device_attr instead of
-    duplicating the mess
-  o block test
-  o split the tests up into different files
-  o split udev main logic into udev-add and udev-remove
-  o Clean up the namedev interface a bit, making the code smaller
-  o bk: update ignore list
-  o update the tests to handle block devices too
-  o add initial libsysfs support
-  o added libsysfs to the build
-  o added libsysfs code from sysutils-0.1.1-071803 release
-  o namedev config files are fully parsed
-  o more permission tests
-  o make log_message spit out warnings so I don't have to spend forever
-    chasing down stupid bugs that aren't there...
-  o added klibc makefile
-  o Initial namedev parsing of config files
-  o sleep for 2 seconds to give the kernel a chance to actually create the
-    files we need
-  o pick a better default UDEV_ROOT
-  o fix up the test to actually work
-  o added more documentation in README and TODO files
-
-
-Summary of changes up to v0.1
-============================================
-
-Greg Kroah-Hartman:
-  o added more documentation in README and TODO files
-  o updated the documentation
-  o cleaned up the makefile a bit
-  o remove now works!
-  o restructure code to be able to actually get remove_node() to work
-  o Creating nodes actually works
-  o added stupid test script for debugging
-  o added initial documentation and gpl license
-  o enabled debugging
-  o updated ignore list
-  o added initial files
-  o fixed up config
-  o Initial repository create
-  o BitKeeper file /home/greg/src/udev/udev/ChangeSet
-
diff --git a/src/udev/INSTALL b/src/udev/INSTALL
deleted file mode 100644
index 0a34e77df..000000000
--- a/src/udev/INSTALL
+++ /dev/null
@@ -1,44 +0,0 @@
-The options used usually look like:
-  %configure \
-    --prefix=/usr \
-    --sysconfdir=/etc \
-    --bindir=/usr/bin \
-    --libdir=/usr/lib64 \
-    --libexecdir=/usr/lib \
-    --with-systemdsystemunitdir=/usr/lib/systemd/system \
-    --with-selinux
-
-The options used in a RPM spec file look like:
-  %configure \
-    --prefix=%{_prefix} \
-    --sysconfdir=%{_sysconfdir} \
-    --bindir=%{_bindir} \
-    --libdir=%{_libdir} \
-    --libexecdir=%{_prefix}/lib \
-    --with-systemdsystemunitdir=%{_prefix}/lib/systemd/system \
-    --with-selinux
-
-The options to install udev in the rootfs instead of /usr,
-and udevadm in /sbin:
-    --prefix=%{_prefix} \
-    --with-rootprefix= \
-    --sysconfdir=%{_sysconfdir} \
-    --bindir=/sbin \
-    --libdir=%{_libdir} \
-    --with-rootlibdir=/lib64 \
-    --libexecdir=/lib \
-    --with-systemdsystemunitdir=/lib/systemd/system \
-    --with-selinux
-
-Some tools expect udevadm in 'sbin'. A symlink to udevadm in 'bin'
-needs to be manually created if needed.
-
-The defined location for scripts and binaries which are called
-from rules is (/usr)/lib/udev/ on all systems and architectures. Any
-other location will break other packages, who rightfully expect
-the (/usr)/lib/udev/ directory, to install their rule helper and udev
-rule files.
-
-Default udev rules and persistent device naming rules may be required
-by other software that depends on the data udev collects from the
-devices.
diff --git a/src/udev/Makefile.am b/src/udev/Makefile.am
deleted file mode 100644
index 1c7f86b08..000000000
--- a/src/udev/Makefile.am
+++ /dev/null
@@ -1,712 +0,0 @@
-# Copyright (C) 2008-2012 Kay Sievers <kay.sievers@vrfy.org>
-# Copyright (C) 2009 Diego Elio 'Flameeyes' Pettenò <flameeyes@gmail.com>
-
-SUBDIRS = .
-
-ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
-
-AM_MAKEFLAGS = --no-print-directory
-
-LIBUDEV_CURRENT=13
-LIBUDEV_REVISION=2
-LIBUDEV_AGE=13
-
-LIBGUDEV_CURRENT=1
-LIBGUDEV_REVISION=1
-LIBGUDEV_AGE=1
-
-AM_CPPFLAGS = \
-	-include $(top_builddir)/config.h \
-	-I$(top_srcdir)/src \
-	-DSYSCONFDIR=\""$(sysconfdir)"\" \
-	-DPKGLIBEXECDIR=\""$(libexecdir)/udev"\"
-
-AM_CFLAGS = \
-	${my_CFLAGS} \
-	-fvisibility=hidden \
-	-ffunction-sections \
-	-fdata-sections
-
-AM_LDFLAGS = \
-	-Wl,--gc-sections \
-	-Wl,--as-needed
-
-DISTCHECK_CONFIGURE_FLAGS = \
-	--enable-debug \
-	--enable-rule_generator \
-	--enable-floppy \
-	--with-selinux \
-	--enable-gtk-doc \
-	--with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)
-
-BUILT_SOURCES =
-EXTRA_DIST =
-CLEANFILES =
-INSTALL_EXEC_HOOKS =
-INSTALL_DATA_HOOKS =
-UNINSTALL_EXEC_HOOKS =
-DISTCHECK_HOOKS =
-DISTCLEAN_LOCAL_HOOKS =
-
-udevhomedir = $(libexecdir)/udev
-udevhome_SCRIPTS =
-dist_udevhome_SCRIPTS =
-dist_udevhome_DATA =
-dist_man_MANS =
-
-SED_PROCESS = \
-	$(AM_V_GEN)$(MKDIR_P) $(dir $@) && $(SED) \
-	-e 's,@VERSION\@,$(VERSION),g' \
-	-e 's,@prefix\@,$(prefix),g' \
-	-e 's,@rootprefix\@,$(rootprefix),g' \
-	-e 's,@exec_prefix\@,$(exec_prefix),g' \
-	-e 's,@libdir\@,$(libdir),g' \
-	-e 's,@includedir\@,$(includedir),g' \
-	-e 's,@bindir\@,$(bindir),g' \
-	-e 's,@pkglibexecdir\@,$(libexecdir)/udev,g' \
-	< $< > $@ || rm $@
-
-%.pc: %.pc.in Makefile
-	$(SED_PROCESS)
-
-%.rules: %.rules.in Makefile
-	$(SED_PROCESS)
-
-%.service: %.service.in Makefile
-	$(SED_PROCESS)
-
-%.sh: %.sh.in Makefile
-	$(SED_PROCESS)
-	$(AM_V_GEN)chmod +x $@
-
-%.pl: %.pl.in Makefile
-	$(SED_PROCESS)
-	$(AM_V_GEN)chmod +x $@
-
-# ------------------------------------------------------------------------------
-SUBDIRS += src/docs
-
-include_HEADERS = src/libudev.h
-lib_LTLIBRARIES = libudev.la
-noinst_LTLIBRARIES = libudev-private.la
-
-libudev_la_SOURCES =\
-	src/libudev-private.h \
-	src/libudev.c \
-	src/libudev-list.c \
-	src/libudev-util.c \
-	src/libudev-device.c \
-	src/libudev-enumerate.c \
-	src/libudev-monitor.c \
-	src/libudev-queue.c
-
-libudev_la_LDFLAGS = \
-	$(AM_LDFLAGS) \
-	-version-info $(LIBUDEV_CURRENT):$(LIBUDEV_REVISION):$(LIBUDEV_AGE)
-
-libudev_private_la_SOURCES =\
-	$(libudev_la_SOURCES) \
-	src/libudev-util-private.c \
-	src/libudev-device-private.c \
-	src/libudev-queue-private.c
-
-if WITH_SELINUX
-libudev_private_la_SOURCES += src/libudev-selinux-private.c
-libudev_private_la_LIBADD = $(SELINUX_LIBS)
-endif
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = src/libudev.pc
-EXTRA_DIST += src/libudev.pc.in
-CLEANFILES += src/libudev.pc
-
-EXTRA_DIST += src/COPYING
-# move lib from $(libdir) to $(rootlib_execdir) and update devel link, if needed
-libudev-install-move-hook:
-	if test "$(libdir)" != "$(rootlib_execdir)"; then \
-		mkdir -p $(DESTDIR)$(rootlib_execdir) && \
-		so_img_name=$$(readlink $(DESTDIR)$(libdir)/libudev.so) && \
-		so_img_rel_target_prefix=$$(echo $(libdir) | sed 's,\(^/\|\)[^/][^/]*,..,g') && \
-		ln -sf $$so_img_rel_target_prefix$(rootlib_execdir)/$$so_img_name $(DESTDIR)$(libdir)/libudev.so && \
-		mv $(DESTDIR)$(libdir)/libudev.so.* $(DESTDIR)$(rootlib_execdir); \
-	fi
-
-libudev-uninstall-move-hook:
-	rm -f $(DESTDIR)$(rootlib_execdir)/libudev.so*
-
-INSTALL_EXEC_HOOKS += libudev-install-move-hook
-UNINSTALL_EXEC_HOOKS += libudev-uninstall-move-hook
-
-# ------------------------------------------------------------------------------
-udev-confdirs:
-	-mkdir -p $(DESTDIR)$(sysconfdir)/udev/rules.d
-	-mkdir -p $(DESTDIR)$(libexecdir)/udev/devices
-
-INSTALL_DATA_HOOKS += udev-confdirs
-
-udevrulesdir = $(libexecdir)/udev/rules.d
-dist_udevrules_DATA = \
-	rules/42-usb-hid-pm.rules \
-	rules/50-udev-default.rules \
-	rules/60-persistent-storage-tape.rules \
-	rules/60-persistent-serial.rules \
-	rules/60-persistent-input.rules \
-	rules/60-persistent-alsa.rules \
-	rules/60-persistent-storage.rules \
-	rules/75-net-description.rules \
-	rules/75-tty-description.rules \
-	rules/78-sound-card.rules \
-	rules/80-drivers.rules \
-	rules/95-udev-late.rules
-
-udevconfdir = $(sysconfdir)/udev
-dist_udevconf_DATA = src/udev.conf
-
-sharepkgconfigdir = $(datadir)/pkgconfig
-sharepkgconfig_DATA = src/udev.pc
-EXTRA_DIST += src/udev.pc.in
-CLEANFILES += src/udev.pc
-
-if WITH_SYSTEMD
-dist_systemdsystemunit_DATA = \
-	src/udev-control.socket \
-	src/udev-kernel.socket
-
-systemdsystemunit_DATA = \
-	src/udev.service \
-	src/udev-trigger.service \
-	src/udev-settle.service
-
-EXTRA_DIST += \
-	src/udev.service.in \
-	src/udev-trigger.service.in \
-	src/udev-settle.service.in
-
-CLEANFILES += \
-	src/udev.service \
-	src/udev-trigger.service \
-	src/udev-settle.service
-
-systemd-install-hook:
-	mkdir -p $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants
-	ln -sf ../udev-control.socket $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants/udev-control.socket
-	ln -sf ../udev-kernel.socket $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants/udev-kernel.socket
-	mkdir -p $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants
-	ln -sf ../udev.service $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants/udev.service
-	ln -sf ../udev-trigger.service $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants/udev-trigger.service
-
-INSTALL_DATA_HOOKS += systemd-install-hook
-endif
-
-bin_PROGRAMS = \
-	udevadm
-
-pkglibexec_PROGRAMS = \
-	udevd
-
-udev_common_sources = \
-	src/udev.h \
-	src/udev-event.c \
-	src/udev-watch.c \
-	src/udev-node.c \
-	src/udev-rules.c \
-	src/udev-ctrl.c \
-	src/udev-builtin.c \
-	src/udev-builtin-blkid.c \
-	src/udev-builtin-firmware.c \
-	src/udev-builtin-hwdb.c \
-	src/udev-builtin-input_id.c \
-	src/udev-builtin-kmod.c \
-	src/udev-builtin-path_id.c \
-	src/udev-builtin-usb_id.c
-
-udev_common_CFLAGS = \
-	$(BLKID_CFLAGS) \
-	$(KMOD_CFLAGS)
-
-udev_common_LDADD = \
-	libudev-private.la \
-	$(BLKID_LIBS) \
-	$(KMOD_LIBS)
-
-udev_common_CPPFLAGS = \
-	$(AM_CPPFLAGS) \
-	-DFIRMWARE_PATH="$(FIRMWARE_PATH)" \
-	-DUSB_DATABASE=\"$(USB_DATABASE)\" -DPCI_DATABASE=\"$(PCI_DATABASE)\"
-
-udevd_SOURCES = \
-	$(udev_common_sources) \
-	src/udevd.c \
-	src/sd-daemon.h \
-	src/sd-daemon.c
-udevd_CFLAGS = $(udev_common_CFLAGS)
-udevd_LDADD = $(udev_common_LDADD)
-udevd_CPPFLAGS = $(udev_common_CPPFLAGS)
-
-udevadm_SOURCES = \
-	$(udev_common_sources) \
-	src/udevadm.c \
-	src/udevadm-info.c \
-	src/udevadm-control.c \
-	src/udevadm-monitor.c \
-	src/udevadm-settle.c \
-	src/udevadm-trigger.c \
-	src/udevadm-test.c \
-	src/udevadm-test-builtin.c
-udevadm_CFLAGS = $(udev_common_CFLAGS)
-udevadm_LDADD = $(udev_common_LDADD)
-udevadm_CPPFLAGS = $(udev_common_CPPFLAGS)
-
-# ------------------------------------------------------------------------------
-if ENABLE_MANPAGES
-dist_man_MANS += \
-	src/udev.7 \
-	src/udevadm.8 \
-	src/udevd.8
-endif
-
-EXTRA_DIST += \
-	src/udev.xml \
-	src/udevadm.xml \
-	src/udevd.xml
-
-if HAVE_XSLTPROC
-dist_noinst_DATA = \
-	src/udev.html \
-	src/udevadm.html \
-	src/udevd.html
-
-src/%.7 src/%.8 : src/%.xml
-	$(AM_V_GEN)$(XSLTPROC) -o $@ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
-
-src/%.html : src/%.xml
-	$(AM_V_GEN)$(XSLTPROC) -o $@ -nonet http://docbook.sourceforge.net/release/xsl/current/xhtml-1_1/docbook.xsl $<
-endif
-
-# ------------------------------------------------------------------------------
-TESTS = \
-	test/udev-test.pl \
-	test/rules-test.sh
-
-check_PROGRAMS = \
-	test-libudev \
-	test-udev
-
-test_libudev_SOURCES = src/test-libudev.c
-test_libudev_LDADD = libudev.la
-
-test_udev_SOURCES = \
-	$(udev_common_sources) \
-	src/test-udev.c
-test_udev_CFLAGS = $(udev_common_CFLAGS)
-test_udev_LDADD = $(udev_common_LDADD)
-test_udev_CPPFLAGS = $(udev_common_CPPFLAGS)
-test_udev_DEPENDENCIES = test/sys
-
-# packed sysfs test tree
-test/sys:
-	$(AM_V_GEN)mkdir -p test && tar -C test/ -xJf $(top_srcdir)/test/sys.tar.xz
-
-test-sys-distclean:
-	-rm -rf test/sys
-DISTCLEAN_LOCAL_HOOKS += test-sys-distclean
-
-EXTRA_DIST += test/sys.tar.xz
-
-# ------------------------------------------------------------------------------
-ata_id_SOURCES = src/ata_id/ata_id.c
-ata_id_LDADD = libudev-private.la
-pkglibexec_PROGRAMS += ata_id
-
-# ------------------------------------------------------------------------------
-cdrom_id_SOURCES = src/cdrom_id/cdrom_id.c
-cdrom_id_LDADD = libudev-private.la
-pkglibexec_PROGRAMS += cdrom_id
-dist_udevrules_DATA += src/cdrom_id/60-cdrom_id.rules
-
-# ------------------------------------------------------------------------------
-collect_SOURCES = src/collect/collect.c
-collect_LDADD = libudev-private.la
-pkglibexec_PROGRAMS += collect
-
-# ------------------------------------------------------------------------------
-scsi_id_SOURCES =\
-	src/scsi_id/scsi_id.c \
-	src/scsi_id/scsi_serial.c \
-	src/scsi_id/scsi.h \
-	src/scsi_id/scsi_id.h
-scsi_id_LDADD = libudev-private.la
-pkglibexec_PROGRAMS += scsi_id
-dist_man_MANS += src/scsi_id/scsi_id.8
-EXTRA_DIST += src/scsi_id/README
-
-# ------------------------------------------------------------------------------
-v4l_id_SOURCES = src/v4l_id/v4l_id.c
-v4l_id_LDADD = libudev-private.la
-pkglibexec_PROGRAMS += v4l_id
-dist_udevrules_DATA += src/v4l_id/60-persistent-v4l.rules
-
-# ------------------------------------------------------------------------------
-accelerometer_SOURCES = src/accelerometer/accelerometer.c
-accelerometer_LDADD = libudev-private.la -lm
-pkglibexec_PROGRAMS += accelerometer
-dist_udevrules_DATA += src/accelerometer/61-accelerometer.rules
-
-# ------------------------------------------------------------------------------
-if ENABLE_GUDEV
-SUBDIRS += src/gudev/docs
-
-libgudev_includedir=$(includedir)/gudev-1.0/gudev
-libgudev_include_HEADERS = \
-	src/gudev/gudev.h \
-	src/gudev/gudevenums.h \
-	src/gudev/gudevenumtypes.h \
-	src/gudev/gudevtypes.h \
-	src/gudev/gudevclient.h \
-	src/gudev/gudevdevice.h \
-	src/gudev/gudevenumerator.h
-
-lib_LTLIBRARIES += libgudev-1.0.la
-
-pkgconfig_DATA += src/gudev/gudev-1.0.pc
-EXTRA_DIST += src/gudev/gudev-1.0.pc.in
-CLEANFILES += src/gudev/gudev-1.0.pc
-
-libgudev_1_0_la_SOURCES = \
-	src/gudev/gudevenums.h \
-	src/gudev/gudevenumtypes.h \
-	src/gudev/gudevenumtypes.h\
-	src/gudev/gudevtypes.h \
-	src/gudev/gudevclient.h \
-	src/gudev/gudevclient.c \
-	src/gudev/gudevdevice.h \
-	src/gudev/gudevdevice.c \
-	src/gudev/gudevenumerator.h \
-	src/gudev/gudevenumerator.c \
-	src/gudev/gudevprivate.h
-
-nodist_libgudev_1_0_la_SOURCES = \
-	src/gudev/gudevmarshal.h \
-	src/gudev/gudevmarshal.c \
-	src/gudev/gudevenumtypes.h \
-	src/gudev/gudevenumtypes.c
-BUILT_SOURCES += $(nodist_libgudev_1_0_la_SOURCES)
-
-libgudev_1_0_la_CPPFLAGS = \
-	$(AM_CPPFLAGS) \
-	-I$(top_builddir)/src\
-	-I$(top_srcdir)/src\
-	-I$(top_builddir)/src/gudev \
-	-I$(top_srcdir)/src/gudev \
-	-D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT \
-	-D_GUDEV_COMPILATION \
-	-DG_LOG_DOMAIN=\"GUdev\"
-
-libgudev_1_0_la_CFLAGS = \
-	-fvisibility=default \
-	$(GLIB_CFLAGS)
-
-libgudev_1_0_la_LIBADD = libudev.la $(GLIB_LIBS)
-
-libgudev_1_0_la_LDFLAGS = \
-	-version-info $(LIBGUDEV_CURRENT):$(LIBGUDEV_REVISION):$(LIBGUDEV_AGE) \
-	-export-dynamic -no-undefined \
-	-export-symbols-regex '^g_udev_.*'
-
-EXTRA_DIST += \
-	src/gudev/COPYING \
-	src/gudev/gudevmarshal.list \
-	src/gudev/gudevenumtypes.h.template \
-	src/gudev/gudevenumtypes.c.template \
-	src/gudev/gjs-example.js \
-	src/gudev/seed-example-enum.js \
-	src/gudev/seed-example.js
-
-src/gudev/gudevmarshal.h: src/gudev/gudevmarshal.list
-	$(AM_V_GEN)glib-genmarshal $< --prefix=g_udev_marshal --header > $@
-
-src/gudev/gudevmarshal.c: src/gudev/gudevmarshal.list
-	$(AM_V_GEN)echo "#include \"gudevmarshal.h\"" > $@ && \
-	glib-genmarshal $< --prefix=g_udev_marshal --body >> $@
-
-src/gudev/gudevenumtypes.h: src/gudev/gudevenumtypes.h.template src/gudev/gudevenums.h
-	$(AM_V_GEN)glib-mkenums --template $^ > \
-	    $@.tmp && mv $@.tmp $@
-
-src/gudev/gudevenumtypes.c: src/gudev/gudevenumtypes.c.template src/gudev/gudevenums.h
-	$(AM_V_GEN)glib-mkenums --template $^ > \
-	    $@.tmp && mv $@.tmp $@
-
-if ENABLE_INTROSPECTION
-src/gudev/GUdev-1.0.gir: libgudev-1.0.la $(G_IR_SCANNER)
-	$(AM_V_GEN)$(G_IR_SCANNER) -v \
-		--warn-all \
-		--namespace GUdev \
-		--nsversion=1.0 \
-		--include=GObject-2.0 \
-		--library=gudev-1.0 \
-		--library-path=$(top_builddir)/src \
-		--library-path=$(top_builddir)/src/gudev \
-		--output $@ \
-		--pkg=glib-2.0 \
-		--pkg=gobject-2.0 \
-		--pkg-export=gudev-1.0 \
-		--c-include=gudev/gudev.h \
-		-I$(top_srcdir)/src/\
-		-I$(top_builddir)/src/\
-		-D_GUDEV_COMPILATION \
-		-D_GUDEV_WORK_AROUND_DEV_T_BUG \
-		$(top_srcdir)/src/gudev/gudev.h \
-		$(top_srcdir)/src/gudev/gudevtypes.h \
-		$(top_srcdir)/src/gudev/gudevenums.h \
-		$(or $(wildcard $(top_builddir)/src/gudev/gudevenumtypes.h),$(top_srcdir)/src/gudev/gudevenumtypes.h) \
-		$(top_srcdir)/src/gudev/gudevclient.h \
-		$(top_srcdir)/src/gudev/gudevdevice.h \
-		$(top_srcdir)/src/gudev/gudevenumerator.h \
-		$(top_srcdir)/src/gudev/gudevclient.c \
-		$(top_srcdir)/src/gudev/gudevdevice.c \
-		$(top_srcdir)/src/gudev/gudevenumerator.c
-
-src/gudev/GUdev-1.0.typelib: src/gudev/GUdev-1.0.gir $(G_IR_COMPILER)
-	$(AM_V_GEN)g-ir-compiler $< -o $@
-
-girdir = $(GIRDIR)
-gir_DATA = src/gudev/GUdev-1.0.gir
-
-typelibsdir = $(GIRTYPELIBDIR)
-typelibs_DATA = src/gudev/GUdev-1.0.typelib
-
-CLEANFILES += $(gir_DATA) $(typelibs_DATA)
-endif # ENABLE_INTROSPECTION
-
-# move lib from $(libdir) to $(rootlib_execdir) and update devel link, if needed
-libgudev-install-move-hook:
-	if test "$(libdir)" != "$(rootlib_execdir)"; then \
-		mkdir -p $(DESTDIR)$(rootlib_execdir) && \
-		so_img_name=$$(readlink $(DESTDIR)$(libdir)/libgudev-1.0.so) && \
-		so_img_rel_target_prefix=$$(echo $(libdir) | sed 's,\(^/\|\)[^/][^/]*,..,g') && \
-		ln -sf $$so_img_rel_target_prefix$(rootlib_execdir)/$$so_img_name $(DESTDIR)$(libdir)/libgudev-1.0.so && \
-		mv $(DESTDIR)$(libdir)/libgudev-1.0.so.* $(DESTDIR)$(rootlib_execdir); \
-	fi
-
-libgudev-uninstall-move-hook:
-	rm -f $(DESTDIR)$(rootlib_execdir)/libgudev-1.0.so*
-
-INSTALL_EXEC_HOOKS += libgudev-install-move-hook
-UNINSTALL_EXEC_HOOKS += libgudev-uninstall-move-hook
-endif
-
-# ------------------------------------------------------------------------------
-if ENABLE_KEYMAP
-keymap_SOURCES = src/keymap/keymap.c
-keymap_CPPFLAGS = $(AM_CPPFLAGS) -I src/keymap
-nodist_keymap_SOURCES = \
-	src/keymap/keys-from-name.h \
-	src/keymap/keys-to-name.h
-BUILT_SOURCES += $(nodist_keymap_SOURCES)
-
-pkglibexec_PROGRAMS += keymap
-dist_doc_DATA = src/keymap/README.keymap.txt
-
-dist_udevrules_DATA += \
-	src/keymap/95-keymap.rules \
-	src/keymap/95-keyboard-force-release.rules
-
-dist_udevhome_SCRIPTS += src/keymap/findkeyboards
-udevhome_SCRIPTS += src/keymap/keyboard-force-release.sh
-
-EXTRA_DIST += \
-	src/keymap/check-keymaps.sh \
-	src/keymap/keyboard-force-release.sh.in
-
-CLEANFILES += \
-	src/keymap/keys.txt \
-	src/keymap/keys-from-name.gperf \
-	src/keymap/keyboard-force-release.sh
-
-udevkeymapdir = $(libexecdir)/udev/keymaps
-dist_udevkeymap_DATA = \
-	src/keymap/keymaps/acer \
-	src/keymap/keymaps/acer-aspire_5720 \
-	src/keymap/keymaps/acer-aspire_8930 \
-	src/keymap/keymaps/acer-aspire_5920g \
-	src/keymap/keymaps/acer-aspire_6920 \
-	src/keymap/keymaps/acer-travelmate_c300 \
-	src/keymap/keymaps/asus \
-	src/keymap/keymaps/compaq-e_evo \
-	src/keymap/keymaps/dell \
-	src/keymap/keymaps/dell-latitude-xt2 \
-	src/keymap/keymaps/everex-xt5000 \
-	src/keymap/keymaps/fujitsu-amilo_li_2732 \
-	src/keymap/keymaps/fujitsu-amilo_pa_2548 \
-	src/keymap/keymaps/fujitsu-amilo_pro_edition_v3505 \
-	src/keymap/keymaps/fujitsu-amilo_pro_v3205 \
-	src/keymap/keymaps/fujitsu-amilo_si_1520 \
-	src/keymap/keymaps/fujitsu-esprimo_mobile_v5 \
-	src/keymap/keymaps/fujitsu-esprimo_mobile_v6 \
-	src/keymap/keymaps/genius-slimstar-320 \
-	src/keymap/keymaps/hewlett-packard \
-	src/keymap/keymaps/hewlett-packard-2510p_2530p \
-	src/keymap/keymaps/hewlett-packard-compaq_elitebook \
-	src/keymap/keymaps/hewlett-packard-pavilion \
-	src/keymap/keymaps/hewlett-packard-presario-2100 \
-	src/keymap/keymaps/hewlett-packard-tablet \
-	src/keymap/keymaps/hewlett-packard-tx2 \
-	src/keymap/keymaps/ibm-thinkpad-usb-keyboard-trackpoint \
-	src/keymap/keymaps/inventec-symphony_6.0_7.0 \
-	src/keymap/keymaps/lenovo-3000 \
-	src/keymap/keymaps/lenovo-ideapad \
-	src/keymap/keymaps/lenovo-thinkpad-usb-keyboard-trackpoint \
-	src/keymap/keymaps/lenovo-thinkpad_x6_tablet \
-	src/keymap/keymaps/lenovo-thinkpad_x200_tablet \
-	src/keymap/keymaps/lg-x110 \
-	src/keymap/keymaps/logitech-wave \
-	src/keymap/keymaps/logitech-wave-cordless \
-	src/keymap/keymaps/logitech-wave-pro-cordless \
-	src/keymap/keymaps/maxdata-pro_7000 \
-	src/keymap/keymaps/medion-fid2060 \
-	src/keymap/keymaps/medionnb-a555 \
-	src/keymap/keymaps/micro-star \
-	src/keymap/keymaps/module-asus-w3j \
-	src/keymap/keymaps/module-ibm \
-	src/keymap/keymaps/module-lenovo \
-	src/keymap/keymaps/module-sony \
-	src/keymap/keymaps/module-sony-old \
-	src/keymap/keymaps/module-sony-vgn \
-	src/keymap/keymaps/olpc-xo \
-	src/keymap/keymaps/onkyo \
-	src/keymap/keymaps/oqo-model2 \
-	src/keymap/keymaps/samsung-other \
-	src/keymap/keymaps/samsung-90x3a \
-	src/keymap/keymaps/samsung-sq1us \
-	src/keymap/keymaps/samsung-sx20s \
-	src/keymap/keymaps/toshiba-satellite_a100 \
-	src/keymap/keymaps/toshiba-satellite_a110 \
-	src/keymap/keymaps/toshiba-satellite_m30x \
-	src/keymap/keymaps/zepto-znote
-
-udevkeymapforcereldir = $(libexecdir)/udev/keymaps/force-release
-dist_udevkeymapforcerel_DATA = \
-	src/keymap/force-release-maps/dell-touchpad \
-	src/keymap/force-release-maps/hp-other \
-	src/keymap/force-release-maps/samsung-other \
-	src/keymap/force-release-maps/samsung-90x3a \
-	src/keymap/force-release-maps/common-volume-keys
-
-src/keymap/keys.txt: $(INCLUDE_PREFIX)/linux/input.h
-	$(AM_V_at)mkdir -p src/keymap
-	$(AM_V_GEN)$(AWK) '/^#define.*KEY_[^ ]+[ \t]+[0-9]/ { if ($$2 != "KEY_MAX") { print $$2 } }' < $< | sed 's/^KEY_COFFEE$$/KEY_SCREENLOCK/' > $@
-
-src/keymap/keys-from-name.gperf: src/keymap/keys.txt
-	$(AM_V_GEN)$(AWK) 'BEGIN{ print "struct key { const char* name; unsigned short id; };"; print "%null-strings"; print "%%";} { print $$1 ", " $$1 }' < $< > $@
-
-src/keymap/keys-from-name.h: src/keymap/keys-from-name.gperf Makefile
-	$(AM_V_GEN)$(GPERF) -L ANSI-C -t --ignore-case -N lookup_key -H hash_key_name -p -C < $< > $@
-
-src/keymap/keys-to-name.h: src/keymap/keys.txt Makefile
-	$(AM_V_GEN)$(AWK) 'BEGIN{ print "const char* const key_names[KEY_CNT] = { "} { print "[" $$1 "] = \"" $$1 "\"," } END{print "};"}' < $< > $@
-
-keymaps-distcheck-hook: src/keymap/keys.txt
-	$(top_srcdir)/src/keymap/check-keymaps.sh $(top_srcdir) $^
-DISTCHECK_HOOKS += keymaps-distcheck-hook
-endif
-
-if ENABLE_MTD_PROBE
-# ------------------------------------------------------------------------------
-mtd_probe_SOURCES =  \
-	src/mtd_probe/mtd_probe.c \
-	src/mtd_probe/mtd_probe.h \
-	src/mtd_probe/probe_smartmedia.c
-mtd_probe_CPPFLAGS = $(AM_CPPFLAGS)
-dist_udevrules_DATA += src/mtd_probe/75-probe_mtd.rules
-pkglibexec_PROGRAMS += mtd_probe
-endif
-
-# ------------------------------------------------------------------------------
-if ENABLE_RULE_GENERATOR
-dist_udevhome_SCRIPTS += \
-	src/rule_generator/write_cd_rules \
-	src/rule_generator/write_net_rules
-
-dist_udevhome_DATA += \
-	src/rule_generator/rule_generator.functions
-
-dist_udevrules_DATA += \
-	src/rule_generator/75-cd-aliases-generator.rules \
-	src/rule_generator/75-persistent-net-generator.rules
-endif
-
-# ------------------------------------------------------------------------------
-if ENABLE_FLOPPY
-create_floppy_devices_SOURCES = src/floppy/create_floppy_devices.c
-create_floppy_devices_LDADD = libudev-private.la
-pkglibexec_PROGRAMS += create_floppy_devices
-dist_udevrules_DATA += src/floppy/60-floppy.rules
-endif
-
-# ------------------------------------------------------------------------------
-clean-local:
-	rm -rf udev-test-install
-
-distclean-local:
-	rm -rf autom4te.cache
-
-EXTRA_DIST += \
-	$(TESTS) \
-	test/rule-syntax-check.py
-
-CLEANFILES += \
-	$(BUILT_SOURCES)
-
-install-exec-hook: $(INSTALL_EXEC_HOOKS)
-
-install-data-hook: $(INSTALL_DATA_HOOKS)
-
-uninstall-hook: $(UNINSTALL_EXEC_HOOKS)
-
-distcheck-hook: $(DISTCHECK_HOOKS)
-
-distclean-local: $(DISTCLEAN_LOCAL_HOOKS)
-
-# ------------------------------------------------------------------------------
-PREVIOUS_VERSION = `expr $(VERSION) - 1`
-changelog:
-	@ head -1 ChangeLog | grep -q "to v$(PREVIOUS_VERSION)"
-	@ mv ChangeLog ChangeLog.tmp
-	@ echo "Summary of changes from v$(PREVIOUS_VERSION) to v$(VERSION)" >> ChangeLog
-	@ echo "============================================" >> ChangeLog
-	@ echo >> ChangeLog
-	@ git log --pretty=short $(PREVIOUS_VERSION)..HEAD | git shortlog  >> ChangeLog
-	@ echo >> ChangeLog
-	@ cat ChangeLog
-	@ cat ChangeLog.tmp >> ChangeLog
-	@ rm ChangeLog.tmp
-
-test-install:
-	rm -rf $(PWD)/udev-test-install/
-	make DESTDIR=$(PWD)/udev-test-install install
-	tree $(PWD)/udev-test-install/
-
-git-release:
-	head -1 ChangeLog | grep -q "to v$(VERSION)"
-	head -1 NEWS | grep -q "udev $(VERSION)"
-	git commit -a -m "release $(VERSION)"
-	git tag -m "udev $(VERSION)" -s $(VERSION)
-	git gc --prune=0
-
-git-sync:
-	git push
-	git push --tags
-
-tar-sync:
-	rm -f udev-$(VERSION).tar.sign
-	xz -d -c udev-$(VERSION).tar.xz | gpg --armor --detach-sign --output udev-$(VERSION).tar.sign
-	kup put udev-$(VERSION).tar.xz  udev-$(VERSION).tar.sign /pub/linux/utils/kernel/hotplug/
-
-doc-sync:
-	for i in src/*.html; do rm -f $$i.sign; gpg --armor --detach-sign --output=$$i.sign $$i; done
-	for i in src/*.html; do echo $$i; kup put $$i $$i.sign /pub/linux/utils/kernel/hotplug/udev/; done
-	for i in src/docs/html/*.{html,css,png}; do rm -f $$i.sign; gpg --armor --detach-sign --output=$$i.sign $$i; done
-	for i in src/docs/html/*.{html,css,png}; do echo $$i; kup put $$i $$i.sign /pub/linux/utils/kernel/hotplug/libudev/; done
-	for i in src/gudev/docs/html/*.{html,css,png}; do rm -f $$i.sign; gpg --armor --detach-sign --output=$$i.sign $$i; done
-	for i in src/gudev/docs/html/*.{html,css,png}; do echo $$i; kup put $$i $$i.sign /pub/linux/utils/kernel/hotplug/gudev/; done
diff --git a/src/udev/NEWS b/src/udev/NEWS
deleted file mode 100644
index f4f6f4e32..000000000
--- a/src/udev/NEWS
+++ /dev/null
@@ -1,1735 +0,0 @@
-udev 182
-========
-Rules files in /etc/udev/rules.s/ with the same name as rules files in
-/run/udev/rules.d/ now always have precedence. The stack of files is now:
-/usr/lib (package), /run (runtime, auto-generated), /etc (admin), while
-the later ones override the earlier ones. In other words: the admin has
-always the last say.
-
-USB auto-suspend is now enabled by default for some built-in USB HID
-devices.
-
-/dev/disk/by-path/ links are no longer created for ATA devices behind
-an 'ATA transport class', the logic to extract predictable numbers does
-not exist in the kernel at this moment.
-
-/dev/disk/by-id/scsi-* compatibility links are no longer created for
-ATA devices, they have their own ata-* prefix.
-
-The s390 rule to set mode == 0666 for /dev/z90crypt is is removed from
-the udev tree and will be part of s390utils (or alternatively could be
-done by the kernel driver itself).
-
-The udev-acl tool is no longer provided, it will be part of a future
-ConsoleKit release. On systemd systems, advanced ConsoleKit and udev-acl
-functionality are provided by systemd.
-
-udev 181
-========
-Require kmod version 5.
-
-Provide /dev/cdrom symlink for /dev/sr0.
-
-udev 180
-========
-Fix for ID_PART_ENTRY_* property names, added by the blkid built-in. The
-fix is needed for udisk2 to operate properly.
-
-Fix for skipped rule execution when the kernel has removed the device
-node in /dev again, before the event was even started. The fix is needed
-to run device-mapper/LVM events properly.
-
-Fix for the man page installation, which was skipped when xsltproc was not
-installed.
-
-udev 179
-========
-Bugfix for $name resolution, which broke at least some keymap handling.
-
-udev 178
-========
-Bugfix for the firmware loading behavior with kernel modules which
-try to load firmware in the module_init() path. The blocked event
-runs into a timout now, which should allow the firmware to be loaded.
-
-Bugfix for a wrong DEVNAME= export, which breaks at least the udev-acl
-tool.
-
-Bugfix for missing ID_ properties for GPT partitions.
-
-The RUN+="socket:.." option is deprecated and should not be used. A warning
-during rules parsing is printed now. Services which listen to udev events,
-need to subscribe to the netlink messages with libudev and not let udev block
-in the rules execution until the message is delivered.
-
-udev 177
-========
-Bugfix for rule_generator instalation.
-
-udev 176
-========
-The 'devtmpfs' filesystem is required now, udev will not create or delete
-device nodes anymore, it only adjusts permissions and ownership of device
-nodes and maintains additional symlinks.
-
-A writable /run directory (ususally tmpfs) is required now for a fully
-functional udev, there is no longer a fallback to /dev/.udev.
-
-The default 'configure' install locations have changed. Packages for systems
-with the historic / vs. /usr split need to be adapted, otherwise udev will
-be installed in /usr and not work properly. Example configuration options
-to install things the traditional way are in INSTALL.
-
-The default install location of the 'udevadm' tool moved from 'sbin'
-to /usr/bin. Some tools expect udevadm in 'sbin', a symlink to udevadm
-needs to be manually created if needed, or --bindir=/sbin be specified.
-
-The expected value of '--libexecdir=' has changed and must no longer contain
-the 'udev' directory.
-
-Kernel modules are now loaded directly by linking udev to 'libkmod'. The
-'modprobe' tool is no longer executed by udev.
-
-The 'blkid' tool is no longer executed from udev rules. Udev links
-directly to libblkid now.
-
-Firmware is loaded natively by udev now, the external 'firmware' binary
-is no longer used.
-
-All built-in tools can be listed and tested with 'udevadm test-builtin'.
-
-The 'udevadm control --reload-rules' option has been renamed to '--reload'.
-It now also reloads the kernel module configuration.
-
-The systemd socket files use PassCredentials=yes, which is available in
-systemd version 38.
-
-The udev build system only creates a .xz tarball now.
-
-All tabs in the source code used for indentation are replaced by spaces now. :)
-
-udev 175
-========
-Bugfixes.
-
-udev 174
-========
-Bugfixes.
-
-The udev daemon moved to /lib/udev/udevd. Non-systemd init systems
-and non-dracut initramfs image generators need to change the init
-scripts. Alternatively the udev build needs to move udevd back to
-/sbin or create a symlink in /sbin, which is not done by default.
-
-The path_id, usb_id, input_id tools are built-in commands now and
-the stand-alone tools do not exist anymore. Static lists of file in
-initramfs generators need to be updated. For testing, the commands
-can still be executed standalone with 'udevadm test-builtin <cmd>'.
-
-The fusectl filesystem is no longer mounted directly from udev.
-Systemd systems will take care of mounting fusectl and configfs
-now. Non-systemd systems need to ship their own rule if they
-need these filesystems auto-mounted.
-
-The long deprecated keys: SYSFS=, ID=, BUS= have been removed.
-
-The support for 'udevadm trigger --type=failed, and the
-RUN{fail_event_on_error} attribute was removed.
-
-The udev control socket is now created in /run/udev/control
-and no longer as an abstract namespace one.
-
-The rules to create persistent network interface and cdrom link
-rules automatically in /etc/udev/rules.d/ have been disabled by
-default. Explicit configuration will be required for these use
-cases, udev will no longer try to write any persistent system
-configuration from a device hotplug path.
-
-udev 173
-========
-Bugfixes.
-
-The udev-acl extra is no longer enabled by default now. To enable it,
---enable-udev_acl needs to be given at ./configure time. On systemd
-systems, the udev-acl rules prevent it from running as the functionality
-has moved to systemd.
-
-udev 172
-========
-Bugfixes.
-
-Udev now enables kernel media-presence polling if available. Part
-of udisks optical drive tray-handling moved to cdrom_id: The tray
-is locked as soon as a media is detected to enable the receiving
-of media-eject-request events. Media-eject-request events will
-eject the media.
-
-Libudev enumerate is now able to enumerate a subtree of a given
-device.
-
-The mobile-action-modeswitch modeswitch tool was deleted. The
-functionality is provided by usb_modeswitch now.
-
-udev 171
-========
-Bugfixes.
-
-The systemd service files require systemd version 28. The systemd
-socket activation make it possible now to start 'udevd' and 'udevadm
-trigger' in parallel.
-
-udev 170
-========
-Fix bug in control message handling, which can lead to a failing
-udevadm control --exit. Thanks to Jürg Billeter for help tracking
-it down.
-
-udev 169
-========
-Bugfixes.
-
-We require at least Linux kernel 2.6.32 now. Some platforms might
-require a later kernel that supports accept4() and similar, or
-need to backport the trivial syscall wiring to the older kernels.
-
-The hid2hci tool moved to the bluez package and was removed.
-
-Many of the extras can be --enable/--disabled at ./configure
-time. The --disable-extras option was removed. Some extras have
-been disabled by default. The current options and their defaults
-can be checked with './configure --help'.
-
-udev 168
-========
-Bugfixes.
-
-Udev logs a warning now if /run is not writable at udevd
-startup. It will still fall back to /dev/.udev, but this is
-now considered a bug.
-
-The running udev daemon can now cleanly shut down with:
-  udevadm control --exit
-
-Udev in initramfs should clean the state of the udev database
-with: udevadm info --cleanup-db which will remove all state left
-behind from events/rules in initramfs. If initramfs uses
---cleanup-db and device-mapper/LVM, the rules in initramfs need
-to add OPTIONS+="db_persist" for all dm devices. This will
-prevent removal of the udev database for these devices.
-
-Spawned programs by PROGRAM/IMPORT/RUN now have a hard timeout of
-120 seconds per process. If that timeout is reached the spawned
-process will be killed. The event timeout can be overwritten with
-udev rules.
-
-If systemd is used, udev gets now activated by netlink data.
-Systemd will bind the netlink socket which will buffer all data.
-If needed, such setup allows a seemless update of the udev daemon,
-where no event can be lost during a udevd update/restart.
-Packages need to make sure to: systemctl stop udev.socket udev.service
-or 'mask' udev.service during the upgrade to prevent any unwanted
-auto-spawning of udevd.
-This version of udev conflicts with systemd version below 25. The
-unchanged service files will not wirk correctly.
-
-udev 167
-========
-Bugfixes.
-
-The udev runtime data moved from /dev/.udev/ to /run/udev/. The
-/run mountpoint is supposed to be a tmpfs mounted during early boot,
-available and writable to for all tools at any time during bootup,
-it replaces /var/run/, which should become a symlink some day.
-
-If /run does not exist, or is not writable, udev will fall back using
-/dev/.udev/.
-
-On systemd systems with initramfs and LVM used, packagers must
-make sure, that the systemd and initramfs versions match. The initramfs
-needs to create the /run mountpoint for udev to store the data, and
-mount this tmpfs to /run in the rootfs, so the that the udev database
-is preserved for the udev version started in the rootfs.
-
-The command 'udevadm info --convert-db' is gone. The udev daemon
-itself, at startup, converts any old database version if necessary.
-
-The systemd services files have been reorganized. The udev control
-socket is bound by systemd and passed to the started udev daemon.
-The udev-settle.service is no longer active by default. Services which
-can not handle hotplug setups properly need to actively pull it in, to
-act like a barrier. Alternatively the settle service can be unconditionally
-'systemctl'enabled, and act like a barrier for basic.target.
-
-The fstab_import callout is no longer built or installed. Udev
-should not be used to mount, does not watch changes to fstab, and
-should not mirror fstab values in the udev database.
-
-udev 166
-========
-Bugfixes.
-
-New and updated keymaps.
-
-udev 165
-========
-Bugfixes.
-
-The udev database has changed, After installation of a new udev
-version, 'udevadm info --convert-db' should be called, to let the new
-udev/libudev version read the already stored data.
-
-udevadm now supports quoting of property values, and prefixing of
-key names:
-  $ udevadm info --export --export-prefix=MY_ --query=property -n sda
-  MY_MAJOR='259'
-  MY_MINOR='0'
-  MY_DEVNAME='/dev/sda'
-  MY_DEVTYPE='disk'
-  ...
-
-libudev now supports:
-  udev_device_get_is_initialized()
-  udev_enumerate_add_match_is_initialized()
-to be able to skip devices the kernel has created , but udev has
-not already handled.
-
-libudev now supports:
-  udev_device_get_usec_since_initialized()
-to retrieve the "age" of a udev device record.
-
-GUdev supports a more generic GUdevEnumerator class, udev TAG
-handling, device initialization and timestamp now.
-
-The counterpart of /sys/dev/{char,block}/$major:$minor,
-/dev/{char,block}/$major:$minor symlinks are now unconditionally
-created, even when no rule files exist.
-
-New and updated keymaps.
-
-udev 164
-========
-Bugfixes.
-
-GUdev moved from /usr to /.
-
-udev 163
-========
-Bugfixes.
-
-udev 162
-========
-Bugfixes.
-
-Persistent network naming rules are disabled inside of Qemu/KVM now.
-
-New and updated keymaps.
-
-Udev gets unconditionally enabled on systemd installations now. There
-is no longer the need to to run 'systemctl enable udev.service'.
-
-udev 161
-========
-Bugfixes.
-
-udev 160
-========
-Bugfixes.
-
-udev 159
-========
-Bugfixes.
-
-New and fixed keymaps.
-
-Install systemd service files if applicable.
-
-udev 158
-========
-Bugfixes.
-
-All distribution specific rules are removed from the udev source tree,
-most of them are no longer needed. The Gentoo rules which allow to support
-older kernel versions, which are not covered by the default rules anymore
-has moved to rules/misc/30-kernel-compat.rules.
-
-udev 157
-========
-Bugfixes.
-
-The option --debug-trace and the environemnt variable UDEVD_MAX_CHILDS=
-was removed from udevd.
-
-Udevd now checks the kernel commandline for the following variables:
-  udev.log-priority=<syslog priority>
-  udev.children-max=<maximum number of workers>
-  udev.exec-delay=<seconds to delay the execution of RUN=>
-to help debuging coldplug setups where the loading of a kernel
-module crashes the system.
-
-The subdirectory in the source tree rules/packages has been renamed to
-rules/arch, anc contains only architecture specific rules now.
-
-udev 156
-========
-Bugfixes.
-
-udev 155
-========
-Bugfixes.
-
-Now the udev daemon itself, does on startup:
-  - copy the content of /lib/udev/devices to /dev
-  - create the standard symlinks like /dev/std{in,out,err},
-    /dev/core, /dev/fd, ...
-  - use static node information provided by kernel modules
-    and creates these nodes to allow module on-demand loading
-  - possibly apply permissions to all ststic nodes from udev
-    rules which are annotated to match a static node
-
-The default mode for a device node is 0600 now to match the kernel
-created devtmpfs defaults. If GROUP= is specified and no MODE= is
-given the default will be 0660.
-
-udev 154
-========
-Bugfixes.
-
-Udev now gradually starts to pass control over the primary device nodes
-and their names to the kernel, and will in the end only manage the
-permissions of the node, and possibly create additional symlinks.
-As a first step NAME="" will be ignored, and NAME= setings with names
-other than the kernel provided name will result in a logged warning.
-Kernels that don't provide device names, or devtmpfs is not used, will
-still work as they did before, but it is strongly recommended to use
-only the same names for the primary device node as the recent kernel
-provides for all devices.
-
-udev 153
-========
-Fix broken firmware loader search path.
-
-udev 152
-========
-Bugfixes.
-
-"udevadm trigger" defaults to "change" events now instead of "add"
-events. The "udev boot script" might need to add "--action=add" to
-the trigger command if not already there, in case the initial coldplug
-events are expected as "add" events.
-
-The option "all_partitons" was removed from udev. This should not be
-needed for usual hardware. Udev can not safely make assumptions
-about non-existing partition major/minor numbers, and therefore no
-longer provide this unreliable and unsafe option.
-
-The option "ignore_remove" was removed from udev. With devtmpfs
-udev passed control over device nodes to the kernel. This option
-should not be needed, or can not work as advertised. Neither
-udev nor the kernel will remove device nodes which are copied from
-the /lib/udev/devices/ directory.
-
-All "add|change" matches are replaced by "!remove" in the rules and
-in the udev logic. All types of events will update possible symlinks
-and permissions, only "remove" is handled special now.
-
-The modem modeswitch extra was removed and the external usb_modeswitch
-program should be used instead.
-
-New and fixed keymaps.
-
-udev 151
-========
-Bugfixes.
-
-udev 150
-========
-Bugfixes.
-
-Kernels with SYSFS_DEPRECATED=y are not supported since a while. Many users
-depend on the current sysfs layout and the information not available in the
-deprecated layout. All remaining support for the deprecated sysfs layout is
-removed now.
-
-udev 149
-========
-Fix for a possible endless loop in the new input_id program.
-
-udev 148
-========
-Bugfixes.
-
-The option "ignore_device" does no longer exist. There is no way to
-ignore an event, as libudev events can not be suppressed by rules.
-It only prevented RUN keys from being executed, which results in an
-inconsistent behavior in current setups.
-
-BUS=, SYSFS{}=, ID= are long deprecated and should be SUBSYSTEM(S)=,
-ATTR(S){}=, KERNEL(S)=. It will cause a warning once for every rule
-file from now on.
-
-The support for the deprecated IDE devices has been removed from the
-default set of rules. Distros who still care about non-libata drivers
-need to add the rules to the compat rules file.
-
-The ID_CLASS property on input devices has been replaced by the more accurate
-set of flags ID_INPUT_{KEYBOARD,KEY,MOUSE,TOUCHPAD,TABLET,JOYSTICK}. These are
-determined by the new "input_id" prober now. Some devices, such as touchpads,
-can have several classes. So if you previously had custom udev rules which e. g.
-checked for ENV{ID_CLASS}=="kbd", you need to replace this with
-ENV{ID_INPUT_KEYBOARD}=="?*".
-
-udev 147
-========
-Bugfixes.
-
-To support DEVPATH strings larger than the maximum file name length, the
-private udev database format has changed. If some software still reads the
-private files in /dev/.udev/, which it shouldn't, now it's time to fix it.
-Please do not port anything to the new format again, everything in /dev/.udev
-is and always was private to udev, and may and will change any time without
-prior notice.
-
-Multiple devices claiming the same names in /dev are limited to symlinks
-only now. Mixing identical symlink names and node names is not supported.
-This reduces the amount of data in the database significantly.
-
-NAME="%k" causes a warning now. It's is and always was completely superfluous.
-It will break kernel supplied DEVNAMEs and therefore it needs to be removed
-from all rules.
-
-Most NAME= instructions got removed. Kernel 2.6.31 supplies the needed names
-if they are not the default. To support older kernels, the NAME= rules need to
-be added to the compat rules file.
-
-Symlinks to udevadm with the old command names are no longer resolved to
-the udevadm commands.
-
-The udev-acl tool got adopted to changes in ConsoleKit. Version 0.4.1 is
-required now.
-
-The option "last_rule" does no longer exist. Its use breaks too many
-things which expect to be run from independent later rules, and is an idication
-that something needs to be fixed properly instead.
-
-The gudev API is no longer marked as experimental,
-G_UDEV_API_IS_SUBJECT_TO_CHANGE is no longer needed. The gudev introspection
-is enabled by default now. Various projects already depend on introspection
-information to bind dynamic languages to the gudev interfaces.
-
-udev 146
-========
-Bugfixes.
-
-The udevadm trigger "--retry-failed" option, which is replaced since quite
-a while by "--type=failed" is removed.
-
-The failed tracking was not working at all for a few releases. The RUN
-option "ignore_error" is replaced by a "fail_event_on_error" option, and the
-default is not to track any failing RUN executions.
-
-New keymaps, new modem, hid2hci updated.
-
-udev 145
-========
-Fix possible crash in udevd when worker processes are busy, rules are
-changed at the same time, and workers get killed to reload the rules.
-
-udev 144
-========
-Bugfixes.
-
-Properties set with ENV{.FOO}="bar" are marked private by starting the
-name with a '.'. They will not be stored in the database, and not be
-exported with the event.
-
-Firmware files are looked up in:
-  /lib/firmware/updates/$(uname -r)
-  /lib/firmware/updates
-  /lib/firmware/$(uname -r)
-  /lib/firmware"
-now.
-
-ATA devices switched the property from ID_BUS=scsi to ID_BUS=ata.
-ata_id, instead of scsi_id, is the default tool now for ATA devices.
-
-udev 143
-========
-Bugfixes.
-
-The configure options have changed because another library needs to be
-installed in a different location. Instead of exec_prefix and udev_prefix,
-libdir, rootlibdir and libexecdir are used. The Details are explained in
-the README file.
-
-Event processes now get re-used after they handled an event. This reduces
-the number of forks and the pressure on the CPU significantly, because
-cloned event processes no longer cause page faults in the main daemon.
-After the events have settled, a few worker processes stay around for
-future events, all others get cleaned up.
-
-To be able to use signalfd(), udev depends on kernel version 2.6.25 now.
-Also inotify support is mandatory now to run udev.
-
-The format of the queue exported by the udev damon has changed. There is
-no longer a /dev/.udev/queue/ directory. The current event queue can be
-accessed with udevadm settle and libudedv.
-
-Libudev does not have the unstable API header anymore. From now on,
-incompatible changes will be handled by bumping the library major version.
-
-To build udev from the git tree gtk-doc is needed now. The tarballs will
-build without it and contain the pre-built documentation. An online copy
-is available here:
-  http://www.kernel.org/pub/linux/utils/kernel/hotplug/libudev/
-
-The tools from the udev-extras repository have been merged into the main
-udev repository. Some of the extras have larger external dependencies, and
-they can be disabled with the configure switch --disable-extras.
-
-udev 142
-========
-Bugfixes.
-
-The program vol_id and the library libvolume_id are removed from the
-repository. Libvolume_id is merged with libblkid from the util-linux-ng
-package. Persistent disk links for label and uuid depend on the
-util-linux-ng version (2.15) of blkid now. Older versions of blkid
-can not be used with udev.
-
-Libudev allows to subscribe to udev events. To prevent unwanted messages
-to be delivered, and waking up the subscribing process, a filter can be
-installed, to drop messages inside a kernel socket filter. The filters
-match on the <subsytem>:<devtype> properties of the device.
-    This is part of the ongoing effort to replace HAL, and switch current
-users over to directly use libudev.
-    Libudev is still marked as experimental, and its interface might
-eventually change if needed, but no major changes of the currently exported
-interface are expected anymore, and a first stable release should happen
-soon.
-
-A too old kernel (2.6.21) or a kernel with CONFIG_SYSFS_DEPRECATED
-is not supported since while and udevd will log an error message at
-startup. It should still be able to boot-up, but advanced rules and system
-services which depend on the information not available in the old sysfs
-format will fail to work correctly.
-
-DVB device naming is supplied by the kernel now. In case older kernels
-need to be supported, the old shell script should be added to a compat
-rules file.
-
-udev 141
-========
-Bugfixes.
-
-The processed udev events get send back to the netlink socket. Libudev
-provides access to these events. This is work-in-progress, to replace
-the DeviceKit daemon functionality directly with libudev. There are
-upcoming kernel changes to allow non-root users to subcribe to these
-events.
-
-udev 140
-========
-Bugfixes.
-
-"udevadm settle" now optionally accepts a range of events to wait for,
-instead of waiting for "all" events.
-
-udev 139
-========
-Bugfixes.
-
-The installed watch for block device metadata changes is now removed
-during event hadling, because some (broken) tools may be called from udev
-rules and (wrongly) open the device with write access. After the finished
-event handling the watch is restored.
-
-udev 138
-========
-Bugfixes.
-
-Device nodes can be watched for changes with inotify with OPTIONS="watch".
-If closed after being opened for writing, a "change" uevent will occur.
-/dev/disk/by-{label,uuid}/* symlinks will be automatically updated.
-
-udev 137
-========
-Bugfixes.
-
-The udevadm test command has no longer a --force option, nodes and symlinks
-are always updated with a test run now.
-
-The udevd daemon can be started with --resolve-names=never to avoid all user
-and group lookups (e.g. in cut-down systems) or --resolve-names=late to
-lookup user and groups every time events are handled.
-
-udev 136
-========
-Bugfixes.
-
-We are currently merging the Ubuntu rules in the udev default rules,
-and get one step closer to provide a common Linux /dev setup, regarding
-device names, symlinks, and default device permissions. On udev startup,
-we now expect the following groups to be resolvable to their ids with
-glibc's getgrnam():
-  disk, cdrom, floppy, tape, audio, video, lp, tty, dialout, kmem.
-LDAP setups need to make sure, that these groups are always resolvable at
-bootup, with only the rootfs mounted, and without network access available.
-
-Some systems may need to add some new, currently not used groups, or need
-to add some users to new groups, but the cost of this change is minimal,
-compared to the pain the current, rather random, differences between the
-various distributions cause for upstream projects and third-party vendors.
-
-In general, "normal" users who log into a machine should never be a member
-of any such group, but the device-access should be managed by dynamic ACLs,
-which get added and removed for the specific users on login/logout and
-session activity/inactivity. These groups are only provided for custom setups,
-and mainly system services, to allow proper privilege separation.
-A video-streaming daemon uid would be a member of "audio" and "video", to get
-access to the sound and video devices, but no "normal" user should ever belong
-to the "audio" group, because he could listen to the built-in microphone with
-any ssh-session established from the other side of the world.
-
-/dev/serial/by-{id,path}/ now contains links for ttyUSB devices,
-which do not depend on the kernel device name. As usual, unique
-devices - only a single one per product connected, or a real
-USB serial number in the device - are always found with the same
-name in the by-id/ directory.
-Completely identical devices may overwrite their names in by-id/
-and can only be found reliably in the by-path/ directory. Devices
-specified by by-path/ must not change their connection, like the
-USB port number they are plugged in, to keep their name.
-
-To support some advanced features, Linux 2.6.22 is the oldest supported
-version now. The kernel config with enabled SYSFS_DEPRECATED is no longer
-supported. Older kernels should still work, and devices nodes should be
-reliably created, but some rules and libudev will not work correctly because
-the old kernels do not provide the expected information or interfaces.
-
-udev 135
-========
-Bugfixes.
-
-Fix for a possible segfault while swapping network interface names in udev
-versions 131-134.
-
-udev 134
-========
-Bugfixes.
-
-The group "video" is part of the default rules now.
-
-udev 133
-========
-Bugfix for kernels using SYSFS_DEPRECATED* option and finding parent
-block devices in some cases. No common distro uses this option anymore,
-and we do not get enough testing for this and recent udev versions. If
-this option is not needed to run some old distro with a new kernel,
-it should be disabled in the kernel config.
-
-Bugfix for the $links substitution variable, which may crash if no links
-are created. This should not happen in usual setups because we always
-create /dev/{block,char}/ links.
-
-The strings of the parsed rules, which are kept in memory, no longer
-contain duplicate entries, or duplicate tails of strings. This, and the
-new rules parsing/matching code reduces the total in-memory size of
-a huge distro rule sets to 0.08 MB, compared to the 1.2MB of udev
-version 130.
-
-The export of DEVTYPE=disk/partition got removed from the default
-rules. This value is available from the kernel. The pnp shell script
-modprobe hack is removed from the default rules. ACPI devices have _proper_
-modalias support and take care of the same functionality.
-Installations which support old kernels, but install current default
-udev rules may want to add that to the compat rules file.
-
-Libvolume_id now always probes for all known filesystems, and does not
-stop at the first match. Some filesystems are marked as "exclusive probe",
-and if any other filesytem type matches at the same time, libvolume_id
-will, by default, not return any probing result. This is intended to prevent
-mis-detection with conflicting left-over signatures found from earlier
-file system formats. That way, we no longer depend on the probe-order
-in case of multiple competing signatures. In some setups the kernel allows
-to mount a volume with just the old filesystem signature still in place.
-This may damage the new filesystem and cause data-loss, just by mounting
-it. Because volume_id can not decide which one the correct signature is,
-the wrong signatures need to be removed manually from the volume, or the
-volume needs to be reformatted, to enable filesystem detection and possible
-auto-mounting.
-
-udev 132
-========
-Fix segfault if compiled without optimization and dbg() does not get
-compiled out and uses variables which are not available.
-
-udev 131
-========
-Bugfixes. (And maybe new bugs. :))
-
-The rule matching engine got converted from a rule list to a token
-array which reduced the in-memory rules representation of a full
-featured distros with thousends of udev rules from 1.2MB to 0.12 MB.
-Limits like 5 ENV and ATTR matches, and one single instance for most
-other keys per rule are gone.
-
-The NAME assignment is no longer special cased. If later rules assign
-a NAME value again, the former value will be overwritten. As usual
-for most other keys, the NAME value can be protected by doing a final
-assignment with NAME:="<value>".
-
-All udev code now uses libudev, which is also exported. The library
-is still under development, marked as experimental, and its interface
-may change as long as the DeviceKit integration is not finished.
-
-Many thanks to Alan Jenkins for his continuous help, and finding and
-optimizing some of the computing expensive parts.
-
-udev 130
-========
-Bugfixes.
-
-Kernel devices and device nodes are connected now by reverse indizes in
-/sys and /dev. A device number retrieved by a stat() or similar, the
-kernel device directory can be found by looking up:
-  /sys/dev/{block,char}/<maj>:<min>
-and the device node of the same device by looking up:
-  /dev/{block,char}/<maj>:<min>
-
-udev 129
-========
-Fix recently introduced bug, which caused a compilation without large
-file support, where vol_id does not recognize raid signatures at the end
-of a volume.
-
-Firewire disks now create both, by-id/scsi-* and by-id/ieee-* links.
-Seems some kernel versions prevent the creation of the ieee-* links,
-so people used the scsi-* link which disappeared now.
-
-More libudev work. Almost all udevadm functionality comes from libudev
-now.
-
-udevadm trigger has a new option --type, which allows to trigger events
-for "devices", for "subsystems", or "failed" devices. The old option
---retry-failed" still works, but is no longer mentioned in the man page.
-
-udev 128
-========
-Bugfixes.
-
-The udevadm info --device-id-of-file= output has changed to use
-the obvious format. Possible current users should use the --export
-option which is not affected.
-
-The old udev commands symlinks to udevadm are not installed, if
-these symlinks are used, a warning is printed.
-
-udev 127
-========
-Bugfixes.
-
-Optical drive's media is no longer probed for raid signatures,
-reading the end of the device causes some devices to malfunction.
-Also the offset of the last session found is used now to probe
-for the filesystem.
-
-The volume_id library got a major version number update to 1,
-some deprecated functions are removed.
-
-A shared library "libudev" gets installed now to provide access
-to udev device information. DeviceKit, the successor of HAL, will
-need this library to access the udev database and search sysfs for
-devices.
-The library is currently in an experimental state, also the API is
-expected to change, as long as the DeviceKit integration is not
-finished.
-
-udev 126
-========
-We use ./configure now. See INSTALL for details. Current
-options are:
-    --prefix=
-        "/usr" - prefix for man pages, include files
-    --exec-prefix=
-        "" - the root filesystem, prefix for libs and binaries
-    --sysconfdir=
-        "/etc"
-    --with-libdir-name=
-        "lib" - directory name for libraries, not a path name
-        multilib 64bit systems may use "lib64" instead of "lib"
-    --enable-debug
-        compile-in verbose debug messages
-    --disable-logging
-        disable all logging and compile-out all log strings
-    --with-selinux
-        link against SELInux libraries, to set the expected context
-        for created files
-
-In the default rules, the group "disk" gets permissions 0660 instead
-of 0640. One small step closer to unify distro rules. Some day, all
-distros hopefully end up with the same set of rules.
-
-No symlinks to udevadm are installed anymore, if they are still needed,
-they should be provided by the package.
-
-udev 125
-========
-Bugfixes.
-
-Default udev rules, which are not supposed to be edited by the user, should
-be placed in /lib/udev/rules.d/ now, to make it clear that they are private to
-the udev package and will be replaced with an update. Udev will pick up rule
-files from:
-  /lib/udev/rules.d/  - default installed rules
-  /etc/udev/rules.d/  - user rules + on-the-fly generated rules
-  /dev/.udev/rules.d/ - temporary non-persistent rules created after bootup
-It does not matter in which directory a rule file lives, all files are sorted
-in lexical order.
-
-To help creating /dev/root, we have now:
-  $ udevadm info --export --export-prefix="ROOT_" --device-id-of-file=/
-  ROOT_MAJOR=8
-  ROOT_MINOR=5
-In case the current --device-id-of-file is already used, please switch to
-the --export format version, it saves the output parsing and the old
-format will be changed to use ':' as a separator, like the format in the
-sysfs 'dev' file.
-
-udev 124
-========
-Fix cdrom_id to properly recognize blank media.
-
-udev 123
-========
-Bugfixes.
-
-Tape drive id-data is queried from /dev/bsg/* instead of the tape
-nodes. This avoids rewinding tapes on open().
-
-udev 122
-========
-Bugfixes.
-
-The symlinks udevcontrol and udevtrigger are no longer installed by
-the Makefile.
-
-The scsi_id program does not depend on sysfs anymore. It can speak
-SGv4 now, so /dev/bsg/* device nodes can be used, to query SCSI device
-data, which should solve some old problems with tape devices, where
-we better do not open all tape device nodes to identify the device.
-
-udev 121
-========
-Many bugfixes.
-
-The cdrom_id program is replaced by an advanced version, which can
-detect most common device types, and also properties of the inserted
-media. This is part of moving some basic functionality from HAL into
-udev (and the kernel).
-
-udev 120
-========
-Bugfixes.
-
-The last WAIT_FOR_SYSFS rule is removed from the default rules.
-
-The symlinks to udevadm for the debugging tools: udevmonitor and
-udevtest are no longer created.
-
-The symlinks to the udevadm man page for the old tool names are
-no longer created.
-
-Abstract namespace sockets paths in RUN+="socket:@<path>" rules,
-should be prefixed with '@' to indicate that the path is not a
-real file.
-
-udev 119
-========
-Bugfixes.
-
-udev 118
-========
-Bugfixes.
-
-Udevstart is removed from the tree, it did not get installed for
-a long time now, and is long replaced by trigger and settle.
-
-udev 117
-========
-Bugfixes.
-
-All udev tools are merged into a single binary called udevadm.
-The old names of the tools are built-in commands in udevadm now.
-Symlinks to udevadm, with the names of the old tools, provide
-the same functionality as the standalone tools. There is also
-only a single udevadm.8 man page left for all tools.
-
-Tools like mkinitramfs should be checked, if they need to include
-udevadm in the list of files.
-
-udev 116
-========
-Bugfixes.
-
-udev 115
-========
-Bugfixes.
-
-The etc/udev/rules.d/ directory now contains a default set of basic
-udev rules. This initial version is the result of a rules file merge
-of Fedora and openSUSE. For these both distros only a few specific
-rules are left in their own file, named after the distro. Rules which
-are optionally installed, because they are only valid for a specific
-architecture, or rules for subsystems which are not always used are
-in etc/udev/packages/.
-
-udev 114
-========
-Bugfixes.
-
-Dynamic rules can be created in /dev/.udev/rules.d/ to trigger
-actions by dynamically created rules.
-
-SYMLINK=="<value>" matches agains the entries in the list of
-currently defined symlinks. The links are not created in the
-filesystem at that point in time, but the values can be matched.
-
-RUN{ignore_error}+="<program>" will ignore any exit code from the
-program and not record as a failed event.
-
-udev 113
-========
-Bugfixes.
-
-Final merge of patches/features from the Ubuntu package.
-
-udev 112
-========
-Bugfixes.
-
-Control characters in filesystem label strings are no longer silenty
-removed, but hex-encoded, to be able to uniquely identify the device
-by its symlink in /dev/disk/by-label/.
-If libvolume_id is used by mount(8), LABEL= will work as expected,
-if slashes or other characters are used in the label string.
-
-To test the existence of a file, TEST=="<file>" and TEST!="<file>"
-can be specified now. The TEST key accepts an optional mode mask
-TEST{0100}=="<is executable file>".
-
-Scsi_id now supports a mode without expecting scsi-specific sysfs
-entries to allow the extraction of cciss-device persistent properties.
-
-udev 111
-========
-Bugfixes.
-
-In the future, we may see uuid's which are just simple character
-strings (see the DDF Raid Specification). For that reason vol_id now
-exports ID_FS_UUID_SAFE, just like ID_FS_LABEL_SAFE. For things like
-the creation of symlinks, the *_SAFE values ensure, that no control
-or whitespace characters are used in the filename.
-
-Possible users of libvolume_id, please use the volume_id_get_* functions.
-The public struct will go away in a future release of the library.
-
-udev 110
-========
-Bugfixes.
-
-Removal of useless extras/eventrecorder.sh.
-
-udev 109
-========
-Bugfixes.
-
-udev 108
-========
-Bugfixes.
-
-The directory multiplexer for dev.d/ and hotplug.d are finally removed
-from the udev package.
-
-udev 107
-========
-Bugfixes.
-
-Symlinks can have priorities now, the priority is assigned to the device
-and specified with OPTIONS="link_priority=100". Devices with higher
-priorities overwrite the symlinks of devices with lower priorities.
-If the device that currently owns the link, goes away, the symlink
-will be removed, and recreated, pointing to the next device with the
-highest actual priority. This should make /dev/disk/by-{label,uuid,id}
-more reliable, if multiple devices contain the same metadata and overwrite
-these symlinks.
-
-The dasd_id program is removed from the udev tree, and dasdinfo, with the
-needed rules, are part of the s390-tools now.
-
-Please add KERNEL=="[0-9]*:[0-9]*" to the scsi wait-for-sysfs rule,
-we may get the scsi sysfs mess fixed some day, and this will only catch
-the devices we are looking for.
-
-USB serial numbers for storage devices have the target:lun now appended,
-to make it possibble to distinguish broken multi-lun devices with all
-the same SCSI identifiers.
-
-Note: The extra "run_directory" which searches and executes stuff in
-/etc/hotplug.d/ and /etc/dev.d/ is long deprecated, and will be removed
-with the next release. Make sure, that you don't use it anymore, or
-provides your own implementation of that inefficient stuff.
-We are tired of reports about a "slow udev", because these directories
-contain stuff, that runs with _every_ event, instead of using rules,
-that run programs only for the matching events.
-
-udev 106
-========
-Bugfixes.
-
-udev 105
-========
-Bugfixes.
-
-DRIVER== will match only for devices that actually have a real
-driver. DRIVERS== must be used, if parent devices should be
-included in the match.
-
-Libvolume_id's "linux_raid" detection needed another fix.
-
-udev 104
-========
-Bugfixes.
-
-udev 103
-========
-Add additional check to volume_id detection of via_raid, cause
-some company decided to put a matching pattern all over the empty
-storage area of their music players.
-
-udev 102
-========
-Fix path_id for SAS devices.
-
-udev 101
-========
-The udev daemon can be started with --debug-trace now, which will
-execute all events serialized to get a chance to catch a possible
-action that crashes the box.
-
-A warning is logged, if PHYSDEV* keys, the "device" link, or a parent
-device attribute like $attr{../file} is used, only WAIT_FOR_SYSFS rules
-are excluded from the warning. Referencing parent attributes directly
-may break when something in the kernel driver model changes. Udev will
-just find the attribute by walking up the parent chain.
-
-Udevtrigger now sorts the list of devices depending on the device
-dependency, so a "usb" device is triggered after the parent "pci"
-device.
-
-udev 100
-========
-Revert persistent-storage ata-serial '_' '-' replacement.
-
-udev 099
-========
-Bugfixes.
-
-Udevtrigger can now filter the list of devices to be triggered. Matches
-for subsystems or sysfs attributes can be specified.
-
-The entries in /dev/.udev/queue and /dev/.udev/failed have changed to
-zero-sized files to avoid pointing to /sys and confuse broken tools which
-scan the /dev directory. To retry failed events, udevtrigger --retry-failed
-should be used now.
-
-The rules and scripts to create udev rules for persistent network
-devices and optical drives are in the extras/rules_generator directory
-now. If you use something similar, please consider replacing your own
-version with this, to share the support effort. The rule_generator
-installs its own rules into /etc/udev/rules.d.
-
-The cdrom_id tool installs its own rule now in /etc/udev/rules.d, cause
-the rule_generator depends on cdrom_id to be called in an earlier rule.
-
-udev 098
-========
-Bugfixes.
-
-Renaming of some key names (the old names still work):
-BUS -> SUBSYSTEMS, ID -> KERNELS, SYSFS -> ATTRS, DRIVER -> DRIVERS.
-(The behavior of the key DRIVER will change soon in one of the next
-releases, to match only the event device, please switch to DRIVERS
-instead. If DRIVER is used, it will behave like DRIVERS, but an error
-is logged.
-With the new key names, we have a more consistent and simpler scheme.
-We can match the properties of the event device only, with: KERNEL,
-SUBSYSTEM, ATTR, DRIVER. Or include all the parent devices in the match,
-with: KERNELS, SUBSYSTEMS, ATTRS, DRIVERS. ID, BUS, SYSFS, DRIVER are no
-longer mentioned in the man page and should be switched in the rule
-files.
-
-ATTR{file}="value" can be used now, to write to a sysfs file of the
-event device. Instead of:
-  ..., SYSFS{type}=="0|7|14", RUN+="/bin/sh -c 'echo 60 > /sys$$DEVPATH/timeout'"
-we now can do:
-  ..., ATTR{type}=="0|7|14", ATTR{timeout}="60"
-
-All the PHYSDEV* keys are deprecated and will be removed from a
-future kernel:
-  PHYDEVPATH -    is the path of a parent device and should not be
-                  needed at all.
-  PHYSDEVBUS -    is just a SUBSYSTEM value of a parent, and can be
-                  matched with SUBSYSTEMS==
-  PHYSDEVDRIVER - for bus devices it is available as ENV{DRIVER}.
-                  Newer kernels will have DRIVER in the environment,
-                  for older kernels udev puts in. Class device will
-                  no longer carry this property of a parent and
-                  DRIVERS== can be used to match such a parent value.
-Note that ENV{DRIVER} is only available for a few bus devices, where
-the driver is already bound at device event time. On coldplug, the
-events for a lot devices are already bound to a driver, and they will have
-that value set. But on hotplug, at the time the kernel creates the device,
-it can't know what driver may claim the device after that, therefore
-in most cases it will be empty.
-
-Failed events should now be re-triggered with:
-   udevtrigger --retry-failed.
-Please switch to this command, so we keep the details of the /dev/.udev/failed/
-files private to the udev tools. We may need to switch the current symlink
-target, cause some obviously broken tools try to scan all files in /dev
-including /dev/.udev/, find the links to /sys and end up stat()'ing sysfs files
-million times. This takes ages on slow boxes.
-
-The udevinfo attribute walk (-a) now works with giving a device node
-name (-n) instead of a devpath (-p). The query now always works, also when
-no database file was created by udev.
-
-The built-in /etc/passwd /etc/group parser is removed, we always depend on
-getpwnam() and getgrnam() now. One of the next releases will depend on
-fnmatch() and may use getopt_long().
-
-udev 097
-========
-Bugfixes and small improvements.
-
-udev 096
-========
-Fix path_id for recent kernels.
-
-udev 095
-========
-%e is finally gone.
-
-Added support for swapping network interface names, by temporarily
-renaming the device and wait for the target name to become free.
-
-udev 094
-========
-The built-in MODALIAS key and substitution is removed.
-
-udev 093
-========
-The binary firmware helper is replaced by the usual simple
-shell script. Udevsend is removed from the tree.
-
-udev 092
-========
-Bugfix release.
-
-udev 091
-========
-Some more keys require the correct use of '==' and '=' depending
-on the kind of operation beeing an assignment or a match. Rules
-with invalid operations are skipped and logged to syslog. Please
-test with udevtest if the parsing of your rules throws errors and
-fix possibly broken rules.
-
-udev 090
-========
-Provide "udevsettle" to wait for all current udev events to finish.
-It also watches the current kernel netlink queue by comparing the
-even sequence number to make sure that there are no current pending
-events that have not already arrived in the daemon.
-
-udev 089
-========
-Fix rule to skip persistent rules for removable IDE devices, which
-also skipped optical IDE drives.
-
-All *_id program are installed in /lib/udev/ by default now.
-
-No binary is stripped anymore as this should be done in the
-packaging process and not at build time.
-
-libvolume_id is provided as a shared library now and vol_id is
-linked against it. Also one of the next HAL versions will require
-this library, and the HAL build process will also require the
-header file to be installed. The copy of the same code in HAL will
-be removed to have only a single copy left on the system.
-
-udev 088
-========
-Add persistent links for SCSI tapes. The rules file is renamed
-to 60-persistent-storage.rules.
-
-Create persistent path for usb devices. Can be used for all sorts
-of devices that can't be distinguished by other properties like
-multiple identical keyboards and mice connected to the same box.
-
-Provide "udevtrigger" program to request events on coldplug. The
-shell script is much too slow with thousends of devices.
-
-udev 087
-========
-Fix persistent disk rules to exclude removable IDE drives.
-
-Warn if %e, $modalias or MODALIAS is used.
-
-udev 086
-========
-Fix queue export, which wasn't correct for subsequent add/remove
-events for the same device.
-
-udev 085
-========
-Fix cramfs detection on big endian.
-
-Make WAIT_FOR_SYSFS usable in "normal" rules and silent if the whole
-device goes away.
-
-udev 084
-========
-If BUS== and SYSFS{}== have been used in the same rule, the sysfs
-attributes were only checked at the parent device that matched the
-by BUS requested subsystem. Fix it to also look at the device we
-received the event for.
-
-Build variable CROSS has changed to CROSS_COMPILE to match the kernel
-build name.
-
-udev 083
-========
-Fix a bug where NAME="" would prevent RUN from beeing executed.
-
-RUN="/bin/program" does not longer automatically add the subsystem
-as the first parameter. This is from the days of /sbin/hotplug
-which is dead now and it's just confusing to need to add a space at
-the end of the program name to prevent this.
-If you use rules that need the subsystem as the first parameter,
-like the old "udev_run_hotlugd" and "udev_run_devd", add the subsystem
-to the key like RUN+="/bin/program $env{SUBSYSTEM}".
-
-udev 082
-========
-The udev man page has moved to udev(7) as it does not describe a command
-anymore. The programs udev, udevstart and udevsend are no longer installed
-by default and must be copied manually, if they should be installed or
-included in a package.
-
-Fix a bug where "ignore_device" could run earlier collected RUN keys before
-the ignore rule was applied.
-
-More preparation for future sysfs changes. usb_id and scsi_id no longer
-depend on a magic order of devices in the /devices chain. Specific devices
-should be requested by their subsytem.
-
-This will always find the scsi parent device without depending on a specific
-path position:
-  dev = sysfs_device_get(devpath);
-  dev_usb = sysfs_device_get_parent_with_subsystem(dev, "scsi");
-
-The "device" link in the current sysfs layout will be automatically
-_resolved_ as a parent and in the new sysfs layout it will just _be_ the
-parent in the devpath. If a device is requested by it's symlink, like all
-class devices in the new sysfs layout will look like, it gets automatically
-resolved and substituted with the real devpath and not the symlink path.
-
-Note:
-A similar logic must be applied to _all_ sysfs users, including
-scripts, that search along parent devices in sysfs. The explicit use of
-the "device" link must be avoided. With the future sysfs layout all
-DEVPATH's will start with /devices/ and have a "subsystem" symlink poiting
-back to the "class" or the "bus". The layout of the parent devices in
-/devices is not necessarily expected to be stable across kernel releases and
-searching for parents by their subsystem should make sysfs users tolerant
-for changed parent chains.
-
-udev 081
-========
-Prepare udev to work with the experimental kernel patch, that moves
-/sys/class devices to /sys/devices and /sys/block to /sys/class/block.
-
-Clarify BUS, ID, $id usage and fix $id behavior. This prepares for
-moving the class devices to /sys/devices.
-
-Thanks again to Marco for help finding a hopefully nice compromise
-to make %b simpler and working again.
-
-udev 080
-========
-Complete removal of libsysfs, replaced by simple helper functions
-which are much simpler and a bit faster. The udev daemon operatesentirely
-on event parameters and does not use sysfs for simple rules anymore.
-Please report any new bugs/problems, that may be caused by this big
-change. They will be fixed immediately.
-
-The enumeration format character '%e' is deprecated and will be
-removed sometimes from a future udev version. It never worked correctly
-outside of udevstart, so we can't use it with the new parallel
-coldplug. A simple enumeration is as useless as the devfs naming
-scheme, just get rid of both if you still use it.
-
-MODALIAS and $modalias is not needed and will be removed from one of
-the next udev versions, replace it in all rules with ENV{MODALIAS} or
-the sysfs "modalias" value.
-
-Thanks a lot to Marco for all his help on finding and fixing bugs.
-
-udev 079
-========
-Let scsi_id request libata drive serial numbers from page 0x80.
-
-Renamed etc/udev/persistent.rules to persistent-disk.rules and
-added /dev/disk/by-name/* for device mapper device names.
-
-Removed %e from the man page. It never worked reliably outside
-of udevstart and udevstart is no longer recommended to use.
-
-udev 078
-========
-Symlinks are now exported to the event environment. Hopefully it's no
-longer needed to run udevinfo from an event process, like it was
-mentioned on the hotplug list:
-  UDEV  [1134776873.702967] add@/block/sdb
-  ...
-  DEVNAME=/dev/sdb
-  DEVLINKS=/dev/disk/by-id/usb-IBM_Memory_Key_0218B301030027E8 /dev/disk/by-path/usb-0218B301030027E8:0:0:0
-
-udev 077
-========
-Fix a problem if udevsend is used as the hotplug handler and tries to use
-syslog, which causes a "vc" event loop. 2.6.15 will make udevsend obsolete
-and this kind of problems will hopefully go away soon.
-
-udev 076
-========
-All built-in logic to work around bad sysfs timing is removed with this
-version. The need to wait for sysfs files is almost fixed with a kernel
-version that doesn't work with this udev version anyway. Until we fix
-the timing of the "bus" link creation, the former integrated logic should
-be emulated by a rule placed before all other rules:
-  ACTION=="add", DEVPATH=="/devices/*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus"
-
-The option "udev_db" does no longer exist. All udev state will be in
-/$udev_root/.udev/ now, there is no longer an option to set this
-to anything else.
-If the init script or something else used this value, just depend on
-this hardcoded path. But remember _all_content_ of this directory is
-still private to udev and can change at any time.
-
-Default location for rule sripts and helper programs is now: /lib/udev/.
-Everything that is not useful on the commandline should go into this
-directory. Some of the helpers in the extras folder are installed there
-now. The rules need to be changed, to find the helpers there.
-
-Also /lib/udev/devices is recommended as a directory where packages or
-the user can place real device nodes, which get copied over to /dev at
-every boot. This should replace the various solutions with custom config
-files.
-
-Udevsend does no longer start the udev daemon. This must be done with
-the init script that prepares /dev on tmpfs and creates the initial nodes,
-before starting the daemon.
-
-udev 075
-========
-Silent a too verbose error logging for the old hotplug.d/ dev.d/
-emulation.
-
-The copy of klibc is removed. A systemwide installed version of klibc
-should be used to build a klibc udev now.
-
-udev 074
-========
-NAME="" will not create any nodes, but execute RUN keys. To completely
-ignore an event the OPTION "ignore_device" should be used.
-
-After removal of the reorder queue, events with a TIMEOUT can be executed
-without any queuing now.
-
-udev 073
-========
-Fixed bug in udevd, if inotify is not available. We depend on netlink
-uevents now, kernels without that event source will not work with that
-version of udev anymore.
-
-udev 072
-========
-The rule parsing happens now in the daemon once at startup, all udev
-event processes inherit the already parsed rules from the daemon.
-It is shipped with SUSE10.0 and reduces heavily the system load at
-startup. The option to save precompiled rules and let the udev process
-pick the them up is removed, as it's no longer needed.
-
-Kernel 2.6.15 will have symlinks at /class/input pointing to the real
-device. Libsysfs is changed to "translate" the requested link into the
-real device path, as it would happen with the hotplug event. Otherwise
-device removal and the udev database will not work.
-
-Using 'make STRIPCMD=' will leave the binaries unstripped for debugging
-and packaging.
-
-A few improvements for vol_id, the filesytem probing code.
-
-udev 071
-========
-Fix a stupid typo in extras/run_directory for "make install".
-
-scsi_id creates the temporary devnode now in /dev for usage with a
-non-writable /tmp directory.
-
-The uevent kernel socket buffer can carry app. 50.000 events now,
-let's see who can break this again. :)
-
-The upcoming kernel will have a new input driver core integration.
-Some class devices are now symlinks to the real device. libsysfs
-needs a fix for this to work correctly. Udevstart of older udev
-versions will _not_ create these devices!
-
-udev 070
-========
-Fix a 'install' target in the Makefile, that prevents EXTRAS from
-beeing installed.
-
-udev 069
-========
-A bunch of mostly trivial bugfixes. From now on no node name or
-symlink name can contain any character than plain whitelisted ascii
-characters or validated utf8 byte-streams. This is needed for the
-/dev/disk/by-label/* links, because we import untrusted data and
-export it to the filesystem.
-
-udev 068
-========
-More bugfixes. If udevd was started from the kernel, we don't
-have stdin/stdout/stderr, which broke the forked tools in some
-situations.
-
-udev 067
-========
-Bugfix. udevstart event ordering was broken for a long time.
-The new run_program() uncovered it, because /dev/null was not
-available while we try to run external programs.
-Now udevstart should create it before we run anything.
-
-udev 066
-========
-Minor bugfixes and some distro rules updates. If you don't have the
-persistent disk rules in /dev/disk/by-*/* on your distro, just
-grab it from here. :)
-
-udev 065
-========
-We can use socket communication now to pass events from udev to
-other programs:
-  RUN+="socket:/org/freedesktop/hal/udev_event"
-will pass the whole udev event to the HAL daemon without the need
-for a forked helper. (See ChangeLog for udevmonitor, as an example)
-
-udev 064
-========
-Mostly bugfixes and see ChangeLog.
-
-The test for the existence of an environment value should be
-switched from:
-  ENV{KEY}=="*" to ENV{KEY}=="?*"
-because "*" will not fail anymore, if the key does not exist or
-is empty.
-
-udev 063
-========
-Bugfixes and a few tweaks described in the ChangeLog.
-
-udev 062
-========
-Mostly a Bugfix release.
-
-Added WAIT_FOR_SYSFS="<attribute>" to be able to fight against the sysfs
-timing with custom rules.
-
-udev 061
-========
-We changed the  internal rule storage format. Our large rule files took
-2 MB of RAM, with the change we are down to 99kB.
-
-If the device-node has been created with default name and no symlink or
-options are to remenber, it is not longer stored in the udevdb. HAL will
-need to be updated to work correctly with that change.
-
-To overrride optimization flags, OPTFLAGS may be used now.
-
-udev 060
-========
-Bugfix release.
-
-udev 059
-========
-Major changes happened with this release. The goal is to take over the
-complete kernel-event handling and provide a more efficient way to dispatch
-kernel events. Replacing most of the current shell script logic and the
-kernel forked helper with a netlink-daemon and a rule-based event handling.
-
-o udevd listens to netlink events now. The first valid netlink event
-  will make udevd ignore any message from udevsend that contains a
-  SEQNUM, to avoid duplicate events. The forked events can be disabled
-  with:
-    echo "" > /proc/sys/kernel/hotplug
-  For full support, the broken input-subsytem needs to be fixed, not to
-  bypass the driver core.
-
-o /etc/dev.d/ + /etc/hotplug.d/ directory multiplexing is completely
-  removed from udev itself and must be emulated by calling small
-  helper binaries provided in the extras folder:
-    make EXTRAS=extras/run_directory/
-  will build udev_run_devd and udev_run_hotplugd, which can be called
-  from a rule if needed:
-    RUN+="/sbin/udev_run_hotplugd"
-  The recommended way to handle this is to convert all the calls from
-  the directories to explicit udev rules and get completely rid of the
-  multiplexing. (To catch a ttyUSB event, you now no longer need to
-  fork and exit 300 tty script instances you are not interested in, it
-  is just one rule that matches exactly the device.)
-
-o udev handles now _all_ events not just events for class and block
-  devices, this way it is possible to control the complete event
-  behavior with udev rules. Especially useful for rules like:
-    ACTION="add", DEVPATH="/devices/*", MODALIAS=="?*", RUN+="/sbin/modprobe $modalias"
-
-o As used in the modalias rule, udev supports now textual
-  substitution placeholder along with the usual format chars. This
-  needs to be documented, for now it's only visible in udev_rules_parse.c.
-
-o The rule keys support now more operations. This is documented in the
-  man page. It is possible to add values to list-keys like the SYMLINK
-  and RUN list with KEY+="value" and to clear the list by assigning KEY="".
-  Also "final"-assignments are supported by using KEY:="value", which will
-  prevent changing the key by any later rule.
-
-o kernel 2.6.12 has the "detached_state" attribute removed from
-  sysfs, which was used to recognize sysfs population. We switched that
-  to wait for the "bus" link, which is only available in kernels after 2.6.11.
-  Running this udev version on older kernels may cause a short delay for
-  some events.
-
-o To provide infrastructure for persistent device naming, the id programs:
-  scsi_id, vol_id (former udev_volume_id), and ata_id (new) are able now
-  to export the probed data in environment key format:
-    pim:~ # /sbin/ata_id --export /dev/hda
-    ID_MODEL=HTS726060M9AT00
-    ID_SERIAL=MRH401M4G6UM9B
-    ID_REVISION=MH4OA6BA
-
-  The following rules:
-    KERNEL="hd*[!0-9]", IMPORT="/sbin/ata_id --export $tempnode"
-    KERNEL="hd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_MODEL}_$env{ID_SERIAL}"
-
-  Will create:
-    kay@pim:~> tree /dev/disk
-    /dev/disk
-    |-- by-id
-    |   |-- HTS726060M9AT00_MRH401M4G6UM9B -> ../../hda
-    |   `-- IBM-Memory_Key -> ../../sda
-    |-- by-label
-    |   |-- swap -> ../../hda1
-    |   |-- date -> ../../sda1
-    |   `-- home -> ../../hda3
-    `-- by-uuid
-        |-- 2E08712B0870F2E7 -> ../../hda3
-        |-- 9352cfef-7687-47bc-a2a3-34cf136f72e1 -> ../../hda1
-        |-- E845-7A89 -> ../../sda1
-        `-- b2a61681-3812-4f13-a4ff-920d70604299 -> ../../hda2
-
-  The IMPORT= operation will import these keys in the environment and make
-  it available for later PROGRAM= and RUN= executed programs. The keys are
-  also stored in the udevdb and can be queried from there with one of the
-  next udev versions.
-
-o A few binaries are silently added to the repository, which can be used
-  to replay kernel events from initramfs instead of using coldplug. udevd
-  can be instructed now to queue-up events while the stored events from
-  initramfs are filled into the udevd-queue. This code is still under
-  development and there is no documentation now besides the code itself.
-  The additional binaries get compiled, but are not installed by default.
-
-o There is also a temporary fix for a performance problem where too many
-  events happen in parallel and every event needs to parse the rules.
-  udev can now read precompiled rules stored on disk. This is likely to be
-  replaced by a more elegant solution in a future udev version.
-
-udev 058
-========
-With kernel version 2.6.12, the sysfs file "detached_state" was removed.
-Fix for libsysfs not to expect this file was added.
-
-udev 057
-========
-All rules are applied now, but only the first matching rule with a NAME-key
-will be applied. All later rules with NAME-key are completely ignored. This
-way system supplied symlinks or permissions gets applied to user-defined
-naming rules.
-
-Note:
-Please check your rules setup, if you may need to add OPTIONS="last_rule"
-to some rules, to keep the old behavior.
-
-The rules are read on "remove"-events too. That makes is possible to match
-with keys that are available on remove (KERNEL, SUBSYSTEM, ID, ENV, ...) to
-instruct udev to ignore an event (OPTIONS="ignore_device").
-The new ACTION-key may be used to let a rule act only at a "remove"-event.
-
-The new RUN-key supports rule-based execution of programs after device-node
-handling. This is meant as a general replacement for the dev.d/-directories
-to give fine grained control over the execution of programs.
-
-The %s{}-sysfs format char replacement values are searched at any of the
-devices in the device chain now, not only at the class-device.
-
-We support log priority levels now. The value udev_log in udev.conf is used
-to determine what is printed to syslog. This makes it possible to
-run a version with compiled-in debug messages in a production environment
-which is sometimes needed to find a bug.
-It is still possible to supress the inclusion of _any_ syslog usage with
-USE_LOG=false to create the smallest possible binaries if needed.
-The configured udev_log value can be overridden with the environment variable
-UDEV_LOG.
-
-udev 056
-========
-Possible use of a system-wide klibc:
-  make USE_KLIBC=true KLCC=/usr/bin/klcc all
-will link against an external klibc and our own version will be ignored.
-
-udev 055
-========
-We support an unlimited count of symlinks now.
-
-If USE_STATIC=true is passed to a glibc build, we link statically and use
-a built-in userdb parser to resolve user and group names.
-
-The PLACE= key is gone. It can be replaced by an ID= for a long time, because
-we walk up the chain of physical devices to find a match.
-
-The KEY="<value>" format supports '=', '==', '!=,' , '+=' now. This makes it
-easy to skip certain attribute matches without composing rules with weird
-character class negations like:
-  KERNEL="[!s][!c][!d]*"
-this can now be replaced with:
-  KERNEL!="scd*"
-The current simple '=' is still supported, and should work as it does today,
-but existing rules should be converted if possible, to be better readable.
-
-We have new ENV{}== key now, to match against a maximum of 5 environment
-variables.
-
-udevstart is its own binary again, because we don't need co carry this araound
-with every forked event.
diff --git a/src/udev/README b/src/udev/README
deleted file mode 100644
index 38459c6b2..000000000
--- a/src/udev/README
+++ /dev/null
@@ -1,101 +0,0 @@
-udev - Linux userspace device management
-
-Integrating udev in the system has complex dependencies and may differ from
-distribution to distribution. A system may not be able to boot up or work
-reliably without a properly installed udev version. The upstream udev project
-does not recommend replacing a distro's udev installation with the upstream
-version.
-
-The upstream udev project's set of default rules may require a most recent
-kernel release to work properly.
-
-Tools and rules shipped by udev are not public API and may change at any time.
-Never call any private tool in /usr/lib/udev from any external application; it
-might just go away in the next release. Access to udev information is only offered
-by udevadm and libudev. Tools and rules in /usr/lib/udev and the entire contents
-of the /run/udev directory are private to udev and do change whenever needed.
-
-Requirements:
-  - Version 2.6.34 of the Linux kernel with sysfs, procfs, signalfd, inotify,
-    unix domain sockets, networking and hotplug enabled
-
-  - Some architectures might need a later kernel, that supports accept4(),
-    or need to backport the accept4() syscall wiring in the kernel.
-
-  - These options are required:
-      CONFIG_DEVTMPFS=y
-      CONFIG_HOTPLUG=y
-      CONFIG_INOTIFY_USER=y
-      CONFIG_NET=y
-      CONFIG_PROC_FS=y
-      CONFIG_SIGNALFD=y
-      CONFIG_SYSFS=y
-      CONFIG_SYSFS_DEPRECATED*=n
-      CONFIG_UEVENT_HELPER_PATH=""
-
-  - These options might be needed:
-      CONFIG_BLK_DEV_BSG=y (SCSI devices)
-      CONFIG_TMPFS_POSIX_ACL=y (user ACLs for device nodes)
-
-  - The /dev directory needs the 'devtmpfs' filesystem mounted.
-    Udev only manages the permissions and ownership of the
-    kernel-provided device nodes, and possibly creates additional symlinks.
-
-  - Udev requires /run to be writable, which is usually done by mounting a
-    'tmpfs' filesystem.
-
-  - This version of udev does not work properly with the CONFIG_SYSFS_DEPRECATED*
-    option enabled.
-
-  - The deprecated hotplug helper /sbin/hotplug should be disabled in the
-    kernel configuration, it is not needed today, and may render the system
-    unusable because the kernel may create too many processes in parallel
-    so that the system runs out-of-memory.
-
-  - The proc filesystem must be mounted on /proc, and the sysfs filesystem must
-    be mounted at /sys. No other locations are supported by a standard
-    udev installation.
-
-  - The default rule sset requires the following group names resolvable at udev startup:
-      disk, cdrom, floppy, tape, audio, video, lp, tty, dialout, and kmem.
-    Especially in LDAP setups, it is required that getgrnam() be able to resolve
-    these group names with only the rootfs mounted and while no network is
-    available.
-
-  - Some udev extras have external dependencies like:
-      libglib2, usbutils, pciutils, and gperf.
-    All these extras can be disabled with configure options.
-
-Setup:
-  - The udev daemon should be started to handle device events sent by the kernel.
-    During bootup, the events for already existing devices can be replayed, so
-    that they are configured by udev. The systemd service files contain the
-    needed commands to start the udev daemon and the coldplug sequence.
-
-  - Restarting the daemon never applies any rules to existing devices.
-
-  - New/changed rule files are picked up automatically; there is usually no
-    daemon restart or signal needed.
-
-Operation:
-  - Based on events the kernel sends out on device creation/removal, udev
-    creates/removes device nodes and symlinks in the /dev directory.
-
-  - All kernel events are matched against a set of specified rules, which
-    possibly hook into the event processing and load required kernel
-    modules to set up devices. For all devices, the kernel exports a major/minor
-    number; if needed, udev creates a device node with the default kernel
-    device name. If specified, udev applies permissions/ownership to the device
-    node, creates additional symlinks pointing to the node, and executes
-    programs to handle the device.
-
-  - The events udev handles, and the information udev merges into its device
-    database, can be accessed with libudev:
-      http://www.kernel.org/pub/linux/utils/kernel/hotplug/libudev/
-      http://www.kernel.org/pub/linux/utils/kernel/hotplug/gudev/
-
-For more details about udev and udev rules, see the udev man pages:
-      http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev/
-
-Please direct any comment/question to the linux-hotplug mailing list at:
-  linux-hotplug@vger.kernel.org
diff --git a/src/udev/TODO b/src/udev/TODO
deleted file mode 100644
index 8b8b9c8f8..000000000
--- a/src/udev/TODO
+++ /dev/null
@@ -1,22 +0,0 @@
- - find a way to tell udev to not cancel firmware
-   requests in initramfs
-
- - scsi_id -> sg3_utils?
-
- - make gtk-doc optional like kmod
-
- - move /usr/lib/udev/devices/ to tmpfiles
-
- - trigger --subsystem-match=usb/usb_device
-
- - kill rules_generator
-
- - have a $attrs{} ?
-
- - remove RUN+="socket:"
-
- - libudev.so.1
-     - symbol versioning
-     - return object with *_unref()
-     - udev_monitor_from_socket()
-     - udev_queue_get_failed_list_entry()
diff --git a/src/udev/src/accelerometer/61-accelerometer.rules b/src/udev/accelerometer/61-accelerometer.rules
index a6a2bfd08..a6a2bfd08 100644
--- a/src/udev/src/accelerometer/61-accelerometer.rules
+++ b/src/udev/accelerometer/61-accelerometer.rules
diff --git a/src/udev/src/accelerometer/accelerometer.c b/src/udev/accelerometer/accelerometer.c
index bc9715b26..bc9715b26 100644
--- a/src/udev/src/accelerometer/accelerometer.c
+++ b/src/udev/accelerometer/accelerometer.c
diff --git a/src/udev/src/ata_id/ata_id.c b/src/udev/ata_id/ata_id.c
index 846a73b54..846a73b54 100644
--- a/src/udev/src/ata_id/ata_id.c
+++ b/src/udev/ata_id/ata_id.c
diff --git a/src/udev/autogen.sh b/src/udev/autogen.sh
deleted file mode 100755
index 55ee03afd..000000000
--- a/src/udev/autogen.sh
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/sh -e
-
-if [ -f .git/hooks/pre-commit.sample -a ! -f .git/hooks/pre-commit ] ; then
-        cp -p .git/hooks/pre-commit.sample .git/hooks/pre-commit && \
-        chmod +x .git/hooks/pre-commit && \
-        echo "Activated pre-commit hook."
-fi
-
-gtkdocize
-autoreconf --install --symlink
-
-libdir() {
-        echo $(cd $1/$(gcc -print-multi-os-directory); pwd)
-}
-
-args="$args \
---prefix=/usr \
---sysconfdir=/etc \
---libdir=$(libdir /usr/lib) \
---with-selinux \
---enable-gtk-doc"
-
-if [ -L /bin ]; then
-args="$args \
---libexecdir=/usr/lib \
---with-systemdsystemunitdir=/usr/lib/systemd/system \
-"
-else
-args="$args \
---with-rootprefix= \
----with-rootlibdir=$(libdir /lib) \
---bindir=/sbin \
---libexecdir=/lib \
---with-systemdsystemunitdir=/lib/systemd/system \
-"
-fi
-
-echo
-echo "----------------------------------------------------------------"
-echo "Initialized build system. For a common configuration please run:"
-echo "----------------------------------------------------------------"
-echo
-echo "./configure CFLAGS='-g -O1' $args"
-echo
diff --git a/src/udev/src/cdrom_id/60-cdrom_id.rules b/src/udev/cdrom_id/60-cdrom_id.rules
index 6eaf76a72..6eaf76a72 100644
--- a/src/udev/src/cdrom_id/60-cdrom_id.rules
+++ b/src/udev/cdrom_id/60-cdrom_id.rules
diff --git a/src/udev/src/cdrom_id/cdrom_id.c b/src/udev/cdrom_id/cdrom_id.c
index f90d52ec9..f90d52ec9 100644
--- a/src/udev/src/cdrom_id/cdrom_id.c
+++ b/src/udev/cdrom_id/cdrom_id.c
diff --git a/src/udev/src/collect/collect.c b/src/udev/collect/collect.c
index 076fe479e..076fe479e 100644
--- a/src/udev/src/collect/collect.c
+++ b/src/udev/collect/collect.c
diff --git a/src/udev/configure.ac b/src/udev/configure.ac
deleted file mode 100644
index b31b62f28..000000000
--- a/src/udev/configure.ac
+++ /dev/null
@@ -1,242 +0,0 @@
-AC_PREREQ(2.60)
-AC_INIT([udev],
-       [182],
-       [linux-hotplug@vger.kernel.org],
-       [udev],
-       [http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html])
-AC_CONFIG_SRCDIR([src/udevd.c])
-AC_CONFIG_AUX_DIR([build-aux])
-AM_INIT_AUTOMAKE([check-news foreign 1.11 -Wall -Wno-portability silent-rules tar-pax no-dist-gzip dist-xz subdir-objects])
-AC_USE_SYSTEM_EXTENSIONS
-AC_SYS_LARGEFILE
-AC_CONFIG_MACRO_DIR([m4])
-AM_SILENT_RULES([yes])
-LT_INIT([disable-static])
-AC_PROG_AWK
-AC_PROG_SED
-AC_PROG_MKDIR_P
-GTK_DOC_CHECK(1.10)
-AC_PREFIX_DEFAULT([/usr])
-
-AC_PATH_PROG([XSLTPROC], [xsltproc])
-AM_CONDITIONAL(HAVE_XSLTPROC, test x"$XSLTPROC" != x)
-
-AC_SEARCH_LIBS([clock_gettime], [rt], [], [AC_MSG_ERROR([POSIX RT library not found])])
-
-PKG_CHECK_MODULES(BLKID, blkid >= 2.20)
-
-PKG_CHECK_MODULES(KMOD, libkmod >= 5)
-
-AC_ARG_WITH([rootprefix],
-       AS_HELP_STRING([--with-rootprefix=DIR], [rootfs directory prefix for config files and kernel modules]),
-       [], [with_rootprefix=${ac_default_prefix}])
-AC_SUBST([rootprefix], [$with_rootprefix])
-
-AC_ARG_WITH([rootlibdir],
-       AS_HELP_STRING([--with-rootlibdir=DIR], [rootfs directory to install shared libraries]),
-       [], [with_rootlibdir=$libdir])
-AC_SUBST([rootlib_execdir], [$with_rootlibdir])
-
-AC_ARG_WITH([selinux],
-       AS_HELP_STRING([--with-selinux], [enable SELinux support]),
-       [], [with_selinux=no])
-AS_IF([test "x$with_selinux" = "xyes"], [
-       LIBS_save=$LIBS
-       AC_CHECK_LIB(selinux, getprevcon,
-              [],
-              AC_MSG_ERROR([SELinux selected but libselinux not found]))
-       LIBS=$LIBS_save
-       SELINUX_LIBS="-lselinux -lsepol"
-       AC_DEFINE(WITH_SELINUX, [1] ,[SELinux support.])
-])
-AC_SUBST([SELINUX_LIBS])
-AM_CONDITIONAL(WITH_SELINUX, [test "x$with_selinux" = "xyes"])
-
-AC_ARG_ENABLE([debug],
-       AS_HELP_STRING([--enable-debug], [enable debug messages @<:@default=disabled@:>@]),
-       [], [enable_debug=no])
-AS_IF([test "x$enable_debug" = "xyes"], [ AC_DEFINE(ENABLE_DEBUG, [1], [Debug messages.]) ])
-
-AC_ARG_ENABLE([logging],
-       AS_HELP_STRING([--disable-logging], [disable system logging @<:@default=enabled@:>@]),
-       [], enable_logging=yes)
-AS_IF([test "x$enable_logging" = "xyes"], [ AC_DEFINE(ENABLE_LOGGING, [1], [System logging.]) ])
-
-AC_ARG_ENABLE([manpages],
-        AS_HELP_STRING([--disable-manpages], [disable man pages @<:@default=enabled@:>@]),
-        [], enable_manpages=yes)
-AM_CONDITIONAL([ENABLE_MANPAGES], [test "x$enable_manpages" = "xyes"])
-
-if test "x$cross_compiling" = "xno" ; then
-       AC_CHECK_FILES([/usr/share/pci.ids], [pciids=/usr/share/pci.ids])
-       AC_CHECK_FILES([/usr/share/hwdata/pci.ids], [pciids=/usr/share/hwdata/pci.ids])
-       AC_CHECK_FILES([/usr/share/misc/pci.ids], [pciids=/usr/share/misc/pci.ids])
-fi
-
-AC_ARG_WITH(usb-ids-path,
-       [AS_HELP_STRING([--with-usb-ids-path=DIR], [Path to usb.ids file])],
-       [USB_DATABASE=${withval}],
-       [if test -n "$usbids" ; then
-              USB_DATABASE="$usbids"
-       else
-              PKG_CHECK_MODULES(USBUTILS, usbutils >= 0.82)
-              AC_SUBST([USB_DATABASE], [$($PKG_CONFIG --variable=usbids usbutils)])
-       fi])
-AC_MSG_CHECKING([for USB database location])
-AC_MSG_RESULT([$USB_DATABASE])
-AC_SUBST(USB_DATABASE)
-
-AC_ARG_WITH(pci-ids-path,
-       [AS_HELP_STRING([--with-pci-ids-path=DIR], [Path to pci.ids file])],
-       [PCI_DATABASE=${withval}],
-       [if test -n "$pciids" ; then
-              PCI_DATABASE="$pciids"
-       else
-              AC_MSG_ERROR([pci.ids not found, try --with-pci-ids-path=])
-       fi])
-AC_MSG_CHECKING([for PCI database location])
-AC_MSG_RESULT([$PCI_DATABASE])
-AC_SUBST(PCI_DATABASE)
-
-AC_ARG_WITH(firmware-path,
-       AS_HELP_STRING([--with-firmware-path=DIR[[[:DIR[...]]]]],
-          [Firmware search path (default=ROOTPREFIX/lib/firmware/updates:ROOTPREFIX/lib/firmware)]),
-       [], [with_firmware_path="$rootprefix/lib/firmware/updates:$rootprefix/lib/firmware"])
-OLD_IFS=$IFS
-IFS=:
-for i in $with_firmware_path; do
-       if test "x${FIRMWARE_PATH}" = "x"; then
-              FIRMWARE_PATH="\\\"${i}/\\\""
-       else
-              FIRMWARE_PATH="${FIRMWARE_PATH}, \\\"${i}/\\\""
-       fi
-done
-IFS=$OLD_IFS
-AC_SUBST([FIRMWARE_PATH], [$FIRMWARE_PATH])
-
-AC_ARG_WITH([systemdsystemunitdir],
-       AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files]),
-       [], [with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)])
-AS_IF([test "x$with_systemdsystemunitdir" != "xno"], [ AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir]) ])
-AM_CONDITIONAL(WITH_SYSTEMD, [test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != "xno" ])
-
-# ------------------------------------------------------------------------------
-# GUdev - libudev gobject interface
-# ------------------------------------------------------------------------------
-AC_ARG_ENABLE([gudev],
-       AS_HELP_STRING([--disable-gudev], [disable Gobject libudev support @<:@default=enabled@:>@]),
-       [], [enable_gudev=yes])
-AS_IF([test "x$enable_gudev" = "xyes"], [ PKG_CHECK_MODULES([GLIB], [glib-2.0 >= 2.22.0 gobject-2.0 >= 2.22.0]) ])
-
-AC_ARG_ENABLE([introspection],
-       AS_HELP_STRING([--disable-introspection], [disable GObject introspection @<:@default=enabled@:>@]),
-       [], [enable_introspection=yes])
-AS_IF([test "x$enable_introspection" = "xyes"], [
-       PKG_CHECK_MODULES([INTROSPECTION], [gobject-introspection-1.0 >= 0.6.2])
-       AC_DEFINE([ENABLE_INTROSPECTION], [1], [enable GObject introspection support])
-       AC_SUBST([G_IR_SCANNER], [$($PKG_CONFIG --variable=g_ir_scanner gobject-introspection-1.0)])
-       AC_SUBST([G_IR_COMPILER], [$($PKG_CONFIG --variable=g_ir_compiler gobject-introspection-1.0)])
-       AC_SUBST([G_IR_GENERATE], [$($PKG_CONFIG --variable=g_ir_generate gobject-introspection-1.0)])
-       AC_SUBST([GIRDIR], [$($PKG_CONFIG --define-variable=datadir=${datadir} --variable=girdir gobject-introspection-1.0)])
-       AC_SUBST([GIRTYPELIBDIR], [$($PKG_CONFIG --define-variable=libdir=${libdir} --variable=typelibdir gobject-introspection-1.0)])
-])
-AM_CONDITIONAL([ENABLE_INTROSPECTION], [test "x$enable_introspection" = "xyes"])
-AM_CONDITIONAL([ENABLE_GUDEV], [test "x$enable_gudev" = "xyes"])
-
-# ------------------------------------------------------------------------------
-# keymap - map custom hardware's multimedia keys
-# ------------------------------------------------------------------------------
-AC_ARG_ENABLE([keymap],
-       AS_HELP_STRING([--disable-keymap], [disable keymap fixup support @<:@default=enabled@:>@]),
-       [], [enable_keymap=yes])
-AS_IF([test "x$enable_keymap" = "xyes"], [
-       AC_PATH_PROG([GPERF], [gperf])
-       if test -z "$GPERF"; then
-              AC_MSG_ERROR([gperf is needed])
-       fi
-
-       AC_CHECK_HEADER([linux/input.h], [:], AC_MSG_ERROR([kernel headers not found]))
-       AC_SUBST([INCLUDE_PREFIX], [$(echo '#include <linux/input.h>' | eval $ac_cpp -E - | sed -n '/linux\/input.h/ {s:.*"\(.*\)/linux/input.h".*:\1:; p; q}')])
-])
-AM_CONDITIONAL([ENABLE_KEYMAP], [test "x$enable_keymap" = "xyes"])
-
-# ------------------------------------------------------------------------------
-# mtd_probe - autoloads FTL module for mtd devices
-# ------------------------------------------------------------------------------
-AC_ARG_ENABLE([mtd_probe],
-       AS_HELP_STRING([--disable-mtd_probe], [disable MTD support @<:@default=enabled@:>@]),
-       [], [enable_mtd_probe=yes])
-AM_CONDITIONAL([ENABLE_MTD_PROBE], [test "x$enable_mtd_probe" = "xyes"])
-
-# ------------------------------------------------------------------------------
-# rule_generator - persistent network and optical device rule generator
-# ------------------------------------------------------------------------------
-AC_ARG_ENABLE([rule_generator],
-       AS_HELP_STRING([--enable-rule_generator], [enable persistent network + cdrom links support @<:@default=disabled@:>@]),
-       [], [enable_rule_generator=no])
-AM_CONDITIONAL([ENABLE_RULE_GENERATOR], [test "x$enable_rule_generator" = "xyes"])
-
-# ------------------------------------------------------------------------------
-# create_floppy_devices - historical floppy kernel device nodes (/dev/fd0h1440, ...)
-# ------------------------------------------------------------------------------
-AC_ARG_ENABLE([floppy],
-       AS_HELP_STRING([--enable-floppy], [enable legacy floppy support @<:@default=disabled@:>@]),
-       [], [enable_floppy=no])
-AM_CONDITIONAL([ENABLE_FLOPPY], [test "x$enable_floppy" = "xyes"])
-
-my_CFLAGS="-Wall \
--Wmissing-declarations -Wmissing-prototypes \
--Wnested-externs -Wpointer-arith \
--Wpointer-arith -Wsign-compare -Wchar-subscripts \
--Wstrict-prototypes -Wshadow \
--Wformat-security -Wtype-limits"
-AC_SUBST([my_CFLAGS])
-
-AC_CONFIG_HEADERS(config.h)
-AC_CONFIG_FILES([
-       Makefile
-       src/docs/Makefile
-       src/docs/version.xml
-       src/gudev/docs/Makefile
-       src/gudev/docs/version.xml
-])
-
-AC_OUTPUT
-AC_MSG_RESULT([
-        $PACKAGE $VERSION
-        ========
-
-        prefix:                  ${prefix}
-        rootprefix:              ${rootprefix}
-        sysconfdir:              ${sysconfdir}
-        bindir:                  ${bindir}
-        libdir:                  ${libdir}
-        rootlibdir:              ${rootlib_execdir}
-        libexecdir:              ${libexecdir}
-        datarootdir:             ${datarootdir}
-        mandir:                  ${mandir}
-        includedir:              ${includedir}
-        include_prefix:          ${INCLUDE_PREFIX}
-        systemdsystemunitdir:    ${systemdsystemunitdir}
-        firmware path:           ${FIRMWARE_PATH}
-        usb.ids:                 ${USB_DATABASE}
-        pci.ids:                 ${PCI_DATABASE}
-
-        compiler:                ${CC}
-        cflags:                  ${CFLAGS}
-        ldflags:                 ${LDFLAGS}
-        xsltproc:                ${XSLTPROC}
-        gperf:                   ${GPERF}
-
-        logging:                 ${enable_logging}
-        debug:                   ${enable_debug}
-        selinux:                 ${with_selinux}
-
-        man pages                ${enable_manpages}
-        gudev:                   ${enable_gudev}
-        gintrospection:          ${enable_introspection}
-        keymap:                  ${enable_keymap}
-        mtd_probe:               ${enable_mtd_probe}
-        rule_generator:          ${enable_rule_generator}
-        floppy:                  ${enable_floppy}
-])
diff --git a/src/udev/src/docs/.gitignore b/src/udev/docs/.gitignore
index dca700a99..1fb9c5142 100644
--- a/src/udev/src/docs/.gitignore
+++ b/src/udev/docs/.gitignore
@@ -1,3 +1,4 @@
+Makefile
 libudev-overrides.txt
 html/
 tmpl/
diff --git a/src/udev/src/docs/Makefile.am b/src/udev/docs/Makefile.am
index 07d06eb14..7cd4f9742 100644
--- a/src/udev/src/docs/Makefile.am
+++ b/src/udev/docs/Makefile.am
@@ -21,7 +21,7 @@ DOC_MAIN_SGML_FILE=$(DOC_MODULE)-docs.xml
 # gtk-doc will search all .c & .h files beneath here for inline comments
 # documenting the functions and macros.
 # e.g. DOC_SOURCE_DIR=../../../gtk
-DOC_SOURCE_DIR=$(top_srcdir)/src
+DOC_SOURCE_DIR=$(top_srcdir)/src/udev
 
 # Extra options to pass to gtkdoc-scangobj. Not normally needed.
 SCANGOBJ_OPTIONS=
@@ -48,8 +48,8 @@ FIXXREF_OPTIONS=
 # Used for dependencies. The docs will be rebuilt if any of these change.
 # e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h
 # e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c
-HFILE_GLOB=$(top_srcdir)/src/libudev*.h
-CFILE_GLOB=$(top_srcdir)/src/libudev*.c
+HFILE_GLOB=$(top_srcdir)/src/udev/libudev*.h
+CFILE_GLOB=$(top_srcdir)/src/udev/libudev*.c
 
 # Extra header to include when scanning, which are not under DOC_SOURCE_DIR
 # e.g. EXTRA_HFILES=$(top_srcdir}/contrib/extra.h
diff --git a/src/udev/src/docs/libudev-docs.xml b/src/udev/docs/libudev-docs.xml
index b7feb4552..b7feb4552 100644
--- a/src/udev/src/docs/libudev-docs.xml
+++ b/src/udev/docs/libudev-docs.xml
diff --git a/src/udev/src/docs/libudev-sections.txt b/src/udev/docs/libudev-sections.txt
index 15c3e934b..15c3e934b 100644
--- a/src/udev/src/docs/libudev-sections.txt
+++ b/src/udev/docs/libudev-sections.txt
diff --git a/src/udev/src/docs/libudev.types b/src/udev/docs/libudev.types
index e69de29bb..e69de29bb 100644
--- a/src/udev/src/docs/libudev.types
+++ b/src/udev/docs/libudev.types
diff --git a/src/udev/src/docs/version.xml.in b/src/udev/docs/version.xml.in
index d78bda934..d78bda934 100644
--- a/src/udev/src/docs/version.xml.in
+++ b/src/udev/docs/version.xml.in
diff --git a/src/udev/src/gudev/.gitignore b/src/udev/gudev/.gitignore
index d20fa523e..d20fa523e 100644
--- a/src/udev/src/gudev/.gitignore
+++ b/src/udev/gudev/.gitignore
diff --git a/src/udev/src/gudev/docs/.gitignore b/src/udev/gudev/docs/.gitignore
index 8eada6d40..5d7d73d9a 100644
--- a/src/udev/src/gudev/docs/.gitignore
+++ b/src/udev/gudev/docs/.gitignore
@@ -1,3 +1,4 @@
+Makefile
 gudev-overrides.txt
 gudev-decl-list.txt
 gudev-decl.txt
diff --git a/src/udev/src/gudev/docs/Makefile.am b/src/udev/gudev/docs/Makefile.am
index cfe696c50..036ef4302 100644
--- a/src/udev/src/gudev/docs/Makefile.am
+++ b/src/udev/gudev/docs/Makefile.am
@@ -21,7 +21,7 @@ DOC_MAIN_SGML_FILE=$(DOC_MODULE)-docs.xml
 # gtk-doc will search all .c & .h files beneath here for inline comments
 # documenting the functions and macros.
 # e.g. DOC_SOURCE_DIR=../../../gtk
-DOC_SOURCE_DIR=$(top_srcdir)/src
+DOC_SOURCE_DIR=$(top_srcdir)/src/udev/gudev
 
 # Extra options to pass to gtkdoc-scangobj. Not normally needed.
 SCANGOBJ_OPTIONS=
@@ -48,8 +48,8 @@ FIXXREF_OPTIONS=
 # Used for dependencies. The docs will be rebuilt if any of these change.
 # e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h
 # e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c
-HFILE_GLOB=$(top_srcdir)/src/gudev/*.h
-CFILE_GLOB=$(top_srcdir)/src/gudev/*.c
+HFILE_GLOB=$(top_srcdir)/src/udev/gudev/*.h
+CFILE_GLOB=$(top_srcdir)/src/udev/gudev/*.c
 
 # Extra header to include when scanning, which are not under DOC_SOURCE_DIR
 # e.g. EXTRA_HFILES=$(top_srcdir}/contrib/extra.h
@@ -80,8 +80,8 @@ expand_content_files=
 GTKDOC_CFLAGS = \
         $(DBUS_GLIB_CFLAGS) \
         $(GLIB_CFLAGS) \
-        -I$(top_srcdir)/src/gudev \
-        -I$(top_builddir)/src/gudev
+        -I$(top_srcdir)/src/udev/gudev \
+        -I$(top_builddir)/src/udev/gudev
 
 GTKDOC_LIBS = \
         $(GLIB_LIBS) \
diff --git a/src/udev/src/gudev/docs/gudev-docs.xml b/src/udev/gudev/docs/gudev-docs.xml
index f876c3bc0..f876c3bc0 100644
--- a/src/udev/src/gudev/docs/gudev-docs.xml
+++ b/src/udev/gudev/docs/gudev-docs.xml
diff --git a/src/udev/src/gudev/docs/gudev-sections.txt b/src/udev/gudev/docs/gudev-sections.txt
index 213e1a746..213e1a746 100644
--- a/src/udev/src/gudev/docs/gudev-sections.txt
+++ b/src/udev/gudev/docs/gudev-sections.txt
diff --git a/src/udev/src/gudev/docs/gudev.types b/src/udev/gudev/docs/gudev.types
index a89857a04..a89857a04 100644
--- a/src/udev/src/gudev/docs/gudev.types
+++ b/src/udev/gudev/docs/gudev.types
diff --git a/src/udev/src/gudev/docs/version.xml.in b/src/udev/gudev/docs/version.xml.in
index d78bda934..d78bda934 100644
--- a/src/udev/src/gudev/docs/version.xml.in
+++ b/src/udev/gudev/docs/version.xml.in
diff --git a/src/udev/src/gudev/gjs-example.js b/src/udev/gudev/gjs-example.js
index 5586fd6a6..5586fd6a6 100755
--- a/src/udev/src/gudev/gjs-example.js
+++ b/src/udev/gudev/gjs-example.js
diff --git a/src/udev/src/gudev/gudev-1.0.pc.in b/src/udev/gudev/gudev-1.0.pc.in
index 058262d76..058262d76 100644
--- a/src/udev/src/gudev/gudev-1.0.pc.in
+++ b/src/udev/gudev/gudev-1.0.pc.in
diff --git a/src/udev/src/gudev/gudev.h b/src/udev/gudev/gudev.h
index a31346081..a31346081 100644
--- a/src/udev/src/gudev/gudev.h
+++ b/src/udev/gudev/gudev.h
diff --git a/src/udev/src/gudev/gudevclient.c b/src/udev/gudev/gudevclient.c
index 2b94102ac..2b94102ac 100644
--- a/src/udev/src/gudev/gudevclient.c
+++ b/src/udev/gudev/gudevclient.c
diff --git a/src/udev/src/gudev/gudevclient.h b/src/udev/gudev/gudevclient.h
index b425d03d4..b425d03d4 100644
--- a/src/udev/src/gudev/gudevclient.h
+++ b/src/udev/gudev/gudevclient.h
diff --git a/src/udev/src/gudev/gudevdevice.c b/src/udev/gudev/gudevdevice.c
index 62a26f99b..62a26f99b 100644
--- a/src/udev/src/gudev/gudevdevice.c
+++ b/src/udev/gudev/gudevdevice.c
diff --git a/src/udev/src/gudev/gudevdevice.h b/src/udev/gudev/gudevdevice.h
index d4873bad0..d4873bad0 100644
--- a/src/udev/src/gudev/gudevdevice.h
+++ b/src/udev/gudev/gudevdevice.h
diff --git a/src/udev/src/gudev/gudevenumerator.c b/src/udev/gudev/gudevenumerator.c
index db0907462..db0907462 100644
--- a/src/udev/src/gudev/gudevenumerator.c
+++ b/src/udev/gudev/gudevenumerator.c
diff --git a/src/udev/src/gudev/gudevenumerator.h b/src/udev/gudev/gudevenumerator.h
index 3fddccf57..3fddccf57 100644
--- a/src/udev/src/gudev/gudevenumerator.h
+++ b/src/udev/gudev/gudevenumerator.h
diff --git a/src/udev/src/gudev/gudevenums.h b/src/udev/gudev/gudevenums.h
index c3a0aa874..c3a0aa874 100644
--- a/src/udev/src/gudev/gudevenums.h
+++ b/src/udev/gudev/gudevenums.h
diff --git a/src/udev/src/gudev/gudevenumtypes.c.template b/src/udev/gudev/gudevenumtypes.c.template
index fc30b39e2..fc30b39e2 100644
--- a/src/udev/src/gudev/gudevenumtypes.c.template
+++ b/src/udev/gudev/gudevenumtypes.c.template
diff --git a/src/udev/src/gudev/gudevenumtypes.h.template b/src/udev/gudev/gudevenumtypes.h.template
index d0ab3393e..d0ab3393e 100644
--- a/src/udev/src/gudev/gudevenumtypes.h.template
+++ b/src/udev/gudev/gudevenumtypes.h.template
diff --git a/src/udev/src/gudev/gudevmarshal.list b/src/udev/gudev/gudevmarshal.list
index 7e665999e..7e665999e 100644
--- a/src/udev/src/gudev/gudevmarshal.list
+++ b/src/udev/gudev/gudevmarshal.list
diff --git a/src/udev/src/gudev/gudevprivate.h b/src/udev/gudev/gudevprivate.h
index 8866f52b8..8866f52b8 100644
--- a/src/udev/src/gudev/gudevprivate.h
+++ b/src/udev/gudev/gudevprivate.h
diff --git a/src/udev/src/gudev/gudevtypes.h b/src/udev/gudev/gudevtypes.h
index 888482783..888482783 100644
--- a/src/udev/src/gudev/gudevtypes.h
+++ b/src/udev/gudev/gudevtypes.h
diff --git a/src/udev/src/gudev/seed-example-enum.js b/src/udev/gudev/seed-example-enum.js
index 66206ad80..66206ad80 100755
--- a/src/udev/src/gudev/seed-example-enum.js
+++ b/src/udev/gudev/seed-example-enum.js
diff --git a/src/udev/src/gudev/seed-example.js b/src/udev/gudev/seed-example.js
index e2ac324d2..e2ac324d2 100755
--- a/src/udev/src/gudev/seed-example.js
+++ b/src/udev/gudev/seed-example.js
diff --git a/src/udev/src/keymap/.gitignore b/src/udev/keymap/.gitignore
index 4567584f4..4567584f4 100644
--- a/src/udev/src/keymap/.gitignore
+++ b/src/udev/keymap/.gitignore
diff --git a/src/udev/src/keymap/95-keyboard-force-release.rules b/src/udev/keymap/95-keyboard-force-release.rules
index 03d56e8aa..03d56e8aa 100644
--- a/src/udev/src/keymap/95-keyboard-force-release.rules
+++ b/src/udev/keymap/95-keyboard-force-release.rules
diff --git a/src/udev/src/keymap/95-keymap.rules b/src/udev/keymap/95-keymap.rules
index bbf311a17..bbf311a17 100644
--- a/src/udev/src/keymap/95-keymap.rules
+++ b/src/udev/keymap/95-keymap.rules
diff --git a/src/udev/src/keymap/README.keymap.txt b/src/udev/keymap/README.keymap.txt
index 52d50ed2d..52d50ed2d 100644
--- a/src/udev/src/keymap/README.keymap.txt
+++ b/src/udev/keymap/README.keymap.txt
diff --git a/src/udev/src/keymap/check-keymaps.sh b/src/udev/keymap/check-keymaps.sh
index 405168c66..405168c66 100755
--- a/src/udev/src/keymap/check-keymaps.sh
+++ b/src/udev/keymap/check-keymaps.sh
diff --git a/src/udev/src/keymap/findkeyboards b/src/udev/keymap/findkeyboards
index 9ce27429b..9ce27429b 100755
--- a/src/udev/src/keymap/findkeyboards
+++ b/src/udev/keymap/findkeyboards
diff --git a/src/udev/src/keymap/force-release-maps/common-volume-keys b/src/udev/keymap/force-release-maps/common-volume-keys
index 3a7654d73..3a7654d73 100644
--- a/src/udev/src/keymap/force-release-maps/common-volume-keys
+++ b/src/udev/keymap/force-release-maps/common-volume-keys
diff --git a/src/udev/src/keymap/force-release-maps/dell-touchpad b/src/udev/keymap/force-release-maps/dell-touchpad
index 18e9bdee6..18e9bdee6 100644
--- a/src/udev/src/keymap/force-release-maps/dell-touchpad
+++ b/src/udev/keymap/force-release-maps/dell-touchpad
diff --git a/src/udev/src/keymap/force-release-maps/hp-other b/src/udev/keymap/force-release-maps/hp-other
index 662137009..662137009 100644
--- a/src/udev/src/keymap/force-release-maps/hp-other
+++ b/src/udev/keymap/force-release-maps/hp-other
diff --git a/src/udev/src/keymap/force-release-maps/samsung-90x3a b/src/udev/keymap/force-release-maps/samsung-90x3a
index 65707effb..65707effb 100644
--- a/src/udev/src/keymap/force-release-maps/samsung-90x3a
+++ b/src/udev/keymap/force-release-maps/samsung-90x3a
diff --git a/src/udev/src/keymap/force-release-maps/samsung-other b/src/udev/keymap/force-release-maps/samsung-other
index c51123a0b..c51123a0b 100644
--- a/src/udev/src/keymap/force-release-maps/samsung-other
+++ b/src/udev/keymap/force-release-maps/samsung-other
diff --git a/src/udev/src/keymap/keyboard-force-release.sh.in b/src/udev/keymap/keyboard-force-release.sh.in
index dd040cebc..dd040cebc 100755
--- a/src/udev/src/keymap/keyboard-force-release.sh.in
+++ b/src/udev/keymap/keyboard-force-release.sh.in
diff --git a/src/udev/src/keymap/keymap.c b/src/udev/keymap/keymap.c
index 92ec67b3a..4c30ccf31 100644
--- a/src/udev/src/keymap/keymap.c
+++ b/src/udev/keymap/keymap.c
@@ -423,7 +423,7 @@ int main(int argc, char **argv)
                         if (f) {
                                 merge_table(fd, f);
                         } else {
-                                snprintf(keymap_path, sizeof(keymap_path), "%s%s", PKGLIBEXECDIR "/keymaps/", filearg);
+                                snprintf(keymap_path, sizeof(keymap_path), "%s%s", UDEVLIBEXECDIR "/keymaps/", filearg);
                                 f = fopen(keymap_path, "r");
                                 if (f)
                                         merge_table(fd, f);
diff --git a/src/udev/src/keymap/keymaps/acer b/src/udev/keymap/keymaps/acer
index 4e7c297de..4e7c297de 100644
--- a/src/udev/src/keymap/keymaps/acer
+++ b/src/udev/keymap/keymaps/acer
diff --git a/src/udev/src/keymap/keymaps/acer-aspire_5720 b/src/udev/keymap/keymaps/acer-aspire_5720
index 1496d63a5..1496d63a5 100644
--- a/src/udev/src/keymap/keymaps/acer-aspire_5720
+++ b/src/udev/keymap/keymaps/acer-aspire_5720
diff --git a/src/udev/src/keymap/keymaps/acer-aspire_5920g b/src/udev/keymap/keymaps/acer-aspire_5920g
index 633c4e854..633c4e854 100644
--- a/src/udev/src/keymap/keymaps/acer-aspire_5920g
+++ b/src/udev/keymap/keymaps/acer-aspire_5920g
diff --git a/src/udev/src/keymap/keymaps/acer-aspire_6920 b/src/udev/keymap/keymaps/acer-aspire_6920
index 699c954b4..699c954b4 100644
--- a/src/udev/src/keymap/keymaps/acer-aspire_6920
+++ b/src/udev/keymap/keymaps/acer-aspire_6920
diff --git a/src/udev/src/keymap/keymaps/acer-aspire_8930 b/src/udev/keymap/keymaps/acer-aspire_8930
index fb27bfb4f..fb27bfb4f 100644
--- a/src/udev/src/keymap/keymaps/acer-aspire_8930
+++ b/src/udev/keymap/keymaps/acer-aspire_8930
diff --git a/src/udev/src/keymap/keymaps/acer-travelmate_c300 b/src/udev/keymap/keymaps/acer-travelmate_c300
index bfef4cf86..bfef4cf86 100644
--- a/src/udev/src/keymap/keymaps/acer-travelmate_c300
+++ b/src/udev/keymap/keymaps/acer-travelmate_c300
diff --git a/src/udev/src/keymap/keymaps/asus b/src/udev/keymap/keymaps/asus
index 2a5995f98..2a5995f98 100644
--- a/src/udev/src/keymap/keymaps/asus
+++ b/src/udev/keymap/keymaps/asus
diff --git a/src/udev/src/keymap/keymaps/compaq-e_evo b/src/udev/keymap/keymaps/compaq-e_evo
index 5fbc573aa..5fbc573aa 100644
--- a/src/udev/src/keymap/keymaps/compaq-e_evo
+++ b/src/udev/keymap/keymaps/compaq-e_evo
diff --git a/src/udev/src/keymap/keymaps/dell b/src/udev/keymap/keymaps/dell
index 4f907b3ee..4f907b3ee 100644
--- a/src/udev/src/keymap/keymaps/dell
+++ b/src/udev/keymap/keymaps/dell
diff --git a/src/udev/src/keymap/keymaps/dell-latitude-xt2 b/src/udev/keymap/keymaps/dell-latitude-xt2
index 39872f559..39872f559 100644
--- a/src/udev/src/keymap/keymaps/dell-latitude-xt2
+++ b/src/udev/keymap/keymaps/dell-latitude-xt2
diff --git a/src/udev/src/keymap/keymaps/everex-xt5000 b/src/udev/keymap/keymaps/everex-xt5000
index 4823a832f..4823a832f 100644
--- a/src/udev/src/keymap/keymaps/everex-xt5000
+++ b/src/udev/keymap/keymaps/everex-xt5000
diff --git a/src/udev/src/keymap/keymaps/fujitsu-amilo_li_2732 b/src/udev/keymap/keymaps/fujitsu-amilo_li_2732
index 9b8b36a17..9b8b36a17 100644
--- a/src/udev/src/keymap/keymaps/fujitsu-amilo_li_2732
+++ b/src/udev/keymap/keymaps/fujitsu-amilo_li_2732
diff --git a/src/udev/src/keymap/keymaps/fujitsu-amilo_pa_2548 b/src/udev/keymap/keymaps/fujitsu-amilo_pa_2548
index f7b0c5244..f7b0c5244 100644
--- a/src/udev/src/keymap/keymaps/fujitsu-amilo_pa_2548
+++ b/src/udev/keymap/keymaps/fujitsu-amilo_pa_2548
diff --git a/src/udev/src/keymap/keymaps/fujitsu-amilo_pro_edition_v3505 b/src/udev/keymap/keymaps/fujitsu-amilo_pro_edition_v3505
index d2e38cbb2..d2e38cbb2 100644
--- a/src/udev/src/keymap/keymaps/fujitsu-amilo_pro_edition_v3505
+++ b/src/udev/keymap/keymaps/fujitsu-amilo_pro_edition_v3505
diff --git a/src/udev/src/keymap/keymaps/fujitsu-amilo_pro_v3205 b/src/udev/keymap/keymaps/fujitsu-amilo_pro_v3205
index 43e3199d5..43e3199d5 100644
--- a/src/udev/src/keymap/keymaps/fujitsu-amilo_pro_v3205
+++ b/src/udev/keymap/keymaps/fujitsu-amilo_pro_v3205
diff --git a/src/udev/src/keymap/keymaps/fujitsu-amilo_si_1520 b/src/udev/keymap/keymaps/fujitsu-amilo_si_1520
index 1419bd9b5..1419bd9b5 100644
--- a/src/udev/src/keymap/keymaps/fujitsu-amilo_si_1520
+++ b/src/udev/keymap/keymaps/fujitsu-amilo_si_1520
diff --git a/src/udev/src/keymap/keymaps/fujitsu-esprimo_mobile_v5 b/src/udev/keymap/keymaps/fujitsu-esprimo_mobile_v5
index d3d056b36..d3d056b36 100644
--- a/src/udev/src/keymap/keymaps/fujitsu-esprimo_mobile_v5
+++ b/src/udev/keymap/keymaps/fujitsu-esprimo_mobile_v5
diff --git a/src/udev/src/keymap/keymaps/fujitsu-esprimo_mobile_v6 b/src/udev/keymap/keymaps/fujitsu-esprimo_mobile_v6
index 52c70c50c..52c70c50c 100644
--- a/src/udev/src/keymap/keymaps/fujitsu-esprimo_mobile_v6
+++ b/src/udev/keymap/keymaps/fujitsu-esprimo_mobile_v6
diff --git a/src/udev/src/keymap/keymaps/genius-slimstar-320 b/src/udev/keymap/keymaps/genius-slimstar-320
index d0a3656dd..d0a3656dd 100644
--- a/src/udev/src/keymap/keymaps/genius-slimstar-320
+++ b/src/udev/keymap/keymaps/genius-slimstar-320
diff --git a/src/udev/src/keymap/keymaps/hewlett-packard b/src/udev/keymap/keymaps/hewlett-packard
index 4461fa2ce..4461fa2ce 100644
--- a/src/udev/src/keymap/keymaps/hewlett-packard
+++ b/src/udev/keymap/keymaps/hewlett-packard
diff --git a/src/udev/src/keymap/keymaps/hewlett-packard-2510p_2530p b/src/udev/keymap/keymaps/hewlett-packard-2510p_2530p
index 41ad2e9b5..41ad2e9b5 100644
--- a/src/udev/src/keymap/keymaps/hewlett-packard-2510p_2530p
+++ b/src/udev/keymap/keymaps/hewlett-packard-2510p_2530p
diff --git a/src/udev/src/keymap/keymaps/hewlett-packard-compaq_elitebook b/src/udev/keymap/keymaps/hewlett-packard-compaq_elitebook
index 42007c548..42007c548 100644
--- a/src/udev/src/keymap/keymaps/hewlett-packard-compaq_elitebook
+++ b/src/udev/keymap/keymaps/hewlett-packard-compaq_elitebook
diff --git a/src/udev/src/keymap/keymaps/hewlett-packard-pavilion b/src/udev/keymap/keymaps/hewlett-packard-pavilion
index 3d3cefc8e..3d3cefc8e 100644
--- a/src/udev/src/keymap/keymaps/hewlett-packard-pavilion
+++ b/src/udev/keymap/keymaps/hewlett-packard-pavilion
diff --git a/src/udev/src/keymap/keymaps/hewlett-packard-presario-2100 b/src/udev/keymap/keymaps/hewlett-packard-presario-2100
index 1df39dcbd..1df39dcbd 100644
--- a/src/udev/src/keymap/keymaps/hewlett-packard-presario-2100
+++ b/src/udev/keymap/keymaps/hewlett-packard-presario-2100
diff --git a/src/udev/src/keymap/keymaps/hewlett-packard-tablet b/src/udev/keymap/keymaps/hewlett-packard-tablet
index d19005ab9..d19005ab9 100644
--- a/src/udev/src/keymap/keymaps/hewlett-packard-tablet
+++ b/src/udev/keymap/keymaps/hewlett-packard-tablet
diff --git a/src/udev/src/keymap/keymaps/hewlett-packard-tx2 b/src/udev/keymap/keymaps/hewlett-packard-tx2
index 36a690fcf..36a690fcf 100644
--- a/src/udev/src/keymap/keymaps/hewlett-packard-tx2
+++ b/src/udev/keymap/keymaps/hewlett-packard-tx2
diff --git a/src/udev/src/keymap/keymaps/ibm-thinkpad-usb-keyboard-trackpoint b/src/udev/keymap/keymaps/ibm-thinkpad-usb-keyboard-trackpoint
index 027e50bf8..027e50bf8 100644
--- a/src/udev/src/keymap/keymaps/ibm-thinkpad-usb-keyboard-trackpoint
+++ b/src/udev/keymap/keymaps/ibm-thinkpad-usb-keyboard-trackpoint
diff --git a/src/udev/src/keymap/keymaps/inventec-symphony_6.0_7.0 b/src/udev/keymap/keymaps/inventec-symphony_6.0_7.0
index 4a8b4ba5a..4a8b4ba5a 100644
--- a/src/udev/src/keymap/keymaps/inventec-symphony_6.0_7.0
+++ b/src/udev/keymap/keymaps/inventec-symphony_6.0_7.0
diff --git a/src/udev/src/keymap/keymaps/lenovo-3000 b/src/udev/keymap/keymaps/lenovo-3000
index 5bd165654..5bd165654 100644
--- a/src/udev/src/keymap/keymaps/lenovo-3000
+++ b/src/udev/keymap/keymaps/lenovo-3000
diff --git a/src/udev/src/keymap/keymaps/lenovo-ideapad b/src/udev/keymap/keymaps/lenovo-ideapad
index fc339839f..fc339839f 100644
--- a/src/udev/src/keymap/keymaps/lenovo-ideapad
+++ b/src/udev/keymap/keymaps/lenovo-ideapad
diff --git a/src/udev/src/keymap/keymaps/lenovo-thinkpad-usb-keyboard-trackpoint b/src/udev/keymap/keymaps/lenovo-thinkpad-usb-keyboard-trackpoint
index 47e8846a6..47e8846a6 100644
--- a/src/udev/src/keymap/keymaps/lenovo-thinkpad-usb-keyboard-trackpoint
+++ b/src/udev/keymap/keymaps/lenovo-thinkpad-usb-keyboard-trackpoint
diff --git a/src/udev/src/keymap/keymaps/lenovo-thinkpad_x200_tablet b/src/udev/keymap/keymaps/lenovo-thinkpad_x200_tablet
index 31ea3b2c7..31ea3b2c7 100644
--- a/src/udev/src/keymap/keymaps/lenovo-thinkpad_x200_tablet
+++ b/src/udev/keymap/keymaps/lenovo-thinkpad_x200_tablet
diff --git a/src/udev/src/keymap/keymaps/lenovo-thinkpad_x6_tablet b/src/udev/keymap/keymaps/lenovo-thinkpad_x6_tablet
index 6fd16b566..6fd16b566 100644
--- a/src/udev/src/keymap/keymaps/lenovo-thinkpad_x6_tablet
+++ b/src/udev/keymap/keymaps/lenovo-thinkpad_x6_tablet
diff --git a/src/udev/src/keymap/keymaps/lg-x110 b/src/udev/keymap/keymaps/lg-x110
index ba08cba3f..ba08cba3f 100644
--- a/src/udev/src/keymap/keymaps/lg-x110
+++ b/src/udev/keymap/keymaps/lg-x110
diff --git a/src/udev/src/keymap/keymaps/logitech-wave b/src/udev/keymap/keymaps/logitech-wave
index caa5d5d31..caa5d5d31 100644
--- a/src/udev/src/keymap/keymaps/logitech-wave
+++ b/src/udev/keymap/keymaps/logitech-wave
diff --git a/src/udev/src/keymap/keymaps/logitech-wave-cordless b/src/udev/keymap/keymaps/logitech-wave-cordless
index a10dad5e4..a10dad5e4 100644
--- a/src/udev/src/keymap/keymaps/logitech-wave-cordless
+++ b/src/udev/keymap/keymaps/logitech-wave-cordless
diff --git a/src/udev/src/keymap/keymaps/logitech-wave-pro-cordless b/src/udev/keymap/keymaps/logitech-wave-pro-cordless
index e7aa02206..e7aa02206 100644
--- a/src/udev/src/keymap/keymaps/logitech-wave-pro-cordless
+++ b/src/udev/keymap/keymaps/logitech-wave-pro-cordless
diff --git a/src/udev/src/keymap/keymaps/maxdata-pro_7000 b/src/udev/keymap/keymaps/maxdata-pro_7000
index c0e4f77af..c0e4f77af 100644
--- a/src/udev/src/keymap/keymaps/maxdata-pro_7000
+++ b/src/udev/keymap/keymaps/maxdata-pro_7000
diff --git a/src/udev/src/keymap/keymaps/medion-fid2060 b/src/udev/keymap/keymaps/medion-fid2060
index 5a76c7679..5a76c7679 100644
--- a/src/udev/src/keymap/keymaps/medion-fid2060
+++ b/src/udev/keymap/keymaps/medion-fid2060
diff --git a/src/udev/src/keymap/keymaps/medionnb-a555 b/src/udev/keymap/keymaps/medionnb-a555
index c3b5dfa60..c3b5dfa60 100644
--- a/src/udev/src/keymap/keymaps/medionnb-a555
+++ b/src/udev/keymap/keymaps/medionnb-a555
diff --git a/src/udev/src/keymap/keymaps/micro-star b/src/udev/keymap/keymaps/micro-star
index 4a438698e..4a438698e 100644
--- a/src/udev/src/keymap/keymaps/micro-star
+++ b/src/udev/keymap/keymaps/micro-star
diff --git a/src/udev/src/keymap/keymaps/module-asus-w3j b/src/udev/keymap/keymaps/module-asus-w3j
index 773e0b3e8..773e0b3e8 100644
--- a/src/udev/src/keymap/keymaps/module-asus-w3j
+++ b/src/udev/keymap/keymaps/module-asus-w3j
diff --git a/src/udev/src/keymap/keymaps/module-ibm b/src/udev/keymap/keymaps/module-ibm
index a92dfa250..a92dfa250 100644
--- a/src/udev/src/keymap/keymaps/module-ibm
+++ b/src/udev/keymap/keymaps/module-ibm
diff --git a/src/udev/src/keymap/keymaps/module-lenovo b/src/udev/keymap/keymaps/module-lenovo
index 8e3888309..8e3888309 100644
--- a/src/udev/src/keymap/keymaps/module-lenovo
+++ b/src/udev/keymap/keymaps/module-lenovo
diff --git a/src/udev/src/keymap/keymaps/module-sony b/src/udev/keymap/keymaps/module-sony
index 7c000131d..7c000131d 100644
--- a/src/udev/src/keymap/keymaps/module-sony
+++ b/src/udev/keymap/keymaps/module-sony
diff --git a/src/udev/src/keymap/keymaps/module-sony-old b/src/udev/keymap/keymaps/module-sony-old
index 596a34258..596a34258 100644
--- a/src/udev/src/keymap/keymaps/module-sony-old
+++ b/src/udev/keymap/keymaps/module-sony-old
diff --git a/src/udev/src/keymap/keymaps/module-sony-vgn b/src/udev/keymap/keymaps/module-sony-vgn
index c8ba00151..c8ba00151 100644
--- a/src/udev/src/keymap/keymaps/module-sony-vgn
+++ b/src/udev/keymap/keymaps/module-sony-vgn
diff --git a/src/udev/src/keymap/keymaps/olpc-xo b/src/udev/keymap/keymaps/olpc-xo
index 34434a121..34434a121 100644
--- a/src/udev/src/keymap/keymaps/olpc-xo
+++ b/src/udev/keymap/keymaps/olpc-xo
diff --git a/src/udev/src/keymap/keymaps/onkyo b/src/udev/keymap/keymaps/onkyo
index ee864ade4..ee864ade4 100644
--- a/src/udev/src/keymap/keymaps/onkyo
+++ b/src/udev/keymap/keymaps/onkyo
diff --git a/src/udev/src/keymap/keymaps/oqo-model2 b/src/udev/keymap/keymaps/oqo-model2
index b7f4851ab..b7f4851ab 100644
--- a/src/udev/src/keymap/keymaps/oqo-model2
+++ b/src/udev/keymap/keymaps/oqo-model2
diff --git a/src/udev/src/keymap/keymaps/samsung-90x3a b/src/udev/keymap/keymaps/samsung-90x3a
index 8b65eb6d0..8b65eb6d0 100644
--- a/src/udev/src/keymap/keymaps/samsung-90x3a
+++ b/src/udev/keymap/keymaps/samsung-90x3a
diff --git a/src/udev/src/keymap/keymaps/samsung-other b/src/udev/keymap/keymaps/samsung-other
index 3ac0c2f10..3ac0c2f10 100644
--- a/src/udev/src/keymap/keymaps/samsung-other
+++ b/src/udev/keymap/keymaps/samsung-other
diff --git a/src/udev/src/keymap/keymaps/samsung-sq1us b/src/udev/keymap/keymaps/samsung-sq1us
index ea2141ef8..ea2141ef8 100644
--- a/src/udev/src/keymap/keymaps/samsung-sq1us
+++ b/src/udev/keymap/keymaps/samsung-sq1us
diff --git a/src/udev/src/keymap/keymaps/samsung-sx20s b/src/udev/keymap/keymaps/samsung-sx20s
index 9d954ee41..9d954ee41 100644
--- a/src/udev/src/keymap/keymaps/samsung-sx20s
+++ b/src/udev/keymap/keymaps/samsung-sx20s
diff --git a/src/udev/src/keymap/keymaps/toshiba-satellite_a100 b/src/udev/keymap/keymaps/toshiba-satellite_a100
index 22007be71..22007be71 100644
--- a/src/udev/src/keymap/keymaps/toshiba-satellite_a100
+++ b/src/udev/keymap/keymaps/toshiba-satellite_a100
diff --git a/src/udev/src/keymap/keymaps/toshiba-satellite_a110 b/src/udev/keymap/keymaps/toshiba-satellite_a110
index 142940935..142940935 100644
--- a/src/udev/src/keymap/keymaps/toshiba-satellite_a110
+++ b/src/udev/keymap/keymaps/toshiba-satellite_a110
diff --git a/src/udev/src/keymap/keymaps/toshiba-satellite_m30x b/src/udev/keymap/keymaps/toshiba-satellite_m30x
index ae8e34941..ae8e34941 100644
--- a/src/udev/src/keymap/keymaps/toshiba-satellite_m30x
+++ b/src/udev/keymap/keymaps/toshiba-satellite_m30x
diff --git a/src/udev/src/keymap/keymaps/zepto-znote b/src/udev/keymap/keymaps/zepto-znote
index cf72fda47..cf72fda47 100644
--- a/src/udev/src/keymap/keymaps/zepto-znote
+++ b/src/udev/keymap/keymaps/zepto-znote
diff --git a/src/udev/src/libudev-device-private.c b/src/udev/libudev-device-private.c
index 13fdb8eb5..13fdb8eb5 100644
--- a/src/udev/src/libudev-device-private.c
+++ b/src/udev/libudev-device-private.c
diff --git a/src/udev/src/libudev-device.c b/src/udev/libudev-device.c
index 10f28b8cd..10f28b8cd 100644
--- a/src/udev/src/libudev-device.c
+++ b/src/udev/libudev-device.c
diff --git a/src/udev/src/libudev-enumerate.c b/src/udev/libudev-enumerate.c
index 034d96feb..034d96feb 100644
--- a/src/udev/src/libudev-enumerate.c
+++ b/src/udev/libudev-enumerate.c
diff --git a/src/udev/src/libudev-list.c b/src/udev/libudev-list.c
index 4bdef35ae..4bdef35ae 100644
--- a/src/udev/src/libudev-list.c
+++ b/src/udev/libudev-list.c
diff --git a/src/udev/src/libudev-monitor.c b/src/udev/libudev-monitor.c
index 77dc55572..77dc55572 100644
--- a/src/udev/src/libudev-monitor.c
+++ b/src/udev/libudev-monitor.c
diff --git a/src/udev/src/libudev-private.h b/src/udev/libudev-private.h
index 5f5c64a63..4bbd8422f 100644
--- a/src/udev/src/libudev-private.h
+++ b/src/udev/libudev-private.h
@@ -194,7 +194,7 @@ unsigned long long ts_usec(const struct timespec *ts);
 unsigned long long now_usec(void);
 
 /* libudev-selinux-private.c */
-#ifndef WITH_SELINUX
+#ifndef HAVE_SELINUX
 static inline void udev_selinux_init(struct udev *udev) {}
 static inline void udev_selinux_exit(struct udev *udev) {}
 static inline void udev_selinux_lsetfilecon(struct udev *udev, const char *file, unsigned int mode) {}
diff --git a/src/udev/src/libudev-queue-private.c b/src/udev/libudev-queue-private.c
index 71771950a..71771950a 100644
--- a/src/udev/src/libudev-queue-private.c
+++ b/src/udev/libudev-queue-private.c
diff --git a/src/udev/src/libudev-queue.c b/src/udev/libudev-queue.c
index 0e82cb6ae..0e82cb6ae 100644
--- a/src/udev/src/libudev-queue.c
+++ b/src/udev/libudev-queue.c
diff --git a/src/udev/src/libudev-selinux-private.c b/src/udev/libudev-selinux-private.c
index 0f2a617b1..0f2a617b1 100644
--- a/src/udev/src/libudev-selinux-private.c
+++ b/src/udev/libudev-selinux-private.c
diff --git a/src/udev/src/libudev-util-private.c b/src/udev/libudev-util-private.c
index 08f0ba222..08f0ba222 100644
--- a/src/udev/src/libudev-util-private.c
+++ b/src/udev/libudev-util-private.c
diff --git a/src/udev/src/libudev-util.c b/src/udev/libudev-util.c
index 7e345f0fb..7e345f0fb 100644
--- a/src/udev/src/libudev-util.c
+++ b/src/udev/libudev-util.c
diff --git a/src/udev/src/libudev.c b/src/udev/libudev.c
index d954daef6..dcba15de4 100644
--- a/src/udev/src/libudev.c
+++ b/src/udev/libudev.c
@@ -256,7 +256,7 @@ UDEV_EXPORT struct udev *udev_new(void)
 
         if (udev->rules_path[0] == NULL) {
                 /* /usr/lib/udev -- system rules */
-                udev->rules_path[0] = strdup(PKGLIBEXECDIR "/rules.d");
+                udev->rules_path[0] = strdup(UDEVLIBEXECDIR "/rules.d");
                 if (!udev->rules_path[0])
                         goto err;
 
diff --git a/src/udev/src/libudev.h b/src/udev/libudev.h
index 10e098d4f..10e098d4f 100644
--- a/src/udev/src/libudev.h
+++ b/src/udev/libudev.h
diff --git a/src/udev/src/libudev.pc.in b/src/udev/libudev.pc.in
index c9a47fc9b..c9a47fc9b 100644
--- a/src/udev/src/libudev.pc.in
+++ b/src/udev/libudev.pc.in
diff --git a/src/udev/m4/.gitignore b/src/udev/m4/.gitignore
deleted file mode 100644
index 0ca2c0372..000000000
--- a/src/udev/m4/.gitignore
+++ /dev/null
@@ -1,4 +0,0 @@
-libtool.m4
-lt*m4
-gtk-doc.m4
-
diff --git a/src/udev/src/mtd_probe/75-probe_mtd.rules b/src/udev/mtd_probe/75-probe_mtd.rules
index c0e083978..c0e083978 100644
--- a/src/udev/src/mtd_probe/75-probe_mtd.rules
+++ b/src/udev/mtd_probe/75-probe_mtd.rules
diff --git a/src/udev/src/mtd_probe/mtd_probe.c b/src/udev/mtd_probe/mtd_probe.c
index 1aa08d385..1aa08d385 100644
--- a/src/udev/src/mtd_probe/mtd_probe.c
+++ b/src/udev/mtd_probe/mtd_probe.c
diff --git a/src/udev/src/mtd_probe/mtd_probe.h b/src/udev/mtd_probe/mtd_probe.h
index 2a37ede57..2a37ede57 100644
--- a/src/udev/src/mtd_probe/mtd_probe.h
+++ b/src/udev/mtd_probe/mtd_probe.h
diff --git a/src/udev/src/mtd_probe/probe_smartmedia.c b/src/udev/mtd_probe/probe_smartmedia.c
index b3cdefc63..b3cdefc63 100644
--- a/src/udev/src/mtd_probe/probe_smartmedia.c
+++ b/src/udev/mtd_probe/probe_smartmedia.c
diff --git a/src/udev/rules/42-usb-hid-pm.rules b/src/udev/rules/42-usb-hid-pm.rules
deleted file mode 100644
index d5d5897c3..000000000
--- a/src/udev/rules/42-usb-hid-pm.rules
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# Enable autosuspend for qemu emulated usb hid devices.
-#
-# Note that there are buggy qemu versions which advertise remote
-# wakeup support but don't actually implement it correctly.  This
-# is the reason why we need a match for the serial number here.
-# The serial number "42" is used to tag the implementations where
-# remote wakeup is working.
-#
-
-ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Mouse", ATTR{serial}=="42", TEST=="power/control", ATTR{power/control}="auto"
-ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Tablet", ATTR{serial}=="42", TEST=="power/control", ATTR{power/control}="auto"
-ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Keyboard", ATTR{serial}=="42", TEST=="power/control", ATTR{power/control}="auto"
-
-#
-# Enable autosuspend for KVM and iLO usb hid devices. These are
-# effectively self-powered (despite what some claim in their USB
-# profiles) and so it's safe to do so.
-#
-
-# AMI 046b:ff10
-ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="046b", ATTR{idProduct}=="ff10", TEST=="power/control", ATTR{power/control}="auto"
-
-#
-# Catch-all for Avocent HID devices. Keyed off interface in order to only
-# trigger on HID class devices.
-#
-ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="0624", ATTR{bInterfaceClass}=="03", TEST=="../power/control", ATTR{../power/control}="auto"
-
-# Dell DRAC 4
-ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="413c", ATTR{idProduct}=="2500", TEST=="power/control", ATTR{power/control}="auto"
-
-# Dell DRAC 5
-ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="413c", ATTR{idProduct}=="0000", TEST=="power/control", ATTR{power/control}="auto"
-
-# Hewlett Packard iLO
-ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="03f0", ATTR{idProduct}=="7029", TEST=="power/control", ATTR{power/control}="auto"
-ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="03f0", ATTR{idProduct}=="1027", TEST=="power/control", ATTR{power/control}="auto"
-
-# IBM remote access
-ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="04b3", ATTR{idProduct}=="4001", TEST=="power/control", ATTR{power/control}="auto"
-ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="04b3", ATTR{idProduct}=="4002", TEST=="power/control", ATTR{power/control}="auto"
-ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="04b3", ATTR{idProduct}=="4012", TEST=="power/control", ATTR{power/control}="auto"
-
-# Raritan Computer, Inc KVM.
-ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="14dd", ATTR{idProduct}="0002", TEST=="power/control", ATTR{power/control}="auto"
-
-# USB HID devices that are internal to the machine should also be safe to autosuspend
-ACTION=="add", SUBSYSTEM=="usb", ATTR{bInterfaceClass}=="03", ATTRS{removable}=="fixed", TEST=="../power/control", ATTR{../power/control}="auto"
diff --git a/src/udev/rules/50-udev-default.rules b/src/udev/rules/50-udev-default.rules
deleted file mode 100644
index 5ad787fc7..000000000
--- a/src/udev/rules/50-udev-default.rules
+++ /dev/null
@@ -1,107 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", GROUP="tty", MODE="0660"
-KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", GROUP="tty", MODE="0660"
-KERNEL=="ptmx", GROUP="tty", MODE="0666"
-KERNEL=="tty", GROUP="tty", MODE="0666"
-KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620"
-KERNEL=="vcs|vcs[0-9]*|vcsa|vcsa[0-9]*", GROUP="tty"
-
-# serial
-KERNEL=="tty[A-Z]*[0-9]|pppox[0-9]*|ircomm[0-9]*|noz[0-9]*|rfcomm[0-9]*", GROUP="dialout"
-KERNEL=="mwave", GROUP="dialout"
-KERNEL=="hvc*|hvsi*", GROUP="dialout"
-
-# virtio serial / console ports
-KERNEL=="vport*", ATTR{name}=="?*", SYMLINK+="virtio-ports/$attr{name}"
-
-# mem
-KERNEL=="null|zero|full|random|urandom", MODE="0666"
-KERNEL=="mem|kmem|port|nvram", GROUP="kmem", MODE="0640"
-
-# input
-SUBSYSTEM=="input", ENV{ID_INPUT}=="", IMPORT{builtin}="input_id"
-KERNEL=="mouse*|mice|event*", MODE="0640"
-KERNEL=="ts[0-9]*|uinput", MODE="0640"
-KERNEL=="js[0-9]*", MODE="0644"
-
-# video4linux
-SUBSYSTEM=="video4linux", GROUP="video"
-KERNEL=="vttuner*", GROUP="video"
-KERNEL=="vtx*|vbi*", GROUP="video"
-KERNEL=="winradio*", GROUP="video"
-
-# graphics
-KERNEL=="agpgart", GROUP="video"
-KERNEL=="pmu", GROUP="video"
-KERNEL=="nvidia*|nvidiactl*", GROUP="video"
-SUBSYSTEM=="graphics", GROUP="video"
-SUBSYSTEM=="drm", GROUP="video"
-
-# sound
-SUBSYSTEM=="sound", GROUP="audio", \
-  OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer"
-
-# DVB (video)
-SUBSYSTEM=="dvb", GROUP="video"
-
-# FireWire (firewire-core driver: IIDC devices, AV/C devices)
-SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", GROUP="video"
-SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", GROUP="video"
-SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video"
-SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", GROUP="video"
-
-# 'libusb' device nodes
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id"
-
-# printer
-KERNEL=="parport[0-9]*", GROUP="lp"
-SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp"
-SUBSYSTEM=="ppdev", GROUP="lp"
-KERNEL=="lp[0-9]*", GROUP="lp"
-KERNEL=="irlpt[0-9]*", GROUP="lp"
-SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
-
-# block
-SUBSYSTEM=="block", GROUP="disk"
-
-# floppy
-SUBSYSTEM=="block", KERNEL=="fd[0-9]", GROUP="floppy"
-
-# cdrom
-SUBSYSTEM=="block", KERNEL=="sr[0-9]*", GROUP="cdrom"
-SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom"
-KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
-KERNEL=="pktcdvd", GROUP="cdrom"
-
-# tape
-KERNEL=="ht[0-9]*|nht[0-9]*", GROUP="tape"
-KERNEL=="pt[0-9]*|npt[0-9]*|pht[0-9]*", GROUP="tape"
-SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape"
-
-# block-related
-KERNEL=="sch[0-9]*", GROUP="disk"
-SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk"
-KERNEL=="pg[0-9]*", GROUP="disk"
-KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk"
-KERNEL=="rawctl", GROUP="disk"
-SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", GROUP="disk"
-SUBSYSTEM=="aoe", GROUP="disk", MODE="0220"
-SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"
-
-# network
-KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun"
-KERNEL=="rfkill", MODE="0644"
-
-# CPU
-KERNEL=="cpu[0-9]*", MODE="0444"
-
-KERNEL=="fuse", ACTION=="add", MODE="0666", OPTIONS+="static_node=fuse"
-
-SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc"
-KERNEL=="mmtimer", MODE="0644"
-KERNEL=="rflash[0-9]*", MODE="0400"
-KERNEL=="rrom[0-9]*", MODE="0400"
-
-SUBSYSTEM=="firmware", ACTION=="add", IMPORT{builtin}="firmware"
diff --git a/src/udev/rules/60-persistent-alsa.rules b/src/udev/rules/60-persistent-alsa.rules
deleted file mode 100644
index 8154e2dbb..000000000
--- a/src/udev/rules/60-persistent-alsa.rules
+++ /dev/null
@@ -1,14 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="persistent_alsa_end"
-SUBSYSTEM!="sound", GOTO="persistent_alsa_end"
-KERNEL!="controlC[0-9]*", GOTO="persistent_alsa_end"
-
-SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id"
-ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}"
-ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-
-IMPORT{builtin}="path_id"
-ENV{ID_PATH}=="?*", SYMLINK+="snd/by-path/$env{ID_PATH}"
-
-LABEL="persistent_alsa_end"
diff --git a/src/udev/rules/60-persistent-input.rules b/src/udev/rules/60-persistent-input.rules
deleted file mode 100644
index fb798ddb0..000000000
--- a/src/udev/rules/60-persistent-input.rules
+++ /dev/null
@@ -1,38 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="persistent_input_end"
-SUBSYSTEM!="input", GOTO="persistent_input_end"
-SUBSYSTEMS=="bluetooth", GOTO="persistent_input_end"
-
-SUBSYSTEMS=="usb", ENV{ID_BUS}=="", IMPORT{builtin}="usb_id"
-
-# determine class name for persistent symlinks
-ENV{ID_INPUT_KEYBOARD}=="?*", ENV{.INPUT_CLASS}="kbd"
-ENV{ID_INPUT_MOUSE}=="?*", ENV{.INPUT_CLASS}="mouse"
-ENV{ID_INPUT_TOUCHPAD}=="?*", ENV{.INPUT_CLASS}="mouse"
-ENV{ID_INPUT_TABLET}=="?*", ENV{.INPUT_CLASS}="mouse"
-ENV{ID_INPUT_JOYSTICK}=="?*", ENV{.INPUT_CLASS}="joystick"
-DRIVERS=="pcspkr", ENV{.INPUT_CLASS}="spkr"
-ATTRS{name}=="*dvb*|*DVB*|* IR *", ENV{.INPUT_CLASS}="ir"
-
-# fill empty serial number
-ENV{.INPUT_CLASS}=="?*", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial"
-
-# by-id links
-KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{.INPUT_CLASS}"
-KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-$env{.INPUT_CLASS}"
-KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{.INPUT_CLASS}"
-KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-event-$env{.INPUT_CLASS}"
-# allow empty class for USB devices, by appending the interface number
-SUBSYSTEMS=="usb", ENV{ID_BUS}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", ATTRS{bInterfaceNumber}=="?*", \
-  SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-if$attr{bInterfaceNumber}"
-
-# by-path
-SUBSYSTEMS=="pci|usb|platform|acpi", IMPORT{builtin}="path_id"
-ENV{ID_PATH}=="?*", KERNEL=="mouse*|js*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-$env{.INPUT_CLASS}"
-ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{.INPUT_CLASS}"
-# allow empty class for platform and usb devices; platform supports only a single interface that way
-SUBSYSTEMS=="usb|platform", ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", \
-  SYMLINK+="input/by-path/$env{ID_PATH}-event"
-
-LABEL="persistent_input_end"
diff --git a/src/udev/rules/60-persistent-serial.rules b/src/udev/rules/60-persistent-serial.rules
deleted file mode 100644
index 2948200c5..000000000
--- a/src/udev/rules/60-persistent-serial.rules
+++ /dev/null
@@ -1,20 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="persistent_serial_end"
-SUBSYSTEM!="tty", GOTO="persistent_serial_end"
-KERNEL!="ttyUSB[0-9]*|ttyACM[0-9]*", GOTO="persistent_serial_end"
-
-SUBSYSTEMS=="usb-serial", ENV{.ID_PORT}="$attr{port_number}"
-
-IMPORT{builtin}="path_id"
-ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="", SYMLINK+="serial/by-path/$env{ID_PATH}"
-ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-path/$env{ID_PATH}-port$env{.ID_PORT}"
-
-IMPORT{builtin}="usb_id"
-ENV{ID_SERIAL}=="", GOTO="persistent_serial_end"
-SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACE_NUM}="$attr{bInterfaceNumber}"
-ENV{ID_USB_INTERFACE_NUM}=="", GOTO="persistent_serial_end"
-ENV{.ID_PORT}=="", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}"
-ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}-port$env{.ID_PORT}"
-
-LABEL="persistent_serial_end"
diff --git a/src/udev/rules/60-persistent-storage-tape.rules b/src/udev/rules/60-persistent-storage-tape.rules
deleted file mode 100644
index f2eabd92a..000000000
--- a/src/udev/rules/60-persistent-storage-tape.rules
+++ /dev/null
@@ -1,25 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-# persistent storage links: /dev/tape/{by-id,by-path}
-
-ACTION=="remove", GOTO="persistent_storage_tape_end"
-
-# type 8 devices are "Medium Changers"
-SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="scsi_id --sg-version=3 --export --whitelisted -d $devnode", \
-  SYMLINK+="tape/by-id/scsi-$env{ID_SERIAL}"
-
-SUBSYSTEM!="scsi_tape", GOTO="persistent_storage_tape_end"
-
-KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394"
-KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
-KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", KERNELS=="[0-9]*:*[0-9]", ENV{.BSG_DEV}="$root/bsg/$id"
-KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --whitelisted --export --device=$env{.BSG_DEV}", ENV{ID_BUS}="scsi"
-KERNEL=="st*[0-9]",  ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-KERNEL=="nst*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst"
-
-# by-path (parent device path)
-KERNEL=="st*[0-9]|nst*[0-9]", IMPORT{builtin}="path_id"
-KERNEL=="st*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}"
-KERNEL=="nst*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}-nst"
-
-LABEL="persistent_storage_tape_end"
diff --git a/src/udev/rules/60-persistent-storage.rules b/src/udev/rules/60-persistent-storage.rules
deleted file mode 100644
index b74821edd..000000000
--- a/src/udev/rules/60-persistent-storage.rules
+++ /dev/null
@@ -1,89 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-# persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path}
-# scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de>
-
-# forward scsi device event to corresponding block device
-ACTION=="change", SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST=="block", ATTR{block/*/uevent}="change"
-
-ACTION=="remove", GOTO="persistent_storage_end"
-
-# enable in-kernel media-presence polling
-ACTION=="add", SUBSYSTEM=="module", KERNEL=="block", ATTR{parameters/events_dfl_poll_msecs}=="0", ATTR{parameters/events_dfl_poll_msecs}="2000"
-
-SUBSYSTEM!="block", GOTO="persistent_storage_end"
-
-# skip rules for inappropriate block devices
-KERNEL=="fd*|mtd*|nbd*|gnbd*|btibm*|dm-*|md*", GOTO="persistent_storage_end"
-
-# ignore partitions that span the entire disk
-TEST=="whole_disk", GOTO="persistent_storage_end"
-
-# for partitions import parent information
-ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*"
-
-# virtio-blk
-KERNEL=="vd*[!0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}"
-KERNEL=="vd*[0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}-part%n"
-
-# ATA devices with their own "ata" kernel subsystem
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="ata", IMPORT{program}="ata_id --export $devnode"
-# ATA devices using the "scsi" subsystem
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $devnode"
-# ATA/ATAPI devices (SPC-3 or later) using the "scsi" subsystem
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $devnode"
-
-# Run ata_id on non-removable USB Mass Storage (SATA/PATA disks in enclosures)
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", ATTR{removable}=="0", SUBSYSTEMS=="usb", IMPORT{program}="ata_id --export $devnode"
-# Otherwise fall back to using usb_id for USB devices
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
-
-# scsi devices
-KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="scsi"
-KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="cciss"
-KERNEL=="sd*|sr*|cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
-KERNEL=="sd*|cciss*", ENV{DEVTYPE}=="partition", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
-
-# firewire
-KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}"
-KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n"
-
-KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ATTRS{serial}=="?*", ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}"
-KERNEL=="mmcblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
-KERNEL=="mspblk[0-9]", SUBSYSTEMS=="memstick", ATTRS{name}=="?*", ATTRS{serial}=="?*", ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}"
-KERNEL=="mspblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
-
-# by-path (parent device path)
-ENV{DEVTYPE}=="disk", DEVPATH!="*/virtual/*", IMPORT{builtin}="path_id"
-ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
-ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
-
-# skip unpartitioned removable media devices from drivers which do not send "change" events
-ENV{DEVTYPE}=="disk", KERNEL!="sd*|sr*", ATTR{removable}=="1", GOTO="persistent_storage_end"
-
-# probe filesystem metadata of optical drives which have a media inserted
-KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?*", \
-  IMPORT{builtin}="blkid --offset=$env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}"
-# single-session CDs do not have ID_CDROM_MEDIA_SESSION_LAST_OFFSET
-KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", \
-  IMPORT{builtin}="blkid --noraid"
-
-# probe filesystem metadata of disks
-KERNEL!="sr*", IMPORT{builtin}="blkid"
-
-# watch metadata changes by tools closing the device after writing
-KERNEL!="sr*", OPTIONS+="watch"
-
-# by-label/by-uuid links (filesystem metadata)
-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
-ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
-
-# by-id (World Wide Name)
-ENV{DEVTYPE}=="disk", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}"
-ENV{DEVTYPE}=="partition", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}-part%n"
-
-# by-partlabel/by-partuuid links (partition metadata)
-ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}"
-ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}"
-
-LABEL="persistent_storage_end"
diff --git a/src/udev/rules/75-net-description.rules b/src/udev/rules/75-net-description.rules
deleted file mode 100644
index ce57d48e8..000000000
--- a/src/udev/rules/75-net-description.rules
+++ /dev/null
@@ -1,14 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="net_end"
-SUBSYSTEM!="net", GOTO="net_end"
-
-SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id"
-SUBSYSTEMS=="usb", IMPORT{builtin}="usb-db"
-SUBSYSTEMS=="usb", ATTRS{idVendor}!="", ATTRS{idProduct}!="", ENV{ID_VENDOR_ID}="$attr{idVendor}", ENV{ID_MODEL_ID}="$attr{idProduct}"
-SUBSYSTEMS=="usb", GOTO="net_end"
-
-SUBSYSTEMS=="pci", IMPORT{builtin}="pci-db"
-SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
-
-LABEL="net_end"
diff --git a/src/udev/rules/75-tty-description.rules b/src/udev/rules/75-tty-description.rules
deleted file mode 100644
index 2e63e140c..000000000
--- a/src/udev/rules/75-tty-description.rules
+++ /dev/null
@@ -1,14 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="tty_end"
-SUBSYSTEM!="tty", GOTO="tty_end"
-
-SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id"
-SUBSYSTEMS=="usb", IMPORT{builtin}="usb-db"
-SUBSYSTEMS=="usb", ATTRS{idVendor}!="", ATTRS{idProduct}!="", ENV{ID_VENDOR_ID}="$attr{idVendor}", ENV{ID_MODEL_ID}="$attr{idProduct}"
-SUBSYSTEMS=="usb", GOTO="tty_end"
-
-SUBSYSTEMS=="pci", IMPORT{builtin}="pci-db"
-SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
-
-LABEL="tty_end"
diff --git a/src/udev/rules/78-sound-card.rules b/src/udev/rules/78-sound-card.rules
deleted file mode 100644
index e56444189..000000000
--- a/src/udev/rules/78-sound-card.rules
+++ /dev/null
@@ -1,89 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-SUBSYSTEM!="sound", GOTO="sound_end"
-
-ACTION=="add|change", KERNEL=="controlC*", ATTR{../uevent}="change"
-ACTION!="change", GOTO="sound_end"
-
-# Ok, we probably need a little explanation here for what the two lines above
-# are good for.
-#
-# The story goes like this: when ALSA registers a new sound card it emits a
-# series of 'add' events to userspace, for the main card device and for all the
-# child device nodes that belong to it. udev relays those to applications,
-# however only maintains the order between father and child, but not between
-# the siblings. The control device node creation can be used as synchronization
-# point. All other devices that belong to a card are created in the kernel
-# before it. However unfortunately due to the fact that siblings are forwarded
-# out of order by udev this fact is lost to applications.
-#
-# OTOH before an application can open a device it needs to make sure that all
-# its device nodes are completely created and set up.
-#
-# As a workaround for this issue we have added the udev rule above which will
-# generate a 'change' event on the main card device from the 'add' event of the
-# card's control device. Due to the ordering semantics of udev this event will
-# only be relayed after all child devices have finished processing properly.
-# When an application needs to listen for appearing devices it can hence look
-# for 'change' events only, and ignore the actual 'add' events.
-#
-# When the application is initialized at the same time as a device is plugged
-# in it may need to figure out if the 'change' event has already been triggered
-# or not for a card. To find that out we store the flag environment variable
-# SOUND_INITIALIZED on the device which simply tells us if the card 'change'
-# event has already been processed.
-
-KERNEL!="card*", GOTO="sound_end"
-
-ENV{SOUND_INITIALIZED}="1"
-
-SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
-SUBSYSTEMS=="usb", IMPORT{builtin}="usb-db"
-SUBSYSTEMS=="usb", GOTO="skip_pci"
-
-SUBSYSTEMS=="firewire", ATTRS{vendor_name}=="?*", ATTRS{model_name}=="?*", \
-  ENV{ID_BUS}="firewire", ENV{ID_VENDOR}="$attr{vendor_name}", ENV{ID_MODEL}="$attr{model_name}"
-SUBSYSTEMS=="firewire", ATTRS{guid}=="?*", ENV{ID_ID}="firewire-$attr{guid}"
-SUBSYSTEMS=="firewire", GOTO="skip_pci"
-
-
-SUBSYSTEMS=="pci", IMPORT{builtin}="pci-db"
-SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
-
-LABEL="skip_pci"
-
-ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}-$attr{id}"
-ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$attr{id}"
-
-IMPORT{builtin}="path_id"
-
-# The values used here for $SOUND_FORM_FACTOR and $SOUND_CLASS should be kept
-# in sync with those defined for PulseAudio's src/pulse/proplist.h
-# PA_PROP_DEVICE_FORM_FACTOR, PA_PROP_DEVICE_CLASS properties.
-
-# If the first PCM device of this card has the pcm class 'modem', then the card is a modem
-ATTR{pcmC%nD0p/pcm_class}=="modem", ENV{SOUND_CLASS}="modem", GOTO="sound_end"
-
-# Identify cards on the internal PCI bus as internal
-SUBSYSTEMS=="pci", DEVPATH=="*/0000:00:??.?/sound/*", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end"
-
-# Devices that also support Image/Video interfaces are most likely webcams
-SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACES}=="*:0e????:*", ENV{SOUND_FORM_FACTOR}="webcam", GOTO="sound_end"
-
-# Matching on the model strings is a bit ugly, I admit
-ENV{ID_MODEL}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
-
-LABEL="sound_end"
diff --git a/src/udev/rules/80-drivers.rules b/src/udev/rules/80-drivers.rules
deleted file mode 100644
index 38ebfeb0e..000000000
--- a/src/udev/rules/80-drivers.rules
+++ /dev/null
@@ -1,12 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="drivers_end"
-
-DRIVER!="?*", ENV{MODALIAS}=="?*", IMPORT{builtin}="kmod load $env{MODALIAS}"
-SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", IMPORT{builtin}="kmod load tifm_sd"
-SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", IMPORT{builtin}="kmod load tifm_ms"
-SUBSYSTEM=="memstick", IMPORT{builtin}="kmod load ms_block mspro_block"
-SUBSYSTEM=="i2o", IMPORT{builtin}="kmod load i2o_block"
-SUBSYSTEM=="module", KERNEL=="parport_pc", IMPORT{builtin}="kmod load ppdev"
-
-LABEL="drivers_end"
diff --git a/src/udev/rules/95-udev-late.rules b/src/udev/rules/95-udev-late.rules
deleted file mode 100644
index eca0faa5c..000000000
--- a/src/udev/rules/95-udev-late.rules
+++ /dev/null
@@ -1,4 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-# run a command on remove events
-ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
diff --git a/src/udev/src/scsi_id/.gitignore b/src/udev/scsi_id/.gitignore
index 6aebddd80..6aebddd80 100644
--- a/src/udev/src/scsi_id/.gitignore
+++ b/src/udev/scsi_id/.gitignore
diff --git a/src/udev/src/scsi_id/README b/src/udev/scsi_id/README
index 9cfe73991..9cfe73991 100644
--- a/src/udev/src/scsi_id/README
+++ b/src/udev/scsi_id/README
diff --git a/src/udev/src/scsi_id/scsi.h b/src/udev/scsi_id/scsi.h
index c423cac57..c423cac57 100644
--- a/src/udev/src/scsi_id/scsi.h
+++ b/src/udev/scsi_id/scsi.h
diff --git a/src/udev/src/scsi_id/scsi_id.c b/src/udev/scsi_id/scsi_id.c
index 9bb0d7f53..9bb0d7f53 100644
--- a/src/udev/src/scsi_id/scsi_id.c
+++ b/src/udev/scsi_id/scsi_id.c
diff --git a/src/udev/src/scsi_id/scsi_id.h b/src/udev/scsi_id/scsi_id.h
index 828a98305..828a98305 100644
--- a/src/udev/src/scsi_id/scsi_id.h
+++ b/src/udev/scsi_id/scsi_id.h
diff --git a/src/udev/src/scsi_id/scsi_serial.c b/src/udev/scsi_id/scsi_serial.c
index f1d63f40c..f1d63f40c 100644
--- a/src/udev/src/scsi_id/scsi_serial.c
+++ b/src/udev/scsi_id/scsi_serial.c
diff --git a/src/udev/src/.gitignore b/src/udev/src/.gitignore
deleted file mode 100644
index beb8604bc..000000000
--- a/src/udev/src/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-*.[78]
-*.html
-udev.pc
-libudev.pc
-udev*.service
diff --git a/src/udev/src/COPYING b/src/udev/src/COPYING
deleted file mode 100644
index d2e31278b..000000000
--- a/src/udev/src/COPYING
+++ /dev/null
@@ -1,502 +0,0 @@
-                  GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-                  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-                            NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-           How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-
-That's all there is to it!
diff --git a/src/udev/src/floppy/60-floppy.rules b/src/udev/src/floppy/60-floppy.rules
deleted file mode 100644
index 53e4a9e59..000000000
--- a/src/udev/src/floppy/60-floppy.rules
+++ /dev/null
@@ -1,4 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-SUBSYSTEM=="block", KERNEL=="fd[0-9]", ACTION=="add", ATTRS{cmos}=="?*", ENV{CMOS_TYPE}="$attr{cmos}", \
-  RUN+="create_floppy_devices -c -t $env{CMOS_TYPE} -m %M -M 0660 -G floppy $root/%k"
diff --git a/src/udev/src/floppy/create_floppy_devices.c b/src/udev/src/floppy/create_floppy_devices.c
deleted file mode 100644
index f71ef0d80..000000000
--- a/src/udev/src/floppy/create_floppy_devices.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Create all possible floppy device based on the CMOS type.
- * Based upon code from drivers/block/floppy.c
- *
- * Copyright(C) 2005, SUSE Linux Products GmbH
- *
- * Author: Hannes Reinecke <hare@suse.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-#include <pwd.h>
-#include <grp.h>
-
-#include "libudev.h"
-#include "libudev-private.h"
-
-static char *table[] = {
-        "", "d360", "h1200", "u360", "u720", "h360", "h720",
-        "u1440", "u2880", "CompaQ", "h1440", "u1680", "h410",
-        "u820", "h1476", "u1722", "h420", "u830", "h1494", "u1743",
-        "h880", "u1040", "u1120", "h1600", "u1760", "u1920",
-        "u3200", "u3520", "u3840", "u1840", "u800", "u1600",
-        NULL
-};
-
-static int t360[] = { 1, 0 };
-static int t1200[] = { 2, 5, 6, 10, 12, 14, 16, 18, 20, 23, 0 };
-static int t3in[] = { 8, 9, 26, 27, 28, 7, 11, 15, 19, 24, 25, 29, 31, 3, 4, 13, 17, 21, 22, 30, 0 };
-static int *table_sup[] = { NULL, t360, t1200, t3in+5+8, t3in+5, t3in, t3in };
-
-static void log_fn(struct udev *udev, int priority,
-                   const char *file, int line, const char *fn,
-                   const char *format, va_list args)
-{
-        vsyslog(priority, format, args);
-}
-
-int main(int argc, char **argv)
-{
-        struct udev *udev;
-        char *dev;
-        char *devname;
-        char node[64];
-        int type = 0, i, fdnum, c;
-        int major = 2, minor;
-        uid_t uid = 0;
-        gid_t gid = 0;
-        mode_t mode = 0660;
-        int create_nodes = 0;
-        int print_nodes = 0;
-        int is_err = 0;
-
-        udev = udev_new();
-        if (udev == NULL)
-                goto exit;
-
-        udev_log_init("create_floppy_devices");
-        udev_set_log_fn(udev, log_fn);
-        udev_selinux_init(udev);
-
-        while ((c = getopt(argc, argv, "cudm:U:G:M:t:")) != -1) {
-                switch (c) {
-                case 'c':
-                        create_nodes = 1;
-                        break;
-                case 'd':
-                        print_nodes = 1;
-                        break;
-                case 'U':
-                        uid = util_lookup_user(udev, optarg);
-                        break;
-                case 'G':
-                        gid = util_lookup_group(udev, optarg);
-                        break;
-                case 'M':
-                        mode = strtol(optarg, NULL, 0);
-                        mode = mode & 0666;
-                        break;
-                case 'm':
-                        major = strtol(optarg, NULL, 0);
-                        break;
-                case 't':
-                        type = strtol(optarg, NULL, 0);
-                        break;
-                default:
-                        is_err++;
-                        break;
-                }
-        }
-
-        if (is_err || optind >= argc) {
-                printf("Usage:  %s [OPTION] device\n"
-                       "  -c   create\n"
-                       "  -d   debug\n"
-                       "  -m   Major number\n"
-                       "  -t   floppy type number\n"
-                       "  -U   device node user ownership\n"
-                       "  -G   device node group owner\n"
-                       "  -M   device node mode\n"
-                       "\n", argv[0]);
-                return 1;
-        }
-
-        dev = argv[optind];
-        devname = strrchr(dev, '/');
-        if (devname != NULL)
-                devname = &devname[1];
-        else
-                devname = dev;
-        if (strncmp(devname, "fd", 2) != 0) {
-                fprintf(stderr,"Device '%s' is not a floppy device\n", dev);
-                return 1;
-        }
-
-        fdnum = strtol(&devname[2], NULL, 10);
-        if (fdnum < 0 || fdnum > 7) {
-                fprintf(stderr,"Floppy device number %d out of range (0-7)\n", fdnum);
-                return 1;
-        }
-        if (fdnum > 3)
-                fdnum += 124;
-
-        if (major < 1) {
-                fprintf(stderr,"Invalid major number %d\n", major);
-                return 1;
-        }
-
-        if (type < 0 || type >= (int) ARRAY_SIZE(table_sup)) {
-                fprintf(stderr,"Invalid CMOS type %d\n", type);
-                return 1;
-        }
-
-        if (type == 0)
-                return 0;
-
-        i = 0;
-        while (table_sup[type][i]) {
-                sprintf(node, "%s%s", dev, table[table_sup[type][i]]);
-                minor = (table_sup[type][i] << 2) + fdnum;
-                if (print_nodes)
-                        printf("%s b %.4o %d %d\n", node, mode, major, minor);
-                if (create_nodes) {
-                        unlink(node);
-                        udev_selinux_setfscreatecon(udev, node, S_IFBLK | mode);
-                        mknod(node, S_IFBLK | mode, makedev(major,minor));
-                        udev_selinux_resetfscreatecon(udev);
-                        chown(node, uid, gid);
-                        chmod(node, S_IFBLK | mode);
-                }
-                i++;
-        }
-
-        udev_selinux_exit(udev);
-        udev_unref(udev);
-        udev_log_close();
-exit:
-        return 0;
-}
diff --git a/src/udev/src/gudev/COPYING b/src/udev/src/gudev/COPYING
deleted file mode 100644
index da97db2bd..000000000
--- a/src/udev/src/gudev/COPYING
+++ /dev/null
@@ -1,502 +0,0 @@
-                  GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-                  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-                            NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-           How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-
-That's all there is to it!
diff --git a/src/udev/src/rule_generator/75-cd-aliases-generator.rules b/src/udev/src/rule_generator/75-cd-aliases-generator.rules
deleted file mode 100644
index e6da0101d..000000000
--- a/src/udev/src/rule_generator/75-cd-aliases-generator.rules
+++ /dev/null
@@ -1,9 +0,0 @@
-# these rules generate rules for the /dev/{cdrom,dvd,...} symlinks
-
-# the "path" of usb/ieee1394 devices changes frequently, use "id"
-ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb|ieee1394", ENV{ID_CDROM}=="?*", ENV{GENERATED}!="?*", \
-  PROGRAM="write_cd_rules by-id", SYMLINK+="%c", GOTO="persistent_cd_end"
-
-ACTION=="add", SUBSYSTEM=="block", ENV{ID_CDROM}=="?*", ENV{GENERATED}!="?*", PROGRAM="write_cd_rules", SYMLINK+="%c"
-
-LABEL="persistent_cd_end"
diff --git a/src/udev/src/rule_generator/75-persistent-net-generator.rules b/src/udev/src/rule_generator/75-persistent-net-generator.rules
deleted file mode 100644
index 4f8057347..000000000
--- a/src/udev/src/rule_generator/75-persistent-net-generator.rules
+++ /dev/null
@@ -1,102 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-# these rules generate rules for persistent network device naming
-#
-# variables used to communicate:
-#   MATCHADDR             MAC address used for the match
-#   MATCHID               bus_id used for the match
-#   MATCHDRV              driver name used for the match
-#   MATCHIFTYPE           interface type match
-#   COMMENT               comment to add to the generated rule
-#   INTERFACE_NAME        requested name supplied by external tool
-#   INTERFACE_NEW         new interface name returned by rule writer
-
-ACTION!="add", GOTO="persistent_net_generator_end"
-SUBSYSTEM!="net", GOTO="persistent_net_generator_end"
-
-# ignore the interface if a name has already been set
-NAME=="?*", GOTO="persistent_net_generator_end"
-
-# device name whitelist
-KERNEL!="eth*|ath*|wlan*[0-9]|msh*|ra*|sta*|ctc*|lcs*|hsi*", GOTO="persistent_net_generator_end"
-
-# ignore Xen virtual interfaces
-SUBSYSTEMS=="xen", GOTO="persistent_net_generator_end"
-
-# read MAC address
-ENV{MATCHADDR}="$attr{address}"
-
-# match interface type
-ENV{MATCHIFTYPE}="$attr{type}"
-
-# ignore KVM virtual interfaces
-ENV{MATCHADDR}=="52:54:00:*", GOTO="persistent_net_generator_end"
-# ignore VMWare virtual interfaces
-ENV{MATCHADDR}=="00:0c:29:*|00:50:56:*", GOTO="persistent_net_generator_end"
-# ignore Hyper-V virtual interfaces
-ENV{MATCHADDR}=="00:15:5d:*", GOTO="persistent_net_generator_end"
-
-# These vendors are known to violate the local MAC address assignment scheme
-# Interlan, DEC (UNIBUS or QBUS), Apollo, Cisco, Racal-Datacom
-ENV{MATCHADDR}=="02:07:01:*", GOTO="globally_administered_whitelist"
-# 3Com
-ENV{MATCHADDR}=="02:60:60:*", GOTO="globally_administered_whitelist"
-# 3Com IBM PC; Imagen; Valid; Cisco; Apple
-ENV{MATCHADDR}=="02:60:8c:*", GOTO="globally_administered_whitelist"
-# Intel
-ENV{MATCHADDR}=="02:a0:c9:*", GOTO="globally_administered_whitelist"
-# Olivetti
-ENV{MATCHADDR}=="02:aa:3c:*", GOTO="globally_administered_whitelist"
-# CMC Masscomp; Silicon Graphics; Prime EXL
-ENV{MATCHADDR}=="02:cf:1f:*", GOTO="globally_administered_whitelist"
-# Prominet Corporation Gigabit Ethernet Switch
-ENV{MATCHADDR}=="02:e0:3b:*", GOTO="globally_administered_whitelist"
-# BTI (Bus-Tech, Inc.) IBM Mainframes
-ENV{MATCHADDR}=="02:e6:d3:*", GOTO="globally_administered_whitelist"
-# Realtek
-ENV{MATCHADDR}=="52:54:00:*", GOTO="globally_administered_whitelist"
-# Novell 2000
-ENV{MATCHADDR}=="52:54:4c:*", GOTO="globally_administered_whitelist"
-# Realtec
-ENV{MATCHADDR}=="52:54:ab:*", GOTO="globally_administered_whitelist"
-# Kingston Technologies
-ENV{MATCHADDR}=="e2:0c:0f:*", GOTO="globally_administered_whitelist"
-# Xensource
-ENV{MATCHADDR}=="00:16:3e:*", GOTO="globally_administered_whitelist"
-
-# match interface dev_id
-ATTR{dev_id}=="?*", ENV{MATCHDEVID}="$attr{dev_id}"
-
-# do not use "locally administered" MAC address
-ENV{MATCHADDR}=="?[2367abef]:*", ENV{MATCHADDR}=""
-
-# do not use empty address
-ENV{MATCHADDR}=="00:00:00:00:00:00", ENV{MATCHADDR}=""
-
-LABEL="globally_administered_whitelist"
-
-# build comment line for generated rule:
-SUBSYSTEMS=="pci", ENV{COMMENT}="PCI device $attr{vendor}:$attr{device} ($driver)"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="?*", ENV{COMMENT}="USB device 0x$attr{idVendor}:0x$attr{idProduct} ($driver)"
-SUBSYSTEMS=="pcmcia", ENV{COMMENT}="PCMCIA device $attr{card_id}:$attr{manf_id} ($driver)"
-SUBSYSTEMS=="ieee1394", ENV{COMMENT}="Firewire device $attr{host_id})"
-
-# ibmveth likes to use "locally administered" MAC addresses
-DRIVERS=="ibmveth", ENV{MATCHADDR}="$attr{address}", ENV{COMMENT}="ibmveth ($id)"
-
-# S/390 uses id matches only, do not use MAC address match
-SUBSYSTEMS=="ccwgroup", ENV{COMMENT}="S/390 $driver device at $id", ENV{MATCHID}="$id", ENV{MATCHDRV}="$driver", ENV{MATCHADDR}=""
-
-# see if we got enough data to create a rule
-ENV{MATCHADDR}=="", ENV{MATCHID}=="", ENV{INTERFACE_NAME}=="", GOTO="persistent_net_generator_end"
-
-# default comment
-ENV{COMMENT}=="", ENV{COMMENT}="net device ($attr{driver})"
-
-# write rule
-DRIVERS=="?*", IMPORT{program}="write_net_rules"
-
-# rename interface if needed
-ENV{INTERFACE_NEW}=="?*", NAME="$env{INTERFACE_NEW}"
-
-LABEL="persistent_net_generator_end"
diff --git a/src/udev/src/rule_generator/rule_generator.functions b/src/udev/src/rule_generator/rule_generator.functions
deleted file mode 100644
index 2eec1b6ab..000000000
--- a/src/udev/src/rule_generator/rule_generator.functions
+++ /dev/null
@@ -1,113 +0,0 @@
-# functions used by the udev rule generator
-
-# Copyright (C) 2006 Marco d'Itri <md@Linux.IT>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-PATH='/usr/bin:/bin:/usr/sbin:/sbin'
-
-# Read a single line from file $1 in the $DEVPATH directory.
-# The function must not return an error even if the file does not exist.
-sysread() {
-        local file="$1"
-        [ -e "/sys$DEVPATH/$file" ] || return 0
-        local value
-        read value < "/sys$DEVPATH/$file" || return 0
-        echo "$value"
-}
-
-sysreadlink() {
-        local file="$1"
-        [ -e "/sys$DEVPATH/$file" ] || return 0
-        readlink -f /sys$DEVPATH/$file 2> /dev/null || true
-}
-
-# Return true if a directory is writeable.
-writeable() {
-        if ln -s test-link $1/.is-writeable 2> /dev/null; then
-                rm -f $1/.is-writeable
-                return 0
-        else
-                return 1
-        fi
-}
-
-# Create a lock file for the current rules file.
-lock_rules_file() {
-        RUNDIR=$(udevadm info --run)
-        [ -e "$RUNDIR" ] || return 0
-
-        RULES_LOCK="$RUNDIR/.lock-${RULES_FILE##*/}"
-
-        retry=30
-        while ! mkdir $RULES_LOCK 2> /dev/null; do
-                if [ $retry -eq 0 ]; then
-                         echo "Cannot lock $RULES_FILE!" >&2
-                         exit 2
-                fi
-                sleep 1
-                retry=$(($retry - 1))
-        done
-}
-
-unlock_rules_file() {
-        [ "$RULES_LOCK" ] || return 0
-        rmdir $RULES_LOCK || true
-}
-
-# Choose the real rules file if it is writeable or a temporary file if not.
-# Both files should be checked later when looking for existing rules.
-choose_rules_file() {
-        RUNDIR=$(udevadm info --run)
-        local tmp_rules_file="$RUNDIR/tmp-rules--${RULES_FILE##*/}"
-        [ -e "$RULES_FILE" -o -e "$tmp_rules_file" ] || PRINT_HEADER=1
-
-        if writeable ${RULES_FILE%/*}; then
-                RO_RULES_FILE='/dev/null'
-        else
-                RO_RULES_FILE=$RULES_FILE
-                RULES_FILE=$tmp_rules_file
-        fi
-}
-
-# Return the name of the first free device.
-raw_find_next_available() {
-        local links="$1"
-
-        local basename=${links%%[ 0-9]*}
-        local max=-1
-        for name in $links; do
-                local num=${name#$basename}
-                [ "$num" ] || num=0
-                [ $num -gt $max ] && max=$num
-        done
-
-        local max=$(($max + 1))
-        # "name0" actually is just "name"
-        [ $max -eq 0 ] && return
-        echo "$max"
-}
-
-# Find all rules matching a key (with action) and a pattern.
-find_all_rules() {
-        local key="$1"
-        local linkre="$2"
-        local match="$3"
-
-        local search='.*[[:space:],]'"$key"'"('"$linkre"')".*'
-        echo $(sed -n -r -e 's/^#.*//' -e "${match}s/${search}/\1/p" \
-                $RO_RULES_FILE \
-                $([ -e $RULES_FILE ] && echo $RULES_FILE) \
-                2>/dev/null)
-}
diff --git a/src/udev/src/rule_generator/write_cd_rules b/src/udev/src/rule_generator/write_cd_rules
deleted file mode 100644
index 645b9cd52..000000000
--- a/src/udev/src/rule_generator/write_cd_rules
+++ /dev/null
@@ -1,126 +0,0 @@
-#!/bin/sh -e
-
-# This script is run if an optical drive lacks a rule for persistent naming.
-#
-# It adds symlinks for optical drives based on the device class determined
-# by cdrom_id and used ID_PATH to identify the device.
-
-# (C) 2006 Marco d'Itri <md@Linux.IT>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# debug, if UDEV_LOG=<debug>
-if [ -n "$UDEV_LOG" ]; then
-        if [ "$UDEV_LOG" -ge 7 ]; then
-                set -x
-        fi
-fi
-
-RULES_FILE="/etc/udev/rules.d/70-persistent-cd.rules"
-
-. /lib/udev/rule_generator.functions
-
-find_next_available() {
-        raw_find_next_available "$(find_all_rules 'SYMLINK\+=' "$1")"
-}
-
-write_rule() {
-        local match="$1"
-        local link="$2"
-        local comment="$3"
-
-        {
-        if [ "$PRINT_HEADER" ]; then
-                PRINT_HEADER=
-                echo "# This file was automatically generated by the $0"
-                echo "# program, run by the cd-aliases-generator.rules rules file."
-                echo "#"
-                echo "# You can modify it, as long as you keep each rule on a single"
-                echo "# line, and set the \$GENERATED variable."
-                echo ""
-        fi
-
-        [ "$comment" ] && echo "# $comment"
-        echo "$match, SYMLINK+=\"$link\", ENV{GENERATED}=\"1\""
-        } >> $RULES_FILE
-        SYMLINKS="$SYMLINKS $link"
-}
-
-if [ -z "$DEVPATH" ]; then
-        echo "Missing \$DEVPATH." >&2
-        exit 1
-fi
-if [ -z "$ID_CDROM" ]; then
-        echo "$DEVPATH is not a CD reader." >&2
-        exit 1
-fi
-
-if [ "$1" ]; then
-        METHOD="$1"
-else
-        METHOD='by-path'
-fi
-
-case "$METHOD" in
-        by-path)
-        if [ -z "$ID_PATH" ]; then
-                echo "$DEVPATH not supported by path_id. by-id may work." >&2
-                exit 1
-        fi
-        RULE="ENV{ID_PATH}==\"$ID_PATH\""
-        ;;
-
-        by-id)
-        if [ "$ID_SERIAL" ]; then
-                RULE="ENV{ID_SERIAL}==\"$ID_SERIAL\""
-        elif [ "$ID_MODEL" -a "$ID_REVISION" ]; then
-                RULE="ENV{ID_MODEL}==\"$ID_MODEL\", ENV{ID_REVISION}==\"$ID_REVISION\""
-        else
-                echo "$DEVPATH not supported by ata_id. by-path may work." >&2
-                exit 1
-        fi
-        ;;
-
-        *)
-        echo "Invalid argument (must be either by-path or by-id)." >&2
-        exit 1
-        ;;
-esac
-
-# Prevent concurrent processes from modifying the file at the same time.
-lock_rules_file
-
-# Check if the rules file is writeable.
-choose_rules_file
-
-link_num=$(find_next_available 'cdrom[0-9]*')
-
-match="SUBSYSTEM==\"block\", ENV{ID_CDROM}==\"?*\", $RULE"
-
-comment="$ID_MODEL ($ID_PATH)"
-
-        write_rule "$match" "cdrom$link_num" "$comment"
-[ "$ID_CDROM_CD_R" -o "$ID_CDROM_CD_RW" ] && \
-        write_rule "$match" "cdrw$link_num"
-[ "$ID_CDROM_DVD" ] && \
-        write_rule "$match" "dvd$link_num"
-[ "$ID_CDROM_DVD_R" -o "$ID_CDROM_DVD_RW" -o "$ID_CDROM_DVD_RAM" ] && \
-        write_rule "$match" "dvdrw$link_num"
-echo >> $RULES_FILE
-
-unlock_rules_file
-
-echo $SYMLINKS
-
-exit 0
diff --git a/src/udev/src/rule_generator/write_net_rules b/src/udev/src/rule_generator/write_net_rules
deleted file mode 100644
index bcea4b09d..000000000
--- a/src/udev/src/rule_generator/write_net_rules
+++ /dev/null
@@ -1,141 +0,0 @@
-#!/bin/sh -e
-
-# This script is run to create persistent network device naming rules
-# based on properties of the device.
-# If the interface needs to be renamed, INTERFACE_NEW=<name> will be printed
-# on stdout to allow udev to IMPORT it.
-
-# variables used to communicate:
-#   MATCHADDR             MAC address used for the match
-#   MATCHID               bus_id used for the match
-#   MATCHDEVID            dev_id used for the match
-#   MATCHDRV              driver name used for the match
-#   MATCHIFTYPE           interface type match
-#   COMMENT               comment to add to the generated rule
-#   INTERFACE_NAME        requested name supplied by external tool
-#   INTERFACE_NEW         new interface name returned by rule writer
-
-# Copyright (C) 2006 Marco d'Itri <md@Linux.IT>
-# Copyright (C) 2007 Kay Sievers <kay.sievers@vrfy.org>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# debug, if UDEV_LOG=<debug>
-if [ -n "$UDEV_LOG" ]; then
-        if [ "$UDEV_LOG" -ge 7 ]; then
-                set -x
-        fi
-fi
-
-RULES_FILE='/etc/udev/rules.d/70-persistent-net.rules'
-
-. /lib/udev/rule_generator.functions
-
-interface_name_taken() {
-        local value="$(find_all_rules 'NAME=' $INTERFACE)"
-        if [ "$value" ]; then
-                return 0
-        else
-                return 1
-        fi
-}
-
-find_next_available() {
-        raw_find_next_available "$(find_all_rules 'NAME=' "$1")"
-}
-
-write_rule() {
-        local match="$1"
-        local name="$2"
-        local comment="$3"
-
-        {
-        if [ "$PRINT_HEADER" ]; then
-                PRINT_HEADER=
-                echo "# This file was automatically generated by the $0"
-                echo "# program, run by the persistent-net-generator.rules rules file."
-                echo "#"
-                echo "# You can modify it, as long as you keep each rule on a single"
-                echo "# line, and change only the value of the NAME= key."
-        fi
-
-        echo ""
-        [ "$comment" ] && echo "# $comment"
-        echo "SUBSYSTEM==\"net\", ACTION==\"add\"$match, NAME=\"$name\""
-        } >> $RULES_FILE
-}
-
-if [ -z "$INTERFACE" ]; then
-        echo "missing \$INTERFACE" >&2
-        exit 1
-fi
-
-# Prevent concurrent processes from modifying the file at the same time.
-lock_rules_file
-
-# Check if the rules file is writeable.
-choose_rules_file
-
-# the DRIVERS key is needed to not match bridges and VLAN sub-interfaces
-if [ "$MATCHADDR" ]; then
-        match="$match, DRIVERS==\"?*\", ATTR{address}==\"$MATCHADDR\""
-fi
-
-if [ "$MATCHDRV" ]; then
-        match="$match, DRIVERS==\"$MATCHDRV\""
-fi
-
-if [ "$MATCHDEVID" ]; then
-        match="$match, ATTR{dev_id}==\"$MATCHDEVID\""
-fi
-
-if [ "$MATCHID" ]; then
-        match="$match, KERNELS==\"$MATCHID\""
-fi
-
-if [ "$MATCHIFTYPE" ]; then
-        match="$match, ATTR{type}==\"$MATCHIFTYPE\""
-fi
-
-if [ -z "$match" ]; then
-        echo "missing valid match" >&2
-        unlock_rules_file
-        exit 1
-fi
-
-basename=${INTERFACE%%[0-9]*}
-match="$match, KERNEL==\"$basename*\""
-
-if [ "$INTERFACE_NAME" ]; then
-        # external tools may request a custom name
-        COMMENT="$COMMENT (custom name provided by external tool)"
-        if [ "$INTERFACE_NAME" != "$INTERFACE" ]; then
-                INTERFACE=$INTERFACE_NAME;
-                echo "INTERFACE_NEW=$INTERFACE"
-        fi
-else
-        # if a rule using the current name already exists, find a new name
-        if interface_name_taken; then
-                INTERFACE="$basename$(find_next_available "$basename[0-9]*")"
-                # prevent INTERFACE from being "eth" instead of "eth0"
-                [ "$INTERFACE" = "${INTERFACE%%[ \[\]0-9]*}" ] && INTERFACE=${INTERFACE}0
-                echo "INTERFACE_NEW=$INTERFACE"
-        fi
-fi
-
-write_rule "$match" "$INTERFACE" "$COMMENT"
-
-unlock_rules_file
-
-exit 0
diff --git a/src/udev/src/scsi_id/scsi_id.8 b/src/udev/src/scsi_id/scsi_id.8
deleted file mode 100644
index 0d4dba914..000000000
--- a/src/udev/src/scsi_id/scsi_id.8
+++ /dev/null
@@ -1,119 +0,0 @@
-.TH SCSI_ID 8 "December 2003" "" "Linux Administrator's Manual"
-.SH NAME
-scsi_id \- retrieve and generate a unique SCSI identifier
-.SH SYNOPSIS
-.BI scsi_id
-[\fIoptions\fP]
-.SH "DESCRIPTION"
-.B scsi_id
-queries a SCSI device via the SCSI INQUIRY vital product data (VPD) page 0x80 or
-0x83 and uses the resulting data to generate a value that is unique across
-all SCSI devices that properly support page 0x80 or page 0x83.
-
-If a result is generated it is sent to standard output, and the program
-exits with a zero value. If no identifier is output, the program exits
-with a non\-zero value.
-
-\fBscsi_id\fP is primarily for use by other utilities such as \fBudev\fP
-that require a unique SCSI identifier.
-
-By default all devices are assumed black listed, the \fB\-\-whitelisted\fP option must
-be specified on the command line or in the config file for any useful
-behaviour.
-
-SCSI commands are sent directly to the device via the SG_IO ioctl
-interface.
-
-In order to generate unique values for either page 0x80 or page 0x83, the
-serial numbers or world wide names are prefixed as follows.
-
-Identifiers based on page 0x80 are prefixed by the character 'S', the SCSI
-vendor, the SCSI product (model) and then the the serial number returned
-by page 0x80. For example:
-
-.sp
-.nf
-# /usr/lib/udev/scsi_id \-\-page=0x80 \-\-whitelisted \-\-device=/dev/sda
-SIBM     3542           1T05078453
-.fi
-.P
-
-Identifiers based on page 0x83 are prefixed by the identifier type
-followed by the page 0x83 identifier. For example, a device with a NAA
-(Name Address Authority) type of 3 (also in this case the page 0x83
-identifier starts with the NAA value of 6):
-
-.sp
-.nf
-# /usr/lib/udev/scsi_id \-\-page=0x83 \-\-whitelisted \-\-device=/dev/sda
-3600a0b80000b174b000000d63efc5c8c
-.fi
-.P
-
-.SH OPTIONS
-.TP
-.BI \-\-blacklisted
-The default behaviour \- treat the device as black listed, and do nothing
-unless a white listed device is found in the scsi_id config\-file.
-.TP
-.BI \-\-device=\| device\^
-Send SG_IO commands to \fBdevice\fP, such as \fB/dev/sdc\fP.
-.TP
-.BI \-\-config=\| config\-file
-Read configuration and black/white list entries from
-.B config\-file
-rather than the default
-.B /etc/scsi_id.config
-file.
-.TP
-.BI \-\-whitelisted
-Treat the device as white listed. The \fB\-\-whitelisted\fP option must be specified
-on the command line or in the scsi_id configuration file for
-.B scsi_id
-to generate any output.
-.TP
-.BI \-\-page=\| 0x80 | 0x83 | pre-spc3-83
-Use SCSI INQUIRY VPD page code 0x80, 0x83, or pre-spc3-83.
-.sp
-The default
-behaviour is to query the available VPD pages, and use page 0x83 if found,
-else page 0x80 if found, else nothing.
-.sp
-Page pre-spc3-83 should only be utilized for those scsi devices which
-are not compliant with the SPC-2 or SPC-3 format for page 83.  While this
-option is used for older model 4, 5, and 6 EMC Symmetrix devices, its
-use with SPC-2 or SPC-3 compliant devices will fallback to the page 83
-format supported by these devices.
-.TP
-.BI \-\-replace-whitespace
-Reformat the output : replace all whitespaces by underscores.
-.TP
-.BI \-\-export
-Export all data in KEY=<value> format used to import in other programs.
-.TP
-.BI \-\-verbose
-Generate verbose debugging output.
-.TP
-.BI \-\-version
-Display version number and exit.
-.RE
-
-.SH "FILES"
-.nf
-.ft B
-.ft
-.TP
-\fI/etc/scsi_id.config\fP
-Configuration of black/white list entries and per device options:
-# one config per line, short match strings match longer strings
-# vendor=string[,model=string],options=<per-device scsi_id command line options>
-vendor="ATA",options=-p 0x80
-.RE
-.fi
-.LP
-.SH "SEE ALSO"
-.BR udev (7)
-.SH AUTHORS
-Developed by Patrick Mansfield <patmans@us.ibm.com> based on SCSI ID
-source included in earlier linux 2.5 kernels, sg_utils source, and SCSI
-specifications.
diff --git a/src/udev/src/sd-daemon.c b/src/udev/src/sd-daemon.c
deleted file mode 100644
index 763e079b4..000000000
--- a/src/udev/src/sd-daemon.c
+++ /dev/null
@@ -1,530 +0,0 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
-/***
-  Copyright 2010 Lennart Poettering
-
-  Permission is hereby granted, free of charge, to any person
-  obtaining a copy of this software and associated documentation files
-  (the "Software"), to deal in the Software without restriction,
-  including without limitation the rights to use, copy, modify, merge,
-  publish, distribute, sublicense, and/or sell copies of the Software,
-  and to permit persons to whom the Software is furnished to do so,
-  subject to the following conditions:
-
-  The above copyright notice and this permission notice shall be
-  included in all copies or substantial portions of the Software.
-
-  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-  NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
-  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-  ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-  CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-  SOFTWARE.
-***/
-
-#ifndef _GNU_SOURCE
-#define _GNU_SOURCE
-#endif
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <sys/un.h>
-#ifdef __BIONIC__
-#include <linux/fcntl.h>
-#else
-#include <sys/fcntl.h>
-#endif
-#include <netinet/in.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stddef.h>
-#include <limits.h>
-
-#if defined(__linux__)
-#include <mqueue.h>
-#endif
-
-#include "sd-daemon.h"
-
-#if (__GNUC__ >= 4)
-#ifdef SD_EXPORT_SYMBOLS
-/* Export symbols */
-#define _sd_export_ __attribute__ ((visibility("default")))
-#else
-/* Don't export the symbols */
-#define _sd_export_ __attribute__ ((visibility("hidden")))
-#endif
-#else
-#define _sd_export_
-#endif
-
-_sd_export_ int sd_listen_fds(int unset_environment) {
-
-#if defined(DISABLE_SYSTEMD) || !defined(__linux__)
-        return 0;
-#else
-        int r, fd;
-        const char *e;
-        char *p = NULL;
-        unsigned long l;
-
-        if (!(e = getenv("LISTEN_PID"))) {
-                r = 0;
-                goto finish;
-        }
-
-        errno = 0;
-        l = strtoul(e, &p, 10);
-
-        if (errno != 0) {
-                r = -errno;
-                goto finish;
-        }
-
-        if (!p || *p || l <= 0) {
-                r = -EINVAL;
-                goto finish;
-        }
-
-        /* Is this for us? */
-        if (getpid() != (pid_t) l) {
-                r = 0;
-                goto finish;
-        }
-
-        if (!(e = getenv("LISTEN_FDS"))) {
-                r = 0;
-                goto finish;
-        }
-
-        errno = 0;
-        l = strtoul(e, &p, 10);
-
-        if (errno != 0) {
-                r = -errno;
-                goto finish;
-        }
-
-        if (!p || *p) {
-                r = -EINVAL;
-                goto finish;
-        }
-
-        for (fd = SD_LISTEN_FDS_START; fd < SD_LISTEN_FDS_START + (int) l; fd ++) {
-                int flags;
-
-                if ((flags = fcntl(fd, F_GETFD)) < 0) {
-                        r = -errno;
-                        goto finish;
-                }
-
-                if (flags & FD_CLOEXEC)
-                        continue;
-
-                if (fcntl(fd, F_SETFD, flags | FD_CLOEXEC) < 0) {
-                        r = -errno;
-                        goto finish;
-                }
-        }
-
-        r = (int) l;
-
-finish:
-        if (unset_environment) {
-                unsetenv("LISTEN_PID");
-                unsetenv("LISTEN_FDS");
-        }
-
-        return r;
-#endif
-}
-
-_sd_export_ int sd_is_fifo(int fd, const char *path) {
-        struct stat st_fd;
-
-        if (fd < 0)
-                return -EINVAL;
-
-        memset(&st_fd, 0, sizeof(st_fd));
-        if (fstat(fd, &st_fd) < 0)
-                return -errno;
-
-        if (!S_ISFIFO(st_fd.st_mode))
-                return 0;
-
-        if (path) {
-                struct stat st_path;
-
-                memset(&st_path, 0, sizeof(st_path));
-                if (stat(path, &st_path) < 0) {
-
-                        if (errno == ENOENT || errno == ENOTDIR)
-                                return 0;
-
-                        return -errno;
-                }
-
-                return
-                        st_path.st_dev == st_fd.st_dev &&
-                        st_path.st_ino == st_fd.st_ino;
-        }
-
-        return 1;
-}
-
-_sd_export_ int sd_is_special(int fd, const char *path) {
-        struct stat st_fd;
-
-        if (fd < 0)
-                return -EINVAL;
-
-        if (fstat(fd, &st_fd) < 0)
-                return -errno;
-
-        if (!S_ISREG(st_fd.st_mode) && !S_ISCHR(st_fd.st_mode))
-                return 0;
-
-        if (path) {
-                struct stat st_path;
-
-                if (stat(path, &st_path) < 0) {
-
-                        if (errno == ENOENT || errno == ENOTDIR)
-                                return 0;
-
-                        return -errno;
-                }
-
-                if (S_ISREG(st_fd.st_mode) && S_ISREG(st_path.st_mode))
-                        return
-                                st_path.st_dev == st_fd.st_dev &&
-                                st_path.st_ino == st_fd.st_ino;
-                else if (S_ISCHR(st_fd.st_mode) && S_ISCHR(st_path.st_mode))
-                        return st_path.st_rdev == st_fd.st_rdev;
-                else
-                        return 0;
-        }
-
-        return 1;
-}
-
-static int sd_is_socket_internal(int fd, int type, int listening) {
-        struct stat st_fd;
-
-        if (fd < 0 || type < 0)
-                return -EINVAL;
-
-        if (fstat(fd, &st_fd) < 0)
-                return -errno;
-
-        if (!S_ISSOCK(st_fd.st_mode))
-                return 0;
-
-        if (type != 0) {
-                int other_type = 0;
-                socklen_t l = sizeof(other_type);
-
-                if (getsockopt(fd, SOL_SOCKET, SO_TYPE, &other_type, &l) < 0)
-                        return -errno;
-
-                if (l != sizeof(other_type))
-                        return -EINVAL;
-
-                if (other_type != type)
-                        return 0;
-        }
-
-        if (listening >= 0) {
-                int accepting = 0;
-                socklen_t l = sizeof(accepting);
-
-                if (getsockopt(fd, SOL_SOCKET, SO_ACCEPTCONN, &accepting, &l) < 0)
-                        return -errno;
-
-                if (l != sizeof(accepting))
-                        return -EINVAL;
-
-                if (!accepting != !listening)
-                        return 0;
-        }
-
-        return 1;
-}
-
-union sockaddr_union {
-        struct sockaddr sa;
-        struct sockaddr_in in4;
-        struct sockaddr_in6 in6;
-        struct sockaddr_un un;
-        struct sockaddr_storage storage;
-};
-
-_sd_export_ int sd_is_socket(int fd, int family, int type, int listening) {
-        int r;
-
-        if (family < 0)
-                return -EINVAL;
-
-        if ((r = sd_is_socket_internal(fd, type, listening)) <= 0)
-                return r;
-
-        if (family > 0) {
-                union sockaddr_union sockaddr;
-                socklen_t l;
-
-                memset(&sockaddr, 0, sizeof(sockaddr));
-                l = sizeof(sockaddr);
-
-                if (getsockname(fd, &sockaddr.sa, &l) < 0)
-                        return -errno;
-
-                if (l < sizeof(sa_family_t))
-                        return -EINVAL;
-
-                return sockaddr.sa.sa_family == family;
-        }
-
-        return 1;
-}
-
-_sd_export_ int sd_is_socket_inet(int fd, int family, int type, int listening, uint16_t port) {
-        union sockaddr_union sockaddr;
-        socklen_t l;
-        int r;
-
-        if (family != 0 && family != AF_INET && family != AF_INET6)
-                return -EINVAL;
-
-        if ((r = sd_is_socket_internal(fd, type, listening)) <= 0)
-                return r;
-
-        memset(&sockaddr, 0, sizeof(sockaddr));
-        l = sizeof(sockaddr);
-
-        if (getsockname(fd, &sockaddr.sa, &l) < 0)
-                return -errno;
-
-        if (l < sizeof(sa_family_t))
-                return -EINVAL;
-
-        if (sockaddr.sa.sa_family != AF_INET &&
-            sockaddr.sa.sa_family != AF_INET6)
-                return 0;
-
-        if (family > 0)
-                if (sockaddr.sa.sa_family != family)
-                        return 0;
-
-        if (port > 0) {
-                if (sockaddr.sa.sa_family == AF_INET) {
-                        if (l < sizeof(struct sockaddr_in))
-                                return -EINVAL;
-
-                        return htons(port) == sockaddr.in4.sin_port;
-                } else {
-                        if (l < sizeof(struct sockaddr_in6))
-                                return -EINVAL;
-
-                        return htons(port) == sockaddr.in6.sin6_port;
-                }
-        }
-
-        return 1;
-}
-
-_sd_export_ int sd_is_socket_unix(int fd, int type, int listening, const char *path, size_t length) {
-        union sockaddr_union sockaddr;
-        socklen_t l;
-        int r;
-
-        if ((r = sd_is_socket_internal(fd, type, listening)) <= 0)
-                return r;
-
-        memset(&sockaddr, 0, sizeof(sockaddr));
-        l = sizeof(sockaddr);
-
-        if (getsockname(fd, &sockaddr.sa, &l) < 0)
-                return -errno;
-
-        if (l < sizeof(sa_family_t))
-                return -EINVAL;
-
-        if (sockaddr.sa.sa_family != AF_UNIX)
-                return 0;
-
-        if (path) {
-                if (length <= 0)
-                        length = strlen(path);
-
-                if (length <= 0)
-                        /* Unnamed socket */
-                        return l == offsetof(struct sockaddr_un, sun_path);
-
-                if (path[0])
-                        /* Normal path socket */
-                        return
-                                (l >= offsetof(struct sockaddr_un, sun_path) + length + 1) &&
-                                memcmp(path, sockaddr.un.sun_path, length+1) == 0;
-                else
-                        /* Abstract namespace socket */
-                        return
-                                (l == offsetof(struct sockaddr_un, sun_path) + length) &&
-                                memcmp(path, sockaddr.un.sun_path, length) == 0;
-        }
-
-        return 1;
-}
-
-_sd_export_ int sd_is_mq(int fd, const char *path) {
-#if !defined(__linux__)
-        return 0;
-#else
-        struct mq_attr attr;
-
-        if (fd < 0)
-                return -EINVAL;
-
-        if (mq_getattr(fd, &attr) < 0)
-                return -errno;
-
-        if (path) {
-                char fpath[PATH_MAX];
-                struct stat a, b;
-
-                if (path[0] != '/')
-                        return -EINVAL;
-
-                if (fstat(fd, &a) < 0)
-                        return -errno;
-
-                strncpy(stpcpy(fpath, "/dev/mqueue"), path, sizeof(fpath) - 12);
-                fpath[sizeof(fpath)-1] = 0;
-
-                if (stat(fpath, &b) < 0)
-                        return -errno;
-
-                if (a.st_dev != b.st_dev ||
-                    a.st_ino != b.st_ino)
-                        return 0;
-        }
-
-        return 1;
-#endif
-}
-
-_sd_export_ int sd_notify(int unset_environment, const char *state) {
-#if defined(DISABLE_SYSTEMD) || !defined(__linux__) || !defined(SOCK_CLOEXEC)
-        return 0;
-#else
-        int fd = -1, r;
-        struct msghdr msghdr;
-        struct iovec iovec;
-        union sockaddr_union sockaddr;
-        const char *e;
-
-        if (!state) {
-                r = -EINVAL;
-                goto finish;
-        }
-
-        if (!(e = getenv("NOTIFY_SOCKET")))
-                return 0;
-
-        /* Must be an abstract socket, or an absolute path */
-        if ((e[0] != '@' && e[0] != '/') || e[1] == 0) {
-                r = -EINVAL;
-                goto finish;
-        }
-
-        if ((fd = socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0)) < 0) {
-                r = -errno;
-                goto finish;
-        }
-
-        memset(&sockaddr, 0, sizeof(sockaddr));
-        sockaddr.sa.sa_family = AF_UNIX;
-        strncpy(sockaddr.un.sun_path, e, sizeof(sockaddr.un.sun_path));
-
-        if (sockaddr.un.sun_path[0] == '@')
-                sockaddr.un.sun_path[0] = 0;
-
-        memset(&iovec, 0, sizeof(iovec));
-        iovec.iov_base = (char*) state;
-        iovec.iov_len = strlen(state);
-
-        memset(&msghdr, 0, sizeof(msghdr));
-        msghdr.msg_name = &sockaddr;
-        msghdr.msg_namelen = offsetof(struct sockaddr_un, sun_path) + strlen(e);
-
-        if (msghdr.msg_namelen > sizeof(struct sockaddr_un))
-                msghdr.msg_namelen = sizeof(struct sockaddr_un);
-
-        msghdr.msg_iov = &iovec;
-        msghdr.msg_iovlen = 1;
-
-        if (sendmsg(fd, &msghdr, MSG_NOSIGNAL) < 0) {
-                r = -errno;
-                goto finish;
-        }
-
-        r = 1;
-
-finish:
-        if (unset_environment)
-                unsetenv("NOTIFY_SOCKET");
-
-        if (fd >= 0)
-                close(fd);
-
-        return r;
-#endif
-}
-
-_sd_export_ int sd_notifyf(int unset_environment, const char *format, ...) {
-#if defined(DISABLE_SYSTEMD) || !defined(__linux__)
-        return 0;
-#else
-        va_list ap;
-        char *p = NULL;
-        int r;
-
-        va_start(ap, format);
-        r = vasprintf(&p, format, ap);
-        va_end(ap);
-
-        if (r < 0 || !p)
-                return -ENOMEM;
-
-        r = sd_notify(unset_environment, p);
-        free(p);
-
-        return r;
-#endif
-}
-
-_sd_export_ int sd_booted(void) {
-#if defined(DISABLE_SYSTEMD) || !defined(__linux__)
-        return 0;
-#else
-
-        struct stat a, b;
-
-        /* We simply test whether the systemd cgroup hierarchy is
-         * mounted */
-
-        if (lstat("/sys/fs/cgroup", &a) < 0)
-                return 0;
-
-        if (lstat("/sys/fs/cgroup/systemd", &b) < 0)
-                return 0;
-
-        return a.st_dev != b.st_dev;
-#endif
-}
diff --git a/src/udev/src/sd-daemon.h b/src/udev/src/sd-daemon.h
deleted file mode 100644
index fe51159ee..000000000
--- a/src/udev/src/sd-daemon.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
-
-#ifndef foosddaemonhfoo
-#define foosddaemonhfoo
-
-/***
-  Copyright 2010 Lennart Poettering
-
-  Permission is hereby granted, free of charge, to any person
-  obtaining a copy of this software and associated documentation files
-  (the "Software"), to deal in the Software without restriction,
-  including without limitation the rights to use, copy, modify, merge,
-  publish, distribute, sublicense, and/or sell copies of the Software,
-  and to permit persons to whom the Software is furnished to do so,
-  subject to the following conditions:
-
-  The above copyright notice and this permission notice shall be
-  included in all copies or substantial portions of the Software.
-
-  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-  NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
-  BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
-  ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-  CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-  SOFTWARE.
-***/
-
-#include <sys/types.h>
-#include <inttypes.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
-  Reference implementation of a few systemd related interfaces for
-  writing daemons. These interfaces are trivial to implement. To
-  simplify porting we provide this reference implementation.
-  Applications are welcome to reimplement the algorithms described
-  here if they do not want to include these two source files.
-
-  The following functionality is provided:
-
-  - Support for logging with log levels on stderr
-  - File descriptor passing for socket-based activation
-  - Daemon startup and status notification
-  - Detection of systemd boots
-
-  You may compile this with -DDISABLE_SYSTEMD to disable systemd
-  support. This makes all those calls NOPs that are directly related to
-  systemd (i.e. only sd_is_xxx() will stay useful).
-
-  Since this is drop-in code we don't want any of our symbols to be
-  exported in any case. Hence we declare hidden visibility for all of
-  them.
-
-  You may find an up-to-date version of these source files online:
-
-  http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-daemon.h
-  http://cgit.freedesktop.org/systemd/systemd/plain/src/sd-daemon.c
-
-  This should compile on non-Linux systems, too, but with the
-  exception of the sd_is_xxx() calls all functions will become NOPs.
-
-  See sd-daemon(7) for more information.
-*/
-
-#ifndef _sd_printf_attr_
-#if __GNUC__ >= 4
-#define _sd_printf_attr_(a,b) __attribute__ ((format (printf, a, b)))
-#else
-#define _sd_printf_attr_(a,b)
-#endif
-#endif
-
-/*
-  Log levels for usage on stderr:
-
-          fprintf(stderr, SD_NOTICE "Hello World!\n");
-
-  This is similar to printk() usage in the kernel.
-*/
-#define SD_EMERG   "<0>"  /* system is unusable */
-#define SD_ALERT   "<1>"  /* action must be taken immediately */
-#define SD_CRIT    "<2>"  /* critical conditions */
-#define SD_ERR     "<3>"  /* error conditions */
-#define SD_WARNING "<4>"  /* warning conditions */
-#define SD_NOTICE  "<5>"  /* normal but significant condition */
-#define SD_INFO    "<6>"  /* informational */
-#define SD_DEBUG   "<7>"  /* debug-level messages */
-
-/* The first passed file descriptor is fd 3 */
-#define SD_LISTEN_FDS_START 3
-
-/*
-  Returns how many file descriptors have been passed, or a negative
-  errno code on failure. Optionally, removes the $LISTEN_FDS and
-  $LISTEN_PID file descriptors from the environment (recommended, but
-  problematic in threaded environments). If r is the return value of
-  this function you'll find the file descriptors passed as fds
-  SD_LISTEN_FDS_START to SD_LISTEN_FDS_START+r-1. Returns a negative
-  errno style error code on failure. This function call ensures that
-  the FD_CLOEXEC flag is set for the passed file descriptors, to make
-  sure they are not passed on to child processes. If FD_CLOEXEC shall
-  not be set, the caller needs to unset it after this call for all file
-  descriptors that are used.
-
-  See sd_listen_fds(3) for more information.
-*/
-int sd_listen_fds(int unset_environment);
-
-/*
-  Helper call for identifying a passed file descriptor. Returns 1 if
-  the file descriptor is a FIFO in the file system stored under the
-  specified path, 0 otherwise. If path is NULL a path name check will
-  not be done and the call only verifies if the file descriptor
-  refers to a FIFO. Returns a negative errno style error code on
-  failure.
-
-  See sd_is_fifo(3) for more information.
-*/
-int sd_is_fifo(int fd, const char *path);
-
-/*
-  Helper call for identifying a passed file descriptor. Returns 1 if
-  the file descriptor is a special character device on the file
-  system stored under the specified path, 0 otherwise.
-  If path is NULL a path name check will not be done and the call
-  only verifies if the file descriptor refers to a special character.
-  Returns a negative errno style error code on failure.
-
-  See sd_is_special(3) for more information.
-*/
-int sd_is_special(int fd, const char *path);
-
-/*
-  Helper call for identifying a passed file descriptor. Returns 1 if
-  the file descriptor is a socket of the specified family (AF_INET,
-  ...) and type (SOCK_DGRAM, SOCK_STREAM, ...), 0 otherwise. If
-  family is 0 a socket family check will not be done. If type is 0 a
-  socket type check will not be done and the call only verifies if
-  the file descriptor refers to a socket. If listening is > 0 it is
-  verified that the socket is in listening mode. (i.e. listen() has
-  been called) If listening is == 0 it is verified that the socket is
-  not in listening mode. If listening is < 0 no listening mode check
-  is done. Returns a negative errno style error code on failure.
-
-  See sd_is_socket(3) for more information.
-*/
-int sd_is_socket(int fd, int family, int type, int listening);
-
-/*
-  Helper call for identifying a passed file descriptor. Returns 1 if
-  the file descriptor is an Internet socket, of the specified family
-  (either AF_INET or AF_INET6) and the specified type (SOCK_DGRAM,
-  SOCK_STREAM, ...), 0 otherwise. If version is 0 a protocol version
-  check is not done. If type is 0 a socket type check will not be
-  done. If port is 0 a socket port check will not be done. The
-  listening flag is used the same way as in sd_is_socket(). Returns a
-  negative errno style error code on failure.
-
-  See sd_is_socket_inet(3) for more information.
-*/
-int sd_is_socket_inet(int fd, int family, int type, int listening, uint16_t port);
-
-/*
-  Helper call for identifying a passed file descriptor. Returns 1 if
-  the file descriptor is an AF_UNIX socket of the specified type
-  (SOCK_DGRAM, SOCK_STREAM, ...) and path, 0 otherwise. If type is 0
-  a socket type check will not be done. If path is NULL a socket path
-  check will not be done. For normal AF_UNIX sockets set length to
-  0. For abstract namespace sockets set length to the length of the
-  socket name (including the initial 0 byte), and pass the full
-  socket path in path (including the initial 0 byte). The listening
-  flag is used the same way as in sd_is_socket(). Returns a negative
-  errno style error code on failure.
-
-  See sd_is_socket_unix(3) for more information.
-*/
-int sd_is_socket_unix(int fd, int type, int listening, const char *path, size_t length);
-
-/*
-  Helper call for identifying a passed file descriptor. Returns 1 if
-  the file descriptor is a POSIX Message Queue of the specified name,
-  0 otherwise. If path is NULL a message queue name check is not
-  done. Returns a negative errno style error code on failure.
-*/
-int sd_is_mq(int fd, const char *path);
-
-/*
-  Informs systemd about changed daemon state. This takes a number of
-  newline separated environment-style variable assignments in a
-  string. The following variables are known:
-
-     READY=1      Tells systemd that daemon startup is finished (only
-                  relevant for services of Type=notify). The passed
-                  argument is a boolean "1" or "0". Since there is
-                  little value in signaling non-readiness the only
-                  value daemons should send is "READY=1".
-
-     STATUS=...   Passes a single-line status string back to systemd
-                  that describes the daemon state. This is free-from
-                  and can be used for various purposes: general state
-                  feedback, fsck-like programs could pass completion
-                  percentages and failing programs could pass a human
-                  readable error message. Example: "STATUS=Completed
-                  66% of file system check..."
-
-     ERRNO=...    If a daemon fails, the errno-style error code,
-                  formatted as string. Example: "ERRNO=2" for ENOENT.
-
-     BUSERROR=... If a daemon fails, the D-Bus error-style error
-                  code. Example: "BUSERROR=org.freedesktop.DBus.Error.TimedOut"
-
-     MAINPID=...  The main pid of a daemon, in case systemd did not
-                  fork off the process itself. Example: "MAINPID=4711"
-
-     WATCHDOG=1   Tells systemd to update the watchdog timestamp.
-                  Services using this feature should do this in
-                  regular intervals. A watchdog framework can use the
-                  timestamps to detect failed services.
-
-  Daemons can choose to send additional variables. However, it is
-  recommended to prefix variable names not listed above with X_.
-
-  Returns a negative errno-style error code on failure. Returns > 0
-  if systemd could be notified, 0 if it couldn't possibly because
-  systemd is not running.
-
-  Example: When a daemon finished starting up, it could issue this
-  call to notify systemd about it:
-
-     sd_notify(0, "READY=1");
-
-  See sd_notifyf() for more complete examples.
-
-  See sd_notify(3) for more information.
-*/
-int sd_notify(int unset_environment, const char *state);
-
-/*
-  Similar to sd_notify() but takes a format string.
-
-  Example 1: A daemon could send the following after initialization:
-
-     sd_notifyf(0, "READY=1\n"
-                   "STATUS=Processing requests...\n"
-                   "MAINPID=%lu",
-                   (unsigned long) getpid());
-
-  Example 2: A daemon could send the following shortly before
-  exiting, on failure:
-
-     sd_notifyf(0, "STATUS=Failed to start up: %s\n"
-                   "ERRNO=%i",
-                   strerror(errno),
-                   errno);
-
-  See sd_notifyf(3) for more information.
-*/
-int sd_notifyf(int unset_environment, const char *format, ...) _sd_printf_attr_(2,3);
-
-/*
-  Returns > 0 if the system was booted with systemd. Returns < 0 on
-  error. Returns 0 if the system was not booted with systemd. Note
-  that all of the functions above handle non-systemd boots just
-  fine. You should NOT protect them with a call to this function. Also
-  note that this function checks whether the system, not the user
-  session is controlled by systemd. However the functions above work
-  for both user and system services.
-
-  See sd_booted(3) for more information.
-*/
-int sd_booted(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/src/udev/src/udev-control.socket b/src/udev/src/udev-control.socket
deleted file mode 100644
index f80f77442..000000000
--- a/src/udev/src/udev-control.socket
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Description=udev Control Socket
-DefaultDependencies=no
-ConditionCapability=CAP_MKNOD
-
-[Socket]
-Service=udev.service
-ListenSequentialPacket=/run/udev/control
-SocketMode=0600
-PassCredentials=yes
diff --git a/src/udev/src/udev-kernel.socket b/src/udev/src/udev-kernel.socket
deleted file mode 100644
index 23fa9d5e1..000000000
--- a/src/udev/src/udev-kernel.socket
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Description=udev Kernel Socket
-DefaultDependencies=no
-ConditionCapability=CAP_MKNOD
-
-[Socket]
-Service=udev.service
-ReceiveBuffer=134217728
-ListenNetlink=kobject-uevent 1
-PassCredentials=yes
diff --git a/src/udev/src/udev-settle.service.in b/src/udev/src/udev-settle.service.in
deleted file mode 100644
index b0a4964f7..000000000
--- a/src/udev/src/udev-settle.service.in
+++ /dev/null
@@ -1,25 +0,0 @@
-# This service is usually not enabled by default. If enabled, it
-# acts as a barrier for basic.target -- so all later services will
-# wait for udev completely finishing its coldplug run.
-#
-# If needed, to work around broken or non-hotplug-aware services,
-# it might be enabled unconditionally, or pulled-in on-demand by
-# the services that assume a fully populated /dev at startup. It
-# should not be used or pulled-in ever on systems without such
-# legacy services running.
-
-[Unit]
-Description=udev Wait for Complete Device Initialization
-DefaultDependencies=no
-Wants=udev.service
-After=udev-trigger.service
-Before=basic.target
-
-[Service]
-Type=oneshot
-TimeoutSec=180
-RemainAfterExit=yes
-ExecStart=@bindir@/udevadm settle
-
-[Install]
-WantedBy=basic.target
diff --git a/src/udev/src/udev-trigger.service.in b/src/udev/src/udev-trigger.service.in
deleted file mode 100644
index cd81945c8..000000000
--- a/src/udev/src/udev-trigger.service.in
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Description=udev Coldplug all Devices
-Wants=udev.service
-After=udev-kernel.socket udev-control.socket
-DefaultDependencies=no
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-ExecStart=@bindir@/udevadm trigger --type=subsystems --action=add ; @bindir@/udevadm trigger --type=devices --action=add
diff --git a/src/udev/src/udev.service.in b/src/udev/src/udev.service.in
deleted file mode 100644
index c27eb1baf..000000000
--- a/src/udev/src/udev.service.in
+++ /dev/null
@@ -1,14 +0,0 @@
-[Unit]
-Description=udev Kernel Device Manager
-Wants=udev-control.socket udev-kernel.socket
-After=udev-control.socket udev-kernel.socket
-Before=basic.target
-DefaultDependencies=no
-ConditionCapability=CAP_MKNOD
-
-[Service]
-Type=notify
-OOMScoreAdjust=-1000
-Sockets=udev-control.socket udev-kernel.socket
-Restart=on-failure
-ExecStart=@pkglibexecdir@/udevd
diff --git a/src/udev/src/udev.xml b/src/udev/src/udev.xml
deleted file mode 100644
index 8eb583a82..000000000
--- a/src/udev/src/udev.xml
+++ /dev/null
@@ -1,695 +0,0 @@
-<?xml version='1.0'?>
-<?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?>
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
-
-<refentry id="udev">
-  <refentryinfo>
-    <title>udev</title>
-    <productname>udev</productname>
-  </refentryinfo>
-
-  <refmeta>
-    <refentrytitle>udev</refentrytitle>
-    <manvolnum>7</manvolnum>
-  </refmeta>
-
-  <refnamediv>
-    <refname>udev</refname>
-    <refpurpose>Linux dynamic device management</refpurpose>
-  </refnamediv>
-
-  <refsect1><title>Description</title>
-    <para>udev supplies the system software with device events, manages permissions
-    of device nodes and may create additional symlinks in the <filename>/dev</filename>
-    directory, or renames network interfaces. The kernel usually just assigns unpredictable
-    device names based on the order of discovery. Meaningful symlinks or network device
-    names provide a way to reliably identify devices based on their properties or
-    current configuration.</para>
-
-    <para>The udev daemon, <citerefentry><refentrytitle>udevd</refentrytitle>
-    <manvolnum>8</manvolnum></citerefentry>, receives device uevents directly from
-    the kernel whenever a device is added or removed from the system, or it changes its
-    state. When udev receives a device event, it matches its configured set of rules
-    against various device attributes to identify the device. Rules that match may
-    provide additional device information to be stored in the udev database or
-    to be used to create meaningful symlink names.</para>
-
-    <para>All device information udev processes is stored in the udev database and
-    sent out to possible event subscribers. Access to all stored data and the event
-    sources is provided by the library libudev.</para>
-  </refsect1>
-
-  <refsect1><title>Configuration</title>
-    <para>udev configuration files are placed in <filename>/etc/udev</filename>
-    and <filename>/usr/lib/udev</filename>. All empty lines or lines beginning with
-    '#' are ignored.</para>
-
-    <refsect2><title>Configuration file</title>
-      <para>udev expects its main configuration file at <filename>/etc/udev/udev.conf</filename>.
-      It consists of a set of variables allowing the user to override default udev values.
-      The following variables can be set:</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>udev_root</option></term>
-          <listitem>
-            <para>Specifies where to place the device nodes in the filesystem.
-            The default value is <filename>/dev</filename>.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>udev_log</option></term>
-          <listitem>
-            <para>The logging priority. Valid values are the numerical syslog priorities
-            or their textual representations: <option>err</option>, <option>info</option>
-            and <option>debug</option>.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-
-    <refsect2><title>Rules files</title>
-      <para>The udev rules are read from the files located in the
-      system rules directory <filename>/usr/lib/udev/rules.d</filename>,
-      the volatile runtime directory <filename>/run/udev/rules.d</filename>
-      and the local administration directory <filename>/etc/udev/rules.d</filename>.
-      All rules files are collectively sorted and processed in lexical order,
-      regardless of the directories in which they live. However, files with
-      identical file names replace each other. Files in <filename>/etc</filename>
-      have the highest priority, files in <filename>/run</filename> take precedence
-      over files with the same name in <filename>/lib</filename>. This can be
-      used to override a system-supplied rules file with a local file if needed;
-      a symlink in <filename>/etc</filename> with the same name as a rules file in
-      <filename>/lib</filename>, pointing to <filename>/dev/null</filename>,
-      disables the rules file entirely.</para>
-
-      <para>Rule files must have the extension <filename>.rules</filename>; other
-      extensions are ignored.</para>
-
-      <para>Every line in the rules file contains at least one key-value pair.
-      There are two kind of keys: match and assignment.
-      If all match keys are matching against its value, the rule gets applied and the
-      assignment keys get the specified value assigned.</para>
-
-      <para>A matching rule may rename a network interface, add symlinks
-      pointing to the device node, or run a specified program as part of
-      the event handling.</para>
-
-      <para>A rule consists of a comma-separated list of one or more key-value pairs.
-      Each key has a distinct operation, depending on the used operator. Valid
-      operators are:</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>==</option></term>
-          <listitem>
-            <para>Compare for equality.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>!=</option></term>
-          <listitem>
-            <para>Compare for inequality.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>=</option></term>
-          <listitem>
-            <para>Assign a value to a key. Keys that represent a list are reset
-            and only this single value is assigned.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>+=</option></term>
-          <listitem>
-            <para>Add the value to a key that holds a list of entries.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>:=</option></term>
-          <listitem>
-            <para>Assign  a  value  to  a key finally; disallow any later changes.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-
-      <para>The following key names can be used to match against device properties.
-      Some of the keys also match against properties of the parent devices in sysfs,
-      not only the device that has generated the event. If multiple keys that match
-      a parent device are specified in a single rule, all these keys must match at
-      one and the same parent device.</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>ACTION</option></term>
-          <listitem>
-            <para>Match the name of the event action.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>DEVPATH</option></term>
-          <listitem>
-            <para>Match the devpath of the event device.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>KERNEL</option></term>
-          <listitem>
-            <para>Match the name of the event device.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>NAME</option></term>
-          <listitem>
-            <para>Match the name of a network interface. It can be used once the
-            NAME key has been set in one of the preceding rules.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>SYMLINK</option></term>
-          <listitem>
-            <para>Match the name of a symlink targeting the node. It can
-            be used once a SYMLINK key has been set in one of the preceding
-            rules. There may be multiple symlinks; only one needs to match.
-            </para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>SUBSYSTEM</option></term>
-          <listitem>
-            <para>Match the subsystem of the event device.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>DRIVER</option></term>
-          <listitem>
-            <para>Match the driver name of the event device. Only set this key for devices
-            which are bound to a driver at the time the event is generated.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>ATTR{<replaceable>filename</replaceable>}</option></term>
-          <listitem>
-            <para>Match sysfs attribute values of the event device. Trailing
-            whitespace in the attribute values is ignored unless the specified match
-            value itself contains trailing whitespace.
-            </para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>KERNELS</option></term>
-          <listitem>
-            <para>Search the devpath upwards for a matching device name.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>SUBSYSTEMS</option></term>
-          <listitem>
-            <para>Search the devpath upwards for a matching device subsystem name.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>DRIVERS</option></term>
-          <listitem>
-            <para>Search the devpath upwards for a matching device driver name.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>ATTRS{<replaceable>filename</replaceable>}</option></term>
-          <listitem>
-            <para>Search the devpath upwards for a device with matching sysfs attribute values.
-            If multiple <option>ATTRS</option> matches are specified, all of them
-            must match on the same device. Trailing whitespace in the attribute values is ignored
-            unless the specified match value itself contains trailing whitespace.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>TAGS</option></term>
-          <listitem>
-            <para>Search the devpath upwards for a device with matching tag.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>ENV{<replaceable>key</replaceable>}</option></term>
-          <listitem>
-            <para>Match against a device property value.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>TAG</option></term>
-          <listitem>
-            <para>Match against a device tag.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>TEST{<replaceable>octal mode mask</replaceable>}</option></term>
-          <listitem>
-            <para>Test the existence of a file. An octal mode mask can be specified
-            if needed.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>PROGRAM</option></term>
-          <listitem>
-            <para>Execute a program to determine whether there
-            is a match; the key is true if the program returns
-            successfully. The device properties are made available to the
-            executed program in the environment. The program's stdout
-            is available in the RESULT key.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>RESULT</option></term>
-          <listitem>
-            <para>Match the returned string of the last PROGRAM call. This key can
-            be used in the same or in any later rule after a PROGRAM call.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-
-      <para>Most of the fields support shell-style pattern matching. The following
-      pattern characters are supported:</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>*</option></term>
-          <listitem>
-            <para>Matches zero or more characters.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>?</option></term>
-          <listitem>
-            <para>Matches any single character.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>[]</option></term>
-          <listitem>
-            <para>Matches any single character specified within the brackets. For
-            example, the pattern string 'tty[SR]' would match either 'ttyS' or 'ttyR'.
-            Ranges are also supported via the '-' character.
-            For example, to match on the range of all digits, the pattern [0-9] could
-            be used. If the first character following the '[' is a '!', any characters
-            not enclosed are matched.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-
-      <para>The following keys can get values assigned:</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>NAME</option></term>
-          <listitem>
-            <para>The name to use for a network interface. The name of a device node
-            can not be changed by udev, only additional symlinks can be created.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>SYMLINK</option></term>
-          <listitem>
-            <para>The name of a symlink targeting the node. Every matching rule adds
-            this value to the list of symlinks to be created. Multiple symlinks may be
-            specified by separating the names by the space character. In case multiple
-            devices claim the same name, the link always points to the device with
-            the highest link_priority. If the current device goes away, the links are
-            re-evaluated and the device with the next highest link_priority becomes the owner of
-            the link. If no link_priority is specified, the order of the devices (and
-            which one of them owns the link) is undefined. Also, symlink names must
-            never conflict with the kernel's default device node names, as that would
-            result in unpredictable behavior.
-            </para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>OWNER, GROUP, MODE</option></term>
-          <listitem>
-            <para>The permissions for the device node. Every specified value overrides
-            the compiled-in default value.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>ATTR{<replaceable>key</replaceable>}</option></term>
-          <listitem>
-            <para>The value that should be written to a sysfs attribute of the
-            event device.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>ENV{<replaceable>key</replaceable>}</option></term>
-          <listitem>
-            <para>Set a device property value. Property names with a leading '.'
-            are neither stored in the database nor exported to events or
-            external tools (run by, say, the PROGRAM match key).</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>TAG</option></term>
-          <listitem>
-            <para>Attach a tag to a device. This is used to filter events for users
-            of libudev's monitor functionality, or to enumerate a group of tagged
-            devices. The implementation can only work efficiently if only a few
-            tags are attached to a device. It is only meant to be used in
-            contexts with specific device filter requirements, and not as a
-            general-purpose flag. Excessive use might result in inefficient event
-            handling.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>RUN</option></term>
-          <listitem>
-            <para>Add a program to the list of programs to be executed for a specific
-            device.</para>
-            <para>If no absolute path is given, the program is expected to live in
-            /usr/lib/udev, otherwise the absolute path must be specified. The program
-            name and following arguments are separated by spaces. Single quotes can
-            be used to specify arguments with spaces.</para>
-            <para>This can only be used for very short running tasks. Running an
-            event process for a long period of time may block all further events for
-            this or a dependent device. Starting daemons or other long running processes
-            is not appropriate for udev.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>LABEL</option></term>
-          <listitem>
-            <para>A named label to which a GOTO may jump.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>GOTO</option></term>
-          <listitem>
-            <para>Jumps to the next LABEL with a matching name.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>IMPORT{<replaceable>type</replaceable>}</option></term>
-          <listitem>
-            <para>Import a set of variables as device properties,
-            depending on <replaceable>type</replaceable>:</para>
-            <variablelist>
-              <varlistentry>
-                <term><option>program</option></term>
-                <listitem>
-                  <para>Execute an external program specified as the assigned value and
-                  import its output, which must be in environment key
-                  format. Path specification, command/argument separation,
-                  and quoting work like in <option>RUN</option>.</para>
-                </listitem>
-              </varlistentry>
-              <varlistentry>
-                <term><option>file</option></term>
-                <listitem>
-                  <para>Import a text file specified as the assigned value, the content
-                  of which must be in environment key format.</para>
-                </listitem>
-              </varlistentry>
-              <varlistentry>
-                <term><option>db</option></term>
-                <listitem>
-                  <para>Import a single property specified as the assigned value from the
-                  current device database. This works only if the database is already populated
-                  by an earlier event.</para>
-                </listitem>
-              </varlistentry>
-              <varlistentry>
-                <term><option>cmdline</option></term>
-                <listitem>
-                  <para>Import a single property from the kernel command line. For simple flags
-                  the value of the property is set to '1'.</para>
-                </listitem>
-              </varlistentry>
-              <varlistentry>
-                <term><option>parent</option></term>
-                <listitem>
-                  <para>Import the stored keys from the parent device by reading
-                  the database entry of the parent device. The value assigned to
-                  <option>IMPORT{parent}</option> is used as a filter of key names
-                  to import (with the same shell-style pattern matching used for
-                  comparisons).</para>
-                </listitem>
-              </varlistentry>
-            </variablelist>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>WAIT_FOR</option></term>
-          <listitem>
-            <para>Wait for a file to become available or until a timeout of
-            10 seconds expires. The path is relative to the sysfs device;
-            if no path is specified, this waits for an attribute to appear.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>OPTIONS</option></term>
-          <listitem>
-            <para>Rule and device options:</para>
-            <variablelist>
-              <varlistentry>
-                <term><option>link_priority=<replaceable>value</replaceable></option></term>
-                <listitem>
-                  <para>Specify the priority of the created symlinks. Devices with higher
-                  priorities overwrite existing symlinks of other devices. The default is 0.</para>
-                </listitem>
-              </varlistentry>
-              <varlistentry>
-                <term><option>event_timeout=</option></term>
-                <listitem>
-                  <para>Number of seconds an event waits for operations to finish before
-                  giving up and terminating itself.</para>
-                </listitem>
-              </varlistentry>
-              <varlistentry>
-                <term><option>string_escape=<replaceable>none|replace</replaceable></option></term>
-                <listitem>
-                  <para>Usually control and other possibly unsafe characters are replaced
-                  in strings used for device naming. The mode of replacement can be specified
-                  with this option.</para>
-                </listitem>
-              </varlistentry>
-              <varlistentry>
-                <term><option>static_node=</option></term>
-                <listitem>
-                  <para>Apply the permissions specified in this rule to the static device node with
-                  the specified name. Static device nodes might be provided by kernel modules
-                  or copied from <filename>/usr/lib/udev/devices</filename>. These nodes might not have
-                  a corresponding kernel device at the time udevd is started; they can trigger
-                  automatic kernel module loading.</para>
-                </listitem>
-              </varlistentry>
-              <varlistentry>
-                <term><option>watch</option></term>
-                <listitem>
-                  <para>Watch the device node with inotify; when the node is closed after being opened for
-                  writing, a change uevent is synthesized.</para>
-                </listitem>
-              </varlistentry>
-              <varlistentry>
-                <term><option>nowatch</option></term>
-                <listitem>
-                  <para>Disable the watching of a device node with inotify.</para>
-                </listitem>
-              </varlistentry>
-            </variablelist>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-
-      <para>The <option>NAME</option>, <option>SYMLINK</option>, <option>PROGRAM</option>,
-      <option>OWNER</option>, <option>GROUP</option>, <option>MODE</option>  and  <option>RUN</option>
-      fields support simple string substitutions. The <option>RUN</option>
-      substitutions are performed after all rules have been processed, right before the program
-      is executed, allowing for the use of device properties set by earlier matching
-      rules. For all other fields, substitutions are performed while the individual rule is
-      being processed. The available substitutions are:</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>$kernel</option>, <option>%k</option></term>
-          <listitem>
-            <para>The kernel name for this device.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$number</option>, <option>%n</option></term>
-          <listitem>
-            <para>The kernel number for this device. For example, 'sda3' has
-            kernel number of '3'</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$devpath</option>, <option>%p</option></term>
-          <listitem>
-            <para>The devpath of the device.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$id</option>, <option>%b</option></term>
-          <listitem>
-            <para>The name of the device matched while searching the devpath upwards for
-              <option>SUBSYSTEMS</option>, <option>KERNELS</option>, <option>DRIVERS</option> and <option>ATTRS</option>.
-            </para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$driver</option></term>
-          <listitem>
-            <para>The driver name of the device matched while searching the devpath upwards for
-              <option>SUBSYSTEMS</option>, <option>KERNELS</option>, <option>DRIVERS</option> and <option>ATTRS</option>.
-            </para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$attr{<replaceable>file</replaceable>}</option>, <option>%s{<replaceable>file</replaceable>}</option></term>
-          <listitem>
-            <para>The value of a sysfs attribute found at the device where
-            all keys of the rule have matched. If the matching device does not have
-            such an attribute, and a previous KERNELS, SUBSYSTEMS, DRIVERS, or
-            ATTRS test selected a parent device, then the attribute from that
-            parent device is used.</para>
-            <para>If the attribute is a symlink, the last element of the symlink target is
-            returned as the value.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$env{<replaceable>key</replaceable>}</option>, <option>%E{<replaceable>key</replaceable>}</option></term>
-          <listitem>
-            <para>A device property value.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$major</option>, <option>%M</option></term>
-          <listitem>
-            <para>The kernel major number for the device.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$minor</option>, <option>%m</option></term>
-          <listitem>
-            <para>The kernel minor number for the device.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$result</option>, <option>%c</option></term>
-          <listitem>
-            <para>The string returned by the external program requested with PROGRAM.
-            A single part of the string, separated by a space character, may be selected
-            by specifying the part number as an attribute: <option>%c{N}</option>.
-            If the number is followed by the '+' character, this part plus all remaining parts
-            of the result string are substituted: <option>%c{N+}</option></para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$parent</option>, <option>%P</option></term>
-          <listitem>
-            <para>The node name of the parent device.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$name</option></term>
-          <listitem>
-            <para>The current name of the device. If not changed by a rule, it is the
-            name of the kernel device.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$links</option></term>
-          <listitem>
-            <para>A space-separated list of the current symlinks. The value is
-            only set during a remove event or if an earlier rule assigned a value.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$root</option>, <option>%r</option></term>
-          <listitem>
-            <para>The udev_root value.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$sys</option>, <option>%S</option></term>
-          <listitem>
-            <para>The sysfs mount point.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$devnode</option>, <option>%N</option></term>
-          <listitem>
-            <para>The name of the device node.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>%%</option></term>
-          <listitem>
-          <para>The '%' character itself.</para>
-          </listitem>
-        </varlistentry>
-
-        <varlistentry>
-          <term><option>$$</option></term>
-          <listitem>
-          <para>The '$' character itself.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-  </refsect1>
-
-  <refsect1><title>Author</title>
-    <para>Written by Greg Kroah-Hartman <email>greg@kroah.com</email> and
-    Kay Sievers <email>kay.sievers@vrfy.org</email>. With much help from
-    Dan Stekloff and many others.</para>
-  </refsect1>
-
-  <refsect1>
-    <title>See Also</title>
-    <para><citerefentry>
-        <refentrytitle>udevd</refentrytitle><manvolnum>8</manvolnum>
-      </citerefentry>,
-      <citerefentry>
-        <refentrytitle>udevadm</refentrytitle><manvolnum>8</manvolnum>
-    </citerefentry></para>
-  </refsect1>
-</refentry>
diff --git a/src/udev/src/udevadm.xml b/src/udev/src/udevadm.xml
deleted file mode 100644
index 455ce80ca..000000000
--- a/src/udev/src/udevadm.xml
+++ /dev/null
@@ -1,472 +0,0 @@
-<?xml version='1.0'?>
-<?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?>
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
-
-<refentry id="udevadm">
-  <refentryinfo>
-    <title>udevadm</title>
-    <productname>udev</productname>
-  </refentryinfo>
-
-  <refmeta>
-    <refentrytitle>udevadm</refentrytitle>
-    <manvolnum>8</manvolnum>
-    <refmiscinfo class="version"></refmiscinfo>
-  </refmeta>
-
-  <refnamediv>
-    <refname>udevadm</refname><refpurpose>udev management tool</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <cmdsynopsis>
-      <command>udevadm</command>
-        <arg><option>--debug</option></arg>
-        <arg><option>--version</option></arg>
-        <arg><option>--help</option></arg>
-    </cmdsynopsis>
-    <cmdsynopsis>
-      <command>udevadm info <replaceable>options</replaceable></command>
-    </cmdsynopsis>
-    <cmdsynopsis>
-      <command>udevadm trigger <optional>options</optional></command>
-    </cmdsynopsis>
-    <cmdsynopsis>
-      <command>udevadm settle <optional>options</optional></command>
-    </cmdsynopsis>
-    <cmdsynopsis>
-      <command>udevadm control <replaceable>command</replaceable></command>
-    </cmdsynopsis>
-    <cmdsynopsis>
-      <command>udevadm monitor <optional>options</optional></command>
-    </cmdsynopsis>
-    <cmdsynopsis>
-      <command>udevadm test <optional>options</optional> <replaceable>devpath</replaceable></command>
-    </cmdsynopsis>
-    <cmdsynopsis>
-      <command>udevadm test-builtin <optional>options</optional> <replaceable>command</replaceable> <replaceable>devpath</replaceable></command>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1><title>Description</title>
-    <para>udevadm expects a command and command specific options.  It
-    controls the runtime behavior of udev, requests kernel events,
-    manages the event queue, and provides simple debugging mechanisms.</para>
-  </refsect1>
-
-  <refsect1><title>OPTIONS</title>
-    <variablelist>
-      <varlistentry>
-        <term><option>--debug</option></term>
-        <listitem>
-          <para>Print debug messages to stderr.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>--version</option></term>
-        <listitem>
-          <para>Print version number.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>--help</option></term>
-        <listitem>
-          <para>Print help text.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-
-    <refsect2><title>udevadm info <replaceable>options</replaceable></title>
-      <para>Queries the udev database for device information
-      stored in the udev database. It can also query the properties
-      of a device from its sysfs representation to help creating udev
-      rules that match this device.</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>--query=<replaceable>type</replaceable></option></term>
-          <listitem>
-            <para>Query the database for specified type of device data. It needs the
-            <option>--path</option> or <option>--name</option> to identify the specified
-            device. Valid queries are:
-            <command>name</command>, <command>symlink</command>, <command>path</command>,
-            <command>property</command>, <command>all</command>.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--path=<replaceable>devpath</replaceable></option></term>
-          <listitem>
-            <para>The devpath of the device to query.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--name=<replaceable>file</replaceable></option></term>
-          <listitem>
-            <para>The name of the device node or a symlink to query</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--root</option></term>
-          <listitem>
-            <para>The udev root directory: <filename>/dev</filename>. If used in conjunction
-            with a <command>name</command> or <command>symlink</command> query, the
-            query returns the absolute path including the root directory.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--run</option></term>
-          <listitem>
-            <para>The udev runtime directory: <filename>/run/udev</filename>.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--attribute-walk</option></term>
-          <listitem>
-            <para>Print all sysfs properties of the specified device that can be used
-            in udev rules to match the specified device. It prints all devices
-            along the chain, up to the root of sysfs that can be used in udev rules.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--export</option></term>
-          <listitem>
-            <para>Print output as key/value pairs. Values are enclosed in single quotes.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--export-prefix=<replaceable>name</replaceable></option></term>
-          <listitem>
-            <para>Add a prefix to the key name of exported values.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--device-id-of-file=<replaceable>file</replaceable></option></term>
-          <listitem>
-            <para>Print major/minor numbers of the underlying device, where the file
-            lives on.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--export-db</option></term>
-          <listitem>
-            <para>Export the content of the udev database.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--cleanup-db</option></term>
-          <listitem>
-            <para>Cleanup the udev database.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--version</option></term>
-          <listitem>
-            <para>Print version.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--help</option></term>
-          <listitem>
-            <para>Print help text.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-
-    <refsect2><title>udevadm trigger <optional>options</optional></title>
-      <para>Request device events from the kernel. Primarily used to replay events at system coldplug time.</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>--verbose</option></term>
-          <listitem>
-            <para>Print the list of devices which will be triggered.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--dry-run</option></term>
-          <listitem>
-            <para>Do not actually trigger the event.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--type=<replaceable>type</replaceable></option></term>
-          <listitem>
-            <para>Trigger a specific type of devices. Valid types are:
-            <command>devices</command>, <command>subsystems</command>.
-            The default value is <command>devices</command>.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--action=<replaceable>action</replaceable></option></term>
-          <listitem>
-            <para>Type of event to be triggered. The default value is <command>change</command>.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--subsystem-match=<replaceable>subsystem</replaceable></option></term>
-          <listitem>
-            <para>Trigger events for devices which belong to a matching subsystem. This option
-            can be specified multiple times and supports shell style pattern matching.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--subsystem-nomatch=<replaceable>subsystem</replaceable></option></term>
-          <listitem>
-            <para>Do not trigger events for devices which belong to a matching subsystem. This option
-            can be specified multiple times and supports shell style pattern matching.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--attr-match=<replaceable>attribute</replaceable>=<replaceable>value</replaceable></option></term>
-          <listitem>
-            <para>Trigger events for devices with a matching sysfs attribute. If a value is specified
-            along with the attribute name, the content of the attribute is matched against the given
-            value using shell style pattern matching. If no value is specified, the existence of the
-            sysfs attribute is checked. This option can be specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--attr-nomatch=<replaceable>attribute</replaceable>=<replaceable>value</replaceable></option></term>
-          <listitem>
-            <para>Do not trigger events for devices with a matching sysfs attribute. If a value is
-            specified along with the attribute name, the content of the attribute is matched against
-            the given value using shell style pattern matching. If no value is specified, the existence
-            of the sysfs attribute is checked. This option can be specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--property-match=<replaceable>property</replaceable>=<replaceable>value</replaceable></option></term>
-          <listitem>
-            <para>Trigger events for devices with a matching property value. This option can be
-            specified multiple times and supports shell style pattern matching.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--tag-match=<replaceable>property</replaceable></option></term>
-          <listitem>
-            <para>Trigger events for devices with a matching tag. This option can be
-            specified multiple times.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--sysname-match=<replaceable>name</replaceable></option></term>
-          <listitem>
-            <para>Trigger events for devices with a matching sys device name. This option can be
-            specified multiple times and supports shell style pattern matching.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--parent-match=<replaceable>syspath</replaceable></option></term>
-          <listitem>
-            <para>Trigger events for all children of a given device.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-
-    <refsect2><title>udevadm settle <optional>options</optional></title>
-      <para>Watches the udev event queue, and exits if all current events are handled.</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>--timeout=<replaceable>seconds</replaceable></option></term>
-          <listitem>
-            <para>Maximum number of seconds to wait for the event queue to become empty.
-            The default value is 120 seconds. A value of 0 will check if the queue is empty
-            and always return immediately.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--seq-start=<replaceable>seqnum</replaceable></option></term>
-          <listitem>
-            <para>Wait only for events after the given sequence number.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--seq-end=<replaceable>seqnum</replaceable></option></term>
-          <listitem>
-            <para>Wait only for events before the given sequence number.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--exit-if-exists=<replaceable>file</replaceable></option></term>
-          <listitem>
-            <para>Stop waiting if file exists.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--quiet</option></term>
-          <listitem>
-            <para>Do not print any output, like the remaining queue entries when reaching the timeout.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--help</option></term>
-          <listitem>
-            <para>Print help text.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-
-    <refsect2><title>udevadm control <replaceable>command</replaceable></title>
-      <para>Modify the internal state of the running udev daemon.</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>--exit</option></term>
-          <listitem>
-            <para>Signal and wait for udevd to exit.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--log-priority=<replaceable>value</replaceable></option></term>
-          <listitem>
-            <para>Set the internal log level of udevd. Valid values are the numerical
-            syslog priorities or their textual representations: <option>err</option>,
-            <option>info</option> and <option>debug</option>.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--stop-exec-queue</option></term>
-          <listitem>
-            <para>Signal udevd to stop executing new events. Incoming events
-            will be queued.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--start-exec-queue</option></term>
-          <listitem>
-            <para>Signal udevd to enable the execution of events.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--reload</option></term>
-          <listitem>
-            <para>Signal udevd to reload the rules files and other databases like the kernel
-            module index. Reloading rules and databases does not apply any changes to already
-            existing devices; the new configuration will only be applied to new events.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--property=<replaceable>KEY</replaceable>=<replaceable>value</replaceable></option></term>
-          <listitem>
-            <para>Set a global property for all events.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--children-max=</option><replaceable>value</replaceable></term>
-          <listitem>
-            <para>Set the maximum number of events, udevd will handle at the
-            same time.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--timeout=</option><replaceable>seconds</replaceable></term>
-          <listitem>
-            <para>The maximum number seconds to wait for a reply from udevd.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--help</option></term>
-          <listitem>
-            <para>Print help text.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-
-    <refsect2><title>udevadm monitor <optional>options</optional></title>
-      <para>Listens to the kernel uevents and events sent out by a udev rule
-      and prints the devpath of the event to the console. It can be used to analyze the
-      event timing, by comparing the timestamps of the kernel uevent and the udev event.
-      </para>
-      <variablelist>
-        <varlistentry>
-          <term><option>--kernel</option></term>
-          <listitem>
-            <para>Print the kernel uevents.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--udev</option></term>
-          <listitem>
-            <para>Print the udev event after the rule processing.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--property</option></term>
-          <listitem>
-            <para>Also print the properties of the event.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--subsystem-match=<replaceable>string[/string]</replaceable></option></term>
-          <listitem>
-            <para>Filter events by subsystem[/devtype]. Only udev events with a matching subsystem value will pass.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--tag-match=<replaceable>string</replaceable></option></term>
-          <listitem>
-            <para>Filter events by property. Only udev events with a given tag attached will pass.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--help</option></term>
-          <listitem>
-            <para>Print help text.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-
-    <refsect2><title>udevadm test <optional>options</optional> <replaceable>devpath</replaceable></title>
-      <para>Simulate a udev event run for the given device, and print debug output.</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>--action=<replaceable>string</replaceable></option></term>
-          <listitem>
-            <para>The action string.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--subsystem=<replaceable>string</replaceable></option></term>
-          <listitem>
-            <para>The subsystem string.</para>
-          </listitem>
-        </varlistentry>
-        <varlistentry>
-          <term><option>--help</option></term>
-          <listitem>
-            <para>Print help text.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-
-    <refsect2><title>udevadm test-builtin <optional>options</optional> <replaceable>command</replaceable> <replaceable>devpath</replaceable></title>
-      <para>Run a built-in command for the given device, and print debug output.</para>
-      <variablelist>
-        <varlistentry>
-          <term><option>--help</option></term>
-          <listitem>
-            <para>Print help text.</para>
-          </listitem>
-        </varlistentry>
-      </variablelist>
-    </refsect2>
-  </refsect1>
-
-  <refsect1><title>Author</title>
-    <para>Written by Kay Sievers <email>kay.sievers@vrfy.org</email>.</para>
-  </refsect1>
-
-  <refsect1>
-    <title>See Also</title>
-    <para><citerefentry>
-        <refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum>
-    </citerefentry>
-    <citerefentry>
-        <refentrytitle>udevd</refentrytitle><manvolnum>8</manvolnum>
-    </citerefentry></para>
-  </refsect1>
-</refentry>
diff --git a/src/udev/src/udevd.xml b/src/udev/src/udevd.xml
deleted file mode 100644
index c516eb979..000000000
--- a/src/udev/src/udevd.xml
+++ /dev/null
@@ -1,151 +0,0 @@
-<?xml version='1.0'?>
-<?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?>
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
-
-<refentry id="udevd">
-  <refentryinfo>
-    <title>udevd</title>
-    <productname>udev</productname>
-  </refentryinfo>
-
-  <refmeta>
-    <refentrytitle>udevd</refentrytitle>
-    <manvolnum>8</manvolnum>
-    <refmiscinfo class="version"></refmiscinfo>
-  </refmeta>
-
-  <refnamediv>
-    <refname>udevd</refname><refpurpose>event managing daemon</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <cmdsynopsis>
-      <command>udevd</command>
-      <arg><option>--daemon</option></arg>
-      <arg><option>--debug</option></arg>
-      <arg><option>--children-max=</option></arg>
-      <arg><option>--exec-delay=</option></arg>
-      <arg><option>--resolve-names=early|late|never</option></arg>
-      <arg><option>--version</option></arg>
-      <arg><option>--help</option></arg>
-    </cmdsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1><title>Description</title>
-    <para>udevd listens to kernel uevents. For every event, udevd executes matching
-    instructions specified in udev rules. See <citerefentry>
-        <refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum>
-      </citerefentry>.</para>
-    <para>On startup the content of the directory <filename>/usr/lib/udev/devices</filename>
-    is copied to <filename>/dev</filename>. If kernel modules specify static device
-    nodes, these nodes are created even without a corresponding kernel device, to
-    allow on-demand loading of kernel modules. Matching permissions specified in udev
-    rules are applied to these static device nodes.</para>
-    <para>The behavior of the running daemon can be changed with
-    <command>udevadm control</command>.</para>
-  </refsect1>
-
-  <refsect1><title>Options</title>
-    <variablelist>
-      <varlistentry>
-        <term><option>--daemon</option></term>
-        <listitem>
-          <para>Detach and run in the background.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>--debug</option></term>
-        <listitem>
-          <para>Print debug messages to stderr.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>--children-max=</option></term>
-        <listitem>
-          <para>Limit the number of parallel executed events.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>--exec-delay=</option></term>
-        <listitem>
-          <para>Number of seconds to delay the execution of RUN instructions.
-          This might be useful when debugging system crashes during coldplug
-          cause by loading non-working kernel modules.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>--resolve-names=</option></term>
-        <listitem>
-          <para>Specify when udevd should resolve names of users and groups.
-          When set to <option>early</option> (the default) names will be
-          resolved when the rules are parsed.  When set to
-          <option>late</option> names will be resolved for every event.
-          When set to <option>never</option> names will never be resolved
-          and all devices will be owned by root.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>--version</option></term>
-        <listitem>
-          <para>Print version number.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><option>--help</option></term>
-        <listitem>
-          <para>Print help text.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1><title>Environment</title>
-    <variablelist>
-      <varlistentry>
-        <term><varname>UDEV_LOG=</varname></term>
-        <listitem>
-          <para>Set the logging priority.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
- </refsect1>
-
-  <refsect1><title>Kernel command line</title>
-    <variablelist>
-      <varlistentry>
-        <term><varname>udev.log-priority=</varname></term>
-        <listitem>
-          <para>Set the logging priority.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><varname>udev.children-max=</varname></term>
-        <listitem>
-          <para>Limit the number of parallel executed events.</para>
-        </listitem>
-      </varlistentry>
-      <varlistentry>
-        <term><varname>udev.exec-delay=</varname></term>
-        <listitem>
-          <para>Number of seconds to delay the execution of RUN instructions.
-          This might be useful when debugging system crashes during coldplug
-          cause by loading non-working kernel modules.</para>
-        </listitem>
-      </varlistentry>
-    </variablelist>
- </refsect1>
-
-  <refsect1><title>Author</title>
-    <para>Written by Kay Sievers <email>kay.sievers@vrfy.org</email>.</para>
-  </refsect1>
-
-  <refsect1>
-    <title>See Also</title>
-    <para><citerefentry>
-        <refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum>
-      </citerefentry>, <citerefentry>
-        <refentrytitle>udevadm</refentrytitle><manvolnum>8</manvolnum>
-    </citerefentry></para>
-  </refsect1>
-</refentry>
diff --git a/src/udev/src/test-libudev.c b/src/udev/test-libudev.c
index 6161fb3e3..6161fb3e3 100644
--- a/src/udev/src/test-libudev.c
+++ b/src/udev/test-libudev.c
diff --git a/src/udev/src/test-udev.c b/src/udev/test-udev.c
index c9712e974..c9712e974 100644
--- a/src/udev/src/test-udev.c
+++ b/src/udev/test-udev.c
diff --git a/src/udev/test/rules-test.sh b/src/udev/test/rules-test.sh
index 1e224ff8b..5b3acea31 100755
--- a/src/udev/test/rules-test.sh
+++ b/src/udev/test/rules-test.sh
@@ -12,4 +12,4 @@ type python >/dev/null 2>&1 || {
         exit 0
 }
 
-$srcdir/test/rule-syntax-check.py `find $srcdir/rules -name '*.rules'`
+$srcdir/src/udev/test/rule-syntax-check.py `find $srcdir/rules -name '*.rules'`
diff --git a/src/udev/src/udev-builtin-blkid.c b/src/udev/udev-builtin-blkid.c
index e57f03e5a..e57f03e5a 100644
--- a/src/udev/src/udev-builtin-blkid.c
+++ b/src/udev/udev-builtin-blkid.c
diff --git a/src/udev/src/udev-builtin-firmware.c b/src/udev/udev-builtin-firmware.c
index d212c64b4..d212c64b4 100644
--- a/src/udev/src/udev-builtin-firmware.c
+++ b/src/udev/udev-builtin-firmware.c
diff --git a/src/udev/src/udev-builtin-hwdb.c b/src/udev/udev-builtin-hwdb.c
index aa996f375..aa996f375 100644
--- a/src/udev/src/udev-builtin-hwdb.c
+++ b/src/udev/udev-builtin-hwdb.c
diff --git a/src/udev/src/udev-builtin-input_id.c b/src/udev/udev-builtin-input_id.c
index a062ef7c7..a062ef7c7 100644
--- a/src/udev/src/udev-builtin-input_id.c
+++ b/src/udev/udev-builtin-input_id.c
diff --git a/src/udev/src/udev-builtin-kmod.c b/src/udev/udev-builtin-kmod.c
index 57e813f86..57e813f86 100644
--- a/src/udev/src/udev-builtin-kmod.c
+++ b/src/udev/udev-builtin-kmod.c
diff --git a/src/udev/src/udev-builtin-path_id.c b/src/udev/udev-builtin-path_id.c
index a8559d2dd..a8559d2dd 100644
--- a/src/udev/src/udev-builtin-path_id.c
+++ b/src/udev/udev-builtin-path_id.c
diff --git a/src/udev/src/udev-builtin-usb_id.c b/src/udev/udev-builtin-usb_id.c
index 85828e32d..85828e32d 100644
--- a/src/udev/src/udev-builtin-usb_id.c
+++ b/src/udev/udev-builtin-usb_id.c
diff --git a/src/udev/src/udev-builtin.c b/src/udev/udev-builtin.c
index 5bc5fa68f..5bc5fa68f 100644
--- a/src/udev/src/udev-builtin.c
+++ b/src/udev/udev-builtin.c
diff --git a/src/udev/src/udev-ctrl.c b/src/udev/udev-ctrl.c
index 5556f1a77..5556f1a77 100644
--- a/src/udev/src/udev-ctrl.c
+++ b/src/udev/udev-ctrl.c
diff --git a/src/udev/src/udev-event.c b/src/udev/udev-event.c
index 45dd77ba2..40a6b7d33 100644
--- a/src/udev/src/udev-event.c
+++ b/src/udev/udev-event.c
@@ -727,7 +727,7 @@ int udev_event_spawn(struct udev_event *event,
 
         /* allow programs in /usr/lib/udev/ to be called without the path */
         if (argv[0][0] != '/') {
-                util_strscpyl(program, sizeof(program), PKGLIBEXECDIR "/", argv[0], NULL);
+                util_strscpyl(program, sizeof(program), UDEVLIBEXECDIR "/", argv[0], NULL);
                 argv[0] = program;
         }
 
diff --git a/src/udev/src/udev-node.c b/src/udev/udev-node.c
index 7a01a479e..7a01a479e 100644
--- a/src/udev/src/udev-node.c
+++ b/src/udev/udev-node.c
diff --git a/src/udev/src/udev-rules.c b/src/udev/udev-rules.c
index 8a85eae71..8a85eae71 100644
--- a/src/udev/src/udev-rules.c
+++ b/src/udev/udev-rules.c
diff --git a/src/udev/src/udev-watch.c b/src/udev/udev-watch.c
index 228d18fed..228d18fed 100644
--- a/src/udev/src/udev-watch.c
+++ b/src/udev/udev-watch.c
diff --git a/src/udev/src/udev.conf b/src/udev/udev.conf
index f39253eb6..f39253eb6 100644
--- a/src/udev/src/udev.conf
+++ b/src/udev/udev.conf
diff --git a/src/udev/src/udev.h b/src/udev/udev.h
index bc051c9b6..bc051c9b6 100644
--- a/src/udev/src/udev.h
+++ b/src/udev/udev.h
diff --git a/src/udev/src/udev.pc.in b/src/udev/udev.pc.in
index 0b04c02ef..0b04c02ef 100644
--- a/src/udev/src/udev.pc.in
+++ b/src/udev/udev.pc.in
diff --git a/src/udev/src/udevadm-control.c b/src/udev/udevadm-control.c
index cafa21494..cafa21494 100644
--- a/src/udev/src/udevadm-control.c
+++ b/src/udev/udevadm-control.c
diff --git a/src/udev/src/udevadm-info.c b/src/udev/udevadm-info.c
index ee9b59fea..ee9b59fea 100644
--- a/src/udev/src/udevadm-info.c
+++ b/src/udev/udevadm-info.c
diff --git a/src/udev/src/udevadm-monitor.c b/src/udev/udevadm-monitor.c
index 5997dd8e1..5997dd8e1 100644
--- a/src/udev/src/udevadm-monitor.c
+++ b/src/udev/udevadm-monitor.c
diff --git a/src/udev/src/udevadm-settle.c b/src/udev/udevadm-settle.c
index b168defd9..b168defd9 100644
--- a/src/udev/src/udevadm-settle.c
+++ b/src/udev/udevadm-settle.c
diff --git a/src/udev/src/udevadm-test-builtin.c b/src/udev/udevadm-test-builtin.c
index 3a49f7ce9..3a49f7ce9 100644
--- a/src/udev/src/udevadm-test-builtin.c
+++ b/src/udev/udevadm-test-builtin.c
diff --git a/src/udev/src/udevadm-test.c b/src/udev/udevadm-test.c
index 6275cff89..6275cff89 100644
--- a/src/udev/src/udevadm-test.c
+++ b/src/udev/udevadm-test.c
diff --git a/src/udev/src/udevadm-trigger.c b/src/udev/udevadm-trigger.c
index 3cce23dfb..3cce23dfb 100644
--- a/src/udev/src/udevadm-trigger.c
+++ b/src/udev/udevadm-trigger.c
diff --git a/src/udev/src/udevadm.c b/src/udev/udevadm.c
index 224ece0bb..224ece0bb 100644
--- a/src/udev/src/udevadm.c
+++ b/src/udev/udevadm.c
diff --git a/src/udev/src/udevd.c b/src/udev/udevd.c
index 170221790..694e75877 100644
--- a/src/udev/src/udevd.c
+++ b/src/udev/udevd.c
@@ -982,7 +982,7 @@ static void static_dev_create_from_devices(struct udev *udev, DIR *dir)
 {
         DIR *dir_from;
 
-        dir_from = opendir(PKGLIBEXECDIR "/devices");
+        dir_from = opendir(UDEVLIBEXECDIR "/devices");
         if (dir_from == NULL)
                 return;
         copy_dev_dir(udev, dir_from, dir, 8);
diff --git a/src/udev/src/v4l_id/60-persistent-v4l.rules b/src/udev/v4l_id/60-persistent-v4l.rules
index 93c5ee8c2..93c5ee8c2 100644
--- a/src/udev/src/v4l_id/60-persistent-v4l.rules
+++ b/src/udev/v4l_id/60-persistent-v4l.rules
diff --git a/src/udev/src/v4l_id/v4l_id.c b/src/udev/v4l_id/v4l_id.c
index a2a80b5f4..a2a80b5f4 100644
--- a/src/udev/src/v4l_id/v4l_id.c
+++ b/src/udev/v4l_id/v4l_id.c