blob: 976a4067a49671561b89d9918a09991ea946edc7 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
.. _faq-config:
Configuring Gammu FAQ
=====================
.. _faq-config-at:
How to configure 3G/UMTS/... modem or AT capable phone?
-------------------------------------------------------
As most modems support AT commands, this is pretty easy and you should use
``at`` :config:option:`Connection`. For :config:option:`Device` you should use
device name as modem appears in your system, for example ``/dev/ttyACM0`` or
``COM7:``.
Some modems expose more serial ports and you need to carefully choose the right
one - for example only one of them can receive USSD notifications.
.. note::
On Linux, you might have to install `usb-modeswitch`_ to make your modem
actually behave like a modem and not like a disk containing drivers for
Windows.
.. seealso:: :ref:`faq-devname`, :ref:`gammurc`
.. _usb-modeswitch: http://www.draisberghof.de/usb_modeswitch/
Example configuration on Linux:
.. code-block:: ini
[gammu]
device = /dev/ttyACM3
connection = at
Example configuration on Windows:
.. code-block:: ini
[gammu]
device = COM12:
connection = at
.. _faq-config-symbian:
How to configure Symbian based phone?
-------------------------------------
The only support for Symbian phones is using applet installed to phone and
Bluetooth connection. You should use ``blues60`` :config:option:`Connection`
and Bluetooth address of phone as :config:option:`Device`. On older Symbian
phones you will have to use gnapplet and ``bluerfgnapbus`` connection.
.. seealso:: :ref:`s60`, :ref:`gammurc`
.. note::
Do not forget to start the applet before trying to connect to the phone.
Example configuration:
.. code-block:: ini
[gammu]
device = 11:22:33:44:55:66 # Bluetooth address of your phone
connection = blues60
.. _faq-config-nokia:
How to configure Nokia phone?
-----------------------------
If you have Series 40 (S40) phone, it should work using either Bluetooth or USB
cable.
For Bluetooth connection, ``bluephonet`` :config:option:`Connection` is always
the right choice with Bluetooth address of phone as :config:option:`Device`.
For USB cable choosing the right connection type is more tricky and depends on
generation of your phone. Newest phones usually work with ``dku2`` and the
older ones with ``dlr3`` as :config:option:`Connection`.
Should you have old phone with serial cable (and USB to serial converter),
``fbus`` :config:option:`Connection` is the right one.
.. seealso:: :ref:`gammurc`
Example configuration for Bluetooth:
.. code-block:: ini
[gammu]
device = 11:22:33:44:55:66 # Bluetooth address of your phone
connection = bluephonet
Example configuration for newer phones:
.. code-block:: ini
[gammu]
connection = dku2
Example configuration for older phones on Linux:
.. code-block:: ini
[gammu]
device = /dev/ttyACM3
connection = dlr3
Example configuration for older phones on Windows:
.. code-block:: ini
[gammu]
device = COM12:
connection = dlr3
How to configure phone not listed above?
----------------------------------------
First check whether your phone is supported. In case it is, it most likely
falls into one of above categories.
You can also find additional user experiences in `Gammu Phones Database`_.
.. seealso:: :ref:`faq-phones`, :ref:`gammurc`
.. _Gammu Phones Database: http://wammu.eu/phones/
|
