diff options
author | Roger Leigh <rleigh@debian.org> | 2008-10-26 16:16:44 +0000 |
---|---|---|
committer | Roger Leigh <rleigh@debian.org> | 2008-10-26 16:16:44 +0000 |
commit | 92b02ddce00dec2787514568fa9d644d4f0350e9 (patch) | |
tree | 015c66d9d7d4298a26554d12bb84c83d5c477f0e /ChangeLog | |
parent | 3950c83c2919fe59dbf442c0d4859778fadd0e8d (diff) |
Imported Upstream version 5.0.0
Diffstat (limited to 'ChangeLog')
-rw-r--r-- | ChangeLog | 508 |
1 files changed, 508 insertions, 0 deletions
@@ -1,3 +1,511 @@ +2006-07-22 <rlk@sourceforge.net> + + Files: NEWS (1.305) (+3 -0) + src/main/escp2-driver.c (1.30) (+4 -2) + src/main/print-escp2-data.c (1.202) (+79 -79) + src/main/print-escp2.c (1.354) (+11 -1) + src/main/print-escp2.h (1.105) (+5 -2) + + Fix bottom margin for Epson R800 and R1800. + +2006-07-22 <rlk@sourceforge.net> + + Files: README (1.165) (+1 -2) + + Minor update to README. + +2006-07-20 <rlk@sourceforge.net> + + Files: po/da.po (1.72) (+5 -9) + + Another da.po update + +2006-07-20 <rlk@sourceforge.net> + + Files: po/da.po (1.71) (+16 -12) + + Updated Danish translation + +2006-07-16 <rlk@sourceforge.net> + + Files: src/gutenprintui/plist.c (1.3) (+3 -3) + + Fix problem with g_strconcat and remove one last Gimp-Print nit. + +2006-07-16 <rlk@sourceforge.net> + + Files: doc/Makefile.am (1.48) (+2 -2) + + Make install-data-local depend on the installed documentation. + +2006-07-16 <rlk@sourceforge.net> + + Files: configure.ac (1.145) (+2 -3) + + Don't print out install user's manual in config summary + +2006-07-16 <rlk@sourceforge.net> + + Files: configure.ac (1.144) (+7 -12) + doc/developer/Makefile.am (1.19) (+1 -3) + + Remove configure option for user guide + +2006-07-16 <rlk@sourceforge.net> + + Files: NEWS (1.304) (+17 -1973) + README (1.164) (+12 -306) + configure.ac (1.143) (+2 -3) + doc/Makefile.am (1.47) (+10 -11) + doc/gutenprint-users-manual.odt (1.1) (added) + doc/gutenprint-users-manual.pdf (1.1) (added) + + 1260142 User documentation needs updating for 5.0.0 + +2006-07-16 <rlk@sourceforge.net> + + Files: NEWS (1.303) (+2 -1) + + Clean up duplication. + +2006-07-16 <rlk@sourceforge.net> + + Files: NEWS (1.302) (+19 -4) + src/gutenprintui/panel.c (1.9) (+69 -59) + + Fix a problem with image rotation in the GIMP 1.2/Cinepaint plugin. + +2006-07-11 <rleigh@sourceforge.net> + + Files: doc/developer/gutenprint.xml (1.2) (+1 -1) + + doc/developer/gutenprint.xml: Use URI in DOCTYPE in place of absolute + filename. This is much more portable, and XML catalogues are now + supported on current systems. + +2006-07-08 <rlk@sourceforge.net> + + Files: src/foomatic/Makefile.am (1.50) (+7 -3) + + 1033007 Foomatic XML data generation is locale-dependent + +2006-07-07 <rleigh@sourceforge.net> + + Files: include/gutenprint/string-list.h (1.3) (+4 -4) + + include/gutenprint/string-list.h: The name and text members of the + stp_param_string_t structure should be const for use in static + initialisers. + +2006-07-07 <rleigh@sourceforge.net> + + Files: src/main/print-weave.c (1.65) (+13 -14) + + src/main/print-weave.c: stpi_softweave_t is not "logically const". + +2006-07-07 <rleigh@sourceforge.net> + + Files: include/gutenprint/string-list.h (1.2) (+4 -4) + src/main/path.c (1.19) (+3 -3) + src/main/print-list.c (1.24) (+2 -2) + src/main/sequence.c (1.22) (+2 -2) + + src/main/sequence.c: deconst_sequence is inlined. + src/main/print-list.c: deconst_list is inlined. + src/main/path.c: Fix the constness of the struct dirent pointers + passed to strcoll. + include/gutenprint/string-list.h: The name and text members of the + stp_param_string_t structure should not be const. + +2006-07-07 <rlk@sourceforge.net> + + Files: NEWS (1.301) (+3 -0) + src/main/print-pcl.c (1.144) (+41 -1) + src/main/printers.xml (1.146) (+47 -47) + + 1518131 Kyocera KM-2530 CUPS+Gutenprint PPD - A4 paper + +2006-07-06 <rlk@sourceforge.net> + + Files: NEWS (1.300) (+1 -4) + + Remove prerelease wording. + +2006-07-05 <rlk@sourceforge.net> + + Files: doc/5.0-release-plan.txt (1.10) (+37 -8) + + Update on what has been accomplished in 5.0. + +2006-07-05 <rlk@sourceforge.net> + + Files: README (1.163) (+10 -3) + + Clarify development libraries a bit more. + +2006-07-04 <rlk@sourceforge.net> + + Files: NEWS (1.299) (+3 -0) + + In the GIMP 2.4 and above (forthcoming as of Gutenprint 5.0 release), + the enhanced Print plugin will be named "Print with Gutenprint" so as + not to collide with the GtkPrint-based plugin bundled with that + version of the GIMP. The Print plugin bundled with GIMP 2.0 and 2.2 + is based on Gimp-Print 4.2; the Print plugin in this package simply + replaces the Print plugin in those versions of the GIMP. + +2006-07-04 <rlk@sourceforge.net> + + Files: po/da.po (1.70) (+249 -345) + + Updated da.po + +2006-07-04 <rlk@sourceforge.net> + + Files: NEWS (1.298) (+42 -28) + README (1.162) (+76 -58) + configure.ac (1.142) (+36 -11) + src/gimp2/Makefile.am (1.7) (+14 -3) + src/gimp2/print-gutenprint.c (1.1) (added) + src/gimp2/print-print.c (1.1) (added) + src/gimp2/print.c (1.8) (+6 -24) + src/gimp2/print_gimp.h (1.5) (+14 -1) + + In the GIMP 2.4 and above (forthcoming as of Gutenprint 5.0 release), + the enhanced Print plugin will be named "Print with Gutenprint" so as + not to collide with the GtkPrint-based plugin bundled with that + version of the GIMP. The Print plugin bundled with GIMP 2.0 and 2.2 + is based on Gimp-Print 4.2; the Print plugin in this package simply + replaces the Print plugin in those versions of the GIMP. + +2006-07-04 <rlk@sourceforge.net> + + Files: src/cups/rastertoprinter.c (1.104) (+4 -4) + src/ghost/ijsgutenprint.c (1.18) (+3 -3) + + Be a bit more defensive about printing things out. + +2006-07-01 <rlk@sourceforge.net> + + Files: src/ghost/ijsgutenprint.c (1.17) (+2 -2) + + Use safe_get_string_parameter rather than stp_get_string_parameter + when calling fprintf. + +2006-06-26 <rlk@sourceforge.net> + + Files: NEWS (1.297) (+13 -9) + + Add note that color laser printers are supported in grayscale only. + +2006-06-25 <rlk@sourceforge.net> + + Files: src/cups/rastertoprinter.c (1.103) (+7 -4) + + Another spot we attempted to print a null pointer. + +2006-06-25 <rlk@sourceforge.net> + + Files: src/cups/rastertoprinter.c (1.102) (+4 -3) + + Don't attempt to printf a null pointer (not all versions of libc will + handle this gracefully). + +2006-06-25 <rlk@sourceforge.net> + + Files: src/main/print-vars.c (1.75) (+9 -3) + + Don't attempt to copy zero bytes from a null pointer. + +2006-06-25 <rlk@sourceforge.net> + + Files: configure.ac (1.141) (+3 -3) + + Slight improvement in wording of warning message. + +2006-06-22 <rlk@sourceforge.net> + + Files: NEWS (1.296) (+3 -2) + po/hu.po (1.8) (+996 -1676) + + Update Hungarian translation + +2006-06-22 <rlk@sourceforge.net> + + Files: NEWS (1.295) (+10 -5) + src/ghost/ijsgutenprint.c (1.16) (+25 -17) + + 1501816 ijsgutenprint/foomatic only prints first page + +2006-06-04 <rleigh@sourceforge.net> + + Files: NEWS (1.294) (+367 -8) + + NEWS: Add changes between previous 5.0.0 release candidates. + +2006-06-04 <rleigh@sourceforge.net> + + Files: src/main/print-ps.c (1.87) (+29 -25) + + print-ps.c: The Postscript driver now handles PPD files with non-integer + imageable areas correctly in all locales (the PPD files certain HP inkjet + printers using the HPIJS driver have non-integer imageable areas for some + paper sizes). In 5.0.0-rc3, this was handled incorrectly in locales that + do not use the decimal point (".") for separating fractions from integers. + +2006-06-01 <rlk@sourceforge.net> + + Files: src/main/escp2-channels.c (1.62) (+3 -3) + src/main/print-escp2.c (1.353) (+12 -3) + + Make gray transitions work on R2400 + +2006-05-31 <rlk@sourceforge.net> + + Files: src/main/print-escp2-data.c (1.201) (+17 -17) + + Use unidirectional mode by default above 1440x720 on R2400 and above + 1440x1440 on R800 (yields better smoothness). + +2006-05-31 <rlk@sourceforge.net> + + Files: src/main/escp2-papers.c (1.99) (+21 -21) + + Improve matte black on R2400. + +2006-05-31 <rlk@sourceforge.net> + + Files: src/main/escp2-papers.c (1.98) (+22 -22) + + Improve matte black ink on R800. + +2006-05-31 <rleigh@sourceforge.net> + + Files: src/escputil/escputil.c (1.87) (+27 -23) + + src/escputil/escputil.c: Print a proper error message when a raw device + was not specified when needed. + +2006-05-31 <rlk@sourceforge.net> + + Files: src/cups/rastertoprinter.c (1.101) (+14 -6) + + Fix printers without borderless capability. + +2006-05-30 <rleigh@sourceforge.net> + + Files: src/cups/cups-genppdconfig.in (1.13) (+18 -153) + + src/cups/cups-genppdconfig.in: Remove perlmenu support. + +2006-05-30 <rlk@sourceforge.net> + + Files: src/cups/rastertoprinter.c (1.100) (+6 -6) + + Use the imageable area to define the margins, not the bounding box + from CUPS. + +2006-05-30 <rlk@sourceforge.net> + + Files: src/main/print-ps.c (1.86) (+3 -1) + + Don't disable PPDFile parameter when the PPD file is set. + +2006-05-29 <rleigh@sourceforge.net> + + Files: m4extra/pkg.m4 (1.1) (added) + + m4extra/pkg.m4: Add pkg-config macros. + +2006-05-29 <rleigh@sourceforge.net> + + Files: po/en_GB.po (1.143) (+997 -1691) + + Update British English translation. + +2006-05-29 <rlk@sourceforge.net> + + Files: po/cs.po (1.37) (+182 -175) + po/da.po (1.69) (+344 -248) + po/de.po (1.50) (+182 -175) + po/el.po (1.51) (+182 -175) + po/en_GB.po (1.142) (+181 -174) + po/es.po (1.49) (+182 -175) + po/fr.po (1.75) (+916 -1395) + po/hu.po (1.7) (+181 -174) + po/ja.po (1.45) (+182 -175) + po/nb.po (1.12) (+182 -175) + po/nl.po (1.51) (+182 -175) + po/pl.po (1.55) (+182 -175) + po/pt.po (1.50) (+182 -175) + po/sk.po (1.54) (+182 -175) + po/sv.po (1.82) (+361 -254) + po/zh_TW.po (1.11) (+181 -174) + + 20060528 snapshot + +2006-05-28 <rlk@sourceforge.net> + + Files: NEWS (1.293) (+39 -351) + README (1.161) (+264 -83) + configure.ac (1.140) (+18 -14) + + Start prep for 5.0.0 release + +2006-05-28 <rlk@sourceforge.net> + + Files: src/main/printers.xml (1.145) (+5 -5) + + Reorder some printers. + +2006-05-28 <rlk@sourceforge.net> + + Files: doc/Makefile.am (1.46) (+6 -1) + + Install the FAQ. + +2006-05-28 <rlk@sourceforge.net> + + Files: src/main/escp2-driver.c (1.29) (+23 -4) + src/main/print-escp2-data.c (1.200) (+82 -81) + src/main/print-escp2.c (1.352) (+116 -45) + src/main/print-escp2.h (1.104) (+6 -2) + + 1) In the Epson driver, make the cutoff for deciding whether to print + unidirectional vs. bidirectional printer-dependent rather than + always 720 DPI. Many of the newer printers do just fine printing + bidirectionally even at very high resolutions, and some actually do + better in bidirectional mode. + + 2) For determining which quality modes to make available, factor in + the extra passes as well as the horizontal and vertical + resolutions. This is because some of the newer printers can't + print at higher than 1440 DPI horizontally without slowing down by + about an order of magnitude, so we're offering high quality + (2-pass) and highest quality (4-pass) mode at 1440x2880 DPI. For + this purpose, 1440x2880 high quality would be treated as equivalent + to 2880x2880 and 1440x2880 highest quality would be treated as + equivalent to 5760x2880. This allows us to offer "super photo" and + "ultra photo" modes on the R800 and friends. + +2006-05-28 <rlk@sourceforge.net> + + Files: src/testpattern/Makefile.am (1.25) (+2 -1) + + Rebuild run-testpattern-2 if it changes. + +2006-05-28 <rlk@sourceforge.net> + + Files: src/cups/genppd.c (1.118) (+15 -17) + src/escputil/escputil.c (1.86) (+19 -19) + src/foomatic/printer_options.c (1.50) (+10 -10) + src/ghost/ijsgutenprint.c (1.15) (+3 -3) + src/gutenprintui/panel.c (1.8) (+12 -12) + src/gutenprintui/ui-utils.c (1.2) (+5 -5) + src/gutenprintui2/panel.c (1.11) (+12 -12) + src/gutenprintui2/ui-utils.c (1.3) (+5 -5) + src/main/dither-main.c (1.52) (+6 -7) + src/main/generic-options.c (1.10) (+4 -4) + src/main/print-canon.c (1.174) (+7 -7) + src/main/print-color.c (1.135) (+5 -5) + src/main/print-escp2.c (1.351) (+10 -10) + src/main/print-lexmark.c (1.154) (+6 -6) + src/main/print-olympus.c (1.59) (+5 -5) + src/main/print-pcl.c (1.143) (+6 -6) + src/main/print-ps.c (1.85) (+2 -2) + src/testpattern/printer_options.c (1.2) (+10 -10) + + Various i18n fixes. + +2006-05-28 <rlk@sourceforge.net> + + Files: po/zh_TW.po (1.10) (+2 -2) + + Fix up name of language + +2006-05-28 <rlk@sourceforge.net> + + Files: po/fr.po (1.74) (+2 -2) + po/zh_TW.po (1.9) (+2 -2) + + Fix up name of language + +2006-05-27 <rlk@sourceforge.net> + + Files: po/da.po (1.68) (+92 -196) + + Updated Danish translation + +2006-05-27 <rlk@sourceforge.net> + + Files: po/fr.po (1.73) (+2529 -3263) + + Updated French translation from Regis. + +2006-05-24 <rlk@sourceforge.net> + + Files: man/ijsgutenprint.1.in (1.4) (+14 -207) + + Remove all Gutenprint options from the man page. + +2006-05-24 <rleigh@sourceforge.net> + + Files: man/ijsgutenprint.1.in (1.3) (+17 -7) + + ijsgutenprint.1.in: Document that ijsgutenprint must be invoked via + Foomatic, and that the options documented here are not complete. + +2006-05-24 <rlk@sourceforge.net> + + Files: po/sv.po (1.81) (+1633 -2132) + + Updated Swedish translation + +2006-05-22 <rleigh@sourceforge.net> + + Files: src/cups/cups-genppdupdate.in (1.25) (+9 -7) + + cups-genppdupdate.in: Make sure egrep always has input files, otherwise + it will freeze waiting on stdin. + +2006-05-22 <tillkamppeter@sourceforge.net> + + Files: src/foomatic/foomatic-generator.in (1.60) (+21 -5) + + Assigned order parameter to the options in the Foomatic data. This way + the options can be presented in a more user-friendly order, especially + inside each group non-numerical options come first, then each + numerical option preceeded by its "Enable" option (foomatic-db-engine + CVS of May 22 2006 needed that order parameter is taken into account + in PPD build). + +2006-05-21 <rlk@sourceforge.net> + + Files: README (1.160) (+721 -450) + + First draft of Gutenprint 5.0 README. + +2006-05-18 <rlk@sourceforge.net> + + Files: po/cs.po (1.36) (+42 -27) + po/da.po (1.67) (+42 -27) + po/de.po (1.49) (+42 -27) + po/el.po (1.50) (+42 -27) + po/en_GB.po (1.141) (+42 -27) + po/es.po (1.48) (+42 -27) + po/fr.po (1.72) (+42 -27) + po/hu.po (1.6) (+42 -27) + po/ja.po (1.44) (+42 -27) + po/nb.po (1.11) (+42 -27) + po/nl.po (1.50) (+42 -27) + po/pl.po (1.54) (+42 -27) + po/pt.po (1.49) (+42 -27) + po/sk.po (1.53) (+42 -27) + po/sv.po (1.80) (+43 -28) + po/zh_TW.po (1.8) (+42 -27) + + Gutenprint 5.0.0-rc3 release + 2006-05-15 <rlk@sourceforge.net> Files: po/fr.po (1.71) (+17 -17) |